From 5febd2c04ec156e041465fbf4ce55eaf1623b65a Mon Sep 17 00:00:00 2001
From: Konrad Eisele <konrad@gaisler.com>
Date: Thu, 7 Jun 2012 08:27:23 +0200
Subject: [PATCH] parsec-config(nosubmit): Add toplevel Makefile and jpeg-8d library
 and compile rule needed by imagemagick.

Signed-off: Konrad Eisele <konrad@gaisler.com>
---
 Makefile              |   88 +
 jpeg-8d/Makefile.am   |  134 +
 jpeg-8d/Makefile.in   | 1094 ++++
 jpeg-8d/README        |  351 ++
 jpeg-8d/aclocal.m4    | 9652 ++++++++++++++++++++++++++++++
 jpeg-8d/ansi2knr.1    |   36 +
 jpeg-8d/ansi2knr.c    |  739 +++
 jpeg-8d/cderror.h     |  134 +
 jpeg-8d/cdjpeg.c      |  181 +
 jpeg-8d/cdjpeg.h      |  187 +
 jpeg-8d/change.log    |  346 ++
 jpeg-8d/cjpeg.1       |  348 ++
 jpeg-8d/cjpeg.c       |  643 ++
 jpeg-8d/ckconfig.c    |  402 ++
 jpeg-8d/coderules.txt |  118 +
 jpeg-8d/config.guess  | 1522 +++++
 jpeg-8d/config.sub    | 1771 ++++++
 jpeg-8d/configure     |15928 +++++++++++++++++++++++++++++++++++++++++++++++++
 jpeg-8d/configure.ac  |  356 ++
 jpeg-8d/depcomp       |  688 +++
 jpeg-8d/djpeg.1       |  252 +
 jpeg-8d/djpeg.c       |  617 ++
 jpeg-8d/example.c     |  433 ++
 jpeg-8d/filelist.txt  |  215 +
 jpeg-8d/install-sh    |  527 ++
 jpeg-8d/install.txt   | 1096 ++++
 jpeg-8d/jaricom.c     |  153 +
 jpeg-8d/jcapimin.c    |  288 +
 jpeg-8d/jcapistd.c    |  161 +
 jpeg-8d/jcarith.c     |  937 +++
 jpeg-8d/jccoefct.c    |  454 ++
 jpeg-8d/jccolor.c     |  490 ++
 jpeg-8d/jcdctmgr.c    |  482 ++
 jpeg-8d/jchuff.c      | 1576 +++++
 jpeg-8d/jcinit.c      |   65 +
 jpeg-8d/jcmainct.c    |  293 +
 jpeg-8d/jcmarker.c    |  682 +++
 jpeg-8d/jcmaster.c    |  858 +++
 jpeg-8d/jcomapi.c     |  106 +
 jpeg-8d/jconfig.bcc   |   48 +
 jpeg-8d/jconfig.cfg   |   53 +
 jpeg-8d/jconfig.dj    |   38 +
 jpeg-8d/jconfig.mac   |   43 +
 jpeg-8d/jconfig.manx  |   43 +
 jpeg-8d/jconfig.mc6   |   52 +
 jpeg-8d/jconfig.sas   |   43 +
 jpeg-8d/jconfig.st    |   42 +
 jpeg-8d/jconfig.txt   |  164 +
 jpeg-8d/jconfig.vc    |   45 +
 jpeg-8d/jconfig.vms   |   37 +
 jpeg-8d/jconfig.wat   |   38 +
 jpeg-8d/jcparam.c     |  632 ++
 jpeg-8d/jcprepct.c    |  358 ++
 jpeg-8d/jcsample.c    |  545 ++
 jpeg-8d/jctrans.c     |  382 ++
 jpeg-8d/jdapimin.c    |  396 ++
 jpeg-8d/jdapistd.c    |  275 +
 jpeg-8d/jdarith.c     |  776 +++
 jpeg-8d/jdatadst.c    |  267 +
 jpeg-8d/jdatasrc.c    |  275 +
 jpeg-8d/jdcoefct.c    |  741 +++
 jpeg-8d/jdcolor.c     |  512 ++
 jpeg-8d/jdct.h        |  393 ++
 jpeg-8d/jddctmgr.c    |  384 ++
 jpeg-8d/jdhuff.c      | 1541 +++++
 jpeg-8d/jdinput.c     |  661 ++
 jpeg-8d/jdmainct.c    |  512 ++
 jpeg-8d/jdmarker.c    | 1406 +++++
 jpeg-8d/jdmaster.c    |  531 ++
 jpeg-8d/jdmerge.c     |  400 ++
 jpeg-8d/jdpostct.c    |  290 +
 jpeg-8d/jdsample.c    |  361 ++
 jpeg-8d/jdtrans.c     |  140 +
 jpeg-8d/jerror.c      |  252 +
 jpeg-8d/jerror.h      |  304 +
 jpeg-8d/jfdctflt.c    |  174 +
 jpeg-8d/jfdctfst.c    |  230 +
 jpeg-8d/jfdctint.c    | 4348 ++++++++++++++
 jpeg-8d/jidctflt.c    |  235 +
 jpeg-8d/jidctfst.c    |  368 ++
 jpeg-8d/jidctint.c    | 5137 ++++++++++++++++
 jpeg-8d/jinclude.h    |   91 +
 jpeg-8d/jmemansi.c    |  167 +
 jpeg-8d/jmemdos.c     |  638 ++
 jpeg-8d/jmemdosa.asm  |  379 ++
 jpeg-8d/jmemmac.c     |  289 +
 jpeg-8d/jmemmgr.c     | 1119 ++++
 jpeg-8d/jmemname.c    |  276 +
 jpeg-8d/jmemnobs.c    |  109 +
 jpeg-8d/jmemsys.h     |  198 +
 jpeg-8d/jmorecfg.h    |  369 ++
 jpeg-8d/jpegint.h     |  426 ++
 jpeg-8d/jpeglib.h     | 1160 ++++
 jpeg-8d/jpegtran.1    |  285 +
 jpeg-8d/jpegtran.c    |  560 ++
 jpeg-8d/jquant1.c     |  857 +++
 jpeg-8d/jquant2.c     | 1311 ++++
 jpeg-8d/jutils.c      |  227 +
 jpeg-8d/jversion.h    |   14 +
 jpeg-8d/libjpeg.map   |    4 +
 jpeg-8d/libjpeg.txt   | 3085 ++++++++++
 jpeg-8d/ltmain.sh     | 9655 ++++++++++++++++++++++++++++++
 jpeg-8d/makcjpeg.st   |   36 +
 jpeg-8d/makdjpeg.st   |   36 +
 jpeg-8d/makeadsw.vc6  |   77 +
 jpeg-8d/makeasln.v10  |   33 +
 jpeg-8d/makecdep.vc6  |   82 +
 jpeg-8d/makecdsp.vc6  |  130 +
 jpeg-8d/makecfil.v10  |   69 +
 jpeg-8d/makecmak.vc6  |  159 +
 jpeg-8d/makecvcx.v10  |   76 +
 jpeg-8d/makeddep.vc6  |   82 +
 jpeg-8d/makeddsp.vc6  |  130 +
 jpeg-8d/makedfil.v10  |   69 +
 jpeg-8d/makedmak.vc6  |  159 +
 jpeg-8d/makedvcx.v10  |   76 +
 jpeg-8d/makefile.ansi |  221 +
 jpeg-8d/makefile.bcc  |  292 +
 jpeg-8d/makefile.dj   |  227 +
 jpeg-8d/makefile.manx |  221 +
 jpeg-8d/makefile.mc6  |  256 +
 jpeg-8d/makefile.mms  |  225 +
 jpeg-8d/makefile.sas  |  259 +
 jpeg-8d/makefile.unix |  235 +
 jpeg-8d/makefile.vc   |  273 +
 jpeg-8d/makefile.vms  |  142 +
 jpeg-8d/makefile.wat  |  240 +
 jpeg-8d/makejdep.vc6  |  423 ++
 jpeg-8d/makejdsp.vc6  |  285 +
 jpeg-8d/makejdsw.vc6  |   29 +
 jpeg-8d/makejfil.v10  |  186 +
 jpeg-8d/makejmak.vc6  |  425 ++
 jpeg-8d/makejsln.v10  |   17 +
 jpeg-8d/makejvcx.v10  |  112 +
 jpeg-8d/makeproj.mac  |  213 +
 jpeg-8d/makerdep.vc6  |    6 +
 jpeg-8d/makerdsp.vc6  |   78 +
 jpeg-8d/makerfil.v10  |   30 +
 jpeg-8d/makermak.vc6  |  110 +
 jpeg-8d/makervcx.v10  |   62 +
 jpeg-8d/maketdep.vc6  |   43 +
 jpeg-8d/maketdsp.vc6  |  122 +
 jpeg-8d/maketfil.v10  |   63 +
 jpeg-8d/maketmak.vc6  |  131 +
 jpeg-8d/maketvcx.v10  |   74 +
 jpeg-8d/makewdep.vc6  |    6 +
 jpeg-8d/makewdsp.vc6  |   78 +
 jpeg-8d/makewfil.v10  |   30 +
 jpeg-8d/makewmak.vc6  |  110 +
 jpeg-8d/makewvcx.v10  |   62 +
 jpeg-8d/makljpeg.st   |   68 +
 jpeg-8d/maktjpeg.st   |   30 +
 jpeg-8d/makvms.opt    |    4 +
 jpeg-8d/missing       |  376 ++
 jpeg-8d/rdbmp.c       |  480 ++
 jpeg-8d/rdcolmap.c    |  253 +
 jpeg-8d/rdgif.c       |   38 +
 jpeg-8d/rdjpgcom.1    |   63 +
 jpeg-8d/rdjpgcom.c    |  515 ++
 jpeg-8d/rdppm.c       |  459 ++
 jpeg-8d/rdrle.c       |  387 ++
 jpeg-8d/rdswitch.c    |  365 ++
 jpeg-8d/rdtarga.c     |  500 ++
 jpeg-8d/structure.txt |  941 +++
 jpeg-8d/testimg.ppm   |    4 +
 jpeg-8d/transupp.c    | 1597 +++++
 jpeg-8d/transupp.h    |  213 +
 jpeg-8d/usage.txt     |  637 ++
 jpeg-8d/wizard.txt    |  211 +
 jpeg-8d/wrbmp.c       |  442 ++
 jpeg-8d/wrgif.c       |  399 ++
 jpeg-8d/wrjpgcom.1    |  103 +
 jpeg-8d/wrjpgcom.c    |  583 ++
 jpeg-8d/wrppm.c       |  269 +
 jpeg-8d/wrrle.c       |  305 +
 jpeg-8d/wrtarga.c     |  253 +
 176 files changed, 105089 insertions(+), 0 deletions(-)
 create mode 100644 Makefile
 create mode 100644 jpeg-8d/Makefile.am
 create mode 100644 jpeg-8d/Makefile.in
 create mode 100644 jpeg-8d/README
 create mode 100644 jpeg-8d/aclocal.m4
 create mode 100644 jpeg-8d/ansi2knr.1
 create mode 100644 jpeg-8d/ansi2knr.c
 create mode 100644 jpeg-8d/cderror.h
 create mode 100644 jpeg-8d/cdjpeg.c
 create mode 100644 jpeg-8d/cdjpeg.h
 create mode 100644 jpeg-8d/change.log
 create mode 100644 jpeg-8d/cjpeg.1
 create mode 100644 jpeg-8d/cjpeg.c
 create mode 100644 jpeg-8d/ckconfig.c
 create mode 100644 jpeg-8d/coderules.txt
 create mode 100644 jpeg-8d/config.guess
 create mode 100644 jpeg-8d/config.sub
 create mode 100644 jpeg-8d/configure
 create mode 100644 jpeg-8d/configure.ac
 create mode 100644 jpeg-8d/depcomp
 create mode 100644 jpeg-8d/djpeg.1
 create mode 100644 jpeg-8d/djpeg.c
 create mode 100644 jpeg-8d/example.c
 create mode 100644 jpeg-8d/filelist.txt
 create mode 100644 jpeg-8d/install-sh
 create mode 100644 jpeg-8d/install.txt
 create mode 100644 jpeg-8d/jaricom.c
 create mode 100644 jpeg-8d/jcapimin.c
 create mode 100644 jpeg-8d/jcapistd.c
 create mode 100644 jpeg-8d/jcarith.c
 create mode 100644 jpeg-8d/jccoefct.c
 create mode 100644 jpeg-8d/jccolor.c
 create mode 100644 jpeg-8d/jcdctmgr.c
 create mode 100644 jpeg-8d/jchuff.c
 create mode 100644 jpeg-8d/jcinit.c
 create mode 100644 jpeg-8d/jcmainct.c
 create mode 100644 jpeg-8d/jcmarker.c
 create mode 100644 jpeg-8d/jcmaster.c
 create mode 100644 jpeg-8d/jcomapi.c
 create mode 100644 jpeg-8d/jconfig.bcc
 create mode 100644 jpeg-8d/jconfig.cfg
 create mode 100644 jpeg-8d/jconfig.dj
 create mode 100644 jpeg-8d/jconfig.mac
 create mode 100644 jpeg-8d/jconfig.manx
 create mode 100644 jpeg-8d/jconfig.mc6
 create mode 100644 jpeg-8d/jconfig.sas
 create mode 100644 jpeg-8d/jconfig.st
 create mode 100644 jpeg-8d/jconfig.txt
 create mode 100644 jpeg-8d/jconfig.vc
 create mode 100644 jpeg-8d/jconfig.vms
 create mode 100644 jpeg-8d/jconfig.wat
 create mode 100644 jpeg-8d/jcparam.c
 create mode 100644 jpeg-8d/jcprepct.c
 create mode 100644 jpeg-8d/jcsample.c
 create mode 100644 jpeg-8d/jctrans.c
 create mode 100644 jpeg-8d/jdapimin.c
 create mode 100644 jpeg-8d/jdapistd.c
 create mode 100644 jpeg-8d/jdarith.c
 create mode 100644 jpeg-8d/jdatadst.c
 create mode 100644 jpeg-8d/jdatasrc.c
 create mode 100644 jpeg-8d/jdcoefct.c
 create mode 100644 jpeg-8d/jdcolor.c
 create mode 100644 jpeg-8d/jdct.h
 create mode 100644 jpeg-8d/jddctmgr.c
 create mode 100644 jpeg-8d/jdhuff.c
 create mode 100644 jpeg-8d/jdinput.c
 create mode 100644 jpeg-8d/jdmainct.c
 create mode 100644 jpeg-8d/jdmarker.c
 create mode 100644 jpeg-8d/jdmaster.c
 create mode 100644 jpeg-8d/jdmerge.c
 create mode 100644 jpeg-8d/jdpostct.c
 create mode 100644 jpeg-8d/jdsample.c
 create mode 100644 jpeg-8d/jdtrans.c
 create mode 100644 jpeg-8d/jerror.c
 create mode 100644 jpeg-8d/jerror.h
 create mode 100644 jpeg-8d/jfdctflt.c
 create mode 100644 jpeg-8d/jfdctfst.c
 create mode 100644 jpeg-8d/jfdctint.c
 create mode 100644 jpeg-8d/jidctflt.c
 create mode 100644 jpeg-8d/jidctfst.c
 create mode 100644 jpeg-8d/jidctint.c
 create mode 100644 jpeg-8d/jinclude.h
 create mode 100644 jpeg-8d/jmemansi.c
 create mode 100644 jpeg-8d/jmemdos.c
 create mode 100644 jpeg-8d/jmemdosa.asm
 create mode 100644 jpeg-8d/jmemmac.c
 create mode 100644 jpeg-8d/jmemmgr.c
 create mode 100644 jpeg-8d/jmemname.c
 create mode 100644 jpeg-8d/jmemnobs.c
 create mode 100644 jpeg-8d/jmemsys.h
 create mode 100644 jpeg-8d/jmorecfg.h
 create mode 100644 jpeg-8d/jpegint.h
 create mode 100644 jpeg-8d/jpeglib.h
 create mode 100644 jpeg-8d/jpegtran.1
 create mode 100644 jpeg-8d/jpegtran.c
 create mode 100644 jpeg-8d/jquant1.c
 create mode 100644 jpeg-8d/jquant2.c
 create mode 100644 jpeg-8d/jutils.c
 create mode 100644 jpeg-8d/jversion.h
 create mode 100644 jpeg-8d/libjpeg.map
 create mode 100644 jpeg-8d/libjpeg.txt
 create mode 100644 jpeg-8d/ltmain.sh
 create mode 100644 jpeg-8d/makcjpeg.st
 create mode 100644 jpeg-8d/makdjpeg.st
 create mode 100644 jpeg-8d/makeadsw.vc6
 create mode 100644 jpeg-8d/makeasln.v10
 create mode 100644 jpeg-8d/makecdep.vc6
 create mode 100644 jpeg-8d/makecdsp.vc6
 create mode 100644 jpeg-8d/makecfil.v10
 create mode 100644 jpeg-8d/makecmak.vc6
 create mode 100644 jpeg-8d/makecvcx.v10
 create mode 100644 jpeg-8d/makeddep.vc6
 create mode 100644 jpeg-8d/makeddsp.vc6
 create mode 100644 jpeg-8d/makedfil.v10
 create mode 100644 jpeg-8d/makedmak.vc6
 create mode 100644 jpeg-8d/makedvcx.v10
 create mode 100644 jpeg-8d/makefile.ansi
 create mode 100644 jpeg-8d/makefile.bcc
 create mode 100644 jpeg-8d/makefile.dj
 create mode 100644 jpeg-8d/makefile.manx
 create mode 100644 jpeg-8d/makefile.mc6
 create mode 100644 jpeg-8d/makefile.mms
 create mode 100644 jpeg-8d/makefile.sas
 create mode 100644 jpeg-8d/makefile.unix
 create mode 100644 jpeg-8d/makefile.vc
 create mode 100644 jpeg-8d/makefile.vms
 create mode 100644 jpeg-8d/makefile.wat
 create mode 100644 jpeg-8d/makejdep.vc6
 create mode 100644 jpeg-8d/makejdsp.vc6
 create mode 100644 jpeg-8d/makejdsw.vc6
 create mode 100644 jpeg-8d/makejfil.v10
 create mode 100644 jpeg-8d/makejmak.vc6
 create mode 100644 jpeg-8d/makejsln.v10
 create mode 100644 jpeg-8d/makejvcx.v10
 create mode 100644 jpeg-8d/makeproj.mac
 create mode 100644 jpeg-8d/makerdep.vc6
 create mode 100644 jpeg-8d/makerdsp.vc6
 create mode 100644 jpeg-8d/makerfil.v10
 create mode 100644 jpeg-8d/makermak.vc6
 create mode 100644 jpeg-8d/makervcx.v10
 create mode 100644 jpeg-8d/maketdep.vc6
 create mode 100644 jpeg-8d/maketdsp.vc6
 create mode 100644 jpeg-8d/maketfil.v10
 create mode 100644 jpeg-8d/maketmak.vc6
 create mode 100644 jpeg-8d/maketvcx.v10
 create mode 100644 jpeg-8d/makewdep.vc6
 create mode 100644 jpeg-8d/makewdsp.vc6
 create mode 100644 jpeg-8d/makewfil.v10
 create mode 100644 jpeg-8d/makewmak.vc6
 create mode 100644 jpeg-8d/makewvcx.v10
 create mode 100644 jpeg-8d/makljpeg.st
 create mode 100644 jpeg-8d/maktjpeg.st
 create mode 100644 jpeg-8d/makvms.opt
 create mode 100644 jpeg-8d/missing
 create mode 100644 jpeg-8d/rdbmp.c
 create mode 100644 jpeg-8d/rdcolmap.c
 create mode 100644 jpeg-8d/rdgif.c
 create mode 100644 jpeg-8d/rdjpgcom.1
 create mode 100644 jpeg-8d/rdjpgcom.c
 create mode 100644 jpeg-8d/rdppm.c
 create mode 100644 jpeg-8d/rdrle.c
 create mode 100644 jpeg-8d/rdswitch.c
 create mode 100644 jpeg-8d/rdtarga.c
 create mode 100644 jpeg-8d/structure.txt
 create mode 100644 jpeg-8d/testimg.ppm
 create mode 100644 jpeg-8d/transupp.c
 create mode 100644 jpeg-8d/transupp.h
 create mode 100644 jpeg-8d/usage.txt
 create mode 100644 jpeg-8d/wizard.txt
 create mode 100644 jpeg-8d/wrbmp.c
 create mode 100644 jpeg-8d/wrgif.c
 create mode 100644 jpeg-8d/wrjpgcom.1
 create mode 100644 jpeg-8d/wrjpgcom.c
 create mode 100644 jpeg-8d/wrppm.c
 create mode 100644 jpeg-8d/wrrle.c
 create mode 100644 jpeg-8d/wrtarga.c

diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..0daac83
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,88 @@
+all: compile
+
+PARSEC_ENV=cd parsec-2.1; source env.sh;
+PARSEC_PCK_ALL=blackscholes bodytrack canneal dedup facesim ferret fluidanimate freqmine streamcluster swaptions vips x264
+PARSEC_CONFIG=hfleonv8-cross-gcc
+PARSEC_BUILD=parsecmgmt -a build -c $(PARSEC_CONFIG)
+compile:
+	$(PARSEC_ENV)$(PARSEC_BUILD) -p $(PARSEC_PCK_ALL) 2>&1 | tee .log_parsec_build.all.txt
+	make status
+
+PARSEC_CLEAN=parsecmgmt -a fullclean 
+PARSEC_UNISTALL=parsecmgmt -a fulluninstall 
+clean:
+	$(PARSEC_ENV)$(PARSEC_CLEAN) -p all
+	$(PARSEC_ENV)$(PARSEC_UNISTALL) -p all
+
+PARSEC_STATUS=parsecmgmt -a status 
+status:
+	$(PARSEC_ENV)$(PARSEC_STATUS) -p all
+
+# single target comfort rules
+compile-canneal:
+	$(PARSEC_ENV)$(PARSEC_BUILD) -p canneal 2>&1 | tee .log_parsec_build.canneal.txt
+
+compile-glib:
+	$(PARSEC_ENV)$(PARSEC_BUILD) -p glib 2>&1 | tee .log_parsec_build.glib.txt
+
+dedup-compile:
+	$(PARSEC_ENV)parsecmgmt -a fullclean -p dedup
+	$(PARSEC_ENV)parsecmgmt -a fulluninstall -p dedup
+	make compile
+
+magick-compile:
+	$(PARSEC_ENV)parsecmgmt -a fullclean -p imagick
+	$(PARSEC_ENV)parsecmgmt -a fulluninstall -p imagick
+	make compile 2>&1 | tee magick-compile.log
+
+raytrace-compile:
+	$(PARSEC_ENV)parsecmgmt -a fullclean -p raytrace
+	$(PARSEC_ENV)parsecmgmt -a fulluninstall -p raytrace
+	$(PARSEC_ENV)$(PARSEC_BUILD) -p raytrace 2>&1 | tee raytrace-compile.log
+
+raytrace-compile-only:
+	$(PARSEC_ENV)$(PARSEC_BUILD) -p raytrace 2>&1 | tee raytrace-compile-only.log
+
+ferret-compile:
+	$(PARSEC_ENV)parsecmgmt -a fullclean -p ferret
+	$(PARSEC_ENV)parsecmgmt -a fulluninstall -p ferret
+	make compile 2>&1 | tee ferret-compile.log
+
+canneal-compile:
+	$(PARSEC_ENV)parsecmgmt -a fullclean -p canneal
+	$(PARSEC_ENV)parsecmgmt -a fulluninstall -p canneal
+	make compile 2>&1 | tee ferret-compile.log
+	cd parsec-2.1/pkgs/kernels/canneal/inst/hfleonv8-linux/bin/;\
+		sparc-elf-objdump -d -l -S canneal > canneal.dis
+
+swaptions-compile:
+	$(PARSEC_ENV)parsecmgmt -a fullclean -p swaptions
+	$(PARSEC_ENV)parsecmgmt -a fulluninstall -p swaptions
+	make compile 2>&1 | tee swaptions-compile.log
+
+
+# compile libjpeg into /opt/sparc-linux-4.4.2-toolchains/multilib/sparc-leon-linux-gnu/sys-root/
+libjpeg: libjpeg-configure libjpeg-compile libjpeg-install
+
+libjpeg-configure:
+	mkdir -p $(CURDIR)/jpeg-8d-install
+	cd jpeg-8d; \
+	CC=sparc-linux-gcc ./configure --host=sparc-linux \
+	--disable-shared --prefix=$(CURDIR)/jpeg-8d-install
+
+libjpeg-compile:
+	cd jpeg-8d; \
+	CC=sparc-linux-gcc make
+
+libjpeg-install:
+	cd jpeg-8d; \
+	CC=sparc-linux-gcc make install
+
+libjpeg-clean:
+	cd jpeg-8d; \
+	CC=sparc-linux-gcc make clean
+
+libjpeg-copy: libjpeg
+	cp $(CURDIR)/jpeg-8d-install/lib/libjpeg.a /opt/sparc-linux-4.4.2-toolchains/multilib/sparc-leon-linux-gnu/sys-root/lib/
+	cp $(CURDIR)/jpeg-8d-install/include/*.h /opt/sparc-linux-4.4.2-toolchains/multilib/sparc-leon-linux-gnu/sys-root/usr/include/
+
diff --git a/jpeg-8d/Makefile.am b/jpeg-8d/Makefile.am
new file mode 100644
index 0000000..42cff57
--- /dev/null
+++ b/jpeg-8d/Makefile.am
@@ -0,0 +1,134 @@
+## Process this file with automake to produce Makefile.in
+#
+#  Automake Makefile for the JPEG library
+#
+#  This file is written by Bob Friesenhahn, Guido Vollbeding
+#
+
+# Sources to build library
+LIBSOURCES = jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c @MEMORYMGR@.c
+
+# System dependent sources
+SYSDEPSOURCES = jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+
+# Headers which are installed to support the library
+INSTINCLUDES  = jerror.h jmorecfg.h jpeglib.h
+
+# Headers which are not installed
+OTHERINCLUDES = cderror.h cdjpeg.h jdct.h jinclude.h jmemsys.h jpegint.h \
+        jversion.h transupp.h
+
+# Manual pages (Automake uses 'MANS' for itself)
+DISTMANS= cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1
+
+# Other documentation files
+DOCS= README install.txt usage.txt wizard.txt example.c libjpeg.txt \
+        structure.txt coderules.txt filelist.txt change.log
+
+# Makefiles for various systems
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makefile.mms makefile.vms makvms.opt
+
+# Configuration files
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+
+# Support scripts for configure
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+
+# Miscellaneous support files
+OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
+        libjpeg.map
+
+# Test support files
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+
+# libtool libraries to build
+lib_LTLIBRARIES = libjpeg.la
+
+# Library sources for libjpeg.la
+libjpeg_la_SOURCES = $(LIBSOURCES)
+
+# LDFLAGS for libjpeg.la
+libjpeg_la_LDFLAGS = -no-undefined \
+        -version-info $(JPEG_LIB_VERSION)
+
+if HAVE_LD_VERSION_SCRIPT
+  libjpeg_la_LDFLAGS += -Wl,--version-script=$(srcdir)/libjpeg.map
+endif
+
+# Executables to build
+bin_PROGRAMS = cjpeg djpeg jpegtran rdjpgcom wrjpgcom
+
+# Executable sources & libs
+cjpeg_SOURCES    = cjpeg.c rdppm.c rdgif.c rdtarga.c rdrle.c rdbmp.c \
+        rdswitch.c cdjpeg.c
+cjpeg_LDADD      = libjpeg.la
+djpeg_SOURCES    = djpeg.c wrppm.c wrgif.c wrtarga.c wrrle.c wrbmp.c \
+        rdcolmap.c cdjpeg.c
+djpeg_LDADD      = libjpeg.la
+jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c
+jpegtran_LDADD   = libjpeg.la
+rdjpgcom_SOURCES = rdjpgcom.c
+wrjpgcom_SOURCES = wrjpgcom.c
+
+# Manual pages to install
+man_MANS = $(DISTMANS)
+
+# Headers to install
+include_HEADERS = $(INSTINCLUDES)
+
+# Other distributed headers
+noinst_HEADERS = $(OTHERINCLUDES)
+
+# Other distributed files
+EXTRA_DIST =  $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \
+        $(OTHERFILES) $(TESTFILES)
+
+# Files to be cleaned
+CLEANFILES = testout.ppm testout.bmp testout.jpg testoutp.ppm testoutp.jpg \
+        testoutt.jpg
+
+# Install jconfig.h
+install-data-local:
+	$(mkinstalldirs) $(DESTDIR)$(includedir)
+	$(INSTALL_HEADER) jconfig.h $(DESTDIR)$(includedir)/jconfig.h
+
+# Uninstall jconfig.h
+uninstall-local:
+	rm -f $(DESTDIR)$(includedir)/jconfig.h
+
+# Run tests
+test: check-local
+check-local:
+	rm -f testout*
+	./djpeg -dct int -ppm -outfile testout.ppm  $(srcdir)/testorig.jpg
+	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  $(srcdir)/testorig.jpg
+	./cjpeg -dct int -outfile testout.jpg  $(srcdir)/testimg.ppm
+	./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg
+	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm
+	./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg
+	cmp $(srcdir)/testimg.ppm testout.ppm
+	cmp $(srcdir)/testimg.bmp testout.bmp
+	cmp $(srcdir)/testimg.jpg testout.jpg
+	cmp $(srcdir)/testimg.ppm testoutp.ppm
+	cmp $(srcdir)/testimgp.jpg testoutp.jpg
+	cmp $(srcdir)/testorig.jpg testoutt.jpg
diff --git a/jpeg-8d/Makefile.in b/jpeg-8d/Makefile.in
new file mode 100644
index 0000000..5bda1fb
--- /dev/null
+++ b/jpeg-8d/Makefile.in
@@ -0,0 +1,1094 @@
+# Makefile.in generated by automake 1.11.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+#  Automake Makefile for the JPEG library
+#
+#  This file is written by Bob Friesenhahn, Guido Vollbeding
+#
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+ANSI2KNR = @ANSI2KNR@
+@HAVE_LD_VERSION_SCRIPT_TRUE@am__append_1 = -Wl,--version-script=$(srcdir)/libjpeg.map
+bin_PROGRAMS = cjpeg$(EXEEXT) djpeg$(EXEEXT) jpegtran$(EXEEXT) \
+	rdjpgcom$(EXEEXT) wrjpgcom$(EXEEXT)
+subdir = .
+DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/configure $(am__configure_deps) \
+	$(srcdir)/jconfig.cfg ansi2knr.c ansi2knr.1 depcomp \
+	$(include_HEADERS) $(noinst_HEADERS)
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = jconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
+	"$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libjpeg_la_LIBADD =
+am__objects_1 = jaricom$U.lo jcapimin$U.lo jcapistd$U.lo jcarith$U.lo \
+	jccoefct$U.lo jccolor$U.lo jcdctmgr$U.lo jchuff$U.lo \
+	jcinit$U.lo jcmainct$U.lo jcmarker$U.lo jcmaster$U.lo \
+	jcomapi$U.lo jcparam$U.lo jcprepct$U.lo jcsample$U.lo \
+	jctrans$U.lo jdapimin$U.lo jdapistd$U.lo jdarith$U.lo \
+	jdatadst$U.lo jdatasrc$U.lo jdcoefct$U.lo jdcolor$U.lo \
+	jddctmgr$U.lo jdhuff$U.lo jdinput$U.lo jdmainct$U.lo \
+	jdmarker$U.lo jdmaster$U.lo jdmerge$U.lo jdpostct$U.lo \
+	jdsample$U.lo jdtrans$U.lo jerror$U.lo jfdctflt$U.lo \
+	jfdctfst$U.lo jfdctint$U.lo jidctflt$U.lo jidctfst$U.lo \
+	jidctint$U.lo jquant1$U.lo jquant2$U.lo jutils$U.lo \
+	jmemmgr$U.lo @MEMORYMGR@$U.lo
+am_libjpeg_la_OBJECTS = $(am__objects_1)
+libjpeg_la_OBJECTS = $(am_libjpeg_la_OBJECTS)
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+libjpeg_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libjpeg_la_LDFLAGS) $(LDFLAGS) -o $@
+PROGRAMS = $(bin_PROGRAMS)
+am_cjpeg_OBJECTS = cjpeg$U.$(OBJEXT) rdppm$U.$(OBJEXT) \
+	rdgif$U.$(OBJEXT) rdtarga$U.$(OBJEXT) rdrle$U.$(OBJEXT) \
+	rdbmp$U.$(OBJEXT) rdswitch$U.$(OBJEXT) cdjpeg$U.$(OBJEXT)
+cjpeg_OBJECTS = $(am_cjpeg_OBJECTS)
+cjpeg_DEPENDENCIES = libjpeg.la
+am_djpeg_OBJECTS = djpeg$U.$(OBJEXT) wrppm$U.$(OBJEXT) \
+	wrgif$U.$(OBJEXT) wrtarga$U.$(OBJEXT) wrrle$U.$(OBJEXT) \
+	wrbmp$U.$(OBJEXT) rdcolmap$U.$(OBJEXT) cdjpeg$U.$(OBJEXT)
+djpeg_OBJECTS = $(am_djpeg_OBJECTS)
+djpeg_DEPENDENCIES = libjpeg.la
+am_jpegtran_OBJECTS = jpegtran$U.$(OBJEXT) rdswitch$U.$(OBJEXT) \
+	cdjpeg$U.$(OBJEXT) transupp$U.$(OBJEXT)
+jpegtran_OBJECTS = $(am_jpegtran_OBJECTS)
+jpegtran_DEPENDENCIES = libjpeg.la
+am_rdjpgcom_OBJECTS = rdjpgcom$U.$(OBJEXT)
+rdjpgcom_OBJECTS = $(am_rdjpgcom_OBJECTS)
+rdjpgcom_LDADD = $(LDADD)
+am_wrjpgcom_OBJECTS = wrjpgcom$U.$(OBJEXT)
+wrjpgcom_OBJECTS = $(am_wrjpgcom_OBJECTS)
+wrjpgcom_LDADD = $(LDADD)
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC    " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD  " $@;
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN   " $@;
+SOURCES = $(libjpeg_la_SOURCES) $(cjpeg_SOURCES) $(djpeg_SOURCES) \
+	$(jpegtran_SOURCES) $(rdjpgcom_SOURCES) $(wrjpgcom_SOURCES)
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+HEADERS = $(include_HEADERS) $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+JPEG_LIB_VERSION = @JPEG_LIB_VERSION@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MEMORYMGR = @MEMORYMGR@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+U = @U@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Sources to build library
+LIBSOURCES = jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c @MEMORYMGR@.c
+
+
+# System dependent sources
+SYSDEPSOURCES = jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+
+# Headers which are installed to support the library
+INSTINCLUDES = jerror.h jmorecfg.h jpeglib.h
+
+# Headers which are not installed
+OTHERINCLUDES = cderror.h cdjpeg.h jdct.h jinclude.h jmemsys.h jpegint.h \
+        jversion.h transupp.h
+
+
+# Manual pages (Automake uses 'MANS' for itself)
+DISTMANS = cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1
+
+# Other documentation files
+DOCS = README install.txt usage.txt wizard.txt example.c libjpeg.txt \
+        structure.txt coderules.txt filelist.txt change.log
+
+
+# Makefiles for various systems
+MKFILES = configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makefile.mms makefile.vms makvms.opt
+
+
+# Configuration files
+CONFIGFILES = jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+
+
+# Support scripts for configure
+CONFIGUREFILES = config.guess config.sub install-sh ltmain.sh depcomp missing
+
+# Miscellaneous support files
+OTHERFILES = jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
+        libjpeg.map
+
+
+# Test support files
+TESTFILES = testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+
+
+# libtool libraries to build
+lib_LTLIBRARIES = libjpeg.la
+
+# Library sources for libjpeg.la
+libjpeg_la_SOURCES = $(LIBSOURCES)
+
+# LDFLAGS for libjpeg.la
+libjpeg_la_LDFLAGS = -no-undefined -version-info $(JPEG_LIB_VERSION) \
+	$(am__append_1)
+
+# Executable sources & libs
+cjpeg_SOURCES = cjpeg.c rdppm.c rdgif.c rdtarga.c rdrle.c rdbmp.c \
+        rdswitch.c cdjpeg.c
+
+cjpeg_LDADD = libjpeg.la
+djpeg_SOURCES = djpeg.c wrppm.c wrgif.c wrtarga.c wrrle.c wrbmp.c \
+        rdcolmap.c cdjpeg.c
+
+djpeg_LDADD = libjpeg.la
+jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c
+jpegtran_LDADD = libjpeg.la
+rdjpgcom_SOURCES = rdjpgcom.c
+wrjpgcom_SOURCES = wrjpgcom.c
+
+# Manual pages to install
+man_MANS = $(DISTMANS)
+
+# Headers to install
+include_HEADERS = $(INSTINCLUDES)
+
+# Other distributed headers
+noinst_HEADERS = $(OTHERINCLUDES)
+
+# Other distributed files
+EXTRA_DIST = $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \
+        $(OTHERFILES) $(TESTFILES)
+
+
+# Files to be cleaned
+CLEANFILES = testout.ppm testout.bmp testout.jpg testoutp.ppm testoutp.jpg \
+        testoutt.jpg
+
+all: jconfig.h
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+am--refresh: Makefile
+	@:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+jconfig.h: stamp-h1
+	@if test ! -f $@; then rm -f stamp-h1; else :; fi
+	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+
+stamp-h1: $(srcdir)/jconfig.cfg $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status jconfig.h
+$(srcdir)/jconfig.cfg: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f jconfig.h stamp-h1
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libjpeg.la: $(libjpeg_la_OBJECTS) $(libjpeg_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(libjpeg_la_LINK) -rpath $(libdir) $(libjpeg_la_OBJECTS) $(libjpeg_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+cjpeg$(EXEEXT): $(cjpeg_OBJECTS) $(cjpeg_DEPENDENCIES) 
+	@rm -f cjpeg$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(cjpeg_OBJECTS) $(cjpeg_LDADD) $(LIBS)
+djpeg$(EXEEXT): $(djpeg_OBJECTS) $(djpeg_DEPENDENCIES) 
+	@rm -f djpeg$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(djpeg_OBJECTS) $(djpeg_LDADD) $(LIBS)
+jpegtran$(EXEEXT): $(jpegtran_OBJECTS) $(jpegtran_DEPENDENCIES) 
+	@rm -f jpegtran$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(jpegtran_OBJECTS) $(jpegtran_LDADD) $(LIBS)
+rdjpgcom$(EXEEXT): $(rdjpgcom_OBJECTS) $(rdjpgcom_DEPENDENCIES) 
+	@rm -f rdjpgcom$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(rdjpgcom_OBJECTS) $(rdjpgcom_LDADD) $(LIBS)
+wrjpgcom$(EXEEXT): $(wrjpgcom_OBJECTS) $(wrjpgcom_DEPENDENCIES) 
+	@rm -f wrjpgcom$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(wrjpgcom_OBJECTS) $(wrjpgcom_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+./ansi2knr: ansi2knr.$(OBJEXT)
+	$(LINK) ansi2knr.$(OBJEXT) $(LIBS)
+ansi2knr.$(OBJEXT): $(CONFIG_HEADER)
+
+clean-krextra:
+	-rm -f ansi2knr
+
+mostlyclean-kr:
+	-test "$U" = "" || rm -f *_.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/@MEMORYMGR@$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cdjpeg$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cjpeg$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/djpeg$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jaricom$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapimin$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcapistd$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcarith$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccoefct$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jccolor$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcdctmgr$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jchuff$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcinit$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmainct$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmarker$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcmaster$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcomapi$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcparam$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcprepct$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jcsample$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jctrans$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapimin$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdapistd$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdarith$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatadst$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdatasrc$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcoefct$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdcolor$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jddctmgr$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdhuff$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdinput$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmainct$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmarker$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmaster$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdmerge$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdpostct$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdsample$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jdtrans$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jerror$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctflt$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctfst$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfdctint$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctflt$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctfst$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jidctint$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jmemmgr$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jpegtran$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant1$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jquant2$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jutils$U.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdbmp$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdcolmap$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdgif$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdjpgcom$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdppm$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdrle$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdswitch$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rdtarga$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/transupp$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrbmp$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrgif$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrjpgcom$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrppm$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrrle$U.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wrtarga$U.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+@MEMORYMGR@_.c: @MEMORYMGR@.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/@MEMORYMGR@.c; then echo $(srcdir)/@MEMORYMGR@.c; else echo @MEMORYMGR@.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+cdjpeg_.c: cdjpeg.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/cdjpeg.c; then echo $(srcdir)/cdjpeg.c; else echo cdjpeg.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+cjpeg_.c: cjpeg.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/cjpeg.c; then echo $(srcdir)/cjpeg.c; else echo cjpeg.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+djpeg_.c: djpeg.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/djpeg.c; then echo $(srcdir)/djpeg.c; else echo djpeg.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jaricom_.c: jaricom.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jaricom.c; then echo $(srcdir)/jaricom.c; else echo jaricom.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jcapimin_.c: jcapimin.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcapimin.c; then echo $(srcdir)/jcapimin.c; else echo jcapimin.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jcapistd_.c: jcapistd.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcapistd.c; then echo $(srcdir)/jcapistd.c; else echo jcapistd.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jcarith_.c: jcarith.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcarith.c; then echo $(srcdir)/jcarith.c; else echo jcarith.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jccoefct_.c: jccoefct.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jccoefct.c; then echo $(srcdir)/jccoefct.c; else echo jccoefct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jccolor_.c: jccolor.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jccolor.c; then echo $(srcdir)/jccolor.c; else echo jccolor.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jcdctmgr_.c: jcdctmgr.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcdctmgr.c; then echo $(srcdir)/jcdctmgr.c; else echo jcdctmgr.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jchuff_.c: jchuff.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jchuff.c; then echo $(srcdir)/jchuff.c; else echo jchuff.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jcinit_.c: jcinit.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcinit.c; then echo $(srcdir)/jcinit.c; else echo jcinit.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jcmainct_.c: jcmainct.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcmainct.c; then echo $(srcdir)/jcmainct.c; else echo jcmainct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jcmarker_.c: jcmarker.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcmarker.c; then echo $(srcdir)/jcmarker.c; else echo jcmarker.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jcmaster_.c: jcmaster.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcmaster.c; then echo $(srcdir)/jcmaster.c; else echo jcmaster.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jcomapi_.c: jcomapi.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcomapi.c; then echo $(srcdir)/jcomapi.c; else echo jcomapi.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jcparam_.c: jcparam.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcparam.c; then echo $(srcdir)/jcparam.c; else echo jcparam.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jcprepct_.c: jcprepct.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcprepct.c; then echo $(srcdir)/jcprepct.c; else echo jcprepct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jcsample_.c: jcsample.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jcsample.c; then echo $(srcdir)/jcsample.c; else echo jcsample.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jctrans_.c: jctrans.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jctrans.c; then echo $(srcdir)/jctrans.c; else echo jctrans.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdapimin_.c: jdapimin.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdapimin.c; then echo $(srcdir)/jdapimin.c; else echo jdapimin.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdapistd_.c: jdapistd.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdapistd.c; then echo $(srcdir)/jdapistd.c; else echo jdapistd.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdarith_.c: jdarith.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdarith.c; then echo $(srcdir)/jdarith.c; else echo jdarith.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdatadst_.c: jdatadst.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdatadst.c; then echo $(srcdir)/jdatadst.c; else echo jdatadst.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdatasrc_.c: jdatasrc.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdatasrc.c; then echo $(srcdir)/jdatasrc.c; else echo jdatasrc.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdcoefct_.c: jdcoefct.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdcoefct.c; then echo $(srcdir)/jdcoefct.c; else echo jdcoefct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdcolor_.c: jdcolor.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdcolor.c; then echo $(srcdir)/jdcolor.c; else echo jdcolor.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jddctmgr_.c: jddctmgr.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jddctmgr.c; then echo $(srcdir)/jddctmgr.c; else echo jddctmgr.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdhuff_.c: jdhuff.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdhuff.c; then echo $(srcdir)/jdhuff.c; else echo jdhuff.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdinput_.c: jdinput.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdinput.c; then echo $(srcdir)/jdinput.c; else echo jdinput.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdmainct_.c: jdmainct.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdmainct.c; then echo $(srcdir)/jdmainct.c; else echo jdmainct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdmarker_.c: jdmarker.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdmarker.c; then echo $(srcdir)/jdmarker.c; else echo jdmarker.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdmaster_.c: jdmaster.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdmaster.c; then echo $(srcdir)/jdmaster.c; else echo jdmaster.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdmerge_.c: jdmerge.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdmerge.c; then echo $(srcdir)/jdmerge.c; else echo jdmerge.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdpostct_.c: jdpostct.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdpostct.c; then echo $(srcdir)/jdpostct.c; else echo jdpostct.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdsample_.c: jdsample.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdsample.c; then echo $(srcdir)/jdsample.c; else echo jdsample.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jdtrans_.c: jdtrans.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jdtrans.c; then echo $(srcdir)/jdtrans.c; else echo jdtrans.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jerror_.c: jerror.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jerror.c; then echo $(srcdir)/jerror.c; else echo jerror.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jfdctflt_.c: jfdctflt.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jfdctflt.c; then echo $(srcdir)/jfdctflt.c; else echo jfdctflt.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jfdctfst_.c: jfdctfst.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jfdctfst.c; then echo $(srcdir)/jfdctfst.c; else echo jfdctfst.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jfdctint_.c: jfdctint.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jfdctint.c; then echo $(srcdir)/jfdctint.c; else echo jfdctint.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jidctflt_.c: jidctflt.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jidctflt.c; then echo $(srcdir)/jidctflt.c; else echo jidctflt.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jidctfst_.c: jidctfst.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jidctfst.c; then echo $(srcdir)/jidctfst.c; else echo jidctfst.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jidctint_.c: jidctint.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jidctint.c; then echo $(srcdir)/jidctint.c; else echo jidctint.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jmemmgr_.c: jmemmgr.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jmemmgr.c; then echo $(srcdir)/jmemmgr.c; else echo jmemmgr.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jpegtran_.c: jpegtran.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jpegtran.c; then echo $(srcdir)/jpegtran.c; else echo jpegtran.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jquant1_.c: jquant1.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jquant1.c; then echo $(srcdir)/jquant1.c; else echo jquant1.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jquant2_.c: jquant2.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jquant2.c; then echo $(srcdir)/jquant2.c; else echo jquant2.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+jutils_.c: jutils.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/jutils.c; then echo $(srcdir)/jutils.c; else echo jutils.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+rdbmp_.c: rdbmp.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdbmp.c; then echo $(srcdir)/rdbmp.c; else echo rdbmp.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+rdcolmap_.c: rdcolmap.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdcolmap.c; then echo $(srcdir)/rdcolmap.c; else echo rdcolmap.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+rdgif_.c: rdgif.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdgif.c; then echo $(srcdir)/rdgif.c; else echo rdgif.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+rdjpgcom_.c: rdjpgcom.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdjpgcom.c; then echo $(srcdir)/rdjpgcom.c; else echo rdjpgcom.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+rdppm_.c: rdppm.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdppm.c; then echo $(srcdir)/rdppm.c; else echo rdppm.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+rdrle_.c: rdrle.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdrle.c; then echo $(srcdir)/rdrle.c; else echo rdrle.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+rdswitch_.c: rdswitch.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdswitch.c; then echo $(srcdir)/rdswitch.c; else echo rdswitch.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+rdtarga_.c: rdtarga.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/rdtarga.c; then echo $(srcdir)/rdtarga.c; else echo rdtarga.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+transupp_.c: transupp.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/transupp.c; then echo $(srcdir)/transupp.c; else echo transupp.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+wrbmp_.c: wrbmp.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrbmp.c; then echo $(srcdir)/wrbmp.c; else echo wrbmp.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+wrgif_.c: wrgif.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrgif.c; then echo $(srcdir)/wrgif.c; else echo wrgif.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+wrjpgcom_.c: wrjpgcom.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrjpgcom.c; then echo $(srcdir)/wrjpgcom.c; else echo wrjpgcom.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+wrppm_.c: wrppm.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrppm.c; then echo $(srcdir)/wrppm.c; else echo wrppm.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+wrrle_.c: wrrle.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrrle.c; then echo $(srcdir)/wrrle.c; else echo wrrle.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+wrtarga_.c: wrtarga.c $(ANSI2KNR)
+	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/wrtarga.c; then echo $(srcdir)/wrtarga.c; else echo wrtarga.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > $@ || rm -f $@
+@MEMORYMGR@_.$(OBJEXT) @MEMORYMGR@_.lo cdjpeg_.$(OBJEXT) cdjpeg_.lo \
+cjpeg_.$(OBJEXT) cjpeg_.lo djpeg_.$(OBJEXT) djpeg_.lo \
+jaricom_.$(OBJEXT) jaricom_.lo jcapimin_.$(OBJEXT) jcapimin_.lo \
+jcapistd_.$(OBJEXT) jcapistd_.lo jcarith_.$(OBJEXT) jcarith_.lo \
+jccoefct_.$(OBJEXT) jccoefct_.lo jccolor_.$(OBJEXT) jccolor_.lo \
+jcdctmgr_.$(OBJEXT) jcdctmgr_.lo jchuff_.$(OBJEXT) jchuff_.lo \
+jcinit_.$(OBJEXT) jcinit_.lo jcmainct_.$(OBJEXT) jcmainct_.lo \
+jcmarker_.$(OBJEXT) jcmarker_.lo jcmaster_.$(OBJEXT) jcmaster_.lo \
+jcomapi_.$(OBJEXT) jcomapi_.lo jcparam_.$(OBJEXT) jcparam_.lo \
+jcprepct_.$(OBJEXT) jcprepct_.lo jcsample_.$(OBJEXT) jcsample_.lo \
+jctrans_.$(OBJEXT) jctrans_.lo jdapimin_.$(OBJEXT) jdapimin_.lo \
+jdapistd_.$(OBJEXT) jdapistd_.lo jdarith_.$(OBJEXT) jdarith_.lo \
+jdatadst_.$(OBJEXT) jdatadst_.lo jdatasrc_.$(OBJEXT) jdatasrc_.lo \
+jdcoefct_.$(OBJEXT) jdcoefct_.lo jdcolor_.$(OBJEXT) jdcolor_.lo \
+jddctmgr_.$(OBJEXT) jddctmgr_.lo jdhuff_.$(OBJEXT) jdhuff_.lo \
+jdinput_.$(OBJEXT) jdinput_.lo jdmainct_.$(OBJEXT) jdmainct_.lo \
+jdmarker_.$(OBJEXT) jdmarker_.lo jdmaster_.$(OBJEXT) jdmaster_.lo \
+jdmerge_.$(OBJEXT) jdmerge_.lo jdpostct_.$(OBJEXT) jdpostct_.lo \
+jdsample_.$(OBJEXT) jdsample_.lo jdtrans_.$(OBJEXT) jdtrans_.lo \
+jerror_.$(OBJEXT) jerror_.lo jfdctflt_.$(OBJEXT) jfdctflt_.lo \
+jfdctfst_.$(OBJEXT) jfdctfst_.lo jfdctint_.$(OBJEXT) jfdctint_.lo \
+jidctflt_.$(OBJEXT) jidctflt_.lo jidctfst_.$(OBJEXT) jidctfst_.lo \
+jidctint_.$(OBJEXT) jidctint_.lo jmemmgr_.$(OBJEXT) jmemmgr_.lo \
+jpegtran_.$(OBJEXT) jpegtran_.lo jquant1_.$(OBJEXT) jquant1_.lo \
+jquant2_.$(OBJEXT) jquant2_.lo jutils_.$(OBJEXT) jutils_.lo \
+rdbmp_.$(OBJEXT) rdbmp_.lo rdcolmap_.$(OBJEXT) rdcolmap_.lo \
+rdgif_.$(OBJEXT) rdgif_.lo rdjpgcom_.$(OBJEXT) rdjpgcom_.lo \
+rdppm_.$(OBJEXT) rdppm_.lo rdrle_.$(OBJEXT) rdrle_.lo \
+rdswitch_.$(OBJEXT) rdswitch_.lo rdtarga_.$(OBJEXT) rdtarga_.lo \
+transupp_.$(OBJEXT) transupp_.lo wrbmp_.$(OBJEXT) wrbmp_.lo \
+wrgif_.$(OBJEXT) wrgif_.lo wrjpgcom_.$(OBJEXT) wrjpgcom_.lo \
+wrppm_.$(OBJEXT) wrppm_.lo wrrle_.$(OBJEXT) wrrle_.lo \
+wrtarga_.$(OBJEXT) wrtarga_.lo : $(ANSI2KNR)
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-man1: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES) jconfig.cfg $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) jconfig.cfg $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES) jconfig.cfg $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS) jconfig.cfg $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-am
+all-am: Makefile $(ANSI2KNR) $(LTLIBRARIES) $(PROGRAMS) $(MANS) \
+		$(HEADERS) jconfig.h
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-krextra \
+	clean-libLTLIBRARIES clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-includeHEADERS install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic mostlyclean-kr \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-libLTLIBRARIES uninstall-local uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: all check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am check-local \
+	clean clean-binPROGRAMS clean-generic clean-krextra \
+	clean-libLTLIBRARIES clean-libtool ctags distclean \
+	distclean-compile distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags dvi dvi-am html html-am info \
+	info-am install install-am install-binPROGRAMS install-data \
+	install-data-am install-data-local install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-includeHEADERS install-info install-info-am \
+	install-libLTLIBRARIES install-man install-man1 install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-kr mostlyclean-libtool pdf \
+	pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-libLTLIBRARIES uninstall-local uninstall-man \
+	uninstall-man1
+
+
+# Install jconfig.h
+install-data-local:
+	$(mkinstalldirs) $(DESTDIR)$(includedir)
+	$(INSTALL_HEADER) jconfig.h $(DESTDIR)$(includedir)/jconfig.h
+
+# Uninstall jconfig.h
+uninstall-local:
+	rm -f $(DESTDIR)$(includedir)/jconfig.h
+
+# Run tests
+test: check-local
+check-local:
+	rm -f testout*
+	./djpeg -dct int -ppm -outfile testout.ppm  $(srcdir)/testorig.jpg
+	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  $(srcdir)/testorig.jpg
+	./cjpeg -dct int -outfile testout.jpg  $(srcdir)/testimg.ppm
+	./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg
+	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm
+	./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg
+	cmp $(srcdir)/testimg.ppm testout.ppm
+	cmp $(srcdir)/testimg.bmp testout.bmp
+	cmp $(srcdir)/testimg.jpg testout.jpg
+	cmp $(srcdir)/testimg.ppm testoutp.ppm
+	cmp $(srcdir)/testimgp.jpg testoutp.jpg
+	cmp $(srcdir)/testorig.jpg testoutt.jpg
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/jpeg-8d/README b/jpeg-8d/README
new file mode 100644
index 0000000..0a23c19
--- /dev/null
+++ b/jpeg-8d/README
@@ -0,0 +1,351 @@
+The Independent JPEG Group's JPEG software
+==========================================
+
+README for release 8d of 15-Jan-2012
+====================================
+
+This distribution contains the eighth public release of the Independent JPEG
+Group's free JPEG software.  You are welcome to redistribute this software and
+to use it for any purpose, subject to the conditions under LEGAL ISSUES, below.
+
+This software is the work of Tom Lane, Guido Vollbeding, Philip Gladstone,
+Bill Allombert, Jim Boucher, Lee Crocker, Bob Friesenhahn, Ben Jackson,
+Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Ge' Weijers,
+and other members of the Independent JPEG Group.
+
+IJG is not affiliated with the ISO/IEC JTC1/SC29/WG1 standards committee
+(also known as JPEG, together with ITU-T SG16).
+
+
+DOCUMENTATION ROADMAP
+=====================
+
+This file contains the following sections:
+
+OVERVIEW            General description of JPEG and the IJG software.
+LEGAL ISSUES        Copyright, lack of warranty, terms of distribution.
+REFERENCES          Where to learn more about JPEG.
+ARCHIVE LOCATIONS   Where to find newer versions of this software.
+ACKNOWLEDGMENTS     Special thanks.
+FILE FORMAT WARS    Software *not* to get.
+TO DO               Plans for future IJG releases.
+
+Other documentation files in the distribution are:
+
+User documentation:
+  install.txt       How to configure and install the IJG software.
+  usage.txt         Usage instructions for cjpeg, djpeg, jpegtran,
+                    rdjpgcom, and wrjpgcom.
+  *.1               Unix-style man pages for programs (same info as usage.txt).
+  wizard.txt        Advanced usage instructions for JPEG wizards only.
+  change.log        Version-to-version change highlights.
+Programmer and internal documentation:
+  libjpeg.txt       How to use the JPEG library in your own programs.
+  example.c         Sample code for calling the JPEG library.
+  structure.txt     Overview of the JPEG library's internal structure.
+  filelist.txt      Road map of IJG files.
+  coderules.txt     Coding style rules --- please read if you contribute code.
+
+Please read at least the files install.txt and usage.txt.  Some information
+can also be found in the JPEG FAQ (Frequently Asked Questions) article.  See
+ARCHIVE LOCATIONS below to find out where to obtain the FAQ article.
+
+If you want to understand how the JPEG code works, we suggest reading one or
+more of the REFERENCES, then looking at the documentation files (in roughly
+the order listed) before diving into the code.
+
+
+OVERVIEW
+========
+
+This package contains C software to implement JPEG image encoding, decoding,
+and transcoding.  JPEG (pronounced "jay-peg") is a standardized compression
+method for full-color and gray-scale images.
+
+This software implements JPEG baseline, extended-sequential, and progressive
+compression processes.  Provision is made for supporting all variants of these
+processes, although some uncommon parameter settings aren't implemented yet.
+We have made no provision for supporting the hierarchical or lossless
+processes defined in the standard.
+
+We provide a set of library routines for reading and writing JPEG image files,
+plus two sample applications "cjpeg" and "djpeg", which use the library to
+perform conversion between JPEG and some other popular image file formats.
+The library is intended to be reused in other applications.
+
+In order to support file conversion and viewing software, we have included
+considerable functionality beyond the bare JPEG coding/decoding capability;
+for example, the color quantization modules are not strictly part of JPEG
+decoding, but they are essential for output to colormapped file formats or
+colormapped displays.  These extra functions can be compiled out of the
+library if not required for a particular application.
+
+We have also included "jpegtran", a utility for lossless transcoding between
+different JPEG processes, and "rdjpgcom" and "wrjpgcom", two simple
+applications for inserting and extracting textual comments in JFIF files.
+
+The emphasis in designing this software has been on achieving portability and
+flexibility, while also making it fast enough to be useful.  In particular,
+the software is not intended to be read as a tutorial on JPEG.  (See the
+REFERENCES section for introductory material.)  Rather, it is intended to
+be reliable, portable, industrial-strength code.  We do not claim to have
+achieved that goal in every aspect of the software, but we strive for it.
+
+We welcome the use of this software as a component of commercial products.
+No royalty is required, but we do ask for an acknowledgement in product
+documentation, as described under LEGAL ISSUES.
+
+
+LEGAL ISSUES
+============
+
+In plain English:
+
+1. We don't promise that this software works.  (But if you find any bugs,
+   please let us know!)
+2. You can use this software for whatever you want.  You don't have to pay us.
+3. You may not pretend that you wrote this software.  If you use it in a
+   program, you must acknowledge somewhere in your documentation that
+   you've used the IJG code.
+
+In legalese:
+
+The authors make NO WARRANTY or representation, either express or implied,
+with respect to this software, its quality, accuracy, merchantability, or
+fitness for a particular purpose.  This software is provided "AS IS", and you,
+its user, assume the entire risk as to its quality and accuracy.
+
+This software is copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding.
+All Rights Reserved except as specified below.
+
+Permission is hereby granted to use, copy, modify, and distribute this
+software (or portions thereof) for any purpose, without fee, subject to these
+conditions:
+(1) If any part of the source code for this software is distributed, then this
+README file must be included, with this copyright and no-warranty notice
+unaltered; and any additions, deletions, or changes to the original files
+must be clearly indicated in accompanying documentation.
+(2) If only executable code is distributed, then the accompanying
+documentation must state that "this software is based in part on the work of
+the Independent JPEG Group".
+(3) Permission for use of this software is granted only if the user accepts
+full responsibility for any undesirable consequences; the authors accept
+NO LIABILITY for damages of any kind.
+
+These conditions apply to any software derived from or based on the IJG code,
+not just to the unmodified library.  If you use our work, you ought to
+acknowledge us.
+
+Permission is NOT granted for the use of any IJG author's name or company name
+in advertising or publicity relating to this software or products derived from
+it.  This software may be referred to only as "the Independent JPEG Group's
+software".
+
+We specifically permit and encourage the use of this software as the basis of
+commercial products, provided that all warranty or liability claims are
+assumed by the product vendor.
+
+
+ansi2knr.c is included in this distribution by permission of L. Peter Deutsch,
+sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA.
+ansi2knr.c is NOT covered by the above copyright and conditions, but instead
+by the usual distribution terms of the Free Software Foundation; principally,
+that you must include source code if you redistribute it.  (See the file
+ansi2knr.c for full details.)  However, since ansi2knr.c is not needed as part
+of any program generated from the IJG code, this does not limit you more than
+the foregoing paragraphs do.
+
+The Unix configuration script "configure" was produced with GNU Autoconf.
+It is copyright by the Free Software Foundation but is freely distributable.
+The same holds for its supporting scripts (config.guess, config.sub,
+ltmain.sh).  Another support script, install-sh, is copyright by X Consortium
+but is also freely distributable.
+
+The IJG distribution formerly included code to read and write GIF files.
+To avoid entanglement with the Unisys LZW patent, GIF reading support has
+been removed altogether, and the GIF writer has been simplified to produce
+"uncompressed GIFs".  This technique does not use the LZW algorithm; the
+resulting GIF files are larger than usual, but are readable by all standard
+GIF decoders.
+
+We are required to state that
+    "The Graphics Interchange Format(c) is the Copyright property of
+    CompuServe Incorporated.  GIF(sm) is a Service Mark property of
+    CompuServe Incorporated."
+
+
+REFERENCES
+==========
+
+We recommend reading one or more of these references before trying to
+understand the innards of the JPEG software.
+
+The best short technical introduction to the JPEG compression algorithm is
+	Wallace, Gregory K.  "The JPEG Still Picture Compression Standard",
+	Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.
+(Adjacent articles in that issue discuss MPEG motion picture compression,
+applications of JPEG, and related topics.)  If you don't have the CACM issue
+handy, a PostScript file containing a revised version of Wallace's article is
+available at http://www.ijg.org/files/wallace.ps.gz.  The file (actually
+a preprint for an article that appeared in IEEE Trans. Consumer Electronics)
+omits the sample images that appeared in CACM, but it includes corrections
+and some added material.  Note: the Wallace article is copyright ACM and IEEE,
+and it may not be used for commercial purposes.
+
+A somewhat less technical, more leisurely introduction to JPEG can be found in
+"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by
+M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1.  This book provides
+good explanations and example C code for a multitude of compression methods
+including JPEG.  It is an excellent source if you are comfortable reading C
+code but don't know much about data compression in general.  The book's JPEG
+sample code is far from industrial-strength, but when you are ready to look
+at a full implementation, you've got one here...
+
+The best currently available description of JPEG is the textbook "JPEG Still
+Image Data Compression Standard" by William B. Pennebaker and Joan L.
+Mitchell, published by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1.
+Price US$59.95, 638 pp.  The book includes the complete text of the ISO JPEG
+standards (DIS 10918-1 and draft DIS 10918-2).
+Although this is by far the most detailed and comprehensive exposition of
+JPEG publicly available, we point out that it is still missing an explanation
+of the most essential properties and algorithms of the underlying DCT
+technology.
+If you think that you know about DCT-based JPEG after reading this book,
+then you are in delusion.  The real fundamentals and corresponding potential
+of DCT-based JPEG are not publicly known so far, and that is the reason for
+all the mistaken developments taking place in the image coding domain.
+
+The original JPEG standard is divided into two parts, Part 1 being the actual
+specification, while Part 2 covers compliance testing methods.  Part 1 is
+titled "Digital Compression and Coding of Continuous-tone Still Images,
+Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS
+10918-1, ITU-T T.81.  Part 2 is titled "Digital Compression and Coding of
+Continuous-tone Still Images, Part 2: Compliance testing" and has document
+numbers ISO/IEC IS 10918-2, ITU-T T.83.
+IJG JPEG 8 introduces an implementation of the JPEG SmartScale extension
+which is specified in two documents:  A contributed document at ITU and ISO
+with title "ITU-T JPEG-Plus Proposal for Extending ITU-T T.81 for Advanced
+Image Coding", April 2006, Geneva, Switzerland.  The latest version of this
+document is Revision 3.  And a contributed document ISO/IEC JTC1/SC29/WG1 N
+5799 with title "Evolution of JPEG", June/July 2011, Berlin, Germany.
+
+The JPEG standard does not specify all details of an interchangeable file
+format.  For the omitted details we follow the "JFIF" conventions, revision
+1.02.  JFIF 1.02 has been adopted as an Ecma International Technical Report
+and thus received a formal publication status.  It is available as a free
+download in PDF format from
+http://www.ecma-international.org/publications/techreports/E-TR-098.htm.
+A PostScript version of the JFIF document is available at
+http://www.ijg.org/files/jfif.ps.gz.  There is also a plain text version at
+http://www.ijg.org/files/jfif.txt.gz, but it is missing the figures.
+
+The TIFF 6.0 file format specification can be obtained by FTP from
+ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz.  The JPEG incorporation scheme
+found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems.
+IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6).
+Instead, we recommend the JPEG design proposed by TIFF Technical Note #2
+(Compression tag 7).  Copies of this Note can be obtained from
+http://www.ijg.org/files/.  It is expected that the next revision
+of the TIFF spec will replace the 6.0 JPEG design with the Note's design.
+Although IJG's own code does not support TIFF/JPEG, the free libtiff library
+uses our library to implement TIFF/JPEG per the Note.
+
+
+ARCHIVE LOCATIONS
+=================
+
+The "official" archive site for this software is www.ijg.org.
+The most recent released version can always be found there in
+directory "files".  This particular version will be archived as
+http://www.ijg.org/files/jpegsrc.v8d.tar.gz, and in Windows-compatible
+"zip" archive format as http://www.ijg.org/files/jpegsr8d.zip.
+
+The JPEG FAQ (Frequently Asked Questions) article is a source of some
+general information about JPEG.
+It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/
+and other news.answers archive sites, including the official news.answers
+archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/.
+If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu
+with body
+	send usenet/news.answers/jpeg-faq/part1
+	send usenet/news.answers/jpeg-faq/part2
+
+
+ACKNOWLEDGMENTS
+===============
+
+Thank to Juergen Bruder for providing me with a copy of the common DCT
+algorithm article, only to find out that I had come to the same result
+in a more direct and comprehensible way with a more generative approach.
+
+Thank to Istvan Sebestyen and Joan L. Mitchell for inviting me to the
+ITU JPEG (Study Group 16) meeting in Geneva, Switzerland.
+
+Thank to Thomas Wiegand and Gary Sullivan for inviting me to the
+Joint Video Team (MPEG & ITU) meeting in Geneva, Switzerland.
+
+Thank to Thomas Richter and Daniel Lee for inviting me to the
+ISO/IEC JTC1/SC29/WG1 (also known as JPEG, together with ITU-T SG16)
+meeting in Berlin, Germany.
+
+Thank to John Korejwa and Massimo Ballerini for inviting me to
+fruitful consultations in Boston, MA and Milan, Italy.
+
+Thank to Hendrik Elstner, Roland Fassauer, Simone Zuck, Guenther
+Maier-Gerber, Walter Stoeber, Fred Schmitz, and Norbert Braunagel
+for corresponding business development.
+
+Thank to Nico Zschach and Dirk Stelling of the technical support team
+at the Digital Images company in Halle for providing me with extra
+equipment for configuration tests.
+
+Thank to Richard F. Lyon (then of Foveon Inc.) for fruitful
+communication about JPEG configuration in Sigma Photo Pro software.
+
+Thank to Andrew Finkenstadt for hosting the ijg.org site.
+
+Last but not least special thank to Thomas G. Lane for the original
+design and development of this singular software package.
+
+
+FILE FORMAT WARS
+================
+
+The ISO/IEC JTC1/SC29/WG1 standards committee (also known as JPEG, together
+with ITU-T SG16) currently promotes different formats containing the name
+"JPEG" which is misleading because these formats are incompatible with
+original DCT-based JPEG and are based on faulty technologies.
+IJG therefore does not and will not support such momentary mistakes
+(see REFERENCES).
+There exist also distributions under the name "OpenJPEG" promoting such
+kind of formats which is misleading because they don't support original
+JPEG images.
+We have no sympathy for the promotion of inferior formats.  Indeed, one of
+the original reasons for developing this free software was to help force
+convergence on common, interoperable format standards for JPEG files.
+Don't use an incompatible file format!
+(In any case, our decoder will remain capable of reading existing JPEG
+image files indefinitely.)
+
+Furthermore, the ISO committee pretends to be "responsible for the popular
+JPEG" in their public reports which is not true because they don't respond to
+actual requirements for the maintenance of the original JPEG specification.
+
+There are currently distributions in circulation containing the name
+"libjpeg" which claim to be a "derivative" or "fork" of the original
+libjpeg, but don't have the features and are incompatible with formats
+supported by actual IJG libjpeg distributions.  Furthermore, they
+violate the license conditions as described under LEGAL ISSUES above.
+We have no sympathy for the release of misleading and illegal
+distributions derived from obsolete code bases.
+Don't use an obsolete code base!
+
+
+TO DO
+=====
+
+Version 8 is the first release of a new generation JPEG standard
+to overcome the limitations of the original JPEG specification.
+More features are being prepared for coming releases...
+
+Please send bug reports, offers of help, etc. to jpeg-info@jpegclub.org.
diff --git a/jpeg-8d/aclocal.m4 b/jpeg-8d/aclocal.m4
new file mode 100644
index 0000000..9b38b97
--- /dev/null
+++ b/jpeg-8d/aclocal.m4
@@ -0,0 +1,9652 @@
+# generated automatically by aclocal 1.11.2 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
+# Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 57 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+       [m4_default([$3],
+		   [m4_fatal([Libtool version $1 or higher is required],
+		             63)])],
+       [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+  *\ * | *\	*)
+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    _LT_PATH_MAGIC
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+	[m4_ifval([$1], [$1], [$2])])
+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+    m4_ifval([$4],
+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+    lt_dict_add_subkey([lt_decl_dict], [$2],
+	[tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+  [0], [m4_fatal([$0: too few arguments: $#])],
+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+     m4_if([$2], [],
+	   m4_quote(lt_decl_varnames),
+	m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+					   [description])))[]dnl
+m4_pushdef([_libtool_name],
+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+    [0], [_libtool_name=[$]$1],
+    [1], [_libtool_name=$lt_[]$1],
+    [2], [_libtool_name=$lt_[]$1],
+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+	dnl If the libtool generation code has been placed in $CONFIG_LT,
+	dnl instead of duplicating it all over again into config.status,
+	dnl then we will have config.status run $CONFIG_LT later, so it
+	dnl needs to know what name is stored there:
+        [AC_CONFIG_COMMANDS([libtool],
+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+    dnl If the libtool generation code is destined for config.status,
+    dnl expand the accumulated commands and init code now:
+    [AC_CONFIG_COMMANDS([libtool],
+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable.  If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins.  After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script.  The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+  echo
+  AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+  -h, --help      print this help, then exit
+  -V, --version   print version number, then exit
+  -q, --quiet     do not print progress messages
+  -d, --debug     don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+  case $[1] in
+    --version | --v* | -V )
+      echo "$lt_cl_version"; exit 0 ;;
+    --help | --h* | -h )
+      echo "$lt_cl_help"; exit 0 ;;
+    --debug | --d* | -d )
+      debug=: ;;
+    --quiet | --q* | --silent | --s* | -q )
+      lt_cl_silent=: ;;
+
+    -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+    *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+  esac
+  shift
+done
+
+if $lt_cl_silent; then
+  exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test "$silent" = yes &&
+  lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+  m4_if(_LT_TAG, [C], [
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+  _LT_PROG_LTMAIN
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  _LT_PROG_REPLACE_SHELLFNS
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+  [C],			[_LT_LANG(C)],
+  [C++],		[_LT_LANG(CXX)],
+  [Go],			[_LT_LANG(GO)],
+  [Java],		[_LT_LANG(GCJ)],
+  [Fortran 77],		[_LT_LANG(F77)],
+  [Fortran],		[_LT_LANG(FC)],
+  [Windows Resource],	[_LT_LANG(RC)],
+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+    [_LT_LANG($1)],
+    [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+  [LT_SUPPORTED_TAG([$1])dnl
+  m4_append([_LT_TAGS], [$1 ])dnl
+  m4_define([_LT_LANG_]$1[_enabled], [])dnl
+  _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC],     [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+  fi
+fi
+if test -z "$GOC"; then
+  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+  [LT_LANG(CXX)],
+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+  [LT_LANG(F77)],
+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+  [LT_LANG(FC)],
+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+  [LT_LANG(GCJ)],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+    [LT_LANG(GCJ)],
+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+      [LT_LANG(GCJ)],
+      [m4_ifdef([AC_PROG_GCJ],
+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([A][M_PROG_GCJ],
+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([LT_PROG_GCJ],
+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+  [LT_LANG(GO)],
+  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+  [LT_LANG(RC)],
+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+    AC_CHECK_TOOL([LIPO], [lipo], [:])
+    AC_CHECK_TOOL([OTOOL], [otool], [:])
+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+    _LT_DECL([], [DSYMUTIL], [1],
+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+    _LT_DECL([], [NMEDIT], [1],
+      [Tool to change global to local symbols on Mac OS X])
+    _LT_DECL([], [LIPO], [1],
+      [Tool to manipulate fat objects and archives on Mac OS X])
+    _LT_DECL([], [OTOOL], [1],
+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+    _LT_DECL([], [OTOOL64], [1],
+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi])
+
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+	[lt_cv_ld_exported_symbols_list=yes],
+	[lt_cv_ld_exported_symbols_list=no])
+	LDFLAGS="$save_LDFLAGS"
+    ])
+
+    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+      [lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[012]])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_automatic, $1)=yes
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+  else
+    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  fi
+  _LT_TAGVAR(link_all_deplibs, $1)=yes
+  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    m4_if([$1], [CXX],
+[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
+],[])
+  else
+  _LT_TAGVAR(ld_shlibs, $1)=no
+  fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+  lt_aix_libpath_sed='[
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }]'
+  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi],[])
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+  fi
+  ])
+  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*" 
+}
+
+case "$ECHO" in
+  printf*) AC_MSG_RESULT([printf]) ;;
+  print*) AC_MSG_RESULT([print -r]) ;;
+  *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test "X`printf %s $ECHO`" = "X$ECHO" \
+      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[  --with-sysroot[=DIR] Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted.  We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   AC_MSG_RESULT([${with_sysroot}])
+   AC_MSG_ERROR([The sysroot must be an absolute path.])
+   ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+  [AS_HELP_STRING([--disable-libtool-lock],
+    [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_PUSH(C)
+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+  [lt_cv_ar_at_file=no
+   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+     [echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([lt_ar_try])
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	AC_TRY_EVAL([lt_ar_try])
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+     ])
+  ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+  [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+    [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+    [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+    [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       $2=yes
+     fi
+   fi
+   $RM conftest*
+])
+
+if test x"[$]$2" = xyes; then
+    m4_if([$5], , :, [$5])
+else
+    m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $3"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
+     else
+       $2=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+    m4_if([$4], , :, [$4])
+else
+    m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+  AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+    [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+  [$4]
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}]
+_LT_EOF
+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_dlunknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+    ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+	  [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+	      ])
+	    ])
+	  ])
+	])
+      ])
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+	 [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+	 [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+	 [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
+   fi
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+	[Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test "$hard_links" = no; then
+    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+         [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+  [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+    # Linking always hardcodes the temporary library directory.
+    _LT_TAGVAR(hardcode_action, $1)=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    _LT_TAGVAR(hardcode_action, $1)=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+    [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      AC_MSG_RESULT([yes])
+    else
+      AC_MSG_RESULT([no])
+    fi
+    ;;
+  *)
+    AC_MSG_RESULT([no])
+    ;;
+  esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+	[], [
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[[4-9]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[[45]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+m4_if([$1], [],[
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[23]].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[[3-9]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+    [lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+	 [lt_cv_shlibpath_overrides_runpath=yes])])
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+    ])
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[[89]] | openbsd2.[[89]].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+    [Variables whose values should be saved in libtool wrapper scripts and
+    restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+    [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+    [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+    [[List of archive names.  First name is the real one, the rest are links.
+    The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+    [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+    [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+    [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+    [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+    [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+    [[As "finish_cmds", except a single script fragment to be evaled but
+    not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+    [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+    [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+    [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="m4_if([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+  lt_cv_ld_reload_flag,
+  [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[[45]]*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[[3-9]]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+    [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+    [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+    [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi])
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+  AC_SUBST([DUMPBIN])
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+  [lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+  cat conftest.out >&AS_MESSAGE_LOG_FD
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+    [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+  [lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, cos, LIBM="-lm")
+  ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+  esac
+
+  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+	[Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK ['"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx]"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT@&t@_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT@&t@_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+    [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+    [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+    [lt_cv_sys_global_symbol_to_c_name_address], [1],
+    [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+    [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+    [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[[4-9]]*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	m4_if([$1], [GCJ], [],
+	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd*)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	;;
+    esac
+  fi
+],
+[
+  if test "$GCC" = yes; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+      if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+        *Intel*\ [[CF]]*Compiler*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	  ;;
+	*Portland\ Group*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    rdos*)
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    solaris*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    unicos*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
+    uts4*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *)
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+	[Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+	[Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  case $host_os in
+  aix[[4-9]]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    # Also, AIX nm treats weak defined symbols like other global defined
+    # symbols, whereas GNU nm marks them as "W".
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+    ;;
+  cygwin* | mingw* | cegcc*)
+    case $cc_basename in
+    cl*)
+      _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+      ;;
+    esac
+    ;;
+  *)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    ;;
+  esac
+], [
+  runpath_var=
+  _LT_TAGVAR(allow_undefined_flag, $1)=
+  _LT_TAGVAR(always_export_symbols, $1)=no
+  _LT_TAGVAR(archive_cmds, $1)=
+  _LT_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_TAGVAR(compiler_needs_object, $1)=no
+  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(hardcode_automatic, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(inherit_rpath, $1)=no
+  _LT_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_TAGVAR(module_cmds, $1)=
+  _LT_TAGVAR(module_expsym_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  _LT_TAGVAR(ld_shlibs, $1)=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[[3-9]]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=no
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    haiku*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    interix[[3-9]]*)
+      _LT_TAGVAR(hardcode_direct, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
+	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        _LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+
+    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+      runpath_var=
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
+
+    aix[[4-9]]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      _LT_TAGVAR(archive_cmds, $1)=''
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        _LT_SYS_MODULE_PATH_AIX([$1])
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 _LT_SYS_MODULE_PATH_AIX([$1])
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  fi
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[[45]]*)
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	_LT_TAGVAR(always_export_symbols, $1)=yes
+	_LT_TAGVAR(file_list_spec, $1)='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	# FIXME: Should let the user specify the lib program.
+	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+      _LT_DARWIN_LINKER_FEATURES($1)
+      ;;
+
+    dgux*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	m4_if($1, [], [
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  _LT_LINKER_OPTION([if $CC understands -b],
+	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	*)
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+	  [lt_cv_irix_exported_symbol],
+	  [save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   AC_LINK_IFELSE(
+	     [AC_LANG_SOURCE(
+	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+			      [C++], [[int foo (void) { return 0; }]],
+			      [Fortran 77], [[
+      subroutine foo
+      end]],
+			      [Fortran], [[
+      subroutine foo
+      end]])])],
+	      [lt_cv_irix_exported_symbol=yes],
+	      [lt_cv_irix_exported_symbol=no])
+           LDFLAGS="$save_LDFLAGS"])
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(inherit_rpath, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    newsos6)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     ;;
+	   *)
+	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    os2*)
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    solaris*)
+      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+        ;;
+	motorola)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4.3*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      _LT_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+    [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $_LT_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+	[$RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+	  _LT_TAGVAR(allow_undefined_flag, $1)=
+	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+	  then
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	  else
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  fi
+	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+	])
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+    [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+    [enable_shared_with_static_runtimes], [0],
+    [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+    [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+    [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+    [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+    [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+    [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+    [Commands used to build a loadable module if different from building
+    a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+    [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+    [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+    [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+    [Flag to hardcode $libdir into a binary during linking.
+    This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+    [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary and the resulting library dependency is
+    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+    library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+    [Set to "yes" if building a shared library automatically hardcodes DIR
+    into the library and all subsequent libraries and executables linked
+    against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+    [Set to yes if linker adds runtime paths of dependent libraries
+    to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+    [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+    [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+    [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+    [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+    [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+    [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+    [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+    [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl    [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_SYS_DYNAMIC_LINKER($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+  LT_SYS_DLOPEN_SELF
+  _LT_CMD_STRIPLIB
+
+  # Report which library types will actually be built
+  AC_MSG_CHECKING([if libtool supports shared libraries])
+  AC_MSG_RESULT([$can_build_shared])
+
+  AC_MSG_CHECKING([whether to build shared libraries])
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[[4-9]]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  AC_MSG_RESULT([$enable_shared])
+
+  AC_MSG_CHECKING([whether to build static libraries])
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  AC_MSG_RESULT([$enable_static])
+
+  _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+else
+  _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+    else
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+    fi
+
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
+
+      LT_PATH_LD
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+    _LT_TAGVAR(ld_shlibs, $1)=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      aix[[4-9]]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        _LT_TAGVAR(archive_cmds, $1)=''
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[[012]]|aix4.[[012]].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
+
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        _LT_TAGVAR(always_export_symbols, $1)=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          _LT_SYS_MODULE_PATH_AIX([$1])
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    _LT_SYS_MODULE_PATH_AIX([$1])
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	    if test "$with_gnu_ld" = yes; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    fi
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+	case $GXX,$cc_basename in
+	,cl* | no,cl*)
+	  # Native MSVC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=yes
+	  _LT_TAGVAR(file_list_spec, $1)='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=".dll"
+	  # FIXME: Setting linknames here is a bad hack.
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	    else
+	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	    fi~
+	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	    linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	  # Don't use ranlib
+	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+	    lt_tool_outputfile="@TOOL_OUTPUT@"~
+	    case $lt_outputfile in
+	      *.exe|*.EXE) ;;
+	      *)
+		lt_outputfile="$lt_outputfile.exe"
+		lt_tool_outputfile="$lt_tool_outputfile.exe"
+		;;
+	    esac~
+	    func_to_tool_file "$lt_outputfile"~
+	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	      $RM "$lt_outputfile.manifest";
+	    fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=no
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file (1st line
+	    # is EXPORTS), use it as is; otherwise, prepend...
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      cp $export_symbols $output_objdir/$soname.def;
+	    else
+	      echo EXPORTS > $output_objdir/$soname.def;
+	      cat $export_symbols >> $output_objdir/$soname.def;
+	    fi~
+	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	  ;;
+	esac
+	;;
+      darwin* | rhapsody*)
+        _LT_DARWIN_LINKER_FEATURES($1)
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      freebsd2.*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      freebsd-elf*)
+        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        ;;
+
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+        ;;
+
+      gnu*)
+        ;;
+
+      haiku*)
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        ;;
+
+      hpux9*)
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            _LT_TAGVAR(ld_shlibs, $1)=no
+            ;;
+          aCC*)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              _LT_TAGVAR(ld_shlibs, $1)=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            _LT_TAGVAR(hardcode_direct, $1)=no
+            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+            ;;
+          *)
+            _LT_TAGVAR(hardcode_direct, $1)=yes
+            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[[3-9]]*)
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	      fi
+	    fi
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    ;;
+        esac
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(inherit_rpath, $1)=yes
+        ;;
+
+      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+		$RANLIB $oldlib'
+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 and above use weak symbols
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    ;;
+	  xl* | mpixl* | bgxl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='func_echo_all'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+	;;
+
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=func_echo_all
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+		;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	    case $host_os in
+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+	    output_verbose_link_cmd='func_echo_all'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      fi
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+		*)
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+	_LT_TAGVAR(link_all_deplibs, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
+	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+	      '"$_LT_TAGVAR(reload_cmds, $1)"
+	    ;;
+	  *)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+
+    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+    _LT_TAGVAR(GCC, $1)="$GXX"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+  case ${2} in
+  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case ${prev}${p} in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test "$pre_test_object_deps_done" = no; then
+	 case ${prev} in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+	   _LT_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+	   _LT_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_TAGVAR(predep_objects,$1)=
+  _LT_TAGVAR(postdep_objects,$1)=
+  _LT_TAGVAR(postdeps,$1)=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC* | sunCC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+    [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+    [Dependencies to place before and after the objects being linked to
+    create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+    [The library search path used internally by the compiler when linking
+    a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${F77-"f77"}
+  CFLAGS=$FFLAGS
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+  GCC=$G77
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$G77"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+  CFLAGS="$lt_save_CFLAGS"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${FC-"f95"}
+  CFLAGS=$FCFLAGS
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+  :
+  _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+    [AC_CHECK_TOOL(GCJ, gcj,)
+      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+      AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([	 ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+])
+
+
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+  _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+    case ${1} in
+      */*) func_dirname_result="${1%/*}${2}" ;;
+      *  ) func_dirname_result="${3}" ;;
+    esac])
+
+  _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+    func_basename_result="${1##*/}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+    case ${1} in
+      */*) func_dirname_result="${1%/*}${2}" ;;
+      *  ) func_dirname_result="${3}" ;;
+    esac
+    func_basename_result="${1##*/}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary parameter first.
+    func_stripname_result=${3}
+    func_stripname_result=${func_stripname_result#"${1}"}
+    func_stripname_result=${func_stripname_result%"${2}"}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+    func_split_long_opt_name=${1%%=*}
+    func_split_long_opt_arg=${1#*=}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+    func_split_short_opt_arg=${1#??}
+    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+    case ${1} in
+      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+      *)    func_lo2o_result=${1} ;;
+    esac])
+
+  _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
+
+  _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
+
+  _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+    func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+    eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+         [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+         [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
+
+# Helper functions for option handling.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+#   Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 7 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+        _LT_MANGLE_DEFUN([$1], [$2]),
+    [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+		      [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME.  If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+    [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+  dnl
+  dnl Simply set some default values (i.e off) if boolean options were not
+  dnl specified:
+  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+  ])
+  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+  ])
+  dnl
+  dnl If no reference was made to various pairs of opposing options, then
+  dnl we run the default mode handler for the pair.  For example, if neither
+  dnl `shared' nor `disable-shared' was passed, we enable building of shared
+  dnl archives by default:
+  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+  		   [_LT_ENABLE_FAST_INSTALL])
+  ])
+])# _LT_SET_OPTIONS
+
+
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS],      [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+    _LT_DECL([build_libtool_libs], [enable_shared], [0],
+	[Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+    _LT_DECL([build_old_libs], [enable_static], [0],
+	[Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+	 [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+		 [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+		 [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+		 [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+		 [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+		 [m4_define([_LTDL_TYPE], [convenience])])
+
+# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+       [$#], [2], [[$2]],
+       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+       [$#], 1, [],
+       [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+	     [m4_foreach([_Lt_suffix],
+		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+		 [lt_append([$1], [$2], [$3])$4],
+		 [$5])],
+	  [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+	[$5],
+    [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+  [lt_join(m4_quote(m4_default([$4], [[, ]])),
+           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
+
+# ltversion.m4 -- version numbers			-*- Autoconf -*-
+#
+#   Copyright (C) 2004 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 3337 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.2])
+m4_define([LT_PACKAGE_REVISION], [1.3337])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.2'
+macro_revision='1.3337'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
+
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else.  This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
+# Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11.2], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.2])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009,
+# 2010, 2011 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation,
+# Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008,
+# 2011 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless `enable' is passed literally.
+# For symmetry, `disable' may be passed as well.  Anyway, the user
+# can override the default with the --enable/--disable switch.
+AC_DEFUN([AM_MAINTAINER_MODE],
+[m4_case(m4_default([$1], [disable]),
+       [enable], [m4_define([am_maintainer_other], [disable])],
+       [disable], [m4_define([am_maintainer_other], [enable])],
+       [m4_define([am_maintainer_other], [enable])
+        m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+  dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+  AC_ARG_ENABLE([maintainer-mode],
+[  --][am_maintainer_other][-maintainer-mode  am_maintainer_other make rules and dependencies not useful
+			  (and sometimes confusing) to the casual installer],
+      [USE_MAINTAINER_MODE=$enableval],
+      [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+  AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+  MAINT=$MAINTAINER_MODE_TRUE
+  AC_SUBST([MAINT])dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation,
+# Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software
+# Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1996, 1997, 1998, 2000, 2001, 2002, 2003, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+AC_DEFUN([AM_C_PROTOTYPES],
+[AC_REQUIRE([AC_C_PROTOTYPES])
+AC_DIAGNOSE([obsolete],
+            [$0: automatic de-ANSI-fication support is deprecated])
+if test "$ac_cv_prog_cc_stdc" != no; then
+  U= ANSI2KNR=
+else
+  U=_ ANSI2KNR=./ansi2knr
+fi
+# Ensure some checks needed by ansi2knr itself.
+AC_REQUIRE([AC_HEADER_STDC])
+AC_CHECK_HEADERS([string.h])
+AC_SUBST([U])dnl
+AC_SUBST([ANSI2KNR])dnl
+_AM_SUBST_NOTMAKE([ANSI2KNR])dnl
+])
+
+AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# (`yes' being less verbose, `no' or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules],
+[  --enable-silent-rules          less verbose build output (undo: `make V=1')
+  --disable-silent-rules         verbose build output (undo: `make V=0')])
+case $enable_silent_rules in
+yes) AM_DEFAULT_VERBOSITY=0;;
+no)  AM_DEFAULT_VERBOSITY=1;;
+*)   AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
diff --git a/jpeg-8d/ansi2knr.1 b/jpeg-8d/ansi2knr.1
new file mode 100644
index 0000000..f9ee5a6
--- /dev/null
+++ b/jpeg-8d/ansi2knr.1
@@ -0,0 +1,36 @@
+.TH ANSI2KNR 1 "19 Jan 1996"
+.SH NAME
+ansi2knr \- convert ANSI C to Kernighan & Ritchie C
+.SH SYNOPSIS
+.I ansi2knr
+[--varargs] input_file [output_file]
+.SH DESCRIPTION
+If no output_file is supplied, output goes to stdout.
+.br
+There are no error messages.
+.sp
+.I ansi2knr
+recognizes function definitions by seeing a non-keyword identifier at the left
+margin, followed by a left parenthesis, with a right parenthesis as the last
+character on the line, and with a left brace as the first token on the
+following line (ignoring possible intervening comments).  It will recognize a
+multi-line header provided that no intervening line ends with a left or right
+brace or a semicolon.  These algorithms ignore whitespace and comments, except
+that the function name must be the first thing on the line.
+.sp
+The following constructs will confuse it:
+.br
+     - Any other construct that starts at the left margin and follows the
+above syntax (such as a macro or function call).
+.br
+     - Some macros that tinker with the syntax of the function header.
+.sp
+The --varargs switch is obsolete, and is recognized only for
+backwards compatibility.  The present version of
+.I ansi2knr
+will always attempt to convert a ... argument to va_alist and va_dcl.
+.SH AUTHOR
+L. Peter Deutsch <ghost@aladdin.com> wrote the original ansi2knr and
+continues to maintain the current version; most of the code in the current
+version is his work.  ansi2knr also includes contributions by Francois
+Pinard <pinard@iro.umontreal.ca> and Jim Avera <jima@netcom.com>.
diff --git a/jpeg-8d/ansi2knr.c b/jpeg-8d/ansi2knr.c
new file mode 100644
index 0000000..e84c210
--- /dev/null
+++ b/jpeg-8d/ansi2knr.c
@@ -0,0 +1,739 @@
+/* Copyright (C) 1989, 2000 Aladdin Enterprises.  All rights reserved. */
+
+/*$Id: ansi2knr.c,v 1.14 2003/09/06 05:36:56 eggert Exp $*/
+/* Convert ANSI C function definitions to K&R ("traditional C") syntax */
+
+/*
+ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY.  No author or distributor accepts responsibility to anyone for the
+consequences of using it or for whether it serves any particular purpose or
+works at all, unless he says so in writing.  Refer to the GNU General Public
+License (the "GPL") for full details.
+
+Everyone is granted permission to copy, modify and redistribute ansi2knr,
+but only under the conditions described in the GPL.  A copy of this license
+is supposed to have been given to you along with ansi2knr so you can know
+your rights and responsibilities.  It should be in a file named COPYLEFT,
+or, if there is no file named COPYLEFT, a file named COPYING.  Among other
+things, the copyright notice and this notice must be preserved on all
+copies.
+
+We explicitly state here what we believe is already implied by the GPL: if
+the ansi2knr program is distributed as a separate set of sources and a
+separate executable file which are aggregated on a storage medium together
+with another program, this in itself does not bring the other program under
+the GPL, nor does the mere fact that such a program or the procedures for
+constructing it invoke the ansi2knr executable bring any other part of the
+program under the GPL.
+*/
+
+/*
+ * Usage:
+	ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]
+ * --filename provides the file name for the #line directive in the output,
+ * overriding input_file (if present).
+ * If no input_file is supplied, input is read from stdin.
+ * If no output_file is supplied, output goes to stdout.
+ * There are no error messages.
+ *
+ * ansi2knr recognizes function definitions by seeing a non-keyword
+ * identifier at the left margin, followed by a left parenthesis, with a
+ * right parenthesis as the last character on the line, and with a left
+ * brace as the first token on the following line (ignoring possible
+ * intervening comments and/or preprocessor directives), except that a line
+ * consisting of only
+ *	identifier1(identifier2)
+ * will not be considered a function definition unless identifier2 is
+ * the word "void", and a line consisting of
+ *	identifier1(identifier2, <<arbitrary>>)
+ * will not be considered a function definition.
+ * ansi2knr will recognize a multi-line header provided that no intervening
+ * line ends with a left or right brace or a semicolon.  These algorithms
+ * ignore whitespace, comments, and preprocessor directives, except that
+ * the function name must be the first thing on the line.  The following
+ * constructs will confuse it:
+ *	- Any other construct that starts at the left margin and
+ *	    follows the above syntax (such as a macro or function call).
+ *	- Some macros that tinker with the syntax of function headers.
+ */
+
+/*
+ * The original and principal author of ansi2knr is L. Peter Deutsch
+ * <ghost@aladdin.com>.  Other authors are noted in the change history
+ * that follows (in reverse chronological order):
+
+	lpd 2000-04-12 backs out Eggert's changes because of bugs:
+	- concatlits didn't declare the type of its bufend argument;
+	- concatlits didn't recognize when it was inside a comment;
+	- scanstring could scan backward past the beginning of the string; when
+	- the check for \ + newline in scanstring was unnecessary.
+
+	2000-03-05  Paul Eggert  <eggert@twinsun.com>
+
+	Add support for concatenated string literals.
+	* ansi2knr.c (concatlits): New decl.
+	(main): Invoke concatlits to concatenate string literals.
+	(scanstring): Handle backslash-newline correctly.  Work with
+	character constants.  Fix bug when scanning backwards through
+	backslash-quote.  Check for unterminated strings.
+	(convert1): Parse character constants, too.
+	(appendline, concatlits): New functions.
+	* ansi2knr.1: Document this.
+
+	lpd 1999-08-17 added code to allow preprocessor directives
+		wherever comments are allowed
+	lpd 1999-04-12 added minor fixes from Pavel Roskin
+		<pavel_roskin@geocities.com> for clean compilation with
+		gcc -W -Wall
+	lpd 1999-03-22 added hack to recognize lines consisting of
+		identifier1(identifier2, xxx) as *not* being procedures
+	lpd 1999-02-03 made indentation of preprocessor commands consistent
+	lpd 1999-01-28 fixed two bugs: a '/' in an argument list caused an
+		endless loop; quoted strings within an argument list
+		confused the parser
+	lpd 1999-01-24 added a check for write errors on the output,
+		suggested by Jim Meyering <meyering@ascend.com>
+	lpd 1998-11-09 added further hack to recognize identifier(void)
+		as being a procedure
+	lpd 1998-10-23 added hack to recognize lines consisting of
+		identifier1(identifier2) as *not* being procedures
+	lpd 1997-12-08 made input_file optional; only closes input and/or
+		output file if not stdin or stdout respectively; prints
+		usage message on stderr rather than stdout; adds
+		--filename switch (changes suggested by
+		<ceder@lysator.liu.se>)
+	lpd 1996-01-21 added code to cope with not HAVE_CONFIG_H and with
+		compilers that don't understand void, as suggested by
+		Tom Lane
+	lpd 1996-01-15 changed to require that the first non-comment token
+		on the line following a function header be a left brace,
+		to reduce sensitivity to macros, as suggested by Tom Lane
+		<tgl@sss.pgh.pa.us>
+	lpd 1995-06-22 removed #ifndefs whose sole purpose was to define
+		undefined preprocessor symbols as 0; changed all #ifdefs
+		for configuration symbols to #ifs
+	lpd 1995-04-05 changed copyright notice to make it clear that
+		including ansi2knr in a program does not bring the entire
+		program under the GPL
+	lpd 1994-12-18 added conditionals for systems where ctype macros
+		don't handle 8-bit characters properly, suggested by
+		Francois Pinard <pinard@iro.umontreal.ca>;
+		removed --varargs switch (this is now the default)
+	lpd 1994-10-10 removed CONFIG_BROKETS conditional
+	lpd 1994-07-16 added some conditionals to help GNU `configure',
+		suggested by Francois Pinard <pinard@iro.umontreal.ca>;
+		properly erase prototype args in function parameters,
+		contributed by Jim Avera <jima@netcom.com>;
+		correct error in writeblanks (it shouldn't erase EOLs)
+	lpd 1989-xx-xx original version
+ */
+
+/* Most of the conditionals here are to make ansi2knr work with */
+/* or without the GNU configure machinery. */
+
+#if HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stdio.h>
+#include <ctype.h>
+
+#if HAVE_CONFIG_H
+
+/*
+   For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h).
+   This will define HAVE_CONFIG_H and so, activate the following lines.
+ */
+
+# if STDC_HEADERS || HAVE_STRING_H
+#  include <string.h>
+# else
+#  include <strings.h>
+# endif
+
+#else /* not HAVE_CONFIG_H */
+
+/* Otherwise do it the hard way */
+
+# ifdef BSD
+#  include <strings.h>
+# else
+#  ifdef VMS
+    extern int strlen(), strncmp();
+#  else
+#   include <string.h>
+#  endif
+# endif
+
+#endif /* not HAVE_CONFIG_H */
+
+#if STDC_HEADERS
+# include <stdlib.h>
+#else
+/*
+   malloc and free should be declared in stdlib.h,
+   but if you've got a K&R compiler, they probably aren't.
+ */
+# ifdef MSDOS
+#  include <malloc.h>
+# else
+#  ifdef VMS
+     extern char *malloc();
+     extern void free();
+#  else
+     extern char *malloc();
+     extern int free();
+#  endif
+# endif
+
+#endif
+
+/* Define NULL (for *very* old compilers). */
+#ifndef NULL
+# define NULL (0)
+#endif
+
+/*
+ * The ctype macros don't always handle 8-bit characters correctly.
+ * Compensate for this here.
+ */
+#ifdef isascii
+# undef HAVE_ISASCII		/* just in case */
+# define HAVE_ISASCII 1
+#else
+#endif
+#if STDC_HEADERS || !HAVE_ISASCII
+# define is_ascii(c) 1
+#else
+# define is_ascii(c) isascii(c)
+#endif
+
+#define is_space(c) (is_ascii(c) && isspace(c))
+#define is_alpha(c) (is_ascii(c) && isalpha(c))
+#define is_alnum(c) (is_ascii(c) && isalnum(c))
+
+/* Scanning macros */
+#define isidchar(ch) (is_alnum(ch) || (ch) == '_')
+#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_')
+
+/* Forward references */
+char *ppdirforward();
+char *ppdirbackward();
+char *skipspace();
+char *scanstring();
+int writeblanks();
+int test1();
+int convert1();
+
+/* The main program */
+int
+main(argc, argv)
+    int argc;
+    char *argv[];
+{	FILE *in = stdin;
+	FILE *out = stdout;
+	char *filename = 0;
+	char *program_name = argv[0];
+	char *output_name = 0;
+#define bufsize 5000			/* arbitrary size */
+	char *buf;
+	char *line;
+	char *more;
+	char *usage =
+	  "Usage: ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]\n";
+	/*
+	 * In previous versions, ansi2knr recognized a --varargs switch.
+	 * If this switch was supplied, ansi2knr would attempt to convert
+	 * a ... argument to va_alist and va_dcl; if this switch was not
+	 * supplied, ansi2knr would simply drop any such arguments.
+	 * Now, ansi2knr always does this conversion, and we only
+	 * check for this switch for backward compatibility.
+	 */
+	int convert_varargs = 1;
+	int output_error;
+
+	while ( argc > 1 && argv[1][0] == '-' ) {
+	  if ( !strcmp(argv[1], "--varargs") ) {
+	    convert_varargs = 1;
+	    argc--;
+	    argv++;
+	    continue;
+	  }
+	  if ( !strcmp(argv[1], "--filename") && argc > 2 ) {
+	    filename = argv[2];
+	    argc -= 2;
+	    argv += 2;
+	    continue;
+	  }
+	  fprintf(stderr, "%s: Unrecognized switch: %s\n", program_name,
+		  argv[1]);
+	  fprintf(stderr, usage);
+	  exit(1);
+	}
+	switch ( argc )
+	   {
+	default:
+		fprintf(stderr, usage);
+		exit(0);
+	case 3:
+		output_name = argv[2];
+		out = fopen(output_name, "w");
+		if ( out == NULL ) {
+		  fprintf(stderr, "%s: Cannot open output file %s\n",
+			  program_name, output_name);
+		  exit(1);
+		}
+		/* falls through */
+	case 2:
+		in = fopen(argv[1], "r");
+		if ( in == NULL ) {
+		  fprintf(stderr, "%s: Cannot open input file %s\n",
+			  program_name, argv[1]);
+		  exit(1);
+		}
+		if ( filename == 0 )
+		  filename = argv[1];
+		/* falls through */
+	case 1:
+		break;
+	   }
+	if ( filename )
+	  fprintf(out, "#line 1 \"%s\"\n", filename);
+	buf = malloc(bufsize);
+	if ( buf == NULL )
+	   {
+		fprintf(stderr, "Unable to allocate read buffer!\n");
+		exit(1);
+	   }
+	line = buf;
+	while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL )
+	   {
+test:		line += strlen(line);
+		switch ( test1(buf) )
+		   {
+		case 2:			/* a function header */
+			convert1(buf, out, 1, convert_varargs);
+			break;
+		case 1:			/* a function */
+			/* Check for a { at the start of the next line. */
+			more = ++line;
+f:			if ( line >= buf + (bufsize - 1) ) /* overflow check */
+			  goto wl;
+			if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL )
+			  goto wl;
+			switch ( *skipspace(ppdirforward(more), 1) )
+			  {
+			  case '{':
+			    /* Definitely a function header. */
+			    convert1(buf, out, 0, convert_varargs);
+			    fputs(more, out);
+			    break;
+			  case 0:
+			    /* The next line was blank or a comment: */
+			    /* keep scanning for a non-comment. */
+			    line += strlen(line);
+			    goto f;
+			  default:
+			    /* buf isn't a function header, but */
+			    /* more might be. */
+			    fputs(buf, out);
+			    strcpy(buf, more);
+			    line = buf;
+			    goto test;
+			  }
+			break;
+		case -1:		/* maybe the start of a function */
+			if ( line != buf + (bufsize - 1) ) /* overflow check */
+			  continue;
+			/* falls through */
+		default:		/* not a function */
+wl:			fputs(buf, out);
+			break;
+		   }
+		line = buf;
+	   }
+	if ( line != buf )
+	  fputs(buf, out);
+	free(buf);
+	if ( output_name ) {
+	  output_error = ferror(out);
+	  output_error |= fclose(out);
+	} else {		/* out == stdout */
+	  fflush(out);
+	  output_error = ferror(out);
+	}
+	if ( output_error ) {
+	  fprintf(stderr, "%s: error writing to %s\n", program_name,
+		  (output_name ? output_name : "stdout"));
+	  exit(1);
+	}
+	if ( in != stdin )
+	  fclose(in);
+	return 0;
+}
+
+/*
+ * Skip forward or backward over one or more preprocessor directives.
+ */
+char *
+ppdirforward(p)
+    char *p;
+{
+    for (; *p == '#'; ++p) {
+	for (; *p != '\r' && *p != '\n'; ++p)
+	    if (*p == 0)
+		return p;
+	if (*p == '\r' && p[1] == '\n')
+	    ++p;
+    }
+    return p;
+}
+char *
+ppdirbackward(p, limit)
+    char *p;
+    char *limit;
+{
+    char *np = p;
+
+    for (;; p = --np) {
+	if (*np == '\n' && np[-1] == '\r')
+	    --np;
+	for (; np > limit && np[-1] != '\r' && np[-1] != '\n'; --np)
+	    if (np[-1] == 0)
+		return np;
+	if (*np != '#')
+	    return p;
+    }
+}
+
+/*
+ * Skip over whitespace, comments, and preprocessor directives,
+ * in either direction.
+ */
+char *
+skipspace(p, dir)
+    char *p;
+    int dir;			/* 1 for forward, -1 for backward */
+{
+    for ( ; ; ) {
+	while ( is_space(*p) )
+	    p += dir;
+	if ( !(*p == '/' && p[dir] == '*') )
+	    break;
+	p += dir;  p += dir;
+	while ( !(*p == '*' && p[dir] == '/') ) {
+	    if ( *p == 0 )
+		return p;	/* multi-line comment?? */
+	    p += dir;
+	}
+	p += dir;  p += dir;
+    }
+    return p;
+}
+
+/* Scan over a quoted string, in either direction. */
+char *
+scanstring(p, dir)
+    char *p;
+    int dir;
+{
+    for (p += dir; ; p += dir)
+	if (*p == '"' && p[-dir] != '\\')
+	    return p + dir;
+}
+
+/*
+ * Write blanks over part of a string.
+ * Don't overwrite end-of-line characters.
+ */
+int
+writeblanks(start, end)
+    char *start;
+    char *end;
+{	char *p;
+	for ( p = start; p < end; p++ )
+	  if ( *p != '\r' && *p != '\n' )
+	    *p = ' ';
+	return 0;
+}
+
+/*
+ * Test whether the string in buf is a function definition.
+ * The string may contain and/or end with a newline.
+ * Return as follows:
+ *	0 - definitely not a function definition;
+ *	1 - definitely a function definition;
+ *	2 - definitely a function prototype (NOT USED);
+ *	-1 - may be the beginning of a function definition,
+ *		append another line and look again.
+ * The reason we don't attempt to convert function prototypes is that
+ * Ghostscript's declaration-generating macros look too much like
+ * prototypes, and confuse the algorithms.
+ */
+int
+test1(buf)
+    char *buf;
+{	char *p = buf;
+	char *bend;
+	char *endfn;
+	int contin;
+
+	if ( !isidfirstchar(*p) )
+	  return 0;		/* no name at left margin */
+	bend = skipspace(ppdirbackward(buf + strlen(buf) - 1, buf), -1);
+	switch ( *bend )
+	   {
+	   case ';': contin = 0 /*2*/; break;
+	   case ')': contin = 1; break;
+	   case '{': return 0;		/* not a function */
+	   case '}': return 0;		/* not a function */
+	   default: contin = -1;
+	   }
+	while ( isidchar(*p) )
+	  p++;
+	endfn = p;
+	p = skipspace(p, 1);
+	if ( *p++ != '(' )
+	  return 0;		/* not a function */
+	p = skipspace(p, 1);
+	if ( *p == ')' )
+	  return 0;		/* no parameters */
+	/* Check that the apparent function name isn't a keyword. */
+	/* We only need to check for keywords that could be followed */
+	/* by a left parenthesis (which, unfortunately, is most of them). */
+	   {	static char *words[] =
+		   {	"asm", "auto", "case", "char", "const", "double",
+			"extern", "float", "for", "if", "int", "long",
+			"register", "return", "short", "signed", "sizeof",
+			"static", "switch", "typedef", "unsigned",
+			"void", "volatile", "while", 0
+		   };
+		char **key = words;
+		char *kp;
+		unsigned len = endfn - buf;
+
+		while ( (kp = *key) != 0 )
+		   {	if ( strlen(kp) == len && !strncmp(kp, buf, len) )
+			  return 0;	/* name is a keyword */
+			key++;
+		   }
+	   }
+	   {
+	       char *id = p;
+	       int len;
+	       /*
+		* Check for identifier1(identifier2) and not
+		* identifier1(void), or identifier1(identifier2, xxxx).
+		*/
+
+	       while ( isidchar(*p) )
+		   p++;
+	       len = p - id;
+	       p = skipspace(p, 1);
+	       if (*p == ',' ||
+		   (*p == ')' && (len != 4 || strncmp(id, "void", 4)))
+		   )
+		   return 0;	/* not a function */
+	   }
+	/*
+	 * If the last significant character was a ), we need to count
+	 * parentheses, because it might be part of a formal parameter
+	 * that is a procedure.
+	 */
+	if (contin > 0) {
+	    int level = 0;
+
+	    for (p = skipspace(buf, 1); *p; p = skipspace(p + 1, 1))
+		level += (*p == '(' ? 1 : *p == ')' ? -1 : 0);
+	    if (level > 0)
+		contin = -1;
+	}
+	return contin;
+}
+
+/* Convert a recognized function definition or header to K&R syntax. */
+int
+convert1(buf, out, header, convert_varargs)
+    char *buf;
+    FILE *out;
+    int header;			/* Boolean */
+    int convert_varargs;	/* Boolean */
+{	char *endfn;
+	char *p;
+	/*
+	 * The breaks table contains pointers to the beginning and end
+	 * of each argument.
+	 */
+	char **breaks;
+	unsigned num_breaks = 2;	/* for testing */
+	char **btop;
+	char **bp;
+	char **ap;
+	char *vararg = 0;
+
+	/* Pre-ANSI implementations don't agree on whether strchr */
+	/* is called strchr or index, so we open-code it here. */
+	for ( endfn = buf; *(endfn++) != '('; )
+	  ;
+top:	p = endfn;
+	breaks = (char **)malloc(sizeof(char *) * num_breaks * 2);
+	if ( breaks == NULL )
+	   {	/* Couldn't allocate break table, give up */
+		fprintf(stderr, "Unable to allocate break table!\n");
+		fputs(buf, out);
+		return -1;
+	   }
+	btop = breaks + num_breaks * 2 - 2;
+	bp = breaks;
+	/* Parse the argument list */
+	do
+	   {	int level = 0;
+		char *lp = NULL;
+		char *rp = NULL;
+		char *end = NULL;
+
+		if ( bp >= btop )
+		   {	/* Filled up break table. */
+			/* Allocate a bigger one and start over. */
+			free((char *)breaks);
+			num_breaks <<= 1;
+			goto top;
+		   }
+		*bp++ = p;
+		/* Find the end of the argument */
+		for ( ; end == NULL; p++ )
+		   {	switch(*p)
+			   {
+			   case ',':
+				if ( !level ) end = p;
+				break;
+			   case '(':
+				if ( !level ) lp = p;
+				level++;
+				break;
+			   case ')':
+				if ( --level < 0 ) end = p;
+				else rp = p;
+				break;
+			   case '/':
+				if (p[1] == '*')
+				    p = skipspace(p, 1) - 1;
+				break;
+			   case '"':
+			       p = scanstring(p, 1) - 1;
+			       break;
+			   default:
+				;
+			   }
+		   }
+		/* Erase any embedded prototype parameters. */
+		if ( lp && rp )
+		  writeblanks(lp + 1, rp);
+		p--;			/* back up over terminator */
+		/* Find the name being declared. */
+		/* This is complicated because of procedure and */
+		/* array modifiers. */
+		for ( ; ; )
+		   {	p = skipspace(p - 1, -1);
+			switch ( *p )
+			   {
+			   case ']':	/* skip array dimension(s) */
+			   case ')':	/* skip procedure args OR name */
+			   {	int level = 1;
+				while ( level )
+				 switch ( *--p )
+				   {
+				   case ']': case ')':
+				       level++;
+				       break;
+				   case '[': case '(':
+				       level--;
+				       break;
+				   case '/':
+				       if (p > buf && p[-1] == '*')
+					   p = skipspace(p, -1) + 1;
+				       break;
+				   case '"':
+				       p = scanstring(p, -1) + 1;
+				       break;
+				   default: ;
+				   }
+			   }
+				if ( *p == '(' && *skipspace(p + 1, 1) == '*' )
+				   {	/* We found the name being declared */
+					while ( !isidfirstchar(*p) )
+					  p = skipspace(p, 1) + 1;
+					goto found;
+				   }
+				break;
+			   default:
+				goto found;
+			   }
+		   }
+found:		if ( *p == '.' && p[-1] == '.' && p[-2] == '.' )
+		  {	if ( convert_varargs )
+			  {	*bp++ = "va_alist";
+				vararg = p-2;
+			  }
+			else
+			  {	p++;
+				if ( bp == breaks + 1 )	/* sole argument */
+				  writeblanks(breaks[0], p);
+				else
+				  writeblanks(bp[-1] - 1, p);
+				bp--;
+			  }
+		   }
+		else
+		   {	while ( isidchar(*p) ) p--;
+			*bp++ = p+1;
+		   }
+		p = end;
+	   }
+	while ( *p++ == ',' );
+	*bp = p;
+	/* Make a special check for 'void' arglist */
+	if ( bp == breaks+2 )
+	   {	p = skipspace(breaks[0], 1);
+		if ( !strncmp(p, "void", 4) )
+		   {	p = skipspace(p+4, 1);
+			if ( p == breaks[2] - 1 )
+			   {	bp = breaks;	/* yup, pretend arglist is empty */
+				writeblanks(breaks[0], p + 1);
+			   }
+		   }
+	   }
+	/* Put out the function name and left parenthesis. */
+	p = buf;
+	while ( p != endfn ) putc(*p, out), p++;
+	/* Put out the declaration. */
+	if ( header )
+	  {	fputs(");", out);
+		for ( p = breaks[0]; *p; p++ )
+		  if ( *p == '\r' || *p == '\n' )
+		    putc(*p, out);
+	  }
+	else
+	  {	for ( ap = breaks+1; ap < bp; ap += 2 )
+		  {	p = *ap;
+			while ( isidchar(*p) )
+			  putc(*p, out), p++;
+			if ( ap < bp - 1 )
+			  fputs(", ", out);
+		  }
+		fputs(")  ", out);
+		/* Put out the argument declarations */
+		for ( ap = breaks+2; ap <= bp; ap += 2 )
+		  (*ap)[-1] = ';';
+		if ( vararg != 0 )
+		  {	*vararg = 0;
+			fputs(breaks[0], out);		/* any prior args */
+			fputs("va_dcl", out);		/* the final arg */
+			fputs(bp[0], out);
+		  }
+		else
+		  fputs(breaks[0], out);
+	  }
+	free((char *)breaks);
+	return 0;
+}
diff --git a/jpeg-8d/cderror.h b/jpeg-8d/cderror.h
new file mode 100644
index 0000000..e19c475
--- /dev/null
+++ b/jpeg-8d/cderror.h
@@ -0,0 +1,134 @@
+/*
+ * cderror.h
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file defines the error and message codes for the cjpeg/djpeg
+ * applications.  These strings are not needed as part of the JPEG library
+ * proper.
+ * Edit this file to add new codes, or to translate the message strings to
+ * some other language.
+ */
+
+/*
+ * To define the enum list of message codes, include this file without
+ * defining macro JMESSAGE.  To create a message string table, include it
+ * again with a suitable JMESSAGE definition (see jerror.c for an example).
+ */
+#ifndef JMESSAGE
+#ifndef CDERROR_H
+#define CDERROR_H
+/* First time through, define the enum list */
+#define JMAKE_ENUM_LIST
+#else
+/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */
+#define JMESSAGE(code,string)
+#endif /* CDERROR_H */
+#endif /* JMESSAGE */
+
+#ifdef JMAKE_ENUM_LIST
+
+typedef enum {
+
+#define JMESSAGE(code,string)	code ,
+
+#endif /* JMAKE_ENUM_LIST */
+
+JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */
+
+#ifdef BMP_SUPPORTED
+JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format")
+JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported")
+JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length")
+JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1")
+JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB")
+JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported")
+JMESSAGE(JERR_BMP_EMPTY, "Empty BMP image")
+JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM")
+JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image")
+JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image")
+JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image")
+JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image")
+#endif /* BMP_SUPPORTED */
+
+#ifdef GIF_SUPPORTED
+JMESSAGE(JERR_GIF_BUG, "GIF output got confused")
+JMESSAGE(JERR_GIF_CODESIZE, "Bogus GIF codesize %d")
+JMESSAGE(JERR_GIF_COLORSPACE, "GIF output must be grayscale or RGB")
+JMESSAGE(JERR_GIF_IMAGENOTFOUND, "Too few images in GIF file")
+JMESSAGE(JERR_GIF_NOT, "Not a GIF file")
+JMESSAGE(JTRC_GIF, "%ux%ux%d GIF image")
+JMESSAGE(JTRC_GIF_BADVERSION,
+	 "Warning: unexpected GIF version number '%c%c%c'")
+JMESSAGE(JTRC_GIF_EXTENSION, "Ignoring GIF extension block of type 0x%02x")
+JMESSAGE(JTRC_GIF_NONSQUARE, "Caution: nonsquare pixels in input")
+JMESSAGE(JWRN_GIF_BADDATA, "Corrupt data in GIF file")
+JMESSAGE(JWRN_GIF_CHAR, "Bogus char 0x%02x in GIF file, ignoring")
+JMESSAGE(JWRN_GIF_ENDCODE, "Premature end of GIF image")
+JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits")
+#endif /* GIF_SUPPORTED */
+
+#ifdef PPM_SUPPORTED
+JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB")
+JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file")
+JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file")
+JMESSAGE(JTRC_PGM, "%ux%u PGM image")
+JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image")
+JMESSAGE(JTRC_PPM, "%ux%u PPM image")
+JMESSAGE(JTRC_PPM_TEXT, "%ux%u text PPM image")
+#endif /* PPM_SUPPORTED */
+
+#ifdef RLE_SUPPORTED
+JMESSAGE(JERR_RLE_BADERROR, "Bogus error code from RLE library")
+JMESSAGE(JERR_RLE_COLORSPACE, "RLE output must be grayscale or RGB")
+JMESSAGE(JERR_RLE_DIMENSIONS, "Image dimensions (%ux%u) too large for RLE")
+JMESSAGE(JERR_RLE_EMPTY, "Empty RLE file")
+JMESSAGE(JERR_RLE_EOF, "Premature EOF in RLE header")
+JMESSAGE(JERR_RLE_MEM, "Insufficient memory for RLE header")
+JMESSAGE(JERR_RLE_NOT, "Not an RLE file")
+JMESSAGE(JERR_RLE_TOOMANYCHANNELS, "Cannot handle %d output channels for RLE")
+JMESSAGE(JERR_RLE_UNSUPPORTED, "Cannot handle this RLE setup")
+JMESSAGE(JTRC_RLE, "%ux%u full-color RLE file")
+JMESSAGE(JTRC_RLE_FULLMAP, "%ux%u full-color RLE file with map of length %d")
+JMESSAGE(JTRC_RLE_GRAY, "%ux%u grayscale RLE file")
+JMESSAGE(JTRC_RLE_MAPGRAY, "%ux%u grayscale RLE file with map of length %d")
+JMESSAGE(JTRC_RLE_MAPPED, "%ux%u colormapped RLE file with map of length %d")
+#endif /* RLE_SUPPORTED */
+
+#ifdef TARGA_SUPPORTED
+JMESSAGE(JERR_TGA_BADCMAP, "Unsupported Targa colormap format")
+JMESSAGE(JERR_TGA_BADPARMS, "Invalid or unsupported Targa file")
+JMESSAGE(JERR_TGA_COLORSPACE, "Targa output must be grayscale or RGB")
+JMESSAGE(JTRC_TGA, "%ux%u RGB Targa image")
+JMESSAGE(JTRC_TGA_GRAY, "%ux%u grayscale Targa image")
+JMESSAGE(JTRC_TGA_MAPPED, "%ux%u colormapped Targa image")
+#else
+JMESSAGE(JERR_TGA_NOTCOMP, "Targa support was not compiled")
+#endif /* TARGA_SUPPORTED */
+
+JMESSAGE(JERR_BAD_CMAP_FILE,
+	 "Color map file is invalid or of unsupported format")
+JMESSAGE(JERR_TOO_MANY_COLORS,
+	 "Output file format cannot handle %d colormap entries")
+JMESSAGE(JERR_UNGETC_FAILED, "ungetc failed")
+#ifdef TARGA_SUPPORTED
+JMESSAGE(JERR_UNKNOWN_FORMAT,
+	 "Unrecognized input file format --- perhaps you need -targa")
+#else
+JMESSAGE(JERR_UNKNOWN_FORMAT, "Unrecognized input file format")
+#endif
+JMESSAGE(JERR_UNSUPPORTED_FORMAT, "Unsupported output file format")
+
+#ifdef JMAKE_ENUM_LIST
+
+  JMSG_LASTADDONCODE
+} ADDON_MESSAGE_CODE;
+
+#undef JMAKE_ENUM_LIST
+#endif /* JMAKE_ENUM_LIST */
+
+/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */
+#undef JMESSAGE
diff --git a/jpeg-8d/cdjpeg.c b/jpeg-8d/cdjpeg.c
new file mode 100644
index 0000000..b6250ff
--- /dev/null
+++ b/jpeg-8d/cdjpeg.c
@@ -0,0 +1,181 @@
+/*
+ * cdjpeg.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains common support routines used by the IJG application
+ * programs (cjpeg, djpeg, jpegtran).
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include <ctype.h>		/* to declare isupper(), tolower() */
+#ifdef NEED_SIGNAL_CATCHER
+#include <signal.h>		/* to declare signal() */
+#endif
+#ifdef USE_SETMODE
+#include <fcntl.h>		/* to declare setmode()'s parameter macros */
+/* If you have setmode() but not <io.h>, just delete this line: */
+#include <io.h>			/* to declare setmode() */
+#endif
+
+
+/*
+ * Signal catcher to ensure that temporary files are removed before aborting.
+ * NB: for Amiga Manx C this is actually a global routine named _abort();
+ * we put "#define signal_catcher _abort" in jconfig.h.  Talk about bogus...
+ */
+
+#ifdef NEED_SIGNAL_CATCHER
+
+static j_common_ptr sig_cinfo;
+
+void				/* must be global for Manx C */
+signal_catcher (int signum)
+{
+  if (sig_cinfo != NULL) {
+    if (sig_cinfo->err != NULL) /* turn off trace output */
+      sig_cinfo->err->trace_level = 0;
+    jpeg_destroy(sig_cinfo);	/* clean up memory allocation & temp files */
+  }
+  exit(EXIT_FAILURE);
+}
+
+
+GLOBAL(void)
+enable_signal_catcher (j_common_ptr cinfo)
+{
+  sig_cinfo = cinfo;
+#ifdef SIGINT			/* not all systems have SIGINT */
+  signal(SIGINT, signal_catcher);
+#endif
+#ifdef SIGTERM			/* not all systems have SIGTERM */
+  signal(SIGTERM, signal_catcher);
+#endif
+}
+
+#endif
+
+
+/*
+ * Optional progress monitor: display a percent-done figure on stderr.
+ */
+
+#ifdef PROGRESS_REPORT
+
+METHODDEF(void)
+progress_monitor (j_common_ptr cinfo)
+{
+  cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress;
+  int total_passes = prog->pub.total_passes + prog->total_extra_passes;
+  int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit);
+
+  if (percent_done != prog->percent_done) {
+    prog->percent_done = percent_done;
+    if (total_passes > 1) {
+      fprintf(stderr, "\rPass %d/%d: %3d%% ",
+	      prog->pub.completed_passes + prog->completed_extra_passes + 1,
+	      total_passes, percent_done);
+    } else {
+      fprintf(stderr, "\r %3d%% ", percent_done);
+    }
+    fflush(stderr);
+  }
+}
+
+
+GLOBAL(void)
+start_progress_monitor (j_common_ptr cinfo, cd_progress_ptr progress)
+{
+  /* Enable progress display, unless trace output is on */
+  if (cinfo->err->trace_level == 0) {
+    progress->pub.progress_monitor = progress_monitor;
+    progress->completed_extra_passes = 0;
+    progress->total_extra_passes = 0;
+    progress->percent_done = -1;
+    cinfo->progress = &progress->pub;
+  }
+}
+
+
+GLOBAL(void)
+end_progress_monitor (j_common_ptr cinfo)
+{
+  /* Clear away progress display */
+  if (cinfo->err->trace_level == 0) {
+    fprintf(stderr, "\r                \r");
+    fflush(stderr);
+  }
+}
+
+#endif
+
+
+/*
+ * Case-insensitive matching of possibly-abbreviated keyword switches.
+ * keyword is the constant keyword (must be lower case already),
+ * minchars is length of minimum legal abbreviation.
+ */
+
+GLOBAL(boolean)
+keymatch (char * arg, const char * keyword, int minchars)
+{
+  register int ca, ck;
+  register int nmatched = 0;
+
+  while ((ca = *arg++) != '\0') {
+    if ((ck = *keyword++) == '\0')
+      return FALSE;		/* arg longer than keyword, no good */
+    if (isupper(ca))		/* force arg to lcase (assume ck is already) */
+      ca = tolower(ca);
+    if (ca != ck)
+      return FALSE;		/* no good */
+    nmatched++;			/* count matched characters */
+  }
+  /* reached end of argument; fail if it's too short for unique abbrev */
+  if (nmatched < minchars)
+    return FALSE;
+  return TRUE;			/* A-OK */
+}
+
+
+/*
+ * Routines to establish binary I/O mode for stdin and stdout.
+ * Non-Unix systems often require some hacking to get out of text mode.
+ */
+
+GLOBAL(FILE *)
+read_stdin (void)
+{
+  FILE * input_file = stdin;
+
+#ifdef USE_SETMODE		/* need to hack file mode? */
+  setmode(fileno(stdin), O_BINARY);
+#endif
+#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
+  if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
+    fprintf(stderr, "Cannot reopen stdin\n");
+    exit(EXIT_FAILURE);
+  }
+#endif
+  return input_file;
+}
+
+
+GLOBAL(FILE *)
+write_stdout (void)
+{
+  FILE * output_file = stdout;
+
+#ifdef USE_SETMODE		/* need to hack file mode? */
+  setmode(fileno(stdout), O_BINARY);
+#endif
+#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
+  if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) {
+    fprintf(stderr, "Cannot reopen stdout\n");
+    exit(EXIT_FAILURE);
+  }
+#endif
+  return output_file;
+}
diff --git a/jpeg-8d/cdjpeg.h b/jpeg-8d/cdjpeg.h
new file mode 100644
index 0000000..ed024ac
--- /dev/null
+++ b/jpeg-8d/cdjpeg.h
@@ -0,0 +1,187 @@
+/*
+ * cdjpeg.h
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains common declarations for the sample applications
+ * cjpeg and djpeg.  It is NOT used by the core JPEG library.
+ */
+
+#define JPEG_CJPEG_DJPEG	/* define proper options in jconfig.h */
+#define JPEG_INTERNAL_OPTIONS	/* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jerror.h"		/* get library error codes too */
+#include "cderror.h"		/* get application-specific error codes */
+
+
+/*
+ * Object interface for cjpeg's source file decoding modules
+ */
+
+typedef struct cjpeg_source_struct * cjpeg_source_ptr;
+
+struct cjpeg_source_struct {
+  JMETHOD(void, start_input, (j_compress_ptr cinfo,
+			      cjpeg_source_ptr sinfo));
+  JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo,
+				       cjpeg_source_ptr sinfo));
+  JMETHOD(void, finish_input, (j_compress_ptr cinfo,
+			       cjpeg_source_ptr sinfo));
+
+  FILE *input_file;
+
+  JSAMPARRAY buffer;
+  JDIMENSION buffer_height;
+};
+
+
+/*
+ * Object interface for djpeg's output file encoding modules
+ */
+
+typedef struct djpeg_dest_struct * djpeg_dest_ptr;
+
+struct djpeg_dest_struct {
+  /* start_output is called after jpeg_start_decompress finishes.
+   * The color map will be ready at this time, if one is needed.
+   */
+  JMETHOD(void, start_output, (j_decompress_ptr cinfo,
+			       djpeg_dest_ptr dinfo));
+  /* Emit the specified number of pixel rows from the buffer. */
+  JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo,
+				 djpeg_dest_ptr dinfo,
+				 JDIMENSION rows_supplied));
+  /* Finish up at the end of the image. */
+  JMETHOD(void, finish_output, (j_decompress_ptr cinfo,
+				djpeg_dest_ptr dinfo));
+
+  /* Target file spec; filled in by djpeg.c after object is created. */
+  FILE * output_file;
+
+  /* Output pixel-row buffer.  Created by module init or start_output.
+   * Width is cinfo->output_width * cinfo->output_components;
+   * height is buffer_height.
+   */
+  JSAMPARRAY buffer;
+  JDIMENSION buffer_height;
+};
+
+
+/*
+ * cjpeg/djpeg may need to perform extra passes to convert to or from
+ * the source/destination file format.  The JPEG library does not know
+ * about these passes, but we'd like them to be counted by the progress
+ * monitor.  We use an expanded progress monitor object to hold the
+ * additional pass count.
+ */
+
+struct cdjpeg_progress_mgr {
+  struct jpeg_progress_mgr pub;	/* fields known to JPEG library */
+  int completed_extra_passes;	/* extra passes completed */
+  int total_extra_passes;	/* total extra */
+  /* last printed percentage stored here to avoid multiple printouts */
+  int percent_done;
+};
+
+typedef struct cdjpeg_progress_mgr * cd_progress_ptr;
+
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jinit_read_bmp		jIRdBMP
+#define jinit_write_bmp		jIWrBMP
+#define jinit_read_gif		jIRdGIF
+#define jinit_write_gif		jIWrGIF
+#define jinit_read_ppm		jIRdPPM
+#define jinit_write_ppm		jIWrPPM
+#define jinit_read_rle		jIRdRLE
+#define jinit_write_rle		jIWrRLE
+#define jinit_read_targa	jIRdTarga
+#define jinit_write_targa	jIWrTarga
+#define read_quant_tables	RdQTables
+#define read_scan_script	RdScnScript
+#define set_quality_ratings     SetQRates
+#define set_quant_slots		SetQSlots
+#define set_sample_factors	SetSFacts
+#define read_color_map		RdCMap
+#define enable_signal_catcher	EnSigCatcher
+#define start_progress_monitor	StProgMon
+#define end_progress_monitor	EnProgMon
+#define read_stdin		RdStdin
+#define write_stdout		WrStdout
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+/* Module selection routines for I/O modules. */
+
+EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo,
+					    boolean is_os2));
+EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo));
+EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo));
+EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo));
+EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo));
+
+/* cjpeg support routines (in rdswitch.c) */
+
+EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename,
+				       boolean force_baseline));
+EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename));
+EXTERN(boolean) set_quality_ratings JPP((j_compress_ptr cinfo, char *arg,
+					 boolean force_baseline));
+EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg));
+EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg));
+
+/* djpeg support routines (in rdcolmap.c) */
+
+EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile));
+
+/* common support routines (in cdjpeg.c) */
+
+EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo));
+EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo,
+					 cd_progress_ptr progress));
+EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo));
+EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars));
+EXTERN(FILE *) read_stdin JPP((void));
+EXTERN(FILE *) write_stdout JPP((void));
+
+/* miscellaneous useful macros */
+
+#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
+#define READ_BINARY	"r"
+#define WRITE_BINARY	"w"
+#else
+#ifdef VMS			/* VMS is very nonstandard */
+#define READ_BINARY	"rb", "ctx=stm"
+#define WRITE_BINARY	"wb", "ctx=stm"
+#else				/* standard ANSI-compliant case */
+#define READ_BINARY	"rb"
+#define WRITE_BINARY	"wb"
+#endif
+#endif
+
+#ifndef EXIT_FAILURE		/* define exit() codes if not provided */
+#define EXIT_FAILURE  1
+#endif
+#ifndef EXIT_SUCCESS
+#ifdef VMS
+#define EXIT_SUCCESS  1		/* VMS is very nonstandard */
+#else
+#define EXIT_SUCCESS  0
+#endif
+#endif
+#ifndef EXIT_WARNING
+#ifdef VMS
+#define EXIT_WARNING  1		/* VMS is very nonstandard */
+#else
+#define EXIT_WARNING  2
+#endif
+#endif
diff --git a/jpeg-8d/change.log b/jpeg-8d/change.log
new file mode 100644
index 0000000..729bca6
--- /dev/null
+++ b/jpeg-8d/change.log
@@ -0,0 +1,346 @@
+CHANGE LOG for Independent JPEG Group's JPEG software
+
+
+Version 8d  15-Jan-2012
+-----------------------
+
+Add cjpeg -rgb option to create RGB JPEG files.
+Using this switch suppresses the conversion from RGB
+colorspace input to the default YCbCr JPEG colorspace.
+This feature allows true lossless JPEG coding of RGB color images.
+The recommended command for this purpose is currently
+cjpeg -rgb -block 1 -arithmetic.
+SmartScale capable decoder (introduced with IJG JPEG 8) required.
+Thank to Michael Koch for the initial suggestion.
+
+Add option to disable the region adjustment in the transupp crop code.
+Thank to Jeffrey Friedl for the suggestion.
+
+Thank to Richard Jones and Edd Dawson for various minor corrections.
+
+Thank to Akim Demaille for configure.ac cleanup.
+
+
+Version 8c  16-Jan-2011
+-----------------------
+
+Add option to compression library and cjpeg (-block N) to use
+different DCT block size.
+All N from 1 to 16 are possible.  Default is 8 (baseline format).
+Larger values produce higher compression,
+smaller values produce higher quality.
+SmartScale capable decoder (introduced with IJG JPEG 8) required.
+
+
+Version 8b  16-May-2010
+-----------------------
+
+Repair problem in new memory source manager with corrupt JPEG data.
+Thank to Ted Campbell and Samuel Chun for the report.
+
+Repair problem in Makefile.am test target.
+Thank to anonymous user for the report.
+
+Support MinGW installation with automatic configure.
+Thank to Volker Grabsch for the suggestion.
+
+
+Version 8a  28-Feb-2010
+-----------------------
+
+Writing tables-only datastreams via jpeg_write_tables works again.
+
+Support 32-bit BMPs (RGB image with Alpha channel) for read in cjpeg.
+Thank to Brett Blackham for the suggestion.
+
+Improve accuracy in floating point IDCT calculation.
+Thank to Robert Hooke for the hint.
+
+
+Version 8  10-Jan-2010
+----------------------
+
+jpegtran now supports the same -scale option as djpeg for "lossless" resize.
+An implementation of the JPEG SmartScale extension is required for this
+feature.  A (draft) specification of the JPEG SmartScale extension is
+available as a contributed document at ITU and ISO.  Revision 2 or later
+of the document is required (latest document version is Revision 3).
+The SmartScale extension will enable more features beside lossless resize
+in future implementations, as described in the document (new compression
+options).
+
+Add sanity check in BMP reader module to avoid cjpeg crash for empty input
+image (thank to Isaev Ildar of ISP RAS, Moscow, RU for reporting this error).
+
+Add data source and destination managers for read from and write to
+memory buffers.  New API functions jpeg_mem_src and jpeg_mem_dest.
+Thank to Roberto Boni from Italy for the suggestion.
+
+
+Version 7  27-Jun-2009
+----------------------
+
+New scaled DCTs implemented.
+djpeg now supports scalings N/8 with all N from 1 to 16.
+cjpeg now supports scalings 8/N with all N from 1 to 16.
+Scaled DCTs with size larger than 8 are now also used for resolving the
+common 2x2 chroma subsampling case without additional spatial resampling.
+Separate spatial resampling for those kind of files is now only necessary
+for N>8 scaling cases.
+Furthermore, separate scaled DCT functions are provided for direct resolving
+of the common asymmetric subsampling cases (2x1 and 1x2) without additional
+spatial resampling.
+
+cjpeg -quality option has been extended for support of separate quality
+settings for luminance and chrominance (or in general, for every provided
+quantization table slot).
+New API function jpeg_default_qtables() and q_scale_factor array in library.
+
+Added -nosmooth option to cjpeg, complementary to djpeg.
+New variable "do_fancy_downsampling" in library, complement to fancy
+upsampling.  Fancy upsampling now uses direct DCT scaling with sizes
+larger than 8.  The old method is not reversible and has been removed.
+
+Support arithmetic entropy encoding and decoding.
+Added files jaricom.c, jcarith.c, jdarith.c.
+
+Straighten the file structure:
+Removed files jidctred.c, jcphuff.c, jchuff.h, jdphuff.c, jdhuff.h.
+
+jpegtran has a new "lossless" cropping feature.
+
+Implement -perfect option in jpegtran, new API function
+jtransform_perfect_transform() in transupp. (DP 204_perfect.dpatch)
+
+Better error messages for jpegtran fopen failure.
+(DP 203_jpegtran_errmsg.dpatch)
+
+Fix byte order issue with 16bit PPM/PGM files in rdppm.c/wrppm.c:
+according to Netpbm, the de facto standard implementation of the PNM formats,
+the most significant byte is first. (DP 203_rdppm.dpatch)
+
+Add -raw option to rdjpgcom not to mangle the output.
+(DP 205_rdjpgcom_raw.dpatch)
+
+Make rdjpgcom locale aware. (DP 201_rdjpgcom_locale.dpatch)
+
+Add extern "C" to jpeglib.h.
+This avoids the need to put extern "C" { ... } around #include "jpeglib.h"
+in your C++ application.  Defining the symbol DONT_USE_EXTERN_C in the
+configuration prevents this. (DP 202_jpeglib.h_c++.dpatch)
+
+
+Version 6b  27-Mar-1998
+-----------------------
+
+jpegtran has new features for lossless image transformations (rotation
+and flipping) as well as "lossless" reduction to grayscale.
+
+jpegtran now copies comments by default; it has a -copy switch to enable
+copying all APPn blocks as well, or to suppress comments.  (Formerly it
+always suppressed comments and APPn blocks.)  jpegtran now also preserves
+JFIF version and resolution information.
+
+New decompressor library feature: COM and APPn markers found in the input
+file can be saved in memory for later use by the application.  (Before,
+you had to code this up yourself with a custom marker processor.)
+
+There is an unused field "void * client_data" now in compress and decompress
+parameter structs; this may be useful in some applications.
+
+JFIF version number information is now saved by the decoder and accepted by
+the encoder.  jpegtran uses this to copy the source file's version number,
+to ensure "jpegtran -copy all" won't create bogus files that contain JFXX
+extensions but claim to be version 1.01.  Applications that generate their
+own JFXX extension markers also (finally) have a supported way to cause the
+encoder to emit JFIF version number 1.02.
+
+djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather
+than as unknown APP0 markers.
+
+In -verbose mode, djpeg and rdjpgcom will try to print the contents of
+APP12 markers as text.  Some digital cameras store useful text information
+in APP12 markers.
+
+Handling of truncated data streams is more robust: blocks beyond the one in
+which the error occurs will be output as uniform gray, or left unchanged
+if decoding a progressive JPEG.  The appearance no longer depends on the
+Huffman tables being used.
+
+Huffman tables are checked for validity much more carefully than before.
+
+To avoid the Unisys LZW patent, djpeg's GIF output capability has been
+changed to produce "uncompressed GIFs", and cjpeg's GIF input capability
+has been removed altogether.  We're not happy about it either, but there
+seems to be no good alternative.
+
+The configure script now supports building libjpeg as a shared library
+on many flavors of Unix (all the ones that GNU libtool knows how to
+build shared libraries for).  Use "./configure --enable-shared" to
+try this out.
+
+New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio.
+Also, a jconfig file and a build script for Metrowerks CodeWarrior
+on Apple Macintosh.  makefile.dj has been updated for DJGPP v2, and there
+are miscellaneous other minor improvements in the makefiles.
+
+jmemmac.c now knows how to create temporary files following Mac System 7
+conventions.
+
+djpeg's -map switch is now able to read raw-format PPM files reliably.
+
+cjpeg -progressive -restart no longer generates any unnecessary DRI markers.
+
+Multiple calls to jpeg_simple_progression for a single JPEG object
+no longer leak memory.
+
+
+Version 6a  7-Feb-96
+--------------------
+
+Library initialization sequence modified to detect version mismatches
+and struct field packing mismatches between library and calling application.
+This change requires applications to be recompiled, but does not require
+any application source code change.
+
+All routine declarations changed to the style "GLOBAL(type) name ...",
+that is, GLOBAL, LOCAL, METHODDEF, EXTERN are now macros taking the
+routine's return type as an argument.  This makes it possible to add
+Microsoft-style linkage keywords to all the routines by changing just
+these macros.  Note that any application code that was using these macros
+will have to be changed.
+
+DCT coefficient quantization tables are now stored in normal array order
+rather than zigzag order.  Application code that calls jpeg_add_quant_table,
+or otherwise manipulates quantization tables directly, will need to be
+changed.  If you need to make such code work with either older or newer
+versions of the library, a test like "#if JPEG_LIB_VERSION >= 61" is
+recommended.
+
+djpeg's trace capability now dumps DQT tables in natural order, not zigzag
+order.  This allows the trace output to be made into a "-qtables" file
+more easily.
+
+New system-dependent memory manager module for use on Apple Macintosh.
+
+Fix bug in cjpeg's -smooth option: last one or two scanlines would be
+duplicates of the prior line unless the image height mod 16 was 1 or 2.
+
+Repair minor problems in VMS, BCC, MC6 makefiles.
+
+New configure script based on latest GNU Autoconf.
+
+Correct the list of include files needed by MetroWerks C for ccommand().
+
+Numerous small documentation updates.
+
+
+Version 6  2-Aug-95
+-------------------
+
+Progressive JPEG support: library can read and write full progressive JPEG
+files.  A "buffered image" mode supports incremental decoding for on-the-fly
+display of progressive images.  Simply recompiling an existing IJG-v5-based
+decoder with v6 should allow it to read progressive files, though of course
+without any special progressive display.
+
+New "jpegtran" application performs lossless transcoding between different
+JPEG formats; primarily, it can be used to convert baseline to progressive
+JPEG and vice versa.  In support of jpegtran, the library now allows lossless
+reading and writing of JPEG files as DCT coefficient arrays.  This ability
+may be of use in other applications.
+
+Notes for programmers:
+* We changed jpeg_start_decompress() to be able to suspend; this makes all
+decoding modes available to suspending-input applications.  However,
+existing applications that use suspending input will need to be changed
+to check the return value from jpeg_start_decompress().  You don't need to
+do anything if you don't use a suspending data source.
+* We changed the interface to the virtual array routines: access_virt_array
+routines now take a count of the number of rows to access this time.  The
+last parameter to request_virt_array routines is now interpreted as the
+maximum number of rows that may be accessed at once, but not necessarily
+the height of every access.
+
+
+Version 5b  15-Mar-95
+---------------------
+
+Correct bugs with grayscale images having v_samp_factor > 1.
+
+jpeg_write_raw_data() now supports output suspension.
+
+Correct bugs in "configure" script for case of compiling in
+a directory other than the one containing the source files.
+
+Repair bug in jquant1.c: sometimes didn't use as many colors as it could.
+
+Borland C makefile and jconfig file work under either MS-DOS or OS/2.
+
+Miscellaneous improvements to documentation.
+
+
+Version 5a  7-Dec-94
+--------------------
+
+Changed color conversion roundoff behavior so that grayscale values are
+represented exactly.  (This causes test image files to change.)
+
+Make ordered dither use 16x16 instead of 4x4 pattern for a small quality
+improvement.
+
+New configure script based on latest GNU Autoconf.
+Fix configure script to handle CFLAGS correctly.
+Rename *.auto files to *.cfg, so that configure script still works if
+file names have been truncated for DOS.
+
+Fix bug in rdbmp.c: didn't allow for extra data between header and image.
+
+Modify rdppm.c/wrppm.c to handle 2-byte raw PPM/PGM formats for 12-bit data.
+
+Fix several bugs in rdrle.c.
+
+NEED_SHORT_EXTERNAL_NAMES option was broken.
+
+Revise jerror.h/jerror.c for more flexibility in message table.
+
+Repair oversight in jmemname.c NO_MKTEMP case: file could be there
+but unreadable.
+
+
+Version 5  24-Sep-94
+--------------------
+
+Version 5 represents a nearly complete redesign and rewrite of the IJG
+software.  Major user-visible changes include:
+  * Automatic configuration simplifies installation for most Unix systems.
+  * A range of speed vs. image quality tradeoffs are supported.
+    This includes resizing of an image during decompression: scaling down
+    by a factor of 1/2, 1/4, or 1/8 is handled very efficiently.
+  * New programs rdjpgcom and wrjpgcom allow insertion and extraction
+    of text comments in a JPEG file.
+
+The application programmer's interface to the library has changed completely.
+Notable improvements include:
+  * We have eliminated the use of callback routines for handling the
+    uncompressed image data.  The application now sees the library as a
+    set of routines that it calls to read or write image data on a
+    scanline-by-scanline basis.
+  * The application image data is represented in a conventional interleaved-
+    pixel format, rather than as a separate array for each color channel.
+    This can save a copying step in many programs.
+  * The handling of compressed data has been cleaned up: the application can
+    supply routines to source or sink the compressed data.  It is possible to
+    suspend processing on source/sink buffer overrun, although this is not
+    supported in all operating modes.
+  * All static state has been eliminated from the library, so that multiple
+    instances of compression or decompression can be active concurrently.
+  * JPEG abbreviated datastream formats are supported, ie, quantization and
+    Huffman tables can be stored separately from the image data.
+  * And not only that, but the documentation of the library has improved
+    considerably!
+
+
+The last widely used release before the version 5 rewrite was version 4A of
+18-Feb-93.  Change logs before that point have been discarded, since they
+are not of much interest after the rewrite.
diff --git a/jpeg-8d/cjpeg.1 b/jpeg-8d/cjpeg.1
new file mode 100644
index 0000000..c10f971
--- /dev/null
+++ b/jpeg-8d/cjpeg.1
@@ -0,0 +1,348 @@
+.TH CJPEG 1 "28 August 2011"
+.SH NAME
+cjpeg \- compress an image file to a JPEG file
+.SH SYNOPSIS
+.B cjpeg
+[
+.I options
+]
+[
+.I filename
+]
+.LP
+.SH DESCRIPTION
+.LP
+.B cjpeg
+compresses the named image file, or the standard input if no file is
+named, and produces a JPEG/JFIF file on the standard output.
+The currently supported input file formats are: PPM (PBMPLUS color
+format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster
+Toolkit format).  (RLE is supported only if the URT library is available.)
+.SH OPTIONS
+All switch names may be abbreviated; for example,
+.B \-grayscale
+may be written
+.B \-gray
+or
+.BR \-gr .
+Most of the "basic" switches can be abbreviated to as little as one letter.
+Upper and lower case are equivalent (thus
+.B \-BMP
+is the same as
+.BR \-bmp ).
+British spellings are also accepted (e.g.,
+.BR \-greyscale ),
+though for brevity these are not mentioned below.
+.PP
+The basic switches are:
+.TP
+.BI \-quality " N[,...]"
+Scale quantization tables to adjust image quality.  Quality is 0 (worst) to
+100 (best); default is 75.  (See below for more info.)
+.TP
+.B \-grayscale
+Create monochrome JPEG file from color input.  Be sure to use this switch when
+compressing a grayscale BMP file, because
+.B cjpeg
+isn't bright enough to notice whether a BMP file uses only shades of gray.
+By saying
+.BR \-grayscale ,
+you'll get a smaller JPEG file that takes less time to process.
+.TP
+.B \-rgb
+Create RGB JPEG file.
+Using this switch suppresses the conversion from RGB
+colorspace input to the default YCbCr JPEG colorspace.
+Use this switch in combination with the
+.BI \-block " N"
+switch (see below) for lossless JPEG coding.
+.TP
+.B \-optimize
+Perform optimization of entropy encoding parameters.  Without this, default
+encoding parameters are used.
+.B \-optimize
+usually makes the JPEG file a little smaller, but
+.B cjpeg
+runs somewhat slower and needs much more memory.  Image quality and speed of
+decompression are unaffected by
+.BR \-optimize .
+.TP
+.B \-progressive
+Create progressive JPEG file (see below).
+.TP
+.BI \-scale " M/N"
+Scale the output image by a factor M/N.  Currently supported scale factors are
+M/N with all N from 1 to 16, where M is the destination DCT size, which is 8
+by default (see
+.BI \-block " N"
+switch below).
+.TP
+.B \-targa
+Input file is Targa format.  Targa files that contain an "identification"
+field will not be automatically recognized by
+.BR cjpeg ;
+for such files you must specify
+.B \-targa
+to make
+.B cjpeg
+treat the input as Targa format.
+For most Targa files, you won't need this switch.
+.PP
+The
+.B \-quality
+switch lets you trade off compressed file size against quality of the
+reconstructed image: the higher the quality setting, the larger the JPEG file,
+and the closer the output image will be to the original input.  Normally you
+want to use the lowest quality setting (smallest file) that decompresses into
+something visually indistinguishable from the original image.  For this
+purpose the quality setting should be between 50 and 95; the default of 75 is
+often about right.  If you see defects at
+.B \-quality
+75, then go up 5 or 10 counts at a time until you are happy with the output
+image.  (The optimal setting will vary from one image to another.)
+.PP
+.B \-quality
+100 will generate a quantization table of all 1's, minimizing loss in the
+quantization step (but there is still information loss in subsampling, as well
+as roundoff error).  This setting is mainly of interest for experimental
+purposes.  Quality values above about 95 are
+.B not
+recommended for normal use; the compressed file size goes up dramatically for
+hardly any gain in output image quality.
+.PP
+In the other direction, quality values below 50 will produce very small files
+of low image quality.  Settings around 5 to 10 might be useful in preparing an
+index of a large image library, for example.  Try
+.B \-quality
+2 (or so) for some amusing Cubist effects.  (Note: quality
+values below about 25 generate 2-byte quantization tables, which are
+considered optional in the JPEG standard.
+.B cjpeg
+emits a warning message when you give such a quality value, because some
+other JPEG programs may be unable to decode the resulting file.  Use
+.B \-baseline
+if you need to ensure compatibility at low quality values.)
+.PP
+The
+.B \-quality
+option has been extended in IJG version 7 for support of separate quality
+settings for luminance and chrominance (or in general, for every provided
+quantization table slot).  This feature is useful for high-quality
+applications which cannot accept the damage of color data by coarse
+subsampling settings.  You can now easily reduce the color data amount more
+smoothly with finer control without separate subsampling.  The resulting file
+is fully compliant with standard JPEG decoders.
+Note that the
+.B \-quality
+ratings refer to the quantization table slots, and that the last value is
+replicated if there are more q-table slots than parameters.  The default
+q-table slots are 0 for luminance and 1 for chrominance with default tables as
+given in the JPEG standard.  This is compatible with the old behaviour in case
+that only one parameter is given, which is then used for both luminance and
+chrominance (slots 0 and 1).  More or custom quantization tables can be set
+with
+.B \-qtables
+and assigned to components with
+.B \-qslots
+parameter (see the "wizard" switches below).
+.B Caution:
+You must explicitly add
+.BI \-sample " 1x1"
+for efficient separate color
+quality selection, since the default value used by library is 2x2!
+.PP
+The
+.B \-progressive
+switch creates a "progressive JPEG" file.  In this type of JPEG file, the data
+is stored in multiple scans of increasing quality.  If the file is being
+transmitted over a slow communications link, the decoder can use the first
+scan to display a low-quality image very quickly, and can then improve the
+display with each subsequent scan.  The final image is exactly equivalent to a
+standard JPEG file of the same quality setting, and the total file size is
+about the same --- often a little smaller.
+.PP
+Switches for advanced users:
+.TP
+.B \-arithmetic
+Use arithmetic coding.
+.B Caution:
+arithmetic coded JPEG is not yet widely implemented, so many decoders will be
+unable to view an arithmetic coded JPEG file at all.
+.TP
+.BI \-block " N"
+Set DCT block size.  All N from 1 to 16 are possible.
+Default is 8 (baseline format).
+Larger values produce higher compression,
+smaller values produce higher quality
+(exact DCT stage possible with 1 or 2; with the default quality of 75 and
+default Luminance qtable the DCT+Quantization stage is lossless for N=1).
+.B Caution:
+An implementation of the JPEG SmartScale extension is required for this
+feature.  SmartScale enabled JPEG is not yet widely implemented, so many
+decoders will be unable to view a SmartScale extended JPEG file at all.
+.TP
+.B \-dct int
+Use integer DCT method (default).
+.TP
+.B \-dct fast
+Use fast integer DCT (less accurate).
+.TP
+.B \-dct float
+Use floating-point DCT method.
+The float method is very slightly more accurate than the int method, but is
+much slower unless your machine has very fast floating-point hardware.  Also
+note that results of the floating-point method may vary slightly across
+machines, while the integer methods should give the same results everywhere.
+The fast integer method is much less accurate than the other two.
+.TP
+.B \-nosmooth
+Don't use high-quality downsampling.
+.TP
+.BI \-restart " N"
+Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
+attached to the number.
+.B \-restart 0
+(the default) means no restart markers.
+.TP
+.BI \-smooth " N"
+Smooth the input image to eliminate dithering noise.  N, ranging from 1 to
+100, indicates the strength of smoothing.  0 (the default) means no smoothing.
+.TP
+.BI \-maxmemory " N"
+Set limit for amount of memory to use in processing large images.  Value is
+in thousands of bytes, or millions of bytes if "M" is attached to the
+number.  For example,
+.B \-max 4m
+selects 4000000 bytes.  If more space is needed, temporary files will be used.
+.TP
+.BI \-outfile " name"
+Send output image to the named file, not to standard output.
+.TP
+.B \-verbose
+Enable debug printout.  More
+.BR \-v 's
+give more output.  Also, version information is printed at startup.
+.TP
+.B \-debug
+Same as
+.BR \-verbose .
+.PP
+The
+.B \-restart
+option inserts extra markers that allow a JPEG decoder to resynchronize after
+a transmission error.  Without restart markers, any damage to a compressed
+file will usually ruin the image from the point of the error to the end of the
+image; with restart markers, the damage is usually confined to the portion of
+the image up to the next restart marker.  Of course, the restart markers
+occupy extra space.  We recommend
+.B \-restart 1
+for images that will be transmitted across unreliable networks such as Usenet.
+.PP
+The
+.B \-smooth
+option filters the input to eliminate fine-scale noise.  This is often useful
+when converting dithered images to JPEG: a moderate smoothing factor of 10 to
+50 gets rid of dithering patterns in the input file, resulting in a smaller
+JPEG file and a better-looking image.  Too large a smoothing factor will
+visibly blur the image, however.
+.PP
+Switches for wizards:
+.TP
+.B \-baseline
+Force baseline-compatible quantization tables to be generated.  This clamps
+quantization values to 8 bits even at low quality settings.  (This switch is
+poorly named, since it does not ensure that the output is actually baseline
+JPEG.  For example, you can use
+.B \-baseline
+and
+.B \-progressive
+together.)
+.TP
+.BI \-qtables " file"
+Use the quantization tables given in the specified text file.
+.TP
+.BI \-qslots " N[,...]"
+Select which quantization table to use for each color component.
+.TP
+.BI \-sample " HxV[,...]"
+Set JPEG sampling factors for each color component.
+.TP
+.BI \-scans " file"
+Use the scan script given in the specified text file.
+.PP
+The "wizard" switches are intended for experimentation with JPEG.  If you
+don't know what you are doing, \fBdon't use them\fR.  These switches are
+documented further in the file wizard.txt.
+.SH EXAMPLES
+.LP
+This example compresses the PPM file foo.ppm with a quality factor of
+60 and saves the output as foo.jpg:
+.IP
+.B cjpeg \-quality
+.I 60 foo.ppm
+.B >
+.I foo.jpg
+.SH HINTS
+Color GIF files are not the ideal input for JPEG; JPEG is really intended for
+compressing full-color (24-bit) images.  In particular, don't try to convert
+cartoons, line drawings, and other images that have only a few distinct
+colors.  GIF works great on these, JPEG does not.  If you want to convert a
+GIF to JPEG, you should experiment with
+.BR cjpeg 's
+.B \-quality
+and
+.B \-smooth
+options to get a satisfactory conversion.
+.B \-smooth 10
+or so is often helpful.
+.PP
+Avoid running an image through a series of JPEG compression/decompression
+cycles.  Image quality loss will accumulate; after ten or so cycles the image
+may be noticeably worse than it was after one cycle.  It's best to use a
+lossless format while manipulating an image, then convert to JPEG format when
+you are ready to file the image away.
+.PP
+The
+.B \-optimize
+option to
+.B cjpeg
+is worth using when you are making a "final" version for posting or archiving.
+It's also a win when you are using low quality settings to make very small
+JPEG files; the percentage improvement is often a lot more than it is on
+larger files.  (At present,
+.B \-optimize
+mode is always selected when generating progressive JPEG files.)
+.SH ENVIRONMENT
+.TP
+.B JPEGMEM
+If this environment variable is set, its value is the default memory limit.
+The value is specified as described for the
+.B \-maxmemory
+switch.
+.B JPEGMEM
+overrides the default value specified when the program was compiled, and
+itself is overridden by an explicit
+.BR \-maxmemory .
+.SH SEE ALSO
+.BR djpeg (1),
+.BR jpegtran (1),
+.BR rdjpgcom (1),
+.BR wrjpgcom (1)
+.br
+.BR ppm (5),
+.BR pgm (5)
+.br
+Wallace, Gregory K.  "The JPEG Still Picture Compression Standard",
+Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
+.SH AUTHOR
+Independent JPEG Group
+.SH BUGS
+GIF input files are no longer supported, to avoid the Unisys LZW patent.
+(Conversion of GIF files to JPEG is usually a bad idea anyway.)
+.PP
+Not all variants of BMP and Targa file formats are supported.
+.PP
+The
+.B \-targa
+switch is not a bug, it's a feature.  (It would be a bug if the Targa format
+designers had not been clueless.)
diff --git a/jpeg-8d/cjpeg.c b/jpeg-8d/cjpeg.c
new file mode 100644
index 0000000..9a9a09a
--- /dev/null
+++ b/jpeg-8d/cjpeg.c
@@ -0,0 +1,643 @@
+/*
+ * cjpeg.c
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2003-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a command-line user interface for the JPEG compressor.
+ * It should work on any system with Unix- or MS-DOS-style command lines.
+ *
+ * Two different command line styles are permitted, depending on the
+ * compile-time switch TWO_FILE_COMMANDLINE:
+ *	cjpeg [options]  inputfile outputfile
+ *	cjpeg [options]  [inputfile]
+ * In the second style, output is always to standard output, which you'd
+ * normally redirect to a file or pipe to some other program.  Input is
+ * either from a named file or from standard input (typically redirected).
+ * The second style is convenient on Unix but is unhelpful on systems that
+ * don't support pipes.  Also, you MUST use the first style if your system
+ * doesn't do binary I/O to stdin/stdout.
+ * To simplify script writing, the "-outfile" switch is provided.  The syntax
+ *	cjpeg [options]  -outfile outputfile  inputfile
+ * works regardless of which command line style is used.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include "jversion.h"		/* for version message */
+
+#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
+#ifdef __MWERKS__
+#include <SIOUX.h>              /* Metrowerks needs this */
+#include <console.h>		/* ... and this */
+#endif
+#ifdef THINK_C
+#include <console.h>		/* Think declares it here */
+#endif
+#endif
+
+
+/* Create the add-on message string table. */
+
+#define JMESSAGE(code,string)	string ,
+
+static const char * const cdjpeg_message_table[] = {
+#include "cderror.h"
+  NULL
+};
+
+
+/*
+ * This routine determines what format the input file is,
+ * and selects the appropriate input-reading module.
+ *
+ * To determine which family of input formats the file belongs to,
+ * we may look only at the first byte of the file, since C does not
+ * guarantee that more than one character can be pushed back with ungetc.
+ * Looking at additional bytes would require one of these approaches:
+ *     1) assume we can fseek() the input file (fails for piped input);
+ *     2) assume we can push back more than one character (works in
+ *        some C implementations, but unportable);
+ *     3) provide our own buffering (breaks input readers that want to use
+ *        stdio directly, such as the RLE library);
+ * or  4) don't put back the data, and modify the input_init methods to assume
+ *        they start reading after the start of file (also breaks RLE library).
+ * #1 is attractive for MS-DOS but is untenable on Unix.
+ *
+ * The most portable solution for file types that can't be identified by their
+ * first byte is to make the user tell us what they are.  This is also the
+ * only approach for "raw" file types that contain only arbitrary values.
+ * We presently apply this method for Targa files.  Most of the time Targa
+ * files start with 0x00, so we recognize that case.  Potentially, however,
+ * a Targa file could start with any byte value (byte 0 is the length of the
+ * seldom-used ID field), so we provide a switch to force Targa input mode.
+ */
+
+static boolean is_targa;	/* records user -targa switch */
+
+
+LOCAL(cjpeg_source_ptr)
+select_file_type (j_compress_ptr cinfo, FILE * infile)
+{
+  int c;
+
+  if (is_targa) {
+#ifdef TARGA_SUPPORTED
+    return jinit_read_targa(cinfo);
+#else
+    ERREXIT(cinfo, JERR_TGA_NOTCOMP);
+#endif
+  }
+
+  if ((c = getc(infile)) == EOF)
+    ERREXIT(cinfo, JERR_INPUT_EMPTY);
+  if (ungetc(c, infile) == EOF)
+    ERREXIT(cinfo, JERR_UNGETC_FAILED);
+
+  switch (c) {
+#ifdef BMP_SUPPORTED
+  case 'B':
+    return jinit_read_bmp(cinfo);
+#endif
+#ifdef GIF_SUPPORTED
+  case 'G':
+    return jinit_read_gif(cinfo);
+#endif
+#ifdef PPM_SUPPORTED
+  case 'P':
+    return jinit_read_ppm(cinfo);
+#endif
+#ifdef RLE_SUPPORTED
+  case 'R':
+    return jinit_read_rle(cinfo);
+#endif
+#ifdef TARGA_SUPPORTED
+  case 0x00:
+    return jinit_read_targa(cinfo);
+#endif
+  default:
+    ERREXIT(cinfo, JERR_UNKNOWN_FORMAT);
+    break;
+  }
+
+  return NULL;			/* suppress compiler warnings */
+}
+
+
+/*
+ * Argument-parsing code.
+ * The switch parser is designed to be useful with DOS-style command line
+ * syntax, ie, intermixed switches and file names, where only the switches
+ * to the left of a given file name affect processing of that file.
+ * The main program in this file doesn't actually use this capability...
+ */
+
+
+static const char * progname;	/* program name for error messages */
+static char * outfilename;	/* for -outfile switch */
+
+
+LOCAL(void)
+usage (void)
+/* complain about bad command line */
+{
+  fprintf(stderr, "usage: %s [switches] ", progname);
+#ifdef TWO_FILE_COMMANDLINE
+  fprintf(stderr, "inputfile outputfile\n");
+#else
+  fprintf(stderr, "[inputfile]\n");
+#endif
+
+  fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -quality N[,...]   Compression quality (0..100; 5-95 is useful range)\n");
+  fprintf(stderr, "  -grayscale     Create monochrome JPEG file\n");
+  fprintf(stderr, "  -rgb           Create RGB JPEG file\n");
+#ifdef ENTROPY_OPT_SUPPORTED
+  fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
+#endif
+#ifdef C_PROGRESSIVE_SUPPORTED
+  fprintf(stderr, "  -progressive   Create progressive JPEG file\n");
+#endif
+#ifdef DCT_SCALING_SUPPORTED
+  fprintf(stderr, "  -scale M/N     Scale image by fraction M/N, eg, 1/2\n");
+#endif
+#ifdef TARGA_SUPPORTED
+  fprintf(stderr, "  -targa         Input file is Targa format (usually not needed)\n");
+#endif
+  fprintf(stderr, "Switches for advanced users:\n");
+#ifdef C_ARITH_CODING_SUPPORTED
+  fprintf(stderr, "  -arithmetic    Use arithmetic coding\n");
+#endif
+#ifdef DCT_SCALING_SUPPORTED
+  fprintf(stderr, "  -block N       DCT block size (1..16; default is 8)\n");
+#endif
+#ifdef DCT_ISLOW_SUPPORTED
+  fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  fprintf(stderr, "  -dct fast      Use fast integer DCT (less accurate)%s\n",
+	  (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  fprintf(stderr, "  -dct float     Use floating-point DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
+#endif
+  fprintf(stderr, "  -nosmooth      Don't use high-quality downsampling\n");
+  fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
+#ifdef INPUT_SMOOTHING_SUPPORTED
+  fprintf(stderr, "  -smooth N      Smooth dithered input (N=1..100 is strength)\n");
+#endif
+  fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
+  fprintf(stderr, "  -outfile name  Specify name for output file\n");
+  fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
+  fprintf(stderr, "Switches for wizards:\n");
+  fprintf(stderr, "  -baseline      Force baseline quantization tables\n");
+  fprintf(stderr, "  -qtables file  Use quantization tables given in file\n");
+  fprintf(stderr, "  -qslots N[,...]    Set component quantization tables\n");
+  fprintf(stderr, "  -sample HxV[,...]  Set component sampling factors\n");
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+  fprintf(stderr, "  -scans file    Create multi-scan JPEG per script file\n");
+#endif
+  exit(EXIT_FAILURE);
+}
+
+
+LOCAL(int)
+parse_switches (j_compress_ptr cinfo, int argc, char **argv,
+		int last_file_arg_seen, boolean for_real)
+/* Parse optional switches.
+ * Returns argv[] index of first file-name argument (== argc if none).
+ * Any file names with indexes <= last_file_arg_seen are ignored;
+ * they have presumably been processed in a previous iteration.
+ * (Pass 0 for last_file_arg_seen on the first or only iteration.)
+ * for_real is FALSE on the first (dummy) pass; we may skip any expensive
+ * processing.
+ */
+{
+  int argn;
+  char * arg;
+  boolean force_baseline;
+  boolean simple_progressive;
+  char * qualityarg = NULL;	/* saves -quality parm if any */
+  char * qtablefile = NULL;	/* saves -qtables filename if any */
+  char * qslotsarg = NULL;	/* saves -qslots parm if any */
+  char * samplearg = NULL;	/* saves -sample parm if any */
+  char * scansarg = NULL;	/* saves -scans parm if any */
+
+  /* Set up default JPEG parameters. */
+
+  force_baseline = FALSE;	/* by default, allow 16-bit quantizers */
+  simple_progressive = FALSE;
+  is_targa = FALSE;
+  outfilename = NULL;
+  cinfo->err->trace_level = 0;
+
+  /* Scan command line options, adjust parameters */
+
+  for (argn = 1; argn < argc; argn++) {
+    arg = argv[argn];
+    if (*arg != '-') {
+      /* Not a switch, must be a file name argument */
+      if (argn <= last_file_arg_seen) {
+	outfilename = NULL;	/* -outfile applies to just one input file */
+	continue;		/* ignore this name if previously processed */
+      }
+      break;			/* else done parsing switches */
+    }
+    arg++;			/* advance past switch marker character */
+
+    if (keymatch(arg, "arithmetic", 1)) {
+      /* Use arithmetic coding. */
+#ifdef C_ARITH_CODING_SUPPORTED
+      cinfo->arith_code = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, arithmetic coding not supported\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "baseline", 2)) {
+      /* Force baseline-compatible output (8-bit quantizer values). */
+      force_baseline = TRUE;
+
+    } else if (keymatch(arg, "block", 2)) {
+      /* Set DCT block size. */
+#if defined DCT_SCALING_SUPPORTED && JPEG_LIB_VERSION_MAJOR >= 8 && \
+      (JPEG_LIB_VERSION_MAJOR > 8 || JPEG_LIB_VERSION_MINOR >= 3)
+      int val;
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &val) != 1)
+	usage();
+      if (val < 1 || val > 16)
+	usage();
+      cinfo->block_size = val;
+#else
+      fprintf(stderr, "%s: sorry, block size setting not supported\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "dct", 2)) {
+      /* Select DCT algorithm. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "int", 1)) {
+	cinfo->dct_method = JDCT_ISLOW;
+      } else if (keymatch(argv[argn], "fast", 2)) {
+	cinfo->dct_method = JDCT_IFAST;
+      } else if (keymatch(argv[argn], "float", 2)) {
+	cinfo->dct_method = JDCT_FLOAT;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
+      /* Enable debug printouts. */
+      /* On first -d, print version identification */
+      static boolean printed_version = FALSE;
+
+      if (! printed_version) {
+	fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n",
+		JVERSION, JCOPYRIGHT);
+	printed_version = TRUE;
+      }
+      cinfo->err->trace_level++;
+
+    } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
+      /* Force a monochrome JPEG file to be generated. */
+      jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
+
+    } else if (keymatch(arg, "rgb", 3)) {
+      /* Force an RGB JPEG file to be generated. */
+      jpeg_set_colorspace(cinfo, JCS_RGB);
+
+    } else if (keymatch(arg, "maxmemory", 3)) {
+      /* Maximum memory in Kb (or Mb with 'm'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (ch == 'm' || ch == 'M')
+	lval *= 1000L;
+      cinfo->mem->max_memory_to_use = lval * 1000L;
+
+    } else if (keymatch(arg, "nosmooth", 3)) {
+      /* Suppress fancy downsampling */
+      cinfo->do_fancy_downsampling = FALSE;
+
+    } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
+      /* Enable entropy parm optimization. */
+#ifdef ENTROPY_OPT_SUPPORTED
+      cinfo->optimize_coding = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "outfile", 4)) {
+      /* Set output file name. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      outfilename = argv[argn];	/* save it away for later use */
+
+    } else if (keymatch(arg, "progressive", 1)) {
+      /* Select simple progressive mode. */
+#ifdef C_PROGRESSIVE_SUPPORTED
+      simple_progressive = TRUE;
+      /* We must postpone execution until num_components is known. */
+#else
+      fprintf(stderr, "%s: sorry, progressive output was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "quality", 1)) {
+      /* Quality ratings (quantization table scaling factors). */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      qualityarg = argv[argn];
+
+    } else if (keymatch(arg, "qslots", 2)) {
+      /* Quantization table slot numbers. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      qslotsarg = argv[argn];
+      /* Must delay setting qslots until after we have processed any
+       * colorspace-determining switches, since jpeg_set_colorspace sets
+       * default quant table numbers.
+       */
+
+    } else if (keymatch(arg, "qtables", 2)) {
+      /* Quantization tables fetched from file. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      qtablefile = argv[argn];
+      /* We postpone actually reading the file in case -quality comes later. */
+
+    } else if (keymatch(arg, "restart", 1)) {
+      /* Restart interval in MCU rows (or in MCUs with 'b'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (lval < 0 || lval > 65535L)
+	usage();
+      if (ch == 'b' || ch == 'B') {
+	cinfo->restart_interval = (unsigned int) lval;
+	cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
+      } else {
+	cinfo->restart_in_rows = (int) lval;
+	/* restart_interval will be computed during startup */
+      }
+
+    } else if (keymatch(arg, "sample", 2)) {
+      /* Set sampling factors. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      samplearg = argv[argn];
+      /* Must delay setting sample factors until after we have processed any
+       * colorspace-determining switches, since jpeg_set_colorspace sets
+       * default sampling factors.
+       */
+
+    } else if (keymatch(arg, "scale", 4)) {
+      /* Scale the image by a fraction M/N. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d/%d",
+		 &cinfo->scale_num, &cinfo->scale_denom) != 2)
+	usage();
+
+    } else if (keymatch(arg, "scans", 4)) {
+      /* Set scan script. */
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      scansarg = argv[argn];
+      /* We must postpone reading the file in case -progressive appears. */
+#else
+      fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "smooth", 2)) {
+      /* Set input smoothing factor. */
+      int val;
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &val) != 1)
+	usage();
+      if (val < 0 || val > 100)
+	usage();
+      cinfo->smoothing_factor = val;
+
+    } else if (keymatch(arg, "targa", 1)) {
+      /* Input file is Targa format. */
+      is_targa = TRUE;
+
+    } else {
+      usage();			/* bogus switch */
+    }
+  }
+
+  /* Post-switch-scanning cleanup */
+
+  if (for_real) {
+
+    /* Set quantization tables for selected quality. */
+    /* Some or all may be overridden if -qtables is present. */
+    if (qualityarg != NULL)	/* process -quality if it was present */
+      if (! set_quality_ratings(cinfo, qualityarg, force_baseline))
+	usage();
+
+    if (qtablefile != NULL)	/* process -qtables if it was present */
+      if (! read_quant_tables(cinfo, qtablefile, force_baseline))
+	usage();
+
+    if (qslotsarg != NULL)	/* process -qslots if it was present */
+      if (! set_quant_slots(cinfo, qslotsarg))
+	usage();
+
+    if (samplearg != NULL)	/* process -sample if it was present */
+      if (! set_sample_factors(cinfo, samplearg))
+	usage();
+
+#ifdef C_PROGRESSIVE_SUPPORTED
+    if (simple_progressive)	/* process -progressive; -scans can override */
+      jpeg_simple_progression(cinfo);
+#endif
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+    if (scansarg != NULL)	/* process -scans if it was present */
+      if (! read_scan_script(cinfo, scansarg))
+	usage();
+#endif
+  }
+
+  return argn;			/* return index of next arg (file name) */
+}
+
+
+/*
+ * The main program.
+ */
+
+int
+main (int argc, char **argv)
+{
+  struct jpeg_compress_struct cinfo;
+  struct jpeg_error_mgr jerr;
+#ifdef PROGRESS_REPORT
+  struct cdjpeg_progress_mgr progress;
+#endif
+  int file_index;
+  cjpeg_source_ptr src_mgr;
+  FILE * input_file;
+  FILE * output_file;
+  JDIMENSION num_scanlines;
+
+  /* On Mac, fetch a command line. */
+#ifdef USE_CCOMMAND
+  argc = ccommand(&argv);
+#endif
+
+  progname = argv[0];
+  if (progname == NULL || progname[0] == 0)
+    progname = "cjpeg";		/* in case C library doesn't provide it */
+
+  /* Initialize the JPEG compression object with default error handling. */
+  cinfo.err = jpeg_std_error(&jerr);
+  jpeg_create_compress(&cinfo);
+  /* Add some application-specific error messages (from cderror.h) */
+  jerr.addon_message_table = cdjpeg_message_table;
+  jerr.first_addon_message = JMSG_FIRSTADDONCODE;
+  jerr.last_addon_message = JMSG_LASTADDONCODE;
+
+  /* Now safe to enable signal catcher. */
+#ifdef NEED_SIGNAL_CATCHER
+  enable_signal_catcher((j_common_ptr) &cinfo);
+#endif
+
+  /* Initialize JPEG parameters.
+   * Much of this may be overridden later.
+   * In particular, we don't yet know the input file's color space,
+   * but we need to provide some value for jpeg_set_defaults() to work.
+   */
+
+  cinfo.in_color_space = JCS_RGB; /* arbitrary guess */
+  jpeg_set_defaults(&cinfo);
+
+  /* Scan command line to find file names.
+   * It is convenient to use just one switch-parsing routine, but the switch
+   * values read here are ignored; we will rescan the switches after opening
+   * the input file.
+   */
+
+  file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
+
+#ifdef TWO_FILE_COMMANDLINE
+  /* Must have either -outfile switch or explicit output file name */
+  if (outfilename == NULL) {
+    if (file_index != argc-2) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+    outfilename = argv[file_index+1];
+  } else {
+    if (file_index != argc-1) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+  }
+#else
+  /* Unix style: expect zero or one file name */
+  if (file_index < argc-1) {
+    fprintf(stderr, "%s: only one input file\n", progname);
+    usage();
+  }
+#endif /* TWO_FILE_COMMANDLINE */
+
+  /* Open the input file. */
+  if (file_index < argc) {
+    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default input file is stdin */
+    input_file = read_stdin();
+  }
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+    output_file = write_stdout();
+  }
+
+#ifdef PROGRESS_REPORT
+  start_progress_monitor((j_common_ptr) &cinfo, &progress);
+#endif
+
+  /* Figure out the input file format, and set up to read it. */
+  src_mgr = select_file_type(&cinfo, input_file);
+  src_mgr->input_file = input_file;
+
+  /* Read the input file header to obtain file size & colorspace. */
+  (*src_mgr->start_input) (&cinfo, src_mgr);
+
+  /* Now that we know input colorspace, fix colorspace-dependent defaults */
+  jpeg_default_colorspace(&cinfo);
+
+  /* Adjust default compression parameters by re-parsing the options */
+  file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
+
+  /* Specify data destination for compression */
+  jpeg_stdio_dest(&cinfo, output_file);
+
+  /* Start compressor */
+  jpeg_start_compress(&cinfo, TRUE);
+
+  /* Process data */
+  while (cinfo.next_scanline < cinfo.image_height) {
+    num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr);
+    (void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines);
+  }
+
+  /* Finish compression and release memory */
+  (*src_mgr->finish_input) (&cinfo, src_mgr);
+  jpeg_finish_compress(&cinfo);
+  jpeg_destroy_compress(&cinfo);
+
+  /* Close files, if we opened them */
+  if (input_file != stdin)
+    fclose(input_file);
+  if (output_file != stdout)
+    fclose(output_file);
+
+#ifdef PROGRESS_REPORT
+  end_progress_monitor((j_common_ptr) &cinfo);
+#endif
+
+  /* All done. */
+  exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
+  return 0;			/* suppress no-return-value warnings */
+}
diff --git a/jpeg-8d/ckconfig.c b/jpeg-8d/ckconfig.c
new file mode 100644
index 0000000..e658623
--- /dev/null
+++ b/jpeg-8d/ckconfig.c
@@ -0,0 +1,402 @@
+/*
+ * ckconfig.c
+ *
+ * Copyright (C) 1991-1994, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ */
+
+/*
+ * This program is intended to help you determine how to configure the JPEG
+ * software for installation on a particular system.  The idea is to try to
+ * compile and execute this program.  If your compiler fails to compile the
+ * program, make changes as indicated in the comments below.  Once you can
+ * compile the program, run it, and it will produce a "jconfig.h" file for
+ * your system.
+ *
+ * As a general rule, each time you try to compile this program,
+ * pay attention only to the *first* error message you get from the compiler.
+ * Many C compilers will issue lots of spurious error messages once they
+ * have gotten confused.  Go to the line indicated in the first error message,
+ * and read the comments preceding that line to see what to change.
+ *
+ * Almost all of the edits you may need to make to this program consist of
+ * changing a line that reads "#define SOME_SYMBOL" to "#undef SOME_SYMBOL",
+ * or vice versa.  This is called defining or undefining that symbol.
+ */
+
+
+/* First we must see if your system has the include files we need.
+ * We start out with the assumption that your system has all the ANSI-standard
+ * include files.  If you get any error trying to include one of these files,
+ * undefine the corresponding HAVE_xxx symbol.
+ */
+
+#define HAVE_STDDEF_H		/* replace 'define' by 'undef' if error here */
+#ifdef HAVE_STDDEF_H		/* next line will be skipped if you undef... */
+#include <stddef.h>
+#endif
+
+#define HAVE_STDLIB_H		/* same thing for stdlib.h */
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+
+#include <stdio.h>		/* If you ain't got this, you ain't got C. */
+
+/* We have to see if your string functions are defined by
+ * strings.h (old BSD convention) or string.h (everybody else).
+ * We try the non-BSD convention first; define NEED_BSD_STRINGS
+ * if the compiler says it can't find string.h.
+ */
+
+#undef NEED_BSD_STRINGS
+
+#ifdef NEED_BSD_STRINGS
+#include <strings.h>
+#else
+#include <string.h>
+#endif
+
+/* On some systems (especially older Unix machines), type size_t is
+ * defined only in the include file <sys/types.h>.  If you get a failure
+ * on the size_t test below, try defining NEED_SYS_TYPES_H.
+ */
+
+#undef NEED_SYS_TYPES_H		/* start by assuming we don't need it */
+#ifdef NEED_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+
+
+/* Usually type size_t is defined in one of the include files we've included
+ * above.  If not, you'll get an error on the "typedef size_t my_size_t;" line.
+ * In that case, first try defining NEED_SYS_TYPES_H just above.
+ * If that doesn't work, you'll have to search through your system library
+ * to figure out which include file defines "size_t".  Look for a line that
+ * says "typedef something-or-other size_t;".  Then, change the line below
+ * that says "#include <someincludefile.h>" to instead include the file
+ * you found size_t in, and define NEED_SPECIAL_INCLUDE.  If you can't find
+ * type size_t anywhere, try replacing "#include <someincludefile.h>" with
+ * "typedef unsigned int size_t;".
+ */
+
+#undef NEED_SPECIAL_INCLUDE	/* assume we DON'T need it, for starters */
+
+#ifdef NEED_SPECIAL_INCLUDE
+#include <someincludefile.h>
+#endif
+
+typedef size_t my_size_t;	/* The payoff: do we have size_t now? */
+
+
+/* The next question is whether your compiler supports ANSI-style function
+ * prototypes.  You need to know this in order to choose between using
+ * makefile.ansi and using makefile.unix.
+ * The #define line below is set to assume you have ANSI function prototypes.
+ * If you get an error in this group of lines, undefine HAVE_PROTOTYPES.
+ */
+
+#define HAVE_PROTOTYPES
+
+#ifdef HAVE_PROTOTYPES
+int testfunction (int arg1, int * arg2); /* check prototypes */
+
+struct methods_struct {		/* check method-pointer declarations */
+  int (*error_exit) (char *msgtext);
+  int (*trace_message) (char *msgtext);
+  int (*another_method) (void);
+};
+
+int testfunction (int arg1, int * arg2) /* check definitions */
+{
+  return arg2[arg1];
+}
+
+int test2function (void)	/* check void arg list */
+{
+  return 0;
+}
+#endif
+
+
+/* Now we want to find out if your compiler knows what "unsigned char" means.
+ * If you get an error on the "unsigned char un_char;" line,
+ * then undefine HAVE_UNSIGNED_CHAR.
+ */
+
+#define HAVE_UNSIGNED_CHAR
+
+#ifdef HAVE_UNSIGNED_CHAR
+unsigned char un_char;
+#endif
+
+
+/* Now we want to find out if your compiler knows what "unsigned short" means.
+ * If you get an error on the "unsigned short un_short;" line,
+ * then undefine HAVE_UNSIGNED_SHORT.
+ */
+
+#define HAVE_UNSIGNED_SHORT
+
+#ifdef HAVE_UNSIGNED_SHORT
+unsigned short un_short;
+#endif
+
+
+/* Now we want to find out if your compiler understands type "void".
+ * If you get an error anywhere in here, undefine HAVE_VOID.
+ */
+
+#define HAVE_VOID
+
+#ifdef HAVE_VOID
+/* Caution: a C++ compiler will insist on complete prototypes */
+typedef void * void_ptr;	/* check void * */
+#ifdef HAVE_PROTOTYPES		/* check ptr to function returning void */
+typedef void (*void_func) (int a, int b);
+#else
+typedef void (*void_func) ();
+#endif
+
+#ifdef HAVE_PROTOTYPES		/* check void function result */
+void test3function (void_ptr arg1, void_func arg2)
+#else
+void test3function (arg1, arg2)
+     void_ptr arg1;
+     void_func arg2;
+#endif
+{
+  char * locptr = (char *) arg1; /* check casting to and from void * */
+  arg1 = (void *) locptr;
+  (*arg2) (1, 2);		/* check call of fcn returning void */
+}
+#endif
+
+
+/* Now we want to find out if your compiler knows what "const" means.
+ * If you get an error here, undefine HAVE_CONST.
+ */
+
+#define HAVE_CONST
+
+#ifdef HAVE_CONST
+static const int carray[3] = {1, 2, 3};
+
+#ifdef HAVE_PROTOTYPES
+int test4function (const int arg1)
+#else
+int test4function (arg1)
+     const int arg1;
+#endif
+{
+  return carray[arg1];
+}
+#endif
+
+
+/* If you get an error or warning about this structure definition,
+ * define INCOMPLETE_TYPES_BROKEN.
+ */
+
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifndef INCOMPLETE_TYPES_BROKEN
+typedef struct undefined_structure * undef_struct_ptr;
+#endif
+
+
+/* If you get an error about duplicate names,
+ * define NEED_SHORT_EXTERNAL_NAMES.
+ */
+
+#undef NEED_SHORT_EXTERNAL_NAMES
+
+#ifndef NEED_SHORT_EXTERNAL_NAMES
+
+int possibly_duplicate_function ()
+{
+  return 0;
+}
+
+int possibly_dupli_function ()
+{
+  return 1;
+}
+
+#endif
+
+
+
+/************************************************************************
+ *  OK, that's it.  You should not have to change anything beyond this
+ *  point in order to compile and execute this program.  (You might get
+ *  some warnings, but you can ignore them.)
+ *  When you run the program, it will make a couple more tests that it
+ *  can do automatically, and then it will create jconfig.h and print out
+ *  any additional suggestions it has.
+ ************************************************************************
+ */
+
+
+#ifdef HAVE_PROTOTYPES
+int is_char_signed (int arg)
+#else
+int is_char_signed (arg)
+     int arg;
+#endif
+{
+  if (arg == 189) {		/* expected result for unsigned char */
+    return 0;			/* type char is unsigned */
+  }
+  else if (arg != -67) {	/* expected result for signed char */
+    printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
+    printf("I fear the JPEG software will not work at all.\n\n");
+  }
+  return 1;			/* assume char is signed otherwise */
+}
+
+
+#ifdef HAVE_PROTOTYPES
+int is_shifting_signed (long arg)
+#else
+int is_shifting_signed (arg)
+     long arg;
+#endif
+/* See whether right-shift on a long is signed or not. */
+{
+  long res = arg >> 4;
+
+  if (res == -0x7F7E80CL) {	/* expected result for signed shift */
+    return 1;			/* right shift is signed */
+  }
+  /* see if unsigned-shift hack will fix it. */
+  /* we can't just test exact value since it depends on width of long... */
+  res |= (~0L) << (32-4);
+  if (res == -0x7F7E80CL) {	/* expected result now? */
+    return 0;			/* right shift is unsigned */
+  }
+  printf("Right shift isn't acting as I expect it to.\n");
+  printf("I fear the JPEG software will not work at all.\n\n");
+  return 0;			/* try it with unsigned anyway */
+}
+
+
+#ifdef HAVE_PROTOTYPES
+int main (int argc, char ** argv)
+#else
+int main (argc, argv)
+     int argc;
+     char ** argv;
+#endif
+{
+  char signed_char_check = (char) (-67);
+  FILE *outfile;
+
+  /* Attempt to write jconfig.h */
+  if ((outfile = fopen("jconfig.h", "w")) == NULL) {
+    printf("Failed to write jconfig.h\n");
+    return 1;
+  }
+
+  /* Write out all the info */
+  fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n");
+  fprintf(outfile, "/* see jconfig.txt for explanations */\n\n");
+#ifdef HAVE_PROTOTYPES
+  fprintf(outfile, "#define HAVE_PROTOTYPES\n");
+#else
+  fprintf(outfile, "#undef HAVE_PROTOTYPES\n");
+#endif
+#ifdef HAVE_UNSIGNED_CHAR
+  fprintf(outfile, "#define HAVE_UNSIGNED_CHAR\n");
+#else
+  fprintf(outfile, "#undef HAVE_UNSIGNED_CHAR\n");
+#endif
+#ifdef HAVE_UNSIGNED_SHORT
+  fprintf(outfile, "#define HAVE_UNSIGNED_SHORT\n");
+#else
+  fprintf(outfile, "#undef HAVE_UNSIGNED_SHORT\n");
+#endif
+#ifdef HAVE_VOID
+  fprintf(outfile, "/* #define void char */\n");
+#else
+  fprintf(outfile, "#define void char\n");
+#endif
+#ifdef HAVE_CONST
+  fprintf(outfile, "/* #define const */\n");
+#else
+  fprintf(outfile, "#define const\n");
+#endif
+  if (is_char_signed((int) signed_char_check))
+    fprintf(outfile, "#undef CHAR_IS_UNSIGNED\n");
+  else
+    fprintf(outfile, "#define CHAR_IS_UNSIGNED\n");
+#ifdef HAVE_STDDEF_H
+  fprintf(outfile, "#define HAVE_STDDEF_H\n");
+#else
+  fprintf(outfile, "#undef HAVE_STDDEF_H\n");
+#endif
+#ifdef HAVE_STDLIB_H
+  fprintf(outfile, "#define HAVE_STDLIB_H\n");
+#else
+  fprintf(outfile, "#undef HAVE_STDLIB_H\n");
+#endif
+#ifdef NEED_BSD_STRINGS
+  fprintf(outfile, "#define NEED_BSD_STRINGS\n");
+#else
+  fprintf(outfile, "#undef NEED_BSD_STRINGS\n");
+#endif
+#ifdef NEED_SYS_TYPES_H
+  fprintf(outfile, "#define NEED_SYS_TYPES_H\n");
+#else
+  fprintf(outfile, "#undef NEED_SYS_TYPES_H\n");
+#endif
+  fprintf(outfile, "#undef NEED_FAR_POINTERS\n");
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+  fprintf(outfile, "#define NEED_SHORT_EXTERNAL_NAMES\n");
+#else
+  fprintf(outfile, "#undef NEED_SHORT_EXTERNAL_NAMES\n");
+#endif
+#ifdef INCOMPLETE_TYPES_BROKEN
+  fprintf(outfile, "#define INCOMPLETE_TYPES_BROKEN\n");
+#else
+  fprintf(outfile, "#undef INCOMPLETE_TYPES_BROKEN\n");
+#endif
+  fprintf(outfile, "\n#ifdef JPEG_INTERNALS\n\n");
+  if (is_shifting_signed(-0x7F7E80B1L))
+    fprintf(outfile, "#undef RIGHT_SHIFT_IS_UNSIGNED\n");
+  else
+    fprintf(outfile, "#define RIGHT_SHIFT_IS_UNSIGNED\n");
+  fprintf(outfile, "\n#endif /* JPEG_INTERNALS */\n");
+  fprintf(outfile, "\n#ifdef JPEG_CJPEG_DJPEG\n\n");
+  fprintf(outfile, "#define BMP_SUPPORTED		/* BMP image file format */\n");
+  fprintf(outfile, "#define GIF_SUPPORTED		/* GIF image file format */\n");
+  fprintf(outfile, "#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */\n");
+  fprintf(outfile, "#undef RLE_SUPPORTED		/* Utah RLE image file format */\n");
+  fprintf(outfile, "#define TARGA_SUPPORTED		/* Targa image file format */\n\n");
+  fprintf(outfile, "#undef TWO_FILE_COMMANDLINE	/* You may need this on non-Unix systems */\n");
+  fprintf(outfile, "#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */\n");
+  fprintf(outfile, "#undef DONT_USE_B_MODE\n");
+  fprintf(outfile, "/* #define PROGRESS_REPORT */	/* optional */\n");
+  fprintf(outfile, "\n#endif /* JPEG_CJPEG_DJPEG */\n");
+
+  /* Close the jconfig.h file */
+  fclose(outfile);
+
+  /* User report */
+  printf("Configuration check for Independent JPEG Group's software done.\n");
+  printf("\nI have written the jconfig.h file for you.\n\n");
+#ifdef HAVE_PROTOTYPES
+  printf("You should use makefile.ansi as the starting point for your Makefile.\n");
+#else
+  printf("You should use makefile.unix as the starting point for your Makefile.\n");
+#endif
+
+#ifdef NEED_SPECIAL_INCLUDE
+  printf("\nYou'll need to change jconfig.h to include the system include file\n");
+  printf("that you found type size_t in, or add a direct definition of type\n");
+  printf("size_t if that's what you used.  Just add it to the end.\n");
+#endif
+
+  return 0;
+}
diff --git a/jpeg-8d/coderules.txt b/jpeg-8d/coderules.txt
new file mode 100644
index 0000000..357929f
--- /dev/null
+++ b/jpeg-8d/coderules.txt
@@ -0,0 +1,118 @@
+IJG JPEG LIBRARY:  CODING RULES
+
+Copyright (C) 1991-1996, Thomas G. Lane.
+This file is part of the Independent JPEG Group's software.
+For conditions of distribution and use, see the accompanying README file.
+
+
+Since numerous people will be contributing code and bug fixes, it's important
+to establish a common coding style.  The goal of using similar coding styles
+is much more important than the details of just what that style is.
+
+In general we follow the recommendations of "Recommended C Style and Coding
+Standards" revision 6.1 (Cannon et al. as modified by Spencer, Keppel and
+Brader).  This document is available in the IJG FTP archive (see
+jpeg/doc/cstyle.ms.tbl.Z, or cstyle.txt.Z for those without nroff/tbl).
+
+Block comments should be laid out thusly:
+
+/*
+ *  Block comments in this style.
+ */
+
+We indent statements in K&R style, e.g.,
+	if (test) {
+	  then-part;
+	} else {
+	  else-part;
+	}
+with two spaces per indentation level.  (This indentation convention is
+handled automatically by GNU Emacs and many other text editors.)
+
+Multi-word names should be written in lower case with underscores, e.g.,
+multi_word_name (not multiWordName).  Preprocessor symbols and enum constants
+are similar but upper case (MULTI_WORD_NAME).  Names should be unique within
+the first fifteen characters.  (On some older systems, global names must be
+unique within six characters.  We accommodate this without cluttering the
+source code by using macros to substitute shorter names.)
+
+We use function prototypes everywhere; we rely on automatic source code
+transformation to feed prototype-less C compilers.  Transformation is done
+by the simple and portable tool 'ansi2knr.c' (courtesy of Ghostscript).
+ansi2knr is not very bright, so it imposes a format requirement on function
+declarations: the function name MUST BEGIN IN COLUMN 1.  Thus all functions
+should be written in the following style:
+
+LOCAL(int *)
+function_name (int a, char *b)
+{
+    code...
+}
+
+Note that each function definition must begin with GLOBAL(type), LOCAL(type),
+or METHODDEF(type).  These macros expand to "static type" or just "type" as
+appropriate.  They provide a readable indication of the routine's usage and
+can readily be changed for special needs.  (For instance, special linkage
+keywords can be inserted for use in Windows DLLs.)
+
+ansi2knr does not transform method declarations (function pointers in
+structs).  We handle these with a macro JMETHOD, defined as
+	#ifdef HAVE_PROTOTYPES
+	#define JMETHOD(type,methodname,arglist)  type (*methodname) arglist
+	#else
+	#define JMETHOD(type,methodname,arglist)  type (*methodname) ()
+	#endif
+which is used like this:
+	struct function_pointers {
+	  JMETHOD(void, init_entropy_encoder, (int somearg, jparms *jp));
+	  JMETHOD(void, term_entropy_encoder, (void));
+	};
+Note the set of parentheses surrounding the parameter list.
+
+A similar solution is used for forward and external function declarations
+(see the EXTERN and JPP macros).
+
+If the code is to work on non-ANSI compilers, we cannot rely on a prototype
+declaration to coerce actual parameters into the right types.  Therefore, use
+explicit casts on actual parameters whenever the actual parameter type is not
+identical to the formal parameter.  Beware of implicit conversions to "int".
+
+It seems there are some non-ANSI compilers in which the sizeof() operator
+is defined to return int, yet size_t is defined as long.  Needless to say,
+this is brain-damaged.  Always use the SIZEOF() macro in place of sizeof(),
+so that the result is guaranteed to be of type size_t.
+
+
+The JPEG library is intended to be used within larger programs.  Furthermore,
+we want it to be reentrant so that it can be used by applications that process
+multiple images concurrently.  The following rules support these requirements:
+
+1. Avoid direct use of file I/O, "malloc", error report printouts, etc;
+pass these through the common routines provided.
+
+2. Minimize global namespace pollution.  Functions should be declared static
+wherever possible.  (Note that our method-based calling conventions help this
+a lot: in many modules only the initialization function will ever need to be
+called directly, so only that function need be externally visible.)  All
+global function names should begin with "jpeg_", and should have an
+abbreviated name (unique in the first six characters) substituted by macro
+when NEED_SHORT_EXTERNAL_NAMES is set.
+
+3. Don't use global variables; anything that must be used in another module
+should be in the common data structures.
+
+4. Don't use static variables except for read-only constant tables.  Variables
+that should be private to a module can be placed into private structures (see
+the system architecture document, structure.txt).
+
+5. Source file names should begin with "j" for files that are part of the
+library proper; source files that are not part of the library, such as cjpeg.c
+and djpeg.c, do not begin with "j".  Keep source file names to eight
+characters (plus ".c" or ".h", etc) to make life easy for MS-DOSers.  Keep
+compression and decompression code in separate source files --- some
+applications may want only one half of the library.
+
+Note: these rules (particularly #4) are not followed religiously in the
+modules that are used in cjpeg/djpeg but are not part of the JPEG library
+proper.  Those modules are not really intended to be used in other
+applications.
diff --git a/jpeg-8d/config.guess b/jpeg-8d/config.guess
new file mode 100644
index 0000000..8152efd
--- /dev/null
+++ b/jpeg-8d/config.guess
@@ -0,0 +1,1522 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+#   2011 Free Software Foundation, Inc.
+
+timestamp='2011-11-11'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner.  Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
+Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+		os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+	echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+	echo m68k-milan-mint${UNAME_RELEASE}
+	exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+	echo m68k-hades-mint${UNAME_RELEASE}
+	exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+	echo m68k-unknown-mint${UNAME_RELEASE}
+	exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[4567])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "${sc_cpu_version}" in
+		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "${sc_kernel_bits}" in
+			  32) HP_ARCH="hppa2.0n" ;;
+			  64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+			esac ;;
+		    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^		//' << EOF >$dummy.c
+
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
+
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
+
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+	exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+	exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+	exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+	exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    5000:UNIX_System_V:4.*:*)
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    *:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    i*:MSYS*:*)
+	echo ${UNAME_MACHINE}-pc-msys
+	exit ;;
+    i*:windows32*:*)
+	# uname -m includes "-pc" on this system.
+	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    *:Interix*:*)
+	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit ;;
+    arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	    else
+		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+	    fi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    cris:Linux:*:*)
+	echo cris-axis-linux-gnu
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+	echo frv-unknown-linux-gnu
+	exit ;;
+    hexagon:Linux:*:*)
+	echo hexagon-unknown-linux-gnu
+	exit ;;
+    i*86:Linux:*:*)
+	LIBC=gnu
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=${UNAME_MACHINE}el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=${UNAME_MACHINE}
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    or32:Linux:*:*)
+	echo or32-unknown-linux-gnu
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-gnu
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit ;;
+    sh64*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-gnu
+	exit ;;
+    x86_64:Linux:*:*)
+	echo x86_64-unknown-linux-gnu
+	exit ;;
+    xtensa*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+	# Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+	exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+		echo mips-nec-sysv${UNAME_RELEASE}
+	else
+		echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+	exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
+	    i386)
+		eval $set_cc_for_build
+		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		      grep IS_64BIT_ARCH >/dev/null
+		  then
+		      UNAME_PROCESSOR="x86_64"
+		  fi
+		fi ;;
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NEO-?:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+	echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+	"4"
+#else
+	""
+#endif
+	); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    c34*)
+	echo c34-convex-bsd
+	exit ;;
+    c38*)
+	echo c38-convex-bsd
+	exit ;;
+    c4*)
+	echo c4-convex-bsd
+	exit ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/jpeg-8d/config.sub b/jpeg-8d/config.sub
new file mode 100644
index 0000000..e76eaf4
--- /dev/null
+++ b/jpeg-8d/config.sub
@@ -0,0 +1,1771 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+#   2011 Free Software Foundation, Inc.
+
+timestamp='2011-11-11'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
+Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray | -microblaze)
+		os=
+		basic_machine=$1
+		;;
+	-bluegene*)
+		os=-cnk
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+	-chorusrdb)
+		os=-chorusrdb
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+        | be32 | be64 \
+	| bfin \
+	| c4x | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| epiphany \
+	| fido | fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| le32 | le64 \
+	| lm32 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep | metag \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64octeon | mips64octeonel \
+	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| moxie \
+	| mt \
+	| msp430 \
+	| nds32 | nds32le | nds32be \
+	| nios | nios2 \
+	| ns16k | ns32k \
+	| open8 \
+	| or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
+	| pyramid \
+	| rl78 | rx \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+	| ubicom32 \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+	| we32k \
+	| x86 | xc16x | xstormy16 | xtensa \
+	| z8k | z80)
+		basic_machine=$basic_machine-unknown
+		;;
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | picochip)
+		# Motorola 68HC11/12.
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
+
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* | avr32-* \
+	| be32-* | be64-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
+	| clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| le32-* | le64-* \
+	| lm32-* \
+	| m32c-* | m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64octeon-* | mips64octeonel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
+	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
+	| nios-* | nios2-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+	| pyramid-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| tahoe-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
+	| tron-* \
+	| ubicom32-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
+	| xstormy16-* | xtensa*-* \
+	| ymp-* \
+	| z8k-* | z80-*)
+		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16 | cr16-*)
+		basic_machine=cr16-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	microblaze)
+		basic_machine=microblaze-xilinx
+		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
+	msys)
+		basic_machine=i386-pc
+		os=-msys
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc | ppcbe)	basic_machine=powerpc-unknown
+		;;
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tile*)
+		basic_machine=$basic_machine-unknown
+		os=-linux-gnu
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+	# First match some system type aliases
+	# that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-auroraux)
+		os=-auroraux
+		;;
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* | -aros* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -openbsd* | -solidbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-kaos*)
+		os=-kaos
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-dicos*)
+		os=-dicos
+		;;
+	-nacl*)
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	score-*)
+		os=-elf
+		;;
+	spu-*)
+		os=-elf
+		;;
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mep-*)
+		os=-elf
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-cnk*|-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/jpeg-8d/configure b/jpeg-8d/configure
new file mode 100644
index 0000000..9ba1383
--- /dev/null
+++ b/jpeg-8d/configure
@@ -0,0 +1,15928 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for libjpeg 8.4.0.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='libjpeg'
+PACKAGE_TARNAME='libjpeg'
+PACKAGE_VERSION='8.4.0'
+PACKAGE_STRING='libjpeg 8.4.0'
+PACKAGE_BUGREPORT=''
+PACKAGE_URL=''
+
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+JPEG_LIB_VERSION
+MEMORYMGR
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+SED
+LIBTOOL
+OBJDUMP
+DLLTOOL
+AS
+HAVE_LD_VERSION_SCRIPT_FALSE
+HAVE_LD_VERSION_SCRIPT_TRUE
+LN_S
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+ANSI2KNR
+U
+EGREP
+GREP
+CPP
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_os
+target_vendor
+target_cpu
+target
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_silent_rules
+enable_dependency_tracking
+enable_maintainer_mode
+enable_ld_version_script
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+enable_maxmem
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures libjpeg 8.4.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/libjpeg]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+  --target=TARGET   configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of libjpeg 8.4.0:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-silent-rules          less verbose build output (undo: `make V=1')
+  --disable-silent-rules         verbose build output (undo: `make V=0')
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-maintainer-mode  enable make rules and dependencies not useful
+			  (and sometimes confusing) to the casual installer
+  --enable-ld-version-script
+                          enable linker version script (default is enabled
+                          when possible)
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-maxmem=N     enable use of temp files, set max mem usage to N MB
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+libjpeg configure 8.4.0
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if eval \${$3+:} false; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by libjpeg $as_me 8.4.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+# Directory where autotools helper scripts lives.
+ac_aux_dir=
+for ac_dir in . "$srcdir"/.; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in . \"$srcdir\"/." "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+# Generate configuration headers.
+ac_config_headers="$ac_config_headers jconfig.h:jconfig.cfg"
+
+
+# Hack: disable autoheader so that it doesn't overwrite our cfg template.
+AUTOHEADER="echo autoheader ignored"
+
+# Check system type
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if ${ac_cv_target+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$target_alias" = x; then
+  ac_cv_target=$ac_cv_host
+else
+  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+# Initialize Automake
+# Don't require all the GNU mandated files
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='libjpeg'
+ VERSION='8.4.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+# Make --enable-silent-rules the default.
+# To get verbose build output you may configure
+# with --disable-silent-rules or use "make V=1".
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in
+yes) AM_DEFAULT_VERBOSITY=0;;
+no)  AM_DEFAULT_VERBOSITY=1;;
+*)   AM_DEFAULT_VERBOSITY=0;;
+esac
+AM_BACKSLASH='\'
+
+
+# This is required when using the de-ANSI-fication feature.
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for function prototypes" >&5
+$as_echo_n "checking for function prototypes... " >&6; }
+if test "$ac_cv_prog_cc_c89" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define PROTOTYPES 1" >>confdefs.h
+
+
+$as_echo "#define __PROTOTYPES 1" >>confdefs.h
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+if test "$ac_cv_prog_cc_stdc" != no; then
+  U= ANSI2KNR=
+else
+  U=_ ANSI2KNR=./ansi2knr
+fi
+# Ensure some checks needed by ansi2knr itself.
+
+for ac_header in string.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default"
+if test "x$ac_cv_header_string_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_STRING_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+# Add configure option --enable-maintainer-mode which enables
+# dependency checking and generation useful to package maintainers.
+# This is made an option to avoid confusing end users.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+    # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+   if test $USE_MAINTAINER_MODE = yes; then
+  MAINTAINER_MODE_TRUE=
+  MAINTAINER_MODE_FALSE='#'
+else
+  MAINTAINER_MODE_TRUE='#'
+  MAINTAINER_MODE_FALSE=
+fi
+
+  MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+# Check for programs
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+   case $ac_cv_prog_cc_stdc in #(
+  no) :
+    ac_cv_prog_cc_c99=no; ac_cv_prog_cc_c89=no ;; #(
+  *) :
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5
+$as_echo_n "checking for $CC option to accept ISO C99... " >&6; }
+if ${ac_cv_prog_cc_c99+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c99=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdlib.h>
+#include <wchar.h>
+#include <stdio.h>
+
+// Check varargs macros.  These examples are taken from C99 6.10.3.5.
+#define debug(...) fprintf (stderr, __VA_ARGS__)
+#define showlist(...) puts (#__VA_ARGS__)
+#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
+static void
+test_varargs_macros (void)
+{
+  int x = 1234;
+  int y = 5678;
+  debug ("Flag");
+  debug ("X = %d\n", x);
+  showlist (The first, second, and third items.);
+  report (x>y, "x is %d but y is %d", x, y);
+}
+
+// Check long long types.
+#define BIG64 18446744073709551615ull
+#define BIG32 4294967295ul
+#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
+#if !BIG_OK
+  your preprocessor is broken;
+#endif
+#if BIG_OK
+#else
+  your preprocessor is broken;
+#endif
+static long long int bignum = -9223372036854775807LL;
+static unsigned long long int ubignum = BIG64;
+
+struct incomplete_array
+{
+  int datasize;
+  double data[];
+};
+
+struct named_init {
+  int number;
+  const wchar_t *name;
+  double average;
+};
+
+typedef const char *ccp;
+
+static inline int
+test_restrict (ccp restrict text)
+{
+  // See if C++-style comments work.
+  // Iterate through items via the restricted pointer.
+  // Also check for declarations in for loops.
+  for (unsigned int i = 0; *(text+i) != '\0'; ++i)
+    continue;
+  return 0;
+}
+
+// Check varargs and va_copy.
+static void
+test_varargs (const char *format, ...)
+{
+  va_list args;
+  va_start (args, format);
+  va_list args_copy;
+  va_copy (args_copy, args);
+
+  const char *str;
+  int number;
+  float fnumber;
+
+  while (*format)
+    {
+      switch (*format++)
+	{
+	case 's': // string
+	  str = va_arg (args_copy, const char *);
+	  break;
+	case 'd': // int
+	  number = va_arg (args_copy, int);
+	  break;
+	case 'f': // float
+	  fnumber = va_arg (args_copy, double);
+	  break;
+	default:
+	  break;
+	}
+    }
+  va_end (args_copy);
+  va_end (args);
+}
+
+int
+main ()
+{
+
+  // Check bool.
+  _Bool success = false;
+
+  // Check restrict.
+  if (test_restrict ("String literal") == 0)
+    success = true;
+  char *restrict newvar = "Another string";
+
+  // Check varargs.
+  test_varargs ("s, d' f .", "string", 65, 34.234);
+  test_varargs_macros ();
+
+  // Check flexible array members.
+  struct incomplete_array *ia =
+    malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
+  ia->datasize = 10;
+  for (int i = 0; i < ia->datasize; ++i)
+    ia->data[i] = i * 1.234;
+
+  // Check named initializers.
+  struct named_init ni = {
+    .number = 34,
+    .name = L"Test wide string",
+    .average = 543.34343,
+  };
+
+  ni.number = 58;
+
+  int dynamic_array[ni.number];
+  dynamic_array[ni.number - 1] = 543;
+
+  // work around unused variable warnings
+  return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
+	  || dynamic_array[ni.number - 1] != 543);
+
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -xc99=all -qlanglvl=extc99
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c99=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c99" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c99" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c99"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5
+$as_echo "$ac_cv_prog_cc_c99" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c99" != xno; then :
+  ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+  ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89
+else
+  ac_cv_prog_cc_stdc=no
+fi
+
+fi
+ ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO Standard C" >&5
+$as_echo_n "checking for $CC option to accept ISO Standard C... " >&6; }
+  if ${ac_cv_prog_cc_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+fi
+
+  case $ac_cv_prog_cc_stdc in #(
+  no) :
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;; #(
+  '') :
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;; #(
+  *) :
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_stdc" >&5
+$as_echo "$ac_cv_prog_cc_stdc" >&6; } ;;
+esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+
+# Check if LD supports linker scripts,
+# and define automake conditional HAVE_LD_VERSION_SCRIPT if so.
+# Check whether --enable-ld-version-script was given.
+if test "${enable_ld_version_script+set}" = set; then :
+  enableval=$enable_ld_version_script; have_ld_version_script=$enableval
+fi
+
+if test -z "$have_ld_version_script"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if LD -Wl,--version-script works" >&5
+$as_echo_n "checking if LD -Wl,--version-script works... " >&6; }
+  save_LDFLAGS="$LDFLAGS"
+  LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map"
+  cat > conftest.map <<EOF
+VERS_1 {
+        global: sym;
+};
+
+VERS_2 {
+        global: sym;
+} VERS_1;
+EOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  have_ld_version_script=yes
+else
+  have_ld_version_script=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  rm -f conftest.map
+  LDFLAGS="$save_LDFLAGS"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_ld_version_script" >&5
+$as_echo "$have_ld_version_script" >&6; }
+fi
+ if test "$have_ld_version_script" = "yes"; then
+  HAVE_LD_VERSION_SCRIPT_TRUE=
+  HAVE_LD_VERSION_SCRIPT_FALSE='#'
+else
+  HAVE_LD_VERSION_SCRIPT_TRUE='#'
+  HAVE_LD_VERSION_SCRIPT_FALSE=
+fi
+
+
+# See if compiler supports prototypes.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for function prototypes" >&5
+$as_echo_n "checking for function prototypes... " >&6; }
+if ${ijg_cv_have_prototypes+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int testfunction (int arg1, int * arg2); /* check prototypes */
+struct methods_struct {		/* check method-pointer declarations */
+  int (*error_exit) (char *msgtext);
+  int (*trace_message) (char *msgtext);
+  int (*another_method) (void);
+};
+int testfunction (int arg1, int * arg2) /* check definitions */
+{ return arg2[arg1]; }
+int test2function (void)	/* check void arg list */
+{ return 0; }
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ijg_cv_have_prototypes=yes
+else
+  ijg_cv_have_prototypes=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_cv_have_prototypes" >&5
+$as_echo "$ijg_cv_have_prototypes" >&6; }
+if test $ijg_cv_have_prototypes = yes; then
+
+$as_echo "#define HAVE_PROTOTYPES 1" >>confdefs.h
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Your compiler does not seem to know about function prototypes.
+    Perhaps it needs a special switch to enable ANSI C mode.
+    If so, we recommend running configure like this:
+       ./configure  CC='cc -switch'
+    where -switch is the proper switch." >&5
+$as_echo "$as_me: WARNING: Your compiler does not seem to know about function prototypes.
+    Perhaps it needs a special switch to enable ANSI C mode.
+    If so, we recommend running configure like this:
+       ./configure  CC='cc -switch'
+    where -switch is the proper switch." >&2;}
+fi
+
+# Check header files
+for ac_header in stddef.h stdlib.h locale.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+ac_fn_c_check_header_mongrel "$LINENO" "string.h" "ac_cv_header_string_h" "$ac_includes_default"
+if test "x$ac_cv_header_string_h" = xyes; then :
+
+else
+
+$as_echo "#define NEED_BSD_STRINGS 1" >>confdefs.h
+
+fi
+
+
+
+# See whether type size_t is defined in any ANSI-standard places;
+# if not, perhaps it is defined in <sys/types.h>.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for size_t" >&5
+$as_echo_n "checking for size_t... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef HAVE_STDDEF_H
+#include <stddef.h>
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
+#ifdef NEED_BSD_STRINGS
+#include <strings.h>
+#else
+#include <string.h>
+#endif
+typedef size_t my_size_t;
+
+int
+main ()
+{
+ my_size_t foovar;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ijg_size_t_ok=yes
+else
+  ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_size_t_ok" >&5
+$as_echo "$ijg_size_t_ok" >&6; }
+if test "$ijg_size_t_ok" != yes; then
+  ac_fn_c_check_header_mongrel "$LINENO" "sys/types.h" "ac_cv_header_sys_types_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_types_h" = xyes; then :
+
+$as_echo "#define NEED_SYS_TYPES_H 1" >>confdefs.h
+
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "size_t" >/dev/null 2>&1; then :
+  ijg_size_t_ok="size_t is in sys/types.h"
+else
+  ijg_size_t_ok=no
+fi
+rm -f conftest*
+
+else
+  ijg_size_t_ok=no
+fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_size_t_ok" >&5
+$as_echo "$ijg_size_t_ok" >&6; }
+  if test "$ijg_size_t_ok" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Type size_t is not defined in any of the usual places.
+      Try putting '\"typedef unsigned int size_t;\"' in jconfig.h." >&5
+$as_echo "$as_me: WARNING: Type size_t is not defined in any of the usual places.
+      Try putting '\"typedef unsigned int size_t;\"' in jconfig.h." >&2;}
+  fi
+fi
+
+# Check compiler characteristics
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type unsigned char" >&5
+$as_echo_n "checking for type unsigned char... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+ unsigned char un_char;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define HAVE_UNSIGNED_CHAR 1" >>confdefs.h
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type unsigned short" >&5
+$as_echo_n "checking for type unsigned short... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+ unsigned short un_short;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define HAVE_UNSIGNED_SHORT 1" >>confdefs.h
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type void" >&5
+$as_echo_n "checking for type void... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Caution: a C++ compiler will insist on valid prototypes */
+typedef void * void_ptr;	/* check void * */
+#ifdef HAVE_PROTOTYPES		/* check ptr to function returning void */
+typedef void (*void_func) (int a, int b);
+#else
+typedef void (*void_func) ();
+#endif
+
+#ifdef HAVE_PROTOTYPES		/* check void function result */
+void test3function (void_ptr arg1, void_func arg2)
+#else
+void test3function (arg1, arg2)
+     void_ptr arg1;
+     void_func arg2;
+#endif
+{
+  char * locptr = (char *) arg1; /* check casting to and from void * */
+  arg1 = (void *) locptr;
+  (*arg2) (1, 2);		/* check call of fcn returning void */
+}
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+$as_echo "#define void char" >>confdefs.h
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
+if ${ac_cv_c_const+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+  /* Ultrix mips cc rejects this.  */
+  typedef int charset[2];
+  const charset cs;
+  /* SunOS 4.1.1 cc rejects this.  */
+  char const *const *pcpcc;
+  char **ppc;
+  /* NEC SVR4.0.2 mips cc rejects this.  */
+  struct point {int x, y;};
+  static struct point const zero = {0,0};
+  /* AIX XL C 1.02.0.0 rejects this.
+     It does not let you subtract one const X* pointer from another in
+     an arm of an if-expression whose if-part is not a constant
+     expression */
+  const char *g = "string";
+  pcpcc = &g + (g ? g-g : 0);
+  /* HPUX 7.0 cc rejects these. */
+  ++pcpcc;
+  ppc = (char**) pcpcc;
+  pcpcc = (char const *const *) ppc;
+  { /* SCO 3.2v4 cc rejects this.  */
+    char *t;
+    char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+    *t++ = 0;
+    if (s) return 0;
+  }
+  { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+    int x[] = {25, 17};
+    const int *foo = &x[0];
+    ++foo;
+  }
+  { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+    typedef const int *iptr;
+    iptr p = 0;
+    ++p;
+  }
+  { /* AIX XL C 1.02.0.0 rejects this saying
+       "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+    struct s { int j; const int *ap[3]; };
+    struct s *b; b->j = 5;
+  }
+  { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+    const int foo = 10;
+    if (!foo) return 0;
+  }
+  return !cs[0] && !zero.x;
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_const=yes
+else
+  ac_cv_c_const=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
+$as_echo "$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+$as_echo "#define const /**/" >>confdefs.h
+
+fi
+
+
+# Check for non-broken inline under various spellings
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
+$as_echo_n "checking for inline... " >&6; }
+ijg_cv_inline=""
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+} __inline__ int foo() { return 0; }
+int bar() { return foo();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ijg_cv_inline="__inline__"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+} __inline int foo() { return 0; }
+int bar() { return foo();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ijg_cv_inline="__inline"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+} inline int foo() { return 0; }
+int bar() { return foo();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ijg_cv_inline="inline"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ijg_cv_inline" >&5
+$as_echo "$ijg_cv_inline" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define INLINE $ijg_cv_inline
+_ACEOF
+
+
+# We cannot check for bogus warnings, but at least we can check for errors
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for broken incomplete types" >&5
+$as_echo_n "checking for broken incomplete types... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+ typedef struct undefined_structure * undef_struct_ptr;
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: broken" >&5
+$as_echo "broken" >&6; }
+
+$as_echo "#define INCOMPLETE_TYPES_BROKEN 1" >>confdefs.h
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+# Test whether global names are unique to at least 15 chars
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for short external names" >&5
+$as_echo_n "checking for short external names... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int possibly_duplicate_function () { return 0; }
+int possibly_dupli_function () { return 1; }
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: short" >&5
+$as_echo "short" >&6; }
+
+$as_echo "#define NEED_SHORT_EXTERNAL_NAMES 1" >>confdefs.h
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+# Run-time checks
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if char is signed" >&5
+$as_echo_n "checking to see if char is signed... " >&6; }
+if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Assuming that char is signed on target machine.
+    If it is unsigned, this will be a little bit inefficient." >&5
+$as_echo "$as_me: WARNING: Assuming that char is signed on target machine.
+    If it is unsigned, this will be a little bit inefficient." >&2;}
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef HAVE_PROTOTYPES
+int is_char_signed (int arg)
+#else
+int is_char_signed (arg)
+     int arg;
+#endif
+{
+  if (arg == 189) {		/* expected result for unsigned char */
+    return 0;			/* type char is unsigned */
+  }
+  else if (arg != -67) {	/* expected result for signed char */
+    printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
+    printf("I fear the JPEG software will not work at all.\n\n");
+  }
+  return 1;			/* assume char is signed otherwise */
+}
+char signed_char_check = (char) (-67);
+int main() {
+  exit(is_char_signed((int) signed_char_check));
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+$as_echo "#define CHAR_IS_UNSIGNED 1" >>confdefs.h
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if right shift is signed" >&5
+$as_echo_n "checking to see if right shift is signed... " >&6; }
+if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: Assuming that right shift is signed on target machine." >&5
+$as_echo "Assuming that right shift is signed on target machine." >&6; }
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef HAVE_PROTOTYPES
+int is_shifting_signed (long arg)
+#else
+int is_shifting_signed (arg)
+     long arg;
+#endif
+/* See whether right-shift on a long is signed or not. */
+{
+  long res = arg >> 4;
+
+  if (res == -0x7F7E80CL) {	/* expected result for signed shift */
+    return 1;			/* right shift is signed */
+  }
+  /* see if unsigned-shift hack will fix it. */
+  /* we can't just test exact value since it depends on width of long... */
+  res |= (~0L) << (32-4);
+  if (res == -0x7F7E80CL) {	/* expected result now? */
+    return 0;			/* right shift is unsigned */
+  }
+  printf("Right shift isn't acting as I expect it to.\n");
+  printf("I fear the JPEG software will not work at all.\n\n");
+  return 0;			/* try it with unsigned anyway */
+}
+int main() {
+  exit(is_shifting_signed(-0x7F7E80B1L));
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+$as_echo "#define RIGHT_SHIFT_IS_UNSIGNED 1" >>confdefs.h
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking to see if fopen accepts b spec" >&5
+$as_echo_n "checking to see if fopen accepts b spec... " >&6; }
+if test "$cross_compiling" = yes; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: Assuming that it does." >&5
+$as_echo "Assuming that it does." >&6; }
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdio.h>
+int main() {
+  if (fopen("conftestdata", "wb") != NULL)
+    exit(0);
+  exit(1);
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+$as_echo "#define DONT_USE_B_MODE 1" >>confdefs.h
+
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+
+# Configure libtool
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AS="${ac_tool_prefix}as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+  ac_ct_AS=$AS
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AS"; then
+  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AS="as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AS" = x; then
+    AS="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
+else
+  AS="$ac_cv_prog_AS"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+  ;;
+esac
+
+test -z "$AS" && AS=as
+
+
+
+
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+
+
+
+        enable_dlopen=no
+
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+# Select memory manager depending on user input.
+# If no "-enable-maxmem", use jmemnobs
+MEMORYMGR='jmemnobs'
+MAXMEM="no"
+# Check whether --enable-maxmem was given.
+if test "${enable_maxmem+set}" = set; then :
+  enableval=$enable_maxmem; MAXMEM="$enableval"
+fi
+
+if test "x$MAXMEM" = xyes; then
+  MAXMEM=1
+fi
+if test "x$MAXMEM" != xno; then
+  if test -n "`echo $MAXMEM | sed 's/[0-9]//g'`"; then
+    as_fn_error $? "non-numeric argument to --enable-maxmem" "$LINENO" 5
+  fi
+  DEFAULTMAXMEM=`expr $MAXMEM \* 1048576`
+
+cat >>confdefs.h <<_ACEOF
+#define DEFAULT_MAX_MEM ${DEFAULTMAXMEM}
+_ACEOF
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 'tmpfile()'" >&5
+$as_echo_n "checking for 'tmpfile()'... " >&6; }
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+ FILE * tfile = tmpfile();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    MEMORYMGR='jmemansi'
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+        MEMORYMGR='jmemname'
+
+    # Test for the need to remove temporary files using a signal handler
+    # (for cjpeg/djpeg)
+
+$as_echo "#define NEED_SIGNAL_CATCHER 1" >>confdefs.h
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 'mktemp()'" >&5
+$as_echo_n "checking for 'mktemp()'... " >&6; }
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+ char fname[80]; mktemp(fname);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+$as_echo "#define NO_MKTEMP 1" >>confdefs.h
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+
+
+# Extract the library version IDs from jpeglib.h.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libjpeg version number" >&5
+$as_echo_n "checking libjpeg version number... " >&6; }
+major=`sed -ne 's/^#define JPEG_LIB_VERSION_MAJOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h`
+minor=`sed -ne 's/^#define JPEG_LIB_VERSION_MINOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h`
+JPEG_LIB_VERSION=`expr $major + $minor`:0:$minor
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $JPEG_LIB_VERSION" >&5
+$as_echo "$JPEG_LIB_VERSION" >&6; }
+
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+  as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_LD_VERSION_SCRIPT_TRUE}" && test -z "${HAVE_LD_VERSION_SCRIPT_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_LD_VERSION_SCRIPT\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by libjpeg $as_me 8.4.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+libjpeg config.status 8.4.0
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in AS \
+DLLTOOL \
+OBJDUMP \
+SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "jconfig.h") CONFIG_HEADERS="$CONFIG_HEADERS jconfig.h:jconfig.cfg" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Assembler program.
+AS=$lt_AS
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Object dumper program.
+OBJDUMP=$lt_OBJDUMP
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/jpeg-8d/configure.ac b/jpeg-8d/configure.ac
new file mode 100644
index 0000000..12293b0
--- /dev/null
+++ b/jpeg-8d/configure.ac
@@ -0,0 +1,356 @@
+# IJG auto-configuration source file.
+# Process this file with autoconf to produce a configure script.
+
+#
+# Configure script for IJG libjpeg
+#
+
+AC_INIT([libjpeg], [8.4.0])
+
+# Directory where autotools helper scripts lives.
+AC_CONFIG_AUX_DIR([.])
+
+# Generate configuration headers.
+AC_CONFIG_HEADERS([jconfig.h:jconfig.cfg])
+
+# Hack: disable autoheader so that it doesn't overwrite our cfg template.
+AUTOHEADER="echo autoheader ignored"
+
+# Check system type
+AC_CANONICAL_TARGET
+
+# Initialize Automake
+# Don't require all the GNU mandated files
+AM_INIT_AUTOMAKE([-Wall -Werror -Wno-obsolete ansi2knr no-dist foreign])
+
+# Make --enable-silent-rules the default.
+# To get verbose build output you may configure
+# with --disable-silent-rules or use "make V=1".
+AM_SILENT_RULES([yes])
+
+# This is required when using the de-ANSI-fication feature.
+AM_C_PROTOTYPES
+
+# Add configure option --enable-maintainer-mode which enables
+# dependency checking and generation useful to package maintainers.
+# This is made an option to avoid confusing end users.
+AM_MAINTAINER_MODE
+
+# Check for programs
+AC_PROG_CC
+AC_PROG_CC_STDC
+AC_PROG_CPP
+AC_PROG_INSTALL
+AC_PROG_MAKE_SET
+AC_PROG_LN_S
+
+# Check if LD supports linker scripts,
+# and define automake conditional HAVE_LD_VERSION_SCRIPT if so.
+AC_ARG_ENABLE([ld-version-script],
+  AS_HELP_STRING([--enable-ld-version-script],
+    [enable linker version script (default is enabled when possible)]),
+    [have_ld_version_script=$enableval], [])
+if test -z "$have_ld_version_script"; then
+  AC_MSG_CHECKING([if LD -Wl,--version-script works])
+  save_LDFLAGS="$LDFLAGS"
+  LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map"
+  cat > conftest.map <<EOF
+VERS_1 {
+        global: sym;
+};
+
+VERS_2 {
+        global: sym;
+} VERS_1;
+EOF
+  AC_LINK_IFELSE([AC_LANG_PROGRAM([], [])],
+                 [have_ld_version_script=yes], [have_ld_version_script=no])
+  rm -f conftest.map
+  LDFLAGS="$save_LDFLAGS"
+  AC_MSG_RESULT($have_ld_version_script)
+fi
+AM_CONDITIONAL(HAVE_LD_VERSION_SCRIPT, test "$have_ld_version_script" = "yes")
+
+# See if compiler supports prototypes.
+AC_MSG_CHECKING([for function prototypes])
+AC_CACHE_VAL([ijg_cv_have_prototypes],
+[AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
+int testfunction (int arg1, int * arg2); /* check prototypes */
+struct methods_struct {		/* check method-pointer declarations */
+  int (*error_exit) (char *msgtext);
+  int (*trace_message) (char *msgtext);
+  int (*another_method) (void);
+};
+int testfunction (int arg1, int * arg2) /* check definitions */
+{ return arg2[arg1]; }
+int test2function (void)	/* check void arg list */
+{ return 0; }
+]])],
+          [ijg_cv_have_prototypes=yes],
+          [ijg_cv_have_prototypes=no])])
+AC_MSG_RESULT([$ijg_cv_have_prototypes])
+if test $ijg_cv_have_prototypes = yes; then
+  AC_DEFINE([HAVE_PROTOTYPES],[1],[Compiler supports function prototypes.])
+else
+  AC_MSG_WARN([Your compiler does not seem to know about function prototypes.
+    Perhaps it needs a special switch to enable ANSI C mode.
+    If so, we recommend running configure like this:
+       ./configure  CC='cc -switch'
+    where -switch is the proper switch.])
+fi
+
+# Check header files
+AC_CHECK_HEADERS([stddef.h stdlib.h locale.h])
+AC_CHECK_HEADER([string.h], [],
+ [AC_DEFINE([NEED_BSD_STRINGS], [1],
+            [Compiler has <strings.h> rather than standard <string.h>.])])
+
+# See whether type size_t is defined in any ANSI-standard places;
+# if not, perhaps it is defined in <sys/types.h>.
+AC_MSG_CHECKING([for size_t])
+AC_TRY_COMPILE([
+#ifdef HAVE_STDDEF_H
+#include <stddef.h>
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
+#ifdef NEED_BSD_STRINGS
+#include <strings.h>
+#else
+#include <string.h>
+#endif
+typedef size_t my_size_t;
+],
+      [ my_size_t foovar; ],
+      [ijg_size_t_ok=yes],
+      [ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h"])
+AC_MSG_RESULT([$ijg_size_t_ok])
+if test "$ijg_size_t_ok" != yes; then
+  AC_CHECK_HEADER([sys/types.h],
+     [AC_DEFINE([NEED_SYS_TYPES_H], [1],
+                [Need to include <sys/types.h> in order to obtain size_t.])
+      AC_EGREP_CPP([size_t], [#include <sys/types.h>],
+                   [ijg_size_t_ok="size_t is in sys/types.h"],
+                   [ijg_size_t_ok=no])],
+     [ijg_size_t_ok=no])
+  AC_MSG_RESULT([$ijg_size_t_ok])
+  if test "$ijg_size_t_ok" = no; then
+    AC_MSG_WARN([Type size_t is not defined in any of the usual places.
+      Try putting '"typedef unsigned int size_t;"' in jconfig.h.])
+  fi
+fi
+
+# Check compiler characteristics
+AC_MSG_CHECKING([for type unsigned char])
+AC_TRY_COMPILE([], [ unsigned char un_char; ],
+ [AC_MSG_RESULT(yes)
+  AC_DEFINE([HAVE_UNSIGNED_CHAR], [1],
+            [Compiler supports 'unsigned char'.])],
+ [AC_MSG_RESULT(no)])
+
+AC_MSG_CHECKING([for type unsigned short])
+AC_TRY_COMPILE([], [ unsigned short un_short; ],
+  [AC_MSG_RESULT(yes)
+   AC_DEFINE([HAVE_UNSIGNED_SHORT], [1],
+             [Compiler supports 'unsigned short'.])],
+  [AC_MSG_RESULT(no)])
+
+AC_MSG_CHECKING([for type void])
+AC_TRY_COMPILE([
+/* Caution: a C++ compiler will insist on valid prototypes */
+typedef void * void_ptr;	/* check void * */
+#ifdef HAVE_PROTOTYPES		/* check ptr to function returning void */
+typedef void (*void_func) (int a, int b);
+#else
+typedef void (*void_func) ();
+#endif
+
+#ifdef HAVE_PROTOTYPES		/* check void function result */
+void test3function (void_ptr arg1, void_func arg2)
+#else
+void test3function (arg1, arg2)
+     void_ptr arg1;
+     void_func arg2;
+#endif
+{
+  char * locptr = (char *) arg1; /* check casting to and from void * */
+  arg1 = (void *) locptr;
+  (*arg2) (1, 2);		/* check call of fcn returning void */
+}
+], [ ],
+        [AC_MSG_RESULT(yes)],
+        [AC_MSG_RESULT(no)
+         AC_DEFINE([void], [char],
+                   [Define 'void' as 'char' for archaic compilers
+                    that don't understand it.])])
+AC_C_CONST
+
+# Check for non-broken inline under various spellings
+AC_MSG_CHECKING([for inline])
+ijg_cv_inline=""
+AC_TRY_COMPILE([], [} __inline__ int foo() { return 0; }
+int bar() { return foo();], ijg_cv_inline="__inline__",
+[AC_TRY_COMPILE(, [} __inline int foo() { return 0; }
+int bar() { return foo();], ijg_cv_inline="__inline",
+[AC_TRY_COMPILE(, [} inline int foo() { return 0; }
+int bar() { return foo();], ijg_cv_inline="inline")])])
+AC_MSG_RESULT($ijg_cv_inline)
+AC_DEFINE_UNQUOTED([INLINE], [$ijg_cv_inline],
+                   [How to obtain function inlining.])
+
+# We cannot check for bogus warnings, but at least we can check for errors
+AC_MSG_CHECKING([for broken incomplete types])
+AC_TRY_COMPILE([ typedef struct undefined_structure * undef_struct_ptr; ],
+               [],
+               [AC_MSG_RESULT(ok)],
+               [AC_MSG_RESULT(broken)
+                AC_DEFINE([INCOMPLETE_TYPES_BROKEN], [1],
+                          [Compiler does not support pointers to unspecified
+                           structures.])])
+
+# Test whether global names are unique to at least 15 chars
+AC_MSG_CHECKING([for short external names])
+AC_TRY_LINK([
+int possibly_duplicate_function () { return 0; }
+int possibly_dupli_function () { return 1; }
+], [],
+            [AC_MSG_RESULT(ok)],
+            [AC_MSG_RESULT(short)
+             AC_DEFINE([NEED_SHORT_EXTERNAL_NAMES], [1],
+                       [Linker requires that global names be unique in
+                        first 15 characters.])])
+
+# Run-time checks
+AC_MSG_CHECKING([to see if char is signed])
+AC_TRY_RUN([
+#ifdef HAVE_PROTOTYPES
+int is_char_signed (int arg)
+#else
+int is_char_signed (arg)
+     int arg;
+#endif
+{
+  if (arg == 189) {		/* expected result for unsigned char */
+    return 0;			/* type char is unsigned */
+  }
+  else if (arg != -67) {	/* expected result for signed char */
+    printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
+    printf("I fear the JPEG software will not work at all.\n\n");
+  }
+  return 1;			/* assume char is signed otherwise */
+}
+char signed_char_check = (char) (-67);
+int main() {
+  exit(is_char_signed((int) signed_char_check));
+}], [AC_MSG_RESULT(no)
+     AC_DEFINE([CHAR_IS_UNSIGNED], [1],
+               [Characters are unsigned])],
+               [AC_MSG_RESULT(yes)],
+[AC_MSG_WARN([Assuming that char is signed on target machine.
+    If it is unsigned, this will be a little bit inefficient.])
+])
+
+AC_MSG_CHECKING([to see if right shift is signed])
+AC_TRY_RUN([
+#ifdef HAVE_PROTOTYPES
+int is_shifting_signed (long arg)
+#else
+int is_shifting_signed (arg)
+     long arg;
+#endif
+/* See whether right-shift on a long is signed or not. */
+{
+  long res = arg >> 4;
+
+  if (res == -0x7F7E80CL) {	/* expected result for signed shift */
+    return 1;			/* right shift is signed */
+  }
+  /* see if unsigned-shift hack will fix it. */
+  /* we can't just test exact value since it depends on width of long... */
+  res |= (~0L) << (32-4);
+  if (res == -0x7F7E80CL) {	/* expected result now? */
+    return 0;			/* right shift is unsigned */
+  }
+  printf("Right shift isn't acting as I expect it to.\n");
+  printf("I fear the JPEG software will not work at all.\n\n");
+  return 0;			/* try it with unsigned anyway */
+}
+int main() {
+  exit(is_shifting_signed(-0x7F7E80B1L));
+}],
+      [AC_MSG_RESULT(no)
+       AC_DEFINE([RIGHT_SHIFT_IS_UNSIGNED], [1],
+                 [Broken compiler shifts signed values as an unsigned shift.])],
+       [AC_MSG_RESULT(yes)],
+       [AC_MSG_RESULT(Assuming that right shift is signed on target machine.)])
+
+AC_MSG_CHECKING([to see if fopen accepts b spec])
+AC_TRY_RUN([
+#include <stdio.h>
+int main() {
+  if (fopen("conftestdata", "wb") != NULL)
+    exit(0);
+  exit(1);
+}],
+          [AC_MSG_RESULT(yes)],
+          [AC_MSG_RESULT(no)
+           AC_DEFINE([DONT_USE_B_MODE], [1],
+                     [Don't open files in binary mode.])],
+          [AC_MSG_RESULT(Assuming that it does.)])
+
+# Configure libtool
+AC_LIBTOOL_WIN32_DLL
+AC_PROG_LIBTOOL
+
+# Select memory manager depending on user input.
+# If no "-enable-maxmem", use jmemnobs
+MEMORYMGR='jmemnobs'
+MAXMEM="no"
+AC_ARG_ENABLE([maxmem],
+[  --enable-maxmem[=N]     enable use of temp files, set max mem usage to N MB],
+[MAXMEM="$enableval"])
+dnl [# support --with-maxmem for backwards compatibility with IJG V5.]
+dnl AC_ARG_WITH(maxmem, , MAXMEM="$withval")
+if test "x$MAXMEM" = xyes; then
+  MAXMEM=1
+fi
+if test "x$MAXMEM" != xno; then
+  if test -n "`echo $MAXMEM | sed 's/[[0-9]]//g'`"; then
+    AC_MSG_ERROR(non-numeric argument to --enable-maxmem)
+  fi
+  DEFAULTMAXMEM=`expr $MAXMEM \* 1048576`
+  AC_DEFINE_UNQUOTED([DEFAULT_MAX_MEM], [${DEFAULTMAXMEM}],
+                     [Maximum data space library will allocate.])
+  AC_MSG_CHECKING([for 'tmpfile()'])
+  AC_TRY_LINK([#include <stdio.h>], [ FILE * tfile = tmpfile(); ],
+    [AC_MSG_RESULT(yes)
+    MEMORYMGR='jmemansi'],
+    [AC_MSG_RESULT(no)
+    dnl if tmpfile is not present, must use jmemname.
+    MEMORYMGR='jmemname'
+
+    # Test for the need to remove temporary files using a signal handler
+    # (for cjpeg/djpeg)
+    AC_DEFINE([NEED_SIGNAL_CATCHER], [1],
+              [Need signal handler to clean up temporary files.])
+    AC_MSG_CHECKING([for 'mktemp()'])
+    AC_TRY_LINK([], [ char fname[80]; mktemp(fname); ],
+                [AC_MSG_RESULT(yes)],
+                [AC_MSG_RESULT(no)
+                 AC_DEFINE([NO_MKTEMP], [1],
+                           [The mktemp() function is not available.])])])
+fi
+AC_SUBST([MEMORYMGR])
+
+# Extract the library version IDs from jpeglib.h.
+AC_MSG_CHECKING([libjpeg version number])
+[major=`sed -ne 's/^#define JPEG_LIB_VERSION_MAJOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h`
+minor=`sed -ne 's/^#define JPEG_LIB_VERSION_MINOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h`]
+AC_SUBST([JPEG_LIB_VERSION],
+         [`expr $major + $minor`:0:$minor])
+AC_MSG_RESULT([$JPEG_LIB_VERSION])
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/jpeg-8d/depcomp b/jpeg-8d/depcomp
new file mode 100644
index 0000000..bd0ac08
--- /dev/null
+++ b/jpeg-8d/depcomp
@@ -0,0 +1,688 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2011-12-04.11; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
+# 2011 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputting dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+   # This is just like msvisualcpp but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u='sed s,\\\\,/,g'
+   depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+   # This is just like msvc7 but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u='sed s,\\\\,/,g'
+   depmode=msvc7
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+      | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> "$depfile"
+    echo >> "$depfile"
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${
+	       s/^ *//
+	       s/ \\*$//
+	       s/$/:/
+	       p
+	     }' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mechanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test "$stat" = 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/	\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/	/
+  G
+  p
+}' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/jpeg-8d/djpeg.1 b/jpeg-8d/djpeg.1
new file mode 100644
index 0000000..f3722d1
--- /dev/null
+++ b/jpeg-8d/djpeg.1
@@ -0,0 +1,252 @@
+.TH DJPEG 1 "3 October 2009"
+.SH NAME
+djpeg \- decompress a JPEG file to an image file
+.SH SYNOPSIS
+.B djpeg
+[
+.I options
+]
+[
+.I filename
+]
+.LP
+.SH DESCRIPTION
+.LP
+.B djpeg
+decompresses the named JPEG file, or the standard input if no file is named,
+and produces an image file on the standard output.  PBMPLUS (PPM/PGM), BMP,
+GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected.
+(RLE is supported only if the URT library is available.)
+.SH OPTIONS
+All switch names may be abbreviated; for example,
+.B \-grayscale
+may be written
+.B \-gray
+or
+.BR \-gr .
+Most of the "basic" switches can be abbreviated to as little as one letter.
+Upper and lower case are equivalent (thus
+.B \-BMP
+is the same as
+.BR \-bmp ).
+British spellings are also accepted (e.g.,
+.BR \-greyscale ),
+though for brevity these are not mentioned below.
+.PP
+The basic switches are:
+.TP
+.BI \-colors " N"
+Reduce image to at most N colors.  This reduces the number of colors used in
+the output image, so that it can be displayed on a colormapped display or
+stored in a colormapped file format.  For example, if you have an 8-bit
+display, you'd need to reduce to 256 or fewer colors.
+.TP
+.BI \-quantize " N"
+Same as
+.BR \-colors .
+.B \-colors
+is the recommended name,
+.B \-quantize
+is provided only for backwards compatibility.
+.TP
+.B \-fast
+Select recommended processing options for fast, low quality output.  (The
+default options are chosen for highest quality output.)  Currently, this is
+equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR.
+.TP
+.B \-grayscale
+Force gray-scale output even if JPEG file is color.  Useful for viewing on
+monochrome displays; also,
+.B djpeg
+runs noticeably faster in this mode.
+.TP
+.BI \-scale " M/N"
+Scale the output image by a factor M/N.  Currently supported scale factors are
+M/N with all M from 1 to 16, where N is the source DCT size, which is 8 for
+baseline JPEG.  If the /N part is omitted, then M specifies the DCT scaled
+size to be applied on the given input.  For baseline JPEG this is equivalent
+to M/8 scaling, since the source DCT size for baseline JPEG is 8.
+Scaling is handy if the image is larger than your screen; also,
+.B djpeg
+runs much faster when scaling down the output.
+.TP
+.B \-bmp
+Select BMP output format (Windows flavor).  8-bit colormapped format is
+emitted if
+.B \-colors
+or
+.B \-grayscale
+is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color
+format is emitted.
+.TP
+.B \-gif
+Select GIF output format.  Since GIF does not support more than 256 colors,
+.B \-colors 256
+is assumed (unless you specify a smaller number of colors).
+.TP
+.B \-os2
+Select BMP output format (OS/2 1.x flavor).  8-bit colormapped format is
+emitted if
+.B \-colors
+or
+.B \-grayscale
+is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color
+format is emitted.
+.TP
+.B \-pnm
+Select PBMPLUS (PPM/PGM) output format (this is the default format).
+PGM is emitted if the JPEG file is gray-scale or if
+.B \-grayscale
+is specified; otherwise PPM is emitted.
+.TP
+.B \-rle
+Select RLE output format.  (Requires URT library.)
+.TP
+.B \-targa
+Select Targa output format.  Gray-scale format is emitted if the JPEG file is
+gray-scale or if
+.B \-grayscale
+is specified; otherwise, colormapped format is emitted if
+.B \-colors
+is specified; otherwise, 24-bit full-color format is emitted.
+.PP
+Switches for advanced users:
+.TP
+.B \-dct int
+Use integer DCT method (default).
+.TP
+.B \-dct fast
+Use fast integer DCT (less accurate).
+.TP
+.B \-dct float
+Use floating-point DCT method.
+The float method is very slightly more accurate than the int method, but is
+much slower unless your machine has very fast floating-point hardware.  Also
+note that results of the floating-point method may vary slightly across
+machines, while the integer methods should give the same results everywhere.
+The fast integer method is much less accurate than the other two.
+.TP
+.B \-dither fs
+Use Floyd-Steinberg dithering in color quantization.
+.TP
+.B \-dither ordered
+Use ordered dithering in color quantization.
+.TP
+.B \-dither none
+Do not use dithering in color quantization.
+By default, Floyd-Steinberg dithering is applied when quantizing colors; this
+is slow but usually produces the best results.  Ordered dither is a compromise
+between speed and quality; no dithering is fast but usually looks awful.  Note
+that these switches have no effect unless color quantization is being done.
+Ordered dither is only available in
+.B \-onepass
+mode.
+.TP
+.BI \-map " file"
+Quantize to the colors used in the specified image file.  This is useful for
+producing multiple files with identical color maps, or for forcing a
+predefined set of colors to be used.  The
+.I file
+must be a GIF or PPM file. This option overrides
+.B \-colors
+and
+.BR \-onepass .
+.TP
+.B \-nosmooth
+Don't use high-quality upsampling.
+.TP
+.B \-onepass
+Use one-pass instead of two-pass color quantization.  The one-pass method is
+faster and needs less memory, but it produces a lower-quality image.
+.B \-onepass
+is ignored unless you also say
+.B \-colors
+.IR N .
+Also, the one-pass method is always used for gray-scale output (the two-pass
+method is no improvement then).
+.TP
+.BI \-maxmemory " N"
+Set limit for amount of memory to use in processing large images.  Value is
+in thousands of bytes, or millions of bytes if "M" is attached to the
+number.  For example,
+.B \-max 4m
+selects 4000000 bytes.  If more space is needed, temporary files will be used.
+.TP
+.BI \-outfile " name"
+Send output image to the named file, not to standard output.
+.TP
+.B \-verbose
+Enable debug printout.  More
+.BR \-v 's
+give more output.  Also, version information is printed at startup.
+.TP
+.B \-debug
+Same as
+.BR \-verbose .
+.SH EXAMPLES
+.LP
+This example decompresses the JPEG file foo.jpg, quantizes it to
+256 colors, and saves the output in 8-bit BMP format in foo.bmp:
+.IP
+.B djpeg \-colors 256 \-bmp
+.I foo.jpg
+.B >
+.I foo.bmp
+.SH HINTS
+To get a quick preview of an image, use the
+.B \-grayscale
+and/or
+.B \-scale
+switches.
+.B \-grayscale \-scale 1/8
+is the fastest case.
+.PP
+Several options are available that trade off image quality to gain speed.
+.B \-fast
+turns on the recommended settings.
+.PP
+.B \-dct fast
+and/or
+.B \-nosmooth
+gain speed at a small sacrifice in quality.
+When producing a color-quantized image,
+.B \-onepass \-dither ordered
+is fast but much lower quality than the default behavior.
+.B \-dither none
+may give acceptable results in two-pass mode, but is seldom tolerable in
+one-pass mode.
+.PP
+If you are fortunate enough to have very fast floating point hardware,
+\fB\-dct float\fR may be even faster than \fB\-dct fast\fR.  But on most
+machines \fB\-dct float\fR is slower than \fB\-dct int\fR; in this case it is
+not worth using, because its theoretical accuracy advantage is too small to be
+significant in practice.
+.SH ENVIRONMENT
+.TP
+.B JPEGMEM
+If this environment variable is set, its value is the default memory limit.
+The value is specified as described for the
+.B \-maxmemory
+switch.
+.B JPEGMEM
+overrides the default value specified when the program was compiled, and
+itself is overridden by an explicit
+.BR \-maxmemory .
+.SH SEE ALSO
+.BR cjpeg (1),
+.BR jpegtran (1),
+.BR rdjpgcom (1),
+.BR wrjpgcom (1)
+.br
+.BR ppm (5),
+.BR pgm (5)
+.br
+Wallace, Gregory K.  "The JPEG Still Picture Compression Standard",
+Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
+.SH AUTHOR
+Independent JPEG Group
+.SH BUGS
+To avoid the Unisys LZW patent,
+.B djpeg
+produces uncompressed GIF files.  These are larger than they should be, but
+are readable by standard GIF decoders.
diff --git a/jpeg-8d/djpeg.c b/jpeg-8d/djpeg.c
new file mode 100644
index 0000000..bc544dc
--- /dev/null
+++ b/jpeg-8d/djpeg.c
@@ -0,0 +1,617 @@
+/*
+ * djpeg.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a command-line user interface for the JPEG decompressor.
+ * It should work on any system with Unix- or MS-DOS-style command lines.
+ *
+ * Two different command line styles are permitted, depending on the
+ * compile-time switch TWO_FILE_COMMANDLINE:
+ *	djpeg [options]  inputfile outputfile
+ *	djpeg [options]  [inputfile]
+ * In the second style, output is always to standard output, which you'd
+ * normally redirect to a file or pipe to some other program.  Input is
+ * either from a named file or from standard input (typically redirected).
+ * The second style is convenient on Unix but is unhelpful on systems that
+ * don't support pipes.  Also, you MUST use the first style if your system
+ * doesn't do binary I/O to stdin/stdout.
+ * To simplify script writing, the "-outfile" switch is provided.  The syntax
+ *	djpeg [options]  -outfile outputfile  inputfile
+ * works regardless of which command line style is used.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include "jversion.h"		/* for version message */
+
+#include <ctype.h>		/* to declare isprint() */
+
+#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
+#ifdef __MWERKS__
+#include <SIOUX.h>              /* Metrowerks needs this */
+#include <console.h>		/* ... and this */
+#endif
+#ifdef THINK_C
+#include <console.h>		/* Think declares it here */
+#endif
+#endif
+
+
+/* Create the add-on message string table. */
+
+#define JMESSAGE(code,string)	string ,
+
+static const char * const cdjpeg_message_table[] = {
+#include "cderror.h"
+  NULL
+};
+
+
+/*
+ * This list defines the known output image formats
+ * (not all of which need be supported by a given version).
+ * You can change the default output format by defining DEFAULT_FMT;
+ * indeed, you had better do so if you undefine PPM_SUPPORTED.
+ */
+
+typedef enum {
+	FMT_BMP,		/* BMP format (Windows flavor) */
+	FMT_GIF,		/* GIF format */
+	FMT_OS2,		/* BMP format (OS/2 flavor) */
+	FMT_PPM,		/* PPM/PGM (PBMPLUS formats) */
+	FMT_RLE,		/* RLE format */
+	FMT_TARGA,		/* Targa format */
+	FMT_TIFF		/* TIFF format */
+} IMAGE_FORMATS;
+
+#ifndef DEFAULT_FMT		/* so can override from CFLAGS in Makefile */
+#define DEFAULT_FMT	FMT_PPM
+#endif
+
+static IMAGE_FORMATS requested_fmt;
+
+
+/*
+ * Argument-parsing code.
+ * The switch parser is designed to be useful with DOS-style command line
+ * syntax, ie, intermixed switches and file names, where only the switches
+ * to the left of a given file name affect processing of that file.
+ * The main program in this file doesn't actually use this capability...
+ */
+
+
+static const char * progname;	/* program name for error messages */
+static char * outfilename;	/* for -outfile switch */
+
+
+LOCAL(void)
+usage (void)
+/* complain about bad command line */
+{
+  fprintf(stderr, "usage: %s [switches] ", progname);
+#ifdef TWO_FILE_COMMANDLINE
+  fprintf(stderr, "inputfile outputfile\n");
+#else
+  fprintf(stderr, "[inputfile]\n");
+#endif
+
+  fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -colors N      Reduce image to no more than N colors\n");
+  fprintf(stderr, "  -fast          Fast, low-quality processing\n");
+  fprintf(stderr, "  -grayscale     Force grayscale output\n");
+#ifdef IDCT_SCALING_SUPPORTED
+  fprintf(stderr, "  -scale M/N     Scale output image by fraction M/N, eg, 1/8\n");
+#endif
+#ifdef BMP_SUPPORTED
+  fprintf(stderr, "  -bmp           Select BMP output format (Windows style)%s\n",
+	  (DEFAULT_FMT == FMT_BMP ? " (default)" : ""));
+#endif
+#ifdef GIF_SUPPORTED
+  fprintf(stderr, "  -gif           Select GIF output format%s\n",
+	  (DEFAULT_FMT == FMT_GIF ? " (default)" : ""));
+#endif
+#ifdef BMP_SUPPORTED
+  fprintf(stderr, "  -os2           Select BMP output format (OS/2 style)%s\n",
+	  (DEFAULT_FMT == FMT_OS2 ? " (default)" : ""));
+#endif
+#ifdef PPM_SUPPORTED
+  fprintf(stderr, "  -pnm           Select PBMPLUS (PPM/PGM) output format%s\n",
+	  (DEFAULT_FMT == FMT_PPM ? " (default)" : ""));
+#endif
+#ifdef RLE_SUPPORTED
+  fprintf(stderr, "  -rle           Select Utah RLE output format%s\n",
+	  (DEFAULT_FMT == FMT_RLE ? " (default)" : ""));
+#endif
+#ifdef TARGA_SUPPORTED
+  fprintf(stderr, "  -targa         Select Targa output format%s\n",
+	  (DEFAULT_FMT == FMT_TARGA ? " (default)" : ""));
+#endif
+  fprintf(stderr, "Switches for advanced users:\n");
+#ifdef DCT_ISLOW_SUPPORTED
+  fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  fprintf(stderr, "  -dct fast      Use fast integer DCT (less accurate)%s\n",
+	  (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  fprintf(stderr, "  -dct float     Use floating-point DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
+#endif
+  fprintf(stderr, "  -dither fs     Use F-S dithering (default)\n");
+  fprintf(stderr, "  -dither none   Don't use dithering in quantization\n");
+  fprintf(stderr, "  -dither ordered  Use ordered dither (medium speed, quality)\n");
+#ifdef QUANT_2PASS_SUPPORTED
+  fprintf(stderr, "  -map FILE      Map to colors used in named image file\n");
+#endif
+  fprintf(stderr, "  -nosmooth      Don't use high-quality upsampling\n");
+#ifdef QUANT_1PASS_SUPPORTED
+  fprintf(stderr, "  -onepass       Use 1-pass quantization (fast, low quality)\n");
+#endif
+  fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
+  fprintf(stderr, "  -outfile name  Specify name for output file\n");
+  fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
+  exit(EXIT_FAILURE);
+}
+
+
+LOCAL(int)
+parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
+		int last_file_arg_seen, boolean for_real)
+/* Parse optional switches.
+ * Returns argv[] index of first file-name argument (== argc if none).
+ * Any file names with indexes <= last_file_arg_seen are ignored;
+ * they have presumably been processed in a previous iteration.
+ * (Pass 0 for last_file_arg_seen on the first or only iteration.)
+ * for_real is FALSE on the first (dummy) pass; we may skip any expensive
+ * processing.
+ */
+{
+  int argn;
+  char * arg;
+
+  /* Set up default JPEG parameters. */
+  requested_fmt = DEFAULT_FMT;	/* set default output file format */
+  outfilename = NULL;
+  cinfo->err->trace_level = 0;
+
+  /* Scan command line options, adjust parameters */
+
+  for (argn = 1; argn < argc; argn++) {
+    arg = argv[argn];
+    if (*arg != '-') {
+      /* Not a switch, must be a file name argument */
+      if (argn <= last_file_arg_seen) {
+	outfilename = NULL;	/* -outfile applies to just one input file */
+	continue;		/* ignore this name if previously processed */
+      }
+      break;			/* else done parsing switches */
+    }
+    arg++;			/* advance past switch marker character */
+
+    if (keymatch(arg, "bmp", 1)) {
+      /* BMP output format. */
+      requested_fmt = FMT_BMP;
+
+    } else if (keymatch(arg, "colors", 1) || keymatch(arg, "colours", 1) ||
+	       keymatch(arg, "quantize", 1) || keymatch(arg, "quantise", 1)) {
+      /* Do color quantization. */
+      int val;
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &val) != 1)
+	usage();
+      cinfo->desired_number_of_colors = val;
+      cinfo->quantize_colors = TRUE;
+
+    } else if (keymatch(arg, "dct", 2)) {
+      /* Select IDCT algorithm. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "int", 1)) {
+	cinfo->dct_method = JDCT_ISLOW;
+      } else if (keymatch(argv[argn], "fast", 2)) {
+	cinfo->dct_method = JDCT_IFAST;
+      } else if (keymatch(argv[argn], "float", 2)) {
+	cinfo->dct_method = JDCT_FLOAT;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "dither", 2)) {
+      /* Select dithering algorithm. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "fs", 2)) {
+	cinfo->dither_mode = JDITHER_FS;
+      } else if (keymatch(argv[argn], "none", 2)) {
+	cinfo->dither_mode = JDITHER_NONE;
+      } else if (keymatch(argv[argn], "ordered", 2)) {
+	cinfo->dither_mode = JDITHER_ORDERED;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
+      /* Enable debug printouts. */
+      /* On first -d, print version identification */
+      static boolean printed_version = FALSE;
+
+      if (! printed_version) {
+	fprintf(stderr, "Independent JPEG Group's DJPEG, version %s\n%s\n",
+		JVERSION, JCOPYRIGHT);
+	printed_version = TRUE;
+      }
+      cinfo->err->trace_level++;
+
+    } else if (keymatch(arg, "fast", 1)) {
+      /* Select recommended processing options for quick-and-dirty output. */
+      cinfo->two_pass_quantize = FALSE;
+      cinfo->dither_mode = JDITHER_ORDERED;
+      if (! cinfo->quantize_colors) /* don't override an earlier -colors */
+	cinfo->desired_number_of_colors = 216;
+      cinfo->dct_method = JDCT_FASTEST;
+      cinfo->do_fancy_upsampling = FALSE;
+
+    } else if (keymatch(arg, "gif", 1)) {
+      /* GIF output format. */
+      requested_fmt = FMT_GIF;
+
+    } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
+      /* Force monochrome output. */
+      cinfo->out_color_space = JCS_GRAYSCALE;
+
+    } else if (keymatch(arg, "map", 3)) {
+      /* Quantize to a color map taken from an input file. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (for_real) {		/* too expensive to do twice! */
+#ifdef QUANT_2PASS_SUPPORTED	/* otherwise can't quantize to supplied map */
+	FILE * mapfile;
+
+	if ((mapfile = fopen(argv[argn], READ_BINARY)) == NULL) {
+	  fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
+	  exit(EXIT_FAILURE);
+	}
+	read_color_map(cinfo, mapfile);
+	fclose(mapfile);
+	cinfo->quantize_colors = TRUE;
+#else
+	ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+      }
+
+    } else if (keymatch(arg, "maxmemory", 3)) {
+      /* Maximum memory in Kb (or Mb with 'm'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (ch == 'm' || ch == 'M')
+	lval *= 1000L;
+      cinfo->mem->max_memory_to_use = lval * 1000L;
+
+    } else if (keymatch(arg, "nosmooth", 3)) {
+      /* Suppress fancy upsampling */
+      cinfo->do_fancy_upsampling = FALSE;
+
+    } else if (keymatch(arg, "onepass", 3)) {
+      /* Use fast one-pass quantization. */
+      cinfo->two_pass_quantize = FALSE;
+
+    } else if (keymatch(arg, "os2", 3)) {
+      /* BMP output format (OS/2 flavor). */
+      requested_fmt = FMT_OS2;
+
+    } else if (keymatch(arg, "outfile", 4)) {
+      /* Set output file name. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      outfilename = argv[argn];	/* save it away for later use */
+
+    } else if (keymatch(arg, "pnm", 1) || keymatch(arg, "ppm", 1)) {
+      /* PPM/PGM output format. */
+      requested_fmt = FMT_PPM;
+
+    } else if (keymatch(arg, "rle", 1)) {
+      /* RLE output format. */
+      requested_fmt = FMT_RLE;
+
+    } else if (keymatch(arg, "scale", 1)) {
+      /* Scale the output image by a fraction M/N. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d/%d",
+		 &cinfo->scale_num, &cinfo->scale_denom) < 1)
+	usage();
+
+    } else if (keymatch(arg, "targa", 1)) {
+      /* Targa output format. */
+      requested_fmt = FMT_TARGA;
+
+    } else {
+      usage();			/* bogus switch */
+    }
+  }
+
+  return argn;			/* return index of next arg (file name) */
+}
+
+
+/*
+ * Marker processor for COM and interesting APPn markers.
+ * This replaces the library's built-in processor, which just skips the marker.
+ * We want to print out the marker as text, to the extent possible.
+ * Note this code relies on a non-suspending data source.
+ */
+
+LOCAL(unsigned int)
+jpeg_getc (j_decompress_ptr cinfo)
+/* Read next byte */
+{
+  struct jpeg_source_mgr * datasrc = cinfo->src;
+
+  if (datasrc->bytes_in_buffer == 0) {
+    if (! (*datasrc->fill_input_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+  }
+  datasrc->bytes_in_buffer--;
+  return GETJOCTET(*datasrc->next_input_byte++);
+}
+
+
+METHODDEF(boolean)
+print_text_marker (j_decompress_ptr cinfo)
+{
+  boolean traceit = (cinfo->err->trace_level >= 1);
+  INT32 length;
+  unsigned int ch;
+  unsigned int lastch = 0;
+
+  length = jpeg_getc(cinfo) << 8;
+  length += jpeg_getc(cinfo);
+  length -= 2;			/* discount the length word itself */
+
+  if (traceit) {
+    if (cinfo->unread_marker == JPEG_COM)
+      fprintf(stderr, "Comment, length %ld:\n", (long) length);
+    else			/* assume it is an APPn otherwise */
+      fprintf(stderr, "APP%d, length %ld:\n",
+	      cinfo->unread_marker - JPEG_APP0, (long) length);
+  }
+
+  while (--length >= 0) {
+    ch = jpeg_getc(cinfo);
+    if (traceit) {
+      /* Emit the character in a readable form.
+       * Nonprintables are converted to \nnn form,
+       * while \ is converted to \\.
+       * Newlines in CR, CR/LF, or LF form will be printed as one newline.
+       */
+      if (ch == '\r') {
+	fprintf(stderr, "\n");
+      } else if (ch == '\n') {
+	if (lastch != '\r')
+	  fprintf(stderr, "\n");
+      } else if (ch == '\\') {
+	fprintf(stderr, "\\\\");
+      } else if (isprint(ch)) {
+	putc(ch, stderr);
+      } else {
+	fprintf(stderr, "\\%03o", ch);
+      }
+      lastch = ch;
+    }
+  }
+
+  if (traceit)
+    fprintf(stderr, "\n");
+
+  return TRUE;
+}
+
+
+/*
+ * The main program.
+ */
+
+int
+main (int argc, char **argv)
+{
+  struct jpeg_decompress_struct cinfo;
+  struct jpeg_error_mgr jerr;
+#ifdef PROGRESS_REPORT
+  struct cdjpeg_progress_mgr progress;
+#endif
+  int file_index;
+  djpeg_dest_ptr dest_mgr = NULL;
+  FILE * input_file;
+  FILE * output_file;
+  JDIMENSION num_scanlines;
+
+  /* On Mac, fetch a command line. */
+#ifdef USE_CCOMMAND
+  argc = ccommand(&argv);
+#endif
+
+  progname = argv[0];
+  if (progname == NULL || progname[0] == 0)
+    progname = "djpeg";		/* in case C library doesn't provide it */
+
+  /* Initialize the JPEG decompression object with default error handling. */
+  cinfo.err = jpeg_std_error(&jerr);
+  jpeg_create_decompress(&cinfo);
+  /* Add some application-specific error messages (from cderror.h) */
+  jerr.addon_message_table = cdjpeg_message_table;
+  jerr.first_addon_message = JMSG_FIRSTADDONCODE;
+  jerr.last_addon_message = JMSG_LASTADDONCODE;
+
+  /* Insert custom marker processor for COM and APP12.
+   * APP12 is used by some digital camera makers for textual info,
+   * so we provide the ability to display it as text.
+   * If you like, additional APPn marker types can be selected for display,
+   * but don't try to override APP0 or APP14 this way (see libjpeg.doc).
+   */
+  jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker);
+  jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker);
+
+  /* Now safe to enable signal catcher. */
+#ifdef NEED_SIGNAL_CATCHER
+  enable_signal_catcher((j_common_ptr) &cinfo);
+#endif
+
+  /* Scan command line to find file names. */
+  /* It is convenient to use just one switch-parsing routine, but the switch
+   * values read here are ignored; we will rescan the switches after opening
+   * the input file.
+   * (Exception: tracing level set here controls verbosity for COM markers
+   * found during jpeg_read_header...)
+   */
+
+  file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
+
+#ifdef TWO_FILE_COMMANDLINE
+  /* Must have either -outfile switch or explicit output file name */
+  if (outfilename == NULL) {
+    if (file_index != argc-2) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+    outfilename = argv[file_index+1];
+  } else {
+    if (file_index != argc-1) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+  }
+#else
+  /* Unix style: expect zero or one file name */
+  if (file_index < argc-1) {
+    fprintf(stderr, "%s: only one input file\n", progname);
+    usage();
+  }
+#endif /* TWO_FILE_COMMANDLINE */
+
+  /* Open the input file. */
+  if (file_index < argc) {
+    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default input file is stdin */
+    input_file = read_stdin();
+  }
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+    output_file = write_stdout();
+  }
+
+#ifdef PROGRESS_REPORT
+  start_progress_monitor((j_common_ptr) &cinfo, &progress);
+#endif
+
+  /* Specify data source for decompression */
+  jpeg_stdio_src(&cinfo, input_file);
+
+  /* Read file header, set default decompression parameters */
+  (void) jpeg_read_header(&cinfo, TRUE);
+
+  /* Adjust default decompression parameters by re-parsing the options */
+  file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
+
+  /* Initialize the output module now to let it override any crucial
+   * option settings (for instance, GIF wants to force color quantization).
+   */
+  switch (requested_fmt) {
+#ifdef BMP_SUPPORTED
+  case FMT_BMP:
+    dest_mgr = jinit_write_bmp(&cinfo, FALSE);
+    break;
+  case FMT_OS2:
+    dest_mgr = jinit_write_bmp(&cinfo, TRUE);
+    break;
+#endif
+#ifdef GIF_SUPPORTED
+  case FMT_GIF:
+    dest_mgr = jinit_write_gif(&cinfo);
+    break;
+#endif
+#ifdef PPM_SUPPORTED
+  case FMT_PPM:
+    dest_mgr = jinit_write_ppm(&cinfo);
+    break;
+#endif
+#ifdef RLE_SUPPORTED
+  case FMT_RLE:
+    dest_mgr = jinit_write_rle(&cinfo);
+    break;
+#endif
+#ifdef TARGA_SUPPORTED
+  case FMT_TARGA:
+    dest_mgr = jinit_write_targa(&cinfo);
+    break;
+#endif
+  default:
+    ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT);
+    break;
+  }
+  dest_mgr->output_file = output_file;
+
+  /* Start decompressor */
+  (void) jpeg_start_decompress(&cinfo);
+
+  /* Write output file header */
+  (*dest_mgr->start_output) (&cinfo, dest_mgr);
+
+  /* Process data */
+  while (cinfo.output_scanline < cinfo.output_height) {
+    num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
+					dest_mgr->buffer_height);
+    (*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
+  }
+
+#ifdef PROGRESS_REPORT
+  /* Hack: count final pass as done in case finish_output does an extra pass.
+   * The library won't have updated completed_passes.
+   */
+  progress.pub.completed_passes = progress.pub.total_passes;
+#endif
+
+  /* Finish decompression and release memory.
+   * I must do it in this order because output module has allocated memory
+   * of lifespan JPOOL_IMAGE; it needs to finish before releasing memory.
+   */
+  (*dest_mgr->finish_output) (&cinfo, dest_mgr);
+  (void) jpeg_finish_decompress(&cinfo);
+  jpeg_destroy_decompress(&cinfo);
+
+  /* Close files, if we opened them */
+  if (input_file != stdin)
+    fclose(input_file);
+  if (output_file != stdout)
+    fclose(output_file);
+
+#ifdef PROGRESS_REPORT
+  end_progress_monitor((j_common_ptr) &cinfo);
+#endif
+
+  /* All done. */
+  exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
+  return 0;			/* suppress no-return-value warnings */
+}
diff --git a/jpeg-8d/example.c b/jpeg-8d/example.c
new file mode 100644
index 0000000..1d6f6cc
--- /dev/null
+++ b/jpeg-8d/example.c
@@ -0,0 +1,433 @@
+/*
+ * example.c
+ *
+ * This file illustrates how to use the IJG code as a subroutine library
+ * to read or write JPEG image files.  You should look at this code in
+ * conjunction with the documentation file libjpeg.txt.
+ *
+ * This code will not do anything useful as-is, but it may be helpful as a
+ * skeleton for constructing routines that call the JPEG library.  
+ *
+ * We present these routines in the same coding style used in the JPEG code
+ * (ANSI function definitions, etc); but you are of course free to code your
+ * routines in a different style if you prefer.
+ */
+
+#include <stdio.h>
+
+/*
+ * Include file for users of JPEG library.
+ * You will need to have included system headers that define at least
+ * the typedefs FILE and size_t before you can include jpeglib.h.
+ * (stdio.h is sufficient on ANSI-conforming systems.)
+ * You may also wish to include "jerror.h".
+ */
+
+#include "jpeglib.h"
+
+/*
+ * <setjmp.h> is used for the optional error recovery mechanism shown in
+ * the second part of the example.
+ */
+
+#include <setjmp.h>
+
+
+
+/******************** JPEG COMPRESSION SAMPLE INTERFACE *******************/
+
+/* This half of the example shows how to feed data into the JPEG compressor.
+ * We present a minimal version that does not worry about refinements such
+ * as error recovery (the JPEG code will just exit() if it gets an error).
+ */
+
+
+/*
+ * IMAGE DATA FORMATS:
+ *
+ * The standard input image format is a rectangular array of pixels, with
+ * each pixel having the same number of "component" values (color channels).
+ * Each pixel row is an array of JSAMPLEs (which typically are unsigned chars).
+ * If you are working with color data, then the color values for each pixel
+ * must be adjacent in the row; for example, R,G,B,R,G,B,R,G,B,... for 24-bit
+ * RGB color.
+ *
+ * For this example, we'll assume that this data structure matches the way
+ * our application has stored the image in memory, so we can just pass a
+ * pointer to our image buffer.  In particular, let's say that the image is
+ * RGB color and is described by:
+ */
+
+extern JSAMPLE * image_buffer;	/* Points to large array of R,G,B-order data */
+extern int image_height;	/* Number of rows in image */
+extern int image_width;		/* Number of columns in image */
+
+
+/*
+ * Sample routine for JPEG compression.  We assume that the target file name
+ * and a compression quality factor are passed in.
+ */
+
+GLOBAL(void)
+write_JPEG_file (char * filename, int quality)
+{
+  /* This struct contains the JPEG compression parameters and pointers to
+   * working space (which is allocated as needed by the JPEG library).
+   * It is possible to have several such structures, representing multiple
+   * compression/decompression processes, in existence at once.  We refer
+   * to any one struct (and its associated working data) as a "JPEG object".
+   */
+  struct jpeg_compress_struct cinfo;
+  /* This struct represents a JPEG error handler.  It is declared separately
+   * because applications often want to supply a specialized error handler
+   * (see the second half of this file for an example).  But here we just
+   * take the easy way out and use the standard error handler, which will
+   * print a message on stderr and call exit() if compression fails.
+   * Note that this struct must live as long as the main JPEG parameter
+   * struct, to avoid dangling-pointer problems.
+   */
+  struct jpeg_error_mgr jerr;
+  /* More stuff */
+  FILE * outfile;		/* target file */
+  JSAMPROW row_pointer[1];	/* pointer to JSAMPLE row[s] */
+  int row_stride;		/* physical row width in image buffer */
+
+  /* Step 1: allocate and initialize JPEG compression object */
+
+  /* We have to set up the error handler first, in case the initialization
+   * step fails.  (Unlikely, but it could happen if you are out of memory.)
+   * This routine fills in the contents of struct jerr, and returns jerr's
+   * address which we place into the link field in cinfo.
+   */
+  cinfo.err = jpeg_std_error(&jerr);
+  /* Now we can initialize the JPEG compression object. */
+  jpeg_create_compress(&cinfo);
+
+  /* Step 2: specify data destination (eg, a file) */
+  /* Note: steps 2 and 3 can be done in either order. */
+
+  /* Here we use the library-supplied code to send compressed data to a
+   * stdio stream.  You can also write your own code to do something else.
+   * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
+   * requires it in order to write binary files.
+   */
+  if ((outfile = fopen(filename, "wb")) == NULL) {
+    fprintf(stderr, "can't open %s\n", filename);
+    exit(1);
+  }
+  jpeg_stdio_dest(&cinfo, outfile);
+
+  /* Step 3: set parameters for compression */
+
+  /* First we supply a description of the input image.
+   * Four fields of the cinfo struct must be filled in:
+   */
+  cinfo.image_width = image_width; 	/* image width and height, in pixels */
+  cinfo.image_height = image_height;
+  cinfo.input_components = 3;		/* # of color components per pixel */
+  cinfo.in_color_space = JCS_RGB; 	/* colorspace of input image */
+  /* Now use the library's routine to set default compression parameters.
+   * (You must set at least cinfo.in_color_space before calling this,
+   * since the defaults depend on the source color space.)
+   */
+  jpeg_set_defaults(&cinfo);
+  /* Now you can set any non-default parameters you wish to.
+   * Here we just illustrate the use of quality (quantization table) scaling:
+   */
+  jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */);
+
+  /* Step 4: Start compressor */
+
+  /* TRUE ensures that we will write a complete interchange-JPEG file.
+   * Pass TRUE unless you are very sure of what you're doing.
+   */
+  jpeg_start_compress(&cinfo, TRUE);
+
+  /* Step 5: while (scan lines remain to be written) */
+  /*           jpeg_write_scanlines(...); */
+
+  /* Here we use the library's state variable cinfo.next_scanline as the
+   * loop counter, so that we don't have to keep track ourselves.
+   * To keep things simple, we pass one scanline per call; you can pass
+   * more if you wish, though.
+   */
+  row_stride = image_width * 3;	/* JSAMPLEs per row in image_buffer */
+
+  while (cinfo.next_scanline < cinfo.image_height) {
+    /* jpeg_write_scanlines expects an array of pointers to scanlines.
+     * Here the array is only one element long, but you could pass
+     * more than one scanline at a time if that's more convenient.
+     */
+    row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride];
+    (void) jpeg_write_scanlines(&cinfo, row_pointer, 1);
+  }
+
+  /* Step 6: Finish compression */
+
+  jpeg_finish_compress(&cinfo);
+  /* After finish_compress, we can close the output file. */
+  fclose(outfile);
+
+  /* Step 7: release JPEG compression object */
+
+  /* This is an important step since it will release a good deal of memory. */
+  jpeg_destroy_compress(&cinfo);
+
+  /* And we're done! */
+}
+
+
+/*
+ * SOME FINE POINTS:
+ *
+ * In the above loop, we ignored the return value of jpeg_write_scanlines,
+ * which is the number of scanlines actually written.  We could get away
+ * with this because we were only relying on the value of cinfo.next_scanline,
+ * which will be incremented correctly.  If you maintain additional loop
+ * variables then you should be careful to increment them properly.
+ * Actually, for output to a stdio stream you needn't worry, because
+ * then jpeg_write_scanlines will write all the lines passed (or else exit
+ * with a fatal error).  Partial writes can only occur if you use a data
+ * destination module that can demand suspension of the compressor.
+ * (If you don't know what that's for, you don't need it.)
+ *
+ * If the compressor requires full-image buffers (for entropy-coding
+ * optimization or a multi-scan JPEG file), it will create temporary
+ * files for anything that doesn't fit within the maximum-memory setting.
+ * (Note that temp files are NOT needed if you use the default parameters.)
+ * On some systems you may need to set up a signal handler to ensure that
+ * temporary files are deleted if the program is interrupted.  See libjpeg.txt.
+ *
+ * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG
+ * files to be compatible with everyone else's.  If you cannot readily read
+ * your data in that order, you'll need an intermediate array to hold the
+ * image.  See rdtarga.c or rdbmp.c for examples of handling bottom-to-top
+ * source data using the JPEG code's internal virtual-array mechanisms.
+ */
+
+
+
+/******************** JPEG DECOMPRESSION SAMPLE INTERFACE *******************/
+
+/* This half of the example shows how to read data from the JPEG decompressor.
+ * It's a bit more refined than the above, in that we show:
+ *   (a) how to modify the JPEG library's standard error-reporting behavior;
+ *   (b) how to allocate workspace using the library's memory manager.
+ *
+ * Just to make this example a little different from the first one, we'll
+ * assume that we do not intend to put the whole image into an in-memory
+ * buffer, but to send it line-by-line someplace else.  We need a one-
+ * scanline-high JSAMPLE array as a work buffer, and we will let the JPEG
+ * memory manager allocate it for us.  This approach is actually quite useful
+ * because we don't need to remember to deallocate the buffer separately: it
+ * will go away automatically when the JPEG object is cleaned up.
+ */
+
+
+/*
+ * ERROR HANDLING:
+ *
+ * The JPEG library's standard error handler (jerror.c) is divided into
+ * several "methods" which you can override individually.  This lets you
+ * adjust the behavior without duplicating a lot of code, which you might
+ * have to update with each future release.
+ *
+ * Our example here shows how to override the "error_exit" method so that
+ * control is returned to the library's caller when a fatal error occurs,
+ * rather than calling exit() as the standard error_exit method does.
+ *
+ * We use C's setjmp/longjmp facility to return control.  This means that the
+ * routine which calls the JPEG library must first execute a setjmp() call to
+ * establish the return point.  We want the replacement error_exit to do a
+ * longjmp().  But we need to make the setjmp buffer accessible to the
+ * error_exit routine.  To do this, we make a private extension of the
+ * standard JPEG error handler object.  (If we were using C++, we'd say we
+ * were making a subclass of the regular error handler.)
+ *
+ * Here's the extended error handler struct:
+ */
+
+struct my_error_mgr {
+  struct jpeg_error_mgr pub;	/* "public" fields */
+
+  jmp_buf setjmp_buffer;	/* for return to caller */
+};
+
+typedef struct my_error_mgr * my_error_ptr;
+
+/*
+ * Here's the routine that will replace the standard error_exit method:
+ */
+
+METHODDEF(void)
+my_error_exit (j_common_ptr cinfo)
+{
+  /* cinfo->err really points to a my_error_mgr struct, so coerce pointer */
+  my_error_ptr myerr = (my_error_ptr) cinfo->err;
+
+  /* Always display the message. */
+  /* We could postpone this until after returning, if we chose. */
+  (*cinfo->err->output_message) (cinfo);
+
+  /* Return control to the setjmp point */
+  longjmp(myerr->setjmp_buffer, 1);
+}
+
+
+/*
+ * Sample routine for JPEG decompression.  We assume that the source file name
+ * is passed in.  We want to return 1 on success, 0 on error.
+ */
+
+
+GLOBAL(int)
+read_JPEG_file (char * filename)
+{
+  /* This struct contains the JPEG decompression parameters and pointers to
+   * working space (which is allocated as needed by the JPEG library).
+   */
+  struct jpeg_decompress_struct cinfo;
+  /* We use our private extension JPEG error handler.
+   * Note that this struct must live as long as the main JPEG parameter
+   * struct, to avoid dangling-pointer problems.
+   */
+  struct my_error_mgr jerr;
+  /* More stuff */
+  FILE * infile;		/* source file */
+  JSAMPARRAY buffer;		/* Output row buffer */
+  int row_stride;		/* physical row width in output buffer */
+
+  /* In this example we want to open the input file before doing anything else,
+   * so that the setjmp() error recovery below can assume the file is open.
+   * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
+   * requires it in order to read binary files.
+   */
+
+  if ((infile = fopen(filename, "rb")) == NULL) {
+    fprintf(stderr, "can't open %s\n", filename);
+    return 0;
+  }
+
+  /* Step 1: allocate and initialize JPEG decompression object */
+
+  /* We set up the normal JPEG error routines, then override error_exit. */
+  cinfo.err = jpeg_std_error(&jerr.pub);
+  jerr.pub.error_exit = my_error_exit;
+  /* Establish the setjmp return context for my_error_exit to use. */
+  if (setjmp(jerr.setjmp_buffer)) {
+    /* If we get here, the JPEG code has signaled an error.
+     * We need to clean up the JPEG object, close the input file, and return.
+     */
+    jpeg_destroy_decompress(&cinfo);
+    fclose(infile);
+    return 0;
+  }
+  /* Now we can initialize the JPEG decompression object. */
+  jpeg_create_decompress(&cinfo);
+
+  /* Step 2: specify data source (eg, a file) */
+
+  jpeg_stdio_src(&cinfo, infile);
+
+  /* Step 3: read file parameters with jpeg_read_header() */
+
+  (void) jpeg_read_header(&cinfo, TRUE);
+  /* We can ignore the return value from jpeg_read_header since
+   *   (a) suspension is not possible with the stdio data source, and
+   *   (b) we passed TRUE to reject a tables-only JPEG file as an error.
+   * See libjpeg.txt for more info.
+   */
+
+  /* Step 4: set parameters for decompression */
+
+  /* In this example, we don't need to change any of the defaults set by
+   * jpeg_read_header(), so we do nothing here.
+   */
+
+  /* Step 5: Start decompressor */
+
+  (void) jpeg_start_decompress(&cinfo);
+  /* We can ignore the return value since suspension is not possible
+   * with the stdio data source.
+   */
+
+  /* We may need to do some setup of our own at this point before reading
+   * the data.  After jpeg_start_decompress() we have the correct scaled
+   * output image dimensions available, as well as the output colormap
+   * if we asked for color quantization.
+   * In this example, we need to make an output work buffer of the right size.
+   */ 
+  /* JSAMPLEs per row in output buffer */
+  row_stride = cinfo.output_width * cinfo.output_components;
+  /* Make a one-row-high sample array that will go away when done with image */
+  buffer = (*cinfo.mem->alloc_sarray)
+		((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1);
+
+  /* Step 6: while (scan lines remain to be read) */
+  /*           jpeg_read_scanlines(...); */
+
+  /* Here we use the library's state variable cinfo.output_scanline as the
+   * loop counter, so that we don't have to keep track ourselves.
+   */
+  while (cinfo.output_scanline < cinfo.output_height) {
+    /* jpeg_read_scanlines expects an array of pointers to scanlines.
+     * Here the array is only one element long, but you could ask for
+     * more than one scanline at a time if that's more convenient.
+     */
+    (void) jpeg_read_scanlines(&cinfo, buffer, 1);
+    /* Assume put_scanline_someplace wants a pointer and sample count. */
+    put_scanline_someplace(buffer[0], row_stride);
+  }
+
+  /* Step 7: Finish decompression */
+
+  (void) jpeg_finish_decompress(&cinfo);
+  /* We can ignore the return value since suspension is not possible
+   * with the stdio data source.
+   */
+
+  /* Step 8: Release JPEG decompression object */
+
+  /* This is an important step since it will release a good deal of memory. */
+  jpeg_destroy_decompress(&cinfo);
+
+  /* After finish_decompress, we can close the input file.
+   * Here we postpone it until after no more JPEG errors are possible,
+   * so as to simplify the setjmp error logic above.  (Actually, I don't
+   * think that jpeg_destroy can do an error exit, but why assume anything...)
+   */
+  fclose(infile);
+
+  /* At this point you may want to check to see whether any corrupt-data
+   * warnings occurred (test whether jerr.pub.num_warnings is nonzero).
+   */
+
+  /* And we're done! */
+  return 1;
+}
+
+
+/*
+ * SOME FINE POINTS:
+ *
+ * In the above code, we ignored the return value of jpeg_read_scanlines,
+ * which is the number of scanlines actually read.  We could get away with
+ * this because we asked for only one line at a time and we weren't using
+ * a suspending data source.  See libjpeg.txt for more info.
+ *
+ * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress();
+ * we should have done it beforehand to ensure that the space would be
+ * counted against the JPEG max_memory setting.  In some systems the above
+ * code would risk an out-of-memory error.  However, in general we don't
+ * know the output image dimensions before jpeg_start_decompress(), unless we
+ * call jpeg_calc_output_dimensions().  See libjpeg.txt for more about this.
+ *
+ * Scanlines are returned in the same order as they appear in the JPEG file,
+ * which is standardly top-to-bottom.  If you must emit data bottom-to-top,
+ * you can use one of the virtual arrays provided by the JPEG memory manager
+ * to invert the data.  See wrbmp.c for an example.
+ *
+ * As with compression, some operating modes may require temporary files.
+ * On some systems you may need to set up a signal handler to ensure that
+ * temporary files are deleted if the program is interrupted.  See libjpeg.txt.
+ */
diff --git a/jpeg-8d/filelist.txt b/jpeg-8d/filelist.txt
new file mode 100644
index 0000000..7e05386
--- /dev/null
+++ b/jpeg-8d/filelist.txt
@@ -0,0 +1,215 @@
+IJG JPEG LIBRARY:  FILE LIST
+
+Copyright (C) 1994-2009, Thomas G. Lane, Guido Vollbeding.
+This file is part of the Independent JPEG Group's software.
+For conditions of distribution and use, see the accompanying README file.
+
+
+Here is a road map to the files in the IJG JPEG distribution.  The
+distribution includes the JPEG library proper, plus two application
+programs ("cjpeg" and "djpeg") which use the library to convert JPEG
+files to and from some other popular image formats.  A third application
+"jpegtran" uses the library to do lossless conversion between different
+variants of JPEG.  There are also two stand-alone applications,
+"rdjpgcom" and "wrjpgcom".
+
+
+THE JPEG LIBRARY
+================
+
+Include files:
+
+jpeglib.h	JPEG library's exported data and function declarations.
+jconfig.h	Configuration declarations.  Note: this file is not present
+		in the distribution; it is generated during installation.
+jmorecfg.h	Additional configuration declarations; need not be changed
+		for a standard installation.
+jerror.h	Declares JPEG library's error and trace message codes.
+jinclude.h	Central include file used by all IJG .c files to reference
+		system include files.
+jpegint.h	JPEG library's internal data structures.
+jdct.h		Private declarations for forward & reverse DCT subsystems.
+jmemsys.h	Private declarations for memory management subsystem.
+jversion.h	Version information.
+
+Applications using the library should include jpeglib.h (which in turn
+includes jconfig.h and jmorecfg.h).  Optionally, jerror.h may be included
+if the application needs to reference individual JPEG error codes.  The
+other include files are intended for internal use and would not normally
+be included by an application program.  (cjpeg/djpeg/etc do use jinclude.h,
+since its function is to improve portability of the whole IJG distribution.
+Most other applications will directly include the system include files they
+want, and hence won't need jinclude.h.)
+
+
+C source code files:
+
+These files contain most of the functions intended to be called directly by
+an application program:
+
+jcapimin.c	Application program interface: core routines for compression.
+jcapistd.c	Application program interface: standard compression.
+jdapimin.c	Application program interface: core routines for decompression.
+jdapistd.c	Application program interface: standard decompression.
+jcomapi.c	Application program interface routines common to compression
+		and decompression.
+jcparam.c	Compression parameter setting helper routines.
+jctrans.c	API and library routines for transcoding compression.
+jdtrans.c	API and library routines for transcoding decompression.
+
+Compression side of the library:
+
+jcinit.c	Initialization: determines which other modules to use.
+jcmaster.c	Master control: setup and inter-pass sequencing logic.
+jcmainct.c	Main buffer controller (preprocessor => JPEG compressor).
+jcprepct.c	Preprocessor buffer controller.
+jccoefct.c	Buffer controller for DCT coefficient buffer.
+jccolor.c	Color space conversion.
+jcsample.c	Downsampling.
+jcdctmgr.c	DCT manager (DCT implementation selection & control).
+jfdctint.c	Forward DCT using slow-but-accurate integer method.
+jfdctfst.c	Forward DCT using faster, less accurate integer method.
+jfdctflt.c	Forward DCT using floating-point arithmetic.
+jchuff.c	Huffman entropy coding.
+jcarith.c	Arithmetic entropy coding.
+jcmarker.c	JPEG marker writing.
+jdatadst.c	Data destination managers for memory and stdio output.
+
+Decompression side of the library:
+
+jdmaster.c	Master control: determines which other modules to use.
+jdinput.c	Input controller: controls input processing modules.
+jdmainct.c	Main buffer controller (JPEG decompressor => postprocessor).
+jdcoefct.c	Buffer controller for DCT coefficient buffer.
+jdpostct.c	Postprocessor buffer controller.
+jdmarker.c	JPEG marker reading.
+jdhuff.c	Huffman entropy decoding.
+jdarith.c	Arithmetic entropy decoding.
+jddctmgr.c	IDCT manager (IDCT implementation selection & control).
+jidctint.c	Inverse DCT using slow-but-accurate integer method.
+jidctfst.c	Inverse DCT using faster, less accurate integer method.
+jidctflt.c	Inverse DCT using floating-point arithmetic.
+jdsample.c	Upsampling.
+jdcolor.c	Color space conversion.
+jdmerge.c	Merged upsampling/color conversion (faster, lower quality).
+jquant1.c	One-pass color quantization using a fixed-spacing colormap.
+jquant2.c	Two-pass color quantization using a custom-generated colormap.
+		Also handles one-pass quantization to an externally given map.
+jdatasrc.c	Data source managers for memory and stdio input.
+
+Support files for both compression and decompression:
+
+jaricom.c	Tables for common use in arithmetic entropy encoding and
+		decoding routines.
+jerror.c	Standard error handling routines (application replaceable).
+jmemmgr.c	System-independent (more or less) memory management code.
+jutils.c	Miscellaneous utility routines.
+
+jmemmgr.c relies on a system-dependent memory management module.  The IJG
+distribution includes the following implementations of the system-dependent
+module:
+
+jmemnobs.c	"No backing store": assumes adequate virtual memory exists.
+jmemansi.c	Makes temporary files with ANSI-standard routine tmpfile().
+jmemname.c	Makes temporary files with program-generated file names.
+jmemdos.c	Custom implementation for MS-DOS (16-bit environment only):
+		can use extended and expanded memory as well as temp files.
+jmemmac.c	Custom implementation for Apple Macintosh.
+
+Exactly one of the system-dependent modules should be configured into an
+installed JPEG library (see install.txt for hints about which one to use).
+On unusual systems you may find it worthwhile to make a special
+system-dependent memory manager.
+
+
+Non-C source code files:
+
+jmemdosa.asm	80x86 assembly code support for jmemdos.c; used only in
+		MS-DOS-specific configurations of the JPEG library.
+
+
+CJPEG/DJPEG/JPEGTRAN
+====================
+
+Include files:
+
+cdjpeg.h	Declarations shared by cjpeg/djpeg/jpegtran modules.
+cderror.h	Additional error and trace message codes for cjpeg et al.
+transupp.h	Declarations for jpegtran support routines in transupp.c.
+
+C source code files:
+
+cjpeg.c		Main program for cjpeg.
+djpeg.c		Main program for djpeg.
+jpegtran.c	Main program for jpegtran.
+cdjpeg.c	Utility routines used by all three programs.
+rdcolmap.c	Code to read a colormap file for djpeg's "-map" switch.
+rdswitch.c	Code to process some of cjpeg's more complex switches.
+		Also used by jpegtran.
+transupp.c	Support code for jpegtran: lossless image manipulations.
+
+Image file reader modules for cjpeg:
+
+rdbmp.c		BMP file input.
+rdgif.c		GIF file input (now just a stub).
+rdppm.c		PPM/PGM file input.
+rdrle.c		Utah RLE file input.
+rdtarga.c	Targa file input.
+
+Image file writer modules for djpeg:
+
+wrbmp.c		BMP file output.
+wrgif.c		GIF file output (a mere shadow of its former self).
+wrppm.c		PPM/PGM file output.
+wrrle.c		Utah RLE file output.
+wrtarga.c	Targa file output.
+
+
+RDJPGCOM/WRJPGCOM
+=================
+
+C source code files:
+
+rdjpgcom.c	Stand-alone rdjpgcom application.
+wrjpgcom.c	Stand-alone wrjpgcom application.
+
+These programs do not depend on the IJG library.  They do use
+jconfig.h and jinclude.h, only to improve portability.
+
+
+ADDITIONAL FILES
+================
+
+Documentation (see README for a guide to the documentation files):
+
+README		Master documentation file.
+*.txt		Other documentation files.
+*.1		Documentation in Unix man page format.
+change.log	Version-to-version change highlights.
+example.c	Sample code for calling JPEG library.
+
+Configuration/installation files and programs (see install.txt for more info):
+
+configure	Unix shell script to perform automatic configuration.
+configure.ac	Source file for use with Autoconf to generate configure.
+ltmain.sh	Support scripts for configure (from GNU libtool).
+config.guess
+config.sub
+depcomp
+missing
+install-sh	Install shell script for those Unix systems lacking one.
+Makefile.in	Makefile input for configure.
+Makefile.am	Source file for use with Automake to generate Makefile.in.
+ckconfig.c	Program to generate jconfig.h on non-Unix systems.
+jconfig.txt	Template for making jconfig.h by hand.
+mak*.*		Sample makefiles for particular systems.
+jconfig.*	Sample jconfig.h for particular systems.
+libjpeg.map	Script to generate shared library with versioned symbols.
+aclocal.m4	M4 macro definitions for use with Autoconf.
+ansi2knr.c	De-ANSIfier for pre-ANSI C compilers (courtesy of
+		L. Peter Deutsch and Aladdin Enterprises).
+
+Test files (see install.txt for test procedure):
+
+test*.*		Source and comparison files for confidence test.
+		These are binary image files, NOT text files.
diff --git a/jpeg-8d/install-sh b/jpeg-8d/install-sh
new file mode 100644
index 0000000..a9244eb
--- /dev/null
+++ b/jpeg-8d/install-sh
@@ -0,0 +1,527 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-01-19.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
+
+    -o) chowncmd="$chownprog $2"
+	shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t) dst_arg=$2
+	# Protect names problematic for `test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for `test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for `test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	[-=\(\)!]*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test X"$d" = X && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/jpeg-8d/install.txt b/jpeg-8d/install.txt
new file mode 100644
index 0000000..04bed91
--- /dev/null
+++ b/jpeg-8d/install.txt
@@ -0,0 +1,1096 @@
+INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software
+
+Copyright (C) 1991-2011, Thomas G. Lane, Guido Vollbeding.
+This file is part of the Independent JPEG Group's software.
+For conditions of distribution and use, see the accompanying README file.
+
+
+This file explains how to configure and install the IJG software.  We have
+tried to make this software extremely portable and flexible, so that it can be
+adapted to almost any environment.  The downside of this decision is that the
+installation process is complicated.  We have provided shortcuts to simplify
+the task on common systems.  But in any case, you will need at least a little
+familiarity with C programming and program build procedures for your system.
+
+If you are only using this software as part of a larger program, the larger
+program's installation procedure may take care of configuring the IJG code.
+For example, Ghostscript's installation script will configure the IJG code.
+You don't need to read this file if you just want to compile Ghostscript.
+
+If you are on a Unix machine, you may not need to read this file at all.
+Try doing
+	./configure
+	make
+	make test
+If that doesn't complain, do
+	make install
+(better do "make -n install" first to see if the makefile will put the files
+where you want them).  Read further if you run into snags or want to customize
+the code for your system.
+
+
+TABLE OF CONTENTS
+-----------------
+
+Before you start
+Configuring the software:
+	using the automatic "configure" script
+	using one of the supplied jconfig and makefile files
+	by hand
+Building the software
+Testing the software
+Installing the software
+Optional stuff
+Optimization
+Hints for specific systems
+
+
+BEFORE YOU START
+================
+
+Before installing the software you must unpack the distributed source code.
+Since you are reading this file, you have probably already succeeded in this
+task.  However, there is a potential for error if you needed to convert the
+files to the local standard text file format (for example, if you are on
+MS-DOS you may have converted LF end-of-line to CR/LF).  You must apply
+such conversion to all the files EXCEPT those whose names begin with "test".
+The test files contain binary data; if you change them in any way then the
+self-test will give bad results.
+
+Please check the last section of this file to see if there are hints for the
+specific machine or compiler you are using.
+
+
+CONFIGURING THE SOFTWARE
+========================
+
+To configure the IJG code for your system, you need to create two files:
+  * jconfig.h: contains values for system-dependent #define symbols.
+  * Makefile: controls the compilation process.
+(On a non-Unix machine, you may create "project files" or some other
+substitute for a Makefile.  jconfig.h is needed in any environment.)
+
+We provide three different ways to generate these files:
+  * On a Unix system, you can just run the "configure" script.
+  * We provide sample jconfig files and makefiles for popular machines;
+    if your machine matches one of the samples, just copy the right sample
+    files to jconfig.h and Makefile.
+  * If all else fails, read the instructions below and make your own files.
+
+
+Configuring the software using the automatic "configure" script
+---------------------------------------------------------------
+
+If you are on a Unix machine, you can just type
+	./configure
+and let the configure script construct appropriate configuration files.
+If you're using "csh" on an old version of System V, you might need to type
+	sh configure
+instead to prevent csh from trying to execute configure itself.
+Expect configure to run for a few minutes, particularly on slower machines;
+it works by compiling a series of test programs.
+
+Configure was created with GNU Autoconf and it follows the usual conventions
+for GNU configure scripts.  It makes a few assumptions that you may want to
+override.  You can do this by providing optional switches to configure:
+
+* Configure will build both static and shared libraries, if possible.
+If you want to build libjpeg only as a static library, say
+	./configure --disable-shared
+If you want to build libjpeg only as a shared library, say
+	./configure --disable-static
+Configure uses GNU libtool to take care of system-dependent shared library
+building methods.
+
+* Configure will use gcc (GNU C compiler) if it's available, otherwise cc.
+To force a particular compiler to be selected, use the CC option, for example
+	./configure CC='cc'
+The same method can be used to include any unusual compiler switches.
+For example, on HP-UX you probably want to say
+	./configure CC='cc -Aa'
+to get HP's compiler to run in ANSI mode.
+
+* The default CFLAGS setting is "-g" for non-gcc compilers, "-g -O2" for gcc.
+You can override this by saying, for example,
+	./configure CFLAGS='-O2'
+if you want to compile without debugging support.
+
+* Configure will set up the makefile so that "make install" will install files
+into /usr/local/bin, /usr/local/man, etc.  You can specify an installation
+prefix other than "/usr/local" by giving configure the option "--prefix=PATH".
+
+* If you don't have a lot of swap space, you may need to enable the IJG
+software's internal virtual memory mechanism.  To do this, give the option
+"--enable-maxmem=N" where N is the default maxmemory limit in megabytes.
+This is discussed in more detail under "Selecting a memory manager", below.
+You probably don't need to worry about this on reasonably-sized Unix machines,
+unless you plan to process very large images.
+
+Configure has some other features that are useful if you are cross-compiling
+or working in a network of multiple machine types; but if you need those
+features, you probably already know how to use them.
+
+
+Configuring the software using one of the supplied jconfig and makefile files
+-----------------------------------------------------------------------------
+
+If you have one of these systems, you can just use the provided configuration
+files:
+
+Makefile	jconfig file	System and/or compiler
+
+makefile.manx	jconfig.manx	Amiga, Manx Aztec C
+makefile.sas	jconfig.sas	Amiga, SAS C
+makeproj.mac	jconfig.mac	Apple Macintosh, Metrowerks CodeWarrior
+mak*jpeg.st	jconfig.st	Atari ST/STE/TT, Pure C or Turbo C
+makefile.bcc	jconfig.bcc	MS-DOS or OS/2, Borland C
+makefile.dj	jconfig.dj	MS-DOS, DJGPP (Delorie's port of GNU C)
+makefile.mc6	jconfig.mc6	MS-DOS, Microsoft C (16-bit only)
+makefile.wat	jconfig.wat	MS-DOS, OS/2, or Windows NT, Watcom C
+makefile.vc	jconfig.vc	Windows NT/95, MS Visual C++
+make*.vc6	jconfig.vc	Windows NT/95, MS Visual C++ 6
+make*.v10	jconfig.vc	Windows NT/95, MS Visual C++ 2010 (v10)
+makefile.mms	jconfig.vms	Digital VMS, with MMS software
+makefile.vms	jconfig.vms	Digital VMS, without MMS software
+
+Copy the proper jconfig file to jconfig.h and the makefile to Makefile (or
+whatever your system uses as the standard makefile name).  For more info see
+the appropriate system-specific hints section near the end of this file.
+
+
+Configuring the software by hand
+--------------------------------
+
+First, generate a jconfig.h file.  If you are moderately familiar with C,
+the comments in jconfig.txt should be enough information to do this; just
+copy jconfig.txt to jconfig.h and edit it appropriately.  Otherwise, you may
+prefer to use the ckconfig.c program.  You will need to compile and execute
+ckconfig.c by hand --- we hope you know at least enough to do that.
+ckconfig.c may not compile the first try (in fact, the whole idea is for it
+to fail if anything is going to).  If you get compile errors, fix them by
+editing ckconfig.c according to the directions given in ckconfig.c.  Once
+you get it to run, it will write a suitable jconfig.h file, and will also
+print out some advice about which makefile to use.
+
+You may also want to look at the canned jconfig files, if there is one for a
+system similar to yours.
+
+Second, select a makefile and copy it to Makefile (or whatever your system
+uses as the standard makefile name).  The most generic makefiles we provide
+are
+	makefile.ansi:	if your C compiler supports function prototypes
+	makefile.unix:	if not.
+(You have function prototypes if ckconfig.c put "#define HAVE_PROTOTYPES"
+in jconfig.h.)  You may want to start from one of the other makefiles if
+there is one for a system similar to yours.
+
+Look over the selected Makefile and adjust options as needed.  In particular
+you may want to change the CC and CFLAGS definitions.  For instance, if you
+are using GCC, set CC=gcc.  If you had to use any compiler switches to get
+ckconfig.c to work, make sure the same switches are in CFLAGS.
+
+If you are on a system that doesn't use makefiles, you'll need to set up
+project files (or whatever you do use) to compile all the source files and
+link them into executable files cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom.
+See the file lists in any of the makefiles to find out which files go into
+each program.  Note that the provided makefiles all make a "library" file
+libjpeg first, but you don't have to do that if you don't want to; the file
+lists identify which source files are actually needed for compression,
+decompression, or both.  As a last resort, you can make a batch script that
+just compiles everything and links it all together; makefile.vms is an example
+of this (it's for VMS systems that have no make-like utility).
+
+Here are comments about some specific configuration decisions you'll
+need to make:
+
+Command line style
+------------------
+
+These programs can use a Unix-like command line style which supports
+redirection and piping, like this:
+	cjpeg inputfile >outputfile
+	cjpeg <inputfile >outputfile
+	source program | cjpeg >outputfile
+The simpler "two file" command line style is just
+	cjpeg inputfile outputfile
+You may prefer the two-file style, particularly if you don't have pipes.
+
+You MUST use two-file style on any system that doesn't cope well with binary
+data fed through stdin/stdout; this is true for some MS-DOS compilers, for
+example.  If you're not on a Unix system, it's safest to assume you need
+two-file style.  (But if your compiler provides either the Posix-standard
+fdopen() library routine or a Microsoft-compatible setmode() routine, you
+can safely use the Unix command line style, by defining USE_FDOPEN or
+USE_SETMODE respectively.)
+
+To use the two-file style, make jconfig.h say "#define TWO_FILE_COMMANDLINE".
+
+Selecting a memory manager
+--------------------------
+
+The IJG code is capable of working on images that are too big to fit in main
+memory; data is swapped out to temporary files as necessary.  However, the
+code to do this is rather system-dependent.  We provide five different
+memory managers:
+
+* jmemansi.c	This version uses the ANSI-standard library routine tmpfile(),
+		which not all non-ANSI systems have.  On some systems
+		tmpfile() may put the temporary file in a non-optimal
+		location; if you don't like what it does, use jmemname.c.
+
+* jmemname.c	This version creates named temporary files.  For anything
+		except a Unix machine, you'll need to configure the
+		select_file_name() routine appropriately; see the comments
+		near the head of jmemname.c.  If you use this version, define
+		NEED_SIGNAL_CATCHER in jconfig.h to make sure the temp files
+		are removed if the program is aborted.
+
+* jmemnobs.c	(That stands for No Backing Store :-).)  This will compile on
+		almost any system, but it assumes you have enough main memory
+		or virtual memory to hold the biggest images you work with.
+
+* jmemdos.c	This should be used with most 16-bit MS-DOS compilers.
+		See the system-specific notes about MS-DOS for more info.
+		IMPORTANT: if you use this, define USE_MSDOS_MEMMGR in
+		jconfig.h, and include the assembly file jmemdosa.asm in the
+		programs.  The supplied makefiles and jconfig files for
+		16-bit MS-DOS compilers already do both.
+
+* jmemmac.c	Custom version for Apple Macintosh; see the system-specific
+		notes for Macintosh for more info.
+
+To use a particular memory manager, change the SYSDEPMEM variable in your
+makefile to equal the corresponding object file name (for example, jmemansi.o
+or jmemansi.obj for jmemansi.c).
+
+If you have plenty of (real or virtual) main memory, just use jmemnobs.c.
+"Plenty" means about ten bytes for every pixel in the largest images
+you plan to process, so a lot of systems don't meet this criterion.
+If yours doesn't, try jmemansi.c first.  If that doesn't compile, you'll have
+to use jmemname.c; be sure to adjust select_file_name() for local conditions.
+You may also need to change unlink() to remove() in close_backing_store().
+
+Except with jmemnobs.c or jmemmac.c, you need to adjust the DEFAULT_MAX_MEM
+setting to a reasonable value for your system (either by adding a #define for
+DEFAULT_MAX_MEM to jconfig.h, or by adding a -D switch to the Makefile).
+This value limits the amount of data space the program will attempt to
+allocate.  Code and static data space isn't counted, so the actual memory
+needs for cjpeg or djpeg are typically 100 to 150Kb more than the max-memory
+setting.  Larger max-memory settings reduce the amount of I/O needed to
+process a large image, but too large a value can result in "insufficient
+memory" failures.  On most Unix machines (and other systems with virtual
+memory), just set DEFAULT_MAX_MEM to several million and forget it.  At the
+other end of the spectrum, for MS-DOS machines you probably can't go much
+above 300K to 400K.  (On MS-DOS the value refers to conventional memory only.
+Extended/expanded memory is handled separately by jmemdos.c.)
+
+
+BUILDING THE SOFTWARE
+=====================
+
+Now you should be able to compile the software.  Just say "make" (or
+whatever's necessary to start the compilation).  Have a cup of coffee.
+
+Here are some things that could go wrong:
+
+If your compiler complains about undefined structures, you should be able to
+shut it up by putting "#define INCOMPLETE_TYPES_BROKEN" in jconfig.h.
+
+If you have trouble with missing system include files or inclusion of the
+wrong ones, read jinclude.h.  This shouldn't happen if you used configure
+or ckconfig.c to set up jconfig.h.
+
+There are a fair number of routines that do not use all of their parameters;
+some compilers will issue warnings about this, which you can ignore.  There
+are also a few configuration checks that may give "unreachable code" warnings.
+Any other warning deserves investigation.
+
+If you don't have a getenv() library routine, define NO_GETENV.
+
+Also see the system-specific hints, below.
+
+
+TESTING THE SOFTWARE
+====================
+
+As a quick test of functionality we've included a small sample image in
+several forms:
+	testorig.jpg	Starting point for the djpeg tests.
+	testimg.ppm	The output of djpeg testorig.jpg
+	testimg.bmp	The output of djpeg -bmp -colors 256 testorig.jpg
+	testimg.jpg	The output of cjpeg testimg.ppm
+	testprog.jpg	Progressive-mode equivalent of testorig.jpg.
+	testimgp.jpg	The output of cjpeg -progressive -optimize testimg.ppm
+(The first- and second-generation .jpg files aren't identical since the
+default compression parameters are lossy.)  If you can generate duplicates
+of the testimg* files then you probably have working programs.
+
+With most of the makefiles, "make test" will perform the necessary
+comparisons.
+
+If you're using a makefile that doesn't provide the test option, run djpeg
+and cjpeg by hand and compare the output files to testimg* with whatever
+binary file comparison tool you have.  The files should be bit-for-bit
+identical.
+
+If the programs complain "MAX_ALLOC_CHUNK is wrong, please fix", then you
+need to reduce MAX_ALLOC_CHUNK to a value that fits in type size_t.
+Try adding "#define MAX_ALLOC_CHUNK 65520L" to jconfig.h.  A less likely
+configuration error is "ALIGN_TYPE is wrong, please fix": defining ALIGN_TYPE
+as long should take care of that one.
+
+If the cjpeg test run fails with "Missing Huffman code table entry", it's a
+good bet that you needed to define RIGHT_SHIFT_IS_UNSIGNED.  Go back to the
+configuration step and run ckconfig.c.  (This is a good plan for any other
+test failure, too.)
+
+If you are using Unix (one-file) command line style on a non-Unix system,
+it's a good idea to check that binary I/O through stdin/stdout actually
+works.  You should get the same results from "djpeg <testorig.jpg >out.ppm"
+as from "djpeg -outfile out.ppm testorig.jpg".  Note that the makefiles all
+use the latter style and therefore do not exercise stdin/stdout!  If this
+check fails, try recompiling with USE_SETMODE or USE_FDOPEN defined.
+If it still doesn't work, better use two-file style.
+
+If you chose a memory manager other than jmemnobs.c, you should test that
+temporary-file usage works.  Try "djpeg -bmp -colors 256 -max 0 testorig.jpg"
+and make sure its output matches testimg.bmp.  If you have any really large
+images handy, try compressing them with -optimize and/or decompressing with
+-colors 256 to make sure your DEFAULT_MAX_MEM setting is not too large.
+
+NOTE: this is far from an exhaustive test of the JPEG software; some modules,
+such as 1-pass color quantization, are not exercised at all.  It's just a
+quick test to give you some confidence that you haven't missed something
+major.
+
+
+INSTALLING THE SOFTWARE
+=======================
+
+Once you're done with the above steps, you can install the software by
+copying the executable files (cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom)
+to wherever you normally install programs.  On Unix systems, you'll also want
+to put the man pages (cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1)
+in the man-page directory.  The pre-fab makefiles don't support this step
+since there's such a wide variety of installation procedures on different
+systems.
+
+If you generated a Makefile with the "configure" script, you can just say
+	make install
+to install the programs and their man pages into the standard places.
+(You'll probably need to be root to do this.)  We recommend first saying
+	make -n install
+to see where configure thought the files should go.  You may need to edit
+the Makefile, particularly if your system's conventions for man page
+filenames don't match what configure expects.
+
+If you want to install the IJG library itself, for use in compiling other
+programs besides ours, then you need to put the four include files
+	jpeglib.h jerror.h jconfig.h jmorecfg.h
+into your include-file directory, and put the library file libjpeg.a
+(extension may vary depending on system) wherever library files go.
+If you generated a Makefile with "configure", it will do what it thinks
+is the right thing if you say
+	make install-lib
+
+
+OPTIONAL STUFF
+==============
+
+Progress monitor:
+
+If you like, you can #define PROGRESS_REPORT (in jconfig.h) to enable display
+of percent-done progress reports.  The routine provided in cdjpeg.c merely
+prints percentages to stderr, but you can customize it to do something
+fancier.
+
+Utah RLE file format support:
+
+We distribute the software with support for RLE image files (Utah Raster
+Toolkit format) disabled, because the RLE support won't compile without the
+Utah library.  If you have URT version 3.1 or later, you can enable RLE
+support as follows:
+	1.  #define RLE_SUPPORTED in jconfig.h.
+	2.  Add a -I option to CFLAGS in the Makefile for the directory
+	    containing the URT .h files (typically the "include"
+	    subdirectory of the URT distribution).
+	3.  Add -L... -lrle to LDLIBS in the Makefile, where ... specifies
+	    the directory containing the URT "librle.a" file (typically the
+	    "lib" subdirectory of the URT distribution).
+
+Support for 12-bit-deep pixel data:
+
+The JPEG standard allows either 8-bit or 12-bit data precision.  (For color,
+this means 8 or 12 bits per channel, of course.)  If you need to work with
+deeper than 8-bit data, you can compile the IJG code for 12-bit operation.
+To do so:
+  1. In jmorecfg.h, define BITS_IN_JSAMPLE as 12 rather than 8.
+  2. In jconfig.h, undefine BMP_SUPPORTED, RLE_SUPPORTED, and TARGA_SUPPORTED,
+     because the code for those formats doesn't handle 12-bit data and won't
+     even compile.  (The PPM code does work, as explained below.  The GIF
+     code works too; it scales 8-bit GIF data to and from 12-bit depth
+     automatically.)
+  3. Compile.  Don't expect "make test" to pass, since the supplied test
+     files are for 8-bit data.
+
+Currently, 12-bit support does not work on 16-bit-int machines.
+
+Note that a 12-bit version will not read 8-bit JPEG files, nor vice versa;
+so you'll want to keep around a regular 8-bit compilation as well.
+(Run-time selection of data depth, to allow a single copy that does both,
+is possible but would probably slow things down considerably; it's very low
+on our to-do list.)
+
+The PPM reader (rdppm.c) can read 12-bit data from either text-format or
+binary-format PPM and PGM files.  Binary-format PPM/PGM files which have a
+maxval greater than 255 are assumed to use 2 bytes per sample, MSB first
+(big-endian order).  As of early 1995, 2-byte binary format is not
+officially supported by the PBMPLUS library, but it is expected that a
+future release of PBMPLUS will support it.  Note that the PPM reader will
+read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming
+data is automatically rescaled to either maxval=255 or maxval=4095 as
+appropriate for the cjpeg bit depth.
+
+The PPM writer (wrppm.c) will normally write 2-byte binary PPM or PGM
+format, maxval 4095, when compiled with BITS_IN_JSAMPLE=12.  Since this
+format is not yet widely supported, you can disable it by compiling wrppm.c
+with PPM_NORAWWORD defined; then the data is scaled down to 8 bits to make a
+standard 1-byte/sample PPM or PGM file.  (Yes, this means still another copy
+of djpeg to keep around.  But hopefully you won't need it for very long.
+Poskanzer's supposed to get that new PBMPLUS release out Real Soon Now.)
+
+Of course, if you are working with 12-bit data, you probably have it stored
+in some other, nonstandard format.  In that case you'll probably want to
+write your own I/O modules to read and write your format.
+
+Note that a 12-bit version of cjpeg always runs in "-optimize" mode, in
+order to generate valid Huffman tables.  This is necessary because our
+default Huffman tables only cover 8-bit data.
+
+Removing code:
+
+If you need to make a smaller version of the JPEG software, some optional
+functions can be removed at compile time.  See the xxx_SUPPORTED #defines in
+jconfig.h and jmorecfg.h.  If at all possible, we recommend that you leave in
+decoder support for all valid JPEG files, to ensure that you can read anyone's
+output.  Taking out support for image file formats that you don't use is the
+most painless way to make the programs smaller.  Another possibility is to
+remove some of the DCT methods: in particular, the "IFAST" method may not be
+enough faster than the others to be worth keeping on your machine.  (If you
+do remove ISLOW or IFAST, be sure to redefine JDCT_DEFAULT or JDCT_FASTEST
+to a supported method, by adding a #define in jconfig.h.)
+
+
+OPTIMIZATION
+============
+
+Unless you own a Cray, you'll probably be interested in making the JPEG
+software go as fast as possible.  This section covers some machine-dependent
+optimizations you may want to try.  We suggest that before trying any of
+this, you first get the basic installation to pass the self-test step.
+Repeat the self-test after any optimization to make sure that you haven't
+broken anything.
+
+The integer DCT routines perform a lot of multiplications.  These
+multiplications must yield 32-bit results, but none of their input values
+are more than 16 bits wide.  On many machines, notably the 680x0 and 80x86
+CPUs, a 16x16=>32 bit multiply instruction is faster than a full 32x32=>32
+bit multiply.  Unfortunately there is no portable way to specify such a
+multiplication in C, but some compilers can generate one when you use the
+right combination of casts.  See the MULTIPLYxxx macro definitions in
+jdct.h.  If your compiler makes "int" be 32 bits and "short" be 16 bits,
+defining SHORTxSHORT_32 is fairly likely to work.  When experimenting with
+alternate definitions, be sure to test not only whether the code still works
+(use the self-test), but also whether it is actually faster --- on some
+compilers, alternate definitions may compute the right answer, yet be slower
+than the default.  Timing cjpeg on a large PGM (grayscale) input file is the
+best way to check this, as the DCT will be the largest fraction of the runtime
+in that mode.  (Note: some of the distributed compiler-specific jconfig files
+already contain #define switches to select appropriate MULTIPLYxxx
+definitions.)
+
+If your machine has sufficiently fast floating point hardware, you may find
+that the float DCT method is faster than the integer DCT methods, even
+after tweaking the integer multiply macros.  In that case you may want to
+make the float DCT be the default method.  (The only objection to this is
+that float DCT results may vary slightly across machines.)  To do that, add
+"#define JDCT_DEFAULT JDCT_FLOAT" to jconfig.h.  Even if you don't change
+the default, you should redefine JDCT_FASTEST, which is the method selected
+by djpeg's -fast switch.  Don't forget to update the documentation files
+(usage.txt and/or cjpeg.1, djpeg.1) to agree with what you've done.
+
+If access to "short" arrays is slow on your machine, it may be a win to
+define type JCOEF as int rather than short.  This will cost a good deal of
+memory though, particularly in some multi-pass modes, so don't do it unless
+you have memory to burn and short is REALLY slow.
+
+If your compiler can compile function calls in-line, make sure the INLINE
+macro in jmorecfg.h is defined as the keyword that marks a function
+inline-able.  Some compilers have a switch that tells the compiler to inline
+any function it thinks is profitable (e.g., -finline-functions for gcc).
+Enabling such a switch is likely to make the compiled code bigger but faster.
+
+In general, it's worth trying the maximum optimization level of your compiler,
+and experimenting with any optional optimizations such as loop unrolling.
+(Unfortunately, far too many compilers have optimizer bugs ... be prepared to
+back off if the code fails self-test.)  If you do any experimentation along
+these lines, please report the optimal settings to jpeg-info@jpegclub.org so
+we can mention them in future releases.  Be sure to specify your machine and
+compiler version.
+
+
+HINTS FOR SPECIFIC SYSTEMS
+==========================
+
+We welcome reports on changes needed for systems not mentioned here.  Submit
+'em to jpeg-info@jpegclub.org.  Also, if configure or ckconfig.c is wrong
+about how to configure the JPEG software for your system, please let us know.
+
+
+Acorn RISC OS:
+
+(Thanks to Simon Middleton for these hints on compiling with Desktop C.)
+After renaming the files according to Acorn conventions, take a copy of
+makefile.ansi, change all occurrences of 'libjpeg.a' to 'libjpeg.o' and
+change these definitions as indicated:
+
+CFLAGS= -throwback -IC: -Wn
+LDLIBS=C:o.Stubs
+SYSDEPMEM=jmemansi.o
+LN=Link
+AR=LibFile -c -o
+
+Also add a new line '.c.o:; $(cc) $< $(cflags) -c -o $@'.  Remove the
+lines '$(RM) libjpeg.o' and '$(AR2) libjpeg.o' and the 'jconfig.h'
+dependency section.
+
+Copy jconfig.txt to jconfig.h.  Edit jconfig.h to define TWO_FILE_COMMANDLINE
+and CHAR_IS_UNSIGNED.
+
+Run the makefile using !AMU not !Make.  If you want to use the 'clean' and
+'test' makefile entries then you will have to fiddle with the syntax a bit
+and rename the test files.
+
+
+Amiga:
+
+SAS C 6.50 reportedly is too buggy to compile the IJG code properly.
+A patch to update to 6.51 is available from SAS or AmiNet FTP sites.
+
+The supplied config files are set up to use jmemname.c as the memory
+manager, with temporary files being created on the device named by
+"JPEGTMP:".
+
+
+Atari ST/STE/TT:
+
+Copy the project files makcjpeg.st, makdjpeg.st, maktjpeg.st, and makljpeg.st
+to cjpeg.prj, djpeg.prj, jpegtran.prj, and libjpeg.prj respectively.  The
+project files should work as-is with Pure C.  For Turbo C, change library
+filenames "pc..." to "tc..." in each project file.  Note that libjpeg.prj
+selects jmemansi.c as the recommended memory manager.  You'll probably want to
+adjust the DEFAULT_MAX_MEM setting --- you want it to be a couple hundred K
+less than your normal free memory.  Put "#define DEFAULT_MAX_MEM nnnn" into
+jconfig.h to do this.
+
+To use the 68881/68882 coprocessor for the floating point DCT, add the
+compiler option "-8" to the project files and replace pcfltlib.lib with
+pc881lib.lib in cjpeg.prj and djpeg.prj.  Or if you don't have a
+coprocessor, you may prefer to remove the float DCT code by undefining
+DCT_FLOAT_SUPPORTED in jmorecfg.h (since without a coprocessor, the float
+code will be too slow to be useful).  In that case, you can delete
+pcfltlib.lib from the project files.
+
+Note that you must make libjpeg.lib before making cjpeg.ttp, djpeg.ttp,
+or jpegtran.ttp.  You'll have to perform the self-test by hand.
+
+We haven't bothered to include project files for rdjpgcom and wrjpgcom.
+Those source files should just be compiled by themselves; they don't
+depend on the JPEG library.  You can use the default.prj project file
+of the Pure C distribution to make the programs.
+
+There is a bug in some older versions of the Turbo C library which causes the
+space used by temporary files created with "tmpfile()" not to be freed after
+an abnormal program exit.  If you check your disk afterwards, you will find
+cluster chains that are allocated but not used by a file.  This should not
+happen in cjpeg/djpeg/jpegtran, since we enable a signal catcher to explicitly
+close temp files before exiting.  But if you use the JPEG library with your
+own code, be sure to supply a signal catcher, or else use a different
+system-dependent memory manager.
+
+
+Cray:
+
+Should you be so fortunate as to be running JPEG on a Cray YMP, there is a
+compiler bug in old versions of Cray's Standard C (prior to 3.1).  If you
+still have an old compiler, you'll need to insert a line reading
+"#pragma novector" just before the loop	
+    for (i = 1; i <= (int) htbl->bits[l]; i++)
+      huffsize[p++] = (char) l;
+in fix_huff_tbl (in V5beta1, line 204 of jchuff.c and line 176 of jdhuff.c).
+[This bug may or may not still occur with the current IJG code, but it's
+probably a dead issue anyway...]
+
+
+HP-UX:
+
+If you have HP-UX 7.05 or later with the "software development" C compiler,
+you should run the compiler in ANSI mode.  If using the configure script,
+say
+	./configure CC='cc -Aa'
+(or -Ae if you prefer).  If configuring by hand, use makefile.ansi and add
+"-Aa" to the CFLAGS line in the makefile.
+
+If you have a pre-7.05 system, or if you are using the non-ANSI C compiler
+delivered with a minimum HP-UX system, then you must use makefile.unix
+(and do NOT add -Aa); or just run configure without the CC option.
+
+On HP 9000 series 800 machines, the HP C compiler is buggy in revisions prior
+to A.08.07.  If you get complaints about "not a typedef name", you'll have to
+use makefile.unix, or run configure without the CC option.
+
+
+Macintosh, generic comments:
+
+The supplied user-interface files (cjpeg.c, djpeg.c, etc) are set up to
+provide a Unix-style command line interface.  You can use this interface on
+the Mac by means of the ccommand() library routine provided by Metrowerks
+CodeWarrior or Think C.  This is only appropriate for testing the library,
+however; to make a user-friendly equivalent of cjpeg/djpeg you'd really want
+to develop a Mac-style user interface.  There isn't a complete example
+available at the moment, but there are some helpful starting points:
+1. Sam Bushell's free "To JPEG" applet provides drag-and-drop conversion to
+JPEG under System 7 and later.  This only illustrates how to use the
+compression half of the library, but it does a very nice job of that part.
+The CodeWarrior source code is available from http://www.pobox.com/~jsam.
+2. Jim Brunner prepared a Mac-style user interface for both compression and
+decompression.  Unfortunately, it hasn't been updated since IJG v4, and
+the library's API has changed considerably since then.  Still it may be of
+some help, particularly as a guide to compiling the IJG code under Think C.
+Jim's code is available from the Info-Mac archives, at sumex-aim.stanford.edu
+or mirrors thereof; see file /info-mac/dev/src/jpeg-convert-c.hqx.
+
+jmemmac.c is the recommended memory manager back end for Macintosh.  It uses
+NewPtr/DisposePtr instead of malloc/free, and has a Mac-specific
+implementation of jpeg_mem_available().  It also creates temporary files that
+follow Mac conventions.  (That part of the code relies on System-7-or-later OS
+functions.  See the comments in jmemmac.c if you need to run it on System 6.)
+NOTE that USE_MAC_MEMMGR must be defined in jconfig.h to use jmemmac.c.
+
+You can also use jmemnobs.c, if you don't care about handling images larger
+than available memory.  If you use any memory manager back end other than
+jmemmac.c, we recommend replacing "malloc" and "free" by "NewPtr" and
+"DisposePtr", because Mac C libraries often have peculiar implementations of
+malloc/free.  (For instance, free() may not return the freed space to the
+Mac Memory Manager.  This is undesirable for the IJG code because jmemmgr.c
+already clumps space requests.)
+
+
+Macintosh, Metrowerks CodeWarrior:
+
+The Unix-command-line-style interface can be used by defining USE_CCOMMAND.
+You'll also need to define TWO_FILE_COMMANDLINE to avoid stdin/stdout.
+This means that when using the cjpeg/djpeg programs, you'll have to type the
+input and output file names in the "Arguments" text-edit box, rather than
+using the file radio buttons.  (Perhaps USE_FDOPEN or USE_SETMODE would
+eliminate the problem, but I haven't heard from anyone who's tried it.)
+
+On 680x0 Macs, Metrowerks defines type "double" as a 10-byte IEEE extended
+float.  jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power
+of 2.  Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint.
+
+The supplied configuration file jconfig.mac can be used for your jconfig.h;
+it includes all the recommended symbol definitions.  If you have AppleScript
+installed, you can run the supplied script makeproj.mac to create CodeWarrior
+project files for the library and the testbed applications, then build the
+library and applications.  (Thanks to Dan Sears and Don Agro for this nifty
+hack, which saves us from trying to maintain CodeWarrior project files as part
+of the IJG distribution...)
+
+
+Macintosh, Think C:
+
+The documentation in Jim Brunner's "JPEG Convert" source code (see above)
+includes detailed build instructions for Think C; it's probably somewhat
+out of date for the current release, but may be helpful.
+
+If you want to build the minimal command line version, proceed as follows.
+You'll have to prepare project files for the programs; we don't include any
+in the distribution since they are not text files.  Use the file lists in
+any of the supplied makefiles as a guide.  Also add the ANSI and Unix C
+libraries in a separate segment.  You may need to divide the JPEG files into
+more than one segment; we recommend dividing compression and decompression
+modules.  Define USE_CCOMMAND in jconfig.h so that the ccommand() routine is
+called.  You must also define TWO_FILE_COMMANDLINE because stdin/stdout
+don't handle binary data correctly.
+
+On 680x0 Macs, Think C defines type "double" as a 12-byte IEEE extended float.
+jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power of 2.
+Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint.
+
+jconfig.mac should work as a jconfig.h configuration file for Think C,
+but the makeproj.mac AppleScript script is specific to CodeWarrior.  Sorry.
+
+
+MIPS R3000:
+
+MIPS's cc version 1.31 has a rather nasty optimization bug.  Don't use -O
+if you have that compiler version.  (Use "cc -V" to check the version.)
+Note that the R3000 chip is found in workstations from DEC and others.
+
+
+MS-DOS, generic comments for 16-bit compilers:
+
+The IJG code is designed to work well in 80x86 "small" or "medium" memory
+models (i.e., data pointers are 16 bits unless explicitly declared "far";
+code pointers can be either size).  You may be able to use small model to
+compile cjpeg or djpeg by itself, but you will probably have to use medium
+model for any larger application.  This won't make much difference in
+performance.  You *will* take a noticeable performance hit if you use a
+large-data memory model, and you should avoid "huge" model if at all
+possible.  Be sure that NEED_FAR_POINTERS is defined in jconfig.h if you use
+a small-data memory model; be sure it is NOT defined if you use a large-data
+model.  (The supplied makefiles and jconfig files for Borland and Microsoft C
+compile in medium model and define NEED_FAR_POINTERS.)
+
+The DOS-specific memory manager, jmemdos.c, should be used if possible.
+It needs some assembly-code routines which are in jmemdosa.asm; make sure
+your makefile assembles that file and includes it in the library.  If you
+don't have a suitable assembler, you can get pre-assembled object files for
+jmemdosa by FTP from ftp.uu.net:/graphics/jpeg/jdosaobj.zip.  (DOS-oriented
+distributions of the IJG source code often include these object files.)
+
+When using jmemdos.c, jconfig.h must define USE_MSDOS_MEMMGR and must set
+MAX_ALLOC_CHUNK to less than 64K (65520L is a typical value).  If your
+C library's far-heap malloc() can't allocate blocks that large, reduce
+MAX_ALLOC_CHUNK to whatever it can handle.
+
+If you can't use jmemdos.c for some reason --- for example, because you
+don't have an assembler to assemble jmemdosa.asm --- you'll have to fall
+back to jmemansi.c or jmemname.c.  You'll probably still need to set
+MAX_ALLOC_CHUNK in jconfig.h, because most DOS C libraries won't malloc()
+more than 64K at a time.  IMPORTANT: if you use jmemansi.c or jmemname.c,
+you will have to compile in a large-data memory model in order to get the
+right stdio library.  Too bad.
+
+wrjpgcom needs to be compiled in large model, because it malloc()s a 64KB
+work area to hold the comment text.  If your C library's malloc can't
+handle that, reduce MAX_COM_LENGTH as necessary in wrjpgcom.c.
+
+Most MS-DOS compilers treat stdin/stdout as text files, so you must use
+two-file command line style.  But if your compiler has either fdopen() or
+setmode(), you can use one-file style if you like.  To do this, define
+USE_SETMODE or USE_FDOPEN so that stdin/stdout will be set to binary mode.
+(USE_SETMODE seems to work with more DOS compilers than USE_FDOPEN.)  You
+should test that I/O through stdin/stdout produces the same results as I/O
+to explicitly named files... the "make test" procedures in the supplied
+makefiles do NOT use stdin/stdout.
+
+
+MS-DOS, generic comments for 32-bit compilers:
+
+None of the above comments about memory models apply if you are using a
+32-bit flat-memory-space environment, such as DJGPP or Watcom C.  (And you
+should use one if you have it, as performance will be much better than
+8086-compatible code!)  For flat-memory-space compilers, do NOT define
+NEED_FAR_POINTERS, and do NOT use jmemdos.c.  Use jmemnobs.c if the
+environment supplies adequate virtual memory, otherwise use jmemansi.c or
+jmemname.c.
+
+You'll still need to be careful about binary I/O through stdin/stdout.
+See the last paragraph of the previous section.
+
+
+MS-DOS, Borland C:
+
+Be sure to convert all the source files to DOS text format (CR/LF newlines).
+Although Borland C will often work OK with unmodified Unix (LF newlines)
+source files, sometimes it will give bogus compile errors.
+"Illegal character '#'" is the most common such error.  (This is true with
+Borland C 3.1, but perhaps is fixed in newer releases.)
+
+If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE.
+jconfig.bcc already includes #define USE_SETMODE to make this work.
+(fdopen does not work correctly.)
+
+
+MS-DOS, Microsoft C:
+
+makefile.mc6 works with Microsoft C, DOS Visual C++, etc.  It should only
+be used if you want to build a 16-bit (small or medium memory model) program.
+
+If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE.
+jconfig.mc6 already includes #define USE_SETMODE to make this work.
+(fdopen does not work correctly.)
+
+Note that this makefile assumes that the working copy of itself is called
+"makefile".  If you want to call it something else, say "makefile.mak",
+be sure to adjust the dependency line that reads "$(RFILE) : makefile".
+Otherwise the make will fail because it doesn't know how to create "makefile".
+Worse, some releases of Microsoft's make utilities give an incorrect error
+message in this situation.
+
+Old versions of MS C fail with an "out of macro expansion space" error
+because they can't cope with the macro TRACEMS8 (defined in jerror.h).
+If this happens to you, the easiest solution is to change TRACEMS8 to
+expand to nothing.  You'll lose the ability to dump out JPEG coefficient
+tables with djpeg -debug -debug, but at least you can compile.
+
+Original MS C 6.0 is very buggy; it compiles incorrect code unless you turn
+off optimization entirely (remove -O from CFLAGS).  6.00A is better, but it
+still generates bad code if you enable loop optimizations (-Ol or -Ox).
+
+MS C 8.0 crashes when compiling jquant1.c with optimization switch /Oo ...
+which is on by default.  To work around this bug, compile that one file
+with /Oo-.
+
+
+Microsoft Windows (all versions), generic comments:
+
+Some Windows system include files define typedef boolean as "unsigned char".
+The IJG code also defines typedef boolean, but we make it "int" by default.
+This doesn't affect the IJG programs because we don't import those Windows
+include files.  But if you use the JPEG library in your own program, and some
+of your program's files import one definition of boolean while some import the
+other, you can get all sorts of mysterious problems.  A good preventive step
+is to make the IJG library use "unsigned char" for boolean.  To do that,
+add something like this to your jconfig.h file:
+	/* Define "boolean" as unsigned char, not int, per Windows custom */
+	#ifndef __RPCNDR_H__	/* don't conflict if rpcndr.h already read */
+	typedef unsigned char boolean;
+	#endif
+	#define HAVE_BOOLEAN	/* prevent jmorecfg.h from redefining it */
+(This is already in jconfig.vc, by the way.)
+
+windef.h contains the declarations
+	#define far
+	#define FAR far
+Since jmorecfg.h tries to define FAR as empty, you may get a compiler
+warning if you include both jpeglib.h and windef.h (which windows.h
+includes).  To suppress the warning, you can put "#ifndef FAR"/"#endif"
+around the line "#define FAR" in jmorecfg.h.
+(Something like this is already in jmorecfg.h, by the way.)
+
+When using the library in a Windows application, you will almost certainly
+want to modify or replace the error handler module jerror.c, since our
+default error handler does a couple of inappropriate things:
+  1. it tries to write error and warning messages on stderr;
+  2. in event of a fatal error, it exits by calling exit().
+
+A simple stopgap solution for problem 1 is to replace the line
+	fprintf(stderr, "%s\n", buffer);
+(in output_message in jerror.c) with
+	MessageBox(GetActiveWindow(),buffer,"JPEG Error",MB_OK|MB_ICONERROR);
+It's highly recommended that you at least do that much, since otherwise
+error messages will disappear into nowhere.  (Beginning with IJG v6b, this
+code is already present in jerror.c; just define USE_WINDOWS_MESSAGEBOX in
+jconfig.h to enable it.)
+
+The proper solution for problem 2 is to return control to your calling
+application after a library error.  This can be done with the setjmp/longjmp
+technique discussed in libjpeg.txt and illustrated in example.c.  (NOTE:
+some older Windows C compilers provide versions of setjmp/longjmp that
+don't actually work under Windows.  You may need to use the Windows system
+functions Catch and Throw instead.)
+
+The recommended memory manager under Windows is jmemnobs.c; in other words,
+let Windows do any virtual memory management needed.  You should NOT use
+jmemdos.c nor jmemdosa.asm under Windows.
+
+For Windows 3.1, we recommend compiling in medium or large memory model;
+for newer Windows versions, use a 32-bit flat memory model.  (See the MS-DOS
+sections above for more info about memory models.)  In the 16-bit memory
+models only, you'll need to put
+	#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
+into jconfig.h to limit allocation chunks to 64Kb.  (Without that, you'd
+have to use huge memory model, which slows things down unnecessarily.)
+jmemnobs.c works without modification in large or flat memory models, but to
+use medium model, you need to modify its jpeg_get_large and jpeg_free_large
+routines to allocate far memory.  In any case, you might like to replace
+its calls to malloc and free with direct calls on Windows memory allocation
+functions.
+
+You may also want to modify jdatasrc.c and jdatadst.c to use Windows file
+operations rather than fread/fwrite.  This is only necessary if your C
+compiler doesn't provide a competent implementation of C stdio functions.
+
+You might want to tweak the RGB_xxx macros in jmorecfg.h so that the library
+will accept or deliver color pixels in BGR sample order, not RGB; BGR order
+is usually more convenient under Windows.  Note that this change will break
+the sample applications cjpeg/djpeg, but the library itself works fine.
+
+
+Many people want to convert the IJG library into a DLL.  This is reasonably
+straightforward, but watch out for the following:
+
+  1. Don't try to compile as a DLL in small or medium memory model; use
+large model, or even better, 32-bit flat model.  Many places in the IJG code
+assume the address of a local variable is an ordinary (not FAR) pointer;
+that isn't true in a medium-model DLL.
+
+  2. Microsoft C cannot pass file pointers between applications and DLLs.
+(See Microsoft Knowledge Base, PSS ID Number Q50336.)  So jdatasrc.c and
+jdatadst.c don't work if you open a file in your application and then pass
+the pointer to the DLL.  One workaround is to make jdatasrc.c/jdatadst.c
+part of your main application rather than part of the DLL.
+
+  3. You'll probably need to modify the macros GLOBAL() and EXTERN() to
+attach suitable linkage keywords to the exported routine names.  Similarly,
+you'll want to modify METHODDEF() and JMETHOD() to ensure function pointers
+are declared in a way that lets application routines be called back through
+the function pointers.  These macros are in jmorecfg.h.  Typical definitions
+for a 16-bit DLL are:
+	#define GLOBAL(type)		type _far _pascal _loadds _export
+	#define EXTERN(type)		extern type _far _pascal _loadds
+	#define METHODDEF(type)		static type _far _pascal
+	#define JMETHOD(type,methodname,arglist)  \
+		type (_far _pascal *methodname) arglist
+For a 32-bit DLL you may want something like
+	#define GLOBAL(type)		__declspec(dllexport) type
+	#define EXTERN(type)		extern __declspec(dllexport) type
+Although not all the GLOBAL routines are actually intended to be called by
+the application, the performance cost of making them all DLL entry points is
+negligible.
+
+The unmodified IJG library presents a very C-specific application interface,
+so the resulting DLL is only usable from C or C++ applications.  There has
+been some talk of writing wrapper code that would present a simpler interface
+usable from other languages, such as Visual Basic.  This is on our to-do list
+but hasn't been very high priority --- any volunteers out there?
+
+
+Microsoft Windows, Borland C:
+
+The provided jconfig.bcc should work OK in a 32-bit Windows environment,
+but you'll need to tweak it in a 16-bit environment (you'd need to define
+NEED_FAR_POINTERS and MAX_ALLOC_CHUNK).  Beware that makefile.bcc will need
+alteration if you want to use it for Windows --- in particular, you should
+use jmemnobs.c not jmemdos.c under Windows.
+
+Borland C++ 4.5 fails with an internal compiler error when trying to compile
+jdmerge.c in 32-bit mode.  If enough people complain, perhaps Borland will fix
+it.  In the meantime, the simplest known workaround is to add a redundant
+definition of the variable range_limit in h2v1_merged_upsample(), at the head
+of the block that handles odd image width (about line 268 in v6 jdmerge.c):
+  /* If image width is odd, do the last output column separately */
+  if (cinfo->output_width & 1) {
+    register JSAMPLE * range_limit = cinfo->sample_range_limit; /* ADD THIS */
+    cb = GETJSAMPLE(*inptr1);
+Pretty bizarre, especially since the very similar routine h2v2_merged_upsample
+doesn't trigger the bug.
+Recent reports suggest that this bug does not occur with "bcc32a" (the
+Pentium-optimized version of the compiler).
+
+Another report from a user of Borland C 4.5 was that incorrect code (leading
+to a color shift in processed images) was produced if any of the following
+optimization switch combinations were used: 
+	-Ot -Og
+	-Ot -Op
+	-Ot -Om
+So try backing off on optimization if you see such a problem.  (Are there
+several different releases all numbered "4.5"??)
+
+
+Microsoft Windows, Microsoft Visual C++:
+
+jconfig.vc should work OK with any Microsoft compiler for a 32-bit memory
+model.  makefile.vc is intended for command-line use.  (If you are using
+the Developer Studio environment, you may prefer the DevStudio project
+files; see below.)
+
+IJG JPEG 7 adds extern "C" to jpeglib.h.  This avoids the need to put
+extern "C" { ... } around #include "jpeglib.h" in your C++ application.
+You can also force VC++ to treat the library as C++ code by renaming
+all the *.c files to *.cpp (and adjusting the makefile to match).
+In this case you also need to define the symbol DONT_USE_EXTERN_C in
+the configuration to prevent jpeglib.h from using extern "C".
+
+
+Microsoft Windows, Microsoft Visual C++ 6 Developer Studio:
+
+We include makefiles that should work as project files in DevStudio 6.0 or
+later.  There is a library makefile that builds the IJG library as a static
+Win32 library, and application makefiles that build the sample applications
+as Win32 console applications.  (Even if you only want the library, we
+recommend building the applications so that you can run the self-test.)
+
+To use:
+1. Open the command prompt, change to the main directory and execute the
+   command line
+	NMAKE /f makefile.vc  setup-vc6
+   This will move jconfig.vc to jconfig.h and makefiles to project files.
+   (Note that the renaming is critical!)
+2. Open the workspace file jpeg.dsw, build the library project.
+   (If you are using DevStudio more recent than 6.0, you'll probably
+   get a message saying that the project files are being updated.)
+3. Open the workspace file apps.dsw, build the application projects.
+4. To perform the self-test, execute the command line
+	NMAKE /f makefile.vc  test-build
+5. Move the application .exe files from `app`\Release to an
+   appropriate location on your path.
+
+
+Microsoft Windows, Microsoft Visual C++ 2010 Developer Studio (v10):
+
+We include makefiles that should work as project files in Visual Studio
+2010 or later.  There is a library makefile that builds the IJG library
+as a static Win32 library, and application makefiles that build the sample
+applications as Win32 console applications.  (Even if you only want the
+library, we recommend building the applications so that you can run the
+self-test.)
+
+To use:
+1. Open the command prompt, change to the main directory and execute the
+   command line
+	NMAKE /f makefile.vc  setup-v10
+   This will move jconfig.vc to jconfig.h and makefiles to project files.
+   (Note that the renaming is critical!)
+2. Open the solution file jpeg.sln, build the library project.
+   (If you are using Visual Studio more recent than 2010 (v10), you'll
+   probably get a message saying that the project files are being updated.)
+3. Open the solution file apps.sln, build the application projects.
+4. To perform the self-test, execute the command line
+	NMAKE /f makefile.vc  test-build
+5. Move the application .exe files from `app`\Release to an
+   appropriate location on your path.
+
+Note:
+There seems to be an optimization bug in the compiler which causes the
+self-test to fail with the color quantization option.
+We have disabled optimization for the file jquant2.c in the library
+project file which causes the self-test to pass properly.
+
+
+OS/2, Borland C++:
+
+Watch out for optimization bugs in older Borland compilers; you may need
+to back off the optimization switch settings.  See the comments in
+makefile.bcc.
+
+
+SGI:
+
+On some SGI systems, you may need to set "AR2= ar -ts" in the Makefile.
+If you are using configure, you can do this by saying
+	./configure RANLIB='ar -ts'
+This change is not needed on all SGIs.  Use it only if the make fails at the
+stage of linking the completed programs.
+
+On the MIPS R4000 architecture (Indy, etc.), the compiler option "-mips2"
+reportedly speeds up the float DCT method substantially, enough to make it
+faster than the default int method (but still slower than the fast int
+method).  If you use -mips2, you may want to alter the default DCT method to
+be float.  To do this, put "#define JDCT_DEFAULT JDCT_FLOAT" in jconfig.h.
+
+
+VMS:
+
+On an Alpha/VMS system with MMS, be sure to use the "/Marco=Alpha=1"
+qualifier with MMS when building the JPEG package.
+
+VAX/VMS v5.5-1 may have problems with the test step of the build procedure
+reporting differences when it compares the original and test images.  If the
+error points to the last block of the files, it is most likely bogus and may
+be safely ignored.  It seems to be because the files are Stream_LF and
+Backup/Compare has difficulty with the (presumably) null padded files.
+This problem was not observed on VAX/VMS v6.1 or AXP/VMS v6.1.
diff --git a/jpeg-8d/jaricom.c b/jpeg-8d/jaricom.c
new file mode 100644
index 0000000..6900688
--- /dev/null
+++ b/jpeg-8d/jaricom.c
@@ -0,0 +1,153 @@
+/*
+ * jaricom.c
+ *
+ * Developed 1997-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains probability estimation tables for common use in
+ * arithmetic entropy encoding and decoding routines.
+ *
+ * This data represents Table D.3 in the JPEG spec (D.2 in the draft),
+ * ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81, and Table 24
+ * in the JBIG spec, ISO/IEC IS 11544 and CCITT Recommendation ITU-T T.82.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+/* The following #define specifies the packing of the four components
+ * into the compact INT32 representation.
+ * Note that this formula must match the actual arithmetic encoder
+ * and decoder implementation.  The implementation has to be changed
+ * if this formula is changed.
+ * The current organization is leaned on Markus Kuhn's JBIG
+ * implementation (jbig_tab.c).
+ */
+
+#define V(i,a,b,c,d) (((INT32)a << 16) | ((INT32)c << 8) | ((INT32)d << 7) | b)
+
+const INT32 jpeg_aritab[113+1] = {
+/*
+ * Index, Qe_Value, Next_Index_LPS, Next_Index_MPS, Switch_MPS
+ */
+  V(   0, 0x5a1d,   1,   1, 1 ),
+  V(   1, 0x2586,  14,   2, 0 ),
+  V(   2, 0x1114,  16,   3, 0 ),
+  V(   3, 0x080b,  18,   4, 0 ),
+  V(   4, 0x03d8,  20,   5, 0 ),
+  V(   5, 0x01da,  23,   6, 0 ),
+  V(   6, 0x00e5,  25,   7, 0 ),
+  V(   7, 0x006f,  28,   8, 0 ),
+  V(   8, 0x0036,  30,   9, 0 ),
+  V(   9, 0x001a,  33,  10, 0 ),
+  V(  10, 0x000d,  35,  11, 0 ),
+  V(  11, 0x0006,   9,  12, 0 ),
+  V(  12, 0x0003,  10,  13, 0 ),
+  V(  13, 0x0001,  12,  13, 0 ),
+  V(  14, 0x5a7f,  15,  15, 1 ),
+  V(  15, 0x3f25,  36,  16, 0 ),
+  V(  16, 0x2cf2,  38,  17, 0 ),
+  V(  17, 0x207c,  39,  18, 0 ),
+  V(  18, 0x17b9,  40,  19, 0 ),
+  V(  19, 0x1182,  42,  20, 0 ),
+  V(  20, 0x0cef,  43,  21, 0 ),
+  V(  21, 0x09a1,  45,  22, 0 ),
+  V(  22, 0x072f,  46,  23, 0 ),
+  V(  23, 0x055c,  48,  24, 0 ),
+  V(  24, 0x0406,  49,  25, 0 ),
+  V(  25, 0x0303,  51,  26, 0 ),
+  V(  26, 0x0240,  52,  27, 0 ),
+  V(  27, 0x01b1,  54,  28, 0 ),
+  V(  28, 0x0144,  56,  29, 0 ),
+  V(  29, 0x00f5,  57,  30, 0 ),
+  V(  30, 0x00b7,  59,  31, 0 ),
+  V(  31, 0x008a,  60,  32, 0 ),
+  V(  32, 0x0068,  62,  33, 0 ),
+  V(  33, 0x004e,  63,  34, 0 ),
+  V(  34, 0x003b,  32,  35, 0 ),
+  V(  35, 0x002c,  33,   9, 0 ),
+  V(  36, 0x5ae1,  37,  37, 1 ),
+  V(  37, 0x484c,  64,  38, 0 ),
+  V(  38, 0x3a0d,  65,  39, 0 ),
+  V(  39, 0x2ef1,  67,  40, 0 ),
+  V(  40, 0x261f,  68,  41, 0 ),
+  V(  41, 0x1f33,  69,  42, 0 ),
+  V(  42, 0x19a8,  70,  43, 0 ),
+  V(  43, 0x1518,  72,  44, 0 ),
+  V(  44, 0x1177,  73,  45, 0 ),
+  V(  45, 0x0e74,  74,  46, 0 ),
+  V(  46, 0x0bfb,  75,  47, 0 ),
+  V(  47, 0x09f8,  77,  48, 0 ),
+  V(  48, 0x0861,  78,  49, 0 ),
+  V(  49, 0x0706,  79,  50, 0 ),
+  V(  50, 0x05cd,  48,  51, 0 ),
+  V(  51, 0x04de,  50,  52, 0 ),
+  V(  52, 0x040f,  50,  53, 0 ),
+  V(  53, 0x0363,  51,  54, 0 ),
+  V(  54, 0x02d4,  52,  55, 0 ),
+  V(  55, 0x025c,  53,  56, 0 ),
+  V(  56, 0x01f8,  54,  57, 0 ),
+  V(  57, 0x01a4,  55,  58, 0 ),
+  V(  58, 0x0160,  56,  59, 0 ),
+  V(  59, 0x0125,  57,  60, 0 ),
+  V(  60, 0x00f6,  58,  61, 0 ),
+  V(  61, 0x00cb,  59,  62, 0 ),
+  V(  62, 0x00ab,  61,  63, 0 ),
+  V(  63, 0x008f,  61,  32, 0 ),
+  V(  64, 0x5b12,  65,  65, 1 ),
+  V(  65, 0x4d04,  80,  66, 0 ),
+  V(  66, 0x412c,  81,  67, 0 ),
+  V(  67, 0x37d8,  82,  68, 0 ),
+  V(  68, 0x2fe8,  83,  69, 0 ),
+  V(  69, 0x293c,  84,  70, 0 ),
+  V(  70, 0x2379,  86,  71, 0 ),
+  V(  71, 0x1edf,  87,  72, 0 ),
+  V(  72, 0x1aa9,  87,  73, 0 ),
+  V(  73, 0x174e,  72,  74, 0 ),
+  V(  74, 0x1424,  72,  75, 0 ),
+  V(  75, 0x119c,  74,  76, 0 ),
+  V(  76, 0x0f6b,  74,  77, 0 ),
+  V(  77, 0x0d51,  75,  78, 0 ),
+  V(  78, 0x0bb6,  77,  79, 0 ),
+  V(  79, 0x0a40,  77,  48, 0 ),
+  V(  80, 0x5832,  80,  81, 1 ),
+  V(  81, 0x4d1c,  88,  82, 0 ),
+  V(  82, 0x438e,  89,  83, 0 ),
+  V(  83, 0x3bdd,  90,  84, 0 ),
+  V(  84, 0x34ee,  91,  85, 0 ),
+  V(  85, 0x2eae,  92,  86, 0 ),
+  V(  86, 0x299a,  93,  87, 0 ),
+  V(  87, 0x2516,  86,  71, 0 ),
+  V(  88, 0x5570,  88,  89, 1 ),
+  V(  89, 0x4ca9,  95,  90, 0 ),
+  V(  90, 0x44d9,  96,  91, 0 ),
+  V(  91, 0x3e22,  97,  92, 0 ),
+  V(  92, 0x3824,  99,  93, 0 ),
+  V(  93, 0x32b4,  99,  94, 0 ),
+  V(  94, 0x2e17,  93,  86, 0 ),
+  V(  95, 0x56a8,  95,  96, 1 ),
+  V(  96, 0x4f46, 101,  97, 0 ),
+  V(  97, 0x47e5, 102,  98, 0 ),
+  V(  98, 0x41cf, 103,  99, 0 ),
+  V(  99, 0x3c3d, 104, 100, 0 ),
+  V( 100, 0x375e,  99,  93, 0 ),
+  V( 101, 0x5231, 105, 102, 0 ),
+  V( 102, 0x4c0f, 106, 103, 0 ),
+  V( 103, 0x4639, 107, 104, 0 ),
+  V( 104, 0x415e, 103,  99, 0 ),
+  V( 105, 0x5627, 105, 106, 1 ),
+  V( 106, 0x50e7, 108, 107, 0 ),
+  V( 107, 0x4b85, 109, 103, 0 ),
+  V( 108, 0x5597, 110, 109, 0 ),
+  V( 109, 0x504f, 111, 107, 0 ),
+  V( 110, 0x5a10, 110, 111, 1 ),
+  V( 111, 0x5522, 112, 109, 0 ),
+  V( 112, 0x59eb, 112, 111, 1 ),
+/*
+ * This last entry is used for fixed probability estimate of 0.5
+ * as suggested in Section 10.3 Table 5 of ITU-T Rec. T.851.
+ */
+  V( 113, 0x5a1d, 113, 113, 0 )
+};
diff --git a/jpeg-8d/jcapimin.c b/jpeg-8d/jcapimin.c
new file mode 100644
index 0000000..639ce86
--- /dev/null
+++ b/jpeg-8d/jcapimin.c
@@ -0,0 +1,288 @@
+/*
+ * jcapimin.c
+ *
+ * Copyright (C) 1994-1998, Thomas G. Lane.
+ * Modified 2003-2010 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains application interface code for the compression half
+ * of the JPEG library.  These are the "minimum" API routines that may be
+ * needed in either the normal full-compression case or the transcoding-only
+ * case.
+ *
+ * Most of the routines intended to be called directly by an application
+ * are in this file or in jcapistd.c.  But also see jcparam.c for
+ * parameter-setup helper routines, jcomapi.c for routines shared by
+ * compression and decompression, and jctrans.c for the transcoding case.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * Initialization of a JPEG compression object.
+ * The error manager must already be set up (in case memory manager fails).
+ */
+
+GLOBAL(void)
+jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize)
+{
+  int i;
+
+  /* Guard against version mismatches between library and caller. */
+  cinfo->mem = NULL;		/* so jpeg_destroy knows mem mgr not called */
+  if (version != JPEG_LIB_VERSION)
+    ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version);
+  if (structsize != SIZEOF(struct jpeg_compress_struct))
+    ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, 
+	     (int) SIZEOF(struct jpeg_compress_struct), (int) structsize);
+
+  /* For debugging purposes, we zero the whole master structure.
+   * But the application has already set the err pointer, and may have set
+   * client_data, so we have to save and restore those fields.
+   * Note: if application hasn't set client_data, tools like Purify may
+   * complain here.
+   */
+  {
+    struct jpeg_error_mgr * err = cinfo->err;
+    void * client_data = cinfo->client_data; /* ignore Purify complaint here */
+    MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct));
+    cinfo->err = err;
+    cinfo->client_data = client_data;
+  }
+  cinfo->is_decompressor = FALSE;
+
+  /* Initialize a memory manager instance for this object */
+  jinit_memory_mgr((j_common_ptr) cinfo);
+
+  /* Zero out pointers to permanent structures. */
+  cinfo->progress = NULL;
+  cinfo->dest = NULL;
+
+  cinfo->comp_info = NULL;
+
+  for (i = 0; i < NUM_QUANT_TBLS; i++) {
+    cinfo->quant_tbl_ptrs[i] = NULL;
+    cinfo->q_scale_factor[i] = 100;
+  }
+
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    cinfo->dc_huff_tbl_ptrs[i] = NULL;
+    cinfo->ac_huff_tbl_ptrs[i] = NULL;
+  }
+
+  /* Must do it here for emit_dqt in case jpeg_write_tables is used */
+  cinfo->block_size = DCTSIZE;
+  cinfo->natural_order = jpeg_natural_order;
+  cinfo->lim_Se = DCTSIZE2-1;
+
+  cinfo->script_space = NULL;
+
+  cinfo->input_gamma = 1.0;	/* in case application forgets */
+
+  /* OK, I'm ready */
+  cinfo->global_state = CSTATE_START;
+}
+
+
+/*
+ * Destruction of a JPEG compression object
+ */
+
+GLOBAL(void)
+jpeg_destroy_compress (j_compress_ptr cinfo)
+{
+  jpeg_destroy((j_common_ptr) cinfo); /* use common routine */
+}
+
+
+/*
+ * Abort processing of a JPEG compression operation,
+ * but don't destroy the object itself.
+ */
+
+GLOBAL(void)
+jpeg_abort_compress (j_compress_ptr cinfo)
+{
+  jpeg_abort((j_common_ptr) cinfo); /* use common routine */
+}
+
+
+/*
+ * Forcibly suppress or un-suppress all quantization and Huffman tables.
+ * Marks all currently defined tables as already written (if suppress)
+ * or not written (if !suppress).  This will control whether they get emitted
+ * by a subsequent jpeg_start_compress call.
+ *
+ * This routine is exported for use by applications that want to produce
+ * abbreviated JPEG datastreams.  It logically belongs in jcparam.c, but
+ * since it is called by jpeg_start_compress, we put it here --- otherwise
+ * jcparam.o would be linked whether the application used it or not.
+ */
+
+GLOBAL(void)
+jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress)
+{
+  int i;
+  JQUANT_TBL * qtbl;
+  JHUFF_TBL * htbl;
+
+  for (i = 0; i < NUM_QUANT_TBLS; i++) {
+    if ((qtbl = cinfo->quant_tbl_ptrs[i]) != NULL)
+      qtbl->sent_table = suppress;
+  }
+
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    if ((htbl = cinfo->dc_huff_tbl_ptrs[i]) != NULL)
+      htbl->sent_table = suppress;
+    if ((htbl = cinfo->ac_huff_tbl_ptrs[i]) != NULL)
+      htbl->sent_table = suppress;
+  }
+}
+
+
+/*
+ * Finish JPEG compression.
+ *
+ * If a multipass operating mode was selected, this may do a great deal of
+ * work including most of the actual output.
+ */
+
+GLOBAL(void)
+jpeg_finish_compress (j_compress_ptr cinfo)
+{
+  JDIMENSION iMCU_row;
+
+  if (cinfo->global_state == CSTATE_SCANNING ||
+      cinfo->global_state == CSTATE_RAW_OK) {
+    /* Terminate first pass */
+    if (cinfo->next_scanline < cinfo->image_height)
+      ERREXIT(cinfo, JERR_TOO_LITTLE_DATA);
+    (*cinfo->master->finish_pass) (cinfo);
+  } else if (cinfo->global_state != CSTATE_WRCOEFS)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  /* Perform any remaining passes */
+  while (! cinfo->master->is_last_pass) {
+    (*cinfo->master->prepare_for_pass) (cinfo);
+    for (iMCU_row = 0; iMCU_row < cinfo->total_iMCU_rows; iMCU_row++) {
+      if (cinfo->progress != NULL) {
+	cinfo->progress->pass_counter = (long) iMCU_row;
+	cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows;
+	(*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+      }
+      /* We bypass the main controller and invoke coef controller directly;
+       * all work is being done from the coefficient buffer.
+       */
+      if (! (*cinfo->coef->compress_data) (cinfo, (JSAMPIMAGE) NULL))
+	ERREXIT(cinfo, JERR_CANT_SUSPEND);
+    }
+    (*cinfo->master->finish_pass) (cinfo);
+  }
+  /* Write EOI, do final cleanup */
+  (*cinfo->marker->write_file_trailer) (cinfo);
+  (*cinfo->dest->term_destination) (cinfo);
+  /* We can use jpeg_abort to release memory and reset global_state */
+  jpeg_abort((j_common_ptr) cinfo);
+}
+
+
+/*
+ * Write a special marker.
+ * This is only recommended for writing COM or APPn markers.
+ * Must be called after jpeg_start_compress() and before
+ * first call to jpeg_write_scanlines() or jpeg_write_raw_data().
+ */
+
+GLOBAL(void)
+jpeg_write_marker (j_compress_ptr cinfo, int marker,
+		   const JOCTET *dataptr, unsigned int datalen)
+{
+  JMETHOD(void, write_marker_byte, (j_compress_ptr info, int val));
+
+  if (cinfo->next_scanline != 0 ||
+      (cinfo->global_state != CSTATE_SCANNING &&
+       cinfo->global_state != CSTATE_RAW_OK &&
+       cinfo->global_state != CSTATE_WRCOEFS))
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  (*cinfo->marker->write_marker_header) (cinfo, marker, datalen);
+  write_marker_byte = cinfo->marker->write_marker_byte;	/* copy for speed */
+  while (datalen--) {
+    (*write_marker_byte) (cinfo, *dataptr);
+    dataptr++;
+  }
+}
+
+/* Same, but piecemeal. */
+
+GLOBAL(void)
+jpeg_write_m_header (j_compress_ptr cinfo, int marker, unsigned int datalen)
+{
+  if (cinfo->next_scanline != 0 ||
+      (cinfo->global_state != CSTATE_SCANNING &&
+       cinfo->global_state != CSTATE_RAW_OK &&
+       cinfo->global_state != CSTATE_WRCOEFS))
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  (*cinfo->marker->write_marker_header) (cinfo, marker, datalen);
+}
+
+GLOBAL(void)
+jpeg_write_m_byte (j_compress_ptr cinfo, int val)
+{
+  (*cinfo->marker->write_marker_byte) (cinfo, val);
+}
+
+
+/*
+ * Alternate compression function: just write an abbreviated table file.
+ * Before calling this, all parameters and a data destination must be set up.
+ *
+ * To produce a pair of files containing abbreviated tables and abbreviated
+ * image data, one would proceed as follows:
+ *
+ *		initialize JPEG object
+ *		set JPEG parameters
+ *		set destination to table file
+ *		jpeg_write_tables(cinfo);
+ *		set destination to image file
+ *		jpeg_start_compress(cinfo, FALSE);
+ *		write data...
+ *		jpeg_finish_compress(cinfo);
+ *
+ * jpeg_write_tables has the side effect of marking all tables written
+ * (same as jpeg_suppress_tables(..., TRUE)).  Thus a subsequent start_compress
+ * will not re-emit the tables unless it is passed write_all_tables=TRUE.
+ */
+
+GLOBAL(void)
+jpeg_write_tables (j_compress_ptr cinfo)
+{
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  /* (Re)initialize error mgr and destination modules */
+  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
+  (*cinfo->dest->init_destination) (cinfo);
+  /* Initialize the marker writer ... bit of a crock to do it here. */
+  jinit_marker_writer(cinfo);
+  /* Write them tables! */
+  (*cinfo->marker->write_tables_only) (cinfo);
+  /* And clean up. */
+  (*cinfo->dest->term_destination) (cinfo);
+  /*
+   * In library releases up through v6a, we called jpeg_abort() here to free
+   * any working memory allocated by the destination manager and marker
+   * writer.  Some applications had a problem with that: they allocated space
+   * of their own from the library memory manager, and didn't want it to go
+   * away during write_tables.  So now we do nothing.  This will cause a
+   * memory leak if an app calls write_tables repeatedly without doing a full
+   * compression cycle or otherwise resetting the JPEG object.  However, that
+   * seems less bad than unexpectedly freeing memory in the normal case.
+   * An app that prefers the old behavior can call jpeg_abort for itself after
+   * each call to jpeg_write_tables().
+   */
+}
diff --git a/jpeg-8d/jcapistd.c b/jpeg-8d/jcapistd.c
new file mode 100644
index 0000000..c0320b1
--- /dev/null
+++ b/jpeg-8d/jcapistd.c
@@ -0,0 +1,161 @@
+/*
+ * jcapistd.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains application interface code for the compression half
+ * of the JPEG library.  These are the "standard" API routines that are
+ * used in the normal full-compression case.  They are not used by a
+ * transcoding-only application.  Note that if an application links in
+ * jpeg_start_compress, it will end up linking in the entire compressor.
+ * We thus must separate this file from jcapimin.c to avoid linking the
+ * whole compression library into a transcoder.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * Compression initialization.
+ * Before calling this, all parameters and a data destination must be set up.
+ *
+ * We require a write_all_tables parameter as a failsafe check when writing
+ * multiple datastreams from the same compression object.  Since prior runs
+ * will have left all the tables marked sent_table=TRUE, a subsequent run
+ * would emit an abbreviated stream (no tables) by default.  This may be what
+ * is wanted, but for safety's sake it should not be the default behavior:
+ * programmers should have to make a deliberate choice to emit abbreviated
+ * images.  Therefore the documentation and examples should encourage people
+ * to pass write_all_tables=TRUE; then it will take active thought to do the
+ * wrong thing.
+ */
+
+GLOBAL(void)
+jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables)
+{
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  if (write_all_tables)
+    jpeg_suppress_tables(cinfo, FALSE);	/* mark all tables to be written */
+
+  /* (Re)initialize error mgr and destination modules */
+  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
+  (*cinfo->dest->init_destination) (cinfo);
+  /* Perform master selection of active modules */
+  jinit_compress_master(cinfo);
+  /* Set up for the first pass */
+  (*cinfo->master->prepare_for_pass) (cinfo);
+  /* Ready for application to drive first pass through jpeg_write_scanlines
+   * or jpeg_write_raw_data.
+   */
+  cinfo->next_scanline = 0;
+  cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING);
+}
+
+
+/*
+ * Write some scanlines of data to the JPEG compressor.
+ *
+ * The return value will be the number of lines actually written.
+ * This should be less than the supplied num_lines only in case that
+ * the data destination module has requested suspension of the compressor,
+ * or if more than image_height scanlines are passed in.
+ *
+ * Note: we warn about excess calls to jpeg_write_scanlines() since
+ * this likely signals an application programmer error.  However,
+ * excess scanlines passed in the last valid call are *silently* ignored,
+ * so that the application need not adjust num_lines for end-of-image
+ * when using a multiple-scanline buffer.
+ */
+
+GLOBAL(JDIMENSION)
+jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines,
+		      JDIMENSION num_lines)
+{
+  JDIMENSION row_ctr, rows_left;
+
+  if (cinfo->global_state != CSTATE_SCANNING)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  if (cinfo->next_scanline >= cinfo->image_height)
+    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
+
+  /* Call progress monitor hook if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->pass_counter = (long) cinfo->next_scanline;
+    cinfo->progress->pass_limit = (long) cinfo->image_height;
+    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+  }
+
+  /* Give master control module another chance if this is first call to
+   * jpeg_write_scanlines.  This lets output of the frame/scan headers be
+   * delayed so that application can write COM, etc, markers between
+   * jpeg_start_compress and jpeg_write_scanlines.
+   */
+  if (cinfo->master->call_pass_startup)
+    (*cinfo->master->pass_startup) (cinfo);
+
+  /* Ignore any extra scanlines at bottom of image. */
+  rows_left = cinfo->image_height - cinfo->next_scanline;
+  if (num_lines > rows_left)
+    num_lines = rows_left;
+
+  row_ctr = 0;
+  (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines);
+  cinfo->next_scanline += row_ctr;
+  return row_ctr;
+}
+
+
+/*
+ * Alternate entry point to write raw data.
+ * Processes exactly one iMCU row per call, unless suspended.
+ */
+
+GLOBAL(JDIMENSION)
+jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data,
+		     JDIMENSION num_lines)
+{
+  JDIMENSION lines_per_iMCU_row;
+
+  if (cinfo->global_state != CSTATE_RAW_OK)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  if (cinfo->next_scanline >= cinfo->image_height) {
+    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
+    return 0;
+  }
+
+  /* Call progress monitor hook if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->pass_counter = (long) cinfo->next_scanline;
+    cinfo->progress->pass_limit = (long) cinfo->image_height;
+    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+  }
+
+  /* Give master control module another chance if this is first call to
+   * jpeg_write_raw_data.  This lets output of the frame/scan headers be
+   * delayed so that application can write COM, etc, markers between
+   * jpeg_start_compress and jpeg_write_raw_data.
+   */
+  if (cinfo->master->call_pass_startup)
+    (*cinfo->master->pass_startup) (cinfo);
+
+  /* Verify that at least one iMCU row has been passed. */
+  lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
+  if (num_lines < lines_per_iMCU_row)
+    ERREXIT(cinfo, JERR_BUFFER_SIZE);
+
+  /* Directly compress the row. */
+  if (! (*cinfo->coef->compress_data) (cinfo, data)) {
+    /* If compressor did not consume the whole row, suspend processing. */
+    return 0;
+  }
+
+  /* OK, we processed one iMCU row. */
+  cinfo->next_scanline += lines_per_iMCU_row;
+  return lines_per_iMCU_row;
+}
diff --git a/jpeg-8d/jcarith.c b/jpeg-8d/jcarith.c
new file mode 100644
index 0000000..033f670
--- /dev/null
+++ b/jpeg-8d/jcarith.c
@@ -0,0 +1,937 @@
+/*
+ * jcarith.c
+ *
+ * Developed 1997-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains portable arithmetic entropy encoding routines for JPEG
+ * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81).
+ *
+ * Both sequential and progressive modes are supported in this single module.
+ *
+ * Suspension is not currently supported in this module.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Expanded entropy encoder object for arithmetic encoding. */
+
+typedef struct {
+  struct jpeg_entropy_encoder pub; /* public fields */
+
+  INT32 c; /* C register, base of coding interval, layout as in sec. D.1.3 */
+  INT32 a;               /* A register, normalized size of coding interval */
+  INT32 sc;        /* counter for stacked 0xFF values which might overflow */
+  INT32 zc;          /* counter for pending 0x00 output values which might *
+                          * be discarded at the end ("Pacman" termination) */
+  int ct;  /* bit shift counter, determines when next byte will be written */
+  int buffer;                /* buffer for most recent output byte != 0xFF */
+
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+  int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */
+
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+  int next_restart_num;		/* next restart number to write (0-7) */
+
+  /* Pointers to statistics areas (these workspaces have image lifespan) */
+  unsigned char * dc_stats[NUM_ARITH_TBLS];
+  unsigned char * ac_stats[NUM_ARITH_TBLS];
+
+  /* Statistics bin for coding with fixed probability 0.5 */
+  unsigned char fixed_bin[4];
+} arith_entropy_encoder;
+
+typedef arith_entropy_encoder * arith_entropy_ptr;
+
+/* The following two definitions specify the allocation chunk size
+ * for the statistics area.
+ * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least
+ * 49 statistics bins for DC, and 245 statistics bins for AC coding.
+ *
+ * We use a compact representation with 1 byte per statistics bin,
+ * thus the numbers directly represent byte sizes.
+ * This 1 byte per statistics bin contains the meaning of the MPS
+ * (more probable symbol) in the highest bit (mask 0x80), and the
+ * index into the probability estimation state machine table
+ * in the lower bits (mask 0x7F).
+ */
+
+#define DC_STAT_BINS 64
+#define AC_STAT_BINS 256
+
+/* NOTE: Uncomment the following #define if you want to use the
+ * given formula for calculating the AC conditioning parameter Kx
+ * for spectral selection progressive coding in section G.1.3.2
+ * of the spec (Kx = Kmin + SRL (8 + Se - Kmin) 4).
+ * Although the spec and P&M authors claim that this "has proven
+ * to give good results for 8 bit precision samples", I'm not
+ * convinced yet that this is really beneficial.
+ * Early tests gave only very marginal compression enhancements
+ * (a few - around 5 or so - bytes even for very large files),
+ * which would turn out rather negative if we'd suppress the
+ * DAC (Define Arithmetic Conditioning) marker segments for
+ * the default parameters in the future.
+ * Note that currently the marker writing module emits 12-byte
+ * DAC segments for a full-component scan in a color image.
+ * This is not worth worrying about IMHO. However, since the
+ * spec defines the default values to be used if the tables
+ * are omitted (unlike Huffman tables, which are required
+ * anyway), one might optimize this behaviour in the future,
+ * and then it would be disadvantageous to use custom tables if
+ * they don't provide sufficient gain to exceed the DAC size.
+ *
+ * On the other hand, I'd consider it as a reasonable result
+ * that the conditioning has no significant influence on the
+ * compression performance. This means that the basic
+ * statistical model is already rather stable.
+ *
+ * Thus, at the moment, we use the default conditioning values
+ * anyway, and do not use the custom formula.
+ *
+#define CALCULATE_SPECTRAL_CONDITIONING
+ */
+
+/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32.
+ * We assume that int right shift is unsigned if INT32 right shift is,
+ * which should be safe.
+ */
+
+#ifdef RIGHT_SHIFT_IS_UNSIGNED
+#define ISHIFT_TEMPS	int ishift_temp;
+#define IRIGHT_SHIFT(x,shft)  \
+	((ishift_temp = (x)) < 0 ? \
+	 (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \
+	 (ishift_temp >> (shft)))
+#else
+#define ISHIFT_TEMPS
+#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
+#endif
+
+
+LOCAL(void)
+emit_byte (int val, j_compress_ptr cinfo)
+/* Write next output byte; we do not support suspension in this module. */
+{
+  struct jpeg_destination_mgr * dest = cinfo->dest;
+
+  *dest->next_output_byte++ = (JOCTET) val;
+  if (--dest->free_in_buffer == 0)
+    if (! (*dest->empty_output_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+}
+
+
+/*
+ * Finish up at the end of an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+finish_pass (j_compress_ptr cinfo)
+{
+  arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy;
+  INT32 temp;
+
+  /* Section D.1.8: Termination of encoding */
+
+  /* Find the e->c in the coding interval with the largest
+   * number of trailing zero bits */
+  if ((temp = (e->a - 1 + e->c) & 0xFFFF0000L) < e->c)
+    e->c = temp + 0x8000L;
+  else
+    e->c = temp;
+  /* Send remaining bytes to output */
+  e->c <<= e->ct;
+  if (e->c & 0xF8000000L) {
+    /* One final overflow has to be handled */
+    if (e->buffer >= 0) {
+      if (e->zc)
+	do emit_byte(0x00, cinfo);
+	while (--e->zc);
+      emit_byte(e->buffer + 1, cinfo);
+      if (e->buffer + 1 == 0xFF)
+	emit_byte(0x00, cinfo);
+    }
+    e->zc += e->sc;  /* carry-over converts stacked 0xFF bytes to 0x00 */
+    e->sc = 0;
+  } else {
+    if (e->buffer == 0)
+      ++e->zc;
+    else if (e->buffer >= 0) {
+      if (e->zc)
+	do emit_byte(0x00, cinfo);
+	while (--e->zc);
+      emit_byte(e->buffer, cinfo);
+    }
+    if (e->sc) {
+      if (e->zc)
+	do emit_byte(0x00, cinfo);
+	while (--e->zc);
+      do {
+	emit_byte(0xFF, cinfo);
+	emit_byte(0x00, cinfo);
+      } while (--e->sc);
+    }
+  }
+  /* Output final bytes only if they are not 0x00 */
+  if (e->c & 0x7FFF800L) {
+    if (e->zc)  /* output final pending zero bytes */
+      do emit_byte(0x00, cinfo);
+      while (--e->zc);
+    emit_byte((e->c >> 19) & 0xFF, cinfo);
+    if (((e->c >> 19) & 0xFF) == 0xFF)
+      emit_byte(0x00, cinfo);
+    if (e->c & 0x7F800L) {
+      emit_byte((e->c >> 11) & 0xFF, cinfo);
+      if (((e->c >> 11) & 0xFF) == 0xFF)
+	emit_byte(0x00, cinfo);
+    }
+  }
+}
+
+
+/*
+ * The core arithmetic encoding routine (common in JPEG and JBIG).
+ * This needs to go as fast as possible.
+ * Machine-dependent optimization facilities
+ * are not utilized in this portable implementation.
+ * However, this code should be fairly efficient and
+ * may be a good base for further optimizations anyway.
+ *
+ * Parameter 'val' to be encoded may be 0 or 1 (binary decision).
+ *
+ * Note: I've added full "Pacman" termination support to the
+ * byte output routines, which is equivalent to the optional
+ * Discard_final_zeros procedure (Figure D.15) in the spec.
+ * Thus, we always produce the shortest possible output
+ * stream compliant to the spec (no trailing zero bytes,
+ * except for FF stuffing).
+ *
+ * I've also introduced a new scheme for accessing
+ * the probability estimation state machine table,
+ * derived from Markus Kuhn's JBIG implementation.
+ */
+
+LOCAL(void)
+arith_encode (j_compress_ptr cinfo, unsigned char *st, int val) 
+{
+  register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy;
+  register unsigned char nl, nm;
+  register INT32 qe, temp;
+  register int sv;
+
+  /* Fetch values from our compact representation of Table D.3(D.2):
+   * Qe values and probability estimation state machine
+   */
+  sv = *st;
+  qe = jpeg_aritab[sv & 0x7F];	/* => Qe_Value */
+  nl = qe & 0xFF; qe >>= 8;	/* Next_Index_LPS + Switch_MPS */
+  nm = qe & 0xFF; qe >>= 8;	/* Next_Index_MPS */
+
+  /* Encode & estimation procedures per sections D.1.4 & D.1.5 */
+  e->a -= qe;
+  if (val != (sv >> 7)) {
+    /* Encode the less probable symbol */
+    if (e->a >= qe) {
+      /* If the interval size (qe) for the less probable symbol (LPS)
+       * is larger than the interval size for the MPS, then exchange
+       * the two symbols for coding efficiency, otherwise code the LPS
+       * as usual: */
+      e->c += e->a;
+      e->a = qe;
+    }
+    *st = (sv & 0x80) ^ nl;	/* Estimate_after_LPS */
+  } else {
+    /* Encode the more probable symbol */
+    if (e->a >= 0x8000L)
+      return;  /* A >= 0x8000 -> ready, no renormalization required */
+    if (e->a < qe) {
+      /* If the interval size (qe) for the less probable symbol (LPS)
+       * is larger than the interval size for the MPS, then exchange
+       * the two symbols for coding efficiency: */
+      e->c += e->a;
+      e->a = qe;
+    }
+    *st = (sv & 0x80) ^ nm;	/* Estimate_after_MPS */
+  }
+
+  /* Renormalization & data output per section D.1.6 */
+  do {
+    e->a <<= 1;
+    e->c <<= 1;
+    if (--e->ct == 0) {
+      /* Another byte is ready for output */
+      temp = e->c >> 19;
+      if (temp > 0xFF) {
+	/* Handle overflow over all stacked 0xFF bytes */
+	if (e->buffer >= 0) {
+	  if (e->zc)
+	    do emit_byte(0x00, cinfo);
+	    while (--e->zc);
+	  emit_byte(e->buffer + 1, cinfo);
+	  if (e->buffer + 1 == 0xFF)
+	    emit_byte(0x00, cinfo);
+	}
+	e->zc += e->sc;  /* carry-over converts stacked 0xFF bytes to 0x00 */
+	e->sc = 0;
+	/* Note: The 3 spacer bits in the C register guarantee
+	 * that the new buffer byte can't be 0xFF here
+	 * (see page 160 in the P&M JPEG book). */
+	e->buffer = temp & 0xFF;  /* new output byte, might overflow later */
+      } else if (temp == 0xFF) {
+	++e->sc;  /* stack 0xFF byte (which might overflow later) */
+      } else {
+	/* Output all stacked 0xFF bytes, they will not overflow any more */
+	if (e->buffer == 0)
+	  ++e->zc;
+	else if (e->buffer >= 0) {
+	  if (e->zc)
+	    do emit_byte(0x00, cinfo);
+	    while (--e->zc);
+	  emit_byte(e->buffer, cinfo);
+	}
+	if (e->sc) {
+	  if (e->zc)
+	    do emit_byte(0x00, cinfo);
+	    while (--e->zc);
+	  do {
+	    emit_byte(0xFF, cinfo);
+	    emit_byte(0x00, cinfo);
+	  } while (--e->sc);
+	}
+	e->buffer = temp & 0xFF;  /* new output byte (can still overflow) */
+      }
+      e->c &= 0x7FFFFL;
+      e->ct += 8;
+    }
+  } while (e->a < 0x8000L);
+}
+
+
+/*
+ * Emit a restart marker & resynchronize predictions.
+ */
+
+LOCAL(void)
+emit_restart (j_compress_ptr cinfo, int restart_num)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci;
+  jpeg_component_info * compptr;
+
+  finish_pass(cinfo);
+
+  emit_byte(0xFF, cinfo);
+  emit_byte(JPEG_RST0 + restart_num, cinfo);
+
+  /* Re-initialize statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* DC needs no table for refinement scan */
+    if (cinfo->Ss == 0 && cinfo->Ah == 0) {
+      MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS);
+      /* Reset DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    /* AC needs no table when not present */
+    if (cinfo->Se) {
+      MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS);
+    }
+  }
+
+  /* Reset arithmetic encoding variables */
+  entropy->c = 0;
+  entropy->a = 0x10000L;
+  entropy->sc = 0;
+  entropy->zc = 0;
+  entropy->ct = 11;
+  entropy->buffer = -1;  /* empty */
+}
+
+
+/*
+ * MCU encoding for DC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl;
+  int v, v2, m;
+  ISHIFT_TEMPS
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    tbl = cinfo->cur_comp_info[ci]->dc_tbl_no;
+
+    /* Compute the DC value after the required point transform by Al.
+     * This is simply an arithmetic right shift.
+     */
+    m = IRIGHT_SHIFT((int) ((*block)[0]), cinfo->Al);
+
+    /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.4: Encode_DC_DIFF */
+    if ((v = m - entropy->last_dc_val[ci]) == 0) {
+      arith_encode(cinfo, st, 0);
+      entropy->dc_context[ci] = 0;	/* zero diff category */
+    } else {
+      entropy->last_dc_val[ci] = m;
+      arith_encode(cinfo, st, 1);
+      /* Figure F.6: Encoding nonzero value v */
+      /* Figure F.7: Encoding the sign of v */
+      if (v > 0) {
+	arith_encode(cinfo, st + 1, 0);	/* Table F.4: SS = S0 + 1 */
+	st += 2;			/* Table F.4: SP = S0 + 2 */
+	entropy->dc_context[ci] = 4;	/* small positive diff category */
+      } else {
+	v = -v;
+	arith_encode(cinfo, st + 1, 1);	/* Table F.4: SS = S0 + 1 */
+	st += 3;			/* Table F.4: SN = S0 + 3 */
+	entropy->dc_context[ci] = 8;	/* small negative diff category */
+      }
+      /* Figure F.8: Encoding the magnitude category of v */
+      m = 0;
+      if (v -= 1) {
+	arith_encode(cinfo, st, 1);
+	m = 1;
+	v2 = v;
+	st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */
+	while (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st += 1;
+	}
+      }
+      arith_encode(cinfo, st, 0);
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;	/* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] += 8;	/* large diff category */
+      /* Figure F.9: Encoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	arith_encode(cinfo, st, (m & v) ? 1 : 0);
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for AC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, k, ke;
+  int v, v2, m;
+  const int * natural_order;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  natural_order = cinfo->natural_order;
+
+  /* Encode the MCU data block */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */
+
+  /* Establish EOB (end-of-block) index */
+  for (ke = cinfo->Se; ke > 0; ke--)
+    /* We must apply the point transform by Al.  For AC coefficients this
+     * is an integer division with rounding towards 0.  To do this portably
+     * in C, we shift after obtaining the absolute value.
+     */
+    if ((v = (*block)[natural_order[ke]]) >= 0) {
+      if (v >>= cinfo->Al) break;
+    } else {
+      v = -v;
+      if (v >>= cinfo->Al) break;
+    }
+
+  /* Figure F.5: Encode_AC_Coefficients */
+  for (k = cinfo->Ss; k <= ke; k++) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    arith_encode(cinfo, st, 0);		/* EOB decision */
+    for (;;) {
+      if ((v = (*block)[natural_order[k]]) >= 0) {
+	if (v >>= cinfo->Al) {
+	  arith_encode(cinfo, st + 1, 1);
+	  arith_encode(cinfo, entropy->fixed_bin, 0);
+	  break;
+	}
+      } else {
+	v = -v;
+	if (v >>= cinfo->Al) {
+	  arith_encode(cinfo, st + 1, 1);
+	  arith_encode(cinfo, entropy->fixed_bin, 1);
+	  break;
+	}
+      }
+      arith_encode(cinfo, st + 1, 0); st += 3; k++;
+    }
+    st += 2;
+    /* Figure F.8: Encoding the magnitude category of v */
+    m = 0;
+    if (v -= 1) {
+      arith_encode(cinfo, st, 1);
+      m = 1;
+      v2 = v;
+      if (v2 >>= 1) {
+	arith_encode(cinfo, st, 1);
+	m <<= 1;
+	st = entropy->ac_stats[tbl] +
+	     (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	while (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st += 1;
+	}
+      }
+    }
+    arith_encode(cinfo, st, 0);
+    /* Figure F.9: Encoding the magnitude bit pattern of v */
+    st += 14;
+    while (m >>= 1)
+      arith_encode(cinfo, st, (m & v) ? 1 : 0);
+  }
+  /* Encode EOB decision only if k <= cinfo->Se */
+  if (k <= cinfo->Se) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    arith_encode(cinfo, st, 1);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for DC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  unsigned char *st;
+  int Al, blkn;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  st = entropy->fixed_bin;	/* use fixed probability estimation */
+  Al = cinfo->Al;
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    /* We simply emit the Al'th bit of the DC coefficient value. */
+    arith_encode(cinfo, st, (MCU_data[blkn][0][0] >> Al) & 1);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for AC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, k, ke, kex;
+  int v;
+  const int * natural_order;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  natural_order = cinfo->natural_order;
+
+  /* Encode the MCU data block */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  /* Section G.1.3.3: Encoding of AC coefficients */
+
+  /* Establish EOB (end-of-block) index */
+  for (ke = cinfo->Se; ke > 0; ke--)
+    /* We must apply the point transform by Al.  For AC coefficients this
+     * is an integer division with rounding towards 0.  To do this portably
+     * in C, we shift after obtaining the absolute value.
+     */
+    if ((v = (*block)[natural_order[ke]]) >= 0) {
+      if (v >>= cinfo->Al) break;
+    } else {
+      v = -v;
+      if (v >>= cinfo->Al) break;
+    }
+
+  /* Establish EOBx (previous stage end-of-block) index */
+  for (kex = ke; kex > 0; kex--)
+    if ((v = (*block)[natural_order[kex]]) >= 0) {
+      if (v >>= cinfo->Ah) break;
+    } else {
+      v = -v;
+      if (v >>= cinfo->Ah) break;
+    }
+
+  /* Figure G.10: Encode_AC_Coefficients_SA */
+  for (k = cinfo->Ss; k <= ke; k++) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    if (k > kex)
+      arith_encode(cinfo, st, 0);	/* EOB decision */
+    for (;;) {
+      if ((v = (*block)[natural_order[k]]) >= 0) {
+	if (v >>= cinfo->Al) {
+	  if (v >> 1)			/* previously nonzero coef */
+	    arith_encode(cinfo, st + 2, (v & 1));
+	  else {			/* newly nonzero coef */
+	    arith_encode(cinfo, st + 1, 1);
+	    arith_encode(cinfo, entropy->fixed_bin, 0);
+	  }
+	  break;
+	}
+      } else {
+	v = -v;
+	if (v >>= cinfo->Al) {
+	  if (v >> 1)			/* previously nonzero coef */
+	    arith_encode(cinfo, st + 2, (v & 1));
+	  else {			/* newly nonzero coef */
+	    arith_encode(cinfo, st + 1, 1);
+	    arith_encode(cinfo, entropy->fixed_bin, 1);
+	  }
+	  break;
+	}
+      }
+      arith_encode(cinfo, st + 1, 0); st += 3; k++;
+    }
+  }
+  /* Encode EOB decision only if k <= cinfo->Se */
+  if (k <= cinfo->Se) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    arith_encode(cinfo, st, 1);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Encode and output one MCU's worth of arithmetic-compressed coefficients.
+ */
+
+METHODDEF(boolean)
+encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  jpeg_component_info * compptr;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl, k, ke;
+  int v, v2, m;
+  const int * natural_order;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  natural_order = cinfo->natural_order;
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+
+    /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */
+
+    tbl = compptr->dc_tbl_no;
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.4: Encode_DC_DIFF */
+    if ((v = (*block)[0] - entropy->last_dc_val[ci]) == 0) {
+      arith_encode(cinfo, st, 0);
+      entropy->dc_context[ci] = 0;	/* zero diff category */
+    } else {
+      entropy->last_dc_val[ci] = (*block)[0];
+      arith_encode(cinfo, st, 1);
+      /* Figure F.6: Encoding nonzero value v */
+      /* Figure F.7: Encoding the sign of v */
+      if (v > 0) {
+	arith_encode(cinfo, st + 1, 0);	/* Table F.4: SS = S0 + 1 */
+	st += 2;			/* Table F.4: SP = S0 + 2 */
+	entropy->dc_context[ci] = 4;	/* small positive diff category */
+      } else {
+	v = -v;
+	arith_encode(cinfo, st + 1, 1);	/* Table F.4: SS = S0 + 1 */
+	st += 3;			/* Table F.4: SN = S0 + 3 */
+	entropy->dc_context[ci] = 8;	/* small negative diff category */
+      }
+      /* Figure F.8: Encoding the magnitude category of v */
+      m = 0;
+      if (v -= 1) {
+	arith_encode(cinfo, st, 1);
+	m = 1;
+	v2 = v;
+	st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */
+	while (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st += 1;
+	}
+      }
+      arith_encode(cinfo, st, 0);
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;	/* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] += 8;	/* large diff category */
+      /* Figure F.9: Encoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	arith_encode(cinfo, st, (m & v) ? 1 : 0);
+    }
+
+    /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */
+
+    if ((ke = cinfo->lim_Se) == 0) continue;
+    tbl = compptr->ac_tbl_no;
+
+    /* Establish EOB (end-of-block) index */
+    do {
+      if ((*block)[natural_order[ke]]) break;
+    } while (--ke);
+
+    /* Figure F.5: Encode_AC_Coefficients */
+    for (k = 0; k < ke;) {
+      st = entropy->ac_stats[tbl] + 3 * k;
+      arith_encode(cinfo, st, 0);	/* EOB decision */
+      while ((v = (*block)[natural_order[++k]]) == 0) {
+	arith_encode(cinfo, st + 1, 0);
+	st += 3;
+      }
+      arith_encode(cinfo, st + 1, 1);
+      /* Figure F.6: Encoding nonzero value v */
+      /* Figure F.7: Encoding the sign of v */
+      if (v > 0) {
+	arith_encode(cinfo, entropy->fixed_bin, 0);
+      } else {
+	v = -v;
+	arith_encode(cinfo, entropy->fixed_bin, 1);
+      }
+      st += 2;
+      /* Figure F.8: Encoding the magnitude category of v */
+      m = 0;
+      if (v -= 1) {
+	arith_encode(cinfo, st, 1);
+	m = 1;
+	v2 = v;
+	if (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st = entropy->ac_stats[tbl] +
+	       (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	  while (v2 >>= 1) {
+	    arith_encode(cinfo, st, 1);
+	    m <<= 1;
+	    st += 1;
+	  }
+	}
+      }
+      arith_encode(cinfo, st, 0);
+      /* Figure F.9: Encoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	arith_encode(cinfo, st, (m & v) ? 1 : 0);
+    }
+    /* Encode EOB decision only if k < cinfo->lim_Se */
+    if (k < cinfo->lim_Se) {
+      st = entropy->ac_stats[tbl] + 3 * k;
+      arith_encode(cinfo, st, 1);
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Initialize for an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+start_pass (j_compress_ptr cinfo, boolean gather_statistics)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci, tbl;
+  jpeg_component_info * compptr;
+
+  if (gather_statistics)
+    /* Make sure to avoid that in the master control logic!
+     * We are fully adaptive here and need no extra
+     * statistics gathering pass!
+     */
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+
+  /* We assume jcmaster.c already validated the progressive scan parameters. */
+
+  /* Select execution routines */
+  if (cinfo->progressive_mode) {
+    if (cinfo->Ah == 0) {
+      if (cinfo->Ss == 0)
+	entropy->pub.encode_mcu = encode_mcu_DC_first;
+      else
+	entropy->pub.encode_mcu = encode_mcu_AC_first;
+    } else {
+      if (cinfo->Ss == 0)
+	entropy->pub.encode_mcu = encode_mcu_DC_refine;
+      else
+	entropy->pub.encode_mcu = encode_mcu_AC_refine;
+    }
+  } else
+    entropy->pub.encode_mcu = encode_mcu;
+
+  /* Allocate & initialize requested statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* DC needs no table for refinement scan */
+    if (cinfo->Ss == 0 && cinfo->Ah == 0) {
+      tbl = compptr->dc_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->dc_stats[tbl] == NULL)
+	entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS);
+      MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS);
+      /* Initialize DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    /* AC needs no table when not present */
+    if (cinfo->Se) {
+      tbl = compptr->ac_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->ac_stats[tbl] == NULL)
+	entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS);
+      MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS);
+#ifdef CALCULATE_SPECTRAL_CONDITIONING
+      if (cinfo->progressive_mode)
+	/* Section G.1.3.2: Set appropriate arithmetic conditioning value Kx */
+	cinfo->arith_ac_K[tbl] = cinfo->Ss + ((8 + cinfo->Se - cinfo->Ss) >> 4);
+#endif
+    }
+  }
+
+  /* Initialize arithmetic encoding variables */
+  entropy->c = 0;
+  entropy->a = 0x10000L;
+  entropy->sc = 0;
+  entropy->zc = 0;
+  entropy->ct = 11;
+  entropy->buffer = -1;  /* empty */
+
+  /* Initialize restart stuff */
+  entropy->restarts_to_go = cinfo->restart_interval;
+  entropy->next_restart_num = 0;
+}
+
+
+/*
+ * Module initialization routine for arithmetic entropy encoding.
+ */
+
+GLOBAL(void)
+jinit_arith_encoder (j_compress_ptr cinfo)
+{
+  arith_entropy_ptr entropy;
+  int i;
+
+  entropy = (arith_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(arith_entropy_encoder));
+  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
+  entropy->pub.start_pass = start_pass;
+  entropy->pub.finish_pass = finish_pass;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_ARITH_TBLS; i++) {
+    entropy->dc_stats[i] = NULL;
+    entropy->ac_stats[i] = NULL;
+  }
+
+  /* Initialize index for fixed probability estimation */
+  entropy->fixed_bin[0] = 113;
+}
diff --git a/jpeg-8d/jccoefct.c b/jpeg-8d/jccoefct.c
new file mode 100644
index 0000000..924a703
--- /dev/null
+++ b/jpeg-8d/jccoefct.c
@@ -0,0 +1,454 @@
+/*
+ * jccoefct.c
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 2003-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the coefficient buffer controller for compression.
+ * This controller is the top level of the JPEG compressor proper.
+ * The coefficient buffer lies between forward-DCT and entropy encoding steps.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* We use a full-image coefficient buffer when doing Huffman optimization,
+ * and also for writing multiple-scan JPEG files.  In all cases, the DCT
+ * step is run during the first pass, and subsequent passes need only read
+ * the buffered coefficients.
+ */
+#ifdef ENTROPY_OPT_SUPPORTED
+#define FULL_COEF_BUFFER_SUPPORTED
+#else
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+#define FULL_COEF_BUFFER_SUPPORTED
+#endif
+#endif
+
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_c_coef_controller pub; /* public fields */
+
+  JDIMENSION iMCU_row_num;	/* iMCU row # within image */
+  JDIMENSION mcu_ctr;		/* counts MCUs processed in current row */
+  int MCU_vert_offset;		/* counts MCU rows within iMCU row */
+  int MCU_rows_per_iMCU_row;	/* number of such rows needed */
+
+  /* For single-pass compression, it's sufficient to buffer just one MCU
+   * (although this may prove a bit slow in practice).  We allocate a
+   * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each
+   * MCU constructed and sent.  (On 80x86, the workspace is FAR even though
+   * it's not really very big; this is to keep the module interfaces unchanged
+   * when a large coefficient buffer is necessary.)
+   * In multi-pass modes, this array points to the current MCU's blocks
+   * within the virtual arrays.
+   */
+  JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU];
+
+  /* In multi-pass modes, we need a virtual block array for each component. */
+  jvirt_barray_ptr whole_image[MAX_COMPONENTS];
+} my_coef_controller;
+
+typedef my_coef_controller * my_coef_ptr;
+
+
+/* Forward declarations */
+METHODDEF(boolean) compress_data
+    JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
+#ifdef FULL_COEF_BUFFER_SUPPORTED
+METHODDEF(boolean) compress_first_pass
+    JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
+METHODDEF(boolean) compress_output
+    JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
+#endif
+
+
+LOCAL(void)
+start_iMCU_row (j_compress_ptr cinfo)
+/* Reset within-iMCU-row counters for a new row */
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+
+  /* In an interleaved scan, an MCU row is the same as an iMCU row.
+   * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
+   * But at the bottom of the image, process only what's left.
+   */
+  if (cinfo->comps_in_scan > 1) {
+    coef->MCU_rows_per_iMCU_row = 1;
+  } else {
+    if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1))
+      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
+    else
+      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
+  }
+
+  coef->mcu_ctr = 0;
+  coef->MCU_vert_offset = 0;
+}
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF(void)
+start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+
+  coef->iMCU_row_num = 0;
+  start_iMCU_row(cinfo);
+
+  switch (pass_mode) {
+  case JBUF_PASS_THRU:
+    if (coef->whole_image[0] != NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    coef->pub.compress_data = compress_data;
+    break;
+#ifdef FULL_COEF_BUFFER_SUPPORTED
+  case JBUF_SAVE_AND_PASS:
+    if (coef->whole_image[0] == NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    coef->pub.compress_data = compress_first_pass;
+    break;
+  case JBUF_CRANK_DEST:
+    if (coef->whole_image[0] == NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    coef->pub.compress_data = compress_output;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    break;
+  }
+}
+
+
+/*
+ * Process some data in the single-pass case.
+ * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
+ * per call, ie, v_samp_factor block rows for each component in the image.
+ * Returns TRUE if the iMCU row is completed, FALSE if suspended.
+ *
+ * NB: input_buf contains a plane for each component in image,
+ * which we index according to the component's SOF position.
+ */
+
+METHODDEF(boolean)
+compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION MCU_col_num;	/* index of current MCU within row */
+  JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  int blkn, bi, ci, yindex, yoffset, blockcnt;
+  JDIMENSION ypos, xpos;
+  jpeg_component_info *compptr;
+  forward_DCT_ptr forward_DCT;
+
+  /* Loop to write as much as one whole iMCU row */
+  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
+       yoffset++) {
+    for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col;
+	 MCU_col_num++) {
+      /* Determine where data comes from in input_buf and do the DCT thing.
+       * Each call on forward_DCT processes a horizontal row of DCT blocks
+       * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks
+       * sequentially.  Dummy blocks at the right or bottom edge are filled in
+       * specially.  The data in them does not matter for image reconstruction,
+       * so we fill them with values that will encode to the smallest amount of
+       * data, viz: all zeroes in the AC entries, DC entries equal to previous
+       * block's DC value.  (Thanks to Thomas Kinsman for this idea.)
+       */
+      blkn = 0;
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+	compptr = cinfo->cur_comp_info[ci];
+	forward_DCT = cinfo->fdct->forward_DCT[compptr->component_index];
+	blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
+						: compptr->last_col_width;
+	xpos = MCU_col_num * compptr->MCU_sample_width;
+	ypos = yoffset * compptr->DCT_v_scaled_size;
+	/* ypos == (yoffset+yindex) * DCTSIZE */
+	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+	  if (coef->iMCU_row_num < last_iMCU_row ||
+	      yoffset+yindex < compptr->last_row_height) {
+	    (*forward_DCT) (cinfo, compptr,
+			    input_buf[compptr->component_index],
+			    coef->MCU_buffer[blkn],
+			    ypos, xpos, (JDIMENSION) blockcnt);
+	    if (blockcnt < compptr->MCU_width) {
+	      /* Create some dummy blocks at the right edge of the image. */
+	      FMEMZERO((void FAR *) coef->MCU_buffer[blkn + blockcnt],
+		       (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK));
+	      for (bi = blockcnt; bi < compptr->MCU_width; bi++) {
+		coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0];
+	      }
+	    }
+	  } else {
+	    /* Create a row of dummy blocks at the bottom of the image. */
+	    FMEMZERO((void FAR *) coef->MCU_buffer[blkn],
+		     compptr->MCU_width * SIZEOF(JBLOCK));
+	    for (bi = 0; bi < compptr->MCU_width; bi++) {
+	      coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0];
+	    }
+	  }
+	  blkn += compptr->MCU_width;
+	  ypos += compptr->DCT_v_scaled_size;
+	}
+      }
+      /* Try to write the MCU.  In event of a suspension failure, we will
+       * re-DCT the MCU on restart (a bit inefficient, could be fixed...)
+       */
+      if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) {
+	/* Suspension forced; update state counters and exit */
+	coef->MCU_vert_offset = yoffset;
+	coef->mcu_ctr = MCU_col_num;
+	return FALSE;
+      }
+    }
+    /* Completed an MCU row, but perhaps not an iMCU row */
+    coef->mcu_ctr = 0;
+  }
+  /* Completed the iMCU row, advance counters for next one */
+  coef->iMCU_row_num++;
+  start_iMCU_row(cinfo);
+  return TRUE;
+}
+
+
+#ifdef FULL_COEF_BUFFER_SUPPORTED
+
+/*
+ * Process some data in the first pass of a multi-pass case.
+ * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
+ * per call, ie, v_samp_factor block rows for each component in the image.
+ * This amount of data is read from the source buffer, DCT'd and quantized,
+ * and saved into the virtual arrays.  We also generate suitable dummy blocks
+ * as needed at the right and lower edges.  (The dummy blocks are constructed
+ * in the virtual arrays, which have been padded appropriately.)  This makes
+ * it possible for subsequent passes not to worry about real vs. dummy blocks.
+ *
+ * We must also emit the data to the entropy encoder.  This is conveniently
+ * done by calling compress_output() after we've loaded the current strip
+ * of the virtual arrays.
+ *
+ * NB: input_buf contains a plane for each component in image.  All
+ * components are DCT'd and loaded into the virtual arrays in this pass.
+ * However, it may be that only a subset of the components are emitted to
+ * the entropy encoder during this first pass; be careful about looking
+ * at the scan-dependent variables (MCU dimensions, etc).
+ */
+
+METHODDEF(boolean)
+compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  JDIMENSION blocks_across, MCUs_across, MCUindex;
+  int bi, ci, h_samp_factor, block_row, block_rows, ndummy;
+  JCOEF lastDC;
+  jpeg_component_info *compptr;
+  JBLOCKARRAY buffer;
+  JBLOCKROW thisblockrow, lastblockrow;
+  forward_DCT_ptr forward_DCT;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Align the virtual buffer for this component. */
+    buffer = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr) cinfo, coef->whole_image[ci],
+       coef->iMCU_row_num * compptr->v_samp_factor,
+       (JDIMENSION) compptr->v_samp_factor, TRUE);
+    /* Count non-dummy DCT block rows in this iMCU row. */
+    if (coef->iMCU_row_num < last_iMCU_row)
+      block_rows = compptr->v_samp_factor;
+    else {
+      /* NB: can't use last_row_height here, since may not be set! */
+      block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
+      if (block_rows == 0) block_rows = compptr->v_samp_factor;
+    }
+    blocks_across = compptr->width_in_blocks;
+    h_samp_factor = compptr->h_samp_factor;
+    /* Count number of dummy blocks to be added at the right margin. */
+    ndummy = (int) (blocks_across % h_samp_factor);
+    if (ndummy > 0)
+      ndummy = h_samp_factor - ndummy;
+    forward_DCT = cinfo->fdct->forward_DCT[ci];
+    /* Perform DCT for all non-dummy blocks in this iMCU row.  Each call
+     * on forward_DCT processes a complete horizontal row of DCT blocks.
+     */
+    for (block_row = 0; block_row < block_rows; block_row++) {
+      thisblockrow = buffer[block_row];
+      (*forward_DCT) (cinfo, compptr, input_buf[ci], thisblockrow,
+		      (JDIMENSION) (block_row * compptr->DCT_v_scaled_size),
+		      (JDIMENSION) 0, blocks_across);
+      if (ndummy > 0) {
+	/* Create dummy blocks at the right edge of the image. */
+	thisblockrow += blocks_across; /* => first dummy block */
+	FMEMZERO((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK));
+	lastDC = thisblockrow[-1][0];
+	for (bi = 0; bi < ndummy; bi++) {
+	  thisblockrow[bi][0] = lastDC;
+	}
+      }
+    }
+    /* If at end of image, create dummy block rows as needed.
+     * The tricky part here is that within each MCU, we want the DC values
+     * of the dummy blocks to match the last real block's DC value.
+     * This squeezes a few more bytes out of the resulting file...
+     */
+    if (coef->iMCU_row_num == last_iMCU_row) {
+      blocks_across += ndummy;	/* include lower right corner */
+      MCUs_across = blocks_across / h_samp_factor;
+      for (block_row = block_rows; block_row < compptr->v_samp_factor;
+	   block_row++) {
+	thisblockrow = buffer[block_row];
+	lastblockrow = buffer[block_row-1];
+	FMEMZERO((void FAR *) thisblockrow,
+		 (size_t) (blocks_across * SIZEOF(JBLOCK)));
+	for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) {
+	  lastDC = lastblockrow[h_samp_factor-1][0];
+	  for (bi = 0; bi < h_samp_factor; bi++) {
+	    thisblockrow[bi][0] = lastDC;
+	  }
+	  thisblockrow += h_samp_factor; /* advance to next MCU in row */
+	  lastblockrow += h_samp_factor;
+	}
+      }
+    }
+  }
+  /* NB: compress_output will increment iMCU_row_num if successful.
+   * A suspension return will result in redoing all the work above next time.
+   */
+
+  /* Emit data to the entropy encoder, sharing code with subsequent passes */
+  return compress_output(cinfo, input_buf);
+}
+
+
+/*
+ * Process some data in subsequent passes of a multi-pass case.
+ * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
+ * per call, ie, v_samp_factor block rows for each component in the scan.
+ * The data is obtained from the virtual arrays and fed to the entropy coder.
+ * Returns TRUE if the iMCU row is completed, FALSE if suspended.
+ *
+ * NB: input_buf is ignored; it is likely to be a NULL pointer.
+ */
+
+METHODDEF(boolean)
+compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION MCU_col_num;	/* index of current MCU within row */
+  int blkn, ci, xindex, yindex, yoffset;
+  JDIMENSION start_col;
+  JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
+  JBLOCKROW buffer_ptr;
+  jpeg_component_info *compptr;
+
+  /* Align the virtual buffers for the components used in this scan.
+   * NB: during first pass, this is safe only because the buffers will
+   * already be aligned properly, so jmemmgr.c won't need to do any I/O.
+   */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    buffer[ci] = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
+       coef->iMCU_row_num * compptr->v_samp_factor,
+       (JDIMENSION) compptr->v_samp_factor, FALSE);
+  }
+
+  /* Loop to process one whole iMCU row */
+  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
+       yoffset++) {
+    for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row;
+	 MCU_col_num++) {
+      /* Construct list of pointers to DCT blocks belonging to this MCU */
+      blkn = 0;			/* index of current DCT block within MCU */
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+	compptr = cinfo->cur_comp_info[ci];
+	start_col = MCU_col_num * compptr->MCU_width;
+	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+	  buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
+	  for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
+	    coef->MCU_buffer[blkn++] = buffer_ptr++;
+	  }
+	}
+      }
+      /* Try to write the MCU. */
+      if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) {
+	/* Suspension forced; update state counters and exit */
+	coef->MCU_vert_offset = yoffset;
+	coef->mcu_ctr = MCU_col_num;
+	return FALSE;
+      }
+    }
+    /* Completed an MCU row, but perhaps not an iMCU row */
+    coef->mcu_ctr = 0;
+  }
+  /* Completed the iMCU row, advance counters for next one */
+  coef->iMCU_row_num++;
+  start_iMCU_row(cinfo);
+  return TRUE;
+}
+
+#endif /* FULL_COEF_BUFFER_SUPPORTED */
+
+
+/*
+ * Initialize coefficient buffer controller.
+ */
+
+GLOBAL(void)
+jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer)
+{
+  my_coef_ptr coef;
+
+  coef = (my_coef_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_coef_controller));
+  cinfo->coef = (struct jpeg_c_coef_controller *) coef;
+  coef->pub.start_pass = start_pass_coef;
+
+  /* Create the coefficient buffer. */
+  if (need_full_buffer) {
+#ifdef FULL_COEF_BUFFER_SUPPORTED
+    /* Allocate a full-image virtual array for each component, */
+    /* padded to a multiple of samp_factor DCT blocks in each direction. */
+    int ci;
+    jpeg_component_info *compptr;
+
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      coef->whole_image[ci] = (*cinfo->mem->request_virt_barray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+	 (JDIMENSION) jround_up((long) compptr->width_in_blocks,
+				(long) compptr->h_samp_factor),
+	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
+				(long) compptr->v_samp_factor),
+	 (JDIMENSION) compptr->v_samp_factor);
+    }
+#else
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+#endif
+  } else {
+    /* We only need a single-MCU buffer. */
+    JBLOCKROW buffer;
+    int i;
+
+    buffer = (JBLOCKROW)
+      (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
+    for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) {
+      coef->MCU_buffer[i] = buffer + i;
+    }
+    coef->whole_image[0] = NULL; /* flag for no virtual arrays */
+  }
+}
diff --git a/jpeg-8d/jccolor.c b/jpeg-8d/jccolor.c
new file mode 100644
index 0000000..3e2d0e9
--- /dev/null
+++ b/jpeg-8d/jccolor.c
@@ -0,0 +1,490 @@
+/*
+ * jccolor.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains input colorspace conversion routines.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Private subobject */
+
+typedef struct {
+  struct jpeg_color_converter pub; /* public fields */
+
+  /* Private state for RGB->YCC conversion */
+  INT32 * rgb_ycc_tab;		/* => table for RGB to YCbCr conversion */
+} my_color_converter;
+
+typedef my_color_converter * my_cconvert_ptr;
+
+
+/**************** RGB -> YCbCr conversion: most common case **************/
+
+/*
+ * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
+ * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
+ * The conversion equations to be implemented are therefore
+ *	Y  =  0.29900 * R + 0.58700 * G + 0.11400 * B
+ *	Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B  + CENTERJSAMPLE
+ *	Cr =  0.50000 * R - 0.41869 * G - 0.08131 * B  + CENTERJSAMPLE
+ * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
+ * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2,
+ * rather than CENTERJSAMPLE, for Cb and Cr.  This gave equal positive and
+ * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0)
+ * were not represented exactly.  Now we sacrifice exact representation of
+ * maximum red and maximum blue in order to get exact grayscales.
+ *
+ * To avoid floating-point arithmetic, we represent the fractional constants
+ * as integers scaled up by 2^16 (about 4 digits precision); we have to divide
+ * the products by 2^16, with appropriate rounding, to get the correct answer.
+ *
+ * For even more speed, we avoid doing any multiplications in the inner loop
+ * by precalculating the constants times R,G,B for all possible values.
+ * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
+ * for 12-bit samples it is still acceptable.  It's not very reasonable for
+ * 16-bit samples, but if you want lossless storage you shouldn't be changing
+ * colorspace anyway.
+ * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included
+ * in the tables to save adding them separately in the inner loop.
+ */
+
+#define SCALEBITS	16	/* speediest right-shift on some machines */
+#define CBCR_OFFSET	((INT32) CENTERJSAMPLE << SCALEBITS)
+#define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
+#define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
+
+/* We allocate one big table and divide it up into eight parts, instead of
+ * doing eight alloc_small requests.  This lets us use a single table base
+ * address, which can be held in a register in the inner loops on many
+ * machines (more than can hold all eight addresses, anyway).
+ */
+
+#define R_Y_OFF		0			/* offset to R => Y section */
+#define G_Y_OFF		(1*(MAXJSAMPLE+1))	/* offset to G => Y section */
+#define B_Y_OFF		(2*(MAXJSAMPLE+1))	/* etc. */
+#define R_CB_OFF	(3*(MAXJSAMPLE+1))
+#define G_CB_OFF	(4*(MAXJSAMPLE+1))
+#define B_CB_OFF	(5*(MAXJSAMPLE+1))
+#define R_CR_OFF	B_CB_OFF		/* B=>Cb, R=>Cr are the same */
+#define G_CR_OFF	(6*(MAXJSAMPLE+1))
+#define B_CR_OFF	(7*(MAXJSAMPLE+1))
+#define TABLE_SIZE	(8*(MAXJSAMPLE+1))
+
+
+/*
+ * Initialize for RGB->YCC colorspace conversion.
+ */
+
+METHODDEF(void)
+rgb_ycc_start (j_compress_ptr cinfo)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  INT32 * rgb_ycc_tab;
+  INT32 i;
+
+  /* Allocate and fill in the conversion tables. */
+  cconvert->rgb_ycc_tab = rgb_ycc_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(TABLE_SIZE * SIZEOF(INT32)));
+
+  for (i = 0; i <= MAXJSAMPLE; i++) {
+    rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i;
+    rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i;
+    rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i     + ONE_HALF;
+    rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i;
+    rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i;
+    /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr.
+     * This ensures that the maximum output will round to MAXJSAMPLE
+     * not MAXJSAMPLE+1, and thus that we don't have to range-limit.
+     */
+    rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i    + CBCR_OFFSET + ONE_HALF-1;
+/*  B=>Cb and R=>Cr tables are the same
+    rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i    + CBCR_OFFSET + ONE_HALF-1;
+*/
+    rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i;
+    rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i;
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ *
+ * Note that we change from the application's interleaved-pixel format
+ * to our internal noninterleaved, one-plane-per-component format.
+ * The input buffer is therefore three times as wide as the output buffer.
+ *
+ * A starting row offset is provided only for the output buffer.  The caller
+ * can easily adjust the passed input_buf value to accommodate any row
+ * offset required on that side.
+ */
+
+METHODDEF(void)
+rgb_ycc_convert (j_compress_ptr cinfo,
+		 JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+		 JDIMENSION output_row, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register int r, g, b;
+  register INT32 * ctab = cconvert->rgb_ycc_tab;
+  register JSAMPROW inptr;
+  register JSAMPROW outptr0, outptr1, outptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr0 = output_buf[0][output_row];
+    outptr1 = output_buf[1][output_row];
+    outptr2 = output_buf[2][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr[RGB_RED]);
+      g = GETJSAMPLE(inptr[RGB_GREEN]);
+      b = GETJSAMPLE(inptr[RGB_BLUE]);
+      inptr += RGB_PIXELSIZE;
+      /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
+       * must be too; we do not need an explicit range-limiting operation.
+       * Hence the value being shifted is never negative, and we don't
+       * need the general RIGHT_SHIFT macro.
+       */
+      /* Y */
+      outptr0[col] = (JSAMPLE)
+		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
+		 >> SCALEBITS);
+      /* Cb */
+      outptr1[col] = (JSAMPLE)
+		((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF])
+		 >> SCALEBITS);
+      /* Cr */
+      outptr2[col] = (JSAMPLE)
+		((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
+		 >> SCALEBITS);
+    }
+  }
+}
+
+
+/**************** Cases other than RGB -> YCbCr **************/
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * This version handles RGB->grayscale conversion, which is the same
+ * as the RGB->Y portion of RGB->YCbCr.
+ * We assume rgb_ycc_start has been called (we only use the Y tables).
+ */
+
+METHODDEF(void)
+rgb_gray_convert (j_compress_ptr cinfo,
+		  JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+		  JDIMENSION output_row, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register int r, g, b;
+  register INT32 * ctab = cconvert->rgb_ycc_tab;
+  register JSAMPROW inptr;
+  register JSAMPROW outptr;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr = output_buf[0][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr[RGB_RED]);
+      g = GETJSAMPLE(inptr[RGB_GREEN]);
+      b = GETJSAMPLE(inptr[RGB_BLUE]);
+      inptr += RGB_PIXELSIZE;
+      /* Y */
+      outptr[col] = (JSAMPLE)
+		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
+		 >> SCALEBITS);
+    }
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * This version handles Adobe-style CMYK->YCCK conversion,
+ * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same
+ * conversion as above, while passing K (black) unchanged.
+ * We assume rgb_ycc_start has been called.
+ */
+
+METHODDEF(void)
+cmyk_ycck_convert (j_compress_ptr cinfo,
+		   JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+		   JDIMENSION output_row, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register int r, g, b;
+  register INT32 * ctab = cconvert->rgb_ycc_tab;
+  register JSAMPROW inptr;
+  register JSAMPROW outptr0, outptr1, outptr2, outptr3;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr0 = output_buf[0][output_row];
+    outptr1 = output_buf[1][output_row];
+    outptr2 = output_buf[2][output_row];
+    outptr3 = output_buf[3][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      r = MAXJSAMPLE - GETJSAMPLE(inptr[0]);
+      g = MAXJSAMPLE - GETJSAMPLE(inptr[1]);
+      b = MAXJSAMPLE - GETJSAMPLE(inptr[2]);
+      /* K passes through as-is */
+      outptr3[col] = inptr[3];	/* don't need GETJSAMPLE here */
+      inptr += 4;
+      /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
+       * must be too; we do not need an explicit range-limiting operation.
+       * Hence the value being shifted is never negative, and we don't
+       * need the general RIGHT_SHIFT macro.
+       */
+      /* Y */
+      outptr0[col] = (JSAMPLE)
+		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
+		 >> SCALEBITS);
+      /* Cb */
+      outptr1[col] = (JSAMPLE)
+		((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF])
+		 >> SCALEBITS);
+      /* Cr */
+      outptr2[col] = (JSAMPLE)
+		((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
+		 >> SCALEBITS);
+    }
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * This version handles grayscale output with no conversion.
+ * The source can be either plain grayscale or YCbCr (since Y == gray).
+ */
+
+METHODDEF(void)
+grayscale_convert (j_compress_ptr cinfo,
+		   JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+		   JDIMENSION output_row, int num_rows)
+{
+  register JSAMPROW inptr;
+  register JSAMPROW outptr;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+  int instride = cinfo->input_components;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr = output_buf[0][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      outptr[col] = inptr[0];	/* don't need GETJSAMPLE() here */
+      inptr += instride;
+    }
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * No colorspace conversion, but change from interleaved
+ * to separate-planes representation.
+ */
+
+METHODDEF(void)
+rgb_convert (j_compress_ptr cinfo,
+	     JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+	     JDIMENSION output_row, int num_rows)
+{
+  register JSAMPROW inptr;
+  register JSAMPROW outptr0, outptr1, outptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr0 = output_buf[0][output_row];
+    outptr1 = output_buf[1][output_row];
+    outptr2 = output_buf[2][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      /* We can dispense with GETJSAMPLE() here */
+      outptr0[col] = inptr[RGB_RED];
+      outptr1[col] = inptr[RGB_GREEN];
+      outptr2[col] = inptr[RGB_BLUE];
+      inptr += RGB_PIXELSIZE;
+    }
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * This version handles multi-component colorspaces without conversion.
+ * We assume input_components == num_components.
+ */
+
+METHODDEF(void)
+null_convert (j_compress_ptr cinfo,
+	      JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+	      JDIMENSION output_row, int num_rows)
+{
+  register JSAMPROW inptr;
+  register JSAMPROW outptr;
+  register JDIMENSION col;
+  register int ci;
+  int nc = cinfo->num_components;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    /* It seems fastest to make a separate pass for each component. */
+    for (ci = 0; ci < nc; ci++) {
+      inptr = *input_buf;
+      outptr = output_buf[ci][output_row];
+      for (col = 0; col < num_cols; col++) {
+	outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */
+	inptr += nc;
+      }
+    }
+    input_buf++;
+    output_row++;
+  }
+}
+
+
+/*
+ * Empty method for start_pass.
+ */
+
+METHODDEF(void)
+null_method (j_compress_ptr cinfo)
+{
+  /* no work needed */
+}
+
+
+/*
+ * Module initialization routine for input colorspace conversion.
+ */
+
+GLOBAL(void)
+jinit_color_converter (j_compress_ptr cinfo)
+{
+  my_cconvert_ptr cconvert;
+
+  cconvert = (my_cconvert_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_color_converter));
+  cinfo->cconvert = (struct jpeg_color_converter *) cconvert;
+  /* set start_pass to null method until we find out differently */
+  cconvert->pub.start_pass = null_method;
+
+  /* Make sure input_components agrees with in_color_space */
+  switch (cinfo->in_color_space) {
+  case JCS_GRAYSCALE:
+    if (cinfo->input_components != 1)
+      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
+    break;
+
+  case JCS_RGB:
+    if (cinfo->input_components != RGB_PIXELSIZE)
+      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
+    break;
+
+  case JCS_YCbCr:
+    if (cinfo->input_components != 3)
+      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
+    break;
+
+  case JCS_CMYK:
+  case JCS_YCCK:
+    if (cinfo->input_components != 4)
+      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
+    break;
+
+  default:			/* JCS_UNKNOWN can be anything */
+    if (cinfo->input_components < 1)
+      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
+    break;
+  }
+
+  /* Check num_components, set conversion method based on requested space */
+  switch (cinfo->jpeg_color_space) {
+  case JCS_GRAYSCALE:
+    if (cinfo->num_components != 1)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    if (cinfo->in_color_space == JCS_GRAYSCALE ||
+	cinfo->in_color_space == JCS_YCbCr)
+      cconvert->pub.color_convert = grayscale_convert;
+    else if (cinfo->in_color_space == JCS_RGB) {
+      cconvert->pub.start_pass = rgb_ycc_start;
+      cconvert->pub.color_convert = rgb_gray_convert;
+    } else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  case JCS_RGB:
+    if (cinfo->num_components != 3)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    if (cinfo->in_color_space == JCS_RGB)
+      cconvert->pub.color_convert = rgb_convert;
+    else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  case JCS_YCbCr:
+    if (cinfo->num_components != 3)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    if (cinfo->in_color_space == JCS_RGB) {
+      cconvert->pub.start_pass = rgb_ycc_start;
+      cconvert->pub.color_convert = rgb_ycc_convert;
+    } else if (cinfo->in_color_space == JCS_YCbCr)
+      cconvert->pub.color_convert = null_convert;
+    else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  case JCS_CMYK:
+    if (cinfo->num_components != 4)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    if (cinfo->in_color_space == JCS_CMYK)
+      cconvert->pub.color_convert = null_convert;
+    else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  case JCS_YCCK:
+    if (cinfo->num_components != 4)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    if (cinfo->in_color_space == JCS_CMYK) {
+      cconvert->pub.start_pass = rgb_ycc_start;
+      cconvert->pub.color_convert = cmyk_ycck_convert;
+    } else if (cinfo->in_color_space == JCS_YCCK)
+      cconvert->pub.color_convert = null_convert;
+    else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  default:			/* allow null conversion of JCS_UNKNOWN */
+    if (cinfo->jpeg_color_space != cinfo->in_color_space ||
+	cinfo->num_components != cinfo->input_components)
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    cconvert->pub.color_convert = null_convert;
+    break;
+  }
+}
diff --git a/jpeg-8d/jcdctmgr.c b/jpeg-8d/jcdctmgr.c
new file mode 100644
index 0000000..0bbdbb6
--- /dev/null
+++ b/jpeg-8d/jcdctmgr.c
@@ -0,0 +1,482 @@
+/*
+ * jcdctmgr.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the forward-DCT management logic.
+ * This code selects a particular DCT implementation to be used,
+ * and it performs related housekeeping chores including coefficient
+ * quantization.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+
+/* Private subobject for this module */
+
+typedef struct {
+  struct jpeg_forward_dct pub;	/* public fields */
+
+  /* Pointer to the DCT routine actually in use */
+  forward_DCT_method_ptr do_dct[MAX_COMPONENTS];
+
+  /* The actual post-DCT divisors --- not identical to the quant table
+   * entries, because of scaling (especially for an unnormalized DCT).
+   * Each table is given in normal array order.
+   */
+  DCTELEM * divisors[NUM_QUANT_TBLS];
+
+#ifdef DCT_FLOAT_SUPPORTED
+  /* Same as above for the floating-point case. */
+  float_DCT_method_ptr do_float_dct[MAX_COMPONENTS];
+  FAST_FLOAT * float_divisors[NUM_QUANT_TBLS];
+#endif
+} my_fdct_controller;
+
+typedef my_fdct_controller * my_fdct_ptr;
+
+
+/* The current scaled-DCT routines require ISLOW-style divisor tables,
+ * so be sure to compile that code if either ISLOW or SCALING is requested.
+ */
+#ifdef DCT_ISLOW_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#else
+#ifdef DCT_SCALING_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#endif
+#endif
+
+
+/*
+ * Perform forward DCT on one or more blocks of a component.
+ *
+ * The input samples are taken from the sample_data[] array starting at
+ * position start_row/start_col, and moving to the right for any additional
+ * blocks. The quantized coefficients are returned in coef_blocks[].
+ */
+
+METHODDEF(void)
+forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr,
+	     JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
+	     JDIMENSION start_row, JDIMENSION start_col,
+	     JDIMENSION num_blocks)
+/* This version is used for integer DCT implementations. */
+{
+  /* This routine is heavily used, so it's worth coding it tightly. */
+  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
+  forward_DCT_method_ptr do_dct = fdct->do_dct[compptr->component_index];
+  DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no];
+  DCTELEM workspace[DCTSIZE2];	/* work area for FDCT subroutine */
+  JDIMENSION bi;
+
+  sample_data += start_row;	/* fold in the vertical offset once */
+
+  for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) {
+    /* Perform the DCT */
+    (*do_dct) (workspace, sample_data, start_col);
+
+    /* Quantize/descale the coefficients, and store into coef_blocks[] */
+    { register DCTELEM temp, qval;
+      register int i;
+      register JCOEFPTR output_ptr = coef_blocks[bi];
+
+      for (i = 0; i < DCTSIZE2; i++) {
+	qval = divisors[i];
+	temp = workspace[i];
+	/* Divide the coefficient value by qval, ensuring proper rounding.
+	 * Since C does not specify the direction of rounding for negative
+	 * quotients, we have to force the dividend positive for portability.
+	 *
+	 * In most files, at least half of the output values will be zero
+	 * (at default quantization settings, more like three-quarters...)
+	 * so we should ensure that this case is fast.  On many machines,
+	 * a comparison is enough cheaper than a divide to make a special test
+	 * a win.  Since both inputs will be nonnegative, we need only test
+	 * for a < b to discover whether a/b is 0.
+	 * If your machine's division is fast enough, define FAST_DIVIDE.
+	 */
+#ifdef FAST_DIVIDE
+#define DIVIDE_BY(a,b)	a /= b
+#else
+#define DIVIDE_BY(a,b)	if (a >= b) a /= b; else a = 0
+#endif
+	if (temp < 0) {
+	  temp = -temp;
+	  temp += qval>>1;	/* for rounding */
+	  DIVIDE_BY(temp, qval);
+	  temp = -temp;
+	} else {
+	  temp += qval>>1;	/* for rounding */
+	  DIVIDE_BY(temp, qval);
+	}
+	output_ptr[i] = (JCOEF) temp;
+      }
+    }
+  }
+}
+
+
+#ifdef DCT_FLOAT_SUPPORTED
+
+METHODDEF(void)
+forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
+		   JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
+		   JDIMENSION start_row, JDIMENSION start_col,
+		   JDIMENSION num_blocks)
+/* This version is used for floating-point DCT implementations. */
+{
+  /* This routine is heavily used, so it's worth coding it tightly. */
+  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
+  float_DCT_method_ptr do_dct = fdct->do_float_dct[compptr->component_index];
+  FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no];
+  FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */
+  JDIMENSION bi;
+
+  sample_data += start_row;	/* fold in the vertical offset once */
+
+  for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) {
+    /* Perform the DCT */
+    (*do_dct) (workspace, sample_data, start_col);
+
+    /* Quantize/descale the coefficients, and store into coef_blocks[] */
+    { register FAST_FLOAT temp;
+      register int i;
+      register JCOEFPTR output_ptr = coef_blocks[bi];
+
+      for (i = 0; i < DCTSIZE2; i++) {
+	/* Apply the quantization and scaling factor */
+	temp = workspace[i] * divisors[i];
+	/* Round to nearest integer.
+	 * Since C does not specify the direction of rounding for negative
+	 * quotients, we have to force the dividend positive for portability.
+	 * The maximum coefficient size is +-16K (for 12-bit data), so this
+	 * code should work for either 16-bit or 32-bit ints.
+	 */
+	output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384);
+      }
+    }
+  }
+}
+
+#endif /* DCT_FLOAT_SUPPORTED */
+
+
+/*
+ * Initialize for a processing pass.
+ * Verify that all referenced Q-tables are present, and set up
+ * the divisor table for each one.
+ * In the current implementation, DCT of all components is done during
+ * the first pass, even if only some components will be output in the
+ * first scan.  Hence all components should be examined here.
+ */
+
+METHODDEF(void)
+start_pass_fdctmgr (j_compress_ptr cinfo)
+{
+  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
+  int ci, qtblno, i;
+  jpeg_component_info *compptr;
+  int method = 0;
+  JQUANT_TBL * qtbl;
+  DCTELEM * dtbl;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Select the proper DCT routine for this component's scaling */
+    switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) {
+#ifdef DCT_SCALING_SUPPORTED
+    case ((1 << 8) + 1):
+      fdct->do_dct[ci] = jpeg_fdct_1x1;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((2 << 8) + 2):
+      fdct->do_dct[ci] = jpeg_fdct_2x2;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((3 << 8) + 3):
+      fdct->do_dct[ci] = jpeg_fdct_3x3;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((4 << 8) + 4):
+      fdct->do_dct[ci] = jpeg_fdct_4x4;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((5 << 8) + 5):
+      fdct->do_dct[ci] = jpeg_fdct_5x5;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((6 << 8) + 6):
+      fdct->do_dct[ci] = jpeg_fdct_6x6;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((7 << 8) + 7):
+      fdct->do_dct[ci] = jpeg_fdct_7x7;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((9 << 8) + 9):
+      fdct->do_dct[ci] = jpeg_fdct_9x9;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((10 << 8) + 10):
+      fdct->do_dct[ci] = jpeg_fdct_10x10;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((11 << 8) + 11):
+      fdct->do_dct[ci] = jpeg_fdct_11x11;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((12 << 8) + 12):
+      fdct->do_dct[ci] = jpeg_fdct_12x12;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((13 << 8) + 13):
+      fdct->do_dct[ci] = jpeg_fdct_13x13;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((14 << 8) + 14):
+      fdct->do_dct[ci] = jpeg_fdct_14x14;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((15 << 8) + 15):
+      fdct->do_dct[ci] = jpeg_fdct_15x15;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((16 << 8) + 16):
+      fdct->do_dct[ci] = jpeg_fdct_16x16;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((16 << 8) + 8):
+      fdct->do_dct[ci] = jpeg_fdct_16x8;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((14 << 8) + 7):
+      fdct->do_dct[ci] = jpeg_fdct_14x7;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((12 << 8) + 6):
+      fdct->do_dct[ci] = jpeg_fdct_12x6;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((10 << 8) + 5):
+      fdct->do_dct[ci] = jpeg_fdct_10x5;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((8 << 8) + 4):
+      fdct->do_dct[ci] = jpeg_fdct_8x4;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((6 << 8) + 3):
+      fdct->do_dct[ci] = jpeg_fdct_6x3;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((4 << 8) + 2):
+      fdct->do_dct[ci] = jpeg_fdct_4x2;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((2 << 8) + 1):
+      fdct->do_dct[ci] = jpeg_fdct_2x1;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((8 << 8) + 16):
+      fdct->do_dct[ci] = jpeg_fdct_8x16;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((7 << 8) + 14):
+      fdct->do_dct[ci] = jpeg_fdct_7x14;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((6 << 8) + 12):
+      fdct->do_dct[ci] = jpeg_fdct_6x12;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((5 << 8) + 10):
+      fdct->do_dct[ci] = jpeg_fdct_5x10;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((4 << 8) + 8):
+      fdct->do_dct[ci] = jpeg_fdct_4x8;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((3 << 8) + 6):
+      fdct->do_dct[ci] = jpeg_fdct_3x6;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((2 << 8) + 4):
+      fdct->do_dct[ci] = jpeg_fdct_2x4;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((1 << 8) + 2):
+      fdct->do_dct[ci] = jpeg_fdct_1x2;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+#endif
+    case ((DCTSIZE << 8) + DCTSIZE):
+      switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+      case JDCT_ISLOW:
+	fdct->do_dct[ci] = jpeg_fdct_islow;
+	method = JDCT_ISLOW;
+	break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+      case JDCT_IFAST:
+	fdct->do_dct[ci] = jpeg_fdct_ifast;
+	method = JDCT_IFAST;
+	break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+      case JDCT_FLOAT:
+	fdct->do_float_dct[ci] = jpeg_fdct_float;
+	method = JDCT_FLOAT;
+	break;
+#endif
+      default:
+	ERREXIT(cinfo, JERR_NOT_COMPILED);
+	break;
+      }
+      break;
+    default:
+      ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
+	       compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size);
+      break;
+    }
+    qtblno = compptr->quant_tbl_no;
+    /* Make sure specified quantization table is present */
+    if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
+	cinfo->quant_tbl_ptrs[qtblno] == NULL)
+      ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
+    qtbl = cinfo->quant_tbl_ptrs[qtblno];
+    /* Compute divisors for this quant table */
+    /* We may do this more than once for same table, but it's not a big deal */
+    switch (method) {
+#ifdef PROVIDE_ISLOW_TABLES
+    case JDCT_ISLOW:
+      /* For LL&M IDCT method, divisors are equal to raw quantization
+       * coefficients multiplied by 8 (to counteract scaling).
+       */
+      if (fdct->divisors[qtblno] == NULL) {
+	fdct->divisors[qtblno] = (DCTELEM *)
+	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				      DCTSIZE2 * SIZEOF(DCTELEM));
+      }
+      dtbl = fdct->divisors[qtblno];
+      for (i = 0; i < DCTSIZE2; i++) {
+	dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3;
+      }
+      fdct->pub.forward_DCT[ci] = forward_DCT;
+      break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+    case JDCT_IFAST:
+      {
+	/* For AA&N IDCT method, divisors are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * We apply a further scale factor of 8.
+	 */
+#define CONST_BITS 14
+	static const INT16 aanscales[DCTSIZE2] = {
+	  /* precomputed values scaled up by 14 bits */
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
+	  21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
+	  19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
+	   8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
+	   4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
+	};
+	SHIFT_TEMPS
+
+	if (fdct->divisors[qtblno] == NULL) {
+	  fdct->divisors[qtblno] = (DCTELEM *)
+	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+					DCTSIZE2 * SIZEOF(DCTELEM));
+	}
+	dtbl = fdct->divisors[qtblno];
+	for (i = 0; i < DCTSIZE2; i++) {
+	  dtbl[i] = (DCTELEM)
+	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
+				  (INT32) aanscales[i]),
+		    CONST_BITS-3);
+	}
+      }
+      fdct->pub.forward_DCT[ci] = forward_DCT;
+      break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+    case JDCT_FLOAT:
+      {
+	/* For float AA&N IDCT method, divisors are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * We apply a further scale factor of 8.
+	 * What's actually stored is 1/divisor so that the inner loop can
+	 * use a multiplication rather than a division.
+	 */
+	FAST_FLOAT * fdtbl;
+	int row, col;
+	static const double aanscalefactor[DCTSIZE] = {
+	  1.0, 1.387039845, 1.306562965, 1.175875602,
+	  1.0, 0.785694958, 0.541196100, 0.275899379
+	};
+
+	if (fdct->float_divisors[qtblno] == NULL) {
+	  fdct->float_divisors[qtblno] = (FAST_FLOAT *)
+	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+					DCTSIZE2 * SIZEOF(FAST_FLOAT));
+	}
+	fdtbl = fdct->float_divisors[qtblno];
+	i = 0;
+	for (row = 0; row < DCTSIZE; row++) {
+	  for (col = 0; col < DCTSIZE; col++) {
+	    fdtbl[i] = (FAST_FLOAT)
+	      (1.0 / (((double) qtbl->quantval[i] *
+		       aanscalefactor[row] * aanscalefactor[col] * 8.0)));
+	    i++;
+	  }
+	}
+      }
+      fdct->pub.forward_DCT[ci] = forward_DCT_float;
+      break;
+#endif
+    default:
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+      break;
+    }
+  }
+}
+
+
+/*
+ * Initialize FDCT manager.
+ */
+
+GLOBAL(void)
+jinit_forward_dct (j_compress_ptr cinfo)
+{
+  my_fdct_ptr fdct;
+  int i;
+
+  fdct = (my_fdct_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_fdct_controller));
+  cinfo->fdct = (struct jpeg_forward_dct *) fdct;
+  fdct->pub.start_pass = start_pass_fdctmgr;
+
+  /* Mark divisor tables unallocated */
+  for (i = 0; i < NUM_QUANT_TBLS; i++) {
+    fdct->divisors[i] = NULL;
+#ifdef DCT_FLOAT_SUPPORTED
+    fdct->float_divisors[i] = NULL;
+#endif
+  }
+}
diff --git a/jpeg-8d/jchuff.c b/jpeg-8d/jchuff.c
new file mode 100644
index 0000000..257d7aa
--- /dev/null
+++ b/jpeg-8d/jchuff.c
@@ -0,0 +1,1576 @@
+/*
+ * jchuff.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2006-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains Huffman entropy encoding routines.
+ * Both sequential and progressive modes are supported in this single module.
+ *
+ * Much of the complexity here has to do with supporting output suspension.
+ * If the data destination module demands suspension, we want to be able to
+ * back up to the start of the current MCU.  To do this, we copy state
+ * variables into local working storage, and update them back to the
+ * permanent JPEG objects only upon successful completion of an MCU.
+ *
+ * We do not support output suspension for the progressive JPEG mode, since
+ * the library currently does not allow multiple-scan files to be written
+ * with output suspension.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* The legal range of a DCT coefficient is
+ *  -1024 .. +1023  for 8-bit data;
+ * -16384 .. +16383 for 12-bit data.
+ * Hence the magnitude should always fit in 10 or 14 bits respectively.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+#define MAX_COEF_BITS 10
+#else
+#define MAX_COEF_BITS 14
+#endif
+
+/* Derived data constructed for each Huffman table */
+
+typedef struct {
+  unsigned int ehufco[256];	/* code for each symbol */
+  char ehufsi[256];		/* length of code for each symbol */
+  /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */
+} c_derived_tbl;
+
+
+/* Expanded entropy encoder object for Huffman encoding.
+ *
+ * The savable_state subrecord contains fields that change within an MCU,
+ * but must not be updated permanently until we complete the MCU.
+ */
+
+typedef struct {
+  INT32 put_buffer;		/* current bit-accumulation buffer */
+  int put_bits;			/* # of bits now in it */
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+} savable_state;
+
+/* This macro is to work around compilers with missing or broken
+ * structure assignment.  You'll need to fix this code if you have
+ * such a compiler and you change MAX_COMPS_IN_SCAN.
+ */
+
+#ifndef NO_STRUCT_ASSIGN
+#define ASSIGN_STATE(dest,src)  ((dest) = (src))
+#else
+#if MAX_COMPS_IN_SCAN == 4
+#define ASSIGN_STATE(dest,src)  \
+	((dest).put_buffer = (src).put_buffer, \
+	 (dest).put_bits = (src).put_bits, \
+	 (dest).last_dc_val[0] = (src).last_dc_val[0], \
+	 (dest).last_dc_val[1] = (src).last_dc_val[1], \
+	 (dest).last_dc_val[2] = (src).last_dc_val[2], \
+	 (dest).last_dc_val[3] = (src).last_dc_val[3])
+#endif
+#endif
+
+
+typedef struct {
+  struct jpeg_entropy_encoder pub; /* public fields */
+
+  savable_state saved;		/* Bit buffer & DC state at start of MCU */
+
+  /* These fields are NOT loaded into local working state. */
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+  int next_restart_num;		/* next restart number to write (0-7) */
+
+  /* Pointers to derived tables (these workspaces have image lifespan) */
+  c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS];
+  c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS];
+
+  /* Statistics tables for optimization */
+  long * dc_count_ptrs[NUM_HUFF_TBLS];
+  long * ac_count_ptrs[NUM_HUFF_TBLS];
+
+  /* Following fields used only in progressive mode */
+
+  /* Mode flag: TRUE for optimization, FALSE for actual data output */
+  boolean gather_statistics;
+
+  /* next_output_byte/free_in_buffer are local copies of cinfo->dest fields.
+   */
+  JOCTET * next_output_byte;	/* => next byte to write in buffer */
+  size_t free_in_buffer;	/* # of byte spaces remaining in buffer */
+  j_compress_ptr cinfo;		/* link to cinfo (needed for dump_buffer) */
+
+  /* Coding status for AC components */
+  int ac_tbl_no;		/* the table number of the single component */
+  unsigned int EOBRUN;		/* run length of EOBs */
+  unsigned int BE;		/* # of buffered correction bits before MCU */
+  char * bit_buffer;		/* buffer for correction bits (1 per char) */
+  /* packing correction bits tightly would save some space but cost time... */
+} huff_entropy_encoder;
+
+typedef huff_entropy_encoder * huff_entropy_ptr;
+
+/* Working state while writing an MCU (sequential mode).
+ * This struct contains all the fields that are needed by subroutines.
+ */
+
+typedef struct {
+  JOCTET * next_output_byte;	/* => next byte to write in buffer */
+  size_t free_in_buffer;	/* # of byte spaces remaining in buffer */
+  savable_state cur;		/* Current bit buffer & DC state */
+  j_compress_ptr cinfo;		/* dump_buffer needs access to this */
+} working_state;
+
+/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit
+ * buffer can hold.  Larger sizes may slightly improve compression, but
+ * 1000 is already well into the realm of overkill.
+ * The minimum safe size is 64 bits.
+ */
+
+#define MAX_CORR_BITS  1000	/* Max # of correction bits I can buffer */
+
+/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32.
+ * We assume that int right shift is unsigned if INT32 right shift is,
+ * which should be safe.
+ */
+
+#ifdef RIGHT_SHIFT_IS_UNSIGNED
+#define ISHIFT_TEMPS	int ishift_temp;
+#define IRIGHT_SHIFT(x,shft)  \
+	((ishift_temp = (x)) < 0 ? \
+	 (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \
+	 (ishift_temp >> (shft)))
+#else
+#define ISHIFT_TEMPS
+#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
+#endif
+
+
+/*
+ * Compute the derived values for a Huffman table.
+ * This routine also performs some validation checks on the table.
+ */
+
+LOCAL(void)
+jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno,
+			 c_derived_tbl ** pdtbl)
+{
+  JHUFF_TBL *htbl;
+  c_derived_tbl *dtbl;
+  int p, i, l, lastp, si, maxsymbol;
+  char huffsize[257];
+  unsigned int huffcode[257];
+  unsigned int code;
+
+  /* Note that huffsize[] and huffcode[] are filled in code-length order,
+   * paralleling the order of the symbols themselves in htbl->huffval[].
+   */
+
+  /* Find the input Huffman table */
+  if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+  htbl =
+    isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
+  if (htbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+
+  /* Allocate a workspace if we haven't already done so. */
+  if (*pdtbl == NULL)
+    *pdtbl = (c_derived_tbl *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(c_derived_tbl));
+  dtbl = *pdtbl;
+  
+  /* Figure C.1: make table of Huffman code length for each symbol */
+
+  p = 0;
+  for (l = 1; l <= 16; l++) {
+    i = (int) htbl->bits[l];
+    if (i < 0 || p + i > 256)	/* protect against table overrun */
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    while (i--)
+      huffsize[p++] = (char) l;
+  }
+  huffsize[p] = 0;
+  lastp = p;
+  
+  /* Figure C.2: generate the codes themselves */
+  /* We also validate that the counts represent a legal Huffman code tree. */
+
+  code = 0;
+  si = huffsize[0];
+  p = 0;
+  while (huffsize[p]) {
+    while (((int) huffsize[p]) == si) {
+      huffcode[p++] = code;
+      code++;
+    }
+    /* code is now 1 more than the last code used for codelength si; but
+     * it must still fit in si bits, since no code is allowed to be all ones.
+     */
+    if (((INT32) code) >= (((INT32) 1) << si))
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    code <<= 1;
+    si++;
+  }
+  
+  /* Figure C.3: generate encoding tables */
+  /* These are code and size indexed by symbol value */
+
+  /* Set all codeless symbols to have code length 0;
+   * this lets us detect duplicate VAL entries here, and later
+   * allows emit_bits to detect any attempt to emit such symbols.
+   */
+  MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi));
+
+  /* This is also a convenient place to check for out-of-range
+   * and duplicated VAL entries.  We allow 0..255 for AC symbols
+   * but only 0..15 for DC.  (We could constrain them further
+   * based on data depth and mode, but this seems enough.)
+   */
+  maxsymbol = isDC ? 15 : 255;
+
+  for (p = 0; p < lastp; p++) {
+    i = htbl->huffval[p];
+    if (i < 0 || i > maxsymbol || dtbl->ehufsi[i])
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    dtbl->ehufco[i] = huffcode[p];
+    dtbl->ehufsi[i] = huffsize[p];
+  }
+}
+
+
+/* Outputting bytes to the file.
+ * NB: these must be called only when actually outputting,
+ * that is, entropy->gather_statistics == FALSE.
+ */
+
+/* Emit a byte, taking 'action' if must suspend. */
+#define emit_byte_s(state,val,action)  \
+	{ *(state)->next_output_byte++ = (JOCTET) (val);  \
+	  if (--(state)->free_in_buffer == 0)  \
+	    if (! dump_buffer_s(state))  \
+	      { action; } }
+
+/* Emit a byte */
+#define emit_byte_e(entropy,val)  \
+	{ *(entropy)->next_output_byte++ = (JOCTET) (val);  \
+	  if (--(entropy)->free_in_buffer == 0)  \
+	    dump_buffer_e(entropy); }
+
+
+LOCAL(boolean)
+dump_buffer_s (working_state * state)
+/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */
+{
+  struct jpeg_destination_mgr * dest = state->cinfo->dest;
+
+  if (! (*dest->empty_output_buffer) (state->cinfo))
+    return FALSE;
+  /* After a successful buffer dump, must reset buffer pointers */
+  state->next_output_byte = dest->next_output_byte;
+  state->free_in_buffer = dest->free_in_buffer;
+  return TRUE;
+}
+
+
+LOCAL(void)
+dump_buffer_e (huff_entropy_ptr entropy)
+/* Empty the output buffer; we do not support suspension in this case. */
+{
+  struct jpeg_destination_mgr * dest = entropy->cinfo->dest;
+
+  if (! (*dest->empty_output_buffer) (entropy->cinfo))
+    ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND);
+  /* After a successful buffer dump, must reset buffer pointers */
+  entropy->next_output_byte = dest->next_output_byte;
+  entropy->free_in_buffer = dest->free_in_buffer;
+}
+
+
+/* Outputting bits to the file */
+
+/* Only the right 24 bits of put_buffer are used; the valid bits are
+ * left-justified in this part.  At most 16 bits can be passed to emit_bits
+ * in one call, and we never retain more than 7 bits in put_buffer
+ * between calls, so 24 bits are sufficient.
+ */
+
+INLINE
+LOCAL(boolean)
+emit_bits_s (working_state * state, unsigned int code, int size)
+/* Emit some bits; return TRUE if successful, FALSE if must suspend */
+{
+  /* This routine is heavily used, so it's worth coding tightly. */
+  register INT32 put_buffer = (INT32) code;
+  register int put_bits = state->cur.put_bits;
+
+  /* if size is 0, caller used an invalid Huffman table entry */
+  if (size == 0)
+    ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE);
+
+  put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
+  
+  put_bits += size;		/* new number of bits in buffer */
+  
+  put_buffer <<= 24 - put_bits; /* align incoming bits */
+
+  put_buffer |= state->cur.put_buffer; /* and merge with old buffer contents */
+  
+  while (put_bits >= 8) {
+    int c = (int) ((put_buffer >> 16) & 0xFF);
+    
+    emit_byte_s(state, c, return FALSE);
+    if (c == 0xFF) {		/* need to stuff a zero byte? */
+      emit_byte_s(state, 0, return FALSE);
+    }
+    put_buffer <<= 8;
+    put_bits -= 8;
+  }
+
+  state->cur.put_buffer = put_buffer; /* update state variables */
+  state->cur.put_bits = put_bits;
+
+  return TRUE;
+}
+
+
+INLINE
+LOCAL(void)
+emit_bits_e (huff_entropy_ptr entropy, unsigned int code, int size)
+/* Emit some bits, unless we are in gather mode */
+{
+  /* This routine is heavily used, so it's worth coding tightly. */
+  register INT32 put_buffer = (INT32) code;
+  register int put_bits = entropy->saved.put_bits;
+
+  /* if size is 0, caller used an invalid Huffman table entry */
+  if (size == 0)
+    ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE);
+
+  if (entropy->gather_statistics)
+    return;			/* do nothing if we're only getting stats */
+
+  put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
+  
+  put_bits += size;		/* new number of bits in buffer */
+
+  put_buffer <<= 24 - put_bits; /* align incoming bits */
+
+  /* and merge with old buffer contents */
+  put_buffer |= entropy->saved.put_buffer;
+
+  while (put_bits >= 8) {
+    int c = (int) ((put_buffer >> 16) & 0xFF);
+
+    emit_byte_e(entropy, c);
+    if (c == 0xFF) {		/* need to stuff a zero byte? */
+      emit_byte_e(entropy, 0);
+    }
+    put_buffer <<= 8;
+    put_bits -= 8;
+  }
+
+  entropy->saved.put_buffer = put_buffer; /* update variables */
+  entropy->saved.put_bits = put_bits;
+}
+
+
+LOCAL(boolean)
+flush_bits_s (working_state * state)
+{
+  if (! emit_bits_s(state, 0x7F, 7)) /* fill any partial byte with ones */
+    return FALSE;
+  state->cur.put_buffer = 0;	     /* and reset bit-buffer to empty */
+  state->cur.put_bits = 0;
+  return TRUE;
+}
+
+
+LOCAL(void)
+flush_bits_e (huff_entropy_ptr entropy)
+{
+  emit_bits_e(entropy, 0x7F, 7); /* fill any partial byte with ones */
+  entropy->saved.put_buffer = 0; /* and reset bit-buffer to empty */
+  entropy->saved.put_bits = 0;
+}
+
+
+/*
+ * Emit (or just count) a Huffman symbol.
+ */
+
+INLINE
+LOCAL(void)
+emit_dc_symbol (huff_entropy_ptr entropy, int tbl_no, int symbol)
+{
+  if (entropy->gather_statistics)
+    entropy->dc_count_ptrs[tbl_no][symbol]++;
+  else {
+    c_derived_tbl * tbl = entropy->dc_derived_tbls[tbl_no];
+    emit_bits_e(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]);
+  }
+}
+
+
+INLINE
+LOCAL(void)
+emit_ac_symbol (huff_entropy_ptr entropy, int tbl_no, int symbol)
+{
+  if (entropy->gather_statistics)
+    entropy->ac_count_ptrs[tbl_no][symbol]++;
+  else {
+    c_derived_tbl * tbl = entropy->ac_derived_tbls[tbl_no];
+    emit_bits_e(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]);
+  }
+}
+
+
+/*
+ * Emit bits from a correction bit buffer.
+ */
+
+LOCAL(void)
+emit_buffered_bits (huff_entropy_ptr entropy, char * bufstart,
+		    unsigned int nbits)
+{
+  if (entropy->gather_statistics)
+    return;			/* no real work */
+
+  while (nbits > 0) {
+    emit_bits_e(entropy, (unsigned int) (*bufstart), 1);
+    bufstart++;
+    nbits--;
+  }
+}
+
+
+/*
+ * Emit any pending EOBRUN symbol.
+ */
+
+LOCAL(void)
+emit_eobrun (huff_entropy_ptr entropy)
+{
+  register int temp, nbits;
+
+  if (entropy->EOBRUN > 0) {	/* if there is any pending EOBRUN */
+    temp = entropy->EOBRUN;
+    nbits = 0;
+    while ((temp >>= 1))
+      nbits++;
+    /* safety check: shouldn't happen given limited correction-bit buffer */
+    if (nbits > 14)
+      ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE);
+
+    emit_ac_symbol(entropy, entropy->ac_tbl_no, nbits << 4);
+    if (nbits)
+      emit_bits_e(entropy, entropy->EOBRUN, nbits);
+
+    entropy->EOBRUN = 0;
+
+    /* Emit any buffered correction bits */
+    emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE);
+    entropy->BE = 0;
+  }
+}
+
+
+/*
+ * Emit a restart marker & resynchronize predictions.
+ */
+
+LOCAL(boolean)
+emit_restart_s (working_state * state, int restart_num)
+{
+  int ci;
+
+  if (! flush_bits_s(state))
+    return FALSE;
+
+  emit_byte_s(state, 0xFF, return FALSE);
+  emit_byte_s(state, JPEG_RST0 + restart_num, return FALSE);
+
+  /* Re-initialize DC predictions to 0 */
+  for (ci = 0; ci < state->cinfo->comps_in_scan; ci++)
+    state->cur.last_dc_val[ci] = 0;
+
+  /* The restart counter is not updated until we successfully write the MCU. */
+
+  return TRUE;
+}
+
+
+LOCAL(void)
+emit_restart_e (huff_entropy_ptr entropy, int restart_num)
+{
+  int ci;
+
+  emit_eobrun(entropy);
+
+  if (! entropy->gather_statistics) {
+    flush_bits_e(entropy);
+    emit_byte_e(entropy, 0xFF);
+    emit_byte_e(entropy, JPEG_RST0 + restart_num);
+  }
+
+  if (entropy->cinfo->Ss == 0) {
+    /* Re-initialize DC predictions to 0 */
+    for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++)
+      entropy->saved.last_dc_val[ci] = 0;
+  } else {
+    /* Re-initialize all AC-related fields to 0 */
+    entropy->EOBRUN = 0;
+    entropy->BE = 0;
+  }
+}
+
+
+/*
+ * MCU encoding for DC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  register int temp, temp2;
+  register int nbits;
+  int blkn, ci;
+  int Al = cinfo->Al;
+  JBLOCKROW block;
+  jpeg_component_info * compptr;
+  ISHIFT_TEMPS
+
+  entropy->next_output_byte = cinfo->dest->next_output_byte;
+  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval)
+    if (entropy->restarts_to_go == 0)
+      emit_restart_e(entropy, entropy->next_restart_num);
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+
+    /* Compute the DC value after the required point transform by Al.
+     * This is simply an arithmetic right shift.
+     */
+    temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al);
+
+    /* DC differences are figured on the point-transformed values. */
+    temp = temp2 - entropy->saved.last_dc_val[ci];
+    entropy->saved.last_dc_val[ci] = temp2;
+
+    /* Encode the DC coefficient difference per section G.1.2.1 */
+    temp2 = temp;
+    if (temp < 0) {
+      temp = -temp;		/* temp is abs value of input */
+      /* For a negative input, want temp2 = bitwise complement of abs(input) */
+      /* This code assumes we are on a two's complement machine */
+      temp2--;
+    }
+    
+    /* Find the number of bits needed for the magnitude of the coefficient */
+    nbits = 0;
+    while (temp) {
+      nbits++;
+      temp >>= 1;
+    }
+    /* Check for out-of-range coefficient values.
+     * Since we're encoding a difference, the range limit is twice as much.
+     */
+    if (nbits > MAX_COEF_BITS+1)
+      ERREXIT(cinfo, JERR_BAD_DCT_COEF);
+    
+    /* Count/emit the Huffman-coded symbol for the number of bits */
+    emit_dc_symbol(entropy, compptr->dc_tbl_no, nbits);
+    
+    /* Emit that number of bits of the value, if positive, */
+    /* or the complement of its magnitude, if negative. */
+    if (nbits)			/* emit_bits rejects calls with size 0 */
+      emit_bits_e(entropy, (unsigned int) temp2, nbits);
+  }
+
+  cinfo->dest->next_output_byte = entropy->next_output_byte;
+  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
+
+  /* Update restart-interval state too */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for AC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  register int temp, temp2;
+  register int nbits;
+  register int r, k;
+  int Se, Al;
+  const int * natural_order;
+  JBLOCKROW block;
+
+  entropy->next_output_byte = cinfo->dest->next_output_byte;
+  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval)
+    if (entropy->restarts_to_go == 0)
+      emit_restart_e(entropy, entropy->next_restart_num);
+
+  Se = cinfo->Se;
+  Al = cinfo->Al;
+  natural_order = cinfo->natural_order;
+
+  /* Encode the MCU data block */
+  block = MCU_data[0];
+
+  /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */
+  
+  r = 0;			/* r = run length of zeros */
+   
+  for (k = cinfo->Ss; k <= Se; k++) {
+    if ((temp = (*block)[natural_order[k]]) == 0) {
+      r++;
+      continue;
+    }
+    /* We must apply the point transform by Al.  For AC coefficients this
+     * is an integer division with rounding towards 0.  To do this portably
+     * in C, we shift after obtaining the absolute value; so the code is
+     * interwoven with finding the abs value (temp) and output bits (temp2).
+     */
+    if (temp < 0) {
+      temp = -temp;		/* temp is abs value of input */
+      temp >>= Al;		/* apply the point transform */
+      /* For a negative coef, want temp2 = bitwise complement of abs(coef) */
+      temp2 = ~temp;
+    } else {
+      temp >>= Al;		/* apply the point transform */
+      temp2 = temp;
+    }
+    /* Watch out for case that nonzero coef is zero after point transform */
+    if (temp == 0) {
+      r++;
+      continue;
+    }
+
+    /* Emit any pending EOBRUN */
+    if (entropy->EOBRUN > 0)
+      emit_eobrun(entropy);
+    /* if run length > 15, must emit special run-length-16 codes (0xF0) */
+    while (r > 15) {
+      emit_ac_symbol(entropy, entropy->ac_tbl_no, 0xF0);
+      r -= 16;
+    }
+
+    /* Find the number of bits needed for the magnitude of the coefficient */
+    nbits = 1;			/* there must be at least one 1 bit */
+    while ((temp >>= 1))
+      nbits++;
+    /* Check for out-of-range coefficient values */
+    if (nbits > MAX_COEF_BITS)
+      ERREXIT(cinfo, JERR_BAD_DCT_COEF);
+
+    /* Count/emit Huffman symbol for run length / number of bits */
+    emit_ac_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits);
+
+    /* Emit that number of bits of the value, if positive, */
+    /* or the complement of its magnitude, if negative. */
+    emit_bits_e(entropy, (unsigned int) temp2, nbits);
+
+    r = 0;			/* reset zero run length */
+  }
+
+  if (r > 0) {			/* If there are trailing zeroes, */
+    entropy->EOBRUN++;		/* count an EOB */
+    if (entropy->EOBRUN == 0x7FFF)
+      emit_eobrun(entropy);	/* force it out to avoid overflow */
+  }
+
+  cinfo->dest->next_output_byte = entropy->next_output_byte;
+  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
+
+  /* Update restart-interval state too */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for DC successive approximation refinement scan.
+ * Note: we assume such scans can be multi-component, although the spec
+ * is not very clear on the point.
+ */
+
+METHODDEF(boolean)
+encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  register int temp;
+  int blkn;
+  int Al = cinfo->Al;
+  JBLOCKROW block;
+
+  entropy->next_output_byte = cinfo->dest->next_output_byte;
+  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval)
+    if (entropy->restarts_to_go == 0)
+      emit_restart_e(entropy, entropy->next_restart_num);
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+
+    /* We simply emit the Al'th bit of the DC coefficient value. */
+    temp = (*block)[0];
+    emit_bits_e(entropy, (unsigned int) (temp >> Al), 1);
+  }
+
+  cinfo->dest->next_output_byte = entropy->next_output_byte;
+  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
+
+  /* Update restart-interval state too */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for AC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  register int temp;
+  register int r, k;
+  int EOB;
+  char *BR_buffer;
+  unsigned int BR;
+  int Se, Al;
+  const int * natural_order;
+  JBLOCKROW block;
+  int absvalues[DCTSIZE2];
+
+  entropy->next_output_byte = cinfo->dest->next_output_byte;
+  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval)
+    if (entropy->restarts_to_go == 0)
+      emit_restart_e(entropy, entropy->next_restart_num);
+
+  Se = cinfo->Se;
+  Al = cinfo->Al;
+  natural_order = cinfo->natural_order;
+
+  /* Encode the MCU data block */
+  block = MCU_data[0];
+
+  /* It is convenient to make a pre-pass to determine the transformed
+   * coefficients' absolute values and the EOB position.
+   */
+  EOB = 0;
+  for (k = cinfo->Ss; k <= Se; k++) {
+    temp = (*block)[natural_order[k]];
+    /* We must apply the point transform by Al.  For AC coefficients this
+     * is an integer division with rounding towards 0.  To do this portably
+     * in C, we shift after obtaining the absolute value.
+     */
+    if (temp < 0)
+      temp = -temp;		/* temp is abs value of input */
+    temp >>= Al;		/* apply the point transform */
+    absvalues[k] = temp;	/* save abs value for main pass */
+    if (temp == 1)
+      EOB = k;			/* EOB = index of last newly-nonzero coef */
+  }
+
+  /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */
+  
+  r = 0;			/* r = run length of zeros */
+  BR = 0;			/* BR = count of buffered bits added now */
+  BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */
+
+  for (k = cinfo->Ss; k <= Se; k++) {
+    if ((temp = absvalues[k]) == 0) {
+      r++;
+      continue;
+    }
+
+    /* Emit any required ZRLs, but not if they can be folded into EOB */
+    while (r > 15 && k <= EOB) {
+      /* emit any pending EOBRUN and the BE correction bits */
+      emit_eobrun(entropy);
+      /* Emit ZRL */
+      emit_ac_symbol(entropy, entropy->ac_tbl_no, 0xF0);
+      r -= 16;
+      /* Emit buffered correction bits that must be associated with ZRL */
+      emit_buffered_bits(entropy, BR_buffer, BR);
+      BR_buffer = entropy->bit_buffer; /* BE bits are gone now */
+      BR = 0;
+    }
+
+    /* If the coef was previously nonzero, it only needs a correction bit.
+     * NOTE: a straight translation of the spec's figure G.7 would suggest
+     * that we also need to test r > 15.  But if r > 15, we can only get here
+     * if k > EOB, which implies that this coefficient is not 1.
+     */
+    if (temp > 1) {
+      /* The correction bit is the next bit of the absolute value. */
+      BR_buffer[BR++] = (char) (temp & 1);
+      continue;
+    }
+
+    /* Emit any pending EOBRUN and the BE correction bits */
+    emit_eobrun(entropy);
+
+    /* Count/emit Huffman symbol for run length / number of bits */
+    emit_ac_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1);
+
+    /* Emit output bit for newly-nonzero coef */
+    temp = ((*block)[natural_order[k]] < 0) ? 0 : 1;
+    emit_bits_e(entropy, (unsigned int) temp, 1);
+
+    /* Emit buffered correction bits that must be associated with this code */
+    emit_buffered_bits(entropy, BR_buffer, BR);
+    BR_buffer = entropy->bit_buffer; /* BE bits are gone now */
+    BR = 0;
+    r = 0;			/* reset zero run length */
+  }
+
+  if (r > 0 || BR > 0) {	/* If there are trailing zeroes, */
+    entropy->EOBRUN++;		/* count an EOB */
+    entropy->BE += BR;		/* concat my correction bits to older ones */
+    /* We force out the EOB if we risk either:
+     * 1. overflow of the EOB counter;
+     * 2. overflow of the correction bit buffer during the next MCU.
+     */
+    if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1))
+      emit_eobrun(entropy);
+  }
+
+  cinfo->dest->next_output_byte = entropy->next_output_byte;
+  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
+
+  /* Update restart-interval state too */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  return TRUE;
+}
+
+
+/* Encode a single block's worth of coefficients */
+
+LOCAL(boolean)
+encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val,
+		  c_derived_tbl *dctbl, c_derived_tbl *actbl)
+{
+  register int temp, temp2;
+  register int nbits;
+  register int k, r, i;
+  int Se = state->cinfo->lim_Se;
+  const int * natural_order = state->cinfo->natural_order;
+
+  /* Encode the DC coefficient difference per section F.1.2.1 */
+
+  temp = temp2 = block[0] - last_dc_val;
+
+  if (temp < 0) {
+    temp = -temp;		/* temp is abs value of input */
+    /* For a negative input, want temp2 = bitwise complement of abs(input) */
+    /* This code assumes we are on a two's complement machine */
+    temp2--;
+  }
+
+  /* Find the number of bits needed for the magnitude of the coefficient */
+  nbits = 0;
+  while (temp) {
+    nbits++;
+    temp >>= 1;
+  }
+  /* Check for out-of-range coefficient values.
+   * Since we're encoding a difference, the range limit is twice as much.
+   */
+  if (nbits > MAX_COEF_BITS+1)
+    ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
+
+  /* Emit the Huffman-coded symbol for the number of bits */
+  if (! emit_bits_s(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits]))
+    return FALSE;
+
+  /* Emit that number of bits of the value, if positive, */
+  /* or the complement of its magnitude, if negative. */
+  if (nbits)			/* emit_bits rejects calls with size 0 */
+    if (! emit_bits_s(state, (unsigned int) temp2, nbits))
+      return FALSE;
+
+  /* Encode the AC coefficients per section F.1.2.2 */
+
+  r = 0;			/* r = run length of zeros */
+
+  for (k = 1; k <= Se; k++) {
+    if ((temp = block[natural_order[k]]) == 0) {
+      r++;
+    } else {
+      /* if run length > 15, must emit special run-length-16 codes (0xF0) */
+      while (r > 15) {
+	if (! emit_bits_s(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0]))
+	  return FALSE;
+	r -= 16;
+      }
+
+      temp2 = temp;
+      if (temp < 0) {
+	temp = -temp;		/* temp is abs value of input */
+	/* This code assumes we are on a two's complement machine */
+	temp2--;
+      }
+
+      /* Find the number of bits needed for the magnitude of the coefficient */
+      nbits = 1;		/* there must be at least one 1 bit */
+      while ((temp >>= 1))
+	nbits++;
+      /* Check for out-of-range coefficient values */
+      if (nbits > MAX_COEF_BITS)
+	ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
+
+      /* Emit Huffman symbol for run length / number of bits */
+      i = (r << 4) + nbits;
+      if (! emit_bits_s(state, actbl->ehufco[i], actbl->ehufsi[i]))
+	return FALSE;
+
+      /* Emit that number of bits of the value, if positive, */
+      /* or the complement of its magnitude, if negative. */
+      if (! emit_bits_s(state, (unsigned int) temp2, nbits))
+	return FALSE;
+
+      r = 0;
+    }
+  }
+
+  /* If the last coef(s) were zero, emit an end-of-block code */
+  if (r > 0)
+    if (! emit_bits_s(state, actbl->ehufco[0], actbl->ehufsi[0]))
+      return FALSE;
+
+  return TRUE;
+}
+
+
+/*
+ * Encode and output one MCU's worth of Huffman-compressed coefficients.
+ */
+
+METHODDEF(boolean)
+encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  working_state state;
+  int blkn, ci;
+  jpeg_component_info * compptr;
+
+  /* Load up working state */
+  state.next_output_byte = cinfo->dest->next_output_byte;
+  state.free_in_buffer = cinfo->dest->free_in_buffer;
+  ASSIGN_STATE(state.cur, entropy->saved);
+  state.cinfo = cinfo;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (! emit_restart_s(&state, entropy->next_restart_num))
+	return FALSE;
+  }
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+    if (! encode_one_block(&state,
+			   MCU_data[blkn][0], state.cur.last_dc_val[ci],
+			   entropy->dc_derived_tbls[compptr->dc_tbl_no],
+			   entropy->ac_derived_tbls[compptr->ac_tbl_no]))
+      return FALSE;
+    /* Update last_dc_val */
+    state.cur.last_dc_val[ci] = MCU_data[blkn][0][0];
+  }
+
+  /* Completed MCU, so update state */
+  cinfo->dest->next_output_byte = state.next_output_byte;
+  cinfo->dest->free_in_buffer = state.free_in_buffer;
+  ASSIGN_STATE(entropy->saved, state.cur);
+
+  /* Update restart-interval state too */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Finish up at the end of a Huffman-compressed scan.
+ */
+
+METHODDEF(void)
+finish_pass_huff (j_compress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  working_state state;
+
+  if (cinfo->progressive_mode) {
+    entropy->next_output_byte = cinfo->dest->next_output_byte;
+    entropy->free_in_buffer = cinfo->dest->free_in_buffer;
+
+    /* Flush out any buffered data */
+    emit_eobrun(entropy);
+    flush_bits_e(entropy);
+
+    cinfo->dest->next_output_byte = entropy->next_output_byte;
+    cinfo->dest->free_in_buffer = entropy->free_in_buffer;
+  } else {
+    /* Load up working state ... flush_bits needs it */
+    state.next_output_byte = cinfo->dest->next_output_byte;
+    state.free_in_buffer = cinfo->dest->free_in_buffer;
+    ASSIGN_STATE(state.cur, entropy->saved);
+    state.cinfo = cinfo;
+
+    /* Flush out the last data */
+    if (! flush_bits_s(&state))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+
+    /* Update state */
+    cinfo->dest->next_output_byte = state.next_output_byte;
+    cinfo->dest->free_in_buffer = state.free_in_buffer;
+    ASSIGN_STATE(entropy->saved, state.cur);
+  }
+}
+
+
+/*
+ * Huffman coding optimization.
+ *
+ * We first scan the supplied data and count the number of uses of each symbol
+ * that is to be Huffman-coded. (This process MUST agree with the code above.)
+ * Then we build a Huffman coding tree for the observed counts.
+ * Symbols which are not needed at all for the particular image are not
+ * assigned any code, which saves space in the DHT marker as well as in
+ * the compressed data.
+ */
+
+
+/* Process a single block's worth of coefficients */
+
+LOCAL(void)
+htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
+		 long dc_counts[], long ac_counts[])
+{
+  register int temp;
+  register int nbits;
+  register int k, r;
+  int Se = cinfo->lim_Se;
+  const int * natural_order = cinfo->natural_order;
+  
+  /* Encode the DC coefficient difference per section F.1.2.1 */
+  
+  temp = block[0] - last_dc_val;
+  if (temp < 0)
+    temp = -temp;
+  
+  /* Find the number of bits needed for the magnitude of the coefficient */
+  nbits = 0;
+  while (temp) {
+    nbits++;
+    temp >>= 1;
+  }
+  /* Check for out-of-range coefficient values.
+   * Since we're encoding a difference, the range limit is twice as much.
+   */
+  if (nbits > MAX_COEF_BITS+1)
+    ERREXIT(cinfo, JERR_BAD_DCT_COEF);
+
+  /* Count the Huffman symbol for the number of bits */
+  dc_counts[nbits]++;
+  
+  /* Encode the AC coefficients per section F.1.2.2 */
+  
+  r = 0;			/* r = run length of zeros */
+  
+  for (k = 1; k <= Se; k++) {
+    if ((temp = block[natural_order[k]]) == 0) {
+      r++;
+    } else {
+      /* if run length > 15, must emit special run-length-16 codes (0xF0) */
+      while (r > 15) {
+	ac_counts[0xF0]++;
+	r -= 16;
+      }
+      
+      /* Find the number of bits needed for the magnitude of the coefficient */
+      if (temp < 0)
+	temp = -temp;
+      
+      /* Find the number of bits needed for the magnitude of the coefficient */
+      nbits = 1;		/* there must be at least one 1 bit */
+      while ((temp >>= 1))
+	nbits++;
+      /* Check for out-of-range coefficient values */
+      if (nbits > MAX_COEF_BITS)
+	ERREXIT(cinfo, JERR_BAD_DCT_COEF);
+      
+      /* Count Huffman symbol for run length / number of bits */
+      ac_counts[(r << 4) + nbits]++;
+      
+      r = 0;
+    }
+  }
+
+  /* If the last coef(s) were zero, emit an end-of-block code */
+  if (r > 0)
+    ac_counts[0]++;
+}
+
+
+/*
+ * Trial-encode one MCU's worth of Huffman-compressed coefficients.
+ * No data is actually output, so no suspension return is possible.
+ */
+
+METHODDEF(boolean)
+encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int blkn, ci;
+  jpeg_component_info * compptr;
+
+  /* Take care of restart intervals if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      /* Re-initialize DC predictions to 0 */
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++)
+	entropy->saved.last_dc_val[ci] = 0;
+      /* Update restart state */
+      entropy->restarts_to_go = cinfo->restart_interval;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+    htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci],
+		    entropy->dc_count_ptrs[compptr->dc_tbl_no],
+		    entropy->ac_count_ptrs[compptr->ac_tbl_no]);
+    entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0];
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Generate the best Huffman code table for the given counts, fill htbl.
+ *
+ * The JPEG standard requires that no symbol be assigned a codeword of all
+ * one bits (so that padding bits added at the end of a compressed segment
+ * can't look like a valid code).  Because of the canonical ordering of
+ * codewords, this just means that there must be an unused slot in the
+ * longest codeword length category.  Section K.2 of the JPEG spec suggests
+ * reserving such a slot by pretending that symbol 256 is a valid symbol
+ * with count 1.  In theory that's not optimal; giving it count zero but
+ * including it in the symbol set anyway should give a better Huffman code.
+ * But the theoretically better code actually seems to come out worse in
+ * practice, because it produces more all-ones bytes (which incur stuffed
+ * zero bytes in the final file).  In any case the difference is tiny.
+ *
+ * The JPEG standard requires Huffman codes to be no more than 16 bits long.
+ * If some symbols have a very small but nonzero probability, the Huffman tree
+ * must be adjusted to meet the code length restriction.  We currently use
+ * the adjustment method suggested in JPEG section K.2.  This method is *not*
+ * optimal; it may not choose the best possible limited-length code.  But
+ * typically only very-low-frequency symbols will be given less-than-optimal
+ * lengths, so the code is almost optimal.  Experimental comparisons against
+ * an optimal limited-length-code algorithm indicate that the difference is
+ * microscopic --- usually less than a hundredth of a percent of total size.
+ * So the extra complexity of an optimal algorithm doesn't seem worthwhile.
+ */
+
+LOCAL(void)
+jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[])
+{
+#define MAX_CLEN 32		/* assumed maximum initial code length */
+  UINT8 bits[MAX_CLEN+1];	/* bits[k] = # of symbols with code length k */
+  int codesize[257];		/* codesize[k] = code length of symbol k */
+  int others[257];		/* next symbol in current branch of tree */
+  int c1, c2;
+  int p, i, j;
+  long v;
+
+  /* This algorithm is explained in section K.2 of the JPEG standard */
+
+  MEMZERO(bits, SIZEOF(bits));
+  MEMZERO(codesize, SIZEOF(codesize));
+  for (i = 0; i < 257; i++)
+    others[i] = -1;		/* init links to empty */
+  
+  freq[256] = 1;		/* make sure 256 has a nonzero count */
+  /* Including the pseudo-symbol 256 in the Huffman procedure guarantees
+   * that no real symbol is given code-value of all ones, because 256
+   * will be placed last in the largest codeword category.
+   */
+
+  /* Huffman's basic algorithm to assign optimal code lengths to symbols */
+
+  for (;;) {
+    /* Find the smallest nonzero frequency, set c1 = its symbol */
+    /* In case of ties, take the larger symbol number */
+    c1 = -1;
+    v = 1000000000L;
+    for (i = 0; i <= 256; i++) {
+      if (freq[i] && freq[i] <= v) {
+	v = freq[i];
+	c1 = i;
+      }
+    }
+
+    /* Find the next smallest nonzero frequency, set c2 = its symbol */
+    /* In case of ties, take the larger symbol number */
+    c2 = -1;
+    v = 1000000000L;
+    for (i = 0; i <= 256; i++) {
+      if (freq[i] && freq[i] <= v && i != c1) {
+	v = freq[i];
+	c2 = i;
+      }
+    }
+
+    /* Done if we've merged everything into one frequency */
+    if (c2 < 0)
+      break;
+    
+    /* Else merge the two counts/trees */
+    freq[c1] += freq[c2];
+    freq[c2] = 0;
+
+    /* Increment the codesize of everything in c1's tree branch */
+    codesize[c1]++;
+    while (others[c1] >= 0) {
+      c1 = others[c1];
+      codesize[c1]++;
+    }
+    
+    others[c1] = c2;		/* chain c2 onto c1's tree branch */
+    
+    /* Increment the codesize of everything in c2's tree branch */
+    codesize[c2]++;
+    while (others[c2] >= 0) {
+      c2 = others[c2];
+      codesize[c2]++;
+    }
+  }
+
+  /* Now count the number of symbols of each code length */
+  for (i = 0; i <= 256; i++) {
+    if (codesize[i]) {
+      /* The JPEG standard seems to think that this can't happen, */
+      /* but I'm paranoid... */
+      if (codesize[i] > MAX_CLEN)
+	ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW);
+
+      bits[codesize[i]]++;
+    }
+  }
+
+  /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure
+   * Huffman procedure assigned any such lengths, we must adjust the coding.
+   * Here is what the JPEG spec says about how this next bit works:
+   * Since symbols are paired for the longest Huffman code, the symbols are
+   * removed from this length category two at a time.  The prefix for the pair
+   * (which is one bit shorter) is allocated to one of the pair; then,
+   * skipping the BITS entry for that prefix length, a code word from the next
+   * shortest nonzero BITS entry is converted into a prefix for two code words
+   * one bit longer.
+   */
+  
+  for (i = MAX_CLEN; i > 16; i--) {
+    while (bits[i] > 0) {
+      j = i - 2;		/* find length of new prefix to be used */
+      while (bits[j] == 0)
+	j--;
+      
+      bits[i] -= 2;		/* remove two symbols */
+      bits[i-1]++;		/* one goes in this length */
+      bits[j+1] += 2;		/* two new symbols in this length */
+      bits[j]--;		/* symbol of this length is now a prefix */
+    }
+  }
+
+  /* Remove the count for the pseudo-symbol 256 from the largest codelength */
+  while (bits[i] == 0)		/* find largest codelength still in use */
+    i--;
+  bits[i]--;
+  
+  /* Return final symbol counts (only for lengths 0..16) */
+  MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits));
+  
+  /* Return a list of the symbols sorted by code length */
+  /* It's not real clear to me why we don't need to consider the codelength
+   * changes made above, but the JPEG spec seems to think this works.
+   */
+  p = 0;
+  for (i = 1; i <= MAX_CLEN; i++) {
+    for (j = 0; j <= 255; j++) {
+      if (codesize[j] == i) {
+	htbl->huffval[p] = (UINT8) j;
+	p++;
+      }
+    }
+  }
+
+  /* Set sent_table FALSE so updated table will be written to JPEG file. */
+  htbl->sent_table = FALSE;
+}
+
+
+/*
+ * Finish up a statistics-gathering pass and create the new Huffman tables.
+ */
+
+METHODDEF(void)
+finish_pass_gather (j_compress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int ci, tbl;
+  jpeg_component_info * compptr;
+  JHUFF_TBL **htblptr;
+  boolean did_dc[NUM_HUFF_TBLS];
+  boolean did_ac[NUM_HUFF_TBLS];
+
+  /* It's important not to apply jpeg_gen_optimal_table more than once
+   * per table, because it clobbers the input frequency counts!
+   */
+  if (cinfo->progressive_mode)
+    /* Flush out buffered data (all we care about is counting the EOB symbol) */
+    emit_eobrun(entropy);
+
+  MEMZERO(did_dc, SIZEOF(did_dc));
+  MEMZERO(did_ac, SIZEOF(did_ac));
+
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* DC needs no table for refinement scan */
+    if (cinfo->Ss == 0 && cinfo->Ah == 0) {
+      tbl = compptr->dc_tbl_no;
+      if (! did_dc[tbl]) {
+	htblptr = & cinfo->dc_huff_tbl_ptrs[tbl];
+	if (*htblptr == NULL)
+	  *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
+	jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[tbl]);
+	did_dc[tbl] = TRUE;
+      }
+    }
+    /* AC needs no table when not present */
+    if (cinfo->Se) {
+      tbl = compptr->ac_tbl_no;
+      if (! did_ac[tbl]) {
+	htblptr = & cinfo->ac_huff_tbl_ptrs[tbl];
+	if (*htblptr == NULL)
+	  *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
+	jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[tbl]);
+	did_ac[tbl] = TRUE;
+      }
+    }
+  }
+}
+
+
+/*
+ * Initialize for a Huffman-compressed scan.
+ * If gather_statistics is TRUE, we do not output anything during the scan,
+ * just count the Huffman symbols used and generate Huffman code tables.
+ */
+
+METHODDEF(void)
+start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int ci, tbl;
+  jpeg_component_info * compptr;
+
+  if (gather_statistics)
+    entropy->pub.finish_pass = finish_pass_gather;
+  else
+    entropy->pub.finish_pass = finish_pass_huff;
+
+  if (cinfo->progressive_mode) {
+    entropy->cinfo = cinfo;
+    entropy->gather_statistics = gather_statistics;
+
+    /* We assume jcmaster.c already validated the scan parameters. */
+
+    /* Select execution routine */
+    if (cinfo->Ah == 0) {
+      if (cinfo->Ss == 0)
+	entropy->pub.encode_mcu = encode_mcu_DC_first;
+      else
+	entropy->pub.encode_mcu = encode_mcu_AC_first;
+    } else {
+      if (cinfo->Ss == 0)
+	entropy->pub.encode_mcu = encode_mcu_DC_refine;
+      else {
+	entropy->pub.encode_mcu = encode_mcu_AC_refine;
+	/* AC refinement needs a correction bit buffer */
+	if (entropy->bit_buffer == NULL)
+	  entropy->bit_buffer = (char *)
+	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+					MAX_CORR_BITS * SIZEOF(char));
+      }
+    }
+
+    /* Initialize AC stuff */
+    entropy->ac_tbl_no = cinfo->cur_comp_info[0]->ac_tbl_no;
+    entropy->EOBRUN = 0;
+    entropy->BE = 0;
+  } else {
+    if (gather_statistics)
+      entropy->pub.encode_mcu = encode_mcu_gather;
+    else
+      entropy->pub.encode_mcu = encode_mcu_huff;
+  }
+
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* DC needs no table for refinement scan */
+    if (cinfo->Ss == 0 && cinfo->Ah == 0) {
+      tbl = compptr->dc_tbl_no;
+      if (gather_statistics) {
+	/* Check for invalid table index */
+	/* (make_c_derived_tbl does this in the other path) */
+	if (tbl < 0 || tbl >= NUM_HUFF_TBLS)
+	  ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl);
+	/* Allocate and zero the statistics tables */
+	/* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
+	if (entropy->dc_count_ptrs[tbl] == NULL)
+	  entropy->dc_count_ptrs[tbl] = (long *)
+	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+					257 * SIZEOF(long));
+	MEMZERO(entropy->dc_count_ptrs[tbl], 257 * SIZEOF(long));
+      } else {
+	/* Compute derived values for Huffman tables */
+	/* We may do this more than once for a table, but it's not expensive */
+	jpeg_make_c_derived_tbl(cinfo, TRUE, tbl,
+				& entropy->dc_derived_tbls[tbl]);
+      }
+      /* Initialize DC predictions to 0 */
+      entropy->saved.last_dc_val[ci] = 0;
+    }
+    /* AC needs no table when not present */
+    if (cinfo->Se) {
+      tbl = compptr->ac_tbl_no;
+      if (gather_statistics) {
+	if (tbl < 0 || tbl >= NUM_HUFF_TBLS)
+	  ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl);
+	if (entropy->ac_count_ptrs[tbl] == NULL)
+	  entropy->ac_count_ptrs[tbl] = (long *)
+	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+					257 * SIZEOF(long));
+	MEMZERO(entropy->ac_count_ptrs[tbl], 257 * SIZEOF(long));
+      } else {
+	jpeg_make_c_derived_tbl(cinfo, FALSE, tbl,
+				& entropy->ac_derived_tbls[tbl]);
+      }
+    }
+  }
+
+  /* Initialize bit buffer to empty */
+  entropy->saved.put_buffer = 0;
+  entropy->saved.put_bits = 0;
+
+  /* Initialize restart stuff */
+  entropy->restarts_to_go = cinfo->restart_interval;
+  entropy->next_restart_num = 0;
+}
+
+
+/*
+ * Module initialization routine for Huffman entropy encoding.
+ */
+
+GLOBAL(void)
+jinit_huff_encoder (j_compress_ptr cinfo)
+{
+  huff_entropy_ptr entropy;
+  int i;
+
+  entropy = (huff_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(huff_entropy_encoder));
+  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
+  entropy->pub.start_pass = start_pass_huff;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL;
+    entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL;
+  }
+
+  if (cinfo->progressive_mode)
+    entropy->bit_buffer = NULL;	/* needed only in AC refinement scan */
+}
diff --git a/jpeg-8d/jcinit.c b/jpeg-8d/jcinit.c
new file mode 100644
index 0000000..0ba310f
--- /dev/null
+++ b/jpeg-8d/jcinit.c
@@ -0,0 +1,65 @@
+/*
+ * jcinit.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains initialization logic for the JPEG compressor.
+ * This routine is in charge of selecting the modules to be executed and
+ * making an initialization call to each one.
+ *
+ * Logically, this code belongs in jcmaster.c.  It's split out because
+ * linking this routine implies linking the entire compression library.
+ * For a transcoding-only application, we want to be able to use jcmaster.c
+ * without linking in the whole library.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * Master selection of compression modules.
+ * This is done once at the start of processing an image.  We determine
+ * which modules will be used and give them appropriate initialization calls.
+ */
+
+GLOBAL(void)
+jinit_compress_master (j_compress_ptr cinfo)
+{
+  /* Initialize master control (includes parameter checking/processing) */
+  jinit_c_master_control(cinfo, FALSE /* full compression */);
+
+  /* Preprocessing */
+  if (! cinfo->raw_data_in) {
+    jinit_color_converter(cinfo);
+    jinit_downsampler(cinfo);
+    jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */);
+  }
+  /* Forward DCT */
+  jinit_forward_dct(cinfo);
+  /* Entropy encoding: either Huffman or arithmetic coding. */
+  if (cinfo->arith_code)
+    jinit_arith_encoder(cinfo);
+  else {
+    jinit_huff_encoder(cinfo);
+  }
+
+  /* Need a full-image coefficient buffer in any multi-pass mode. */
+  jinit_c_coef_controller(cinfo,
+		(boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding));
+  jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */);
+
+  jinit_marker_writer(cinfo);
+
+  /* We can now tell the memory manager to allocate virtual arrays. */
+  (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
+
+  /* Write the datastream header (SOI) immediately.
+   * Frame and scan headers are postponed till later.
+   * This lets application insert special markers after the SOI.
+   */
+  (*cinfo->marker->write_file_header) (cinfo);
+}
diff --git a/jpeg-8d/jcmainct.c b/jpeg-8d/jcmainct.c
new file mode 100644
index 0000000..7de75d1
--- /dev/null
+++ b/jpeg-8d/jcmainct.c
@@ -0,0 +1,293 @@
+/*
+ * jcmainct.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the main buffer controller for compression.
+ * The main buffer lies between the pre-processor and the JPEG
+ * compressor proper; it holds downsampled data in the JPEG colorspace.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Note: currently, there is no operating mode in which a full-image buffer
+ * is needed at this step.  If there were, that mode could not be used with
+ * "raw data" input, since this module is bypassed in that case.  However,
+ * we've left the code here for possible use in special applications.
+ */
+#undef FULL_MAIN_BUFFER_SUPPORTED
+
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_c_main_controller pub; /* public fields */
+
+  JDIMENSION cur_iMCU_row;	/* number of current iMCU row */
+  JDIMENSION rowgroup_ctr;	/* counts row groups received in iMCU row */
+  boolean suspended;		/* remember if we suspended output */
+  J_BUF_MODE pass_mode;		/* current operating mode */
+
+  /* If using just a strip buffer, this points to the entire set of buffers
+   * (we allocate one for each component).  In the full-image case, this
+   * points to the currently accessible strips of the virtual arrays.
+   */
+  JSAMPARRAY buffer[MAX_COMPONENTS];
+
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+  /* If using full-image storage, this array holds pointers to virtual-array
+   * control blocks for each component.  Unused if not full-image storage.
+   */
+  jvirt_sarray_ptr whole_image[MAX_COMPONENTS];
+#endif
+} my_main_controller;
+
+typedef my_main_controller * my_main_ptr;
+
+
+/* Forward declarations */
+METHODDEF(void) process_data_simple_main
+	JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf,
+	     JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail));
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+METHODDEF(void) process_data_buffer_main
+	JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf,
+	     JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail));
+#endif
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF(void)
+start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+
+  /* Do nothing in raw-data mode. */
+  if (cinfo->raw_data_in)
+    return;
+
+  main->cur_iMCU_row = 0;	/* initialize counters */
+  main->rowgroup_ctr = 0;
+  main->suspended = FALSE;
+  main->pass_mode = pass_mode;	/* save mode for use by process_data */
+
+  switch (pass_mode) {
+  case JBUF_PASS_THRU:
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+    if (main->whole_image[0] != NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+#endif
+    main->pub.process_data = process_data_simple_main;
+    break;
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+  case JBUF_SAVE_SOURCE:
+  case JBUF_CRANK_DEST:
+  case JBUF_SAVE_AND_PASS:
+    if (main->whole_image[0] == NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    main->pub.process_data = process_data_buffer_main;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    break;
+  }
+}
+
+
+/*
+ * Process some data.
+ * This routine handles the simple pass-through mode,
+ * where we have only a strip buffer.
+ */
+
+METHODDEF(void)
+process_data_simple_main (j_compress_ptr cinfo,
+			  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+			  JDIMENSION in_rows_avail)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+
+  while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
+    /* Read input data if we haven't filled the main buffer yet */
+    if (main->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size)
+      (*cinfo->prep->pre_process_data) (cinfo,
+					input_buf, in_row_ctr, in_rows_avail,
+					main->buffer, &main->rowgroup_ctr,
+					(JDIMENSION) cinfo->min_DCT_v_scaled_size);
+
+    /* If we don't have a full iMCU row buffered, return to application for
+     * more data.  Note that preprocessor will always pad to fill the iMCU row
+     * at the bottom of the image.
+     */
+    if (main->rowgroup_ctr != (JDIMENSION) cinfo->min_DCT_v_scaled_size)
+      return;
+
+    /* Send the completed row to the compressor */
+    if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
+      /* If compressor did not consume the whole row, then we must need to
+       * suspend processing and return to the application.  In this situation
+       * we pretend we didn't yet consume the last input row; otherwise, if
+       * it happened to be the last row of the image, the application would
+       * think we were done.
+       */
+      if (! main->suspended) {
+	(*in_row_ctr)--;
+	main->suspended = TRUE;
+      }
+      return;
+    }
+    /* We did finish the row.  Undo our little suspension hack if a previous
+     * call suspended; then mark the main buffer empty.
+     */
+    if (main->suspended) {
+      (*in_row_ctr)++;
+      main->suspended = FALSE;
+    }
+    main->rowgroup_ctr = 0;
+    main->cur_iMCU_row++;
+  }
+}
+
+
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+
+/*
+ * Process some data.
+ * This routine handles all of the modes that use a full-size buffer.
+ */
+
+METHODDEF(void)
+process_data_buffer_main (j_compress_ptr cinfo,
+			  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+			  JDIMENSION in_rows_avail)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  int ci;
+  jpeg_component_info *compptr;
+  boolean writing = (main->pass_mode != JBUF_CRANK_DEST);
+
+  while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
+    /* Realign the virtual buffers if at the start of an iMCU row. */
+    if (main->rowgroup_ctr == 0) {
+      for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	   ci++, compptr++) {
+	main->buffer[ci] = (*cinfo->mem->access_virt_sarray)
+	  ((j_common_ptr) cinfo, main->whole_image[ci],
+	   main->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE),
+	   (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing);
+      }
+      /* In a read pass, pretend we just read some source data. */
+      if (! writing) {
+	*in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE;
+	main->rowgroup_ctr = DCTSIZE;
+      }
+    }
+
+    /* If a write pass, read input data until the current iMCU row is full. */
+    /* Note: preprocessor will pad if necessary to fill the last iMCU row. */
+    if (writing) {
+      (*cinfo->prep->pre_process_data) (cinfo,
+					input_buf, in_row_ctr, in_rows_avail,
+					main->buffer, &main->rowgroup_ctr,
+					(JDIMENSION) DCTSIZE);
+      /* Return to application if we need more data to fill the iMCU row. */
+      if (main->rowgroup_ctr < DCTSIZE)
+	return;
+    }
+
+    /* Emit data, unless this is a sink-only pass. */
+    if (main->pass_mode != JBUF_SAVE_SOURCE) {
+      if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
+	/* If compressor did not consume the whole row, then we must need to
+	 * suspend processing and return to the application.  In this situation
+	 * we pretend we didn't yet consume the last input row; otherwise, if
+	 * it happened to be the last row of the image, the application would
+	 * think we were done.
+	 */
+	if (! main->suspended) {
+	  (*in_row_ctr)--;
+	  main->suspended = TRUE;
+	}
+	return;
+      }
+      /* We did finish the row.  Undo our little suspension hack if a previous
+       * call suspended; then mark the main buffer empty.
+       */
+      if (main->suspended) {
+	(*in_row_ctr)++;
+	main->suspended = FALSE;
+      }
+    }
+
+    /* If get here, we are done with this iMCU row.  Mark buffer empty. */
+    main->rowgroup_ctr = 0;
+    main->cur_iMCU_row++;
+  }
+}
+
+#endif /* FULL_MAIN_BUFFER_SUPPORTED */
+
+
+/*
+ * Initialize main buffer controller.
+ */
+
+GLOBAL(void)
+jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer)
+{
+  my_main_ptr main;
+  int ci;
+  jpeg_component_info *compptr;
+
+  main = (my_main_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_main_controller));
+  cinfo->main = (struct jpeg_c_main_controller *) main;
+  main->pub.start_pass = start_pass_main;
+
+  /* We don't need to create a buffer in raw-data mode. */
+  if (cinfo->raw_data_in)
+    return;
+
+  /* Create the buffer.  It holds downsampled data, so each component
+   * may be of a different size.
+   */
+  if (need_full_buffer) {
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+    /* Allocate a full-image virtual array for each component */
+    /* Note we pad the bottom to a multiple of the iMCU height */
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      main->whole_image[ci] = (*cinfo->mem->request_virt_sarray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+	 compptr->width_in_blocks * compptr->DCT_h_scaled_size,
+	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
+				(long) compptr->v_samp_factor) * DCTSIZE,
+	 (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size));
+    }
+#else
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+#endif
+  } else {
+#ifdef FULL_MAIN_BUFFER_SUPPORTED
+    main->whole_image[0] = NULL; /* flag for no virtual arrays */
+#endif
+    /* Allocate a strip buffer for each component */
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      main->buffer[ci] = (*cinfo->mem->alloc_sarray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE,
+	 compptr->width_in_blocks * compptr->DCT_h_scaled_size,
+	 (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size));
+    }
+  }
+}
diff --git a/jpeg-8d/jcmarker.c b/jpeg-8d/jcmarker.c
new file mode 100644
index 0000000..606c19a
--- /dev/null
+++ b/jpeg-8d/jcmarker.c
@@ -0,0 +1,682 @@
+/*
+ * jcmarker.c
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2003-2010 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to write JPEG datastream markers.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+typedef enum {			/* JPEG marker codes */
+  M_SOF0  = 0xc0,
+  M_SOF1  = 0xc1,
+  M_SOF2  = 0xc2,
+  M_SOF3  = 0xc3,
+  
+  M_SOF5  = 0xc5,
+  M_SOF6  = 0xc6,
+  M_SOF7  = 0xc7,
+  
+  M_JPG   = 0xc8,
+  M_SOF9  = 0xc9,
+  M_SOF10 = 0xca,
+  M_SOF11 = 0xcb,
+  
+  M_SOF13 = 0xcd,
+  M_SOF14 = 0xce,
+  M_SOF15 = 0xcf,
+  
+  M_DHT   = 0xc4,
+  
+  M_DAC   = 0xcc,
+  
+  M_RST0  = 0xd0,
+  M_RST1  = 0xd1,
+  M_RST2  = 0xd2,
+  M_RST3  = 0xd3,
+  M_RST4  = 0xd4,
+  M_RST5  = 0xd5,
+  M_RST6  = 0xd6,
+  M_RST7  = 0xd7,
+  
+  M_SOI   = 0xd8,
+  M_EOI   = 0xd9,
+  M_SOS   = 0xda,
+  M_DQT   = 0xdb,
+  M_DNL   = 0xdc,
+  M_DRI   = 0xdd,
+  M_DHP   = 0xde,
+  M_EXP   = 0xdf,
+  
+  M_APP0  = 0xe0,
+  M_APP1  = 0xe1,
+  M_APP2  = 0xe2,
+  M_APP3  = 0xe3,
+  M_APP4  = 0xe4,
+  M_APP5  = 0xe5,
+  M_APP6  = 0xe6,
+  M_APP7  = 0xe7,
+  M_APP8  = 0xe8,
+  M_APP9  = 0xe9,
+  M_APP10 = 0xea,
+  M_APP11 = 0xeb,
+  M_APP12 = 0xec,
+  M_APP13 = 0xed,
+  M_APP14 = 0xee,
+  M_APP15 = 0xef,
+  
+  M_JPG0  = 0xf0,
+  M_JPG13 = 0xfd,
+  M_COM   = 0xfe,
+  
+  M_TEM   = 0x01,
+  
+  M_ERROR = 0x100
+} JPEG_MARKER;
+
+
+/* Private state */
+
+typedef struct {
+  struct jpeg_marker_writer pub; /* public fields */
+
+  unsigned int last_restart_interval; /* last DRI value emitted; 0 after SOI */
+} my_marker_writer;
+
+typedef my_marker_writer * my_marker_ptr;
+
+
+/*
+ * Basic output routines.
+ *
+ * Note that we do not support suspension while writing a marker.
+ * Therefore, an application using suspension must ensure that there is
+ * enough buffer space for the initial markers (typ. 600-700 bytes) before
+ * calling jpeg_start_compress, and enough space to write the trailing EOI
+ * (a few bytes) before calling jpeg_finish_compress.  Multipass compression
+ * modes are not supported at all with suspension, so those two are the only
+ * points where markers will be written.
+ */
+
+LOCAL(void)
+emit_byte (j_compress_ptr cinfo, int val)
+/* Emit a byte */
+{
+  struct jpeg_destination_mgr * dest = cinfo->dest;
+
+  *(dest->next_output_byte)++ = (JOCTET) val;
+  if (--dest->free_in_buffer == 0) {
+    if (! (*dest->empty_output_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+  }
+}
+
+
+LOCAL(void)
+emit_marker (j_compress_ptr cinfo, JPEG_MARKER mark)
+/* Emit a marker code */
+{
+  emit_byte(cinfo, 0xFF);
+  emit_byte(cinfo, (int) mark);
+}
+
+
+LOCAL(void)
+emit_2bytes (j_compress_ptr cinfo, int value)
+/* Emit a 2-byte integer; these are always MSB first in JPEG files */
+{
+  emit_byte(cinfo, (value >> 8) & 0xFF);
+  emit_byte(cinfo, value & 0xFF);
+}
+
+
+/*
+ * Routines to write specific marker types.
+ */
+
+LOCAL(int)
+emit_dqt (j_compress_ptr cinfo, int index)
+/* Emit a DQT marker */
+/* Returns the precision used (0 = 8bits, 1 = 16bits) for baseline checking */
+{
+  JQUANT_TBL * qtbl = cinfo->quant_tbl_ptrs[index];
+  int prec;
+  int i;
+
+  if (qtbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index);
+
+  prec = 0;
+  for (i = 0; i <= cinfo->lim_Se; i++) {
+    if (qtbl->quantval[cinfo->natural_order[i]] > 255)
+      prec = 1;
+  }
+
+  if (! qtbl->sent_table) {
+    emit_marker(cinfo, M_DQT);
+
+    emit_2bytes(cinfo,
+      prec ? cinfo->lim_Se * 2 + 2 + 1 + 2 : cinfo->lim_Se + 1 + 1 + 2);
+
+    emit_byte(cinfo, index + (prec<<4));
+
+    for (i = 0; i <= cinfo->lim_Se; i++) {
+      /* The table entries must be emitted in zigzag order. */
+      unsigned int qval = qtbl->quantval[cinfo->natural_order[i]];
+      if (prec)
+	emit_byte(cinfo, (int) (qval >> 8));
+      emit_byte(cinfo, (int) (qval & 0xFF));
+    }
+
+    qtbl->sent_table = TRUE;
+  }
+
+  return prec;
+}
+
+
+LOCAL(void)
+emit_dht (j_compress_ptr cinfo, int index, boolean is_ac)
+/* Emit a DHT marker */
+{
+  JHUFF_TBL * htbl;
+  int length, i;
+  
+  if (is_ac) {
+    htbl = cinfo->ac_huff_tbl_ptrs[index];
+    index += 0x10;		/* output index has AC bit set */
+  } else {
+    htbl = cinfo->dc_huff_tbl_ptrs[index];
+  }
+
+  if (htbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, index);
+  
+  if (! htbl->sent_table) {
+    emit_marker(cinfo, M_DHT);
+    
+    length = 0;
+    for (i = 1; i <= 16; i++)
+      length += htbl->bits[i];
+    
+    emit_2bytes(cinfo, length + 2 + 1 + 16);
+    emit_byte(cinfo, index);
+    
+    for (i = 1; i <= 16; i++)
+      emit_byte(cinfo, htbl->bits[i]);
+    
+    for (i = 0; i < length; i++)
+      emit_byte(cinfo, htbl->huffval[i]);
+    
+    htbl->sent_table = TRUE;
+  }
+}
+
+
+LOCAL(void)
+emit_dac (j_compress_ptr cinfo)
+/* Emit a DAC marker */
+/* Since the useful info is so small, we want to emit all the tables in */
+/* one DAC marker.  Therefore this routine does its own scan of the table. */
+{
+#ifdef C_ARITH_CODING_SUPPORTED
+  char dc_in_use[NUM_ARITH_TBLS];
+  char ac_in_use[NUM_ARITH_TBLS];
+  int length, i;
+  jpeg_component_info *compptr;
+
+  for (i = 0; i < NUM_ARITH_TBLS; i++)
+    dc_in_use[i] = ac_in_use[i] = 0;
+
+  for (i = 0; i < cinfo->comps_in_scan; i++) {
+    compptr = cinfo->cur_comp_info[i];
+    /* DC needs no table for refinement scan */
+    if (cinfo->Ss == 0 && cinfo->Ah == 0)
+      dc_in_use[compptr->dc_tbl_no] = 1;
+    /* AC needs no table when not present */
+    if (cinfo->Se)
+      ac_in_use[compptr->ac_tbl_no] = 1;
+  }
+
+  length = 0;
+  for (i = 0; i < NUM_ARITH_TBLS; i++)
+    length += dc_in_use[i] + ac_in_use[i];
+
+  if (length) {
+    emit_marker(cinfo, M_DAC);
+
+    emit_2bytes(cinfo, length*2 + 2);
+
+    for (i = 0; i < NUM_ARITH_TBLS; i++) {
+      if (dc_in_use[i]) {
+	emit_byte(cinfo, i);
+	emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4));
+      }
+      if (ac_in_use[i]) {
+	emit_byte(cinfo, i + 0x10);
+	emit_byte(cinfo, cinfo->arith_ac_K[i]);
+      }
+    }
+  }
+#endif /* C_ARITH_CODING_SUPPORTED */
+}
+
+
+LOCAL(void)
+emit_dri (j_compress_ptr cinfo)
+/* Emit a DRI marker */
+{
+  emit_marker(cinfo, M_DRI);
+  
+  emit_2bytes(cinfo, 4);	/* fixed length */
+
+  emit_2bytes(cinfo, (int) cinfo->restart_interval);
+}
+
+
+LOCAL(void)
+emit_sof (j_compress_ptr cinfo, JPEG_MARKER code)
+/* Emit a SOF marker */
+{
+  int ci;
+  jpeg_component_info *compptr;
+  
+  emit_marker(cinfo, code);
+  
+  emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */
+
+  /* Make sure image isn't bigger than SOF field can handle */
+  if ((long) cinfo->jpeg_height > 65535L ||
+      (long) cinfo->jpeg_width > 65535L)
+    ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535);
+
+  emit_byte(cinfo, cinfo->data_precision);
+  emit_2bytes(cinfo, (int) cinfo->jpeg_height);
+  emit_2bytes(cinfo, (int) cinfo->jpeg_width);
+
+  emit_byte(cinfo, cinfo->num_components);
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    emit_byte(cinfo, compptr->component_id);
+    emit_byte(cinfo, (compptr->h_samp_factor << 4) + compptr->v_samp_factor);
+    emit_byte(cinfo, compptr->quant_tbl_no);
+  }
+}
+
+
+LOCAL(void)
+emit_sos (j_compress_ptr cinfo)
+/* Emit a SOS marker */
+{
+  int i, td, ta;
+  jpeg_component_info *compptr;
+  
+  emit_marker(cinfo, M_SOS);
+  
+  emit_2bytes(cinfo, 2 * cinfo->comps_in_scan + 2 + 1 + 3); /* length */
+  
+  emit_byte(cinfo, cinfo->comps_in_scan);
+  
+  for (i = 0; i < cinfo->comps_in_scan; i++) {
+    compptr = cinfo->cur_comp_info[i];
+    emit_byte(cinfo, compptr->component_id);
+
+    /* We emit 0 for unused field(s); this is recommended by the P&M text
+     * but does not seem to be specified in the standard.
+     */
+
+    /* DC needs no table for refinement scan */
+    td = cinfo->Ss == 0 && cinfo->Ah == 0 ? compptr->dc_tbl_no : 0;
+    /* AC needs no table when not present */
+    ta = cinfo->Se ? compptr->ac_tbl_no : 0;
+
+    emit_byte(cinfo, (td << 4) + ta);
+  }
+
+  emit_byte(cinfo, cinfo->Ss);
+  emit_byte(cinfo, cinfo->Se);
+  emit_byte(cinfo, (cinfo->Ah << 4) + cinfo->Al);
+}
+
+
+LOCAL(void)
+emit_pseudo_sos (j_compress_ptr cinfo)
+/* Emit a pseudo SOS marker */
+{
+  emit_marker(cinfo, M_SOS);
+  
+  emit_2bytes(cinfo, 2 + 1 + 3); /* length */
+  
+  emit_byte(cinfo, 0); /* Ns */
+
+  emit_byte(cinfo, 0); /* Ss */
+  emit_byte(cinfo, cinfo->block_size * cinfo->block_size - 1); /* Se */
+  emit_byte(cinfo, 0); /* Ah/Al */
+}
+
+
+LOCAL(void)
+emit_jfif_app0 (j_compress_ptr cinfo)
+/* Emit a JFIF-compliant APP0 marker */
+{
+  /*
+   * Length of APP0 block	(2 bytes)
+   * Block ID			(4 bytes - ASCII "JFIF")
+   * Zero byte			(1 byte to terminate the ID string)
+   * Version Major, Minor	(2 bytes - major first)
+   * Units			(1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm)
+   * Xdpu			(2 bytes - dots per unit horizontal)
+   * Ydpu			(2 bytes - dots per unit vertical)
+   * Thumbnail X size		(1 byte)
+   * Thumbnail Y size		(1 byte)
+   */
+  
+  emit_marker(cinfo, M_APP0);
+  
+  emit_2bytes(cinfo, 2 + 4 + 1 + 2 + 1 + 2 + 2 + 1 + 1); /* length */
+
+  emit_byte(cinfo, 0x4A);	/* Identifier: ASCII "JFIF" */
+  emit_byte(cinfo, 0x46);
+  emit_byte(cinfo, 0x49);
+  emit_byte(cinfo, 0x46);
+  emit_byte(cinfo, 0);
+  emit_byte(cinfo, cinfo->JFIF_major_version); /* Version fields */
+  emit_byte(cinfo, cinfo->JFIF_minor_version);
+  emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */
+  emit_2bytes(cinfo, (int) cinfo->X_density);
+  emit_2bytes(cinfo, (int) cinfo->Y_density);
+  emit_byte(cinfo, 0);		/* No thumbnail image */
+  emit_byte(cinfo, 0);
+}
+
+
+LOCAL(void)
+emit_adobe_app14 (j_compress_ptr cinfo)
+/* Emit an Adobe APP14 marker */
+{
+  /*
+   * Length of APP14 block	(2 bytes)
+   * Block ID			(5 bytes - ASCII "Adobe")
+   * Version Number		(2 bytes - currently 100)
+   * Flags0			(2 bytes - currently 0)
+   * Flags1			(2 bytes - currently 0)
+   * Color transform		(1 byte)
+   *
+   * Although Adobe TN 5116 mentions Version = 101, all the Adobe files
+   * now in circulation seem to use Version = 100, so that's what we write.
+   *
+   * We write the color transform byte as 1 if the JPEG color space is
+   * YCbCr, 2 if it's YCCK, 0 otherwise.  Adobe's definition has to do with
+   * whether the encoder performed a transformation, which is pretty useless.
+   */
+  
+  emit_marker(cinfo, M_APP14);
+  
+  emit_2bytes(cinfo, 2 + 5 + 2 + 2 + 2 + 1); /* length */
+
+  emit_byte(cinfo, 0x41);	/* Identifier: ASCII "Adobe" */
+  emit_byte(cinfo, 0x64);
+  emit_byte(cinfo, 0x6F);
+  emit_byte(cinfo, 0x62);
+  emit_byte(cinfo, 0x65);
+  emit_2bytes(cinfo, 100);	/* Version */
+  emit_2bytes(cinfo, 0);	/* Flags0 */
+  emit_2bytes(cinfo, 0);	/* Flags1 */
+  switch (cinfo->jpeg_color_space) {
+  case JCS_YCbCr:
+    emit_byte(cinfo, 1);	/* Color transform = 1 */
+    break;
+  case JCS_YCCK:
+    emit_byte(cinfo, 2);	/* Color transform = 2 */
+    break;
+  default:
+    emit_byte(cinfo, 0);	/* Color transform = 0 */
+    break;
+  }
+}
+
+
+/*
+ * These routines allow writing an arbitrary marker with parameters.
+ * The only intended use is to emit COM or APPn markers after calling
+ * write_file_header and before calling write_frame_header.
+ * Other uses are not guaranteed to produce desirable results.
+ * Counting the parameter bytes properly is the caller's responsibility.
+ */
+
+METHODDEF(void)
+write_marker_header (j_compress_ptr cinfo, int marker, unsigned int datalen)
+/* Emit an arbitrary marker header */
+{
+  if (datalen > (unsigned int) 65533)		/* safety check */
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
+  emit_marker(cinfo, (JPEG_MARKER) marker);
+
+  emit_2bytes(cinfo, (int) (datalen + 2));	/* total length */
+}
+
+METHODDEF(void)
+write_marker_byte (j_compress_ptr cinfo, int val)
+/* Emit one byte of marker parameters following write_marker_header */
+{
+  emit_byte(cinfo, val);
+}
+
+
+/*
+ * Write datastream header.
+ * This consists of an SOI and optional APPn markers.
+ * We recommend use of the JFIF marker, but not the Adobe marker,
+ * when using YCbCr or grayscale data.  The JFIF marker should NOT
+ * be used for any other JPEG colorspace.  The Adobe marker is helpful
+ * to distinguish RGB, CMYK, and YCCK colorspaces.
+ * Note that an application can write additional header markers after
+ * jpeg_start_compress returns.
+ */
+
+METHODDEF(void)
+write_file_header (j_compress_ptr cinfo)
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+
+  emit_marker(cinfo, M_SOI);	/* first the SOI */
+
+  /* SOI is defined to reset restart interval to 0 */
+  marker->last_restart_interval = 0;
+
+  if (cinfo->write_JFIF_header)	/* next an optional JFIF APP0 */
+    emit_jfif_app0(cinfo);
+  if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */
+    emit_adobe_app14(cinfo);
+}
+
+
+/*
+ * Write frame header.
+ * This consists of DQT and SOFn markers, and a conditional pseudo SOS marker.
+ * Note that we do not emit the SOF until we have emitted the DQT(s).
+ * This avoids compatibility problems with incorrect implementations that
+ * try to error-check the quant table numbers as soon as they see the SOF.
+ */
+
+METHODDEF(void)
+write_frame_header (j_compress_ptr cinfo)
+{
+  int ci, prec;
+  boolean is_baseline;
+  jpeg_component_info *compptr;
+  
+  /* Emit DQT for each quantization table.
+   * Note that emit_dqt() suppresses any duplicate tables.
+   */
+  prec = 0;
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    prec += emit_dqt(cinfo, compptr->quant_tbl_no);
+  }
+  /* now prec is nonzero iff there are any 16-bit quant tables. */
+
+  /* Check for a non-baseline specification.
+   * Note we assume that Huffman table numbers won't be changed later.
+   */
+  if (cinfo->arith_code || cinfo->progressive_mode ||
+      cinfo->data_precision != 8 || cinfo->block_size != DCTSIZE) {
+    is_baseline = FALSE;
+  } else {
+    is_baseline = TRUE;
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      if (compptr->dc_tbl_no > 1 || compptr->ac_tbl_no > 1)
+	is_baseline = FALSE;
+    }
+    if (prec && is_baseline) {
+      is_baseline = FALSE;
+      /* If it's baseline except for quantizer size, warn the user */
+      TRACEMS(cinfo, 0, JTRC_16BIT_TABLES);
+    }
+  }
+
+  /* Emit the proper SOF marker */
+  if (cinfo->arith_code) {
+    if (cinfo->progressive_mode)
+      emit_sof(cinfo, M_SOF10); /* SOF code for progressive arithmetic */
+    else
+      emit_sof(cinfo, M_SOF9);  /* SOF code for sequential arithmetic */
+  } else {
+    if (cinfo->progressive_mode)
+      emit_sof(cinfo, M_SOF2);	/* SOF code for progressive Huffman */
+    else if (is_baseline)
+      emit_sof(cinfo, M_SOF0);	/* SOF code for baseline implementation */
+    else
+      emit_sof(cinfo, M_SOF1);	/* SOF code for non-baseline Huffman file */
+  }
+
+  /* Check to emit pseudo SOS marker */
+  if (cinfo->progressive_mode && cinfo->block_size != DCTSIZE)
+    emit_pseudo_sos(cinfo);
+}
+
+
+/*
+ * Write scan header.
+ * This consists of DHT or DAC markers, optional DRI, and SOS.
+ * Compressed data will be written following the SOS.
+ */
+
+METHODDEF(void)
+write_scan_header (j_compress_ptr cinfo)
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+  int i;
+  jpeg_component_info *compptr;
+
+  if (cinfo->arith_code) {
+    /* Emit arith conditioning info.  We may have some duplication
+     * if the file has multiple scans, but it's so small it's hardly
+     * worth worrying about.
+     */
+    emit_dac(cinfo);
+  } else {
+    /* Emit Huffman tables.
+     * Note that emit_dht() suppresses any duplicate tables.
+     */
+    for (i = 0; i < cinfo->comps_in_scan; i++) {
+      compptr = cinfo->cur_comp_info[i];
+      /* DC needs no table for refinement scan */
+      if (cinfo->Ss == 0 && cinfo->Ah == 0)
+	emit_dht(cinfo, compptr->dc_tbl_no, FALSE);
+      /* AC needs no table when not present */
+      if (cinfo->Se)
+	emit_dht(cinfo, compptr->ac_tbl_no, TRUE);
+    }
+  }
+
+  /* Emit DRI if required --- note that DRI value could change for each scan.
+   * We avoid wasting space with unnecessary DRIs, however.
+   */
+  if (cinfo->restart_interval != marker->last_restart_interval) {
+    emit_dri(cinfo);
+    marker->last_restart_interval = cinfo->restart_interval;
+  }
+
+  emit_sos(cinfo);
+}
+
+
+/*
+ * Write datastream trailer.
+ */
+
+METHODDEF(void)
+write_file_trailer (j_compress_ptr cinfo)
+{
+  emit_marker(cinfo, M_EOI);
+}
+
+
+/*
+ * Write an abbreviated table-specification datastream.
+ * This consists of SOI, DQT and DHT tables, and EOI.
+ * Any table that is defined and not marked sent_table = TRUE will be
+ * emitted.  Note that all tables will be marked sent_table = TRUE at exit.
+ */
+
+METHODDEF(void)
+write_tables_only (j_compress_ptr cinfo)
+{
+  int i;
+
+  emit_marker(cinfo, M_SOI);
+
+  for (i = 0; i < NUM_QUANT_TBLS; i++) {
+    if (cinfo->quant_tbl_ptrs[i] != NULL)
+      (void) emit_dqt(cinfo, i);
+  }
+
+  if (! cinfo->arith_code) {
+    for (i = 0; i < NUM_HUFF_TBLS; i++) {
+      if (cinfo->dc_huff_tbl_ptrs[i] != NULL)
+	emit_dht(cinfo, i, FALSE);
+      if (cinfo->ac_huff_tbl_ptrs[i] != NULL)
+	emit_dht(cinfo, i, TRUE);
+    }
+  }
+
+  emit_marker(cinfo, M_EOI);
+}
+
+
+/*
+ * Initialize the marker writer module.
+ */
+
+GLOBAL(void)
+jinit_marker_writer (j_compress_ptr cinfo)
+{
+  my_marker_ptr marker;
+
+  /* Create the subobject */
+  marker = (my_marker_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_marker_writer));
+  cinfo->marker = (struct jpeg_marker_writer *) marker;
+  /* Initialize method pointers */
+  marker->pub.write_file_header = write_file_header;
+  marker->pub.write_frame_header = write_frame_header;
+  marker->pub.write_scan_header = write_scan_header;
+  marker->pub.write_file_trailer = write_file_trailer;
+  marker->pub.write_tables_only = write_tables_only;
+  marker->pub.write_marker_header = write_marker_header;
+  marker->pub.write_marker_byte = write_marker_byte;
+  /* Initialize private state */
+  marker->last_restart_interval = 0;
+}
diff --git a/jpeg-8d/jcmaster.c b/jpeg-8d/jcmaster.c
new file mode 100644
index 0000000..caf80a5
--- /dev/null
+++ b/jpeg-8d/jcmaster.c
@@ -0,0 +1,858 @@
+/*
+ * jcmaster.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2003-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains master control logic for the JPEG compressor.
+ * These routines are concerned with parameter validation, initial setup,
+ * and inter-pass control (determining the number of passes and the work 
+ * to be done in each pass).
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Private state */
+
+typedef enum {
+	main_pass,		/* input data, also do first output step */
+	huff_opt_pass,		/* Huffman code optimization pass */
+	output_pass		/* data output pass */
+} c_pass_type;
+
+typedef struct {
+  struct jpeg_comp_master pub;	/* public fields */
+
+  c_pass_type pass_type;	/* the type of the current pass */
+
+  int pass_number;		/* # of passes completed */
+  int total_passes;		/* total # of passes needed */
+
+  int scan_number;		/* current index in scan_info[] */
+} my_comp_master;
+
+typedef my_comp_master * my_master_ptr;
+
+
+/*
+ * Support routines that do various essential calculations.
+ */
+
+/*
+ * Compute JPEG image dimensions and related values.
+ * NOTE: this is exported for possible use by application.
+ * Hence it mustn't do anything that can't be done twice.
+ */
+
+GLOBAL(void)
+jpeg_calc_jpeg_dimensions (j_compress_ptr cinfo)
+/* Do computations that are needed before master selection phase */
+{
+#ifdef DCT_SCALING_SUPPORTED
+
+  /* Sanity check on input image dimensions to prevent overflow in
+   * following calculation.
+   * We do check jpeg_width and jpeg_height in initial_setup below,
+   * but image_width and image_height can come from arbitrary data,
+   * and we need some space for multiplication by block_size.
+   */
+  if (((long) cinfo->image_width >> 24) || ((long) cinfo->image_height >> 24))
+    ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
+
+  /* Compute actual JPEG image dimensions and DCT scaling choices. */
+  if (cinfo->scale_num >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/1 scaling */
+    cinfo->jpeg_width = cinfo->image_width * cinfo->block_size;
+    cinfo->jpeg_height = cinfo->image_height * cinfo->block_size;
+    cinfo->min_DCT_h_scaled_size = 1;
+    cinfo->min_DCT_v_scaled_size = 1;
+  } else if (cinfo->scale_num * 2 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/2 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 2L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 2L);
+    cinfo->min_DCT_h_scaled_size = 2;
+    cinfo->min_DCT_v_scaled_size = 2;
+  } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/3 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 3L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 3L);
+    cinfo->min_DCT_h_scaled_size = 3;
+    cinfo->min_DCT_v_scaled_size = 3;
+  } else if (cinfo->scale_num * 4 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/4 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 4L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 4L);
+    cinfo->min_DCT_h_scaled_size = 4;
+    cinfo->min_DCT_v_scaled_size = 4;
+  } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/5 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 5L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 5L);
+    cinfo->min_DCT_h_scaled_size = 5;
+    cinfo->min_DCT_v_scaled_size = 5;
+  } else if (cinfo->scale_num * 6 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/6 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 6L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 6L);
+    cinfo->min_DCT_h_scaled_size = 6;
+    cinfo->min_DCT_v_scaled_size = 6;
+  } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/7 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 7L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 7L);
+    cinfo->min_DCT_h_scaled_size = 7;
+    cinfo->min_DCT_v_scaled_size = 7;
+  } else if (cinfo->scale_num * 8 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/8 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 8L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 8L);
+    cinfo->min_DCT_h_scaled_size = 8;
+    cinfo->min_DCT_v_scaled_size = 8;
+  } else if (cinfo->scale_num * 9 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/9 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 9L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 9L);
+    cinfo->min_DCT_h_scaled_size = 9;
+    cinfo->min_DCT_v_scaled_size = 9;
+  } else if (cinfo->scale_num * 10 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/10 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 10L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 10L);
+    cinfo->min_DCT_h_scaled_size = 10;
+    cinfo->min_DCT_v_scaled_size = 10;
+  } else if (cinfo->scale_num * 11 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/11 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 11L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 11L);
+    cinfo->min_DCT_h_scaled_size = 11;
+    cinfo->min_DCT_v_scaled_size = 11;
+  } else if (cinfo->scale_num * 12 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/12 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 12L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 12L);
+    cinfo->min_DCT_h_scaled_size = 12;
+    cinfo->min_DCT_v_scaled_size = 12;
+  } else if (cinfo->scale_num * 13 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/13 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 13L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 13L);
+    cinfo->min_DCT_h_scaled_size = 13;
+    cinfo->min_DCT_v_scaled_size = 13;
+  } else if (cinfo->scale_num * 14 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/14 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 14L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 14L);
+    cinfo->min_DCT_h_scaled_size = 14;
+    cinfo->min_DCT_v_scaled_size = 14;
+  } else if (cinfo->scale_num * 15 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/15 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 15L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 15L);
+    cinfo->min_DCT_h_scaled_size = 15;
+    cinfo->min_DCT_v_scaled_size = 15;
+  } else {
+    /* Provide block_size/16 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 16L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 16L);
+    cinfo->min_DCT_h_scaled_size = 16;
+    cinfo->min_DCT_v_scaled_size = 16;
+  }
+
+#else /* !DCT_SCALING_SUPPORTED */
+
+  /* Hardwire it to "no scaling" */
+  cinfo->jpeg_width = cinfo->image_width;
+  cinfo->jpeg_height = cinfo->image_height;
+  cinfo->min_DCT_h_scaled_size = DCTSIZE;
+  cinfo->min_DCT_v_scaled_size = DCTSIZE;
+
+#endif /* DCT_SCALING_SUPPORTED */
+}
+
+
+LOCAL(void)
+jpeg_calc_trans_dimensions (j_compress_ptr cinfo)
+{
+  if (cinfo->min_DCT_h_scaled_size != cinfo->min_DCT_v_scaled_size)
+    ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
+	     cinfo->min_DCT_h_scaled_size, cinfo->min_DCT_v_scaled_size);
+
+  cinfo->block_size = cinfo->min_DCT_h_scaled_size;
+}
+
+
+LOCAL(void)
+initial_setup (j_compress_ptr cinfo, boolean transcode_only)
+/* Do computations that are needed before master selection phase */
+{
+  int ci, ssize;
+  jpeg_component_info *compptr;
+  long samplesperrow;
+  JDIMENSION jd_samplesperrow;
+
+  if (transcode_only)
+    jpeg_calc_trans_dimensions(cinfo);
+  else
+    jpeg_calc_jpeg_dimensions(cinfo);
+
+  /* Sanity check on block_size */
+  if (cinfo->block_size < 1 || cinfo->block_size > 16)
+    ERREXIT2(cinfo, JERR_BAD_DCTSIZE, cinfo->block_size, cinfo->block_size);
+
+  /* Derive natural_order from block_size */
+  switch (cinfo->block_size) {
+  case 2: cinfo->natural_order = jpeg_natural_order2; break;
+  case 3: cinfo->natural_order = jpeg_natural_order3; break;
+  case 4: cinfo->natural_order = jpeg_natural_order4; break;
+  case 5: cinfo->natural_order = jpeg_natural_order5; break;
+  case 6: cinfo->natural_order = jpeg_natural_order6; break;
+  case 7: cinfo->natural_order = jpeg_natural_order7; break;
+  default: cinfo->natural_order = jpeg_natural_order; break;
+  }
+
+  /* Derive lim_Se from block_size */
+  cinfo->lim_Se = cinfo->block_size < DCTSIZE ?
+    cinfo->block_size * cinfo->block_size - 1 : DCTSIZE2-1;
+
+  /* Sanity check on image dimensions */
+  if (cinfo->jpeg_height <= 0 || cinfo->jpeg_width <= 0 ||
+      cinfo->num_components <= 0 || cinfo->input_components <= 0)
+    ERREXIT(cinfo, JERR_EMPTY_IMAGE);
+
+  /* Make sure image isn't bigger than I can handle */
+  if ((long) cinfo->jpeg_height > (long) JPEG_MAX_DIMENSION ||
+      (long) cinfo->jpeg_width > (long) JPEG_MAX_DIMENSION)
+    ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
+
+  /* Width of an input scanline must be representable as JDIMENSION. */
+  samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components;
+  jd_samplesperrow = (JDIMENSION) samplesperrow;
+  if ((long) jd_samplesperrow != samplesperrow)
+    ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
+
+  /* For now, precision must match compiled-in value... */
+  if (cinfo->data_precision != BITS_IN_JSAMPLE)
+    ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
+
+  /* Check that number of components won't exceed internal array sizes */
+  if (cinfo->num_components > MAX_COMPONENTS)
+    ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+	     MAX_COMPONENTS);
+
+  /* Compute maximum sampling factors; check factor validity */
+  cinfo->max_h_samp_factor = 1;
+  cinfo->max_v_samp_factor = 1;
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR ||
+	compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR)
+      ERREXIT(cinfo, JERR_BAD_SAMPLING);
+    cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor,
+				   compptr->h_samp_factor);
+    cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor,
+				   compptr->v_samp_factor);
+  }
+
+  /* Compute dimensions of components */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Fill in the correct component_index value; don't rely on application */
+    compptr->component_index = ci;
+    /* In selecting the actual DCT scaling for each component, we try to
+     * scale down the chroma components via DCT scaling rather than downsampling.
+     * This saves time if the downsampler gets to use 1:1 scaling.
+     * Note this code adapts subsampling ratios which are powers of 2.
+     */
+    ssize = 1;
+#ifdef DCT_SCALING_SUPPORTED
+    while (cinfo->min_DCT_h_scaled_size * ssize <=
+	   (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) &&
+	   (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) {
+      ssize = ssize * 2;
+    }
+#endif
+    compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize;
+    ssize = 1;
+#ifdef DCT_SCALING_SUPPORTED
+    while (cinfo->min_DCT_v_scaled_size * ssize <=
+	   (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) &&
+	   (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) {
+      ssize = ssize * 2;
+    }
+#endif
+    compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize;
+
+    /* We don't support DCT ratios larger than 2. */
+    if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2)
+	compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2;
+    else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2)
+	compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2;
+
+    /* Size in DCT blocks */
+    compptr->width_in_blocks = (JDIMENSION)
+      jdiv_round_up((long) cinfo->jpeg_width * (long) compptr->h_samp_factor,
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
+    compptr->height_in_blocks = (JDIMENSION)
+      jdiv_round_up((long) cinfo->jpeg_height * (long) compptr->v_samp_factor,
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+    /* Size in samples */
+    compptr->downsampled_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->jpeg_width *
+		    (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size),
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
+    compptr->downsampled_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->jpeg_height *
+		    (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size),
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+    /* Mark component needed (this flag isn't actually used for compression) */
+    compptr->component_needed = TRUE;
+  }
+
+  /* Compute number of fully interleaved MCU rows (number of times that
+   * main controller will call coefficient controller).
+   */
+  cinfo->total_iMCU_rows = (JDIMENSION)
+    jdiv_round_up((long) cinfo->jpeg_height,
+		  (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+}
+
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+
+LOCAL(void)
+validate_script (j_compress_ptr cinfo)
+/* Verify that the scan script in cinfo->scan_info[] is valid; also
+ * determine whether it uses progressive JPEG, and set cinfo->progressive_mode.
+ */
+{
+  const jpeg_scan_info * scanptr;
+  int scanno, ncomps, ci, coefi, thisi;
+  int Ss, Se, Ah, Al;
+  boolean component_sent[MAX_COMPONENTS];
+#ifdef C_PROGRESSIVE_SUPPORTED
+  int * last_bitpos_ptr;
+  int last_bitpos[MAX_COMPONENTS][DCTSIZE2];
+  /* -1 until that coefficient has been seen; then last Al for it */
+#endif
+
+  if (cinfo->num_scans <= 0)
+    ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0);
+
+  /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1;
+   * for progressive JPEG, no scan can have this.
+   */
+  scanptr = cinfo->scan_info;
+  if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) {
+#ifdef C_PROGRESSIVE_SUPPORTED
+    cinfo->progressive_mode = TRUE;
+    last_bitpos_ptr = & last_bitpos[0][0];
+    for (ci = 0; ci < cinfo->num_components; ci++) 
+      for (coefi = 0; coefi < DCTSIZE2; coefi++)
+	*last_bitpos_ptr++ = -1;
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+  } else {
+    cinfo->progressive_mode = FALSE;
+    for (ci = 0; ci < cinfo->num_components; ci++) 
+      component_sent[ci] = FALSE;
+  }
+
+  for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) {
+    /* Validate component indexes */
+    ncomps = scanptr->comps_in_scan;
+    if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN)
+      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN);
+    for (ci = 0; ci < ncomps; ci++) {
+      thisi = scanptr->component_index[ci];
+      if (thisi < 0 || thisi >= cinfo->num_components)
+	ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
+      /* Components must appear in SOF order within each scan */
+      if (ci > 0 && thisi <= scanptr->component_index[ci-1])
+	ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
+    }
+    /* Validate progression parameters */
+    Ss = scanptr->Ss;
+    Se = scanptr->Se;
+    Ah = scanptr->Ah;
+    Al = scanptr->Al;
+    if (cinfo->progressive_mode) {
+#ifdef C_PROGRESSIVE_SUPPORTED
+      /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that
+       * seems wrong: the upper bound ought to depend on data precision.
+       * Perhaps they really meant 0..N+1 for N-bit precision.
+       * Here we allow 0..10 for 8-bit data; Al larger than 10 results in
+       * out-of-range reconstructed DC values during the first DC scan,
+       * which might cause problems for some decoders.
+       */
+#if BITS_IN_JSAMPLE == 8
+#define MAX_AH_AL 10
+#else
+#define MAX_AH_AL 13
+#endif
+      if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 ||
+	  Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL)
+	ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+      if (Ss == 0) {
+	if (Se != 0)		/* DC and AC together not OK */
+	  ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+      } else {
+	if (ncomps != 1)	/* AC scans must be for only one component */
+	  ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+      }
+      for (ci = 0; ci < ncomps; ci++) {
+	last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0];
+	if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */
+	  ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+	for (coefi = Ss; coefi <= Se; coefi++) {
+	  if (last_bitpos_ptr[coefi] < 0) {
+	    /* first scan of this coefficient */
+	    if (Ah != 0)
+	      ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+	  } else {
+	    /* not first scan */
+	    if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1)
+	      ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+	  }
+	  last_bitpos_ptr[coefi] = Al;
+	}
+      }
+#endif
+    } else {
+      /* For sequential JPEG, all progression parameters must be these: */
+      if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0)
+	ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
+      /* Make sure components are not sent twice */
+      for (ci = 0; ci < ncomps; ci++) {
+	thisi = scanptr->component_index[ci];
+	if (component_sent[thisi])
+	  ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
+	component_sent[thisi] = TRUE;
+      }
+    }
+  }
+
+  /* Now verify that everything got sent. */
+  if (cinfo->progressive_mode) {
+#ifdef C_PROGRESSIVE_SUPPORTED
+    /* For progressive mode, we only check that at least some DC data
+     * got sent for each component; the spec does not require that all bits
+     * of all coefficients be transmitted.  Would it be wiser to enforce
+     * transmission of all coefficient bits??
+     */
+    for (ci = 0; ci < cinfo->num_components; ci++) {
+      if (last_bitpos[ci][0] < 0)
+	ERREXIT(cinfo, JERR_MISSING_DATA);
+    }
+#endif
+  } else {
+    for (ci = 0; ci < cinfo->num_components; ci++) {
+      if (! component_sent[ci])
+	ERREXIT(cinfo, JERR_MISSING_DATA);
+    }
+  }
+}
+
+
+LOCAL(void)
+reduce_script (j_compress_ptr cinfo)
+/* Adapt scan script for use with reduced block size;
+ * assume that script has been validated before.
+ */
+{
+  jpeg_scan_info * scanptr;
+  int idxout, idxin;
+
+  /* Circumvent const declaration for this function */
+  scanptr = (jpeg_scan_info *) cinfo->scan_info;
+  idxout = 0;
+
+  for (idxin = 0; idxin < cinfo->num_scans; idxin++) {
+    /* After skipping, idxout becomes smaller than idxin */
+    if (idxin != idxout)
+      /* Copy rest of data;
+       * note we stay in given chunk of allocated memory.
+       */
+      scanptr[idxout] = scanptr[idxin];
+    if (scanptr[idxout].Ss > cinfo->lim_Se)
+      /* Entire scan out of range - skip this entry */
+      continue;
+    if (scanptr[idxout].Se > cinfo->lim_Se)
+      /* Limit scan to end of block */
+      scanptr[idxout].Se = cinfo->lim_Se;
+    idxout++;
+  }
+
+  cinfo->num_scans = idxout;
+}
+
+#endif /* C_MULTISCAN_FILES_SUPPORTED */
+
+
+LOCAL(void)
+select_scan_parameters (j_compress_ptr cinfo)
+/* Set up the scan parameters for the current scan */
+{
+  int ci;
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+  if (cinfo->scan_info != NULL) {
+    /* Prepare for current scan --- the script is already validated */
+    my_master_ptr master = (my_master_ptr) cinfo->master;
+    const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number;
+
+    cinfo->comps_in_scan = scanptr->comps_in_scan;
+    for (ci = 0; ci < scanptr->comps_in_scan; ci++) {
+      cinfo->cur_comp_info[ci] =
+	&cinfo->comp_info[scanptr->component_index[ci]];
+    }
+    if (cinfo->progressive_mode) {
+      cinfo->Ss = scanptr->Ss;
+      cinfo->Se = scanptr->Se;
+      cinfo->Ah = scanptr->Ah;
+      cinfo->Al = scanptr->Al;
+      return;
+    }
+  }
+  else
+#endif
+  {
+    /* Prepare for single sequential-JPEG scan containing all components */
+    if (cinfo->num_components > MAX_COMPS_IN_SCAN)
+      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+	       MAX_COMPS_IN_SCAN);
+    cinfo->comps_in_scan = cinfo->num_components;
+    for (ci = 0; ci < cinfo->num_components; ci++) {
+      cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci];
+    }
+  }
+  cinfo->Ss = 0;
+  cinfo->Se = cinfo->block_size * cinfo->block_size - 1;
+  cinfo->Ah = 0;
+  cinfo->Al = 0;
+}
+
+
+LOCAL(void)
+per_scan_setup (j_compress_ptr cinfo)
+/* Do computations that are needed before processing a JPEG scan */
+/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */
+{
+  int ci, mcublks, tmp;
+  jpeg_component_info *compptr;
+  
+  if (cinfo->comps_in_scan == 1) {
+    
+    /* Noninterleaved (single-component) scan */
+    compptr = cinfo->cur_comp_info[0];
+    
+    /* Overall image size in MCUs */
+    cinfo->MCUs_per_row = compptr->width_in_blocks;
+    cinfo->MCU_rows_in_scan = compptr->height_in_blocks;
+    
+    /* For noninterleaved scan, always one block per MCU */
+    compptr->MCU_width = 1;
+    compptr->MCU_height = 1;
+    compptr->MCU_blocks = 1;
+    compptr->MCU_sample_width = compptr->DCT_h_scaled_size;
+    compptr->last_col_width = 1;
+    /* For noninterleaved scans, it is convenient to define last_row_height
+     * as the number of block rows present in the last iMCU row.
+     */
+    tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
+    if (tmp == 0) tmp = compptr->v_samp_factor;
+    compptr->last_row_height = tmp;
+    
+    /* Prepare array describing MCU composition */
+    cinfo->blocks_in_MCU = 1;
+    cinfo->MCU_membership[0] = 0;
+    
+  } else {
+    
+    /* Interleaved (multi-component) scan */
+    if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN)
+      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan,
+	       MAX_COMPS_IN_SCAN);
+    
+    /* Overall image size in MCUs */
+    cinfo->MCUs_per_row = (JDIMENSION)
+      jdiv_round_up((long) cinfo->jpeg_width,
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
+    cinfo->MCU_rows_in_scan = (JDIMENSION)
+      jdiv_round_up((long) cinfo->jpeg_height,
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+    
+    cinfo->blocks_in_MCU = 0;
+    
+    for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+      compptr = cinfo->cur_comp_info[ci];
+      /* Sampling factors give # of blocks of component in each MCU */
+      compptr->MCU_width = compptr->h_samp_factor;
+      compptr->MCU_height = compptr->v_samp_factor;
+      compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
+      compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size;
+      /* Figure number of non-dummy blocks in last MCU column & row */
+      tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
+      if (tmp == 0) tmp = compptr->MCU_width;
+      compptr->last_col_width = tmp;
+      tmp = (int) (compptr->height_in_blocks % compptr->MCU_height);
+      if (tmp == 0) tmp = compptr->MCU_height;
+      compptr->last_row_height = tmp;
+      /* Prepare array describing MCU composition */
+      mcublks = compptr->MCU_blocks;
+      if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU)
+	ERREXIT(cinfo, JERR_BAD_MCU_SIZE);
+      while (mcublks-- > 0) {
+	cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci;
+      }
+    }
+    
+  }
+
+  /* Convert restart specified in rows to actual MCU count. */
+  /* Note that count must fit in 16 bits, so we provide limiting. */
+  if (cinfo->restart_in_rows > 0) {
+    long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row;
+    cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L);
+  }
+}
+
+
+/*
+ * Per-pass setup.
+ * This is called at the beginning of each pass.  We determine which modules
+ * will be active during this pass and give them appropriate start_pass calls.
+ * We also set is_last_pass to indicate whether any more passes will be
+ * required.
+ */
+
+METHODDEF(void)
+prepare_for_pass (j_compress_ptr cinfo)
+{
+  my_master_ptr master = (my_master_ptr) cinfo->master;
+
+  switch (master->pass_type) {
+  case main_pass:
+    /* Initial pass: will collect input data, and do either Huffman
+     * optimization or data output for the first scan.
+     */
+    select_scan_parameters(cinfo);
+    per_scan_setup(cinfo);
+    if (! cinfo->raw_data_in) {
+      (*cinfo->cconvert->start_pass) (cinfo);
+      (*cinfo->downsample->start_pass) (cinfo);
+      (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU);
+    }
+    (*cinfo->fdct->start_pass) (cinfo);
+    (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding);
+    (*cinfo->coef->start_pass) (cinfo,
+				(master->total_passes > 1 ?
+				 JBUF_SAVE_AND_PASS : JBUF_PASS_THRU));
+    (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU);
+    if (cinfo->optimize_coding) {
+      /* No immediate data output; postpone writing frame/scan headers */
+      master->pub.call_pass_startup = FALSE;
+    } else {
+      /* Will write frame/scan headers at first jpeg_write_scanlines call */
+      master->pub.call_pass_startup = TRUE;
+    }
+    break;
+#ifdef ENTROPY_OPT_SUPPORTED
+  case huff_opt_pass:
+    /* Do Huffman optimization for a scan after the first one. */
+    select_scan_parameters(cinfo);
+    per_scan_setup(cinfo);
+    if (cinfo->Ss != 0 || cinfo->Ah == 0) {
+      (*cinfo->entropy->start_pass) (cinfo, TRUE);
+      (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
+      master->pub.call_pass_startup = FALSE;
+      break;
+    }
+    /* Special case: Huffman DC refinement scans need no Huffman table
+     * and therefore we can skip the optimization pass for them.
+     */
+    master->pass_type = output_pass;
+    master->pass_number++;
+    /*FALLTHROUGH*/
+#endif
+  case output_pass:
+    /* Do a data-output pass. */
+    /* We need not repeat per-scan setup if prior optimization pass did it. */
+    if (! cinfo->optimize_coding) {
+      select_scan_parameters(cinfo);
+      per_scan_setup(cinfo);
+    }
+    (*cinfo->entropy->start_pass) (cinfo, FALSE);
+    (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
+    /* We emit frame/scan headers now */
+    if (master->scan_number == 0)
+      (*cinfo->marker->write_frame_header) (cinfo);
+    (*cinfo->marker->write_scan_header) (cinfo);
+    master->pub.call_pass_startup = FALSE;
+    break;
+  default:
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+  }
+
+  master->pub.is_last_pass = (master->pass_number == master->total_passes-1);
+
+  /* Set up progress monitor's pass info if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->completed_passes = master->pass_number;
+    cinfo->progress->total_passes = master->total_passes;
+  }
+}
+
+
+/*
+ * Special start-of-pass hook.
+ * This is called by jpeg_write_scanlines if call_pass_startup is TRUE.
+ * In single-pass processing, we need this hook because we don't want to
+ * write frame/scan headers during jpeg_start_compress; we want to let the
+ * application write COM markers etc. between jpeg_start_compress and the
+ * jpeg_write_scanlines loop.
+ * In multi-pass processing, this routine is not used.
+ */
+
+METHODDEF(void)
+pass_startup (j_compress_ptr cinfo)
+{
+  cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */
+
+  (*cinfo->marker->write_frame_header) (cinfo);
+  (*cinfo->marker->write_scan_header) (cinfo);
+}
+
+
+/*
+ * Finish up at end of pass.
+ */
+
+METHODDEF(void)
+finish_pass_master (j_compress_ptr cinfo)
+{
+  my_master_ptr master = (my_master_ptr) cinfo->master;
+
+  /* The entropy coder always needs an end-of-pass call,
+   * either to analyze statistics or to flush its output buffer.
+   */
+  (*cinfo->entropy->finish_pass) (cinfo);
+
+  /* Update state for next pass */
+  switch (master->pass_type) {
+  case main_pass:
+    /* next pass is either output of scan 0 (after optimization)
+     * or output of scan 1 (if no optimization).
+     */
+    master->pass_type = output_pass;
+    if (! cinfo->optimize_coding)
+      master->scan_number++;
+    break;
+  case huff_opt_pass:
+    /* next pass is always output of current scan */
+    master->pass_type = output_pass;
+    break;
+  case output_pass:
+    /* next pass is either optimization or output of next scan */
+    if (cinfo->optimize_coding)
+      master->pass_type = huff_opt_pass;
+    master->scan_number++;
+    break;
+  }
+
+  master->pass_number++;
+}
+
+
+/*
+ * Initialize master compression control.
+ */
+
+GLOBAL(void)
+jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
+{
+  my_master_ptr master;
+
+  master = (my_master_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(my_comp_master));
+  cinfo->master = (struct jpeg_comp_master *) master;
+  master->pub.prepare_for_pass = prepare_for_pass;
+  master->pub.pass_startup = pass_startup;
+  master->pub.finish_pass = finish_pass_master;
+  master->pub.is_last_pass = FALSE;
+
+  /* Validate parameters, determine derived values */
+  initial_setup(cinfo, transcode_only);
+
+  if (cinfo->scan_info != NULL) {
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+    validate_script(cinfo);
+    if (cinfo->block_size < DCTSIZE)
+      reduce_script(cinfo);
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+  } else {
+    cinfo->progressive_mode = FALSE;
+    cinfo->num_scans = 1;
+  }
+
+  if ((cinfo->progressive_mode || cinfo->block_size < DCTSIZE) &&
+      !cinfo->arith_code)			/*  TEMPORARY HACK ??? */
+    /* assume default tables no good for progressive or downscale mode */
+    cinfo->optimize_coding = TRUE;
+
+  /* Initialize my private state */
+  if (transcode_only) {
+    /* no main pass in transcoding */
+    if (cinfo->optimize_coding)
+      master->pass_type = huff_opt_pass;
+    else
+      master->pass_type = output_pass;
+  } else {
+    /* for normal compression, first pass is always this type: */
+    master->pass_type = main_pass;
+  }
+  master->scan_number = 0;
+  master->pass_number = 0;
+  if (cinfo->optimize_coding)
+    master->total_passes = cinfo->num_scans * 2;
+  else
+    master->total_passes = cinfo->num_scans;
+}
diff --git a/jpeg-8d/jcomapi.c b/jpeg-8d/jcomapi.c
new file mode 100644
index 0000000..9b1fa75
--- /dev/null
+++ b/jpeg-8d/jcomapi.c
@@ -0,0 +1,106 @@
+/*
+ * jcomapi.c
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains application interface routines that are used for both
+ * compression and decompression.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * Abort processing of a JPEG compression or decompression operation,
+ * but don't destroy the object itself.
+ *
+ * For this, we merely clean up all the nonpermanent memory pools.
+ * Note that temp files (virtual arrays) are not allowed to belong to
+ * the permanent pool, so we will be able to close all temp files here.
+ * Closing a data source or destination, if necessary, is the application's
+ * responsibility.
+ */
+
+GLOBAL(void)
+jpeg_abort (j_common_ptr cinfo)
+{
+  int pool;
+
+  /* Do nothing if called on a not-initialized or destroyed JPEG object. */
+  if (cinfo->mem == NULL)
+    return;
+
+  /* Releasing pools in reverse order might help avoid fragmentation
+   * with some (brain-damaged) malloc libraries.
+   */
+  for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) {
+    (*cinfo->mem->free_pool) (cinfo, pool);
+  }
+
+  /* Reset overall state for possible reuse of object */
+  if (cinfo->is_decompressor) {
+    cinfo->global_state = DSTATE_START;
+    /* Try to keep application from accessing now-deleted marker list.
+     * A bit kludgy to do it here, but this is the most central place.
+     */
+    ((j_decompress_ptr) cinfo)->marker_list = NULL;
+  } else {
+    cinfo->global_state = CSTATE_START;
+  }
+}
+
+
+/*
+ * Destruction of a JPEG object.
+ *
+ * Everything gets deallocated except the master jpeg_compress_struct itself
+ * and the error manager struct.  Both of these are supplied by the application
+ * and must be freed, if necessary, by the application.  (Often they are on
+ * the stack and so don't need to be freed anyway.)
+ * Closing a data source or destination, if necessary, is the application's
+ * responsibility.
+ */
+
+GLOBAL(void)
+jpeg_destroy (j_common_ptr cinfo)
+{
+  /* We need only tell the memory manager to release everything. */
+  /* NB: mem pointer is NULL if memory mgr failed to initialize. */
+  if (cinfo->mem != NULL)
+    (*cinfo->mem->self_destruct) (cinfo);
+  cinfo->mem = NULL;		/* be safe if jpeg_destroy is called twice */
+  cinfo->global_state = 0;	/* mark it destroyed */
+}
+
+
+/*
+ * Convenience routines for allocating quantization and Huffman tables.
+ * (Would jutils.c be a more reasonable place to put these?)
+ */
+
+GLOBAL(JQUANT_TBL *)
+jpeg_alloc_quant_table (j_common_ptr cinfo)
+{
+  JQUANT_TBL *tbl;
+
+  tbl = (JQUANT_TBL *)
+    (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL));
+  tbl->sent_table = FALSE;	/* make sure this is false in any new table */
+  return tbl;
+}
+
+
+GLOBAL(JHUFF_TBL *)
+jpeg_alloc_huff_table (j_common_ptr cinfo)
+{
+  JHUFF_TBL *tbl;
+
+  tbl = (JHUFF_TBL *)
+    (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL));
+  tbl->sent_table = FALSE;	/* make sure this is false in any new table */
+  return tbl;
+}
diff --git a/jpeg-8d/jconfig.bcc b/jpeg-8d/jconfig.bcc
new file mode 100644
index 0000000..e4da3d7
--- /dev/null
+++ b/jpeg-8d/jconfig.bcc
@@ -0,0 +1,48 @@
+/* jconfig.bcc --- jconfig.h for Borland C (Turbo C) on MS-DOS or OS/2. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#ifdef __MSDOS__
+#define NEED_FAR_POINTERS	/* for small or medium memory model */
+#endif
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN	/* this assumes you have -w-stu in CFLAGS */
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#ifdef __MSDOS__
+#define USE_MSDOS_MEMMGR	/* Define this if you use jmemdos.c */
+#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
+#define USE_FMEM		/* Borland has _fmemcpy() and _fmemset() */
+#endif
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE
+#define USE_SETMODE		/* Borland has setmode() */
+#ifdef __MSDOS__
+#define NEED_SIGNAL_CATCHER	/* Define this if you use jmemdos.c */
+#endif
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jpeg-8d/jconfig.cfg b/jpeg-8d/jconfig.cfg
new file mode 100644
index 0000000..bb7435c
--- /dev/null
+++ b/jpeg-8d/jconfig.cfg
@@ -0,0 +1,53 @@
+/* jconfig.cfg --- source file edited by configure script */
+/* see jconfig.txt for explanations */
+
+#undef HAVE_PROTOTYPES
+#undef HAVE_UNSIGNED_CHAR
+#undef HAVE_UNSIGNED_SHORT
+#undef void
+#undef const
+#undef CHAR_IS_UNSIGNED
+#undef HAVE_STDDEF_H
+#undef HAVE_STDLIB_H
+#undef HAVE_LOCALE_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+/* Define this if you get warnings about undefined structures. */
+#undef INCOMPLETE_TYPES_BROKEN
+
+/* Define "boolean" as unsigned char, not int, on Windows systems. */
+#ifdef _WIN32
+#ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
+typedef unsigned char boolean;
+#endif
+#define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
+#endif
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+#undef INLINE
+/* These are for configuring the JPEG memory manager. */
+#undef DEFAULT_MAX_MEM
+#undef NO_MKTEMP
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#undef TWO_FILE_COMMANDLINE
+#undef NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+
+/* Define this if you want percent-done progress reports from cjpeg/djpeg. */
+#undef PROGRESS_REPORT
+
+#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jpeg-8d/jconfig.dj b/jpeg-8d/jconfig.dj
new file mode 100644
index 0000000..a0d4092
--- /dev/null
+++ b/jpeg-8d/jconfig.dj
@@ -0,0 +1,38 @@
+/* jconfig.dj --- jconfig.h for DJGPP (Delorie's GNU C port) on MS-DOS. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS	/* DJGPP uses flat 32-bit addressing */
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#undef TWO_FILE_COMMANDLINE	/* optional */
+#define USE_SETMODE		/* Needed to make one-file style work in DJGPP */
+#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jpeg-8d/jconfig.mac b/jpeg-8d/jconfig.mac
new file mode 100644
index 0000000..70ed66c
--- /dev/null
+++ b/jpeg-8d/jconfig.mac
@@ -0,0 +1,43 @@
+/* jconfig.mac --- jconfig.h for CodeWarrior on Apple Macintosh */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#define USE_MAC_MEMMGR		/* Define this if you use jmemmac.c */
+
+#define ALIGN_TYPE long		/* Needed for 680x0 Macs */
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define USE_CCOMMAND		/* Command line reader for Macintosh */
+#define TWO_FILE_COMMANDLINE	/* Binary I/O thru stdin/stdout doesn't work */
+
+#undef NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jpeg-8d/jconfig.manx b/jpeg-8d/jconfig.manx
new file mode 100644
index 0000000..cd529d7
--- /dev/null
+++ b/jpeg-8d/jconfig.manx
@@ -0,0 +1,43 @@
+/* jconfig.manx --- jconfig.h for Amiga systems using Manx Aztec C ver 5.x. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#define TEMP_DIRECTORY "JPEGTMP:"	/* recommended setting for Amiga */
+
+#define SHORTxSHORT_32		/* produces better DCT code with Aztec C */
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE
+#define NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#define signal_catcher _abort	/* hack for Aztec C naming requirements */
+
+#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jpeg-8d/jconfig.mc6 b/jpeg-8d/jconfig.mc6
new file mode 100644
index 0000000..6b05e81
--- /dev/null
+++ b/jpeg-8d/jconfig.mc6
@@ -0,0 +1,52 @@
+/* jconfig.mc6 --- jconfig.h for Microsoft C on MS-DOS, version 6.00A & up. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#define NEED_FAR_POINTERS	/* for small or medium memory model */
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#define USE_MSDOS_MEMMGR	/* Define this if you use jmemdos.c */
+
+#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
+
+#define USE_FMEM		/* Microsoft has _fmemcpy() and _fmemset() */
+
+#define NEED_FHEAPMIN		/* far heap management routines are broken */
+
+#define SHORTxLCONST_32		/* enable compiler-specific DCT optimization */
+/* Note: the above define is known to improve the code with Microsoft C 6.00A.
+ * I do not know whether it is good for later compiler versions.
+ * Please report any info on this point to jpeg-info@jpegclub.org.
+ */
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE
+#define USE_SETMODE		/* Microsoft has setmode() */
+#define NEED_SIGNAL_CATCHER	/* Define this if you use jmemdos.c */
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jpeg-8d/jconfig.sas b/jpeg-8d/jconfig.sas
new file mode 100644
index 0000000..b8a1819
--- /dev/null
+++ b/jpeg-8d/jconfig.sas
@@ -0,0 +1,43 @@
+/* jconfig.sas --- jconfig.h for Amiga systems using SAS C 6.0 and up. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#define TEMP_DIRECTORY "JPEGTMP:"	/* recommended setting for Amiga */
+
+#define NO_MKTEMP		/* SAS C doesn't have mktemp() */
+
+#define SHORTxSHORT_32		/* produces better DCT code with SAS C */
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE
+#define NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jpeg-8d/jconfig.st b/jpeg-8d/jconfig.st
new file mode 100644
index 0000000..5afa0b6
--- /dev/null
+++ b/jpeg-8d/jconfig.st
@@ -0,0 +1,42 @@
+/* jconfig.st --- jconfig.h for Atari ST/STE/TT using Pure C or Turbo C. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+#define INCOMPLETE_TYPES_BROKEN	/* suppress undefined-structure warnings */
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#define ALIGN_TYPE  long	/* apparently double is a weird size? */
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE	/* optional -- undef if you like Unix style */
+/* Note: if you undef TWO_FILE_COMMANDLINE, you may need to define
+ * USE_SETMODE.  Some Atari compilers require it, some do not.
+ */
+#define NEED_SIGNAL_CATCHER	/* needed if you use jmemname.c */
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jpeg-8d/jconfig.txt b/jpeg-8d/jconfig.txt
new file mode 100644
index 0000000..b96d312
--- /dev/null
+++ b/jpeg-8d/jconfig.txt
@@ -0,0 +1,164 @@
+/*
+ * jconfig.txt
+ *
+ * Copyright (C) 1991-1994, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file documents the configuration options that are required to
+ * customize the JPEG software for a particular system.
+ *
+ * The actual configuration options for a particular installation are stored
+ * in jconfig.h.  On many machines, jconfig.h can be generated automatically
+ * or copied from one of the "canned" jconfig files that we supply.  But if
+ * you need to generate a jconfig.h file by hand, this file tells you how.
+ *
+ * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING.
+ * EDIT A COPY NAMED JCONFIG.H.
+ */
+
+
+/*
+ * These symbols indicate the properties of your machine or compiler.
+ * #define the symbol if yes, #undef it if no.
+ */
+
+/* Does your compiler support function prototypes?
+ * (If not, you also need to use ansi2knr, see install.txt)
+ */
+#define HAVE_PROTOTYPES
+
+/* Does your compiler support the declaration "unsigned char" ?
+ * How about "unsigned short" ?
+ */
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+
+/* Define "void" as "char" if your compiler doesn't know about type void.
+ * NOTE: be sure to define void such that "void *" represents the most general
+ * pointer type, e.g., that returned by malloc().
+ */
+/* #define void char */
+
+/* Define "const" as empty if your compiler doesn't know the "const" keyword.
+ */
+/* #define const */
+
+/* Define this if an ordinary "char" type is unsigned.
+ * If you're not sure, leaving it undefined will work at some cost in speed.
+ * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal.
+ */
+#undef CHAR_IS_UNSIGNED
+
+/* Define this if your system has an ANSI-conforming <stddef.h> file.
+ */
+#define HAVE_STDDEF_H
+
+/* Define this if your system has an ANSI-conforming <stdlib.h> file.
+ */
+#define HAVE_STDLIB_H
+
+/* Define this if your system does not have an ANSI/SysV <string.h>,
+ * but does have a BSD-style <strings.h>.
+ */
+#undef NEED_BSD_STRINGS
+
+/* Define this if your system does not provide typedef size_t in any of the
+ * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in
+ * <sys/types.h> instead.
+ */
+#undef NEED_SYS_TYPES_H
+
+/* For 80x86 machines, you need to define NEED_FAR_POINTERS,
+ * unless you are using a large-data memory model or 80386 flat-memory mode.
+ * On less brain-damaged CPUs this symbol must not be defined.
+ * (Defining this symbol causes large data structures to be referenced through
+ * "far" pointers and to be allocated with a special version of malloc.)
+ */
+#undef NEED_FAR_POINTERS
+
+/* Define this if your linker needs global names to be unique in less
+ * than the first 15 characters.
+ */
+#undef NEED_SHORT_EXTERNAL_NAMES
+
+/* Although a real ANSI C compiler can deal perfectly well with pointers to
+ * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI
+ * and pseudo-ANSI compilers get confused.  To keep one of these bozos happy,
+ * define INCOMPLETE_TYPES_BROKEN.  This is not recommended unless you
+ * actually get "missing structure definition" warnings or errors while
+ * compiling the JPEG code.
+ */
+#undef INCOMPLETE_TYPES_BROKEN
+
+/* Define "boolean" as unsigned char, not int, on Windows systems.
+ */
+#ifdef _WIN32
+#ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
+typedef unsigned char boolean;
+#endif
+#define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
+#endif
+
+
+/*
+ * The following options affect code selection within the JPEG library,
+ * but they don't need to be visible to applications using the library.
+ * To minimize application namespace pollution, the symbols won't be
+ * defined unless JPEG_INTERNALS has been defined.
+ */
+
+#ifdef JPEG_INTERNALS
+
+/* Define this if your compiler implements ">>" on signed values as a logical
+ * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift,
+ * which is the normal and rational definition.
+ */
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+
+#endif /* JPEG_INTERNALS */
+
+
+/*
+ * The remaining options do not affect the JPEG library proper,
+ * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c).
+ * Other applications can ignore these.
+ */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+/* These defines indicate which image (non-JPEG) file formats are allowed. */
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+/* Define this if you want to name both input and output files on the command
+ * line, rather than using stdout and optionally stdin.  You MUST do this if
+ * your system can't cope with binary I/O to stdin/stdout.  See comments at
+ * head of cjpeg.c or djpeg.c.
+ */
+#undef TWO_FILE_COMMANDLINE
+
+/* Define this if your system needs explicit cleanup of temporary files.
+ * This is crucial under MS-DOS, where the temporary "files" may be areas
+ * of extended memory; on most other systems it's not as important.
+ */
+#undef NEED_SIGNAL_CATCHER
+
+/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb").
+ * This is necessary on systems that distinguish text files from binary files,
+ * and is harmless on most systems that don't.  If you have one of the rare
+ * systems that complains about the "b" spec, define this symbol.
+ */
+#undef DONT_USE_B_MODE
+
+/* Define this if you want percent-done progress reports from cjpeg/djpeg.
+ */
+#undef PROGRESS_REPORT
+
+
+#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jpeg-8d/jconfig.vc b/jpeg-8d/jconfig.vc
new file mode 100644
index 0000000..679404d
--- /dev/null
+++ b/jpeg-8d/jconfig.vc
@@ -0,0 +1,45 @@
+/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS	/* we presume a 32-bit flat memory model */
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+/* Define "boolean" as unsigned char, not int, per Windows custom */
+#ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
+typedef unsigned char boolean;
+#endif
+#define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
+
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE	/* optional */
+#define USE_SETMODE		/* Microsoft has setmode() */
+#undef NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jpeg-8d/jconfig.vms b/jpeg-8d/jconfig.vms
new file mode 100644
index 0000000..8337b0b
--- /dev/null
+++ b/jpeg-8d/jconfig.vms
@@ -0,0 +1,37 @@
+/* jconfig.vms --- jconfig.h for use on Digital VMS. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE	/* Needed on VMS */
+#undef NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jpeg-8d/jconfig.wat b/jpeg-8d/jconfig.wat
new file mode 100644
index 0000000..190cc75
--- /dev/null
+++ b/jpeg-8d/jconfig.wat
@@ -0,0 +1,38 @@
+/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#define CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS	/* Watcom uses flat 32-bit addressing */
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#undef TWO_FILE_COMMANDLINE	/* optional */
+#define USE_SETMODE		/* Needed to make one-file style work in Watcom */
+#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */
diff --git a/jpeg-8d/jcparam.c b/jpeg-8d/jcparam.c
new file mode 100644
index 0000000..c5e85dd
--- /dev/null
+++ b/jpeg-8d/jcparam.c
@@ -0,0 +1,632 @@
+/*
+ * jcparam.c
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2003-2008 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains optional default-setting code for the JPEG compressor.
+ * Applications do not have to use this file, but those that don't use it
+ * must know a lot more about the innards of the JPEG code.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * Quantization table setup routines
+ */
+
+GLOBAL(void)
+jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
+		      const unsigned int *basic_table,
+		      int scale_factor, boolean force_baseline)
+/* Define a quantization table equal to the basic_table times
+ * a scale factor (given as a percentage).
+ * If force_baseline is TRUE, the computed quantization table entries
+ * are limited to 1..255 for JPEG baseline compatibility.
+ */
+{
+  JQUANT_TBL ** qtblptr;
+  int i;
+  long temp;
+
+  /* Safety check to ensure start_compress not called yet. */
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS)
+    ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl);
+
+  qtblptr = & cinfo->quant_tbl_ptrs[which_tbl];
+
+  if (*qtblptr == NULL)
+    *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo);
+
+  for (i = 0; i < DCTSIZE2; i++) {
+    temp = ((long) basic_table[i] * scale_factor + 50L) / 100L;
+    /* limit the values to the valid range */
+    if (temp <= 0L) temp = 1L;
+    if (temp > 32767L) temp = 32767L; /* max quantizer needed for 12 bits */
+    if (force_baseline && temp > 255L)
+      temp = 255L;		/* limit to baseline range if requested */
+    (*qtblptr)->quantval[i] = (UINT16) temp;
+  }
+
+  /* Initialize sent_table FALSE so table will be written to JPEG file. */
+  (*qtblptr)->sent_table = FALSE;
+}
+
+
+/* These are the sample quantization tables given in JPEG spec section K.1.
+ * The spec says that the values given produce "good" quality, and
+ * when divided by 2, "very good" quality.
+ */
+static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = {
+  16,  11,  10,  16,  24,  40,  51,  61,
+  12,  12,  14,  19,  26,  58,  60,  55,
+  14,  13,  16,  24,  40,  57,  69,  56,
+  14,  17,  22,  29,  51,  87,  80,  62,
+  18,  22,  37,  56,  68, 109, 103,  77,
+  24,  35,  55,  64,  81, 104, 113,  92,
+  49,  64,  78,  87, 103, 121, 120, 101,
+  72,  92,  95,  98, 112, 100, 103,  99
+};
+static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = {
+  17,  18,  24,  47,  99,  99,  99,  99,
+  18,  21,  26,  66,  99,  99,  99,  99,
+  24,  26,  56,  99,  99,  99,  99,  99,
+  47,  66,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99
+};
+
+
+GLOBAL(void)
+jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline)
+/* Set or change the 'quality' (quantization) setting, using default tables
+ * and straight percentage-scaling quality scales.
+ * This entry point allows different scalings for luminance and chrominance.
+ */
+{
+  /* Set up two quantization tables using the specified scaling */
+  jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl,
+		       cinfo->q_scale_factor[0], force_baseline);
+  jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl,
+		       cinfo->q_scale_factor[1], force_baseline);
+}
+
+
+GLOBAL(void)
+jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
+			 boolean force_baseline)
+/* Set or change the 'quality' (quantization) setting, using default tables
+ * and a straight percentage-scaling quality scale.  In most cases it's better
+ * to use jpeg_set_quality (below); this entry point is provided for
+ * applications that insist on a linear percentage scaling.
+ */
+{
+  /* Set up two quantization tables using the specified scaling */
+  jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl,
+		       scale_factor, force_baseline);
+  jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl,
+		       scale_factor, force_baseline);
+}
+
+
+GLOBAL(int)
+jpeg_quality_scaling (int quality)
+/* Convert a user-specified quality rating to a percentage scaling factor
+ * for an underlying quantization table, using our recommended scaling curve.
+ * The input 'quality' factor should be 0 (terrible) to 100 (very good).
+ */
+{
+  /* Safety limit on quality factor.  Convert 0 to 1 to avoid zero divide. */
+  if (quality <= 0) quality = 1;
+  if (quality > 100) quality = 100;
+
+  /* The basic table is used as-is (scaling 100) for a quality of 50.
+   * Qualities 50..100 are converted to scaling percentage 200 - 2*Q;
+   * note that at Q=100 the scaling is 0, which will cause jpeg_add_quant_table
+   * to make all the table entries 1 (hence, minimum quantization loss).
+   * Qualities 1..50 are converted to scaling percentage 5000/Q.
+   */
+  if (quality < 50)
+    quality = 5000 / quality;
+  else
+    quality = 200 - quality*2;
+
+  return quality;
+}
+
+
+GLOBAL(void)
+jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline)
+/* Set or change the 'quality' (quantization) setting, using default tables.
+ * This is the standard quality-adjusting entry point for typical user
+ * interfaces; only those who want detailed control over quantization tables
+ * would use the preceding three routines directly.
+ */
+{
+  /* Convert user 0-100 rating to percentage scaling */
+  quality = jpeg_quality_scaling(quality);
+
+  /* Set up standard quality tables */
+  jpeg_set_linear_quality(cinfo, quality, force_baseline);
+}
+
+
+/*
+ * Huffman table setup routines
+ */
+
+LOCAL(void)
+add_huff_table (j_compress_ptr cinfo,
+		JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val)
+/* Define a Huffman table */
+{
+  int nsymbols, len;
+
+  if (*htblptr == NULL)
+    *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
+
+  /* Copy the number-of-symbols-of-each-code-length counts */
+  MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits));
+
+  /* Validate the counts.  We do this here mainly so we can copy the right
+   * number of symbols from the val[] array, without risking marching off
+   * the end of memory.  jchuff.c will do a more thorough test later.
+   */
+  nsymbols = 0;
+  for (len = 1; len <= 16; len++)
+    nsymbols += bits[len];
+  if (nsymbols < 1 || nsymbols > 256)
+    ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+
+  MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8));
+
+  /* Initialize sent_table FALSE so table will be written to JPEG file. */
+  (*htblptr)->sent_table = FALSE;
+}
+
+
+LOCAL(void)
+std_huff_tables (j_compress_ptr cinfo)
+/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */
+/* IMPORTANT: these are only valid for 8-bit data precision! */
+{
+  static const UINT8 bits_dc_luminance[17] =
+    { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 };
+  static const UINT8 val_dc_luminance[] =
+    { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 };
+  
+  static const UINT8 bits_dc_chrominance[17] =
+    { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 };
+  static const UINT8 val_dc_chrominance[] =
+    { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 };
+  
+  static const UINT8 bits_ac_luminance[17] =
+    { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d };
+  static const UINT8 val_ac_luminance[] =
+    { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12,
+      0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07,
+      0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08,
+      0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0,
+      0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16,
+      0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28,
+      0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39,
+      0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49,
+      0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59,
+      0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69,
+      0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79,
+      0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89,
+      0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98,
+      0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7,
+      0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6,
+      0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5,
+      0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4,
+      0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2,
+      0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea,
+      0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
+      0xf9, 0xfa };
+  
+  static const UINT8 bits_ac_chrominance[17] =
+    { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 };
+  static const UINT8 val_ac_chrominance[] =
+    { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21,
+      0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71,
+      0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91,
+      0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0,
+      0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34,
+      0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26,
+      0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38,
+      0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48,
+      0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58,
+      0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68,
+      0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
+      0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
+      0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96,
+      0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5,
+      0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4,
+      0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3,
+      0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2,
+      0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda,
+      0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9,
+      0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
+      0xf9, 0xfa };
+  
+  add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0],
+		 bits_dc_luminance, val_dc_luminance);
+  add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0],
+		 bits_ac_luminance, val_ac_luminance);
+  add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1],
+		 bits_dc_chrominance, val_dc_chrominance);
+  add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1],
+		 bits_ac_chrominance, val_ac_chrominance);
+}
+
+
+/*
+ * Default parameter setup for compression.
+ *
+ * Applications that don't choose to use this routine must do their
+ * own setup of all these parameters.  Alternately, you can call this
+ * to establish defaults and then alter parameters selectively.  This
+ * is the recommended approach since, if we add any new parameters,
+ * your code will still work (they'll be set to reasonable defaults).
+ */
+
+GLOBAL(void)
+jpeg_set_defaults (j_compress_ptr cinfo)
+{
+  int i;
+
+  /* Safety check to ensure start_compress not called yet. */
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  /* Allocate comp_info array large enough for maximum component count.
+   * Array is made permanent in case application wants to compress
+   * multiple images at same param settings.
+   */
+  if (cinfo->comp_info == NULL)
+    cinfo->comp_info = (jpeg_component_info *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  MAX_COMPONENTS * SIZEOF(jpeg_component_info));
+
+  /* Initialize everything not dependent on the color space */
+
+  cinfo->scale_num = 1;		/* 1:1 scaling */
+  cinfo->scale_denom = 1;
+  cinfo->data_precision = BITS_IN_JSAMPLE;
+  /* Set up two quantization tables using default quality of 75 */
+  jpeg_set_quality(cinfo, 75, TRUE);
+  /* Set up two Huffman tables */
+  std_huff_tables(cinfo);
+
+  /* Initialize default arithmetic coding conditioning */
+  for (i = 0; i < NUM_ARITH_TBLS; i++) {
+    cinfo->arith_dc_L[i] = 0;
+    cinfo->arith_dc_U[i] = 1;
+    cinfo->arith_ac_K[i] = 5;
+  }
+
+  /* Default is no multiple-scan output */
+  cinfo->scan_info = NULL;
+  cinfo->num_scans = 0;
+
+  /* Expect normal source image, not raw downsampled data */
+  cinfo->raw_data_in = FALSE;
+
+  /* Use Huffman coding, not arithmetic coding, by default */
+  cinfo->arith_code = FALSE;
+
+  /* By default, don't do extra passes to optimize entropy coding */
+  cinfo->optimize_coding = FALSE;
+  /* The standard Huffman tables are only valid for 8-bit data precision.
+   * If the precision is higher, force optimization on so that usable
+   * tables will be computed.  This test can be removed if default tables
+   * are supplied that are valid for the desired precision.
+   */
+  if (cinfo->data_precision > 8)
+    cinfo->optimize_coding = TRUE;
+
+  /* By default, use the simpler non-cosited sampling alignment */
+  cinfo->CCIR601_sampling = FALSE;
+
+  /* By default, apply fancy downsampling */
+  cinfo->do_fancy_downsampling = TRUE;
+
+  /* No input smoothing */
+  cinfo->smoothing_factor = 0;
+
+  /* DCT algorithm preference */
+  cinfo->dct_method = JDCT_DEFAULT;
+
+  /* No restart markers */
+  cinfo->restart_interval = 0;
+  cinfo->restart_in_rows = 0;
+
+  /* Fill in default JFIF marker parameters.  Note that whether the marker
+   * will actually be written is determined by jpeg_set_colorspace.
+   *
+   * By default, the library emits JFIF version code 1.01.
+   * An application that wants to emit JFIF 1.02 extension markers should set
+   * JFIF_minor_version to 2.  We could probably get away with just defaulting
+   * to 1.02, but there may still be some decoders in use that will complain
+   * about that; saying 1.01 should minimize compatibility problems.
+   */
+  cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */
+  cinfo->JFIF_minor_version = 1;
+  cinfo->density_unit = 0;	/* Pixel size is unknown by default */
+  cinfo->X_density = 1;		/* Pixel aspect ratio is square by default */
+  cinfo->Y_density = 1;
+
+  /* Choose JPEG colorspace based on input space, set defaults accordingly */
+
+  jpeg_default_colorspace(cinfo);
+}
+
+
+/*
+ * Select an appropriate JPEG colorspace for in_color_space.
+ */
+
+GLOBAL(void)
+jpeg_default_colorspace (j_compress_ptr cinfo)
+{
+  switch (cinfo->in_color_space) {
+  case JCS_GRAYSCALE:
+    jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
+    break;
+  case JCS_RGB:
+    jpeg_set_colorspace(cinfo, JCS_YCbCr);
+    break;
+  case JCS_YCbCr:
+    jpeg_set_colorspace(cinfo, JCS_YCbCr);
+    break;
+  case JCS_CMYK:
+    jpeg_set_colorspace(cinfo, JCS_CMYK); /* By default, no translation */
+    break;
+  case JCS_YCCK:
+    jpeg_set_colorspace(cinfo, JCS_YCCK);
+    break;
+  case JCS_UNKNOWN:
+    jpeg_set_colorspace(cinfo, JCS_UNKNOWN);
+    break;
+  default:
+    ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
+  }
+}
+
+
+/*
+ * Set the JPEG colorspace, and choose colorspace-dependent default values.
+ */
+
+GLOBAL(void)
+jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
+{
+  jpeg_component_info * compptr;
+  int ci;
+
+#define SET_COMP(index,id,hsamp,vsamp,quant,dctbl,actbl)  \
+  (compptr = &cinfo->comp_info[index], \
+   compptr->component_id = (id), \
+   compptr->h_samp_factor = (hsamp), \
+   compptr->v_samp_factor = (vsamp), \
+   compptr->quant_tbl_no = (quant), \
+   compptr->dc_tbl_no = (dctbl), \
+   compptr->ac_tbl_no = (actbl) )
+
+  /* Safety check to ensure start_compress not called yet. */
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  /* For all colorspaces, we use Q and Huff tables 0 for luminance components,
+   * tables 1 for chrominance components.
+   */
+
+  cinfo->jpeg_color_space = colorspace;
+
+  cinfo->write_JFIF_header = FALSE; /* No marker for non-JFIF colorspaces */
+  cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */
+
+  switch (colorspace) {
+  case JCS_GRAYSCALE:
+    cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
+    cinfo->num_components = 1;
+    /* JFIF specifies component ID 1 */
+    SET_COMP(0, 1, 1,1, 0, 0,0);
+    break;
+  case JCS_RGB:
+    cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */
+    cinfo->num_components = 3;
+    SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0);
+    SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0);
+    SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0);
+    break;
+  case JCS_YCbCr:
+    cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
+    cinfo->num_components = 3;
+    /* JFIF specifies component IDs 1,2,3 */
+    /* We default to 2x2 subsamples of chrominance */
+    SET_COMP(0, 1, 2,2, 0, 0,0);
+    SET_COMP(1, 2, 1,1, 1, 1,1);
+    SET_COMP(2, 3, 1,1, 1, 1,1);
+    break;
+  case JCS_CMYK:
+    cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */
+    cinfo->num_components = 4;
+    SET_COMP(0, 0x43 /* 'C' */, 1,1, 0, 0,0);
+    SET_COMP(1, 0x4D /* 'M' */, 1,1, 0, 0,0);
+    SET_COMP(2, 0x59 /* 'Y' */, 1,1, 0, 0,0);
+    SET_COMP(3, 0x4B /* 'K' */, 1,1, 0, 0,0);
+    break;
+  case JCS_YCCK:
+    cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */
+    cinfo->num_components = 4;
+    SET_COMP(0, 1, 2,2, 0, 0,0);
+    SET_COMP(1, 2, 1,1, 1, 1,1);
+    SET_COMP(2, 3, 1,1, 1, 1,1);
+    SET_COMP(3, 4, 2,2, 0, 0,0);
+    break;
+  case JCS_UNKNOWN:
+    cinfo->num_components = cinfo->input_components;
+    if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS)
+      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+	       MAX_COMPONENTS);
+    for (ci = 0; ci < cinfo->num_components; ci++) {
+      SET_COMP(ci, ci, 1,1, 0, 0,0);
+    }
+    break;
+  default:
+    ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+  }
+}
+
+
+#ifdef C_PROGRESSIVE_SUPPORTED
+
+LOCAL(jpeg_scan_info *)
+fill_a_scan (jpeg_scan_info * scanptr, int ci,
+	     int Ss, int Se, int Ah, int Al)
+/* Support routine: generate one scan for specified component */
+{
+  scanptr->comps_in_scan = 1;
+  scanptr->component_index[0] = ci;
+  scanptr->Ss = Ss;
+  scanptr->Se = Se;
+  scanptr->Ah = Ah;
+  scanptr->Al = Al;
+  scanptr++;
+  return scanptr;
+}
+
+LOCAL(jpeg_scan_info *)
+fill_scans (jpeg_scan_info * scanptr, int ncomps,
+	    int Ss, int Se, int Ah, int Al)
+/* Support routine: generate one scan for each component */
+{
+  int ci;
+
+  for (ci = 0; ci < ncomps; ci++) {
+    scanptr->comps_in_scan = 1;
+    scanptr->component_index[0] = ci;
+    scanptr->Ss = Ss;
+    scanptr->Se = Se;
+    scanptr->Ah = Ah;
+    scanptr->Al = Al;
+    scanptr++;
+  }
+  return scanptr;
+}
+
+LOCAL(jpeg_scan_info *)
+fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al)
+/* Support routine: generate interleaved DC scan if possible, else N scans */
+{
+  int ci;
+
+  if (ncomps <= MAX_COMPS_IN_SCAN) {
+    /* Single interleaved DC scan */
+    scanptr->comps_in_scan = ncomps;
+    for (ci = 0; ci < ncomps; ci++)
+      scanptr->component_index[ci] = ci;
+    scanptr->Ss = scanptr->Se = 0;
+    scanptr->Ah = Ah;
+    scanptr->Al = Al;
+    scanptr++;
+  } else {
+    /* Noninterleaved DC scan for each component */
+    scanptr = fill_scans(scanptr, ncomps, 0, 0, Ah, Al);
+  }
+  return scanptr;
+}
+
+
+/*
+ * Create a recommended progressive-JPEG script.
+ * cinfo->num_components and cinfo->jpeg_color_space must be correct.
+ */
+
+GLOBAL(void)
+jpeg_simple_progression (j_compress_ptr cinfo)
+{
+  int ncomps = cinfo->num_components;
+  int nscans;
+  jpeg_scan_info * scanptr;
+
+  /* Safety check to ensure start_compress not called yet. */
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  /* Figure space needed for script.  Calculation must match code below! */
+  if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) {
+    /* Custom script for YCbCr color images. */
+    nscans = 10;
+  } else {
+    /* All-purpose script for other color spaces. */
+    if (ncomps > MAX_COMPS_IN_SCAN)
+      nscans = 6 * ncomps;	/* 2 DC + 4 AC scans per component */
+    else
+      nscans = 2 + 4 * ncomps;	/* 2 DC scans; 4 AC scans per component */
+  }
+
+  /* Allocate space for script.
+   * We need to put it in the permanent pool in case the application performs
+   * multiple compressions without changing the settings.  To avoid a memory
+   * leak if jpeg_simple_progression is called repeatedly for the same JPEG
+   * object, we try to re-use previously allocated space, and we allocate
+   * enough space to handle YCbCr even if initially asked for grayscale.
+   */
+  if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) {
+    cinfo->script_space_size = MAX(nscans, 10);
+    cinfo->script_space = (jpeg_scan_info *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+			cinfo->script_space_size * SIZEOF(jpeg_scan_info));
+  }
+  scanptr = cinfo->script_space;
+  cinfo->scan_info = scanptr;
+  cinfo->num_scans = nscans;
+
+  if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) {
+    /* Custom script for YCbCr color images. */
+    /* Initial DC scan */
+    scanptr = fill_dc_scans(scanptr, ncomps, 0, 1);
+    /* Initial AC scan: get some luma data out in a hurry */
+    scanptr = fill_a_scan(scanptr, 0, 1, 5, 0, 2);
+    /* Chroma data is too small to be worth expending many scans on */
+    scanptr = fill_a_scan(scanptr, 2, 1, 63, 0, 1);
+    scanptr = fill_a_scan(scanptr, 1, 1, 63, 0, 1);
+    /* Complete spectral selection for luma AC */
+    scanptr = fill_a_scan(scanptr, 0, 6, 63, 0, 2);
+    /* Refine next bit of luma AC */
+    scanptr = fill_a_scan(scanptr, 0, 1, 63, 2, 1);
+    /* Finish DC successive approximation */
+    scanptr = fill_dc_scans(scanptr, ncomps, 1, 0);
+    /* Finish AC successive approximation */
+    scanptr = fill_a_scan(scanptr, 2, 1, 63, 1, 0);
+    scanptr = fill_a_scan(scanptr, 1, 1, 63, 1, 0);
+    /* Luma bottom bit comes last since it's usually largest scan */
+    scanptr = fill_a_scan(scanptr, 0, 1, 63, 1, 0);
+  } else {
+    /* All-purpose script for other color spaces. */
+    /* Successive approximation first pass */
+    scanptr = fill_dc_scans(scanptr, ncomps, 0, 1);
+    scanptr = fill_scans(scanptr, ncomps, 1, 5, 0, 2);
+    scanptr = fill_scans(scanptr, ncomps, 6, 63, 0, 2);
+    /* Successive approximation second pass */
+    scanptr = fill_scans(scanptr, ncomps, 1, 63, 2, 1);
+    /* Successive approximation final pass */
+    scanptr = fill_dc_scans(scanptr, ncomps, 1, 0);
+    scanptr = fill_scans(scanptr, ncomps, 1, 63, 1, 0);
+  }
+}
+
+#endif /* C_PROGRESSIVE_SUPPORTED */
diff --git a/jpeg-8d/jcprepct.c b/jpeg-8d/jcprepct.c
new file mode 100644
index 0000000..be44cc4
--- /dev/null
+++ b/jpeg-8d/jcprepct.c
@@ -0,0 +1,358 @@
+/*
+ * jcprepct.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the compression preprocessing controller.
+ * This controller manages the color conversion, downsampling,
+ * and edge expansion steps.
+ *
+ * Most of the complexity here is associated with buffering input rows
+ * as required by the downsampler.  See the comments at the head of
+ * jcsample.c for the downsampler's needs.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* At present, jcsample.c can request context rows only for smoothing.
+ * In the future, we might also need context rows for CCIR601 sampling
+ * or other more-complex downsampling procedures.  The code to support
+ * context rows should be compiled only if needed.
+ */
+#ifdef INPUT_SMOOTHING_SUPPORTED
+#define CONTEXT_ROWS_SUPPORTED
+#endif
+
+
+/*
+ * For the simple (no-context-row) case, we just need to buffer one
+ * row group's worth of pixels for the downsampling step.  At the bottom of
+ * the image, we pad to a full row group by replicating the last pixel row.
+ * The downsampler's last output row is then replicated if needed to pad
+ * out to a full iMCU row.
+ *
+ * When providing context rows, we must buffer three row groups' worth of
+ * pixels.  Three row groups are physically allocated, but the row pointer
+ * arrays are made five row groups high, with the extra pointers above and
+ * below "wrapping around" to point to the last and first real row groups.
+ * This allows the downsampler to access the proper context rows.
+ * At the top and bottom of the image, we create dummy context rows by
+ * copying the first or last real pixel row.  This copying could be avoided
+ * by pointer hacking as is done in jdmainct.c, but it doesn't seem worth the
+ * trouble on the compression side.
+ */
+
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_c_prep_controller pub; /* public fields */
+
+  /* Downsampling input buffer.  This buffer holds color-converted data
+   * until we have enough to do a downsample step.
+   */
+  JSAMPARRAY color_buf[MAX_COMPONENTS];
+
+  JDIMENSION rows_to_go;	/* counts rows remaining in source image */
+  int next_buf_row;		/* index of next row to store in color_buf */
+
+#ifdef CONTEXT_ROWS_SUPPORTED	/* only needed for context case */
+  int this_row_group;		/* starting row index of group to process */
+  int next_buf_stop;		/* downsample when we reach this index */
+#endif
+} my_prep_controller;
+
+typedef my_prep_controller * my_prep_ptr;
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF(void)
+start_pass_prep (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
+
+  if (pass_mode != JBUF_PASS_THRU)
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+
+  /* Initialize total-height counter for detecting bottom of image */
+  prep->rows_to_go = cinfo->image_height;
+  /* Mark the conversion buffer empty */
+  prep->next_buf_row = 0;
+#ifdef CONTEXT_ROWS_SUPPORTED
+  /* Preset additional state variables for context mode.
+   * These aren't used in non-context mode, so we needn't test which mode.
+   */
+  prep->this_row_group = 0;
+  /* Set next_buf_stop to stop after two row groups have been read in. */
+  prep->next_buf_stop = 2 * cinfo->max_v_samp_factor;
+#endif
+}
+
+
+/*
+ * Expand an image vertically from height input_rows to height output_rows,
+ * by duplicating the bottom row.
+ */
+
+LOCAL(void)
+expand_bottom_edge (JSAMPARRAY image_data, JDIMENSION num_cols,
+		    int input_rows, int output_rows)
+{
+  register int row;
+
+  for (row = input_rows; row < output_rows; row++) {
+    jcopy_sample_rows(image_data, input_rows-1, image_data, row,
+		      1, num_cols);
+  }
+}
+
+
+/*
+ * Process some data in the simple no-context case.
+ *
+ * Preprocessor output data is counted in "row groups".  A row group
+ * is defined to be v_samp_factor sample rows of each component.
+ * Downsampling will produce this much data from each max_v_samp_factor
+ * input rows.
+ */
+
+METHODDEF(void)
+pre_process_data (j_compress_ptr cinfo,
+		  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+		  JDIMENSION in_rows_avail,
+		  JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr,
+		  JDIMENSION out_row_groups_avail)
+{
+  my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
+  int numrows, ci;
+  JDIMENSION inrows;
+  jpeg_component_info * compptr;
+
+  while (*in_row_ctr < in_rows_avail &&
+	 *out_row_group_ctr < out_row_groups_avail) {
+    /* Do color conversion to fill the conversion buffer. */
+    inrows = in_rows_avail - *in_row_ctr;
+    numrows = cinfo->max_v_samp_factor - prep->next_buf_row;
+    numrows = (int) MIN((JDIMENSION) numrows, inrows);
+    (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr,
+				       prep->color_buf,
+				       (JDIMENSION) prep->next_buf_row,
+				       numrows);
+    *in_row_ctr += numrows;
+    prep->next_buf_row += numrows;
+    prep->rows_to_go -= numrows;
+    /* If at bottom of image, pad to fill the conversion buffer. */
+    if (prep->rows_to_go == 0 &&
+	prep->next_buf_row < cinfo->max_v_samp_factor) {
+      for (ci = 0; ci < cinfo->num_components; ci++) {
+	expand_bottom_edge(prep->color_buf[ci], cinfo->image_width,
+			   prep->next_buf_row, cinfo->max_v_samp_factor);
+      }
+      prep->next_buf_row = cinfo->max_v_samp_factor;
+    }
+    /* If we've filled the conversion buffer, empty it. */
+    if (prep->next_buf_row == cinfo->max_v_samp_factor) {
+      (*cinfo->downsample->downsample) (cinfo,
+					prep->color_buf, (JDIMENSION) 0,
+					output_buf, *out_row_group_ctr);
+      prep->next_buf_row = 0;
+      (*out_row_group_ctr)++;
+    }
+    /* If at bottom of image, pad the output to a full iMCU height.
+     * Note we assume the caller is providing a one-iMCU-height output buffer!
+     */
+    if (prep->rows_to_go == 0 &&
+	*out_row_group_ctr < out_row_groups_avail) {
+      for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	   ci++, compptr++) {
+	numrows = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+		  cinfo->min_DCT_v_scaled_size;
+	expand_bottom_edge(output_buf[ci],
+			   compptr->width_in_blocks * compptr->DCT_h_scaled_size,
+			   (int) (*out_row_group_ctr * numrows),
+			   (int) (out_row_groups_avail * numrows));
+      }
+      *out_row_group_ctr = out_row_groups_avail;
+      break;			/* can exit outer loop without test */
+    }
+  }
+}
+
+
+#ifdef CONTEXT_ROWS_SUPPORTED
+
+/*
+ * Process some data in the context case.
+ */
+
+METHODDEF(void)
+pre_process_context (j_compress_ptr cinfo,
+		     JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+		     JDIMENSION in_rows_avail,
+		     JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr,
+		     JDIMENSION out_row_groups_avail)
+{
+  my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
+  int numrows, ci;
+  int buf_height = cinfo->max_v_samp_factor * 3;
+  JDIMENSION inrows;
+
+  while (*out_row_group_ctr < out_row_groups_avail) {
+    if (*in_row_ctr < in_rows_avail) {
+      /* Do color conversion to fill the conversion buffer. */
+      inrows = in_rows_avail - *in_row_ctr;
+      numrows = prep->next_buf_stop - prep->next_buf_row;
+      numrows = (int) MIN((JDIMENSION) numrows, inrows);
+      (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr,
+					 prep->color_buf,
+					 (JDIMENSION) prep->next_buf_row,
+					 numrows);
+      /* Pad at top of image, if first time through */
+      if (prep->rows_to_go == cinfo->image_height) {
+	for (ci = 0; ci < cinfo->num_components; ci++) {
+	  int row;
+	  for (row = 1; row <= cinfo->max_v_samp_factor; row++) {
+	    jcopy_sample_rows(prep->color_buf[ci], 0,
+			      prep->color_buf[ci], -row,
+			      1, cinfo->image_width);
+	  }
+	}
+      }
+      *in_row_ctr += numrows;
+      prep->next_buf_row += numrows;
+      prep->rows_to_go -= numrows;
+    } else {
+      /* Return for more data, unless we are at the bottom of the image. */
+      if (prep->rows_to_go != 0)
+	break;
+      /* When at bottom of image, pad to fill the conversion buffer. */
+      if (prep->next_buf_row < prep->next_buf_stop) {
+	for (ci = 0; ci < cinfo->num_components; ci++) {
+	  expand_bottom_edge(prep->color_buf[ci], cinfo->image_width,
+			     prep->next_buf_row, prep->next_buf_stop);
+	}
+	prep->next_buf_row = prep->next_buf_stop;
+      }
+    }
+    /* If we've gotten enough data, downsample a row group. */
+    if (prep->next_buf_row == prep->next_buf_stop) {
+      (*cinfo->downsample->downsample) (cinfo,
+					prep->color_buf,
+					(JDIMENSION) prep->this_row_group,
+					output_buf, *out_row_group_ctr);
+      (*out_row_group_ctr)++;
+      /* Advance pointers with wraparound as necessary. */
+      prep->this_row_group += cinfo->max_v_samp_factor;
+      if (prep->this_row_group >= buf_height)
+	prep->this_row_group = 0;
+      if (prep->next_buf_row >= buf_height)
+	prep->next_buf_row = 0;
+      prep->next_buf_stop = prep->next_buf_row + cinfo->max_v_samp_factor;
+    }
+  }
+}
+
+
+/*
+ * Create the wrapped-around downsampling input buffer needed for context mode.
+ */
+
+LOCAL(void)
+create_context_buffer (j_compress_ptr cinfo)
+{
+  my_prep_ptr prep = (my_prep_ptr) cinfo->prep;
+  int rgroup_height = cinfo->max_v_samp_factor;
+  int ci, i;
+  jpeg_component_info * compptr;
+  JSAMPARRAY true_buffer, fake_buffer;
+
+  /* Grab enough space for fake row pointers for all the components;
+   * we need five row groups' worth of pointers for each component.
+   */
+  fake_buffer = (JSAMPARRAY)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(cinfo->num_components * 5 * rgroup_height) *
+				SIZEOF(JSAMPROW));
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Allocate the actual buffer space (3 row groups) for this component.
+     * We make the buffer wide enough to allow the downsampler to edge-expand
+     * horizontally within the buffer, if it so chooses.
+     */
+    true_buffer = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (JDIMENSION) (((long) compptr->width_in_blocks *
+		      cinfo->min_DCT_h_scaled_size *
+		      cinfo->max_h_samp_factor) / compptr->h_samp_factor),
+       (JDIMENSION) (3 * rgroup_height));
+    /* Copy true buffer row pointers into the middle of the fake row array */
+    MEMCOPY(fake_buffer + rgroup_height, true_buffer,
+	    3 * rgroup_height * SIZEOF(JSAMPROW));
+    /* Fill in the above and below wraparound pointers */
+    for (i = 0; i < rgroup_height; i++) {
+      fake_buffer[i] = true_buffer[2 * rgroup_height + i];
+      fake_buffer[4 * rgroup_height + i] = true_buffer[i];
+    }
+    prep->color_buf[ci] = fake_buffer + rgroup_height;
+    fake_buffer += 5 * rgroup_height; /* point to space for next component */
+  }
+}
+
+#endif /* CONTEXT_ROWS_SUPPORTED */
+
+
+/*
+ * Initialize preprocessing controller.
+ */
+
+GLOBAL(void)
+jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer)
+{
+  my_prep_ptr prep;
+  int ci;
+  jpeg_component_info * compptr;
+
+  if (need_full_buffer)		/* safety check */
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+
+  prep = (my_prep_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_prep_controller));
+  cinfo->prep = (struct jpeg_c_prep_controller *) prep;
+  prep->pub.start_pass = start_pass_prep;
+
+  /* Allocate the color conversion buffer.
+   * We make the buffer wide enough to allow the downsampler to edge-expand
+   * horizontally within the buffer, if it so chooses.
+   */
+  if (cinfo->downsample->need_context_rows) {
+    /* Set up to provide context rows */
+#ifdef CONTEXT_ROWS_SUPPORTED
+    prep->pub.pre_process_data = pre_process_context;
+    create_context_buffer(cinfo);
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+  } else {
+    /* No context, just make it tall enough for one row group */
+    prep->pub.pre_process_data = pre_process_data;
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      prep->color_buf[ci] = (*cinfo->mem->alloc_sarray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE,
+	 (JDIMENSION) (((long) compptr->width_in_blocks *
+			cinfo->min_DCT_h_scaled_size *
+			cinfo->max_h_samp_factor) / compptr->h_samp_factor),
+	 (JDIMENSION) cinfo->max_v_samp_factor);
+    }
+  }
+}
diff --git a/jpeg-8d/jcsample.c b/jpeg-8d/jcsample.c
new file mode 100644
index 0000000..4d36f85
--- /dev/null
+++ b/jpeg-8d/jcsample.c
@@ -0,0 +1,545 @@
+/*
+ * jcsample.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains downsampling routines.
+ *
+ * Downsampling input data is counted in "row groups".  A row group
+ * is defined to be max_v_samp_factor pixel rows of each component,
+ * from which the downsampler produces v_samp_factor sample rows.
+ * A single row group is processed in each call to the downsampler module.
+ *
+ * The downsampler is responsible for edge-expansion of its output data
+ * to fill an integral number of DCT blocks horizontally.  The source buffer
+ * may be modified if it is helpful for this purpose (the source buffer is
+ * allocated wide enough to correspond to the desired output width).
+ * The caller (the prep controller) is responsible for vertical padding.
+ *
+ * The downsampler may request "context rows" by setting need_context_rows
+ * during startup.  In this case, the input arrays will contain at least
+ * one row group's worth of pixels above and below the passed-in data;
+ * the caller will create dummy rows at image top and bottom by replicating
+ * the first or last real pixel row.
+ *
+ * An excellent reference for image resampling is
+ *   Digital Image Warping, George Wolberg, 1990.
+ *   Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7.
+ *
+ * The downsampling algorithm used here is a simple average of the source
+ * pixels covered by the output pixel.  The hi-falutin sampling literature
+ * refers to this as a "box filter".  In general the characteristics of a box
+ * filter are not very good, but for the specific cases we normally use (1:1
+ * and 2:1 ratios) the box is equivalent to a "triangle filter" which is not
+ * nearly so bad.  If you intend to use other sampling ratios, you'd be well
+ * advised to improve this code.
+ *
+ * A simple input-smoothing capability is provided.  This is mainly intended
+ * for cleaning up color-dithered GIF input files (if you find it inadequate,
+ * we suggest using an external filtering program such as pnmconvol).  When
+ * enabled, each input pixel P is replaced by a weighted sum of itself and its
+ * eight neighbors.  P's weight is 1-8*SF and each neighbor's weight is SF,
+ * where SF = (smoothing_factor / 1024).
+ * Currently, smoothing is only supported for 2h2v sampling factors.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Pointer to routine to downsample a single component */
+typedef JMETHOD(void, downsample1_ptr,
+		(j_compress_ptr cinfo, jpeg_component_info * compptr,
+		 JSAMPARRAY input_data, JSAMPARRAY output_data));
+
+/* Private subobject */
+
+typedef struct {
+  struct jpeg_downsampler pub;	/* public fields */
+
+  /* Downsampling method pointers, one per component */
+  downsample1_ptr methods[MAX_COMPONENTS];
+
+  /* Height of an output row group for each component. */
+  int rowgroup_height[MAX_COMPONENTS];
+
+  /* These arrays save pixel expansion factors so that int_downsample need not
+   * recompute them each time.  They are unused for other downsampling methods.
+   */
+  UINT8 h_expand[MAX_COMPONENTS];
+  UINT8 v_expand[MAX_COMPONENTS];
+} my_downsampler;
+
+typedef my_downsampler * my_downsample_ptr;
+
+
+/*
+ * Initialize for a downsampling pass.
+ */
+
+METHODDEF(void)
+start_pass_downsample (j_compress_ptr cinfo)
+{
+  /* no work for now */
+}
+
+
+/*
+ * Expand a component horizontally from width input_cols to width output_cols,
+ * by duplicating the rightmost samples.
+ */
+
+LOCAL(void)
+expand_right_edge (JSAMPARRAY image_data, int num_rows,
+		   JDIMENSION input_cols, JDIMENSION output_cols)
+{
+  register JSAMPROW ptr;
+  register JSAMPLE pixval;
+  register int count;
+  int row;
+  int numcols = (int) (output_cols - input_cols);
+
+  if (numcols > 0) {
+    for (row = 0; row < num_rows; row++) {
+      ptr = image_data[row] + input_cols;
+      pixval = ptr[-1];		/* don't need GETJSAMPLE() here */
+      for (count = numcols; count > 0; count--)
+	*ptr++ = pixval;
+    }
+  }
+}
+
+
+/*
+ * Do downsampling for a whole row group (all components).
+ *
+ * In this version we simply downsample each component independently.
+ */
+
+METHODDEF(void)
+sep_downsample (j_compress_ptr cinfo,
+		JSAMPIMAGE input_buf, JDIMENSION in_row_index,
+		JSAMPIMAGE output_buf, JDIMENSION out_row_group_index)
+{
+  my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample;
+  int ci;
+  jpeg_component_info * compptr;
+  JSAMPARRAY in_ptr, out_ptr;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    in_ptr = input_buf[ci] + in_row_index;
+    out_ptr = output_buf[ci] +
+	      (out_row_group_index * downsample->rowgroup_height[ci]);
+    (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr);
+  }
+}
+
+
+/*
+ * Downsample pixel values of a single component.
+ * One row group is processed per call.
+ * This version handles arbitrary integral sampling ratios, without smoothing.
+ * Note that this version is not actually used for customary sampling ratios.
+ */
+
+METHODDEF(void)
+int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
+		JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+  my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample;
+  int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v;
+  JDIMENSION outcol, outcol_h;	/* outcol_h == outcol*h_expand */
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
+  JSAMPROW inptr, outptr;
+  INT32 outvalue;
+
+  h_expand = downsample->h_expand[compptr->component_index];
+  v_expand = downsample->v_expand[compptr->component_index];
+  numpix = h_expand * v_expand;
+  numpix2 = numpix/2;
+
+  /* Expand input data enough to let all the output samples be generated
+   * by the standard loop.  Special-casing padded output would be more
+   * efficient.
+   */
+  expand_right_edge(input_data, cinfo->max_v_samp_factor,
+		    cinfo->image_width, output_cols * h_expand);
+
+  inrow = outrow = 0;
+  while (inrow < cinfo->max_v_samp_factor) {
+    outptr = output_data[outrow];
+    for (outcol = 0, outcol_h = 0; outcol < output_cols;
+	 outcol++, outcol_h += h_expand) {
+      outvalue = 0;
+      for (v = 0; v < v_expand; v++) {
+	inptr = input_data[inrow+v] + outcol_h;
+	for (h = 0; h < h_expand; h++) {
+	  outvalue += (INT32) GETJSAMPLE(*inptr++);
+	}
+      }
+      *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix);
+    }
+    inrow += v_expand;
+    outrow++;
+  }
+}
+
+
+/*
+ * Downsample pixel values of a single component.
+ * This version handles the special case of a full-size component,
+ * without smoothing.
+ */
+
+METHODDEF(void)
+fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
+		     JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+  /* Copy the data */
+  jcopy_sample_rows(input_data, 0, output_data, 0,
+		    cinfo->max_v_samp_factor, cinfo->image_width);
+  /* Edge-expand */
+  expand_right_edge(output_data, cinfo->max_v_samp_factor, cinfo->image_width,
+		    compptr->width_in_blocks * compptr->DCT_h_scaled_size);
+}
+
+
+/*
+ * Downsample pixel values of a single component.
+ * This version handles the common case of 2:1 horizontal and 1:1 vertical,
+ * without smoothing.
+ *
+ * A note about the "bias" calculations: when rounding fractional values to
+ * integer, we do not want to always round 0.5 up to the next integer.
+ * If we did that, we'd introduce a noticeable bias towards larger values.
+ * Instead, this code is arranged so that 0.5 will be rounded up or down at
+ * alternate pixel locations (a simple ordered dither pattern).
+ */
+
+METHODDEF(void)
+h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
+		 JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+  int inrow;
+  JDIMENSION outcol;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
+  register JSAMPROW inptr, outptr;
+  register int bias;
+
+  /* Expand input data enough to let all the output samples be generated
+   * by the standard loop.  Special-casing padded output would be more
+   * efficient.
+   */
+  expand_right_edge(input_data, cinfo->max_v_samp_factor,
+		    cinfo->image_width, output_cols * 2);
+
+  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
+    outptr = output_data[inrow];
+    inptr = input_data[inrow];
+    bias = 0;			/* bias = 0,1,0,1,... for successive samples */
+    for (outcol = 0; outcol < output_cols; outcol++) {
+      *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1])
+			      + bias) >> 1);
+      bias ^= 1;		/* 0=>1, 1=>0 */
+      inptr += 2;
+    }
+  }
+}
+
+
+/*
+ * Downsample pixel values of a single component.
+ * This version handles the standard case of 2:1 horizontal and 2:1 vertical,
+ * without smoothing.
+ */
+
+METHODDEF(void)
+h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
+		 JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+  int inrow, outrow;
+  JDIMENSION outcol;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
+  register JSAMPROW inptr0, inptr1, outptr;
+  register int bias;
+
+  /* Expand input data enough to let all the output samples be generated
+   * by the standard loop.  Special-casing padded output would be more
+   * efficient.
+   */
+  expand_right_edge(input_data, cinfo->max_v_samp_factor,
+		    cinfo->image_width, output_cols * 2);
+
+  inrow = outrow = 0;
+  while (inrow < cinfo->max_v_samp_factor) {
+    outptr = output_data[outrow];
+    inptr0 = input_data[inrow];
+    inptr1 = input_data[inrow+1];
+    bias = 1;			/* bias = 1,2,1,2,... for successive samples */
+    for (outcol = 0; outcol < output_cols; outcol++) {
+      *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
+			      GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1])
+			      + bias) >> 2);
+      bias ^= 3;		/* 1=>2, 2=>1 */
+      inptr0 += 2; inptr1 += 2;
+    }
+    inrow += 2;
+    outrow++;
+  }
+}
+
+
+#ifdef INPUT_SMOOTHING_SUPPORTED
+
+/*
+ * Downsample pixel values of a single component.
+ * This version handles the standard case of 2:1 horizontal and 2:1 vertical,
+ * with smoothing.  One row of context is required.
+ */
+
+METHODDEF(void)
+h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
+			JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+  int inrow, outrow;
+  JDIMENSION colctr;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
+  register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr;
+  INT32 membersum, neighsum, memberscale, neighscale;
+
+  /* Expand input data enough to let all the output samples be generated
+   * by the standard loop.  Special-casing padded output would be more
+   * efficient.
+   */
+  expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2,
+		    cinfo->image_width, output_cols * 2);
+
+  /* We don't bother to form the individual "smoothed" input pixel values;
+   * we can directly compute the output which is the average of the four
+   * smoothed values.  Each of the four member pixels contributes a fraction
+   * (1-8*SF) to its own smoothed image and a fraction SF to each of the three
+   * other smoothed pixels, therefore a total fraction (1-5*SF)/4 to the final
+   * output.  The four corner-adjacent neighbor pixels contribute a fraction
+   * SF to just one smoothed pixel, or SF/4 to the final output; while the
+   * eight edge-adjacent neighbors contribute SF to each of two smoothed
+   * pixels, or SF/2 overall.  In order to use integer arithmetic, these
+   * factors are scaled by 2^16 = 65536.
+   * Also recall that SF = smoothing_factor / 1024.
+   */
+
+  memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */
+  neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */
+
+  inrow = outrow = 0;
+  while (inrow < cinfo->max_v_samp_factor) {
+    outptr = output_data[outrow];
+    inptr0 = input_data[inrow];
+    inptr1 = input_data[inrow+1];
+    above_ptr = input_data[inrow-1];
+    below_ptr = input_data[inrow+2];
+
+    /* Special case for first column: pretend column -1 is same as column 0 */
+    membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
+		GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]);
+    neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) +
+	       GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) +
+	       GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[2]) +
+	       GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[2]);
+    neighsum += neighsum;
+    neighsum += GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[2]) +
+		GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[2]);
+    membersum = membersum * memberscale + neighsum * neighscale;
+    *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
+    inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2;
+
+    for (colctr = output_cols - 2; colctr > 0; colctr--) {
+      /* sum of pixels directly mapped to this output element */
+      membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
+		  GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]);
+      /* sum of edge-neighbor pixels */
+      neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) +
+		 GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) +
+		 GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[2]) +
+		 GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[2]);
+      /* The edge-neighbors count twice as much as corner-neighbors */
+      neighsum += neighsum;
+      /* Add in the corner-neighbors */
+      neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[2]) +
+		  GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[2]);
+      /* form final output scaled up by 2^16 */
+      membersum = membersum * memberscale + neighsum * neighscale;
+      /* round, descale and output it */
+      *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
+      inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2;
+    }
+
+    /* Special case for last column */
+    membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) +
+		GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]);
+    neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) +
+	       GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) +
+	       GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[1]) +
+	       GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[1]);
+    neighsum += neighsum;
+    neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[1]) +
+		GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[1]);
+    membersum = membersum * memberscale + neighsum * neighscale;
+    *outptr = (JSAMPLE) ((membersum + 32768) >> 16);
+
+    inrow += 2;
+    outrow++;
+  }
+}
+
+
+/*
+ * Downsample pixel values of a single component.
+ * This version handles the special case of a full-size component,
+ * with smoothing.  One row of context is required.
+ */
+
+METHODDEF(void)
+fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr,
+			    JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+  int inrow;
+  JDIMENSION colctr;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
+  register JSAMPROW inptr, above_ptr, below_ptr, outptr;
+  INT32 membersum, neighsum, memberscale, neighscale;
+  int colsum, lastcolsum, nextcolsum;
+
+  /* Expand input data enough to let all the output samples be generated
+   * by the standard loop.  Special-casing padded output would be more
+   * efficient.
+   */
+  expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2,
+		    cinfo->image_width, output_cols);
+
+  /* Each of the eight neighbor pixels contributes a fraction SF to the
+   * smoothed pixel, while the main pixel contributes (1-8*SF).  In order
+   * to use integer arithmetic, these factors are multiplied by 2^16 = 65536.
+   * Also recall that SF = smoothing_factor / 1024.
+   */
+
+  memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */
+  neighscale = cinfo->smoothing_factor * 64; /* scaled SF */
+
+  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
+    outptr = output_data[inrow];
+    inptr = input_data[inrow];
+    above_ptr = input_data[inrow-1];
+    below_ptr = input_data[inrow+1];
+
+    /* Special case for first column */
+    colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) +
+	     GETJSAMPLE(*inptr);
+    membersum = GETJSAMPLE(*inptr++);
+    nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) +
+		 GETJSAMPLE(*inptr);
+    neighsum = colsum + (colsum - membersum) + nextcolsum;
+    membersum = membersum * memberscale + neighsum * neighscale;
+    *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
+    lastcolsum = colsum; colsum = nextcolsum;
+
+    for (colctr = output_cols - 2; colctr > 0; colctr--) {
+      membersum = GETJSAMPLE(*inptr++);
+      above_ptr++; below_ptr++;
+      nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) +
+		   GETJSAMPLE(*inptr);
+      neighsum = lastcolsum + (colsum - membersum) + nextcolsum;
+      membersum = membersum * memberscale + neighsum * neighscale;
+      *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16);
+      lastcolsum = colsum; colsum = nextcolsum;
+    }
+
+    /* Special case for last column */
+    membersum = GETJSAMPLE(*inptr);
+    neighsum = lastcolsum + (colsum - membersum) + colsum;
+    membersum = membersum * memberscale + neighsum * neighscale;
+    *outptr = (JSAMPLE) ((membersum + 32768) >> 16);
+
+  }
+}
+
+#endif /* INPUT_SMOOTHING_SUPPORTED */
+
+
+/*
+ * Module initialization routine for downsampling.
+ * Note that we must select a routine for each component.
+ */
+
+GLOBAL(void)
+jinit_downsampler (j_compress_ptr cinfo)
+{
+  my_downsample_ptr downsample;
+  int ci;
+  jpeg_component_info * compptr;
+  boolean smoothok = TRUE;
+  int h_in_group, v_in_group, h_out_group, v_out_group;
+
+  downsample = (my_downsample_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_downsampler));
+  cinfo->downsample = (struct jpeg_downsampler *) downsample;
+  downsample->pub.start_pass = start_pass_downsample;
+  downsample->pub.downsample = sep_downsample;
+  downsample->pub.need_context_rows = FALSE;
+
+  if (cinfo->CCIR601_sampling)
+    ERREXIT(cinfo, JERR_CCIR601_NOTIMPL);
+
+  /* Verify we can handle the sampling factors, and set up method pointers */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Compute size of an "output group" for DCT scaling.  This many samples
+     * are to be converted from max_h_samp_factor * max_v_samp_factor pixels.
+     */
+    h_out_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) /
+		  cinfo->min_DCT_h_scaled_size;
+    v_out_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+		  cinfo->min_DCT_v_scaled_size;
+    h_in_group = cinfo->max_h_samp_factor;
+    v_in_group = cinfo->max_v_samp_factor;
+    downsample->rowgroup_height[ci] = v_out_group; /* save for use later */
+    if (h_in_group == h_out_group && v_in_group == v_out_group) {
+#ifdef INPUT_SMOOTHING_SUPPORTED
+      if (cinfo->smoothing_factor) {
+	downsample->methods[ci] = fullsize_smooth_downsample;
+	downsample->pub.need_context_rows = TRUE;
+      } else
+#endif
+	downsample->methods[ci] = fullsize_downsample;
+    } else if (h_in_group == h_out_group * 2 &&
+	       v_in_group == v_out_group) {
+      smoothok = FALSE;
+      downsample->methods[ci] = h2v1_downsample;
+    } else if (h_in_group == h_out_group * 2 &&
+	       v_in_group == v_out_group * 2) {
+#ifdef INPUT_SMOOTHING_SUPPORTED
+      if (cinfo->smoothing_factor) {
+	downsample->methods[ci] = h2v2_smooth_downsample;
+	downsample->pub.need_context_rows = TRUE;
+      } else
+#endif
+	downsample->methods[ci] = h2v2_downsample;
+    } else if ((h_in_group % h_out_group) == 0 &&
+	       (v_in_group % v_out_group) == 0) {
+      smoothok = FALSE;
+      downsample->methods[ci] = int_downsample;
+      downsample->h_expand[ci] = (UINT8) (h_in_group / h_out_group);
+      downsample->v_expand[ci] = (UINT8) (v_in_group / v_out_group);
+    } else
+      ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL);
+  }
+
+#ifdef INPUT_SMOOTHING_SUPPORTED
+  if (cinfo->smoothing_factor && !smoothok)
+    TRACEMS(cinfo, 0, JTRC_SMOOTH_NOTIMPL);
+#endif
+}
diff --git a/jpeg-8d/jctrans.c b/jpeg-8d/jctrans.c
new file mode 100644
index 0000000..f7d7b81
--- /dev/null
+++ b/jpeg-8d/jctrans.c
@@ -0,0 +1,382 @@
+/*
+ * jctrans.c
+ *
+ * Copyright (C) 1995-1998, Thomas G. Lane.
+ * Modified 2000-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains library routines for transcoding compression,
+ * that is, writing raw DCT coefficient arrays to an output JPEG file.
+ * The routines in jcapimin.c will also be needed by a transcoder.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Forward declarations */
+LOCAL(void) transencode_master_selection
+	JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays));
+LOCAL(void) transencode_coef_controller
+	JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays));
+
+
+/*
+ * Compression initialization for writing raw-coefficient data.
+ * Before calling this, all parameters and a data destination must be set up.
+ * Call jpeg_finish_compress() to actually write the data.
+ *
+ * The number of passed virtual arrays must match cinfo->num_components.
+ * Note that the virtual arrays need not be filled or even realized at
+ * the time write_coefficients is called; indeed, if the virtual arrays
+ * were requested from this compression object's memory manager, they
+ * typically will be realized during this routine and filled afterwards.
+ */
+
+GLOBAL(void)
+jpeg_write_coefficients (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)
+{
+  if (cinfo->global_state != CSTATE_START)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  /* Mark all tables to be written */
+  jpeg_suppress_tables(cinfo, FALSE);
+  /* (Re)initialize error mgr and destination modules */
+  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
+  (*cinfo->dest->init_destination) (cinfo);
+  /* Perform master selection of active modules */
+  transencode_master_selection(cinfo, coef_arrays);
+  /* Wait for jpeg_finish_compress() call */
+  cinfo->next_scanline = 0;	/* so jpeg_write_marker works */
+  cinfo->global_state = CSTATE_WRCOEFS;
+}
+
+
+/*
+ * Initialize the compression object with default parameters,
+ * then copy from the source object all parameters needed for lossless
+ * transcoding.  Parameters that can be varied without loss (such as
+ * scan script and Huffman optimization) are left in their default states.
+ */
+
+GLOBAL(void)
+jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
+			       j_compress_ptr dstinfo)
+{
+  JQUANT_TBL ** qtblptr;
+  jpeg_component_info *incomp, *outcomp;
+  JQUANT_TBL *c_quant, *slot_quant;
+  int tblno, ci, coefi;
+
+  /* Safety check to ensure start_compress not called yet. */
+  if (dstinfo->global_state != CSTATE_START)
+    ERREXIT1(dstinfo, JERR_BAD_STATE, dstinfo->global_state);
+  /* Copy fundamental image dimensions */
+  dstinfo->image_width = srcinfo->image_width;
+  dstinfo->image_height = srcinfo->image_height;
+  dstinfo->input_components = srcinfo->num_components;
+  dstinfo->in_color_space = srcinfo->jpeg_color_space;
+  dstinfo->jpeg_width = srcinfo->output_width;
+  dstinfo->jpeg_height = srcinfo->output_height;
+  dstinfo->min_DCT_h_scaled_size = srcinfo->min_DCT_h_scaled_size;
+  dstinfo->min_DCT_v_scaled_size = srcinfo->min_DCT_v_scaled_size;
+  /* Initialize all parameters to default values */
+  jpeg_set_defaults(dstinfo);
+  /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB.
+   * Fix it to get the right header markers for the image colorspace.
+   */
+  jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space);
+  dstinfo->data_precision = srcinfo->data_precision;
+  dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling;
+  /* Copy the source's quantization tables. */
+  for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
+    if (srcinfo->quant_tbl_ptrs[tblno] != NULL) {
+      qtblptr = & dstinfo->quant_tbl_ptrs[tblno];
+      if (*qtblptr == NULL)
+	*qtblptr = jpeg_alloc_quant_table((j_common_ptr) dstinfo);
+      MEMCOPY((*qtblptr)->quantval,
+	      srcinfo->quant_tbl_ptrs[tblno]->quantval,
+	      SIZEOF((*qtblptr)->quantval));
+      (*qtblptr)->sent_table = FALSE;
+    }
+  }
+  /* Copy the source's per-component info.
+   * Note we assume jpeg_set_defaults has allocated the dest comp_info array.
+   */
+  dstinfo->num_components = srcinfo->num_components;
+  if (dstinfo->num_components < 1 || dstinfo->num_components > MAX_COMPONENTS)
+    ERREXIT2(dstinfo, JERR_COMPONENT_COUNT, dstinfo->num_components,
+	     MAX_COMPONENTS);
+  for (ci = 0, incomp = srcinfo->comp_info, outcomp = dstinfo->comp_info;
+       ci < dstinfo->num_components; ci++, incomp++, outcomp++) {
+    outcomp->component_id = incomp->component_id;
+    outcomp->h_samp_factor = incomp->h_samp_factor;
+    outcomp->v_samp_factor = incomp->v_samp_factor;
+    outcomp->quant_tbl_no = incomp->quant_tbl_no;
+    /* Make sure saved quantization table for component matches the qtable
+     * slot.  If not, the input file re-used this qtable slot.
+     * IJG encoder currently cannot duplicate this.
+     */
+    tblno = outcomp->quant_tbl_no;
+    if (tblno < 0 || tblno >= NUM_QUANT_TBLS ||
+	srcinfo->quant_tbl_ptrs[tblno] == NULL)
+      ERREXIT1(dstinfo, JERR_NO_QUANT_TABLE, tblno);
+    slot_quant = srcinfo->quant_tbl_ptrs[tblno];
+    c_quant = incomp->quant_table;
+    if (c_quant != NULL) {
+      for (coefi = 0; coefi < DCTSIZE2; coefi++) {
+	if (c_quant->quantval[coefi] != slot_quant->quantval[coefi])
+	  ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno);
+      }
+    }
+    /* Note: we do not copy the source's Huffman table assignments;
+     * instead we rely on jpeg_set_colorspace to have made a suitable choice.
+     */
+  }
+  /* Also copy JFIF version and resolution information, if available.
+   * Strictly speaking this isn't "critical" info, but it's nearly
+   * always appropriate to copy it if available.  In particular,
+   * if the application chooses to copy JFIF 1.02 extension markers from
+   * the source file, we need to copy the version to make sure we don't
+   * emit a file that has 1.02 extensions but a claimed version of 1.01.
+   * We will *not*, however, copy version info from mislabeled "2.01" files.
+   */
+  if (srcinfo->saw_JFIF_marker) {
+    if (srcinfo->JFIF_major_version == 1) {
+      dstinfo->JFIF_major_version = srcinfo->JFIF_major_version;
+      dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version;
+    }
+    dstinfo->density_unit = srcinfo->density_unit;
+    dstinfo->X_density = srcinfo->X_density;
+    dstinfo->Y_density = srcinfo->Y_density;
+  }
+}
+
+
+/*
+ * Master selection of compression modules for transcoding.
+ * This substitutes for jcinit.c's initialization of the full compressor.
+ */
+
+LOCAL(void)
+transencode_master_selection (j_compress_ptr cinfo,
+			      jvirt_barray_ptr * coef_arrays)
+{
+  /* Initialize master control (includes parameter checking/processing) */
+  jinit_c_master_control(cinfo, TRUE /* transcode only */);
+
+  /* Entropy encoding: either Huffman or arithmetic coding. */
+  if (cinfo->arith_code)
+    jinit_arith_encoder(cinfo);
+  else {
+    jinit_huff_encoder(cinfo);
+  }
+
+  /* We need a special coefficient buffer controller. */
+  transencode_coef_controller(cinfo, coef_arrays);
+
+  jinit_marker_writer(cinfo);
+
+  /* We can now tell the memory manager to allocate virtual arrays. */
+  (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
+
+  /* Write the datastream header (SOI, JFIF) immediately.
+   * Frame and scan headers are postponed till later.
+   * This lets application insert special markers after the SOI.
+   */
+  (*cinfo->marker->write_file_header) (cinfo);
+}
+
+
+/*
+ * The rest of this file is a special implementation of the coefficient
+ * buffer controller.  This is similar to jccoefct.c, but it handles only
+ * output from presupplied virtual arrays.  Furthermore, we generate any
+ * dummy padding blocks on-the-fly rather than expecting them to be present
+ * in the arrays.
+ */
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_c_coef_controller pub; /* public fields */
+
+  JDIMENSION iMCU_row_num;	/* iMCU row # within image */
+  JDIMENSION mcu_ctr;		/* counts MCUs processed in current row */
+  int MCU_vert_offset;		/* counts MCU rows within iMCU row */
+  int MCU_rows_per_iMCU_row;	/* number of such rows needed */
+
+  /* Virtual block array for each component. */
+  jvirt_barray_ptr * whole_image;
+
+  /* Workspace for constructing dummy blocks at right/bottom edges. */
+  JBLOCKROW dummy_buffer[C_MAX_BLOCKS_IN_MCU];
+} my_coef_controller;
+
+typedef my_coef_controller * my_coef_ptr;
+
+
+LOCAL(void)
+start_iMCU_row (j_compress_ptr cinfo)
+/* Reset within-iMCU-row counters for a new row */
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+
+  /* In an interleaved scan, an MCU row is the same as an iMCU row.
+   * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
+   * But at the bottom of the image, process only what's left.
+   */
+  if (cinfo->comps_in_scan > 1) {
+    coef->MCU_rows_per_iMCU_row = 1;
+  } else {
+    if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1))
+      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
+    else
+      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
+  }
+
+  coef->mcu_ctr = 0;
+  coef->MCU_vert_offset = 0;
+}
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF(void)
+start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+
+  if (pass_mode != JBUF_CRANK_DEST)
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+
+  coef->iMCU_row_num = 0;
+  start_iMCU_row(cinfo);
+}
+
+
+/*
+ * Process some data.
+ * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
+ * per call, ie, v_samp_factor block rows for each component in the scan.
+ * The data is obtained from the virtual arrays and fed to the entropy coder.
+ * Returns TRUE if the iMCU row is completed, FALSE if suspended.
+ *
+ * NB: input_buf is ignored; it is likely to be a NULL pointer.
+ */
+
+METHODDEF(boolean)
+compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION MCU_col_num;	/* index of current MCU within row */
+  JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  int blkn, ci, xindex, yindex, yoffset, blockcnt;
+  JDIMENSION start_col;
+  JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
+  JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU];
+  JBLOCKROW buffer_ptr;
+  jpeg_component_info *compptr;
+
+  /* Align the virtual buffers for the components used in this scan. */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    buffer[ci] = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
+       coef->iMCU_row_num * compptr->v_samp_factor,
+       (JDIMENSION) compptr->v_samp_factor, FALSE);
+  }
+
+  /* Loop to process one whole iMCU row */
+  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
+       yoffset++) {
+    for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row;
+	 MCU_col_num++) {
+      /* Construct list of pointers to DCT blocks belonging to this MCU */
+      blkn = 0;			/* index of current DCT block within MCU */
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+	compptr = cinfo->cur_comp_info[ci];
+	start_col = MCU_col_num * compptr->MCU_width;
+	blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
+						: compptr->last_col_width;
+	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+	  if (coef->iMCU_row_num < last_iMCU_row ||
+	      yindex+yoffset < compptr->last_row_height) {
+	    /* Fill in pointers to real blocks in this row */
+	    buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
+	    for (xindex = 0; xindex < blockcnt; xindex++)
+	      MCU_buffer[blkn++] = buffer_ptr++;
+	  } else {
+	    /* At bottom of image, need a whole row of dummy blocks */
+	    xindex = 0;
+	  }
+	  /* Fill in any dummy blocks needed in this row.
+	   * Dummy blocks are filled in the same way as in jccoefct.c:
+	   * all zeroes in the AC entries, DC entries equal to previous
+	   * block's DC value.  The init routine has already zeroed the
+	   * AC entries, so we need only set the DC entries correctly.
+	   */
+	  for (; xindex < compptr->MCU_width; xindex++) {
+	    MCU_buffer[blkn] = coef->dummy_buffer[blkn];
+	    MCU_buffer[blkn][0][0] = MCU_buffer[blkn-1][0][0];
+	    blkn++;
+	  }
+	}
+      }
+      /* Try to write the MCU. */
+      if (! (*cinfo->entropy->encode_mcu) (cinfo, MCU_buffer)) {
+	/* Suspension forced; update state counters and exit */
+	coef->MCU_vert_offset = yoffset;
+	coef->mcu_ctr = MCU_col_num;
+	return FALSE;
+      }
+    }
+    /* Completed an MCU row, but perhaps not an iMCU row */
+    coef->mcu_ctr = 0;
+  }
+  /* Completed the iMCU row, advance counters for next one */
+  coef->iMCU_row_num++;
+  start_iMCU_row(cinfo);
+  return TRUE;
+}
+
+
+/*
+ * Initialize coefficient buffer controller.
+ *
+ * Each passed coefficient array must be the right size for that
+ * coefficient: width_in_blocks wide and height_in_blocks high,
+ * with unitheight at least v_samp_factor.
+ */
+
+LOCAL(void)
+transencode_coef_controller (j_compress_ptr cinfo,
+			     jvirt_barray_ptr * coef_arrays)
+{
+  my_coef_ptr coef;
+  JBLOCKROW buffer;
+  int i;
+
+  coef = (my_coef_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_coef_controller));
+  cinfo->coef = (struct jpeg_c_coef_controller *) coef;
+  coef->pub.start_pass = start_pass_coef;
+  coef->pub.compress_data = compress_output;
+
+  /* Save pointer to virtual arrays */
+  coef->whole_image = coef_arrays;
+
+  /* Allocate and pre-zero space for dummy DCT blocks. */
+  buffer = (JBLOCKROW)
+    (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
+  FMEMZERO((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
+  for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) {
+    coef->dummy_buffer[i] = buffer + i;
+  }
+}
diff --git a/jpeg-8d/jdapimin.c b/jpeg-8d/jdapimin.c
new file mode 100644
index 0000000..7f1ce4c
--- /dev/null
+++ b/jpeg-8d/jdapimin.c
@@ -0,0 +1,396 @@
+/*
+ * jdapimin.c
+ *
+ * Copyright (C) 1994-1998, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains application interface code for the decompression half
+ * of the JPEG library.  These are the "minimum" API routines that may be
+ * needed in either the normal full-decompression case or the
+ * transcoding-only case.
+ *
+ * Most of the routines intended to be called directly by an application
+ * are in this file or in jdapistd.c.  But also see jcomapi.c for routines
+ * shared by compression and decompression, and jdtrans.c for the transcoding
+ * case.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * Initialization of a JPEG decompression object.
+ * The error manager must already be set up (in case memory manager fails).
+ */
+
+GLOBAL(void)
+jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize)
+{
+  int i;
+
+  /* Guard against version mismatches between library and caller. */
+  cinfo->mem = NULL;		/* so jpeg_destroy knows mem mgr not called */
+  if (version != JPEG_LIB_VERSION)
+    ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version);
+  if (structsize != SIZEOF(struct jpeg_decompress_struct))
+    ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, 
+	     (int) SIZEOF(struct jpeg_decompress_struct), (int) structsize);
+
+  /* For debugging purposes, we zero the whole master structure.
+   * But the application has already set the err pointer, and may have set
+   * client_data, so we have to save and restore those fields.
+   * Note: if application hasn't set client_data, tools like Purify may
+   * complain here.
+   */
+  {
+    struct jpeg_error_mgr * err = cinfo->err;
+    void * client_data = cinfo->client_data; /* ignore Purify complaint here */
+    MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct));
+    cinfo->err = err;
+    cinfo->client_data = client_data;
+  }
+  cinfo->is_decompressor = TRUE;
+
+  /* Initialize a memory manager instance for this object */
+  jinit_memory_mgr((j_common_ptr) cinfo);
+
+  /* Zero out pointers to permanent structures. */
+  cinfo->progress = NULL;
+  cinfo->src = NULL;
+
+  for (i = 0; i < NUM_QUANT_TBLS; i++)
+    cinfo->quant_tbl_ptrs[i] = NULL;
+
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    cinfo->dc_huff_tbl_ptrs[i] = NULL;
+    cinfo->ac_huff_tbl_ptrs[i] = NULL;
+  }
+
+  /* Initialize marker processor so application can override methods
+   * for COM, APPn markers before calling jpeg_read_header.
+   */
+  cinfo->marker_list = NULL;
+  jinit_marker_reader(cinfo);
+
+  /* And initialize the overall input controller. */
+  jinit_input_controller(cinfo);
+
+  /* OK, I'm ready */
+  cinfo->global_state = DSTATE_START;
+}
+
+
+/*
+ * Destruction of a JPEG decompression object
+ */
+
+GLOBAL(void)
+jpeg_destroy_decompress (j_decompress_ptr cinfo)
+{
+  jpeg_destroy((j_common_ptr) cinfo); /* use common routine */
+}
+
+
+/*
+ * Abort processing of a JPEG decompression operation,
+ * but don't destroy the object itself.
+ */
+
+GLOBAL(void)
+jpeg_abort_decompress (j_decompress_ptr cinfo)
+{
+  jpeg_abort((j_common_ptr) cinfo); /* use common routine */
+}
+
+
+/*
+ * Set default decompression parameters.
+ */
+
+LOCAL(void)
+default_decompress_parms (j_decompress_ptr cinfo)
+{
+  /* Guess the input colorspace, and set output colorspace accordingly. */
+  /* (Wish JPEG committee had provided a real way to specify this...) */
+  /* Note application may override our guesses. */
+  switch (cinfo->num_components) {
+  case 1:
+    cinfo->jpeg_color_space = JCS_GRAYSCALE;
+    cinfo->out_color_space = JCS_GRAYSCALE;
+    break;
+    
+  case 3:
+    if (cinfo->saw_JFIF_marker) {
+      cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */
+    } else if (cinfo->saw_Adobe_marker) {
+      switch (cinfo->Adobe_transform) {
+      case 0:
+	cinfo->jpeg_color_space = JCS_RGB;
+	break;
+      case 1:
+	cinfo->jpeg_color_space = JCS_YCbCr;
+	break;
+      default:
+	WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
+	cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
+	break;
+      }
+    } else {
+      /* Saw no special markers, try to guess from the component IDs */
+      int cid0 = cinfo->comp_info[0].component_id;
+      int cid1 = cinfo->comp_info[1].component_id;
+      int cid2 = cinfo->comp_info[2].component_id;
+
+      if (cid0 == 1 && cid1 == 2 && cid2 == 3)
+	cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */
+      else if (cid0 == 82 && cid1 == 71 && cid2 == 66)
+	cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */
+      else {
+	TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2);
+	cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
+      }
+    }
+    /* Always guess RGB is proper output colorspace. */
+    cinfo->out_color_space = JCS_RGB;
+    break;
+    
+  case 4:
+    if (cinfo->saw_Adobe_marker) {
+      switch (cinfo->Adobe_transform) {
+      case 0:
+	cinfo->jpeg_color_space = JCS_CMYK;
+	break;
+      case 2:
+	cinfo->jpeg_color_space = JCS_YCCK;
+	break;
+      default:
+	WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
+	cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */
+	break;
+      }
+    } else {
+      /* No special markers, assume straight CMYK. */
+      cinfo->jpeg_color_space = JCS_CMYK;
+    }
+    cinfo->out_color_space = JCS_CMYK;
+    break;
+    
+  default:
+    cinfo->jpeg_color_space = JCS_UNKNOWN;
+    cinfo->out_color_space = JCS_UNKNOWN;
+    break;
+  }
+
+  /* Set defaults for other decompression parameters. */
+  cinfo->scale_num = cinfo->block_size;		/* 1:1 scaling */
+  cinfo->scale_denom = cinfo->block_size;
+  cinfo->output_gamma = 1.0;
+  cinfo->buffered_image = FALSE;
+  cinfo->raw_data_out = FALSE;
+  cinfo->dct_method = JDCT_DEFAULT;
+  cinfo->do_fancy_upsampling = TRUE;
+  cinfo->do_block_smoothing = TRUE;
+  cinfo->quantize_colors = FALSE;
+  /* We set these in case application only sets quantize_colors. */
+  cinfo->dither_mode = JDITHER_FS;
+#ifdef QUANT_2PASS_SUPPORTED
+  cinfo->two_pass_quantize = TRUE;
+#else
+  cinfo->two_pass_quantize = FALSE;
+#endif
+  cinfo->desired_number_of_colors = 256;
+  cinfo->colormap = NULL;
+  /* Initialize for no mode change in buffered-image mode. */
+  cinfo->enable_1pass_quant = FALSE;
+  cinfo->enable_external_quant = FALSE;
+  cinfo->enable_2pass_quant = FALSE;
+}
+
+
+/*
+ * Decompression startup: read start of JPEG datastream to see what's there.
+ * Need only initialize JPEG object and supply a data source before calling.
+ *
+ * This routine will read as far as the first SOS marker (ie, actual start of
+ * compressed data), and will save all tables and parameters in the JPEG
+ * object.  It will also initialize the decompression parameters to default
+ * values, and finally return JPEG_HEADER_OK.  On return, the application may
+ * adjust the decompression parameters and then call jpeg_start_decompress.
+ * (Or, if the application only wanted to determine the image parameters,
+ * the data need not be decompressed.  In that case, call jpeg_abort or
+ * jpeg_destroy to release any temporary space.)
+ * If an abbreviated (tables only) datastream is presented, the routine will
+ * return JPEG_HEADER_TABLES_ONLY upon reaching EOI.  The application may then
+ * re-use the JPEG object to read the abbreviated image datastream(s).
+ * It is unnecessary (but OK) to call jpeg_abort in this case.
+ * The JPEG_SUSPENDED return code only occurs if the data source module
+ * requests suspension of the decompressor.  In this case the application
+ * should load more source data and then re-call jpeg_read_header to resume
+ * processing.
+ * If a non-suspending data source is used and require_image is TRUE, then the
+ * return code need not be inspected since only JPEG_HEADER_OK is possible.
+ *
+ * This routine is now just a front end to jpeg_consume_input, with some
+ * extra error checking.
+ */
+
+GLOBAL(int)
+jpeg_read_header (j_decompress_ptr cinfo, boolean require_image)
+{
+  int retcode;
+
+  if (cinfo->global_state != DSTATE_START &&
+      cinfo->global_state != DSTATE_INHEADER)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  retcode = jpeg_consume_input(cinfo);
+
+  switch (retcode) {
+  case JPEG_REACHED_SOS:
+    retcode = JPEG_HEADER_OK;
+    break;
+  case JPEG_REACHED_EOI:
+    if (require_image)		/* Complain if application wanted an image */
+      ERREXIT(cinfo, JERR_NO_IMAGE);
+    /* Reset to start state; it would be safer to require the application to
+     * call jpeg_abort, but we can't change it now for compatibility reasons.
+     * A side effect is to free any temporary memory (there shouldn't be any).
+     */
+    jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */
+    retcode = JPEG_HEADER_TABLES_ONLY;
+    break;
+  case JPEG_SUSPENDED:
+    /* no work */
+    break;
+  }
+
+  return retcode;
+}
+
+
+/*
+ * Consume data in advance of what the decompressor requires.
+ * This can be called at any time once the decompressor object has
+ * been created and a data source has been set up.
+ *
+ * This routine is essentially a state machine that handles a couple
+ * of critical state-transition actions, namely initial setup and
+ * transition from header scanning to ready-for-start_decompress.
+ * All the actual input is done via the input controller's consume_input
+ * method.
+ */
+
+GLOBAL(int)
+jpeg_consume_input (j_decompress_ptr cinfo)
+{
+  int retcode = JPEG_SUSPENDED;
+
+  /* NB: every possible DSTATE value should be listed in this switch */
+  switch (cinfo->global_state) {
+  case DSTATE_START:
+    /* Start-of-datastream actions: reset appropriate modules */
+    (*cinfo->inputctl->reset_input_controller) (cinfo);
+    /* Initialize application's data source module */
+    (*cinfo->src->init_source) (cinfo);
+    cinfo->global_state = DSTATE_INHEADER;
+    /*FALLTHROUGH*/
+  case DSTATE_INHEADER:
+    retcode = (*cinfo->inputctl->consume_input) (cinfo);
+    if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */
+      /* Set up default parameters based on header data */
+      default_decompress_parms(cinfo);
+      /* Set global state: ready for start_decompress */
+      cinfo->global_state = DSTATE_READY;
+    }
+    break;
+  case DSTATE_READY:
+    /* Can't advance past first SOS until start_decompress is called */
+    retcode = JPEG_REACHED_SOS;
+    break;
+  case DSTATE_PRELOAD:
+  case DSTATE_PRESCAN:
+  case DSTATE_SCANNING:
+  case DSTATE_RAW_OK:
+  case DSTATE_BUFIMAGE:
+  case DSTATE_BUFPOST:
+  case DSTATE_STOPPING:
+    retcode = (*cinfo->inputctl->consume_input) (cinfo);
+    break;
+  default:
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  }
+  return retcode;
+}
+
+
+/*
+ * Have we finished reading the input file?
+ */
+
+GLOBAL(boolean)
+jpeg_input_complete (j_decompress_ptr cinfo)
+{
+  /* Check for valid jpeg object */
+  if (cinfo->global_state < DSTATE_START ||
+      cinfo->global_state > DSTATE_STOPPING)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  return cinfo->inputctl->eoi_reached;
+}
+
+
+/*
+ * Is there more than one scan?
+ */
+
+GLOBAL(boolean)
+jpeg_has_multiple_scans (j_decompress_ptr cinfo)
+{
+  /* Only valid after jpeg_read_header completes */
+  if (cinfo->global_state < DSTATE_READY ||
+      cinfo->global_state > DSTATE_STOPPING)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  return cinfo->inputctl->has_multiple_scans;
+}
+
+
+/*
+ * Finish JPEG decompression.
+ *
+ * This will normally just verify the file trailer and release temp storage.
+ *
+ * Returns FALSE if suspended.  The return value need be inspected only if
+ * a suspending data source is used.
+ */
+
+GLOBAL(boolean)
+jpeg_finish_decompress (j_decompress_ptr cinfo)
+{
+  if ((cinfo->global_state == DSTATE_SCANNING ||
+       cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) {
+    /* Terminate final pass of non-buffered mode */
+    if (cinfo->output_scanline < cinfo->output_height)
+      ERREXIT(cinfo, JERR_TOO_LITTLE_DATA);
+    (*cinfo->master->finish_output_pass) (cinfo);
+    cinfo->global_state = DSTATE_STOPPING;
+  } else if (cinfo->global_state == DSTATE_BUFIMAGE) {
+    /* Finishing after a buffered-image operation */
+    cinfo->global_state = DSTATE_STOPPING;
+  } else if (cinfo->global_state != DSTATE_STOPPING) {
+    /* STOPPING = repeat call after a suspension, anything else is error */
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  }
+  /* Read until EOI */
+  while (! cinfo->inputctl->eoi_reached) {
+    if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED)
+      return FALSE;		/* Suspend, come back later */
+  }
+  /* Do final cleanup */
+  (*cinfo->src->term_source) (cinfo);
+  /* We can use jpeg_abort to release memory and reset global_state */
+  jpeg_abort((j_common_ptr) cinfo);
+  return TRUE;
+}
diff --git a/jpeg-8d/jdapistd.c b/jpeg-8d/jdapistd.c
new file mode 100644
index 0000000..9d74537
--- /dev/null
+++ b/jpeg-8d/jdapistd.c
@@ -0,0 +1,275 @@
+/*
+ * jdapistd.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains application interface code for the decompression half
+ * of the JPEG library.  These are the "standard" API routines that are
+ * used in the normal full-decompression case.  They are not used by a
+ * transcoding-only application.  Note that if an application links in
+ * jpeg_start_decompress, it will end up linking in the entire decompressor.
+ * We thus must separate this file from jdapimin.c to avoid linking the
+ * whole decompression library into a transcoder.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Forward declarations */
+LOCAL(boolean) output_pass_setup JPP((j_decompress_ptr cinfo));
+
+
+/*
+ * Decompression initialization.
+ * jpeg_read_header must be completed before calling this.
+ *
+ * If a multipass operating mode was selected, this will do all but the
+ * last pass, and thus may take a great deal of time.
+ *
+ * Returns FALSE if suspended.  The return value need be inspected only if
+ * a suspending data source is used.
+ */
+
+GLOBAL(boolean)
+jpeg_start_decompress (j_decompress_ptr cinfo)
+{
+  if (cinfo->global_state == DSTATE_READY) {
+    /* First call: initialize master control, select active modules */
+    jinit_master_decompress(cinfo);
+    if (cinfo->buffered_image) {
+      /* No more work here; expecting jpeg_start_output next */
+      cinfo->global_state = DSTATE_BUFIMAGE;
+      return TRUE;
+    }
+    cinfo->global_state = DSTATE_PRELOAD;
+  }
+  if (cinfo->global_state == DSTATE_PRELOAD) {
+    /* If file has multiple scans, absorb them all into the coef buffer */
+    if (cinfo->inputctl->has_multiple_scans) {
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+      for (;;) {
+	int retcode;
+	/* Call progress monitor hook if present */
+	if (cinfo->progress != NULL)
+	  (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+	/* Absorb some more input */
+	retcode = (*cinfo->inputctl->consume_input) (cinfo);
+	if (retcode == JPEG_SUSPENDED)
+	  return FALSE;
+	if (retcode == JPEG_REACHED_EOI)
+	  break;
+	/* Advance progress counter if appropriate */
+	if (cinfo->progress != NULL &&
+	    (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
+	  if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
+	    /* jdmaster underestimated number of scans; ratchet up one scan */
+	    cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
+	  }
+	}
+      }
+#else
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif /* D_MULTISCAN_FILES_SUPPORTED */
+    }
+    cinfo->output_scan_number = cinfo->input_scan_number;
+  } else if (cinfo->global_state != DSTATE_PRESCAN)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  /* Perform any dummy output passes, and set up for the final pass */
+  return output_pass_setup(cinfo);
+}
+
+
+/*
+ * Set up for an output pass, and perform any dummy pass(es) needed.
+ * Common subroutine for jpeg_start_decompress and jpeg_start_output.
+ * Entry: global_state = DSTATE_PRESCAN only if previously suspended.
+ * Exit: If done, returns TRUE and sets global_state for proper output mode.
+ *       If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN.
+ */
+
+LOCAL(boolean)
+output_pass_setup (j_decompress_ptr cinfo)
+{
+  if (cinfo->global_state != DSTATE_PRESCAN) {
+    /* First call: do pass setup */
+    (*cinfo->master->prepare_for_output_pass) (cinfo);
+    cinfo->output_scanline = 0;
+    cinfo->global_state = DSTATE_PRESCAN;
+  }
+  /* Loop over any required dummy passes */
+  while (cinfo->master->is_dummy_pass) {
+#ifdef QUANT_2PASS_SUPPORTED
+    /* Crank through the dummy pass */
+    while (cinfo->output_scanline < cinfo->output_height) {
+      JDIMENSION last_scanline;
+      /* Call progress monitor hook if present */
+      if (cinfo->progress != NULL) {
+	cinfo->progress->pass_counter = (long) cinfo->output_scanline;
+	cinfo->progress->pass_limit = (long) cinfo->output_height;
+	(*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+      }
+      /* Process some data */
+      last_scanline = cinfo->output_scanline;
+      (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL,
+				    &cinfo->output_scanline, (JDIMENSION) 0);
+      if (cinfo->output_scanline == last_scanline)
+	return FALSE;		/* No progress made, must suspend */
+    }
+    /* Finish up dummy pass, and set up for another one */
+    (*cinfo->master->finish_output_pass) (cinfo);
+    (*cinfo->master->prepare_for_output_pass) (cinfo);
+    cinfo->output_scanline = 0;
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif /* QUANT_2PASS_SUPPORTED */
+  }
+  /* Ready for application to drive output pass through
+   * jpeg_read_scanlines or jpeg_read_raw_data.
+   */
+  cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING;
+  return TRUE;
+}
+
+
+/*
+ * Read some scanlines of data from the JPEG decompressor.
+ *
+ * The return value will be the number of lines actually read.
+ * This may be less than the number requested in several cases,
+ * including bottom of image, data source suspension, and operating
+ * modes that emit multiple scanlines at a time.
+ *
+ * Note: we warn about excess calls to jpeg_read_scanlines() since
+ * this likely signals an application programmer error.  However,
+ * an oversize buffer (max_lines > scanlines remaining) is not an error.
+ */
+
+GLOBAL(JDIMENSION)
+jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines,
+		     JDIMENSION max_lines)
+{
+  JDIMENSION row_ctr;
+
+  if (cinfo->global_state != DSTATE_SCANNING)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  if (cinfo->output_scanline >= cinfo->output_height) {
+    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
+    return 0;
+  }
+
+  /* Call progress monitor hook if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->pass_counter = (long) cinfo->output_scanline;
+    cinfo->progress->pass_limit = (long) cinfo->output_height;
+    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+  }
+
+  /* Process some data */
+  row_ctr = 0;
+  (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines);
+  cinfo->output_scanline += row_ctr;
+  return row_ctr;
+}
+
+
+/*
+ * Alternate entry point to read raw data.
+ * Processes exactly one iMCU row per call, unless suspended.
+ */
+
+GLOBAL(JDIMENSION)
+jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data,
+		    JDIMENSION max_lines)
+{
+  JDIMENSION lines_per_iMCU_row;
+
+  if (cinfo->global_state != DSTATE_RAW_OK)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  if (cinfo->output_scanline >= cinfo->output_height) {
+    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
+    return 0;
+  }
+
+  /* Call progress monitor hook if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->pass_counter = (long) cinfo->output_scanline;
+    cinfo->progress->pass_limit = (long) cinfo->output_height;
+    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+  }
+
+  /* Verify that at least one iMCU row can be returned. */
+  lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size;
+  if (max_lines < lines_per_iMCU_row)
+    ERREXIT(cinfo, JERR_BUFFER_SIZE);
+
+  /* Decompress directly into user's buffer. */
+  if (! (*cinfo->coef->decompress_data) (cinfo, data))
+    return 0;			/* suspension forced, can do nothing more */
+
+  /* OK, we processed one iMCU row. */
+  cinfo->output_scanline += lines_per_iMCU_row;
+  return lines_per_iMCU_row;
+}
+
+
+/* Additional entry points for buffered-image mode. */
+
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+
+/*
+ * Initialize for an output pass in buffered-image mode.
+ */
+
+GLOBAL(boolean)
+jpeg_start_output (j_decompress_ptr cinfo, int scan_number)
+{
+  if (cinfo->global_state != DSTATE_BUFIMAGE &&
+      cinfo->global_state != DSTATE_PRESCAN)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  /* Limit scan number to valid range */
+  if (scan_number <= 0)
+    scan_number = 1;
+  if (cinfo->inputctl->eoi_reached &&
+      scan_number > cinfo->input_scan_number)
+    scan_number = cinfo->input_scan_number;
+  cinfo->output_scan_number = scan_number;
+  /* Perform any dummy output passes, and set up for the real pass */
+  return output_pass_setup(cinfo);
+}
+
+
+/*
+ * Finish up after an output pass in buffered-image mode.
+ *
+ * Returns FALSE if suspended.  The return value need be inspected only if
+ * a suspending data source is used.
+ */
+
+GLOBAL(boolean)
+jpeg_finish_output (j_decompress_ptr cinfo)
+{
+  if ((cinfo->global_state == DSTATE_SCANNING ||
+       cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) {
+    /* Terminate this pass. */
+    /* We do not require the whole pass to have been completed. */
+    (*cinfo->master->finish_output_pass) (cinfo);
+    cinfo->global_state = DSTATE_BUFPOST;
+  } else if (cinfo->global_state != DSTATE_BUFPOST) {
+    /* BUFPOST = repeat call after a suspension, anything else is error */
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  }
+  /* Read markers looking for SOS or EOI */
+  while (cinfo->input_scan_number <= cinfo->output_scan_number &&
+	 ! cinfo->inputctl->eoi_reached) {
+    if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED)
+      return FALSE;		/* Suspend, come back later */
+  }
+  cinfo->global_state = DSTATE_BUFIMAGE;
+  return TRUE;
+}
+
+#endif /* D_MULTISCAN_FILES_SUPPORTED */
diff --git a/jpeg-8d/jdarith.c b/jpeg-8d/jdarith.c
new file mode 100644
index 0000000..092f8af
--- /dev/null
+++ b/jpeg-8d/jdarith.c
@@ -0,0 +1,776 @@
+/*
+ * jdarith.c
+ *
+ * Developed 1997-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains portable arithmetic entropy decoding routines for JPEG
+ * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81).
+ *
+ * Both sequential and progressive modes are supported in this single module.
+ *
+ * Suspension is not currently supported in this module.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Expanded entropy decoder object for arithmetic decoding. */
+
+typedef struct {
+  struct jpeg_entropy_decoder pub; /* public fields */
+
+  INT32 c;       /* C register, base of coding interval + input bit buffer */
+  INT32 a;               /* A register, normalized size of coding interval */
+  int ct;     /* bit shift counter, # of bits left in bit buffer part of C */
+                                                         /* init: ct = -16 */
+                                                         /* run: ct = 0..7 */
+                                                         /* error: ct = -1 */
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+  int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */
+
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+
+  /* Pointers to statistics areas (these workspaces have image lifespan) */
+  unsigned char * dc_stats[NUM_ARITH_TBLS];
+  unsigned char * ac_stats[NUM_ARITH_TBLS];
+
+  /* Statistics bin for coding with fixed probability 0.5 */
+  unsigned char fixed_bin[4];
+} arith_entropy_decoder;
+
+typedef arith_entropy_decoder * arith_entropy_ptr;
+
+/* The following two definitions specify the allocation chunk size
+ * for the statistics area.
+ * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least
+ * 49 statistics bins for DC, and 245 statistics bins for AC coding.
+ *
+ * We use a compact representation with 1 byte per statistics bin,
+ * thus the numbers directly represent byte sizes.
+ * This 1 byte per statistics bin contains the meaning of the MPS
+ * (more probable symbol) in the highest bit (mask 0x80), and the
+ * index into the probability estimation state machine table
+ * in the lower bits (mask 0x7F).
+ */
+
+#define DC_STAT_BINS 64
+#define AC_STAT_BINS 256
+
+
+LOCAL(int)
+get_byte (j_decompress_ptr cinfo)
+/* Read next input byte; we do not support suspension in this module. */
+{
+  struct jpeg_source_mgr * src = cinfo->src;
+
+  if (src->bytes_in_buffer == 0)
+    if (! (*src->fill_input_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+  src->bytes_in_buffer--;
+  return GETJOCTET(*src->next_input_byte++);
+}
+
+
+/*
+ * The core arithmetic decoding routine (common in JPEG and JBIG).
+ * This needs to go as fast as possible.
+ * Machine-dependent optimization facilities
+ * are not utilized in this portable implementation.
+ * However, this code should be fairly efficient and
+ * may be a good base for further optimizations anyway.
+ *
+ * Return value is 0 or 1 (binary decision).
+ *
+ * Note: I've changed the handling of the code base & bit
+ * buffer register C compared to other implementations
+ * based on the standards layout & procedures.
+ * While it also contains both the actual base of the
+ * coding interval (16 bits) and the next-bits buffer,
+ * the cut-point between these two parts is floating
+ * (instead of fixed) with the bit shift counter CT.
+ * Thus, we also need only one (variable instead of
+ * fixed size) shift for the LPS/MPS decision, and
+ * we can get away with any renormalization update
+ * of C (except for new data insertion, of course).
+ *
+ * I've also introduced a new scheme for accessing
+ * the probability estimation state machine table,
+ * derived from Markus Kuhn's JBIG implementation.
+ */
+
+LOCAL(int)
+arith_decode (j_decompress_ptr cinfo, unsigned char *st)
+{
+  register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy;
+  register unsigned char nl, nm;
+  register INT32 qe, temp;
+  register int sv, data;
+
+  /* Renormalization & data input per section D.2.6 */
+  while (e->a < 0x8000L) {
+    if (--e->ct < 0) {
+      /* Need to fetch next data byte */
+      if (cinfo->unread_marker)
+	data = 0;		/* stuff zero data */
+      else {
+	data = get_byte(cinfo);	/* read next input byte */
+	if (data == 0xFF) {	/* zero stuff or marker code */
+	  do data = get_byte(cinfo);
+	  while (data == 0xFF);	/* swallow extra 0xFF bytes */
+	  if (data == 0)
+	    data = 0xFF;	/* discard stuffed zero byte */
+	  else {
+	    /* Note: Different from the Huffman decoder, hitting
+	     * a marker while processing the compressed data
+	     * segment is legal in arithmetic coding.
+	     * The convention is to supply zero data
+	     * then until decoding is complete.
+	     */
+	    cinfo->unread_marker = data;
+	    data = 0;
+	  }
+	}
+      }
+      e->c = (e->c << 8) | data; /* insert data into C register */
+      if ((e->ct += 8) < 0)	 /* update bit shift counter */
+	/* Need more initial bytes */
+	if (++e->ct == 0)
+	  /* Got 2 initial bytes -> re-init A and exit loop */
+	  e->a = 0x8000L; /* => e->a = 0x10000L after loop exit */
+    }
+    e->a <<= 1;
+  }
+
+  /* Fetch values from our compact representation of Table D.3(D.2):
+   * Qe values and probability estimation state machine
+   */
+  sv = *st;
+  qe = jpeg_aritab[sv & 0x7F];	/* => Qe_Value */
+  nl = qe & 0xFF; qe >>= 8;	/* Next_Index_LPS + Switch_MPS */
+  nm = qe & 0xFF; qe >>= 8;	/* Next_Index_MPS */
+
+  /* Decode & estimation procedures per sections D.2.4 & D.2.5 */
+  temp = e->a - qe;
+  e->a = temp;
+  temp <<= e->ct;
+  if (e->c >= temp) {
+    e->c -= temp;
+    /* Conditional LPS (less probable symbol) exchange */
+    if (e->a < qe) {
+      e->a = qe;
+      *st = (sv & 0x80) ^ nm;	/* Estimate_after_MPS */
+    } else {
+      e->a = qe;
+      *st = (sv & 0x80) ^ nl;	/* Estimate_after_LPS */
+      sv ^= 0x80;		/* Exchange LPS/MPS */
+    }
+  } else if (e->a < 0x8000L) {
+    /* Conditional MPS (more probable symbol) exchange */
+    if (e->a < qe) {
+      *st = (sv & 0x80) ^ nl;	/* Estimate_after_LPS */
+      sv ^= 0x80;		/* Exchange LPS/MPS */
+    } else {
+      *st = (sv & 0x80) ^ nm;	/* Estimate_after_MPS */
+    }
+  }
+
+  return sv >> 7;
+}
+
+
+/*
+ * Check for a restart marker & resynchronize decoder.
+ */
+
+LOCAL(void)
+process_restart (j_decompress_ptr cinfo)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci;
+  jpeg_component_info * compptr;
+
+  /* Advance past the RSTn marker */
+  if (! (*cinfo->marker->read_restart_marker) (cinfo))
+    ERREXIT(cinfo, JERR_CANT_SUSPEND);
+
+  /* Re-initialize statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) {
+      MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS);
+      /* Reset DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    if ((! cinfo->progressive_mode && cinfo->lim_Se) ||
+	(cinfo->progressive_mode && cinfo->Ss)) {
+      MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS);
+    }
+  }
+
+  /* Reset arithmetic decoding variables */
+  entropy->c = 0;
+  entropy->a = 0;
+  entropy->ct = -16;	/* force reading 2 initial bytes to fill C */
+
+  /* Reset restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+}
+
+
+/*
+ * Arithmetic MCU decoding.
+ * Each of these routines decodes and returns one MCU's worth of
+ * arithmetic-compressed coefficients.
+ * The coefficients are reordered from zigzag order into natural array order,
+ * but are not dequantized.
+ *
+ * The i'th block of the MCU is stored into the block pointed to by
+ * MCU_data[i].  WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER.
+ */
+
+/*
+ * MCU decoding for DC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl, sign;
+  int v, m;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    tbl = cinfo->cur_comp_info[ci]->dc_tbl_no;
+
+    /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.19: Decode_DC_DIFF */
+    if (arith_decode(cinfo, st) == 0)
+      entropy->dc_context[ci] = 0;
+    else {
+      /* Figure F.21: Decoding nonzero value v */
+      /* Figure F.22: Decoding the sign of v */
+      sign = arith_decode(cinfo, st + 1);
+      st += 2; st += sign;
+      /* Figure F.23: Decoding the magnitude category of v */
+      if ((m = arith_decode(cinfo, st)) != 0) {
+	st = entropy->dc_stats[tbl] + 20;	/* Table F.4: X1 = 20 */
+	while (arith_decode(cinfo, st)) {
+	  if ((m <<= 1) == 0x8000) {
+	    WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	    entropy->ct = -1;			/* magnitude overflow */
+	    return TRUE;
+	  }
+	  st += 1;
+	}
+      }
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;		   /* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */
+      else
+	entropy->dc_context[ci] = 4 + (sign * 4);  /* small diff category */
+      v = m;
+      /* Figure F.24: Decoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	if (arith_decode(cinfo, st)) v |= m;
+      v += 1; if (sign) v = -v;
+      entropy->last_dc_val[ci] += v;
+    }
+
+    /* Scale and output the DC coefficient (assumes jpeg_natural_order[0]=0) */
+    (*block)[0] = (JCOEF) (entropy->last_dc_val[ci] << cinfo->Al);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for AC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, sign, k;
+  int v, m;
+  const int * natural_order;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  natural_order = cinfo->natural_order;
+
+  /* There is always only one block per MCU */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */
+
+  /* Figure F.20: Decode_AC_coefficients */
+  for (k = cinfo->Ss; k <= cinfo->Se; k++) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    if (arith_decode(cinfo, st)) break;		/* EOB flag */
+    while (arith_decode(cinfo, st + 1) == 0) {
+      st += 3; k++;
+      if (k > cinfo->Se) {
+	WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	entropy->ct = -1;			/* spectral overflow */
+	return TRUE;
+      }
+    }
+    /* Figure F.21: Decoding nonzero value v */
+    /* Figure F.22: Decoding the sign of v */
+    sign = arith_decode(cinfo, entropy->fixed_bin);
+    st += 2;
+    /* Figure F.23: Decoding the magnitude category of v */
+    if ((m = arith_decode(cinfo, st)) != 0) {
+      if (arith_decode(cinfo, st)) {
+	m <<= 1;
+	st = entropy->ac_stats[tbl] +
+	     (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	while (arith_decode(cinfo, st)) {
+	  if ((m <<= 1) == 0x8000) {
+	    WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	    entropy->ct = -1;			/* magnitude overflow */
+	    return TRUE;
+	  }
+	  st += 1;
+	}
+      }
+    }
+    v = m;
+    /* Figure F.24: Decoding the magnitude bit pattern of v */
+    st += 14;
+    while (m >>= 1)
+      if (arith_decode(cinfo, st)) v |= m;
+    v += 1; if (sign) v = -v;
+    /* Scale and output coefficient in natural (dezigzagged) order */
+    (*block)[natural_order[k]] = (JCOEF) (v << cinfo->Al);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for DC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  unsigned char *st;
+  int p1, blkn;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  st = entropy->fixed_bin;	/* use fixed probability estimation */
+  p1 = 1 << cinfo->Al;		/* 1 in the bit position being coded */
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    /* Encoded data is simply the next bit of the two's-complement DC value */
+    if (arith_decode(cinfo, st))
+      MCU_data[blkn][0][0] |= p1;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for AC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  JCOEFPTR thiscoef;
+  unsigned char *st;
+  int tbl, k, kex;
+  int p1, m1;
+  const int * natural_order;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  natural_order = cinfo->natural_order;
+
+  /* There is always only one block per MCU */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  p1 = 1 << cinfo->Al;		/* 1 in the bit position being coded */
+  m1 = (-1) << cinfo->Al;	/* -1 in the bit position being coded */
+
+  /* Establish EOBx (previous stage end-of-block) index */
+  for (kex = cinfo->Se; kex > 0; kex--)
+    if ((*block)[natural_order[kex]]) break;
+
+  for (k = cinfo->Ss; k <= cinfo->Se; k++) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    if (k > kex)
+      if (arith_decode(cinfo, st)) break;	/* EOB flag */
+    for (;;) {
+      thiscoef = *block + natural_order[k];
+      if (*thiscoef) {				/* previously nonzero coef */
+	if (arith_decode(cinfo, st + 2)) {
+	  if (*thiscoef < 0)
+	    *thiscoef += m1;
+	  else
+	    *thiscoef += p1;
+	}
+	break;
+      }
+      if (arith_decode(cinfo, st + 1)) {	/* newly nonzero coef */
+	if (arith_decode(cinfo, entropy->fixed_bin))
+	  *thiscoef = m1;
+	else
+	  *thiscoef = p1;
+	break;
+      }
+      st += 3; k++;
+      if (k > cinfo->Se) {
+	WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	entropy->ct = -1;			/* spectral overflow */
+	return TRUE;
+      }
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Decode one MCU's worth of arithmetic-compressed coefficients.
+ */
+
+METHODDEF(boolean)
+decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  jpeg_component_info * compptr;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl, sign, k;
+  int v, m;
+  const int * natural_order;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  natural_order = cinfo->natural_order;
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+
+    /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */
+
+    tbl = compptr->dc_tbl_no;
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.19: Decode_DC_DIFF */
+    if (arith_decode(cinfo, st) == 0)
+      entropy->dc_context[ci] = 0;
+    else {
+      /* Figure F.21: Decoding nonzero value v */
+      /* Figure F.22: Decoding the sign of v */
+      sign = arith_decode(cinfo, st + 1);
+      st += 2; st += sign;
+      /* Figure F.23: Decoding the magnitude category of v */
+      if ((m = arith_decode(cinfo, st)) != 0) {
+	st = entropy->dc_stats[tbl] + 20;	/* Table F.4: X1 = 20 */
+	while (arith_decode(cinfo, st)) {
+	  if ((m <<= 1) == 0x8000) {
+	    WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	    entropy->ct = -1;			/* magnitude overflow */
+	    return TRUE;
+	  }
+	  st += 1;
+	}
+      }
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;		   /* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */
+      else
+	entropy->dc_context[ci] = 4 + (sign * 4);  /* small diff category */
+      v = m;
+      /* Figure F.24: Decoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	if (arith_decode(cinfo, st)) v |= m;
+      v += 1; if (sign) v = -v;
+      entropy->last_dc_val[ci] += v;
+    }
+
+    (*block)[0] = (JCOEF) entropy->last_dc_val[ci];
+
+    /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */
+
+    if (cinfo->lim_Se == 0) continue;
+    tbl = compptr->ac_tbl_no;
+    k = 0;
+
+    /* Figure F.20: Decode_AC_coefficients */
+    do {
+      st = entropy->ac_stats[tbl] + 3 * k;
+      if (arith_decode(cinfo, st)) break;	/* EOB flag */
+      for (;;) {
+	k++;
+	if (arith_decode(cinfo, st + 1)) break;
+	st += 3;
+	if (k >= cinfo->lim_Se) {
+	  WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	  entropy->ct = -1;			/* spectral overflow */
+	  return TRUE;
+	}
+      }
+      /* Figure F.21: Decoding nonzero value v */
+      /* Figure F.22: Decoding the sign of v */
+      sign = arith_decode(cinfo, entropy->fixed_bin);
+      st += 2;
+      /* Figure F.23: Decoding the magnitude category of v */
+      if ((m = arith_decode(cinfo, st)) != 0) {
+	if (arith_decode(cinfo, st)) {
+	  m <<= 1;
+	  st = entropy->ac_stats[tbl] +
+	       (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	  while (arith_decode(cinfo, st)) {
+	    if ((m <<= 1) == 0x8000) {
+	      WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	      entropy->ct = -1;			/* magnitude overflow */
+	      return TRUE;
+	    }
+	    st += 1;
+	  }
+	}
+      }
+      v = m;
+      /* Figure F.24: Decoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	if (arith_decode(cinfo, st)) v |= m;
+      v += 1; if (sign) v = -v;
+      (*block)[natural_order[k]] = (JCOEF) v;
+    } while (k < cinfo->lim_Se);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Initialize for an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+start_pass (j_decompress_ptr cinfo)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci, tbl;
+  jpeg_component_info * compptr;
+
+  if (cinfo->progressive_mode) {
+    /* Validate progressive scan parameters */
+    if (cinfo->Ss == 0) {
+      if (cinfo->Se != 0)
+	goto bad;
+    } else {
+      /* need not check Ss/Se < 0 since they came from unsigned bytes */
+      if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se)
+	goto bad;
+      /* AC scans may have only one component */
+      if (cinfo->comps_in_scan != 1)
+	goto bad;
+    }
+    if (cinfo->Ah != 0) {
+      /* Successive approximation refinement scan: must have Al = Ah-1. */
+      if (cinfo->Ah-1 != cinfo->Al)
+	goto bad;
+    }
+    if (cinfo->Al > 13) {	/* need not check for < 0 */
+      bad:
+      ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
+	       cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
+    }
+    /* Update progression status, and verify that scan order is legal.
+     * Note that inter-scan inconsistencies are treated as warnings
+     * not fatal errors ... not clear if this is right way to behave.
+     */
+    for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+      int coefi, cindex = cinfo->cur_comp_info[ci]->component_index;
+      int *coef_bit_ptr = & cinfo->coef_bits[cindex][0];
+      if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */
+	WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0);
+      for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) {
+	int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi];
+	if (cinfo->Ah != expected)
+	  WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi);
+	coef_bit_ptr[coefi] = cinfo->Al;
+      }
+    }
+    /* Select MCU decoding routine */
+    if (cinfo->Ah == 0) {
+      if (cinfo->Ss == 0)
+	entropy->pub.decode_mcu = decode_mcu_DC_first;
+      else
+	entropy->pub.decode_mcu = decode_mcu_AC_first;
+    } else {
+      if (cinfo->Ss == 0)
+	entropy->pub.decode_mcu = decode_mcu_DC_refine;
+      else
+	entropy->pub.decode_mcu = decode_mcu_AC_refine;
+    }
+  } else {
+    /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG.
+     * This ought to be an error condition, but we make it a warning.
+     */
+    if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 ||
+	(cinfo->Se < DCTSIZE2 && cinfo->Se != cinfo->lim_Se))
+      WARNMS(cinfo, JWRN_NOT_SEQUENTIAL);
+    /* Select MCU decoding routine */
+    entropy->pub.decode_mcu = decode_mcu;
+  }
+
+  /* Allocate & initialize requested statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) {
+      tbl = compptr->dc_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->dc_stats[tbl] == NULL)
+	entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS);
+      MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS);
+      /* Initialize DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    if ((! cinfo->progressive_mode && cinfo->lim_Se) ||
+	(cinfo->progressive_mode && cinfo->Ss)) {
+      tbl = compptr->ac_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->ac_stats[tbl] == NULL)
+	entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS);
+      MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS);
+    }
+  }
+
+  /* Initialize arithmetic decoding variables */
+  entropy->c = 0;
+  entropy->a = 0;
+  entropy->ct = -16;	/* force reading 2 initial bytes to fill C */
+
+  /* Initialize restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+}
+
+
+/*
+ * Module initialization routine for arithmetic entropy decoding.
+ */
+
+GLOBAL(void)
+jinit_arith_decoder (j_decompress_ptr cinfo)
+{
+  arith_entropy_ptr entropy;
+  int i;
+
+  entropy = (arith_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(arith_entropy_decoder));
+  cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
+  entropy->pub.start_pass = start_pass;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_ARITH_TBLS; i++) {
+    entropy->dc_stats[i] = NULL;
+    entropy->ac_stats[i] = NULL;
+  }
+
+  /* Initialize index for fixed probability estimation */
+  entropy->fixed_bin[0] = 113;
+
+  if (cinfo->progressive_mode) {
+    /* Create progression status table */
+    int *coef_bit_ptr, ci;
+    cinfo->coef_bits = (int (*)[DCTSIZE2])
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  cinfo->num_components*DCTSIZE2*SIZEOF(int));
+    coef_bit_ptr = & cinfo->coef_bits[0][0];
+    for (ci = 0; ci < cinfo->num_components; ci++) 
+      for (i = 0; i < DCTSIZE2; i++)
+	*coef_bit_ptr++ = -1;
+  }
+}
diff --git a/jpeg-8d/jdatadst.c b/jpeg-8d/jdatadst.c
new file mode 100644
index 0000000..6981fb7
--- /dev/null
+++ b/jpeg-8d/jdatadst.c
@@ -0,0 +1,267 @@
+/*
+ * jdatadst.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2009-2012 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains compression data destination routines for the case of
+ * emitting JPEG data to memory or to a file (or any stdio stream).
+ * While these routines are sufficient for most applications,
+ * some will want to use a different destination manager.
+ * IMPORTANT: we assume that fwrite() will correctly transcribe an array of
+ * JOCTETs into 8-bit-wide elements on external storage.  If char is wider
+ * than 8 bits on your machine, you may need to do some tweaking.
+ */
+
+/* this is not a core library module, so it doesn't define JPEG_INTERNALS */
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jerror.h"
+
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc(),free() */
+extern void * malloc JPP((size_t size));
+extern void free JPP((void *ptr));
+#endif
+
+
+/* Expanded data destination object for stdio output */
+
+typedef struct {
+  struct jpeg_destination_mgr pub; /* public fields */
+
+  FILE * outfile;		/* target stream */
+  JOCTET * buffer;		/* start of buffer */
+} my_destination_mgr;
+
+typedef my_destination_mgr * my_dest_ptr;
+
+#define OUTPUT_BUF_SIZE  4096	/* choose an efficiently fwrite'able size */
+
+
+/* Expanded data destination object for memory output */
+
+typedef struct {
+  struct jpeg_destination_mgr pub; /* public fields */
+
+  unsigned char ** outbuffer;	/* target buffer */
+  unsigned long * outsize;
+  unsigned char * newbuffer;	/* newly allocated buffer */
+  JOCTET * buffer;		/* start of buffer */
+  size_t bufsize;
+} my_mem_destination_mgr;
+
+typedef my_mem_destination_mgr * my_mem_dest_ptr;
+
+
+/*
+ * Initialize destination --- called by jpeg_start_compress
+ * before any data is actually written.
+ */
+
+METHODDEF(void)
+init_destination (j_compress_ptr cinfo)
+{
+  my_dest_ptr dest = (my_dest_ptr) cinfo->dest;
+
+  /* Allocate the output buffer --- it will be released when done with image */
+  dest->buffer = (JOCTET *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  OUTPUT_BUF_SIZE * SIZEOF(JOCTET));
+
+  dest->pub.next_output_byte = dest->buffer;
+  dest->pub.free_in_buffer = OUTPUT_BUF_SIZE;
+}
+
+METHODDEF(void)
+init_mem_destination (j_compress_ptr cinfo)
+{
+  /* no work necessary here */
+}
+
+
+/*
+ * Empty the output buffer --- called whenever buffer fills up.
+ *
+ * In typical applications, this should write the entire output buffer
+ * (ignoring the current state of next_output_byte & free_in_buffer),
+ * reset the pointer & count to the start of the buffer, and return TRUE
+ * indicating that the buffer has been dumped.
+ *
+ * In applications that need to be able to suspend compression due to output
+ * overrun, a FALSE return indicates that the buffer cannot be emptied now.
+ * In this situation, the compressor will return to its caller (possibly with
+ * an indication that it has not accepted all the supplied scanlines).  The
+ * application should resume compression after it has made more room in the
+ * output buffer.  Note that there are substantial restrictions on the use of
+ * suspension --- see the documentation.
+ *
+ * When suspending, the compressor will back up to a convenient restart point
+ * (typically the start of the current MCU). next_output_byte & free_in_buffer
+ * indicate where the restart point will be if the current call returns FALSE.
+ * Data beyond this point will be regenerated after resumption, so do not
+ * write it out when emptying the buffer externally.
+ */
+
+METHODDEF(boolean)
+empty_output_buffer (j_compress_ptr cinfo)
+{
+  my_dest_ptr dest = (my_dest_ptr) cinfo->dest;
+
+  if (JFWRITE(dest->outfile, dest->buffer, OUTPUT_BUF_SIZE) !=
+      (size_t) OUTPUT_BUF_SIZE)
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+
+  dest->pub.next_output_byte = dest->buffer;
+  dest->pub.free_in_buffer = OUTPUT_BUF_SIZE;
+
+  return TRUE;
+}
+
+METHODDEF(boolean)
+empty_mem_output_buffer (j_compress_ptr cinfo)
+{
+  size_t nextsize;
+  JOCTET * nextbuffer;
+  my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest;
+
+  /* Try to allocate new buffer with double size */
+  nextsize = dest->bufsize * 2;
+  nextbuffer = (JOCTET *) malloc(nextsize);
+
+  if (nextbuffer == NULL)
+    ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10);
+
+  MEMCOPY(nextbuffer, dest->buffer, dest->bufsize);
+
+  if (dest->newbuffer != NULL)
+    free(dest->newbuffer);
+
+  dest->newbuffer = nextbuffer;
+
+  dest->pub.next_output_byte = nextbuffer + dest->bufsize;
+  dest->pub.free_in_buffer = dest->bufsize;
+
+  dest->buffer = nextbuffer;
+  dest->bufsize = nextsize;
+
+  return TRUE;
+}
+
+
+/*
+ * Terminate destination --- called by jpeg_finish_compress
+ * after all data has been written.  Usually needs to flush buffer.
+ *
+ * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding
+ * application must deal with any cleanup that should happen even
+ * for error exit.
+ */
+
+METHODDEF(void)
+term_destination (j_compress_ptr cinfo)
+{
+  my_dest_ptr dest = (my_dest_ptr) cinfo->dest;
+  size_t datacount = OUTPUT_BUF_SIZE - dest->pub.free_in_buffer;
+
+  /* Write any data remaining in the buffer */
+  if (datacount > 0) {
+    if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount)
+      ERREXIT(cinfo, JERR_FILE_WRITE);
+  }
+  fflush(dest->outfile);
+  /* Make sure we wrote the output file OK */
+  if (ferror(dest->outfile))
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+METHODDEF(void)
+term_mem_destination (j_compress_ptr cinfo)
+{
+  my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest;
+
+  *dest->outbuffer = dest->buffer;
+  *dest->outsize = dest->bufsize - dest->pub.free_in_buffer;
+}
+
+
+/*
+ * Prepare for output to a stdio stream.
+ * The caller must have already opened the stream, and is responsible
+ * for closing it after finishing compression.
+ */
+
+GLOBAL(void)
+jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile)
+{
+  my_dest_ptr dest;
+
+  /* The destination object is made permanent so that multiple JPEG images
+   * can be written to the same file without re-executing jpeg_stdio_dest.
+   * This makes it dangerous to use this manager and a different destination
+   * manager serially with the same JPEG object, because their private object
+   * sizes may be different.  Caveat programmer.
+   */
+  if (cinfo->dest == NULL) {	/* first time for this JPEG object? */
+    cinfo->dest = (struct jpeg_destination_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(my_destination_mgr));
+  }
+
+  dest = (my_dest_ptr) cinfo->dest;
+  dest->pub.init_destination = init_destination;
+  dest->pub.empty_output_buffer = empty_output_buffer;
+  dest->pub.term_destination = term_destination;
+  dest->outfile = outfile;
+}
+
+
+/*
+ * Prepare for output to a memory buffer.
+ * The caller may supply an own initial buffer with appropriate size.
+ * Otherwise, or when the actual data output exceeds the given size,
+ * the library adapts the buffer size as necessary.
+ * The standard library functions malloc/free are used for allocating
+ * larger memory, so the buffer is available to the application after
+ * finishing compression, and then the application is responsible for
+ * freeing the requested memory.
+ */
+
+GLOBAL(void)
+jpeg_mem_dest (j_compress_ptr cinfo,
+	       unsigned char ** outbuffer, unsigned long * outsize)
+{
+  my_mem_dest_ptr dest;
+
+  if (outbuffer == NULL || outsize == NULL)	/* sanity check */
+    ERREXIT(cinfo, JERR_BUFFER_SIZE);
+
+  /* The destination object is made permanent so that multiple JPEG images
+   * can be written to the same buffer without re-executing jpeg_mem_dest.
+   */
+  if (cinfo->dest == NULL) {	/* first time for this JPEG object? */
+    cinfo->dest = (struct jpeg_destination_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(my_mem_destination_mgr));
+  }
+
+  dest = (my_mem_dest_ptr) cinfo->dest;
+  dest->pub.init_destination = init_mem_destination;
+  dest->pub.empty_output_buffer = empty_mem_output_buffer;
+  dest->pub.term_destination = term_mem_destination;
+  dest->outbuffer = outbuffer;
+  dest->outsize = outsize;
+  dest->newbuffer = NULL;
+
+  if (*outbuffer == NULL || *outsize == 0) {
+    /* Allocate initial buffer */
+    dest->newbuffer = *outbuffer = (unsigned char *) malloc(OUTPUT_BUF_SIZE);
+    if (dest->newbuffer == NULL)
+      ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10);
+    *outsize = OUTPUT_BUF_SIZE;
+  }
+
+  dest->pub.next_output_byte = dest->buffer = *outbuffer;
+  dest->pub.free_in_buffer = dest->bufsize = *outsize;
+}
diff --git a/jpeg-8d/jdatasrc.c b/jpeg-8d/jdatasrc.c
new file mode 100644
index 0000000..7be59a8
--- /dev/null
+++ b/jpeg-8d/jdatasrc.c
@@ -0,0 +1,275 @@
+/*
+ * jdatasrc.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2009-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains decompression data source routines for the case of
+ * reading JPEG data from memory or from a file (or any stdio stream).
+ * While these routines are sufficient for most applications,
+ * some will want to use a different source manager.
+ * IMPORTANT: we assume that fread() will correctly transcribe an array of
+ * JOCTETs from 8-bit-wide elements on external storage.  If char is wider
+ * than 8 bits on your machine, you may need to do some tweaking.
+ */
+
+/* this is not a core library module, so it doesn't define JPEG_INTERNALS */
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jerror.h"
+
+
+/* Expanded data source object for stdio input */
+
+typedef struct {
+  struct jpeg_source_mgr pub;	/* public fields */
+
+  FILE * infile;		/* source stream */
+  JOCTET * buffer;		/* start of buffer */
+  boolean start_of_file;	/* have we gotten any data yet? */
+} my_source_mgr;
+
+typedef my_source_mgr * my_src_ptr;
+
+#define INPUT_BUF_SIZE  4096	/* choose an efficiently fread'able size */
+
+
+/*
+ * Initialize source --- called by jpeg_read_header
+ * before any data is actually read.
+ */
+
+METHODDEF(void)
+init_source (j_decompress_ptr cinfo)
+{
+  my_src_ptr src = (my_src_ptr) cinfo->src;
+
+  /* We reset the empty-input-file flag for each image,
+   * but we don't clear the input buffer.
+   * This is correct behavior for reading a series of images from one source.
+   */
+  src->start_of_file = TRUE;
+}
+
+METHODDEF(void)
+init_mem_source (j_decompress_ptr cinfo)
+{
+  /* no work necessary here */
+}
+
+
+/*
+ * Fill the input buffer --- called whenever buffer is emptied.
+ *
+ * In typical applications, this should read fresh data into the buffer
+ * (ignoring the current state of next_input_byte & bytes_in_buffer),
+ * reset the pointer & count to the start of the buffer, and return TRUE
+ * indicating that the buffer has been reloaded.  It is not necessary to
+ * fill the buffer entirely, only to obtain at least one more byte.
+ *
+ * There is no such thing as an EOF return.  If the end of the file has been
+ * reached, the routine has a choice of ERREXIT() or inserting fake data into
+ * the buffer.  In most cases, generating a warning message and inserting a
+ * fake EOI marker is the best course of action --- this will allow the
+ * decompressor to output however much of the image is there.  However,
+ * the resulting error message is misleading if the real problem is an empty
+ * input file, so we handle that case specially.
+ *
+ * In applications that need to be able to suspend compression due to input
+ * not being available yet, a FALSE return indicates that no more data can be
+ * obtained right now, but more may be forthcoming later.  In this situation,
+ * the decompressor will return to its caller (with an indication of the
+ * number of scanlines it has read, if any).  The application should resume
+ * decompression after it has loaded more data into the input buffer.  Note
+ * that there are substantial restrictions on the use of suspension --- see
+ * the documentation.
+ *
+ * When suspending, the decompressor will back up to a convenient restart point
+ * (typically the start of the current MCU). next_input_byte & bytes_in_buffer
+ * indicate where the restart point will be if the current call returns FALSE.
+ * Data beyond this point must be rescanned after resumption, so move it to
+ * the front of the buffer rather than discarding it.
+ */
+
+METHODDEF(boolean)
+fill_input_buffer (j_decompress_ptr cinfo)
+{
+  my_src_ptr src = (my_src_ptr) cinfo->src;
+  size_t nbytes;
+
+  nbytes = JFREAD(src->infile, src->buffer, INPUT_BUF_SIZE);
+
+  if (nbytes <= 0) {
+    if (src->start_of_file)	/* Treat empty input file as fatal error */
+      ERREXIT(cinfo, JERR_INPUT_EMPTY);
+    WARNMS(cinfo, JWRN_JPEG_EOF);
+    /* Insert a fake EOI marker */
+    src->buffer[0] = (JOCTET) 0xFF;
+    src->buffer[1] = (JOCTET) JPEG_EOI;
+    nbytes = 2;
+  }
+
+  src->pub.next_input_byte = src->buffer;
+  src->pub.bytes_in_buffer = nbytes;
+  src->start_of_file = FALSE;
+
+  return TRUE;
+}
+
+METHODDEF(boolean)
+fill_mem_input_buffer (j_decompress_ptr cinfo)
+{
+  static const JOCTET mybuffer[4] = {
+    (JOCTET) 0xFF, (JOCTET) JPEG_EOI, 0, 0
+  };
+
+  /* The whole JPEG data is expected to reside in the supplied memory
+   * buffer, so any request for more data beyond the given buffer size
+   * is treated as an error.
+   */
+  WARNMS(cinfo, JWRN_JPEG_EOF);
+
+  /* Insert a fake EOI marker */
+
+  cinfo->src->next_input_byte = mybuffer;
+  cinfo->src->bytes_in_buffer = 2;
+
+  return TRUE;
+}
+
+
+/*
+ * Skip data --- used to skip over a potentially large amount of
+ * uninteresting data (such as an APPn marker).
+ *
+ * Writers of suspendable-input applications must note that skip_input_data
+ * is not granted the right to give a suspension return.  If the skip extends
+ * beyond the data currently in the buffer, the buffer can be marked empty so
+ * that the next read will cause a fill_input_buffer call that can suspend.
+ * Arranging for additional bytes to be discarded before reloading the input
+ * buffer is the application writer's problem.
+ */
+
+METHODDEF(void)
+skip_input_data (j_decompress_ptr cinfo, long num_bytes)
+{
+  struct jpeg_source_mgr * src = cinfo->src;
+
+  /* Just a dumb implementation for now.  Could use fseek() except
+   * it doesn't work on pipes.  Not clear that being smart is worth
+   * any trouble anyway --- large skips are infrequent.
+   */
+  if (num_bytes > 0) {
+    while (num_bytes > (long) src->bytes_in_buffer) {
+      num_bytes -= (long) src->bytes_in_buffer;
+      (void) (*src->fill_input_buffer) (cinfo);
+      /* note we assume that fill_input_buffer will never return FALSE,
+       * so suspension need not be handled.
+       */
+    }
+    src->next_input_byte += (size_t) num_bytes;
+    src->bytes_in_buffer -= (size_t) num_bytes;
+  }
+}
+
+
+/*
+ * An additional method that can be provided by data source modules is the
+ * resync_to_restart method for error recovery in the presence of RST markers.
+ * For the moment, this source module just uses the default resync method
+ * provided by the JPEG library.  That method assumes that no backtracking
+ * is possible.
+ */
+
+
+/*
+ * Terminate source --- called by jpeg_finish_decompress
+ * after all data has been read.  Often a no-op.
+ *
+ * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding
+ * application must deal with any cleanup that should happen even
+ * for error exit.
+ */
+
+METHODDEF(void)
+term_source (j_decompress_ptr cinfo)
+{
+  /* no work necessary here */
+}
+
+
+/*
+ * Prepare for input from a stdio stream.
+ * The caller must have already opened the stream, and is responsible
+ * for closing it after finishing decompression.
+ */
+
+GLOBAL(void)
+jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile)
+{
+  my_src_ptr src;
+
+  /* The source object and input buffer are made permanent so that a series
+   * of JPEG images can be read from the same file by calling jpeg_stdio_src
+   * only before the first one.  (If we discarded the buffer at the end of
+   * one image, we'd likely lose the start of the next one.)
+   * This makes it unsafe to use this manager and a different source
+   * manager serially with the same JPEG object.  Caveat programmer.
+   */
+  if (cinfo->src == NULL) {	/* first time for this JPEG object? */
+    cinfo->src = (struct jpeg_source_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(my_source_mgr));
+    src = (my_src_ptr) cinfo->src;
+    src->buffer = (JOCTET *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  INPUT_BUF_SIZE * SIZEOF(JOCTET));
+  }
+
+  src = (my_src_ptr) cinfo->src;
+  src->pub.init_source = init_source;
+  src->pub.fill_input_buffer = fill_input_buffer;
+  src->pub.skip_input_data = skip_input_data;
+  src->pub.resync_to_restart = jpeg_resync_to_restart; /* use default method */
+  src->pub.term_source = term_source;
+  src->infile = infile;
+  src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */
+  src->pub.next_input_byte = NULL; /* until buffer loaded */
+}
+
+
+/*
+ * Prepare for input from a supplied memory buffer.
+ * The buffer must contain the whole JPEG data.
+ */
+
+GLOBAL(void)
+jpeg_mem_src (j_decompress_ptr cinfo,
+	      unsigned char * inbuffer, unsigned long insize)
+{
+  struct jpeg_source_mgr * src;
+
+  if (inbuffer == NULL || insize == 0)	/* Treat empty input as fatal error */
+    ERREXIT(cinfo, JERR_INPUT_EMPTY);
+
+  /* The source object is made permanent so that a series of JPEG images
+   * can be read from the same buffer by calling jpeg_mem_src only before
+   * the first one.
+   */
+  if (cinfo->src == NULL) {	/* first time for this JPEG object? */
+    cinfo->src = (struct jpeg_source_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(struct jpeg_source_mgr));
+  }
+
+  src = cinfo->src;
+  src->init_source = init_mem_source;
+  src->fill_input_buffer = fill_mem_input_buffer;
+  src->skip_input_data = skip_input_data;
+  src->resync_to_restart = jpeg_resync_to_restart; /* use default method */
+  src->term_source = term_source;
+  src->bytes_in_buffer = (size_t) insize;
+  src->next_input_byte = (JOCTET *) inbuffer;
+}
diff --git a/jpeg-8d/jdcoefct.c b/jpeg-8d/jdcoefct.c
new file mode 100644
index 0000000..ed02fc3
--- /dev/null
+++ b/jpeg-8d/jdcoefct.c
@@ -0,0 +1,741 @@
+/*
+ * jdcoefct.c
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 2002-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the coefficient buffer controller for decompression.
+ * This controller is the top level of the JPEG decompressor proper.
+ * The coefficient buffer lies between entropy decoding and inverse-DCT steps.
+ *
+ * In buffered-image mode, this controller is the interface between
+ * input-oriented processing and output-oriented processing.
+ * Also, the input side (only) is used when reading a file for transcoding.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+/* Block smoothing is only applicable for progressive JPEG, so: */
+#ifndef D_PROGRESSIVE_SUPPORTED
+#undef BLOCK_SMOOTHING_SUPPORTED
+#endif
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_d_coef_controller pub; /* public fields */
+
+  /* These variables keep track of the current location of the input side. */
+  /* cinfo->input_iMCU_row is also used for this. */
+  JDIMENSION MCU_ctr;		/* counts MCUs processed in current row */
+  int MCU_vert_offset;		/* counts MCU rows within iMCU row */
+  int MCU_rows_per_iMCU_row;	/* number of such rows needed */
+
+  /* The output side's location is represented by cinfo->output_iMCU_row. */
+
+  /* In single-pass modes, it's sufficient to buffer just one MCU.
+   * We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks,
+   * and let the entropy decoder write into that workspace each time.
+   * (On 80x86, the workspace is FAR even though it's not really very big;
+   * this is to keep the module interfaces unchanged when a large coefficient
+   * buffer is necessary.)
+   * In multi-pass modes, this array points to the current MCU's blocks
+   * within the virtual arrays; it is used only by the input side.
+   */
+  JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU];
+
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+  /* In multi-pass modes, we need a virtual block array for each component. */
+  jvirt_barray_ptr whole_image[MAX_COMPONENTS];
+#endif
+
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+  /* When doing block smoothing, we latch coefficient Al values here */
+  int * coef_bits_latch;
+#define SAVED_COEFS  6		/* we save coef_bits[0..5] */
+#endif
+} my_coef_controller;
+
+typedef my_coef_controller * my_coef_ptr;
+
+/* Forward declarations */
+METHODDEF(int) decompress_onepass
+	JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+METHODDEF(int) decompress_data
+	JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
+#endif
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+LOCAL(boolean) smoothing_ok JPP((j_decompress_ptr cinfo));
+METHODDEF(int) decompress_smooth_data
+	JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf));
+#endif
+
+
+LOCAL(void)
+start_iMCU_row (j_decompress_ptr cinfo)
+/* Reset within-iMCU-row counters for a new row (input side) */
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+
+  /* In an interleaved scan, an MCU row is the same as an iMCU row.
+   * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
+   * But at the bottom of the image, process only what's left.
+   */
+  if (cinfo->comps_in_scan > 1) {
+    coef->MCU_rows_per_iMCU_row = 1;
+  } else {
+    if (cinfo->input_iMCU_row < (cinfo->total_iMCU_rows-1))
+      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
+    else
+      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
+  }
+
+  coef->MCU_ctr = 0;
+  coef->MCU_vert_offset = 0;
+}
+
+
+/*
+ * Initialize for an input processing pass.
+ */
+
+METHODDEF(void)
+start_input_pass (j_decompress_ptr cinfo)
+{
+  cinfo->input_iMCU_row = 0;
+  start_iMCU_row(cinfo);
+}
+
+
+/*
+ * Initialize for an output processing pass.
+ */
+
+METHODDEF(void)
+start_output_pass (j_decompress_ptr cinfo)
+{
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+
+  /* If multipass, check to see whether to use block smoothing on this pass */
+  if (coef->pub.coef_arrays != NULL) {
+    if (cinfo->do_block_smoothing && smoothing_ok(cinfo))
+      coef->pub.decompress_data = decompress_smooth_data;
+    else
+      coef->pub.decompress_data = decompress_data;
+  }
+#endif
+  cinfo->output_iMCU_row = 0;
+}
+
+
+/*
+ * Decompress and return some data in the single-pass case.
+ * Always attempts to emit one fully interleaved MCU row ("iMCU" row).
+ * Input and output must run in lockstep since we have only a one-MCU buffer.
+ * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
+ *
+ * NB: output_buf contains a plane for each component in image,
+ * which we index according to the component's SOF position.
+ */
+
+METHODDEF(int)
+decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION MCU_col_num;	/* index of current MCU within row */
+  JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  int blkn, ci, xindex, yindex, yoffset, useful_width;
+  JSAMPARRAY output_ptr;
+  JDIMENSION start_col, output_col;
+  jpeg_component_info *compptr;
+  inverse_DCT_method_ptr inverse_DCT;
+
+  /* Loop to process as much as one whole iMCU row */
+  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
+       yoffset++) {
+    for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col;
+	 MCU_col_num++) {
+      /* Try to fetch an MCU.  Entropy decoder expects buffer to be zeroed. */
+      if (cinfo->lim_Se)	/* can bypass in DC only case */
+	FMEMZERO((void FAR *) coef->MCU_buffer[0],
+		 (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK)));
+      if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
+	/* Suspension forced; update state counters and exit */
+	coef->MCU_vert_offset = yoffset;
+	coef->MCU_ctr = MCU_col_num;
+	return JPEG_SUSPENDED;
+      }
+      /* Determine where data should go in output_buf and do the IDCT thing.
+       * We skip dummy blocks at the right and bottom edges (but blkn gets
+       * incremented past them!).  Note the inner loop relies on having
+       * allocated the MCU_buffer[] blocks sequentially.
+       */
+      blkn = 0;			/* index of current DCT block within MCU */
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+	compptr = cinfo->cur_comp_info[ci];
+	/* Don't bother to IDCT an uninteresting component. */
+	if (! compptr->component_needed) {
+	  blkn += compptr->MCU_blocks;
+	  continue;
+	}
+	inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index];
+	useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
+						    : compptr->last_col_width;
+	output_ptr = output_buf[compptr->component_index] +
+	  yoffset * compptr->DCT_v_scaled_size;
+	start_col = MCU_col_num * compptr->MCU_sample_width;
+	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+	  if (cinfo->input_iMCU_row < last_iMCU_row ||
+	      yoffset+yindex < compptr->last_row_height) {
+	    output_col = start_col;
+	    for (xindex = 0; xindex < useful_width; xindex++) {
+	      (*inverse_DCT) (cinfo, compptr,
+			      (JCOEFPTR) coef->MCU_buffer[blkn+xindex],
+			      output_ptr, output_col);
+	      output_col += compptr->DCT_h_scaled_size;
+	    }
+	  }
+	  blkn += compptr->MCU_width;
+	  output_ptr += compptr->DCT_v_scaled_size;
+	}
+      }
+    }
+    /* Completed an MCU row, but perhaps not an iMCU row */
+    coef->MCU_ctr = 0;
+  }
+  /* Completed the iMCU row, advance counters for next one */
+  cinfo->output_iMCU_row++;
+  if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) {
+    start_iMCU_row(cinfo);
+    return JPEG_ROW_COMPLETED;
+  }
+  /* Completed the scan */
+  (*cinfo->inputctl->finish_input_pass) (cinfo);
+  return JPEG_SCAN_COMPLETED;
+}
+
+
+/*
+ * Dummy consume-input routine for single-pass operation.
+ */
+
+METHODDEF(int)
+dummy_consume_data (j_decompress_ptr cinfo)
+{
+  return JPEG_SUSPENDED;	/* Always indicate nothing was done */
+}
+
+
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+
+/*
+ * Consume input data and store it in the full-image coefficient buffer.
+ * We read as much as one fully interleaved MCU row ("iMCU" row) per call,
+ * ie, v_samp_factor block rows for each component in the scan.
+ * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
+ */
+
+METHODDEF(int)
+consume_data (j_decompress_ptr cinfo)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION MCU_col_num;	/* index of current MCU within row */
+  int blkn, ci, xindex, yindex, yoffset;
+  JDIMENSION start_col;
+  JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
+  JBLOCKROW buffer_ptr;
+  jpeg_component_info *compptr;
+
+  /* Align the virtual buffers for the components used in this scan. */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    buffer[ci] = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
+       cinfo->input_iMCU_row * compptr->v_samp_factor,
+       (JDIMENSION) compptr->v_samp_factor, TRUE);
+    /* Note: entropy decoder expects buffer to be zeroed,
+     * but this is handled automatically by the memory manager
+     * because we requested a pre-zeroed array.
+     */
+  }
+
+  /* Loop to process one whole iMCU row */
+  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
+       yoffset++) {
+    for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row;
+	 MCU_col_num++) {
+      /* Construct list of pointers to DCT blocks belonging to this MCU */
+      blkn = 0;			/* index of current DCT block within MCU */
+      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+	compptr = cinfo->cur_comp_info[ci];
+	start_col = MCU_col_num * compptr->MCU_width;
+	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+	  buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
+	  for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
+	    coef->MCU_buffer[blkn++] = buffer_ptr++;
+	  }
+	}
+      }
+      /* Try to fetch the MCU. */
+      if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
+	/* Suspension forced; update state counters and exit */
+	coef->MCU_vert_offset = yoffset;
+	coef->MCU_ctr = MCU_col_num;
+	return JPEG_SUSPENDED;
+      }
+    }
+    /* Completed an MCU row, but perhaps not an iMCU row */
+    coef->MCU_ctr = 0;
+  }
+  /* Completed the iMCU row, advance counters for next one */
+  if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) {
+    start_iMCU_row(cinfo);
+    return JPEG_ROW_COMPLETED;
+  }
+  /* Completed the scan */
+  (*cinfo->inputctl->finish_input_pass) (cinfo);
+  return JPEG_SCAN_COMPLETED;
+}
+
+
+/*
+ * Decompress and return some data in the multi-pass case.
+ * Always attempts to emit one fully interleaved MCU row ("iMCU" row).
+ * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
+ *
+ * NB: output_buf contains a plane for each component in image.
+ */
+
+METHODDEF(int)
+decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  JDIMENSION block_num;
+  int ci, block_row, block_rows;
+  JBLOCKARRAY buffer;
+  JBLOCKROW buffer_ptr;
+  JSAMPARRAY output_ptr;
+  JDIMENSION output_col;
+  jpeg_component_info *compptr;
+  inverse_DCT_method_ptr inverse_DCT;
+
+  /* Force some input to be done if we are getting ahead of the input. */
+  while (cinfo->input_scan_number < cinfo->output_scan_number ||
+	 (cinfo->input_scan_number == cinfo->output_scan_number &&
+	  cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) {
+    if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED)
+      return JPEG_SUSPENDED;
+  }
+
+  /* OK, output from the virtual arrays. */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Don't bother to IDCT an uninteresting component. */
+    if (! compptr->component_needed)
+      continue;
+    /* Align the virtual buffer for this component. */
+    buffer = (*cinfo->mem->access_virt_barray)
+      ((j_common_ptr) cinfo, coef->whole_image[ci],
+       cinfo->output_iMCU_row * compptr->v_samp_factor,
+       (JDIMENSION) compptr->v_samp_factor, FALSE);
+    /* Count non-dummy DCT block rows in this iMCU row. */
+    if (cinfo->output_iMCU_row < last_iMCU_row)
+      block_rows = compptr->v_samp_factor;
+    else {
+      /* NB: can't use last_row_height here; it is input-side-dependent! */
+      block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
+      if (block_rows == 0) block_rows = compptr->v_samp_factor;
+    }
+    inverse_DCT = cinfo->idct->inverse_DCT[ci];
+    output_ptr = output_buf[ci];
+    /* Loop over all DCT blocks to be processed. */
+    for (block_row = 0; block_row < block_rows; block_row++) {
+      buffer_ptr = buffer[block_row];
+      output_col = 0;
+      for (block_num = 0; block_num < compptr->width_in_blocks; block_num++) {
+	(*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr,
+			output_ptr, output_col);
+	buffer_ptr++;
+	output_col += compptr->DCT_h_scaled_size;
+      }
+      output_ptr += compptr->DCT_v_scaled_size;
+    }
+  }
+
+  if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows)
+    return JPEG_ROW_COMPLETED;
+  return JPEG_SCAN_COMPLETED;
+}
+
+#endif /* D_MULTISCAN_FILES_SUPPORTED */
+
+
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+
+/*
+ * This code applies interblock smoothing as described by section K.8
+ * of the JPEG standard: the first 5 AC coefficients are estimated from
+ * the DC values of a DCT block and its 8 neighboring blocks.
+ * We apply smoothing only for progressive JPEG decoding, and only if
+ * the coefficients it can estimate are not yet known to full precision.
+ */
+
+/* Natural-order array positions of the first 5 zigzag-order coefficients */
+#define Q01_POS  1
+#define Q10_POS  8
+#define Q20_POS  16
+#define Q11_POS  9
+#define Q02_POS  2
+
+/*
+ * Determine whether block smoothing is applicable and safe.
+ * We also latch the current states of the coef_bits[] entries for the
+ * AC coefficients; otherwise, if the input side of the decompressor
+ * advances into a new scan, we might think the coefficients are known
+ * more accurately than they really are.
+ */
+
+LOCAL(boolean)
+smoothing_ok (j_decompress_ptr cinfo)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  boolean smoothing_useful = FALSE;
+  int ci, coefi;
+  jpeg_component_info *compptr;
+  JQUANT_TBL * qtable;
+  int * coef_bits;
+  int * coef_bits_latch;
+
+  if (! cinfo->progressive_mode || cinfo->coef_bits == NULL)
+    return FALSE;
+
+  /* Allocate latch area if not already done */
+  if (coef->coef_bits_latch == NULL)
+    coef->coef_bits_latch = (int *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  cinfo->num_components *
+				  (SAVED_COEFS * SIZEOF(int)));
+  coef_bits_latch = coef->coef_bits_latch;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* All components' quantization values must already be latched. */
+    if ((qtable = compptr->quant_table) == NULL)
+      return FALSE;
+    /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */
+    if (qtable->quantval[0] == 0 ||
+	qtable->quantval[Q01_POS] == 0 ||
+	qtable->quantval[Q10_POS] == 0 ||
+	qtable->quantval[Q20_POS] == 0 ||
+	qtable->quantval[Q11_POS] == 0 ||
+	qtable->quantval[Q02_POS] == 0)
+      return FALSE;
+    /* DC values must be at least partly known for all components. */
+    coef_bits = cinfo->coef_bits[ci];
+    if (coef_bits[0] < 0)
+      return FALSE;
+    /* Block smoothing is helpful if some AC coefficients remain inaccurate. */
+    for (coefi = 1; coefi <= 5; coefi++) {
+      coef_bits_latch[coefi] = coef_bits[coefi];
+      if (coef_bits[coefi] != 0)
+	smoothing_useful = TRUE;
+    }
+    coef_bits_latch += SAVED_COEFS;
+  }
+
+  return smoothing_useful;
+}
+
+
+/*
+ * Variant of decompress_data for use when doing block smoothing.
+ */
+
+METHODDEF(int)
+decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
+{
+  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
+  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
+  JDIMENSION block_num, last_block_column;
+  int ci, block_row, block_rows, access_rows;
+  JBLOCKARRAY buffer;
+  JBLOCKROW buffer_ptr, prev_block_row, next_block_row;
+  JSAMPARRAY output_ptr;
+  JDIMENSION output_col;
+  jpeg_component_info *compptr;
+  inverse_DCT_method_ptr inverse_DCT;
+  boolean first_row, last_row;
+  JBLOCK workspace;
+  int *coef_bits;
+  JQUANT_TBL *quanttbl;
+  INT32 Q00,Q01,Q02,Q10,Q11,Q20, num;
+  int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9;
+  int Al, pred;
+
+  /* Force some input to be done if we are getting ahead of the input. */
+  while (cinfo->input_scan_number <= cinfo->output_scan_number &&
+	 ! cinfo->inputctl->eoi_reached) {
+    if (cinfo->input_scan_number == cinfo->output_scan_number) {
+      /* If input is working on current scan, we ordinarily want it to
+       * have completed the current row.  But if input scan is DC,
+       * we want it to keep one row ahead so that next block row's DC
+       * values are up to date.
+       */
+      JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0;
+      if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta)
+	break;
+    }
+    if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED)
+      return JPEG_SUSPENDED;
+  }
+
+  /* OK, output from the virtual arrays. */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Don't bother to IDCT an uninteresting component. */
+    if (! compptr->component_needed)
+      continue;
+    /* Count non-dummy DCT block rows in this iMCU row. */
+    if (cinfo->output_iMCU_row < last_iMCU_row) {
+      block_rows = compptr->v_samp_factor;
+      access_rows = block_rows * 2; /* this and next iMCU row */
+      last_row = FALSE;
+    } else {
+      /* NB: can't use last_row_height here; it is input-side-dependent! */
+      block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
+      if (block_rows == 0) block_rows = compptr->v_samp_factor;
+      access_rows = block_rows; /* this iMCU row only */
+      last_row = TRUE;
+    }
+    /* Align the virtual buffer for this component. */
+    if (cinfo->output_iMCU_row > 0) {
+      access_rows += compptr->v_samp_factor; /* prior iMCU row too */
+      buffer = (*cinfo->mem->access_virt_barray)
+	((j_common_ptr) cinfo, coef->whole_image[ci],
+	 (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor,
+	 (JDIMENSION) access_rows, FALSE);
+      buffer += compptr->v_samp_factor;	/* point to current iMCU row */
+      first_row = FALSE;
+    } else {
+      buffer = (*cinfo->mem->access_virt_barray)
+	((j_common_ptr) cinfo, coef->whole_image[ci],
+	 (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE);
+      first_row = TRUE;
+    }
+    /* Fetch component-dependent info */
+    coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS);
+    quanttbl = compptr->quant_table;
+    Q00 = quanttbl->quantval[0];
+    Q01 = quanttbl->quantval[Q01_POS];
+    Q10 = quanttbl->quantval[Q10_POS];
+    Q20 = quanttbl->quantval[Q20_POS];
+    Q11 = quanttbl->quantval[Q11_POS];
+    Q02 = quanttbl->quantval[Q02_POS];
+    inverse_DCT = cinfo->idct->inverse_DCT[ci];
+    output_ptr = output_buf[ci];
+    /* Loop over all DCT blocks to be processed. */
+    for (block_row = 0; block_row < block_rows; block_row++) {
+      buffer_ptr = buffer[block_row];
+      if (first_row && block_row == 0)
+	prev_block_row = buffer_ptr;
+      else
+	prev_block_row = buffer[block_row-1];
+      if (last_row && block_row == block_rows-1)
+	next_block_row = buffer_ptr;
+      else
+	next_block_row = buffer[block_row+1];
+      /* We fetch the surrounding DC values using a sliding-register approach.
+       * Initialize all nine here so as to do the right thing on narrow pics.
+       */
+      DC1 = DC2 = DC3 = (int) prev_block_row[0][0];
+      DC4 = DC5 = DC6 = (int) buffer_ptr[0][0];
+      DC7 = DC8 = DC9 = (int) next_block_row[0][0];
+      output_col = 0;
+      last_block_column = compptr->width_in_blocks - 1;
+      for (block_num = 0; block_num <= last_block_column; block_num++) {
+	/* Fetch current DCT block into workspace so we can modify it. */
+	jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1);
+	/* Update DC values */
+	if (block_num < last_block_column) {
+	  DC3 = (int) prev_block_row[1][0];
+	  DC6 = (int) buffer_ptr[1][0];
+	  DC9 = (int) next_block_row[1][0];
+	}
+	/* Compute coefficient estimates per K.8.
+	 * An estimate is applied only if coefficient is still zero,
+	 * and is not known to be fully accurate.
+	 */
+	/* AC01 */
+	if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) {
+	  num = 36 * Q00 * (DC4 - DC6);
+	  if (num >= 0) {
+	    pred = (int) (((Q01<<7) + num) / (Q01<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	  } else {
+	    pred = (int) (((Q01<<7) - num) / (Q01<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	    pred = -pred;
+	  }
+	  workspace[1] = (JCOEF) pred;
+	}
+	/* AC10 */
+	if ((Al=coef_bits[2]) != 0 && workspace[8] == 0) {
+	  num = 36 * Q00 * (DC2 - DC8);
+	  if (num >= 0) {
+	    pred = (int) (((Q10<<7) + num) / (Q10<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	  } else {
+	    pred = (int) (((Q10<<7) - num) / (Q10<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	    pred = -pred;
+	  }
+	  workspace[8] = (JCOEF) pred;
+	}
+	/* AC20 */
+	if ((Al=coef_bits[3]) != 0 && workspace[16] == 0) {
+	  num = 9 * Q00 * (DC2 + DC8 - 2*DC5);
+	  if (num >= 0) {
+	    pred = (int) (((Q20<<7) + num) / (Q20<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	  } else {
+	    pred = (int) (((Q20<<7) - num) / (Q20<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	    pred = -pred;
+	  }
+	  workspace[16] = (JCOEF) pred;
+	}
+	/* AC11 */
+	if ((Al=coef_bits[4]) != 0 && workspace[9] == 0) {
+	  num = 5 * Q00 * (DC1 - DC3 - DC7 + DC9);
+	  if (num >= 0) {
+	    pred = (int) (((Q11<<7) + num) / (Q11<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	  } else {
+	    pred = (int) (((Q11<<7) - num) / (Q11<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	    pred = -pred;
+	  }
+	  workspace[9] = (JCOEF) pred;
+	}
+	/* AC02 */
+	if ((Al=coef_bits[5]) != 0 && workspace[2] == 0) {
+	  num = 9 * Q00 * (DC4 + DC6 - 2*DC5);
+	  if (num >= 0) {
+	    pred = (int) (((Q02<<7) + num) / (Q02<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	  } else {
+	    pred = (int) (((Q02<<7) - num) / (Q02<<8));
+	    if (Al > 0 && pred >= (1<<Al))
+	      pred = (1<<Al)-1;
+	    pred = -pred;
+	  }
+	  workspace[2] = (JCOEF) pred;
+	}
+	/* OK, do the IDCT */
+	(*inverse_DCT) (cinfo, compptr, (JCOEFPTR) workspace,
+			output_ptr, output_col);
+	/* Advance for next column */
+	DC1 = DC2; DC2 = DC3;
+	DC4 = DC5; DC5 = DC6;
+	DC7 = DC8; DC8 = DC9;
+	buffer_ptr++, prev_block_row++, next_block_row++;
+	output_col += compptr->DCT_h_scaled_size;
+      }
+      output_ptr += compptr->DCT_v_scaled_size;
+    }
+  }
+
+  if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows)
+    return JPEG_ROW_COMPLETED;
+  return JPEG_SCAN_COMPLETED;
+}
+
+#endif /* BLOCK_SMOOTHING_SUPPORTED */
+
+
+/*
+ * Initialize coefficient buffer controller.
+ */
+
+GLOBAL(void)
+jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
+{
+  my_coef_ptr coef;
+
+  coef = (my_coef_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_coef_controller));
+  cinfo->coef = (struct jpeg_d_coef_controller *) coef;
+  coef->pub.start_input_pass = start_input_pass;
+  coef->pub.start_output_pass = start_output_pass;
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+  coef->coef_bits_latch = NULL;
+#endif
+
+  /* Create the coefficient buffer. */
+  if (need_full_buffer) {
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+    /* Allocate a full-image virtual array for each component, */
+    /* padded to a multiple of samp_factor DCT blocks in each direction. */
+    /* Note we ask for a pre-zeroed array. */
+    int ci, access_rows;
+    jpeg_component_info *compptr;
+
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      access_rows = compptr->v_samp_factor;
+#ifdef BLOCK_SMOOTHING_SUPPORTED
+      /* If block smoothing could be used, need a bigger window */
+      if (cinfo->progressive_mode)
+	access_rows *= 3;
+#endif
+      coef->whole_image[ci] = (*cinfo->mem->request_virt_barray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE,
+	 (JDIMENSION) jround_up((long) compptr->width_in_blocks,
+				(long) compptr->h_samp_factor),
+	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
+				(long) compptr->v_samp_factor),
+	 (JDIMENSION) access_rows);
+    }
+    coef->pub.consume_data = consume_data;
+    coef->pub.decompress_data = decompress_data;
+    coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+  } else {
+    /* We only need a single-MCU buffer. */
+    JBLOCKROW buffer;
+    int i;
+
+    buffer = (JBLOCKROW)
+      (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
+    for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) {
+      coef->MCU_buffer[i] = buffer + i;
+    }
+    if (cinfo->lim_Se == 0)	/* DC only case: want to bypass later */
+      FMEMZERO((void FAR *) buffer,
+	       (size_t) (D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)));
+    coef->pub.consume_data = dummy_consume_data;
+    coef->pub.decompress_data = decompress_onepass;
+    coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */
+  }
+}
diff --git a/jpeg-8d/jdcolor.c b/jpeg-8d/jdcolor.c
new file mode 100644
index 0000000..83e4d06
--- /dev/null
+++ b/jpeg-8d/jdcolor.c
@@ -0,0 +1,512 @@
+/*
+ * jdcolor.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains output colorspace conversion routines.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Private subobject */
+
+typedef struct {
+  struct jpeg_color_deconverter pub; /* public fields */
+
+  /* Private state for YCC->RGB conversion */
+  int * Cr_r_tab;		/* => table for Cr to R conversion */
+  int * Cb_b_tab;		/* => table for Cb to B conversion */
+  INT32 * Cr_g_tab;		/* => table for Cr to G conversion */
+  INT32 * Cb_g_tab;		/* => table for Cb to G conversion */
+
+  /* Private state for RGB->Y conversion */
+  INT32 * rgb_y_tab;		/* => table for RGB to Y conversion */
+} my_color_deconverter;
+
+typedef my_color_deconverter * my_cconvert_ptr;
+
+
+/**************** YCbCr -> RGB conversion: most common case **************/
+/****************   RGB -> Y   conversion: less common case **************/
+
+/*
+ * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
+ * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
+ * The conversion equations to be implemented are therefore
+ *
+ *	R = Y                + 1.40200 * Cr
+ *	G = Y - 0.34414 * Cb - 0.71414 * Cr
+ *	B = Y + 1.77200 * Cb
+ *
+ *	Y = 0.29900 * R + 0.58700 * G + 0.11400 * B
+ *
+ * where Cb and Cr represent the incoming values less CENTERJSAMPLE.
+ * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
+ *
+ * To avoid floating-point arithmetic, we represent the fractional constants
+ * as integers scaled up by 2^16 (about 4 digits precision); we have to divide
+ * the products by 2^16, with appropriate rounding, to get the correct answer.
+ * Notice that Y, being an integral input, does not contribute any fraction
+ * so it need not participate in the rounding.
+ *
+ * For even more speed, we avoid doing any multiplications in the inner loop
+ * by precalculating the constants times Cb and Cr for all possible values.
+ * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
+ * for 12-bit samples it is still acceptable.  It's not very reasonable for
+ * 16-bit samples, but if you want lossless storage you shouldn't be changing
+ * colorspace anyway.
+ * The Cr=>R and Cb=>B values can be rounded to integers in advance; the
+ * values for the G calculation are left scaled up, since we must add them
+ * together before rounding.
+ */
+
+#define SCALEBITS	16	/* speediest right-shift on some machines */
+#define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
+#define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
+
+/* We allocate one big table for RGB->Y conversion and divide it up into
+ * three parts, instead of doing three alloc_small requests.  This lets us
+ * use a single table base address, which can be held in a register in the
+ * inner loops on many machines (more than can hold all three addresses,
+ * anyway).
+ */
+
+#define R_Y_OFF		0			/* offset to R => Y section */
+#define G_Y_OFF		(1*(MAXJSAMPLE+1))	/* offset to G => Y section */
+#define B_Y_OFF		(2*(MAXJSAMPLE+1))	/* etc. */
+#define TABLE_SIZE	(3*(MAXJSAMPLE+1))
+
+
+/*
+ * Initialize tables for YCC->RGB colorspace conversion.
+ */
+
+LOCAL(void)
+build_ycc_rgb_table (j_decompress_ptr cinfo)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  int i;
+  INT32 x;
+  SHIFT_TEMPS
+
+  cconvert->Cr_r_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  cconvert->Cb_b_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  cconvert->Cr_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+  cconvert->Cb_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+
+  for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
+    /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
+    /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
+    /* Cr=>R value is nearest int to 1.40200 * x */
+    cconvert->Cr_r_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
+    /* Cb=>B value is nearest int to 1.77200 * x */
+    cconvert->Cb_b_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
+    /* Cr=>G value is scaled-up -0.71414 * x */
+    cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x;
+    /* Cb=>G value is scaled-up -0.34414 * x */
+    /* We also add in ONE_HALF so that need not do it in inner loop */
+    cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the output colorspace.
+ *
+ * Note that we change from noninterleaved, one-plane-per-component format
+ * to interleaved-pixel format.  The output buffer is therefore three times
+ * as wide as the input buffer.
+ * A starting row offset is provided only for the input buffer.  The caller
+ * can easily adjust the passed output_buf value to accommodate any row
+ * offset required on that side.
+ */
+
+METHODDEF(void)
+ycc_rgb_convert (j_decompress_ptr cinfo,
+		 JSAMPIMAGE input_buf, JDIMENSION input_row,
+		 JSAMPARRAY output_buf, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register int y, cb, cr;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+  /* copy these pointers into registers if possible */
+  register JSAMPLE * range_limit = cinfo->sample_range_limit;
+  register int * Crrtab = cconvert->Cr_r_tab;
+  register int * Cbbtab = cconvert->Cb_b_tab;
+  register INT32 * Crgtab = cconvert->Cr_g_tab;
+  register INT32 * Cbgtab = cconvert->Cb_g_tab;
+  SHIFT_TEMPS
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      y  = GETJSAMPLE(inptr0[col]);
+      cb = GETJSAMPLE(inptr1[col]);
+      cr = GETJSAMPLE(inptr2[col]);
+      /* Range-limiting is essential due to noise introduced by DCT losses. */
+      outptr[RGB_RED] =   range_limit[y + Crrtab[cr]];
+      outptr[RGB_GREEN] = range_limit[y +
+			      ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
+						 SCALEBITS))];
+      outptr[RGB_BLUE] =  range_limit[y + Cbbtab[cb]];
+      outptr += RGB_PIXELSIZE;
+    }
+  }
+}
+
+
+/**************** Cases other than YCbCr -> RGB **************/
+
+
+/*
+ * Initialize for RGB->grayscale colorspace conversion.
+ */
+
+LOCAL(void)
+build_rgb_y_table (j_decompress_ptr cinfo)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  INT32 * rgb_y_tab;
+  INT32 i;
+
+  /* Allocate and fill in the conversion tables. */
+  cconvert->rgb_y_tab = rgb_y_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(TABLE_SIZE * SIZEOF(INT32)));
+
+  for (i = 0; i <= MAXJSAMPLE; i++) {
+    rgb_y_tab[i+R_Y_OFF] = FIX(0.29900) * i;
+    rgb_y_tab[i+G_Y_OFF] = FIX(0.58700) * i;
+    rgb_y_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF;
+  }
+}
+
+
+/*
+ * Convert RGB to grayscale.
+ */
+
+METHODDEF(void)
+rgb_gray_convert (j_decompress_ptr cinfo,
+		  JSAMPIMAGE input_buf, JDIMENSION input_row,
+		  JSAMPARRAY output_buf, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register int r, g, b;
+  register INT32 * ctab = cconvert->rgb_y_tab;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr0[col]);
+      g = GETJSAMPLE(inptr1[col]);
+      b = GETJSAMPLE(inptr2[col]);
+      /* Y */
+      outptr[col] = (JSAMPLE)
+		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
+		 >> SCALEBITS);
+    }
+  }
+}
+
+
+/*
+ * No colorspace change, but conversion from separate-planes
+ * to interleaved representation.
+ */
+
+METHODDEF(void)
+rgb_convert (j_decompress_ptr cinfo,
+	     JSAMPIMAGE input_buf, JDIMENSION input_row,
+	     JSAMPARRAY output_buf, int num_rows)
+{
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      /* We can dispense with GETJSAMPLE() here */
+      outptr[RGB_RED]   = inptr0[col];
+      outptr[RGB_GREEN] = inptr1[col];
+      outptr[RGB_BLUE]  = inptr2[col];
+      outptr += RGB_PIXELSIZE;
+    }
+  }
+}
+
+
+/*
+ * Color conversion for no colorspace change: just copy the data,
+ * converting from separate-planes to interleaved representation.
+ */
+
+METHODDEF(void)
+null_convert (j_decompress_ptr cinfo,
+	      JSAMPIMAGE input_buf, JDIMENSION input_row,
+	      JSAMPARRAY output_buf, int num_rows)
+{
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION count;
+  register int num_components = cinfo->num_components;
+  JDIMENSION num_cols = cinfo->output_width;
+  int ci;
+
+  while (--num_rows >= 0) {
+    for (ci = 0; ci < num_components; ci++) {
+      inptr = input_buf[ci][input_row];
+      outptr = output_buf[0] + ci;
+      for (count = num_cols; count > 0; count--) {
+	*outptr = *inptr++;	/* needn't bother with GETJSAMPLE() here */
+	outptr += num_components;
+      }
+    }
+    input_row++;
+    output_buf++;
+  }
+}
+
+
+/*
+ * Color conversion for grayscale: just copy the data.
+ * This also works for YCbCr -> grayscale conversion, in which
+ * we just copy the Y (luminance) component and ignore chrominance.
+ */
+
+METHODDEF(void)
+grayscale_convert (j_decompress_ptr cinfo,
+		   JSAMPIMAGE input_buf, JDIMENSION input_row,
+		   JSAMPARRAY output_buf, int num_rows)
+{
+  jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0,
+		    num_rows, cinfo->output_width);
+}
+
+
+/*
+ * Convert grayscale to RGB: just duplicate the graylevel three times.
+ * This is provided to support applications that don't want to cope
+ * with grayscale as a separate case.
+ */
+
+METHODDEF(void)
+gray_rgb_convert (j_decompress_ptr cinfo,
+		  JSAMPIMAGE input_buf, JDIMENSION input_row,
+		  JSAMPARRAY output_buf, int num_rows)
+{
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr = input_buf[0][input_row++];
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      /* We can dispense with GETJSAMPLE() here */
+      outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col];
+      outptr += RGB_PIXELSIZE;
+    }
+  }
+}
+
+
+/*
+ * Adobe-style YCCK->CMYK conversion.
+ * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same
+ * conversion as above, while passing K (black) unchanged.
+ * We assume build_ycc_rgb_table has been called.
+ */
+
+METHODDEF(void)
+ycck_cmyk_convert (j_decompress_ptr cinfo,
+		   JSAMPIMAGE input_buf, JDIMENSION input_row,
+		   JSAMPARRAY output_buf, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register int y, cb, cr;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2, inptr3;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+  /* copy these pointers into registers if possible */
+  register JSAMPLE * range_limit = cinfo->sample_range_limit;
+  register int * Crrtab = cconvert->Cr_r_tab;
+  register int * Cbbtab = cconvert->Cb_b_tab;
+  register INT32 * Crgtab = cconvert->Cr_g_tab;
+  register INT32 * Cbgtab = cconvert->Cb_g_tab;
+  SHIFT_TEMPS
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    inptr3 = input_buf[3][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      y  = GETJSAMPLE(inptr0[col]);
+      cb = GETJSAMPLE(inptr1[col]);
+      cr = GETJSAMPLE(inptr2[col]);
+      /* Range-limiting is essential due to noise introduced by DCT losses. */
+      outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])];	/* red */
+      outptr[1] = range_limit[MAXJSAMPLE - (y +			/* green */
+			      ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
+						 SCALEBITS)))];
+      outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])];	/* blue */
+      /* K passes through unchanged */
+      outptr[3] = inptr3[col];	/* don't need GETJSAMPLE here */
+      outptr += 4;
+    }
+  }
+}
+
+
+/*
+ * Empty method for start_pass.
+ */
+
+METHODDEF(void)
+start_pass_dcolor (j_decompress_ptr cinfo)
+{
+  /* no work needed */
+}
+
+
+/*
+ * Module initialization routine for output colorspace conversion.
+ */
+
+GLOBAL(void)
+jinit_color_deconverter (j_decompress_ptr cinfo)
+{
+  my_cconvert_ptr cconvert;
+  int ci;
+
+  cconvert = (my_cconvert_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_color_deconverter));
+  cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert;
+  cconvert->pub.start_pass = start_pass_dcolor;
+
+  /* Make sure num_components agrees with jpeg_color_space */
+  switch (cinfo->jpeg_color_space) {
+  case JCS_GRAYSCALE:
+    if (cinfo->num_components != 1)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    break;
+
+  case JCS_RGB:
+  case JCS_YCbCr:
+    if (cinfo->num_components != 3)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    break;
+
+  case JCS_CMYK:
+  case JCS_YCCK:
+    if (cinfo->num_components != 4)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    break;
+
+  default:			/* JCS_UNKNOWN can be anything */
+    if (cinfo->num_components < 1)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    break;
+  }
+
+  /* Set out_color_components and conversion method based on requested space.
+   * Also clear the component_needed flags for any unused components,
+   * so that earlier pipeline stages can avoid useless computation.
+   */
+
+  switch (cinfo->out_color_space) {
+  case JCS_GRAYSCALE:
+    cinfo->out_color_components = 1;
+    if (cinfo->jpeg_color_space == JCS_GRAYSCALE ||
+	cinfo->jpeg_color_space == JCS_YCbCr) {
+      cconvert->pub.color_convert = grayscale_convert;
+      /* For color->grayscale conversion, only the Y (0) component is needed */
+      for (ci = 1; ci < cinfo->num_components; ci++)
+	cinfo->comp_info[ci].component_needed = FALSE;
+    } else if (cinfo->jpeg_color_space == JCS_RGB) {
+      cconvert->pub.color_convert = rgb_gray_convert;
+      build_rgb_y_table(cinfo);
+    } else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  case JCS_RGB:
+    cinfo->out_color_components = RGB_PIXELSIZE;
+    if (cinfo->jpeg_color_space == JCS_YCbCr) {
+      cconvert->pub.color_convert = ycc_rgb_convert;
+      build_ycc_rgb_table(cinfo);
+    } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
+      cconvert->pub.color_convert = gray_rgb_convert;
+    } else if (cinfo->jpeg_color_space == JCS_RGB) {
+      cconvert->pub.color_convert = rgb_convert;
+    } else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  case JCS_CMYK:
+    cinfo->out_color_components = 4;
+    if (cinfo->jpeg_color_space == JCS_YCCK) {
+      cconvert->pub.color_convert = ycck_cmyk_convert;
+      build_ycc_rgb_table(cinfo);
+    } else if (cinfo->jpeg_color_space == JCS_CMYK) {
+      cconvert->pub.color_convert = null_convert;
+    } else
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+
+  default:
+    /* Permit null conversion to same output space */
+    if (cinfo->out_color_space == cinfo->jpeg_color_space) {
+      cinfo->out_color_components = cinfo->num_components;
+      cconvert->pub.color_convert = null_convert;
+    } else			/* unsupported non-null conversion */
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    break;
+  }
+
+  if (cinfo->quantize_colors)
+    cinfo->output_components = 1; /* single colormapped output component */
+  else
+    cinfo->output_components = cinfo->out_color_components;
+}
diff --git a/jpeg-8d/jdct.h b/jpeg-8d/jdct.h
new file mode 100644
index 0000000..360dec8
--- /dev/null
+++ b/jpeg-8d/jdct.h
@@ -0,0 +1,393 @@
+/*
+ * jdct.h
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This include file contains common declarations for the forward and
+ * inverse DCT modules.  These declarations are private to the DCT managers
+ * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms.
+ * The individual DCT algorithms are kept in separate files to ease 
+ * machine-dependent tuning (e.g., assembly coding).
+ */
+
+
+/*
+ * A forward DCT routine is given a pointer to an input sample array and
+ * a pointer to a work area of type DCTELEM[]; the DCT is to be performed
+ * in-place in that buffer.  Type DCTELEM is int for 8-bit samples, INT32
+ * for 12-bit samples.  (NOTE: Floating-point DCT implementations use an
+ * array of type FAST_FLOAT, instead.)
+ * The input data is to be fetched from the sample array starting at a
+ * specified column.  (Any row offset needed will be applied to the array
+ * pointer before it is passed to the FDCT code.)
+ * Note that the number of samples fetched by the FDCT routine is
+ * DCT_h_scaled_size * DCT_v_scaled_size.
+ * The DCT outputs are returned scaled up by a factor of 8; they therefore
+ * have a range of +-8K for 8-bit data, +-128K for 12-bit data.  This
+ * convention improves accuracy in integer implementations and saves some
+ * work in floating-point ones.
+ * Quantization of the output coefficients is done by jcdctmgr.c.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+typedef int DCTELEM;		/* 16 or 32 bits is fine */
+#else
+typedef INT32 DCTELEM;		/* must have 32 bits */
+#endif
+
+typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data,
+					       JSAMPARRAY sample_data,
+					       JDIMENSION start_col));
+typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data,
+					     JSAMPARRAY sample_data,
+					     JDIMENSION start_col));
+
+
+/*
+ * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer
+ * to an output sample array.  The routine must dequantize the input data as
+ * well as perform the IDCT; for dequantization, it uses the multiplier table
+ * pointed to by compptr->dct_table.  The output data is to be placed into the
+ * sample array starting at a specified column.  (Any row offset needed will
+ * be applied to the array pointer before it is passed to the IDCT code.)
+ * Note that the number of samples emitted by the IDCT routine is
+ * DCT_h_scaled_size * DCT_v_scaled_size.
+ */
+
+/* typedef inverse_DCT_method_ptr is declared in jpegint.h */
+
+/*
+ * Each IDCT routine has its own ideas about the best dct_table element type.
+ */
+
+typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */
+#if BITS_IN_JSAMPLE == 8
+typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */
+#define IFAST_SCALE_BITS  2	/* fractional bits in scale factors */
+#else
+typedef INT32 IFAST_MULT_TYPE;	/* need 32 bits for scaled quantizers */
+#define IFAST_SCALE_BITS  13	/* fractional bits in scale factors */
+#endif
+typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */
+
+
+/*
+ * Each IDCT routine is responsible for range-limiting its results and
+ * converting them to unsigned form (0..MAXJSAMPLE).  The raw outputs could
+ * be quite far out of range if the input data is corrupt, so a bulletproof
+ * range-limiting step is required.  We use a mask-and-table-lookup method
+ * to do the combined operations quickly.  See the comments with
+ * prepare_range_limit_table (in jdmaster.c) for more info.
+ */
+
+#define IDCT_range_limit(cinfo)  ((cinfo)->sample_range_limit + CENTERJSAMPLE)
+
+#define RANGE_MASK  (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */
+
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jpeg_fdct_islow		jFDislow
+#define jpeg_fdct_ifast		jFDifast
+#define jpeg_fdct_float		jFDfloat
+#define jpeg_fdct_7x7		jFD7x7
+#define jpeg_fdct_6x6		jFD6x6
+#define jpeg_fdct_5x5		jFD5x5
+#define jpeg_fdct_4x4		jFD4x4
+#define jpeg_fdct_3x3		jFD3x3
+#define jpeg_fdct_2x2		jFD2x2
+#define jpeg_fdct_1x1		jFD1x1
+#define jpeg_fdct_9x9		jFD9x9
+#define jpeg_fdct_10x10		jFD10x10
+#define jpeg_fdct_11x11		jFD11x11
+#define jpeg_fdct_12x12		jFD12x12
+#define jpeg_fdct_13x13		jFD13x13
+#define jpeg_fdct_14x14		jFD14x14
+#define jpeg_fdct_15x15		jFD15x15
+#define jpeg_fdct_16x16		jFD16x16
+#define jpeg_fdct_16x8		jFD16x8
+#define jpeg_fdct_14x7		jFD14x7
+#define jpeg_fdct_12x6		jFD12x6
+#define jpeg_fdct_10x5		jFD10x5
+#define jpeg_fdct_8x4		jFD8x4
+#define jpeg_fdct_6x3		jFD6x3
+#define jpeg_fdct_4x2		jFD4x2
+#define jpeg_fdct_2x1		jFD2x1
+#define jpeg_fdct_8x16		jFD8x16
+#define jpeg_fdct_7x14		jFD7x14
+#define jpeg_fdct_6x12		jFD6x12
+#define jpeg_fdct_5x10		jFD5x10
+#define jpeg_fdct_4x8		jFD4x8
+#define jpeg_fdct_3x6		jFD3x6
+#define jpeg_fdct_2x4		jFD2x4
+#define jpeg_fdct_1x2		jFD1x2
+#define jpeg_idct_islow		jRDislow
+#define jpeg_idct_ifast		jRDifast
+#define jpeg_idct_float		jRDfloat
+#define jpeg_idct_7x7		jRD7x7
+#define jpeg_idct_6x6		jRD6x6
+#define jpeg_idct_5x5		jRD5x5
+#define jpeg_idct_4x4		jRD4x4
+#define jpeg_idct_3x3		jRD3x3
+#define jpeg_idct_2x2		jRD2x2
+#define jpeg_idct_1x1		jRD1x1
+#define jpeg_idct_9x9		jRD9x9
+#define jpeg_idct_10x10		jRD10x10
+#define jpeg_idct_11x11		jRD11x11
+#define jpeg_idct_12x12		jRD12x12
+#define jpeg_idct_13x13		jRD13x13
+#define jpeg_idct_14x14		jRD14x14
+#define jpeg_idct_15x15		jRD15x15
+#define jpeg_idct_16x16		jRD16x16
+#define jpeg_idct_16x8		jRD16x8
+#define jpeg_idct_14x7		jRD14x7
+#define jpeg_idct_12x6		jRD12x6
+#define jpeg_idct_10x5		jRD10x5
+#define jpeg_idct_8x4		jRD8x4
+#define jpeg_idct_6x3		jRD6x3
+#define jpeg_idct_4x2		jRD4x2
+#define jpeg_idct_2x1		jRD2x1
+#define jpeg_idct_8x16		jRD8x16
+#define jpeg_idct_7x14		jRD7x14
+#define jpeg_idct_6x12		jRD6x12
+#define jpeg_idct_5x10		jRD5x10
+#define jpeg_idct_4x8		jRD4x8
+#define jpeg_idct_3x6		jRD3x8
+#define jpeg_idct_2x4		jRD2x4
+#define jpeg_idct_1x2		jRD1x2
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+/* Extern declarations for the forward and inverse DCT routines. */
+
+EXTERN(void) jpeg_fdct_islow
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_ifast
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_float
+    JPP((FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_7x7
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_6x6
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_5x5
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_4x4
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_3x3
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_2x2
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_1x1
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_9x9
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_10x10
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_11x11
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_12x12
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_13x13
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_14x14
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_15x15
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_16x16
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_16x8
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_14x7
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_12x6
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_10x5
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_8x4
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_6x3
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_4x2
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_2x1
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_8x16
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_7x14
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_6x12
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_5x10
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_4x8
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_3x6
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_2x4
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_1x2
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+
+EXTERN(void) jpeg_idct_islow
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_ifast
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_float
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_7x7
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_6x6
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_5x5
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_4x4
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_3x3
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_2x2
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_1x1
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_9x9
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_10x10
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_11x11
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_12x12
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_13x13
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_14x14
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_15x15
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_16x16
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_16x8
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_14x7
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_12x6
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_10x5
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_8x4
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_6x3
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_4x2
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_2x1
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_8x16
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_7x14
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_6x12
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_5x10
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_4x8
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_3x6
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_2x4
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_1x2
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+
+
+/*
+ * Macros for handling fixed-point arithmetic; these are used by many
+ * but not all of the DCT/IDCT modules.
+ *
+ * All values are expected to be of type INT32.
+ * Fractional constants are scaled left by CONST_BITS bits.
+ * CONST_BITS is defined within each module using these macros,
+ * and may differ from one module to the next.
+ */
+
+#define ONE	((INT32) 1)
+#define CONST_SCALE (ONE << CONST_BITS)
+
+/* Convert a positive real constant to an integer scaled by CONST_SCALE.
+ * Caution: some C compilers fail to reduce "FIX(constant)" at compile time,
+ * thus causing a lot of useless floating-point operations at run time.
+ */
+
+#define FIX(x)	((INT32) ((x) * CONST_SCALE + 0.5))
+
+/* Descale and correctly round an INT32 value that's scaled by N bits.
+ * We assume RIGHT_SHIFT rounds towards minus infinity, so adding
+ * the fudge factor is correct for either sign of X.
+ */
+
+#define DESCALE(x,n)  RIGHT_SHIFT((x) + (ONE << ((n)-1)), n)
+
+/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result.
+ * This macro is used only when the two inputs will actually be no more than
+ * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a
+ * full 32x32 multiply.  This provides a useful speedup on many machines.
+ * Unfortunately there is no way to specify a 16x16->32 multiply portably
+ * in C, but some C compilers will do the right thing if you provide the
+ * correct combination of casts.
+ */
+
+#ifdef SHORTxSHORT_32		/* may work if 'int' is 32 bits */
+#define MULTIPLY16C16(var,const)  (((INT16) (var)) * ((INT16) (const)))
+#endif
+#ifdef SHORTxLCONST_32		/* known to work with Microsoft C 6.0 */
+#define MULTIPLY16C16(var,const)  (((INT16) (var)) * ((INT32) (const)))
+#endif
+
+#ifndef MULTIPLY16C16		/* default definition */
+#define MULTIPLY16C16(var,const)  ((var) * (const))
+#endif
+
+/* Same except both inputs are variables. */
+
+#ifdef SHORTxSHORT_32		/* may work if 'int' is 32 bits */
+#define MULTIPLY16V16(var1,var2)  (((INT16) (var1)) * ((INT16) (var2)))
+#endif
+
+#ifndef MULTIPLY16V16		/* default definition */
+#define MULTIPLY16V16(var1,var2)  ((var1) * (var2))
+#endif
diff --git a/jpeg-8d/jddctmgr.c b/jpeg-8d/jddctmgr.c
new file mode 100644
index 0000000..0ded9d5
--- /dev/null
+++ b/jpeg-8d/jddctmgr.c
@@ -0,0 +1,384 @@
+/*
+ * jddctmgr.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2002-2010 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the inverse-DCT management logic.
+ * This code selects a particular IDCT implementation to be used,
+ * and it performs related housekeeping chores.  No code in this file
+ * is executed per IDCT step, only during output pass setup.
+ *
+ * Note that the IDCT routines are responsible for performing coefficient
+ * dequantization as well as the IDCT proper.  This module sets up the
+ * dequantization multiplier table needed by the IDCT routine.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+
+/*
+ * The decompressor input side (jdinput.c) saves away the appropriate
+ * quantization table for each component at the start of the first scan
+ * involving that component.  (This is necessary in order to correctly
+ * decode files that reuse Q-table slots.)
+ * When we are ready to make an output pass, the saved Q-table is converted
+ * to a multiplier table that will actually be used by the IDCT routine.
+ * The multiplier table contents are IDCT-method-dependent.  To support
+ * application changes in IDCT method between scans, we can remake the
+ * multiplier tables if necessary.
+ * In buffered-image mode, the first output pass may occur before any data
+ * has been seen for some components, and thus before their Q-tables have
+ * been saved away.  To handle this case, multiplier tables are preset
+ * to zeroes; the result of the IDCT will be a neutral gray level.
+ */
+
+
+/* Private subobject for this module */
+
+typedef struct {
+  struct jpeg_inverse_dct pub;	/* public fields */
+
+  /* This array contains the IDCT method code that each multiplier table
+   * is currently set up for, or -1 if it's not yet set up.
+   * The actual multiplier tables are pointed to by dct_table in the
+   * per-component comp_info structures.
+   */
+  int cur_method[MAX_COMPONENTS];
+} my_idct_controller;
+
+typedef my_idct_controller * my_idct_ptr;
+
+
+/* Allocated multiplier tables: big enough for any supported variant */
+
+typedef union {
+  ISLOW_MULT_TYPE islow_array[DCTSIZE2];
+#ifdef DCT_IFAST_SUPPORTED
+  IFAST_MULT_TYPE ifast_array[DCTSIZE2];
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  FLOAT_MULT_TYPE float_array[DCTSIZE2];
+#endif
+} multiplier_table;
+
+
+/* The current scaled-IDCT routines require ISLOW-style multiplier tables,
+ * so be sure to compile that code if either ISLOW or SCALING is requested.
+ */
+#ifdef DCT_ISLOW_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#else
+#ifdef IDCT_SCALING_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#endif
+#endif
+
+
+/*
+ * Prepare for an output pass.
+ * Here we select the proper IDCT routine for each component and build
+ * a matching multiplier table.
+ */
+
+METHODDEF(void)
+start_pass (j_decompress_ptr cinfo)
+{
+  my_idct_ptr idct = (my_idct_ptr) cinfo->idct;
+  int ci, i;
+  jpeg_component_info *compptr;
+  int method = 0;
+  inverse_DCT_method_ptr method_ptr = NULL;
+  JQUANT_TBL * qtbl;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Select the proper IDCT routine for this component's scaling */
+    switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) {
+#ifdef IDCT_SCALING_SUPPORTED
+    case ((1 << 8) + 1):
+      method_ptr = jpeg_idct_1x1;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((2 << 8) + 2):
+      method_ptr = jpeg_idct_2x2;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((3 << 8) + 3):
+      method_ptr = jpeg_idct_3x3;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((4 << 8) + 4):
+      method_ptr = jpeg_idct_4x4;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((5 << 8) + 5):
+      method_ptr = jpeg_idct_5x5;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((6 << 8) + 6):
+      method_ptr = jpeg_idct_6x6;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((7 << 8) + 7):
+      method_ptr = jpeg_idct_7x7;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((9 << 8) + 9):
+      method_ptr = jpeg_idct_9x9;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((10 << 8) + 10):
+      method_ptr = jpeg_idct_10x10;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((11 << 8) + 11):
+      method_ptr = jpeg_idct_11x11;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((12 << 8) + 12):
+      method_ptr = jpeg_idct_12x12;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((13 << 8) + 13):
+      method_ptr = jpeg_idct_13x13;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((14 << 8) + 14):
+      method_ptr = jpeg_idct_14x14;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((15 << 8) + 15):
+      method_ptr = jpeg_idct_15x15;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((16 << 8) + 16):
+      method_ptr = jpeg_idct_16x16;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((16 << 8) + 8):
+      method_ptr = jpeg_idct_16x8;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((14 << 8) + 7):
+      method_ptr = jpeg_idct_14x7;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((12 << 8) + 6):
+      method_ptr = jpeg_idct_12x6;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((10 << 8) + 5):
+      method_ptr = jpeg_idct_10x5;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((8 << 8) + 4):
+      method_ptr = jpeg_idct_8x4;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((6 << 8) + 3):
+      method_ptr = jpeg_idct_6x3;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((4 << 8) + 2):
+      method_ptr = jpeg_idct_4x2;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((2 << 8) + 1):
+      method_ptr = jpeg_idct_2x1;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((8 << 8) + 16):
+      method_ptr = jpeg_idct_8x16;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((7 << 8) + 14):
+      method_ptr = jpeg_idct_7x14;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((6 << 8) + 12):
+      method_ptr = jpeg_idct_6x12;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((5 << 8) + 10):
+      method_ptr = jpeg_idct_5x10;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((4 << 8) + 8):
+      method_ptr = jpeg_idct_4x8;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((3 << 8) + 6):
+      method_ptr = jpeg_idct_3x6;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((2 << 8) + 4):
+      method_ptr = jpeg_idct_2x4;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((1 << 8) + 2):
+      method_ptr = jpeg_idct_1x2;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+#endif
+    case ((DCTSIZE << 8) + DCTSIZE):
+      switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+      case JDCT_ISLOW:
+	method_ptr = jpeg_idct_islow;
+	method = JDCT_ISLOW;
+	break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+      case JDCT_IFAST:
+	method_ptr = jpeg_idct_ifast;
+	method = JDCT_IFAST;
+	break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+      case JDCT_FLOAT:
+	method_ptr = jpeg_idct_float;
+	method = JDCT_FLOAT;
+	break;
+#endif
+      default:
+	ERREXIT(cinfo, JERR_NOT_COMPILED);
+	break;
+      }
+      break;
+    default:
+      ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
+	       compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size);
+      break;
+    }
+    idct->pub.inverse_DCT[ci] = method_ptr;
+    /* Create multiplier table from quant table.
+     * However, we can skip this if the component is uninteresting
+     * or if we already built the table.  Also, if no quant table
+     * has yet been saved for the component, we leave the
+     * multiplier table all-zero; we'll be reading zeroes from the
+     * coefficient controller's buffer anyway.
+     */
+    if (! compptr->component_needed || idct->cur_method[ci] == method)
+      continue;
+    qtbl = compptr->quant_table;
+    if (qtbl == NULL)		/* happens if no data yet for component */
+      continue;
+    idct->cur_method[ci] = method;
+    switch (method) {
+#ifdef PROVIDE_ISLOW_TABLES
+    case JDCT_ISLOW:
+      {
+	/* For LL&M IDCT method, multipliers are equal to raw quantization
+	 * coefficients, but are stored as ints to ensure access efficiency.
+	 */
+	ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table;
+	for (i = 0; i < DCTSIZE2; i++) {
+	  ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i];
+	}
+      }
+      break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+    case JDCT_IFAST:
+      {
+	/* For AA&N IDCT method, multipliers are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * For integer operation, the multiplier table is to be scaled by
+	 * IFAST_SCALE_BITS.
+	 */
+	IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table;
+#define CONST_BITS 14
+	static const INT16 aanscales[DCTSIZE2] = {
+	  /* precomputed values scaled up by 14 bits */
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
+	  21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
+	  19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
+	   8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
+	   4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
+	};
+	SHIFT_TEMPS
+
+	for (i = 0; i < DCTSIZE2; i++) {
+	  ifmtbl[i] = (IFAST_MULT_TYPE)
+	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
+				  (INT32) aanscales[i]),
+		    CONST_BITS-IFAST_SCALE_BITS);
+	}
+      }
+      break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+    case JDCT_FLOAT:
+      {
+	/* For float AA&N IDCT method, multipliers are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * We apply a further scale factor of 1/8.
+	 */
+	FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table;
+	int row, col;
+	static const double aanscalefactor[DCTSIZE] = {
+	  1.0, 1.387039845, 1.306562965, 1.175875602,
+	  1.0, 0.785694958, 0.541196100, 0.275899379
+	};
+
+	i = 0;
+	for (row = 0; row < DCTSIZE; row++) {
+	  for (col = 0; col < DCTSIZE; col++) {
+	    fmtbl[i] = (FLOAT_MULT_TYPE)
+	      ((double) qtbl->quantval[i] *
+	       aanscalefactor[row] * aanscalefactor[col] * 0.125);
+	    i++;
+	  }
+	}
+      }
+      break;
+#endif
+    default:
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+      break;
+    }
+  }
+}
+
+
+/*
+ * Initialize IDCT manager.
+ */
+
+GLOBAL(void)
+jinit_inverse_dct (j_decompress_ptr cinfo)
+{
+  my_idct_ptr idct;
+  int ci;
+  jpeg_component_info *compptr;
+
+  idct = (my_idct_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_idct_controller));
+  cinfo->idct = (struct jpeg_inverse_dct *) idct;
+  idct->pub.start_pass = start_pass;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Allocate and pre-zero a multiplier table for each component */
+    compptr->dct_table =
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(multiplier_table));
+    MEMZERO(compptr->dct_table, SIZEOF(multiplier_table));
+    /* Mark multiplier table not yet set up for any method */
+    idct->cur_method[ci] = -1;
+  }
+}
diff --git a/jpeg-8d/jdhuff.c b/jpeg-8d/jdhuff.c
new file mode 100644
index 0000000..06f92fe
--- /dev/null
+++ b/jpeg-8d/jdhuff.c
@@ -0,0 +1,1541 @@
+/*
+ * jdhuff.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2006-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains Huffman entropy decoding routines.
+ * Both sequential and progressive modes are supported in this single module.
+ *
+ * Much of the complexity here has to do with supporting input suspension.
+ * If the data source module demands suspension, we want to be able to back
+ * up to the start of the current MCU.  To do this, we copy state variables
+ * into local working storage, and update them back to the permanent
+ * storage only upon successful completion of an MCU.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Derived data constructed for each Huffman table */
+
+#define HUFF_LOOKAHEAD	8	/* # of bits of lookahead */
+
+typedef struct {
+  /* Basic tables: (element [0] of each array is unused) */
+  INT32 maxcode[18];		/* largest code of length k (-1 if none) */
+  /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */
+  INT32 valoffset[17];		/* huffval[] offset for codes of length k */
+  /* valoffset[k] = huffval[] index of 1st symbol of code length k, less
+   * the smallest code of length k; so given a code of length k, the
+   * corresponding symbol is huffval[code + valoffset[k]]
+   */
+
+  /* Link to public Huffman table (needed only in jpeg_huff_decode) */
+  JHUFF_TBL *pub;
+
+  /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of
+   * the input data stream.  If the next Huffman code is no more
+   * than HUFF_LOOKAHEAD bits long, we can obtain its length and
+   * the corresponding symbol directly from these tables.
+   */
+  int look_nbits[1<<HUFF_LOOKAHEAD]; /* # bits, or 0 if too long */
+  UINT8 look_sym[1<<HUFF_LOOKAHEAD]; /* symbol, or unused */
+} d_derived_tbl;
+
+
+/*
+ * Fetching the next N bits from the input stream is a time-critical operation
+ * for the Huffman decoders.  We implement it with a combination of inline
+ * macros and out-of-line subroutines.  Note that N (the number of bits
+ * demanded at one time) never exceeds 15 for JPEG use.
+ *
+ * We read source bytes into get_buffer and dole out bits as needed.
+ * If get_buffer already contains enough bits, they are fetched in-line
+ * by the macros CHECK_BIT_BUFFER and GET_BITS.  When there aren't enough
+ * bits, jpeg_fill_bit_buffer is called; it will attempt to fill get_buffer
+ * as full as possible (not just to the number of bits needed; this
+ * prefetching reduces the overhead cost of calling jpeg_fill_bit_buffer).
+ * Note that jpeg_fill_bit_buffer may return FALSE to indicate suspension.
+ * On TRUE return, jpeg_fill_bit_buffer guarantees that get_buffer contains
+ * at least the requested number of bits --- dummy zeroes are inserted if
+ * necessary.
+ */
+
+typedef INT32 bit_buf_type;	/* type of bit-extraction buffer */
+#define BIT_BUF_SIZE  32	/* size of buffer in bits */
+
+/* If long is > 32 bits on your machine, and shifting/masking longs is
+ * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE
+ * appropriately should be a win.  Unfortunately we can't define the size
+ * with something like  #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8)
+ * because not all machines measure sizeof in 8-bit bytes.
+ */
+
+typedef struct {		/* Bitreading state saved across MCUs */
+  bit_buf_type get_buffer;	/* current bit-extraction buffer */
+  int bits_left;		/* # of unused bits in it */
+} bitread_perm_state;
+
+typedef struct {		/* Bitreading working state within an MCU */
+  /* Current data source location */
+  /* We need a copy, rather than munging the original, in case of suspension */
+  const JOCTET * next_input_byte; /* => next byte to read from source */
+  size_t bytes_in_buffer;	/* # of bytes remaining in source buffer */
+  /* Bit input buffer --- note these values are kept in register variables,
+   * not in this struct, inside the inner loops.
+   */
+  bit_buf_type get_buffer;	/* current bit-extraction buffer */
+  int bits_left;		/* # of unused bits in it */
+  /* Pointer needed by jpeg_fill_bit_buffer. */
+  j_decompress_ptr cinfo;	/* back link to decompress master record */
+} bitread_working_state;
+
+/* Macros to declare and load/save bitread local variables. */
+#define BITREAD_STATE_VARS  \
+	register bit_buf_type get_buffer;  \
+	register int bits_left;  \
+	bitread_working_state br_state
+
+#define BITREAD_LOAD_STATE(cinfop,permstate)  \
+	br_state.cinfo = cinfop; \
+	br_state.next_input_byte = cinfop->src->next_input_byte; \
+	br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \
+	get_buffer = permstate.get_buffer; \
+	bits_left = permstate.bits_left;
+
+#define BITREAD_SAVE_STATE(cinfop,permstate)  \
+	cinfop->src->next_input_byte = br_state.next_input_byte; \
+	cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \
+	permstate.get_buffer = get_buffer; \
+	permstate.bits_left = bits_left
+
+/*
+ * These macros provide the in-line portion of bit fetching.
+ * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer
+ * before using GET_BITS, PEEK_BITS, or DROP_BITS.
+ * The variables get_buffer and bits_left are assumed to be locals,
+ * but the state struct might not be (jpeg_huff_decode needs this).
+ *	CHECK_BIT_BUFFER(state,n,action);
+ *		Ensure there are N bits in get_buffer; if suspend, take action.
+ *      val = GET_BITS(n);
+ *		Fetch next N bits.
+ *      val = PEEK_BITS(n);
+ *		Fetch next N bits without removing them from the buffer.
+ *	DROP_BITS(n);
+ *		Discard next N bits.
+ * The value N should be a simple variable, not an expression, because it
+ * is evaluated multiple times.
+ */
+
+#define CHECK_BIT_BUFFER(state,nbits,action) \
+	{ if (bits_left < (nbits)) {  \
+	    if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits))  \
+	      { action; }  \
+	    get_buffer = (state).get_buffer; bits_left = (state).bits_left; } }
+
+#define GET_BITS(nbits) \
+	(((int) (get_buffer >> (bits_left -= (nbits)))) & BIT_MASK(nbits))
+
+#define PEEK_BITS(nbits) \
+	(((int) (get_buffer >> (bits_left -  (nbits)))) & BIT_MASK(nbits))
+
+#define DROP_BITS(nbits) \
+	(bits_left -= (nbits))
+
+
+/*
+ * Code for extracting next Huffman-coded symbol from input bit stream.
+ * Again, this is time-critical and we make the main paths be macros.
+ *
+ * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits
+ * without looping.  Usually, more than 95% of the Huffman codes will be 8
+ * or fewer bits long.  The few overlength codes are handled with a loop,
+ * which need not be inline code.
+ *
+ * Notes about the HUFF_DECODE macro:
+ * 1. Near the end of the data segment, we may fail to get enough bits
+ *    for a lookahead.  In that case, we do it the hard way.
+ * 2. If the lookahead table contains no entry, the next code must be
+ *    more than HUFF_LOOKAHEAD bits long.
+ * 3. jpeg_huff_decode returns -1 if forced to suspend.
+ */
+
+#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \
+{ register int nb, look; \
+  if (bits_left < HUFF_LOOKAHEAD) { \
+    if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \
+    get_buffer = state.get_buffer; bits_left = state.bits_left; \
+    if (bits_left < HUFF_LOOKAHEAD) { \
+      nb = 1; goto slowlabel; \
+    } \
+  } \
+  look = PEEK_BITS(HUFF_LOOKAHEAD); \
+  if ((nb = htbl->look_nbits[look]) != 0) { \
+    DROP_BITS(nb); \
+    result = htbl->look_sym[look]; \
+  } else { \
+    nb = HUFF_LOOKAHEAD+1; \
+slowlabel: \
+    if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \
+	{ failaction; } \
+    get_buffer = state.get_buffer; bits_left = state.bits_left; \
+  } \
+}
+
+
+/*
+ * Expanded entropy decoder object for Huffman decoding.
+ *
+ * The savable_state subrecord contains fields that change within an MCU,
+ * but must not be updated permanently until we complete the MCU.
+ */
+
+typedef struct {
+  unsigned int EOBRUN;			/* remaining EOBs in EOBRUN */
+  int last_dc_val[MAX_COMPS_IN_SCAN];	/* last DC coef for each component */
+} savable_state;
+
+/* This macro is to work around compilers with missing or broken
+ * structure assignment.  You'll need to fix this code if you have
+ * such a compiler and you change MAX_COMPS_IN_SCAN.
+ */
+
+#ifndef NO_STRUCT_ASSIGN
+#define ASSIGN_STATE(dest,src)  ((dest) = (src))
+#else
+#if MAX_COMPS_IN_SCAN == 4
+#define ASSIGN_STATE(dest,src)  \
+	((dest).EOBRUN = (src).EOBRUN, \
+	 (dest).last_dc_val[0] = (src).last_dc_val[0], \
+	 (dest).last_dc_val[1] = (src).last_dc_val[1], \
+	 (dest).last_dc_val[2] = (src).last_dc_val[2], \
+	 (dest).last_dc_val[3] = (src).last_dc_val[3])
+#endif
+#endif
+
+
+typedef struct {
+  struct jpeg_entropy_decoder pub; /* public fields */
+
+  /* These fields are loaded into local variables at start of each MCU.
+   * In case of suspension, we exit WITHOUT updating them.
+   */
+  bitread_perm_state bitstate;	/* Bit buffer at start of MCU */
+  savable_state saved;		/* Other state at start of MCU */
+
+  /* These fields are NOT loaded into local working state. */
+  boolean insufficient_data;	/* set TRUE after emitting warning */
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+
+  /* Following two fields used only in progressive mode */
+
+  /* Pointers to derived tables (these workspaces have image lifespan) */
+  d_derived_tbl * derived_tbls[NUM_HUFF_TBLS];
+
+  d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */
+
+  /* Following fields used only in sequential mode */
+
+  /* Pointers to derived tables (these workspaces have image lifespan) */
+  d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS];
+  d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS];
+
+  /* Precalculated info set up by start_pass for use in decode_mcu: */
+
+  /* Pointers to derived tables to be used for each block within an MCU */
+  d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU];
+  d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU];
+  /* Whether we care about the DC and AC coefficient values for each block */
+  int coef_limit[D_MAX_BLOCKS_IN_MCU];
+} huff_entropy_decoder;
+
+typedef huff_entropy_decoder * huff_entropy_ptr;
+
+
+static const int jpeg_zigzag_order[8][8] = {
+  {  0,  1,  5,  6, 14, 15, 27, 28 },
+  {  2,  4,  7, 13, 16, 26, 29, 42 },
+  {  3,  8, 12, 17, 25, 30, 41, 43 },
+  {  9, 11, 18, 24, 31, 40, 44, 53 },
+  { 10, 19, 23, 32, 39, 45, 52, 54 },
+  { 20, 22, 33, 38, 46, 51, 55, 60 },
+  { 21, 34, 37, 47, 50, 56, 59, 61 },
+  { 35, 36, 48, 49, 57, 58, 62, 63 }
+};
+
+static const int jpeg_zigzag_order7[7][7] = {
+  {  0,  1,  5,  6, 14, 15, 27 },
+  {  2,  4,  7, 13, 16, 26, 28 },
+  {  3,  8, 12, 17, 25, 29, 38 },
+  {  9, 11, 18, 24, 30, 37, 39 },
+  { 10, 19, 23, 31, 36, 40, 45 },
+  { 20, 22, 32, 35, 41, 44, 46 },
+  { 21, 33, 34, 42, 43, 47, 48 }
+};
+
+static const int jpeg_zigzag_order6[6][6] = {
+  {  0,  1,  5,  6, 14, 15 },
+  {  2,  4,  7, 13, 16, 25 },
+  {  3,  8, 12, 17, 24, 26 },
+  {  9, 11, 18, 23, 27, 32 },
+  { 10, 19, 22, 28, 31, 33 },
+  { 20, 21, 29, 30, 34, 35 }
+};
+
+static const int jpeg_zigzag_order5[5][5] = {
+  {  0,  1,  5,  6, 14 },
+  {  2,  4,  7, 13, 15 },
+  {  3,  8, 12, 16, 21 },
+  {  9, 11, 17, 20, 22 },
+  { 10, 18, 19, 23, 24 }
+};
+
+static const int jpeg_zigzag_order4[4][4] = {
+  { 0,  1,  5,  6 },
+  { 2,  4,  7, 12 },
+  { 3,  8, 11, 13 },
+  { 9, 10, 14, 15 }
+};
+
+static const int jpeg_zigzag_order3[3][3] = {
+  { 0, 1, 5 },
+  { 2, 4, 6 },
+  { 3, 7, 8 }
+};
+
+static const int jpeg_zigzag_order2[2][2] = {
+  { 0, 1 },
+  { 2, 3 }
+};
+
+
+/*
+ * Compute the derived values for a Huffman table.
+ * This routine also performs some validation checks on the table.
+ */
+
+LOCAL(void)
+jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno,
+			 d_derived_tbl ** pdtbl)
+{
+  JHUFF_TBL *htbl;
+  d_derived_tbl *dtbl;
+  int p, i, l, si, numsymbols;
+  int lookbits, ctr;
+  char huffsize[257];
+  unsigned int huffcode[257];
+  unsigned int code;
+
+  /* Note that huffsize[] and huffcode[] are filled in code-length order,
+   * paralleling the order of the symbols themselves in htbl->huffval[].
+   */
+
+  /* Find the input Huffman table */
+  if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+  htbl =
+    isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
+  if (htbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+
+  /* Allocate a workspace if we haven't already done so. */
+  if (*pdtbl == NULL)
+    *pdtbl = (d_derived_tbl *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(d_derived_tbl));
+  dtbl = *pdtbl;
+  dtbl->pub = htbl;		/* fill in back link */
+  
+  /* Figure C.1: make table of Huffman code length for each symbol */
+
+  p = 0;
+  for (l = 1; l <= 16; l++) {
+    i = (int) htbl->bits[l];
+    if (i < 0 || p + i > 256)	/* protect against table overrun */
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    while (i--)
+      huffsize[p++] = (char) l;
+  }
+  huffsize[p] = 0;
+  numsymbols = p;
+  
+  /* Figure C.2: generate the codes themselves */
+  /* We also validate that the counts represent a legal Huffman code tree. */
+  
+  code = 0;
+  si = huffsize[0];
+  p = 0;
+  while (huffsize[p]) {
+    while (((int) huffsize[p]) == si) {
+      huffcode[p++] = code;
+      code++;
+    }
+    /* code is now 1 more than the last code used for codelength si; but
+     * it must still fit in si bits, since no code is allowed to be all ones.
+     */
+    if (((INT32) code) >= (((INT32) 1) << si))
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    code <<= 1;
+    si++;
+  }
+
+  /* Figure F.15: generate decoding tables for bit-sequential decoding */
+
+  p = 0;
+  for (l = 1; l <= 16; l++) {
+    if (htbl->bits[l]) {
+      /* valoffset[l] = huffval[] index of 1st symbol of code length l,
+       * minus the minimum code of length l
+       */
+      dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p];
+      p += htbl->bits[l];
+      dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */
+    } else {
+      dtbl->maxcode[l] = -1;	/* -1 if no codes of this length */
+    }
+  }
+  dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */
+
+  /* Compute lookahead tables to speed up decoding.
+   * First we set all the table entries to 0, indicating "too long";
+   * then we iterate through the Huffman codes that are short enough and
+   * fill in all the entries that correspond to bit sequences starting
+   * with that code.
+   */
+
+  MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits));
+
+  p = 0;
+  for (l = 1; l <= HUFF_LOOKAHEAD; l++) {
+    for (i = 1; i <= (int) htbl->bits[l]; i++, p++) {
+      /* l = current code's length, p = its index in huffcode[] & huffval[]. */
+      /* Generate left-justified code followed by all possible bit sequences */
+      lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l);
+      for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) {
+	dtbl->look_nbits[lookbits] = l;
+	dtbl->look_sym[lookbits] = htbl->huffval[p];
+	lookbits++;
+      }
+    }
+  }
+
+  /* Validate symbols as being reasonable.
+   * For AC tables, we make no check, but accept all byte values 0..255.
+   * For DC tables, we require the symbols to be in range 0..15.
+   * (Tighter bounds could be applied depending on the data depth and mode,
+   * but this is sufficient to ensure safe decoding.)
+   */
+  if (isDC) {
+    for (i = 0; i < numsymbols; i++) {
+      int sym = htbl->huffval[i];
+      if (sym < 0 || sym > 15)
+	ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    }
+  }
+}
+
+
+/*
+ * Out-of-line code for bit fetching.
+ * Note: current values of get_buffer and bits_left are passed as parameters,
+ * but are returned in the corresponding fields of the state struct.
+ *
+ * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width
+ * of get_buffer to be used.  (On machines with wider words, an even larger
+ * buffer could be used.)  However, on some machines 32-bit shifts are
+ * quite slow and take time proportional to the number of places shifted.
+ * (This is true with most PC compilers, for instance.)  In this case it may
+ * be a win to set MIN_GET_BITS to the minimum value of 15.  This reduces the
+ * average shift distance at the cost of more calls to jpeg_fill_bit_buffer.
+ */
+
+#ifdef SLOW_SHIFT_32
+#define MIN_GET_BITS  15	/* minimum allowable value */
+#else
+#define MIN_GET_BITS  (BIT_BUF_SIZE-7)
+#endif
+
+
+LOCAL(boolean)
+jpeg_fill_bit_buffer (bitread_working_state * state,
+		      register bit_buf_type get_buffer, register int bits_left,
+		      int nbits)
+/* Load up the bit buffer to a depth of at least nbits */
+{
+  /* Copy heavily used state fields into locals (hopefully registers) */
+  register const JOCTET * next_input_byte = state->next_input_byte;
+  register size_t bytes_in_buffer = state->bytes_in_buffer;
+  j_decompress_ptr cinfo = state->cinfo;
+
+  /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */
+  /* (It is assumed that no request will be for more than that many bits.) */
+  /* We fail to do so only if we hit a marker or are forced to suspend. */
+
+  if (cinfo->unread_marker == 0) {	/* cannot advance past a marker */
+    while (bits_left < MIN_GET_BITS) {
+      register int c;
+
+      /* Attempt to read a byte */
+      if (bytes_in_buffer == 0) {
+	if (! (*cinfo->src->fill_input_buffer) (cinfo))
+	  return FALSE;
+	next_input_byte = cinfo->src->next_input_byte;
+	bytes_in_buffer = cinfo->src->bytes_in_buffer;
+      }
+      bytes_in_buffer--;
+      c = GETJOCTET(*next_input_byte++);
+
+      /* If it's 0xFF, check and discard stuffed zero byte */
+      if (c == 0xFF) {
+	/* Loop here to discard any padding FF's on terminating marker,
+	 * so that we can save a valid unread_marker value.  NOTE: we will
+	 * accept multiple FF's followed by a 0 as meaning a single FF data
+	 * byte.  This data pattern is not valid according to the standard.
+	 */
+	do {
+	  if (bytes_in_buffer == 0) {
+	    if (! (*cinfo->src->fill_input_buffer) (cinfo))
+	      return FALSE;
+	    next_input_byte = cinfo->src->next_input_byte;
+	    bytes_in_buffer = cinfo->src->bytes_in_buffer;
+	  }
+	  bytes_in_buffer--;
+	  c = GETJOCTET(*next_input_byte++);
+	} while (c == 0xFF);
+
+	if (c == 0) {
+	  /* Found FF/00, which represents an FF data byte */
+	  c = 0xFF;
+	} else {
+	  /* Oops, it's actually a marker indicating end of compressed data.
+	   * Save the marker code for later use.
+	   * Fine point: it might appear that we should save the marker into
+	   * bitread working state, not straight into permanent state.  But
+	   * once we have hit a marker, we cannot need to suspend within the
+	   * current MCU, because we will read no more bytes from the data
+	   * source.  So it is OK to update permanent state right away.
+	   */
+	  cinfo->unread_marker = c;
+	  /* See if we need to insert some fake zero bits. */
+	  goto no_more_bytes;
+	}
+      }
+
+      /* OK, load c into get_buffer */
+      get_buffer = (get_buffer << 8) | c;
+      bits_left += 8;
+    } /* end while */
+  } else {
+  no_more_bytes:
+    /* We get here if we've read the marker that terminates the compressed
+     * data segment.  There should be enough bits in the buffer register
+     * to satisfy the request; if so, no problem.
+     */
+    if (nbits > bits_left) {
+      /* Uh-oh.  Report corrupted data to user and stuff zeroes into
+       * the data stream, so that we can produce some kind of image.
+       * We use a nonvolatile flag to ensure that only one warning message
+       * appears per data segment.
+       */
+      if (! ((huff_entropy_ptr) cinfo->entropy)->insufficient_data) {
+	WARNMS(cinfo, JWRN_HIT_MARKER);
+	((huff_entropy_ptr) cinfo->entropy)->insufficient_data = TRUE;
+      }
+      /* Fill the buffer with zero bits */
+      get_buffer <<= MIN_GET_BITS - bits_left;
+      bits_left = MIN_GET_BITS;
+    }
+  }
+
+  /* Unload the local registers */
+  state->next_input_byte = next_input_byte;
+  state->bytes_in_buffer = bytes_in_buffer;
+  state->get_buffer = get_buffer;
+  state->bits_left = bits_left;
+
+  return TRUE;
+}
+
+
+/*
+ * Figure F.12: extend sign bit.
+ * On some machines, a shift and sub will be faster than a table lookup.
+ */
+
+#ifdef AVOID_TABLES
+
+#define BIT_MASK(nbits)   ((1<<(nbits))-1)
+#define HUFF_EXTEND(x,s)  ((x) < (1<<((s)-1)) ? (x) - ((1<<(s))-1) : (x))
+
+#else
+
+#define BIT_MASK(nbits)   bmask[nbits]
+#define HUFF_EXTEND(x,s)  ((x) <= bmask[(s) - 1] ? (x) - bmask[s] : (x))
+
+static const int bmask[16] =	/* bmask[n] is mask for n rightmost bits */
+  { 0, 0x0001, 0x0003, 0x0007, 0x000F, 0x001F, 0x003F, 0x007F, 0x00FF,
+    0x01FF, 0x03FF, 0x07FF, 0x0FFF, 0x1FFF, 0x3FFF, 0x7FFF };
+
+#endif /* AVOID_TABLES */
+
+
+/*
+ * Out-of-line code for Huffman code decoding.
+ */
+
+LOCAL(int)
+jpeg_huff_decode (bitread_working_state * state,
+		  register bit_buf_type get_buffer, register int bits_left,
+		  d_derived_tbl * htbl, int min_bits)
+{
+  register int l = min_bits;
+  register INT32 code;
+
+  /* HUFF_DECODE has determined that the code is at least min_bits */
+  /* bits long, so fetch that many bits in one swoop. */
+
+  CHECK_BIT_BUFFER(*state, l, return -1);
+  code = GET_BITS(l);
+
+  /* Collect the rest of the Huffman code one bit at a time. */
+  /* This is per Figure F.16 in the JPEG spec. */
+
+  while (code > htbl->maxcode[l]) {
+    code <<= 1;
+    CHECK_BIT_BUFFER(*state, 1, return -1);
+    code |= GET_BITS(1);
+    l++;
+  }
+
+  /* Unload the local registers */
+  state->get_buffer = get_buffer;
+  state->bits_left = bits_left;
+
+  /* With garbage input we may reach the sentinel value l = 17. */
+
+  if (l > 16) {
+    WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE);
+    return 0;			/* fake a zero as the safest result */
+  }
+
+  return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ];
+}
+
+
+/*
+ * Check for a restart marker & resynchronize decoder.
+ * Returns FALSE if must suspend.
+ */
+
+LOCAL(boolean)
+process_restart (j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int ci;
+
+  /* Throw away any unused bits remaining in bit buffer; */
+  /* include any full bytes in next_marker's count of discarded bytes */
+  cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
+  entropy->bitstate.bits_left = 0;
+
+  /* Advance past the RSTn marker */
+  if (! (*cinfo->marker->read_restart_marker) (cinfo))
+    return FALSE;
+
+  /* Re-initialize DC predictions to 0 */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++)
+    entropy->saved.last_dc_val[ci] = 0;
+  /* Re-init EOB run count, too */
+  entropy->saved.EOBRUN = 0;
+
+  /* Reset restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+
+  /* Reset out-of-data flag, unless read_restart_marker left us smack up
+   * against a marker.  In that case we will end up treating the next data
+   * segment as empty, and we can avoid producing bogus output pixels by
+   * leaving the flag set.
+   */
+  if (cinfo->unread_marker == 0)
+    entropy->insufficient_data = FALSE;
+
+  return TRUE;
+}
+
+
+/*
+ * Huffman MCU decoding.
+ * Each of these routines decodes and returns one MCU's worth of
+ * Huffman-compressed coefficients. 
+ * The coefficients are reordered from zigzag order into natural array order,
+ * but are not dequantized.
+ *
+ * The i'th block of the MCU is stored into the block pointed to by
+ * MCU_data[i].  WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER.
+ * (Wholesale zeroing is usually a little faster than retail...)
+ *
+ * We return FALSE if data source requested suspension.  In that case no
+ * changes have been made to permanent state.  (Exception: some output
+ * coefficients may already have been assigned.  This is harmless for
+ * spectral selection, since we'll just re-assign them on the next call.
+ * Successive approximation AC refinement has to be more careful, however.)
+ */
+
+/*
+ * MCU decoding for DC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{   
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int Al = cinfo->Al;
+  register int s, r;
+  int blkn, ci;
+  JBLOCKROW block;
+  BITREAD_STATE_VARS;
+  savable_state state;
+  d_derived_tbl * tbl;
+  jpeg_component_info * compptr;
+
+  /* Process restart marker if needed; may have to suspend */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (! process_restart(cinfo))
+	return FALSE;
+  }
+
+  /* If we've run out of data, just leave the MCU set to zeroes.
+   * This way, we return uniform gray for the remainder of the segment.
+   */
+  if (! entropy->insufficient_data) {
+
+    /* Load up working state */
+    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(state, entropy->saved);
+
+    /* Outer loop handles each block in the MCU */
+
+    for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+      block = MCU_data[blkn];
+      ci = cinfo->MCU_membership[blkn];
+      compptr = cinfo->cur_comp_info[ci];
+      tbl = entropy->derived_tbls[compptr->dc_tbl_no];
+
+      /* Decode a single block's worth of coefficients */
+
+      /* Section F.2.2.1: decode the DC coefficient difference */
+      HUFF_DECODE(s, br_state, tbl, return FALSE, label1);
+      if (s) {
+	CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	r = GET_BITS(s);
+	s = HUFF_EXTEND(r, s);
+      }
+
+      /* Convert DC difference to actual value, update last_dc_val */
+      s += state.last_dc_val[ci];
+      state.last_dc_val[ci] = s;
+      /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */
+      (*block)[0] = (JCOEF) (s << Al);
+    }
+
+    /* Completed MCU, so update state */
+    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(entropy->saved, state);
+  }
+
+  /* Account for restart interval (no-op if not using restarts) */
+  entropy->restarts_to_go--;
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for AC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{   
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  register int s, k, r;
+  unsigned int EOBRUN;
+  int Se, Al;
+  const int * natural_order;
+  JBLOCKROW block;
+  BITREAD_STATE_VARS;
+  d_derived_tbl * tbl;
+
+  /* Process restart marker if needed; may have to suspend */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (! process_restart(cinfo))
+	return FALSE;
+  }
+
+  /* If we've run out of data, just leave the MCU set to zeroes.
+   * This way, we return uniform gray for the remainder of the segment.
+   */
+  if (! entropy->insufficient_data) {
+
+    Se = cinfo->Se;
+    Al = cinfo->Al;
+    natural_order = cinfo->natural_order;
+
+    /* Load up working state.
+     * We can avoid loading/saving bitread state if in an EOB run.
+     */
+    EOBRUN = entropy->saved.EOBRUN;	/* only part of saved state we need */
+
+    /* There is always only one block per MCU */
+
+    if (EOBRUN > 0)		/* if it's a band of zeroes... */
+      EOBRUN--;			/* ...process it now (we do nothing) */
+    else {
+      BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+      block = MCU_data[0];
+      tbl = entropy->ac_derived_tbl;
+
+      for (k = cinfo->Ss; k <= Se; k++) {
+	HUFF_DECODE(s, br_state, tbl, return FALSE, label2);
+	r = s >> 4;
+	s &= 15;
+	if (s) {
+	  k += r;
+	  CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	  r = GET_BITS(s);
+	  s = HUFF_EXTEND(r, s);
+	  /* Scale and output coefficient in natural (dezigzagged) order */
+	  (*block)[natural_order[k]] = (JCOEF) (s << Al);
+	} else {
+	  if (r == 15) {	/* ZRL */
+	    k += 15;		/* skip 15 zeroes in band */
+	  } else {		/* EOBr, run length is 2^r + appended bits */
+	    EOBRUN = 1 << r;
+	    if (r) {		/* EOBr, r > 0 */
+	      CHECK_BIT_BUFFER(br_state, r, return FALSE);
+	      r = GET_BITS(r);
+	      EOBRUN += r;
+	    }
+	    EOBRUN--;		/* this band is processed at this moment */
+	    break;		/* force end-of-band */
+	  }
+	}
+      }
+
+      BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+    }
+
+    /* Completed MCU, so update state */
+    entropy->saved.EOBRUN = EOBRUN;	/* only part of saved state we need */
+  }
+
+  /* Account for restart interval (no-op if not using restarts) */
+  entropy->restarts_to_go--;
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for DC successive approximation refinement scan.
+ * Note: we assume such scans can be multi-component, although the spec
+ * is not very clear on the point.
+ */
+
+METHODDEF(boolean)
+decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{   
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int p1 = 1 << cinfo->Al;	/* 1 in the bit position being coded */
+  int blkn;
+  JBLOCKROW block;
+  BITREAD_STATE_VARS;
+
+  /* Process restart marker if needed; may have to suspend */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (! process_restart(cinfo))
+	return FALSE;
+  }
+
+  /* Not worth the cycles to check insufficient_data here,
+   * since we will not change the data anyway if we read zeroes.
+   */
+
+  /* Load up working state */
+  BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+
+    /* Encoded data is simply the next bit of the two's-complement DC value */
+    CHECK_BIT_BUFFER(br_state, 1, return FALSE);
+    if (GET_BITS(1))
+      (*block)[0] |= p1;
+    /* Note: since we use |=, repeating the assignment later is safe */
+  }
+
+  /* Completed MCU, so update state */
+  BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+
+  /* Account for restart interval (no-op if not using restarts) */
+  entropy->restarts_to_go--;
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for AC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{   
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  register int s, k, r;
+  unsigned int EOBRUN;
+  int Se, p1, m1;
+  const int * natural_order;
+  JBLOCKROW block;
+  JCOEFPTR thiscoef;
+  BITREAD_STATE_VARS;
+  d_derived_tbl * tbl;
+  int num_newnz;
+  int newnz_pos[DCTSIZE2];
+
+  /* Process restart marker if needed; may have to suspend */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (! process_restart(cinfo))
+	return FALSE;
+  }
+
+  /* If we've run out of data, don't modify the MCU.
+   */
+  if (! entropy->insufficient_data) {
+
+    Se = cinfo->Se;
+    p1 = 1 << cinfo->Al;	/* 1 in the bit position being coded */
+    m1 = (-1) << cinfo->Al;	/* -1 in the bit position being coded */
+    natural_order = cinfo->natural_order;
+
+    /* Load up working state */
+    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+    EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */
+
+    /* There is always only one block per MCU */
+    block = MCU_data[0];
+    tbl = entropy->ac_derived_tbl;
+
+    /* If we are forced to suspend, we must undo the assignments to any newly
+     * nonzero coefficients in the block, because otherwise we'd get confused
+     * next time about which coefficients were already nonzero.
+     * But we need not undo addition of bits to already-nonzero coefficients;
+     * instead, we can test the current bit to see if we already did it.
+     */
+    num_newnz = 0;
+
+    /* initialize coefficient loop counter to start of band */
+    k = cinfo->Ss;
+
+    if (EOBRUN == 0) {
+      for (; k <= Se; k++) {
+	HUFF_DECODE(s, br_state, tbl, goto undoit, label3);
+	r = s >> 4;
+	s &= 15;
+	if (s) {
+	  if (s != 1)		/* size of new coef should always be 1 */
+	    WARNMS(cinfo, JWRN_HUFF_BAD_CODE);
+	  CHECK_BIT_BUFFER(br_state, 1, goto undoit);
+	  if (GET_BITS(1))
+	    s = p1;		/* newly nonzero coef is positive */
+	  else
+	    s = m1;		/* newly nonzero coef is negative */
+	} else {
+	  if (r != 15) {
+	    EOBRUN = 1 << r;	/* EOBr, run length is 2^r + appended bits */
+	    if (r) {
+	      CHECK_BIT_BUFFER(br_state, r, goto undoit);
+	      r = GET_BITS(r);
+	      EOBRUN += r;
+	    }
+	    break;		/* rest of block is handled by EOB logic */
+	  }
+	  /* note s = 0 for processing ZRL */
+	}
+	/* Advance over already-nonzero coefs and r still-zero coefs,
+	 * appending correction bits to the nonzeroes.  A correction bit is 1
+	 * if the absolute value of the coefficient must be increased.
+	 */
+	do {
+	  thiscoef = *block + natural_order[k];
+	  if (*thiscoef != 0) {
+	    CHECK_BIT_BUFFER(br_state, 1, goto undoit);
+	    if (GET_BITS(1)) {
+	      if ((*thiscoef & p1) == 0) { /* do nothing if already set it */
+		if (*thiscoef >= 0)
+		  *thiscoef += p1;
+		else
+		  *thiscoef += m1;
+	      }
+	    }
+	  } else {
+	    if (--r < 0)
+	      break;		/* reached target zero coefficient */
+	  }
+	  k++;
+	} while (k <= Se);
+	if (s) {
+	  int pos = natural_order[k];
+	  /* Output newly nonzero coefficient */
+	  (*block)[pos] = (JCOEF) s;
+	  /* Remember its position in case we have to suspend */
+	  newnz_pos[num_newnz++] = pos;
+	}
+      }
+    }
+
+    if (EOBRUN > 0) {
+      /* Scan any remaining coefficient positions after the end-of-band
+       * (the last newly nonzero coefficient, if any).  Append a correction
+       * bit to each already-nonzero coefficient.  A correction bit is 1
+       * if the absolute value of the coefficient must be increased.
+       */
+      for (; k <= Se; k++) {
+	thiscoef = *block + natural_order[k];
+	if (*thiscoef != 0) {
+	  CHECK_BIT_BUFFER(br_state, 1, goto undoit);
+	  if (GET_BITS(1)) {
+	    if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */
+	      if (*thiscoef >= 0)
+		*thiscoef += p1;
+	      else
+		*thiscoef += m1;
+	    }
+	  }
+	}
+      }
+      /* Count one block completed in EOB run */
+      EOBRUN--;
+    }
+
+    /* Completed MCU, so update state */
+    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+    entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */
+  }
+
+  /* Account for restart interval (no-op if not using restarts) */
+  entropy->restarts_to_go--;
+
+  return TRUE;
+
+undoit:
+  /* Re-zero any output coefficients that we made newly nonzero */
+  while (num_newnz > 0)
+    (*block)[newnz_pos[--num_newnz]] = 0;
+
+  return FALSE;
+}
+
+
+/*
+ * Decode one MCU's worth of Huffman-compressed coefficients,
+ * partial blocks.
+ */
+
+METHODDEF(boolean)
+decode_mcu_sub (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  const int * natural_order;
+  int Se, blkn;
+  BITREAD_STATE_VARS;
+  savable_state state;
+
+  /* Process restart marker if needed; may have to suspend */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (! process_restart(cinfo))
+	return FALSE;
+  }
+
+  /* If we've run out of data, just leave the MCU set to zeroes.
+   * This way, we return uniform gray for the remainder of the segment.
+   */
+  if (! entropy->insufficient_data) {
+
+    natural_order = cinfo->natural_order;
+    Se = cinfo->lim_Se;
+
+    /* Load up working state */
+    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(state, entropy->saved);
+
+    /* Outer loop handles each block in the MCU */
+
+    for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+      JBLOCKROW block = MCU_data[blkn];
+      d_derived_tbl * htbl;
+      register int s, k, r;
+      int coef_limit, ci;
+
+      /* Decode a single block's worth of coefficients */
+
+      /* Section F.2.2.1: decode the DC coefficient difference */
+      htbl = entropy->dc_cur_tbls[blkn];
+      HUFF_DECODE(s, br_state, htbl, return FALSE, label1);
+
+      htbl = entropy->ac_cur_tbls[blkn];
+      k = 1;
+      coef_limit = entropy->coef_limit[blkn];
+      if (coef_limit) {
+	/* Convert DC difference to actual value, update last_dc_val */
+	if (s) {
+	  CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	  r = GET_BITS(s);
+	  s = HUFF_EXTEND(r, s);
+	}
+	ci = cinfo->MCU_membership[blkn];
+	s += state.last_dc_val[ci];
+	state.last_dc_val[ci] = s;
+	/* Output the DC coefficient */
+	(*block)[0] = (JCOEF) s;
+
+	/* Section F.2.2.2: decode the AC coefficients */
+	/* Since zeroes are skipped, output area must be cleared beforehand */
+	for (; k < coef_limit; k++) {
+	  HUFF_DECODE(s, br_state, htbl, return FALSE, label2);
+
+	  r = s >> 4;
+	  s &= 15;
+
+	  if (s) {
+	    k += r;
+	    CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	    r = GET_BITS(s);
+	    s = HUFF_EXTEND(r, s);
+	    /* Output coefficient in natural (dezigzagged) order.
+	     * Note: the extra entries in natural_order[] will save us
+	     * if k > Se, which could happen if the data is corrupted.
+	     */
+	    (*block)[natural_order[k]] = (JCOEF) s;
+	  } else {
+	    if (r != 15)
+	      goto EndOfBlock;
+	    k += 15;
+	  }
+	}
+      } else {
+	if (s) {
+	  CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	  DROP_BITS(s);
+	}
+      }
+
+      /* Section F.2.2.2: decode the AC coefficients */
+      /* In this path we just discard the values */
+      for (; k <= Se; k++) {
+	HUFF_DECODE(s, br_state, htbl, return FALSE, label3);
+
+	r = s >> 4;
+	s &= 15;
+
+	if (s) {
+	  k += r;
+	  CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	  DROP_BITS(s);
+	} else {
+	  if (r != 15)
+	    break;
+	  k += 15;
+	}
+      }
+
+      EndOfBlock: ;
+    }
+
+    /* Completed MCU, so update state */
+    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(entropy->saved, state);
+  }
+
+  /* Account for restart interval (no-op if not using restarts) */
+  entropy->restarts_to_go--;
+
+  return TRUE;
+}
+
+
+/*
+ * Decode one MCU's worth of Huffman-compressed coefficients,
+ * full-size blocks.
+ */
+
+METHODDEF(boolean)
+decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int blkn;
+  BITREAD_STATE_VARS;
+  savable_state state;
+
+  /* Process restart marker if needed; may have to suspend */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (! process_restart(cinfo))
+	return FALSE;
+  }
+
+  /* If we've run out of data, just leave the MCU set to zeroes.
+   * This way, we return uniform gray for the remainder of the segment.
+   */
+  if (! entropy->insufficient_data) {
+
+    /* Load up working state */
+    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(state, entropy->saved);
+
+    /* Outer loop handles each block in the MCU */
+
+    for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+      JBLOCKROW block = MCU_data[blkn];
+      d_derived_tbl * htbl;
+      register int s, k, r;
+      int coef_limit, ci;
+
+      /* Decode a single block's worth of coefficients */
+
+      /* Section F.2.2.1: decode the DC coefficient difference */
+      htbl = entropy->dc_cur_tbls[blkn];
+      HUFF_DECODE(s, br_state, htbl, return FALSE, label1);
+
+      htbl = entropy->ac_cur_tbls[blkn];
+      k = 1;
+      coef_limit = entropy->coef_limit[blkn];
+      if (coef_limit) {
+	/* Convert DC difference to actual value, update last_dc_val */
+	if (s) {
+	  CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	  r = GET_BITS(s);
+	  s = HUFF_EXTEND(r, s);
+	}
+	ci = cinfo->MCU_membership[blkn];
+	s += state.last_dc_val[ci];
+	state.last_dc_val[ci] = s;
+	/* Output the DC coefficient */
+	(*block)[0] = (JCOEF) s;
+
+	/* Section F.2.2.2: decode the AC coefficients */
+	/* Since zeroes are skipped, output area must be cleared beforehand */
+	for (; k < coef_limit; k++) {
+	  HUFF_DECODE(s, br_state, htbl, return FALSE, label2);
+
+	  r = s >> 4;
+	  s &= 15;
+
+	  if (s) {
+	    k += r;
+	    CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	    r = GET_BITS(s);
+	    s = HUFF_EXTEND(r, s);
+	    /* Output coefficient in natural (dezigzagged) order.
+	     * Note: the extra entries in jpeg_natural_order[] will save us
+	     * if k >= DCTSIZE2, which could happen if the data is corrupted.
+	     */
+	    (*block)[jpeg_natural_order[k]] = (JCOEF) s;
+	  } else {
+	    if (r != 15)
+	      goto EndOfBlock;
+	    k += 15;
+	  }
+	}
+      } else {
+	if (s) {
+	  CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	  DROP_BITS(s);
+	}
+      }
+
+      /* Section F.2.2.2: decode the AC coefficients */
+      /* In this path we just discard the values */
+      for (; k < DCTSIZE2; k++) {
+	HUFF_DECODE(s, br_state, htbl, return FALSE, label3);
+
+	r = s >> 4;
+	s &= 15;
+
+	if (s) {
+	  k += r;
+	  CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	  DROP_BITS(s);
+	} else {
+	  if (r != 15)
+	    break;
+	  k += 15;
+	}
+      }
+
+      EndOfBlock: ;
+    }
+
+    /* Completed MCU, so update state */
+    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(entropy->saved, state);
+  }
+
+  /* Account for restart interval (no-op if not using restarts) */
+  entropy->restarts_to_go--;
+
+  return TRUE;
+}
+
+
+/*
+ * Initialize for a Huffman-compressed scan.
+ */
+
+METHODDEF(void)
+start_pass_huff_decoder (j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int ci, blkn, tbl, i;
+  jpeg_component_info * compptr;
+
+  if (cinfo->progressive_mode) {
+    /* Validate progressive scan parameters */
+    if (cinfo->Ss == 0) {
+      if (cinfo->Se != 0)
+	goto bad;
+    } else {
+      /* need not check Ss/Se < 0 since they came from unsigned bytes */
+      if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se)
+	goto bad;
+      /* AC scans may have only one component */
+      if (cinfo->comps_in_scan != 1)
+	goto bad;
+    }
+    if (cinfo->Ah != 0) {
+      /* Successive approximation refinement scan: must have Al = Ah-1. */
+      if (cinfo->Ah-1 != cinfo->Al)
+	goto bad;
+    }
+    if (cinfo->Al > 13) {	/* need not check for < 0 */
+      /* Arguably the maximum Al value should be less than 13 for 8-bit precision,
+       * but the spec doesn't say so, and we try to be liberal about what we
+       * accept.  Note: large Al values could result in out-of-range DC
+       * coefficients during early scans, leading to bizarre displays due to
+       * overflows in the IDCT math.  But we won't crash.
+       */
+      bad:
+      ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
+	       cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
+    }
+    /* Update progression status, and verify that scan order is legal.
+     * Note that inter-scan inconsistencies are treated as warnings
+     * not fatal errors ... not clear if this is right way to behave.
+     */
+    for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+      int coefi, cindex = cinfo->cur_comp_info[ci]->component_index;
+      int *coef_bit_ptr = & cinfo->coef_bits[cindex][0];
+      if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */
+	WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0);
+      for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) {
+	int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi];
+	if (cinfo->Ah != expected)
+	  WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi);
+	coef_bit_ptr[coefi] = cinfo->Al;
+      }
+    }
+
+    /* Select MCU decoding routine */
+    if (cinfo->Ah == 0) {
+      if (cinfo->Ss == 0)
+	entropy->pub.decode_mcu = decode_mcu_DC_first;
+      else
+	entropy->pub.decode_mcu = decode_mcu_AC_first;
+    } else {
+      if (cinfo->Ss == 0)
+	entropy->pub.decode_mcu = decode_mcu_DC_refine;
+      else
+	entropy->pub.decode_mcu = decode_mcu_AC_refine;
+    }
+
+    for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+      compptr = cinfo->cur_comp_info[ci];
+      /* Make sure requested tables are present, and compute derived tables.
+       * We may build same derived table more than once, but it's not expensive.
+       */
+      if (cinfo->Ss == 0) {
+	if (cinfo->Ah == 0) {	/* DC refinement needs no table */
+	  tbl = compptr->dc_tbl_no;
+	  jpeg_make_d_derived_tbl(cinfo, TRUE, tbl,
+				  & entropy->derived_tbls[tbl]);
+	}
+      } else {
+	tbl = compptr->ac_tbl_no;
+	jpeg_make_d_derived_tbl(cinfo, FALSE, tbl,
+				& entropy->derived_tbls[tbl]);
+	/* remember the single active table */
+	entropy->ac_derived_tbl = entropy->derived_tbls[tbl];
+      }
+      /* Initialize DC predictions to 0 */
+      entropy->saved.last_dc_val[ci] = 0;
+    }
+
+    /* Initialize private state variables */
+    entropy->saved.EOBRUN = 0;
+  } else {
+    /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG.
+     * This ought to be an error condition, but we make it a warning because
+     * there are some baseline files out there with all zeroes in these bytes.
+     */
+    if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 ||
+	((cinfo->is_baseline || cinfo->Se < DCTSIZE2) &&
+	cinfo->Se != cinfo->lim_Se))
+      WARNMS(cinfo, JWRN_NOT_SEQUENTIAL);
+
+    /* Select MCU decoding routine */
+    /* We retain the hard-coded case for full-size blocks.
+     * This is not necessary, but it appears that this version is slightly
+     * more performant in the given implementation.
+     * With an improved implementation we would prefer a single optimized
+     * function.
+     */
+    if (cinfo->lim_Se != DCTSIZE2-1)
+      entropy->pub.decode_mcu = decode_mcu_sub;
+    else
+      entropy->pub.decode_mcu = decode_mcu;
+
+    for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+      compptr = cinfo->cur_comp_info[ci];
+      /* Compute derived values for Huffman tables */
+      /* We may do this more than once for a table, but it's not expensive */
+      tbl = compptr->dc_tbl_no;
+      jpeg_make_d_derived_tbl(cinfo, TRUE, tbl,
+			      & entropy->dc_derived_tbls[tbl]);
+      if (cinfo->lim_Se) {	/* AC needs no table when not present */
+	tbl = compptr->ac_tbl_no;
+	jpeg_make_d_derived_tbl(cinfo, FALSE, tbl,
+				& entropy->ac_derived_tbls[tbl]);
+      }
+      /* Initialize DC predictions to 0 */
+      entropy->saved.last_dc_val[ci] = 0;
+    }
+
+    /* Precalculate decoding info for each block in an MCU of this scan */
+    for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+      ci = cinfo->MCU_membership[blkn];
+      compptr = cinfo->cur_comp_info[ci];
+      /* Precalculate which table to use for each block */
+      entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no];
+      entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no];
+      /* Decide whether we really care about the coefficient values */
+      if (compptr->component_needed) {
+	ci = compptr->DCT_v_scaled_size;
+	i = compptr->DCT_h_scaled_size;
+	switch (cinfo->lim_Se) {
+	case (1*1-1):
+	  entropy->coef_limit[blkn] = 1;
+	  break;
+	case (2*2-1):
+	  if (ci <= 0 || ci > 2) ci = 2;
+	  if (i <= 0 || i > 2) i = 2;
+	  entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order2[ci - 1][i - 1];
+	  break;
+	case (3*3-1):
+	  if (ci <= 0 || ci > 3) ci = 3;
+	  if (i <= 0 || i > 3) i = 3;
+	  entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order3[ci - 1][i - 1];
+	  break;
+	case (4*4-1):
+	  if (ci <= 0 || ci > 4) ci = 4;
+	  if (i <= 0 || i > 4) i = 4;
+	  entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order4[ci - 1][i - 1];
+	  break;
+	case (5*5-1):
+	  if (ci <= 0 || ci > 5) ci = 5;
+	  if (i <= 0 || i > 5) i = 5;
+	  entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order5[ci - 1][i - 1];
+	  break;
+	case (6*6-1):
+	  if (ci <= 0 || ci > 6) ci = 6;
+	  if (i <= 0 || i > 6) i = 6;
+	  entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order6[ci - 1][i - 1];
+	  break;
+	case (7*7-1):
+	  if (ci <= 0 || ci > 7) ci = 7;
+	  if (i <= 0 || i > 7) i = 7;
+	  entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order7[ci - 1][i - 1];
+	  break;
+	default:
+	  if (ci <= 0 || ci > 8) ci = 8;
+	  if (i <= 0 || i > 8) i = 8;
+	  entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order[ci - 1][i - 1];
+	  break;
+	}
+      } else {
+	entropy->coef_limit[blkn] = 0;
+      }
+    }
+  }
+
+  /* Initialize bitread state variables */
+  entropy->bitstate.bits_left = 0;
+  entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
+  entropy->insufficient_data = FALSE;
+
+  /* Initialize restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+}
+
+
+/*
+ * Module initialization routine for Huffman entropy decoding.
+ */
+
+GLOBAL(void)
+jinit_huff_decoder (j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy;
+  int i;
+
+  entropy = (huff_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(huff_entropy_decoder));
+  cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
+  entropy->pub.start_pass = start_pass_huff_decoder;
+
+  if (cinfo->progressive_mode) {
+    /* Create progression status table */
+    int *coef_bit_ptr, ci;
+    cinfo->coef_bits = (int (*)[DCTSIZE2])
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  cinfo->num_components*DCTSIZE2*SIZEOF(int));
+    coef_bit_ptr = & cinfo->coef_bits[0][0];
+    for (ci = 0; ci < cinfo->num_components; ci++)
+      for (i = 0; i < DCTSIZE2; i++)
+	*coef_bit_ptr++ = -1;
+
+    /* Mark derived tables unallocated */
+    for (i = 0; i < NUM_HUFF_TBLS; i++) {
+      entropy->derived_tbls[i] = NULL;
+    }
+  } else {
+    /* Mark tables unallocated */
+    for (i = 0; i < NUM_HUFF_TBLS; i++) {
+      entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL;
+    }
+  }
+}
diff --git a/jpeg-8d/jdinput.c b/jpeg-8d/jdinput.c
new file mode 100644
index 0000000..2c5c717
--- /dev/null
+++ b/jpeg-8d/jdinput.c
@@ -0,0 +1,661 @@
+/*
+ * jdinput.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2002-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains input control logic for the JPEG decompressor.
+ * These routines are concerned with controlling the decompressor's input
+ * processing (marker reading and coefficient decoding).  The actual input
+ * reading is done in jdmarker.c, jdhuff.c, and jdarith.c.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Private state */
+
+typedef struct {
+  struct jpeg_input_controller pub; /* public fields */
+
+  int inheaders;		/* Nonzero until first SOS is reached */
+} my_input_controller;
+
+typedef my_input_controller * my_inputctl_ptr;
+
+
+/* Forward declarations */
+METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo));
+
+
+/*
+ * Routines to calculate various quantities related to the size of the image.
+ */
+
+
+/*
+ * Compute output image dimensions and related values.
+ * NOTE: this is exported for possible use by application.
+ * Hence it mustn't do anything that can't be done twice.
+ */
+
+GLOBAL(void)
+jpeg_core_output_dimensions (j_decompress_ptr cinfo)
+/* Do computations that are needed before master selection phase.
+ * This function is used for transcoding and full decompression.
+ */
+{
+#ifdef IDCT_SCALING_SUPPORTED
+  int ci;
+  jpeg_component_info *compptr;
+
+  /* Compute actual output image dimensions and DCT scaling choices. */
+  if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom) {
+    /* Provide 1/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 1;
+    cinfo->min_DCT_v_scaled_size = 1;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 2) {
+    /* Provide 2/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 2L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 2L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 2;
+    cinfo->min_DCT_v_scaled_size = 2;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 3) {
+    /* Provide 3/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 3L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 3L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 3;
+    cinfo->min_DCT_v_scaled_size = 3;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 4) {
+    /* Provide 4/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 4L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 4L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 4;
+    cinfo->min_DCT_v_scaled_size = 4;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 5) {
+    /* Provide 5/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 5L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 5L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 5;
+    cinfo->min_DCT_v_scaled_size = 5;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 6) {
+    /* Provide 6/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 6L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 6L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 6;
+    cinfo->min_DCT_v_scaled_size = 6;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 7) {
+    /* Provide 7/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 7L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 7L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 7;
+    cinfo->min_DCT_v_scaled_size = 7;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 8) {
+    /* Provide 8/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 8L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 8L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 8;
+    cinfo->min_DCT_v_scaled_size = 8;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 9) {
+    /* Provide 9/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 9L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 9L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 9;
+    cinfo->min_DCT_v_scaled_size = 9;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 10) {
+    /* Provide 10/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 10L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 10L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 10;
+    cinfo->min_DCT_v_scaled_size = 10;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 11) {
+    /* Provide 11/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 11L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 11L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 11;
+    cinfo->min_DCT_v_scaled_size = 11;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 12) {
+    /* Provide 12/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 12L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 12L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 12;
+    cinfo->min_DCT_v_scaled_size = 12;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 13) {
+    /* Provide 13/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 13L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 13L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 13;
+    cinfo->min_DCT_v_scaled_size = 13;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 14) {
+    /* Provide 14/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 14L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 14L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 14;
+    cinfo->min_DCT_v_scaled_size = 14;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 15) {
+    /* Provide 15/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 15L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 15L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 15;
+    cinfo->min_DCT_v_scaled_size = 15;
+  } else {
+    /* Provide 16/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 16L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 16L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 16;
+    cinfo->min_DCT_v_scaled_size = 16;
+  }
+
+  /* Recompute dimensions of components */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size;
+    compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size;
+  }
+
+#else /* !IDCT_SCALING_SUPPORTED */
+
+  /* Hardwire it to "no scaling" */
+  cinfo->output_width = cinfo->image_width;
+  cinfo->output_height = cinfo->image_height;
+  /* jdinput.c has already initialized DCT_scaled_size,
+   * and has computed unscaled downsampled_width and downsampled_height.
+   */
+
+#endif /* IDCT_SCALING_SUPPORTED */
+}
+
+
+LOCAL(void)
+initial_setup (j_decompress_ptr cinfo)
+/* Called once, when first SOS marker is reached */
+{
+  int ci;
+  jpeg_component_info *compptr;
+
+  /* Make sure image isn't bigger than I can handle */
+  if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION ||
+      (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
+    ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
+
+  /* For now, precision must match compiled-in value... */
+  if (cinfo->data_precision != BITS_IN_JSAMPLE)
+    ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
+
+  /* Check that number of components won't exceed internal array sizes */
+  if (cinfo->num_components > MAX_COMPONENTS)
+    ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+	     MAX_COMPONENTS);
+
+  /* Compute maximum sampling factors; check factor validity */
+  cinfo->max_h_samp_factor = 1;
+  cinfo->max_v_samp_factor = 1;
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR ||
+	compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR)
+      ERREXIT(cinfo, JERR_BAD_SAMPLING);
+    cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor,
+				   compptr->h_samp_factor);
+    cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor,
+				   compptr->v_samp_factor);
+  }
+
+  /* Derive block_size, natural_order, and lim_Se */
+  if (cinfo->is_baseline || (cinfo->progressive_mode &&
+      cinfo->comps_in_scan)) { /* no pseudo SOS marker */
+    cinfo->block_size = DCTSIZE;
+    cinfo->natural_order = jpeg_natural_order;
+    cinfo->lim_Se = DCTSIZE2-1;
+  } else
+    switch (cinfo->Se) {
+    case (1*1-1):
+      cinfo->block_size = 1;
+      cinfo->natural_order = jpeg_natural_order; /* not needed */
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (2*2-1):
+      cinfo->block_size = 2;
+      cinfo->natural_order = jpeg_natural_order2;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (3*3-1):
+      cinfo->block_size = 3;
+      cinfo->natural_order = jpeg_natural_order3;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (4*4-1):
+      cinfo->block_size = 4;
+      cinfo->natural_order = jpeg_natural_order4;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (5*5-1):
+      cinfo->block_size = 5;
+      cinfo->natural_order = jpeg_natural_order5;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (6*6-1):
+      cinfo->block_size = 6;
+      cinfo->natural_order = jpeg_natural_order6;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (7*7-1):
+      cinfo->block_size = 7;
+      cinfo->natural_order = jpeg_natural_order7;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (8*8-1):
+      cinfo->block_size = 8;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (9*9-1):
+      cinfo->block_size = 9;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (10*10-1):
+      cinfo->block_size = 10;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (11*11-1):
+      cinfo->block_size = 11;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (12*12-1):
+      cinfo->block_size = 12;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (13*13-1):
+      cinfo->block_size = 13;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (14*14-1):
+      cinfo->block_size = 14;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (15*15-1):
+      cinfo->block_size = 15;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (16*16-1):
+      cinfo->block_size = 16;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    default:
+      ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
+	       cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
+      break;
+    }
+
+  /* We initialize DCT_scaled_size and min_DCT_scaled_size to block_size.
+   * In the full decompressor,
+   * this will be overridden by jpeg_calc_output_dimensions in jdmaster.c;
+   * but in the transcoder,
+   * jpeg_calc_output_dimensions is not used, so we must do it here.
+   */
+  cinfo->min_DCT_h_scaled_size = cinfo->block_size;
+  cinfo->min_DCT_v_scaled_size = cinfo->block_size;
+
+  /* Compute dimensions of components */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    compptr->DCT_h_scaled_size = cinfo->block_size;
+    compptr->DCT_v_scaled_size = cinfo->block_size;
+    /* Size in DCT blocks */
+    compptr->width_in_blocks = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
+    compptr->height_in_blocks = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+    /* downsampled_width and downsampled_height will also be overridden by
+     * jdmaster.c if we are doing full decompression.  The transcoder library
+     * doesn't use these values, but the calling application might.
+     */
+    /* Size in samples */
+    compptr->downsampled_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
+		    (long) cinfo->max_h_samp_factor);
+    compptr->downsampled_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
+		    (long) cinfo->max_v_samp_factor);
+    /* Mark component needed, until color conversion says otherwise */
+    compptr->component_needed = TRUE;
+    /* Mark no quantization table yet saved for component */
+    compptr->quant_table = NULL;
+  }
+
+  /* Compute number of fully interleaved MCU rows. */
+  cinfo->total_iMCU_rows = (JDIMENSION)
+    jdiv_round_up((long) cinfo->image_height,
+	          (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+
+  /* Decide whether file contains multiple scans */
+  if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode)
+    cinfo->inputctl->has_multiple_scans = TRUE;
+  else
+    cinfo->inputctl->has_multiple_scans = FALSE;
+}
+
+
+LOCAL(void)
+per_scan_setup (j_decompress_ptr cinfo)
+/* Do computations that are needed before processing a JPEG scan */
+/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */
+{
+  int ci, mcublks, tmp;
+  jpeg_component_info *compptr;
+  
+  if (cinfo->comps_in_scan == 1) {
+    
+    /* Noninterleaved (single-component) scan */
+    compptr = cinfo->cur_comp_info[0];
+    
+    /* Overall image size in MCUs */
+    cinfo->MCUs_per_row = compptr->width_in_blocks;
+    cinfo->MCU_rows_in_scan = compptr->height_in_blocks;
+    
+    /* For noninterleaved scan, always one block per MCU */
+    compptr->MCU_width = 1;
+    compptr->MCU_height = 1;
+    compptr->MCU_blocks = 1;
+    compptr->MCU_sample_width = compptr->DCT_h_scaled_size;
+    compptr->last_col_width = 1;
+    /* For noninterleaved scans, it is convenient to define last_row_height
+     * as the number of block rows present in the last iMCU row.
+     */
+    tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
+    if (tmp == 0) tmp = compptr->v_samp_factor;
+    compptr->last_row_height = tmp;
+    
+    /* Prepare array describing MCU composition */
+    cinfo->blocks_in_MCU = 1;
+    cinfo->MCU_membership[0] = 0;
+    
+  } else {
+    
+    /* Interleaved (multi-component) scan */
+    if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN)
+      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan,
+	       MAX_COMPS_IN_SCAN);
+    
+    /* Overall image size in MCUs */
+    cinfo->MCUs_per_row = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width,
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
+    cinfo->MCU_rows_in_scan = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height,
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+    
+    cinfo->blocks_in_MCU = 0;
+    
+    for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+      compptr = cinfo->cur_comp_info[ci];
+      /* Sampling factors give # of blocks of component in each MCU */
+      compptr->MCU_width = compptr->h_samp_factor;
+      compptr->MCU_height = compptr->v_samp_factor;
+      compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
+      compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size;
+      /* Figure number of non-dummy blocks in last MCU column & row */
+      tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
+      if (tmp == 0) tmp = compptr->MCU_width;
+      compptr->last_col_width = tmp;
+      tmp = (int) (compptr->height_in_blocks % compptr->MCU_height);
+      if (tmp == 0) tmp = compptr->MCU_height;
+      compptr->last_row_height = tmp;
+      /* Prepare array describing MCU composition */
+      mcublks = compptr->MCU_blocks;
+      if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU)
+	ERREXIT(cinfo, JERR_BAD_MCU_SIZE);
+      while (mcublks-- > 0) {
+	cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci;
+      }
+    }
+    
+  }
+}
+
+
+/*
+ * Save away a copy of the Q-table referenced by each component present
+ * in the current scan, unless already saved during a prior scan.
+ *
+ * In a multiple-scan JPEG file, the encoder could assign different components
+ * the same Q-table slot number, but change table definitions between scans
+ * so that each component uses a different Q-table.  (The IJG encoder is not
+ * currently capable of doing this, but other encoders might.)  Since we want
+ * to be able to dequantize all the components at the end of the file, this
+ * means that we have to save away the table actually used for each component.
+ * We do this by copying the table at the start of the first scan containing
+ * the component.
+ * The JPEG spec prohibits the encoder from changing the contents of a Q-table
+ * slot between scans of a component using that slot.  If the encoder does so
+ * anyway, this decoder will simply use the Q-table values that were current
+ * at the start of the first scan for the component.
+ *
+ * The decompressor output side looks only at the saved quant tables,
+ * not at the current Q-table slots.
+ */
+
+LOCAL(void)
+latch_quant_tables (j_decompress_ptr cinfo)
+{
+  int ci, qtblno;
+  jpeg_component_info *compptr;
+  JQUANT_TBL * qtbl;
+
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* No work if we already saved Q-table for this component */
+    if (compptr->quant_table != NULL)
+      continue;
+    /* Make sure specified quantization table is present */
+    qtblno = compptr->quant_tbl_no;
+    if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
+	cinfo->quant_tbl_ptrs[qtblno] == NULL)
+      ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
+    /* OK, save away the quantization table */
+    qtbl = (JQUANT_TBL *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(JQUANT_TBL));
+    MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL));
+    compptr->quant_table = qtbl;
+  }
+}
+
+
+/*
+ * Initialize the input modules to read a scan of compressed data.
+ * The first call to this is done by jdmaster.c after initializing
+ * the entire decompressor (during jpeg_start_decompress).
+ * Subsequent calls come from consume_markers, below.
+ */
+
+METHODDEF(void)
+start_input_pass (j_decompress_ptr cinfo)
+{
+  per_scan_setup(cinfo);
+  latch_quant_tables(cinfo);
+  (*cinfo->entropy->start_pass) (cinfo);
+  (*cinfo->coef->start_input_pass) (cinfo);
+  cinfo->inputctl->consume_input = cinfo->coef->consume_data;
+}
+
+
+/*
+ * Finish up after inputting a compressed-data scan.
+ * This is called by the coefficient controller after it's read all
+ * the expected data of the scan.
+ */
+
+METHODDEF(void)
+finish_input_pass (j_decompress_ptr cinfo)
+{
+  cinfo->inputctl->consume_input = consume_markers;
+}
+
+
+/*
+ * Read JPEG markers before, between, or after compressed-data scans.
+ * Change state as necessary when a new scan is reached.
+ * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
+ *
+ * The consume_input method pointer points either here or to the
+ * coefficient controller's consume_data routine, depending on whether
+ * we are reading a compressed data segment or inter-segment markers.
+ *
+ * Note: This function should NOT return a pseudo SOS marker (with zero
+ * component number) to the caller.  A pseudo marker received by
+ * read_markers is processed and then skipped for other markers.
+ */
+
+METHODDEF(int)
+consume_markers (j_decompress_ptr cinfo)
+{
+  my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl;
+  int val;
+
+  if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */
+    return JPEG_REACHED_EOI;
+
+  for (;;) {			/* Loop to pass pseudo SOS marker */
+    val = (*cinfo->marker->read_markers) (cinfo);
+
+    switch (val) {
+    case JPEG_REACHED_SOS:	/* Found SOS */
+      if (inputctl->inheaders) { /* 1st SOS */
+	if (inputctl->inheaders == 1)
+	  initial_setup(cinfo);
+	if (cinfo->comps_in_scan == 0) { /* pseudo SOS marker */
+	  inputctl->inheaders = 2;
+	  break;
+	}
+	inputctl->inheaders = 0;
+	/* Note: start_input_pass must be called by jdmaster.c
+	 * before any more input can be consumed.  jdapimin.c is
+	 * responsible for enforcing this sequencing.
+	 */
+      } else {			/* 2nd or later SOS marker */
+	if (! inputctl->pub.has_multiple_scans)
+	  ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */
+	if (cinfo->comps_in_scan == 0) /* unexpected pseudo SOS marker */
+	  break;
+	start_input_pass(cinfo);
+      }
+      return val;
+    case JPEG_REACHED_EOI:	/* Found EOI */
+      inputctl->pub.eoi_reached = TRUE;
+      if (inputctl->inheaders) { /* Tables-only datastream, apparently */
+	if (cinfo->marker->saw_SOF)
+	  ERREXIT(cinfo, JERR_SOF_NO_SOS);
+      } else {
+	/* Prevent infinite loop in coef ctlr's decompress_data routine
+	 * if user set output_scan_number larger than number of scans.
+	 */
+	if (cinfo->output_scan_number > cinfo->input_scan_number)
+	  cinfo->output_scan_number = cinfo->input_scan_number;
+      }
+      return val;
+    case JPEG_SUSPENDED:
+      return val;
+    default:
+      return val;
+    }
+  }
+}
+
+
+/*
+ * Reset state to begin a fresh datastream.
+ */
+
+METHODDEF(void)
+reset_input_controller (j_decompress_ptr cinfo)
+{
+  my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl;
+
+  inputctl->pub.consume_input = consume_markers;
+  inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */
+  inputctl->pub.eoi_reached = FALSE;
+  inputctl->inheaders = 1;
+  /* Reset other modules */
+  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
+  (*cinfo->marker->reset_marker_reader) (cinfo);
+  /* Reset progression state -- would be cleaner if entropy decoder did this */
+  cinfo->coef_bits = NULL;
+}
+
+
+/*
+ * Initialize the input controller module.
+ * This is called only once, when the decompression object is created.
+ */
+
+GLOBAL(void)
+jinit_input_controller (j_decompress_ptr cinfo)
+{
+  my_inputctl_ptr inputctl;
+
+  /* Create subobject in permanent pool */
+  inputctl = (my_inputctl_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				SIZEOF(my_input_controller));
+  cinfo->inputctl = (struct jpeg_input_controller *) inputctl;
+  /* Initialize method pointers */
+  inputctl->pub.consume_input = consume_markers;
+  inputctl->pub.reset_input_controller = reset_input_controller;
+  inputctl->pub.start_input_pass = start_input_pass;
+  inputctl->pub.finish_input_pass = finish_input_pass;
+  /* Initialize state: can't use reset_input_controller since we don't
+   * want to try to reset other modules yet.
+   */
+  inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */
+  inputctl->pub.eoi_reached = FALSE;
+  inputctl->inheaders = 1;
+}
diff --git a/jpeg-8d/jdmainct.c b/jpeg-8d/jdmainct.c
new file mode 100644
index 0000000..02723ca
--- /dev/null
+++ b/jpeg-8d/jdmainct.c
@@ -0,0 +1,512 @@
+/*
+ * jdmainct.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the main buffer controller for decompression.
+ * The main buffer lies between the JPEG decompressor proper and the
+ * post-processor; it holds downsampled data in the JPEG colorspace.
+ *
+ * Note that this code is bypassed in raw-data mode, since the application
+ * supplies the equivalent of the main buffer in that case.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * In the current system design, the main buffer need never be a full-image
+ * buffer; any full-height buffers will be found inside the coefficient or
+ * postprocessing controllers.  Nonetheless, the main controller is not
+ * trivial.  Its responsibility is to provide context rows for upsampling/
+ * rescaling, and doing this in an efficient fashion is a bit tricky.
+ *
+ * Postprocessor input data is counted in "row groups".  A row group
+ * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
+ * sample rows of each component.  (We require DCT_scaled_size values to be
+ * chosen such that these numbers are integers.  In practice DCT_scaled_size
+ * values will likely be powers of two, so we actually have the stronger
+ * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.)
+ * Upsampling will typically produce max_v_samp_factor pixel rows from each
+ * row group (times any additional scale factor that the upsampler is
+ * applying).
+ *
+ * The coefficient controller will deliver data to us one iMCU row at a time;
+ * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or
+ * exactly min_DCT_scaled_size row groups.  (This amount of data corresponds
+ * to one row of MCUs when the image is fully interleaved.)  Note that the
+ * number of sample rows varies across components, but the number of row
+ * groups does not.  Some garbage sample rows may be included in the last iMCU
+ * row at the bottom of the image.
+ *
+ * Depending on the vertical scaling algorithm used, the upsampler may need
+ * access to the sample row(s) above and below its current input row group.
+ * The upsampler is required to set need_context_rows TRUE at global selection
+ * time if so.  When need_context_rows is FALSE, this controller can simply
+ * obtain one iMCU row at a time from the coefficient controller and dole it
+ * out as row groups to the postprocessor.
+ *
+ * When need_context_rows is TRUE, this controller guarantees that the buffer
+ * passed to postprocessing contains at least one row group's worth of samples
+ * above and below the row group(s) being processed.  Note that the context
+ * rows "above" the first passed row group appear at negative row offsets in
+ * the passed buffer.  At the top and bottom of the image, the required
+ * context rows are manufactured by duplicating the first or last real sample
+ * row; this avoids having special cases in the upsampling inner loops.
+ *
+ * The amount of context is fixed at one row group just because that's a
+ * convenient number for this controller to work with.  The existing
+ * upsamplers really only need one sample row of context.  An upsampler
+ * supporting arbitrary output rescaling might wish for more than one row
+ * group of context when shrinking the image; tough, we don't handle that.
+ * (This is justified by the assumption that downsizing will be handled mostly
+ * by adjusting the DCT_scaled_size values, so that the actual scale factor at
+ * the upsample step needn't be much less than one.)
+ *
+ * To provide the desired context, we have to retain the last two row groups
+ * of one iMCU row while reading in the next iMCU row.  (The last row group
+ * can't be processed until we have another row group for its below-context,
+ * and so we have to save the next-to-last group too for its above-context.)
+ * We could do this most simply by copying data around in our buffer, but
+ * that'd be very slow.  We can avoid copying any data by creating a rather
+ * strange pointer structure.  Here's how it works.  We allocate a workspace
+ * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number
+ * of row groups per iMCU row).  We create two sets of redundant pointers to
+ * the workspace.  Labeling the physical row groups 0 to M+1, the synthesized
+ * pointer lists look like this:
+ *                   M+1                          M-1
+ * master pointer --> 0         master pointer --> 0
+ *                    1                            1
+ *                   ...                          ...
+ *                   M-3                          M-3
+ *                   M-2                           M
+ *                   M-1                          M+1
+ *                    M                           M-2
+ *                   M+1                          M-1
+ *                    0                            0
+ * We read alternate iMCU rows using each master pointer; thus the last two
+ * row groups of the previous iMCU row remain un-overwritten in the workspace.
+ * The pointer lists are set up so that the required context rows appear to
+ * be adjacent to the proper places when we pass the pointer lists to the
+ * upsampler.
+ *
+ * The above pictures describe the normal state of the pointer lists.
+ * At top and bottom of the image, we diddle the pointer lists to duplicate
+ * the first or last sample row as necessary (this is cheaper than copying
+ * sample rows around).
+ *
+ * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1.  In that
+ * situation each iMCU row provides only one row group so the buffering logic
+ * must be different (eg, we must read two iMCU rows before we can emit the
+ * first row group).  For now, we simply do not support providing context
+ * rows when min_DCT_scaled_size is 1.  That combination seems unlikely to
+ * be worth providing --- if someone wants a 1/8th-size preview, they probably
+ * want it quick and dirty, so a context-free upsampler is sufficient.
+ */
+
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_d_main_controller pub; /* public fields */
+
+  /* Pointer to allocated workspace (M or M+2 row groups). */
+  JSAMPARRAY buffer[MAX_COMPONENTS];
+
+  boolean buffer_full;		/* Have we gotten an iMCU row from decoder? */
+  JDIMENSION rowgroup_ctr;	/* counts row groups output to postprocessor */
+
+  /* Remaining fields are only used in the context case. */
+
+  /* These are the master pointers to the funny-order pointer lists. */
+  JSAMPIMAGE xbuffer[2];	/* pointers to weird pointer lists */
+
+  int whichptr;			/* indicates which pointer set is now in use */
+  int context_state;		/* process_data state machine status */
+  JDIMENSION rowgroups_avail;	/* row groups available to postprocessor */
+  JDIMENSION iMCU_row_ctr;	/* counts iMCU rows to detect image top/bot */
+} my_main_controller;
+
+typedef my_main_controller * my_main_ptr;
+
+/* context_state values: */
+#define CTX_PREPARE_FOR_IMCU	0	/* need to prepare for MCU row */
+#define CTX_PROCESS_IMCU	1	/* feeding iMCU to postprocessor */
+#define CTX_POSTPONED_ROW	2	/* feeding postponed row group */
+
+
+/* Forward declarations */
+METHODDEF(void) process_data_simple_main
+	JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
+	     JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
+METHODDEF(void) process_data_context_main
+	JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
+	     JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
+#ifdef QUANT_2PASS_SUPPORTED
+METHODDEF(void) process_data_crank_post
+	JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
+	     JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
+#endif
+
+
+LOCAL(void)
+alloc_funny_pointers (j_decompress_ptr cinfo)
+/* Allocate space for the funny pointer lists.
+ * This is done only once, not once per pass.
+ */
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  int ci, rgroup;
+  int M = cinfo->min_DCT_v_scaled_size;
+  jpeg_component_info *compptr;
+  JSAMPARRAY xbuf;
+
+  /* Get top-level space for component array pointers.
+   * We alloc both arrays with one call to save a few cycles.
+   */
+  main->xbuffer[0] = (JSAMPIMAGE)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				cinfo->num_components * 2 * SIZEOF(JSAMPARRAY));
+  main->xbuffer[1] = main->xbuffer[0] + cinfo->num_components;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+      cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
+    /* Get space for pointer lists --- M+4 row groups in each list.
+     * We alloc both pointer lists with one call to save a few cycles.
+     */
+    xbuf = (JSAMPARRAY)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW));
+    xbuf += rgroup;		/* want one row group at negative offsets */
+    main->xbuffer[0][ci] = xbuf;
+    xbuf += rgroup * (M + 4);
+    main->xbuffer[1][ci] = xbuf;
+  }
+}
+
+
+LOCAL(void)
+make_funny_pointers (j_decompress_ptr cinfo)
+/* Create the funny pointer lists discussed in the comments above.
+ * The actual workspace is already allocated (in main->buffer),
+ * and the space for the pointer lists is allocated too.
+ * This routine just fills in the curiously ordered lists.
+ * This will be repeated at the beginning of each pass.
+ */
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  int ci, i, rgroup;
+  int M = cinfo->min_DCT_v_scaled_size;
+  jpeg_component_info *compptr;
+  JSAMPARRAY buf, xbuf0, xbuf1;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+      cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
+    xbuf0 = main->xbuffer[0][ci];
+    xbuf1 = main->xbuffer[1][ci];
+    /* First copy the workspace pointers as-is */
+    buf = main->buffer[ci];
+    for (i = 0; i < rgroup * (M + 2); i++) {
+      xbuf0[i] = xbuf1[i] = buf[i];
+    }
+    /* In the second list, put the last four row groups in swapped order */
+    for (i = 0; i < rgroup * 2; i++) {
+      xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i];
+      xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i];
+    }
+    /* The wraparound pointers at top and bottom will be filled later
+     * (see set_wraparound_pointers, below).  Initially we want the "above"
+     * pointers to duplicate the first actual data line.  This only needs
+     * to happen in xbuffer[0].
+     */
+    for (i = 0; i < rgroup; i++) {
+      xbuf0[i - rgroup] = xbuf0[0];
+    }
+  }
+}
+
+
+LOCAL(void)
+set_wraparound_pointers (j_decompress_ptr cinfo)
+/* Set up the "wraparound" pointers at top and bottom of the pointer lists.
+ * This changes the pointer list state from top-of-image to the normal state.
+ */
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  int ci, i, rgroup;
+  int M = cinfo->min_DCT_v_scaled_size;
+  jpeg_component_info *compptr;
+  JSAMPARRAY xbuf0, xbuf1;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+      cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
+    xbuf0 = main->xbuffer[0][ci];
+    xbuf1 = main->xbuffer[1][ci];
+    for (i = 0; i < rgroup; i++) {
+      xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i];
+      xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i];
+      xbuf0[rgroup*(M+2) + i] = xbuf0[i];
+      xbuf1[rgroup*(M+2) + i] = xbuf1[i];
+    }
+  }
+}
+
+
+LOCAL(void)
+set_bottom_pointers (j_decompress_ptr cinfo)
+/* Change the pointer lists to duplicate the last sample row at the bottom
+ * of the image.  whichptr indicates which xbuffer holds the final iMCU row.
+ * Also sets rowgroups_avail to indicate number of nondummy row groups in row.
+ */
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  int ci, i, rgroup, iMCUheight, rows_left;
+  jpeg_component_info *compptr;
+  JSAMPARRAY xbuf;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Count sample rows in one iMCU row and in one row group */
+    iMCUheight = compptr->v_samp_factor * compptr->DCT_v_scaled_size;
+    rgroup = iMCUheight / cinfo->min_DCT_v_scaled_size;
+    /* Count nondummy sample rows remaining for this component */
+    rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight);
+    if (rows_left == 0) rows_left = iMCUheight;
+    /* Count nondummy row groups.  Should get same answer for each component,
+     * so we need only do it once.
+     */
+    if (ci == 0) {
+      main->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1);
+    }
+    /* Duplicate the last real sample row rgroup*2 times; this pads out the
+     * last partial rowgroup and ensures at least one full rowgroup of context.
+     */
+    xbuf = main->xbuffer[main->whichptr][ci];
+    for (i = 0; i < rgroup * 2; i++) {
+      xbuf[rows_left + i] = xbuf[rows_left-1];
+    }
+  }
+}
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF(void)
+start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+
+  switch (pass_mode) {
+  case JBUF_PASS_THRU:
+    if (cinfo->upsample->need_context_rows) {
+      main->pub.process_data = process_data_context_main;
+      make_funny_pointers(cinfo); /* Create the xbuffer[] lists */
+      main->whichptr = 0;	/* Read first iMCU row into xbuffer[0] */
+      main->context_state = CTX_PREPARE_FOR_IMCU;
+      main->iMCU_row_ctr = 0;
+    } else {
+      /* Simple case with no context needed */
+      main->pub.process_data = process_data_simple_main;
+    }
+    main->buffer_full = FALSE;	/* Mark buffer empty */
+    main->rowgroup_ctr = 0;
+    break;
+#ifdef QUANT_2PASS_SUPPORTED
+  case JBUF_CRANK_DEST:
+    /* For last pass of 2-pass quantization, just crank the postprocessor */
+    main->pub.process_data = process_data_crank_post;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    break;
+  }
+}
+
+
+/*
+ * Process some data.
+ * This handles the simple case where no context is required.
+ */
+
+METHODDEF(void)
+process_data_simple_main (j_decompress_ptr cinfo,
+			  JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+			  JDIMENSION out_rows_avail)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+  JDIMENSION rowgroups_avail;
+
+  /* Read input data if we haven't filled the main buffer yet */
+  if (! main->buffer_full) {
+    if (! (*cinfo->coef->decompress_data) (cinfo, main->buffer))
+      return;			/* suspension forced, can do nothing more */
+    main->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
+  }
+
+  /* There are always min_DCT_scaled_size row groups in an iMCU row. */
+  rowgroups_avail = (JDIMENSION) cinfo->min_DCT_v_scaled_size;
+  /* Note: at the bottom of the image, we may pass extra garbage row groups
+   * to the postprocessor.  The postprocessor has to check for bottom
+   * of image anyway (at row resolution), so no point in us doing it too.
+   */
+
+  /* Feed the postprocessor */
+  (*cinfo->post->post_process_data) (cinfo, main->buffer,
+				     &main->rowgroup_ctr, rowgroups_avail,
+				     output_buf, out_row_ctr, out_rows_avail);
+
+  /* Has postprocessor consumed all the data yet? If so, mark buffer empty */
+  if (main->rowgroup_ctr >= rowgroups_avail) {
+    main->buffer_full = FALSE;
+    main->rowgroup_ctr = 0;
+  }
+}
+
+
+/*
+ * Process some data.
+ * This handles the case where context rows must be provided.
+ */
+
+METHODDEF(void)
+process_data_context_main (j_decompress_ptr cinfo,
+			   JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+			   JDIMENSION out_rows_avail)
+{
+  my_main_ptr main = (my_main_ptr) cinfo->main;
+
+  /* Read input data if we haven't filled the main buffer yet */
+  if (! main->buffer_full) {
+    if (! (*cinfo->coef->decompress_data) (cinfo,
+					   main->xbuffer[main->whichptr]))
+      return;			/* suspension forced, can do nothing more */
+    main->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
+    main->iMCU_row_ctr++;	/* count rows received */
+  }
+
+  /* Postprocessor typically will not swallow all the input data it is handed
+   * in one call (due to filling the output buffer first).  Must be prepared
+   * to exit and restart.  This switch lets us keep track of how far we got.
+   * Note that each case falls through to the next on successful completion.
+   */
+  switch (main->context_state) {
+  case CTX_POSTPONED_ROW:
+    /* Call postprocessor using previously set pointers for postponed row */
+    (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr],
+			&main->rowgroup_ctr, main->rowgroups_avail,
+			output_buf, out_row_ctr, out_rows_avail);
+    if (main->rowgroup_ctr < main->rowgroups_avail)
+      return;			/* Need to suspend */
+    main->context_state = CTX_PREPARE_FOR_IMCU;
+    if (*out_row_ctr >= out_rows_avail)
+      return;			/* Postprocessor exactly filled output buf */
+    /*FALLTHROUGH*/
+  case CTX_PREPARE_FOR_IMCU:
+    /* Prepare to process first M-1 row groups of this iMCU row */
+    main->rowgroup_ctr = 0;
+    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size - 1);
+    /* Check for bottom of image: if so, tweak pointers to "duplicate"
+     * the last sample row, and adjust rowgroups_avail to ignore padding rows.
+     */
+    if (main->iMCU_row_ctr == cinfo->total_iMCU_rows)
+      set_bottom_pointers(cinfo);
+    main->context_state = CTX_PROCESS_IMCU;
+    /*FALLTHROUGH*/
+  case CTX_PROCESS_IMCU:
+    /* Call postprocessor using previously set pointers */
+    (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr],
+			&main->rowgroup_ctr, main->rowgroups_avail,
+			output_buf, out_row_ctr, out_rows_avail);
+    if (main->rowgroup_ctr < main->rowgroups_avail)
+      return;			/* Need to suspend */
+    /* After the first iMCU, change wraparound pointers to normal state */
+    if (main->iMCU_row_ctr == 1)
+      set_wraparound_pointers(cinfo);
+    /* Prepare to load new iMCU row using other xbuffer list */
+    main->whichptr ^= 1;	/* 0=>1 or 1=>0 */
+    main->buffer_full = FALSE;
+    /* Still need to process last row group of this iMCU row, */
+    /* which is saved at index M+1 of the other xbuffer */
+    main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 1);
+    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 2);
+    main->context_state = CTX_POSTPONED_ROW;
+  }
+}
+
+
+/*
+ * Process some data.
+ * Final pass of two-pass quantization: just call the postprocessor.
+ * Source data will be the postprocessor controller's internal buffer.
+ */
+
+#ifdef QUANT_2PASS_SUPPORTED
+
+METHODDEF(void)
+process_data_crank_post (j_decompress_ptr cinfo,
+			 JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+			 JDIMENSION out_rows_avail)
+{
+  (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL,
+				     (JDIMENSION *) NULL, (JDIMENSION) 0,
+				     output_buf, out_row_ctr, out_rows_avail);
+}
+
+#endif /* QUANT_2PASS_SUPPORTED */
+
+
+/*
+ * Initialize main buffer controller.
+ */
+
+GLOBAL(void)
+jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
+{
+  my_main_ptr main;
+  int ci, rgroup, ngroups;
+  jpeg_component_info *compptr;
+
+  main = (my_main_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_main_controller));
+  cinfo->main = (struct jpeg_d_main_controller *) main;
+  main->pub.start_pass = start_pass_main;
+
+  if (need_full_buffer)		/* shouldn't happen */
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+
+  /* Allocate the workspace.
+   * ngroups is the number of row groups we need.
+   */
+  if (cinfo->upsample->need_context_rows) {
+    if (cinfo->min_DCT_v_scaled_size < 2) /* unsupported, see comments above */
+      ERREXIT(cinfo, JERR_NOTIMPL);
+    alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */
+    ngroups = cinfo->min_DCT_v_scaled_size + 2;
+  } else {
+    ngroups = cinfo->min_DCT_v_scaled_size;
+  }
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+      cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
+    main->buffer[ci] = (*cinfo->mem->alloc_sarray)
+			((j_common_ptr) cinfo, JPOOL_IMAGE,
+			 compptr->width_in_blocks * compptr->DCT_h_scaled_size,
+			 (JDIMENSION) (rgroup * ngroups));
+  }
+}
diff --git a/jpeg-8d/jdmarker.c b/jpeg-8d/jdmarker.c
new file mode 100644
index 0000000..f2a9cc4
--- /dev/null
+++ b/jpeg-8d/jdmarker.c
@@ -0,0 +1,1406 @@
+/*
+ * jdmarker.c
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to decode JPEG datastream markers.
+ * Most of the complexity arises from our desire to support input
+ * suspension: if not all of the data for a marker is available,
+ * we must exit back to the application.  On resumption, we reprocess
+ * the marker.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+typedef enum {			/* JPEG marker codes */
+  M_SOF0  = 0xc0,
+  M_SOF1  = 0xc1,
+  M_SOF2  = 0xc2,
+  M_SOF3  = 0xc3,
+  
+  M_SOF5  = 0xc5,
+  M_SOF6  = 0xc6,
+  M_SOF7  = 0xc7,
+  
+  M_JPG   = 0xc8,
+  M_SOF9  = 0xc9,
+  M_SOF10 = 0xca,
+  M_SOF11 = 0xcb,
+  
+  M_SOF13 = 0xcd,
+  M_SOF14 = 0xce,
+  M_SOF15 = 0xcf,
+  
+  M_DHT   = 0xc4,
+  
+  M_DAC   = 0xcc,
+  
+  M_RST0  = 0xd0,
+  M_RST1  = 0xd1,
+  M_RST2  = 0xd2,
+  M_RST3  = 0xd3,
+  M_RST4  = 0xd4,
+  M_RST5  = 0xd5,
+  M_RST6  = 0xd6,
+  M_RST7  = 0xd7,
+  
+  M_SOI   = 0xd8,
+  M_EOI   = 0xd9,
+  M_SOS   = 0xda,
+  M_DQT   = 0xdb,
+  M_DNL   = 0xdc,
+  M_DRI   = 0xdd,
+  M_DHP   = 0xde,
+  M_EXP   = 0xdf,
+  
+  M_APP0  = 0xe0,
+  M_APP1  = 0xe1,
+  M_APP2  = 0xe2,
+  M_APP3  = 0xe3,
+  M_APP4  = 0xe4,
+  M_APP5  = 0xe5,
+  M_APP6  = 0xe6,
+  M_APP7  = 0xe7,
+  M_APP8  = 0xe8,
+  M_APP9  = 0xe9,
+  M_APP10 = 0xea,
+  M_APP11 = 0xeb,
+  M_APP12 = 0xec,
+  M_APP13 = 0xed,
+  M_APP14 = 0xee,
+  M_APP15 = 0xef,
+  
+  M_JPG0  = 0xf0,
+  M_JPG13 = 0xfd,
+  M_COM   = 0xfe,
+  
+  M_TEM   = 0x01,
+  
+  M_ERROR = 0x100
+} JPEG_MARKER;
+
+
+/* Private state */
+
+typedef struct {
+  struct jpeg_marker_reader pub; /* public fields */
+
+  /* Application-overridable marker processing methods */
+  jpeg_marker_parser_method process_COM;
+  jpeg_marker_parser_method process_APPn[16];
+
+  /* Limit on marker data length to save for each marker type */
+  unsigned int length_limit_COM;
+  unsigned int length_limit_APPn[16];
+
+  /* Status of COM/APPn marker saving */
+  jpeg_saved_marker_ptr cur_marker;	/* NULL if not processing a marker */
+  unsigned int bytes_read;		/* data bytes read so far in marker */
+  /* Note: cur_marker is not linked into marker_list until it's all read. */
+} my_marker_reader;
+
+typedef my_marker_reader * my_marker_ptr;
+
+
+/*
+ * Macros for fetching data from the data source module.
+ *
+ * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect
+ * the current restart point; we update them only when we have reached a
+ * suitable place to restart if a suspension occurs.
+ */
+
+/* Declare and initialize local copies of input pointer/count */
+#define INPUT_VARS(cinfo)  \
+	struct jpeg_source_mgr * datasrc = (cinfo)->src;  \
+	const JOCTET * next_input_byte = datasrc->next_input_byte;  \
+	size_t bytes_in_buffer = datasrc->bytes_in_buffer
+
+/* Unload the local copies --- do this only at a restart boundary */
+#define INPUT_SYNC(cinfo)  \
+	( datasrc->next_input_byte = next_input_byte,  \
+	  datasrc->bytes_in_buffer = bytes_in_buffer )
+
+/* Reload the local copies --- used only in MAKE_BYTE_AVAIL */
+#define INPUT_RELOAD(cinfo)  \
+	( next_input_byte = datasrc->next_input_byte,  \
+	  bytes_in_buffer = datasrc->bytes_in_buffer )
+
+/* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available.
+ * Note we do *not* do INPUT_SYNC before calling fill_input_buffer,
+ * but we must reload the local copies after a successful fill.
+ */
+#define MAKE_BYTE_AVAIL(cinfo,action)  \
+	if (bytes_in_buffer == 0) {  \
+	  if (! (*datasrc->fill_input_buffer) (cinfo))  \
+	    { action; }  \
+	  INPUT_RELOAD(cinfo);  \
+	}
+
+/* Read a byte into variable V.
+ * If must suspend, take the specified action (typically "return FALSE").
+ */
+#define INPUT_BYTE(cinfo,V,action)  \
+	MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \
+		  bytes_in_buffer--; \
+		  V = GETJOCTET(*next_input_byte++); )
+
+/* As above, but read two bytes interpreted as an unsigned 16-bit integer.
+ * V should be declared unsigned int or perhaps INT32.
+ */
+#define INPUT_2BYTES(cinfo,V,action)  \
+	MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \
+		  bytes_in_buffer--; \
+		  V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \
+		  MAKE_BYTE_AVAIL(cinfo,action); \
+		  bytes_in_buffer--; \
+		  V += GETJOCTET(*next_input_byte++); )
+
+
+/*
+ * Routines to process JPEG markers.
+ *
+ * Entry condition: JPEG marker itself has been read and its code saved
+ *   in cinfo->unread_marker; input restart point is just after the marker.
+ *
+ * Exit: if return TRUE, have read and processed any parameters, and have
+ *   updated the restart point to point after the parameters.
+ *   If return FALSE, was forced to suspend before reaching end of
+ *   marker parameters; restart point has not been moved.  Same routine
+ *   will be called again after application supplies more input data.
+ *
+ * This approach to suspension assumes that all of a marker's parameters
+ * can fit into a single input bufferload.  This should hold for "normal"
+ * markers.  Some COM/APPn markers might have large parameter segments
+ * that might not fit.  If we are simply dropping such a marker, we use
+ * skip_input_data to get past it, and thereby put the problem on the
+ * source manager's shoulders.  If we are saving the marker's contents
+ * into memory, we use a slightly different convention: when forced to
+ * suspend, the marker processor updates the restart point to the end of
+ * what it's consumed (ie, the end of the buffer) before returning FALSE.
+ * On resumption, cinfo->unread_marker still contains the marker code,
+ * but the data source will point to the next chunk of marker data.
+ * The marker processor must retain internal state to deal with this.
+ *
+ * Note that we don't bother to avoid duplicate trace messages if a
+ * suspension occurs within marker parameters.  Other side effects
+ * require more care.
+ */
+
+
+LOCAL(boolean)
+get_soi (j_decompress_ptr cinfo)
+/* Process an SOI marker */
+{
+  int i;
+  
+  TRACEMS(cinfo, 1, JTRC_SOI);
+
+  if (cinfo->marker->saw_SOI)
+    ERREXIT(cinfo, JERR_SOI_DUPLICATE);
+
+  /* Reset all parameters that are defined to be reset by SOI */
+
+  for (i = 0; i < NUM_ARITH_TBLS; i++) {
+    cinfo->arith_dc_L[i] = 0;
+    cinfo->arith_dc_U[i] = 1;
+    cinfo->arith_ac_K[i] = 5;
+  }
+  cinfo->restart_interval = 0;
+
+  /* Set initial assumptions for colorspace etc */
+
+  cinfo->jpeg_color_space = JCS_UNKNOWN;
+  cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */
+
+  cinfo->saw_JFIF_marker = FALSE;
+  cinfo->JFIF_major_version = 1; /* set default JFIF APP0 values */
+  cinfo->JFIF_minor_version = 1;
+  cinfo->density_unit = 0;
+  cinfo->X_density = 1;
+  cinfo->Y_density = 1;
+  cinfo->saw_Adobe_marker = FALSE;
+  cinfo->Adobe_transform = 0;
+
+  cinfo->marker->saw_SOI = TRUE;
+
+  return TRUE;
+}
+
+
+LOCAL(boolean)
+get_sof (j_decompress_ptr cinfo, boolean is_baseline, boolean is_prog,
+	 boolean is_arith)
+/* Process a SOFn marker */
+{
+  INT32 length;
+  int c, ci;
+  jpeg_component_info * compptr;
+  INPUT_VARS(cinfo);
+
+  cinfo->is_baseline = is_baseline;
+  cinfo->progressive_mode = is_prog;
+  cinfo->arith_code = is_arith;
+
+  INPUT_2BYTES(cinfo, length, return FALSE);
+
+  INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE);
+  INPUT_2BYTES(cinfo, cinfo->image_height, return FALSE);
+  INPUT_2BYTES(cinfo, cinfo->image_width, return FALSE);
+  INPUT_BYTE(cinfo, cinfo->num_components, return FALSE);
+
+  length -= 8;
+
+  TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker,
+	   (int) cinfo->image_width, (int) cinfo->image_height,
+	   cinfo->num_components);
+
+  if (cinfo->marker->saw_SOF)
+    ERREXIT(cinfo, JERR_SOF_DUPLICATE);
+
+  /* We don't support files in which the image height is initially specified */
+  /* as 0 and is later redefined by DNL.  As long as we have to check that,  */
+  /* might as well have a general sanity check. */
+  if (cinfo->image_height <= 0 || cinfo->image_width <= 0
+      || cinfo->num_components <= 0)
+    ERREXIT(cinfo, JERR_EMPTY_IMAGE);
+
+  if (length != (cinfo->num_components * 3))
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
+  if (cinfo->comp_info == NULL)	/* do only once, even if suspend */
+    cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small)
+			((j_common_ptr) cinfo, JPOOL_IMAGE,
+			 cinfo->num_components * SIZEOF(jpeg_component_info));
+  
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    compptr->component_index = ci;
+    INPUT_BYTE(cinfo, compptr->component_id, return FALSE);
+    INPUT_BYTE(cinfo, c, return FALSE);
+    compptr->h_samp_factor = (c >> 4) & 15;
+    compptr->v_samp_factor = (c     ) & 15;
+    INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE);
+
+    TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT,
+	     compptr->component_id, compptr->h_samp_factor,
+	     compptr->v_samp_factor, compptr->quant_tbl_no);
+  }
+
+  cinfo->marker->saw_SOF = TRUE;
+
+  INPUT_SYNC(cinfo);
+  return TRUE;
+}
+
+
+LOCAL(boolean)
+get_sos (j_decompress_ptr cinfo)
+/* Process a SOS marker */
+{
+  INT32 length;
+  int i, ci, n, c, cc;
+  jpeg_component_info * compptr;
+  INPUT_VARS(cinfo);
+
+  if (! cinfo->marker->saw_SOF)
+    ERREXIT(cinfo, JERR_SOS_NO_SOF);
+
+  INPUT_2BYTES(cinfo, length, return FALSE);
+
+  INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */
+
+  TRACEMS1(cinfo, 1, JTRC_SOS, n);
+
+  if (length != (n * 2 + 6) || n > MAX_COMPS_IN_SCAN ||
+      (n == 0 && !cinfo->progressive_mode))
+      /* pseudo SOS marker only allowed in progressive mode */
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
+  cinfo->comps_in_scan = n;
+
+  /* Collect the component-spec parameters */
+
+  for (i = 0; i < n; i++) {
+    INPUT_BYTE(cinfo, cc, return FALSE);
+    INPUT_BYTE(cinfo, c, return FALSE);
+    
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      if (cc == compptr->component_id)
+	goto id_found;
+    }
+
+    ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc);
+
+  id_found:
+
+    cinfo->cur_comp_info[i] = compptr;
+    compptr->dc_tbl_no = (c >> 4) & 15;
+    compptr->ac_tbl_no = (c     ) & 15;
+    
+    TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc,
+	     compptr->dc_tbl_no, compptr->ac_tbl_no);
+  }
+
+  /* Collect the additional scan parameters Ss, Se, Ah/Al. */
+  INPUT_BYTE(cinfo, c, return FALSE);
+  cinfo->Ss = c;
+  INPUT_BYTE(cinfo, c, return FALSE);
+  cinfo->Se = c;
+  INPUT_BYTE(cinfo, c, return FALSE);
+  cinfo->Ah = (c >> 4) & 15;
+  cinfo->Al = (c     ) & 15;
+
+  TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se,
+	   cinfo->Ah, cinfo->Al);
+
+  /* Prepare to scan data & restart markers */
+  cinfo->marker->next_restart_num = 0;
+
+  /* Count another (non-pseudo) SOS marker */
+  if (n) cinfo->input_scan_number++;
+
+  INPUT_SYNC(cinfo);
+  return TRUE;
+}
+
+
+#ifdef D_ARITH_CODING_SUPPORTED
+
+LOCAL(boolean)
+get_dac (j_decompress_ptr cinfo)
+/* Process a DAC marker */
+{
+  INT32 length;
+  int index, val;
+  INPUT_VARS(cinfo);
+
+  INPUT_2BYTES(cinfo, length, return FALSE);
+  length -= 2;
+  
+  while (length > 0) {
+    INPUT_BYTE(cinfo, index, return FALSE);
+    INPUT_BYTE(cinfo, val, return FALSE);
+
+    length -= 2;
+
+    TRACEMS2(cinfo, 1, JTRC_DAC, index, val);
+
+    if (index < 0 || index >= (2*NUM_ARITH_TBLS))
+      ERREXIT1(cinfo, JERR_DAC_INDEX, index);
+
+    if (index >= NUM_ARITH_TBLS) { /* define AC table */
+      cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val;
+    } else {			/* define DC table */
+      cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F);
+      cinfo->arith_dc_U[index] = (UINT8) (val >> 4);
+      if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index])
+	ERREXIT1(cinfo, JERR_DAC_VALUE, val);
+    }
+  }
+
+  if (length != 0)
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
+  INPUT_SYNC(cinfo);
+  return TRUE;
+}
+
+#else /* ! D_ARITH_CODING_SUPPORTED */
+
+#define get_dac(cinfo)  skip_variable(cinfo)
+
+#endif /* D_ARITH_CODING_SUPPORTED */
+
+
+LOCAL(boolean)
+get_dht (j_decompress_ptr cinfo)
+/* Process a DHT marker */
+{
+  INT32 length;
+  UINT8 bits[17];
+  UINT8 huffval[256];
+  int i, index, count;
+  JHUFF_TBL **htblptr;
+  INPUT_VARS(cinfo);
+
+  INPUT_2BYTES(cinfo, length, return FALSE);
+  length -= 2;
+  
+  while (length > 16) {
+    INPUT_BYTE(cinfo, index, return FALSE);
+
+    TRACEMS1(cinfo, 1, JTRC_DHT, index);
+      
+    bits[0] = 0;
+    count = 0;
+    for (i = 1; i <= 16; i++) {
+      INPUT_BYTE(cinfo, bits[i], return FALSE);
+      count += bits[i];
+    }
+
+    length -= 1 + 16;
+
+    TRACEMS8(cinfo, 2, JTRC_HUFFBITS,
+	     bits[1], bits[2], bits[3], bits[4],
+	     bits[5], bits[6], bits[7], bits[8]);
+    TRACEMS8(cinfo, 2, JTRC_HUFFBITS,
+	     bits[9], bits[10], bits[11], bits[12],
+	     bits[13], bits[14], bits[15], bits[16]);
+
+    /* Here we just do minimal validation of the counts to avoid walking
+     * off the end of our table space.  jdhuff.c will check more carefully.
+     */
+    if (count > 256 || ((INT32) count) > length)
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+
+    for (i = 0; i < count; i++)
+      INPUT_BYTE(cinfo, huffval[i], return FALSE);
+
+    length -= count;
+
+    if (index & 0x10) {		/* AC table definition */
+      index -= 0x10;
+      htblptr = &cinfo->ac_huff_tbl_ptrs[index];
+    } else {			/* DC table definition */
+      htblptr = &cinfo->dc_huff_tbl_ptrs[index];
+    }
+
+    if (index < 0 || index >= NUM_HUFF_TBLS)
+      ERREXIT1(cinfo, JERR_DHT_INDEX, index);
+
+    if (*htblptr == NULL)
+      *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
+  
+    MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits));
+    MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval));
+  }
+
+  if (length != 0)
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
+  INPUT_SYNC(cinfo);
+  return TRUE;
+}
+
+
+LOCAL(boolean)
+get_dqt (j_decompress_ptr cinfo)
+/* Process a DQT marker */
+{
+  INT32 length, count, i;
+  int n, prec;
+  unsigned int tmp;
+  JQUANT_TBL *quant_ptr;
+  const int *natural_order;
+  INPUT_VARS(cinfo);
+
+  INPUT_2BYTES(cinfo, length, return FALSE);
+  length -= 2;
+
+  while (length > 0) {
+    length--;
+    INPUT_BYTE(cinfo, n, return FALSE);
+    prec = n >> 4;
+    n &= 0x0F;
+
+    TRACEMS2(cinfo, 1, JTRC_DQT, n, prec);
+
+    if (n >= NUM_QUANT_TBLS)
+      ERREXIT1(cinfo, JERR_DQT_INDEX, n);
+      
+    if (cinfo->quant_tbl_ptrs[n] == NULL)
+      cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo);
+    quant_ptr = cinfo->quant_tbl_ptrs[n];
+
+    if (prec) {
+      if (length < DCTSIZE2 * 2) {
+	/* Initialize full table for safety. */
+	for (i = 0; i < DCTSIZE2; i++) {
+	  quant_ptr->quantval[i] = 1;
+	}
+	count = length >> 1;
+      } else
+	count = DCTSIZE2;
+    } else {
+      if (length < DCTSIZE2) {
+	/* Initialize full table for safety. */
+	for (i = 0; i < DCTSIZE2; i++) {
+	  quant_ptr->quantval[i] = 1;
+	}
+	count = length;
+      } else
+	count = DCTSIZE2;
+    }
+
+    switch (count) {
+    case (2*2): natural_order = jpeg_natural_order2; break;
+    case (3*3): natural_order = jpeg_natural_order3; break;
+    case (4*4): natural_order = jpeg_natural_order4; break;
+    case (5*5): natural_order = jpeg_natural_order5; break;
+    case (6*6): natural_order = jpeg_natural_order6; break;
+    case (7*7): natural_order = jpeg_natural_order7; break;
+    default:    natural_order = jpeg_natural_order;  break;
+    }
+
+    for (i = 0; i < count; i++) {
+      if (prec)
+	INPUT_2BYTES(cinfo, tmp, return FALSE);
+      else
+	INPUT_BYTE(cinfo, tmp, return FALSE);
+      /* We convert the zigzag-order table to natural array order. */
+      quant_ptr->quantval[natural_order[i]] = (UINT16) tmp;
+    }
+
+    if (cinfo->err->trace_level >= 2) {
+      for (i = 0; i < DCTSIZE2; i += 8) {
+	TRACEMS8(cinfo, 2, JTRC_QUANTVALS,
+		 quant_ptr->quantval[i],   quant_ptr->quantval[i+1],
+		 quant_ptr->quantval[i+2], quant_ptr->quantval[i+3],
+		 quant_ptr->quantval[i+4], quant_ptr->quantval[i+5],
+		 quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]);
+      }
+    }
+
+    length -= count;
+    if (prec) length -= count;
+  }
+
+  if (length != 0)
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
+  INPUT_SYNC(cinfo);
+  return TRUE;
+}
+
+
+LOCAL(boolean)
+get_dri (j_decompress_ptr cinfo)
+/* Process a DRI marker */
+{
+  INT32 length;
+  unsigned int tmp;
+  INPUT_VARS(cinfo);
+
+  INPUT_2BYTES(cinfo, length, return FALSE);
+  
+  if (length != 4)
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+
+  TRACEMS1(cinfo, 1, JTRC_DRI, tmp);
+
+  cinfo->restart_interval = tmp;
+
+  INPUT_SYNC(cinfo);
+  return TRUE;
+}
+
+
+/*
+ * Routines for processing APPn and COM markers.
+ * These are either saved in memory or discarded, per application request.
+ * APP0 and APP14 are specially checked to see if they are
+ * JFIF and Adobe markers, respectively.
+ */
+
+#define APP0_DATA_LEN	14	/* Length of interesting data in APP0 */
+#define APP14_DATA_LEN	12	/* Length of interesting data in APP14 */
+#define APPN_DATA_LEN	14	/* Must be the largest of the above!! */
+
+
+LOCAL(void)
+examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data,
+	      unsigned int datalen, INT32 remaining)
+/* Examine first few bytes from an APP0.
+ * Take appropriate action if it is a JFIF marker.
+ * datalen is # of bytes at data[], remaining is length of rest of marker data.
+ */
+{
+  INT32 totallen = (INT32) datalen + remaining;
+
+  if (datalen >= APP0_DATA_LEN &&
+      GETJOCTET(data[0]) == 0x4A &&
+      GETJOCTET(data[1]) == 0x46 &&
+      GETJOCTET(data[2]) == 0x49 &&
+      GETJOCTET(data[3]) == 0x46 &&
+      GETJOCTET(data[4]) == 0) {
+    /* Found JFIF APP0 marker: save info */
+    cinfo->saw_JFIF_marker = TRUE;
+    cinfo->JFIF_major_version = GETJOCTET(data[5]);
+    cinfo->JFIF_minor_version = GETJOCTET(data[6]);
+    cinfo->density_unit = GETJOCTET(data[7]);
+    cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]);
+    cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]);
+    /* Check version.
+     * Major version must be 1, anything else signals an incompatible change.
+     * (We used to treat this as an error, but now it's a nonfatal warning,
+     * because some bozo at Hijaak couldn't read the spec.)
+     * Minor version should be 0..2, but process anyway if newer.
+     */
+    if (cinfo->JFIF_major_version != 1)
+      WARNMS2(cinfo, JWRN_JFIF_MAJOR,
+	      cinfo->JFIF_major_version, cinfo->JFIF_minor_version);
+    /* Generate trace messages */
+    TRACEMS5(cinfo, 1, JTRC_JFIF,
+	     cinfo->JFIF_major_version, cinfo->JFIF_minor_version,
+	     cinfo->X_density, cinfo->Y_density, cinfo->density_unit);
+    /* Validate thumbnail dimensions and issue appropriate messages */
+    if (GETJOCTET(data[12]) | GETJOCTET(data[13]))
+      TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL,
+	       GETJOCTET(data[12]), GETJOCTET(data[13]));
+    totallen -= APP0_DATA_LEN;
+    if (totallen !=
+	((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3))
+      TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen);
+  } else if (datalen >= 6 &&
+      GETJOCTET(data[0]) == 0x4A &&
+      GETJOCTET(data[1]) == 0x46 &&
+      GETJOCTET(data[2]) == 0x58 &&
+      GETJOCTET(data[3]) == 0x58 &&
+      GETJOCTET(data[4]) == 0) {
+    /* Found JFIF "JFXX" extension APP0 marker */
+    /* The library doesn't actually do anything with these,
+     * but we try to produce a helpful trace message.
+     */
+    switch (GETJOCTET(data[5])) {
+    case 0x10:
+      TRACEMS1(cinfo, 1, JTRC_THUMB_JPEG, (int) totallen);
+      break;
+    case 0x11:
+      TRACEMS1(cinfo, 1, JTRC_THUMB_PALETTE, (int) totallen);
+      break;
+    case 0x13:
+      TRACEMS1(cinfo, 1, JTRC_THUMB_RGB, (int) totallen);
+      break;
+    default:
+      TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION,
+	       GETJOCTET(data[5]), (int) totallen);
+      break;
+    }
+  } else {
+    /* Start of APP0 does not match "JFIF" or "JFXX", or too short */
+    TRACEMS1(cinfo, 1, JTRC_APP0, (int) totallen);
+  }
+}
+
+
+LOCAL(void)
+examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data,
+	       unsigned int datalen, INT32 remaining)
+/* Examine first few bytes from an APP14.
+ * Take appropriate action if it is an Adobe marker.
+ * datalen is # of bytes at data[], remaining is length of rest of marker data.
+ */
+{
+  unsigned int version, flags0, flags1, transform;
+
+  if (datalen >= APP14_DATA_LEN &&
+      GETJOCTET(data[0]) == 0x41 &&
+      GETJOCTET(data[1]) == 0x64 &&
+      GETJOCTET(data[2]) == 0x6F &&
+      GETJOCTET(data[3]) == 0x62 &&
+      GETJOCTET(data[4]) == 0x65) {
+    /* Found Adobe APP14 marker */
+    version = (GETJOCTET(data[5]) << 8) + GETJOCTET(data[6]);
+    flags0 = (GETJOCTET(data[7]) << 8) + GETJOCTET(data[8]);
+    flags1 = (GETJOCTET(data[9]) << 8) + GETJOCTET(data[10]);
+    transform = GETJOCTET(data[11]);
+    TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform);
+    cinfo->saw_Adobe_marker = TRUE;
+    cinfo->Adobe_transform = (UINT8) transform;
+  } else {
+    /* Start of APP14 does not match "Adobe", or too short */
+    TRACEMS1(cinfo, 1, JTRC_APP14, (int) (datalen + remaining));
+  }
+}
+
+
+METHODDEF(boolean)
+get_interesting_appn (j_decompress_ptr cinfo)
+/* Process an APP0 or APP14 marker without saving it */
+{
+  INT32 length;
+  JOCTET b[APPN_DATA_LEN];
+  unsigned int i, numtoread;
+  INPUT_VARS(cinfo);
+
+  INPUT_2BYTES(cinfo, length, return FALSE);
+  length -= 2;
+
+  /* get the interesting part of the marker data */
+  if (length >= APPN_DATA_LEN)
+    numtoread = APPN_DATA_LEN;
+  else if (length > 0)
+    numtoread = (unsigned int) length;
+  else
+    numtoread = 0;
+  for (i = 0; i < numtoread; i++)
+    INPUT_BYTE(cinfo, b[i], return FALSE);
+  length -= numtoread;
+
+  /* process it */
+  switch (cinfo->unread_marker) {
+  case M_APP0:
+    examine_app0(cinfo, (JOCTET FAR *) b, numtoread, length);
+    break;
+  case M_APP14:
+    examine_app14(cinfo, (JOCTET FAR *) b, numtoread, length);
+    break;
+  default:
+    /* can't get here unless jpeg_save_markers chooses wrong processor */
+    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker);
+    break;
+  }
+
+  /* skip any remaining data -- could be lots */
+  INPUT_SYNC(cinfo);
+  if (length > 0)
+    (*cinfo->src->skip_input_data) (cinfo, (long) length);
+
+  return TRUE;
+}
+
+
+#ifdef SAVE_MARKERS_SUPPORTED
+
+METHODDEF(boolean)
+save_marker (j_decompress_ptr cinfo)
+/* Save an APPn or COM marker into the marker list */
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+  jpeg_saved_marker_ptr cur_marker = marker->cur_marker;
+  unsigned int bytes_read, data_length;
+  JOCTET FAR * data;
+  INT32 length = 0;
+  INPUT_VARS(cinfo);
+
+  if (cur_marker == NULL) {
+    /* begin reading a marker */
+    INPUT_2BYTES(cinfo, length, return FALSE);
+    length -= 2;
+    if (length >= 0) {		/* watch out for bogus length word */
+      /* figure out how much we want to save */
+      unsigned int limit;
+      if (cinfo->unread_marker == (int) M_COM)
+	limit = marker->length_limit_COM;
+      else
+	limit = marker->length_limit_APPn[cinfo->unread_marker - (int) M_APP0];
+      if ((unsigned int) length < limit)
+	limit = (unsigned int) length;
+      /* allocate and initialize the marker item */
+      cur_marker = (jpeg_saved_marker_ptr)
+	(*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				    SIZEOF(struct jpeg_marker_struct) + limit);
+      cur_marker->next = NULL;
+      cur_marker->marker = (UINT8) cinfo->unread_marker;
+      cur_marker->original_length = (unsigned int) length;
+      cur_marker->data_length = limit;
+      /* data area is just beyond the jpeg_marker_struct */
+      data = cur_marker->data = (JOCTET FAR *) (cur_marker + 1);
+      marker->cur_marker = cur_marker;
+      marker->bytes_read = 0;
+      bytes_read = 0;
+      data_length = limit;
+    } else {
+      /* deal with bogus length word */
+      bytes_read = data_length = 0;
+      data = NULL;
+    }
+  } else {
+    /* resume reading a marker */
+    bytes_read = marker->bytes_read;
+    data_length = cur_marker->data_length;
+    data = cur_marker->data + bytes_read;
+  }
+
+  while (bytes_read < data_length) {
+    INPUT_SYNC(cinfo);		/* move the restart point to here */
+    marker->bytes_read = bytes_read;
+    /* If there's not at least one byte in buffer, suspend */
+    MAKE_BYTE_AVAIL(cinfo, return FALSE);
+    /* Copy bytes with reasonable rapidity */
+    while (bytes_read < data_length && bytes_in_buffer > 0) {
+      *data++ = *next_input_byte++;
+      bytes_in_buffer--;
+      bytes_read++;
+    }
+  }
+
+  /* Done reading what we want to read */
+  if (cur_marker != NULL) {	/* will be NULL if bogus length word */
+    /* Add new marker to end of list */
+    if (cinfo->marker_list == NULL) {
+      cinfo->marker_list = cur_marker;
+    } else {
+      jpeg_saved_marker_ptr prev = cinfo->marker_list;
+      while (prev->next != NULL)
+	prev = prev->next;
+      prev->next = cur_marker;
+    }
+    /* Reset pointer & calc remaining data length */
+    data = cur_marker->data;
+    length = cur_marker->original_length - data_length;
+  }
+  /* Reset to initial state for next marker */
+  marker->cur_marker = NULL;
+
+  /* Process the marker if interesting; else just make a generic trace msg */
+  switch (cinfo->unread_marker) {
+  case M_APP0:
+    examine_app0(cinfo, data, data_length, length);
+    break;
+  case M_APP14:
+    examine_app14(cinfo, data, data_length, length);
+    break;
+  default:
+    TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker,
+	     (int) (data_length + length));
+    break;
+  }
+
+  /* skip any remaining data -- could be lots */
+  INPUT_SYNC(cinfo);		/* do before skip_input_data */
+  if (length > 0)
+    (*cinfo->src->skip_input_data) (cinfo, (long) length);
+
+  return TRUE;
+}
+
+#endif /* SAVE_MARKERS_SUPPORTED */
+
+
+METHODDEF(boolean)
+skip_variable (j_decompress_ptr cinfo)
+/* Skip over an unknown or uninteresting variable-length marker */
+{
+  INT32 length;
+  INPUT_VARS(cinfo);
+
+  INPUT_2BYTES(cinfo, length, return FALSE);
+  length -= 2;
+  
+  TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length);
+
+  INPUT_SYNC(cinfo);		/* do before skip_input_data */
+  if (length > 0)
+    (*cinfo->src->skip_input_data) (cinfo, (long) length);
+
+  return TRUE;
+}
+
+
+/*
+ * Find the next JPEG marker, save it in cinfo->unread_marker.
+ * Returns FALSE if had to suspend before reaching a marker;
+ * in that case cinfo->unread_marker is unchanged.
+ *
+ * Note that the result might not be a valid marker code,
+ * but it will never be 0 or FF.
+ */
+
+LOCAL(boolean)
+next_marker (j_decompress_ptr cinfo)
+{
+  int c;
+  INPUT_VARS(cinfo);
+
+  for (;;) {
+    INPUT_BYTE(cinfo, c, return FALSE);
+    /* Skip any non-FF bytes.
+     * This may look a bit inefficient, but it will not occur in a valid file.
+     * We sync after each discarded byte so that a suspending data source
+     * can discard the byte from its buffer.
+     */
+    while (c != 0xFF) {
+      cinfo->marker->discarded_bytes++;
+      INPUT_SYNC(cinfo);
+      INPUT_BYTE(cinfo, c, return FALSE);
+    }
+    /* This loop swallows any duplicate FF bytes.  Extra FFs are legal as
+     * pad bytes, so don't count them in discarded_bytes.  We assume there
+     * will not be so many consecutive FF bytes as to overflow a suspending
+     * data source's input buffer.
+     */
+    do {
+      INPUT_BYTE(cinfo, c, return FALSE);
+    } while (c == 0xFF);
+    if (c != 0)
+      break;			/* found a valid marker, exit loop */
+    /* Reach here if we found a stuffed-zero data sequence (FF/00).
+     * Discard it and loop back to try again.
+     */
+    cinfo->marker->discarded_bytes += 2;
+    INPUT_SYNC(cinfo);
+  }
+
+  if (cinfo->marker->discarded_bytes != 0) {
+    WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c);
+    cinfo->marker->discarded_bytes = 0;
+  }
+
+  cinfo->unread_marker = c;
+
+  INPUT_SYNC(cinfo);
+  return TRUE;
+}
+
+
+LOCAL(boolean)
+first_marker (j_decompress_ptr cinfo)
+/* Like next_marker, but used to obtain the initial SOI marker. */
+/* For this marker, we do not allow preceding garbage or fill; otherwise,
+ * we might well scan an entire input file before realizing it ain't JPEG.
+ * If an application wants to process non-JFIF files, it must seek to the
+ * SOI before calling the JPEG library.
+ */
+{
+  int c, c2;
+  INPUT_VARS(cinfo);
+
+  INPUT_BYTE(cinfo, c, return FALSE);
+  INPUT_BYTE(cinfo, c2, return FALSE);
+  if (c != 0xFF || c2 != (int) M_SOI)
+    ERREXIT2(cinfo, JERR_NO_SOI, c, c2);
+
+  cinfo->unread_marker = c2;
+
+  INPUT_SYNC(cinfo);
+  return TRUE;
+}
+
+
+/*
+ * Read markers until SOS or EOI.
+ *
+ * Returns same codes as are defined for jpeg_consume_input:
+ * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
+ *
+ * Note: This function may return a pseudo SOS marker (with zero
+ * component number) for treat by input controller's consume_input.
+ * consume_input itself should filter out (skip) the pseudo marker
+ * after processing for the caller.
+ */
+
+METHODDEF(int)
+read_markers (j_decompress_ptr cinfo)
+{
+  /* Outer loop repeats once for each marker. */
+  for (;;) {
+    /* Collect the marker proper, unless we already did. */
+    /* NB: first_marker() enforces the requirement that SOI appear first. */
+    if (cinfo->unread_marker == 0) {
+      if (! cinfo->marker->saw_SOI) {
+	if (! first_marker(cinfo))
+	  return JPEG_SUSPENDED;
+      } else {
+	if (! next_marker(cinfo))
+	  return JPEG_SUSPENDED;
+      }
+    }
+    /* At this point cinfo->unread_marker contains the marker code and the
+     * input point is just past the marker proper, but before any parameters.
+     * A suspension will cause us to return with this state still true.
+     */
+    switch (cinfo->unread_marker) {
+    case M_SOI:
+      if (! get_soi(cinfo))
+	return JPEG_SUSPENDED;
+      break;
+
+    case M_SOF0:		/* Baseline */
+      if (! get_sof(cinfo, TRUE, FALSE, FALSE))
+	return JPEG_SUSPENDED;
+      break;
+
+    case M_SOF1:		/* Extended sequential, Huffman */
+      if (! get_sof(cinfo, FALSE, FALSE, FALSE))
+	return JPEG_SUSPENDED;
+      break;
+
+    case M_SOF2:		/* Progressive, Huffman */
+      if (! get_sof(cinfo, FALSE, TRUE, FALSE))
+	return JPEG_SUSPENDED;
+      break;
+
+    case M_SOF9:		/* Extended sequential, arithmetic */
+      if (! get_sof(cinfo, FALSE, FALSE, TRUE))
+	return JPEG_SUSPENDED;
+      break;
+
+    case M_SOF10:		/* Progressive, arithmetic */
+      if (! get_sof(cinfo, FALSE, TRUE, TRUE))
+	return JPEG_SUSPENDED;
+      break;
+
+    /* Currently unsupported SOFn types */
+    case M_SOF3:		/* Lossless, Huffman */
+    case M_SOF5:		/* Differential sequential, Huffman */
+    case M_SOF6:		/* Differential progressive, Huffman */
+    case M_SOF7:		/* Differential lossless, Huffman */
+    case M_JPG:			/* Reserved for JPEG extensions */
+    case M_SOF11:		/* Lossless, arithmetic */
+    case M_SOF13:		/* Differential sequential, arithmetic */
+    case M_SOF14:		/* Differential progressive, arithmetic */
+    case M_SOF15:		/* Differential lossless, arithmetic */
+      ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker);
+      break;
+
+    case M_SOS:
+      if (! get_sos(cinfo))
+	return JPEG_SUSPENDED;
+      cinfo->unread_marker = 0;	/* processed the marker */
+      return JPEG_REACHED_SOS;
+    
+    case M_EOI:
+      TRACEMS(cinfo, 1, JTRC_EOI);
+      cinfo->unread_marker = 0;	/* processed the marker */
+      return JPEG_REACHED_EOI;
+      
+    case M_DAC:
+      if (! get_dac(cinfo))
+	return JPEG_SUSPENDED;
+      break;
+      
+    case M_DHT:
+      if (! get_dht(cinfo))
+	return JPEG_SUSPENDED;
+      break;
+      
+    case M_DQT:
+      if (! get_dqt(cinfo))
+	return JPEG_SUSPENDED;
+      break;
+      
+    case M_DRI:
+      if (! get_dri(cinfo))
+	return JPEG_SUSPENDED;
+      break;
+      
+    case M_APP0:
+    case M_APP1:
+    case M_APP2:
+    case M_APP3:
+    case M_APP4:
+    case M_APP5:
+    case M_APP6:
+    case M_APP7:
+    case M_APP8:
+    case M_APP9:
+    case M_APP10:
+    case M_APP11:
+    case M_APP12:
+    case M_APP13:
+    case M_APP14:
+    case M_APP15:
+      if (! (*((my_marker_ptr) cinfo->marker)->process_APPn[
+		cinfo->unread_marker - (int) M_APP0]) (cinfo))
+	return JPEG_SUSPENDED;
+      break;
+      
+    case M_COM:
+      if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo))
+	return JPEG_SUSPENDED;
+      break;
+
+    case M_RST0:		/* these are all parameterless */
+    case M_RST1:
+    case M_RST2:
+    case M_RST3:
+    case M_RST4:
+    case M_RST5:
+    case M_RST6:
+    case M_RST7:
+    case M_TEM:
+      TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker);
+      break;
+
+    case M_DNL:			/* Ignore DNL ... perhaps the wrong thing */
+      if (! skip_variable(cinfo))
+	return JPEG_SUSPENDED;
+      break;
+
+    default:			/* must be DHP, EXP, JPGn, or RESn */
+      /* For now, we treat the reserved markers as fatal errors since they are
+       * likely to be used to signal incompatible JPEG Part 3 extensions.
+       * Once the JPEG 3 version-number marker is well defined, this code
+       * ought to change!
+       */
+      ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker);
+      break;
+    }
+    /* Successfully processed marker, so reset state variable */
+    cinfo->unread_marker = 0;
+  } /* end loop */
+}
+
+
+/*
+ * Read a restart marker, which is expected to appear next in the datastream;
+ * if the marker is not there, take appropriate recovery action.
+ * Returns FALSE if suspension is required.
+ *
+ * This is called by the entropy decoder after it has read an appropriate
+ * number of MCUs.  cinfo->unread_marker may be nonzero if the entropy decoder
+ * has already read a marker from the data source.  Under normal conditions
+ * cinfo->unread_marker will be reset to 0 before returning; if not reset,
+ * it holds a marker which the decoder will be unable to read past.
+ */
+
+METHODDEF(boolean)
+read_restart_marker (j_decompress_ptr cinfo)
+{
+  /* Obtain a marker unless we already did. */
+  /* Note that next_marker will complain if it skips any data. */
+  if (cinfo->unread_marker == 0) {
+    if (! next_marker(cinfo))
+      return FALSE;
+  }
+
+  if (cinfo->unread_marker ==
+      ((int) M_RST0 + cinfo->marker->next_restart_num)) {
+    /* Normal case --- swallow the marker and let entropy decoder continue */
+    TRACEMS1(cinfo, 3, JTRC_RST, cinfo->marker->next_restart_num);
+    cinfo->unread_marker = 0;
+  } else {
+    /* Uh-oh, the restart markers have been messed up. */
+    /* Let the data source manager determine how to resync. */
+    if (! (*cinfo->src->resync_to_restart) (cinfo,
+					    cinfo->marker->next_restart_num))
+      return FALSE;
+  }
+
+  /* Update next-restart state */
+  cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7;
+
+  return TRUE;
+}
+
+
+/*
+ * This is the default resync_to_restart method for data source managers
+ * to use if they don't have any better approach.  Some data source managers
+ * may be able to back up, or may have additional knowledge about the data
+ * which permits a more intelligent recovery strategy; such managers would
+ * presumably supply their own resync method.
+ *
+ * read_restart_marker calls resync_to_restart if it finds a marker other than
+ * the restart marker it was expecting.  (This code is *not* used unless
+ * a nonzero restart interval has been declared.)  cinfo->unread_marker is
+ * the marker code actually found (might be anything, except 0 or FF).
+ * The desired restart marker number (0..7) is passed as a parameter.
+ * This routine is supposed to apply whatever error recovery strategy seems
+ * appropriate in order to position the input stream to the next data segment.
+ * Note that cinfo->unread_marker is treated as a marker appearing before
+ * the current data-source input point; usually it should be reset to zero
+ * before returning.
+ * Returns FALSE if suspension is required.
+ *
+ * This implementation is substantially constrained by wanting to treat the
+ * input as a data stream; this means we can't back up.  Therefore, we have
+ * only the following actions to work with:
+ *   1. Simply discard the marker and let the entropy decoder resume at next
+ *      byte of file.
+ *   2. Read forward until we find another marker, discarding intervening
+ *      data.  (In theory we could look ahead within the current bufferload,
+ *      without having to discard data if we don't find the desired marker.
+ *      This idea is not implemented here, in part because it makes behavior
+ *      dependent on buffer size and chance buffer-boundary positions.)
+ *   3. Leave the marker unread (by failing to zero cinfo->unread_marker).
+ *      This will cause the entropy decoder to process an empty data segment,
+ *      inserting dummy zeroes, and then we will reprocess the marker.
+ *
+ * #2 is appropriate if we think the desired marker lies ahead, while #3 is
+ * appropriate if the found marker is a future restart marker (indicating
+ * that we have missed the desired restart marker, probably because it got
+ * corrupted).
+ * We apply #2 or #3 if the found marker is a restart marker no more than
+ * two counts behind or ahead of the expected one.  We also apply #2 if the
+ * found marker is not a legal JPEG marker code (it's certainly bogus data).
+ * If the found marker is a restart marker more than 2 counts away, we do #1
+ * (too much risk that the marker is erroneous; with luck we will be able to
+ * resync at some future point).
+ * For any valid non-restart JPEG marker, we apply #3.  This keeps us from
+ * overrunning the end of a scan.  An implementation limited to single-scan
+ * files might find it better to apply #2 for markers other than EOI, since
+ * any other marker would have to be bogus data in that case.
+ */
+
+GLOBAL(boolean)
+jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired)
+{
+  int marker = cinfo->unread_marker;
+  int action = 1;
+  
+  /* Always put up a warning. */
+  WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired);
+  
+  /* Outer loop handles repeated decision after scanning forward. */
+  for (;;) {
+    if (marker < (int) M_SOF0)
+      action = 2;		/* invalid marker */
+    else if (marker < (int) M_RST0 || marker > (int) M_RST7)
+      action = 3;		/* valid non-restart marker */
+    else {
+      if (marker == ((int) M_RST0 + ((desired+1) & 7)) ||
+	  marker == ((int) M_RST0 + ((desired+2) & 7)))
+	action = 3;		/* one of the next two expected restarts */
+      else if (marker == ((int) M_RST0 + ((desired-1) & 7)) ||
+	       marker == ((int) M_RST0 + ((desired-2) & 7)))
+	action = 2;		/* a prior restart, so advance */
+      else
+	action = 1;		/* desired restart or too far away */
+    }
+    TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action);
+    switch (action) {
+    case 1:
+      /* Discard marker and let entropy decoder resume processing. */
+      cinfo->unread_marker = 0;
+      return TRUE;
+    case 2:
+      /* Scan to the next marker, and repeat the decision loop. */
+      if (! next_marker(cinfo))
+	return FALSE;
+      marker = cinfo->unread_marker;
+      break;
+    case 3:
+      /* Return without advancing past this marker. */
+      /* Entropy decoder will be forced to process an empty segment. */
+      return TRUE;
+    }
+  } /* end loop */
+}
+
+
+/*
+ * Reset marker processing state to begin a fresh datastream.
+ */
+
+METHODDEF(void)
+reset_marker_reader (j_decompress_ptr cinfo)
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+
+  cinfo->comp_info = NULL;		/* until allocated by get_sof */
+  cinfo->input_scan_number = 0;		/* no SOS seen yet */
+  cinfo->unread_marker = 0;		/* no pending marker */
+  marker->pub.saw_SOI = FALSE;		/* set internal state too */
+  marker->pub.saw_SOF = FALSE;
+  marker->pub.discarded_bytes = 0;
+  marker->cur_marker = NULL;
+}
+
+
+/*
+ * Initialize the marker reader module.
+ * This is called only once, when the decompression object is created.
+ */
+
+GLOBAL(void)
+jinit_marker_reader (j_decompress_ptr cinfo)
+{
+  my_marker_ptr marker;
+  int i;
+
+  /* Create subobject in permanent pool */
+  marker = (my_marker_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				SIZEOF(my_marker_reader));
+  cinfo->marker = (struct jpeg_marker_reader *) marker;
+  /* Initialize public method pointers */
+  marker->pub.reset_marker_reader = reset_marker_reader;
+  marker->pub.read_markers = read_markers;
+  marker->pub.read_restart_marker = read_restart_marker;
+  /* Initialize COM/APPn processing.
+   * By default, we examine and then discard APP0 and APP14,
+   * but simply discard COM and all other APPn.
+   */
+  marker->process_COM = skip_variable;
+  marker->length_limit_COM = 0;
+  for (i = 0; i < 16; i++) {
+    marker->process_APPn[i] = skip_variable;
+    marker->length_limit_APPn[i] = 0;
+  }
+  marker->process_APPn[0] = get_interesting_appn;
+  marker->process_APPn[14] = get_interesting_appn;
+  /* Reset marker processing state */
+  reset_marker_reader(cinfo);
+}
+
+
+/*
+ * Control saving of COM and APPn markers into marker_list.
+ */
+
+#ifdef SAVE_MARKERS_SUPPORTED
+
+GLOBAL(void)
+jpeg_save_markers (j_decompress_ptr cinfo, int marker_code,
+		   unsigned int length_limit)
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+  long maxlength;
+  jpeg_marker_parser_method processor;
+
+  /* Length limit mustn't be larger than what we can allocate
+   * (should only be a concern in a 16-bit environment).
+   */
+  maxlength = cinfo->mem->max_alloc_chunk - SIZEOF(struct jpeg_marker_struct);
+  if (((long) length_limit) > maxlength)
+    length_limit = (unsigned int) maxlength;
+
+  /* Choose processor routine to use.
+   * APP0/APP14 have special requirements.
+   */
+  if (length_limit) {
+    processor = save_marker;
+    /* If saving APP0/APP14, save at least enough for our internal use. */
+    if (marker_code == (int) M_APP0 && length_limit < APP0_DATA_LEN)
+      length_limit = APP0_DATA_LEN;
+    else if (marker_code == (int) M_APP14 && length_limit < APP14_DATA_LEN)
+      length_limit = APP14_DATA_LEN;
+  } else {
+    processor = skip_variable;
+    /* If discarding APP0/APP14, use our regular on-the-fly processor. */
+    if (marker_code == (int) M_APP0 || marker_code == (int) M_APP14)
+      processor = get_interesting_appn;
+  }
+
+  if (marker_code == (int) M_COM) {
+    marker->process_COM = processor;
+    marker->length_limit_COM = length_limit;
+  } else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) {
+    marker->process_APPn[marker_code - (int) M_APP0] = processor;
+    marker->length_limit_APPn[marker_code - (int) M_APP0] = length_limit;
+  } else
+    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
+}
+
+#endif /* SAVE_MARKERS_SUPPORTED */
+
+
+/*
+ * Install a special processing method for COM or APPn markers.
+ */
+
+GLOBAL(void)
+jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code,
+			   jpeg_marker_parser_method routine)
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+
+  if (marker_code == (int) M_COM)
+    marker->process_COM = routine;
+  else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15)
+    marker->process_APPn[marker_code - (int) M_APP0] = routine;
+  else
+    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
+}
diff --git a/jpeg-8d/jdmaster.c b/jpeg-8d/jdmaster.c
new file mode 100644
index 0000000..fef72a2
--- /dev/null
+++ b/jpeg-8d/jdmaster.c
@@ -0,0 +1,531 @@
+/*
+ * jdmaster.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2002-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains master control logic for the JPEG decompressor.
+ * These routines are concerned with selecting the modules to be executed
+ * and with determining the number of passes and the work to be done in each
+ * pass.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Private state */
+
+typedef struct {
+  struct jpeg_decomp_master pub; /* public fields */
+
+  int pass_number;		/* # of passes completed */
+
+  boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */
+
+  /* Saved references to initialized quantizer modules,
+   * in case we need to switch modes.
+   */
+  struct jpeg_color_quantizer * quantizer_1pass;
+  struct jpeg_color_quantizer * quantizer_2pass;
+} my_decomp_master;
+
+typedef my_decomp_master * my_master_ptr;
+
+
+/*
+ * Determine whether merged upsample/color conversion should be used.
+ * CRUCIAL: this must match the actual capabilities of jdmerge.c!
+ */
+
+LOCAL(boolean)
+use_merged_upsample (j_decompress_ptr cinfo)
+{
+#ifdef UPSAMPLE_MERGING_SUPPORTED
+  /* Merging is the equivalent of plain box-filter upsampling */
+  if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling)
+    return FALSE;
+  /* jdmerge.c only supports YCC=>RGB color conversion */
+  if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 ||
+      cinfo->out_color_space != JCS_RGB ||
+      cinfo->out_color_components != RGB_PIXELSIZE)
+    return FALSE;
+  /* and it only handles 2h1v or 2h2v sampling ratios */
+  if (cinfo->comp_info[0].h_samp_factor != 2 ||
+      cinfo->comp_info[1].h_samp_factor != 1 ||
+      cinfo->comp_info[2].h_samp_factor != 1 ||
+      cinfo->comp_info[0].v_samp_factor >  2 ||
+      cinfo->comp_info[1].v_samp_factor != 1 ||
+      cinfo->comp_info[2].v_samp_factor != 1)
+    return FALSE;
+  /* furthermore, it doesn't work if we've scaled the IDCTs differently */
+  if (cinfo->comp_info[0].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size ||
+      cinfo->comp_info[1].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size ||
+      cinfo->comp_info[2].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size ||
+      cinfo->comp_info[0].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size ||
+      cinfo->comp_info[1].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size ||
+      cinfo->comp_info[2].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size)
+    return FALSE;
+  /* ??? also need to test for upsample-time rescaling, when & if supported */
+  return TRUE;			/* by golly, it'll work... */
+#else
+  return FALSE;
+#endif
+}
+
+
+/*
+ * Compute output image dimensions and related values.
+ * NOTE: this is exported for possible use by application.
+ * Hence it mustn't do anything that can't be done twice.
+ * Also note that it may be called before the master module is initialized!
+ */
+
+GLOBAL(void)
+jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
+/* Do computations that are needed before master selection phase.
+ * This function is used for full decompression.
+ */
+{
+#ifdef IDCT_SCALING_SUPPORTED
+  int ci;
+  jpeg_component_info *compptr;
+#endif
+
+  /* Prevent application from calling me at wrong times */
+  if (cinfo->global_state != DSTATE_READY)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  /* Compute core output image dimensions and DCT scaling choices. */
+  jpeg_core_output_dimensions(cinfo);
+
+#ifdef IDCT_SCALING_SUPPORTED
+
+  /* In selecting the actual DCT scaling for each component, we try to
+   * scale up the chroma components via IDCT scaling rather than upsampling.
+   * This saves time if the upsampler gets to use 1:1 scaling.
+   * Note this code adapts subsampling ratios which are powers of 2.
+   */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    int ssize = 1;
+    while (cinfo->min_DCT_h_scaled_size * ssize <=
+	   (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) &&
+	   (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) {
+      ssize = ssize * 2;
+    }
+    compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize;
+    ssize = 1;
+    while (cinfo->min_DCT_v_scaled_size * ssize <=
+	   (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) &&
+	   (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) {
+      ssize = ssize * 2;
+    }
+    compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize;
+
+    /* We don't support IDCT ratios larger than 2. */
+    if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2)
+	compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2;
+    else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2)
+	compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2;
+  }
+
+  /* Recompute downsampled dimensions of components;
+   * application needs to know these if using raw downsampled data.
+   */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Size in samples, after IDCT scaling */
+    compptr->downsampled_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width *
+		    (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size),
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
+    compptr->downsampled_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height *
+		    (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size),
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+  }
+
+#endif /* IDCT_SCALING_SUPPORTED */
+
+  /* Report number of components in selected colorspace. */
+  /* Probably this should be in the color conversion module... */
+  switch (cinfo->out_color_space) {
+  case JCS_GRAYSCALE:
+    cinfo->out_color_components = 1;
+    break;
+  case JCS_RGB:
+    cinfo->out_color_components = RGB_PIXELSIZE;
+    break;
+  case JCS_YCbCr:
+    cinfo->out_color_components = 3;
+    break;
+  case JCS_CMYK:
+  case JCS_YCCK:
+    cinfo->out_color_components = 4;
+    break;
+  default:			/* else must be same colorspace as in file */
+    cinfo->out_color_components = cinfo->num_components;
+    break;
+  }
+  cinfo->output_components = (cinfo->quantize_colors ? 1 :
+			      cinfo->out_color_components);
+
+  /* See if upsampler will want to emit more than one row at a time */
+  if (use_merged_upsample(cinfo))
+    cinfo->rec_outbuf_height = cinfo->max_v_samp_factor;
+  else
+    cinfo->rec_outbuf_height = 1;
+}
+
+
+/*
+ * Several decompression processes need to range-limit values to the range
+ * 0..MAXJSAMPLE; the input value may fall somewhat outside this range
+ * due to noise introduced by quantization, roundoff error, etc.  These
+ * processes are inner loops and need to be as fast as possible.  On most
+ * machines, particularly CPUs with pipelines or instruction prefetch,
+ * a (subscript-check-less) C table lookup
+ *		x = sample_range_limit[x];
+ * is faster than explicit tests
+ *		if (x < 0)  x = 0;
+ *		else if (x > MAXJSAMPLE)  x = MAXJSAMPLE;
+ * These processes all use a common table prepared by the routine below.
+ *
+ * For most steps we can mathematically guarantee that the initial value
+ * of x is within MAXJSAMPLE+1 of the legal range, so a table running from
+ * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient.  But for the initial
+ * limiting step (just after the IDCT), a wildly out-of-range value is 
+ * possible if the input data is corrupt.  To avoid any chance of indexing
+ * off the end of memory and getting a bad-pointer trap, we perform the
+ * post-IDCT limiting thus:
+ *		x = range_limit[x & MASK];
+ * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit
+ * samples.  Under normal circumstances this is more than enough range and
+ * a correct output will be generated; with bogus input data the mask will
+ * cause wraparound, and we will safely generate a bogus-but-in-range output.
+ * For the post-IDCT step, we want to convert the data from signed to unsigned
+ * representation by adding CENTERJSAMPLE at the same time that we limit it.
+ * So the post-IDCT limiting table ends up looking like this:
+ *   CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE,
+ *   MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
+ *   0          (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
+ *   0,1,...,CENTERJSAMPLE-1
+ * Negative inputs select values from the upper half of the table after
+ * masking.
+ *
+ * We can save some space by overlapping the start of the post-IDCT table
+ * with the simpler range limiting table.  The post-IDCT table begins at
+ * sample_range_limit + CENTERJSAMPLE.
+ *
+ * Note that the table is allocated in near data space on PCs; it's small
+ * enough and used often enough to justify this.
+ */
+
+LOCAL(void)
+prepare_range_limit_table (j_decompress_ptr cinfo)
+/* Allocate and fill in the sample_range_limit table */
+{
+  JSAMPLE * table;
+  int i;
+
+  table = (JSAMPLE *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+		(5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE));
+  table += (MAXJSAMPLE+1);	/* allow negative subscripts of simple table */
+  cinfo->sample_range_limit = table;
+  /* First segment of "simple" table: limit[x] = 0 for x < 0 */
+  MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE));
+  /* Main part of "simple" table: limit[x] = x */
+  for (i = 0; i <= MAXJSAMPLE; i++)
+    table[i] = (JSAMPLE) i;
+  table += CENTERJSAMPLE;	/* Point to where post-IDCT table starts */
+  /* End of simple table, rest of first half of post-IDCT table */
+  for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++)
+    table[i] = MAXJSAMPLE;
+  /* Second half of post-IDCT table */
+  MEMZERO(table + (2 * (MAXJSAMPLE+1)),
+	  (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE));
+  MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE),
+	  cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE));
+}
+
+
+/*
+ * Master selection of decompression modules.
+ * This is done once at jpeg_start_decompress time.  We determine
+ * which modules will be used and give them appropriate initialization calls.
+ * We also initialize the decompressor input side to begin consuming data.
+ *
+ * Since jpeg_read_header has finished, we know what is in the SOF
+ * and (first) SOS markers.  We also have all the application parameter
+ * settings.
+ */
+
+LOCAL(void)
+master_selection (j_decompress_ptr cinfo)
+{
+  my_master_ptr master = (my_master_ptr) cinfo->master;
+  boolean use_c_buffer;
+  long samplesperrow;
+  JDIMENSION jd_samplesperrow;
+
+  /* Initialize dimensions and other stuff */
+  jpeg_calc_output_dimensions(cinfo);
+  prepare_range_limit_table(cinfo);
+
+  /* Width of an output scanline must be representable as JDIMENSION. */
+  samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components;
+  jd_samplesperrow = (JDIMENSION) samplesperrow;
+  if ((long) jd_samplesperrow != samplesperrow)
+    ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
+
+  /* Initialize my private state */
+  master->pass_number = 0;
+  master->using_merged_upsample = use_merged_upsample(cinfo);
+
+  /* Color quantizer selection */
+  master->quantizer_1pass = NULL;
+  master->quantizer_2pass = NULL;
+  /* No mode changes if not using buffered-image mode. */
+  if (! cinfo->quantize_colors || ! cinfo->buffered_image) {
+    cinfo->enable_1pass_quant = FALSE;
+    cinfo->enable_external_quant = FALSE;
+    cinfo->enable_2pass_quant = FALSE;
+  }
+  if (cinfo->quantize_colors) {
+    if (cinfo->raw_data_out)
+      ERREXIT(cinfo, JERR_NOTIMPL);
+    /* 2-pass quantizer only works in 3-component color space. */
+    if (cinfo->out_color_components != 3) {
+      cinfo->enable_1pass_quant = TRUE;
+      cinfo->enable_external_quant = FALSE;
+      cinfo->enable_2pass_quant = FALSE;
+      cinfo->colormap = NULL;
+    } else if (cinfo->colormap != NULL) {
+      cinfo->enable_external_quant = TRUE;
+    } else if (cinfo->two_pass_quantize) {
+      cinfo->enable_2pass_quant = TRUE;
+    } else {
+      cinfo->enable_1pass_quant = TRUE;
+    }
+
+    if (cinfo->enable_1pass_quant) {
+#ifdef QUANT_1PASS_SUPPORTED
+      jinit_1pass_quantizer(cinfo);
+      master->quantizer_1pass = cinfo->cquantize;
+#else
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+    }
+
+    /* We use the 2-pass code to map to external colormaps. */
+    if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) {
+#ifdef QUANT_2PASS_SUPPORTED
+      jinit_2pass_quantizer(cinfo);
+      master->quantizer_2pass = cinfo->cquantize;
+#else
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+    }
+    /* If both quantizers are initialized, the 2-pass one is left active;
+     * this is necessary for starting with quantization to an external map.
+     */
+  }
+
+  /* Post-processing: in particular, color conversion first */
+  if (! cinfo->raw_data_out) {
+    if (master->using_merged_upsample) {
+#ifdef UPSAMPLE_MERGING_SUPPORTED
+      jinit_merged_upsampler(cinfo); /* does color conversion too */
+#else
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+    } else {
+      jinit_color_deconverter(cinfo);
+      jinit_upsampler(cinfo);
+    }
+    jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant);
+  }
+  /* Inverse DCT */
+  jinit_inverse_dct(cinfo);
+  /* Entropy decoding: either Huffman or arithmetic coding. */
+  if (cinfo->arith_code)
+    jinit_arith_decoder(cinfo);
+  else {
+    jinit_huff_decoder(cinfo);
+  }
+
+  /* Initialize principal buffer controllers. */
+  use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image;
+  jinit_d_coef_controller(cinfo, use_c_buffer);
+
+  if (! cinfo->raw_data_out)
+    jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */);
+
+  /* We can now tell the memory manager to allocate virtual arrays. */
+  (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
+
+  /* Initialize input side of decompressor to consume first scan. */
+  (*cinfo->inputctl->start_input_pass) (cinfo);
+
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+  /* If jpeg_start_decompress will read the whole file, initialize
+   * progress monitoring appropriately.  The input step is counted
+   * as one pass.
+   */
+  if (cinfo->progress != NULL && ! cinfo->buffered_image &&
+      cinfo->inputctl->has_multiple_scans) {
+    int nscans;
+    /* Estimate number of scans to set pass_limit. */
+    if (cinfo->progressive_mode) {
+      /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */
+      nscans = 2 + 3 * cinfo->num_components;
+    } else {
+      /* For a nonprogressive multiscan file, estimate 1 scan per component. */
+      nscans = cinfo->num_components;
+    }
+    cinfo->progress->pass_counter = 0L;
+    cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans;
+    cinfo->progress->completed_passes = 0;
+    cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2);
+    /* Count the input pass as done */
+    master->pass_number++;
+  }
+#endif /* D_MULTISCAN_FILES_SUPPORTED */
+}
+
+
+/*
+ * Per-pass setup.
+ * This is called at the beginning of each output pass.  We determine which
+ * modules will be active during this pass and give them appropriate
+ * start_pass calls.  We also set is_dummy_pass to indicate whether this
+ * is a "real" output pass or a dummy pass for color quantization.
+ * (In the latter case, jdapistd.c will crank the pass to completion.)
+ */
+
+METHODDEF(void)
+prepare_for_output_pass (j_decompress_ptr cinfo)
+{
+  my_master_ptr master = (my_master_ptr) cinfo->master;
+
+  if (master->pub.is_dummy_pass) {
+#ifdef QUANT_2PASS_SUPPORTED
+    /* Final pass of 2-pass quantization */
+    master->pub.is_dummy_pass = FALSE;
+    (*cinfo->cquantize->start_pass) (cinfo, FALSE);
+    (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST);
+    (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST);
+#else
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif /* QUANT_2PASS_SUPPORTED */
+  } else {
+    if (cinfo->quantize_colors && cinfo->colormap == NULL) {
+      /* Select new quantization method */
+      if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) {
+	cinfo->cquantize = master->quantizer_2pass;
+	master->pub.is_dummy_pass = TRUE;
+      } else if (cinfo->enable_1pass_quant) {
+	cinfo->cquantize = master->quantizer_1pass;
+      } else {
+	ERREXIT(cinfo, JERR_MODE_CHANGE);
+      }
+    }
+    (*cinfo->idct->start_pass) (cinfo);
+    (*cinfo->coef->start_output_pass) (cinfo);
+    if (! cinfo->raw_data_out) {
+      if (! master->using_merged_upsample)
+	(*cinfo->cconvert->start_pass) (cinfo);
+      (*cinfo->upsample->start_pass) (cinfo);
+      if (cinfo->quantize_colors)
+	(*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass);
+      (*cinfo->post->start_pass) (cinfo,
+	    (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU));
+      (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU);
+    }
+  }
+
+  /* Set up progress monitor's pass info if present */
+  if (cinfo->progress != NULL) {
+    cinfo->progress->completed_passes = master->pass_number;
+    cinfo->progress->total_passes = master->pass_number +
+				    (master->pub.is_dummy_pass ? 2 : 1);
+    /* In buffered-image mode, we assume one more output pass if EOI not
+     * yet reached, but no more passes if EOI has been reached.
+     */
+    if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) {
+      cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1);
+    }
+  }
+}
+
+
+/*
+ * Finish up at end of an output pass.
+ */
+
+METHODDEF(void)
+finish_output_pass (j_decompress_ptr cinfo)
+{
+  my_master_ptr master = (my_master_ptr) cinfo->master;
+
+  if (cinfo->quantize_colors)
+    (*cinfo->cquantize->finish_pass) (cinfo);
+  master->pass_number++;
+}
+
+
+#ifdef D_MULTISCAN_FILES_SUPPORTED
+
+/*
+ * Switch to a new external colormap between output passes.
+ */
+
+GLOBAL(void)
+jpeg_new_colormap (j_decompress_ptr cinfo)
+{
+  my_master_ptr master = (my_master_ptr) cinfo->master;
+
+  /* Prevent application from calling me at wrong times */
+  if (cinfo->global_state != DSTATE_BUFIMAGE)
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  if (cinfo->quantize_colors && cinfo->enable_external_quant &&
+      cinfo->colormap != NULL) {
+    /* Select 2-pass quantizer for external colormap use */
+    cinfo->cquantize = master->quantizer_2pass;
+    /* Notify quantizer of colormap change */
+    (*cinfo->cquantize->new_color_map) (cinfo);
+    master->pub.is_dummy_pass = FALSE; /* just in case */
+  } else
+    ERREXIT(cinfo, JERR_MODE_CHANGE);
+}
+
+#endif /* D_MULTISCAN_FILES_SUPPORTED */
+
+
+/*
+ * Initialize master decompression control and select active modules.
+ * This is performed at the start of jpeg_start_decompress.
+ */
+
+GLOBAL(void)
+jinit_master_decompress (j_decompress_ptr cinfo)
+{
+  my_master_ptr master;
+
+  master = (my_master_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(my_decomp_master));
+  cinfo->master = (struct jpeg_decomp_master *) master;
+  master->pub.prepare_for_output_pass = prepare_for_output_pass;
+  master->pub.finish_output_pass = finish_output_pass;
+
+  master->pub.is_dummy_pass = FALSE;
+
+  master_selection(cinfo);
+}
diff --git a/jpeg-8d/jdmerge.c b/jpeg-8d/jdmerge.c
new file mode 100644
index 0000000..3744446
--- /dev/null
+++ b/jpeg-8d/jdmerge.c
@@ -0,0 +1,400 @@
+/*
+ * jdmerge.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains code for merged upsampling/color conversion.
+ *
+ * This file combines functions from jdsample.c and jdcolor.c;
+ * read those files first to understand what's going on.
+ *
+ * When the chroma components are to be upsampled by simple replication
+ * (ie, box filtering), we can save some work in color conversion by
+ * calculating all the output pixels corresponding to a pair of chroma
+ * samples at one time.  In the conversion equations
+ *	R = Y           + K1 * Cr
+ *	G = Y + K2 * Cb + K3 * Cr
+ *	B = Y + K4 * Cb
+ * only the Y term varies among the group of pixels corresponding to a pair
+ * of chroma samples, so the rest of the terms can be calculated just once.
+ * At typical sampling ratios, this eliminates half or three-quarters of the
+ * multiplications needed for color conversion.
+ *
+ * This file currently provides implementations for the following cases:
+ *	YCbCr => RGB color conversion only.
+ *	Sampling ratios of 2h1v or 2h2v.
+ *	No scaling needed at upsample time.
+ *	Corner-aligned (non-CCIR601) sampling alignment.
+ * Other special cases could be added, but in most applications these are
+ * the only common cases.  (For uncommon cases we fall back on the more
+ * general code in jdsample.c and jdcolor.c.)
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+#ifdef UPSAMPLE_MERGING_SUPPORTED
+
+
+/* Private subobject */
+
+typedef struct {
+  struct jpeg_upsampler pub;	/* public fields */
+
+  /* Pointer to routine to do actual upsampling/conversion of one row group */
+  JMETHOD(void, upmethod, (j_decompress_ptr cinfo,
+			   JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
+			   JSAMPARRAY output_buf));
+
+  /* Private state for YCC->RGB conversion */
+  int * Cr_r_tab;		/* => table for Cr to R conversion */
+  int * Cb_b_tab;		/* => table for Cb to B conversion */
+  INT32 * Cr_g_tab;		/* => table for Cr to G conversion */
+  INT32 * Cb_g_tab;		/* => table for Cb to G conversion */
+
+  /* For 2:1 vertical sampling, we produce two output rows at a time.
+   * We need a "spare" row buffer to hold the second output row if the
+   * application provides just a one-row buffer; we also use the spare
+   * to discard the dummy last row if the image height is odd.
+   */
+  JSAMPROW spare_row;
+  boolean spare_full;		/* T if spare buffer is occupied */
+
+  JDIMENSION out_row_width;	/* samples per output row */
+  JDIMENSION rows_to_go;	/* counts rows remaining in image */
+} my_upsampler;
+
+typedef my_upsampler * my_upsample_ptr;
+
+#define SCALEBITS	16	/* speediest right-shift on some machines */
+#define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
+#define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
+
+
+/*
+ * Initialize tables for YCC->RGB colorspace conversion.
+ * This is taken directly from jdcolor.c; see that file for more info.
+ */
+
+LOCAL(void)
+build_ycc_rgb_table (j_decompress_ptr cinfo)
+{
+  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
+  int i;
+  INT32 x;
+  SHIFT_TEMPS
+
+  upsample->Cr_r_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  upsample->Cb_b_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  upsample->Cr_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+  upsample->Cb_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+
+  for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
+    /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
+    /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
+    /* Cr=>R value is nearest int to 1.40200 * x */
+    upsample->Cr_r_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
+    /* Cb=>B value is nearest int to 1.77200 * x */
+    upsample->Cb_b_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
+    /* Cr=>G value is scaled-up -0.71414 * x */
+    upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x;
+    /* Cb=>G value is scaled-up -0.34414 * x */
+    /* We also add in ONE_HALF so that need not do it in inner loop */
+    upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
+  }
+}
+
+
+/*
+ * Initialize for an upsampling pass.
+ */
+
+METHODDEF(void)
+start_pass_merged_upsample (j_decompress_ptr cinfo)
+{
+  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
+
+  /* Mark the spare buffer empty */
+  upsample->spare_full = FALSE;
+  /* Initialize total-height counter for detecting bottom of image */
+  upsample->rows_to_go = cinfo->output_height;
+}
+
+
+/*
+ * Control routine to do upsampling (and color conversion).
+ *
+ * The control routine just handles the row buffering considerations.
+ */
+
+METHODDEF(void)
+merged_2v_upsample (j_decompress_ptr cinfo,
+		    JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
+		    JDIMENSION in_row_groups_avail,
+		    JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+		    JDIMENSION out_rows_avail)
+/* 2:1 vertical sampling case: may need a spare row. */
+{
+  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
+  JSAMPROW work_ptrs[2];
+  JDIMENSION num_rows;		/* number of rows returned to caller */
+
+  if (upsample->spare_full) {
+    /* If we have a spare row saved from a previous cycle, just return it. */
+    jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0,
+		      1, upsample->out_row_width);
+    num_rows = 1;
+    upsample->spare_full = FALSE;
+  } else {
+    /* Figure number of rows to return to caller. */
+    num_rows = 2;
+    /* Not more than the distance to the end of the image. */
+    if (num_rows > upsample->rows_to_go)
+      num_rows = upsample->rows_to_go;
+    /* And not more than what the client can accept: */
+    out_rows_avail -= *out_row_ctr;
+    if (num_rows > out_rows_avail)
+      num_rows = out_rows_avail;
+    /* Create output pointer array for upsampler. */
+    work_ptrs[0] = output_buf[*out_row_ctr];
+    if (num_rows > 1) {
+      work_ptrs[1] = output_buf[*out_row_ctr + 1];
+    } else {
+      work_ptrs[1] = upsample->spare_row;
+      upsample->spare_full = TRUE;
+    }
+    /* Now do the upsampling. */
+    (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs);
+  }
+
+  /* Adjust counts */
+  *out_row_ctr += num_rows;
+  upsample->rows_to_go -= num_rows;
+  /* When the buffer is emptied, declare this input row group consumed */
+  if (! upsample->spare_full)
+    (*in_row_group_ctr)++;
+}
+
+
+METHODDEF(void)
+merged_1v_upsample (j_decompress_ptr cinfo,
+		    JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
+		    JDIMENSION in_row_groups_avail,
+		    JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+		    JDIMENSION out_rows_avail)
+/* 1:1 vertical sampling case: much easier, never need a spare row. */
+{
+  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
+
+  /* Just do the upsampling. */
+  (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr,
+			 output_buf + *out_row_ctr);
+  /* Adjust counts */
+  (*out_row_ctr)++;
+  (*in_row_group_ctr)++;
+}
+
+
+/*
+ * These are the routines invoked by the control routines to do
+ * the actual upsampling/conversion.  One row group is processed per call.
+ *
+ * Note: since we may be writing directly into application-supplied buffers,
+ * we have to be honest about the output width; we can't assume the buffer
+ * has been rounded up to an even width.
+ */
+
+
+/*
+ * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical.
+ */
+
+METHODDEF(void)
+h2v1_merged_upsample (j_decompress_ptr cinfo,
+		      JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
+		      JSAMPARRAY output_buf)
+{
+  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
+  register int y, cred, cgreen, cblue;
+  int cb, cr;
+  register JSAMPROW outptr;
+  JSAMPROW inptr0, inptr1, inptr2;
+  JDIMENSION col;
+  /* copy these pointers into registers if possible */
+  register JSAMPLE * range_limit = cinfo->sample_range_limit;
+  int * Crrtab = upsample->Cr_r_tab;
+  int * Cbbtab = upsample->Cb_b_tab;
+  INT32 * Crgtab = upsample->Cr_g_tab;
+  INT32 * Cbgtab = upsample->Cb_g_tab;
+  SHIFT_TEMPS
+
+  inptr0 = input_buf[0][in_row_group_ctr];
+  inptr1 = input_buf[1][in_row_group_ctr];
+  inptr2 = input_buf[2][in_row_group_ctr];
+  outptr = output_buf[0];
+  /* Loop for each pair of output pixels */
+  for (col = cinfo->output_width >> 1; col > 0; col--) {
+    /* Do the chroma part of the calculation */
+    cb = GETJSAMPLE(*inptr1++);
+    cr = GETJSAMPLE(*inptr2++);
+    cred = Crrtab[cr];
+    cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
+    cblue = Cbbtab[cb];
+    /* Fetch 2 Y values and emit 2 pixels */
+    y  = GETJSAMPLE(*inptr0++);
+    outptr[RGB_RED] =   range_limit[y + cred];
+    outptr[RGB_GREEN] = range_limit[y + cgreen];
+    outptr[RGB_BLUE] =  range_limit[y + cblue];
+    outptr += RGB_PIXELSIZE;
+    y  = GETJSAMPLE(*inptr0++);
+    outptr[RGB_RED] =   range_limit[y + cred];
+    outptr[RGB_GREEN] = range_limit[y + cgreen];
+    outptr[RGB_BLUE] =  range_limit[y + cblue];
+    outptr += RGB_PIXELSIZE;
+  }
+  /* If image width is odd, do the last output column separately */
+  if (cinfo->output_width & 1) {
+    cb = GETJSAMPLE(*inptr1);
+    cr = GETJSAMPLE(*inptr2);
+    cred = Crrtab[cr];
+    cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
+    cblue = Cbbtab[cb];
+    y  = GETJSAMPLE(*inptr0);
+    outptr[RGB_RED] =   range_limit[y + cred];
+    outptr[RGB_GREEN] = range_limit[y + cgreen];
+    outptr[RGB_BLUE] =  range_limit[y + cblue];
+  }
+}
+
+
+/*
+ * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical.
+ */
+
+METHODDEF(void)
+h2v2_merged_upsample (j_decompress_ptr cinfo,
+		      JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
+		      JSAMPARRAY output_buf)
+{
+  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
+  register int y, cred, cgreen, cblue;
+  int cb, cr;
+  register JSAMPROW outptr0, outptr1;
+  JSAMPROW inptr00, inptr01, inptr1, inptr2;
+  JDIMENSION col;
+  /* copy these pointers into registers if possible */
+  register JSAMPLE * range_limit = cinfo->sample_range_limit;
+  int * Crrtab = upsample->Cr_r_tab;
+  int * Cbbtab = upsample->Cb_b_tab;
+  INT32 * Crgtab = upsample->Cr_g_tab;
+  INT32 * Cbgtab = upsample->Cb_g_tab;
+  SHIFT_TEMPS
+
+  inptr00 = input_buf[0][in_row_group_ctr*2];
+  inptr01 = input_buf[0][in_row_group_ctr*2 + 1];
+  inptr1 = input_buf[1][in_row_group_ctr];
+  inptr2 = input_buf[2][in_row_group_ctr];
+  outptr0 = output_buf[0];
+  outptr1 = output_buf[1];
+  /* Loop for each group of output pixels */
+  for (col = cinfo->output_width >> 1; col > 0; col--) {
+    /* Do the chroma part of the calculation */
+    cb = GETJSAMPLE(*inptr1++);
+    cr = GETJSAMPLE(*inptr2++);
+    cred = Crrtab[cr];
+    cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
+    cblue = Cbbtab[cb];
+    /* Fetch 4 Y values and emit 4 pixels */
+    y  = GETJSAMPLE(*inptr00++);
+    outptr0[RGB_RED] =   range_limit[y + cred];
+    outptr0[RGB_GREEN] = range_limit[y + cgreen];
+    outptr0[RGB_BLUE] =  range_limit[y + cblue];
+    outptr0 += RGB_PIXELSIZE;
+    y  = GETJSAMPLE(*inptr00++);
+    outptr0[RGB_RED] =   range_limit[y + cred];
+    outptr0[RGB_GREEN] = range_limit[y + cgreen];
+    outptr0[RGB_BLUE] =  range_limit[y + cblue];
+    outptr0 += RGB_PIXELSIZE;
+    y  = GETJSAMPLE(*inptr01++);
+    outptr1[RGB_RED] =   range_limit[y + cred];
+    outptr1[RGB_GREEN] = range_limit[y + cgreen];
+    outptr1[RGB_BLUE] =  range_limit[y + cblue];
+    outptr1 += RGB_PIXELSIZE;
+    y  = GETJSAMPLE(*inptr01++);
+    outptr1[RGB_RED] =   range_limit[y + cred];
+    outptr1[RGB_GREEN] = range_limit[y + cgreen];
+    outptr1[RGB_BLUE] =  range_limit[y + cblue];
+    outptr1 += RGB_PIXELSIZE;
+  }
+  /* If image width is odd, do the last output column separately */
+  if (cinfo->output_width & 1) {
+    cb = GETJSAMPLE(*inptr1);
+    cr = GETJSAMPLE(*inptr2);
+    cred = Crrtab[cr];
+    cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
+    cblue = Cbbtab[cb];
+    y  = GETJSAMPLE(*inptr00);
+    outptr0[RGB_RED] =   range_limit[y + cred];
+    outptr0[RGB_GREEN] = range_limit[y + cgreen];
+    outptr0[RGB_BLUE] =  range_limit[y + cblue];
+    y  = GETJSAMPLE(*inptr01);
+    outptr1[RGB_RED] =   range_limit[y + cred];
+    outptr1[RGB_GREEN] = range_limit[y + cgreen];
+    outptr1[RGB_BLUE] =  range_limit[y + cblue];
+  }
+}
+
+
+/*
+ * Module initialization routine for merged upsampling/color conversion.
+ *
+ * NB: this is called under the conditions determined by use_merged_upsample()
+ * in jdmaster.c.  That routine MUST correspond to the actual capabilities
+ * of this module; no safety checks are made here.
+ */
+
+GLOBAL(void)
+jinit_merged_upsampler (j_decompress_ptr cinfo)
+{
+  my_upsample_ptr upsample;
+
+  upsample = (my_upsample_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_upsampler));
+  cinfo->upsample = (struct jpeg_upsampler *) upsample;
+  upsample->pub.start_pass = start_pass_merged_upsample;
+  upsample->pub.need_context_rows = FALSE;
+
+  upsample->out_row_width = cinfo->output_width * cinfo->out_color_components;
+
+  if (cinfo->max_v_samp_factor == 2) {
+    upsample->pub.upsample = merged_2v_upsample;
+    upsample->upmethod = h2v2_merged_upsample;
+    /* Allocate a spare row buffer */
+    upsample->spare_row = (JSAMPROW)
+      (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+		(size_t) (upsample->out_row_width * SIZEOF(JSAMPLE)));
+  } else {
+    upsample->pub.upsample = merged_1v_upsample;
+    upsample->upmethod = h2v1_merged_upsample;
+    /* No spare row needed */
+    upsample->spare_row = NULL;
+  }
+
+  build_ycc_rgb_table(cinfo);
+}
+
+#endif /* UPSAMPLE_MERGING_SUPPORTED */
diff --git a/jpeg-8d/jdpostct.c b/jpeg-8d/jdpostct.c
new file mode 100644
index 0000000..571563d
--- /dev/null
+++ b/jpeg-8d/jdpostct.c
@@ -0,0 +1,290 @@
+/*
+ * jdpostct.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the decompression postprocessing controller.
+ * This controller manages the upsampling, color conversion, and color
+ * quantization/reduction steps; specifically, it controls the buffering
+ * between upsample/color conversion and color quantization/reduction.
+ *
+ * If no color quantization/reduction is required, then this module has no
+ * work to do, and it just hands off to the upsample/color conversion code.
+ * An integrated upsample/convert/quantize process would replace this module
+ * entirely.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Private buffer controller object */
+
+typedef struct {
+  struct jpeg_d_post_controller pub; /* public fields */
+
+  /* Color quantization source buffer: this holds output data from
+   * the upsample/color conversion step to be passed to the quantizer.
+   * For two-pass color quantization, we need a full-image buffer;
+   * for one-pass operation, a strip buffer is sufficient.
+   */
+  jvirt_sarray_ptr whole_image;	/* virtual array, or NULL if one-pass */
+  JSAMPARRAY buffer;		/* strip buffer, or current strip of virtual */
+  JDIMENSION strip_height;	/* buffer size in rows */
+  /* for two-pass mode only: */
+  JDIMENSION starting_row;	/* row # of first row in current strip */
+  JDIMENSION next_row;		/* index of next row to fill/empty in strip */
+} my_post_controller;
+
+typedef my_post_controller * my_post_ptr;
+
+
+/* Forward declarations */
+METHODDEF(void) post_process_1pass
+	JPP((j_decompress_ptr cinfo,
+	     JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
+	     JDIMENSION in_row_groups_avail,
+	     JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+	     JDIMENSION out_rows_avail));
+#ifdef QUANT_2PASS_SUPPORTED
+METHODDEF(void) post_process_prepass
+	JPP((j_decompress_ptr cinfo,
+	     JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
+	     JDIMENSION in_row_groups_avail,
+	     JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+	     JDIMENSION out_rows_avail));
+METHODDEF(void) post_process_2pass
+	JPP((j_decompress_ptr cinfo,
+	     JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
+	     JDIMENSION in_row_groups_avail,
+	     JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+	     JDIMENSION out_rows_avail));
+#endif
+
+
+/*
+ * Initialize for a processing pass.
+ */
+
+METHODDEF(void)
+start_pass_dpost (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)
+{
+  my_post_ptr post = (my_post_ptr) cinfo->post;
+
+  switch (pass_mode) {
+  case JBUF_PASS_THRU:
+    if (cinfo->quantize_colors) {
+      /* Single-pass processing with color quantization. */
+      post->pub.post_process_data = post_process_1pass;
+      /* We could be doing buffered-image output before starting a 2-pass
+       * color quantization; in that case, jinit_d_post_controller did not
+       * allocate a strip buffer.  Use the virtual-array buffer as workspace.
+       */
+      if (post->buffer == NULL) {
+	post->buffer = (*cinfo->mem->access_virt_sarray)
+	  ((j_common_ptr) cinfo, post->whole_image,
+	   (JDIMENSION) 0, post->strip_height, TRUE);
+      }
+    } else {
+      /* For single-pass processing without color quantization,
+       * I have no work to do; just call the upsampler directly.
+       */
+      post->pub.post_process_data = cinfo->upsample->upsample;
+    }
+    break;
+#ifdef QUANT_2PASS_SUPPORTED
+  case JBUF_SAVE_AND_PASS:
+    /* First pass of 2-pass quantization */
+    if (post->whole_image == NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    post->pub.post_process_data = post_process_prepass;
+    break;
+  case JBUF_CRANK_DEST:
+    /* Second pass of 2-pass quantization */
+    if (post->whole_image == NULL)
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    post->pub.post_process_data = post_process_2pass;
+    break;
+#endif /* QUANT_2PASS_SUPPORTED */
+  default:
+    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+    break;
+  }
+  post->starting_row = post->next_row = 0;
+}
+
+
+/*
+ * Process some data in the one-pass (strip buffer) case.
+ * This is used for color precision reduction as well as one-pass quantization.
+ */
+
+METHODDEF(void)
+post_process_1pass (j_decompress_ptr cinfo,
+		    JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
+		    JDIMENSION in_row_groups_avail,
+		    JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+		    JDIMENSION out_rows_avail)
+{
+  my_post_ptr post = (my_post_ptr) cinfo->post;
+  JDIMENSION num_rows, max_rows;
+
+  /* Fill the buffer, but not more than what we can dump out in one go. */
+  /* Note we rely on the upsampler to detect bottom of image. */
+  max_rows = out_rows_avail - *out_row_ctr;
+  if (max_rows > post->strip_height)
+    max_rows = post->strip_height;
+  num_rows = 0;
+  (*cinfo->upsample->upsample) (cinfo,
+		input_buf, in_row_group_ctr, in_row_groups_avail,
+		post->buffer, &num_rows, max_rows);
+  /* Quantize and emit data. */
+  (*cinfo->cquantize->color_quantize) (cinfo,
+		post->buffer, output_buf + *out_row_ctr, (int) num_rows);
+  *out_row_ctr += num_rows;
+}
+
+
+#ifdef QUANT_2PASS_SUPPORTED
+
+/*
+ * Process some data in the first pass of 2-pass quantization.
+ */
+
+METHODDEF(void)
+post_process_prepass (j_decompress_ptr cinfo,
+		      JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
+		      JDIMENSION in_row_groups_avail,
+		      JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+		      JDIMENSION out_rows_avail)
+{
+  my_post_ptr post = (my_post_ptr) cinfo->post;
+  JDIMENSION old_next_row, num_rows;
+
+  /* Reposition virtual buffer if at start of strip. */
+  if (post->next_row == 0) {
+    post->buffer = (*cinfo->mem->access_virt_sarray)
+	((j_common_ptr) cinfo, post->whole_image,
+	 post->starting_row, post->strip_height, TRUE);
+  }
+
+  /* Upsample some data (up to a strip height's worth). */
+  old_next_row = post->next_row;
+  (*cinfo->upsample->upsample) (cinfo,
+		input_buf, in_row_group_ctr, in_row_groups_avail,
+		post->buffer, &post->next_row, post->strip_height);
+
+  /* Allow quantizer to scan new data.  No data is emitted, */
+  /* but we advance out_row_ctr so outer loop can tell when we're done. */
+  if (post->next_row > old_next_row) {
+    num_rows = post->next_row - old_next_row;
+    (*cinfo->cquantize->color_quantize) (cinfo, post->buffer + old_next_row,
+					 (JSAMPARRAY) NULL, (int) num_rows);
+    *out_row_ctr += num_rows;
+  }
+
+  /* Advance if we filled the strip. */
+  if (post->next_row >= post->strip_height) {
+    post->starting_row += post->strip_height;
+    post->next_row = 0;
+  }
+}
+
+
+/*
+ * Process some data in the second pass of 2-pass quantization.
+ */
+
+METHODDEF(void)
+post_process_2pass (j_decompress_ptr cinfo,
+		    JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
+		    JDIMENSION in_row_groups_avail,
+		    JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+		    JDIMENSION out_rows_avail)
+{
+  my_post_ptr post = (my_post_ptr) cinfo->post;
+  JDIMENSION num_rows, max_rows;
+
+  /* Reposition virtual buffer if at start of strip. */
+  if (post->next_row == 0) {
+    post->buffer = (*cinfo->mem->access_virt_sarray)
+	((j_common_ptr) cinfo, post->whole_image,
+	 post->starting_row, post->strip_height, FALSE);
+  }
+
+  /* Determine number of rows to emit. */
+  num_rows = post->strip_height - post->next_row; /* available in strip */
+  max_rows = out_rows_avail - *out_row_ctr; /* available in output area */
+  if (num_rows > max_rows)
+    num_rows = max_rows;
+  /* We have to check bottom of image here, can't depend on upsampler. */
+  max_rows = cinfo->output_height - post->starting_row;
+  if (num_rows > max_rows)
+    num_rows = max_rows;
+
+  /* Quantize and emit data. */
+  (*cinfo->cquantize->color_quantize) (cinfo,
+		post->buffer + post->next_row, output_buf + *out_row_ctr,
+		(int) num_rows);
+  *out_row_ctr += num_rows;
+
+  /* Advance if we filled the strip. */
+  post->next_row += num_rows;
+  if (post->next_row >= post->strip_height) {
+    post->starting_row += post->strip_height;
+    post->next_row = 0;
+  }
+}
+
+#endif /* QUANT_2PASS_SUPPORTED */
+
+
+/*
+ * Initialize postprocessing controller.
+ */
+
+GLOBAL(void)
+jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
+{
+  my_post_ptr post;
+
+  post = (my_post_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_post_controller));
+  cinfo->post = (struct jpeg_d_post_controller *) post;
+  post->pub.start_pass = start_pass_dpost;
+  post->whole_image = NULL;	/* flag for no virtual arrays */
+  post->buffer = NULL;		/* flag for no strip buffer */
+
+  /* Create the quantization buffer, if needed */
+  if (cinfo->quantize_colors) {
+    /* The buffer strip height is max_v_samp_factor, which is typically
+     * an efficient number of rows for upsampling to return.
+     * (In the presence of output rescaling, we might want to be smarter?)
+     */
+    post->strip_height = (JDIMENSION) cinfo->max_v_samp_factor;
+    if (need_full_buffer) {
+      /* Two-pass color quantization: need full-image storage. */
+      /* We round up the number of rows to a multiple of the strip height. */
+#ifdef QUANT_2PASS_SUPPORTED
+      post->whole_image = (*cinfo->mem->request_virt_sarray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+	 cinfo->output_width * cinfo->out_color_components,
+	 (JDIMENSION) jround_up((long) cinfo->output_height,
+				(long) post->strip_height),
+	 post->strip_height);
+#else
+      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
+#endif /* QUANT_2PASS_SUPPORTED */
+    } else {
+      /* One-pass color quantization: just make a strip buffer. */
+      post->buffer = (*cinfo->mem->alloc_sarray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE,
+	 cinfo->output_width * cinfo->out_color_components,
+	 post->strip_height);
+    }
+  }
+}
diff --git a/jpeg-8d/jdsample.c b/jpeg-8d/jdsample.c
new file mode 100644
index 0000000..7bc8885
--- /dev/null
+++ b/jpeg-8d/jdsample.c
@@ -0,0 +1,361 @@
+/*
+ * jdsample.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2002-2008 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains upsampling routines.
+ *
+ * Upsampling input data is counted in "row groups".  A row group
+ * is defined to be (v_samp_factor * DCT_v_scaled_size / min_DCT_v_scaled_size)
+ * sample rows of each component.  Upsampling will normally produce
+ * max_v_samp_factor pixel rows from each row group (but this could vary
+ * if the upsampler is applying a scale factor of its own).
+ *
+ * An excellent reference for image resampling is
+ *   Digital Image Warping, George Wolberg, 1990.
+ *   Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Pointer to routine to upsample a single component */
+typedef JMETHOD(void, upsample1_ptr,
+		(j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr));
+
+/* Private subobject */
+
+typedef struct {
+  struct jpeg_upsampler pub;	/* public fields */
+
+  /* Color conversion buffer.  When using separate upsampling and color
+   * conversion steps, this buffer holds one upsampled row group until it
+   * has been color converted and output.
+   * Note: we do not allocate any storage for component(s) which are full-size,
+   * ie do not need rescaling.  The corresponding entry of color_buf[] is
+   * simply set to point to the input data array, thereby avoiding copying.
+   */
+  JSAMPARRAY color_buf[MAX_COMPONENTS];
+
+  /* Per-component upsampling method pointers */
+  upsample1_ptr methods[MAX_COMPONENTS];
+
+  int next_row_out;		/* counts rows emitted from color_buf */
+  JDIMENSION rows_to_go;	/* counts rows remaining in image */
+
+  /* Height of an input row group for each component. */
+  int rowgroup_height[MAX_COMPONENTS];
+
+  /* These arrays save pixel expansion factors so that int_expand need not
+   * recompute them each time.  They are unused for other upsampling methods.
+   */
+  UINT8 h_expand[MAX_COMPONENTS];
+  UINT8 v_expand[MAX_COMPONENTS];
+} my_upsampler;
+
+typedef my_upsampler * my_upsample_ptr;
+
+
+/*
+ * Initialize for an upsampling pass.
+ */
+
+METHODDEF(void)
+start_pass_upsample (j_decompress_ptr cinfo)
+{
+  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
+
+  /* Mark the conversion buffer empty */
+  upsample->next_row_out = cinfo->max_v_samp_factor;
+  /* Initialize total-height counter for detecting bottom of image */
+  upsample->rows_to_go = cinfo->output_height;
+}
+
+
+/*
+ * Control routine to do upsampling (and color conversion).
+ *
+ * In this version we upsample each component independently.
+ * We upsample one row group into the conversion buffer, then apply
+ * color conversion a row at a time.
+ */
+
+METHODDEF(void)
+sep_upsample (j_decompress_ptr cinfo,
+	      JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
+	      JDIMENSION in_row_groups_avail,
+	      JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+	      JDIMENSION out_rows_avail)
+{
+  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
+  int ci;
+  jpeg_component_info * compptr;
+  JDIMENSION num_rows;
+
+  /* Fill the conversion buffer, if it's empty */
+  if (upsample->next_row_out >= cinfo->max_v_samp_factor) {
+    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+	 ci++, compptr++) {
+      /* Invoke per-component upsample method.  Notice we pass a POINTER
+       * to color_buf[ci], so that fullsize_upsample can change it.
+       */
+      (*upsample->methods[ci]) (cinfo, compptr,
+	input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]),
+	upsample->color_buf + ci);
+    }
+    upsample->next_row_out = 0;
+  }
+
+  /* Color-convert and emit rows */
+
+  /* How many we have in the buffer: */
+  num_rows = (JDIMENSION) (cinfo->max_v_samp_factor - upsample->next_row_out);
+  /* Not more than the distance to the end of the image.  Need this test
+   * in case the image height is not a multiple of max_v_samp_factor:
+   */
+  if (num_rows > upsample->rows_to_go) 
+    num_rows = upsample->rows_to_go;
+  /* And not more than what the client can accept: */
+  out_rows_avail -= *out_row_ctr;
+  if (num_rows > out_rows_avail)
+    num_rows = out_rows_avail;
+
+  (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf,
+				     (JDIMENSION) upsample->next_row_out,
+				     output_buf + *out_row_ctr,
+				     (int) num_rows);
+
+  /* Adjust counts */
+  *out_row_ctr += num_rows;
+  upsample->rows_to_go -= num_rows;
+  upsample->next_row_out += num_rows;
+  /* When the buffer is emptied, declare this input row group consumed */
+  if (upsample->next_row_out >= cinfo->max_v_samp_factor)
+    (*in_row_group_ctr)++;
+}
+
+
+/*
+ * These are the routines invoked by sep_upsample to upsample pixel values
+ * of a single component.  One row group is processed per call.
+ */
+
+
+/*
+ * For full-size components, we just make color_buf[ci] point at the
+ * input buffer, and thus avoid copying any data.  Note that this is
+ * safe only because sep_upsample doesn't declare the input row group
+ * "consumed" until we are done color converting and emitting it.
+ */
+
+METHODDEF(void)
+fullsize_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		   JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
+{
+  *output_data_ptr = input_data;
+}
+
+
+/*
+ * This is a no-op version used for "uninteresting" components.
+ * These components will not be referenced by color conversion.
+ */
+
+METHODDEF(void)
+noop_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
+{
+  *output_data_ptr = NULL;	/* safety check */
+}
+
+
+/*
+ * This version handles any integral sampling ratios.
+ * This is not used for typical JPEG files, so it need not be fast.
+ * Nor, for that matter, is it particularly accurate: the algorithm is
+ * simple replication of the input pixel onto the corresponding output
+ * pixels.  The hi-falutin sampling literature refers to this as a
+ * "box filter".  A box filter tends to introduce visible artifacts,
+ * so if you are actually going to use 3:1 or 4:1 sampling ratios
+ * you would be well advised to improve this code.
+ */
+
+METHODDEF(void)
+int_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	      JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
+{
+  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
+  JSAMPARRAY output_data = *output_data_ptr;
+  register JSAMPROW inptr, outptr;
+  register JSAMPLE invalue;
+  register int h;
+  JSAMPROW outend;
+  int h_expand, v_expand;
+  int inrow, outrow;
+
+  h_expand = upsample->h_expand[compptr->component_index];
+  v_expand = upsample->v_expand[compptr->component_index];
+
+  inrow = outrow = 0;
+  while (outrow < cinfo->max_v_samp_factor) {
+    /* Generate one output row with proper horizontal expansion */
+    inptr = input_data[inrow];
+    outptr = output_data[outrow];
+    outend = outptr + cinfo->output_width;
+    while (outptr < outend) {
+      invalue = *inptr++;	/* don't need GETJSAMPLE() here */
+      for (h = h_expand; h > 0; h--) {
+	*outptr++ = invalue;
+      }
+    }
+    /* Generate any additional output rows by duplicating the first one */
+    if (v_expand > 1) {
+      jcopy_sample_rows(output_data, outrow, output_data, outrow+1,
+			v_expand-1, cinfo->output_width);
+    }
+    inrow++;
+    outrow += v_expand;
+  }
+}
+
+
+/*
+ * Fast processing for the common case of 2:1 horizontal and 1:1 vertical.
+ * It's still a box filter.
+ */
+
+METHODDEF(void)
+h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
+{
+  JSAMPARRAY output_data = *output_data_ptr;
+  register JSAMPROW inptr, outptr;
+  register JSAMPLE invalue;
+  JSAMPROW outend;
+  int outrow;
+
+  for (outrow = 0; outrow < cinfo->max_v_samp_factor; outrow++) {
+    inptr = input_data[outrow];
+    outptr = output_data[outrow];
+    outend = outptr + cinfo->output_width;
+    while (outptr < outend) {
+      invalue = *inptr++;	/* don't need GETJSAMPLE() here */
+      *outptr++ = invalue;
+      *outptr++ = invalue;
+    }
+  }
+}
+
+
+/*
+ * Fast processing for the common case of 2:1 horizontal and 2:1 vertical.
+ * It's still a box filter.
+ */
+
+METHODDEF(void)
+h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
+{
+  JSAMPARRAY output_data = *output_data_ptr;
+  register JSAMPROW inptr, outptr;
+  register JSAMPLE invalue;
+  JSAMPROW outend;
+  int inrow, outrow;
+
+  inrow = outrow = 0;
+  while (outrow < cinfo->max_v_samp_factor) {
+    inptr = input_data[inrow];
+    outptr = output_data[outrow];
+    outend = outptr + cinfo->output_width;
+    while (outptr < outend) {
+      invalue = *inptr++;	/* don't need GETJSAMPLE() here */
+      *outptr++ = invalue;
+      *outptr++ = invalue;
+    }
+    jcopy_sample_rows(output_data, outrow, output_data, outrow+1,
+		      1, cinfo->output_width);
+    inrow++;
+    outrow += 2;
+  }
+}
+
+
+/*
+ * Module initialization routine for upsampling.
+ */
+
+GLOBAL(void)
+jinit_upsampler (j_decompress_ptr cinfo)
+{
+  my_upsample_ptr upsample;
+  int ci;
+  jpeg_component_info * compptr;
+  boolean need_buffer;
+  int h_in_group, v_in_group, h_out_group, v_out_group;
+
+  upsample = (my_upsample_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_upsampler));
+  cinfo->upsample = (struct jpeg_upsampler *) upsample;
+  upsample->pub.start_pass = start_pass_upsample;
+  upsample->pub.upsample = sep_upsample;
+  upsample->pub.need_context_rows = FALSE; /* until we find out differently */
+
+  if (cinfo->CCIR601_sampling)	/* this isn't supported */
+    ERREXIT(cinfo, JERR_CCIR601_NOTIMPL);
+
+  /* Verify we can handle the sampling factors, select per-component methods,
+   * and create storage as needed.
+   */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Compute size of an "input group" after IDCT scaling.  This many samples
+     * are to be converted to max_h_samp_factor * max_v_samp_factor pixels.
+     */
+    h_in_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) /
+		 cinfo->min_DCT_h_scaled_size;
+    v_in_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+		 cinfo->min_DCT_v_scaled_size;
+    h_out_group = cinfo->max_h_samp_factor;
+    v_out_group = cinfo->max_v_samp_factor;
+    upsample->rowgroup_height[ci] = v_in_group; /* save for use later */
+    need_buffer = TRUE;
+    if (! compptr->component_needed) {
+      /* Don't bother to upsample an uninteresting component. */
+      upsample->methods[ci] = noop_upsample;
+      need_buffer = FALSE;
+    } else if (h_in_group == h_out_group && v_in_group == v_out_group) {
+      /* Fullsize components can be processed without any work. */
+      upsample->methods[ci] = fullsize_upsample;
+      need_buffer = FALSE;
+    } else if (h_in_group * 2 == h_out_group &&
+	       v_in_group == v_out_group) {
+      /* Special case for 2h1v upsampling */
+      upsample->methods[ci] = h2v1_upsample;
+    } else if (h_in_group * 2 == h_out_group &&
+	       v_in_group * 2 == v_out_group) {
+      /* Special case for 2h2v upsampling */
+      upsample->methods[ci] = h2v2_upsample;
+    } else if ((h_out_group % h_in_group) == 0 &&
+	       (v_out_group % v_in_group) == 0) {
+      /* Generic integral-factors upsampling method */
+      upsample->methods[ci] = int_upsample;
+      upsample->h_expand[ci] = (UINT8) (h_out_group / h_in_group);
+      upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group);
+    } else
+      ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL);
+    if (need_buffer) {
+      upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray)
+	((j_common_ptr) cinfo, JPOOL_IMAGE,
+	 (JDIMENSION) jround_up((long) cinfo->output_width,
+				(long) cinfo->max_h_samp_factor),
+	 (JDIMENSION) cinfo->max_v_samp_factor);
+    }
+  }
+}
diff --git a/jpeg-8d/jdtrans.c b/jpeg-8d/jdtrans.c
new file mode 100644
index 0000000..22dd47f
--- /dev/null
+++ b/jpeg-8d/jdtrans.c
@@ -0,0 +1,140 @@
+/*
+ * jdtrans.c
+ *
+ * Copyright (C) 1995-1997, Thomas G. Lane.
+ * Modified 2000-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains library routines for transcoding decompression,
+ * that is, reading raw DCT coefficient arrays from an input JPEG file.
+ * The routines in jdapimin.c will also be needed by a transcoder.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Forward declarations */
+LOCAL(void) transdecode_master_selection JPP((j_decompress_ptr cinfo));
+
+
+/*
+ * Read the coefficient arrays from a JPEG file.
+ * jpeg_read_header must be completed before calling this.
+ *
+ * The entire image is read into a set of virtual coefficient-block arrays,
+ * one per component.  The return value is a pointer to the array of
+ * virtual-array descriptors.  These can be manipulated directly via the
+ * JPEG memory manager, or handed off to jpeg_write_coefficients().
+ * To release the memory occupied by the virtual arrays, call
+ * jpeg_finish_decompress() when done with the data.
+ *
+ * An alternative usage is to simply obtain access to the coefficient arrays
+ * during a buffered-image-mode decompression operation.  This is allowed
+ * after any jpeg_finish_output() call.  The arrays can be accessed until
+ * jpeg_finish_decompress() is called.  (Note that any call to the library
+ * may reposition the arrays, so don't rely on access_virt_barray() results
+ * to stay valid across library calls.)
+ *
+ * Returns NULL if suspended.  This case need be checked only if
+ * a suspending data source is used.
+ */
+
+GLOBAL(jvirt_barray_ptr *)
+jpeg_read_coefficients (j_decompress_ptr cinfo)
+{
+  if (cinfo->global_state == DSTATE_READY) {
+    /* First call: initialize active modules */
+    transdecode_master_selection(cinfo);
+    cinfo->global_state = DSTATE_RDCOEFS;
+  }
+  if (cinfo->global_state == DSTATE_RDCOEFS) {
+    /* Absorb whole file into the coef buffer */
+    for (;;) {
+      int retcode;
+      /* Call progress monitor hook if present */
+      if (cinfo->progress != NULL)
+	(*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+      /* Absorb some more input */
+      retcode = (*cinfo->inputctl->consume_input) (cinfo);
+      if (retcode == JPEG_SUSPENDED)
+	return NULL;
+      if (retcode == JPEG_REACHED_EOI)
+	break;
+      /* Advance progress counter if appropriate */
+      if (cinfo->progress != NULL &&
+	  (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
+	if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
+	  /* startup underestimated number of scans; ratchet up one scan */
+	  cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
+	}
+      }
+    }
+    /* Set state so that jpeg_finish_decompress does the right thing */
+    cinfo->global_state = DSTATE_STOPPING;
+  }
+  /* At this point we should be in state DSTATE_STOPPING if being used
+   * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access
+   * to the coefficients during a full buffered-image-mode decompression.
+   */
+  if ((cinfo->global_state == DSTATE_STOPPING ||
+       cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) {
+    return cinfo->coef->coef_arrays;
+  }
+  /* Oops, improper usage */
+  ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  return NULL;			/* keep compiler happy */
+}
+
+
+/*
+ * Master selection of decompression modules for transcoding.
+ * This substitutes for jdmaster.c's initialization of the full decompressor.
+ */
+
+LOCAL(void)
+transdecode_master_selection (j_decompress_ptr cinfo)
+{
+  /* This is effectively a buffered-image operation. */
+  cinfo->buffered_image = TRUE;
+
+  /* Compute output image dimensions and related values. */
+  jpeg_core_output_dimensions(cinfo);
+
+  /* Entropy decoding: either Huffman or arithmetic coding. */
+  if (cinfo->arith_code)
+    jinit_arith_decoder(cinfo);
+  else {
+    jinit_huff_decoder(cinfo);
+  }
+
+  /* Always get a full-image coefficient buffer. */
+  jinit_d_coef_controller(cinfo, TRUE);
+
+  /* We can now tell the memory manager to allocate virtual arrays. */
+  (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
+
+  /* Initialize input side of decompressor to consume first scan. */
+  (*cinfo->inputctl->start_input_pass) (cinfo);
+
+  /* Initialize progress monitoring. */
+  if (cinfo->progress != NULL) {
+    int nscans;
+    /* Estimate number of scans to set pass_limit. */
+    if (cinfo->progressive_mode) {
+      /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */
+      nscans = 2 + 3 * cinfo->num_components;
+    } else if (cinfo->inputctl->has_multiple_scans) {
+      /* For a nonprogressive multiscan file, estimate 1 scan per component. */
+      nscans = cinfo->num_components;
+    } else {
+      nscans = 1;
+    }
+    cinfo->progress->pass_counter = 0L;
+    cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans;
+    cinfo->progress->completed_passes = 0;
+    cinfo->progress->total_passes = 1;
+  }
+}
diff --git a/jpeg-8d/jerror.c b/jpeg-8d/jerror.c
new file mode 100644
index 0000000..3da7be8
--- /dev/null
+++ b/jpeg-8d/jerror.c
@@ -0,0 +1,252 @@
+/*
+ * jerror.c
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains simple error-reporting and trace-message routines.
+ * These are suitable for Unix-like systems and others where writing to
+ * stderr is the right thing to do.  Many applications will want to replace
+ * some or all of these routines.
+ *
+ * If you define USE_WINDOWS_MESSAGEBOX in jconfig.h or in the makefile,
+ * you get a Windows-specific hack to display error messages in a dialog box.
+ * It ain't much, but it beats dropping error messages into the bit bucket,
+ * which is what happens to output to stderr under most Windows C compilers.
+ *
+ * These routines are used by both the compression and decompression code.
+ */
+
+/* this is not a core library module, so it doesn't define JPEG_INTERNALS */
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jversion.h"
+#include "jerror.h"
+
+#ifdef USE_WINDOWS_MESSAGEBOX
+#include <windows.h>
+#endif
+
+#ifndef EXIT_FAILURE		/* define exit() codes if not provided */
+#define EXIT_FAILURE  1
+#endif
+
+
+/*
+ * Create the message string table.
+ * We do this from the master message list in jerror.h by re-reading
+ * jerror.h with a suitable definition for macro JMESSAGE.
+ * The message table is made an external symbol just in case any applications
+ * want to refer to it directly.
+ */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jpeg_std_message_table	jMsgTable
+#endif
+
+#define JMESSAGE(code,string)	string ,
+
+const char * const jpeg_std_message_table[] = {
+#include "jerror.h"
+  NULL
+};
+
+
+/*
+ * Error exit handler: must not return to caller.
+ *
+ * Applications may override this if they want to get control back after
+ * an error.  Typically one would longjmp somewhere instead of exiting.
+ * The setjmp buffer can be made a private field within an expanded error
+ * handler object.  Note that the info needed to generate an error message
+ * is stored in the error object, so you can generate the message now or
+ * later, at your convenience.
+ * You should make sure that the JPEG object is cleaned up (with jpeg_abort
+ * or jpeg_destroy) at some point.
+ */
+
+METHODDEF(void)
+error_exit (j_common_ptr cinfo)
+{
+  /* Always display the message */
+  (*cinfo->err->output_message) (cinfo);
+
+  /* Let the memory manager delete any temp files before we die */
+  jpeg_destroy(cinfo);
+
+  exit(EXIT_FAILURE);
+}
+
+
+/*
+ * Actual output of an error or trace message.
+ * Applications may override this method to send JPEG messages somewhere
+ * other than stderr.
+ *
+ * On Windows, printing to stderr is generally completely useless,
+ * so we provide optional code to produce an error-dialog popup.
+ * Most Windows applications will still prefer to override this routine,
+ * but if they don't, it'll do something at least marginally useful.
+ *
+ * NOTE: to use the library in an environment that doesn't support the
+ * C stdio library, you may have to delete the call to fprintf() entirely,
+ * not just not use this routine.
+ */
+
+METHODDEF(void)
+output_message (j_common_ptr cinfo)
+{
+  char buffer[JMSG_LENGTH_MAX];
+
+  /* Create the message */
+  (*cinfo->err->format_message) (cinfo, buffer);
+
+#ifdef USE_WINDOWS_MESSAGEBOX
+  /* Display it in a message dialog box */
+  MessageBox(GetActiveWindow(), buffer, "JPEG Library Error",
+	     MB_OK | MB_ICONERROR);
+#else
+  /* Send it to stderr, adding a newline */
+  fprintf(stderr, "%s\n", buffer);
+#endif
+}
+
+
+/*
+ * Decide whether to emit a trace or warning message.
+ * msg_level is one of:
+ *   -1: recoverable corrupt-data warning, may want to abort.
+ *    0: important advisory messages (always display to user).
+ *    1: first level of tracing detail.
+ *    2,3,...: successively more detailed tracing messages.
+ * An application might override this method if it wanted to abort on warnings
+ * or change the policy about which messages to display.
+ */
+
+METHODDEF(void)
+emit_message (j_common_ptr cinfo, int msg_level)
+{
+  struct jpeg_error_mgr * err = cinfo->err;
+
+  if (msg_level < 0) {
+    /* It's a warning message.  Since corrupt files may generate many warnings,
+     * the policy implemented here is to show only the first warning,
+     * unless trace_level >= 3.
+     */
+    if (err->num_warnings == 0 || err->trace_level >= 3)
+      (*err->output_message) (cinfo);
+    /* Always count warnings in num_warnings. */
+    err->num_warnings++;
+  } else {
+    /* It's a trace message.  Show it if trace_level >= msg_level. */
+    if (err->trace_level >= msg_level)
+      (*err->output_message) (cinfo);
+  }
+}
+
+
+/*
+ * Format a message string for the most recent JPEG error or message.
+ * The message is stored into buffer, which should be at least JMSG_LENGTH_MAX
+ * characters.  Note that no '\n' character is added to the string.
+ * Few applications should need to override this method.
+ */
+
+METHODDEF(void)
+format_message (j_common_ptr cinfo, char * buffer)
+{
+  struct jpeg_error_mgr * err = cinfo->err;
+  int msg_code = err->msg_code;
+  const char * msgtext = NULL;
+  const char * msgptr;
+  char ch;
+  boolean isstring;
+
+  /* Look up message string in proper table */
+  if (msg_code > 0 && msg_code <= err->last_jpeg_message) {
+    msgtext = err->jpeg_message_table[msg_code];
+  } else if (err->addon_message_table != NULL &&
+	     msg_code >= err->first_addon_message &&
+	     msg_code <= err->last_addon_message) {
+    msgtext = err->addon_message_table[msg_code - err->first_addon_message];
+  }
+
+  /* Defend against bogus message number */
+  if (msgtext == NULL) {
+    err->msg_parm.i[0] = msg_code;
+    msgtext = err->jpeg_message_table[0];
+  }
+
+  /* Check for string parameter, as indicated by %s in the message text */
+  isstring = FALSE;
+  msgptr = msgtext;
+  while ((ch = *msgptr++) != '\0') {
+    if (ch == '%') {
+      if (*msgptr == 's') isstring = TRUE;
+      break;
+    }
+  }
+
+  /* Format the message into the passed buffer */
+  if (isstring)
+    sprintf(buffer, msgtext, err->msg_parm.s);
+  else
+    sprintf(buffer, msgtext,
+	    err->msg_parm.i[0], err->msg_parm.i[1],
+	    err->msg_parm.i[2], err->msg_parm.i[3],
+	    err->msg_parm.i[4], err->msg_parm.i[5],
+	    err->msg_parm.i[6], err->msg_parm.i[7]);
+}
+
+
+/*
+ * Reset error state variables at start of a new image.
+ * This is called during compression startup to reset trace/error
+ * processing to default state, without losing any application-specific
+ * method pointers.  An application might possibly want to override
+ * this method if it has additional error processing state.
+ */
+
+METHODDEF(void)
+reset_error_mgr (j_common_ptr cinfo)
+{
+  cinfo->err->num_warnings = 0;
+  /* trace_level is not reset since it is an application-supplied parameter */
+  cinfo->err->msg_code = 0;	/* may be useful as a flag for "no error" */
+}
+
+
+/*
+ * Fill in the standard error-handling methods in a jpeg_error_mgr object.
+ * Typical call is:
+ *	struct jpeg_compress_struct cinfo;
+ *	struct jpeg_error_mgr err;
+ *
+ *	cinfo.err = jpeg_std_error(&err);
+ * after which the application may override some of the methods.
+ */
+
+GLOBAL(struct jpeg_error_mgr *)
+jpeg_std_error (struct jpeg_error_mgr * err)
+{
+  err->error_exit = error_exit;
+  err->emit_message = emit_message;
+  err->output_message = output_message;
+  err->format_message = format_message;
+  err->reset_error_mgr = reset_error_mgr;
+
+  err->trace_level = 0;		/* default = no tracing */
+  err->num_warnings = 0;	/* no warnings emitted yet */
+  err->msg_code = 0;		/* may be useful as a flag for "no error" */
+
+  /* Initialize message table pointers */
+  err->jpeg_message_table = jpeg_std_message_table;
+  err->last_jpeg_message = (int) JMSG_LASTMSGCODE - 1;
+
+  err->addon_message_table = NULL;
+  err->first_addon_message = 0;	/* for safety */
+  err->last_addon_message = 0;
+
+  return err;
+}
diff --git a/jpeg-8d/jerror.h b/jpeg-8d/jerror.h
new file mode 100644
index 0000000..1cfb2b1
--- /dev/null
+++ b/jpeg-8d/jerror.h
@@ -0,0 +1,304 @@
+/*
+ * jerror.h
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 1997-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file defines the error and message codes for the JPEG library.
+ * Edit this file to add new codes, or to translate the message strings to
+ * some other language.
+ * A set of error-reporting macros are defined too.  Some applications using
+ * the JPEG library may wish to include this file to get the error codes
+ * and/or the macros.
+ */
+
+/*
+ * To define the enum list of message codes, include this file without
+ * defining macro JMESSAGE.  To create a message string table, include it
+ * again with a suitable JMESSAGE definition (see jerror.c for an example).
+ */
+#ifndef JMESSAGE
+#ifndef JERROR_H
+/* First time through, define the enum list */
+#define JMAKE_ENUM_LIST
+#else
+/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */
+#define JMESSAGE(code,string)
+#endif /* JERROR_H */
+#endif /* JMESSAGE */
+
+#ifdef JMAKE_ENUM_LIST
+
+typedef enum {
+
+#define JMESSAGE(code,string)	code ,
+
+#endif /* JMAKE_ENUM_LIST */
+
+JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */
+
+/* For maintenance convenience, list is alphabetical by message code name */
+JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix")
+JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix")
+JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode")
+JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS")
+JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request")
+JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range")
+JMESSAGE(JERR_BAD_DCTSIZE, "DCT scaled block size %dx%d not supported")
+JMESSAGE(JERR_BAD_DROP_SAMPLING,
+	 "Component index %d: mismatching sampling ratio %d:%d, %d:%d, %c")
+JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition")
+JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace")
+JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace")
+JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length")
+JMESSAGE(JERR_BAD_LIB_VERSION,
+	 "Wrong JPEG library version: library is %d, caller expects %d")
+JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan")
+JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d")
+JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d")
+JMESSAGE(JERR_BAD_PROGRESSION,
+	 "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d")
+JMESSAGE(JERR_BAD_PROG_SCRIPT,
+	 "Invalid progressive parameters at scan script entry %d")
+JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors")
+JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d")
+JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d")
+JMESSAGE(JERR_BAD_STRUCT_SIZE,
+	 "JPEG parameter struct mismatch: library thinks size is %u, caller expects %u")
+JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access")
+JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small")
+JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here")
+JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet")
+JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d")
+JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request")
+JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d")
+JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x")
+JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d")
+JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d")
+JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)")
+JMESSAGE(JERR_EMS_READ, "Read from EMS failed")
+JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed")
+JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan")
+JMESSAGE(JERR_FILE_READ, "Input file read error")
+JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?")
+JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet")
+JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow")
+JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry")
+JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels")
+JMESSAGE(JERR_INPUT_EMPTY, "Empty input file")
+JMESSAGE(JERR_INPUT_EOF, "Premature end of input file")
+JMESSAGE(JERR_MISMATCHED_QUANT_TABLE,
+	 "Cannot transcode due to multiple use of quantization table %d")
+JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data")
+JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change")
+JMESSAGE(JERR_NOTIMPL, "Not implemented yet")
+JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time")
+JMESSAGE(JERR_NO_ARITH_TABLE, "Arithmetic table 0x%02x was not defined")
+JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported")
+JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined")
+JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image")
+JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined")
+JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x")
+JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)")
+JMESSAGE(JERR_QUANT_COMPONENTS,
+	 "Cannot quantize more than %d color components")
+JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors")
+JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors")
+JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers")
+JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker")
+JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x")
+JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers")
+JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF")
+JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s")
+JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file")
+JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file")
+JMESSAGE(JERR_TFILE_WRITE,
+	 "Write failed on temporary file --- out of disk space?")
+JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines")
+JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x")
+JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up")
+JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation")
+JMESSAGE(JERR_XMS_READ, "Read from XMS failed")
+JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed")
+JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT)
+JMESSAGE(JMSG_VERSION, JVERSION)
+JMESSAGE(JTRC_16BIT_TABLES,
+	 "Caution: quantization tables are too coarse for baseline JPEG")
+JMESSAGE(JTRC_ADOBE,
+	 "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d")
+JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u")
+JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u")
+JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x")
+JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x")
+JMESSAGE(JTRC_DQT, "Define Quantization Table %d  precision %d")
+JMESSAGE(JTRC_DRI, "Define Restart Interval %u")
+JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u")
+JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u")
+JMESSAGE(JTRC_EOI, "End Of Image")
+JMESSAGE(JTRC_HUFFBITS, "        %3d %3d %3d %3d %3d %3d %3d %3d")
+JMESSAGE(JTRC_JFIF, "JFIF APP0 marker: version %d.%02d, density %dx%d  %d")
+JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE,
+	 "Warning: thumbnail image size does not match data length %u")
+JMESSAGE(JTRC_JFIF_EXTENSION,
+	 "JFIF extension marker: type 0x%02x, length %u")
+JMESSAGE(JTRC_JFIF_THUMBNAIL, "    with %d x %d thumbnail image")
+JMESSAGE(JTRC_MISC_MARKER, "Miscellaneous marker 0x%02x, length %u")
+JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x")
+JMESSAGE(JTRC_QUANTVALS, "        %4u %4u %4u %4u %4u %4u %4u %4u")
+JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors")
+JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors")
+JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization")
+JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d")
+JMESSAGE(JTRC_RST, "RST%d")
+JMESSAGE(JTRC_SMOOTH_NOTIMPL,
+	 "Smoothing not supported with nonstandard sampling ratios")
+JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d")
+JMESSAGE(JTRC_SOF_COMPONENT, "    Component %d: %dhx%dv q=%d")
+JMESSAGE(JTRC_SOI, "Start of Image")
+JMESSAGE(JTRC_SOS, "Start Of Scan: %d components")
+JMESSAGE(JTRC_SOS_COMPONENT, "    Component %d: dc=%d ac=%d")
+JMESSAGE(JTRC_SOS_PARAMS, "  Ss=%d, Se=%d, Ah=%d, Al=%d")
+JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s")
+JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s")
+JMESSAGE(JTRC_THUMB_JPEG,
+	 "JFIF extension marker: JPEG-compressed thumbnail image, length %u")
+JMESSAGE(JTRC_THUMB_PALETTE,
+	 "JFIF extension marker: palette thumbnail image, length %u")
+JMESSAGE(JTRC_THUMB_RGB,
+	 "JFIF extension marker: RGB thumbnail image, length %u")
+JMESSAGE(JTRC_UNKNOWN_IDS,
+	 "Unrecognized component IDs %d %d %d, assuming YCbCr")
+JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u")
+JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u")
+JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d")
+JMESSAGE(JWRN_ARITH_BAD_CODE, "Corrupt JPEG data: bad arithmetic code")
+JMESSAGE(JWRN_BOGUS_PROGRESSION,
+	 "Inconsistent progression sequence for component %d coefficient %d")
+JMESSAGE(JWRN_EXTRANEOUS_DATA,
+	 "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x")
+JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment")
+JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code")
+JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d")
+JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file")
+JMESSAGE(JWRN_MUST_RESYNC,
+	 "Corrupt JPEG data: found marker 0x%02x instead of RST%d")
+JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG")
+JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines")
+
+#ifdef JMAKE_ENUM_LIST
+
+  JMSG_LASTMSGCODE
+} J_MESSAGE_CODE;
+
+#undef JMAKE_ENUM_LIST
+#endif /* JMAKE_ENUM_LIST */
+
+/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */
+#undef JMESSAGE
+
+
+#ifndef JERROR_H
+#define JERROR_H
+
+/* Macros to simplify using the error and trace message stuff */
+/* The first parameter is either type of cinfo pointer */
+
+/* Fatal errors (print message and exit) */
+#define ERREXIT(cinfo,code)  \
+  ((cinfo)->err->msg_code = (code), \
+   (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
+#define ERREXIT1(cinfo,code,p1)  \
+  ((cinfo)->err->msg_code = (code), \
+   (cinfo)->err->msg_parm.i[0] = (p1), \
+   (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
+#define ERREXIT2(cinfo,code,p1,p2)  \
+  ((cinfo)->err->msg_code = (code), \
+   (cinfo)->err->msg_parm.i[0] = (p1), \
+   (cinfo)->err->msg_parm.i[1] = (p2), \
+   (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
+#define ERREXIT3(cinfo,code,p1,p2,p3)  \
+  ((cinfo)->err->msg_code = (code), \
+   (cinfo)->err->msg_parm.i[0] = (p1), \
+   (cinfo)->err->msg_parm.i[1] = (p2), \
+   (cinfo)->err->msg_parm.i[2] = (p3), \
+   (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
+#define ERREXIT4(cinfo,code,p1,p2,p3,p4)  \
+  ((cinfo)->err->msg_code = (code), \
+   (cinfo)->err->msg_parm.i[0] = (p1), \
+   (cinfo)->err->msg_parm.i[1] = (p2), \
+   (cinfo)->err->msg_parm.i[2] = (p3), \
+   (cinfo)->err->msg_parm.i[3] = (p4), \
+   (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
+#define ERREXIT6(cinfo,code,p1,p2,p3,p4,p5,p6)  \
+  ((cinfo)->err->msg_code = (code), \
+   (cinfo)->err->msg_parm.i[0] = (p1), \
+   (cinfo)->err->msg_parm.i[1] = (p2), \
+   (cinfo)->err->msg_parm.i[2] = (p3), \
+   (cinfo)->err->msg_parm.i[3] = (p4), \
+   (cinfo)->err->msg_parm.i[4] = (p5), \
+   (cinfo)->err->msg_parm.i[5] = (p6), \
+   (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
+#define ERREXITS(cinfo,code,str)  \
+  ((cinfo)->err->msg_code = (code), \
+   strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \
+   (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
+
+#define MAKESTMT(stuff)		do { stuff } while (0)
+
+/* Nonfatal errors (we can keep going, but the data is probably corrupt) */
+#define WARNMS(cinfo,code)  \
+  ((cinfo)->err->msg_code = (code), \
+   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1))
+#define WARNMS1(cinfo,code,p1)  \
+  ((cinfo)->err->msg_code = (code), \
+   (cinfo)->err->msg_parm.i[0] = (p1), \
+   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1))
+#define WARNMS2(cinfo,code,p1,p2)  \
+  ((cinfo)->err->msg_code = (code), \
+   (cinfo)->err->msg_parm.i[0] = (p1), \
+   (cinfo)->err->msg_parm.i[1] = (p2), \
+   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1))
+
+/* Informational/debugging messages */
+#define TRACEMS(cinfo,lvl,code)  \
+  ((cinfo)->err->msg_code = (code), \
+   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)))
+#define TRACEMS1(cinfo,lvl,code,p1)  \
+  ((cinfo)->err->msg_code = (code), \
+   (cinfo)->err->msg_parm.i[0] = (p1), \
+   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)))
+#define TRACEMS2(cinfo,lvl,code,p1,p2)  \
+  ((cinfo)->err->msg_code = (code), \
+   (cinfo)->err->msg_parm.i[0] = (p1), \
+   (cinfo)->err->msg_parm.i[1] = (p2), \
+   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)))
+#define TRACEMS3(cinfo,lvl,code,p1,p2,p3)  \
+  MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \
+	   _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \
+	   (cinfo)->err->msg_code = (code); \
+	   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); )
+#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4)  \
+  MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \
+	   _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \
+	   (cinfo)->err->msg_code = (code); \
+	   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); )
+#define TRACEMS5(cinfo,lvl,code,p1,p2,p3,p4,p5)  \
+  MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \
+	   _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \
+	   _mp[4] = (p5); \
+	   (cinfo)->err->msg_code = (code); \
+	   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); )
+#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8)  \
+  MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \
+	   _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \
+	   _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \
+	   (cinfo)->err->msg_code = (code); \
+	   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); )
+#define TRACEMSS(cinfo,lvl,code,str)  \
+  ((cinfo)->err->msg_code = (code), \
+   strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \
+   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)))
+
+#endif /* JERROR_H */
diff --git a/jpeg-8d/jfdctflt.c b/jpeg-8d/jfdctflt.c
new file mode 100644
index 0000000..74d0d86
--- /dev/null
+++ b/jpeg-8d/jfdctflt.c
@@ -0,0 +1,174 @@
+/*
+ * jfdctflt.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2003-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a floating-point implementation of the
+ * forward DCT (Discrete Cosine Transform).
+ *
+ * This implementation should be more accurate than either of the integer
+ * DCT implementations.  However, it may not give the same results on all
+ * machines because of differences in roundoff behavior.  Speed will depend
+ * on the hardware's floating point capacity.
+ *
+ * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT
+ * on each column.  Direct algorithms are also available, but they are
+ * much more complex and seem not to be any faster when reduced to code.
+ *
+ * This implementation is based on Arai, Agui, and Nakajima's algorithm for
+ * scaled DCT.  Their original paper (Trans. IEICE E-71(11):1095) is in
+ * Japanese, but the algorithm is described in the Pennebaker & Mitchell
+ * JPEG textbook (see REFERENCES section in file README).  The following code
+ * is based directly on figure 4-8 in P&M.
+ * While an 8-point DCT cannot be done in less than 11 multiplies, it is
+ * possible to arrange the computation so that many of the multiplies are
+ * simple scalings of the final outputs.  These multiplies can then be
+ * folded into the multiplications or divisions by the JPEG quantization
+ * table entries.  The AA&N method leaves only 5 multiplies and 29 adds
+ * to be done in the DCT itself.
+ * The primary disadvantage of this method is that with a fixed-point
+ * implementation, accuracy is lost due to imprecise representation of the
+ * scaled quantization values.  However, that problem does not arise if
+ * we use floating point arithmetic.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+#ifdef DCT_FLOAT_SUPPORTED
+
+
+/*
+ * This module is specialized to the case DCTSIZE = 8.
+ */
+
+#if DCTSIZE != 8
+  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+#endif
+
+
+/*
+ * Perform the forward DCT on one block of samples.
+ */
+
+GLOBAL(void)
+jpeg_fdct_float (FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+  FAST_FLOAT tmp10, tmp11, tmp12, tmp13;
+  FAST_FLOAT z1, z2, z3, z4, z5, z11, z13;
+  FAST_FLOAT *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+
+  /* Pass 1: process rows. */
+
+  dataptr = data;
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Load data into workspace */
+    tmp0 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]));
+    tmp7 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]));
+    tmp1 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]));
+    tmp6 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]));
+    tmp2 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]));
+    tmp5 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]));
+    tmp3 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]));
+    tmp4 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]));
+
+    /* Even part */
+
+    tmp10 = tmp0 + tmp3;	/* phase 2 */
+    tmp13 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp1 - tmp2;
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */
+    dataptr[4] = tmp10 - tmp11;
+
+    z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */
+    dataptr[2] = tmp13 + z1;	/* phase 5 */
+    dataptr[6] = tmp13 - z1;
+
+    /* Odd part */
+
+    tmp10 = tmp4 + tmp5;	/* phase 2 */
+    tmp11 = tmp5 + tmp6;
+    tmp12 = tmp6 + tmp7;
+
+    /* The rotator is modified from fig 4-8 to avoid extra negations. */
+    z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */
+    z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */
+    z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */
+    z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */
+
+    z11 = tmp7 + z3;		/* phase 5 */
+    z13 = tmp7 - z3;
+
+    dataptr[5] = z13 + z2;	/* phase 6 */
+    dataptr[3] = z13 - z2;
+    dataptr[1] = z11 + z4;
+    dataptr[7] = z11 - z4;
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns. */
+
+  dataptr = data;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7];
+    tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6];
+    tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5];
+    tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
+    tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
+
+    /* Even part */
+
+    tmp10 = tmp0 + tmp3;	/* phase 2 */
+    tmp13 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp1 - tmp2;
+
+    dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */
+    dataptr[DCTSIZE*4] = tmp10 - tmp11;
+
+    z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */
+    dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */
+    dataptr[DCTSIZE*6] = tmp13 - z1;
+
+    /* Odd part */
+
+    tmp10 = tmp4 + tmp5;	/* phase 2 */
+    tmp11 = tmp5 + tmp6;
+    tmp12 = tmp6 + tmp7;
+
+    /* The rotator is modified from fig 4-8 to avoid extra negations. */
+    z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */
+    z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */
+    z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */
+    z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */
+
+    z11 = tmp7 + z3;		/* phase 5 */
+    z13 = tmp7 - z3;
+
+    dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */
+    dataptr[DCTSIZE*3] = z13 - z2;
+    dataptr[DCTSIZE*1] = z11 + z4;
+    dataptr[DCTSIZE*7] = z11 - z4;
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+#endif /* DCT_FLOAT_SUPPORTED */
diff --git a/jpeg-8d/jfdctfst.c b/jpeg-8d/jfdctfst.c
new file mode 100644
index 0000000..8cad5f2
--- /dev/null
+++ b/jpeg-8d/jfdctfst.c
@@ -0,0 +1,230 @@
+/*
+ * jfdctfst.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2003-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a fast, not so accurate integer implementation of the
+ * forward DCT (Discrete Cosine Transform).
+ *
+ * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT
+ * on each column.  Direct algorithms are also available, but they are
+ * much more complex and seem not to be any faster when reduced to code.
+ *
+ * This implementation is based on Arai, Agui, and Nakajima's algorithm for
+ * scaled DCT.  Their original paper (Trans. IEICE E-71(11):1095) is in
+ * Japanese, but the algorithm is described in the Pennebaker & Mitchell
+ * JPEG textbook (see REFERENCES section in file README).  The following code
+ * is based directly on figure 4-8 in P&M.
+ * While an 8-point DCT cannot be done in less than 11 multiplies, it is
+ * possible to arrange the computation so that many of the multiplies are
+ * simple scalings of the final outputs.  These multiplies can then be
+ * folded into the multiplications or divisions by the JPEG quantization
+ * table entries.  The AA&N method leaves only 5 multiplies and 29 adds
+ * to be done in the DCT itself.
+ * The primary disadvantage of this method is that with fixed-point math,
+ * accuracy is lost due to imprecise representation of the scaled
+ * quantization values.  The smaller the quantization table entry, the less
+ * precise the scaled value, so this implementation does worse with high-
+ * quality-setting files than with low-quality ones.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+#ifdef DCT_IFAST_SUPPORTED
+
+
+/*
+ * This module is specialized to the case DCTSIZE = 8.
+ */
+
+#if DCTSIZE != 8
+  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+#endif
+
+
+/* Scaling decisions are generally the same as in the LL&M algorithm;
+ * see jfdctint.c for more details.  However, we choose to descale
+ * (right shift) multiplication products as soon as they are formed,
+ * rather than carrying additional fractional bits into subsequent additions.
+ * This compromises accuracy slightly, but it lets us save a few shifts.
+ * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples)
+ * everywhere except in the multiplications proper; this saves a good deal
+ * of work on 16-bit-int machines.
+ *
+ * Again to save a few shifts, the intermediate results between pass 1 and
+ * pass 2 are not upscaled, but are represented only to integral precision.
+ *
+ * A final compromise is to represent the multiplicative constants to only
+ * 8 fractional bits, rather than 13.  This saves some shifting work on some
+ * machines, and may also reduce the cost of multiplication (since there
+ * are fewer one-bits in the constants).
+ */
+
+#define CONST_BITS  8
+
+
+/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
+ * causing a lot of useless floating-point operations at run time.
+ * To get around this we use the following pre-calculated constants.
+ * If you change CONST_BITS you may want to add appropriate values.
+ * (With a reasonable C compiler, you can just rely on the FIX() macro...)
+ */
+
+#if CONST_BITS == 8
+#define FIX_0_382683433  ((INT32)   98)		/* FIX(0.382683433) */
+#define FIX_0_541196100  ((INT32)  139)		/* FIX(0.541196100) */
+#define FIX_0_707106781  ((INT32)  181)		/* FIX(0.707106781) */
+#define FIX_1_306562965  ((INT32)  334)		/* FIX(1.306562965) */
+#else
+#define FIX_0_382683433  FIX(0.382683433)
+#define FIX_0_541196100  FIX(0.541196100)
+#define FIX_0_707106781  FIX(0.707106781)
+#define FIX_1_306562965  FIX(1.306562965)
+#endif
+
+
+/* We can gain a little more speed, with a further compromise in accuracy,
+ * by omitting the addition in a descaling shift.  This yields an incorrectly
+ * rounded result half the time...
+ */
+
+#ifndef USE_ACCURATE_ROUNDING
+#undef DESCALE
+#define DESCALE(x,n)  RIGHT_SHIFT(x, n)
+#endif
+
+
+/* Multiply a DCTELEM variable by an INT32 constant, and immediately
+ * descale to yield a DCTELEM result.
+ */
+
+#define MULTIPLY(var,const)  ((DCTELEM) DESCALE((var) * (const), CONST_BITS))
+
+
+/*
+ * Perform the forward DCT on one block of samples.
+ */
+
+GLOBAL(void)
+jpeg_fdct_ifast (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+  DCTELEM tmp10, tmp11, tmp12, tmp13;
+  DCTELEM z1, z2, z3, z4, z5, z11, z13;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+
+  dataptr = data;
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Load data into workspace */
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]);
+    tmp7 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]);
+    tmp6 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]);
+    tmp5 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]);
+    tmp4 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]);
+
+    /* Even part */
+
+    tmp10 = tmp0 + tmp3;	/* phase 2 */
+    tmp13 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp1 - tmp2;
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */
+    dataptr[4] = tmp10 - tmp11;
+
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
+    dataptr[2] = tmp13 + z1;	/* phase 5 */
+    dataptr[6] = tmp13 - z1;
+
+    /* Odd part */
+
+    tmp10 = tmp4 + tmp5;	/* phase 2 */
+    tmp11 = tmp5 + tmp6;
+    tmp12 = tmp6 + tmp7;
+
+    /* The rotator is modified from fig 4-8 to avoid extra negations. */
+    z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */
+    z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */
+    z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */
+    z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */
+
+    z11 = tmp7 + z3;		/* phase 5 */
+    z13 = tmp7 - z3;
+
+    dataptr[5] = z13 + z2;	/* phase 6 */
+    dataptr[3] = z13 - z2;
+    dataptr[1] = z11 + z4;
+    dataptr[7] = z11 - z4;
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns. */
+
+  dataptr = data;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7];
+    tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6];
+    tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5];
+    tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
+    tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
+
+    /* Even part */
+
+    tmp10 = tmp0 + tmp3;	/* phase 2 */
+    tmp13 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp1 - tmp2;
+
+    dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */
+    dataptr[DCTSIZE*4] = tmp10 - tmp11;
+
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
+    dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */
+    dataptr[DCTSIZE*6] = tmp13 - z1;
+
+    /* Odd part */
+
+    tmp10 = tmp4 + tmp5;	/* phase 2 */
+    tmp11 = tmp5 + tmp6;
+    tmp12 = tmp6 + tmp7;
+
+    /* The rotator is modified from fig 4-8 to avoid extra negations. */
+    z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */
+    z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */
+    z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */
+    z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */
+
+    z11 = tmp7 + z3;		/* phase 5 */
+    z13 = tmp7 - z3;
+
+    dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */
+    dataptr[DCTSIZE*3] = z13 - z2;
+    dataptr[DCTSIZE*1] = z11 + z4;
+    dataptr[DCTSIZE*7] = z11 - z4;
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+#endif /* DCT_IFAST_SUPPORTED */
diff --git a/jpeg-8d/jfdctint.c b/jpeg-8d/jfdctint.c
new file mode 100644
index 0000000..1dde58c
--- /dev/null
+++ b/jpeg-8d/jfdctint.c
@@ -0,0 +1,4348 @@
+/*
+ * jfdctint.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modification developed 2003-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a slow-but-accurate integer implementation of the
+ * forward DCT (Discrete Cosine Transform).
+ *
+ * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT
+ * on each column.  Direct algorithms are also available, but they are
+ * much more complex and seem not to be any faster when reduced to code.
+ *
+ * This implementation is based on an algorithm described in
+ *   C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT
+ *   Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics,
+ *   Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991.
+ * The primary algorithm described there uses 11 multiplies and 29 adds.
+ * We use their alternate method with 12 multiplies and 32 adds.
+ * The advantage of this method is that no data path contains more than one
+ * multiplication; this allows a very simple and accurate implementation in
+ * scaled fixed-point arithmetic, with a minimal number of shifts.
+ *
+ * We also provide FDCT routines with various input sample block sizes for
+ * direct resolution reduction or enlargement and for direct resolving the
+ * common 2x1 and 1x2 subsampling cases without additional resampling: NxN
+ * (N=1...16), 2NxN, and Nx2N (N=1...8) pixels for one 8x8 output DCT block.
+ *
+ * For N<8 we fill the remaining block coefficients with zero.
+ * For N>8 we apply a partial N-point FDCT on the input samples, computing
+ * just the lower 8 frequency coefficients and discarding the rest.
+ *
+ * We must scale the output coefficients of the N-point FDCT appropriately
+ * to the standard 8-point FDCT level by 8/N per 1-D pass.  This scaling
+ * is folded into the constant multipliers (pass 2) and/or final/initial
+ * shifting.
+ *
+ * CAUTION: We rely on the FIX() macro except for the N=1,2,4,8 cases
+ * since there would be too many additional constants to pre-calculate.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+#ifdef DCT_ISLOW_SUPPORTED
+
+
+/*
+ * This module is specialized to the case DCTSIZE = 8.
+ */
+
+#if DCTSIZE != 8
+  Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */
+#endif
+
+
+/*
+ * The poop on this scaling stuff is as follows:
+ *
+ * Each 1-D DCT step produces outputs which are a factor of sqrt(N)
+ * larger than the true DCT outputs.  The final outputs are therefore
+ * a factor of N larger than desired; since N=8 this can be cured by
+ * a simple right shift at the end of the algorithm.  The advantage of
+ * this arrangement is that we save two multiplications per 1-D DCT,
+ * because the y0 and y4 outputs need not be divided by sqrt(N).
+ * In the IJG code, this factor of 8 is removed by the quantization step
+ * (in jcdctmgr.c), NOT in this module.
+ *
+ * We have to do addition and subtraction of the integer inputs, which
+ * is no problem, and multiplication by fractional constants, which is
+ * a problem to do in integer arithmetic.  We multiply all the constants
+ * by CONST_SCALE and convert them to integer constants (thus retaining
+ * CONST_BITS bits of precision in the constants).  After doing a
+ * multiplication we have to divide the product by CONST_SCALE, with proper
+ * rounding, to produce the correct output.  This division can be done
+ * cheaply as a right shift of CONST_BITS bits.  We postpone shifting
+ * as long as possible so that partial sums can be added together with
+ * full fractional precision.
+ *
+ * The outputs of the first pass are scaled up by PASS1_BITS bits so that
+ * they are represented to better-than-integral precision.  These outputs
+ * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word
+ * with the recommended scaling.  (For 12-bit sample data, the intermediate
+ * array is INT32 anyway.)
+ *
+ * To avoid overflow of the 32-bit intermediate results in pass 2, we must
+ * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26.  Error analysis
+ * shows that the values given below are the most effective.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+#define CONST_BITS  13
+#define PASS1_BITS  2
+#else
+#define CONST_BITS  13
+#define PASS1_BITS  1		/* lose a little precision to avoid overflow */
+#endif
+
+/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
+ * causing a lot of useless floating-point operations at run time.
+ * To get around this we use the following pre-calculated constants.
+ * If you change CONST_BITS you may want to add appropriate values.
+ * (With a reasonable C compiler, you can just rely on the FIX() macro...)
+ */
+
+#if CONST_BITS == 13
+#define FIX_0_298631336  ((INT32)  2446)	/* FIX(0.298631336) */
+#define FIX_0_390180644  ((INT32)  3196)	/* FIX(0.390180644) */
+#define FIX_0_541196100  ((INT32)  4433)	/* FIX(0.541196100) */
+#define FIX_0_765366865  ((INT32)  6270)	/* FIX(0.765366865) */
+#define FIX_0_899976223  ((INT32)  7373)	/* FIX(0.899976223) */
+#define FIX_1_175875602  ((INT32)  9633)	/* FIX(1.175875602) */
+#define FIX_1_501321110  ((INT32)  12299)	/* FIX(1.501321110) */
+#define FIX_1_847759065  ((INT32)  15137)	/* FIX(1.847759065) */
+#define FIX_1_961570560  ((INT32)  16069)	/* FIX(1.961570560) */
+#define FIX_2_053119869  ((INT32)  16819)	/* FIX(2.053119869) */
+#define FIX_2_562915447  ((INT32)  20995)	/* FIX(2.562915447) */
+#define FIX_3_072711026  ((INT32)  25172)	/* FIX(3.072711026) */
+#else
+#define FIX_0_298631336  FIX(0.298631336)
+#define FIX_0_390180644  FIX(0.390180644)
+#define FIX_0_541196100  FIX(0.541196100)
+#define FIX_0_765366865  FIX(0.765366865)
+#define FIX_0_899976223  FIX(0.899976223)
+#define FIX_1_175875602  FIX(1.175875602)
+#define FIX_1_501321110  FIX(1.501321110)
+#define FIX_1_847759065  FIX(1.847759065)
+#define FIX_1_961570560  FIX(1.961570560)
+#define FIX_2_053119869  FIX(2.053119869)
+#define FIX_2_562915447  FIX(2.562915447)
+#define FIX_3_072711026  FIX(3.072711026)
+#endif
+
+
+/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result.
+ * For 8-bit samples with the recommended scaling, all the variable
+ * and constant values involved are no more than 16 bits wide, so a
+ * 16x16->32 bit multiply can be used instead of a full 32x32 multiply.
+ * For 12-bit samples, a full 32-bit multiplication will be needed.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+#define MULTIPLY(var,const)  MULTIPLY16C16(var,const)
+#else
+#define MULTIPLY(var,const)  ((var) * (const))
+#endif
+
+
+/*
+ * Perform the forward DCT on one block of samples.
+ */
+
+GLOBAL(void)
+jpeg_fdct_islow (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3;
+  INT32 tmp10, tmp11, tmp12, tmp13;
+  INT32 z1;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+
+  dataptr = data;
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part per LL&M figure 1 --- note that published figure is faulty;
+     * rotator "sqrt(2)*c1" should be "sqrt(2)*c6".
+     */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]);
+
+    tmp10 = tmp0 + tmp3;
+    tmp12 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp13 = tmp1 - tmp2;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]);
+    tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM) ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << PASS1_BITS);
+    dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS);
+
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS-PASS1_BITS-1);
+    dataptr[2] = (DCTELEM) RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865),
+				       CONST_BITS-PASS1_BITS);
+    dataptr[6] = (DCTELEM) RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065),
+				       CONST_BITS-PASS1_BITS);
+
+    /* Odd part per figure 8 --- note paper omits factor of sqrt(2).
+     * cK represents sqrt(2) * cos(K*pi/16).
+     * i0..i3 in the paper are tmp0..tmp3 here.
+     */
+
+    tmp10 = tmp0 + tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp0 + tmp2;
+    tmp13 = tmp1 + tmp3;
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /*  c3 */
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    tmp0  = MULTIPLY(tmp0,    FIX_1_501321110);    /*  c1+c3-c5-c7 */
+    tmp1  = MULTIPLY(tmp1,    FIX_3_072711026);    /*  c1+c3+c5-c7 */
+    tmp2  = MULTIPLY(tmp2,    FIX_2_053119869);    /*  c1+c3-c5+c7 */
+    tmp3  = MULTIPLY(tmp3,    FIX_0_298631336);    /* -c1+c3+c5-c7 */
+    tmp10 = MULTIPLY(tmp10, - FIX_0_899976223);    /*  c7-c3 */
+    tmp11 = MULTIPLY(tmp11, - FIX_2_562915447);    /* -c1-c3 */
+    tmp12 = MULTIPLY(tmp12, - FIX_0_390180644);    /*  c5-c3 */
+    tmp13 = MULTIPLY(tmp13, - FIX_1_961570560);    /* -c3-c5 */
+
+    tmp12 += z1;
+    tmp13 += z1;
+
+    dataptr[1] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS-PASS1_BITS);
+    dataptr[3] = (DCTELEM)
+      RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS-PASS1_BITS);
+    dataptr[5] = (DCTELEM)
+      RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS-PASS1_BITS);
+    dataptr[7] = (DCTELEM)
+      RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS-PASS1_BITS);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   */
+
+  dataptr = data;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part per LL&M figure 1 --- note that published figure is faulty;
+     * rotator "sqrt(2)*c1" should be "sqrt(2)*c6".
+     */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
+
+    /* Add fudge factor here for final descale. */
+    tmp10 = tmp0 + tmp3 + (ONE << (PASS1_BITS-1));
+    tmp12 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp13 = tmp1 - tmp2;
+
+    tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
+
+    dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp10 + tmp11, PASS1_BITS);
+    dataptr[DCTSIZE*4] = (DCTELEM) RIGHT_SHIFT(tmp10 - tmp11, PASS1_BITS);
+
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS+PASS1_BITS-1);
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), CONST_BITS+PASS1_BITS);
+
+    /* Odd part per figure 8 --- note paper omits factor of sqrt(2).
+     * cK represents sqrt(2) * cos(K*pi/16).
+     * i0..i3 in the paper are tmp0..tmp3 here.
+     */
+
+    tmp10 = tmp0 + tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp0 + tmp2;
+    tmp13 = tmp1 + tmp3;
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /*  c3 */
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS+PASS1_BITS-1);
+
+    tmp0  = MULTIPLY(tmp0,    FIX_1_501321110);    /*  c1+c3-c5-c7 */
+    tmp1  = MULTIPLY(tmp1,    FIX_3_072711026);    /*  c1+c3+c5-c7 */
+    tmp2  = MULTIPLY(tmp2,    FIX_2_053119869);    /*  c1+c3-c5+c7 */
+    tmp3  = MULTIPLY(tmp3,    FIX_0_298631336);    /* -c1+c3+c5-c7 */
+    tmp10 = MULTIPLY(tmp10, - FIX_0_899976223);    /*  c7-c3 */
+    tmp11 = MULTIPLY(tmp11, - FIX_2_562915447);    /* -c1-c3 */
+    tmp12 = MULTIPLY(tmp12, - FIX_0_390180644);    /*  c5-c3 */
+    tmp13 = MULTIPLY(tmp13, - FIX_1_961570560);    /* -c3-c5 */
+
+    tmp12 += z1;
+    tmp13 += z1;
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*5] = (DCTELEM)
+      RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*7] = (DCTELEM)
+      RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+#ifdef DCT_SCALING_SUPPORTED
+
+
+/*
+ * Perform the forward DCT on a 7x7 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_7x7 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3;
+  INT32 tmp10, tmp11, tmp12;
+  INT32 z1, z2, z3;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* cK represents sqrt(2) * cos(K*pi/14). */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 7; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[6]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[5]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[4]);
+    tmp3 = GETJSAMPLE(elemptr[3]);
+
+    tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[6]);
+    tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[5]);
+    tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[4]);
+
+    z1 = tmp0 + tmp2;
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((z1 + tmp1 + tmp3 - 7 * CENTERJSAMPLE) << PASS1_BITS);
+    tmp3 += tmp3;
+    z1 -= tmp3;
+    z1 -= tmp3;
+    z1 = MULTIPLY(z1, FIX(0.353553391));                /* (c2+c6-c4)/2 */
+    z2 = MULTIPLY(tmp0 - tmp2, FIX(0.920609002));       /* (c2+c4-c6)/2 */
+    z3 = MULTIPLY(tmp1 - tmp2, FIX(0.314692123));       /* c6 */
+    dataptr[2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS-PASS1_BITS);
+    z1 -= z2;
+    z2 = MULTIPLY(tmp0 - tmp1, FIX(0.881747734));       /* c4 */
+    dataptr[4] = (DCTELEM)
+      DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.707106781)), /* c2+c6-c4 */
+	      CONST_BITS-PASS1_BITS);
+    dataptr[6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS-PASS1_BITS);
+
+    /* Odd part */
+
+    tmp1 = MULTIPLY(tmp10 + tmp11, FIX(0.935414347));   /* (c3+c1-c5)/2 */
+    tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.170262339));   /* (c3+c5-c1)/2 */
+    tmp0 = tmp1 - tmp2;
+    tmp1 += tmp2;
+    tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.378756276)); /* -c1 */
+    tmp1 += tmp2;
+    tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.613604268));   /* c5 */
+    tmp0 += tmp3;
+    tmp2 += tmp3 + MULTIPLY(tmp12, FIX(1.870828693));   /* c3+c1-c5 */
+
+    dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS);
+    dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS);
+    dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/7)**2 = 64/49, which we fold
+   * into the constant multipliers:
+   * cK now represents sqrt(2) * cos(K*pi/14) * 64/49.
+   */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 7; ctr++) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*6];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*5];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*4];
+    tmp3 = dataptr[DCTSIZE*3];
+
+    tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*6];
+    tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*5];
+    tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*4];
+
+    z1 = tmp0 + tmp2;
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(z1 + tmp1 + tmp3, FIX(1.306122449)), /* 64/49 */
+	      CONST_BITS+PASS1_BITS);
+    tmp3 += tmp3;
+    z1 -= tmp3;
+    z1 -= tmp3;
+    z1 = MULTIPLY(z1, FIX(0.461784020));                /* (c2+c6-c4)/2 */
+    z2 = MULTIPLY(tmp0 - tmp2, FIX(1.202428084));       /* (c2+c4-c6)/2 */
+    z3 = MULTIPLY(tmp1 - tmp2, FIX(0.411026446));       /* c6 */
+    dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS+PASS1_BITS);
+    z1 -= z2;
+    z2 = MULTIPLY(tmp0 - tmp1, FIX(1.151670509));       /* c4 */
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.923568041)), /* c2+c6-c4 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+PASS1_BITS);
+
+    /* Odd part */
+
+    tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.221765677));   /* (c3+c1-c5)/2 */
+    tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.222383464));   /* (c3+c5-c1)/2 */
+    tmp0 = tmp1 - tmp2;
+    tmp1 += tmp2;
+    tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.800824523)); /* -c1 */
+    tmp1 += tmp2;
+    tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.801442310));   /* c5 */
+    tmp0 += tmp3;
+    tmp2 += tmp3 + MULTIPLY(tmp12, FIX(2.443531355));   /* c3+c1-c5 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 6x6 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_6x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2;
+  INT32 tmp10, tmp11, tmp12;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* cK represents sqrt(2) * cos(K*pi/12). */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 6; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]);
+    tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]);
+
+    tmp10 = tmp0 + tmp2;
+    tmp12 = tmp0 - tmp2;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << PASS1_BITS);
+    dataptr[2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp12, FIX(1.224744871)),                 /* c2 */
+	      CONST_BITS-PASS1_BITS);
+    dataptr[4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */
+	      CONST_BITS-PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)),     /* c5 */
+		    CONST_BITS-PASS1_BITS);
+
+    dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << PASS1_BITS));
+    dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << PASS1_BITS);
+    dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << PASS1_BITS));
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/6)**2 = 16/9, which we fold
+   * into the constant multipliers:
+   * cK now represents sqrt(2) * cos(K*pi/12) * 16/9.
+   */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 6; ctr++) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5];
+    tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3];
+
+    tmp10 = tmp0 + tmp2;
+    tmp12 = tmp0 - tmp2;
+
+    tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5];
+    tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4];
+    tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)),         /* 16/9 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp12, FIX(2.177324216)),                 /* c2 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */
+	      CONST_BITS+PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829));             /* c5 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)),   /* 16/9 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)),    /* 16/9 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*5] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)),   /* 16/9 */
+	      CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 5x5 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_5x5 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2;
+  INT32 tmp10, tmp11;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* We scale the results further by 2 as part of output adaption */
+  /* scaling for different DCT size. */
+  /* cK represents sqrt(2) * cos(K*pi/10). */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 5; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[4]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[3]);
+    tmp2 = GETJSAMPLE(elemptr[2]);
+
+    tmp10 = tmp0 + tmp1;
+    tmp11 = tmp0 - tmp1;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[4]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[3]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp10 + tmp2 - 5 * CENTERJSAMPLE) << (PASS1_BITS+1));
+    tmp11 = MULTIPLY(tmp11, FIX(0.790569415));          /* (c2+c4)/2 */
+    tmp10 -= tmp2 << 2;
+    tmp10 = MULTIPLY(tmp10, FIX(0.353553391));          /* (c2-c4)/2 */
+    dataptr[2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS-PASS1_BITS-1);
+    dataptr[4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS-PASS1_BITS-1);
+
+    /* Odd part */
+
+    tmp10 = MULTIPLY(tmp0 + tmp1, FIX(0.831253876));    /* c3 */
+
+    dataptr[1] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.513743148)), /* c1-c3 */
+	      CONST_BITS-PASS1_BITS-1);
+    dataptr[3] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.176250899)), /* c1+c3 */
+	      CONST_BITS-PASS1_BITS-1);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/5)**2 = 64/25, which we partially
+   * fold into the constant multipliers (other part was done in pass 1):
+   * cK now represents sqrt(2) * cos(K*pi/10) * 32/25.
+   */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 5; ctr++) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*4];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*3];
+    tmp2 = dataptr[DCTSIZE*2];
+
+    tmp10 = tmp0 + tmp1;
+    tmp11 = tmp0 - tmp1;
+
+    tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*4];
+    tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*3];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 + tmp2, FIX(1.28)),        /* 32/25 */
+	      CONST_BITS+PASS1_BITS);
+    tmp11 = MULTIPLY(tmp11, FIX(1.011928851));          /* (c2+c4)/2 */
+    tmp10 -= tmp2 << 2;
+    tmp10 = MULTIPLY(tmp10, FIX(0.452548340));          /* (c2-c4)/2 */
+    dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS+PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = MULTIPLY(tmp0 + tmp1, FIX(1.064004961));    /* c3 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.657591230)), /* c1-c3 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.785601151)), /* c1+c3 */
+	      CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 4x4 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_4x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1;
+  INT32 tmp10, tmp11;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* We must also scale the output by (8/4)**2 = 2**2, which we add here. */
+  /* cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 4; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]);
+
+    tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]);
+    tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+2));
+    dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+2));
+
+    /* Odd part */
+
+    tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100);       /* c6 */
+    /* Add fudge factor here for final descale. */
+    tmp0 += ONE << (CONST_BITS-PASS1_BITS-3);
+
+    dataptr[1] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */
+		  CONST_BITS-PASS1_BITS-2);
+    dataptr[3] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */
+		  CONST_BITS-PASS1_BITS-2);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 4; ctr++) {
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3] + (ONE << (PASS1_BITS-1));
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2];
+
+    tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3];
+    tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2];
+
+    dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS);
+    dataptr[DCTSIZE*2] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS);
+
+    /* Odd part */
+
+    tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100);       /* c6 */
+    /* Add fudge factor here for final descale. */
+    tmp0 += ONE << (CONST_BITS+PASS1_BITS-1);
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */
+		  CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */
+		  CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 3x3 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_3x3 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* We scale the results further by 2**2 as part of output adaption */
+  /* scaling for different DCT size. */
+  /* cK represents sqrt(2) * cos(K*pi/6). */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 3; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[2]);
+    tmp1 = GETJSAMPLE(elemptr[1]);
+
+    tmp2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[2]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp0 + tmp1 - 3 * CENTERJSAMPLE) << (PASS1_BITS+2));
+    dataptr[2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(0.707106781)), /* c2 */
+	      CONST_BITS-PASS1_BITS-2);
+
+    /* Odd part */
+
+    dataptr[1] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp2, FIX(1.224744871)),               /* c1 */
+	      CONST_BITS-PASS1_BITS-2);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/3)**2 = 64/9, which we partially
+   * fold into the constant multipliers (other part was done in pass 1):
+   * cK now represents sqrt(2) * cos(K*pi/6) * 16/9.
+   */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 3; ctr++) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*2];
+    tmp1 = dataptr[DCTSIZE*1];
+
+    tmp2 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*2];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 + tmp1, FIX(1.777777778)),        /* 16/9 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(1.257078722)), /* c2 */
+	      CONST_BITS+PASS1_BITS);
+
+    /* Odd part */
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp2, FIX(2.177324216)),               /* c1 */
+	      CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 2x2 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_2x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3;
+  JSAMPROW elemptr;
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT. */
+
+  /* Row 0 */
+  elemptr = sample_data[0] + start_col;
+
+  tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[1]);
+  tmp1 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[1]);
+
+  /* Row 1 */
+  elemptr = sample_data[1] + start_col;
+
+  tmp2 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[1]);
+  tmp3 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[1]);
+
+  /* Pass 2: process columns.
+   * We leave the results scaled up by an overall factor of 8.
+   * We must also scale the output by (8/2)**2 = 2**4.
+   */
+
+  /* Column 0 */
+  /* Apply unsigned->signed conversion */
+  data[DCTSIZE*0] = (DCTELEM) ((tmp0 + tmp2 - 4 * CENTERJSAMPLE) << 4);
+  data[DCTSIZE*1] = (DCTELEM) ((tmp0 - tmp2) << 4);
+
+  /* Column 1 */
+  data[DCTSIZE*0+1] = (DCTELEM) ((tmp1 + tmp3) << 4);
+  data[DCTSIZE*1+1] = (DCTELEM) ((tmp1 - tmp3) << 4);
+}
+
+
+/*
+ * Perform the forward DCT on a 1x1 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_1x1 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* We leave the result scaled up by an overall factor of 8. */
+  /* We must also scale the output by (8/1)**2 = 2**6. */
+  /* Apply unsigned->signed conversion */
+  data[0] = (DCTELEM)
+    ((GETJSAMPLE(sample_data[0][start_col]) - CENTERJSAMPLE) << 6);
+}
+
+
+/*
+ * Perform the forward DCT on a 9x9 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_9x9 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4;
+  INT32 tmp10, tmp11, tmp12, tmp13;
+  INT32 z1, z2;
+  DCTELEM workspace[8];
+  DCTELEM *dataptr;
+  DCTELEM *wsptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* we scale the results further by 2 as part of output adaption */
+  /* scaling for different DCT size. */
+  /* cK represents sqrt(2) * cos(K*pi/18). */
+
+  dataptr = data;
+  ctr = 0;
+  for (;;) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[8]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[7]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[6]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[5]);
+    tmp4 = GETJSAMPLE(elemptr[4]);
+
+    tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[8]);
+    tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[7]);
+    tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[6]);
+    tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[5]);
+
+    z1 = tmp0 + tmp2 + tmp3;
+    z2 = tmp1 + tmp4;
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM) ((z1 + z2 - 9 * CENTERJSAMPLE) << 1);
+    dataptr[6] = (DCTELEM)
+      DESCALE(MULTIPLY(z1 - z2 - z2, FIX(0.707106781)),  /* c6 */
+	      CONST_BITS-1);
+    z1 = MULTIPLY(tmp0 - tmp2, FIX(1.328926049));        /* c2 */
+    z2 = MULTIPLY(tmp1 - tmp4 - tmp4, FIX(0.707106781)); /* c6 */
+    dataptr[2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp2 - tmp3, FIX(1.083350441))    /* c4 */
+	      + z1 + z2, CONST_BITS-1);
+    dataptr[4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp3 - tmp0, FIX(0.245575608))    /* c8 */
+	      + z1 - z2, CONST_BITS-1);
+
+    /* Odd part */
+
+    dataptr[3] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp12 - tmp13, FIX(1.224744871)), /* c3 */
+	      CONST_BITS-1);
+
+    tmp11 = MULTIPLY(tmp11, FIX(1.224744871));        /* c3 */
+    tmp0 = MULTIPLY(tmp10 + tmp12, FIX(0.909038955)); /* c5 */
+    tmp1 = MULTIPLY(tmp10 + tmp13, FIX(0.483689525)); /* c7 */
+
+    dataptr[1] = (DCTELEM) DESCALE(tmp11 + tmp0 + tmp1, CONST_BITS-1);
+
+    tmp2 = MULTIPLY(tmp12 - tmp13, FIX(1.392728481)); /* c1 */
+
+    dataptr[5] = (DCTELEM) DESCALE(tmp0 - tmp11 - tmp2, CONST_BITS-1);
+    dataptr[7] = (DCTELEM) DESCALE(tmp1 - tmp11 + tmp2, CONST_BITS-1);
+
+    ctr++;
+
+    if (ctr != DCTSIZE) {
+      if (ctr == 9)
+	break;			/* Done. */
+      dataptr += DCTSIZE;	/* advance pointer to next row */
+    } else
+      dataptr = workspace;	/* switch pointer to extended workspace */
+  }
+
+  /* Pass 2: process columns.
+   * We leave the results scaled up by an overall factor of 8.
+   * We must also scale the output by (8/9)**2 = 64/81, which we partially
+   * fold into the constant multipliers and final/initial shifting:
+   * cK now represents sqrt(2) * cos(K*pi/18) * 128/81.
+   */
+
+  dataptr = data;
+  wsptr = workspace;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*0];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*7];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*6];
+    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*5];
+    tmp4 = dataptr[DCTSIZE*4];
+
+    tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*0];
+    tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*7];
+    tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*6];
+    tmp13 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*5];
+
+    z1 = tmp0 + tmp2 + tmp3;
+    z2 = tmp1 + tmp4;
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(z1 + z2, FIX(1.580246914)),       /* 128/81 */
+	      CONST_BITS+2);
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      DESCALE(MULTIPLY(z1 - z2 - z2, FIX(1.117403309)),  /* c6 */
+	      CONST_BITS+2);
+    z1 = MULTIPLY(tmp0 - tmp2, FIX(2.100031287));        /* c2 */
+    z2 = MULTIPLY(tmp1 - tmp4 - tmp4, FIX(1.117403309)); /* c6 */
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp2 - tmp3, FIX(1.711961190))    /* c4 */
+	      + z1 + z2, CONST_BITS+2);
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp3 - tmp0, FIX(0.388070096))    /* c8 */
+	      + z1 - z2, CONST_BITS+2);
+
+    /* Odd part */
+
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp12 - tmp13, FIX(1.935399303)), /* c3 */
+	      CONST_BITS+2);
+
+    tmp11 = MULTIPLY(tmp11, FIX(1.935399303));        /* c3 */
+    tmp0 = MULTIPLY(tmp10 + tmp12, FIX(1.436506004)); /* c5 */
+    tmp1 = MULTIPLY(tmp10 + tmp13, FIX(0.764348879)); /* c7 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      DESCALE(tmp11 + tmp0 + tmp1, CONST_BITS+2);
+
+    tmp2 = MULTIPLY(tmp12 - tmp13, FIX(2.200854883)); /* c1 */
+
+    dataptr[DCTSIZE*5] = (DCTELEM)
+      DESCALE(tmp0 - tmp11 - tmp2, CONST_BITS+2);
+    dataptr[DCTSIZE*7] = (DCTELEM)
+      DESCALE(tmp1 - tmp11 + tmp2, CONST_BITS+2);
+
+    dataptr++;			/* advance pointer to next column */
+    wsptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 10x10 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_10x10 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14;
+  DCTELEM workspace[8*2];
+  DCTELEM *dataptr;
+  DCTELEM *wsptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* we scale the results further by 2 as part of output adaption */
+  /* scaling for different DCT size. */
+  /* cK represents sqrt(2) * cos(K*pi/20). */
+
+  dataptr = data;
+  ctr = 0;
+  for (;;) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[9]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[8]);
+    tmp12 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[7]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[6]);
+    tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[5]);
+
+    tmp10 = tmp0 + tmp4;
+    tmp13 = tmp0 - tmp4;
+    tmp11 = tmp1 + tmp3;
+    tmp14 = tmp1 - tmp3;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[9]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[8]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[7]);
+    tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[6]);
+    tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[5]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp10 + tmp11 + tmp12 - 10 * CENTERJSAMPLE) << 1);
+    tmp12 += tmp12;
+    dataptr[4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.144122806)) - /* c4 */
+	      MULTIPLY(tmp11 - tmp12, FIX(0.437016024)),  /* c8 */
+	      CONST_BITS-1);
+    tmp10 = MULTIPLY(tmp13 + tmp14, FIX(0.831253876));    /* c6 */
+    dataptr[2] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.513743148)),  /* c2-c6 */
+	      CONST_BITS-1);
+    dataptr[6] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.176250899)),  /* c2+c6 */
+	      CONST_BITS-1);
+
+    /* Odd part */
+
+    tmp10 = tmp0 + tmp4;
+    tmp11 = tmp1 - tmp3;
+    dataptr[5] = (DCTELEM) ((tmp10 - tmp11 - tmp2) << 1);
+    tmp2 <<= CONST_BITS;
+    dataptr[1] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0, FIX(1.396802247)) +          /* c1 */
+	      MULTIPLY(tmp1, FIX(1.260073511)) + tmp2 +   /* c3 */
+	      MULTIPLY(tmp3, FIX(0.642039522)) +          /* c7 */
+	      MULTIPLY(tmp4, FIX(0.221231742)),           /* c9 */
+	      CONST_BITS-1);
+    tmp12 = MULTIPLY(tmp0 - tmp4, FIX(0.951056516)) -     /* (c3+c7)/2 */
+	    MULTIPLY(tmp1 + tmp3, FIX(0.587785252));      /* (c1-c9)/2 */
+    tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.309016994)) +   /* (c3-c7)/2 */
+	    (tmp11 << (CONST_BITS - 1)) - tmp2;
+    dataptr[3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS-1);
+    dataptr[7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS-1);
+
+    ctr++;
+
+    if (ctr != DCTSIZE) {
+      if (ctr == 10)
+	break;			/* Done. */
+      dataptr += DCTSIZE;	/* advance pointer to next row */
+    } else
+      dataptr = workspace;	/* switch pointer to extended workspace */
+  }
+
+  /* Pass 2: process columns.
+   * We leave the results scaled up by an overall factor of 8.
+   * We must also scale the output by (8/10)**2 = 16/25, which we partially
+   * fold into the constant multipliers and final/initial shifting:
+   * cK now represents sqrt(2) * cos(K*pi/20) * 32/25.
+   */
+
+  dataptr = data;
+  wsptr = workspace;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*1];
+    tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*0];
+    tmp12 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*7];
+    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*6];
+    tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5];
+
+    tmp10 = tmp0 + tmp4;
+    tmp13 = tmp0 - tmp4;
+    tmp11 = tmp1 + tmp3;
+    tmp14 = tmp1 - tmp3;
+
+    tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*1];
+    tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*0];
+    tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*7];
+    tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*6];
+    tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(1.28)), /* 32/25 */
+	      CONST_BITS+2);
+    tmp12 += tmp12;
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.464477191)) - /* c4 */
+	      MULTIPLY(tmp11 - tmp12, FIX(0.559380511)),  /* c8 */
+	      CONST_BITS+2);
+    tmp10 = MULTIPLY(tmp13 + tmp14, FIX(1.064004961));    /* c6 */
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.657591230)),  /* c2-c6 */
+	      CONST_BITS+2);
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.785601151)),  /* c2+c6 */
+	      CONST_BITS+2);
+
+    /* Odd part */
+
+    tmp10 = tmp0 + tmp4;
+    tmp11 = tmp1 - tmp3;
+    dataptr[DCTSIZE*5] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp11 - tmp2, FIX(1.28)),  /* 32/25 */
+	      CONST_BITS+2);
+    tmp2 = MULTIPLY(tmp2, FIX(1.28));                     /* 32/25 */
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0, FIX(1.787906876)) +          /* c1 */
+	      MULTIPLY(tmp1, FIX(1.612894094)) + tmp2 +   /* c3 */
+	      MULTIPLY(tmp3, FIX(0.821810588)) +          /* c7 */
+	      MULTIPLY(tmp4, FIX(0.283176630)),           /* c9 */
+	      CONST_BITS+2);
+    tmp12 = MULTIPLY(tmp0 - tmp4, FIX(1.217352341)) -     /* (c3+c7)/2 */
+	    MULTIPLY(tmp1 + tmp3, FIX(0.752365123));      /* (c1-c9)/2 */
+    tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.395541753)) +   /* (c3-c7)/2 */
+	    MULTIPLY(tmp11, FIX(0.64)) - tmp2;            /* 16/25 */
+    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS+2);
+    dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS+2);
+
+    dataptr++;			/* advance pointer to next column */
+    wsptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on an 11x11 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_11x11 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14;
+  INT32 z1, z2, z3;
+  DCTELEM workspace[8*3];
+  DCTELEM *dataptr;
+  DCTELEM *wsptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* we scale the results further by 2 as part of output adaption */
+  /* scaling for different DCT size. */
+  /* cK represents sqrt(2) * cos(K*pi/22). */
+
+  dataptr = data;
+  ctr = 0;
+  for (;;) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[10]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[9]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[8]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[7]);
+    tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[6]);
+    tmp5 = GETJSAMPLE(elemptr[5]);
+
+    tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[10]);
+    tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[9]);
+    tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[8]);
+    tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[7]);
+    tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[6]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 - 11 * CENTERJSAMPLE) << 1);
+    tmp5 += tmp5;
+    tmp0 -= tmp5;
+    tmp1 -= tmp5;
+    tmp2 -= tmp5;
+    tmp3 -= tmp5;
+    tmp4 -= tmp5;
+    z1 = MULTIPLY(tmp0 + tmp3, FIX(1.356927976)) +       /* c2 */
+	 MULTIPLY(tmp2 + tmp4, FIX(0.201263574));        /* c10 */
+    z2 = MULTIPLY(tmp1 - tmp3, FIX(0.926112931));        /* c6 */
+    z3 = MULTIPLY(tmp0 - tmp1, FIX(1.189712156));        /* c4 */
+    dataptr[2] = (DCTELEM)
+      DESCALE(z1 + z2 - MULTIPLY(tmp3, FIX(1.018300590)) /* c2+c8-c6 */
+	      - MULTIPLY(tmp4, FIX(1.390975730)),        /* c4+c10 */
+	      CONST_BITS-1);
+    dataptr[4] = (DCTELEM)
+      DESCALE(z2 + z3 + MULTIPLY(tmp1, FIX(0.062335650)) /* c4-c6-c10 */
+	      - MULTIPLY(tmp2, FIX(1.356927976))         /* c2 */
+	      + MULTIPLY(tmp4, FIX(0.587485545)),        /* c8 */
+	      CONST_BITS-1);
+    dataptr[6] = (DCTELEM)
+      DESCALE(z1 + z3 - MULTIPLY(tmp0, FIX(1.620527200)) /* c2+c4-c6 */
+	      - MULTIPLY(tmp2, FIX(0.788749120)),        /* c8+c10 */
+	      CONST_BITS-1);
+
+    /* Odd part */
+
+    tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.286413905));    /* c3 */
+    tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.068791298));    /* c5 */
+    tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.764581576));    /* c7 */
+    tmp0 = tmp1 + tmp2 + tmp3 - MULTIPLY(tmp10, FIX(1.719967871)) /* c7+c5+c3-c1 */
+	   + MULTIPLY(tmp14, FIX(0.398430003));          /* c9 */
+    tmp4 = MULTIPLY(tmp11 + tmp12, - FIX(0.764581576));  /* -c7 */
+    tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.399818907));  /* -c1 */
+    tmp1 += tmp4 + tmp5 + MULTIPLY(tmp11, FIX(1.276416582)) /* c9+c7+c1-c3 */
+	    - MULTIPLY(tmp14, FIX(1.068791298));         /* c5 */
+    tmp10 = MULTIPLY(tmp12 + tmp13, FIX(0.398430003));   /* c9 */
+    tmp2 += tmp4 + tmp10 - MULTIPLY(tmp12, FIX(1.989053629)) /* c9+c5+c3-c7 */
+	    + MULTIPLY(tmp14, FIX(1.399818907));         /* c1 */
+    tmp3 += tmp5 + tmp10 + MULTIPLY(tmp13, FIX(1.305598626)) /* c1+c5-c9-c7 */
+	    - MULTIPLY(tmp14, FIX(1.286413905));         /* c3 */
+
+    dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-1);
+    dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-1);
+    dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-1);
+    dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS-1);
+
+    ctr++;
+
+    if (ctr != DCTSIZE) {
+      if (ctr == 11)
+	break;			/* Done. */
+      dataptr += DCTSIZE;	/* advance pointer to next row */
+    } else
+      dataptr = workspace;	/* switch pointer to extended workspace */
+  }
+
+  /* Pass 2: process columns.
+   * We leave the results scaled up by an overall factor of 8.
+   * We must also scale the output by (8/11)**2 = 64/121, which we partially
+   * fold into the constant multipliers and final/initial shifting:
+   * cK now represents sqrt(2) * cos(K*pi/22) * 128/121.
+   */
+
+  dataptr = data;
+  wsptr = workspace;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*2];
+    tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*1];
+    tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*0];
+    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*7];
+    tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*6];
+    tmp5 = dataptr[DCTSIZE*5];
+
+    tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*2];
+    tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*1];
+    tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*0];
+    tmp13 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*7];
+    tmp14 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*6];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5,
+		       FIX(1.057851240)),                /* 128/121 */
+	      CONST_BITS+2);
+    tmp5 += tmp5;
+    tmp0 -= tmp5;
+    tmp1 -= tmp5;
+    tmp2 -= tmp5;
+    tmp3 -= tmp5;
+    tmp4 -= tmp5;
+    z1 = MULTIPLY(tmp0 + tmp3, FIX(1.435427942)) +       /* c2 */
+	 MULTIPLY(tmp2 + tmp4, FIX(0.212906922));        /* c10 */
+    z2 = MULTIPLY(tmp1 - tmp3, FIX(0.979689713));        /* c6 */
+    z3 = MULTIPLY(tmp0 - tmp1, FIX(1.258538479));        /* c4 */
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(z1 + z2 - MULTIPLY(tmp3, FIX(1.077210542)) /* c2+c8-c6 */
+	      - MULTIPLY(tmp4, FIX(1.471445400)),        /* c4+c10 */
+	      CONST_BITS+2);
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(z2 + z3 + MULTIPLY(tmp1, FIX(0.065941844)) /* c4-c6-c10 */
+	      - MULTIPLY(tmp2, FIX(1.435427942))         /* c2 */
+	      + MULTIPLY(tmp4, FIX(0.621472312)),        /* c8 */
+	      CONST_BITS+2);
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      DESCALE(z1 + z3 - MULTIPLY(tmp0, FIX(1.714276708)) /* c2+c4-c6 */
+	      - MULTIPLY(tmp2, FIX(0.834379234)),        /* c8+c10 */
+	      CONST_BITS+2);
+
+    /* Odd part */
+
+    tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.360834544));    /* c3 */
+    tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.130622199));    /* c5 */
+    tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.808813568));    /* c7 */
+    tmp0 = tmp1 + tmp2 + tmp3 - MULTIPLY(tmp10, FIX(1.819470145)) /* c7+c5+c3-c1 */
+	   + MULTIPLY(tmp14, FIX(0.421479672));          /* c9 */
+    tmp4 = MULTIPLY(tmp11 + tmp12, - FIX(0.808813568));  /* -c7 */
+    tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.480800167));  /* -c1 */
+    tmp1 += tmp4 + tmp5 + MULTIPLY(tmp11, FIX(1.350258864)) /* c9+c7+c1-c3 */
+	    - MULTIPLY(tmp14, FIX(1.130622199));         /* c5 */
+    tmp10 = MULTIPLY(tmp12 + tmp13, FIX(0.421479672));   /* c9 */
+    tmp2 += tmp4 + tmp10 - MULTIPLY(tmp12, FIX(2.104122847)) /* c9+c5+c3-c7 */
+	    + MULTIPLY(tmp14, FIX(1.480800167));         /* c1 */
+    tmp3 += tmp5 + tmp10 + MULTIPLY(tmp13, FIX(1.381129125)) /* c1+c5-c9-c7 */
+	    - MULTIPLY(tmp14, FIX(1.360834544));         /* c3 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+2);
+    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+2);
+    dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+2);
+    dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+2);
+
+    dataptr++;			/* advance pointer to next column */
+    wsptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 12x12 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_12x12 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15;
+  DCTELEM workspace[8*4];
+  DCTELEM *dataptr;
+  DCTELEM *wsptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT. */
+  /* cK represents sqrt(2) * cos(K*pi/24). */
+
+  dataptr = data;
+  ctr = 0;
+  for (;;) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[11]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[10]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[9]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[8]);
+    tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[7]);
+    tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[6]);
+
+    tmp10 = tmp0 + tmp5;
+    tmp13 = tmp0 - tmp5;
+    tmp11 = tmp1 + tmp4;
+    tmp14 = tmp1 - tmp4;
+    tmp12 = tmp2 + tmp3;
+    tmp15 = tmp2 - tmp3;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[11]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[10]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[9]);
+    tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[8]);
+    tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[7]);
+    tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[6]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM) (tmp10 + tmp11 + tmp12 - 12 * CENTERJSAMPLE);
+    dataptr[6] = (DCTELEM) (tmp13 - tmp14 - tmp15);
+    dataptr[4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.224744871)), /* c4 */
+	      CONST_BITS);
+    dataptr[2] = (DCTELEM)
+      DESCALE(tmp14 - tmp15 + MULTIPLY(tmp13 + tmp15, FIX(1.366025404)), /* c2 */
+	      CONST_BITS);
+
+    /* Odd part */
+
+    tmp10 = MULTIPLY(tmp1 + tmp4, FIX_0_541196100);    /* c9 */
+    tmp14 = tmp10 + MULTIPLY(tmp1, FIX_0_765366865);   /* c3-c9 */
+    tmp15 = tmp10 - MULTIPLY(tmp4, FIX_1_847759065);   /* c3+c9 */
+    tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.121971054));   /* c5 */
+    tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.860918669));   /* c7 */
+    tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.580774953)) /* c5+c7-c1 */
+	    + MULTIPLY(tmp5, FIX(0.184591911));        /* c11 */
+    tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.184591911)); /* -c11 */
+    tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.339493912)) /* c1+c5-c11 */
+	    + MULTIPLY(tmp5, FIX(0.860918669));        /* c7 */
+    tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.725788011)) /* c1+c11-c7 */
+	    - MULTIPLY(tmp5, FIX(1.121971054));        /* c5 */
+    tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.306562965)) /* c3 */
+	    - MULTIPLY(tmp2 + tmp5, FIX_0_541196100);  /* c9 */
+
+    dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS);
+    dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS);
+    dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS);
+    dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS);
+
+    ctr++;
+
+    if (ctr != DCTSIZE) {
+      if (ctr == 12)
+	break;			/* Done. */
+      dataptr += DCTSIZE;	/* advance pointer to next row */
+    } else
+      dataptr = workspace;	/* switch pointer to extended workspace */
+  }
+
+  /* Pass 2: process columns.
+   * We leave the results scaled up by an overall factor of 8.
+   * We must also scale the output by (8/12)**2 = 4/9, which we partially
+   * fold into the constant multipliers and final shifting:
+   * cK now represents sqrt(2) * cos(K*pi/24) * 8/9.
+   */
+
+  dataptr = data;
+  wsptr = workspace;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*3];
+    tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*2];
+    tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*1];
+    tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*0];
+    tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*7];
+    tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*6];
+
+    tmp10 = tmp0 + tmp5;
+    tmp13 = tmp0 - tmp5;
+    tmp11 = tmp1 + tmp4;
+    tmp14 = tmp1 - tmp4;
+    tmp12 = tmp2 + tmp3;
+    tmp15 = tmp2 - tmp3;
+
+    tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*3];
+    tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*2];
+    tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*1];
+    tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*0];
+    tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*7];
+    tmp5 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*6];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(0.888888889)), /* 8/9 */
+	      CONST_BITS+1);
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp13 - tmp14 - tmp15, FIX(0.888888889)), /* 8/9 */
+	      CONST_BITS+1);
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.088662108)),         /* c4 */
+	      CONST_BITS+1);
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp14 - tmp15, FIX(0.888888889)) +        /* 8/9 */
+	      MULTIPLY(tmp13 + tmp15, FIX(1.214244803)),         /* c2 */
+	      CONST_BITS+1);
+
+    /* Odd part */
+
+    tmp10 = MULTIPLY(tmp1 + tmp4, FIX(0.481063200));   /* c9 */
+    tmp14 = tmp10 + MULTIPLY(tmp1, FIX(0.680326102));  /* c3-c9 */
+    tmp15 = tmp10 - MULTIPLY(tmp4, FIX(1.642452502));  /* c3+c9 */
+    tmp12 = MULTIPLY(tmp0 + tmp2, FIX(0.997307603));   /* c5 */
+    tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.765261039));   /* c7 */
+    tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.516244403)) /* c5+c7-c1 */
+	    + MULTIPLY(tmp5, FIX(0.164081699));        /* c11 */
+    tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.164081699)); /* -c11 */
+    tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.079550144)) /* c1+c5-c11 */
+	    + MULTIPLY(tmp5, FIX(0.765261039));        /* c7 */
+    tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.645144899)) /* c1+c11-c7 */
+	    - MULTIPLY(tmp5, FIX(0.997307603));        /* c5 */
+    tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.161389302)) /* c3 */
+	    - MULTIPLY(tmp2 + tmp5, FIX(0.481063200)); /* c9 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+1);
+    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+1);
+    dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+1);
+    dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+1);
+
+    dataptr++;			/* advance pointer to next column */
+    wsptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 13x13 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_13x13 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15;
+  INT32 z1, z2;
+  DCTELEM workspace[8*5];
+  DCTELEM *dataptr;
+  DCTELEM *wsptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT. */
+  /* cK represents sqrt(2) * cos(K*pi/26). */
+
+  dataptr = data;
+  ctr = 0;
+  for (;;) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[12]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[11]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[10]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[9]);
+    tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[8]);
+    tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[7]);
+    tmp6 = GETJSAMPLE(elemptr[6]);
+
+    tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[12]);
+    tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[11]);
+    tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[10]);
+    tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[9]);
+    tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[8]);
+    tmp15 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[7]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      (tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 + tmp6 - 13 * CENTERJSAMPLE);
+    tmp6 += tmp6;
+    tmp0 -= tmp6;
+    tmp1 -= tmp6;
+    tmp2 -= tmp6;
+    tmp3 -= tmp6;
+    tmp4 -= tmp6;
+    tmp5 -= tmp6;
+    dataptr[2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0, FIX(1.373119086)) +   /* c2 */
+	      MULTIPLY(tmp1, FIX(1.058554052)) +   /* c6 */
+	      MULTIPLY(tmp2, FIX(0.501487041)) -   /* c10 */
+	      MULTIPLY(tmp3, FIX(0.170464608)) -   /* c12 */
+	      MULTIPLY(tmp4, FIX(0.803364869)) -   /* c8 */
+	      MULTIPLY(tmp5, FIX(1.252223920)),    /* c4 */
+	      CONST_BITS);
+    z1 = MULTIPLY(tmp0 - tmp2, FIX(1.155388986)) - /* (c4+c6)/2 */
+	 MULTIPLY(tmp3 - tmp4, FIX(0.435816023)) - /* (c2-c10)/2 */
+	 MULTIPLY(tmp1 - tmp5, FIX(0.316450131));  /* (c8-c12)/2 */
+    z2 = MULTIPLY(tmp0 + tmp2, FIX(0.096834934)) - /* (c4-c6)/2 */
+	 MULTIPLY(tmp3 + tmp4, FIX(0.937303064)) + /* (c2+c10)/2 */
+	 MULTIPLY(tmp1 + tmp5, FIX(0.486914739));  /* (c8+c12)/2 */
+
+    dataptr[4] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS);
+    dataptr[6] = (DCTELEM) DESCALE(z1 - z2, CONST_BITS);
+
+    /* Odd part */
+
+    tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.322312651));   /* c3 */
+    tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.163874945));   /* c5 */
+    tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.937797057)) +  /* c7 */
+	   MULTIPLY(tmp14 + tmp15, FIX(0.338443458));   /* c11 */
+    tmp0 = tmp1 + tmp2 + tmp3 -
+	   MULTIPLY(tmp10, FIX(2.020082300)) +          /* c3+c5+c7-c1 */
+	   MULTIPLY(tmp14, FIX(0.318774355));           /* c9-c11 */
+    tmp4 = MULTIPLY(tmp14 - tmp15, FIX(0.937797057)) -  /* c7 */
+	   MULTIPLY(tmp11 + tmp12, FIX(0.338443458));   /* c11 */
+    tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.163874945)); /* -c5 */
+    tmp1 += tmp4 + tmp5 +
+	    MULTIPLY(tmp11, FIX(0.837223564)) -         /* c5+c9+c11-c3 */
+	    MULTIPLY(tmp14, FIX(2.341699410));          /* c1+c7 */
+    tmp6 = MULTIPLY(tmp12 + tmp13, - FIX(0.657217813)); /* -c9 */
+    tmp2 += tmp4 + tmp6 -
+	    MULTIPLY(tmp12, FIX(1.572116027)) +         /* c1+c5-c9-c11 */
+	    MULTIPLY(tmp15, FIX(2.260109708));          /* c3+c7 */
+    tmp3 += tmp5 + tmp6 +
+	    MULTIPLY(tmp13, FIX(2.205608352)) -         /* c3+c5+c9-c7 */
+	    MULTIPLY(tmp15, FIX(1.742345811));          /* c1+c11 */
+
+    dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS);
+    dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS);
+    dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS);
+    dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS);
+
+    ctr++;
+
+    if (ctr != DCTSIZE) {
+      if (ctr == 13)
+	break;			/* Done. */
+      dataptr += DCTSIZE;	/* advance pointer to next row */
+    } else
+      dataptr = workspace;	/* switch pointer to extended workspace */
+  }
+
+  /* Pass 2: process columns.
+   * We leave the results scaled up by an overall factor of 8.
+   * We must also scale the output by (8/13)**2 = 64/169, which we partially
+   * fold into the constant multipliers and final shifting:
+   * cK now represents sqrt(2) * cos(K*pi/26) * 128/169.
+   */
+
+  dataptr = data;
+  wsptr = workspace;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*4];
+    tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*3];
+    tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*2];
+    tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*1];
+    tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*0];
+    tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*7];
+    tmp6 = dataptr[DCTSIZE*6];
+
+    tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*4];
+    tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*3];
+    tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*2];
+    tmp13 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*1];
+    tmp14 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*0];
+    tmp15 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*7];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 + tmp6,
+		       FIX(0.757396450)),          /* 128/169 */
+	      CONST_BITS+1);
+    tmp6 += tmp6;
+    tmp0 -= tmp6;
+    tmp1 -= tmp6;
+    tmp2 -= tmp6;
+    tmp3 -= tmp6;
+    tmp4 -= tmp6;
+    tmp5 -= tmp6;
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0, FIX(1.039995521)) +   /* c2 */
+	      MULTIPLY(tmp1, FIX(0.801745081)) +   /* c6 */
+	      MULTIPLY(tmp2, FIX(0.379824504)) -   /* c10 */
+	      MULTIPLY(tmp3, FIX(0.129109289)) -   /* c12 */
+	      MULTIPLY(tmp4, FIX(0.608465700)) -   /* c8 */
+	      MULTIPLY(tmp5, FIX(0.948429952)),    /* c4 */
+	      CONST_BITS+1);
+    z1 = MULTIPLY(tmp0 - tmp2, FIX(0.875087516)) - /* (c4+c6)/2 */
+	 MULTIPLY(tmp3 - tmp4, FIX(0.330085509)) - /* (c2-c10)/2 */
+	 MULTIPLY(tmp1 - tmp5, FIX(0.239678205));  /* (c8-c12)/2 */
+    z2 = MULTIPLY(tmp0 + tmp2, FIX(0.073342435)) - /* (c4-c6)/2 */
+	 MULTIPLY(tmp3 + tmp4, FIX(0.709910013)) + /* (c2+c10)/2 */
+	 MULTIPLY(tmp1 + tmp5, FIX(0.368787494));  /* (c8+c12)/2 */
+
+    dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+1);
+    dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 - z2, CONST_BITS+1);
+
+    /* Odd part */
+
+    tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.001514908));   /* c3 */
+    tmp2 = MULTIPLY(tmp10 + tmp12, FIX(0.881514751));   /* c5 */
+    tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.710284161)) +  /* c7 */
+	   MULTIPLY(tmp14 + tmp15, FIX(0.256335874));   /* c11 */
+    tmp0 = tmp1 + tmp2 + tmp3 -
+	   MULTIPLY(tmp10, FIX(1.530003162)) +          /* c3+c5+c7-c1 */
+	   MULTIPLY(tmp14, FIX(0.241438564));           /* c9-c11 */
+    tmp4 = MULTIPLY(tmp14 - tmp15, FIX(0.710284161)) -  /* c7 */
+	   MULTIPLY(tmp11 + tmp12, FIX(0.256335874));   /* c11 */
+    tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(0.881514751)); /* -c5 */
+    tmp1 += tmp4 + tmp5 +
+	    MULTIPLY(tmp11, FIX(0.634110155)) -         /* c5+c9+c11-c3 */
+	    MULTIPLY(tmp14, FIX(1.773594819));          /* c1+c7 */
+    tmp6 = MULTIPLY(tmp12 + tmp13, - FIX(0.497774438)); /* -c9 */
+    tmp2 += tmp4 + tmp6 -
+	    MULTIPLY(tmp12, FIX(1.190715098)) +         /* c1+c5-c9-c11 */
+	    MULTIPLY(tmp15, FIX(1.711799069));          /* c3+c7 */
+    tmp3 += tmp5 + tmp6 +
+	    MULTIPLY(tmp13, FIX(1.670519935)) -         /* c3+c5+c9-c7 */
+	    MULTIPLY(tmp15, FIX(1.319646532));          /* c1+c11 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+1);
+    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+1);
+    dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+1);
+    dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+1);
+
+    dataptr++;			/* advance pointer to next column */
+    wsptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 14x14 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_14x14 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16;
+  DCTELEM workspace[8*6];
+  DCTELEM *dataptr;
+  DCTELEM *wsptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT. */
+  /* cK represents sqrt(2) * cos(K*pi/28). */
+
+  dataptr = data;
+  ctr = 0;
+  for (;;) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[13]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[12]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[11]);
+    tmp13 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[10]);
+    tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[9]);
+    tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[8]);
+    tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[7]);
+
+    tmp10 = tmp0 + tmp6;
+    tmp14 = tmp0 - tmp6;
+    tmp11 = tmp1 + tmp5;
+    tmp15 = tmp1 - tmp5;
+    tmp12 = tmp2 + tmp4;
+    tmp16 = tmp2 - tmp4;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[13]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[12]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[11]);
+    tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[10]);
+    tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[9]);
+    tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[8]);
+    tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[7]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      (tmp10 + tmp11 + tmp12 + tmp13 - 14 * CENTERJSAMPLE);
+    tmp13 += tmp13;
+    dataptr[4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.274162392)) + /* c4 */
+	      MULTIPLY(tmp11 - tmp13, FIX(0.314692123)) - /* c12 */
+	      MULTIPLY(tmp12 - tmp13, FIX(0.881747734)),  /* c8 */
+	      CONST_BITS);
+
+    tmp10 = MULTIPLY(tmp14 + tmp15, FIX(1.105676686));    /* c6 */
+
+    dataptr[2] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.273079590))   /* c2-c6 */
+	      + MULTIPLY(tmp16, FIX(0.613604268)),        /* c10 */
+	      CONST_BITS);
+    dataptr[6] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.719280954))   /* c6+c10 */
+	      - MULTIPLY(tmp16, FIX(1.378756276)),        /* c2 */
+	      CONST_BITS);
+
+    /* Odd part */
+
+    tmp10 = tmp1 + tmp2;
+    tmp11 = tmp5 - tmp4;
+    dataptr[7] = (DCTELEM) (tmp0 - tmp10 + tmp3 - tmp11 - tmp6);
+    tmp3 <<= CONST_BITS;
+    tmp10 = MULTIPLY(tmp10, - FIX(0.158341681));          /* -c13 */
+    tmp11 = MULTIPLY(tmp11, FIX(1.405321284));            /* c1 */
+    tmp10 += tmp11 - tmp3;
+    tmp11 = MULTIPLY(tmp0 + tmp2, FIX(1.197448846)) +     /* c5 */
+	    MULTIPLY(tmp4 + tmp6, FIX(0.752406978));      /* c9 */
+    dataptr[5] = (DCTELEM)
+      DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(2.373959773)) /* c3+c5-c13 */
+	      + MULTIPLY(tmp4, FIX(1.119999435)),         /* c1+c11-c9 */
+	      CONST_BITS);
+    tmp12 = MULTIPLY(tmp0 + tmp1, FIX(1.334852607)) +     /* c3 */
+	    MULTIPLY(tmp5 - tmp6, FIX(0.467085129));      /* c11 */
+    dataptr[3] = (DCTELEM)
+      DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.424103948)) /* c3-c9-c13 */
+	      - MULTIPLY(tmp5, FIX(3.069855259)),         /* c1+c5+c11 */
+	      CONST_BITS);
+    dataptr[1] = (DCTELEM)
+      DESCALE(tmp11 + tmp12 + tmp3 + tmp6 -
+	      MULTIPLY(tmp0 + tmp6, FIX(1.126980169)),    /* c3+c5-c1 */
+	      CONST_BITS);
+
+    ctr++;
+
+    if (ctr != DCTSIZE) {
+      if (ctr == 14)
+	break;			/* Done. */
+      dataptr += DCTSIZE;	/* advance pointer to next row */
+    } else
+      dataptr = workspace;	/* switch pointer to extended workspace */
+  }
+
+  /* Pass 2: process columns.
+   * We leave the results scaled up by an overall factor of 8.
+   * We must also scale the output by (8/14)**2 = 16/49, which we partially
+   * fold into the constant multipliers and final shifting:
+   * cK now represents sqrt(2) * cos(K*pi/28) * 32/49.
+   */
+
+  dataptr = data;
+  wsptr = workspace;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*5];
+    tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*4];
+    tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*3];
+    tmp13 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*2];
+    tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*1];
+    tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*0];
+    tmp6 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7];
+
+    tmp10 = tmp0 + tmp6;
+    tmp14 = tmp0 - tmp6;
+    tmp11 = tmp1 + tmp5;
+    tmp15 = tmp1 - tmp5;
+    tmp12 = tmp2 + tmp4;
+    tmp16 = tmp2 - tmp4;
+
+    tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*5];
+    tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*4];
+    tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*3];
+    tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*2];
+    tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*1];
+    tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*0];
+    tmp6 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12 + tmp13,
+		       FIX(0.653061224)),                 /* 32/49 */
+	      CONST_BITS+1);
+    tmp13 += tmp13;
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp13, FIX(0.832106052)) + /* c4 */
+	      MULTIPLY(tmp11 - tmp13, FIX(0.205513223)) - /* c12 */
+	      MULTIPLY(tmp12 - tmp13, FIX(0.575835255)),  /* c8 */
+	      CONST_BITS+1);
+
+    tmp10 = MULTIPLY(tmp14 + tmp15, FIX(0.722074570));    /* c6 */
+
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.178337691))   /* c2-c6 */
+	      + MULTIPLY(tmp16, FIX(0.400721155)),        /* c10 */
+	      CONST_BITS+1);
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.122795725))   /* c6+c10 */
+	      - MULTIPLY(tmp16, FIX(0.900412262)),        /* c2 */
+	      CONST_BITS+1);
+
+    /* Odd part */
+
+    tmp10 = tmp1 + tmp2;
+    tmp11 = tmp5 - tmp4;
+    dataptr[DCTSIZE*7] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 - tmp10 + tmp3 - tmp11 - tmp6,
+		       FIX(0.653061224)),                 /* 32/49 */
+	      CONST_BITS+1);
+    tmp3  = MULTIPLY(tmp3 , FIX(0.653061224));            /* 32/49 */
+    tmp10 = MULTIPLY(tmp10, - FIX(0.103406812));          /* -c13 */
+    tmp11 = MULTIPLY(tmp11, FIX(0.917760839));            /* c1 */
+    tmp10 += tmp11 - tmp3;
+    tmp11 = MULTIPLY(tmp0 + tmp2, FIX(0.782007410)) +     /* c5 */
+	    MULTIPLY(tmp4 + tmp6, FIX(0.491367823));      /* c9 */
+    dataptr[DCTSIZE*5] = (DCTELEM)
+      DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(1.550341076)) /* c3+c5-c13 */
+	      + MULTIPLY(tmp4, FIX(0.731428202)),         /* c1+c11-c9 */
+	      CONST_BITS+1);
+    tmp12 = MULTIPLY(tmp0 + tmp1, FIX(0.871740478)) +     /* c3 */
+	    MULTIPLY(tmp5 - tmp6, FIX(0.305035186));      /* c11 */
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.276965844)) /* c3-c9-c13 */
+	      - MULTIPLY(tmp5, FIX(2.004803435)),         /* c1+c5+c11 */
+	      CONST_BITS+1);
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      DESCALE(tmp11 + tmp12 + tmp3
+	      - MULTIPLY(tmp0, FIX(0.735987049))          /* c3+c5-c1 */
+	      - MULTIPLY(tmp6, FIX(0.082925825)),         /* c9-c11-c13 */
+	      CONST_BITS+1);
+
+    dataptr++;			/* advance pointer to next column */
+    wsptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 15x15 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_15x15 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16;
+  INT32 z1, z2, z3;
+  DCTELEM workspace[8*7];
+  DCTELEM *dataptr;
+  DCTELEM *wsptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT. */
+  /* cK represents sqrt(2) * cos(K*pi/30). */
+
+  dataptr = data;
+  ctr = 0;
+  for (;;) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[14]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[13]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[12]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[11]);
+    tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[10]);
+    tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[9]);
+    tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[8]);
+    tmp7 = GETJSAMPLE(elemptr[7]);
+
+    tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[14]);
+    tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[13]);
+    tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[12]);
+    tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[11]);
+    tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[10]);
+    tmp15 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[9]);
+    tmp16 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[8]);
+
+    z1 = tmp0 + tmp4 + tmp5;
+    z2 = tmp1 + tmp3 + tmp6;
+    z3 = tmp2 + tmp7;
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM) (z1 + z2 + z3 - 15 * CENTERJSAMPLE);
+    z3 += z3;
+    dataptr[6] = (DCTELEM)
+      DESCALE(MULTIPLY(z1 - z3, FIX(1.144122806)) - /* c6 */
+	      MULTIPLY(z2 - z3, FIX(0.437016024)),  /* c12 */
+	      CONST_BITS);
+    tmp2 += ((tmp1 + tmp4) >> 1) - tmp7 - tmp7;
+    z1 = MULTIPLY(tmp3 - tmp2, FIX(1.531135173)) -  /* c2+c14 */
+         MULTIPLY(tmp6 - tmp2, FIX(2.238241955));   /* c4+c8 */
+    z2 = MULTIPLY(tmp5 - tmp2, FIX(0.798468008)) -  /* c8-c14 */
+	 MULTIPLY(tmp0 - tmp2, FIX(0.091361227));   /* c2-c4 */
+    z3 = MULTIPLY(tmp0 - tmp3, FIX(1.383309603)) +  /* c2 */
+	 MULTIPLY(tmp6 - tmp5, FIX(0.946293579)) +  /* c8 */
+	 MULTIPLY(tmp1 - tmp4, FIX(0.790569415));   /* (c6+c12)/2 */
+
+    dataptr[2] = (DCTELEM) DESCALE(z1 + z3, CONST_BITS);
+    dataptr[4] = (DCTELEM) DESCALE(z2 + z3, CONST_BITS);
+
+    /* Odd part */
+
+    tmp2 = MULTIPLY(tmp10 - tmp12 - tmp13 + tmp15 + tmp16,
+		    FIX(1.224744871));                         /* c5 */
+    tmp1 = MULTIPLY(tmp10 - tmp14 - tmp15, FIX(1.344997024)) + /* c3 */
+	   MULTIPLY(tmp11 - tmp13 - tmp16, FIX(0.831253876));  /* c9 */
+    tmp12 = MULTIPLY(tmp12, FIX(1.224744871));                 /* c5 */
+    tmp4 = MULTIPLY(tmp10 - tmp16, FIX(1.406466353)) +         /* c1 */
+	   MULTIPLY(tmp11 + tmp14, FIX(1.344997024)) +         /* c3 */
+	   MULTIPLY(tmp13 + tmp15, FIX(0.575212477));          /* c11 */
+    tmp0 = MULTIPLY(tmp13, FIX(0.475753014)) -                 /* c7-c11 */
+	   MULTIPLY(tmp14, FIX(0.513743148)) +                 /* c3-c9 */
+	   MULTIPLY(tmp16, FIX(1.700497885)) + tmp4 + tmp12;   /* c1+c13 */
+    tmp3 = MULTIPLY(tmp10, - FIX(0.355500862)) -               /* -(c1-c7) */
+	   MULTIPLY(tmp11, FIX(2.176250899)) -                 /* c3+c9 */
+	   MULTIPLY(tmp15, FIX(0.869244010)) + tmp4 - tmp12;   /* c11+c13 */
+
+    dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS);
+    dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS);
+    dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS);
+    dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS);
+
+    ctr++;
+
+    if (ctr != DCTSIZE) {
+      if (ctr == 15)
+	break;			/* Done. */
+      dataptr += DCTSIZE;	/* advance pointer to next row */
+    } else
+      dataptr = workspace;	/* switch pointer to extended workspace */
+  }
+
+  /* Pass 2: process columns.
+   * We leave the results scaled up by an overall factor of 8.
+   * We must also scale the output by (8/15)**2 = 64/225, which we partially
+   * fold into the constant multipliers and final shifting:
+   * cK now represents sqrt(2) * cos(K*pi/30) * 256/225.
+   */
+
+  dataptr = data;
+  wsptr = workspace;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*6];
+    tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*5];
+    tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*4];
+    tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*3];
+    tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*2];
+    tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*1];
+    tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*0];
+    tmp7 = dataptr[DCTSIZE*7];
+
+    tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*6];
+    tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*5];
+    tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*4];
+    tmp13 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*3];
+    tmp14 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*2];
+    tmp15 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*1];
+    tmp16 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*0];
+
+    z1 = tmp0 + tmp4 + tmp5;
+    z2 = tmp1 + tmp3 + tmp6;
+    z3 = tmp2 + tmp7;
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(z1 + z2 + z3, FIX(1.137777778)), /* 256/225 */
+	      CONST_BITS+2);
+    z3 += z3;
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      DESCALE(MULTIPLY(z1 - z3, FIX(1.301757503)) - /* c6 */
+	      MULTIPLY(z2 - z3, FIX(0.497227121)),  /* c12 */
+	      CONST_BITS+2);
+    tmp2 += ((tmp1 + tmp4) >> 1) - tmp7 - tmp7;
+    z1 = MULTIPLY(tmp3 - tmp2, FIX(1.742091575)) -  /* c2+c14 */
+         MULTIPLY(tmp6 - tmp2, FIX(2.546621957));   /* c4+c8 */
+    z2 = MULTIPLY(tmp5 - tmp2, FIX(0.908479156)) -  /* c8-c14 */
+	 MULTIPLY(tmp0 - tmp2, FIX(0.103948774));   /* c2-c4 */
+    z3 = MULTIPLY(tmp0 - tmp3, FIX(1.573898926)) +  /* c2 */
+	 MULTIPLY(tmp6 - tmp5, FIX(1.076671805)) +  /* c8 */
+	 MULTIPLY(tmp1 - tmp4, FIX(0.899492312));   /* (c6+c12)/2 */
+
+    dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z3, CONST_BITS+2);
+    dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(z2 + z3, CONST_BITS+2);
+
+    /* Odd part */
+
+    tmp2 = MULTIPLY(tmp10 - tmp12 - tmp13 + tmp15 + tmp16,
+		    FIX(1.393487498));                         /* c5 */
+    tmp1 = MULTIPLY(tmp10 - tmp14 - tmp15, FIX(1.530307725)) + /* c3 */
+	   MULTIPLY(tmp11 - tmp13 - tmp16, FIX(0.945782187));  /* c9 */
+    tmp12 = MULTIPLY(tmp12, FIX(1.393487498));                 /* c5 */
+    tmp4 = MULTIPLY(tmp10 - tmp16, FIX(1.600246161)) +         /* c1 */
+	   MULTIPLY(tmp11 + tmp14, FIX(1.530307725)) +         /* c3 */
+	   MULTIPLY(tmp13 + tmp15, FIX(0.654463974));          /* c11 */
+    tmp0 = MULTIPLY(tmp13, FIX(0.541301207)) -                 /* c7-c11 */
+	   MULTIPLY(tmp14, FIX(0.584525538)) +                 /* c3-c9 */
+	   MULTIPLY(tmp16, FIX(1.934788705)) + tmp4 + tmp12;   /* c1+c13 */
+    tmp3 = MULTIPLY(tmp10, - FIX(0.404480980)) -               /* -(c1-c7) */
+	   MULTIPLY(tmp11, FIX(2.476089912)) -                 /* c3+c9 */
+	   MULTIPLY(tmp15, FIX(0.989006518)) + tmp4 - tmp12;   /* c11+c13 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+2);
+    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+2);
+    dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+2);
+    dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+2);
+
+    dataptr++;			/* advance pointer to next column */
+    wsptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 16x16 sample block.
+ */
+
+GLOBAL(void)
+jpeg_fdct_16x16 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17;
+  DCTELEM workspace[DCTSIZE2];
+  DCTELEM *dataptr;
+  DCTELEM *wsptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* cK represents sqrt(2) * cos(K*pi/32). */
+
+  dataptr = data;
+  ctr = 0;
+  for (;;) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[15]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[14]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[13]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[12]);
+    tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[11]);
+    tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[10]);
+    tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[9]);
+    tmp7 = GETJSAMPLE(elemptr[7]) + GETJSAMPLE(elemptr[8]);
+
+    tmp10 = tmp0 + tmp7;
+    tmp14 = tmp0 - tmp7;
+    tmp11 = tmp1 + tmp6;
+    tmp15 = tmp1 - tmp6;
+    tmp12 = tmp2 + tmp5;
+    tmp16 = tmp2 - tmp5;
+    tmp13 = tmp3 + tmp4;
+    tmp17 = tmp3 - tmp4;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[15]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[14]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[13]);
+    tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[12]);
+    tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[11]);
+    tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[10]);
+    tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[9]);
+    tmp7 = GETJSAMPLE(elemptr[7]) - GETJSAMPLE(elemptr[8]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp10 + tmp11 + tmp12 + tmp13 - 16 * CENTERJSAMPLE) << PASS1_BITS);
+    dataptr[4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */
+	      MULTIPLY(tmp11 - tmp12, FIX_0_541196100),   /* c12[16] = c6[8] */
+	      CONST_BITS-PASS1_BITS);
+
+    tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) +   /* c14[16] = c7[8] */
+	    MULTIPLY(tmp14 - tmp16, FIX(1.387039845));    /* c2[16] = c1[8] */
+
+    dataptr[2] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982))   /* c6+c14 */
+	      + MULTIPLY(tmp16, FIX(2.172734804)),        /* c2+c10 */
+	      CONST_BITS-PASS1_BITS);
+    dataptr[6] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243))   /* c2-c6 */
+	      - MULTIPLY(tmp17, FIX(1.061594338)),        /* c10+c14 */
+	      CONST_BITS-PASS1_BITS);
+
+    /* Odd part */
+
+    tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) +         /* c3 */
+	    MULTIPLY(tmp6 - tmp7, FIX(0.410524528));          /* c13 */
+    tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) +         /* c5 */
+	    MULTIPLY(tmp5 + tmp7, FIX(0.666655658));          /* c11 */
+    tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) +         /* c7 */
+	    MULTIPLY(tmp4 - tmp7, FIX(0.897167586));          /* c9 */
+    tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) +         /* c15 */
+	    MULTIPLY(tmp6 - tmp5, FIX(1.407403738));          /* c1 */
+    tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) +       /* -c11 */
+	    MULTIPLY(tmp4 + tmp6, - FIX(1.247225013));        /* -c5 */
+    tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) +       /* -c3 */
+	    MULTIPLY(tmp5 - tmp4, FIX(0.410524528));          /* c13 */
+    tmp10 = tmp11 + tmp12 + tmp13 -
+	    MULTIPLY(tmp0, FIX(2.286341144)) +                /* c7+c5+c3-c1 */
+	    MULTIPLY(tmp7, FIX(0.779653625));                 /* c15+c13-c11+c9 */
+    tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */
+	     - MULTIPLY(tmp6, FIX(1.663905119));              /* c7+c13+c1-c5 */
+    tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */
+	     + MULTIPLY(tmp5, FIX(1.227391138));              /* c9-c11+c1-c13 */
+    tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */
+	     + MULTIPLY(tmp4, FIX(2.167985692));              /* c1+c13+c5-c9 */
+
+    dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS);
+    dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS);
+    dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS);
+    dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS);
+
+    ctr++;
+
+    if (ctr != DCTSIZE) {
+      if (ctr == DCTSIZE * 2)
+	break;			/* Done. */
+      dataptr += DCTSIZE;	/* advance pointer to next row */
+    } else
+      dataptr = workspace;	/* switch pointer to extended workspace */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/16)**2 = 1/2**2.
+   */
+
+  dataptr = data;
+  wsptr = workspace;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*4];
+    tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*3];
+    tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*2];
+    tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*1];
+    tmp7 = dataptr[DCTSIZE*7] + wsptr[DCTSIZE*0];
+
+    tmp10 = tmp0 + tmp7;
+    tmp14 = tmp0 - tmp7;
+    tmp11 = tmp1 + tmp6;
+    tmp15 = tmp1 - tmp6;
+    tmp12 = tmp2 + tmp5;
+    tmp16 = tmp2 - tmp5;
+    tmp13 = tmp3 + tmp4;
+    tmp17 = tmp3 - tmp4;
+
+    tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*4];
+    tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*3];
+    tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*2];
+    tmp6 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*1];
+    tmp7 = dataptr[DCTSIZE*7] - wsptr[DCTSIZE*0];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(tmp10 + tmp11 + tmp12 + tmp13, PASS1_BITS+2);
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */
+	      MULTIPLY(tmp11 - tmp12, FIX_0_541196100),   /* c12[16] = c6[8] */
+	      CONST_BITS+PASS1_BITS+2);
+
+    tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) +   /* c14[16] = c7[8] */
+	    MULTIPLY(tmp14 - tmp16, FIX(1.387039845));    /* c2[16] = c1[8] */
+
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982))   /* c6+c14 */
+	      + MULTIPLY(tmp16, FIX(2.172734804)),        /* c2+10 */
+	      CONST_BITS+PASS1_BITS+2);
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243))   /* c2-c6 */
+	      - MULTIPLY(tmp17, FIX(1.061594338)),        /* c10+c14 */
+	      CONST_BITS+PASS1_BITS+2);
+
+    /* Odd part */
+
+    tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) +         /* c3 */
+	    MULTIPLY(tmp6 - tmp7, FIX(0.410524528));          /* c13 */
+    tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) +         /* c5 */
+	    MULTIPLY(tmp5 + tmp7, FIX(0.666655658));          /* c11 */
+    tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) +         /* c7 */
+	    MULTIPLY(tmp4 - tmp7, FIX(0.897167586));          /* c9 */
+    tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) +         /* c15 */
+	    MULTIPLY(tmp6 - tmp5, FIX(1.407403738));          /* c1 */
+    tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) +       /* -c11 */
+	    MULTIPLY(tmp4 + tmp6, - FIX(1.247225013));        /* -c5 */
+    tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) +       /* -c3 */
+	    MULTIPLY(tmp5 - tmp4, FIX(0.410524528));          /* c13 */
+    tmp10 = tmp11 + tmp12 + tmp13 -
+	    MULTIPLY(tmp0, FIX(2.286341144)) +                /* c7+c5+c3-c1 */
+	    MULTIPLY(tmp7, FIX(0.779653625));                 /* c15+c13-c11+c9 */
+    tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */
+	     - MULTIPLY(tmp6, FIX(1.663905119));              /* c7+c13+c1-c5 */
+    tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */
+	     + MULTIPLY(tmp5, FIX(1.227391138));              /* c9-c11+c1-c13 */
+    tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */
+	     + MULTIPLY(tmp4, FIX(2.167985692));              /* c1+c13+c5-c9 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS+2);
+    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS+2);
+    dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS+2);
+    dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS+2);
+
+    dataptr++;			/* advance pointer to next column */
+    wsptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 16x8 sample block.
+ *
+ * 16-point FDCT in pass 1 (rows), 8-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_16x8 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17;
+  INT32 z1;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* 16-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/32). */
+
+  dataptr = data;
+  ctr = 0;
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[15]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[14]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[13]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[12]);
+    tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[11]);
+    tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[10]);
+    tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[9]);
+    tmp7 = GETJSAMPLE(elemptr[7]) + GETJSAMPLE(elemptr[8]);
+
+    tmp10 = tmp0 + tmp7;
+    tmp14 = tmp0 - tmp7;
+    tmp11 = tmp1 + tmp6;
+    tmp15 = tmp1 - tmp6;
+    tmp12 = tmp2 + tmp5;
+    tmp16 = tmp2 - tmp5;
+    tmp13 = tmp3 + tmp4;
+    tmp17 = tmp3 - tmp4;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[15]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[14]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[13]);
+    tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[12]);
+    tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[11]);
+    tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[10]);
+    tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[9]);
+    tmp7 = GETJSAMPLE(elemptr[7]) - GETJSAMPLE(elemptr[8]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp10 + tmp11 + tmp12 + tmp13 - 16 * CENTERJSAMPLE) << PASS1_BITS);
+    dataptr[4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */
+	      MULTIPLY(tmp11 - tmp12, FIX_0_541196100),   /* c12[16] = c6[8] */
+	      CONST_BITS-PASS1_BITS);
+
+    tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) +   /* c14[16] = c7[8] */
+	    MULTIPLY(tmp14 - tmp16, FIX(1.387039845));    /* c2[16] = c1[8] */
+
+    dataptr[2] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982))   /* c6+c14 */
+	      + MULTIPLY(tmp16, FIX(2.172734804)),        /* c2+c10 */
+	      CONST_BITS-PASS1_BITS);
+    dataptr[6] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243))   /* c2-c6 */
+	      - MULTIPLY(tmp17, FIX(1.061594338)),        /* c10+c14 */
+	      CONST_BITS-PASS1_BITS);
+
+    /* Odd part */
+
+    tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) +         /* c3 */
+	    MULTIPLY(tmp6 - tmp7, FIX(0.410524528));          /* c13 */
+    tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) +         /* c5 */
+	    MULTIPLY(tmp5 + tmp7, FIX(0.666655658));          /* c11 */
+    tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) +         /* c7 */
+	    MULTIPLY(tmp4 - tmp7, FIX(0.897167586));          /* c9 */
+    tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) +         /* c15 */
+	    MULTIPLY(tmp6 - tmp5, FIX(1.407403738));          /* c1 */
+    tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) +       /* -c11 */
+	    MULTIPLY(tmp4 + tmp6, - FIX(1.247225013));        /* -c5 */
+    tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) +       /* -c3 */
+	    MULTIPLY(tmp5 - tmp4, FIX(0.410524528));          /* c13 */
+    tmp10 = tmp11 + tmp12 + tmp13 -
+	    MULTIPLY(tmp0, FIX(2.286341144)) +                /* c7+c5+c3-c1 */
+	    MULTIPLY(tmp7, FIX(0.779653625));                 /* c15+c13-c11+c9 */
+    tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */
+	     - MULTIPLY(tmp6, FIX(1.663905119));              /* c7+c13+c1-c5 */
+    tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */
+	     + MULTIPLY(tmp5, FIX(1.227391138));              /* c9-c11+c1-c13 */
+    tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */
+	     + MULTIPLY(tmp4, FIX(2.167985692));              /* c1+c13+c5-c9 */
+
+    dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS);
+    dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS);
+    dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS);
+    dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by 8/16 = 1/2.
+   */
+
+  dataptr = data;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part per LL&M figure 1 --- note that published figure is faulty;
+     * rotator "sqrt(2)*c1" should be "sqrt(2)*c6".
+     */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
+
+    tmp10 = tmp0 + tmp3;
+    tmp12 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp13 = tmp1 - tmp2;
+
+    tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
+
+    dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS+1);
+    dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS+1);
+
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
+    dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, FIX_0_765366865),
+					   CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 - MULTIPLY(tmp13, FIX_1_847759065),
+					   CONST_BITS+PASS1_BITS+1);
+
+    /* Odd part per figure 8 --- note paper omits factor of sqrt(2).
+     * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16).
+     * i0..i3 in the paper are tmp0..tmp3 here.
+     */
+
+    tmp10 = tmp0 + tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp0 + tmp2;
+    tmp13 = tmp1 + tmp3;
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /*  c3 */
+
+    tmp0  = MULTIPLY(tmp0,    FIX_1_501321110);    /*  c1+c3-c5-c7 */
+    tmp1  = MULTIPLY(tmp1,    FIX_3_072711026);    /*  c1+c3+c5-c7 */
+    tmp2  = MULTIPLY(tmp2,    FIX_2_053119869);    /*  c1+c3-c5+c7 */
+    tmp3  = MULTIPLY(tmp3,    FIX_0_298631336);    /* -c1+c3+c5-c7 */
+    tmp10 = MULTIPLY(tmp10, - FIX_0_899976223);    /*  c7-c3 */
+    tmp11 = MULTIPLY(tmp11, - FIX_2_562915447);    /* -c1-c3 */
+    tmp12 = MULTIPLY(tmp12, - FIX_0_390180644);    /*  c5-c3 */
+    tmp13 = MULTIPLY(tmp13, - FIX_1_961570560);    /* -c3-c5 */
+
+    tmp12 += z1;
+    tmp13 += z1;
+
+    dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0 + tmp10 + tmp12,
+					   CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1 + tmp11 + tmp13,
+					   CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2 + tmp11 + tmp12,
+					   CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3 + tmp10 + tmp13,
+					   CONST_BITS+PASS1_BITS+1);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 14x7 sample block.
+ *
+ * 14-point FDCT in pass 1 (rows), 7-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_14x7 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16;
+  INT32 z1, z2, z3;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Zero bottom row of output coefficient block. */
+  MEMZERO(&data[DCTSIZE*7], SIZEOF(DCTELEM) * DCTSIZE);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* 14-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/28). */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 7; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[13]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[12]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[11]);
+    tmp13 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[10]);
+    tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[9]);
+    tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[8]);
+    tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[7]);
+
+    tmp10 = tmp0 + tmp6;
+    tmp14 = tmp0 - tmp6;
+    tmp11 = tmp1 + tmp5;
+    tmp15 = tmp1 - tmp5;
+    tmp12 = tmp2 + tmp4;
+    tmp16 = tmp2 - tmp4;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[13]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[12]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[11]);
+    tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[10]);
+    tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[9]);
+    tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[8]);
+    tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[7]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp10 + tmp11 + tmp12 + tmp13 - 14 * CENTERJSAMPLE) << PASS1_BITS);
+    tmp13 += tmp13;
+    dataptr[4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.274162392)) + /* c4 */
+	      MULTIPLY(tmp11 - tmp13, FIX(0.314692123)) - /* c12 */
+	      MULTIPLY(tmp12 - tmp13, FIX(0.881747734)),  /* c8 */
+	      CONST_BITS-PASS1_BITS);
+
+    tmp10 = MULTIPLY(tmp14 + tmp15, FIX(1.105676686));    /* c6 */
+
+    dataptr[2] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.273079590))   /* c2-c6 */
+	      + MULTIPLY(tmp16, FIX(0.613604268)),        /* c10 */
+	      CONST_BITS-PASS1_BITS);
+    dataptr[6] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.719280954))   /* c6+c10 */
+	      - MULTIPLY(tmp16, FIX(1.378756276)),        /* c2 */
+	      CONST_BITS-PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = tmp1 + tmp2;
+    tmp11 = tmp5 - tmp4;
+    dataptr[7] = (DCTELEM) ((tmp0 - tmp10 + tmp3 - tmp11 - tmp6) << PASS1_BITS);
+    tmp3 <<= CONST_BITS;
+    tmp10 = MULTIPLY(tmp10, - FIX(0.158341681));          /* -c13 */
+    tmp11 = MULTIPLY(tmp11, FIX(1.405321284));            /* c1 */
+    tmp10 += tmp11 - tmp3;
+    tmp11 = MULTIPLY(tmp0 + tmp2, FIX(1.197448846)) +     /* c5 */
+	    MULTIPLY(tmp4 + tmp6, FIX(0.752406978));      /* c9 */
+    dataptr[5] = (DCTELEM)
+      DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(2.373959773)) /* c3+c5-c13 */
+	      + MULTIPLY(tmp4, FIX(1.119999435)),         /* c1+c11-c9 */
+	      CONST_BITS-PASS1_BITS);
+    tmp12 = MULTIPLY(tmp0 + tmp1, FIX(1.334852607)) +     /* c3 */
+	    MULTIPLY(tmp5 - tmp6, FIX(0.467085129));      /* c11 */
+    dataptr[3] = (DCTELEM)
+      DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.424103948)) /* c3-c9-c13 */
+	      - MULTIPLY(tmp5, FIX(3.069855259)),         /* c1+c5+c11 */
+	      CONST_BITS-PASS1_BITS);
+    dataptr[1] = (DCTELEM)
+      DESCALE(tmp11 + tmp12 + tmp3 + tmp6 -
+	      MULTIPLY(tmp0 + tmp6, FIX(1.126980169)),    /* c3+c5-c1 */
+	      CONST_BITS-PASS1_BITS);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/14)*(8/7) = 32/49, which we
+   * partially fold into the constant multipliers and final shifting:
+   * 7-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/14) * 64/49.
+   */
+
+  dataptr = data;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*6];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*5];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*4];
+    tmp3 = dataptr[DCTSIZE*3];
+
+    tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*6];
+    tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*5];
+    tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*4];
+
+    z1 = tmp0 + tmp2;
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(z1 + tmp1 + tmp3, FIX(1.306122449)), /* 64/49 */
+	      CONST_BITS+PASS1_BITS+1);
+    tmp3 += tmp3;
+    z1 -= tmp3;
+    z1 -= tmp3;
+    z1 = MULTIPLY(z1, FIX(0.461784020));                /* (c2+c6-c4)/2 */
+    z2 = MULTIPLY(tmp0 - tmp2, FIX(1.202428084));       /* (c2+c4-c6)/2 */
+    z3 = MULTIPLY(tmp1 - tmp2, FIX(0.411026446));       /* c6 */
+    dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS+PASS1_BITS+1);
+    z1 -= z2;
+    z2 = MULTIPLY(tmp0 - tmp1, FIX(1.151670509));       /* c4 */
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.923568041)), /* c2+c6-c4 */
+	      CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+PASS1_BITS+1);
+
+    /* Odd part */
+
+    tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.221765677));   /* (c3+c1-c5)/2 */
+    tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.222383464));   /* (c3+c5-c1)/2 */
+    tmp0 = tmp1 - tmp2;
+    tmp1 += tmp2;
+    tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.800824523)); /* -c1 */
+    tmp1 += tmp2;
+    tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.801442310));   /* c5 */
+    tmp0 += tmp3;
+    tmp2 += tmp3 + MULTIPLY(tmp12, FIX(2.443531355));   /* c3+c1-c5 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS+1);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 12x6 sample block.
+ *
+ * 12-point FDCT in pass 1 (rows), 6-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_12x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Zero 2 bottom rows of output coefficient block. */
+  MEMZERO(&data[DCTSIZE*6], SIZEOF(DCTELEM) * DCTSIZE * 2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* 12-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/24). */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 6; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[11]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[10]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[9]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[8]);
+    tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[7]);
+    tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[6]);
+
+    tmp10 = tmp0 + tmp5;
+    tmp13 = tmp0 - tmp5;
+    tmp11 = tmp1 + tmp4;
+    tmp14 = tmp1 - tmp4;
+    tmp12 = tmp2 + tmp3;
+    tmp15 = tmp2 - tmp3;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[11]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[10]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[9]);
+    tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[8]);
+    tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[7]);
+    tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[6]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp10 + tmp11 + tmp12 - 12 * CENTERJSAMPLE) << PASS1_BITS);
+    dataptr[6] = (DCTELEM) ((tmp13 - tmp14 - tmp15) << PASS1_BITS);
+    dataptr[4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.224744871)), /* c4 */
+	      CONST_BITS-PASS1_BITS);
+    dataptr[2] = (DCTELEM)
+      DESCALE(tmp14 - tmp15 + MULTIPLY(tmp13 + tmp15, FIX(1.366025404)), /* c2 */
+	      CONST_BITS-PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = MULTIPLY(tmp1 + tmp4, FIX_0_541196100);    /* c9 */
+    tmp14 = tmp10 + MULTIPLY(tmp1, FIX_0_765366865);   /* c3-c9 */
+    tmp15 = tmp10 - MULTIPLY(tmp4, FIX_1_847759065);   /* c3+c9 */
+    tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.121971054));   /* c5 */
+    tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.860918669));   /* c7 */
+    tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.580774953)) /* c5+c7-c1 */
+	    + MULTIPLY(tmp5, FIX(0.184591911));        /* c11 */
+    tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.184591911)); /* -c11 */
+    tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.339493912)) /* c1+c5-c11 */
+	    + MULTIPLY(tmp5, FIX(0.860918669));        /* c7 */
+    tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.725788011)) /* c1+c11-c7 */
+	    - MULTIPLY(tmp5, FIX(1.121971054));        /* c5 */
+    tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.306562965)) /* c3 */
+	    - MULTIPLY(tmp2 + tmp5, FIX_0_541196100);  /* c9 */
+
+    dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS);
+    dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS);
+    dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS);
+    dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/12)*(8/6) = 8/9, which we
+   * partially fold into the constant multipliers and final shifting:
+   * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12) * 16/9.
+   */
+
+  dataptr = data;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5];
+    tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3];
+
+    tmp10 = tmp0 + tmp2;
+    tmp12 = tmp0 - tmp2;
+
+    tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5];
+    tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4];
+    tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)),         /* 16/9 */
+	      CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp12, FIX(2.177324216)),                 /* c2 */
+	      CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */
+	      CONST_BITS+PASS1_BITS+1);
+
+    /* Odd part */
+
+    tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829));             /* c5 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)),   /* 16/9 */
+	      CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)),    /* 16/9 */
+	      CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*5] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)),   /* 16/9 */
+	      CONST_BITS+PASS1_BITS+1);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 10x5 sample block.
+ *
+ * 10-point FDCT in pass 1 (rows), 5-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_10x5 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Zero 3 bottom rows of output coefficient block. */
+  MEMZERO(&data[DCTSIZE*5], SIZEOF(DCTELEM) * DCTSIZE * 3);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* 10-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/20). */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 5; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[9]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[8]);
+    tmp12 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[7]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[6]);
+    tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[5]);
+
+    tmp10 = tmp0 + tmp4;
+    tmp13 = tmp0 - tmp4;
+    tmp11 = tmp1 + tmp3;
+    tmp14 = tmp1 - tmp3;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[9]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[8]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[7]);
+    tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[6]);
+    tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[5]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp10 + tmp11 + tmp12 - 10 * CENTERJSAMPLE) << PASS1_BITS);
+    tmp12 += tmp12;
+    dataptr[4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.144122806)) - /* c4 */
+	      MULTIPLY(tmp11 - tmp12, FIX(0.437016024)),  /* c8 */
+	      CONST_BITS-PASS1_BITS);
+    tmp10 = MULTIPLY(tmp13 + tmp14, FIX(0.831253876));    /* c6 */
+    dataptr[2] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.513743148)),  /* c2-c6 */
+	      CONST_BITS-PASS1_BITS);
+    dataptr[6] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.176250899)),  /* c2+c6 */
+	      CONST_BITS-PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = tmp0 + tmp4;
+    tmp11 = tmp1 - tmp3;
+    dataptr[5] = (DCTELEM) ((tmp10 - tmp11 - tmp2) << PASS1_BITS);
+    tmp2 <<= CONST_BITS;
+    dataptr[1] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0, FIX(1.396802247)) +          /* c1 */
+	      MULTIPLY(tmp1, FIX(1.260073511)) + tmp2 +   /* c3 */
+	      MULTIPLY(tmp3, FIX(0.642039522)) +          /* c7 */
+	      MULTIPLY(tmp4, FIX(0.221231742)),           /* c9 */
+	      CONST_BITS-PASS1_BITS);
+    tmp12 = MULTIPLY(tmp0 - tmp4, FIX(0.951056516)) -     /* (c3+c7)/2 */
+	    MULTIPLY(tmp1 + tmp3, FIX(0.587785252));      /* (c1-c9)/2 */
+    tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.309016994)) +   /* (c3-c7)/2 */
+	    (tmp11 << (CONST_BITS - 1)) - tmp2;
+    dataptr[3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS-PASS1_BITS);
+    dataptr[7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS-PASS1_BITS);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/10)*(8/5) = 32/25, which we
+   * fold into the constant multipliers:
+   * 5-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/10) * 32/25.
+   */
+
+  dataptr = data;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*4];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*3];
+    tmp2 = dataptr[DCTSIZE*2];
+
+    tmp10 = tmp0 + tmp1;
+    tmp11 = tmp0 - tmp1;
+
+    tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*4];
+    tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*3];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 + tmp2, FIX(1.28)),        /* 32/25 */
+	      CONST_BITS+PASS1_BITS);
+    tmp11 = MULTIPLY(tmp11, FIX(1.011928851));          /* (c2+c4)/2 */
+    tmp10 -= tmp2 << 2;
+    tmp10 = MULTIPLY(tmp10, FIX(0.452548340));          /* (c2-c4)/2 */
+    dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS+PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = MULTIPLY(tmp0 + tmp1, FIX(1.064004961));    /* c3 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.657591230)), /* c1-c3 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.785601151)), /* c1+c3 */
+	      CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on an 8x4 sample block.
+ *
+ * 8-point FDCT in pass 1 (rows), 4-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_8x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3;
+  INT32 tmp10, tmp11, tmp12, tmp13;
+  INT32 z1;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Zero 4 bottom rows of output coefficient block. */
+  MEMZERO(&data[DCTSIZE*4], SIZEOF(DCTELEM) * DCTSIZE * 4);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* We must also scale the output by 8/4 = 2, which we add here. */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 4; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part per LL&M figure 1 --- note that published figure is faulty;
+     * rotator "sqrt(2)*c1" should be "sqrt(2)*c6".
+     */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]);
+
+    tmp10 = tmp0 + tmp3;
+    tmp12 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp13 = tmp1 - tmp2;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]);
+    tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << (PASS1_BITS+1));
+    dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << (PASS1_BITS+1));
+
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS-PASS1_BITS-2);
+    dataptr[2] = (DCTELEM) RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865),
+				       CONST_BITS-PASS1_BITS-1);
+    dataptr[6] = (DCTELEM) RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065),
+				       CONST_BITS-PASS1_BITS-1);
+
+    /* Odd part per figure 8 --- note paper omits factor of sqrt(2).
+     * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16).
+     * i0..i3 in the paper are tmp0..tmp3 here.
+     */
+
+    tmp10 = tmp0 + tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp0 + tmp2;
+    tmp13 = tmp1 + tmp3;
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /*  c3 */
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS-PASS1_BITS-2);
+
+    tmp0  = MULTIPLY(tmp0,    FIX_1_501321110);    /*  c1+c3-c5-c7 */
+    tmp1  = MULTIPLY(tmp1,    FIX_3_072711026);    /*  c1+c3+c5-c7 */
+    tmp2  = MULTIPLY(tmp2,    FIX_2_053119869);    /*  c1+c3-c5+c7 */
+    tmp3  = MULTIPLY(tmp3,    FIX_0_298631336);    /* -c1+c3+c5-c7 */
+    tmp10 = MULTIPLY(tmp10, - FIX_0_899976223);    /*  c7-c3 */
+    tmp11 = MULTIPLY(tmp11, - FIX_2_562915447);    /* -c1-c3 */
+    tmp12 = MULTIPLY(tmp12, - FIX_0_390180644);    /*  c5-c3 */
+    tmp13 = MULTIPLY(tmp13, - FIX_1_961570560);    /* -c3-c5 */
+
+    tmp12 += z1;
+    tmp13 += z1;
+
+    dataptr[1] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS-PASS1_BITS-1);
+    dataptr[3] = (DCTELEM)
+      RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS-PASS1_BITS-1);
+    dataptr[5] = (DCTELEM)
+      RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS-PASS1_BITS-1);
+    dataptr[7] = (DCTELEM)
+      RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS-PASS1_BITS-1);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * 4-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16).
+   */
+
+  dataptr = data;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3] + (ONE << (PASS1_BITS-1));
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2];
+
+    tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3];
+    tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2];
+
+    dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS);
+    dataptr[DCTSIZE*2] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS);
+
+    /* Odd part */
+
+    tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100);   /* c6 */
+    /* Add fudge factor here for final descale. */
+    tmp0 += ONE << (CONST_BITS+PASS1_BITS-1);
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */
+		  CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */
+		  CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 6x3 sample block.
+ *
+ * 6-point FDCT in pass 1 (rows), 3-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_6x3 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2;
+  INT32 tmp10, tmp11, tmp12;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* We scale the results further by 2 as part of output adaption */
+  /* scaling for different DCT size. */
+  /* 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12). */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 3; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]);
+    tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]);
+
+    tmp10 = tmp0 + tmp2;
+    tmp12 = tmp0 - tmp2;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << (PASS1_BITS+1));
+    dataptr[2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp12, FIX(1.224744871)),                 /* c2 */
+	      CONST_BITS-PASS1_BITS-1);
+    dataptr[4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */
+	      CONST_BITS-PASS1_BITS-1);
+
+    /* Odd part */
+
+    tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)),     /* c5 */
+		    CONST_BITS-PASS1_BITS-1);
+
+    dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << (PASS1_BITS+1)));
+    dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << (PASS1_BITS+1));
+    dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << (PASS1_BITS+1)));
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/6)*(8/3) = 32/9, which we partially
+   * fold into the constant multipliers (other part was done in pass 1):
+   * 3-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/6) * 16/9.
+   */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 6; ctr++) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*2];
+    tmp1 = dataptr[DCTSIZE*1];
+
+    tmp2 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*2];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 + tmp1, FIX(1.777777778)),        /* 16/9 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(1.257078722)), /* c2 */
+	      CONST_BITS+PASS1_BITS);
+
+    /* Odd part */
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp2, FIX(2.177324216)),               /* c1 */
+	      CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 4x2 sample block.
+ *
+ * 4-point FDCT in pass 1 (rows), 2-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_4x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1;
+  INT32 tmp10, tmp11;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* We must also scale the output by (8/4)*(8/2) = 2**3, which we add here. */
+  /* 4-point FDCT kernel, */
+  /* cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 2; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]);
+
+    tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]);
+    tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+3));
+    dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+3));
+
+    /* Odd part */
+
+    tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100);       /* c6 */
+    /* Add fudge factor here for final descale. */
+    tmp0 += ONE << (CONST_BITS-PASS1_BITS-4);
+
+    dataptr[1] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */
+		  CONST_BITS-PASS1_BITS-3);
+    dataptr[3] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */
+		  CONST_BITS-PASS1_BITS-3);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 4; ctr++) {
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = dataptr[DCTSIZE*0] + (ONE << (PASS1_BITS-1));
+    tmp1 = dataptr[DCTSIZE*1];
+
+    dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS);
+
+    /* Odd part */
+
+    dataptr[DCTSIZE*1] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 2x1 sample block.
+ *
+ * 2-point FDCT in pass 1 (rows), 1-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_2x1 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1;
+  JSAMPROW elemptr;
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  elemptr = sample_data[0] + start_col;
+
+  tmp0 = GETJSAMPLE(elemptr[0]);
+  tmp1 = GETJSAMPLE(elemptr[1]);
+
+  /* We leave the results scaled up by an overall factor of 8.
+   * We must also scale the output by (8/2)*(8/1) = 2**5.
+   */
+
+  /* Even part */
+  /* Apply unsigned->signed conversion */
+  data[0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 5);
+
+  /* Odd part */
+  data[1] = (DCTELEM) ((tmp0 - tmp1) << 5);
+}
+
+
+/*
+ * Perform the forward DCT on an 8x16 sample block.
+ *
+ * 8-point FDCT in pass 1 (rows), 16-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_8x16 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17;
+  INT32 z1;
+  DCTELEM workspace[DCTSIZE2];
+  DCTELEM *dataptr;
+  DCTELEM *wsptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+
+  dataptr = data;
+  ctr = 0;
+  for (;;) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part per LL&M figure 1 --- note that published figure is faulty;
+     * rotator "sqrt(2)*c1" should be "sqrt(2)*c6".
+     */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]);
+
+    tmp10 = tmp0 + tmp3;
+    tmp12 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp13 = tmp1 - tmp2;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]);
+    tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM) ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << PASS1_BITS);
+    dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS);
+
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
+    dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, FIX_0_765366865),
+				   CONST_BITS-PASS1_BITS);
+    dataptr[6] = (DCTELEM) DESCALE(z1 - MULTIPLY(tmp13, FIX_1_847759065),
+				   CONST_BITS-PASS1_BITS);
+
+    /* Odd part per figure 8 --- note paper omits factor of sqrt(2).
+     * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16).
+     * i0..i3 in the paper are tmp0..tmp3 here.
+     */
+
+    tmp10 = tmp0 + tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp0 + tmp2;
+    tmp13 = tmp1 + tmp3;
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /*  c3 */
+
+    tmp0  = MULTIPLY(tmp0,    FIX_1_501321110);    /*  c1+c3-c5-c7 */
+    tmp1  = MULTIPLY(tmp1,    FIX_3_072711026);    /*  c1+c3+c5-c7 */
+    tmp2  = MULTIPLY(tmp2,    FIX_2_053119869);    /*  c1+c3-c5+c7 */
+    tmp3  = MULTIPLY(tmp3,    FIX_0_298631336);    /* -c1+c3+c5-c7 */
+    tmp10 = MULTIPLY(tmp10, - FIX_0_899976223);    /*  c7-c3 */
+    tmp11 = MULTIPLY(tmp11, - FIX_2_562915447);    /* -c1-c3 */
+    tmp12 = MULTIPLY(tmp12, - FIX_0_390180644);    /*  c5-c3 */
+    tmp13 = MULTIPLY(tmp13, - FIX_1_961570560);    /* -c3-c5 */
+
+    tmp12 += z1;
+    tmp13 += z1;
+
+    dataptr[1] = (DCTELEM) DESCALE(tmp0 + tmp10 + tmp12, CONST_BITS-PASS1_BITS);
+    dataptr[3] = (DCTELEM) DESCALE(tmp1 + tmp11 + tmp13, CONST_BITS-PASS1_BITS);
+    dataptr[5] = (DCTELEM) DESCALE(tmp2 + tmp11 + tmp12, CONST_BITS-PASS1_BITS);
+    dataptr[7] = (DCTELEM) DESCALE(tmp3 + tmp10 + tmp13, CONST_BITS-PASS1_BITS);
+
+    ctr++;
+
+    if (ctr != DCTSIZE) {
+      if (ctr == DCTSIZE * 2)
+	break;			/* Done. */
+      dataptr += DCTSIZE;	/* advance pointer to next row */
+    } else
+      dataptr = workspace;	/* switch pointer to extended workspace */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by 8/16 = 1/2.
+   * 16-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/32).
+   */
+
+  dataptr = data;
+  wsptr = workspace;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*4];
+    tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*3];
+    tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*2];
+    tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*1];
+    tmp7 = dataptr[DCTSIZE*7] + wsptr[DCTSIZE*0];
+
+    tmp10 = tmp0 + tmp7;
+    tmp14 = tmp0 - tmp7;
+    tmp11 = tmp1 + tmp6;
+    tmp15 = tmp1 - tmp6;
+    tmp12 = tmp2 + tmp5;
+    tmp16 = tmp2 - tmp5;
+    tmp13 = tmp3 + tmp4;
+    tmp17 = tmp3 - tmp4;
+
+    tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*4];
+    tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*3];
+    tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*2];
+    tmp6 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*1];
+    tmp7 = dataptr[DCTSIZE*7] - wsptr[DCTSIZE*0];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(tmp10 + tmp11 + tmp12 + tmp13, PASS1_BITS+1);
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */
+	      MULTIPLY(tmp11 - tmp12, FIX_0_541196100),   /* c12[16] = c6[8] */
+	      CONST_BITS+PASS1_BITS+1);
+
+    tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) +   /* c14[16] = c7[8] */
+	    MULTIPLY(tmp14 - tmp16, FIX(1.387039845));    /* c2[16] = c1[8] */
+
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982))   /* c6+c14 */
+	      + MULTIPLY(tmp16, FIX(2.172734804)),        /* c2+c10 */
+	      CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243))   /* c2-c6 */
+	      - MULTIPLY(tmp17, FIX(1.061594338)),        /* c10+c14 */
+	      CONST_BITS+PASS1_BITS+1);
+
+    /* Odd part */
+
+    tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) +         /* c3 */
+	    MULTIPLY(tmp6 - tmp7, FIX(0.410524528));          /* c13 */
+    tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) +         /* c5 */
+	    MULTIPLY(tmp5 + tmp7, FIX(0.666655658));          /* c11 */
+    tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) +         /* c7 */
+	    MULTIPLY(tmp4 - tmp7, FIX(0.897167586));          /* c9 */
+    tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) +         /* c15 */
+	    MULTIPLY(tmp6 - tmp5, FIX(1.407403738));          /* c1 */
+    tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) +       /* -c11 */
+	    MULTIPLY(tmp4 + tmp6, - FIX(1.247225013));        /* -c5 */
+    tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) +       /* -c3 */
+	    MULTIPLY(tmp5 - tmp4, FIX(0.410524528));          /* c13 */
+    tmp10 = tmp11 + tmp12 + tmp13 -
+	    MULTIPLY(tmp0, FIX(2.286341144)) +                /* c7+c5+c3-c1 */
+	    MULTIPLY(tmp7, FIX(0.779653625));                 /* c15+c13-c11+c9 */
+    tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */
+	     - MULTIPLY(tmp6, FIX(1.663905119));              /* c7+c13+c1-c5 */
+    tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */
+	     + MULTIPLY(tmp5, FIX(1.227391138));              /* c9-c11+c1-c13 */
+    tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */
+	     + MULTIPLY(tmp4, FIX(2.167985692));              /* c1+c13+c5-c9 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS+1);
+    dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS+1);
+
+    dataptr++;			/* advance pointer to next column */
+    wsptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 7x14 sample block.
+ *
+ * 7-point FDCT in pass 1 (rows), 14-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_7x14 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16;
+  INT32 z1, z2, z3;
+  DCTELEM workspace[8*6];
+  DCTELEM *dataptr;
+  DCTELEM *wsptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* 7-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/14). */
+
+  dataptr = data;
+  ctr = 0;
+  for (;;) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[6]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[5]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[4]);
+    tmp3 = GETJSAMPLE(elemptr[3]);
+
+    tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[6]);
+    tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[5]);
+    tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[4]);
+
+    z1 = tmp0 + tmp2;
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((z1 + tmp1 + tmp3 - 7 * CENTERJSAMPLE) << PASS1_BITS);
+    tmp3 += tmp3;
+    z1 -= tmp3;
+    z1 -= tmp3;
+    z1 = MULTIPLY(z1, FIX(0.353553391));                /* (c2+c6-c4)/2 */
+    z2 = MULTIPLY(tmp0 - tmp2, FIX(0.920609002));       /* (c2+c4-c6)/2 */
+    z3 = MULTIPLY(tmp1 - tmp2, FIX(0.314692123));       /* c6 */
+    dataptr[2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS-PASS1_BITS);
+    z1 -= z2;
+    z2 = MULTIPLY(tmp0 - tmp1, FIX(0.881747734));       /* c4 */
+    dataptr[4] = (DCTELEM)
+      DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.707106781)), /* c2+c6-c4 */
+	      CONST_BITS-PASS1_BITS);
+    dataptr[6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS-PASS1_BITS);
+
+    /* Odd part */
+
+    tmp1 = MULTIPLY(tmp10 + tmp11, FIX(0.935414347));   /* (c3+c1-c5)/2 */
+    tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.170262339));   /* (c3+c5-c1)/2 */
+    tmp0 = tmp1 - tmp2;
+    tmp1 += tmp2;
+    tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.378756276)); /* -c1 */
+    tmp1 += tmp2;
+    tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.613604268));   /* c5 */
+    tmp0 += tmp3;
+    tmp2 += tmp3 + MULTIPLY(tmp12, FIX(1.870828693));   /* c3+c1-c5 */
+
+    dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS);
+    dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS);
+    dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS);
+
+    ctr++;
+
+    if (ctr != DCTSIZE) {
+      if (ctr == 14)
+	break;			/* Done. */
+      dataptr += DCTSIZE;	/* advance pointer to next row */
+    } else
+      dataptr = workspace;	/* switch pointer to extended workspace */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/7)*(8/14) = 32/49, which we
+   * fold into the constant multipliers:
+   * 14-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/28) * 32/49.
+   */
+
+  dataptr = data;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 7; ctr++) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*5];
+    tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*4];
+    tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*3];
+    tmp13 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*2];
+    tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*1];
+    tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*0];
+    tmp6 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7];
+
+    tmp10 = tmp0 + tmp6;
+    tmp14 = tmp0 - tmp6;
+    tmp11 = tmp1 + tmp5;
+    tmp15 = tmp1 - tmp5;
+    tmp12 = tmp2 + tmp4;
+    tmp16 = tmp2 - tmp4;
+
+    tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*5];
+    tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*4];
+    tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*3];
+    tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*2];
+    tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*1];
+    tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*0];
+    tmp6 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12 + tmp13,
+		       FIX(0.653061224)),                 /* 32/49 */
+	      CONST_BITS+PASS1_BITS);
+    tmp13 += tmp13;
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp13, FIX(0.832106052)) + /* c4 */
+	      MULTIPLY(tmp11 - tmp13, FIX(0.205513223)) - /* c12 */
+	      MULTIPLY(tmp12 - tmp13, FIX(0.575835255)),  /* c8 */
+	      CONST_BITS+PASS1_BITS);
+
+    tmp10 = MULTIPLY(tmp14 + tmp15, FIX(0.722074570));    /* c6 */
+
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.178337691))   /* c2-c6 */
+	      + MULTIPLY(tmp16, FIX(0.400721155)),        /* c10 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.122795725))   /* c6+c10 */
+	      - MULTIPLY(tmp16, FIX(0.900412262)),        /* c2 */
+	      CONST_BITS+PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = tmp1 + tmp2;
+    tmp11 = tmp5 - tmp4;
+    dataptr[DCTSIZE*7] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 - tmp10 + tmp3 - tmp11 - tmp6,
+		       FIX(0.653061224)),                 /* 32/49 */
+	      CONST_BITS+PASS1_BITS);
+    tmp3  = MULTIPLY(tmp3 , FIX(0.653061224));            /* 32/49 */
+    tmp10 = MULTIPLY(tmp10, - FIX(0.103406812));          /* -c13 */
+    tmp11 = MULTIPLY(tmp11, FIX(0.917760839));            /* c1 */
+    tmp10 += tmp11 - tmp3;
+    tmp11 = MULTIPLY(tmp0 + tmp2, FIX(0.782007410)) +     /* c5 */
+	    MULTIPLY(tmp4 + tmp6, FIX(0.491367823));      /* c9 */
+    dataptr[DCTSIZE*5] = (DCTELEM)
+      DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(1.550341076)) /* c3+c5-c13 */
+	      + MULTIPLY(tmp4, FIX(0.731428202)),         /* c1+c11-c9 */
+	      CONST_BITS+PASS1_BITS);
+    tmp12 = MULTIPLY(tmp0 + tmp1, FIX(0.871740478)) +     /* c3 */
+	    MULTIPLY(tmp5 - tmp6, FIX(0.305035186));      /* c11 */
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.276965844)) /* c3-c9-c13 */
+	      - MULTIPLY(tmp5, FIX(2.004803435)),         /* c1+c5+c11 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      DESCALE(tmp11 + tmp12 + tmp3
+	      - MULTIPLY(tmp0, FIX(0.735987049))          /* c3+c5-c1 */
+	      - MULTIPLY(tmp6, FIX(0.082925825)),         /* c9-c11-c13 */
+	      CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+    wsptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 6x12 sample block.
+ *
+ * 6-point FDCT in pass 1 (rows), 12-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_6x12 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15;
+  DCTELEM workspace[8*4];
+  DCTELEM *dataptr;
+  DCTELEM *wsptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12). */
+
+  dataptr = data;
+  ctr = 0;
+  for (;;) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]);
+    tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]);
+
+    tmp10 = tmp0 + tmp2;
+    tmp12 = tmp0 - tmp2;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]);
+    tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << PASS1_BITS);
+    dataptr[2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp12, FIX(1.224744871)),                 /* c2 */
+	      CONST_BITS-PASS1_BITS);
+    dataptr[4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */
+	      CONST_BITS-PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)),     /* c5 */
+		    CONST_BITS-PASS1_BITS);
+
+    dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << PASS1_BITS));
+    dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << PASS1_BITS);
+    dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << PASS1_BITS));
+
+    ctr++;
+
+    if (ctr != DCTSIZE) {
+      if (ctr == 12)
+	break;			/* Done. */
+      dataptr += DCTSIZE;	/* advance pointer to next row */
+    } else
+      dataptr = workspace;	/* switch pointer to extended workspace */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/6)*(8/12) = 8/9, which we
+   * fold into the constant multipliers:
+   * 12-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/24) * 8/9.
+   */
+
+  dataptr = data;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 6; ctr++) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*3];
+    tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*2];
+    tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*1];
+    tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*0];
+    tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*7];
+    tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*6];
+
+    tmp10 = tmp0 + tmp5;
+    tmp13 = tmp0 - tmp5;
+    tmp11 = tmp1 + tmp4;
+    tmp14 = tmp1 - tmp4;
+    tmp12 = tmp2 + tmp3;
+    tmp15 = tmp2 - tmp3;
+
+    tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*3];
+    tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*2];
+    tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*1];
+    tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*0];
+    tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*7];
+    tmp5 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*6];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(0.888888889)), /* 8/9 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp13 - tmp14 - tmp15, FIX(0.888888889)), /* 8/9 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.088662108)),         /* c4 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp14 - tmp15, FIX(0.888888889)) +        /* 8/9 */
+	      MULTIPLY(tmp13 + tmp15, FIX(1.214244803)),         /* c2 */
+	      CONST_BITS+PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = MULTIPLY(tmp1 + tmp4, FIX(0.481063200));   /* c9 */
+    tmp14 = tmp10 + MULTIPLY(tmp1, FIX(0.680326102));  /* c3-c9 */
+    tmp15 = tmp10 - MULTIPLY(tmp4, FIX(1.642452502));  /* c3+c9 */
+    tmp12 = MULTIPLY(tmp0 + tmp2, FIX(0.997307603));   /* c5 */
+    tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.765261039));   /* c7 */
+    tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.516244403)) /* c5+c7-c1 */
+	    + MULTIPLY(tmp5, FIX(0.164081699));        /* c11 */
+    tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.164081699)); /* -c11 */
+    tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.079550144)) /* c1+c5-c11 */
+	    + MULTIPLY(tmp5, FIX(0.765261039));        /* c7 */
+    tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.645144899)) /* c1+c11-c7 */
+	    - MULTIPLY(tmp5, FIX(0.997307603));        /* c5 */
+    tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.161389302)) /* c3 */
+	    - MULTIPLY(tmp2 + tmp5, FIX(0.481063200)); /* c9 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+    wsptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 5x10 sample block.
+ *
+ * 5-point FDCT in pass 1 (rows), 10-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_5x10 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4;
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14;
+  DCTELEM workspace[8*2];
+  DCTELEM *dataptr;
+  DCTELEM *wsptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* 5-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/10). */
+
+  dataptr = data;
+  ctr = 0;
+  for (;;) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[4]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[3]);
+    tmp2 = GETJSAMPLE(elemptr[2]);
+
+    tmp10 = tmp0 + tmp1;
+    tmp11 = tmp0 - tmp1;
+
+    tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[4]);
+    tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[3]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp10 + tmp2 - 5 * CENTERJSAMPLE) << PASS1_BITS);
+    tmp11 = MULTIPLY(tmp11, FIX(0.790569415));          /* (c2+c4)/2 */
+    tmp10 -= tmp2 << 2;
+    tmp10 = MULTIPLY(tmp10, FIX(0.353553391));          /* (c2-c4)/2 */
+    dataptr[2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS-PASS1_BITS);
+    dataptr[4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS-PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = MULTIPLY(tmp0 + tmp1, FIX(0.831253876));    /* c3 */
+
+    dataptr[1] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.513743148)), /* c1-c3 */
+	      CONST_BITS-PASS1_BITS);
+    dataptr[3] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.176250899)), /* c1+c3 */
+	      CONST_BITS-PASS1_BITS);
+
+    ctr++;
+
+    if (ctr != DCTSIZE) {
+      if (ctr == 10)
+	break;			/* Done. */
+      dataptr += DCTSIZE;	/* advance pointer to next row */
+    } else
+      dataptr = workspace;	/* switch pointer to extended workspace */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/5)*(8/10) = 32/25, which we
+   * fold into the constant multipliers:
+   * 10-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/20) * 32/25.
+   */
+
+  dataptr = data;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 5; ctr++) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*1];
+    tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*0];
+    tmp12 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*7];
+    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*6];
+    tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5];
+
+    tmp10 = tmp0 + tmp4;
+    tmp13 = tmp0 - tmp4;
+    tmp11 = tmp1 + tmp3;
+    tmp14 = tmp1 - tmp3;
+
+    tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*1];
+    tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*0];
+    tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*7];
+    tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*6];
+    tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(1.28)), /* 32/25 */
+	      CONST_BITS+PASS1_BITS);
+    tmp12 += tmp12;
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.464477191)) - /* c4 */
+	      MULTIPLY(tmp11 - tmp12, FIX(0.559380511)),  /* c8 */
+	      CONST_BITS+PASS1_BITS);
+    tmp10 = MULTIPLY(tmp13 + tmp14, FIX(1.064004961));    /* c6 */
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.657591230)),  /* c2-c6 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.785601151)),  /* c2+c6 */
+	      CONST_BITS+PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = tmp0 + tmp4;
+    tmp11 = tmp1 - tmp3;
+    dataptr[DCTSIZE*5] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp11 - tmp2, FIX(1.28)),  /* 32/25 */
+	      CONST_BITS+PASS1_BITS);
+    tmp2 = MULTIPLY(tmp2, FIX(1.28));                     /* 32/25 */
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0, FIX(1.787906876)) +          /* c1 */
+	      MULTIPLY(tmp1, FIX(1.612894094)) + tmp2 +   /* c3 */
+	      MULTIPLY(tmp3, FIX(0.821810588)) +          /* c7 */
+	      MULTIPLY(tmp4, FIX(0.283176630)),           /* c9 */
+	      CONST_BITS+PASS1_BITS);
+    tmp12 = MULTIPLY(tmp0 - tmp4, FIX(1.217352341)) -     /* (c3+c7)/2 */
+	    MULTIPLY(tmp1 + tmp3, FIX(0.752365123));      /* (c1-c9)/2 */
+    tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.395541753)) +   /* (c3-c7)/2 */
+	    MULTIPLY(tmp11, FIX(0.64)) - tmp2;            /* 16/25 */
+    dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+    wsptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 4x8 sample block.
+ *
+ * 4-point FDCT in pass 1 (rows), 8-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_4x8 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3;
+  INT32 tmp10, tmp11, tmp12, tmp13;
+  INT32 z1;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* We must also scale the output by 8/4 = 2, which we add here. */
+  /* 4-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). */
+
+  dataptr = data;
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]);
+
+    tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]);
+    tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+1));
+    dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+1));
+
+    /* Odd part */
+
+    tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100);       /* c6 */
+    /* Add fudge factor here for final descale. */
+    tmp0 += ONE << (CONST_BITS-PASS1_BITS-2);
+
+    dataptr[1] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */
+		  CONST_BITS-PASS1_BITS-1);
+    dataptr[3] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */
+		  CONST_BITS-PASS1_BITS-1);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 4; ctr++) {
+    /* Even part per LL&M figure 1 --- note that published figure is faulty;
+     * rotator "sqrt(2)*c1" should be "sqrt(2)*c6".
+     */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
+
+    /* Add fudge factor here for final descale. */
+    tmp10 = tmp0 + tmp3 + (ONE << (PASS1_BITS-1));
+    tmp12 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp13 = tmp1 - tmp2;
+
+    tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
+
+    dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp10 + tmp11, PASS1_BITS);
+    dataptr[DCTSIZE*4] = (DCTELEM) RIGHT_SHIFT(tmp10 - tmp11, PASS1_BITS);
+
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS+PASS1_BITS-1);
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*6] = (DCTELEM)
+      RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), CONST_BITS+PASS1_BITS);
+
+    /* Odd part per figure 8 --- note paper omits factor of sqrt(2).
+     * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16).
+     * i0..i3 in the paper are tmp0..tmp3 here.
+     */
+
+    tmp10 = tmp0 + tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp0 + tmp2;
+    tmp13 = tmp1 + tmp3;
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /*  c3 */
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS+PASS1_BITS-1);
+
+    tmp0  = MULTIPLY(tmp0,    FIX_1_501321110);    /*  c1+c3-c5-c7 */
+    tmp1  = MULTIPLY(tmp1,    FIX_3_072711026);    /*  c1+c3+c5-c7 */
+    tmp2  = MULTIPLY(tmp2,    FIX_2_053119869);    /*  c1+c3-c5+c7 */
+    tmp3  = MULTIPLY(tmp3,    FIX_0_298631336);    /* -c1+c3+c5-c7 */
+    tmp10 = MULTIPLY(tmp10, - FIX_0_899976223);    /*  c7-c3 */
+    tmp11 = MULTIPLY(tmp11, - FIX_2_562915447);    /* -c1-c3 */
+    tmp12 = MULTIPLY(tmp12, - FIX_0_390180644);    /*  c5-c3 */
+    tmp13 = MULTIPLY(tmp13, - FIX_1_961570560);    /* -c3-c5 */
+
+    tmp12 += z1;
+    tmp13 += z1;
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*5] = (DCTELEM)
+      RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*7] = (DCTELEM)
+      RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 3x6 sample block.
+ *
+ * 3-point FDCT in pass 1 (rows), 6-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_3x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1, tmp2;
+  INT32 tmp10, tmp11, tmp12;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+  /* We scale the results further by 2 as part of output adaption */
+  /* scaling for different DCT size. */
+  /* 3-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/6). */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 6; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[2]);
+    tmp1 = GETJSAMPLE(elemptr[1]);
+
+    tmp2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[2]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM)
+      ((tmp0 + tmp1 - 3 * CENTERJSAMPLE) << (PASS1_BITS+1));
+    dataptr[2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(0.707106781)), /* c2 */
+	      CONST_BITS-PASS1_BITS-1);
+
+    /* Odd part */
+
+    dataptr[1] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp2, FIX(1.224744871)),               /* c1 */
+	      CONST_BITS-PASS1_BITS-1);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   * We must also scale the output by (8/6)*(8/3) = 32/9, which we partially
+   * fold into the constant multipliers (other part was done in pass 1):
+   * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12) * 16/9.
+   */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 3; ctr++) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5];
+    tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3];
+
+    tmp10 = tmp0 + tmp2;
+    tmp12 = tmp0 - tmp2;
+
+    tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5];
+    tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4];
+    tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3];
+
+    dataptr[DCTSIZE*0] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)),         /* 16/9 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*2] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp12, FIX(2.177324216)),                 /* c2 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*4] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */
+	      CONST_BITS+PASS1_BITS);
+
+    /* Odd part */
+
+    tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829));             /* c5 */
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)),   /* 16/9 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)),    /* 16/9 */
+	      CONST_BITS+PASS1_BITS);
+    dataptr[DCTSIZE*5] = (DCTELEM)
+      DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)),   /* 16/9 */
+	      CONST_BITS+PASS1_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 2x4 sample block.
+ *
+ * 2-point FDCT in pass 1 (rows), 4-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_2x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1;
+  INT32 tmp10, tmp11;
+  DCTELEM *dataptr;
+  JSAMPROW elemptr;
+  int ctr;
+  SHIFT_TEMPS
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT. */
+  /* We must also scale the output by (8/2)*(8/4) = 2**3, which we add here. */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 4; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Even part */
+
+    tmp0 = GETJSAMPLE(elemptr[0]);
+    tmp1 = GETJSAMPLE(elemptr[1]);
+
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 3);
+
+    /* Odd part */
+
+    dataptr[1] = (DCTELEM) ((tmp0 - tmp1) << 3);
+
+    dataptr += DCTSIZE;		/* advance pointer to next row */
+  }
+
+  /* Pass 2: process columns.
+   * We leave the results scaled up by an overall factor of 8.
+   * 4-point FDCT kernel,
+   * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT].
+   */
+
+  dataptr = data;
+  for (ctr = 0; ctr < 2; ctr++) {
+    /* Even part */
+
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2];
+
+    tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3];
+    tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2];
+
+    dataptr[DCTSIZE*0] = (DCTELEM) (tmp0 + tmp1);
+    dataptr[DCTSIZE*2] = (DCTELEM) (tmp0 - tmp1);
+
+    /* Odd part */
+
+    tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100);       /* c6 */
+    /* Add fudge factor here for final descale. */
+    tmp0 += ONE << (CONST_BITS-1);
+
+    dataptr[DCTSIZE*1] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */
+		  CONST_BITS);
+    dataptr[DCTSIZE*3] = (DCTELEM)
+      RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */
+		  CONST_BITS);
+
+    dataptr++;			/* advance pointer to next column */
+  }
+}
+
+
+/*
+ * Perform the forward DCT on a 1x2 sample block.
+ *
+ * 1-point FDCT in pass 1 (rows), 2-point in pass 2 (columns).
+ */
+
+GLOBAL(void)
+jpeg_fdct_1x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
+{
+  INT32 tmp0, tmp1;
+
+  /* Pre-zero output coefficient block. */
+  MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2);
+
+  tmp0 = GETJSAMPLE(sample_data[0][start_col]);
+  tmp1 = GETJSAMPLE(sample_data[1][start_col]);
+
+  /* We leave the results scaled up by an overall factor of 8.
+   * We must also scale the output by (8/1)*(8/2) = 2**5.
+   */
+
+  /* Even part */
+  /* Apply unsigned->signed conversion */
+  data[DCTSIZE*0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 5);
+
+  /* Odd part */
+  data[DCTSIZE*1] = (DCTELEM) ((tmp0 - tmp1) << 5);
+}
+
+#endif /* DCT_SCALING_SUPPORTED */
+#endif /* DCT_ISLOW_SUPPORTED */
diff --git a/jpeg-8d/jidctflt.c b/jpeg-8d/jidctflt.c
new file mode 100644
index 0000000..23ae9d3
--- /dev/null
+++ b/jpeg-8d/jidctflt.c
@@ -0,0 +1,235 @@
+/*
+ * jidctflt.c
+ *
+ * Copyright (C) 1994-1998, Thomas G. Lane.
+ * Modified 2010 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a floating-point implementation of the
+ * inverse DCT (Discrete Cosine Transform).  In the IJG code, this routine
+ * must also perform dequantization of the input coefficients.
+ *
+ * This implementation should be more accurate than either of the integer
+ * IDCT implementations.  However, it may not give the same results on all
+ * machines because of differences in roundoff behavior.  Speed will depend
+ * on the hardware's floating point capacity.
+ *
+ * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT
+ * on each row (or vice versa, but it's more convenient to emit a row at
+ * a time).  Direct algorithms are also available, but they are much more
+ * complex and seem not to be any faster when reduced to code.
+ *
+ * This implementation is based on Arai, Agui, and Nakajima's algorithm for
+ * scaled DCT.  Their original paper (Trans. IEICE E-71(11):1095) is in
+ * Japanese, but the algorithm is described in the Pennebaker & Mitchell
+ * JPEG textbook (see REFERENCES section in file README).  The following code
+ * is based directly on figure 4-8 in P&M.
+ * While an 8-point DCT cannot be done in less than 11 multiplies, it is
+ * possible to arrange the computation so that many of the multiplies are
+ * simple scalings of the final outputs.  These multiplies can then be
+ * folded into the multiplications or divisions by the JPEG quantization
+ * table entries.  The AA&N method leaves only 5 multiplies and 29 adds
+ * to be done in the DCT itself.
+ * The primary disadvantage of this method is that with a fixed-point
+ * implementation, accuracy is lost due to imprecise representation of the
+ * scaled quantization values.  However, that problem does not arise if
+ * we use floating point arithmetic.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+#ifdef DCT_FLOAT_SUPPORTED
+
+
+/*
+ * This module is specialized to the case DCTSIZE = 8.
+ */
+
+#if DCTSIZE != 8
+  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+#endif
+
+
+/* Dequantize a coefficient by multiplying it by the multiplier-table
+ * entry; produce a float result.
+ */
+
+#define DEQUANTIZE(coef,quantval)  (((FAST_FLOAT) (coef)) * (quantval))
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients.
+ */
+
+GLOBAL(void)
+jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JCOEFPTR coef_block,
+		 JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+  FAST_FLOAT tmp10, tmp11, tmp12, tmp13;
+  FAST_FLOAT z5, z10, z11, z12, z13;
+  JCOEFPTR inptr;
+  FLOAT_MULT_TYPE * quantptr;
+  FAST_FLOAT * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = cinfo->sample_range_limit;
+  int ctr;
+  FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (FLOAT_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = DCTSIZE; ctr > 0; ctr--) {
+    /* Due to quantization, we will usually find that many of the input
+     * coefficients are zero, especially the AC terms.  We can exploit this
+     * by short-circuiting the IDCT calculation for any column in which all
+     * the AC terms are zero.  In that case each output is equal to the
+     * DC coefficient (with scale factor as needed).
+     * With typical images and quantization tables, half or more of the
+     * column DCT calculations can be simplified this way.
+     */
+    
+    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
+	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
+	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
+	inptr[DCTSIZE*7] == 0) {
+      /* AC terms all zero */
+      FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+      
+      wsptr[DCTSIZE*0] = dcval;
+      wsptr[DCTSIZE*1] = dcval;
+      wsptr[DCTSIZE*2] = dcval;
+      wsptr[DCTSIZE*3] = dcval;
+      wsptr[DCTSIZE*4] = dcval;
+      wsptr[DCTSIZE*5] = dcval;
+      wsptr[DCTSIZE*6] = dcval;
+      wsptr[DCTSIZE*7] = dcval;
+      
+      inptr++;			/* advance pointers to next column */
+      quantptr++;
+      wsptr++;
+      continue;
+    }
+    
+    /* Even part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    tmp10 = tmp0 + tmp2;	/* phase 3 */
+    tmp11 = tmp0 - tmp2;
+
+    tmp13 = tmp1 + tmp3;	/* phases 5-3 */
+    tmp12 = (tmp1 - tmp3) * ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */
+
+    tmp0 = tmp10 + tmp13;	/* phase 2 */
+    tmp3 = tmp10 - tmp13;
+    tmp1 = tmp11 + tmp12;
+    tmp2 = tmp11 - tmp12;
+    
+    /* Odd part */
+
+    tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+
+    z13 = tmp6 + tmp5;		/* phase 6 */
+    z10 = tmp6 - tmp5;
+    z11 = tmp4 + tmp7;
+    z12 = tmp4 - tmp7;
+
+    tmp7 = z11 + z13;		/* phase 5 */
+    tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */
+
+    z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */
+    tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */
+    tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */
+
+    tmp6 = tmp12 - tmp7;	/* phase 2 */
+    tmp5 = tmp11 - tmp6;
+    tmp4 = tmp10 - tmp5;
+
+    wsptr[DCTSIZE*0] = tmp0 + tmp7;
+    wsptr[DCTSIZE*7] = tmp0 - tmp7;
+    wsptr[DCTSIZE*1] = tmp1 + tmp6;
+    wsptr[DCTSIZE*6] = tmp1 - tmp6;
+    wsptr[DCTSIZE*2] = tmp2 + tmp5;
+    wsptr[DCTSIZE*5] = tmp2 - tmp5;
+    wsptr[DCTSIZE*3] = tmp3 + tmp4;
+    wsptr[DCTSIZE*4] = tmp3 - tmp4;
+
+    inptr++;			/* advance pointers to next column */
+    quantptr++;
+    wsptr++;
+  }
+  
+  /* Pass 2: process rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+    /* Rows of zeroes can be exploited in the same way as we did with columns.
+     * However, the column calculation has created many nonzero AC terms, so
+     * the simplification applies less often (typically 5% to 10% of the time).
+     * And testing floats for zero is relatively expensive, so we don't bother.
+     */
+    
+    /* Even part */
+
+    /* Apply signed->unsigned and prepare float->int conversion */
+    z5 = wsptr[0] + ((FAST_FLOAT) CENTERJSAMPLE + (FAST_FLOAT) 0.5);
+    tmp10 = z5 + wsptr[4];
+    tmp11 = z5 - wsptr[4];
+
+    tmp13 = wsptr[2] + wsptr[6];
+    tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13;
+
+    tmp0 = tmp10 + tmp13;
+    tmp3 = tmp10 - tmp13;
+    tmp1 = tmp11 + tmp12;
+    tmp2 = tmp11 - tmp12;
+
+    /* Odd part */
+
+    z13 = wsptr[5] + wsptr[3];
+    z10 = wsptr[5] - wsptr[3];
+    z11 = wsptr[1] + wsptr[7];
+    z12 = wsptr[1] - wsptr[7];
+
+    tmp7 = z11 + z13;
+    tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562);
+
+    z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */
+    tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */
+    tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */
+
+    tmp6 = tmp12 - tmp7;
+    tmp5 = tmp11 - tmp6;
+    tmp4 = tmp10 - tmp5;
+
+    /* Final output stage: float->int conversion and range-limit */
+
+    outptr[0] = range_limit[((int) (tmp0 + tmp7)) & RANGE_MASK];
+    outptr[7] = range_limit[((int) (tmp0 - tmp7)) & RANGE_MASK];
+    outptr[1] = range_limit[((int) (tmp1 + tmp6)) & RANGE_MASK];
+    outptr[6] = range_limit[((int) (tmp1 - tmp6)) & RANGE_MASK];
+    outptr[2] = range_limit[((int) (tmp2 + tmp5)) & RANGE_MASK];
+    outptr[5] = range_limit[((int) (tmp2 - tmp5)) & RANGE_MASK];
+    outptr[3] = range_limit[((int) (tmp3 + tmp4)) & RANGE_MASK];
+    outptr[4] = range_limit[((int) (tmp3 - tmp4)) & RANGE_MASK];
+    
+    wsptr += DCTSIZE;		/* advance pointer to next row */
+  }
+}
+
+#endif /* DCT_FLOAT_SUPPORTED */
diff --git a/jpeg-8d/jidctfst.c b/jpeg-8d/jidctfst.c
new file mode 100644
index 0000000..dba4216
--- /dev/null
+++ b/jpeg-8d/jidctfst.c
@@ -0,0 +1,368 @@
+/*
+ * jidctfst.c
+ *
+ * Copyright (C) 1994-1998, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a fast, not so accurate integer implementation of the
+ * inverse DCT (Discrete Cosine Transform).  In the IJG code, this routine
+ * must also perform dequantization of the input coefficients.
+ *
+ * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT
+ * on each row (or vice versa, but it's more convenient to emit a row at
+ * a time).  Direct algorithms are also available, but they are much more
+ * complex and seem not to be any faster when reduced to code.
+ *
+ * This implementation is based on Arai, Agui, and Nakajima's algorithm for
+ * scaled DCT.  Their original paper (Trans. IEICE E-71(11):1095) is in
+ * Japanese, but the algorithm is described in the Pennebaker & Mitchell
+ * JPEG textbook (see REFERENCES section in file README).  The following code
+ * is based directly on figure 4-8 in P&M.
+ * While an 8-point DCT cannot be done in less than 11 multiplies, it is
+ * possible to arrange the computation so that many of the multiplies are
+ * simple scalings of the final outputs.  These multiplies can then be
+ * folded into the multiplications or divisions by the JPEG quantization
+ * table entries.  The AA&N method leaves only 5 multiplies and 29 adds
+ * to be done in the DCT itself.
+ * The primary disadvantage of this method is that with fixed-point math,
+ * accuracy is lost due to imprecise representation of the scaled
+ * quantization values.  The smaller the quantization table entry, the less
+ * precise the scaled value, so this implementation does worse with high-
+ * quality-setting files than with low-quality ones.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+#ifdef DCT_IFAST_SUPPORTED
+
+
+/*
+ * This module is specialized to the case DCTSIZE = 8.
+ */
+
+#if DCTSIZE != 8
+  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+#endif
+
+
+/* Scaling decisions are generally the same as in the LL&M algorithm;
+ * see jidctint.c for more details.  However, we choose to descale
+ * (right shift) multiplication products as soon as they are formed,
+ * rather than carrying additional fractional bits into subsequent additions.
+ * This compromises accuracy slightly, but it lets us save a few shifts.
+ * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples)
+ * everywhere except in the multiplications proper; this saves a good deal
+ * of work on 16-bit-int machines.
+ *
+ * The dequantized coefficients are not integers because the AA&N scaling
+ * factors have been incorporated.  We represent them scaled up by PASS1_BITS,
+ * so that the first and second IDCT rounds have the same input scaling.
+ * For 8-bit JSAMPLEs, we choose IFAST_SCALE_BITS = PASS1_BITS so as to
+ * avoid a descaling shift; this compromises accuracy rather drastically
+ * for small quantization table entries, but it saves a lot of shifts.
+ * For 12-bit JSAMPLEs, there's no hope of using 16x16 multiplies anyway,
+ * so we use a much larger scaling factor to preserve accuracy.
+ *
+ * A final compromise is to represent the multiplicative constants to only
+ * 8 fractional bits, rather than 13.  This saves some shifting work on some
+ * machines, and may also reduce the cost of multiplication (since there
+ * are fewer one-bits in the constants).
+ */
+
+#if BITS_IN_JSAMPLE == 8
+#define CONST_BITS  8
+#define PASS1_BITS  2
+#else
+#define CONST_BITS  8
+#define PASS1_BITS  1		/* lose a little precision to avoid overflow */
+#endif
+
+/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
+ * causing a lot of useless floating-point operations at run time.
+ * To get around this we use the following pre-calculated constants.
+ * If you change CONST_BITS you may want to add appropriate values.
+ * (With a reasonable C compiler, you can just rely on the FIX() macro...)
+ */
+
+#if CONST_BITS == 8
+#define FIX_1_082392200  ((INT32)  277)		/* FIX(1.082392200) */
+#define FIX_1_414213562  ((INT32)  362)		/* FIX(1.414213562) */
+#define FIX_1_847759065  ((INT32)  473)		/* FIX(1.847759065) */
+#define FIX_2_613125930  ((INT32)  669)		/* FIX(2.613125930) */
+#else
+#define FIX_1_082392200  FIX(1.082392200)
+#define FIX_1_414213562  FIX(1.414213562)
+#define FIX_1_847759065  FIX(1.847759065)
+#define FIX_2_613125930  FIX(2.613125930)
+#endif
+
+
+/* We can gain a little more speed, with a further compromise in accuracy,
+ * by omitting the addition in a descaling shift.  This yields an incorrectly
+ * rounded result half the time...
+ */
+
+#ifndef USE_ACCURATE_ROUNDING
+#undef DESCALE
+#define DESCALE(x,n)  RIGHT_SHIFT(x, n)
+#endif
+
+
+/* Multiply a DCTELEM variable by an INT32 constant, and immediately
+ * descale to yield a DCTELEM result.
+ */
+
+#define MULTIPLY(var,const)  ((DCTELEM) DESCALE((var) * (const), CONST_BITS))
+
+
+/* Dequantize a coefficient by multiplying it by the multiplier-table
+ * entry; produce a DCTELEM result.  For 8-bit data a 16x16->16
+ * multiplication will do.  For 12-bit data, the multiplier table is
+ * declared INT32, so a 32-bit multiply will be used.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+#define DEQUANTIZE(coef,quantval)  (((IFAST_MULT_TYPE) (coef)) * (quantval))
+#else
+#define DEQUANTIZE(coef,quantval)  \
+	DESCALE((coef)*(quantval), IFAST_SCALE_BITS-PASS1_BITS)
+#endif
+
+
+/* Like DESCALE, but applies to a DCTELEM and produces an int.
+ * We assume that int right shift is unsigned if INT32 right shift is.
+ */
+
+#ifdef RIGHT_SHIFT_IS_UNSIGNED
+#define ISHIFT_TEMPS	DCTELEM ishift_temp;
+#if BITS_IN_JSAMPLE == 8
+#define DCTELEMBITS  16		/* DCTELEM may be 16 or 32 bits */
+#else
+#define DCTELEMBITS  32		/* DCTELEM must be 32 bits */
+#endif
+#define IRIGHT_SHIFT(x,shft)  \
+    ((ishift_temp = (x)) < 0 ? \
+     (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \
+     (ishift_temp >> (shft)))
+#else
+#define ISHIFT_TEMPS
+#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
+#endif
+
+#ifdef USE_ACCURATE_ROUNDING
+#define IDESCALE(x,n)  ((int) IRIGHT_SHIFT((x) + (1 << ((n)-1)), n))
+#else
+#define IDESCALE(x,n)  ((int) IRIGHT_SHIFT(x, n))
+#endif
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients.
+ */
+
+GLOBAL(void)
+jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JCOEFPTR coef_block,
+		 JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+  DCTELEM tmp10, tmp11, tmp12, tmp13;
+  DCTELEM z5, z10, z11, z12, z13;
+  JCOEFPTR inptr;
+  IFAST_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[DCTSIZE2];	/* buffers data between passes */
+  SHIFT_TEMPS			/* for DESCALE */
+  ISHIFT_TEMPS			/* for IDESCALE */
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (IFAST_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = DCTSIZE; ctr > 0; ctr--) {
+    /* Due to quantization, we will usually find that many of the input
+     * coefficients are zero, especially the AC terms.  We can exploit this
+     * by short-circuiting the IDCT calculation for any column in which all
+     * the AC terms are zero.  In that case each output is equal to the
+     * DC coefficient (with scale factor as needed).
+     * With typical images and quantization tables, half or more of the
+     * column DCT calculations can be simplified this way.
+     */
+    
+    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
+	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
+	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
+	inptr[DCTSIZE*7] == 0) {
+      /* AC terms all zero */
+      int dcval = (int) DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+
+      wsptr[DCTSIZE*0] = dcval;
+      wsptr[DCTSIZE*1] = dcval;
+      wsptr[DCTSIZE*2] = dcval;
+      wsptr[DCTSIZE*3] = dcval;
+      wsptr[DCTSIZE*4] = dcval;
+      wsptr[DCTSIZE*5] = dcval;
+      wsptr[DCTSIZE*6] = dcval;
+      wsptr[DCTSIZE*7] = dcval;
+      
+      inptr++;			/* advance pointers to next column */
+      quantptr++;
+      wsptr++;
+      continue;
+    }
+    
+    /* Even part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    tmp10 = tmp0 + tmp2;	/* phase 3 */
+    tmp11 = tmp0 - tmp2;
+
+    tmp13 = tmp1 + tmp3;	/* phases 5-3 */
+    tmp12 = MULTIPLY(tmp1 - tmp3, FIX_1_414213562) - tmp13; /* 2*c4 */
+
+    tmp0 = tmp10 + tmp13;	/* phase 2 */
+    tmp3 = tmp10 - tmp13;
+    tmp1 = tmp11 + tmp12;
+    tmp2 = tmp11 - tmp12;
+    
+    /* Odd part */
+
+    tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+
+    z13 = tmp6 + tmp5;		/* phase 6 */
+    z10 = tmp6 - tmp5;
+    z11 = tmp4 + tmp7;
+    z12 = tmp4 - tmp7;
+
+    tmp7 = z11 + z13;		/* phase 5 */
+    tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */
+
+    z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */
+    tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */
+    tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */
+
+    tmp6 = tmp12 - tmp7;	/* phase 2 */
+    tmp5 = tmp11 - tmp6;
+    tmp4 = tmp10 + tmp5;
+
+    wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7);
+    wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7);
+    wsptr[DCTSIZE*1] = (int) (tmp1 + tmp6);
+    wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6);
+    wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5);
+    wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5);
+    wsptr[DCTSIZE*4] = (int) (tmp3 + tmp4);
+    wsptr[DCTSIZE*3] = (int) (tmp3 - tmp4);
+
+    inptr++;			/* advance pointers to next column */
+    quantptr++;
+    wsptr++;
+  }
+  
+  /* Pass 2: process rows from work array, store into output array. */
+  /* Note that we must descale the results by a factor of 8 == 2**3, */
+  /* and also undo the PASS1_BITS scaling. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+    /* Rows of zeroes can be exploited in the same way as we did with columns.
+     * However, the column calculation has created many nonzero AC terms, so
+     * the simplification applies less often (typically 5% to 10% of the time).
+     * On machines with very fast multiplication, it's possible that the
+     * test takes more time than it's worth.  In that case this section
+     * may be commented out.
+     */
+    
+#ifndef NO_ZERO_ROW_TEST
+    if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 &&
+	wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) {
+      /* AC terms all zero */
+      JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3)
+				  & RANGE_MASK];
+      
+      outptr[0] = dcval;
+      outptr[1] = dcval;
+      outptr[2] = dcval;
+      outptr[3] = dcval;
+      outptr[4] = dcval;
+      outptr[5] = dcval;
+      outptr[6] = dcval;
+      outptr[7] = dcval;
+
+      wsptr += DCTSIZE;		/* advance pointer to next row */
+      continue;
+    }
+#endif
+    
+    /* Even part */
+
+    tmp10 = ((DCTELEM) wsptr[0] + (DCTELEM) wsptr[4]);
+    tmp11 = ((DCTELEM) wsptr[0] - (DCTELEM) wsptr[4]);
+
+    tmp13 = ((DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]);
+    tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], FIX_1_414213562)
+	    - tmp13;
+
+    tmp0 = tmp10 + tmp13;
+    tmp3 = tmp10 - tmp13;
+    tmp1 = tmp11 + tmp12;
+    tmp2 = tmp11 - tmp12;
+
+    /* Odd part */
+
+    z13 = (DCTELEM) wsptr[5] + (DCTELEM) wsptr[3];
+    z10 = (DCTELEM) wsptr[5] - (DCTELEM) wsptr[3];
+    z11 = (DCTELEM) wsptr[1] + (DCTELEM) wsptr[7];
+    z12 = (DCTELEM) wsptr[1] - (DCTELEM) wsptr[7];
+
+    tmp7 = z11 + z13;		/* phase 5 */
+    tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */
+
+    z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */
+    tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */
+    tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */
+
+    tmp6 = tmp12 - tmp7;	/* phase 2 */
+    tmp5 = tmp11 - tmp6;
+    tmp4 = tmp10 + tmp5;
+
+    /* Final output stage: scale down by a factor of 8 and range-limit */
+
+    outptr[0] = range_limit[IDESCALE(tmp0 + tmp7, PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[7] = range_limit[IDESCALE(tmp0 - tmp7, PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[IDESCALE(tmp1 + tmp6, PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[6] = range_limit[IDESCALE(tmp1 - tmp6, PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[IDESCALE(tmp2 + tmp5, PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[5] = range_limit[IDESCALE(tmp2 - tmp5, PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[IDESCALE(tmp3 + tmp4, PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[IDESCALE(tmp3 - tmp4, PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += DCTSIZE;		/* advance pointer to next row */
+  }
+}
+
+#endif /* DCT_IFAST_SUPPORTED */
diff --git a/jpeg-8d/jidctint.c b/jpeg-8d/jidctint.c
new file mode 100644
index 0000000..dcdf7ce
--- /dev/null
+++ b/jpeg-8d/jidctint.c
@@ -0,0 +1,5137 @@
+/*
+ * jidctint.c
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modification developed 2002-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a slow-but-accurate integer implementation of the
+ * inverse DCT (Discrete Cosine Transform).  In the IJG code, this routine
+ * must also perform dequantization of the input coefficients.
+ *
+ * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT
+ * on each row (or vice versa, but it's more convenient to emit a row at
+ * a time).  Direct algorithms are also available, but they are much more
+ * complex and seem not to be any faster when reduced to code.
+ *
+ * This implementation is based on an algorithm described in
+ *   C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT
+ *   Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics,
+ *   Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991.
+ * The primary algorithm described there uses 11 multiplies and 29 adds.
+ * We use their alternate method with 12 multiplies and 32 adds.
+ * The advantage of this method is that no data path contains more than one
+ * multiplication; this allows a very simple and accurate implementation in
+ * scaled fixed-point arithmetic, with a minimal number of shifts.
+ *
+ * We also provide IDCT routines with various output sample block sizes for
+ * direct resolution reduction or enlargement and for direct resolving the
+ * common 2x1 and 1x2 subsampling cases without additional resampling: NxN
+ * (N=1...16), 2NxN, and Nx2N (N=1...8) pixels for one 8x8 input DCT block.
+ *
+ * For N<8 we simply take the corresponding low-frequency coefficients of
+ * the 8x8 input DCT block and apply an NxN point IDCT on the sub-block
+ * to yield the downscaled outputs.
+ * This can be seen as direct low-pass downsampling from the DCT domain
+ * point of view rather than the usual spatial domain point of view,
+ * yielding significant computational savings and results at least
+ * as good as common bilinear (averaging) spatial downsampling.
+ *
+ * For N>8 we apply a partial NxN IDCT on the 8 input coefficients as
+ * lower frequencies and higher frequencies assumed to be zero.
+ * It turns out that the computational effort is similar to the 8x8 IDCT
+ * regarding the output size.
+ * Furthermore, the scaling and descaling is the same for all IDCT sizes.
+ *
+ * CAUTION: We rely on the FIX() macro except for the N=1,2,4,8 cases
+ * since there would be too many additional constants to pre-calculate.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdct.h"		/* Private declarations for DCT subsystem */
+
+#ifdef DCT_ISLOW_SUPPORTED
+
+
+/*
+ * This module is specialized to the case DCTSIZE = 8.
+ */
+
+#if DCTSIZE != 8
+  Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */
+#endif
+
+
+/*
+ * The poop on this scaling stuff is as follows:
+ *
+ * Each 1-D IDCT step produces outputs which are a factor of sqrt(N)
+ * larger than the true IDCT outputs.  The final outputs are therefore
+ * a factor of N larger than desired; since N=8 this can be cured by
+ * a simple right shift at the end of the algorithm.  The advantage of
+ * this arrangement is that we save two multiplications per 1-D IDCT,
+ * because the y0 and y4 inputs need not be divided by sqrt(N).
+ *
+ * We have to do addition and subtraction of the integer inputs, which
+ * is no problem, and multiplication by fractional constants, which is
+ * a problem to do in integer arithmetic.  We multiply all the constants
+ * by CONST_SCALE and convert them to integer constants (thus retaining
+ * CONST_BITS bits of precision in the constants).  After doing a
+ * multiplication we have to divide the product by CONST_SCALE, with proper
+ * rounding, to produce the correct output.  This division can be done
+ * cheaply as a right shift of CONST_BITS bits.  We postpone shifting
+ * as long as possible so that partial sums can be added together with
+ * full fractional precision.
+ *
+ * The outputs of the first pass are scaled up by PASS1_BITS bits so that
+ * they are represented to better-than-integral precision.  These outputs
+ * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word
+ * with the recommended scaling.  (To scale up 12-bit sample data further, an
+ * intermediate INT32 array would be needed.)
+ *
+ * To avoid overflow of the 32-bit intermediate results in pass 2, we must
+ * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26.  Error analysis
+ * shows that the values given below are the most effective.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+#define CONST_BITS  13
+#define PASS1_BITS  2
+#else
+#define CONST_BITS  13
+#define PASS1_BITS  1		/* lose a little precision to avoid overflow */
+#endif
+
+/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
+ * causing a lot of useless floating-point operations at run time.
+ * To get around this we use the following pre-calculated constants.
+ * If you change CONST_BITS you may want to add appropriate values.
+ * (With a reasonable C compiler, you can just rely on the FIX() macro...)
+ */
+
+#if CONST_BITS == 13
+#define FIX_0_298631336  ((INT32)  2446)	/* FIX(0.298631336) */
+#define FIX_0_390180644  ((INT32)  3196)	/* FIX(0.390180644) */
+#define FIX_0_541196100  ((INT32)  4433)	/* FIX(0.541196100) */
+#define FIX_0_765366865  ((INT32)  6270)	/* FIX(0.765366865) */
+#define FIX_0_899976223  ((INT32)  7373)	/* FIX(0.899976223) */
+#define FIX_1_175875602  ((INT32)  9633)	/* FIX(1.175875602) */
+#define FIX_1_501321110  ((INT32)  12299)	/* FIX(1.501321110) */
+#define FIX_1_847759065  ((INT32)  15137)	/* FIX(1.847759065) */
+#define FIX_1_961570560  ((INT32)  16069)	/* FIX(1.961570560) */
+#define FIX_2_053119869  ((INT32)  16819)	/* FIX(2.053119869) */
+#define FIX_2_562915447  ((INT32)  20995)	/* FIX(2.562915447) */
+#define FIX_3_072711026  ((INT32)  25172)	/* FIX(3.072711026) */
+#else
+#define FIX_0_298631336  FIX(0.298631336)
+#define FIX_0_390180644  FIX(0.390180644)
+#define FIX_0_541196100  FIX(0.541196100)
+#define FIX_0_765366865  FIX(0.765366865)
+#define FIX_0_899976223  FIX(0.899976223)
+#define FIX_1_175875602  FIX(1.175875602)
+#define FIX_1_501321110  FIX(1.501321110)
+#define FIX_1_847759065  FIX(1.847759065)
+#define FIX_1_961570560  FIX(1.961570560)
+#define FIX_2_053119869  FIX(2.053119869)
+#define FIX_2_562915447  FIX(2.562915447)
+#define FIX_3_072711026  FIX(3.072711026)
+#endif
+
+
+/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result.
+ * For 8-bit samples with the recommended scaling, all the variable
+ * and constant values involved are no more than 16 bits wide, so a
+ * 16x16->32 bit multiply can be used instead of a full 32x32 multiply.
+ * For 12-bit samples, a full 32-bit multiplication will be needed.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+#define MULTIPLY(var,const)  MULTIPLY16C16(var,const)
+#else
+#define MULTIPLY(var,const)  ((var) * (const))
+#endif
+
+
+/* Dequantize a coefficient by multiplying it by the multiplier-table
+ * entry; produce an int result.  In this module, both inputs and result
+ * are 16 bits or less, so either int or short multiply will work.
+ */
+
+#define DEQUANTIZE(coef,quantval)  (((ISLOW_MULT_TYPE) (coef)) * (quantval))
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients.
+ */
+
+GLOBAL(void)
+jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JCOEFPTR coef_block,
+		 JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3;
+  INT32 tmp10, tmp11, tmp12, tmp13;
+  INT32 z1, z2, z3;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[DCTSIZE2];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+  /* Note results are scaled up by sqrt(8) compared to a true IDCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = DCTSIZE; ctr > 0; ctr--) {
+    /* Due to quantization, we will usually find that many of the input
+     * coefficients are zero, especially the AC terms.  We can exploit this
+     * by short-circuiting the IDCT calculation for any column in which all
+     * the AC terms are zero.  In that case each output is equal to the
+     * DC coefficient (with scale factor as needed).
+     * With typical images and quantization tables, half or more of the
+     * column DCT calculations can be simplified this way.
+     */
+
+    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
+	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
+	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
+	inptr[DCTSIZE*7] == 0) {
+      /* AC terms all zero */
+      int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
+
+      wsptr[DCTSIZE*0] = dcval;
+      wsptr[DCTSIZE*1] = dcval;
+      wsptr[DCTSIZE*2] = dcval;
+      wsptr[DCTSIZE*3] = dcval;
+      wsptr[DCTSIZE*4] = dcval;
+      wsptr[DCTSIZE*5] = dcval;
+      wsptr[DCTSIZE*6] = dcval;
+      wsptr[DCTSIZE*7] = dcval;
+
+      inptr++;			/* advance pointers to next column */
+      quantptr++;
+      wsptr++;
+      continue;
+    }
+
+    /* Even part: reverse the even part of the forward DCT. */
+    /* The rotator is sqrt(2)*c(-6). */
+    
+    z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    z1 = MULTIPLY(z2 + z3, FIX_0_541196100);
+    tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865);
+    tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065);
+
+    z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z2 <<= CONST_BITS;
+    z3 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    z2 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    tmp0 = z2 + z3;
+    tmp1 = z2 - z3;
+
+    tmp10 = tmp0 + tmp2;
+    tmp13 = tmp0 - tmp2;
+    tmp11 = tmp1 + tmp3;
+    tmp12 = tmp1 - tmp3;
+
+    /* Odd part per figure 8; the matrix is unitary and hence its
+     * transpose is its inverse.  i0..i3 are y7,y5,y3,y1 respectively.
+     */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+    tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    
+    z2 = tmp0 + tmp2;
+    z3 = tmp1 + tmp3;
+
+    z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */
+    z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
+    z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
+    z2 += z1;
+    z3 += z1;
+
+    z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
+    tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
+    tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
+    tmp0 += z1 + z2;
+    tmp3 += z1 + z3;
+
+    z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
+    tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
+    tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
+    tmp1 += z1 + z3;
+    tmp2 += z1 + z2;
+
+    /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */
+
+    wsptr[DCTSIZE*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS);
+    
+    inptr++;			/* advance pointers to next column */
+    quantptr++;
+    wsptr++;
+  }
+
+  /* Pass 2: process rows from work array, store into output array. */
+  /* Note that we must descale the results by a factor of 8 == 2**3, */
+  /* and also undo the PASS1_BITS scaling. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+    /* Rows of zeroes can be exploited in the same way as we did with columns.
+     * However, the column calculation has created many nonzero AC terms, so
+     * the simplification applies less often (typically 5% to 10% of the time).
+     * On machines with very fast multiplication, it's possible that the
+     * test takes more time than it's worth.  In that case this section
+     * may be commented out.
+     */
+
+#ifndef NO_ZERO_ROW_TEST
+    if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 &&
+	wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) {
+      /* AC terms all zero */
+      JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3)
+				  & RANGE_MASK];
+
+      outptr[0] = dcval;
+      outptr[1] = dcval;
+      outptr[2] = dcval;
+      outptr[3] = dcval;
+      outptr[4] = dcval;
+      outptr[5] = dcval;
+      outptr[6] = dcval;
+      outptr[7] = dcval;
+
+      wsptr += DCTSIZE;		/* advance pointer to next row */
+      continue;
+    }
+#endif
+
+    /* Even part: reverse the even part of the forward DCT. */
+    /* The rotator is sqrt(2)*c(-6). */
+    
+    z2 = (INT32) wsptr[2];
+    z3 = (INT32) wsptr[6];
+
+    z1 = MULTIPLY(z2 + z3, FIX_0_541196100);
+    tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865);
+    tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065);
+
+    /* Add fudge factor here for final descale. */
+    z2 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    z3 = (INT32) wsptr[4];
+
+    tmp0 = (z2 + z3) << CONST_BITS;
+    tmp1 = (z2 - z3) << CONST_BITS;
+    
+    tmp10 = tmp0 + tmp2;
+    tmp13 = tmp0 - tmp2;
+    tmp11 = tmp1 + tmp3;
+    tmp12 = tmp1 - tmp3;
+
+    /* Odd part per figure 8; the matrix is unitary and hence its
+     * transpose is its inverse.  i0..i3 are y7,y5,y3,y1 respectively.
+     */
+
+    tmp0 = (INT32) wsptr[7];
+    tmp1 = (INT32) wsptr[5];
+    tmp2 = (INT32) wsptr[3];
+    tmp3 = (INT32) wsptr[1];
+
+    z2 = tmp0 + tmp2;
+    z3 = tmp1 + tmp3;
+
+    z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */
+    z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
+    z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
+    z2 += z1;
+    z3 += z1;
+
+    z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
+    tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
+    tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
+    tmp0 += z1 + z2;
+    tmp3 += z1 + z3;
+
+    z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
+    tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
+    tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
+    tmp1 += z1 + z3;
+    tmp2 += z1 + z2;
+
+    /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += DCTSIZE;		/* advance pointer to next row */
+  }
+}
+
+#ifdef IDCT_SCALING_SUPPORTED
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 7x7 output block.
+ *
+ * Optimized algorithm with 12 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/14).
+ */
+
+GLOBAL(void)
+jpeg_idct_7x7 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12, tmp13;
+  INT32 z1, z2, z3;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[7*7];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 7; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp13 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp13 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp13 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    tmp10 = MULTIPLY(z2 - z3, FIX(0.881747734));     /* c4 */
+    tmp12 = MULTIPLY(z1 - z2, FIX(0.314692123));     /* c6 */
+    tmp11 = tmp10 + tmp12 + tmp13 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */
+    tmp0 = z1 + z3;
+    z2 -= tmp0;
+    tmp0 = MULTIPLY(tmp0, FIX(1.274162392)) + tmp13; /* c2 */
+    tmp10 += tmp0 - MULTIPLY(z3, FIX(0.077722536));  /* c2-c4-c6 */
+    tmp12 += tmp0 - MULTIPLY(z1, FIX(2.470602249));  /* c2+c4+c6 */
+    tmp13 += MULTIPLY(z2, FIX(1.414213562));         /* c0 */
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+
+    tmp1 = MULTIPLY(z1 + z2, FIX(0.935414347));      /* (c3+c1-c5)/2 */
+    tmp2 = MULTIPLY(z1 - z2, FIX(0.170262339));      /* (c3+c5-c1)/2 */
+    tmp0 = tmp1 - tmp2;
+    tmp1 += tmp2;
+    tmp2 = MULTIPLY(z2 + z3, - FIX(1.378756276));    /* -c1 */
+    tmp1 += tmp2;
+    z2 = MULTIPLY(z1 + z3, FIX(0.613604268));        /* c5 */
+    tmp0 += z2;
+    tmp2 += z2 + MULTIPLY(z3, FIX(1.870828693));     /* c3+c1-c5 */
+
+    /* Final output stage */
+
+    wsptr[7*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[7*6] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[7*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS);
+    wsptr[7*5] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS);
+    wsptr[7*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS);
+    wsptr[7*4] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS);
+    wsptr[7*3] = (int) RIGHT_SHIFT(tmp13, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 7 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 7; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp13 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp13 <<= CONST_BITS;
+
+    z1 = (INT32) wsptr[2];
+    z2 = (INT32) wsptr[4];
+    z3 = (INT32) wsptr[6];
+
+    tmp10 = MULTIPLY(z2 - z3, FIX(0.881747734));     /* c4 */
+    tmp12 = MULTIPLY(z1 - z2, FIX(0.314692123));     /* c6 */
+    tmp11 = tmp10 + tmp12 + tmp13 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */
+    tmp0 = z1 + z3;
+    z2 -= tmp0;
+    tmp0 = MULTIPLY(tmp0, FIX(1.274162392)) + tmp13; /* c2 */
+    tmp10 += tmp0 - MULTIPLY(z3, FIX(0.077722536));  /* c2-c4-c6 */
+    tmp12 += tmp0 - MULTIPLY(z1, FIX(2.470602249));  /* c2+c4+c6 */
+    tmp13 += MULTIPLY(z2, FIX(1.414213562));         /* c0 */
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+
+    tmp1 = MULTIPLY(z1 + z2, FIX(0.935414347));      /* (c3+c1-c5)/2 */
+    tmp2 = MULTIPLY(z1 - z2, FIX(0.170262339));      /* (c3+c5-c1)/2 */
+    tmp0 = tmp1 - tmp2;
+    tmp1 += tmp2;
+    tmp2 = MULTIPLY(z2 + z3, - FIX(1.378756276));    /* -c1 */
+    tmp1 += tmp2;
+    z2 = MULTIPLY(z1 + z3, FIX(0.613604268));        /* c5 */
+    tmp0 += z2;
+    tmp2 += z2 + MULTIPLY(z3, FIX(1.870828693));     /* c3+c1-c5 */
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 7;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a reduced-size 6x6 output block.
+ *
+ * Optimized algorithm with 3 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/12).
+ */
+
+GLOBAL(void)
+jpeg_idct_6x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12;
+  INT32 z1, z2, z3;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[6*6];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp0 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp0 += ONE << (CONST_BITS-PASS1_BITS-1);
+    tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    tmp10 = MULTIPLY(tmp2, FIX(0.707106781));   /* c4 */
+    tmp1 = tmp0 + tmp10;
+    tmp11 = RIGHT_SHIFT(tmp0 - tmp10 - tmp10, CONST_BITS-PASS1_BITS);
+    tmp10 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    tmp0 = MULTIPLY(tmp10, FIX(1.224744871));   /* c2 */
+    tmp10 = tmp1 + tmp0;
+    tmp12 = tmp1 - tmp0;
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */
+    tmp0 = tmp1 + ((z1 + z2) << CONST_BITS);
+    tmp2 = tmp1 + ((z3 - z2) << CONST_BITS);
+    tmp1 = (z1 - z2 - z3) << PASS1_BITS;
+
+    /* Final output stage */
+
+    wsptr[6*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[6*5] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[6*1] = (int) (tmp11 + tmp1);
+    wsptr[6*4] = (int) (tmp11 - tmp1);
+    wsptr[6*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS);
+    wsptr[6*3] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 6 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 6; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp0 <<= CONST_BITS;
+    tmp2 = (INT32) wsptr[4];
+    tmp10 = MULTIPLY(tmp2, FIX(0.707106781));   /* c4 */
+    tmp1 = tmp0 + tmp10;
+    tmp11 = tmp0 - tmp10 - tmp10;
+    tmp10 = (INT32) wsptr[2];
+    tmp0 = MULTIPLY(tmp10, FIX(1.224744871));   /* c2 */
+    tmp10 = tmp1 + tmp0;
+    tmp12 = tmp1 - tmp0;
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */
+    tmp0 = tmp1 + ((z1 + z2) << CONST_BITS);
+    tmp2 = tmp1 + ((z3 - z2) << CONST_BITS);
+    tmp1 = (z1 - z2 - z3) << CONST_BITS;
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 6;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a reduced-size 5x5 output block.
+ *
+ * Optimized algorithm with 5 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/10).
+ */
+
+GLOBAL(void)
+jpeg_idct_5x5 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp10, tmp11, tmp12;
+  INT32 z1, z2, z3;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[5*5];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 5; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp12 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp12 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp12 += ONE << (CONST_BITS-PASS1_BITS-1);
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    tmp1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z1 = MULTIPLY(tmp0 + tmp1, FIX(0.790569415)); /* (c2+c4)/2 */
+    z2 = MULTIPLY(tmp0 - tmp1, FIX(0.353553391)); /* (c2-c4)/2 */
+    z3 = tmp12 + z2;
+    tmp10 = z3 + z1;
+    tmp11 = z3 - z1;
+    tmp12 -= z2 << 2;
+
+    /* Odd part */
+
+    z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+
+    z1 = MULTIPLY(z2 + z3, FIX(0.831253876));     /* c3 */
+    tmp0 = z1 + MULTIPLY(z2, FIX(0.513743148));   /* c1-c3 */
+    tmp1 = z1 - MULTIPLY(z3, FIX(2.176250899));   /* c1+c3 */
+
+    /* Final output stage */
+
+    wsptr[5*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[5*4] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[5*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS);
+    wsptr[5*3] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS);
+    wsptr[5*2] = (int) RIGHT_SHIFT(tmp12, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 5 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 5; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp12 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp12 <<= CONST_BITS;
+    tmp0 = (INT32) wsptr[2];
+    tmp1 = (INT32) wsptr[4];
+    z1 = MULTIPLY(tmp0 + tmp1, FIX(0.790569415)); /* (c2+c4)/2 */
+    z2 = MULTIPLY(tmp0 - tmp1, FIX(0.353553391)); /* (c2-c4)/2 */
+    z3 = tmp12 + z2;
+    tmp10 = z3 + z1;
+    tmp11 = z3 - z1;
+    tmp12 -= z2 << 2;
+
+    /* Odd part */
+
+    z2 = (INT32) wsptr[1];
+    z3 = (INT32) wsptr[3];
+
+    z1 = MULTIPLY(z2 + z3, FIX(0.831253876));     /* c3 */
+    tmp0 = z1 + MULTIPLY(z2, FIX(0.513743148));   /* c1-c3 */
+    tmp1 = z1 - MULTIPLY(z3, FIX(2.176250899));   /* c1+c3 */
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 5;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a reduced-size 4x4 output block.
+ *
+ * Optimized algorithm with 3 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT].
+ */
+
+GLOBAL(void)
+jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp2, tmp10, tmp12;
+  INT32 z1, z2, z3;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[4*4];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 4; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    
+    tmp10 = (tmp0 + tmp2) << PASS1_BITS;
+    tmp12 = (tmp0 - tmp2) << PASS1_BITS;
+
+    /* Odd part */
+    /* Same rotation as in the even part of the 8x8 LL&M IDCT */
+
+    z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+
+    z1 = MULTIPLY(z2 + z3, FIX_0_541196100);               /* c6 */
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS-PASS1_BITS-1);
+    tmp0 = RIGHT_SHIFT(z1 + MULTIPLY(z2, FIX_0_765366865), /* c2-c6 */
+		       CONST_BITS-PASS1_BITS);
+    tmp2 = RIGHT_SHIFT(z1 - MULTIPLY(z3, FIX_1_847759065), /* c2+c6 */
+		       CONST_BITS-PASS1_BITS);
+
+    /* Final output stage */
+
+    wsptr[4*0] = (int) (tmp10 + tmp0);
+    wsptr[4*3] = (int) (tmp10 - tmp0);
+    wsptr[4*1] = (int) (tmp12 + tmp2);
+    wsptr[4*2] = (int) (tmp12 - tmp2);
+  }
+
+  /* Pass 2: process 4 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 4; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp2 = (INT32) wsptr[2];
+
+    tmp10 = (tmp0 + tmp2) << CONST_BITS;
+    tmp12 = (tmp0 - tmp2) << CONST_BITS;
+
+    /* Odd part */
+    /* Same rotation as in the even part of the 8x8 LL&M IDCT */
+
+    z2 = (INT32) wsptr[1];
+    z3 = (INT32) wsptr[3];
+
+    z1 = MULTIPLY(z2 + z3, FIX_0_541196100);   /* c6 */
+    tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */
+    tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 4;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a reduced-size 3x3 output block.
+ *
+ * Optimized algorithm with 2 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/6).
+ */
+
+GLOBAL(void)
+jpeg_idct_3x3 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp2, tmp10, tmp12;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[3*3];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 3; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp0 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp0 += ONE << (CONST_BITS-PASS1_BITS-1);
+    tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */
+    tmp10 = tmp0 + tmp12;
+    tmp2 = tmp0 - tmp12 - tmp12;
+
+    /* Odd part */
+
+    tmp12 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */
+
+    /* Final output stage */
+
+    wsptr[3*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[3*2] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[3*1] = (int) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 3 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 3; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp0 <<= CONST_BITS;
+    tmp2 = (INT32) wsptr[2];
+    tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */
+    tmp10 = tmp0 + tmp12;
+    tmp2 = tmp0 - tmp12 - tmp12;
+
+    /* Odd part */
+
+    tmp12 = (INT32) wsptr[1];
+    tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 3;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a reduced-size 2x2 output block.
+ *
+ * Multiplication-less algorithm.
+ */
+
+GLOBAL(void)
+jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5;
+  ISLOW_MULT_TYPE * quantptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input. */
+
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+
+  /* Column 0 */
+  tmp4 = DEQUANTIZE(coef_block[DCTSIZE*0], quantptr[DCTSIZE*0]);
+  tmp5 = DEQUANTIZE(coef_block[DCTSIZE*1], quantptr[DCTSIZE*1]);
+  /* Add fudge factor here for final descale. */
+  tmp4 += ONE << 2;
+
+  tmp0 = tmp4 + tmp5;
+  tmp2 = tmp4 - tmp5;
+
+  /* Column 1 */
+  tmp4 = DEQUANTIZE(coef_block[DCTSIZE*0+1], quantptr[DCTSIZE*0+1]);
+  tmp5 = DEQUANTIZE(coef_block[DCTSIZE*1+1], quantptr[DCTSIZE*1+1]);
+
+  tmp1 = tmp4 + tmp5;
+  tmp3 = tmp4 - tmp5;
+
+  /* Pass 2: process 2 rows, store into output array. */
+
+  /* Row 0 */
+  outptr = output_buf[0] + output_col;
+
+  outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp0 + tmp1, 3) & RANGE_MASK];
+  outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp0 - tmp1, 3) & RANGE_MASK];
+
+  /* Row 1 */
+  outptr = output_buf[1] + output_col;
+
+  outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp2 + tmp3, 3) & RANGE_MASK];
+  outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2 - tmp3, 3) & RANGE_MASK];
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a reduced-size 1x1 output block.
+ *
+ * We hardly need an inverse DCT routine for this: just take the
+ * average pixel value, which is one-eighth of the DC coefficient.
+ */
+
+GLOBAL(void)
+jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  int dcval;
+  ISLOW_MULT_TYPE * quantptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  SHIFT_TEMPS
+
+  /* 1x1 is trivial: just take the DC coefficient divided by 8. */
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  dcval = DEQUANTIZE(coef_block[0], quantptr[0]);
+  dcval = (int) DESCALE((INT32) dcval, 3);
+
+  output_buf[0][output_col] = range_limit[dcval & RANGE_MASK];
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 9x9 output block.
+ *
+ * Optimized algorithm with 10 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/18).
+ */
+
+GLOBAL(void)
+jpeg_idct_9x9 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13, tmp14;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*9];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp0 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp0 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    tmp3 = MULTIPLY(z3, FIX(0.707106781));      /* c6 */
+    tmp1 = tmp0 + tmp3;
+    tmp2 = tmp0 - tmp3 - tmp3;
+
+    tmp0 = MULTIPLY(z1 - z2, FIX(0.707106781)); /* c6 */
+    tmp11 = tmp2 + tmp0;
+    tmp14 = tmp2 - tmp0 - tmp0;
+
+    tmp0 = MULTIPLY(z1 + z2, FIX(1.328926049)); /* c2 */
+    tmp2 = MULTIPLY(z1, FIX(1.083350441));      /* c4 */
+    tmp3 = MULTIPLY(z2, FIX(0.245575608));      /* c8 */
+
+    tmp10 = tmp1 + tmp0 - tmp3;
+    tmp12 = tmp1 - tmp0 + tmp2;
+    tmp13 = tmp1 - tmp2 + tmp3;
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+
+    z2 = MULTIPLY(z2, - FIX(1.224744871));           /* -c3 */
+
+    tmp2 = MULTIPLY(z1 + z3, FIX(0.909038955));      /* c5 */
+    tmp3 = MULTIPLY(z1 + z4, FIX(0.483689525));      /* c7 */
+    tmp0 = tmp2 + tmp3 - z2;
+    tmp1 = MULTIPLY(z3 - z4, FIX(1.392728481));      /* c1 */
+    tmp2 += z2 - tmp1;
+    tmp3 += z2 + tmp1;
+    tmp1 = MULTIPLY(z1 - z3 - z4, FIX(1.224744871)); /* c3 */
+
+    /* Final output stage */
+
+    wsptr[8*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[8*8] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[8*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS);
+    wsptr[8*7] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS);
+    wsptr[8*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS);
+    wsptr[8*6] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS);
+    wsptr[8*3] = (int) RIGHT_SHIFT(tmp13 + tmp3, CONST_BITS-PASS1_BITS);
+    wsptr[8*5] = (int) RIGHT_SHIFT(tmp13 - tmp3, CONST_BITS-PASS1_BITS);
+    wsptr[8*4] = (int) RIGHT_SHIFT(tmp14, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 9 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 9; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp0 <<= CONST_BITS;
+
+    z1 = (INT32) wsptr[2];
+    z2 = (INT32) wsptr[4];
+    z3 = (INT32) wsptr[6];
+
+    tmp3 = MULTIPLY(z3, FIX(0.707106781));      /* c6 */
+    tmp1 = tmp0 + tmp3;
+    tmp2 = tmp0 - tmp3 - tmp3;
+
+    tmp0 = MULTIPLY(z1 - z2, FIX(0.707106781)); /* c6 */
+    tmp11 = tmp2 + tmp0;
+    tmp14 = tmp2 - tmp0 - tmp0;
+
+    tmp0 = MULTIPLY(z1 + z2, FIX(1.328926049)); /* c2 */
+    tmp2 = MULTIPLY(z1, FIX(1.083350441));      /* c4 */
+    tmp3 = MULTIPLY(z2, FIX(0.245575608));      /* c8 */
+
+    tmp10 = tmp1 + tmp0 - tmp3;
+    tmp12 = tmp1 - tmp0 + tmp2;
+    tmp13 = tmp1 - tmp2 + tmp3;
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    z4 = (INT32) wsptr[7];
+
+    z2 = MULTIPLY(z2, - FIX(1.224744871));           /* -c3 */
+
+    tmp2 = MULTIPLY(z1 + z3, FIX(0.909038955));      /* c5 */
+    tmp3 = MULTIPLY(z1 + z4, FIX(0.483689525));      /* c7 */
+    tmp0 = tmp2 + tmp3 - z2;
+    tmp1 = MULTIPLY(z3 - z4, FIX(1.392728481));      /* c1 */
+    tmp2 += z2 - tmp1;
+    tmp3 += z2 + tmp1;
+    tmp1 = MULTIPLY(z1 - z3 - z4, FIX(1.224744871)); /* c3 */
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp3,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp3,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp14,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 8;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 10x10 output block.
+ *
+ * Optimized algorithm with 12 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/20).
+ */
+
+GLOBAL(void)
+jpeg_idct_10x10 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JCOEFPTR coef_block,
+		 JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24;
+  INT32 z1, z2, z3, z4, z5;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*10];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    z3 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    z3 += ONE << (CONST_BITS-PASS1_BITS-1);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z1 = MULTIPLY(z4, FIX(1.144122806));         /* c4 */
+    z2 = MULTIPLY(z4, FIX(0.437016024));         /* c8 */
+    tmp10 = z3 + z1;
+    tmp11 = z3 - z2;
+
+    tmp22 = RIGHT_SHIFT(z3 - ((z1 - z2) << 1),   /* c0 = (c4-c8)*2 */
+			CONST_BITS-PASS1_BITS);
+
+    z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    z1 = MULTIPLY(z2 + z3, FIX(0.831253876));    /* c6 */
+    tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */
+    tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */
+
+    tmp20 = tmp10 + tmp12;
+    tmp24 = tmp10 - tmp12;
+    tmp21 = tmp11 + tmp13;
+    tmp23 = tmp11 - tmp13;
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+
+    tmp11 = z2 + z4;
+    tmp13 = z2 - z4;
+
+    tmp12 = MULTIPLY(tmp13, FIX(0.309016994));        /* (c3-c7)/2 */
+    z5 = z3 << CONST_BITS;
+
+    z2 = MULTIPLY(tmp11, FIX(0.951056516));           /* (c3+c7)/2 */
+    z4 = z5 + tmp12;
+
+    tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */
+    tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */
+
+    z2 = MULTIPLY(tmp11, FIX(0.587785252));           /* (c1-c9)/2 */
+    z4 = z5 - tmp12 - (tmp13 << (CONST_BITS - 1));
+
+    tmp12 = (z1 - tmp13 - z3) << PASS1_BITS;
+
+    tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */
+    tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */
+
+    /* Final output stage */
+
+    wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*9] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*8] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*2] = (int) (tmp22 + tmp12);
+    wsptr[8*7] = (int) (tmp22 - tmp12);
+    wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*6] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*5] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 10 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 10; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    z3 <<= CONST_BITS;
+    z4 = (INT32) wsptr[4];
+    z1 = MULTIPLY(z4, FIX(1.144122806));         /* c4 */
+    z2 = MULTIPLY(z4, FIX(0.437016024));         /* c8 */
+    tmp10 = z3 + z1;
+    tmp11 = z3 - z2;
+
+    tmp22 = z3 - ((z1 - z2) << 1);               /* c0 = (c4-c8)*2 */
+
+    z2 = (INT32) wsptr[2];
+    z3 = (INT32) wsptr[6];
+
+    z1 = MULTIPLY(z2 + z3, FIX(0.831253876));    /* c6 */
+    tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */
+    tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */
+
+    tmp20 = tmp10 + tmp12;
+    tmp24 = tmp10 - tmp12;
+    tmp21 = tmp11 + tmp13;
+    tmp23 = tmp11 - tmp13;
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    z3 <<= CONST_BITS;
+    z4 = (INT32) wsptr[7];
+
+    tmp11 = z2 + z4;
+    tmp13 = z2 - z4;
+
+    tmp12 = MULTIPLY(tmp13, FIX(0.309016994));        /* (c3-c7)/2 */
+
+    z2 = MULTIPLY(tmp11, FIX(0.951056516));           /* (c3+c7)/2 */
+    z4 = z3 + tmp12;
+
+    tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */
+    tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */
+
+    z2 = MULTIPLY(tmp11, FIX(0.587785252));           /* (c1-c9)/2 */
+    z4 = z3 - tmp12 - (tmp13 << (CONST_BITS - 1));
+
+    tmp12 = ((z1 - tmp13) << CONST_BITS) - z3;
+
+    tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */
+    tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 8;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 11x11 output block.
+ *
+ * Optimized algorithm with 24 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/22).
+ */
+
+GLOBAL(void)
+jpeg_idct_11x11 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JCOEFPTR coef_block,
+		 JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*11];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp10 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp10 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    tmp20 = MULTIPLY(z2 - z3, FIX(2.546640132));     /* c2+c4 */
+    tmp23 = MULTIPLY(z2 - z1, FIX(0.430815045));     /* c2-c6 */
+    z4 = z1 + z3;
+    tmp24 = MULTIPLY(z4, - FIX(1.155664402));        /* -(c2-c10) */
+    z4 -= z2;
+    tmp25 = tmp10 + MULTIPLY(z4, FIX(1.356927976));  /* c2 */
+    tmp21 = tmp20 + tmp23 + tmp25 -
+	    MULTIPLY(z2, FIX(1.821790775));          /* c2+c4+c10-c6 */
+    tmp20 += tmp25 + MULTIPLY(z3, FIX(2.115825087)); /* c4+c6 */
+    tmp23 += tmp25 - MULTIPLY(z1, FIX(1.513598477)); /* c6+c8 */
+    tmp24 += tmp25;
+    tmp22 = tmp24 - MULTIPLY(z3, FIX(0.788749120));  /* c8+c10 */
+    tmp24 += MULTIPLY(z2, FIX(1.944413522)) -        /* c2+c8 */
+	     MULTIPLY(z1, FIX(1.390975730));         /* c4+c10 */
+    tmp25 = tmp10 - MULTIPLY(z4, FIX(1.414213562));  /* c0 */
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+
+    tmp11 = z1 + z2;
+    tmp14 = MULTIPLY(tmp11 + z3 + z4, FIX(0.398430003)); /* c9 */
+    tmp11 = MULTIPLY(tmp11, FIX(0.887983902));           /* c3-c9 */
+    tmp12 = MULTIPLY(z1 + z3, FIX(0.670361295));         /* c5-c9 */
+    tmp13 = tmp14 + MULTIPLY(z1 + z4, FIX(0.366151574)); /* c7-c9 */
+    tmp10 = tmp11 + tmp12 + tmp13 -
+	    MULTIPLY(z1, FIX(0.923107866));              /* c7+c5+c3-c1-2*c9 */
+    z1    = tmp14 - MULTIPLY(z2 + z3, FIX(1.163011579)); /* c7+c9 */
+    tmp11 += z1 + MULTIPLY(z2, FIX(2.073276588));        /* c1+c7+3*c9-c3 */
+    tmp12 += z1 - MULTIPLY(z3, FIX(1.192193623));        /* c3+c5-c7-c9 */
+    z1    = MULTIPLY(z2 + z4, - FIX(1.798248910));       /* -(c1+c9) */
+    tmp11 += z1;
+    tmp13 += z1 + MULTIPLY(z4, FIX(2.102458632));        /* c1+c5+c9-c7 */
+    tmp14 += MULTIPLY(z2, - FIX(1.467221301)) +          /* -(c5+c9) */
+	     MULTIPLY(z3, FIX(1.001388905)) -            /* c1-c9 */
+	     MULTIPLY(z4, FIX(1.684843907));             /* c3+c9 */
+
+    /* Final output stage */
+
+    wsptr[8*0]  = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*10] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*1]  = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*9]  = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*2]  = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*8]  = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*3]  = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*7]  = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*4]  = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*6]  = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*5]  = (int) RIGHT_SHIFT(tmp25, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 11 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 11; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp10 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp10 <<= CONST_BITS;
+
+    z1 = (INT32) wsptr[2];
+    z2 = (INT32) wsptr[4];
+    z3 = (INT32) wsptr[6];
+
+    tmp20 = MULTIPLY(z2 - z3, FIX(2.546640132));     /* c2+c4 */
+    tmp23 = MULTIPLY(z2 - z1, FIX(0.430815045));     /* c2-c6 */
+    z4 = z1 + z3;
+    tmp24 = MULTIPLY(z4, - FIX(1.155664402));        /* -(c2-c10) */
+    z4 -= z2;
+    tmp25 = tmp10 + MULTIPLY(z4, FIX(1.356927976));  /* c2 */
+    tmp21 = tmp20 + tmp23 + tmp25 -
+	    MULTIPLY(z2, FIX(1.821790775));          /* c2+c4+c10-c6 */
+    tmp20 += tmp25 + MULTIPLY(z3, FIX(2.115825087)); /* c4+c6 */
+    tmp23 += tmp25 - MULTIPLY(z1, FIX(1.513598477)); /* c6+c8 */
+    tmp24 += tmp25;
+    tmp22 = tmp24 - MULTIPLY(z3, FIX(0.788749120));  /* c8+c10 */
+    tmp24 += MULTIPLY(z2, FIX(1.944413522)) -        /* c2+c8 */
+	     MULTIPLY(z1, FIX(1.390975730));         /* c4+c10 */
+    tmp25 = tmp10 - MULTIPLY(z4, FIX(1.414213562));  /* c0 */
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    z4 = (INT32) wsptr[7];
+
+    tmp11 = z1 + z2;
+    tmp14 = MULTIPLY(tmp11 + z3 + z4, FIX(0.398430003)); /* c9 */
+    tmp11 = MULTIPLY(tmp11, FIX(0.887983902));           /* c3-c9 */
+    tmp12 = MULTIPLY(z1 + z3, FIX(0.670361295));         /* c5-c9 */
+    tmp13 = tmp14 + MULTIPLY(z1 + z4, FIX(0.366151574)); /* c7-c9 */
+    tmp10 = tmp11 + tmp12 + tmp13 -
+	    MULTIPLY(z1, FIX(0.923107866));              /* c7+c5+c3-c1-2*c9 */
+    z1    = tmp14 - MULTIPLY(z2 + z3, FIX(1.163011579)); /* c7+c9 */
+    tmp11 += z1 + MULTIPLY(z2, FIX(2.073276588));        /* c1+c7+3*c9-c3 */
+    tmp12 += z1 - MULTIPLY(z3, FIX(1.192193623));        /* c3+c5-c7-c9 */
+    z1    = MULTIPLY(z2 + z4, - FIX(1.798248910));       /* -(c1+c9) */
+    tmp11 += z1;
+    tmp13 += z1 + MULTIPLY(z4, FIX(2.102458632));        /* c1+c5+c9-c7 */
+    tmp14 += MULTIPLY(z2, - FIX(1.467221301)) +          /* -(c5+c9) */
+	     MULTIPLY(z3, FIX(1.001388905)) -            /* c1-c9 */
+	     MULTIPLY(z4, FIX(1.684843907));             /* c3+c9 */
+
+    /* Final output stage */
+
+    outptr[0]  = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[1]  = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[9]  = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[2]  = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[8]  = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[3]  = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[7]  = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[4]  = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[6]  = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[5]  = range_limit[(int) RIGHT_SHIFT(tmp25,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+
+    wsptr += 8;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 12x12 output block.
+ *
+ * Optimized algorithm with 15 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/24).
+ */
+
+GLOBAL(void)
+jpeg_idct_12x12 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JCOEFPTR coef_block,
+		 JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*12];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    z3 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    z3 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */
+
+    tmp10 = z3 + z4;
+    tmp11 = z3 - z4;
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */
+    z1 <<= CONST_BITS;
+    z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+    z2 <<= CONST_BITS;
+
+    tmp12 = z1 - z2;
+
+    tmp21 = z3 + tmp12;
+    tmp24 = z3 - tmp12;
+
+    tmp12 = z4 + z2;
+
+    tmp20 = tmp10 + tmp12;
+    tmp25 = tmp10 - tmp12;
+
+    tmp12 = z4 - z1 - z2;
+
+    tmp22 = tmp11 + tmp12;
+    tmp23 = tmp11 - tmp12;
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+
+    tmp11 = MULTIPLY(z2, FIX(1.306562965));                  /* c3 */
+    tmp14 = MULTIPLY(z2, - FIX_0_541196100);                 /* -c9 */
+
+    tmp10 = z1 + z3;
+    tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669));          /* c7 */
+    tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384));       /* c5-c7 */
+    tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716));  /* c1-c5 */
+    tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580));           /* -(c7+c11) */
+    tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */
+    tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */
+    tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) -        /* c7-c11 */
+	     MULTIPLY(z4, FIX(1.982889723));                 /* c5+c7 */
+
+    z1 -= z4;
+    z2 -= z3;
+    z3 = MULTIPLY(z1 + z2, FIX_0_541196100);                 /* c9 */
+    tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865);              /* c3-c9 */
+    tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065);              /* c3+c9 */
+
+    /* Final output stage */
+
+    wsptr[8*0]  = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*11] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*1]  = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*10] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*2]  = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*9]  = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*3]  = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*8]  = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*4]  = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*7]  = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*5]  = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS);
+    wsptr[8*6]  = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 12 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 12; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    z3 <<= CONST_BITS;
+
+    z4 = (INT32) wsptr[4];
+    z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */
+
+    tmp10 = z3 + z4;
+    tmp11 = z3 - z4;
+
+    z1 = (INT32) wsptr[2];
+    z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */
+    z1 <<= CONST_BITS;
+    z2 = (INT32) wsptr[6];
+    z2 <<= CONST_BITS;
+
+    tmp12 = z1 - z2;
+
+    tmp21 = z3 + tmp12;
+    tmp24 = z3 - tmp12;
+
+    tmp12 = z4 + z2;
+
+    tmp20 = tmp10 + tmp12;
+    tmp25 = tmp10 - tmp12;
+
+    tmp12 = z4 - z1 - z2;
+
+    tmp22 = tmp11 + tmp12;
+    tmp23 = tmp11 - tmp12;
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    z4 = (INT32) wsptr[7];
+
+    tmp11 = MULTIPLY(z2, FIX(1.306562965));                  /* c3 */
+    tmp14 = MULTIPLY(z2, - FIX_0_541196100);                 /* -c9 */
+
+    tmp10 = z1 + z3;
+    tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669));          /* c7 */
+    tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384));       /* c5-c7 */
+    tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716));  /* c1-c5 */
+    tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580));           /* -(c7+c11) */
+    tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */
+    tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */
+    tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) -        /* c7-c11 */
+	     MULTIPLY(z4, FIX(1.982889723));                 /* c5+c7 */
+
+    z1 -= z4;
+    z2 -= z3;
+    z3 = MULTIPLY(z1 + z2, FIX_0_541196100);                 /* c9 */
+    tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865);              /* c3-c9 */
+    tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065);              /* c3+c9 */
+
+    /* Final output stage */
+
+    outptr[0]  = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[1]  = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[2]  = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[9]  = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[3]  = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[8]  = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[4]  = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[7]  = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[5]  = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[6]  = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+
+    wsptr += 8;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 13x13 output block.
+ *
+ * Optimized algorithm with 29 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/26).
+ */
+
+GLOBAL(void)
+jpeg_idct_13x13 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JCOEFPTR coef_block,
+		 JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*13];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    z1 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    tmp10 = z3 + z4;
+    tmp11 = z3 - z4;
+
+    tmp12 = MULTIPLY(tmp10, FIX(1.155388986));                /* (c4+c6)/2 */
+    tmp13 = MULTIPLY(tmp11, FIX(0.096834934)) + z1;           /* (c4-c6)/2 */
+
+    tmp20 = MULTIPLY(z2, FIX(1.373119086)) + tmp12 + tmp13;   /* c2 */
+    tmp22 = MULTIPLY(z2, FIX(0.501487041)) - tmp12 + tmp13;   /* c10 */
+
+    tmp12 = MULTIPLY(tmp10, FIX(0.316450131));                /* (c8-c12)/2 */
+    tmp13 = MULTIPLY(tmp11, FIX(0.486914739)) + z1;           /* (c8+c12)/2 */
+
+    tmp21 = MULTIPLY(z2, FIX(1.058554052)) - tmp12 + tmp13;   /* c6 */
+    tmp25 = MULTIPLY(z2, - FIX(1.252223920)) + tmp12 + tmp13; /* c4 */
+
+    tmp12 = MULTIPLY(tmp10, FIX(0.435816023));                /* (c2-c10)/2 */
+    tmp13 = MULTIPLY(tmp11, FIX(0.937303064)) - z1;           /* (c2+c10)/2 */
+
+    tmp23 = MULTIPLY(z2, - FIX(0.170464608)) - tmp12 - tmp13; /* c12 */
+    tmp24 = MULTIPLY(z2, - FIX(0.803364869)) + tmp12 - tmp13; /* c8 */
+
+    tmp26 = MULTIPLY(tmp11 - z2, FIX(1.414213562)) + z1;      /* c0 */
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+
+    tmp11 = MULTIPLY(z1 + z2, FIX(1.322312651));     /* c3 */
+    tmp12 = MULTIPLY(z1 + z3, FIX(1.163874945));     /* c5 */
+    tmp15 = z1 + z4;
+    tmp13 = MULTIPLY(tmp15, FIX(0.937797057));       /* c7 */
+    tmp10 = tmp11 + tmp12 + tmp13 -
+	    MULTIPLY(z1, FIX(2.020082300));          /* c7+c5+c3-c1 */
+    tmp14 = MULTIPLY(z2 + z3, - FIX(0.338443458));   /* -c11 */
+    tmp11 += tmp14 + MULTIPLY(z2, FIX(0.837223564)); /* c5+c9+c11-c3 */
+    tmp12 += tmp14 - MULTIPLY(z3, FIX(1.572116027)); /* c1+c5-c9-c11 */
+    tmp14 = MULTIPLY(z2 + z4, - FIX(1.163874945));   /* -c5 */
+    tmp11 += tmp14;
+    tmp13 += tmp14 + MULTIPLY(z4, FIX(2.205608352)); /* c3+c5+c9-c7 */
+    tmp14 = MULTIPLY(z3 + z4, - FIX(0.657217813));   /* -c9 */
+    tmp12 += tmp14;
+    tmp13 += tmp14;
+    tmp15 = MULTIPLY(tmp15, FIX(0.338443458));       /* c11 */
+    tmp14 = tmp15 + MULTIPLY(z1, FIX(0.318774355)) - /* c9-c11 */
+	    MULTIPLY(z2, FIX(0.466105296));          /* c1-c7 */
+    z1    = MULTIPLY(z3 - z2, FIX(0.937797057));     /* c7 */
+    tmp14 += z1;
+    tmp15 += z1 + MULTIPLY(z3, FIX(0.384515595)) -   /* c3-c7 */
+	     MULTIPLY(z4, FIX(1.742345811));         /* c1+c11 */
+
+    /* Final output stage */
+
+    wsptr[8*0]  = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*12] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*1]  = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*11] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*2]  = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*10] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*3]  = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*9]  = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*4]  = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*8]  = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*5]  = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS);
+    wsptr[8*7]  = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS);
+    wsptr[8*6]  = (int) RIGHT_SHIFT(tmp26, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 13 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 13; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    z1 <<= CONST_BITS;
+
+    z2 = (INT32) wsptr[2];
+    z3 = (INT32) wsptr[4];
+    z4 = (INT32) wsptr[6];
+
+    tmp10 = z3 + z4;
+    tmp11 = z3 - z4;
+
+    tmp12 = MULTIPLY(tmp10, FIX(1.155388986));                /* (c4+c6)/2 */
+    tmp13 = MULTIPLY(tmp11, FIX(0.096834934)) + z1;           /* (c4-c6)/2 */
+
+    tmp20 = MULTIPLY(z2, FIX(1.373119086)) + tmp12 + tmp13;   /* c2 */
+    tmp22 = MULTIPLY(z2, FIX(0.501487041)) - tmp12 + tmp13;   /* c10 */
+
+    tmp12 = MULTIPLY(tmp10, FIX(0.316450131));                /* (c8-c12)/2 */
+    tmp13 = MULTIPLY(tmp11, FIX(0.486914739)) + z1;           /* (c8+c12)/2 */
+
+    tmp21 = MULTIPLY(z2, FIX(1.058554052)) - tmp12 + tmp13;   /* c6 */
+    tmp25 = MULTIPLY(z2, - FIX(1.252223920)) + tmp12 + tmp13; /* c4 */
+
+    tmp12 = MULTIPLY(tmp10, FIX(0.435816023));                /* (c2-c10)/2 */
+    tmp13 = MULTIPLY(tmp11, FIX(0.937303064)) - z1;           /* (c2+c10)/2 */
+
+    tmp23 = MULTIPLY(z2, - FIX(0.170464608)) - tmp12 - tmp13; /* c12 */
+    tmp24 = MULTIPLY(z2, - FIX(0.803364869)) + tmp12 - tmp13; /* c8 */
+
+    tmp26 = MULTIPLY(tmp11 - z2, FIX(1.414213562)) + z1;      /* c0 */
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    z4 = (INT32) wsptr[7];
+
+    tmp11 = MULTIPLY(z1 + z2, FIX(1.322312651));     /* c3 */
+    tmp12 = MULTIPLY(z1 + z3, FIX(1.163874945));     /* c5 */
+    tmp15 = z1 + z4;
+    tmp13 = MULTIPLY(tmp15, FIX(0.937797057));       /* c7 */
+    tmp10 = tmp11 + tmp12 + tmp13 -
+	    MULTIPLY(z1, FIX(2.020082300));          /* c7+c5+c3-c1 */
+    tmp14 = MULTIPLY(z2 + z3, - FIX(0.338443458));   /* -c11 */
+    tmp11 += tmp14 + MULTIPLY(z2, FIX(0.837223564)); /* c5+c9+c11-c3 */
+    tmp12 += tmp14 - MULTIPLY(z3, FIX(1.572116027)); /* c1+c5-c9-c11 */
+    tmp14 = MULTIPLY(z2 + z4, - FIX(1.163874945));   /* -c5 */
+    tmp11 += tmp14;
+    tmp13 += tmp14 + MULTIPLY(z4, FIX(2.205608352)); /* c3+c5+c9-c7 */
+    tmp14 = MULTIPLY(z3 + z4, - FIX(0.657217813));   /* -c9 */
+    tmp12 += tmp14;
+    tmp13 += tmp14;
+    tmp15 = MULTIPLY(tmp15, FIX(0.338443458));       /* c11 */
+    tmp14 = tmp15 + MULTIPLY(z1, FIX(0.318774355)) - /* c9-c11 */
+	    MULTIPLY(z2, FIX(0.466105296));          /* c1-c7 */
+    z1    = MULTIPLY(z3 - z2, FIX(0.937797057));     /* c7 */
+    tmp14 += z1;
+    tmp15 += z1 + MULTIPLY(z3, FIX(0.384515595)) -   /* c3-c7 */
+	     MULTIPLY(z4, FIX(1.742345811));         /* c1+c11 */
+
+    /* Final output stage */
+
+    outptr[0]  = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[1]  = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[2]  = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[3]  = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[9]  = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[4]  = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[8]  = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[5]  = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[7]  = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[6]  = range_limit[(int) RIGHT_SHIFT(tmp26,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+
+    wsptr += 8;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 14x14 output block.
+ *
+ * Optimized algorithm with 20 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/28).
+ */
+
+GLOBAL(void)
+jpeg_idct_14x14 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JCOEFPTR coef_block,
+		 JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*14];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    z1 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS-PASS1_BITS-1);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z2 = MULTIPLY(z4, FIX(1.274162392));         /* c4 */
+    z3 = MULTIPLY(z4, FIX(0.314692123));         /* c12 */
+    z4 = MULTIPLY(z4, FIX(0.881747734));         /* c8 */
+
+    tmp10 = z1 + z2;
+    tmp11 = z1 + z3;
+    tmp12 = z1 - z4;
+
+    tmp23 = RIGHT_SHIFT(z1 - ((z2 + z3 - z4) << 1), /* c0 = (c4+c12-c8)*2 */
+			CONST_BITS-PASS1_BITS);
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    z3 = MULTIPLY(z1 + z2, FIX(1.105676686));    /* c6 */
+
+    tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */
+    tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */
+    tmp15 = MULTIPLY(z1, FIX(0.613604268)) -     /* c10 */
+	    MULTIPLY(z2, FIX(1.378756276));      /* c2 */
+
+    tmp20 = tmp10 + tmp13;
+    tmp26 = tmp10 - tmp13;
+    tmp21 = tmp11 + tmp14;
+    tmp25 = tmp11 - tmp14;
+    tmp22 = tmp12 + tmp15;
+    tmp24 = tmp12 - tmp15;
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+    tmp13 = z4 << CONST_BITS;
+
+    tmp14 = z1 + z3;
+    tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607));           /* c3 */
+    tmp12 = MULTIPLY(tmp14, FIX(1.197448846));             /* c5 */
+    tmp10 = tmp11 + tmp12 + tmp13 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */
+    tmp14 = MULTIPLY(tmp14, FIX(0.752406978));             /* c9 */
+    tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426));        /* c9+c11-c13 */
+    z1    -= z2;
+    tmp15 = MULTIPLY(z1, FIX(0.467085129)) - tmp13;        /* c11 */
+    tmp16 += tmp15;
+    z1    += z4;
+    z4    = MULTIPLY(z2 + z3, - FIX(0.158341681)) - tmp13; /* -c13 */
+    tmp11 += z4 - MULTIPLY(z2, FIX(0.424103948));          /* c3-c9-c13 */
+    tmp12 += z4 - MULTIPLY(z3, FIX(2.373959773));          /* c3+c5-c13 */
+    z4    = MULTIPLY(z3 - z2, FIX(1.405321284));           /* c1 */
+    tmp14 += z4 + tmp13 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */
+    tmp15 += z4 + MULTIPLY(z2, FIX(0.674957567));          /* c1+c11-c5 */
+
+    tmp13 = (z1 - z3) << PASS1_BITS;
+
+    /* Final output stage */
+
+    wsptr[8*0]  = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*13] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*1]  = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*12] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*2]  = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*11] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*3]  = (int) (tmp23 + tmp13);
+    wsptr[8*10] = (int) (tmp23 - tmp13);
+    wsptr[8*4]  = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*9]  = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*5]  = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS);
+    wsptr[8*8]  = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS);
+    wsptr[8*6]  = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS);
+    wsptr[8*7]  = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 14 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 14; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    z1 <<= CONST_BITS;
+    z4 = (INT32) wsptr[4];
+    z2 = MULTIPLY(z4, FIX(1.274162392));         /* c4 */
+    z3 = MULTIPLY(z4, FIX(0.314692123));         /* c12 */
+    z4 = MULTIPLY(z4, FIX(0.881747734));         /* c8 */
+
+    tmp10 = z1 + z2;
+    tmp11 = z1 + z3;
+    tmp12 = z1 - z4;
+
+    tmp23 = z1 - ((z2 + z3 - z4) << 1);          /* c0 = (c4+c12-c8)*2 */
+
+    z1 = (INT32) wsptr[2];
+    z2 = (INT32) wsptr[6];
+
+    z3 = MULTIPLY(z1 + z2, FIX(1.105676686));    /* c6 */
+
+    tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */
+    tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */
+    tmp15 = MULTIPLY(z1, FIX(0.613604268)) -     /* c10 */
+	    MULTIPLY(z2, FIX(1.378756276));      /* c2 */
+
+    tmp20 = tmp10 + tmp13;
+    tmp26 = tmp10 - tmp13;
+    tmp21 = tmp11 + tmp14;
+    tmp25 = tmp11 - tmp14;
+    tmp22 = tmp12 + tmp15;
+    tmp24 = tmp12 - tmp15;
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    z4 = (INT32) wsptr[7];
+    z4 <<= CONST_BITS;
+
+    tmp14 = z1 + z3;
+    tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607));           /* c3 */
+    tmp12 = MULTIPLY(tmp14, FIX(1.197448846));             /* c5 */
+    tmp10 = tmp11 + tmp12 + z4 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */
+    tmp14 = MULTIPLY(tmp14, FIX(0.752406978));             /* c9 */
+    tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426));        /* c9+c11-c13 */
+    z1    -= z2;
+    tmp15 = MULTIPLY(z1, FIX(0.467085129)) - z4;           /* c11 */
+    tmp16 += tmp15;
+    tmp13 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - z4;    /* -c13 */
+    tmp11 += tmp13 - MULTIPLY(z2, FIX(0.424103948));       /* c3-c9-c13 */
+    tmp12 += tmp13 - MULTIPLY(z3, FIX(2.373959773));       /* c3+c5-c13 */
+    tmp13 = MULTIPLY(z3 - z2, FIX(1.405321284));           /* c1 */
+    tmp14 += tmp13 + z4 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */
+    tmp15 += tmp13 + MULTIPLY(z2, FIX(0.674957567));       /* c1+c11-c5 */
+
+    tmp13 = ((z1 - z3) << CONST_BITS) + z4;
+
+    /* Final output stage */
+
+    outptr[0]  = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[1]  = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[2]  = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[3]  = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[4]  = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[9]  = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[5]  = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[8]  = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[6]  = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[7]  = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+
+    wsptr += 8;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 15x15 output block.
+ *
+ * Optimized algorithm with 22 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/30).
+ */
+
+GLOBAL(void)
+jpeg_idct_15x15 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JCOEFPTR coef_block,
+		 JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*15];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    z1 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    tmp10 = MULTIPLY(z4, FIX(0.437016024)); /* c12 */
+    tmp11 = MULTIPLY(z4, FIX(1.144122806)); /* c6 */
+
+    tmp12 = z1 - tmp10;
+    tmp13 = z1 + tmp11;
+    z1 -= (tmp11 - tmp10) << 1;             /* c0 = (c6-c12)*2 */
+
+    z4 = z2 - z3;
+    z3 += z2;
+    tmp10 = MULTIPLY(z3, FIX(1.337628990)); /* (c2+c4)/2 */
+    tmp11 = MULTIPLY(z4, FIX(0.045680613)); /* (c2-c4)/2 */
+    z2 = MULTIPLY(z2, FIX(1.439773946));    /* c4+c14 */
+
+    tmp20 = tmp13 + tmp10 + tmp11;
+    tmp23 = tmp12 - tmp10 + tmp11 + z2;
+
+    tmp10 = MULTIPLY(z3, FIX(0.547059574)); /* (c8+c14)/2 */
+    tmp11 = MULTIPLY(z4, FIX(0.399234004)); /* (c8-c14)/2 */
+
+    tmp25 = tmp13 - tmp10 - tmp11;
+    tmp26 = tmp12 + tmp10 - tmp11 - z2;
+
+    tmp10 = MULTIPLY(z3, FIX(0.790569415)); /* (c6+c12)/2 */
+    tmp11 = MULTIPLY(z4, FIX(0.353553391)); /* (c6-c12)/2 */
+
+    tmp21 = tmp12 + tmp10 + tmp11;
+    tmp24 = tmp13 - tmp10 + tmp11;
+    tmp11 += tmp11;
+    tmp22 = z1 + tmp11;                     /* c10 = c6-c12 */
+    tmp27 = z1 - tmp11 - tmp11;             /* c0 = (c6-c12)*2 */
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    z3 = MULTIPLY(z4, FIX(1.224744871));                    /* c5 */
+    z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+
+    tmp13 = z2 - z4;
+    tmp15 = MULTIPLY(z1 + tmp13, FIX(0.831253876));         /* c9 */
+    tmp11 = tmp15 + MULTIPLY(z1, FIX(0.513743148));         /* c3-c9 */
+    tmp14 = tmp15 - MULTIPLY(tmp13, FIX(2.176250899));      /* c3+c9 */
+
+    tmp13 = MULTIPLY(z2, - FIX(0.831253876));               /* -c9 */
+    tmp15 = MULTIPLY(z2, - FIX(1.344997024));               /* -c3 */
+    z2 = z1 - z4;
+    tmp12 = z3 + MULTIPLY(z2, FIX(1.406466353));            /* c1 */
+
+    tmp10 = tmp12 + MULTIPLY(z4, FIX(2.457431844)) - tmp15; /* c1+c7 */
+    tmp16 = tmp12 - MULTIPLY(z1, FIX(1.112434820)) + tmp13; /* c1-c13 */
+    tmp12 = MULTIPLY(z2, FIX(1.224744871)) - z3;            /* c5 */
+    z2 = MULTIPLY(z1 + z4, FIX(0.575212477));               /* c11 */
+    tmp13 += z2 + MULTIPLY(z1, FIX(0.475753014)) - z3;      /* c7-c11 */
+    tmp15 += z2 - MULTIPLY(z4, FIX(0.869244010)) + z3;      /* c11+c13 */
+
+    /* Final output stage */
+
+    wsptr[8*0]  = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*14] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*1]  = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*13] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*2]  = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*12] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*3]  = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*11] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*4]  = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*10] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*5]  = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS);
+    wsptr[8*9]  = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS);
+    wsptr[8*6]  = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS);
+    wsptr[8*8]  = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS);
+    wsptr[8*7]  = (int) RIGHT_SHIFT(tmp27, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 15 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 15; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    z1 <<= CONST_BITS;
+
+    z2 = (INT32) wsptr[2];
+    z3 = (INT32) wsptr[4];
+    z4 = (INT32) wsptr[6];
+
+    tmp10 = MULTIPLY(z4, FIX(0.437016024)); /* c12 */
+    tmp11 = MULTIPLY(z4, FIX(1.144122806)); /* c6 */
+
+    tmp12 = z1 - tmp10;
+    tmp13 = z1 + tmp11;
+    z1 -= (tmp11 - tmp10) << 1;             /* c0 = (c6-c12)*2 */
+
+    z4 = z2 - z3;
+    z3 += z2;
+    tmp10 = MULTIPLY(z3, FIX(1.337628990)); /* (c2+c4)/2 */
+    tmp11 = MULTIPLY(z4, FIX(0.045680613)); /* (c2-c4)/2 */
+    z2 = MULTIPLY(z2, FIX(1.439773946));    /* c4+c14 */
+
+    tmp20 = tmp13 + tmp10 + tmp11;
+    tmp23 = tmp12 - tmp10 + tmp11 + z2;
+
+    tmp10 = MULTIPLY(z3, FIX(0.547059574)); /* (c8+c14)/2 */
+    tmp11 = MULTIPLY(z4, FIX(0.399234004)); /* (c8-c14)/2 */
+
+    tmp25 = tmp13 - tmp10 - tmp11;
+    tmp26 = tmp12 + tmp10 - tmp11 - z2;
+
+    tmp10 = MULTIPLY(z3, FIX(0.790569415)); /* (c6+c12)/2 */
+    tmp11 = MULTIPLY(z4, FIX(0.353553391)); /* (c6-c12)/2 */
+
+    tmp21 = tmp12 + tmp10 + tmp11;
+    tmp24 = tmp13 - tmp10 + tmp11;
+    tmp11 += tmp11;
+    tmp22 = z1 + tmp11;                     /* c10 = c6-c12 */
+    tmp27 = z1 - tmp11 - tmp11;             /* c0 = (c6-c12)*2 */
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z4 = (INT32) wsptr[5];
+    z3 = MULTIPLY(z4, FIX(1.224744871));                    /* c5 */
+    z4 = (INT32) wsptr[7];
+
+    tmp13 = z2 - z4;
+    tmp15 = MULTIPLY(z1 + tmp13, FIX(0.831253876));         /* c9 */
+    tmp11 = tmp15 + MULTIPLY(z1, FIX(0.513743148));         /* c3-c9 */
+    tmp14 = tmp15 - MULTIPLY(tmp13, FIX(2.176250899));      /* c3+c9 */
+
+    tmp13 = MULTIPLY(z2, - FIX(0.831253876));               /* -c9 */
+    tmp15 = MULTIPLY(z2, - FIX(1.344997024));               /* -c3 */
+    z2 = z1 - z4;
+    tmp12 = z3 + MULTIPLY(z2, FIX(1.406466353));            /* c1 */
+
+    tmp10 = tmp12 + MULTIPLY(z4, FIX(2.457431844)) - tmp15; /* c1+c7 */
+    tmp16 = tmp12 - MULTIPLY(z1, FIX(1.112434820)) + tmp13; /* c1-c13 */
+    tmp12 = MULTIPLY(z2, FIX(1.224744871)) - z3;            /* c5 */
+    z2 = MULTIPLY(z1 + z4, FIX(0.575212477));               /* c11 */
+    tmp13 += z2 + MULTIPLY(z1, FIX(0.475753014)) - z3;      /* c7-c11 */
+    tmp15 += z2 - MULTIPLY(z4, FIX(0.869244010)) + z3;      /* c11+c13 */
+
+    /* Final output stage */
+
+    outptr[0]  = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[1]  = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[2]  = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[3]  = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[4]  = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[5]  = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[9]  = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[6]  = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[8]  = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[7]  = range_limit[(int) RIGHT_SHIFT(tmp27,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+
+    wsptr += 8;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 16x16 output block.
+ *
+ * Optimized algorithm with 28 multiplications in the 1-D kernel.
+ * cK represents sqrt(2) * cos(K*pi/32).
+ */
+
+GLOBAL(void)
+jpeg_idct_16x16 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JCOEFPTR coef_block,
+		 JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*16];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp0 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp0 += 1 << (CONST_BITS-PASS1_BITS-1);
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    tmp1 = MULTIPLY(z1, FIX(1.306562965));      /* c4[16] = c2[8] */
+    tmp2 = MULTIPLY(z1, FIX_0_541196100);       /* c12[16] = c6[8] */
+
+    tmp10 = tmp0 + tmp1;
+    tmp11 = tmp0 - tmp1;
+    tmp12 = tmp0 + tmp2;
+    tmp13 = tmp0 - tmp2;
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+    z3 = z1 - z2;
+    z4 = MULTIPLY(z3, FIX(0.275899379));        /* c14[16] = c7[8] */
+    z3 = MULTIPLY(z3, FIX(1.387039845));        /* c2[16] = c1[8] */
+
+    tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447);  /* (c6+c2)[16] = (c3+c1)[8] */
+    tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223);  /* (c6-c14)[16] = (c3-c7)[8] */
+    tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */
+    tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */
+
+    tmp20 = tmp10 + tmp0;
+    tmp27 = tmp10 - tmp0;
+    tmp21 = tmp12 + tmp1;
+    tmp26 = tmp12 - tmp1;
+    tmp22 = tmp13 + tmp2;
+    tmp25 = tmp13 - tmp2;
+    tmp23 = tmp11 + tmp3;
+    tmp24 = tmp11 - tmp3;
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+
+    tmp11 = z1 + z3;
+
+    tmp1  = MULTIPLY(z1 + z2, FIX(1.353318001));   /* c3 */
+    tmp2  = MULTIPLY(tmp11,   FIX(1.247225013));   /* c5 */
+    tmp3  = MULTIPLY(z1 + z4, FIX(1.093201867));   /* c7 */
+    tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586));   /* c9 */
+    tmp11 = MULTIPLY(tmp11,   FIX(0.666655658));   /* c11 */
+    tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528));   /* c13 */
+    tmp0  = tmp1 + tmp2 + tmp3 -
+	    MULTIPLY(z1, FIX(2.286341144));        /* c7+c5+c3-c1 */
+    tmp13 = tmp10 + tmp11 + tmp12 -
+	    MULTIPLY(z1, FIX(1.835730603));        /* c9+c11+c13-c15 */
+    z1    = MULTIPLY(z2 + z3, FIX(0.138617169));   /* c15 */
+    tmp1  += z1 + MULTIPLY(z2, FIX(0.071888074));  /* c9+c11-c3-c15 */
+    tmp2  += z1 - MULTIPLY(z3, FIX(1.125726048));  /* c5+c7+c15-c3 */
+    z1    = MULTIPLY(z3 - z2, FIX(1.407403738));   /* c1 */
+    tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282));  /* c1+c11-c9-c13 */
+    tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411));  /* c1+c5+c13-c7 */
+    z2    += z4;
+    z1    = MULTIPLY(z2, - FIX(0.666655658));      /* -c11 */
+    tmp1  += z1;
+    tmp3  += z1 + MULTIPLY(z4, FIX(1.065388962));  /* c3+c11+c15-c7 */
+    z2    = MULTIPLY(z2, - FIX(1.247225013));      /* -c5 */
+    tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809));  /* c1+c5+c9-c13 */
+    tmp12 += z2;
+    z2    = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */
+    tmp2  += z2;
+    tmp3  += z2;
+    z2    = MULTIPLY(z4 - z3, FIX(0.410524528));   /* c13 */
+    tmp10 += z2;
+    tmp11 += z2;
+
+    /* Final output stage */
+
+    wsptr[8*0]  = (int) RIGHT_SHIFT(tmp20 + tmp0,  CONST_BITS-PASS1_BITS);
+    wsptr[8*15] = (int) RIGHT_SHIFT(tmp20 - tmp0,  CONST_BITS-PASS1_BITS);
+    wsptr[8*1]  = (int) RIGHT_SHIFT(tmp21 + tmp1,  CONST_BITS-PASS1_BITS);
+    wsptr[8*14] = (int) RIGHT_SHIFT(tmp21 - tmp1,  CONST_BITS-PASS1_BITS);
+    wsptr[8*2]  = (int) RIGHT_SHIFT(tmp22 + tmp2,  CONST_BITS-PASS1_BITS);
+    wsptr[8*13] = (int) RIGHT_SHIFT(tmp22 - tmp2,  CONST_BITS-PASS1_BITS);
+    wsptr[8*3]  = (int) RIGHT_SHIFT(tmp23 + tmp3,  CONST_BITS-PASS1_BITS);
+    wsptr[8*12] = (int) RIGHT_SHIFT(tmp23 - tmp3,  CONST_BITS-PASS1_BITS);
+    wsptr[8*4]  = (int) RIGHT_SHIFT(tmp24 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*11] = (int) RIGHT_SHIFT(tmp24 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*5]  = (int) RIGHT_SHIFT(tmp25 + tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*10] = (int) RIGHT_SHIFT(tmp25 - tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*6]  = (int) RIGHT_SHIFT(tmp26 + tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*9]  = (int) RIGHT_SHIFT(tmp26 - tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*7]  = (int) RIGHT_SHIFT(tmp27 + tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*8]  = (int) RIGHT_SHIFT(tmp27 - tmp13, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 16 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 16; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp0 <<= CONST_BITS;
+
+    z1 = (INT32) wsptr[4];
+    tmp1 = MULTIPLY(z1, FIX(1.306562965));      /* c4[16] = c2[8] */
+    tmp2 = MULTIPLY(z1, FIX_0_541196100);       /* c12[16] = c6[8] */
+
+    tmp10 = tmp0 + tmp1;
+    tmp11 = tmp0 - tmp1;
+    tmp12 = tmp0 + tmp2;
+    tmp13 = tmp0 - tmp2;
+
+    z1 = (INT32) wsptr[2];
+    z2 = (INT32) wsptr[6];
+    z3 = z1 - z2;
+    z4 = MULTIPLY(z3, FIX(0.275899379));        /* c14[16] = c7[8] */
+    z3 = MULTIPLY(z3, FIX(1.387039845));        /* c2[16] = c1[8] */
+
+    tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447);  /* (c6+c2)[16] = (c3+c1)[8] */
+    tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223);  /* (c6-c14)[16] = (c3-c7)[8] */
+    tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */
+    tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */
+
+    tmp20 = tmp10 + tmp0;
+    tmp27 = tmp10 - tmp0;
+    tmp21 = tmp12 + tmp1;
+    tmp26 = tmp12 - tmp1;
+    tmp22 = tmp13 + tmp2;
+    tmp25 = tmp13 - tmp2;
+    tmp23 = tmp11 + tmp3;
+    tmp24 = tmp11 - tmp3;
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    z4 = (INT32) wsptr[7];
+
+    tmp11 = z1 + z3;
+
+    tmp1  = MULTIPLY(z1 + z2, FIX(1.353318001));   /* c3 */
+    tmp2  = MULTIPLY(tmp11,   FIX(1.247225013));   /* c5 */
+    tmp3  = MULTIPLY(z1 + z4, FIX(1.093201867));   /* c7 */
+    tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586));   /* c9 */
+    tmp11 = MULTIPLY(tmp11,   FIX(0.666655658));   /* c11 */
+    tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528));   /* c13 */
+    tmp0  = tmp1 + tmp2 + tmp3 -
+	    MULTIPLY(z1, FIX(2.286341144));        /* c7+c5+c3-c1 */
+    tmp13 = tmp10 + tmp11 + tmp12 -
+	    MULTIPLY(z1, FIX(1.835730603));        /* c9+c11+c13-c15 */
+    z1    = MULTIPLY(z2 + z3, FIX(0.138617169));   /* c15 */
+    tmp1  += z1 + MULTIPLY(z2, FIX(0.071888074));  /* c9+c11-c3-c15 */
+    tmp2  += z1 - MULTIPLY(z3, FIX(1.125726048));  /* c5+c7+c15-c3 */
+    z1    = MULTIPLY(z3 - z2, FIX(1.407403738));   /* c1 */
+    tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282));  /* c1+c11-c9-c13 */
+    tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411));  /* c1+c5+c13-c7 */
+    z2    += z4;
+    z1    = MULTIPLY(z2, - FIX(0.666655658));      /* -c11 */
+    tmp1  += z1;
+    tmp3  += z1 + MULTIPLY(z4, FIX(1.065388962));  /* c3+c11+c15-c7 */
+    z2    = MULTIPLY(z2, - FIX(1.247225013));      /* -c5 */
+    tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809));  /* c1+c5+c9-c13 */
+    tmp12 += z2;
+    z2    = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */
+    tmp2  += z2;
+    tmp3  += z2;
+    z2    = MULTIPLY(z4 - z3, FIX(0.410524528));   /* c13 */
+    tmp10 += z2;
+    tmp11 += z2;
+
+    /* Final output stage */
+
+    outptr[0]  = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[15] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp0,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[1]  = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp1,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp1,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[2]  = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp2,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp2,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[3]  = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp3,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp3,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[4]  = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[5]  = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[6]  = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[9]  = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[7]  = range_limit[(int) RIGHT_SHIFT(tmp27 + tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[8]  = range_limit[(int) RIGHT_SHIFT(tmp27 - tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+
+    wsptr += 8;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 16x8 output block.
+ *
+ * 8-point IDCT in pass 1 (columns), 16-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_16x8 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		JCOEFPTR coef_block,
+		JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*8];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+  /* Note results are scaled up by sqrt(8) compared to a true IDCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = DCTSIZE; ctr > 0; ctr--) {
+    /* Due to quantization, we will usually find that many of the input
+     * coefficients are zero, especially the AC terms.  We can exploit this
+     * by short-circuiting the IDCT calculation for any column in which all
+     * the AC terms are zero.  In that case each output is equal to the
+     * DC coefficient (with scale factor as needed).
+     * With typical images and quantization tables, half or more of the
+     * column DCT calculations can be simplified this way.
+     */
+    
+    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
+	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
+	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
+	inptr[DCTSIZE*7] == 0) {
+      /* AC terms all zero */
+      int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
+      
+      wsptr[DCTSIZE*0] = dcval;
+      wsptr[DCTSIZE*1] = dcval;
+      wsptr[DCTSIZE*2] = dcval;
+      wsptr[DCTSIZE*3] = dcval;
+      wsptr[DCTSIZE*4] = dcval;
+      wsptr[DCTSIZE*5] = dcval;
+      wsptr[DCTSIZE*6] = dcval;
+      wsptr[DCTSIZE*7] = dcval;
+      
+      inptr++;			/* advance pointers to next column */
+      quantptr++;
+      wsptr++;
+      continue;
+    }
+    
+    /* Even part: reverse the even part of the forward DCT. */
+    /* The rotator is sqrt(2)*c(-6). */
+    
+    z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+    
+    z1 = MULTIPLY(z2 + z3, FIX_0_541196100);
+    tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865);
+    tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065);
+    
+    z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z2 <<= CONST_BITS;
+    z3 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    z2 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    tmp0 = z2 + z3;
+    tmp1 = z2 - z3;
+    
+    tmp10 = tmp0 + tmp2;
+    tmp13 = tmp0 - tmp2;
+    tmp11 = tmp1 + tmp3;
+    tmp12 = tmp1 - tmp3;
+    
+    /* Odd part per figure 8; the matrix is unitary and hence its
+     * transpose is its inverse.  i0..i3 are y7,y5,y3,y1 respectively.
+     */
+    
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+    tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    
+    z2 = tmp0 + tmp2;
+    z3 = tmp1 + tmp3;
+
+    z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */
+    z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
+    z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
+    z2 += z1;
+    z3 += z1;
+
+    z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
+    tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
+    tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
+    tmp0 += z1 + z2;
+    tmp3 += z1 + z3;
+
+    z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
+    tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
+    tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
+    tmp1 += z1 + z3;
+    tmp2 += z1 + z2;
+    
+    /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */
+    
+    wsptr[DCTSIZE*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[DCTSIZE*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS);
+    
+    inptr++;			/* advance pointers to next column */
+    quantptr++;
+    wsptr++;
+  }
+
+  /* Pass 2: process 8 rows from work array, store into output array.
+   * 16-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/32).
+   */
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp0 <<= CONST_BITS;
+
+    z1 = (INT32) wsptr[4];
+    tmp1 = MULTIPLY(z1, FIX(1.306562965));      /* c4[16] = c2[8] */
+    tmp2 = MULTIPLY(z1, FIX_0_541196100);       /* c12[16] = c6[8] */
+
+    tmp10 = tmp0 + tmp1;
+    tmp11 = tmp0 - tmp1;
+    tmp12 = tmp0 + tmp2;
+    tmp13 = tmp0 - tmp2;
+
+    z1 = (INT32) wsptr[2];
+    z2 = (INT32) wsptr[6];
+    z3 = z1 - z2;
+    z4 = MULTIPLY(z3, FIX(0.275899379));        /* c14[16] = c7[8] */
+    z3 = MULTIPLY(z3, FIX(1.387039845));        /* c2[16] = c1[8] */
+
+    tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447);  /* (c6+c2)[16] = (c3+c1)[8] */
+    tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223);  /* (c6-c14)[16] = (c3-c7)[8] */
+    tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */
+    tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */
+
+    tmp20 = tmp10 + tmp0;
+    tmp27 = tmp10 - tmp0;
+    tmp21 = tmp12 + tmp1;
+    tmp26 = tmp12 - tmp1;
+    tmp22 = tmp13 + tmp2;
+    tmp25 = tmp13 - tmp2;
+    tmp23 = tmp11 + tmp3;
+    tmp24 = tmp11 - tmp3;
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    z4 = (INT32) wsptr[7];
+
+    tmp11 = z1 + z3;
+
+    tmp1  = MULTIPLY(z1 + z2, FIX(1.353318001));   /* c3 */
+    tmp2  = MULTIPLY(tmp11,   FIX(1.247225013));   /* c5 */
+    tmp3  = MULTIPLY(z1 + z4, FIX(1.093201867));   /* c7 */
+    tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586));   /* c9 */
+    tmp11 = MULTIPLY(tmp11,   FIX(0.666655658));   /* c11 */
+    tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528));   /* c13 */
+    tmp0  = tmp1 + tmp2 + tmp3 -
+	    MULTIPLY(z1, FIX(2.286341144));        /* c7+c5+c3-c1 */
+    tmp13 = tmp10 + tmp11 + tmp12 -
+	    MULTIPLY(z1, FIX(1.835730603));        /* c9+c11+c13-c15 */
+    z1    = MULTIPLY(z2 + z3, FIX(0.138617169));   /* c15 */
+    tmp1  += z1 + MULTIPLY(z2, FIX(0.071888074));  /* c9+c11-c3-c15 */
+    tmp2  += z1 - MULTIPLY(z3, FIX(1.125726048));  /* c5+c7+c15-c3 */
+    z1    = MULTIPLY(z3 - z2, FIX(1.407403738));   /* c1 */
+    tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282));  /* c1+c11-c9-c13 */
+    tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411));  /* c1+c5+c13-c7 */
+    z2    += z4;
+    z1    = MULTIPLY(z2, - FIX(0.666655658));      /* -c11 */
+    tmp1  += z1;
+    tmp3  += z1 + MULTIPLY(z4, FIX(1.065388962));  /* c3+c11+c15-c7 */
+    z2    = MULTIPLY(z2, - FIX(1.247225013));      /* -c5 */
+    tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809));  /* c1+c5+c9-c13 */
+    tmp12 += z2;
+    z2    = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */
+    tmp2  += z2;
+    tmp3  += z2;
+    z2    = MULTIPLY(z4 - z3, FIX(0.410524528));   /* c13 */
+    tmp10 += z2;
+    tmp11 += z2;
+
+    /* Final output stage */
+
+    outptr[0]  = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[15] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp0,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[1]  = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp1,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp1,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[2]  = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp2,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp2,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[3]  = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp3,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp3,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[4]  = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[5]  = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[6]  = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[9]  = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[7]  = range_limit[(int) RIGHT_SHIFT(tmp27 + tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[8]  = range_limit[(int) RIGHT_SHIFT(tmp27 - tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+
+    wsptr += 8;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 14x7 output block.
+ *
+ * 7-point IDCT in pass 1 (columns), 14-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_14x7 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		JCOEFPTR coef_block,
+		JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*7];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array.
+   * 7-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/14).
+   */
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp23 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp23 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp23 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    tmp20 = MULTIPLY(z2 - z3, FIX(0.881747734));       /* c4 */
+    tmp22 = MULTIPLY(z1 - z2, FIX(0.314692123));       /* c6 */
+    tmp21 = tmp20 + tmp22 + tmp23 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */
+    tmp10 = z1 + z3;
+    z2 -= tmp10;
+    tmp10 = MULTIPLY(tmp10, FIX(1.274162392)) + tmp23; /* c2 */
+    tmp20 += tmp10 - MULTIPLY(z3, FIX(0.077722536));   /* c2-c4-c6 */
+    tmp22 += tmp10 - MULTIPLY(z1, FIX(2.470602249));   /* c2+c4+c6 */
+    tmp23 += MULTIPLY(z2, FIX(1.414213562));           /* c0 */
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+
+    tmp11 = MULTIPLY(z1 + z2, FIX(0.935414347));       /* (c3+c1-c5)/2 */
+    tmp12 = MULTIPLY(z1 - z2, FIX(0.170262339));       /* (c3+c5-c1)/2 */
+    tmp10 = tmp11 - tmp12;
+    tmp11 += tmp12;
+    tmp12 = MULTIPLY(z2 + z3, - FIX(1.378756276));     /* -c1 */
+    tmp11 += tmp12;
+    z2 = MULTIPLY(z1 + z3, FIX(0.613604268));          /* c5 */
+    tmp10 += z2;
+    tmp12 += z2 + MULTIPLY(z3, FIX(1.870828693));      /* c3+c1-c5 */
+
+    /* Final output stage */
+
+    wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*6] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*5] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*4] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*3] = (int) RIGHT_SHIFT(tmp23, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 7 rows from work array, store into output array.
+   * 14-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/28).
+   */
+  wsptr = workspace;
+  for (ctr = 0; ctr < 7; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    z1 <<= CONST_BITS;
+    z4 = (INT32) wsptr[4];
+    z2 = MULTIPLY(z4, FIX(1.274162392));         /* c4 */
+    z3 = MULTIPLY(z4, FIX(0.314692123));         /* c12 */
+    z4 = MULTIPLY(z4, FIX(0.881747734));         /* c8 */
+
+    tmp10 = z1 + z2;
+    tmp11 = z1 + z3;
+    tmp12 = z1 - z4;
+
+    tmp23 = z1 - ((z2 + z3 - z4) << 1);          /* c0 = (c4+c12-c8)*2 */
+
+    z1 = (INT32) wsptr[2];
+    z2 = (INT32) wsptr[6];
+
+    z3 = MULTIPLY(z1 + z2, FIX(1.105676686));    /* c6 */
+
+    tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */
+    tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */
+    tmp15 = MULTIPLY(z1, FIX(0.613604268)) -     /* c10 */
+	    MULTIPLY(z2, FIX(1.378756276));      /* c2 */
+
+    tmp20 = tmp10 + tmp13;
+    tmp26 = tmp10 - tmp13;
+    tmp21 = tmp11 + tmp14;
+    tmp25 = tmp11 - tmp14;
+    tmp22 = tmp12 + tmp15;
+    tmp24 = tmp12 - tmp15;
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    z4 = (INT32) wsptr[7];
+    z4 <<= CONST_BITS;
+
+    tmp14 = z1 + z3;
+    tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607));           /* c3 */
+    tmp12 = MULTIPLY(tmp14, FIX(1.197448846));             /* c5 */
+    tmp10 = tmp11 + tmp12 + z4 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */
+    tmp14 = MULTIPLY(tmp14, FIX(0.752406978));             /* c9 */
+    tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426));        /* c9+c11-c13 */
+    z1    -= z2;
+    tmp15 = MULTIPLY(z1, FIX(0.467085129)) - z4;           /* c11 */
+    tmp16 += tmp15;
+    tmp13 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - z4;    /* -c13 */
+    tmp11 += tmp13 - MULTIPLY(z2, FIX(0.424103948));       /* c3-c9-c13 */
+    tmp12 += tmp13 - MULTIPLY(z3, FIX(2.373959773));       /* c3+c5-c13 */
+    tmp13 = MULTIPLY(z3 - z2, FIX(1.405321284));           /* c1 */
+    tmp14 += tmp13 + z4 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */
+    tmp15 += tmp13 + MULTIPLY(z2, FIX(0.674957567));       /* c1+c11-c5 */
+
+    tmp13 = ((z1 - z3) << CONST_BITS) + z4;
+
+    /* Final output stage */
+
+    outptr[0]  = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[1]  = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[2]  = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[3]  = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[4]  = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[9]  = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[5]  = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[8]  = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[6]  = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[7]  = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+
+    wsptr += 8;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 12x6 output block.
+ *
+ * 6-point IDCT in pass 1 (columns), 12-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_12x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		JCOEFPTR coef_block,
+		JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*6];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array.
+   * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12).
+   */
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp10 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp10 += ONE << (CONST_BITS-PASS1_BITS-1);
+    tmp12 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    tmp20 = MULTIPLY(tmp12, FIX(0.707106781));   /* c4 */
+    tmp11 = tmp10 + tmp20;
+    tmp21 = RIGHT_SHIFT(tmp10 - tmp20 - tmp20, CONST_BITS-PASS1_BITS);
+    tmp20 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    tmp10 = MULTIPLY(tmp20, FIX(1.224744871));   /* c2 */
+    tmp20 = tmp11 + tmp10;
+    tmp22 = tmp11 - tmp10;
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    tmp11 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */
+    tmp10 = tmp11 + ((z1 + z2) << CONST_BITS);
+    tmp12 = tmp11 + ((z3 - z2) << CONST_BITS);
+    tmp11 = (z1 - z2 - z3) << PASS1_BITS;
+
+    /* Final output stage */
+
+    wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*5] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*1] = (int) (tmp21 + tmp11);
+    wsptr[8*4] = (int) (tmp21 - tmp11);
+    wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*3] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 6 rows from work array, store into output array.
+   * 12-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/24).
+   */
+  wsptr = workspace;
+  for (ctr = 0; ctr < 6; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    z3 <<= CONST_BITS;
+
+    z4 = (INT32) wsptr[4];
+    z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */
+
+    tmp10 = z3 + z4;
+    tmp11 = z3 - z4;
+
+    z1 = (INT32) wsptr[2];
+    z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */
+    z1 <<= CONST_BITS;
+    z2 = (INT32) wsptr[6];
+    z2 <<= CONST_BITS;
+
+    tmp12 = z1 - z2;
+
+    tmp21 = z3 + tmp12;
+    tmp24 = z3 - tmp12;
+
+    tmp12 = z4 + z2;
+
+    tmp20 = tmp10 + tmp12;
+    tmp25 = tmp10 - tmp12;
+
+    tmp12 = z4 - z1 - z2;
+
+    tmp22 = tmp11 + tmp12;
+    tmp23 = tmp11 - tmp12;
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    z4 = (INT32) wsptr[7];
+
+    tmp11 = MULTIPLY(z2, FIX(1.306562965));                  /* c3 */
+    tmp14 = MULTIPLY(z2, - FIX_0_541196100);                 /* -c9 */
+
+    tmp10 = z1 + z3;
+    tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669));          /* c7 */
+    tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384));       /* c5-c7 */
+    tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716));  /* c1-c5 */
+    tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580));           /* -(c7+c11) */
+    tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */
+    tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */
+    tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) -        /* c7-c11 */
+	     MULTIPLY(z4, FIX(1.982889723));                 /* c5+c7 */
+
+    z1 -= z4;
+    z2 -= z3;
+    z3 = MULTIPLY(z1 + z2, FIX_0_541196100);                 /* c9 */
+    tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865);              /* c3-c9 */
+    tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065);              /* c3+c9 */
+
+    /* Final output stage */
+
+    outptr[0]  = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[1]  = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[2]  = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[9]  = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[3]  = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[8]  = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[4]  = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[7]  = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[5]  = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+    outptr[6]  = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15,
+					       CONST_BITS+PASS1_BITS+3)
+			     & RANGE_MASK];
+
+    wsptr += 8;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 10x5 output block.
+ *
+ * 5-point IDCT in pass 1 (columns), 10-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_10x5 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		JCOEFPTR coef_block,
+		JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*5];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array.
+   * 5-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/10).
+   */
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp12 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp12 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp12 += ONE << (CONST_BITS-PASS1_BITS-1);
+    tmp13 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    tmp14 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z1 = MULTIPLY(tmp13 + tmp14, FIX(0.790569415)); /* (c2+c4)/2 */
+    z2 = MULTIPLY(tmp13 - tmp14, FIX(0.353553391)); /* (c2-c4)/2 */
+    z3 = tmp12 + z2;
+    tmp10 = z3 + z1;
+    tmp11 = z3 - z1;
+    tmp12 -= z2 << 2;
+
+    /* Odd part */
+
+    z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+
+    z1 = MULTIPLY(z2 + z3, FIX(0.831253876));       /* c3 */
+    tmp13 = z1 + MULTIPLY(z2, FIX(0.513743148));    /* c1-c3 */
+    tmp14 = z1 - MULTIPLY(z3, FIX(2.176250899));    /* c1+c3 */
+
+    /* Final output stage */
+
+    wsptr[8*0] = (int) RIGHT_SHIFT(tmp10 + tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*4] = (int) RIGHT_SHIFT(tmp10 - tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*1] = (int) RIGHT_SHIFT(tmp11 + tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*3] = (int) RIGHT_SHIFT(tmp11 - tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[8*2] = (int) RIGHT_SHIFT(tmp12, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 5 rows from work array, store into output array.
+   * 10-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/20).
+   */
+  wsptr = workspace;
+  for (ctr = 0; ctr < 5; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    z3 <<= CONST_BITS;
+    z4 = (INT32) wsptr[4];
+    z1 = MULTIPLY(z4, FIX(1.144122806));         /* c4 */
+    z2 = MULTIPLY(z4, FIX(0.437016024));         /* c8 */
+    tmp10 = z3 + z1;
+    tmp11 = z3 - z2;
+
+    tmp22 = z3 - ((z1 - z2) << 1);               /* c0 = (c4-c8)*2 */
+
+    z2 = (INT32) wsptr[2];
+    z3 = (INT32) wsptr[6];
+
+    z1 = MULTIPLY(z2 + z3, FIX(0.831253876));    /* c6 */
+    tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */
+    tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */
+
+    tmp20 = tmp10 + tmp12;
+    tmp24 = tmp10 - tmp12;
+    tmp21 = tmp11 + tmp13;
+    tmp23 = tmp11 - tmp13;
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    z3 <<= CONST_BITS;
+    z4 = (INT32) wsptr[7];
+
+    tmp11 = z2 + z4;
+    tmp13 = z2 - z4;
+
+    tmp12 = MULTIPLY(tmp13, FIX(0.309016994));        /* (c3-c7)/2 */
+
+    z2 = MULTIPLY(tmp11, FIX(0.951056516));           /* (c3+c7)/2 */
+    z4 = z3 + tmp12;
+
+    tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */
+    tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */
+
+    z2 = MULTIPLY(tmp11, FIX(0.587785252));           /* (c1-c9)/2 */
+    z4 = z3 - tmp12 - (tmp13 << (CONST_BITS - 1));
+
+    tmp12 = ((z1 - tmp13) << CONST_BITS) - z3;
+
+    tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */
+    tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 8;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 8x4 output block.
+ *
+ * 4-point IDCT in pass 1 (columns), 8-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_8x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3;
+  INT32 tmp10, tmp11, tmp12, tmp13;
+  INT32 z1, z2, z3;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*4];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array.
+   * 4-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16).
+   */
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+
+    tmp10 = (tmp0 + tmp2) << PASS1_BITS;
+    tmp12 = (tmp0 - tmp2) << PASS1_BITS;
+
+    /* Odd part */
+    /* Same rotation as in the even part of the 8x8 LL&M IDCT */
+
+    z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+
+    z1 = MULTIPLY(z2 + z3, FIX_0_541196100);               /* c6 */
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS-PASS1_BITS-1);
+    tmp0 = RIGHT_SHIFT(z1 + MULTIPLY(z2, FIX_0_765366865), /* c2-c6 */
+		       CONST_BITS-PASS1_BITS);
+    tmp2 = RIGHT_SHIFT(z1 - MULTIPLY(z3, FIX_1_847759065), /* c2+c6 */
+		       CONST_BITS-PASS1_BITS);
+
+    /* Final output stage */
+
+    wsptr[8*0] = (int) (tmp10 + tmp0);
+    wsptr[8*3] = (int) (tmp10 - tmp0);
+    wsptr[8*1] = (int) (tmp12 + tmp2);
+    wsptr[8*2] = (int) (tmp12 - tmp2);
+  }
+
+  /* Pass 2: process rows from work array, store into output array. */
+  /* Note that we must descale the results by a factor of 8 == 2**3, */
+  /* and also undo the PASS1_BITS scaling. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 4; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part: reverse the even part of the forward DCT. */
+    /* The rotator is sqrt(2)*c(-6). */
+
+    z2 = (INT32) wsptr[2];
+    z3 = (INT32) wsptr[6];
+    
+    z1 = MULTIPLY(z2 + z3, FIX_0_541196100);
+    tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865);
+    tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065);
+    
+    /* Add fudge factor here for final descale. */
+    z2 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    z3 = (INT32) wsptr[4];
+    
+    tmp0 = (z2 + z3) << CONST_BITS;
+    tmp1 = (z2 - z3) << CONST_BITS;
+    
+    tmp10 = tmp0 + tmp2;
+    tmp13 = tmp0 - tmp2;
+    tmp11 = tmp1 + tmp3;
+    tmp12 = tmp1 - tmp3;
+
+    /* Odd part per figure 8; the matrix is unitary and hence its
+     * transpose is its inverse.  i0..i3 are y7,y5,y3,y1 respectively.
+     */
+
+    tmp0 = (INT32) wsptr[7];
+    tmp1 = (INT32) wsptr[5];
+    tmp2 = (INT32) wsptr[3];
+    tmp3 = (INT32) wsptr[1];
+
+    z2 = tmp0 + tmp2;
+    z3 = tmp1 + tmp3;
+
+    z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */
+    z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
+    z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
+    z2 += z1;
+    z3 += z1;
+
+    z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
+    tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
+    tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
+    tmp0 += z1 + z2;
+    tmp3 += z1 + z3;
+
+    z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
+    tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
+    tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
+    tmp1 += z1 + z3;
+    tmp2 += z1 + z2;
+
+    /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += DCTSIZE;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a reduced-size 6x3 output block.
+ *
+ * 3-point IDCT in pass 1 (columns), 6-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_6x3 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12;
+  INT32 z1, z2, z3;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[6*3];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array.
+   * 3-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/6).
+   */
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp0 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp0 += ONE << (CONST_BITS-PASS1_BITS-1);
+    tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */
+    tmp10 = tmp0 + tmp12;
+    tmp2 = tmp0 - tmp12 - tmp12;
+
+    /* Odd part */
+
+    tmp12 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */
+
+    /* Final output stage */
+
+    wsptr[6*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[6*2] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[6*1] = (int) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS);
+  }
+  
+  /* Pass 2: process 3 rows from work array, store into output array.
+   * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12).
+   */
+  wsptr = workspace;
+  for (ctr = 0; ctr < 3; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp0 <<= CONST_BITS;
+    tmp2 = (INT32) wsptr[4];
+    tmp10 = MULTIPLY(tmp2, FIX(0.707106781));   /* c4 */
+    tmp1 = tmp0 + tmp10;
+    tmp11 = tmp0 - tmp10 - tmp10;
+    tmp10 = (INT32) wsptr[2];
+    tmp0 = MULTIPLY(tmp10, FIX(1.224744871));   /* c2 */
+    tmp10 = tmp1 + tmp0;
+    tmp12 = tmp1 - tmp0;
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */
+    tmp0 = tmp1 + ((z1 + z2) << CONST_BITS);
+    tmp2 = tmp1 + ((z3 - z2) << CONST_BITS);
+    tmp1 = (z1 - z2 - z3) << CONST_BITS;
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 6;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 4x2 output block.
+ *
+ * 2-point IDCT in pass 1 (columns), 4-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_4x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp2, tmp10, tmp12;
+  INT32 z1, z2, z3;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  INT32 * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  INT32 workspace[4*2];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 4; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+
+    /* Odd part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+
+    /* Final output stage */
+
+    wsptr[4*0] = tmp10 + tmp0;
+    wsptr[4*1] = tmp10 - tmp0;
+  }
+
+  /* Pass 2: process 2 rows from work array, store into output array.
+   * 4-point IDCT kernel,
+   * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT].
+   */
+  wsptr = workspace;
+  for (ctr = 0; ctr < 2; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = wsptr[0] + (ONE << 2);
+    tmp2 = wsptr[2];
+
+    tmp10 = (tmp0 + tmp2) << CONST_BITS;
+    tmp12 = (tmp0 - tmp2) << CONST_BITS;
+
+    /* Odd part */
+    /* Same rotation as in the even part of the 8x8 LL&M IDCT */
+
+    z2 = wsptr[1];
+    z3 = wsptr[3];
+
+    z1 = MULTIPLY(z2 + z3, FIX_0_541196100);   /* c6 */
+    tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */
+    tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0,
+					      CONST_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0,
+					      CONST_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2,
+					      CONST_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2,
+					      CONST_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 4;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 2x1 output block.
+ *
+ * 1-point IDCT in pass 1 (columns), 2-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_2x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp10;
+  ISLOW_MULT_TYPE * quantptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  SHIFT_TEMPS
+
+  /* Pass 1: empty. */
+
+  /* Pass 2: process 1 row from input, store into output array. */
+
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  outptr = output_buf[0] + output_col;
+
+  /* Even part */
+
+  tmp10 = DEQUANTIZE(coef_block[0], quantptr[0]);
+  /* Add fudge factor here for final descale. */
+  tmp10 += ONE << 2;
+
+  /* Odd part */
+
+  tmp0 = DEQUANTIZE(coef_block[1], quantptr[1]);
+
+  /* Final output stage */
+
+  outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, 3) & RANGE_MASK];
+  outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, 3) & RANGE_MASK];
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 8x16 output block.
+ *
+ * 16-point IDCT in pass 1 (columns), 8-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_8x16 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		JCOEFPTR coef_block,
+		JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[8*16];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array.
+   * 16-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/32).
+   */
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp0 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp0 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    tmp1 = MULTIPLY(z1, FIX(1.306562965));      /* c4[16] = c2[8] */
+    tmp2 = MULTIPLY(z1, FIX_0_541196100);       /* c12[16] = c6[8] */
+
+    tmp10 = tmp0 + tmp1;
+    tmp11 = tmp0 - tmp1;
+    tmp12 = tmp0 + tmp2;
+    tmp13 = tmp0 - tmp2;
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+    z3 = z1 - z2;
+    z4 = MULTIPLY(z3, FIX(0.275899379));        /* c14[16] = c7[8] */
+    z3 = MULTIPLY(z3, FIX(1.387039845));        /* c2[16] = c1[8] */
+
+    tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447);  /* (c6+c2)[16] = (c3+c1)[8] */
+    tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223);  /* (c6-c14)[16] = (c3-c7)[8] */
+    tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */
+    tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */
+
+    tmp20 = tmp10 + tmp0;
+    tmp27 = tmp10 - tmp0;
+    tmp21 = tmp12 + tmp1;
+    tmp26 = tmp12 - tmp1;
+    tmp22 = tmp13 + tmp2;
+    tmp25 = tmp13 - tmp2;
+    tmp23 = tmp11 + tmp3;
+    tmp24 = tmp11 - tmp3;
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+
+    tmp11 = z1 + z3;
+
+    tmp1  = MULTIPLY(z1 + z2, FIX(1.353318001));   /* c3 */
+    tmp2  = MULTIPLY(tmp11,   FIX(1.247225013));   /* c5 */
+    tmp3  = MULTIPLY(z1 + z4, FIX(1.093201867));   /* c7 */
+    tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586));   /* c9 */
+    tmp11 = MULTIPLY(tmp11,   FIX(0.666655658));   /* c11 */
+    tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528));   /* c13 */
+    tmp0  = tmp1 + tmp2 + tmp3 -
+	    MULTIPLY(z1, FIX(2.286341144));        /* c7+c5+c3-c1 */
+    tmp13 = tmp10 + tmp11 + tmp12 -
+	    MULTIPLY(z1, FIX(1.835730603));        /* c9+c11+c13-c15 */
+    z1    = MULTIPLY(z2 + z3, FIX(0.138617169));   /* c15 */
+    tmp1  += z1 + MULTIPLY(z2, FIX(0.071888074));  /* c9+c11-c3-c15 */
+    tmp2  += z1 - MULTIPLY(z3, FIX(1.125726048));  /* c5+c7+c15-c3 */
+    z1    = MULTIPLY(z3 - z2, FIX(1.407403738));   /* c1 */
+    tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282));  /* c1+c11-c9-c13 */
+    tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411));  /* c1+c5+c13-c7 */
+    z2    += z4;
+    z1    = MULTIPLY(z2, - FIX(0.666655658));      /* -c11 */
+    tmp1  += z1;
+    tmp3  += z1 + MULTIPLY(z4, FIX(1.065388962));  /* c3+c11+c15-c7 */
+    z2    = MULTIPLY(z2, - FIX(1.247225013));      /* -c5 */
+    tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809));  /* c1+c5+c9-c13 */
+    tmp12 += z2;
+    z2    = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */
+    tmp2  += z2;
+    tmp3  += z2;
+    z2    = MULTIPLY(z4 - z3, FIX(0.410524528));   /* c13 */
+    tmp10 += z2;
+    tmp11 += z2;
+
+    /* Final output stage */
+
+    wsptr[8*0]  = (int) RIGHT_SHIFT(tmp20 + tmp0,  CONST_BITS-PASS1_BITS);
+    wsptr[8*15] = (int) RIGHT_SHIFT(tmp20 - tmp0,  CONST_BITS-PASS1_BITS);
+    wsptr[8*1]  = (int) RIGHT_SHIFT(tmp21 + tmp1,  CONST_BITS-PASS1_BITS);
+    wsptr[8*14] = (int) RIGHT_SHIFT(tmp21 - tmp1,  CONST_BITS-PASS1_BITS);
+    wsptr[8*2]  = (int) RIGHT_SHIFT(tmp22 + tmp2,  CONST_BITS-PASS1_BITS);
+    wsptr[8*13] = (int) RIGHT_SHIFT(tmp22 - tmp2,  CONST_BITS-PASS1_BITS);
+    wsptr[8*3]  = (int) RIGHT_SHIFT(tmp23 + tmp3,  CONST_BITS-PASS1_BITS);
+    wsptr[8*12] = (int) RIGHT_SHIFT(tmp23 - tmp3,  CONST_BITS-PASS1_BITS);
+    wsptr[8*4]  = (int) RIGHT_SHIFT(tmp24 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*11] = (int) RIGHT_SHIFT(tmp24 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[8*5]  = (int) RIGHT_SHIFT(tmp25 + tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*10] = (int) RIGHT_SHIFT(tmp25 - tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[8*6]  = (int) RIGHT_SHIFT(tmp26 + tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*9]  = (int) RIGHT_SHIFT(tmp26 - tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[8*7]  = (int) RIGHT_SHIFT(tmp27 + tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[8*8]  = (int) RIGHT_SHIFT(tmp27 - tmp13, CONST_BITS-PASS1_BITS);
+  }
+  
+  /* Pass 2: process rows from work array, store into output array. */
+  /* Note that we must descale the results by a factor of 8 == 2**3, */
+  /* and also undo the PASS1_BITS scaling. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 16; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+    
+    /* Even part: reverse the even part of the forward DCT. */
+    /* The rotator is sqrt(2)*c(-6). */
+    
+    z2 = (INT32) wsptr[2];
+    z3 = (INT32) wsptr[6];
+    
+    z1 = MULTIPLY(z2 + z3, FIX_0_541196100);
+    tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865);
+    tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065);
+    
+    /* Add fudge factor here for final descale. */
+    z2 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    z3 = (INT32) wsptr[4];
+    
+    tmp0 = (z2 + z3) << CONST_BITS;
+    tmp1 = (z2 - z3) << CONST_BITS;
+    
+    tmp10 = tmp0 + tmp2;
+    tmp13 = tmp0 - tmp2;
+    tmp11 = tmp1 + tmp3;
+    tmp12 = tmp1 - tmp3;
+    
+    /* Odd part per figure 8; the matrix is unitary and hence its
+     * transpose is its inverse.  i0..i3 are y7,y5,y3,y1 respectively.
+     */
+    
+    tmp0 = (INT32) wsptr[7];
+    tmp1 = (INT32) wsptr[5];
+    tmp2 = (INT32) wsptr[3];
+    tmp3 = (INT32) wsptr[1];
+    
+    z2 = tmp0 + tmp2;
+    z3 = tmp1 + tmp3;
+
+    z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */
+    z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
+    z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
+    z2 += z1;
+    z3 += z1;
+
+    z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
+    tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
+    tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
+    tmp0 += z1 + z2;
+    tmp3 += z1 + z3;
+
+    z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
+    tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
+    tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
+    tmp1 += z1 + z3;
+    tmp2 += z1 + z2;
+    
+    /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */
+    
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    
+    wsptr += DCTSIZE;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 7x14 output block.
+ *
+ * 14-point IDCT in pass 1 (columns), 7-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_7x14 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		JCOEFPTR coef_block,
+		JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[7*14];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array.
+   * 14-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/28).
+   */
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 7; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    z1 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    z1 += ONE << (CONST_BITS-PASS1_BITS-1);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z2 = MULTIPLY(z4, FIX(1.274162392));         /* c4 */
+    z3 = MULTIPLY(z4, FIX(0.314692123));         /* c12 */
+    z4 = MULTIPLY(z4, FIX(0.881747734));         /* c8 */
+
+    tmp10 = z1 + z2;
+    tmp11 = z1 + z3;
+    tmp12 = z1 - z4;
+
+    tmp23 = RIGHT_SHIFT(z1 - ((z2 + z3 - z4) << 1), /* c0 = (c4+c12-c8)*2 */
+			CONST_BITS-PASS1_BITS);
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    z3 = MULTIPLY(z1 + z2, FIX(1.105676686));    /* c6 */
+
+    tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */
+    tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */
+    tmp15 = MULTIPLY(z1, FIX(0.613604268)) -     /* c10 */
+	    MULTIPLY(z2, FIX(1.378756276));      /* c2 */
+
+    tmp20 = tmp10 + tmp13;
+    tmp26 = tmp10 - tmp13;
+    tmp21 = tmp11 + tmp14;
+    tmp25 = tmp11 - tmp14;
+    tmp22 = tmp12 + tmp15;
+    tmp24 = tmp12 - tmp15;
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+    tmp13 = z4 << CONST_BITS;
+
+    tmp14 = z1 + z3;
+    tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607));           /* c3 */
+    tmp12 = MULTIPLY(tmp14, FIX(1.197448846));             /* c5 */
+    tmp10 = tmp11 + tmp12 + tmp13 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */
+    tmp14 = MULTIPLY(tmp14, FIX(0.752406978));             /* c9 */
+    tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426));        /* c9+c11-c13 */
+    z1    -= z2;
+    tmp15 = MULTIPLY(z1, FIX(0.467085129)) - tmp13;        /* c11 */
+    tmp16 += tmp15;
+    z1    += z4;
+    z4    = MULTIPLY(z2 + z3, - FIX(0.158341681)) - tmp13; /* -c13 */
+    tmp11 += z4 - MULTIPLY(z2, FIX(0.424103948));          /* c3-c9-c13 */
+    tmp12 += z4 - MULTIPLY(z3, FIX(2.373959773));          /* c3+c5-c13 */
+    z4    = MULTIPLY(z3 - z2, FIX(1.405321284));           /* c1 */
+    tmp14 += z4 + tmp13 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */
+    tmp15 += z4 + MULTIPLY(z2, FIX(0.674957567));          /* c1+c11-c5 */
+
+    tmp13 = (z1 - z3) << PASS1_BITS;
+
+    /* Final output stage */
+
+    wsptr[7*0]  = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[7*13] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[7*1]  = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[7*12] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[7*2]  = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[7*11] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[7*3]  = (int) (tmp23 + tmp13);
+    wsptr[7*10] = (int) (tmp23 - tmp13);
+    wsptr[7*4]  = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[7*9]  = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[7*5]  = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS);
+    wsptr[7*8]  = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS);
+    wsptr[7*6]  = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS);
+    wsptr[7*7]  = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 14 rows from work array, store into output array.
+   * 7-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/14).
+   */
+  wsptr = workspace;
+  for (ctr = 0; ctr < 14; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp23 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp23 <<= CONST_BITS;
+
+    z1 = (INT32) wsptr[2];
+    z2 = (INT32) wsptr[4];
+    z3 = (INT32) wsptr[6];
+
+    tmp20 = MULTIPLY(z2 - z3, FIX(0.881747734));       /* c4 */
+    tmp22 = MULTIPLY(z1 - z2, FIX(0.314692123));       /* c6 */
+    tmp21 = tmp20 + tmp22 + tmp23 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */
+    tmp10 = z1 + z3;
+    z2 -= tmp10;
+    tmp10 = MULTIPLY(tmp10, FIX(1.274162392)) + tmp23; /* c2 */
+    tmp20 += tmp10 - MULTIPLY(z3, FIX(0.077722536));   /* c2-c4-c6 */
+    tmp22 += tmp10 - MULTIPLY(z1, FIX(2.470602249));   /* c2+c4+c6 */
+    tmp23 += MULTIPLY(z2, FIX(1.414213562));           /* c0 */
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+
+    tmp11 = MULTIPLY(z1 + z2, FIX(0.935414347));       /* (c3+c1-c5)/2 */
+    tmp12 = MULTIPLY(z1 - z2, FIX(0.170262339));       /* (c3+c5-c1)/2 */
+    tmp10 = tmp11 - tmp12;
+    tmp11 += tmp12;
+    tmp12 = MULTIPLY(z2 + z3, - FIX(1.378756276));     /* -c1 */
+    tmp11 += tmp12;
+    z2 = MULTIPLY(z1 + z3, FIX(0.613604268));          /* c5 */
+    tmp10 += z2;
+    tmp12 += z2 + MULTIPLY(z3, FIX(1.870828693));      /* c3+c1-c5 */
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 7;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 6x12 output block.
+ *
+ * 12-point IDCT in pass 1 (columns), 6-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_6x12 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		JCOEFPTR coef_block,
+		JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25;
+  INT32 z1, z2, z3, z4;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[6*12];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array.
+   * 12-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/24).
+   */
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    z3 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    z3 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */
+
+    tmp10 = z3 + z4;
+    tmp11 = z3 - z4;
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */
+    z1 <<= CONST_BITS;
+    z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+    z2 <<= CONST_BITS;
+
+    tmp12 = z1 - z2;
+
+    tmp21 = z3 + tmp12;
+    tmp24 = z3 - tmp12;
+
+    tmp12 = z4 + z2;
+
+    tmp20 = tmp10 + tmp12;
+    tmp25 = tmp10 - tmp12;
+
+    tmp12 = z4 - z1 - z2;
+
+    tmp22 = tmp11 + tmp12;
+    tmp23 = tmp11 - tmp12;
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+
+    tmp11 = MULTIPLY(z2, FIX(1.306562965));                  /* c3 */
+    tmp14 = MULTIPLY(z2, - FIX_0_541196100);                 /* -c9 */
+
+    tmp10 = z1 + z3;
+    tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669));          /* c7 */
+    tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384));       /* c5-c7 */
+    tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716));  /* c1-c5 */
+    tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580));           /* -(c7+c11) */
+    tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */
+    tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */
+    tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) -        /* c7-c11 */
+	     MULTIPLY(z4, FIX(1.982889723));                 /* c5+c7 */
+
+    z1 -= z4;
+    z2 -= z3;
+    z3 = MULTIPLY(z1 + z2, FIX_0_541196100);                 /* c9 */
+    tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865);              /* c3-c9 */
+    tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065);              /* c3+c9 */
+
+    /* Final output stage */
+
+    wsptr[6*0]  = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[6*11] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[6*1]  = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[6*10] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[6*2]  = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[6*9]  = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS);
+    wsptr[6*3]  = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[6*8]  = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[6*4]  = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[6*7]  = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[6*5]  = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS);
+    wsptr[6*6]  = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 12 rows from work array, store into output array.
+   * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12).
+   */
+  wsptr = workspace;
+  for (ctr = 0; ctr < 12; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp10 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp10 <<= CONST_BITS;
+    tmp12 = (INT32) wsptr[4];
+    tmp20 = MULTIPLY(tmp12, FIX(0.707106781));   /* c4 */
+    tmp11 = tmp10 + tmp20;
+    tmp21 = tmp10 - tmp20 - tmp20;
+    tmp20 = (INT32) wsptr[2];
+    tmp10 = MULTIPLY(tmp20, FIX(1.224744871));   /* c2 */
+    tmp20 = tmp11 + tmp10;
+    tmp22 = tmp11 - tmp10;
+
+    /* Odd part */
+
+    z1 = (INT32) wsptr[1];
+    z2 = (INT32) wsptr[3];
+    z3 = (INT32) wsptr[5];
+    tmp11 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */
+    tmp10 = tmp11 + ((z1 + z2) << CONST_BITS);
+    tmp12 = tmp11 + ((z3 - z2) << CONST_BITS);
+    tmp11 = (z1 - z2 - z3) << CONST_BITS;
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 6;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 5x10 output block.
+ *
+ * 10-point IDCT in pass 1 (columns), 5-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_5x10 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		JCOEFPTR coef_block,
+		JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp10, tmp11, tmp12, tmp13, tmp14;
+  INT32 tmp20, tmp21, tmp22, tmp23, tmp24;
+  INT32 z1, z2, z3, z4, z5;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[5*10];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array.
+   * 10-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/20).
+   */
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 5; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    z3 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    z3 += ONE << (CONST_BITS-PASS1_BITS-1);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z1 = MULTIPLY(z4, FIX(1.144122806));         /* c4 */
+    z2 = MULTIPLY(z4, FIX(0.437016024));         /* c8 */
+    tmp10 = z3 + z1;
+    tmp11 = z3 - z2;
+
+    tmp22 = RIGHT_SHIFT(z3 - ((z1 - z2) << 1),   /* c0 = (c4-c8)*2 */
+			CONST_BITS-PASS1_BITS);
+
+    z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+
+    z1 = MULTIPLY(z2 + z3, FIX(0.831253876));    /* c6 */
+    tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */
+    tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */
+
+    tmp20 = tmp10 + tmp12;
+    tmp24 = tmp10 - tmp12;
+    tmp21 = tmp11 + tmp13;
+    tmp23 = tmp11 - tmp13;
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+
+    tmp11 = z2 + z4;
+    tmp13 = z2 - z4;
+
+    tmp12 = MULTIPLY(tmp13, FIX(0.309016994));        /* (c3-c7)/2 */
+    z5 = z3 << CONST_BITS;
+
+    z2 = MULTIPLY(tmp11, FIX(0.951056516));           /* (c3+c7)/2 */
+    z4 = z5 + tmp12;
+
+    tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */
+    tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */
+
+    z2 = MULTIPLY(tmp11, FIX(0.587785252));           /* (c1-c9)/2 */
+    z4 = z5 - tmp12 - (tmp13 << (CONST_BITS - 1));
+
+    tmp12 = (z1 - tmp13 - z3) << PASS1_BITS;
+
+    tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */
+    tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */
+
+    /* Final output stage */
+
+    wsptr[5*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[5*9] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS);
+    wsptr[5*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[5*8] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS);
+    wsptr[5*2] = (int) (tmp22 + tmp12);
+    wsptr[5*7] = (int) (tmp22 - tmp12);
+    wsptr[5*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[5*6] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS);
+    wsptr[5*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS);
+    wsptr[5*5] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 10 rows from work array, store into output array.
+   * 5-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/10).
+   */
+  wsptr = workspace;
+  for (ctr = 0; ctr < 10; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp12 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp12 <<= CONST_BITS;
+    tmp13 = (INT32) wsptr[2];
+    tmp14 = (INT32) wsptr[4];
+    z1 = MULTIPLY(tmp13 + tmp14, FIX(0.790569415)); /* (c2+c4)/2 */
+    z2 = MULTIPLY(tmp13 - tmp14, FIX(0.353553391)); /* (c2-c4)/2 */
+    z3 = tmp12 + z2;
+    tmp10 = z3 + z1;
+    tmp11 = z3 - z1;
+    tmp12 -= z2 << 2;
+
+    /* Odd part */
+
+    z2 = (INT32) wsptr[1];
+    z3 = (INT32) wsptr[3];
+
+    z1 = MULTIPLY(z2 + z3, FIX(0.831253876));       /* c3 */
+    tmp13 = z1 + MULTIPLY(z2, FIX(0.513743148));    /* c1-c3 */
+    tmp14 = z1 - MULTIPLY(z3, FIX(2.176250899));    /* c1+c3 */
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp13,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp13,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp14,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp14,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 5;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 4x8 output block.
+ *
+ * 8-point IDCT in pass 1 (columns), 4-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_4x8 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp3;
+  INT32 tmp10, tmp11, tmp12, tmp13;
+  INT32 z1, z2, z3;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[4*8];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array. */
+  /* Note results are scaled up by sqrt(8) compared to a true IDCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 4; ctr > 0; ctr--) {
+    /* Due to quantization, we will usually find that many of the input
+     * coefficients are zero, especially the AC terms.  We can exploit this
+     * by short-circuiting the IDCT calculation for any column in which all
+     * the AC terms are zero.  In that case each output is equal to the
+     * DC coefficient (with scale factor as needed).
+     * With typical images and quantization tables, half or more of the
+     * column DCT calculations can be simplified this way.
+     */
+
+    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
+	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
+	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
+	inptr[DCTSIZE*7] == 0) {
+      /* AC terms all zero */
+      int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
+
+      wsptr[4*0] = dcval;
+      wsptr[4*1] = dcval;
+      wsptr[4*2] = dcval;
+      wsptr[4*3] = dcval;
+      wsptr[4*4] = dcval;
+      wsptr[4*5] = dcval;
+      wsptr[4*6] = dcval;
+      wsptr[4*7] = dcval;
+
+      inptr++;			/* advance pointers to next column */
+      quantptr++;
+      wsptr++;
+      continue;
+    }
+
+    /* Even part: reverse the even part of the forward DCT. */
+    /* The rotator is sqrt(2)*c(-6). */
+
+    z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
+    
+    z1 = MULTIPLY(z2 + z3, FIX_0_541196100);
+    tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865);
+    tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065);
+    
+    z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    z2 <<= CONST_BITS;
+    z3 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    z2 += ONE << (CONST_BITS-PASS1_BITS-1);
+
+    tmp0 = z2 + z3;
+    tmp1 = z2 - z3;
+    
+    tmp10 = tmp0 + tmp2;
+    tmp13 = tmp0 - tmp2;
+    tmp11 = tmp1 + tmp3;
+    tmp12 = tmp1 - tmp3;
+
+    /* Odd part per figure 8; the matrix is unitary and hence its
+     * transpose is its inverse.  i0..i3 are y7,y5,y3,y1 respectively.
+     */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
+    tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+
+    z2 = tmp0 + tmp2;
+    z3 = tmp1 + tmp3;
+
+    z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */
+    z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
+    z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
+    z2 += z1;
+    z3 += z1;
+
+    z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
+    tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
+    tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
+    tmp0 += z1 + z2;
+    tmp3 += z1 + z3;
+
+    z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
+    tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
+    tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
+    tmp1 += z1 + z3;
+    tmp2 += z1 + z2;
+
+    /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */
+
+    wsptr[4*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS);
+    wsptr[4*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS);
+    wsptr[4*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS);
+    wsptr[4*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS);
+    wsptr[4*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS);
+    wsptr[4*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS);
+    wsptr[4*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[4*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS);
+
+    inptr++;			/* advance pointers to next column */
+    quantptr++;
+    wsptr++;
+  }
+
+  /* Pass 2: process 8 rows from work array, store into output array.
+   * 4-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16).
+   */
+  wsptr = workspace;
+  for (ctr = 0; ctr < 8; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp2 = (INT32) wsptr[2];
+
+    tmp10 = (tmp0 + tmp2) << CONST_BITS;
+    tmp12 = (tmp0 - tmp2) << CONST_BITS;
+
+    /* Odd part */
+    /* Same rotation as in the even part of the 8x8 LL&M IDCT */
+
+    z2 = (INT32) wsptr[1];
+    z3 = (INT32) wsptr[3];
+
+    z1 = MULTIPLY(z2 + z3, FIX_0_541196100);   /* c6 */
+    tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */
+    tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    
+    wsptr += 4;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a reduced-size 3x6 output block.
+ *
+ * 6-point IDCT in pass 1 (columns), 3-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_3x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12;
+  INT32 z1, z2, z3;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  int * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  int workspace[3*6];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array.
+   * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12).
+   */
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 3; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp0 <<= CONST_BITS;
+    /* Add fudge factor here for final descale. */
+    tmp0 += ONE << (CONST_BITS-PASS1_BITS-1);
+    tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]);
+    tmp10 = MULTIPLY(tmp2, FIX(0.707106781));   /* c4 */
+    tmp1 = tmp0 + tmp10;
+    tmp11 = RIGHT_SHIFT(tmp0 - tmp10 - tmp10, CONST_BITS-PASS1_BITS);
+    tmp10 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+    tmp0 = MULTIPLY(tmp10, FIX(1.224744871));   /* c2 */
+    tmp10 = tmp1 + tmp0;
+    tmp12 = tmp1 - tmp0;
+
+    /* Odd part */
+
+    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
+    tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */
+    tmp0 = tmp1 + ((z1 + z2) << CONST_BITS);
+    tmp2 = tmp1 + ((z3 - z2) << CONST_BITS);
+    tmp1 = (z1 - z2 - z3) << PASS1_BITS;
+
+    /* Final output stage */
+
+    wsptr[3*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[3*5] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS);
+    wsptr[3*1] = (int) (tmp11 + tmp1);
+    wsptr[3*4] = (int) (tmp11 - tmp1);
+    wsptr[3*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS);
+    wsptr[3*3] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS);
+  }
+
+  /* Pass 2: process 6 rows from work array, store into output array.
+   * 3-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/6).
+   */
+  wsptr = workspace;
+  for (ctr = 0; ctr < 6; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2));
+    tmp0 <<= CONST_BITS;
+    tmp2 = (INT32) wsptr[2];
+    tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */
+    tmp10 = tmp0 + tmp12;
+    tmp2 = tmp0 - tmp12 - tmp12;
+
+    /* Odd part */
+
+    tmp12 = (INT32) wsptr[1];
+    tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2,
+					      CONST_BITS+PASS1_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 3;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 2x4 output block.
+ *
+ * 4-point IDCT in pass 1 (columns), 2-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_2x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp2, tmp10, tmp12;
+  INT32 z1, z2, z3;
+  JCOEFPTR inptr;
+  ISLOW_MULT_TYPE * quantptr;
+  INT32 * wsptr;
+  JSAMPROW outptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  int ctr;
+  INT32 workspace[2*4];	/* buffers data between passes */
+  SHIFT_TEMPS
+
+  /* Pass 1: process columns from input, store into work array.
+   * 4-point IDCT kernel,
+   * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT].
+   */
+  inptr = coef_block;
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+  wsptr = workspace;
+  for (ctr = 0; ctr < 2; ctr++, inptr++, quantptr++, wsptr++) {
+    /* Even part */
+
+    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
+    tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
+
+    tmp10 = (tmp0 + tmp2) << CONST_BITS;
+    tmp12 = (tmp0 - tmp2) << CONST_BITS;
+
+    /* Odd part */
+    /* Same rotation as in the even part of the 8x8 LL&M IDCT */
+
+    z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
+    z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
+
+    z1 = MULTIPLY(z2 + z3, FIX_0_541196100);   /* c6 */
+    tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */
+    tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */
+
+    /* Final output stage */
+
+    wsptr[2*0] = tmp10 + tmp0;
+    wsptr[2*3] = tmp10 - tmp0;
+    wsptr[2*1] = tmp12 + tmp2;
+    wsptr[2*2] = tmp12 - tmp2;
+  }
+
+  /* Pass 2: process 4 rows from work array, store into output array. */
+
+  wsptr = workspace;
+  for (ctr = 0; ctr < 4; ctr++) {
+    outptr = output_buf[ctr] + output_col;
+
+    /* Even part */
+
+    /* Add fudge factor here for final descale. */
+    tmp10 = wsptr[0] + (ONE << (CONST_BITS+2));
+
+    /* Odd part */
+
+    tmp0 = wsptr[1];
+
+    /* Final output stage */
+
+    outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS+3)
+			    & RANGE_MASK];
+    outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS+3)
+			    & RANGE_MASK];
+
+    wsptr += 2;		/* advance pointer to next row */
+  }
+}
+
+
+/*
+ * Perform dequantization and inverse DCT on one block of coefficients,
+ * producing a 1x2 output block.
+ *
+ * 2-point IDCT in pass 1 (columns), 1-point in pass 2 (rows).
+ */
+
+GLOBAL(void)
+jpeg_idct_1x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	       JCOEFPTR coef_block,
+	       JSAMPARRAY output_buf, JDIMENSION output_col)
+{
+  INT32 tmp0, tmp10;
+  ISLOW_MULT_TYPE * quantptr;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  SHIFT_TEMPS
+
+  /* Process 1 column from input, store into output array. */
+
+  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
+
+  /* Even part */
+    
+  tmp10 = DEQUANTIZE(coef_block[DCTSIZE*0], quantptr[DCTSIZE*0]);
+  /* Add fudge factor here for final descale. */
+  tmp10 += ONE << 2;
+
+  /* Odd part */
+
+  tmp0 = DEQUANTIZE(coef_block[DCTSIZE*1], quantptr[DCTSIZE*1]);
+
+  /* Final output stage */
+
+  output_buf[0][output_col] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, 3)
+					  & RANGE_MASK];
+  output_buf[1][output_col] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, 3)
+					  & RANGE_MASK];
+}
+
+#endif /* IDCT_SCALING_SUPPORTED */
+#endif /* DCT_ISLOW_SUPPORTED */
diff --git a/jpeg-8d/jinclude.h b/jpeg-8d/jinclude.h
new file mode 100644
index 0000000..0a4f151
--- /dev/null
+++ b/jpeg-8d/jinclude.h
@@ -0,0 +1,91 @@
+/*
+ * jinclude.h
+ *
+ * Copyright (C) 1991-1994, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file exists to provide a single place to fix any problems with
+ * including the wrong system include files.  (Common problems are taken
+ * care of by the standard jconfig symbols, but on really weird systems
+ * you may have to edit this file.)
+ *
+ * NOTE: this file is NOT intended to be included by applications using the
+ * JPEG library.  Most applications need only include jpeglib.h.
+ */
+
+
+/* Include auto-config file to find out which system include files we need. */
+
+#include "jconfig.h"		/* auto configuration options */
+#define JCONFIG_INCLUDED	/* so that jpeglib.h doesn't do it again */
+
+/*
+ * We need the NULL macro and size_t typedef.
+ * On an ANSI-conforming system it is sufficient to include <stddef.h>.
+ * Otherwise, we get them from <stdlib.h> or <stdio.h>; we may have to
+ * pull in <sys/types.h> as well.
+ * Note that the core JPEG library does not require <stdio.h>;
+ * only the default error handler and data source/destination modules do.
+ * But we must pull it in because of the references to FILE in jpeglib.h.
+ * You can remove those references if you want to compile without <stdio.h>.
+ */
+
+#ifdef HAVE_STDDEF_H
+#include <stddef.h>
+#endif
+
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+
+#ifdef NEED_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+
+#include <stdio.h>
+
+/*
+ * We need memory copying and zeroing functions, plus strncpy().
+ * ANSI and System V implementations declare these in <string.h>.
+ * BSD doesn't have the mem() functions, but it does have bcopy()/bzero().
+ * Some systems may declare memset and memcpy in <memory.h>.
+ *
+ * NOTE: we assume the size parameters to these functions are of type size_t.
+ * Change the casts in these macros if not!
+ */
+
+#ifdef NEED_BSD_STRINGS
+
+#include <strings.h>
+#define MEMZERO(target,size)	bzero((void *)(target), (size_t)(size))
+#define MEMCOPY(dest,src,size)	bcopy((const void *)(src), (void *)(dest), (size_t)(size))
+
+#else /* not BSD, assume ANSI/SysV string lib */
+
+#include <string.h>
+#define MEMZERO(target,size)	memset((void *)(target), 0, (size_t)(size))
+#define MEMCOPY(dest,src,size)	memcpy((void *)(dest), (const void *)(src), (size_t)(size))
+
+#endif
+
+/*
+ * In ANSI C, and indeed any rational implementation, size_t is also the
+ * type returned by sizeof().  However, it seems there are some irrational
+ * implementations out there, in which sizeof() returns an int even though
+ * size_t is defined as long or unsigned long.  To ensure consistent results
+ * we always use this SIZEOF() macro in place of using sizeof() directly.
+ */
+
+#define SIZEOF(object)	((size_t) sizeof(object))
+
+/*
+ * The modules that use fread() and fwrite() always invoke them through
+ * these macros.  On some systems you may need to twiddle the argument casts.
+ * CAUTION: argument order is different from underlying functions!
+ */
+
+#define JFREAD(file,buf,sizeofbuf)  \
+  ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
+#define JFWRITE(file,buf,sizeofbuf)  \
+  ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
diff --git a/jpeg-8d/jmemansi.c b/jpeg-8d/jmemansi.c
new file mode 100644
index 0000000..2d93e49
--- /dev/null
+++ b/jpeg-8d/jmemansi.c
@@ -0,0 +1,167 @@
+/*
+ * jmemansi.c
+ *
+ * Copyright (C) 1992-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file provides a simple generic implementation of the system-
+ * dependent portion of the JPEG memory manager.  This implementation
+ * assumes that you have the ANSI-standard library routine tmpfile().
+ * Also, the problem of determining the amount of memory available
+ * is shoved onto the user.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jmemsys.h"		/* import the system-dependent declarations */
+
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc(),free() */
+extern void * malloc JPP((size_t size));
+extern void free JPP((void *ptr));
+#endif
+
+#ifndef SEEK_SET		/* pre-ANSI systems may not define this; */
+#define SEEK_SET  0		/* if not, assume 0 is correct */
+#endif
+
+
+/*
+ * Memory allocation and freeing are controlled by the regular library
+ * routines malloc() and free().
+ */
+
+GLOBAL(void *)
+jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void *) malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
+{
+  free(object);
+}
+
+
+/*
+ * "Large" objects are treated the same as "small" ones.
+ * NB: although we include FAR keywords in the routine declarations,
+ * this file won't actually work in 80x86 small/medium model; at least,
+ * you probably won't be able to process useful-size images in only 64KB.
+ */
+
+GLOBAL(void FAR *)
+jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void FAR *) malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
+{
+  free(object);
+}
+
+
+/*
+ * This routine computes the total memory space available for allocation.
+ * It's impossible to do this in a portable way; our current solution is
+ * to make the user tell us (with a default value set at compile time).
+ * If you can actually get the available space, it's a good idea to subtract
+ * a slop factor of 5% or so.
+ */
+
+#ifndef DEFAULT_MAX_MEM		/* so can override from makefile */
+#define DEFAULT_MAX_MEM		1000000L /* default: one megabyte */
+#endif
+
+GLOBAL(long)
+jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
+		    long max_bytes_needed, long already_allocated)
+{
+  return cinfo->mem->max_memory_to_use - already_allocated;
+}
+
+
+/*
+ * Backing store (temporary file) management.
+ * Backing store objects are only used when the value returned by
+ * jpeg_mem_available is less than the total space needed.  You can dispense
+ * with these routines if you have plenty of virtual memory; see jmemnobs.c.
+ */
+
+
+METHODDEF(void)
+read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		    void FAR * buffer_address,
+		    long file_offset, long byte_count)
+{
+  if (fseek(info->temp_file, file_offset, SEEK_SET))
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+  if (JFREAD(info->temp_file, buffer_address, byte_count)
+      != (size_t) byte_count)
+    ERREXIT(cinfo, JERR_TFILE_READ);
+}
+
+
+METHODDEF(void)
+write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		     void FAR * buffer_address,
+		     long file_offset, long byte_count)
+{
+  if (fseek(info->temp_file, file_offset, SEEK_SET))
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+  if (JFWRITE(info->temp_file, buffer_address, byte_count)
+      != (size_t) byte_count)
+    ERREXIT(cinfo, JERR_TFILE_WRITE);
+}
+
+
+METHODDEF(void)
+close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  fclose(info->temp_file);
+  /* Since this implementation uses tmpfile() to create the file,
+   * no explicit file deletion is needed.
+   */
+}
+
+
+/*
+ * Initial opening of a backing-store object.
+ *
+ * This version uses tmpfile(), which constructs a suitable file name
+ * behind the scenes.  We don't have to use info->temp_name[] at all;
+ * indeed, we can't even find out the actual name of the temp file.
+ */
+
+GLOBAL(void)
+jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+			 long total_bytes_needed)
+{
+  if ((info->temp_file = tmpfile()) == NULL)
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "");
+  info->read_backing_store = read_backing_store;
+  info->write_backing_store = write_backing_store;
+  info->close_backing_store = close_backing_store;
+}
+
+
+/*
+ * These routines take care of any system-dependent initialization and
+ * cleanup required.
+ */
+
+GLOBAL(long)
+jpeg_mem_init (j_common_ptr cinfo)
+{
+  return DEFAULT_MAX_MEM;	/* default for max_memory_to_use */
+}
+
+GLOBAL(void)
+jpeg_mem_term (j_common_ptr cinfo)
+{
+  /* no work */
+}
diff --git a/jpeg-8d/jmemdos.c b/jpeg-8d/jmemdos.c
new file mode 100644
index 0000000..60b45c6
--- /dev/null
+++ b/jpeg-8d/jmemdos.c
@@ -0,0 +1,638 @@
+/*
+ * jmemdos.c
+ *
+ * Copyright (C) 1992-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file provides an MS-DOS-compatible implementation of the system-
+ * dependent portion of the JPEG memory manager.  Temporary data can be
+ * stored in extended or expanded memory as well as in regular DOS files.
+ *
+ * If you use this file, you must be sure that NEED_FAR_POINTERS is defined
+ * if you compile in a small-data memory model; it should NOT be defined if
+ * you use a large-data memory model.  This file is not recommended if you
+ * are using a flat-memory-space 386 environment such as DJGCC or Watcom C.
+ * Also, this code will NOT work if struct fields are aligned on greater than
+ * 2-byte boundaries.
+ *
+ * Based on code contributed by Ge' Weijers.
+ */
+
+/*
+ * If you have both extended and expanded memory, you may want to change the
+ * order in which they are tried in jopen_backing_store.  On a 286 machine
+ * expanded memory is usually faster, since extended memory access involves
+ * an expensive protected-mode-and-back switch.  On 386 and better, extended
+ * memory is usually faster.  As distributed, the code tries extended memory
+ * first (what? not everyone has a 386? :-).
+ *
+ * You can disable use of extended/expanded memory entirely by altering these
+ * definitions or overriding them from the Makefile (eg, -DEMS_SUPPORTED=0).
+ */
+
+#ifndef XMS_SUPPORTED
+#define XMS_SUPPORTED  1
+#endif
+#ifndef EMS_SUPPORTED
+#define EMS_SUPPORTED  1
+#endif
+
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jmemsys.h"		/* import the system-dependent declarations */
+
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare these */
+extern void * malloc JPP((size_t size));
+extern void free JPP((void *ptr));
+extern char * getenv JPP((const char * name));
+#endif
+
+#ifdef NEED_FAR_POINTERS
+
+#ifdef __TURBOC__
+/* These definitions work for Borland C (Turbo C) */
+#include <alloc.h>		/* need farmalloc(), farfree() */
+#define far_malloc(x)	farmalloc(x)
+#define far_free(x)	farfree(x)
+#else
+/* These definitions work for Microsoft C and compatible compilers */
+#include <malloc.h>		/* need _fmalloc(), _ffree() */
+#define far_malloc(x)	_fmalloc(x)
+#define far_free(x)	_ffree(x)
+#endif
+
+#else /* not NEED_FAR_POINTERS */
+
+#define far_malloc(x)	malloc(x)
+#define far_free(x)	free(x)
+
+#endif /* NEED_FAR_POINTERS */
+
+#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
+#define READ_BINARY	"r"
+#else
+#define READ_BINARY	"rb"
+#endif
+
+#ifndef USE_MSDOS_MEMMGR	/* make sure user got configuration right */
+  You forgot to define USE_MSDOS_MEMMGR in jconfig.h. /* deliberate syntax error */
+#endif
+
+#if MAX_ALLOC_CHUNK >= 65535L	/* make sure jconfig.h got this right */
+  MAX_ALLOC_CHUNK should be less than 64K. /* deliberate syntax error */
+#endif
+
+
+/*
+ * Declarations for assembly-language support routines (see jmemdosa.asm).
+ *
+ * The functions are declared "far" as are all their pointer arguments;
+ * this ensures the assembly source code will work regardless of the
+ * compiler memory model.  We assume "short" is 16 bits, "long" is 32.
+ */
+
+typedef void far * XMSDRIVER;	/* actually a pointer to code */
+typedef struct {		/* registers for calling XMS driver */
+	unsigned short ax, dx, bx;
+	void far * ds_si;
+      } XMScontext;
+typedef struct {		/* registers for calling EMS driver */
+	unsigned short ax, dx, bx;
+	void far * ds_si;
+      } EMScontext;
+
+extern short far jdos_open JPP((short far * handle, char far * filename));
+extern short far jdos_close JPP((short handle));
+extern short far jdos_seek JPP((short handle, long offset));
+extern short far jdos_read JPP((short handle, void far * buffer,
+				unsigned short count));
+extern short far jdos_write JPP((short handle, void far * buffer,
+				 unsigned short count));
+extern void far jxms_getdriver JPP((XMSDRIVER far *));
+extern void far jxms_calldriver JPP((XMSDRIVER, XMScontext far *));
+extern short far jems_available JPP((void));
+extern void far jems_calldriver JPP((EMScontext far *));
+
+
+/*
+ * Selection of a file name for a temporary file.
+ * This is highly system-dependent, and you may want to customize it.
+ */
+
+static int next_file_num;	/* to distinguish among several temp files */
+
+LOCAL(void)
+select_file_name (char * fname)
+{
+  const char * env;
+  char * ptr;
+  FILE * tfile;
+
+  /* Keep generating file names till we find one that's not in use */
+  for (;;) {
+    /* Get temp directory name from environment TMP or TEMP variable;
+     * if none, use "."
+     */
+    if ((env = (const char *) getenv("TMP")) == NULL)
+      if ((env = (const char *) getenv("TEMP")) == NULL)
+	env = ".";
+    if (*env == '\0')		/* null string means "." */
+      env = ".";
+    ptr = fname;		/* copy name to fname */
+    while (*env != '\0')
+      *ptr++ = *env++;
+    if (ptr[-1] != '\\' && ptr[-1] != '/')
+      *ptr++ = '\\';		/* append backslash if not in env variable */
+    /* Append a suitable file name */
+    next_file_num++;		/* advance counter */
+    sprintf(ptr, "JPG%03d.TMP", next_file_num);
+    /* Probe to see if file name is already in use */
+    if ((tfile = fopen(fname, READ_BINARY)) == NULL)
+      break;
+    fclose(tfile);		/* oops, it's there; close tfile & try again */
+  }
+}
+
+
+/*
+ * Near-memory allocation and freeing are controlled by the regular library
+ * routines malloc() and free().
+ */
+
+GLOBAL(void *)
+jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void *) malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
+{
+  free(object);
+}
+
+
+/*
+ * "Large" objects are allocated in far memory, if possible
+ */
+
+GLOBAL(void FAR *)
+jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void FAR *) far_malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
+{
+  far_free(object);
+}
+
+
+/*
+ * This routine computes the total memory space available for allocation.
+ * It's impossible to do this in a portable way; our current solution is
+ * to make the user tell us (with a default value set at compile time).
+ * If you can actually get the available space, it's a good idea to subtract
+ * a slop factor of 5% or so.
+ */
+
+#ifndef DEFAULT_MAX_MEM		/* so can override from makefile */
+#define DEFAULT_MAX_MEM		300000L /* for total usage about 450K */
+#endif
+
+GLOBAL(long)
+jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
+		    long max_bytes_needed, long already_allocated)
+{
+  return cinfo->mem->max_memory_to_use - already_allocated;
+}
+
+
+/*
+ * Backing store (temporary file) management.
+ * Backing store objects are only used when the value returned by
+ * jpeg_mem_available is less than the total space needed.  You can dispense
+ * with these routines if you have plenty of virtual memory; see jmemnobs.c.
+ */
+
+/*
+ * For MS-DOS we support three types of backing storage:
+ *   1. Conventional DOS files.  We access these by direct DOS calls rather
+ *      than via the stdio package.  This provides a bit better performance,
+ *      but the real reason is that the buffers to be read or written are FAR.
+ *      The stdio library for small-data memory models can't cope with that.
+ *   2. Extended memory, accessed per the XMS V2.0 specification.
+ *   3. Expanded memory, accessed per the LIM/EMS 4.0 specification.
+ * You'll need copies of those specs to make sense of the related code.
+ * The specs are available by Internet FTP from the SIMTEL archives 
+ * (oak.oakland.edu and its various mirror sites).  See files
+ * pub/msdos/microsoft/xms20.arc and pub/msdos/info/limems41.zip.
+ */
+
+
+/*
+ * Access methods for a DOS file.
+ */
+
+
+METHODDEF(void)
+read_file_store (j_common_ptr cinfo, backing_store_ptr info,
+		 void FAR * buffer_address,
+		 long file_offset, long byte_count)
+{
+  if (jdos_seek(info->handle.file_handle, file_offset))
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+  /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */
+  if (byte_count > 65535L)	/* safety check */
+    ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK);
+  if (jdos_read(info->handle.file_handle, buffer_address,
+		(unsigned short) byte_count))
+    ERREXIT(cinfo, JERR_TFILE_READ);
+}
+
+
+METHODDEF(void)
+write_file_store (j_common_ptr cinfo, backing_store_ptr info,
+		  void FAR * buffer_address,
+		  long file_offset, long byte_count)
+{
+  if (jdos_seek(info->handle.file_handle, file_offset))
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+  /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */
+  if (byte_count > 65535L)	/* safety check */
+    ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK);
+  if (jdos_write(info->handle.file_handle, buffer_address,
+		 (unsigned short) byte_count))
+    ERREXIT(cinfo, JERR_TFILE_WRITE);
+}
+
+
+METHODDEF(void)
+close_file_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  jdos_close(info->handle.file_handle);	/* close the file */
+  remove(info->temp_name);	/* delete the file */
+/* If your system doesn't have remove(), try unlink() instead.
+ * remove() is the ANSI-standard name for this function, but
+ * unlink() was more common in pre-ANSI systems.
+ */
+  TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name);
+}
+
+
+LOCAL(boolean)
+open_file_store (j_common_ptr cinfo, backing_store_ptr info,
+		 long total_bytes_needed)
+{
+  short handle;
+
+  select_file_name(info->temp_name);
+  if (jdos_open((short far *) & handle, (char far *) info->temp_name)) {
+    /* might as well exit since jpeg_open_backing_store will fail anyway */
+    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
+    return FALSE;
+  }
+  info->handle.file_handle = handle;
+  info->read_backing_store = read_file_store;
+  info->write_backing_store = write_file_store;
+  info->close_backing_store = close_file_store;
+  TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
+  return TRUE;			/* succeeded */
+}
+
+
+/*
+ * Access methods for extended memory.
+ */
+
+#if XMS_SUPPORTED
+
+static XMSDRIVER xms_driver;	/* saved address of XMS driver */
+
+typedef union {			/* either long offset or real-mode pointer */
+	long offset;
+	void far * ptr;
+      } XMSPTR;
+
+typedef struct {		/* XMS move specification structure */
+	long length;
+	XMSH src_handle;
+	XMSPTR src;
+	XMSH dst_handle;
+	XMSPTR dst;
+      } XMSspec;
+
+#define ODD(X)	(((X) & 1L) != 0)
+
+
+METHODDEF(void)
+read_xms_store (j_common_ptr cinfo, backing_store_ptr info,
+		void FAR * buffer_address,
+		long file_offset, long byte_count)
+{
+  XMScontext ctx;
+  XMSspec spec;
+  char endbuffer[2];
+
+  /* The XMS driver can't cope with an odd length, so handle the last byte
+   * specially if byte_count is odd.  We don't expect this to be common.
+   */
+
+  spec.length = byte_count & (~ 1L);
+  spec.src_handle = info->handle.xms_handle;
+  spec.src.offset = file_offset;
+  spec.dst_handle = 0;
+  spec.dst.ptr = buffer_address;
+  
+  ctx.ds_si = (void far *) & spec;
+  ctx.ax = 0x0b00;		/* EMB move */
+  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
+  if (ctx.ax != 1)
+    ERREXIT(cinfo, JERR_XMS_READ);
+
+  if (ODD(byte_count)) {
+    read_xms_store(cinfo, info, (void FAR *) endbuffer,
+		   file_offset + byte_count - 1L, 2L);
+    ((char FAR *) buffer_address)[byte_count - 1L] = endbuffer[0];
+  }
+}
+
+
+METHODDEF(void)
+write_xms_store (j_common_ptr cinfo, backing_store_ptr info,
+		 void FAR * buffer_address,
+		 long file_offset, long byte_count)
+{
+  XMScontext ctx;
+  XMSspec spec;
+  char endbuffer[2];
+
+  /* The XMS driver can't cope with an odd length, so handle the last byte
+   * specially if byte_count is odd.  We don't expect this to be common.
+   */
+
+  spec.length = byte_count & (~ 1L);
+  spec.src_handle = 0;
+  spec.src.ptr = buffer_address;
+  spec.dst_handle = info->handle.xms_handle;
+  spec.dst.offset = file_offset;
+
+  ctx.ds_si = (void far *) & spec;
+  ctx.ax = 0x0b00;		/* EMB move */
+  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
+  if (ctx.ax != 1)
+    ERREXIT(cinfo, JERR_XMS_WRITE);
+
+  if (ODD(byte_count)) {
+    read_xms_store(cinfo, info, (void FAR *) endbuffer,
+		   file_offset + byte_count - 1L, 2L);
+    endbuffer[0] = ((char FAR *) buffer_address)[byte_count - 1L];
+    write_xms_store(cinfo, info, (void FAR *) endbuffer,
+		    file_offset + byte_count - 1L, 2L);
+  }
+}
+
+
+METHODDEF(void)
+close_xms_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  XMScontext ctx;
+
+  ctx.dx = info->handle.xms_handle;
+  ctx.ax = 0x0a00;
+  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
+  TRACEMS1(cinfo, 1, JTRC_XMS_CLOSE, info->handle.xms_handle);
+  /* we ignore any error return from the driver */
+}
+
+
+LOCAL(boolean)
+open_xms_store (j_common_ptr cinfo, backing_store_ptr info,
+		long total_bytes_needed)
+{
+  XMScontext ctx;
+
+  /* Get address of XMS driver */
+  jxms_getdriver((XMSDRIVER far *) & xms_driver);
+  if (xms_driver == NULL)
+    return FALSE;		/* no driver to be had */
+
+  /* Get version number, must be >= 2.00 */
+  ctx.ax = 0x0000;
+  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
+  if (ctx.ax < (unsigned short) 0x0200)
+    return FALSE;
+
+  /* Try to get space (expressed in kilobytes) */
+  ctx.dx = (unsigned short) ((total_bytes_needed + 1023L) >> 10);
+  ctx.ax = 0x0900;
+  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
+  if (ctx.ax != 1)
+    return FALSE;
+
+  /* Succeeded, save the handle and away we go */
+  info->handle.xms_handle = ctx.dx;
+  info->read_backing_store = read_xms_store;
+  info->write_backing_store = write_xms_store;
+  info->close_backing_store = close_xms_store;
+  TRACEMS1(cinfo, 1, JTRC_XMS_OPEN, ctx.dx);
+  return TRUE;			/* succeeded */
+}
+
+#endif /* XMS_SUPPORTED */
+
+
+/*
+ * Access methods for expanded memory.
+ */
+
+#if EMS_SUPPORTED
+
+/* The EMS move specification structure requires word and long fields aligned
+ * at odd byte boundaries.  Some compilers will align struct fields at even
+ * byte boundaries.  While it's usually possible to force byte alignment,
+ * that causes an overall performance penalty and may pose problems in merging
+ * JPEG into a larger application.  Instead we accept some rather dirty code
+ * here.  Note this code would fail if the hardware did not allow odd-byte
+ * word & long accesses, but all 80x86 CPUs do.
+ */
+
+typedef void far * EMSPTR;
+
+typedef union {			/* EMS move specification structure */
+	long length;		/* It's easy to access first 4 bytes */
+	char bytes[18];		/* Misaligned fields in here! */
+      } EMSspec;
+
+/* Macros for accessing misaligned fields */
+#define FIELD_AT(spec,offset,type)  (*((type *) &(spec.bytes[offset])))
+#define SRC_TYPE(spec)		FIELD_AT(spec,4,char)
+#define SRC_HANDLE(spec)	FIELD_AT(spec,5,EMSH)
+#define SRC_OFFSET(spec)	FIELD_AT(spec,7,unsigned short)
+#define SRC_PAGE(spec)		FIELD_AT(spec,9,unsigned short)
+#define SRC_PTR(spec)		FIELD_AT(spec,7,EMSPTR)
+#define DST_TYPE(spec)		FIELD_AT(spec,11,char)
+#define DST_HANDLE(spec)	FIELD_AT(spec,12,EMSH)
+#define DST_OFFSET(spec)	FIELD_AT(spec,14,unsigned short)
+#define DST_PAGE(spec)		FIELD_AT(spec,16,unsigned short)
+#define DST_PTR(spec)		FIELD_AT(spec,14,EMSPTR)
+
+#define EMSPAGESIZE	16384L	/* gospel, see the EMS specs */
+
+#define HIBYTE(W)  (((W) >> 8) & 0xFF)
+#define LOBYTE(W)  ((W) & 0xFF)
+
+
+METHODDEF(void)
+read_ems_store (j_common_ptr cinfo, backing_store_ptr info,
+		void FAR * buffer_address,
+		long file_offset, long byte_count)
+{
+  EMScontext ctx;
+  EMSspec spec;
+
+  spec.length = byte_count;
+  SRC_TYPE(spec) = 1;
+  SRC_HANDLE(spec) = info->handle.ems_handle;
+  SRC_PAGE(spec)   = (unsigned short) (file_offset / EMSPAGESIZE);
+  SRC_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE);
+  DST_TYPE(spec) = 0;
+  DST_HANDLE(spec) = 0;
+  DST_PTR(spec)    = buffer_address;
+  
+  ctx.ds_si = (void far *) & spec;
+  ctx.ax = 0x5700;		/* move memory region */
+  jems_calldriver((EMScontext far *) & ctx);
+  if (HIBYTE(ctx.ax) != 0)
+    ERREXIT(cinfo, JERR_EMS_READ);
+}
+
+
+METHODDEF(void)
+write_ems_store (j_common_ptr cinfo, backing_store_ptr info,
+		 void FAR * buffer_address,
+		 long file_offset, long byte_count)
+{
+  EMScontext ctx;
+  EMSspec spec;
+
+  spec.length = byte_count;
+  SRC_TYPE(spec) = 0;
+  SRC_HANDLE(spec) = 0;
+  SRC_PTR(spec)    = buffer_address;
+  DST_TYPE(spec) = 1;
+  DST_HANDLE(spec) = info->handle.ems_handle;
+  DST_PAGE(spec)   = (unsigned short) (file_offset / EMSPAGESIZE);
+  DST_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE);
+  
+  ctx.ds_si = (void far *) & spec;
+  ctx.ax = 0x5700;		/* move memory region */
+  jems_calldriver((EMScontext far *) & ctx);
+  if (HIBYTE(ctx.ax) != 0)
+    ERREXIT(cinfo, JERR_EMS_WRITE);
+}
+
+
+METHODDEF(void)
+close_ems_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  EMScontext ctx;
+
+  ctx.ax = 0x4500;
+  ctx.dx = info->handle.ems_handle;
+  jems_calldriver((EMScontext far *) & ctx);
+  TRACEMS1(cinfo, 1, JTRC_EMS_CLOSE, info->handle.ems_handle);
+  /* we ignore any error return from the driver */
+}
+
+
+LOCAL(boolean)
+open_ems_store (j_common_ptr cinfo, backing_store_ptr info,
+		long total_bytes_needed)
+{
+  EMScontext ctx;
+
+  /* Is EMS driver there? */
+  if (! jems_available())
+    return FALSE;
+
+  /* Get status, make sure EMS is OK */
+  ctx.ax = 0x4000;
+  jems_calldriver((EMScontext far *) & ctx);
+  if (HIBYTE(ctx.ax) != 0)
+    return FALSE;
+
+  /* Get version, must be >= 4.0 */
+  ctx.ax = 0x4600;
+  jems_calldriver((EMScontext far *) & ctx);
+  if (HIBYTE(ctx.ax) != 0 || LOBYTE(ctx.ax) < 0x40)
+    return FALSE;
+
+  /* Try to allocate requested space */
+  ctx.ax = 0x4300;
+  ctx.bx = (unsigned short) ((total_bytes_needed + EMSPAGESIZE-1L) / EMSPAGESIZE);
+  jems_calldriver((EMScontext far *) & ctx);
+  if (HIBYTE(ctx.ax) != 0)
+    return FALSE;
+
+  /* Succeeded, save the handle and away we go */
+  info->handle.ems_handle = ctx.dx;
+  info->read_backing_store = read_ems_store;
+  info->write_backing_store = write_ems_store;
+  info->close_backing_store = close_ems_store;
+  TRACEMS1(cinfo, 1, JTRC_EMS_OPEN, ctx.dx);
+  return TRUE;			/* succeeded */
+}
+
+#endif /* EMS_SUPPORTED */
+
+
+/*
+ * Initial opening of a backing-store object.
+ */
+
+GLOBAL(void)
+jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+			 long total_bytes_needed)
+{
+  /* Try extended memory, then expanded memory, then regular file. */
+#if XMS_SUPPORTED
+  if (open_xms_store(cinfo, info, total_bytes_needed))
+    return;
+#endif
+#if EMS_SUPPORTED
+  if (open_ems_store(cinfo, info, total_bytes_needed))
+    return;
+#endif
+  if (open_file_store(cinfo, info, total_bytes_needed))
+    return;
+  ERREXITS(cinfo, JERR_TFILE_CREATE, "");
+}
+
+
+/*
+ * These routines take care of any system-dependent initialization and
+ * cleanup required.
+ */
+
+GLOBAL(long)
+jpeg_mem_init (j_common_ptr cinfo)
+{
+  next_file_num = 0;		/* initialize temp file name generator */
+  return DEFAULT_MAX_MEM;	/* default for max_memory_to_use */
+}
+
+GLOBAL(void)
+jpeg_mem_term (j_common_ptr cinfo)
+{
+  /* Microsoft C, at least in v6.00A, will not successfully reclaim freed
+   * blocks of size > 32Kbytes unless we give it a kick in the rear, like so:
+   */
+#ifdef NEED_FHEAPMIN
+  _fheapmin();
+#endif
+}
diff --git a/jpeg-8d/jmemdosa.asm b/jpeg-8d/jmemdosa.asm
new file mode 100644
index 0000000..ecd4372
--- /dev/null
+++ b/jpeg-8d/jmemdosa.asm
@@ -0,0 +1,379 @@
+;
+; jmemdosa.asm
+;
+; Copyright (C) 1992, Thomas G. Lane.
+; This file is part of the Independent JPEG Group's software.
+; For conditions of distribution and use, see the accompanying README file.
+;
+; This file contains low-level interface routines to support the MS-DOS
+; backing store manager (jmemdos.c).  Routines are provided to access disk
+; files through direct DOS calls, and to access XMS and EMS drivers.
+;
+; This file should assemble with Microsoft's MASM or any compatible
+; assembler (including Borland's Turbo Assembler).  If you haven't got
+; a compatible assembler, better fall back to jmemansi.c or jmemname.c.
+;
+; To minimize dependence on the C compiler's register usage conventions,
+; we save and restore all 8086 registers, even though most compilers only
+; require SI,DI,DS to be preserved.  Also, we use only 16-bit-wide return
+; values, which everybody returns in AX.
+;
+; Based on code contributed by Ge' Weijers.
+;
+
+JMEMDOSA_TXT	segment byte public 'CODE'
+
+		assume	cs:JMEMDOSA_TXT
+
+		public	_jdos_open
+		public	_jdos_close
+		public	_jdos_seek
+		public	_jdos_read
+		public	_jdos_write
+		public	_jxms_getdriver
+		public	_jxms_calldriver
+		public	_jems_available
+		public	_jems_calldriver
+
+;
+; short far jdos_open (short far * handle, char far * filename)
+;
+; Create and open a temporary file
+;
+_jdos_open	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	cx,0			; normal file attributes
+		lds	dx,dword ptr [bp+10]	; get filename pointer
+		mov	ah,3ch			; create file
+		int	21h
+		jc	open_err		; if failed, return error code
+		lds	bx,dword ptr [bp+6]	; get handle pointer
+		mov	word ptr [bx],ax	; save the handle
+		xor	ax,ax			; return zero for OK
+open_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_open	endp
+
+
+;
+; short far jdos_close (short handle)
+;
+; Close the file handle
+;
+_jdos_close	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	bx,word ptr [bp+6]	; file handle
+		mov	ah,3eh			; close file
+		int	21h
+		jc	close_err		; if failed, return error code
+		xor	ax,ax			; return zero for OK
+close_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_close	endp
+
+
+;
+; short far jdos_seek (short handle, long offset)
+;
+; Set file position
+;
+_jdos_seek	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	bx,word ptr [bp+6]	; file handle
+		mov	dx,word ptr [bp+8]	; LS offset
+		mov	cx,word ptr [bp+10]	; MS offset
+		mov	ax,4200h		; absolute seek
+		int	21h
+		jc	seek_err		; if failed, return error code
+		xor	ax,ax			; return zero for OK
+seek_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_seek	endp
+
+
+;
+; short far jdos_read (short handle, void far * buffer, unsigned short count)
+;
+; Read from file
+;
+_jdos_read	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	bx,word ptr [bp+6]	; file handle
+		lds	dx,dword ptr [bp+8]	; buffer address
+		mov	cx,word ptr [bp+12]	; number of bytes
+		mov	ah,3fh			; read file
+		int	21h
+		jc	read_err		; if failed, return error code
+		cmp	ax,word ptr [bp+12]	; make sure all bytes were read
+		je	read_ok
+		mov	ax,1			; else return 1 for not OK
+		jmp	short read_err
+read_ok:	xor	ax,ax			; return zero for OK
+read_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_read	endp
+
+
+;
+; short far jdos_write (short handle, void far * buffer, unsigned short count)
+;
+; Write to file
+;
+_jdos_write	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	bx,word ptr [bp+6]	; file handle
+		lds	dx,dword ptr [bp+8]	; buffer address
+		mov	cx,word ptr [bp+12]	; number of bytes
+		mov	ah,40h			; write file
+		int	21h
+		jc	write_err		; if failed, return error code
+		cmp	ax,word ptr [bp+12]	; make sure all bytes written
+		je	write_ok
+		mov	ax,1			; else return 1 for not OK
+		jmp	short write_err
+write_ok:	xor	ax,ax			; return zero for OK
+write_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_write	endp
+
+
+;
+; void far jxms_getdriver (XMSDRIVER far *)
+;
+; Get the address of the XMS driver, or NULL if not available
+;
+_jxms_getdriver	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov 	ax,4300h		; call multiplex interrupt with
+		int	2fh			; a magic cookie, hex 4300
+		cmp 	al,80h			; AL should contain hex 80
+		je	xmsavail
+		xor 	dx,dx			; no XMS driver available
+		xor 	ax,ax			; return a nil pointer
+		jmp	short xmsavail_done
+xmsavail:	mov 	ax,4310h		; fetch driver address with
+		int	2fh			; another magic cookie
+		mov 	dx,es			; copy address to dx:ax
+		mov 	ax,bx
+xmsavail_done:	les 	bx,dword ptr [bp+6]	; get pointer to return value
+		mov	word ptr es:[bx],ax
+		mov	word ptr es:[bx+2],dx
+		pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop	bp
+		ret
+_jxms_getdriver	endp
+
+
+;
+; void far jxms_calldriver (XMSDRIVER, XMScontext far *)
+;
+; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers.
+; These are loaded, the XMS call is performed, and the new values of the
+; AX,DX,BX registers are written back to the context structure.
+;
+_jxms_calldriver 	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		les 	bx,dword ptr [bp+10]	; get XMScontext pointer
+		mov 	ax,word ptr es:[bx]	; load registers
+		mov 	dx,word ptr es:[bx+2]
+		mov 	si,word ptr es:[bx+6]
+		mov 	ds,word ptr es:[bx+8]
+		mov 	bx,word ptr es:[bx+4]
+		call	dword ptr [bp+6]	; call the driver
+		mov	cx,bx			; save returned BX for a sec
+		les 	bx,dword ptr [bp+10]	; get XMScontext pointer
+		mov 	word ptr es:[bx],ax	; put back ax,dx,bx
+		mov 	word ptr es:[bx+2],dx
+		mov 	word ptr es:[bx+4],cx
+		pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jxms_calldriver 	endp
+
+
+;
+; short far jems_available (void)
+;
+; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs)
+;
+_jems_available	proc	far
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	ax,3567h		; get interrupt vector 67h
+		int	21h
+		push	cs
+		pop	ds
+		mov	di,000ah		; check offs 10 in returned seg
+		lea	si,ASCII_device_name	; against literal string
+		mov	cx,8
+		cld
+		repe cmpsb
+		jne	no_ems
+		mov	ax,1			; match, it's there
+		jmp	short avail_done
+no_ems:		xor	ax,ax			; it's not there
+avail_done:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		ret
+
+ASCII_device_name	db	"EMMXXXX0"
+
+_jems_available	endp
+
+
+;
+; void far jems_calldriver (EMScontext far *)
+;
+; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers.
+; These are loaded, the EMS trap is performed, and the new values of the
+; AX,DX,BX registers are written back to the context structure.
+;
+_jems_calldriver	proc far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		les 	bx,dword ptr [bp+6]	; get EMScontext pointer
+		mov 	ax,word ptr es:[bx]	; load registers
+		mov 	dx,word ptr es:[bx+2]
+		mov 	si,word ptr es:[bx+6]
+		mov 	ds,word ptr es:[bx+8]
+		mov 	bx,word ptr es:[bx+4]
+		int	67h			; call the EMS driver
+		mov	cx,bx			; save returned BX for a sec
+		les 	bx,dword ptr [bp+6]	; get EMScontext pointer
+		mov 	word ptr es:[bx],ax	; put back ax,dx,bx
+		mov 	word ptr es:[bx+2],dx
+		mov 	word ptr es:[bx+4],cx
+		pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jems_calldriver	endp
+
+JMEMDOSA_TXT	ends
+
+		end
diff --git a/jpeg-8d/jmemmac.c b/jpeg-8d/jmemmac.c
new file mode 100644
index 0000000..106f9be
--- /dev/null
+++ b/jpeg-8d/jmemmac.c
@@ -0,0 +1,289 @@
+/*
+ * jmemmac.c
+ *
+ * Copyright (C) 1992-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * jmemmac.c provides an Apple Macintosh implementation of the system-
+ * dependent portion of the JPEG memory manager.
+ *
+ * If you use jmemmac.c, then you must define USE_MAC_MEMMGR in the
+ * JPEG_INTERNALS part of jconfig.h.
+ *
+ * jmemmac.c uses the Macintosh toolbox routines NewPtr and DisposePtr
+ * instead of malloc and free.  It accurately determines the amount of
+ * memory available by using CompactMem.  Notice that if left to its
+ * own devices, this code can chew up all available space in the
+ * application's zone, with the exception of the rather small "slop"
+ * factor computed in jpeg_mem_available().  The application can ensure
+ * that more space is left over by reducing max_memory_to_use.
+ *
+ * Large images are swapped to disk using temporary files and System 7.0+'s
+ * temporary folder functionality.
+ *
+ * Note that jmemmac.c depends on two features of MacOS that were first
+ * introduced in System 7: FindFolder and the FSSpec-based calls.
+ * If your application uses jmemmac.c and is run under System 6 or earlier,
+ * and the jpeg library decides it needs a temporary file, it will abort,
+ * printing error messages about requiring System 7.  (If no temporary files
+ * are created, it will run fine.)
+ *
+ * If you want to use jmemmac.c in an application that might be used with
+ * System 6 or earlier, then you should remove dependencies on FindFolder
+ * and the FSSpec calls.  You will need to replace FindFolder with some
+ * other mechanism for finding a place to put temporary files, and you
+ * should replace the FSSpec calls with their HFS equivalents:
+ *
+ *     FSpDelete     ->  HDelete
+ *     FSpGetFInfo   ->  HGetFInfo
+ *     FSpCreate     ->  HCreate
+ *     FSpOpenDF     ->  HOpen      *** Note: not HOpenDF ***
+ *     FSMakeFSSpec  ->  (fill in spec by hand.)
+ *
+ * (Use HOpen instead of HOpenDF.  HOpen is just a glue-interface to PBHOpen,
+ * which is on all HFS macs.  HOpenDF is a System 7 addition which avoids the
+ * ages-old problem of names starting with a period.)
+ *
+ * Contributed by Sam Bushell (jsam@iagu.on.net) and
+ * Dan Gildor (gyld@in-touch.com).
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jmemsys.h"    /* import the system-dependent declarations */
+
+#ifndef USE_MAC_MEMMGR	/* make sure user got configuration right */
+  You forgot to define USE_MAC_MEMMGR in jconfig.h. /* deliberate syntax error */
+#endif
+
+#include <Memory.h>     /* we use the MacOS memory manager */
+#include <Files.h>      /* we use the MacOS File stuff */
+#include <Folders.h>    /* we use the MacOS HFS stuff */
+#include <Script.h>     /* for smSystemScript */
+#include <Gestalt.h>    /* we use Gestalt to test for specific functionality */
+
+#ifndef TEMP_FILE_NAME		/* can override from jconfig.h or Makefile */
+#define TEMP_FILE_NAME  "JPG%03d.TMP"
+#endif
+
+static int next_file_num;	/* to distinguish among several temp files */
+
+
+/*
+ * Memory allocation and freeing are controlled by the MacOS library
+ * routines NewPtr() and DisposePtr(), which allocate fixed-address
+ * storage.  Unfortunately, the IJG library isn't smart enough to cope
+ * with relocatable storage.
+ */
+
+GLOBAL(void *)
+jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void *) NewPtr(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
+{
+  DisposePtr((Ptr) object);
+}
+
+
+/*
+ * "Large" objects are treated the same as "small" ones.
+ * NB: we include FAR keywords in the routine declarations simply for
+ * consistency with the rest of the IJG code; FAR should expand to empty
+ * on rational architectures like the Mac.
+ */
+
+GLOBAL(void FAR *)
+jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void FAR *) NewPtr(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
+{
+  DisposePtr((Ptr) object);
+}
+
+
+/*
+ * This routine computes the total memory space available for allocation.
+ */
+
+GLOBAL(long)
+jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
+		    long max_bytes_needed, long already_allocated)
+{
+  long limit = cinfo->mem->max_memory_to_use - already_allocated;
+  long slop, mem;
+
+  /* Don't ask for more than what application has told us we may use */
+  if (max_bytes_needed > limit && limit > 0)
+    max_bytes_needed = limit;
+  /* Find whether there's a big enough free block in the heap.
+   * CompactMem tries to create a contiguous block of the requested size,
+   * and then returns the size of the largest free block (which could be
+   * much more or much less than we asked for).
+   * We add some slop to ensure we don't use up all available memory.
+   */
+  slop = max_bytes_needed / 16 + 32768L;
+  mem = CompactMem(max_bytes_needed + slop) - slop;
+  if (mem < 0)
+    mem = 0;			/* sigh, couldn't even get the slop */
+  /* Don't take more than the application says we can have */
+  if (mem > limit && limit > 0)
+    mem = limit;
+  return mem;
+}
+
+
+/*
+ * Backing store (temporary file) management.
+ * Backing store objects are only used when the value returned by
+ * jpeg_mem_available is less than the total space needed.  You can dispense
+ * with these routines if you have plenty of virtual memory; see jmemnobs.c.
+ */
+
+
+METHODDEF(void)
+read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		    void FAR * buffer_address,
+		    long file_offset, long byte_count)
+{
+  long bytes = byte_count;
+  long retVal;
+
+  if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr )
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+
+  retVal = FSRead ( info->temp_file, &bytes,
+		    (unsigned char *) buffer_address );
+  if ( retVal != noErr || bytes != byte_count )
+    ERREXIT(cinfo, JERR_TFILE_READ);
+}
+
+
+METHODDEF(void)
+write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		     void FAR * buffer_address,
+		     long file_offset, long byte_count)
+{
+  long bytes = byte_count;
+  long retVal;
+
+  if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr )
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+
+  retVal = FSWrite ( info->temp_file, &bytes,
+		     (unsigned char *) buffer_address );
+  if ( retVal != noErr || bytes != byte_count )
+    ERREXIT(cinfo, JERR_TFILE_WRITE);
+}
+
+
+METHODDEF(void)
+close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  FSClose ( info->temp_file );
+  FSpDelete ( &(info->tempSpec) );
+}
+
+
+/*
+ * Initial opening of a backing-store object.
+ *
+ * This version uses FindFolder to find the Temporary Items folder,
+ * and puts the temporary file in there.
+ */
+
+GLOBAL(void)
+jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+			 long total_bytes_needed)
+{
+  short         tmpRef, vRefNum;
+  long          dirID;
+  FInfo         finderInfo;
+  FSSpec        theSpec;
+  Str255        fName;
+  OSErr         osErr;
+  long          gestaltResponse = 0;
+
+  /* Check that FSSpec calls are available. */
+  osErr = Gestalt( gestaltFSAttr, &gestaltResponse );
+  if ( ( osErr != noErr )
+       || !( gestaltResponse & (1<<gestaltHasFSSpecCalls) ) )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "- System 7.0 or later required");
+  /* TO DO: add a proper error message to jerror.h. */
+
+  /* Check that FindFolder is available. */
+  osErr = Gestalt( gestaltFindFolderAttr, &gestaltResponse );
+  if ( ( osErr != noErr )
+       || !( gestaltResponse & (1<<gestaltFindFolderPresent) ) )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "- System 7.0 or later required.");
+  /* TO DO: add a proper error message to jerror.h. */
+
+  osErr = FindFolder ( kOnSystemDisk, kTemporaryFolderType, kCreateFolder,
+                       &vRefNum, &dirID );
+  if ( osErr != noErr )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "- temporary items folder unavailable");
+  /* TO DO: Try putting the temp files somewhere else. */
+
+  /* Keep generating file names till we find one that's not in use */
+  for (;;) {
+    next_file_num++;		/* advance counter */
+
+    sprintf(info->temp_name, TEMP_FILE_NAME, next_file_num);
+    strcpy ( (Ptr)fName+1, info->temp_name );
+    *fName = strlen (info->temp_name);
+    osErr = FSMakeFSSpec ( vRefNum, dirID, fName, &theSpec );
+
+    if ( (osErr = FSpGetFInfo ( &theSpec, &finderInfo ) ) != noErr )
+      break;
+  }
+
+  osErr = FSpCreate ( &theSpec, '????', '????', smSystemScript );
+  if ( osErr != noErr )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
+
+  osErr = FSpOpenDF ( &theSpec, fsRdWrPerm, &(info->temp_file) );
+  if ( osErr != noErr )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
+
+  info->tempSpec = theSpec;
+
+  info->read_backing_store = read_backing_store;
+  info->write_backing_store = write_backing_store;
+  info->close_backing_store = close_backing_store;
+  TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
+}
+
+
+/*
+ * These routines take care of any system-dependent initialization and
+ * cleanup required.
+ */
+
+GLOBAL(long)
+jpeg_mem_init (j_common_ptr cinfo)
+{
+  next_file_num = 0;
+
+  /* max_memory_to_use will be initialized to FreeMem()'s result;
+   * the calling application might later reduce it, for example
+   * to leave room to invoke multiple JPEG objects.
+   * Note that FreeMem returns the total number of free bytes;
+   * it may not be possible to allocate a single block of this size.
+   */
+  return FreeMem();
+}
+
+GLOBAL(void)
+jpeg_mem_term (j_common_ptr cinfo)
+{
+  /* no work */
+}
diff --git a/jpeg-8d/jmemmgr.c b/jpeg-8d/jmemmgr.c
new file mode 100644
index 0000000..f0e83fb
--- /dev/null
+++ b/jpeg-8d/jmemmgr.c
@@ -0,0 +1,1119 @@
+/*
+ * jmemmgr.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains the JPEG system-independent memory management
+ * routines.  This code is usable across a wide variety of machines; most
+ * of the system dependencies have been isolated in a separate file.
+ * The major functions provided here are:
+ *   * pool-based allocation and freeing of memory;
+ *   * policy decisions about how to divide available memory among the
+ *     virtual arrays;
+ *   * control logic for swapping virtual arrays between main memory and
+ *     backing storage.
+ * The separate system-dependent file provides the actual backing-storage
+ * access code, and it contains the policy decision about how much total
+ * main memory to use.
+ * This file is system-dependent in the sense that some of its functions
+ * are unnecessary in some systems.  For example, if there is enough virtual
+ * memory so that backing storage will never be used, much of the virtual
+ * array control logic could be removed.  (Of course, if you have that much
+ * memory then you shouldn't care about a little bit of unused code...)
+ */
+
+#define JPEG_INTERNALS
+#define AM_MEMORY_MANAGER	/* we define jvirt_Xarray_control structs */
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jmemsys.h"		/* import the system-dependent declarations */
+
+#ifndef NO_GETENV
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare getenv() */
+extern char * getenv JPP((const char * name));
+#endif
+#endif
+
+
+/*
+ * Some important notes:
+ *   The allocation routines provided here must never return NULL.
+ *   They should exit to error_exit if unsuccessful.
+ *
+ *   It's not a good idea to try to merge the sarray and barray routines,
+ *   even though they are textually almost the same, because samples are
+ *   usually stored as bytes while coefficients are shorts or ints.  Thus,
+ *   in machines where byte pointers have a different representation from
+ *   word pointers, the resulting machine code could not be the same.
+ */
+
+
+/*
+ * Many machines require storage alignment: longs must start on 4-byte
+ * boundaries, doubles on 8-byte boundaries, etc.  On such machines, malloc()
+ * always returns pointers that are multiples of the worst-case alignment
+ * requirement, and we had better do so too.
+ * There isn't any really portable way to determine the worst-case alignment
+ * requirement.  This module assumes that the alignment requirement is
+ * multiples of sizeof(ALIGN_TYPE).
+ * By default, we define ALIGN_TYPE as double.  This is necessary on some
+ * workstations (where doubles really do need 8-byte alignment) and will work
+ * fine on nearly everything.  If your machine has lesser alignment needs,
+ * you can save a few bytes by making ALIGN_TYPE smaller.
+ * The only place I know of where this will NOT work is certain Macintosh
+ * 680x0 compilers that define double as a 10-byte IEEE extended float.
+ * Doing 10-byte alignment is counterproductive because longwords won't be
+ * aligned well.  Put "#define ALIGN_TYPE long" in jconfig.h if you have
+ * such a compiler.
+ */
+
+#ifndef ALIGN_TYPE		/* so can override from jconfig.h */
+#define ALIGN_TYPE  double
+#endif
+
+
+/*
+ * We allocate objects from "pools", where each pool is gotten with a single
+ * request to jpeg_get_small() or jpeg_get_large().  There is no per-object
+ * overhead within a pool, except for alignment padding.  Each pool has a
+ * header with a link to the next pool of the same class.
+ * Small and large pool headers are identical except that the latter's
+ * link pointer must be FAR on 80x86 machines.
+ * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE
+ * field.  This forces the compiler to make SIZEOF(small_pool_hdr) a multiple
+ * of the alignment requirement of ALIGN_TYPE.
+ */
+
+typedef union small_pool_struct * small_pool_ptr;
+
+typedef union small_pool_struct {
+  struct {
+    small_pool_ptr next;	/* next in list of pools */
+    size_t bytes_used;		/* how many bytes already used within pool */
+    size_t bytes_left;		/* bytes still available in this pool */
+  } hdr;
+  ALIGN_TYPE dummy;		/* included in union to ensure alignment */
+} small_pool_hdr;
+
+typedef union large_pool_struct FAR * large_pool_ptr;
+
+typedef union large_pool_struct {
+  struct {
+    large_pool_ptr next;	/* next in list of pools */
+    size_t bytes_used;		/* how many bytes already used within pool */
+    size_t bytes_left;		/* bytes still available in this pool */
+  } hdr;
+  ALIGN_TYPE dummy;		/* included in union to ensure alignment */
+} large_pool_hdr;
+
+
+/*
+ * Here is the full definition of a memory manager object.
+ */
+
+typedef struct {
+  struct jpeg_memory_mgr pub;	/* public fields */
+
+  /* Each pool identifier (lifetime class) names a linked list of pools. */
+  small_pool_ptr small_list[JPOOL_NUMPOOLS];
+  large_pool_ptr large_list[JPOOL_NUMPOOLS];
+
+  /* Since we only have one lifetime class of virtual arrays, only one
+   * linked list is necessary (for each datatype).  Note that the virtual
+   * array control blocks being linked together are actually stored somewhere
+   * in the small-pool list.
+   */
+  jvirt_sarray_ptr virt_sarray_list;
+  jvirt_barray_ptr virt_barray_list;
+
+  /* This counts total space obtained from jpeg_get_small/large */
+  long total_space_allocated;
+
+  /* alloc_sarray and alloc_barray set this value for use by virtual
+   * array routines.
+   */
+  JDIMENSION last_rowsperchunk;	/* from most recent alloc_sarray/barray */
+} my_memory_mgr;
+
+typedef my_memory_mgr * my_mem_ptr;
+
+
+/*
+ * The control blocks for virtual arrays.
+ * Note that these blocks are allocated in the "small" pool area.
+ * System-dependent info for the associated backing store (if any) is hidden
+ * inside the backing_store_info struct.
+ */
+
+struct jvirt_sarray_control {
+  JSAMPARRAY mem_buffer;	/* => the in-memory buffer */
+  JDIMENSION rows_in_array;	/* total virtual array height */
+  JDIMENSION samplesperrow;	/* width of array (and of memory buffer) */
+  JDIMENSION maxaccess;		/* max rows accessed by access_virt_sarray */
+  JDIMENSION rows_in_mem;	/* height of memory buffer */
+  JDIMENSION rowsperchunk;	/* allocation chunk size in mem_buffer */
+  JDIMENSION cur_start_row;	/* first logical row # in the buffer */
+  JDIMENSION first_undef_row;	/* row # of first uninitialized row */
+  boolean pre_zero;		/* pre-zero mode requested? */
+  boolean dirty;		/* do current buffer contents need written? */
+  boolean b_s_open;		/* is backing-store data valid? */
+  jvirt_sarray_ptr next;	/* link to next virtual sarray control block */
+  backing_store_info b_s_info;	/* System-dependent control info */
+};
+
+struct jvirt_barray_control {
+  JBLOCKARRAY mem_buffer;	/* => the in-memory buffer */
+  JDIMENSION rows_in_array;	/* total virtual array height */
+  JDIMENSION blocksperrow;	/* width of array (and of memory buffer) */
+  JDIMENSION maxaccess;		/* max rows accessed by access_virt_barray */
+  JDIMENSION rows_in_mem;	/* height of memory buffer */
+  JDIMENSION rowsperchunk;	/* allocation chunk size in mem_buffer */
+  JDIMENSION cur_start_row;	/* first logical row # in the buffer */
+  JDIMENSION first_undef_row;	/* row # of first uninitialized row */
+  boolean pre_zero;		/* pre-zero mode requested? */
+  boolean dirty;		/* do current buffer contents need written? */
+  boolean b_s_open;		/* is backing-store data valid? */
+  jvirt_barray_ptr next;	/* link to next virtual barray control block */
+  backing_store_info b_s_info;	/* System-dependent control info */
+};
+
+
+#ifdef MEM_STATS		/* optional extra stuff for statistics */
+
+LOCAL(void)
+print_mem_stats (j_common_ptr cinfo, int pool_id)
+{
+  my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
+  small_pool_ptr shdr_ptr;
+  large_pool_ptr lhdr_ptr;
+
+  /* Since this is only a debugging stub, we can cheat a little by using
+   * fprintf directly rather than going through the trace message code.
+   * This is helpful because message parm array can't handle longs.
+   */
+  fprintf(stderr, "Freeing pool %d, total space = %ld\n",
+	  pool_id, mem->total_space_allocated);
+
+  for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL;
+       lhdr_ptr = lhdr_ptr->hdr.next) {
+    fprintf(stderr, "  Large chunk used %ld\n",
+	    (long) lhdr_ptr->hdr.bytes_used);
+  }
+
+  for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL;
+       shdr_ptr = shdr_ptr->hdr.next) {
+    fprintf(stderr, "  Small chunk used %ld free %ld\n",
+	    (long) shdr_ptr->hdr.bytes_used,
+	    (long) shdr_ptr->hdr.bytes_left);
+  }
+}
+
+#endif /* MEM_STATS */
+
+
+LOCAL(void)
+out_of_memory (j_common_ptr cinfo, int which)
+/* Report an out-of-memory error and stop execution */
+/* If we compiled MEM_STATS support, report alloc requests before dying */
+{
+#ifdef MEM_STATS
+  cinfo->err->trace_level = 2;	/* force self_destruct to report stats */
+#endif
+  ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, which);
+}
+
+
+/*
+ * Allocation of "small" objects.
+ *
+ * For these, we use pooled storage.  When a new pool must be created,
+ * we try to get enough space for the current request plus a "slop" factor,
+ * where the slop will be the amount of leftover space in the new pool.
+ * The speed vs. space tradeoff is largely determined by the slop values.
+ * A different slop value is provided for each pool class (lifetime),
+ * and we also distinguish the first pool of a class from later ones.
+ * NOTE: the values given work fairly well on both 16- and 32-bit-int
+ * machines, but may be too small if longs are 64 bits or more.
+ */
+
+static const size_t first_pool_slop[JPOOL_NUMPOOLS] = 
+{
+	1600,			/* first PERMANENT pool */
+	16000			/* first IMAGE pool */
+};
+
+static const size_t extra_pool_slop[JPOOL_NUMPOOLS] = 
+{
+	0,			/* additional PERMANENT pools */
+	5000			/* additional IMAGE pools */
+};
+
+#define MIN_SLOP  50		/* greater than 0 to avoid futile looping */
+
+
+METHODDEF(void *)
+alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
+/* Allocate a "small" object */
+{
+  my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
+  small_pool_ptr hdr_ptr, prev_hdr_ptr;
+  char * data_ptr;
+  size_t odd_bytes, min_request, slop;
+
+  /* Check for unsatisfiable request (do now to ensure no overflow below) */
+  if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr)))
+    out_of_memory(cinfo, 1);	/* request exceeds malloc's ability */
+
+  /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */
+  odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE);
+  if (odd_bytes > 0)
+    sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes;
+
+  /* See if space is available in any existing pool */
+  if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS)
+    ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id);	/* safety check */
+  prev_hdr_ptr = NULL;
+  hdr_ptr = mem->small_list[pool_id];
+  while (hdr_ptr != NULL) {
+    if (hdr_ptr->hdr.bytes_left >= sizeofobject)
+      break;			/* found pool with enough space */
+    prev_hdr_ptr = hdr_ptr;
+    hdr_ptr = hdr_ptr->hdr.next;
+  }
+
+  /* Time to make a new pool? */
+  if (hdr_ptr == NULL) {
+    /* min_request is what we need now, slop is what will be leftover */
+    min_request = sizeofobject + SIZEOF(small_pool_hdr);
+    if (prev_hdr_ptr == NULL)	/* first pool in class? */
+      slop = first_pool_slop[pool_id];
+    else
+      slop = extra_pool_slop[pool_id];
+    /* Don't ask for more than MAX_ALLOC_CHUNK */
+    if (slop > (size_t) (MAX_ALLOC_CHUNK-min_request))
+      slop = (size_t) (MAX_ALLOC_CHUNK-min_request);
+    /* Try to get space, if fail reduce slop and try again */
+    for (;;) {
+      hdr_ptr = (small_pool_ptr) jpeg_get_small(cinfo, min_request + slop);
+      if (hdr_ptr != NULL)
+	break;
+      slop /= 2;
+      if (slop < MIN_SLOP)	/* give up when it gets real small */
+	out_of_memory(cinfo, 2); /* jpeg_get_small failed */
+    }
+    mem->total_space_allocated += min_request + slop;
+    /* Success, initialize the new pool header and add to end of list */
+    hdr_ptr->hdr.next = NULL;
+    hdr_ptr->hdr.bytes_used = 0;
+    hdr_ptr->hdr.bytes_left = sizeofobject + slop;
+    if (prev_hdr_ptr == NULL)	/* first pool in class? */
+      mem->small_list[pool_id] = hdr_ptr;
+    else
+      prev_hdr_ptr->hdr.next = hdr_ptr;
+  }
+
+  /* OK, allocate the object from the current pool */
+  data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */
+  data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */
+  hdr_ptr->hdr.bytes_used += sizeofobject;
+  hdr_ptr->hdr.bytes_left -= sizeofobject;
+
+  return (void *) data_ptr;
+}
+
+
+/*
+ * Allocation of "large" objects.
+ *
+ * The external semantics of these are the same as "small" objects,
+ * except that FAR pointers are used on 80x86.  However the pool
+ * management heuristics are quite different.  We assume that each
+ * request is large enough that it may as well be passed directly to
+ * jpeg_get_large; the pool management just links everything together
+ * so that we can free it all on demand.
+ * Note: the major use of "large" objects is in JSAMPARRAY and JBLOCKARRAY
+ * structures.  The routines that create these structures (see below)
+ * deliberately bunch rows together to ensure a large request size.
+ */
+
+METHODDEF(void FAR *)
+alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
+/* Allocate a "large" object */
+{
+  my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
+  large_pool_ptr hdr_ptr;
+  size_t odd_bytes;
+
+  /* Check for unsatisfiable request (do now to ensure no overflow below) */
+  if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)))
+    out_of_memory(cinfo, 3);	/* request exceeds malloc's ability */
+
+  /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */
+  odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE);
+  if (odd_bytes > 0)
+    sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes;
+
+  /* Always make a new pool */
+  if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS)
+    ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id);	/* safety check */
+
+  hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject +
+					    SIZEOF(large_pool_hdr));
+  if (hdr_ptr == NULL)
+    out_of_memory(cinfo, 4);	/* jpeg_get_large failed */
+  mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr);
+
+  /* Success, initialize the new pool header and add to list */
+  hdr_ptr->hdr.next = mem->large_list[pool_id];
+  /* We maintain space counts in each pool header for statistical purposes,
+   * even though they are not needed for allocation.
+   */
+  hdr_ptr->hdr.bytes_used = sizeofobject;
+  hdr_ptr->hdr.bytes_left = 0;
+  mem->large_list[pool_id] = hdr_ptr;
+
+  return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */
+}
+
+
+/*
+ * Creation of 2-D sample arrays.
+ * The pointers are in near heap, the samples themselves in FAR heap.
+ *
+ * To minimize allocation overhead and to allow I/O of large contiguous
+ * blocks, we allocate the sample rows in groups of as many rows as possible
+ * without exceeding MAX_ALLOC_CHUNK total bytes per allocation request.
+ * NB: the virtual array control routines, later in this file, know about
+ * this chunking of rows.  The rowsperchunk value is left in the mem manager
+ * object so that it can be saved away if this sarray is the workspace for
+ * a virtual array.
+ */
+
+METHODDEF(JSAMPARRAY)
+alloc_sarray (j_common_ptr cinfo, int pool_id,
+	      JDIMENSION samplesperrow, JDIMENSION numrows)
+/* Allocate a 2-D sample array */
+{
+  my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
+  JSAMPARRAY result;
+  JSAMPROW workspace;
+  JDIMENSION rowsperchunk, currow, i;
+  long ltemp;
+
+  /* Calculate max # of rows allowed in one allocation chunk */
+  ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) /
+	  ((long) samplesperrow * SIZEOF(JSAMPLE));
+  if (ltemp <= 0)
+    ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
+  if (ltemp < (long) numrows)
+    rowsperchunk = (JDIMENSION) ltemp;
+  else
+    rowsperchunk = numrows;
+  mem->last_rowsperchunk = rowsperchunk;
+
+  /* Get space for row pointers (small object) */
+  result = (JSAMPARRAY) alloc_small(cinfo, pool_id,
+				    (size_t) (numrows * SIZEOF(JSAMPROW)));
+
+  /* Get the rows themselves (large objects) */
+  currow = 0;
+  while (currow < numrows) {
+    rowsperchunk = MIN(rowsperchunk, numrows - currow);
+    workspace = (JSAMPROW) alloc_large(cinfo, pool_id,
+	(size_t) ((size_t) rowsperchunk * (size_t) samplesperrow
+		  * SIZEOF(JSAMPLE)));
+    for (i = rowsperchunk; i > 0; i--) {
+      result[currow++] = workspace;
+      workspace += samplesperrow;
+    }
+  }
+
+  return result;
+}
+
+
+/*
+ * Creation of 2-D coefficient-block arrays.
+ * This is essentially the same as the code for sample arrays, above.
+ */
+
+METHODDEF(JBLOCKARRAY)
+alloc_barray (j_common_ptr cinfo, int pool_id,
+	      JDIMENSION blocksperrow, JDIMENSION numrows)
+/* Allocate a 2-D coefficient-block array */
+{
+  my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
+  JBLOCKARRAY result;
+  JBLOCKROW workspace;
+  JDIMENSION rowsperchunk, currow, i;
+  long ltemp;
+
+  /* Calculate max # of rows allowed in one allocation chunk */
+  ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) /
+	  ((long) blocksperrow * SIZEOF(JBLOCK));
+  if (ltemp <= 0)
+    ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
+  if (ltemp < (long) numrows)
+    rowsperchunk = (JDIMENSION) ltemp;
+  else
+    rowsperchunk = numrows;
+  mem->last_rowsperchunk = rowsperchunk;
+
+  /* Get space for row pointers (small object) */
+  result = (JBLOCKARRAY) alloc_small(cinfo, pool_id,
+				     (size_t) (numrows * SIZEOF(JBLOCKROW)));
+
+  /* Get the rows themselves (large objects) */
+  currow = 0;
+  while (currow < numrows) {
+    rowsperchunk = MIN(rowsperchunk, numrows - currow);
+    workspace = (JBLOCKROW) alloc_large(cinfo, pool_id,
+	(size_t) ((size_t) rowsperchunk * (size_t) blocksperrow
+		  * SIZEOF(JBLOCK)));
+    for (i = rowsperchunk; i > 0; i--) {
+      result[currow++] = workspace;
+      workspace += blocksperrow;
+    }
+  }
+
+  return result;
+}
+
+
+/*
+ * About virtual array management:
+ *
+ * The above "normal" array routines are only used to allocate strip buffers
+ * (as wide as the image, but just a few rows high).  Full-image-sized buffers
+ * are handled as "virtual" arrays.  The array is still accessed a strip at a
+ * time, but the memory manager must save the whole array for repeated
+ * accesses.  The intended implementation is that there is a strip buffer in
+ * memory (as high as is possible given the desired memory limit), plus a
+ * backing file that holds the rest of the array.
+ *
+ * The request_virt_array routines are told the total size of the image and
+ * the maximum number of rows that will be accessed at once.  The in-memory
+ * buffer must be at least as large as the maxaccess value.
+ *
+ * The request routines create control blocks but not the in-memory buffers.
+ * That is postponed until realize_virt_arrays is called.  At that time the
+ * total amount of space needed is known (approximately, anyway), so free
+ * memory can be divided up fairly.
+ *
+ * The access_virt_array routines are responsible for making a specific strip
+ * area accessible (after reading or writing the backing file, if necessary).
+ * Note that the access routines are told whether the caller intends to modify
+ * the accessed strip; during a read-only pass this saves having to rewrite
+ * data to disk.  The access routines are also responsible for pre-zeroing
+ * any newly accessed rows, if pre-zeroing was requested.
+ *
+ * In current usage, the access requests are usually for nonoverlapping
+ * strips; that is, successive access start_row numbers differ by exactly
+ * num_rows = maxaccess.  This means we can get good performance with simple
+ * buffer dump/reload logic, by making the in-memory buffer be a multiple
+ * of the access height; then there will never be accesses across bufferload
+ * boundaries.  The code will still work with overlapping access requests,
+ * but it doesn't handle bufferload overlaps very efficiently.
+ */
+
+
+METHODDEF(jvirt_sarray_ptr)
+request_virt_sarray (j_common_ptr cinfo, int pool_id, boolean pre_zero,
+		     JDIMENSION samplesperrow, JDIMENSION numrows,
+		     JDIMENSION maxaccess)
+/* Request a virtual 2-D sample array */
+{
+  my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
+  jvirt_sarray_ptr result;
+
+  /* Only IMAGE-lifetime virtual arrays are currently supported */
+  if (pool_id != JPOOL_IMAGE)
+    ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id);	/* safety check */
+
+  /* get control block */
+  result = (jvirt_sarray_ptr) alloc_small(cinfo, pool_id,
+					  SIZEOF(struct jvirt_sarray_control));
+
+  result->mem_buffer = NULL;	/* marks array not yet realized */
+  result->rows_in_array = numrows;
+  result->samplesperrow = samplesperrow;
+  result->maxaccess = maxaccess;
+  result->pre_zero = pre_zero;
+  result->b_s_open = FALSE;	/* no associated backing-store object */
+  result->next = mem->virt_sarray_list; /* add to list of virtual arrays */
+  mem->virt_sarray_list = result;
+
+  return result;
+}
+
+
+METHODDEF(jvirt_barray_ptr)
+request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero,
+		     JDIMENSION blocksperrow, JDIMENSION numrows,
+		     JDIMENSION maxaccess)
+/* Request a virtual 2-D coefficient-block array */
+{
+  my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
+  jvirt_barray_ptr result;
+
+  /* Only IMAGE-lifetime virtual arrays are currently supported */
+  if (pool_id != JPOOL_IMAGE)
+    ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id);	/* safety check */
+
+  /* get control block */
+  result = (jvirt_barray_ptr) alloc_small(cinfo, pool_id,
+					  SIZEOF(struct jvirt_barray_control));
+
+  result->mem_buffer = NULL;	/* marks array not yet realized */
+  result->rows_in_array = numrows;
+  result->blocksperrow = blocksperrow;
+  result->maxaccess = maxaccess;
+  result->pre_zero = pre_zero;
+  result->b_s_open = FALSE;	/* no associated backing-store object */
+  result->next = mem->virt_barray_list; /* add to list of virtual arrays */
+  mem->virt_barray_list = result;
+
+  return result;
+}
+
+
+METHODDEF(void)
+realize_virt_arrays (j_common_ptr cinfo)
+/* Allocate the in-memory buffers for any unrealized virtual arrays */
+{
+  my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
+  long space_per_minheight, maximum_space, avail_mem;
+  long minheights, max_minheights;
+  jvirt_sarray_ptr sptr;
+  jvirt_barray_ptr bptr;
+
+  /* Compute the minimum space needed (maxaccess rows in each buffer)
+   * and the maximum space needed (full image height in each buffer).
+   * These may be of use to the system-dependent jpeg_mem_available routine.
+   */
+  space_per_minheight = 0;
+  maximum_space = 0;
+  for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) {
+    if (sptr->mem_buffer == NULL) { /* if not realized yet */
+      space_per_minheight += (long) sptr->maxaccess *
+			     (long) sptr->samplesperrow * SIZEOF(JSAMPLE);
+      maximum_space += (long) sptr->rows_in_array *
+		       (long) sptr->samplesperrow * SIZEOF(JSAMPLE);
+    }
+  }
+  for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) {
+    if (bptr->mem_buffer == NULL) { /* if not realized yet */
+      space_per_minheight += (long) bptr->maxaccess *
+			     (long) bptr->blocksperrow * SIZEOF(JBLOCK);
+      maximum_space += (long) bptr->rows_in_array *
+		       (long) bptr->blocksperrow * SIZEOF(JBLOCK);
+    }
+  }
+
+  if (space_per_minheight <= 0)
+    return;			/* no unrealized arrays, no work */
+
+  /* Determine amount of memory to actually use; this is system-dependent. */
+  avail_mem = jpeg_mem_available(cinfo, space_per_minheight, maximum_space,
+				 mem->total_space_allocated);
+
+  /* If the maximum space needed is available, make all the buffers full
+   * height; otherwise parcel it out with the same number of minheights
+   * in each buffer.
+   */
+  if (avail_mem >= maximum_space)
+    max_minheights = 1000000000L;
+  else {
+    max_minheights = avail_mem / space_per_minheight;
+    /* If there doesn't seem to be enough space, try to get the minimum
+     * anyway.  This allows a "stub" implementation of jpeg_mem_available().
+     */
+    if (max_minheights <= 0)
+      max_minheights = 1;
+  }
+
+  /* Allocate the in-memory buffers and initialize backing store as needed. */
+
+  for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) {
+    if (sptr->mem_buffer == NULL) { /* if not realized yet */
+      minheights = ((long) sptr->rows_in_array - 1L) / sptr->maxaccess + 1L;
+      if (minheights <= max_minheights) {
+	/* This buffer fits in memory */
+	sptr->rows_in_mem = sptr->rows_in_array;
+      } else {
+	/* It doesn't fit in memory, create backing store. */
+	sptr->rows_in_mem = (JDIMENSION) (max_minheights * sptr->maxaccess);
+	jpeg_open_backing_store(cinfo, & sptr->b_s_info,
+				(long) sptr->rows_in_array *
+				(long) sptr->samplesperrow *
+				(long) SIZEOF(JSAMPLE));
+	sptr->b_s_open = TRUE;
+      }
+      sptr->mem_buffer = alloc_sarray(cinfo, JPOOL_IMAGE,
+				      sptr->samplesperrow, sptr->rows_in_mem);
+      sptr->rowsperchunk = mem->last_rowsperchunk;
+      sptr->cur_start_row = 0;
+      sptr->first_undef_row = 0;
+      sptr->dirty = FALSE;
+    }
+  }
+
+  for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) {
+    if (bptr->mem_buffer == NULL) { /* if not realized yet */
+      minheights = ((long) bptr->rows_in_array - 1L) / bptr->maxaccess + 1L;
+      if (minheights <= max_minheights) {
+	/* This buffer fits in memory */
+	bptr->rows_in_mem = bptr->rows_in_array;
+      } else {
+	/* It doesn't fit in memory, create backing store. */
+	bptr->rows_in_mem = (JDIMENSION) (max_minheights * bptr->maxaccess);
+	jpeg_open_backing_store(cinfo, & bptr->b_s_info,
+				(long) bptr->rows_in_array *
+				(long) bptr->blocksperrow *
+				(long) SIZEOF(JBLOCK));
+	bptr->b_s_open = TRUE;
+      }
+      bptr->mem_buffer = alloc_barray(cinfo, JPOOL_IMAGE,
+				      bptr->blocksperrow, bptr->rows_in_mem);
+      bptr->rowsperchunk = mem->last_rowsperchunk;
+      bptr->cur_start_row = 0;
+      bptr->first_undef_row = 0;
+      bptr->dirty = FALSE;
+    }
+  }
+}
+
+
+LOCAL(void)
+do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, boolean writing)
+/* Do backing store read or write of a virtual sample array */
+{
+  long bytesperrow, file_offset, byte_count, rows, thisrow, i;
+
+  bytesperrow = (long) ptr->samplesperrow * SIZEOF(JSAMPLE);
+  file_offset = ptr->cur_start_row * bytesperrow;
+  /* Loop to read or write each allocation chunk in mem_buffer */
+  for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) {
+    /* One chunk, but check for short chunk at end of buffer */
+    rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i);
+    /* Transfer no more than is currently defined */
+    thisrow = (long) ptr->cur_start_row + i;
+    rows = MIN(rows, (long) ptr->first_undef_row - thisrow);
+    /* Transfer no more than fits in file */
+    rows = MIN(rows, (long) ptr->rows_in_array - thisrow);
+    if (rows <= 0)		/* this chunk might be past end of file! */
+      break;
+    byte_count = rows * bytesperrow;
+    if (writing)
+      (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info,
+					    (void FAR *) ptr->mem_buffer[i],
+					    file_offset, byte_count);
+    else
+      (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info,
+					   (void FAR *) ptr->mem_buffer[i],
+					   file_offset, byte_count);
+    file_offset += byte_count;
+  }
+}
+
+
+LOCAL(void)
+do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, boolean writing)
+/* Do backing store read or write of a virtual coefficient-block array */
+{
+  long bytesperrow, file_offset, byte_count, rows, thisrow, i;
+
+  bytesperrow = (long) ptr->blocksperrow * SIZEOF(JBLOCK);
+  file_offset = ptr->cur_start_row * bytesperrow;
+  /* Loop to read or write each allocation chunk in mem_buffer */
+  for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) {
+    /* One chunk, but check for short chunk at end of buffer */
+    rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i);
+    /* Transfer no more than is currently defined */
+    thisrow = (long) ptr->cur_start_row + i;
+    rows = MIN(rows, (long) ptr->first_undef_row - thisrow);
+    /* Transfer no more than fits in file */
+    rows = MIN(rows, (long) ptr->rows_in_array - thisrow);
+    if (rows <= 0)		/* this chunk might be past end of file! */
+      break;
+    byte_count = rows * bytesperrow;
+    if (writing)
+      (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info,
+					    (void FAR *) ptr->mem_buffer[i],
+					    file_offset, byte_count);
+    else
+      (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info,
+					   (void FAR *) ptr->mem_buffer[i],
+					   file_offset, byte_count);
+    file_offset += byte_count;
+  }
+}
+
+
+METHODDEF(JSAMPARRAY)
+access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr,
+		    JDIMENSION start_row, JDIMENSION num_rows,
+		    boolean writable)
+/* Access the part of a virtual sample array starting at start_row */
+/* and extending for num_rows rows.  writable is true if  */
+/* caller intends to modify the accessed area. */
+{
+  JDIMENSION end_row = start_row + num_rows;
+  JDIMENSION undef_row;
+
+  /* debugging check */
+  if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess ||
+      ptr->mem_buffer == NULL)
+    ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS);
+
+  /* Make the desired part of the virtual array accessible */
+  if (start_row < ptr->cur_start_row ||
+      end_row > ptr->cur_start_row+ptr->rows_in_mem) {
+    if (! ptr->b_s_open)
+      ERREXIT(cinfo, JERR_VIRTUAL_BUG);
+    /* Flush old buffer contents if necessary */
+    if (ptr->dirty) {
+      do_sarray_io(cinfo, ptr, TRUE);
+      ptr->dirty = FALSE;
+    }
+    /* Decide what part of virtual array to access.
+     * Algorithm: if target address > current window, assume forward scan,
+     * load starting at target address.  If target address < current window,
+     * assume backward scan, load so that target area is top of window.
+     * Note that when switching from forward write to forward read, will have
+     * start_row = 0, so the limiting case applies and we load from 0 anyway.
+     */
+    if (start_row > ptr->cur_start_row) {
+      ptr->cur_start_row = start_row;
+    } else {
+      /* use long arithmetic here to avoid overflow & unsigned problems */
+      long ltemp;
+
+      ltemp = (long) end_row - (long) ptr->rows_in_mem;
+      if (ltemp < 0)
+	ltemp = 0;		/* don't fall off front end of file */
+      ptr->cur_start_row = (JDIMENSION) ltemp;
+    }
+    /* Read in the selected part of the array.
+     * During the initial write pass, we will do no actual read
+     * because the selected part is all undefined.
+     */
+    do_sarray_io(cinfo, ptr, FALSE);
+  }
+  /* Ensure the accessed part of the array is defined; prezero if needed.
+   * To improve locality of access, we only prezero the part of the array
+   * that the caller is about to access, not the entire in-memory array.
+   */
+  if (ptr->first_undef_row < end_row) {
+    if (ptr->first_undef_row < start_row) {
+      if (writable)		/* writer skipped over a section of array */
+	ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS);
+      undef_row = start_row;	/* but reader is allowed to read ahead */
+    } else {
+      undef_row = ptr->first_undef_row;
+    }
+    if (writable)
+      ptr->first_undef_row = end_row;
+    if (ptr->pre_zero) {
+      size_t bytesperrow = (size_t) ptr->samplesperrow * SIZEOF(JSAMPLE);
+      undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */
+      end_row -= ptr->cur_start_row;
+      while (undef_row < end_row) {
+	FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow);
+	undef_row++;
+      }
+    } else {
+      if (! writable)		/* reader looking at undefined data */
+	ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS);
+    }
+  }
+  /* Flag the buffer dirty if caller will write in it */
+  if (writable)
+    ptr->dirty = TRUE;
+  /* Return address of proper part of the buffer */
+  return ptr->mem_buffer + (start_row - ptr->cur_start_row);
+}
+
+
+METHODDEF(JBLOCKARRAY)
+access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr,
+		    JDIMENSION start_row, JDIMENSION num_rows,
+		    boolean writable)
+/* Access the part of a virtual block array starting at start_row */
+/* and extending for num_rows rows.  writable is true if  */
+/* caller intends to modify the accessed area. */
+{
+  JDIMENSION end_row = start_row + num_rows;
+  JDIMENSION undef_row;
+
+  /* debugging check */
+  if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess ||
+      ptr->mem_buffer == NULL)
+    ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS);
+
+  /* Make the desired part of the virtual array accessible */
+  if (start_row < ptr->cur_start_row ||
+      end_row > ptr->cur_start_row+ptr->rows_in_mem) {
+    if (! ptr->b_s_open)
+      ERREXIT(cinfo, JERR_VIRTUAL_BUG);
+    /* Flush old buffer contents if necessary */
+    if (ptr->dirty) {
+      do_barray_io(cinfo, ptr, TRUE);
+      ptr->dirty = FALSE;
+    }
+    /* Decide what part of virtual array to access.
+     * Algorithm: if target address > current window, assume forward scan,
+     * load starting at target address.  If target address < current window,
+     * assume backward scan, load so that target area is top of window.
+     * Note that when switching from forward write to forward read, will have
+     * start_row = 0, so the limiting case applies and we load from 0 anyway.
+     */
+    if (start_row > ptr->cur_start_row) {
+      ptr->cur_start_row = start_row;
+    } else {
+      /* use long arithmetic here to avoid overflow & unsigned problems */
+      long ltemp;
+
+      ltemp = (long) end_row - (long) ptr->rows_in_mem;
+      if (ltemp < 0)
+	ltemp = 0;		/* don't fall off front end of file */
+      ptr->cur_start_row = (JDIMENSION) ltemp;
+    }
+    /* Read in the selected part of the array.
+     * During the initial write pass, we will do no actual read
+     * because the selected part is all undefined.
+     */
+    do_barray_io(cinfo, ptr, FALSE);
+  }
+  /* Ensure the accessed part of the array is defined; prezero if needed.
+   * To improve locality of access, we only prezero the part of the array
+   * that the caller is about to access, not the entire in-memory array.
+   */
+  if (ptr->first_undef_row < end_row) {
+    if (ptr->first_undef_row < start_row) {
+      if (writable)		/* writer skipped over a section of array */
+	ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS);
+      undef_row = start_row;	/* but reader is allowed to read ahead */
+    } else {
+      undef_row = ptr->first_undef_row;
+    }
+    if (writable)
+      ptr->first_undef_row = end_row;
+    if (ptr->pre_zero) {
+      size_t bytesperrow = (size_t) ptr->blocksperrow * SIZEOF(JBLOCK);
+      undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */
+      end_row -= ptr->cur_start_row;
+      while (undef_row < end_row) {
+	FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow);
+	undef_row++;
+      }
+    } else {
+      if (! writable)		/* reader looking at undefined data */
+	ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS);
+    }
+  }
+  /* Flag the buffer dirty if caller will write in it */
+  if (writable)
+    ptr->dirty = TRUE;
+  /* Return address of proper part of the buffer */
+  return ptr->mem_buffer + (start_row - ptr->cur_start_row);
+}
+
+
+/*
+ * Release all objects belonging to a specified pool.
+ */
+
+METHODDEF(void)
+free_pool (j_common_ptr cinfo, int pool_id)
+{
+  my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
+  small_pool_ptr shdr_ptr;
+  large_pool_ptr lhdr_ptr;
+  size_t space_freed;
+
+  if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS)
+    ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id);	/* safety check */
+
+#ifdef MEM_STATS
+  if (cinfo->err->trace_level > 1)
+    print_mem_stats(cinfo, pool_id); /* print pool's memory usage statistics */
+#endif
+
+  /* If freeing IMAGE pool, close any virtual arrays first */
+  if (pool_id == JPOOL_IMAGE) {
+    jvirt_sarray_ptr sptr;
+    jvirt_barray_ptr bptr;
+
+    for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) {
+      if (sptr->b_s_open) {	/* there may be no backing store */
+	sptr->b_s_open = FALSE;	/* prevent recursive close if error */
+	(*sptr->b_s_info.close_backing_store) (cinfo, & sptr->b_s_info);
+      }
+    }
+    mem->virt_sarray_list = NULL;
+    for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) {
+      if (bptr->b_s_open) {	/* there may be no backing store */
+	bptr->b_s_open = FALSE;	/* prevent recursive close if error */
+	(*bptr->b_s_info.close_backing_store) (cinfo, & bptr->b_s_info);
+      }
+    }
+    mem->virt_barray_list = NULL;
+  }
+
+  /* Release large objects */
+  lhdr_ptr = mem->large_list[pool_id];
+  mem->large_list[pool_id] = NULL;
+
+  while (lhdr_ptr != NULL) {
+    large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next;
+    space_freed = lhdr_ptr->hdr.bytes_used +
+		  lhdr_ptr->hdr.bytes_left +
+		  SIZEOF(large_pool_hdr);
+    jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed);
+    mem->total_space_allocated -= space_freed;
+    lhdr_ptr = next_lhdr_ptr;
+  }
+
+  /* Release small objects */
+  shdr_ptr = mem->small_list[pool_id];
+  mem->small_list[pool_id] = NULL;
+
+  while (shdr_ptr != NULL) {
+    small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next;
+    space_freed = shdr_ptr->hdr.bytes_used +
+		  shdr_ptr->hdr.bytes_left +
+		  SIZEOF(small_pool_hdr);
+    jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed);
+    mem->total_space_allocated -= space_freed;
+    shdr_ptr = next_shdr_ptr;
+  }
+}
+
+
+/*
+ * Close up shop entirely.
+ * Note that this cannot be called unless cinfo->mem is non-NULL.
+ */
+
+METHODDEF(void)
+self_destruct (j_common_ptr cinfo)
+{
+  int pool;
+
+  /* Close all backing store, release all memory.
+   * Releasing pools in reverse order might help avoid fragmentation
+   * with some (brain-damaged) malloc libraries.
+   */
+  for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) {
+    free_pool(cinfo, pool);
+  }
+
+  /* Release the memory manager control block too. */
+  jpeg_free_small(cinfo, (void *) cinfo->mem, SIZEOF(my_memory_mgr));
+  cinfo->mem = NULL;		/* ensures I will be called only once */
+
+  jpeg_mem_term(cinfo);		/* system-dependent cleanup */
+}
+
+
+/*
+ * Memory manager initialization.
+ * When this is called, only the error manager pointer is valid in cinfo!
+ */
+
+GLOBAL(void)
+jinit_memory_mgr (j_common_ptr cinfo)
+{
+  my_mem_ptr mem;
+  long max_to_use;
+  int pool;
+  size_t test_mac;
+
+  cinfo->mem = NULL;		/* for safety if init fails */
+
+  /* Check for configuration errors.
+   * SIZEOF(ALIGN_TYPE) should be a power of 2; otherwise, it probably
+   * doesn't reflect any real hardware alignment requirement.
+   * The test is a little tricky: for X>0, X and X-1 have no one-bits
+   * in common if and only if X is a power of 2, ie has only one one-bit.
+   * Some compilers may give an "unreachable code" warning here; ignore it.
+   */
+  if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0)
+    ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE);
+  /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be
+   * a multiple of SIZEOF(ALIGN_TYPE).
+   * Again, an "unreachable code" warning may be ignored here.
+   * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK.
+   */
+  test_mac = (size_t) MAX_ALLOC_CHUNK;
+  if ((long) test_mac != MAX_ALLOC_CHUNK ||
+      (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0)
+    ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK);
+
+  max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */
+
+  /* Attempt to allocate memory manager's control block */
+  mem = (my_mem_ptr) jpeg_get_small(cinfo, SIZEOF(my_memory_mgr));
+
+  if (mem == NULL) {
+    jpeg_mem_term(cinfo);	/* system-dependent cleanup */
+    ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 0);
+  }
+
+  /* OK, fill in the method pointers */
+  mem->pub.alloc_small = alloc_small;
+  mem->pub.alloc_large = alloc_large;
+  mem->pub.alloc_sarray = alloc_sarray;
+  mem->pub.alloc_barray = alloc_barray;
+  mem->pub.request_virt_sarray = request_virt_sarray;
+  mem->pub.request_virt_barray = request_virt_barray;
+  mem->pub.realize_virt_arrays = realize_virt_arrays;
+  mem->pub.access_virt_sarray = access_virt_sarray;
+  mem->pub.access_virt_barray = access_virt_barray;
+  mem->pub.free_pool = free_pool;
+  mem->pub.self_destruct = self_destruct;
+
+  /* Make MAX_ALLOC_CHUNK accessible to other modules */
+  mem->pub.max_alloc_chunk = MAX_ALLOC_CHUNK;
+
+  /* Initialize working state */
+  mem->pub.max_memory_to_use = max_to_use;
+
+  for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) {
+    mem->small_list[pool] = NULL;
+    mem->large_list[pool] = NULL;
+  }
+  mem->virt_sarray_list = NULL;
+  mem->virt_barray_list = NULL;
+
+  mem->total_space_allocated = SIZEOF(my_memory_mgr);
+
+  /* Declare ourselves open for business */
+  cinfo->mem = & mem->pub;
+
+  /* Check for an environment variable JPEGMEM; if found, override the
+   * default max_memory setting from jpeg_mem_init.  Note that the
+   * surrounding application may again override this value.
+   * If your system doesn't support getenv(), define NO_GETENV to disable
+   * this feature.
+   */
+#ifndef NO_GETENV
+  { char * memenv;
+
+    if ((memenv = getenv("JPEGMEM")) != NULL) {
+      char ch = 'x';
+
+      if (sscanf(memenv, "%ld%c", &max_to_use, &ch) > 0) {
+	if (ch == 'm' || ch == 'M')
+	  max_to_use *= 1000L;
+	mem->pub.max_memory_to_use = max_to_use * 1000L;
+      }
+    }
+  }
+#endif
+
+}
diff --git a/jpeg-8d/jmemname.c b/jpeg-8d/jmemname.c
new file mode 100644
index 0000000..ed96dee
--- /dev/null
+++ b/jpeg-8d/jmemname.c
@@ -0,0 +1,276 @@
+/*
+ * jmemname.c
+ *
+ * Copyright (C) 1992-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file provides a generic implementation of the system-dependent
+ * portion of the JPEG memory manager.  This implementation assumes that
+ * you must explicitly construct a name for each temp file.
+ * Also, the problem of determining the amount of memory available
+ * is shoved onto the user.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jmemsys.h"		/* import the system-dependent declarations */
+
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc(),free() */
+extern void * malloc JPP((size_t size));
+extern void free JPP((void *ptr));
+#endif
+
+#ifndef SEEK_SET		/* pre-ANSI systems may not define this; */
+#define SEEK_SET  0		/* if not, assume 0 is correct */
+#endif
+
+#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
+#define READ_BINARY	"r"
+#define RW_BINARY	"w+"
+#else
+#ifdef VMS			/* VMS is very nonstandard */
+#define READ_BINARY	"rb", "ctx=stm"
+#define RW_BINARY	"w+b", "ctx=stm"
+#else				/* standard ANSI-compliant case */
+#define READ_BINARY	"rb"
+#define RW_BINARY	"w+b"
+#endif
+#endif
+
+
+/*
+ * Selection of a file name for a temporary file.
+ * This is system-dependent!
+ *
+ * The code as given is suitable for most Unix systems, and it is easily
+ * modified for most non-Unix systems.  Some notes:
+ *  1.  The temp file is created in the directory named by TEMP_DIRECTORY.
+ *      The default value is /usr/tmp, which is the conventional place for
+ *      creating large temp files on Unix.  On other systems you'll probably
+ *      want to change the file location.  You can do this by editing the
+ *      #define, or (preferred) by defining TEMP_DIRECTORY in jconfig.h.
+ *
+ *  2.  If you need to change the file name as well as its location,
+ *      you can override the TEMP_FILE_NAME macro.  (Note that this is
+ *      actually a printf format string; it must contain %s and %d.)
+ *      Few people should need to do this.
+ *
+ *  3.  mktemp() is used to ensure that multiple processes running
+ *      simultaneously won't select the same file names.  If your system
+ *      doesn't have mktemp(), define NO_MKTEMP to do it the hard way.
+ *      (If you don't have <errno.h>, also define NO_ERRNO_H.)
+ *
+ *  4.  You probably want to define NEED_SIGNAL_CATCHER so that cjpeg.c/djpeg.c
+ *      will cause the temp files to be removed if you stop the program early.
+ */
+
+#ifndef TEMP_DIRECTORY		/* can override from jconfig.h or Makefile */
+#define TEMP_DIRECTORY  "/usr/tmp/" /* recommended setting for Unix */
+#endif
+
+static int next_file_num;	/* to distinguish among several temp files */
+
+#ifdef NO_MKTEMP
+
+#ifndef TEMP_FILE_NAME		/* can override from jconfig.h or Makefile */
+#define TEMP_FILE_NAME  "%sJPG%03d.TMP"
+#endif
+
+#ifndef NO_ERRNO_H
+#include <errno.h>		/* to define ENOENT */
+#endif
+
+/* ANSI C specifies that errno is a macro, but on older systems it's more
+ * likely to be a plain int variable.  And not all versions of errno.h
+ * bother to declare it, so we have to in order to be most portable.  Thus:
+ */
+#ifndef errno
+extern int errno;
+#endif
+
+
+LOCAL(void)
+select_file_name (char * fname)
+{
+  FILE * tfile;
+
+  /* Keep generating file names till we find one that's not in use */
+  for (;;) {
+    next_file_num++;		/* advance counter */
+    sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num);
+    if ((tfile = fopen(fname, READ_BINARY)) == NULL) {
+      /* fopen could have failed for a reason other than the file not
+       * being there; for example, file there but unreadable.
+       * If <errno.h> isn't available, then we cannot test the cause.
+       */
+#ifdef ENOENT
+      if (errno != ENOENT)
+	continue;
+#endif
+      break;
+    }
+    fclose(tfile);		/* oops, it's there; close tfile & try again */
+  }
+}
+
+#else /* ! NO_MKTEMP */
+
+/* Note that mktemp() requires the initial filename to end in six X's */
+#ifndef TEMP_FILE_NAME		/* can override from jconfig.h or Makefile */
+#define TEMP_FILE_NAME  "%sJPG%dXXXXXX"
+#endif
+
+LOCAL(void)
+select_file_name (char * fname)
+{
+  next_file_num++;		/* advance counter */
+  sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num);
+  mktemp(fname);		/* make sure file name is unique */
+  /* mktemp replaces the trailing XXXXXX with a unique string of characters */
+}
+
+#endif /* NO_MKTEMP */
+
+
+/*
+ * Memory allocation and freeing are controlled by the regular library
+ * routines malloc() and free().
+ */
+
+GLOBAL(void *)
+jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void *) malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
+{
+  free(object);
+}
+
+
+/*
+ * "Large" objects are treated the same as "small" ones.
+ * NB: although we include FAR keywords in the routine declarations,
+ * this file won't actually work in 80x86 small/medium model; at least,
+ * you probably won't be able to process useful-size images in only 64KB.
+ */
+
+GLOBAL(void FAR *)
+jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void FAR *) malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
+{
+  free(object);
+}
+
+
+/*
+ * This routine computes the total memory space available for allocation.
+ * It's impossible to do this in a portable way; our current solution is
+ * to make the user tell us (with a default value set at compile time).
+ * If you can actually get the available space, it's a good idea to subtract
+ * a slop factor of 5% or so.
+ */
+
+#ifndef DEFAULT_MAX_MEM		/* so can override from makefile */
+#define DEFAULT_MAX_MEM		1000000L /* default: one megabyte */
+#endif
+
+GLOBAL(long)
+jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
+		    long max_bytes_needed, long already_allocated)
+{
+  return cinfo->mem->max_memory_to_use - already_allocated;
+}
+
+
+/*
+ * Backing store (temporary file) management.
+ * Backing store objects are only used when the value returned by
+ * jpeg_mem_available is less than the total space needed.  You can dispense
+ * with these routines if you have plenty of virtual memory; see jmemnobs.c.
+ */
+
+
+METHODDEF(void)
+read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		    void FAR * buffer_address,
+		    long file_offset, long byte_count)
+{
+  if (fseek(info->temp_file, file_offset, SEEK_SET))
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+  if (JFREAD(info->temp_file, buffer_address, byte_count)
+      != (size_t) byte_count)
+    ERREXIT(cinfo, JERR_TFILE_READ);
+}
+
+
+METHODDEF(void)
+write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		     void FAR * buffer_address,
+		     long file_offset, long byte_count)
+{
+  if (fseek(info->temp_file, file_offset, SEEK_SET))
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+  if (JFWRITE(info->temp_file, buffer_address, byte_count)
+      != (size_t) byte_count)
+    ERREXIT(cinfo, JERR_TFILE_WRITE);
+}
+
+
+METHODDEF(void)
+close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  fclose(info->temp_file);	/* close the file */
+  unlink(info->temp_name);	/* delete the file */
+/* If your system doesn't have unlink(), use remove() instead.
+ * remove() is the ANSI-standard name for this function, but if
+ * your system was ANSI you'd be using jmemansi.c, right?
+ */
+  TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name);
+}
+
+
+/*
+ * Initial opening of a backing-store object.
+ */
+
+GLOBAL(void)
+jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+			 long total_bytes_needed)
+{
+  select_file_name(info->temp_name);
+  if ((info->temp_file = fopen(info->temp_name, RW_BINARY)) == NULL)
+    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
+  info->read_backing_store = read_backing_store;
+  info->write_backing_store = write_backing_store;
+  info->close_backing_store = close_backing_store;
+  TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
+}
+
+
+/*
+ * These routines take care of any system-dependent initialization and
+ * cleanup required.
+ */
+
+GLOBAL(long)
+jpeg_mem_init (j_common_ptr cinfo)
+{
+  next_file_num = 0;		/* initialize temp file name generator */
+  return DEFAULT_MAX_MEM;	/* default for max_memory_to_use */
+}
+
+GLOBAL(void)
+jpeg_mem_term (j_common_ptr cinfo)
+{
+  /* no work */
+}
diff --git a/jpeg-8d/jmemnobs.c b/jpeg-8d/jmemnobs.c
new file mode 100644
index 0000000..eb8c337
--- /dev/null
+++ b/jpeg-8d/jmemnobs.c
@@ -0,0 +1,109 @@
+/*
+ * jmemnobs.c
+ *
+ * Copyright (C) 1992-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file provides a really simple implementation of the system-
+ * dependent portion of the JPEG memory manager.  This implementation
+ * assumes that no backing-store files are needed: all required space
+ * can be obtained from malloc().
+ * This is very portable in the sense that it'll compile on almost anything,
+ * but you'd better have lots of main memory (or virtual memory) if you want
+ * to process big images.
+ * Note that the max_memory_to_use option is ignored by this implementation.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jmemsys.h"		/* import the system-dependent declarations */
+
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc(),free() */
+extern void * malloc JPP((size_t size));
+extern void free JPP((void *ptr));
+#endif
+
+
+/*
+ * Memory allocation and freeing are controlled by the regular library
+ * routines malloc() and free().
+ */
+
+GLOBAL(void *)
+jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void *) malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
+{
+  free(object);
+}
+
+
+/*
+ * "Large" objects are treated the same as "small" ones.
+ * NB: although we include FAR keywords in the routine declarations,
+ * this file won't actually work in 80x86 small/medium model; at least,
+ * you probably won't be able to process useful-size images in only 64KB.
+ */
+
+GLOBAL(void FAR *)
+jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void FAR *) malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
+{
+  free(object);
+}
+
+
+/*
+ * This routine computes the total memory space available for allocation.
+ * Here we always say, "we got all you want bud!"
+ */
+
+GLOBAL(long)
+jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
+		    long max_bytes_needed, long already_allocated)
+{
+  return max_bytes_needed;
+}
+
+
+/*
+ * Backing store (temporary file) management.
+ * Since jpeg_mem_available always promised the moon,
+ * this should never be called and we can just error out.
+ */
+
+GLOBAL(void)
+jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+			 long total_bytes_needed)
+{
+  ERREXIT(cinfo, JERR_NO_BACKING_STORE);
+}
+
+
+/*
+ * These routines take care of any system-dependent initialization and
+ * cleanup required.  Here, there isn't any.
+ */
+
+GLOBAL(long)
+jpeg_mem_init (j_common_ptr cinfo)
+{
+  return 0;			/* just set max_memory_to_use to 0 */
+}
+
+GLOBAL(void)
+jpeg_mem_term (j_common_ptr cinfo)
+{
+  /* no work */
+}
diff --git a/jpeg-8d/jmemsys.h b/jpeg-8d/jmemsys.h
new file mode 100644
index 0000000..6c3c6d3
--- /dev/null
+++ b/jpeg-8d/jmemsys.h
@@ -0,0 +1,198 @@
+/*
+ * jmemsys.h
+ *
+ * Copyright (C) 1992-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This include file defines the interface between the system-independent
+ * and system-dependent portions of the JPEG memory manager.  No other
+ * modules need include it.  (The system-independent portion is jmemmgr.c;
+ * there are several different versions of the system-dependent portion.)
+ *
+ * This file works as-is for the system-dependent memory managers supplied
+ * in the IJG distribution.  You may need to modify it if you write a
+ * custom memory manager.  If system-dependent changes are needed in
+ * this file, the best method is to #ifdef them based on a configuration
+ * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR
+ * and USE_MAC_MEMMGR.
+ */
+
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jpeg_get_small		jGetSmall
+#define jpeg_free_small		jFreeSmall
+#define jpeg_get_large		jGetLarge
+#define jpeg_free_large		jFreeLarge
+#define jpeg_mem_available	jMemAvail
+#define jpeg_open_backing_store	jOpenBackStore
+#define jpeg_mem_init		jMemInit
+#define jpeg_mem_term		jMemTerm
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+
+/*
+ * These two functions are used to allocate and release small chunks of
+ * memory.  (Typically the total amount requested through jpeg_get_small is
+ * no more than 20K or so; this will be requested in chunks of a few K each.)
+ * Behavior should be the same as for the standard library functions malloc
+ * and free; in particular, jpeg_get_small must return NULL on failure.
+ * On most systems, these ARE malloc and free.  jpeg_free_small is passed the
+ * size of the object being freed, just in case it's needed.
+ * On an 80x86 machine using small-data memory model, these manage near heap.
+ */
+
+EXTERN(void *) jpeg_get_small JPP((j_common_ptr cinfo, size_t sizeofobject));
+EXTERN(void) jpeg_free_small JPP((j_common_ptr cinfo, void * object,
+				  size_t sizeofobject));
+
+/*
+ * These two functions are used to allocate and release large chunks of
+ * memory (up to the total free space designated by jpeg_mem_available).
+ * The interface is the same as above, except that on an 80x86 machine,
+ * far pointers are used.  On most other machines these are identical to
+ * the jpeg_get/free_small routines; but we keep them separate anyway,
+ * in case a different allocation strategy is desirable for large chunks.
+ */
+
+EXTERN(void FAR *) jpeg_get_large JPP((j_common_ptr cinfo,
+				       size_t sizeofobject));
+EXTERN(void) jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object,
+				  size_t sizeofobject));
+
+/*
+ * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may
+ * be requested in a single call to jpeg_get_large (and jpeg_get_small for that
+ * matter, but that case should never come into play).  This macro is needed
+ * to model the 64Kb-segment-size limit of far addressing on 80x86 machines.
+ * On those machines, we expect that jconfig.h will provide a proper value.
+ * On machines with 32-bit flat address spaces, any large constant may be used.
+ *
+ * NB: jmemmgr.c expects that MAX_ALLOC_CHUNK will be representable as type
+ * size_t and will be a multiple of sizeof(align_type).
+ */
+
+#ifndef MAX_ALLOC_CHUNK		/* may be overridden in jconfig.h */
+#define MAX_ALLOC_CHUNK  1000000000L
+#endif
+
+/*
+ * This routine computes the total space still available for allocation by
+ * jpeg_get_large.  If more space than this is needed, backing store will be
+ * used.  NOTE: any memory already allocated must not be counted.
+ *
+ * There is a minimum space requirement, corresponding to the minimum
+ * feasible buffer sizes; jmemmgr.c will request that much space even if
+ * jpeg_mem_available returns zero.  The maximum space needed, enough to hold
+ * all working storage in memory, is also passed in case it is useful.
+ * Finally, the total space already allocated is passed.  If no better
+ * method is available, cinfo->mem->max_memory_to_use - already_allocated
+ * is often a suitable calculation.
+ *
+ * It is OK for jpeg_mem_available to underestimate the space available
+ * (that'll just lead to more backing-store access than is really necessary).
+ * However, an overestimate will lead to failure.  Hence it's wise to subtract
+ * a slop factor from the true available space.  5% should be enough.
+ *
+ * On machines with lots of virtual memory, any large constant may be returned.
+ * Conversely, zero may be returned to always use the minimum amount of memory.
+ */
+
+EXTERN(long) jpeg_mem_available JPP((j_common_ptr cinfo,
+				     long min_bytes_needed,
+				     long max_bytes_needed,
+				     long already_allocated));
+
+
+/*
+ * This structure holds whatever state is needed to access a single
+ * backing-store object.  The read/write/close method pointers are called
+ * by jmemmgr.c to manipulate the backing-store object; all other fields
+ * are private to the system-dependent backing store routines.
+ */
+
+#define TEMP_NAME_LENGTH   64	/* max length of a temporary file's name */
+
+
+#ifdef USE_MSDOS_MEMMGR		/* DOS-specific junk */
+
+typedef unsigned short XMSH;	/* type of extended-memory handles */
+typedef unsigned short EMSH;	/* type of expanded-memory handles */
+
+typedef union {
+  short file_handle;		/* DOS file handle if it's a temp file */
+  XMSH xms_handle;		/* handle if it's a chunk of XMS */
+  EMSH ems_handle;		/* handle if it's a chunk of EMS */
+} handle_union;
+
+#endif /* USE_MSDOS_MEMMGR */
+
+#ifdef USE_MAC_MEMMGR		/* Mac-specific junk */
+#include <Files.h>
+#endif /* USE_MAC_MEMMGR */
+
+
+typedef struct backing_store_struct * backing_store_ptr;
+
+typedef struct backing_store_struct {
+  /* Methods for reading/writing/closing this backing-store object */
+  JMETHOD(void, read_backing_store, (j_common_ptr cinfo,
+				     backing_store_ptr info,
+				     void FAR * buffer_address,
+				     long file_offset, long byte_count));
+  JMETHOD(void, write_backing_store, (j_common_ptr cinfo,
+				      backing_store_ptr info,
+				      void FAR * buffer_address,
+				      long file_offset, long byte_count));
+  JMETHOD(void, close_backing_store, (j_common_ptr cinfo,
+				      backing_store_ptr info));
+
+  /* Private fields for system-dependent backing-store management */
+#ifdef USE_MSDOS_MEMMGR
+  /* For the MS-DOS manager (jmemdos.c), we need: */
+  handle_union handle;		/* reference to backing-store storage object */
+  char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */
+#else
+#ifdef USE_MAC_MEMMGR
+  /* For the Mac manager (jmemmac.c), we need: */
+  short temp_file;		/* file reference number to temp file */
+  FSSpec tempSpec;		/* the FSSpec for the temp file */
+  char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */
+#else
+  /* For a typical implementation with temp files, we need: */
+  FILE * temp_file;		/* stdio reference to temp file */
+  char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */
+#endif
+#endif
+} backing_store_info;
+
+
+/*
+ * Initial opening of a backing-store object.  This must fill in the
+ * read/write/close pointers in the object.  The read/write routines
+ * may take an error exit if the specified maximum file size is exceeded.
+ * (If jpeg_mem_available always returns a large value, this routine can
+ * just take an error exit.)
+ */
+
+EXTERN(void) jpeg_open_backing_store JPP((j_common_ptr cinfo,
+					  backing_store_ptr info,
+					  long total_bytes_needed));
+
+
+/*
+ * These routines take care of any system-dependent initialization and
+ * cleanup required.  jpeg_mem_init will be called before anything is
+ * allocated (and, therefore, nothing in cinfo is of use except the error
+ * manager pointer).  It should return a suitable default value for
+ * max_memory_to_use; this may subsequently be overridden by the surrounding
+ * application.  (Note that max_memory_to_use is only important if
+ * jpeg_mem_available chooses to consult it ... no one else will.)
+ * jpeg_mem_term may assume that all requested memory has been freed and that
+ * all opened backing-store objects have been closed.
+ */
+
+EXTERN(long) jpeg_mem_init JPP((j_common_ptr cinfo));
+EXTERN(void) jpeg_mem_term JPP((j_common_ptr cinfo));
diff --git a/jpeg-8d/jmorecfg.h b/jpeg-8d/jmorecfg.h
new file mode 100644
index 0000000..6c085c3
--- /dev/null
+++ b/jpeg-8d/jmorecfg.h
@@ -0,0 +1,369 @@
+/*
+ * jmorecfg.h
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 1997-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains additional configuration options that customize the
+ * JPEG software for special applications or support machine-dependent
+ * optimizations.  Most users will not need to touch this file.
+ */
+
+
+/*
+ * Define BITS_IN_JSAMPLE as either
+ *   8   for 8-bit sample values (the usual setting)
+ *   12  for 12-bit sample values
+ * Only 8 and 12 are legal data precisions for lossy JPEG according to the
+ * JPEG standard, and the IJG code does not support anything else!
+ * We do not support run-time selection of data precision, sorry.
+ */
+
+#define BITS_IN_JSAMPLE  8	/* use 8 or 12 */
+
+
+/*
+ * Maximum number of components (color channels) allowed in JPEG image.
+ * To meet the letter of the JPEG spec, set this to 255.  However, darn
+ * few applications need more than 4 channels (maybe 5 for CMYK + alpha
+ * mask).  We recommend 10 as a reasonable compromise; use 4 if you are
+ * really short on memory.  (Each allowed component costs a hundred or so
+ * bytes of storage, whether actually used in an image or not.)
+ */
+
+#define MAX_COMPONENTS  10	/* maximum number of image components */
+
+
+/*
+ * Basic data types.
+ * You may need to change these if you have a machine with unusual data
+ * type sizes; for example, "char" not 8 bits, "short" not 16 bits,
+ * or "long" not 32 bits.  We don't care whether "int" is 16 or 32 bits,
+ * but it had better be at least 16.
+ */
+
+/* Representation of a single sample (pixel element value).
+ * We frequently allocate large arrays of these, so it's important to keep
+ * them small.  But if you have memory to burn and access to char or short
+ * arrays is very slow on your hardware, you might want to change these.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+/* JSAMPLE should be the smallest type that will hold the values 0..255.
+ * You can use a signed char by having GETJSAMPLE mask it with 0xFF.
+ */
+
+#ifdef HAVE_UNSIGNED_CHAR
+
+typedef unsigned char JSAMPLE;
+#define GETJSAMPLE(value)  ((int) (value))
+
+#else /* not HAVE_UNSIGNED_CHAR */
+
+typedef char JSAMPLE;
+#ifdef CHAR_IS_UNSIGNED
+#define GETJSAMPLE(value)  ((int) (value))
+#else
+#define GETJSAMPLE(value)  ((int) (value) & 0xFF)
+#endif /* CHAR_IS_UNSIGNED */
+
+#endif /* HAVE_UNSIGNED_CHAR */
+
+#define MAXJSAMPLE	255
+#define CENTERJSAMPLE	128
+
+#endif /* BITS_IN_JSAMPLE == 8 */
+
+
+#if BITS_IN_JSAMPLE == 12
+/* JSAMPLE should be the smallest type that will hold the values 0..4095.
+ * On nearly all machines "short" will do nicely.
+ */
+
+typedef short JSAMPLE;
+#define GETJSAMPLE(value)  ((int) (value))
+
+#define MAXJSAMPLE	4095
+#define CENTERJSAMPLE	2048
+
+#endif /* BITS_IN_JSAMPLE == 12 */
+
+
+/* Representation of a DCT frequency coefficient.
+ * This should be a signed value of at least 16 bits; "short" is usually OK.
+ * Again, we allocate large arrays of these, but you can change to int
+ * if you have memory to burn and "short" is really slow.
+ */
+
+typedef short JCOEF;
+
+
+/* Compressed datastreams are represented as arrays of JOCTET.
+ * These must be EXACTLY 8 bits wide, at least once they are written to
+ * external storage.  Note that when using the stdio data source/destination
+ * managers, this is also the data type passed to fread/fwrite.
+ */
+
+#ifdef HAVE_UNSIGNED_CHAR
+
+typedef unsigned char JOCTET;
+#define GETJOCTET(value)  (value)
+
+#else /* not HAVE_UNSIGNED_CHAR */
+
+typedef char JOCTET;
+#ifdef CHAR_IS_UNSIGNED
+#define GETJOCTET(value)  (value)
+#else
+#define GETJOCTET(value)  ((value) & 0xFF)
+#endif /* CHAR_IS_UNSIGNED */
+
+#endif /* HAVE_UNSIGNED_CHAR */
+
+
+/* These typedefs are used for various table entries and so forth.
+ * They must be at least as wide as specified; but making them too big
+ * won't cost a huge amount of memory, so we don't provide special
+ * extraction code like we did for JSAMPLE.  (In other words, these
+ * typedefs live at a different point on the speed/space tradeoff curve.)
+ */
+
+/* UINT8 must hold at least the values 0..255. */
+
+#ifdef HAVE_UNSIGNED_CHAR
+typedef unsigned char UINT8;
+#else /* not HAVE_UNSIGNED_CHAR */
+#ifdef CHAR_IS_UNSIGNED
+typedef char UINT8;
+#else /* not CHAR_IS_UNSIGNED */
+typedef short UINT8;
+#endif /* CHAR_IS_UNSIGNED */
+#endif /* HAVE_UNSIGNED_CHAR */
+
+/* UINT16 must hold at least the values 0..65535. */
+
+#ifdef HAVE_UNSIGNED_SHORT
+typedef unsigned short UINT16;
+#else /* not HAVE_UNSIGNED_SHORT */
+typedef unsigned int UINT16;
+#endif /* HAVE_UNSIGNED_SHORT */
+
+/* INT16 must hold at least the values -32768..32767. */
+
+#ifndef XMD_H			/* X11/xmd.h correctly defines INT16 */
+typedef short INT16;
+#endif
+
+/* INT32 must hold at least signed 32-bit values. */
+
+#ifndef XMD_H			/* X11/xmd.h correctly defines INT32 */
+#ifndef _BASETSD_H_		/* Microsoft defines it in basetsd.h */
+#ifndef _BASETSD_H		/* MinGW is slightly different */
+#ifndef QGLOBAL_H		/* Qt defines it in qglobal.h */
+typedef long INT32;
+#endif
+#endif
+#endif
+#endif
+
+/* Datatype used for image dimensions.  The JPEG standard only supports
+ * images up to 64K*64K due to 16-bit fields in SOF markers.  Therefore
+ * "unsigned int" is sufficient on all machines.  However, if you need to
+ * handle larger images and you don't mind deviating from the spec, you
+ * can change this datatype.
+ */
+
+typedef unsigned int JDIMENSION;
+
+#define JPEG_MAX_DIMENSION  65500L  /* a tad under 64K to prevent overflows */
+
+
+/* These macros are used in all function definitions and extern declarations.
+ * You could modify them if you need to change function linkage conventions;
+ * in particular, you'll need to do that to make the library a Windows DLL.
+ * Another application is to make all functions global for use with debuggers
+ * or code profilers that require it.
+ */
+
+/* a function called through method pointers: */
+#define METHODDEF(type)		static type
+/* a function used only in its module: */
+#define LOCAL(type)		static type
+/* a function referenced thru EXTERNs: */
+#define GLOBAL(type)		type
+/* a reference to a GLOBAL function: */
+#define EXTERN(type)		extern type
+
+
+/* This macro is used to declare a "method", that is, a function pointer.
+ * We want to supply prototype parameters if the compiler can cope.
+ * Note that the arglist parameter must be parenthesized!
+ * Again, you can customize this if you need special linkage keywords.
+ */
+
+#ifdef HAVE_PROTOTYPES
+#define JMETHOD(type,methodname,arglist)  type (*methodname) arglist
+#else
+#define JMETHOD(type,methodname,arglist)  type (*methodname) ()
+#endif
+
+
+/* Here is the pseudo-keyword for declaring pointers that must be "far"
+ * on 80x86 machines.  Most of the specialized coding for 80x86 is handled
+ * by just saying "FAR *" where such a pointer is needed.  In a few places
+ * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol.
+ */
+
+#ifndef FAR
+#ifdef NEED_FAR_POINTERS
+#define FAR  far
+#else
+#define FAR
+#endif
+#endif
+
+
+/*
+ * On a few systems, type boolean and/or its values FALSE, TRUE may appear
+ * in standard header files.  Or you may have conflicts with application-
+ * specific header files that you want to include together with these files.
+ * Defining HAVE_BOOLEAN before including jpeglib.h should make it work.
+ */
+
+#ifndef HAVE_BOOLEAN
+typedef int boolean;
+#endif
+#ifndef FALSE			/* in case these macros already exist */
+#define FALSE	0		/* values of boolean */
+#endif
+#ifndef TRUE
+#define TRUE	1
+#endif
+
+
+/*
+ * The remaining options affect code selection within the JPEG library,
+ * but they don't need to be visible to most applications using the library.
+ * To minimize application namespace pollution, the symbols won't be
+ * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined.
+ */
+
+#ifdef JPEG_INTERNALS
+#define JPEG_INTERNAL_OPTIONS
+#endif
+
+#ifdef JPEG_INTERNAL_OPTIONS
+
+
+/*
+ * These defines indicate whether to include various optional functions.
+ * Undefining some of these symbols will produce a smaller but less capable
+ * library.  Note that you can leave certain source files out of the
+ * compilation/linking process if you've #undef'd the corresponding symbols.
+ * (You may HAVE to do that if your compiler doesn't like null source files.)
+ */
+
+/* Capability options common to encoder and decoder: */
+
+#define DCT_ISLOW_SUPPORTED	/* slow but accurate integer algorithm */
+#define DCT_IFAST_SUPPORTED	/* faster, less accurate integer method */
+#define DCT_FLOAT_SUPPORTED	/* floating-point: accurate, fast on fast HW */
+
+/* Encoder capability options: */
+
+#define C_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
+#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
+#define C_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
+#define DCT_SCALING_SUPPORTED	    /* Input rescaling via DCT? (Requires DCT_ISLOW)*/
+#define ENTROPY_OPT_SUPPORTED	    /* Optimization of entropy coding parms? */
+/* Note: if you selected 12-bit data precision, it is dangerous to turn off
+ * ENTROPY_OPT_SUPPORTED.  The standard Huffman tables are only good for 8-bit
+ * precision, so jchuff.c normally uses entropy optimization to compute
+ * usable tables for higher precision.  If you don't want to do optimization,
+ * you'll have to supply different default Huffman tables.
+ * The exact same statements apply for progressive JPEG: the default tables
+ * don't work for progressive mode.  (This may get fixed, however.)
+ */
+#define INPUT_SMOOTHING_SUPPORTED   /* Input image smoothing option? */
+
+/* Decoder capability options: */
+
+#define D_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
+#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
+#define D_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
+#define IDCT_SCALING_SUPPORTED	    /* Output rescaling via IDCT? */
+#define SAVE_MARKERS_SUPPORTED	    /* jpeg_save_markers() needed? */
+#define BLOCK_SMOOTHING_SUPPORTED   /* Block smoothing? (Progressive only) */
+#undef  UPSAMPLE_SCALING_SUPPORTED  /* Output rescaling at upsample stage? */
+#define UPSAMPLE_MERGING_SUPPORTED  /* Fast path for sloppy upsampling? */
+#define QUANT_1PASS_SUPPORTED	    /* 1-pass color quantization? */
+#define QUANT_2PASS_SUPPORTED	    /* 2-pass color quantization? */
+
+/* more capability options later, no doubt */
+
+
+/*
+ * Ordering of RGB data in scanlines passed to or from the application.
+ * If your application wants to deal with data in the order B,G,R, just
+ * change these macros.  You can also deal with formats such as R,G,B,X
+ * (one extra byte per pixel) by changing RGB_PIXELSIZE.  Note that changing
+ * the offsets will also change the order in which colormap data is organized.
+ * RESTRICTIONS:
+ * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats.
+ * 2. The color quantizer modules will not behave desirably if RGB_PIXELSIZE
+ *    is not 3 (they don't understand about dummy color components!).  So you
+ *    can't use color quantization if you change that value.
+ */
+
+#define RGB_RED		0	/* Offset of Red in an RGB scanline element */
+#define RGB_GREEN	1	/* Offset of Green */
+#define RGB_BLUE	2	/* Offset of Blue */
+#define RGB_PIXELSIZE	3	/* JSAMPLEs per RGB scanline element */
+
+
+/* Definitions for speed-related optimizations. */
+
+
+/* If your compiler supports inline functions, define INLINE
+ * as the inline keyword; otherwise define it as empty.
+ */
+
+#ifndef INLINE
+#ifdef __GNUC__			/* for instance, GNU C knows about inline */
+#define INLINE __inline__
+#endif
+#ifndef INLINE
+#define INLINE			/* default is to define it as empty */
+#endif
+#endif
+
+
+/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying
+ * two 16-bit shorts is faster than multiplying two ints.  Define MULTIPLIER
+ * as short on such a machine.  MULTIPLIER must be at least 16 bits wide.
+ */
+
+#ifndef MULTIPLIER
+#define MULTIPLIER  int		/* type for fastest integer multiply */
+#endif
+
+
+/* FAST_FLOAT should be either float or double, whichever is done faster
+ * by your compiler.  (Note that this type is only used in the floating point
+ * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.)
+ * Typically, float is faster in ANSI C compilers, while double is faster in
+ * pre-ANSI compilers (because they insist on converting to double anyway).
+ * The code below therefore chooses float if we have ANSI-style prototypes.
+ */
+
+#ifndef FAST_FLOAT
+#ifdef HAVE_PROTOTYPES
+#define FAST_FLOAT  float
+#else
+#define FAST_FLOAT  double
+#endif
+#endif
+
+#endif /* JPEG_INTERNAL_OPTIONS */
diff --git a/jpeg-8d/jpegint.h b/jpeg-8d/jpegint.h
new file mode 100644
index 0000000..c0d5c14
--- /dev/null
+++ b/jpeg-8d/jpegint.h
@@ -0,0 +1,426 @@
+/*
+ * jpegint.h
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 1997-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file provides common declarations for the various JPEG modules.
+ * These declarations are considered internal to the JPEG library; most
+ * applications using the library shouldn't need to include this file.
+ */
+
+
+/* Declarations for both compression & decompression */
+
+typedef enum {			/* Operating modes for buffer controllers */
+	JBUF_PASS_THRU,		/* Plain stripwise operation */
+	/* Remaining modes require a full-image buffer to have been created */
+	JBUF_SAVE_SOURCE,	/* Run source subobject only, save output */
+	JBUF_CRANK_DEST,	/* Run dest subobject only, using saved data */
+	JBUF_SAVE_AND_PASS	/* Run both subobjects, save output */
+} J_BUF_MODE;
+
+/* Values of global_state field (jdapi.c has some dependencies on ordering!) */
+#define CSTATE_START	100	/* after create_compress */
+#define CSTATE_SCANNING	101	/* start_compress done, write_scanlines OK */
+#define CSTATE_RAW_OK	102	/* start_compress done, write_raw_data OK */
+#define CSTATE_WRCOEFS	103	/* jpeg_write_coefficients done */
+#define DSTATE_START	200	/* after create_decompress */
+#define DSTATE_INHEADER	201	/* reading header markers, no SOS yet */
+#define DSTATE_READY	202	/* found SOS, ready for start_decompress */
+#define DSTATE_PRELOAD	203	/* reading multiscan file in start_decompress*/
+#define DSTATE_PRESCAN	204	/* performing dummy pass for 2-pass quant */
+#define DSTATE_SCANNING	205	/* start_decompress done, read_scanlines OK */
+#define DSTATE_RAW_OK	206	/* start_decompress done, read_raw_data OK */
+#define DSTATE_BUFIMAGE	207	/* expecting jpeg_start_output */
+#define DSTATE_BUFPOST	208	/* looking for SOS/EOI in jpeg_finish_output */
+#define DSTATE_RDCOEFS	209	/* reading file in jpeg_read_coefficients */
+#define DSTATE_STOPPING	210	/* looking for EOI in jpeg_finish_decompress */
+
+
+/* Declarations for compression modules */
+
+/* Master control module */
+struct jpeg_comp_master {
+  JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo));
+  JMETHOD(void, pass_startup, (j_compress_ptr cinfo));
+  JMETHOD(void, finish_pass, (j_compress_ptr cinfo));
+
+  /* State variables made visible to other modules */
+  boolean call_pass_startup;	/* True if pass_startup must be called */
+  boolean is_last_pass;		/* True during last pass */
+};
+
+/* Main buffer control (downsampled-data buffer) */
+struct jpeg_c_main_controller {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
+  JMETHOD(void, process_data, (j_compress_ptr cinfo,
+			       JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+			       JDIMENSION in_rows_avail));
+};
+
+/* Compression preprocessing (downsampling input buffer control) */
+struct jpeg_c_prep_controller {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
+  JMETHOD(void, pre_process_data, (j_compress_ptr cinfo,
+				   JSAMPARRAY input_buf,
+				   JDIMENSION *in_row_ctr,
+				   JDIMENSION in_rows_avail,
+				   JSAMPIMAGE output_buf,
+				   JDIMENSION *out_row_group_ctr,
+				   JDIMENSION out_row_groups_avail));
+};
+
+/* Coefficient buffer control */
+struct jpeg_c_coef_controller {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
+  JMETHOD(boolean, compress_data, (j_compress_ptr cinfo,
+				   JSAMPIMAGE input_buf));
+};
+
+/* Colorspace conversion */
+struct jpeg_color_converter {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
+  JMETHOD(void, color_convert, (j_compress_ptr cinfo,
+				JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+				JDIMENSION output_row, int num_rows));
+};
+
+/* Downsampling */
+struct jpeg_downsampler {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
+  JMETHOD(void, downsample, (j_compress_ptr cinfo,
+			     JSAMPIMAGE input_buf, JDIMENSION in_row_index,
+			     JSAMPIMAGE output_buf,
+			     JDIMENSION out_row_group_index));
+
+  boolean need_context_rows;	/* TRUE if need rows above & below */
+};
+
+/* Forward DCT (also controls coefficient quantization) */
+typedef JMETHOD(void, forward_DCT_ptr,
+		(j_compress_ptr cinfo, jpeg_component_info * compptr,
+		 JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
+		 JDIMENSION start_row, JDIMENSION start_col,
+		 JDIMENSION num_blocks));
+
+struct jpeg_forward_dct {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
+  /* It is useful to allow each component to have a separate FDCT method. */
+  forward_DCT_ptr forward_DCT[MAX_COMPONENTS];
+};
+
+/* Entropy encoding */
+struct jpeg_entropy_encoder {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics));
+  JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data));
+  JMETHOD(void, finish_pass, (j_compress_ptr cinfo));
+};
+
+/* Marker writing */
+struct jpeg_marker_writer {
+  JMETHOD(void, write_file_header, (j_compress_ptr cinfo));
+  JMETHOD(void, write_frame_header, (j_compress_ptr cinfo));
+  JMETHOD(void, write_scan_header, (j_compress_ptr cinfo));
+  JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo));
+  JMETHOD(void, write_tables_only, (j_compress_ptr cinfo));
+  /* These routines are exported to allow insertion of extra markers */
+  /* Probably only COM and APPn markers should be written this way */
+  JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker,
+				      unsigned int datalen));
+  JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val));
+};
+
+
+/* Declarations for decompression modules */
+
+/* Master control module */
+struct jpeg_decomp_master {
+  JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo));
+  JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo));
+
+  /* State variables made visible to other modules */
+  boolean is_dummy_pass;	/* True during 1st pass for 2-pass quant */
+};
+
+/* Input control module */
+struct jpeg_input_controller {
+  JMETHOD(int, consume_input, (j_decompress_ptr cinfo));
+  JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo));
+  JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo));
+  JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo));
+
+  /* State variables made visible to other modules */
+  boolean has_multiple_scans;	/* True if file has multiple scans */
+  boolean eoi_reached;		/* True when EOI has been consumed */
+};
+
+/* Main buffer control (downsampled-data buffer) */
+struct jpeg_d_main_controller {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode));
+  JMETHOD(void, process_data, (j_decompress_ptr cinfo,
+			       JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+			       JDIMENSION out_rows_avail));
+};
+
+/* Coefficient buffer control */
+struct jpeg_d_coef_controller {
+  JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo));
+  JMETHOD(int, consume_data, (j_decompress_ptr cinfo));
+  JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo));
+  JMETHOD(int, decompress_data, (j_decompress_ptr cinfo,
+				 JSAMPIMAGE output_buf));
+  /* Pointer to array of coefficient virtual arrays, or NULL if none */
+  jvirt_barray_ptr *coef_arrays;
+};
+
+/* Decompression postprocessing (color quantization buffer control) */
+struct jpeg_d_post_controller {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode));
+  JMETHOD(void, post_process_data, (j_decompress_ptr cinfo,
+				    JSAMPIMAGE input_buf,
+				    JDIMENSION *in_row_group_ctr,
+				    JDIMENSION in_row_groups_avail,
+				    JSAMPARRAY output_buf,
+				    JDIMENSION *out_row_ctr,
+				    JDIMENSION out_rows_avail));
+};
+
+/* Marker reading & parsing */
+struct jpeg_marker_reader {
+  JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo));
+  /* Read markers until SOS or EOI.
+   * Returns same codes as are defined for jpeg_consume_input:
+   * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
+   */
+  JMETHOD(int, read_markers, (j_decompress_ptr cinfo));
+  /* Read a restart marker --- exported for use by entropy decoder only */
+  jpeg_marker_parser_method read_restart_marker;
+
+  /* State of marker reader --- nominally internal, but applications
+   * supplying COM or APPn handlers might like to know the state.
+   */
+  boolean saw_SOI;		/* found SOI? */
+  boolean saw_SOF;		/* found SOF? */
+  int next_restart_num;		/* next restart number expected (0-7) */
+  unsigned int discarded_bytes;	/* # of bytes skipped looking for a marker */
+};
+
+/* Entropy decoding */
+struct jpeg_entropy_decoder {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
+  JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo,
+				JBLOCKROW *MCU_data));
+};
+
+/* Inverse DCT (also performs dequantization) */
+typedef JMETHOD(void, inverse_DCT_method_ptr,
+		(j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JCOEFPTR coef_block,
+		 JSAMPARRAY output_buf, JDIMENSION output_col));
+
+struct jpeg_inverse_dct {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
+  /* It is useful to allow each component to have a separate IDCT method. */
+  inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS];
+};
+
+/* Upsampling (note that upsampler must also call color converter) */
+struct jpeg_upsampler {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
+  JMETHOD(void, upsample, (j_decompress_ptr cinfo,
+			   JSAMPIMAGE input_buf,
+			   JDIMENSION *in_row_group_ctr,
+			   JDIMENSION in_row_groups_avail,
+			   JSAMPARRAY output_buf,
+			   JDIMENSION *out_row_ctr,
+			   JDIMENSION out_rows_avail));
+
+  boolean need_context_rows;	/* TRUE if need rows above & below */
+};
+
+/* Colorspace conversion */
+struct jpeg_color_deconverter {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
+  JMETHOD(void, color_convert, (j_decompress_ptr cinfo,
+				JSAMPIMAGE input_buf, JDIMENSION input_row,
+				JSAMPARRAY output_buf, int num_rows));
+};
+
+/* Color quantization or color precision reduction */
+struct jpeg_color_quantizer {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan));
+  JMETHOD(void, color_quantize, (j_decompress_ptr cinfo,
+				 JSAMPARRAY input_buf, JSAMPARRAY output_buf,
+				 int num_rows));
+  JMETHOD(void, finish_pass, (j_decompress_ptr cinfo));
+  JMETHOD(void, new_color_map, (j_decompress_ptr cinfo));
+};
+
+
+/* Miscellaneous useful macros */
+
+#undef MAX
+#define MAX(a,b)	((a) > (b) ? (a) : (b))
+#undef MIN
+#define MIN(a,b)	((a) < (b) ? (a) : (b))
+
+
+/* We assume that right shift corresponds to signed division by 2 with
+ * rounding towards minus infinity.  This is correct for typical "arithmetic
+ * shift" instructions that shift in copies of the sign bit.  But some
+ * C compilers implement >> with an unsigned shift.  For these machines you
+ * must define RIGHT_SHIFT_IS_UNSIGNED.
+ * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity.
+ * It is only applied with constant shift counts.  SHIFT_TEMPS must be
+ * included in the variables of any routine using RIGHT_SHIFT.
+ */
+
+#ifdef RIGHT_SHIFT_IS_UNSIGNED
+#define SHIFT_TEMPS	INT32 shift_temp;
+#define RIGHT_SHIFT(x,shft)  \
+	((shift_temp = (x)) < 0 ? \
+	 (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \
+	 (shift_temp >> (shft)))
+#else
+#define SHIFT_TEMPS
+#define RIGHT_SHIFT(x,shft)	((x) >> (shft))
+#endif
+
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jinit_compress_master	jICompress
+#define jinit_c_master_control	jICMaster
+#define jinit_c_main_controller	jICMainC
+#define jinit_c_prep_controller	jICPrepC
+#define jinit_c_coef_controller	jICCoefC
+#define jinit_color_converter	jICColor
+#define jinit_downsampler	jIDownsampler
+#define jinit_forward_dct	jIFDCT
+#define jinit_huff_encoder	jIHEncoder
+#define jinit_arith_encoder	jIAEncoder
+#define jinit_marker_writer	jIMWriter
+#define jinit_master_decompress	jIDMaster
+#define jinit_d_main_controller	jIDMainC
+#define jinit_d_coef_controller	jIDCoefC
+#define jinit_d_post_controller	jIDPostC
+#define jinit_input_controller	jIInCtlr
+#define jinit_marker_reader	jIMReader
+#define jinit_huff_decoder	jIHDecoder
+#define jinit_arith_decoder	jIADecoder
+#define jinit_inverse_dct	jIIDCT
+#define jinit_upsampler		jIUpsampler
+#define jinit_color_deconverter	jIDColor
+#define jinit_1pass_quantizer	jI1Quant
+#define jinit_2pass_quantizer	jI2Quant
+#define jinit_merged_upsampler	jIMUpsampler
+#define jinit_memory_mgr	jIMemMgr
+#define jdiv_round_up		jDivRound
+#define jround_up		jRound
+#define jzero_far		jZeroFar
+#define jcopy_sample_rows	jCopySamples
+#define jcopy_block_row		jCopyBlocks
+#define jpeg_zigzag_order	jZIGTable
+#define jpeg_natural_order	jZAGTable
+#define jpeg_natural_order7	jZAG7Table
+#define jpeg_natural_order6	jZAG6Table
+#define jpeg_natural_order5	jZAG5Table
+#define jpeg_natural_order4	jZAG4Table
+#define jpeg_natural_order3	jZAG3Table
+#define jpeg_natural_order2	jZAG2Table
+#define jpeg_aritab		jAriTab
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+
+/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays
+ * and coefficient-block arrays.  This won't work on 80x86 because the arrays
+ * are FAR and we're assuming a small-pointer memory model.  However, some
+ * DOS compilers provide far-pointer versions of memcpy() and memset() even
+ * in the small-model libraries.  These will be used if USE_FMEM is defined.
+ * Otherwise, the routines in jutils.c do it the hard way.
+ */
+
+#ifndef NEED_FAR_POINTERS	/* normal case, same as regular macro */
+#define FMEMZERO(target,size)	MEMZERO(target,size)
+#else				/* 80x86 case */
+#ifdef USE_FMEM
+#define FMEMZERO(target,size)	_fmemset((void FAR *)(target), 0, (size_t)(size))
+#else
+EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero));
+#define FMEMZERO(target,size)	jzero_far(target, size)
+#endif
+#endif
+
+
+/* Compression module initialization routines */
+EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo,
+					 boolean transcode_only));
+EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo,
+					  boolean need_full_buffer));
+EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo,
+					  boolean need_full_buffer));
+EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo,
+					  boolean need_full_buffer));
+EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo));
+/* Decompression module initialization routines */
+EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo,
+					  boolean need_full_buffer));
+EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo,
+					  boolean need_full_buffer));
+EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo,
+					  boolean need_full_buffer));
+EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo));
+/* Memory manager initialization */
+EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo));
+
+/* Utility routines in jutils.c */
+EXTERN(long) jdiv_round_up JPP((long a, long b));
+EXTERN(long) jround_up JPP((long a, long b));
+EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row,
+				    JSAMPARRAY output_array, int dest_row,
+				    int num_rows, JDIMENSION num_cols));
+EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row,
+				  JDIMENSION num_blocks));
+/* Constant tables in jutils.c */
+#if 0				/* This table is not actually needed in v6a */
+extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */
+#endif
+extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */
+extern const int jpeg_natural_order7[]; /* zz to natural order for 7x7 block */
+extern const int jpeg_natural_order6[]; /* zz to natural order for 6x6 block */
+extern const int jpeg_natural_order5[]; /* zz to natural order for 5x5 block */
+extern const int jpeg_natural_order4[]; /* zz to natural order for 4x4 block */
+extern const int jpeg_natural_order3[]; /* zz to natural order for 3x3 block */
+extern const int jpeg_natural_order2[]; /* zz to natural order for 2x2 block */
+
+/* Arithmetic coding probability estimation tables in jaricom.c */
+extern const INT32 jpeg_aritab[];
+
+/* Suppress undefined-structure complaints if necessary. */
+
+#ifdef INCOMPLETE_TYPES_BROKEN
+#ifndef AM_MEMORY_MANAGER	/* only jmemmgr.c defines these */
+struct jvirt_sarray_control { long dummy; };
+struct jvirt_barray_control { long dummy; };
+#endif
+#endif /* INCOMPLETE_TYPES_BROKEN */
diff --git a/jpeg-8d/jpeglib.h b/jpeg-8d/jpeglib.h
new file mode 100644
index 0000000..1327cff
--- /dev/null
+++ b/jpeg-8d/jpeglib.h
@@ -0,0 +1,1160 @@
+/*
+ * jpeglib.h
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2002-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file defines the application interface for the JPEG library.
+ * Most applications using the library need only include this file,
+ * and perhaps jerror.h if they want to know the exact error codes.
+ */
+
+#ifndef JPEGLIB_H
+#define JPEGLIB_H
+
+/*
+ * First we include the configuration files that record how this
+ * installation of the JPEG library is set up.  jconfig.h can be
+ * generated automatically for many systems.  jmorecfg.h contains
+ * manual configuration options that most people need not worry about.
+ */
+
+#ifndef JCONFIG_INCLUDED	/* in case jinclude.h already did */
+#include "jconfig.h"		/* widely used configuration options */
+#endif
+#include "jmorecfg.h"		/* seldom changed options */
+
+
+#ifdef __cplusplus
+#ifndef DONT_USE_EXTERN_C
+extern "C" {
+#endif
+#endif
+
+/* Version IDs for the JPEG library.
+ * Might be useful for tests like "#if JPEG_LIB_VERSION >= 80".
+ */
+
+#define JPEG_LIB_VERSION        80	/* Compatibility version 8.0 */
+#define JPEG_LIB_VERSION_MAJOR  8
+#define JPEG_LIB_VERSION_MINOR  4
+
+
+/* Various constants determining the sizes of things.
+ * All of these are specified by the JPEG standard, so don't change them
+ * if you want to be compatible.
+ */
+
+#define DCTSIZE		    8	/* The basic DCT block is 8x8 coefficients */
+#define DCTSIZE2	    64	/* DCTSIZE squared; # of elements in a block */
+#define NUM_QUANT_TBLS      4	/* Quantization tables are numbered 0..3 */
+#define NUM_HUFF_TBLS       4	/* Huffman tables are numbered 0..3 */
+#define NUM_ARITH_TBLS      16	/* Arith-coding tables are numbered 0..15 */
+#define MAX_COMPS_IN_SCAN   4	/* JPEG limit on # of components in one scan */
+#define MAX_SAMP_FACTOR     4	/* JPEG limit on sampling factors */
+/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard;
+ * the PostScript DCT filter can emit files with many more than 10 blocks/MCU.
+ * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU
+ * to handle it.  We even let you do this from the jconfig.h file.  However,
+ * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe
+ * sometimes emits noncompliant files doesn't mean you should too.
+ */
+#define C_MAX_BLOCKS_IN_MCU   10 /* compressor's limit on blocks per MCU */
+#ifndef D_MAX_BLOCKS_IN_MCU
+#define D_MAX_BLOCKS_IN_MCU   10 /* decompressor's limit on blocks per MCU */
+#endif
+
+
+/* Data structures for images (arrays of samples and of DCT coefficients).
+ * On 80x86 machines, the image arrays are too big for near pointers,
+ * but the pointer arrays can fit in near memory.
+ */
+
+typedef JSAMPLE FAR *JSAMPROW;	/* ptr to one image row of pixel samples. */
+typedef JSAMPROW *JSAMPARRAY;	/* ptr to some rows (a 2-D sample array) */
+typedef JSAMPARRAY *JSAMPIMAGE;	/* a 3-D sample array: top index is color */
+
+typedef JCOEF JBLOCK[DCTSIZE2];	/* one block of coefficients */
+typedef JBLOCK FAR *JBLOCKROW;	/* pointer to one row of coefficient blocks */
+typedef JBLOCKROW *JBLOCKARRAY;		/* a 2-D array of coefficient blocks */
+typedef JBLOCKARRAY *JBLOCKIMAGE;	/* a 3-D array of coefficient blocks */
+
+typedef JCOEF FAR *JCOEFPTR;	/* useful in a couple of places */
+
+
+/* Types for JPEG compression parameters and working tables. */
+
+
+/* DCT coefficient quantization tables. */
+
+typedef struct {
+  /* This array gives the coefficient quantizers in natural array order
+   * (not the zigzag order in which they are stored in a JPEG DQT marker).
+   * CAUTION: IJG versions prior to v6a kept this array in zigzag order.
+   */
+  UINT16 quantval[DCTSIZE2];	/* quantization step for each coefficient */
+  /* This field is used only during compression.  It's initialized FALSE when
+   * the table is created, and set TRUE when it's been output to the file.
+   * You could suppress output of a table by setting this to TRUE.
+   * (See jpeg_suppress_tables for an example.)
+   */
+  boolean sent_table;		/* TRUE when table has been output */
+} JQUANT_TBL;
+
+
+/* Huffman coding tables. */
+
+typedef struct {
+  /* These two fields directly represent the contents of a JPEG DHT marker */
+  UINT8 bits[17];		/* bits[k] = # of symbols with codes of */
+				/* length k bits; bits[0] is unused */
+  UINT8 huffval[256];		/* The symbols, in order of incr code length */
+  /* This field is used only during compression.  It's initialized FALSE when
+   * the table is created, and set TRUE when it's been output to the file.
+   * You could suppress output of a table by setting this to TRUE.
+   * (See jpeg_suppress_tables for an example.)
+   */
+  boolean sent_table;		/* TRUE when table has been output */
+} JHUFF_TBL;
+
+
+/* Basic info about one component (color channel). */
+
+typedef struct {
+  /* These values are fixed over the whole image. */
+  /* For compression, they must be supplied by parameter setup; */
+  /* for decompression, they are read from the SOF marker. */
+  int component_id;		/* identifier for this component (0..255) */
+  int component_index;		/* its index in SOF or cinfo->comp_info[] */
+  int h_samp_factor;		/* horizontal sampling factor (1..4) */
+  int v_samp_factor;		/* vertical sampling factor (1..4) */
+  int quant_tbl_no;		/* quantization table selector (0..3) */
+  /* These values may vary between scans. */
+  /* For compression, they must be supplied by parameter setup; */
+  /* for decompression, they are read from the SOS marker. */
+  /* The decompressor output side may not use these variables. */
+  int dc_tbl_no;		/* DC entropy table selector (0..3) */
+  int ac_tbl_no;		/* AC entropy table selector (0..3) */
+  
+  /* Remaining fields should be treated as private by applications. */
+  
+  /* These values are computed during compression or decompression startup: */
+  /* Component's size in DCT blocks.
+   * Any dummy blocks added to complete an MCU are not counted; therefore
+   * these values do not depend on whether a scan is interleaved or not.
+   */
+  JDIMENSION width_in_blocks;
+  JDIMENSION height_in_blocks;
+  /* Size of a DCT block in samples,
+   * reflecting any scaling we choose to apply during the DCT step.
+   * Values from 1 to 16 are supported.
+   * Note that different components may receive different DCT scalings.
+   */
+  int DCT_h_scaled_size;
+  int DCT_v_scaled_size;
+  /* The downsampled dimensions are the component's actual, unpadded number
+   * of samples at the main buffer (preprocessing/compression interface);
+   * DCT scaling is included, so
+   * downsampled_width = ceil(image_width * Hi/Hmax * DCT_h_scaled_size/DCTSIZE)
+   * and similarly for height.
+   */
+  JDIMENSION downsampled_width;	 /* actual width in samples */
+  JDIMENSION downsampled_height; /* actual height in samples */
+  /* This flag is used only for decompression.  In cases where some of the
+   * components will be ignored (eg grayscale output from YCbCr image),
+   * we can skip most computations for the unused components.
+   */
+  boolean component_needed;	/* do we need the value of this component? */
+
+  /* These values are computed before starting a scan of the component. */
+  /* The decompressor output side may not use these variables. */
+  int MCU_width;		/* number of blocks per MCU, horizontally */
+  int MCU_height;		/* number of blocks per MCU, vertically */
+  int MCU_blocks;		/* MCU_width * MCU_height */
+  int MCU_sample_width;	/* MCU width in samples: MCU_width * DCT_h_scaled_size */
+  int last_col_width;		/* # of non-dummy blocks across in last MCU */
+  int last_row_height;		/* # of non-dummy blocks down in last MCU */
+
+  /* Saved quantization table for component; NULL if none yet saved.
+   * See jdinput.c comments about the need for this information.
+   * This field is currently used only for decompression.
+   */
+  JQUANT_TBL * quant_table;
+
+  /* Private per-component storage for DCT or IDCT subsystem. */
+  void * dct_table;
+} jpeg_component_info;
+
+
+/* The script for encoding a multiple-scan file is an array of these: */
+
+typedef struct {
+  int comps_in_scan;		/* number of components encoded in this scan */
+  int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */
+  int Ss, Se;			/* progressive JPEG spectral selection parms */
+  int Ah, Al;			/* progressive JPEG successive approx. parms */
+} jpeg_scan_info;
+
+/* The decompressor can save APPn and COM markers in a list of these: */
+
+typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr;
+
+struct jpeg_marker_struct {
+  jpeg_saved_marker_ptr next;	/* next in list, or NULL */
+  UINT8 marker;			/* marker code: JPEG_COM, or JPEG_APP0+n */
+  unsigned int original_length;	/* # bytes of data in the file */
+  unsigned int data_length;	/* # bytes of data saved at data[] */
+  JOCTET FAR * data;		/* the data contained in the marker */
+  /* the marker length word is not counted in data_length or original_length */
+};
+
+/* Known color spaces. */
+
+typedef enum {
+	JCS_UNKNOWN,		/* error/unspecified */
+	JCS_GRAYSCALE,		/* monochrome */
+	JCS_RGB,		/* red/green/blue */
+	JCS_YCbCr,		/* Y/Cb/Cr (also known as YUV) */
+	JCS_CMYK,		/* C/M/Y/K */
+	JCS_YCCK		/* Y/Cb/Cr/K */
+} J_COLOR_SPACE;
+
+/* DCT/IDCT algorithm options. */
+
+typedef enum {
+	JDCT_ISLOW,		/* slow but accurate integer algorithm */
+	JDCT_IFAST,		/* faster, less accurate integer method */
+	JDCT_FLOAT		/* floating-point: accurate, fast on fast HW */
+} J_DCT_METHOD;
+
+#ifndef JDCT_DEFAULT		/* may be overridden in jconfig.h */
+#define JDCT_DEFAULT  JDCT_ISLOW
+#endif
+#ifndef JDCT_FASTEST		/* may be overridden in jconfig.h */
+#define JDCT_FASTEST  JDCT_IFAST
+#endif
+
+/* Dithering options for decompression. */
+
+typedef enum {
+	JDITHER_NONE,		/* no dithering */
+	JDITHER_ORDERED,	/* simple ordered dither */
+	JDITHER_FS		/* Floyd-Steinberg error diffusion dither */
+} J_DITHER_MODE;
+
+
+/* Common fields between JPEG compression and decompression master structs. */
+
+#define jpeg_common_fields \
+  struct jpeg_error_mgr * err;	/* Error handler module */\
+  struct jpeg_memory_mgr * mem;	/* Memory manager module */\
+  struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\
+  void * client_data;		/* Available for use by application */\
+  boolean is_decompressor;	/* So common code can tell which is which */\
+  int global_state		/* For checking call sequence validity */
+
+/* Routines that are to be used by both halves of the library are declared
+ * to receive a pointer to this structure.  There are no actual instances of
+ * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct.
+ */
+struct jpeg_common_struct {
+  jpeg_common_fields;		/* Fields common to both master struct types */
+  /* Additional fields follow in an actual jpeg_compress_struct or
+   * jpeg_decompress_struct.  All three structs must agree on these
+   * initial fields!  (This would be a lot cleaner in C++.)
+   */
+};
+
+typedef struct jpeg_common_struct * j_common_ptr;
+typedef struct jpeg_compress_struct * j_compress_ptr;
+typedef struct jpeg_decompress_struct * j_decompress_ptr;
+
+
+/* Master record for a compression instance */
+
+struct jpeg_compress_struct {
+  jpeg_common_fields;		/* Fields shared with jpeg_decompress_struct */
+
+  /* Destination for compressed data */
+  struct jpeg_destination_mgr * dest;
+
+  /* Description of source image --- these fields must be filled in by
+   * outer application before starting compression.  in_color_space must
+   * be correct before you can even call jpeg_set_defaults().
+   */
+
+  JDIMENSION image_width;	/* input image width */
+  JDIMENSION image_height;	/* input image height */
+  int input_components;		/* # of color components in input image */
+  J_COLOR_SPACE in_color_space;	/* colorspace of input image */
+
+  double input_gamma;		/* image gamma of input image */
+
+  /* Compression parameters --- these fields must be set before calling
+   * jpeg_start_compress().  We recommend calling jpeg_set_defaults() to
+   * initialize everything to reasonable defaults, then changing anything
+   * the application specifically wants to change.  That way you won't get
+   * burnt when new parameters are added.  Also note that there are several
+   * helper routines to simplify changing parameters.
+   */
+
+  unsigned int scale_num, scale_denom; /* fraction by which to scale image */
+
+  JDIMENSION jpeg_width;	/* scaled JPEG image width */
+  JDIMENSION jpeg_height;	/* scaled JPEG image height */
+  /* Dimensions of actual JPEG image that will be written to file,
+   * derived from input dimensions by scaling factors above.
+   * These fields are computed by jpeg_start_compress().
+   * You can also use jpeg_calc_jpeg_dimensions() to determine these values
+   * in advance of calling jpeg_start_compress().
+   */
+
+  int data_precision;		/* bits of precision in image data */
+
+  int num_components;		/* # of color components in JPEG image */
+  J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */
+
+  jpeg_component_info * comp_info;
+  /* comp_info[i] describes component that appears i'th in SOF */
+
+  JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS];
+  int q_scale_factor[NUM_QUANT_TBLS];
+  /* ptrs to coefficient quantization tables, or NULL if not defined,
+   * and corresponding scale factors (percentage, initialized 100).
+   */
+
+  JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS];
+  JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS];
+  /* ptrs to Huffman coding tables, or NULL if not defined */
+
+  UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */
+  UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */
+  UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */
+
+  int num_scans;		/* # of entries in scan_info array */
+  const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */
+  /* The default value of scan_info is NULL, which causes a single-scan
+   * sequential JPEG file to be emitted.  To create a multi-scan file,
+   * set num_scans and scan_info to point to an array of scan definitions.
+   */
+
+  boolean raw_data_in;		/* TRUE=caller supplies downsampled data */
+  boolean arith_code;		/* TRUE=arithmetic coding, FALSE=Huffman */
+  boolean optimize_coding;	/* TRUE=optimize entropy encoding parms */
+  boolean CCIR601_sampling;	/* TRUE=first samples are cosited */
+  boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */
+  int smoothing_factor;		/* 1..100, or 0 for no input smoothing */
+  J_DCT_METHOD dct_method;	/* DCT algorithm selector */
+
+  /* The restart interval can be specified in absolute MCUs by setting
+   * restart_interval, or in MCU rows by setting restart_in_rows
+   * (in which case the correct restart_interval will be figured
+   * for each scan).
+   */
+  unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */
+  int restart_in_rows;		/* if > 0, MCU rows per restart interval */
+
+  /* Parameters controlling emission of special markers. */
+
+  boolean write_JFIF_header;	/* should a JFIF marker be written? */
+  UINT8 JFIF_major_version;	/* What to write for the JFIF version number */
+  UINT8 JFIF_minor_version;
+  /* These three values are not used by the JPEG code, merely copied */
+  /* into the JFIF APP0 marker.  density_unit can be 0 for unknown, */
+  /* 1 for dots/inch, or 2 for dots/cm.  Note that the pixel aspect */
+  /* ratio is defined by X_density/Y_density even when density_unit=0. */
+  UINT8 density_unit;		/* JFIF code for pixel size units */
+  UINT16 X_density;		/* Horizontal pixel density */
+  UINT16 Y_density;		/* Vertical pixel density */
+  boolean write_Adobe_marker;	/* should an Adobe marker be written? */
+  
+  /* State variable: index of next scanline to be written to
+   * jpeg_write_scanlines().  Application may use this to control its
+   * processing loop, e.g., "while (next_scanline < image_height)".
+   */
+
+  JDIMENSION next_scanline;	/* 0 .. image_height-1  */
+
+  /* Remaining fields are known throughout compressor, but generally
+   * should not be touched by a surrounding application.
+   */
+
+  /*
+   * These fields are computed during compression startup
+   */
+  boolean progressive_mode;	/* TRUE if scan script uses progressive mode */
+  int max_h_samp_factor;	/* largest h_samp_factor */
+  int max_v_samp_factor;	/* largest v_samp_factor */
+
+  int min_DCT_h_scaled_size;	/* smallest DCT_h_scaled_size of any component */
+  int min_DCT_v_scaled_size;	/* smallest DCT_v_scaled_size of any component */
+
+  JDIMENSION total_iMCU_rows;	/* # of iMCU rows to be input to coef ctlr */
+  /* The coefficient controller receives data in units of MCU rows as defined
+   * for fully interleaved scans (whether the JPEG file is interleaved or not).
+   * There are v_samp_factor * DCTSIZE sample rows of each component in an
+   * "iMCU" (interleaved MCU) row.
+   */
+  
+  /*
+   * These fields are valid during any one scan.
+   * They describe the components and MCUs actually appearing in the scan.
+   */
+  int comps_in_scan;		/* # of JPEG components in this scan */
+  jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN];
+  /* *cur_comp_info[i] describes component that appears i'th in SOS */
+  
+  JDIMENSION MCUs_per_row;	/* # of MCUs across the image */
+  JDIMENSION MCU_rows_in_scan;	/* # of MCU rows in the image */
+  
+  int blocks_in_MCU;		/* # of DCT blocks per MCU */
+  int MCU_membership[C_MAX_BLOCKS_IN_MCU];
+  /* MCU_membership[i] is index in cur_comp_info of component owning */
+  /* i'th block in an MCU */
+
+  int Ss, Se, Ah, Al;		/* progressive JPEG parameters for scan */
+
+  int block_size;		/* the basic DCT block size: 1..16 */
+  const int * natural_order;	/* natural-order position array */
+  int lim_Se;			/* min( Se, DCTSIZE2-1 ) */
+
+  /*
+   * Links to compression subobjects (methods and private variables of modules)
+   */
+  struct jpeg_comp_master * master;
+  struct jpeg_c_main_controller * main;
+  struct jpeg_c_prep_controller * prep;
+  struct jpeg_c_coef_controller * coef;
+  struct jpeg_marker_writer * marker;
+  struct jpeg_color_converter * cconvert;
+  struct jpeg_downsampler * downsample;
+  struct jpeg_forward_dct * fdct;
+  struct jpeg_entropy_encoder * entropy;
+  jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */
+  int script_space_size;
+};
+
+
+/* Master record for a decompression instance */
+
+struct jpeg_decompress_struct {
+  jpeg_common_fields;		/* Fields shared with jpeg_compress_struct */
+
+  /* Source of compressed data */
+  struct jpeg_source_mgr * src;
+
+  /* Basic description of image --- filled in by jpeg_read_header(). */
+  /* Application may inspect these values to decide how to process image. */
+
+  JDIMENSION image_width;	/* nominal image width (from SOF marker) */
+  JDIMENSION image_height;	/* nominal image height */
+  int num_components;		/* # of color components in JPEG image */
+  J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */
+
+  /* Decompression processing parameters --- these fields must be set before
+   * calling jpeg_start_decompress().  Note that jpeg_read_header() initializes
+   * them to default values.
+   */
+
+  J_COLOR_SPACE out_color_space; /* colorspace for output */
+
+  unsigned int scale_num, scale_denom; /* fraction by which to scale image */
+
+  double output_gamma;		/* image gamma wanted in output */
+
+  boolean buffered_image;	/* TRUE=multiple output passes */
+  boolean raw_data_out;		/* TRUE=downsampled data wanted */
+
+  J_DCT_METHOD dct_method;	/* IDCT algorithm selector */
+  boolean do_fancy_upsampling;	/* TRUE=apply fancy upsampling */
+  boolean do_block_smoothing;	/* TRUE=apply interblock smoothing */
+
+  boolean quantize_colors;	/* TRUE=colormapped output wanted */
+  /* the following are ignored if not quantize_colors: */
+  J_DITHER_MODE dither_mode;	/* type of color dithering to use */
+  boolean two_pass_quantize;	/* TRUE=use two-pass color quantization */
+  int desired_number_of_colors;	/* max # colors to use in created colormap */
+  /* these are significant only in buffered-image mode: */
+  boolean enable_1pass_quant;	/* enable future use of 1-pass quantizer */
+  boolean enable_external_quant;/* enable future use of external colormap */
+  boolean enable_2pass_quant;	/* enable future use of 2-pass quantizer */
+
+  /* Description of actual output image that will be returned to application.
+   * These fields are computed by jpeg_start_decompress().
+   * You can also use jpeg_calc_output_dimensions() to determine these values
+   * in advance of calling jpeg_start_decompress().
+   */
+
+  JDIMENSION output_width;	/* scaled image width */
+  JDIMENSION output_height;	/* scaled image height */
+  int out_color_components;	/* # of color components in out_color_space */
+  int output_components;	/* # of color components returned */
+  /* output_components is 1 (a colormap index) when quantizing colors;
+   * otherwise it equals out_color_components.
+   */
+  int rec_outbuf_height;	/* min recommended height of scanline buffer */
+  /* If the buffer passed to jpeg_read_scanlines() is less than this many rows
+   * high, space and time will be wasted due to unnecessary data copying.
+   * Usually rec_outbuf_height will be 1 or 2, at most 4.
+   */
+
+  /* When quantizing colors, the output colormap is described by these fields.
+   * The application can supply a colormap by setting colormap non-NULL before
+   * calling jpeg_start_decompress; otherwise a colormap is created during
+   * jpeg_start_decompress or jpeg_start_output.
+   * The map has out_color_components rows and actual_number_of_colors columns.
+   */
+  int actual_number_of_colors;	/* number of entries in use */
+  JSAMPARRAY colormap;		/* The color map as a 2-D pixel array */
+
+  /* State variables: these variables indicate the progress of decompression.
+   * The application may examine these but must not modify them.
+   */
+
+  /* Row index of next scanline to be read from jpeg_read_scanlines().
+   * Application may use this to control its processing loop, e.g.,
+   * "while (output_scanline < output_height)".
+   */
+  JDIMENSION output_scanline;	/* 0 .. output_height-1  */
+
+  /* Current input scan number and number of iMCU rows completed in scan.
+   * These indicate the progress of the decompressor input side.
+   */
+  int input_scan_number;	/* Number of SOS markers seen so far */
+  JDIMENSION input_iMCU_row;	/* Number of iMCU rows completed */
+
+  /* The "output scan number" is the notional scan being displayed by the
+   * output side.  The decompressor will not allow output scan/row number
+   * to get ahead of input scan/row, but it can fall arbitrarily far behind.
+   */
+  int output_scan_number;	/* Nominal scan number being displayed */
+  JDIMENSION output_iMCU_row;	/* Number of iMCU rows read */
+
+  /* Current progression status.  coef_bits[c][i] indicates the precision
+   * with which component c's DCT coefficient i (in zigzag order) is known.
+   * It is -1 when no data has yet been received, otherwise it is the point
+   * transform (shift) value for the most recent scan of the coefficient
+   * (thus, 0 at completion of the progression).
+   * This pointer is NULL when reading a non-progressive file.
+   */
+  int (*coef_bits)[DCTSIZE2];	/* -1 or current Al value for each coef */
+
+  /* Internal JPEG parameters --- the application usually need not look at
+   * these fields.  Note that the decompressor output side may not use
+   * any parameters that can change between scans.
+   */
+
+  /* Quantization and Huffman tables are carried forward across input
+   * datastreams when processing abbreviated JPEG datastreams.
+   */
+
+  JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS];
+  /* ptrs to coefficient quantization tables, or NULL if not defined */
+
+  JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS];
+  JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS];
+  /* ptrs to Huffman coding tables, or NULL if not defined */
+
+  /* These parameters are never carried across datastreams, since they
+   * are given in SOF/SOS markers or defined to be reset by SOI.
+   */
+
+  int data_precision;		/* bits of precision in image data */
+
+  jpeg_component_info * comp_info;
+  /* comp_info[i] describes component that appears i'th in SOF */
+
+  boolean is_baseline;		/* TRUE if Baseline SOF0 encountered */
+  boolean progressive_mode;	/* TRUE if SOFn specifies progressive mode */
+  boolean arith_code;		/* TRUE=arithmetic coding, FALSE=Huffman */
+
+  UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */
+  UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */
+  UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */
+
+  unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */
+
+  /* These fields record data obtained from optional markers recognized by
+   * the JPEG library.
+   */
+  boolean saw_JFIF_marker;	/* TRUE iff a JFIF APP0 marker was found */
+  /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */
+  UINT8 JFIF_major_version;	/* JFIF version number */
+  UINT8 JFIF_minor_version;
+  UINT8 density_unit;		/* JFIF code for pixel size units */
+  UINT16 X_density;		/* Horizontal pixel density */
+  UINT16 Y_density;		/* Vertical pixel density */
+  boolean saw_Adobe_marker;	/* TRUE iff an Adobe APP14 marker was found */
+  UINT8 Adobe_transform;	/* Color transform code from Adobe marker */
+
+  boolean CCIR601_sampling;	/* TRUE=first samples are cosited */
+
+  /* Aside from the specific data retained from APPn markers known to the
+   * library, the uninterpreted contents of any or all APPn and COM markers
+   * can be saved in a list for examination by the application.
+   */
+  jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */
+
+  /* Remaining fields are known throughout decompressor, but generally
+   * should not be touched by a surrounding application.
+   */
+
+  /*
+   * These fields are computed during decompression startup
+   */
+  int max_h_samp_factor;	/* largest h_samp_factor */
+  int max_v_samp_factor;	/* largest v_samp_factor */
+
+  int min_DCT_h_scaled_size;	/* smallest DCT_h_scaled_size of any component */
+  int min_DCT_v_scaled_size;	/* smallest DCT_v_scaled_size of any component */
+
+  JDIMENSION total_iMCU_rows;	/* # of iMCU rows in image */
+  /* The coefficient controller's input and output progress is measured in
+   * units of "iMCU" (interleaved MCU) rows.  These are the same as MCU rows
+   * in fully interleaved JPEG scans, but are used whether the scan is
+   * interleaved or not.  We define an iMCU row as v_samp_factor DCT block
+   * rows of each component.  Therefore, the IDCT output contains
+   * v_samp_factor*DCT_v_scaled_size sample rows of a component per iMCU row.
+   */
+
+  JSAMPLE * sample_range_limit; /* table for fast range-limiting */
+
+  /*
+   * These fields are valid during any one scan.
+   * They describe the components and MCUs actually appearing in the scan.
+   * Note that the decompressor output side must not use these fields.
+   */
+  int comps_in_scan;		/* # of JPEG components in this scan */
+  jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN];
+  /* *cur_comp_info[i] describes component that appears i'th in SOS */
+
+  JDIMENSION MCUs_per_row;	/* # of MCUs across the image */
+  JDIMENSION MCU_rows_in_scan;	/* # of MCU rows in the image */
+
+  int blocks_in_MCU;		/* # of DCT blocks per MCU */
+  int MCU_membership[D_MAX_BLOCKS_IN_MCU];
+  /* MCU_membership[i] is index in cur_comp_info of component owning */
+  /* i'th block in an MCU */
+
+  int Ss, Se, Ah, Al;		/* progressive JPEG parameters for scan */
+
+  /* These fields are derived from Se of first SOS marker.
+   */
+  int block_size;		/* the basic DCT block size: 1..16 */
+  const int * natural_order; /* natural-order position array for entropy decode */
+  int lim_Se;			/* min( Se, DCTSIZE2-1 ) for entropy decode */
+
+  /* This field is shared between entropy decoder and marker parser.
+   * It is either zero or the code of a JPEG marker that has been
+   * read from the data source, but has not yet been processed.
+   */
+  int unread_marker;
+
+  /*
+   * Links to decompression subobjects (methods, private variables of modules)
+   */
+  struct jpeg_decomp_master * master;
+  struct jpeg_d_main_controller * main;
+  struct jpeg_d_coef_controller * coef;
+  struct jpeg_d_post_controller * post;
+  struct jpeg_input_controller * inputctl;
+  struct jpeg_marker_reader * marker;
+  struct jpeg_entropy_decoder * entropy;
+  struct jpeg_inverse_dct * idct;
+  struct jpeg_upsampler * upsample;
+  struct jpeg_color_deconverter * cconvert;
+  struct jpeg_color_quantizer * cquantize;
+};
+
+
+/* "Object" declarations for JPEG modules that may be supplied or called
+ * directly by the surrounding application.
+ * As with all objects in the JPEG library, these structs only define the
+ * publicly visible methods and state variables of a module.  Additional
+ * private fields may exist after the public ones.
+ */
+
+
+/* Error handler object */
+
+struct jpeg_error_mgr {
+  /* Error exit handler: does not return to caller */
+  JMETHOD(void, error_exit, (j_common_ptr cinfo));
+  /* Conditionally emit a trace or warning message */
+  JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level));
+  /* Routine that actually outputs a trace or error message */
+  JMETHOD(void, output_message, (j_common_ptr cinfo));
+  /* Format a message string for the most recent JPEG error or message */
+  JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer));
+#define JMSG_LENGTH_MAX  200	/* recommended size of format_message buffer */
+  /* Reset error state variables at start of a new image */
+  JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo));
+  
+  /* The message ID code and any parameters are saved here.
+   * A message can have one string parameter or up to 8 int parameters.
+   */
+  int msg_code;
+#define JMSG_STR_PARM_MAX  80
+  union {
+    int i[8];
+    char s[JMSG_STR_PARM_MAX];
+  } msg_parm;
+  
+  /* Standard state variables for error facility */
+  
+  int trace_level;		/* max msg_level that will be displayed */
+  
+  /* For recoverable corrupt-data errors, we emit a warning message,
+   * but keep going unless emit_message chooses to abort.  emit_message
+   * should count warnings in num_warnings.  The surrounding application
+   * can check for bad data by seeing if num_warnings is nonzero at the
+   * end of processing.
+   */
+  long num_warnings;		/* number of corrupt-data warnings */
+
+  /* These fields point to the table(s) of error message strings.
+   * An application can change the table pointer to switch to a different
+   * message list (typically, to change the language in which errors are
+   * reported).  Some applications may wish to add additional error codes
+   * that will be handled by the JPEG library error mechanism; the second
+   * table pointer is used for this purpose.
+   *
+   * First table includes all errors generated by JPEG library itself.
+   * Error code 0 is reserved for a "no such error string" message.
+   */
+  const char * const * jpeg_message_table; /* Library errors */
+  int last_jpeg_message;    /* Table contains strings 0..last_jpeg_message */
+  /* Second table can be added by application (see cjpeg/djpeg for example).
+   * It contains strings numbered first_addon_message..last_addon_message.
+   */
+  const char * const * addon_message_table; /* Non-library errors */
+  int first_addon_message;	/* code for first string in addon table */
+  int last_addon_message;	/* code for last string in addon table */
+};
+
+
+/* Progress monitor object */
+
+struct jpeg_progress_mgr {
+  JMETHOD(void, progress_monitor, (j_common_ptr cinfo));
+
+  long pass_counter;		/* work units completed in this pass */
+  long pass_limit;		/* total number of work units in this pass */
+  int completed_passes;		/* passes completed so far */
+  int total_passes;		/* total number of passes expected */
+};
+
+
+/* Data destination object for compression */
+
+struct jpeg_destination_mgr {
+  JOCTET * next_output_byte;	/* => next byte to write in buffer */
+  size_t free_in_buffer;	/* # of byte spaces remaining in buffer */
+
+  JMETHOD(void, init_destination, (j_compress_ptr cinfo));
+  JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo));
+  JMETHOD(void, term_destination, (j_compress_ptr cinfo));
+};
+
+
+/* Data source object for decompression */
+
+struct jpeg_source_mgr {
+  const JOCTET * next_input_byte; /* => next byte to read from buffer */
+  size_t bytes_in_buffer;	/* # of bytes remaining in buffer */
+
+  JMETHOD(void, init_source, (j_decompress_ptr cinfo));
+  JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo));
+  JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes));
+  JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired));
+  JMETHOD(void, term_source, (j_decompress_ptr cinfo));
+};
+
+
+/* Memory manager object.
+ * Allocates "small" objects (a few K total), "large" objects (tens of K),
+ * and "really big" objects (virtual arrays with backing store if needed).
+ * The memory manager does not allow individual objects to be freed; rather,
+ * each created object is assigned to a pool, and whole pools can be freed
+ * at once.  This is faster and more convenient than remembering exactly what
+ * to free, especially where malloc()/free() are not too speedy.
+ * NB: alloc routines never return NULL.  They exit to error_exit if not
+ * successful.
+ */
+
+#define JPOOL_PERMANENT	0	/* lasts until master record is destroyed */
+#define JPOOL_IMAGE	1	/* lasts until done with image/datastream */
+#define JPOOL_NUMPOOLS	2
+
+typedef struct jvirt_sarray_control * jvirt_sarray_ptr;
+typedef struct jvirt_barray_control * jvirt_barray_ptr;
+
+
+struct jpeg_memory_mgr {
+  /* Method pointers */
+  JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id,
+				size_t sizeofobject));
+  JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id,
+				     size_t sizeofobject));
+  JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id,
+				     JDIMENSION samplesperrow,
+				     JDIMENSION numrows));
+  JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id,
+				      JDIMENSION blocksperrow,
+				      JDIMENSION numrows));
+  JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo,
+						  int pool_id,
+						  boolean pre_zero,
+						  JDIMENSION samplesperrow,
+						  JDIMENSION numrows,
+						  JDIMENSION maxaccess));
+  JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo,
+						  int pool_id,
+						  boolean pre_zero,
+						  JDIMENSION blocksperrow,
+						  JDIMENSION numrows,
+						  JDIMENSION maxaccess));
+  JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo));
+  JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo,
+					   jvirt_sarray_ptr ptr,
+					   JDIMENSION start_row,
+					   JDIMENSION num_rows,
+					   boolean writable));
+  JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo,
+					    jvirt_barray_ptr ptr,
+					    JDIMENSION start_row,
+					    JDIMENSION num_rows,
+					    boolean writable));
+  JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id));
+  JMETHOD(void, self_destruct, (j_common_ptr cinfo));
+
+  /* Limit on memory allocation for this JPEG object.  (Note that this is
+   * merely advisory, not a guaranteed maximum; it only affects the space
+   * used for virtual-array buffers.)  May be changed by outer application
+   * after creating the JPEG object.
+   */
+  long max_memory_to_use;
+
+  /* Maximum allocation request accepted by alloc_large. */
+  long max_alloc_chunk;
+};
+
+
+/* Routine signature for application-supplied marker processing methods.
+ * Need not pass marker code since it is stored in cinfo->unread_marker.
+ */
+typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo));
+
+
+/* Declarations for routines called by application.
+ * The JPP macro hides prototype parameters from compilers that can't cope.
+ * Note JPP requires double parentheses.
+ */
+
+#ifdef HAVE_PROTOTYPES
+#define JPP(arglist)	arglist
+#else
+#define JPP(arglist)	()
+#endif
+
+
+/* Short forms of external names for systems with brain-damaged linkers.
+ * We shorten external names to be unique in the first six letters, which
+ * is good enough for all known systems.
+ * (If your compiler itself needs names to be unique in less than 15 
+ * characters, you are out of luck.  Get a better compiler.)
+ */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jpeg_std_error		jStdError
+#define jpeg_CreateCompress	jCreaCompress
+#define jpeg_CreateDecompress	jCreaDecompress
+#define jpeg_destroy_compress	jDestCompress
+#define jpeg_destroy_decompress	jDestDecompress
+#define jpeg_stdio_dest		jStdDest
+#define jpeg_stdio_src		jStdSrc
+#define jpeg_mem_dest		jMemDest
+#define jpeg_mem_src		jMemSrc
+#define jpeg_set_defaults	jSetDefaults
+#define jpeg_set_colorspace	jSetColorspace
+#define jpeg_default_colorspace	jDefColorspace
+#define jpeg_set_quality	jSetQuality
+#define jpeg_set_linear_quality	jSetLQuality
+#define jpeg_default_qtables	jDefQTables
+#define jpeg_add_quant_table	jAddQuantTable
+#define jpeg_quality_scaling	jQualityScaling
+#define jpeg_simple_progression	jSimProgress
+#define jpeg_suppress_tables	jSuppressTables
+#define jpeg_alloc_quant_table	jAlcQTable
+#define jpeg_alloc_huff_table	jAlcHTable
+#define jpeg_start_compress	jStrtCompress
+#define jpeg_write_scanlines	jWrtScanlines
+#define jpeg_finish_compress	jFinCompress
+#define jpeg_calc_jpeg_dimensions	jCjpegDimensions
+#define jpeg_write_raw_data	jWrtRawData
+#define jpeg_write_marker	jWrtMarker
+#define jpeg_write_m_header	jWrtMHeader
+#define jpeg_write_m_byte	jWrtMByte
+#define jpeg_write_tables	jWrtTables
+#define jpeg_read_header	jReadHeader
+#define jpeg_start_decompress	jStrtDecompress
+#define jpeg_read_scanlines	jReadScanlines
+#define jpeg_finish_decompress	jFinDecompress
+#define jpeg_read_raw_data	jReadRawData
+#define jpeg_has_multiple_scans	jHasMultScn
+#define jpeg_start_output	jStrtOutput
+#define jpeg_finish_output	jFinOutput
+#define jpeg_input_complete	jInComplete
+#define jpeg_new_colormap	jNewCMap
+#define jpeg_consume_input	jConsumeInput
+#define jpeg_core_output_dimensions	jCoreDimensions
+#define jpeg_calc_output_dimensions	jCalcDimensions
+#define jpeg_save_markers	jSaveMarkers
+#define jpeg_set_marker_processor	jSetMarker
+#define jpeg_read_coefficients	jReadCoefs
+#define jpeg_write_coefficients	jWrtCoefs
+#define jpeg_copy_critical_parameters	jCopyCrit
+#define jpeg_abort_compress	jAbrtCompress
+#define jpeg_abort_decompress	jAbrtDecompress
+#define jpeg_abort		jAbort
+#define jpeg_destroy		jDestroy
+#define jpeg_resync_to_restart	jResyncRestart
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+
+/* Default error-management setup */
+EXTERN(struct jpeg_error_mgr *) jpeg_std_error
+	JPP((struct jpeg_error_mgr * err));
+
+/* Initialization of JPEG compression objects.
+ * jpeg_create_compress() and jpeg_create_decompress() are the exported
+ * names that applications should call.  These expand to calls on
+ * jpeg_CreateCompress and jpeg_CreateDecompress with additional information
+ * passed for version mismatch checking.
+ * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx.
+ */
+#define jpeg_create_compress(cinfo) \
+    jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \
+			(size_t) sizeof(struct jpeg_compress_struct))
+#define jpeg_create_decompress(cinfo) \
+    jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \
+			  (size_t) sizeof(struct jpeg_decompress_struct))
+EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo,
+				      int version, size_t structsize));
+EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo,
+					int version, size_t structsize));
+/* Destruction of JPEG compression objects */
+EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo));
+EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo));
+
+/* Standard data source and destination managers: stdio streams. */
+/* Caller is responsible for opening the file before and closing after. */
+EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile));
+EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile));
+
+/* Data source and destination managers: memory buffers. */
+EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo,
+			       unsigned char ** outbuffer,
+			       unsigned long * outsize));
+EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo,
+			      unsigned char * inbuffer,
+			      unsigned long insize));
+
+/* Default parameter setup for compression */
+EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo));
+/* Compression parameter setup aids */
+EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo,
+				      J_COLOR_SPACE colorspace));
+EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo));
+EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality,
+				   boolean force_baseline));
+EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo,
+					  int scale_factor,
+					  boolean force_baseline));
+EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo,
+				       boolean force_baseline));
+EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl,
+				       const unsigned int *basic_table,
+				       int scale_factor,
+				       boolean force_baseline));
+EXTERN(int) jpeg_quality_scaling JPP((int quality));
+EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo));
+EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo,
+				       boolean suppress));
+EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo));
+EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo));
+
+/* Main entry points for compression */
+EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo,
+				      boolean write_all_tables));
+EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo,
+					     JSAMPARRAY scanlines,
+					     JDIMENSION num_lines));
+EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo));
+
+/* Precalculate JPEG dimensions for current compression parameters. */
+EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo));
+
+/* Replaces jpeg_write_scanlines when writing raw downsampled data. */
+EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo,
+					    JSAMPIMAGE data,
+					    JDIMENSION num_lines));
+
+/* Write a special marker.  See libjpeg.txt concerning safe usage. */
+EXTERN(void) jpeg_write_marker
+	JPP((j_compress_ptr cinfo, int marker,
+	     const JOCTET * dataptr, unsigned int datalen));
+/* Same, but piecemeal. */
+EXTERN(void) jpeg_write_m_header
+	JPP((j_compress_ptr cinfo, int marker, unsigned int datalen));
+EXTERN(void) jpeg_write_m_byte
+	JPP((j_compress_ptr cinfo, int val));
+
+/* Alternate compression function: just write an abbreviated table file */
+EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo));
+
+/* Decompression startup: read start of JPEG datastream to see what's there */
+EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo,
+				  boolean require_image));
+/* Return value is one of: */
+#define JPEG_SUSPENDED		0 /* Suspended due to lack of input data */
+#define JPEG_HEADER_OK		1 /* Found valid image datastream */
+#define JPEG_HEADER_TABLES_ONLY	2 /* Found valid table-specs-only datastream */
+/* If you pass require_image = TRUE (normal case), you need not check for
+ * a TABLES_ONLY return code; an abbreviated file will cause an error exit.
+ * JPEG_SUSPENDED is only possible if you use a data source module that can
+ * give a suspension return (the stdio source module doesn't).
+ */
+
+/* Main entry points for decompression */
+EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo));
+EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo,
+					    JSAMPARRAY scanlines,
+					    JDIMENSION max_lines));
+EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo));
+
+/* Replaces jpeg_read_scanlines when reading raw downsampled data. */
+EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo,
+					   JSAMPIMAGE data,
+					   JDIMENSION max_lines));
+
+/* Additional entry points for buffered-image mode. */
+EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo));
+EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo,
+				       int scan_number));
+EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo));
+EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo));
+EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo));
+EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo));
+/* Return value is one of: */
+/* #define JPEG_SUSPENDED	0    Suspended due to lack of input data */
+#define JPEG_REACHED_SOS	1 /* Reached start of new scan */
+#define JPEG_REACHED_EOI	2 /* Reached end of image */
+#define JPEG_ROW_COMPLETED	3 /* Completed one iMCU row */
+#define JPEG_SCAN_COMPLETED	4 /* Completed last iMCU row of a scan */
+
+/* Precalculate output dimensions for current decompression parameters. */
+EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo));
+EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo));
+
+/* Control saving of COM and APPn markers into marker_list. */
+EXTERN(void) jpeg_save_markers
+	JPP((j_decompress_ptr cinfo, int marker_code,
+	     unsigned int length_limit));
+
+/* Install a special processing method for COM or APPn markers. */
+EXTERN(void) jpeg_set_marker_processor
+	JPP((j_decompress_ptr cinfo, int marker_code,
+	     jpeg_marker_parser_method routine));
+
+/* Read or write raw DCT coefficients --- useful for lossless transcoding. */
+EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo));
+EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo,
+					  jvirt_barray_ptr * coef_arrays));
+EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo,
+						j_compress_ptr dstinfo));
+
+/* If you choose to abort compression or decompression before completing
+ * jpeg_finish_(de)compress, then you need to clean up to release memory,
+ * temporary files, etc.  You can just call jpeg_destroy_(de)compress
+ * if you're done with the JPEG object, but if you want to clean it up and
+ * reuse it, call this:
+ */
+EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo));
+EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo));
+
+/* Generic versions of jpeg_abort and jpeg_destroy that work on either
+ * flavor of JPEG object.  These may be more convenient in some places.
+ */
+EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo));
+EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo));
+
+/* Default restart-marker-resync procedure for use by data source modules */
+EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo,
+					    int desired));
+
+
+/* These marker codes are exported since applications and data source modules
+ * are likely to want to use them.
+ */
+
+#define JPEG_RST0	0xD0	/* RST0 marker code */
+#define JPEG_EOI	0xD9	/* EOI marker code */
+#define JPEG_APP0	0xE0	/* APP0 marker code */
+#define JPEG_COM	0xFE	/* COM marker code */
+
+
+/* If we have a brain-damaged compiler that emits warnings (or worse, errors)
+ * for structure definitions that are never filled in, keep it quiet by
+ * supplying dummy definitions for the various substructures.
+ */
+
+#ifdef INCOMPLETE_TYPES_BROKEN
+#ifndef JPEG_INTERNALS		/* will be defined in jpegint.h */
+struct jvirt_sarray_control { long dummy; };
+struct jvirt_barray_control { long dummy; };
+struct jpeg_comp_master { long dummy; };
+struct jpeg_c_main_controller { long dummy; };
+struct jpeg_c_prep_controller { long dummy; };
+struct jpeg_c_coef_controller { long dummy; };
+struct jpeg_marker_writer { long dummy; };
+struct jpeg_color_converter { long dummy; };
+struct jpeg_downsampler { long dummy; };
+struct jpeg_forward_dct { long dummy; };
+struct jpeg_entropy_encoder { long dummy; };
+struct jpeg_decomp_master { long dummy; };
+struct jpeg_d_main_controller { long dummy; };
+struct jpeg_d_coef_controller { long dummy; };
+struct jpeg_d_post_controller { long dummy; };
+struct jpeg_input_controller { long dummy; };
+struct jpeg_marker_reader { long dummy; };
+struct jpeg_entropy_decoder { long dummy; };
+struct jpeg_inverse_dct { long dummy; };
+struct jpeg_upsampler { long dummy; };
+struct jpeg_color_deconverter { long dummy; };
+struct jpeg_color_quantizer { long dummy; };
+#endif /* JPEG_INTERNALS */
+#endif /* INCOMPLETE_TYPES_BROKEN */
+
+
+/*
+ * The JPEG library modules define JPEG_INTERNALS before including this file.
+ * The internal structure declarations are read only when that is true.
+ * Applications using the library should not include jpegint.h, but may wish
+ * to include jerror.h.
+ */
+
+#ifdef JPEG_INTERNALS
+#include "jpegint.h"		/* fetch private declarations */
+#include "jerror.h"		/* fetch error codes too */
+#endif
+
+#ifdef __cplusplus
+#ifndef DONT_USE_EXTERN_C
+}
+#endif
+#endif
+
+#endif /* JPEGLIB_H */
diff --git a/jpeg-8d/jpegtran.1 b/jpeg-8d/jpegtran.1
new file mode 100644
index 0000000..0ad1bbc
--- /dev/null
+++ b/jpeg-8d/jpegtran.1
@@ -0,0 +1,285 @@
+.TH JPEGTRAN 1 "28 December 2009"
+.SH NAME
+jpegtran \- lossless transformation of JPEG files
+.SH SYNOPSIS
+.B jpegtran
+[
+.I options
+]
+[
+.I filename
+]
+.LP
+.SH DESCRIPTION
+.LP
+.B jpegtran
+performs various useful transformations of JPEG files.
+It can translate the coded representation from one variant of JPEG to another,
+for example from baseline JPEG to progressive JPEG or vice versa.  It can also
+perform some rearrangements of the image data, for example turning an image
+from landscape to portrait format by rotation.
+.PP
+.B jpegtran
+works by rearranging the compressed data (DCT coefficients), without
+ever fully decoding the image.  Therefore, its transformations are lossless:
+there is no image degradation at all, which would not be true if you used
+.B djpeg
+followed by
+.B cjpeg
+to accomplish the same conversion.  But by the same token,
+.B jpegtran
+cannot perform lossy operations such as changing the image quality.
+.PP
+.B jpegtran
+reads the named JPEG/JFIF file, or the standard input if no file is
+named, and produces a JPEG/JFIF file on the standard output.
+.SH OPTIONS
+All switch names may be abbreviated; for example,
+.B \-optimize
+may be written
+.B \-opt
+or
+.BR \-o .
+Upper and lower case are equivalent.
+British spellings are also accepted (e.g.,
+.BR \-optimise ),
+though for brevity these are not mentioned below.
+.PP
+To specify the coded JPEG representation used in the output file,
+.B jpegtran
+accepts a subset of the switches recognized by
+.BR cjpeg :
+.TP
+.B \-optimize
+Perform optimization of entropy encoding parameters.
+.TP
+.B \-progressive
+Create progressive JPEG file.
+.TP
+.BI \-restart " N"
+Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
+attached to the number.
+.TP
+.B \-arithmetic
+Use arithmetic coding.
+.TP
+.BI \-scans " file"
+Use the scan script given in the specified text file.
+.PP
+See
+.BR cjpeg (1)
+for more details about these switches.
+If you specify none of these switches, you get a plain baseline-JPEG output
+file.  The quality setting and so forth are determined by the input file.
+.PP
+The image can be losslessly transformed by giving one of these switches:
+.TP
+.B \-flip horizontal
+Mirror image horizontally (left-right).
+.TP
+.B \-flip vertical
+Mirror image vertically (top-bottom).
+.TP
+.B \-rotate 90
+Rotate image 90 degrees clockwise.
+.TP
+.B \-rotate 180
+Rotate image 180 degrees.
+.TP
+.B \-rotate 270
+Rotate image 270 degrees clockwise (or 90 ccw).
+.TP
+.B \-transpose
+Transpose image (across UL-to-LR axis).
+.TP
+.B \-transverse
+Transverse transpose (across UR-to-LL axis).
+.IP
+The transpose transformation has no restrictions regarding image dimensions.
+The other transformations operate rather oddly if the image dimensions are not
+a multiple of the iMCU size (usually 8 or 16 pixels), because they can only
+transform complete blocks of DCT coefficient data in the desired way.
+.IP
+.BR jpegtran 's
+default behavior when transforming an odd-size image is designed
+to preserve exact reversibility and mathematical consistency of the
+transformation set.  As stated, transpose is able to flip the entire image
+area.  Horizontal mirroring leaves any partial iMCU column at the right edge
+untouched, but is able to flip all rows of the image.  Similarly, vertical
+mirroring leaves any partial iMCU row at the bottom edge untouched, but is
+able to flip all columns.  The other transforms can be built up as sequences
+of transpose and flip operations; for consistency, their actions on edge
+pixels are defined to be the same as the end result of the corresponding
+transpose-and-flip sequence.
+.IP
+For practical use, you may prefer to discard any untransformable edge pixels
+rather than having a strange-looking strip along the right and/or bottom edges
+of a transformed image.  To do this, add the
+.B \-trim
+switch:
+.TP
+.B \-trim
+Drop non-transformable edge blocks.
+.IP
+Obviously, a transformation with
+.B \-trim
+is not reversible, so strictly speaking
+.B jpegtran
+with this switch is not lossless.  Also, the expected mathematical
+equivalences between the transformations no longer hold.  For example,
+.B \-rot 270 -trim
+trims only the bottom edge, but
+.B \-rot 90 -trim
+followed by
+.B \-rot 180 -trim
+trims both edges.
+.IP
+If you are only interested in perfect transformation, add the
+.B \-perfect
+switch:
+.TP
+.B \-perfect
+Fails with an error if the transformation is not perfect.
+.IP
+For example you may want to do
+.IP
+.B (jpegtran \-rot 90 -perfect
+.I foo.jpg
+.B || djpeg
+.I foo.jpg
+.B | pnmflip \-r90 | cjpeg)
+.IP
+to do a perfect rotation if available or an approximated one if not.
+.PP
+We also offer a lossless-crop option, which discards data outside a given
+image region but losslessly preserves what is inside.  Like the rotate and
+flip transforms, lossless crop is restricted by the current JPEG format: the
+upper left corner of the selected region must fall on an iMCU boundary.  If
+this does not hold for the given crop parameters, we silently move the upper
+left corner up and/or left to make it so, simultaneously increasing the region
+dimensions to keep the lower right crop corner unchanged.  (Thus, the output
+image covers at least the requested region, but may cover more.)
+
+The image can be losslessly cropped by giving the switch:
+.TP
+.B \-crop WxH+X+Y
+Crop to a rectangular subarea of width W, height H starting at point X,Y.
+.PP
+Other not-strictly-lossless transformation switches are:
+.TP
+.B \-grayscale
+Force grayscale output.
+.IP
+This option discards the chrominance channels if the input image is YCbCr
+(ie, a standard color JPEG), resulting in a grayscale JPEG file.  The
+luminance channel is preserved exactly, so this is a better method of reducing
+to grayscale than decompression, conversion, and recompression.  This switch
+is particularly handy for fixing a monochrome picture that was mistakenly
+encoded as a color JPEG.  (In such a case, the space savings from getting rid
+of the near-empty chroma channels won't be large; but the decoding time for
+a grayscale JPEG is substantially less than that for a color JPEG.)
+.TP
+.BI \-scale " M/N"
+Scale the output image by a factor M/N.
+.IP
+Currently supported scale factors are M/N with all M from 1 to 16, where N is
+the source DCT size, which is 8 for baseline JPEG.  If the /N part is omitted,
+then M specifies the DCT scaled size to be applied on the given input.  For
+baseline JPEG this is equivalent to M/8 scaling, since the source DCT size
+for baseline JPEG is 8.
+.B Caution:
+An implementation of the JPEG SmartScale extension is required for this
+feature.  SmartScale enabled JPEG is not yet widely implemented, so many
+decoders will be unable to view a SmartScale extended JPEG file at all.
+.PP
+.B jpegtran
+also recognizes these switches that control what to do with "extra" markers,
+such as comment blocks:
+.TP
+.B \-copy none
+Copy no extra markers from source file.  This setting suppresses all
+comments and other excess baggage present in the source file.
+.TP
+.B \-copy comments
+Copy only comment markers.  This setting copies comments from the source file,
+but discards any other inessential (for image display) data.
+.TP
+.B \-copy all
+Copy all extra markers.  This setting preserves miscellaneous markers
+found in the source file, such as JFIF thumbnails, Exif data, and Photoshop
+settings.  In some files these extra markers can be sizable.
+.IP
+The default behavior is
+.BR "\-copy comments" .
+(Note: in IJG releases v6 and v6a,
+.B jpegtran
+always did the equivalent of
+.BR "\-copy none" .)
+.PP
+Additional switches recognized by jpegtran are:
+.TP
+.BI \-maxmemory " N"
+Set limit for amount of memory to use in processing large images.  Value is
+in thousands of bytes, or millions of bytes if "M" is attached to the
+number.  For example,
+.B \-max 4m
+selects 4000000 bytes.  If more space is needed, temporary files will be used.
+.TP
+.BI \-outfile " name"
+Send output image to the named file, not to standard output.
+.TP
+.B \-verbose
+Enable debug printout.  More
+.BR \-v 's
+give more output.  Also, version information is printed at startup.
+.TP
+.B \-debug
+Same as
+.BR \-verbose .
+.SH EXAMPLES
+.LP
+This example converts a baseline JPEG file to progressive form:
+.IP
+.B jpegtran \-progressive
+.I foo.jpg
+.B >
+.I fooprog.jpg
+.PP
+This example rotates an image 90 degrees clockwise, discarding any
+unrotatable edge pixels:
+.IP
+.B jpegtran \-rot 90 -trim
+.I foo.jpg
+.B >
+.I foo90.jpg
+.SH ENVIRONMENT
+.TP
+.B JPEGMEM
+If this environment variable is set, its value is the default memory limit.
+The value is specified as described for the
+.B \-maxmemory
+switch.
+.B JPEGMEM
+overrides the default value specified when the program was compiled, and
+itself is overridden by an explicit
+.BR \-maxmemory .
+.SH SEE ALSO
+.BR cjpeg (1),
+.BR djpeg (1),
+.BR rdjpgcom (1),
+.BR wrjpgcom (1)
+.br
+Wallace, Gregory K.  "The JPEG Still Picture Compression Standard",
+Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
+.SH AUTHOR
+Independent JPEG Group
+.SH BUGS
+The transform options can't transform odd-size images perfectly.  Use
+.B \-trim
+or
+.B \-perfect
+if you don't like the results.
+.PP
+The entire image is read into memory and then written out again, even in
+cases where this isn't really necessary.  Expect swapping on large images,
+especially when using the more complex transform options.
diff --git a/jpeg-8d/jpegtran.c b/jpeg-8d/jpegtran.c
new file mode 100644
index 0000000..e539e91
--- /dev/null
+++ b/jpeg-8d/jpegtran.c
@@ -0,0 +1,560 @@
+/*
+ * jpegtran.c
+ *
+ * Copyright (C) 1995-2011, Thomas G. Lane, Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a command-line user interface for JPEG transcoding.
+ * It is very similar to cjpeg.c, and partly to djpeg.c, but provides
+ * lossless transcoding between different JPEG file formats.  It also
+ * provides some lossless and sort-of-lossless transformations of JPEG data.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include "transupp.h"		/* Support routines for jpegtran */
+#include "jversion.h"		/* for version message */
+
+#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
+#ifdef __MWERKS__
+#include <SIOUX.h>              /* Metrowerks needs this */
+#include <console.h>		/* ... and this */
+#endif
+#ifdef THINK_C
+#include <console.h>		/* Think declares it here */
+#endif
+#endif
+
+
+/*
+ * Argument-parsing code.
+ * The switch parser is designed to be useful with DOS-style command line
+ * syntax, ie, intermixed switches and file names, where only the switches
+ * to the left of a given file name affect processing of that file.
+ * The main program in this file doesn't actually use this capability...
+ */
+
+
+static const char * progname;	/* program name for error messages */
+static char * outfilename;	/* for -outfile switch */
+static char * scaleoption;	/* -scale switch */
+static JCOPY_OPTION copyoption;	/* -copy switch */
+static jpeg_transform_info transformoption; /* image transformation options */
+
+
+LOCAL(void)
+usage (void)
+/* complain about bad command line */
+{
+  fprintf(stderr, "usage: %s [switches] ", progname);
+#ifdef TWO_FILE_COMMANDLINE
+  fprintf(stderr, "inputfile outputfile\n");
+#else
+  fprintf(stderr, "[inputfile]\n");
+#endif
+
+  fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -copy none     Copy no extra markers from source file\n");
+  fprintf(stderr, "  -copy comments Copy only comment markers (default)\n");
+  fprintf(stderr, "  -copy all      Copy all extra markers\n");
+#ifdef ENTROPY_OPT_SUPPORTED
+  fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
+#endif
+#ifdef C_PROGRESSIVE_SUPPORTED
+  fprintf(stderr, "  -progressive   Create progressive JPEG file\n");
+#endif
+  fprintf(stderr, "Switches for modifying the image:\n");
+#if TRANSFORMS_SUPPORTED
+  fprintf(stderr, "  -crop WxH+X+Y  Crop to a rectangular subarea\n");
+  fprintf(stderr, "  -grayscale     Reduce to grayscale (omit color data)\n");
+  fprintf(stderr, "  -flip [horizontal|vertical]  Mirror image (left-right or top-bottom)\n");
+  fprintf(stderr, "  -perfect       Fail if there is non-transformable edge blocks\n");
+  fprintf(stderr, "  -rotate [90|180|270]         Rotate image (degrees clockwise)\n");
+#endif
+  fprintf(stderr, "  -scale M/N     Scale output image by fraction M/N, eg, 1/8\n");
+#if TRANSFORMS_SUPPORTED
+  fprintf(stderr, "  -transpose     Transpose image\n");
+  fprintf(stderr, "  -transverse    Transverse transpose image\n");
+  fprintf(stderr, "  -trim          Drop non-transformable edge blocks\n");
+#endif
+  fprintf(stderr, "Switches for advanced users:\n");
+#ifdef C_ARITH_CODING_SUPPORTED
+  fprintf(stderr, "  -arithmetic    Use arithmetic coding\n");
+#endif
+  fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
+  fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
+  fprintf(stderr, "  -outfile name  Specify name for output file\n");
+  fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
+  fprintf(stderr, "Switches for wizards:\n");
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+  fprintf(stderr, "  -scans file    Create multi-scan JPEG per script file\n");
+#endif
+  exit(EXIT_FAILURE);
+}
+
+
+LOCAL(void)
+select_transform (JXFORM_CODE transform)
+/* Silly little routine to detect multiple transform options,
+ * which we can't handle.
+ */
+{
+#if TRANSFORMS_SUPPORTED
+  if (transformoption.transform == JXFORM_NONE ||
+      transformoption.transform == transform) {
+    transformoption.transform = transform;
+  } else {
+    fprintf(stderr, "%s: can only do one image transformation at a time\n",
+	    progname);
+    usage();
+  }
+#else
+  fprintf(stderr, "%s: sorry, image transformation was not compiled\n",
+	  progname);
+  exit(EXIT_FAILURE);
+#endif
+}
+
+
+LOCAL(int)
+parse_switches (j_compress_ptr cinfo, int argc, char **argv,
+		int last_file_arg_seen, boolean for_real)
+/* Parse optional switches.
+ * Returns argv[] index of first file-name argument (== argc if none).
+ * Any file names with indexes <= last_file_arg_seen are ignored;
+ * they have presumably been processed in a previous iteration.
+ * (Pass 0 for last_file_arg_seen on the first or only iteration.)
+ * for_real is FALSE on the first (dummy) pass; we may skip any expensive
+ * processing.
+ */
+{
+  int argn;
+  char * arg;
+  boolean simple_progressive;
+  char * scansarg = NULL;	/* saves -scans parm if any */
+
+  /* Set up default JPEG parameters. */
+  simple_progressive = FALSE;
+  outfilename = NULL;
+  scaleoption = NULL;
+  copyoption = JCOPYOPT_DEFAULT;
+  transformoption.transform = JXFORM_NONE;
+  transformoption.perfect = FALSE;
+  transformoption.trim = FALSE;
+  transformoption.force_grayscale = FALSE;
+  transformoption.crop = FALSE;
+  cinfo->err->trace_level = 0;
+
+  /* Scan command line options, adjust parameters */
+
+  for (argn = 1; argn < argc; argn++) {
+    arg = argv[argn];
+    if (*arg != '-') {
+      /* Not a switch, must be a file name argument */
+      if (argn <= last_file_arg_seen) {
+	outfilename = NULL;	/* -outfile applies to just one input file */
+	continue;		/* ignore this name if previously processed */
+      }
+      break;			/* else done parsing switches */
+    }
+    arg++;			/* advance past switch marker character */
+
+    if (keymatch(arg, "arithmetic", 1)) {
+      /* Use arithmetic coding. */
+#ifdef C_ARITH_CODING_SUPPORTED
+      cinfo->arith_code = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, arithmetic coding not supported\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "copy", 2)) {
+      /* Select which extra markers to copy. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "none", 1)) {
+	copyoption = JCOPYOPT_NONE;
+      } else if (keymatch(argv[argn], "comments", 1)) {
+	copyoption = JCOPYOPT_COMMENTS;
+      } else if (keymatch(argv[argn], "all", 1)) {
+	copyoption = JCOPYOPT_ALL;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "crop", 2)) {
+      /* Perform lossless cropping. */
+#if TRANSFORMS_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (! jtransform_parse_crop_spec(&transformoption, argv[argn])) {
+	fprintf(stderr, "%s: bogus -crop argument '%s'\n",
+		progname, argv[argn]);
+	exit(EXIT_FAILURE);
+      }
+#else
+      select_transform(JXFORM_NONE);	/* force an error */
+#endif
+
+    } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
+      /* Enable debug printouts. */
+      /* On first -d, print version identification */
+      static boolean printed_version = FALSE;
+
+      if (! printed_version) {
+	fprintf(stderr, "Independent JPEG Group's JPEGTRAN, version %s\n%s\n",
+		JVERSION, JCOPYRIGHT);
+	printed_version = TRUE;
+      }
+      cinfo->err->trace_level++;
+
+    } else if (keymatch(arg, "flip", 1)) {
+      /* Mirror left-right or top-bottom. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "horizontal", 1))
+	select_transform(JXFORM_FLIP_H);
+      else if (keymatch(argv[argn], "vertical", 1))
+	select_transform(JXFORM_FLIP_V);
+      else
+	usage();
+
+    } else if (keymatch(arg, "grayscale", 1) || keymatch(arg, "greyscale",1)) {
+      /* Force to grayscale. */
+#if TRANSFORMS_SUPPORTED
+      transformoption.force_grayscale = TRUE;
+#else
+      select_transform(JXFORM_NONE);	/* force an error */
+#endif
+
+    } else if (keymatch(arg, "maxmemory", 3)) {
+      /* Maximum memory in Kb (or Mb with 'm'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (ch == 'm' || ch == 'M')
+	lval *= 1000L;
+      cinfo->mem->max_memory_to_use = lval * 1000L;
+
+    } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
+      /* Enable entropy parm optimization. */
+#ifdef ENTROPY_OPT_SUPPORTED
+      cinfo->optimize_coding = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "outfile", 4)) {
+      /* Set output file name. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      outfilename = argv[argn];	/* save it away for later use */
+
+    } else if (keymatch(arg, "perfect", 2)) {
+      /* Fail if there is any partial edge MCUs that the transform can't
+       * handle. */
+      transformoption.perfect = TRUE;
+
+    } else if (keymatch(arg, "progressive", 2)) {
+      /* Select simple progressive mode. */
+#ifdef C_PROGRESSIVE_SUPPORTED
+      simple_progressive = TRUE;
+      /* We must postpone execution until num_components is known. */
+#else
+      fprintf(stderr, "%s: sorry, progressive output was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "restart", 1)) {
+      /* Restart interval in MCU rows (or in MCUs with 'b'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (lval < 0 || lval > 65535L)
+	usage();
+      if (ch == 'b' || ch == 'B') {
+	cinfo->restart_interval = (unsigned int) lval;
+	cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
+      } else {
+	cinfo->restart_in_rows = (int) lval;
+	/* restart_interval will be computed during startup */
+      }
+
+    } else if (keymatch(arg, "rotate", 2)) {
+      /* Rotate 90, 180, or 270 degrees (measured clockwise). */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "90", 2))
+	select_transform(JXFORM_ROT_90);
+      else if (keymatch(argv[argn], "180", 3))
+	select_transform(JXFORM_ROT_180);
+      else if (keymatch(argv[argn], "270", 3))
+	select_transform(JXFORM_ROT_270);
+      else
+	usage();
+
+    } else if (keymatch(arg, "scale", 4)) {
+      /* Scale the output image by a fraction M/N. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      scaleoption = argv[argn];
+      /* We must postpone processing until decompression startup. */
+
+    } else if (keymatch(arg, "scans", 1)) {
+      /* Set scan script. */
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      scansarg = argv[argn];
+      /* We must postpone reading the file in case -progressive appears. */
+#else
+      fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "transpose", 1)) {
+      /* Transpose (across UL-to-LR axis). */
+      select_transform(JXFORM_TRANSPOSE);
+
+    } else if (keymatch(arg, "transverse", 6)) {
+      /* Transverse transpose (across UR-to-LL axis). */
+      select_transform(JXFORM_TRANSVERSE);
+
+    } else if (keymatch(arg, "trim", 3)) {
+      /* Trim off any partial edge MCUs that the transform can't handle. */
+      transformoption.trim = TRUE;
+
+    } else {
+      usage();			/* bogus switch */
+    }
+  }
+
+  /* Post-switch-scanning cleanup */
+
+  if (for_real) {
+
+#ifdef C_PROGRESSIVE_SUPPORTED
+    if (simple_progressive)	/* process -progressive; -scans can override */
+      jpeg_simple_progression(cinfo);
+#endif
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+    if (scansarg != NULL)	/* process -scans if it was present */
+      if (! read_scan_script(cinfo, scansarg))
+	usage();
+#endif
+  }
+
+  return argn;			/* return index of next arg (file name) */
+}
+
+
+/*
+ * The main program.
+ */
+
+int
+main (int argc, char **argv)
+{
+  struct jpeg_decompress_struct srcinfo;
+  struct jpeg_compress_struct dstinfo;
+  struct jpeg_error_mgr jsrcerr, jdsterr;
+#ifdef PROGRESS_REPORT
+  struct cdjpeg_progress_mgr progress;
+#endif
+  jvirt_barray_ptr * src_coef_arrays;
+  jvirt_barray_ptr * dst_coef_arrays;
+  int file_index;
+  /* We assume all-in-memory processing and can therefore use only a
+   * single file pointer for sequential input and output operation. 
+   */
+  FILE * fp;
+
+  /* On Mac, fetch a command line. */
+#ifdef USE_CCOMMAND
+  argc = ccommand(&argv);
+#endif
+
+  progname = argv[0];
+  if (progname == NULL || progname[0] == 0)
+    progname = "jpegtran";	/* in case C library doesn't provide it */
+
+  /* Initialize the JPEG decompression object with default error handling. */
+  srcinfo.err = jpeg_std_error(&jsrcerr);
+  jpeg_create_decompress(&srcinfo);
+  /* Initialize the JPEG compression object with default error handling. */
+  dstinfo.err = jpeg_std_error(&jdsterr);
+  jpeg_create_compress(&dstinfo);
+
+  /* Now safe to enable signal catcher.
+   * Note: we assume only the decompression object will have virtual arrays.
+   */
+#ifdef NEED_SIGNAL_CATCHER
+  enable_signal_catcher((j_common_ptr) &srcinfo);
+#endif
+
+  /* Scan command line to find file names.
+   * It is convenient to use just one switch-parsing routine, but the switch
+   * values read here are mostly ignored; we will rescan the switches after
+   * opening the input file.  Also note that most of the switches affect the
+   * destination JPEG object, so we parse into that and then copy over what
+   * needs to affects the source too.
+   */
+
+  file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE);
+  jsrcerr.trace_level = jdsterr.trace_level;
+  srcinfo.mem->max_memory_to_use = dstinfo.mem->max_memory_to_use;
+
+#ifdef TWO_FILE_COMMANDLINE
+  /* Must have either -outfile switch or explicit output file name */
+  if (outfilename == NULL) {
+    if (file_index != argc-2) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+    outfilename = argv[file_index+1];
+  } else {
+    if (file_index != argc-1) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+  }
+#else
+  /* Unix style: expect zero or one file name */
+  if (file_index < argc-1) {
+    fprintf(stderr, "%s: only one input file\n", progname);
+    usage();
+  }
+#endif /* TWO_FILE_COMMANDLINE */
+
+  /* Open the input file. */
+  if (file_index < argc) {
+    if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s for reading\n", progname, argv[file_index]);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default input file is stdin */
+    fp = read_stdin();
+  }
+
+#ifdef PROGRESS_REPORT
+  start_progress_monitor((j_common_ptr) &dstinfo, &progress);
+#endif
+
+  /* Specify data source for decompression */
+  jpeg_stdio_src(&srcinfo, fp);
+
+  /* Enable saving of extra markers that we want to copy */
+  jcopy_markers_setup(&srcinfo, copyoption);
+
+  /* Read file header */
+  (void) jpeg_read_header(&srcinfo, TRUE);
+
+  /* Adjust default decompression parameters */
+  if (scaleoption != NULL)
+    if (sscanf(scaleoption, "%d/%d",
+	&srcinfo.scale_num, &srcinfo.scale_denom) < 1)
+      usage();
+
+  /* Any space needed by a transform option must be requested before
+   * jpeg_read_coefficients so that memory allocation will be done right.
+   */
+#if TRANSFORMS_SUPPORTED
+  /* Fail right away if -perfect is given and transformation is not perfect.
+   */
+  if (!jtransform_request_workspace(&srcinfo, &transformoption)) {
+    fprintf(stderr, "%s: transformation is not perfect\n", progname);
+    exit(EXIT_FAILURE);
+  }
+#endif
+
+  /* Read source file as DCT coefficients */
+  src_coef_arrays = jpeg_read_coefficients(&srcinfo);
+
+  /* Initialize destination compression parameters from source values */
+  jpeg_copy_critical_parameters(&srcinfo, &dstinfo);
+
+  /* Adjust destination parameters if required by transform options;
+   * also find out which set of coefficient arrays will hold the output.
+   */
+#if TRANSFORMS_SUPPORTED
+  dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo,
+						 src_coef_arrays,
+						 &transformoption);
+#else
+  dst_coef_arrays = src_coef_arrays;
+#endif
+
+  /* Close input file, if we opened it.
+   * Note: we assume that jpeg_read_coefficients consumed all input
+   * until JPEG_REACHED_EOI, and that jpeg_finish_decompress will
+   * only consume more while (! cinfo->inputctl->eoi_reached).
+   * We cannot call jpeg_finish_decompress here since we still need the
+   * virtual arrays allocated from the source object for processing.
+   */
+  if (fp != stdin)
+    fclose(fp);
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s for writing\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+    fp = write_stdout();
+  }
+
+  /* Adjust default compression parameters by re-parsing the options */
+  file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
+
+  /* Specify data destination for compression */
+  jpeg_stdio_dest(&dstinfo, fp);
+
+  /* Start compressor (note no image data is actually written here) */
+  jpeg_write_coefficients(&dstinfo, dst_coef_arrays);
+
+  /* Copy to the output file any extra markers that we want to preserve */
+  jcopy_markers_execute(&srcinfo, &dstinfo, copyoption);
+
+  /* Execute image transformation, if any */
+#if TRANSFORMS_SUPPORTED
+  jtransform_execute_transformation(&srcinfo, &dstinfo,
+				    src_coef_arrays,
+				    &transformoption);
+#endif
+
+  /* Finish compression and release memory */
+  jpeg_finish_compress(&dstinfo);
+  jpeg_destroy_compress(&dstinfo);
+  (void) jpeg_finish_decompress(&srcinfo);
+  jpeg_destroy_decompress(&srcinfo);
+
+  /* Close output file, if we opened it */
+  if (fp != stdout)
+    fclose(fp);
+
+#ifdef PROGRESS_REPORT
+  end_progress_monitor((j_common_ptr) &dstinfo);
+#endif
+
+  /* All done. */
+  exit(jsrcerr.num_warnings + jdsterr.num_warnings ?EXIT_WARNING:EXIT_SUCCESS);
+  return 0;			/* suppress no-return-value warnings */
+}
diff --git a/jpeg-8d/jquant1.c b/jpeg-8d/jquant1.c
new file mode 100644
index 0000000..9d11f70
--- /dev/null
+++ b/jpeg-8d/jquant1.c
@@ -0,0 +1,857 @@
+/*
+ * jquant1.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains 1-pass color quantization (color mapping) routines.
+ * These routines provide mapping to a fixed color map using equally spaced
+ * color values.  Optional Floyd-Steinberg or ordered dithering is available.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+#ifdef QUANT_1PASS_SUPPORTED
+
+
+/*
+ * The main purpose of 1-pass quantization is to provide a fast, if not very
+ * high quality, colormapped output capability.  A 2-pass quantizer usually
+ * gives better visual quality; however, for quantized grayscale output this
+ * quantizer is perfectly adequate.  Dithering is highly recommended with this
+ * quantizer, though you can turn it off if you really want to.
+ *
+ * In 1-pass quantization the colormap must be chosen in advance of seeing the
+ * image.  We use a map consisting of all combinations of Ncolors[i] color
+ * values for the i'th component.  The Ncolors[] values are chosen so that
+ * their product, the total number of colors, is no more than that requested.
+ * (In most cases, the product will be somewhat less.)
+ *
+ * Since the colormap is orthogonal, the representative value for each color
+ * component can be determined without considering the other components;
+ * then these indexes can be combined into a colormap index by a standard
+ * N-dimensional-array-subscript calculation.  Most of the arithmetic involved
+ * can be precalculated and stored in the lookup table colorindex[].
+ * colorindex[i][j] maps pixel value j in component i to the nearest
+ * representative value (grid plane) for that component; this index is
+ * multiplied by the array stride for component i, so that the
+ * index of the colormap entry closest to a given pixel value is just
+ *    sum( colorindex[component-number][pixel-component-value] )
+ * Aside from being fast, this scheme allows for variable spacing between
+ * representative values with no additional lookup cost.
+ *
+ * If gamma correction has been applied in color conversion, it might be wise
+ * to adjust the color grid spacing so that the representative colors are
+ * equidistant in linear space.  At this writing, gamma correction is not
+ * implemented by jdcolor, so nothing is done here.
+ */
+
+
+/* Declarations for ordered dithering.
+ *
+ * We use a standard 16x16 ordered dither array.  The basic concept of ordered
+ * dithering is described in many references, for instance Dale Schumacher's
+ * chapter II.2 of Graphics Gems II (James Arvo, ed. Academic Press, 1991).
+ * In place of Schumacher's comparisons against a "threshold" value, we add a
+ * "dither" value to the input pixel and then round the result to the nearest
+ * output value.  The dither value is equivalent to (0.5 - threshold) times
+ * the distance between output values.  For ordered dithering, we assume that
+ * the output colors are equally spaced; if not, results will probably be
+ * worse, since the dither may be too much or too little at a given point.
+ *
+ * The normal calculation would be to form pixel value + dither, range-limit
+ * this to 0..MAXJSAMPLE, and then index into the colorindex table as usual.
+ * We can skip the separate range-limiting step by extending the colorindex
+ * table in both directions.
+ */
+
+#define ODITHER_SIZE  16	/* dimension of dither matrix */
+/* NB: if ODITHER_SIZE is not a power of 2, ODITHER_MASK uses will break */
+#define ODITHER_CELLS (ODITHER_SIZE*ODITHER_SIZE)	/* # cells in matrix */
+#define ODITHER_MASK  (ODITHER_SIZE-1) /* mask for wrapping around counters */
+
+typedef int ODITHER_MATRIX[ODITHER_SIZE][ODITHER_SIZE];
+typedef int (*ODITHER_MATRIX_PTR)[ODITHER_SIZE];
+
+static const UINT8 base_dither_matrix[ODITHER_SIZE][ODITHER_SIZE] = {
+  /* Bayer's order-4 dither array.  Generated by the code given in
+   * Stephen Hawley's article "Ordered Dithering" in Graphics Gems I.
+   * The values in this array must range from 0 to ODITHER_CELLS-1.
+   */
+  {   0,192, 48,240, 12,204, 60,252,  3,195, 51,243, 15,207, 63,255 },
+  { 128, 64,176,112,140, 76,188,124,131, 67,179,115,143, 79,191,127 },
+  {  32,224, 16,208, 44,236, 28,220, 35,227, 19,211, 47,239, 31,223 },
+  { 160, 96,144, 80,172,108,156, 92,163, 99,147, 83,175,111,159, 95 },
+  {   8,200, 56,248,  4,196, 52,244, 11,203, 59,251,  7,199, 55,247 },
+  { 136, 72,184,120,132, 68,180,116,139, 75,187,123,135, 71,183,119 },
+  {  40,232, 24,216, 36,228, 20,212, 43,235, 27,219, 39,231, 23,215 },
+  { 168,104,152, 88,164,100,148, 84,171,107,155, 91,167,103,151, 87 },
+  {   2,194, 50,242, 14,206, 62,254,  1,193, 49,241, 13,205, 61,253 },
+  { 130, 66,178,114,142, 78,190,126,129, 65,177,113,141, 77,189,125 },
+  {  34,226, 18,210, 46,238, 30,222, 33,225, 17,209, 45,237, 29,221 },
+  { 162, 98,146, 82,174,110,158, 94,161, 97,145, 81,173,109,157, 93 },
+  {  10,202, 58,250,  6,198, 54,246,  9,201, 57,249,  5,197, 53,245 },
+  { 138, 74,186,122,134, 70,182,118,137, 73,185,121,133, 69,181,117 },
+  {  42,234, 26,218, 38,230, 22,214, 41,233, 25,217, 37,229, 21,213 },
+  { 170,106,154, 90,166,102,150, 86,169,105,153, 89,165,101,149, 85 }
+};
+
+
+/* Declarations for Floyd-Steinberg dithering.
+ *
+ * Errors are accumulated into the array fserrors[], at a resolution of
+ * 1/16th of a pixel count.  The error at a given pixel is propagated
+ * to its not-yet-processed neighbors using the standard F-S fractions,
+ *		...	(here)	7/16
+ *		3/16	5/16	1/16
+ * We work left-to-right on even rows, right-to-left on odd rows.
+ *
+ * We can get away with a single array (holding one row's worth of errors)
+ * by using it to store the current row's errors at pixel columns not yet
+ * processed, but the next row's errors at columns already processed.  We
+ * need only a few extra variables to hold the errors immediately around the
+ * current column.  (If we are lucky, those variables are in registers, but
+ * even if not, they're probably cheaper to access than array elements are.)
+ *
+ * The fserrors[] array is indexed [component#][position].
+ * We provide (#columns + 2) entries per component; the extra entry at each
+ * end saves us from special-casing the first and last pixels.
+ *
+ * Note: on a wide image, we might not have enough room in a PC's near data
+ * segment to hold the error array; so it is allocated with alloc_large.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+typedef INT16 FSERROR;		/* 16 bits should be enough */
+typedef int LOCFSERROR;		/* use 'int' for calculation temps */
+#else
+typedef INT32 FSERROR;		/* may need more than 16 bits */
+typedef INT32 LOCFSERROR;	/* be sure calculation temps are big enough */
+#endif
+
+typedef FSERROR FAR *FSERRPTR;	/* pointer to error array (in FAR storage!) */
+
+
+/* Private subobject */
+
+#define MAX_Q_COMPS 4		/* max components I can handle */
+
+typedef struct {
+  struct jpeg_color_quantizer pub; /* public fields */
+
+  /* Initially allocated colormap is saved here */
+  JSAMPARRAY sv_colormap;	/* The color map as a 2-D pixel array */
+  int sv_actual;		/* number of entries in use */
+
+  JSAMPARRAY colorindex;	/* Precomputed mapping for speed */
+  /* colorindex[i][j] = index of color closest to pixel value j in component i,
+   * premultiplied as described above.  Since colormap indexes must fit into
+   * JSAMPLEs, the entries of this array will too.
+   */
+  boolean is_padded;		/* is the colorindex padded for odither? */
+
+  int Ncolors[MAX_Q_COMPS];	/* # of values alloced to each component */
+
+  /* Variables for ordered dithering */
+  int row_index;		/* cur row's vertical index in dither matrix */
+  ODITHER_MATRIX_PTR odither[MAX_Q_COMPS]; /* one dither array per component */
+
+  /* Variables for Floyd-Steinberg dithering */
+  FSERRPTR fserrors[MAX_Q_COMPS]; /* accumulated errors */
+  boolean on_odd_row;		/* flag to remember which row we are on */
+} my_cquantizer;
+
+typedef my_cquantizer * my_cquantize_ptr;
+
+
+/*
+ * Policy-making subroutines for create_colormap and create_colorindex.
+ * These routines determine the colormap to be used.  The rest of the module
+ * only assumes that the colormap is orthogonal.
+ *
+ *  * select_ncolors decides how to divvy up the available colors
+ *    among the components.
+ *  * output_value defines the set of representative values for a component.
+ *  * largest_input_value defines the mapping from input values to
+ *    representative values for a component.
+ * Note that the latter two routines may impose different policies for
+ * different components, though this is not currently done.
+ */
+
+
+LOCAL(int)
+select_ncolors (j_decompress_ptr cinfo, int Ncolors[])
+/* Determine allocation of desired colors to components, */
+/* and fill in Ncolors[] array to indicate choice. */
+/* Return value is total number of colors (product of Ncolors[] values). */
+{
+  int nc = cinfo->out_color_components; /* number of color components */
+  int max_colors = cinfo->desired_number_of_colors;
+  int total_colors, iroot, i, j;
+  boolean changed;
+  long temp;
+  static const int RGB_order[3] = { RGB_GREEN, RGB_RED, RGB_BLUE };
+
+  /* We can allocate at least the nc'th root of max_colors per component. */
+  /* Compute floor(nc'th root of max_colors). */
+  iroot = 1;
+  do {
+    iroot++;
+    temp = iroot;		/* set temp = iroot ** nc */
+    for (i = 1; i < nc; i++)
+      temp *= iroot;
+  } while (temp <= (long) max_colors); /* repeat till iroot exceeds root */
+  iroot--;			/* now iroot = floor(root) */
+
+  /* Must have at least 2 color values per component */
+  if (iroot < 2)
+    ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, (int) temp);
+
+  /* Initialize to iroot color values for each component */
+  total_colors = 1;
+  for (i = 0; i < nc; i++) {
+    Ncolors[i] = iroot;
+    total_colors *= iroot;
+  }
+  /* We may be able to increment the count for one or more components without
+   * exceeding max_colors, though we know not all can be incremented.
+   * Sometimes, the first component can be incremented more than once!
+   * (Example: for 16 colors, we start at 2*2*2, go to 3*2*2, then 4*2*2.)
+   * In RGB colorspace, try to increment G first, then R, then B.
+   */
+  do {
+    changed = FALSE;
+    for (i = 0; i < nc; i++) {
+      j = (cinfo->out_color_space == JCS_RGB ? RGB_order[i] : i);
+      /* calculate new total_colors if Ncolors[j] is incremented */
+      temp = total_colors / Ncolors[j];
+      temp *= Ncolors[j]+1;	/* done in long arith to avoid oflo */
+      if (temp > (long) max_colors)
+	break;			/* won't fit, done with this pass */
+      Ncolors[j]++;		/* OK, apply the increment */
+      total_colors = (int) temp;
+      changed = TRUE;
+    }
+  } while (changed);
+
+  return total_colors;
+}
+
+
+LOCAL(int)
+output_value (j_decompress_ptr cinfo, int ci, int j, int maxj)
+/* Return j'th output value, where j will range from 0 to maxj */
+/* The output values must fall in 0..MAXJSAMPLE in increasing order */
+{
+  /* We always provide values 0 and MAXJSAMPLE for each component;
+   * any additional values are equally spaced between these limits.
+   * (Forcing the upper and lower values to the limits ensures that
+   * dithering can't produce a color outside the selected gamut.)
+   */
+  return (int) (((INT32) j * MAXJSAMPLE + maxj/2) / maxj);
+}
+
+
+LOCAL(int)
+largest_input_value (j_decompress_ptr cinfo, int ci, int j, int maxj)
+/* Return largest input value that should map to j'th output value */
+/* Must have largest(j=0) >= 0, and largest(j=maxj) >= MAXJSAMPLE */
+{
+  /* Breakpoints are halfway between values returned by output_value */
+  return (int) (((INT32) (2*j + 1) * MAXJSAMPLE + maxj) / (2*maxj));
+}
+
+
+/*
+ * Create the colormap.
+ */
+
+LOCAL(void)
+create_colormap (j_decompress_ptr cinfo)
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  JSAMPARRAY colormap;		/* Created colormap */
+  int total_colors;		/* Number of distinct output colors */
+  int i,j,k, nci, blksize, blkdist, ptr, val;
+
+  /* Select number of colors for each component */
+  total_colors = select_ncolors(cinfo, cquantize->Ncolors);
+
+  /* Report selected color counts */
+  if (cinfo->out_color_components == 3)
+    TRACEMS4(cinfo, 1, JTRC_QUANT_3_NCOLORS,
+	     total_colors, cquantize->Ncolors[0],
+	     cquantize->Ncolors[1], cquantize->Ncolors[2]);
+  else
+    TRACEMS1(cinfo, 1, JTRC_QUANT_NCOLORS, total_colors);
+
+  /* Allocate and fill in the colormap. */
+  /* The colors are ordered in the map in standard row-major order, */
+  /* i.e. rightmost (highest-indexed) color changes most rapidly. */
+
+  colormap = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE,
+     (JDIMENSION) total_colors, (JDIMENSION) cinfo->out_color_components);
+
+  /* blksize is number of adjacent repeated entries for a component */
+  /* blkdist is distance between groups of identical entries for a component */
+  blkdist = total_colors;
+
+  for (i = 0; i < cinfo->out_color_components; i++) {
+    /* fill in colormap entries for i'th color component */
+    nci = cquantize->Ncolors[i]; /* # of distinct values for this color */
+    blksize = blkdist / nci;
+    for (j = 0; j < nci; j++) {
+      /* Compute j'th output value (out of nci) for component */
+      val = output_value(cinfo, i, j, nci-1);
+      /* Fill in all colormap entries that have this value of this component */
+      for (ptr = j * blksize; ptr < total_colors; ptr += blkdist) {
+	/* fill in blksize entries beginning at ptr */
+	for (k = 0; k < blksize; k++)
+	  colormap[i][ptr+k] = (JSAMPLE) val;
+      }
+    }
+    blkdist = blksize;		/* blksize of this color is blkdist of next */
+  }
+
+  /* Save the colormap in private storage,
+   * where it will survive color quantization mode changes.
+   */
+  cquantize->sv_colormap = colormap;
+  cquantize->sv_actual = total_colors;
+}
+
+
+/*
+ * Create the color index table.
+ */
+
+LOCAL(void)
+create_colorindex (j_decompress_ptr cinfo)
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  JSAMPROW indexptr;
+  int i,j,k, nci, blksize, val, pad;
+
+  /* For ordered dither, we pad the color index tables by MAXJSAMPLE in
+   * each direction (input index values can be -MAXJSAMPLE .. 2*MAXJSAMPLE).
+   * This is not necessary in the other dithering modes.  However, we
+   * flag whether it was done in case user changes dithering mode.
+   */
+  if (cinfo->dither_mode == JDITHER_ORDERED) {
+    pad = MAXJSAMPLE*2;
+    cquantize->is_padded = TRUE;
+  } else {
+    pad = 0;
+    cquantize->is_padded = FALSE;
+  }
+
+  cquantize->colorindex = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE,
+     (JDIMENSION) (MAXJSAMPLE+1 + pad),
+     (JDIMENSION) cinfo->out_color_components);
+
+  /* blksize is number of adjacent repeated entries for a component */
+  blksize = cquantize->sv_actual;
+
+  for (i = 0; i < cinfo->out_color_components; i++) {
+    /* fill in colorindex entries for i'th color component */
+    nci = cquantize->Ncolors[i]; /* # of distinct values for this color */
+    blksize = blksize / nci;
+
+    /* adjust colorindex pointers to provide padding at negative indexes. */
+    if (pad)
+      cquantize->colorindex[i] += MAXJSAMPLE;
+
+    /* in loop, val = index of current output value, */
+    /* and k = largest j that maps to current val */
+    indexptr = cquantize->colorindex[i];
+    val = 0;
+    k = largest_input_value(cinfo, i, 0, nci-1);
+    for (j = 0; j <= MAXJSAMPLE; j++) {
+      while (j > k)		/* advance val if past boundary */
+	k = largest_input_value(cinfo, i, ++val, nci-1);
+      /* premultiply so that no multiplication needed in main processing */
+      indexptr[j] = (JSAMPLE) (val * blksize);
+    }
+    /* Pad at both ends if necessary */
+    if (pad)
+      for (j = 1; j <= MAXJSAMPLE; j++) {
+	indexptr[-j] = indexptr[0];
+	indexptr[MAXJSAMPLE+j] = indexptr[MAXJSAMPLE];
+      }
+  }
+}
+
+
+/*
+ * Create an ordered-dither array for a component having ncolors
+ * distinct output values.
+ */
+
+LOCAL(ODITHER_MATRIX_PTR)
+make_odither_array (j_decompress_ptr cinfo, int ncolors)
+{
+  ODITHER_MATRIX_PTR odither;
+  int j,k;
+  INT32 num,den;
+
+  odither = (ODITHER_MATRIX_PTR)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(ODITHER_MATRIX));
+  /* The inter-value distance for this color is MAXJSAMPLE/(ncolors-1).
+   * Hence the dither value for the matrix cell with fill order f
+   * (f=0..N-1) should be (N-1-2*f)/(2*N) * MAXJSAMPLE/(ncolors-1).
+   * On 16-bit-int machine, be careful to avoid overflow.
+   */
+  den = 2 * ODITHER_CELLS * ((INT32) (ncolors - 1));
+  for (j = 0; j < ODITHER_SIZE; j++) {
+    for (k = 0; k < ODITHER_SIZE; k++) {
+      num = ((INT32) (ODITHER_CELLS-1 - 2*((int)base_dither_matrix[j][k])))
+	    * MAXJSAMPLE;
+      /* Ensure round towards zero despite C's lack of consistency
+       * about rounding negative values in integer division...
+       */
+      odither[j][k] = (int) (num<0 ? -((-num)/den) : num/den);
+    }
+  }
+  return odither;
+}
+
+
+/*
+ * Create the ordered-dither tables.
+ * Components having the same number of representative colors may 
+ * share a dither table.
+ */
+
+LOCAL(void)
+create_odither_tables (j_decompress_ptr cinfo)
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  ODITHER_MATRIX_PTR odither;
+  int i, j, nci;
+
+  for (i = 0; i < cinfo->out_color_components; i++) {
+    nci = cquantize->Ncolors[i]; /* # of distinct values for this color */
+    odither = NULL;		/* search for matching prior component */
+    for (j = 0; j < i; j++) {
+      if (nci == cquantize->Ncolors[j]) {
+	odither = cquantize->odither[j];
+	break;
+      }
+    }
+    if (odither == NULL)	/* need a new table? */
+      odither = make_odither_array(cinfo, nci);
+    cquantize->odither[i] = odither;
+  }
+}
+
+
+/*
+ * Map some rows of pixels to the output colormapped representation.
+ */
+
+METHODDEF(void)
+color_quantize (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
+		JSAMPARRAY output_buf, int num_rows)
+/* General case, no dithering */
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  JSAMPARRAY colorindex = cquantize->colorindex;
+  register int pixcode, ci;
+  register JSAMPROW ptrin, ptrout;
+  int row;
+  JDIMENSION col;
+  JDIMENSION width = cinfo->output_width;
+  register int nc = cinfo->out_color_components;
+
+  for (row = 0; row < num_rows; row++) {
+    ptrin = input_buf[row];
+    ptrout = output_buf[row];
+    for (col = width; col > 0; col--) {
+      pixcode = 0;
+      for (ci = 0; ci < nc; ci++) {
+	pixcode += GETJSAMPLE(colorindex[ci][GETJSAMPLE(*ptrin++)]);
+      }
+      *ptrout++ = (JSAMPLE) pixcode;
+    }
+  }
+}
+
+
+METHODDEF(void)
+color_quantize3 (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
+		 JSAMPARRAY output_buf, int num_rows)
+/* Fast path for out_color_components==3, no dithering */
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  register int pixcode;
+  register JSAMPROW ptrin, ptrout;
+  JSAMPROW colorindex0 = cquantize->colorindex[0];
+  JSAMPROW colorindex1 = cquantize->colorindex[1];
+  JSAMPROW colorindex2 = cquantize->colorindex[2];
+  int row;
+  JDIMENSION col;
+  JDIMENSION width = cinfo->output_width;
+
+  for (row = 0; row < num_rows; row++) {
+    ptrin = input_buf[row];
+    ptrout = output_buf[row];
+    for (col = width; col > 0; col--) {
+      pixcode  = GETJSAMPLE(colorindex0[GETJSAMPLE(*ptrin++)]);
+      pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*ptrin++)]);
+      pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*ptrin++)]);
+      *ptrout++ = (JSAMPLE) pixcode;
+    }
+  }
+}
+
+
+METHODDEF(void)
+quantize_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
+		     JSAMPARRAY output_buf, int num_rows)
+/* General case, with ordered dithering */
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  register JSAMPROW input_ptr;
+  register JSAMPROW output_ptr;
+  JSAMPROW colorindex_ci;
+  int * dither;			/* points to active row of dither matrix */
+  int row_index, col_index;	/* current indexes into dither matrix */
+  int nc = cinfo->out_color_components;
+  int ci;
+  int row;
+  JDIMENSION col;
+  JDIMENSION width = cinfo->output_width;
+
+  for (row = 0; row < num_rows; row++) {
+    /* Initialize output values to 0 so can process components separately */
+    FMEMZERO((void FAR *) output_buf[row],
+	     (size_t) (width * SIZEOF(JSAMPLE)));
+    row_index = cquantize->row_index;
+    for (ci = 0; ci < nc; ci++) {
+      input_ptr = input_buf[row] + ci;
+      output_ptr = output_buf[row];
+      colorindex_ci = cquantize->colorindex[ci];
+      dither = cquantize->odither[ci][row_index];
+      col_index = 0;
+
+      for (col = width; col > 0; col--) {
+	/* Form pixel value + dither, range-limit to 0..MAXJSAMPLE,
+	 * select output value, accumulate into output code for this pixel.
+	 * Range-limiting need not be done explicitly, as we have extended
+	 * the colorindex table to produce the right answers for out-of-range
+	 * inputs.  The maximum dither is +- MAXJSAMPLE; this sets the
+	 * required amount of padding.
+	 */
+	*output_ptr += colorindex_ci[GETJSAMPLE(*input_ptr)+dither[col_index]];
+	input_ptr += nc;
+	output_ptr++;
+	col_index = (col_index + 1) & ODITHER_MASK;
+      }
+    }
+    /* Advance row index for next row */
+    row_index = (row_index + 1) & ODITHER_MASK;
+    cquantize->row_index = row_index;
+  }
+}
+
+
+METHODDEF(void)
+quantize3_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
+		      JSAMPARRAY output_buf, int num_rows)
+/* Fast path for out_color_components==3, with ordered dithering */
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  register int pixcode;
+  register JSAMPROW input_ptr;
+  register JSAMPROW output_ptr;
+  JSAMPROW colorindex0 = cquantize->colorindex[0];
+  JSAMPROW colorindex1 = cquantize->colorindex[1];
+  JSAMPROW colorindex2 = cquantize->colorindex[2];
+  int * dither0;		/* points to active row of dither matrix */
+  int * dither1;
+  int * dither2;
+  int row_index, col_index;	/* current indexes into dither matrix */
+  int row;
+  JDIMENSION col;
+  JDIMENSION width = cinfo->output_width;
+
+  for (row = 0; row < num_rows; row++) {
+    row_index = cquantize->row_index;
+    input_ptr = input_buf[row];
+    output_ptr = output_buf[row];
+    dither0 = cquantize->odither[0][row_index];
+    dither1 = cquantize->odither[1][row_index];
+    dither2 = cquantize->odither[2][row_index];
+    col_index = 0;
+
+    for (col = width; col > 0; col--) {
+      pixcode  = GETJSAMPLE(colorindex0[GETJSAMPLE(*input_ptr++) +
+					dither0[col_index]]);
+      pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*input_ptr++) +
+					dither1[col_index]]);
+      pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*input_ptr++) +
+					dither2[col_index]]);
+      *output_ptr++ = (JSAMPLE) pixcode;
+      col_index = (col_index + 1) & ODITHER_MASK;
+    }
+    row_index = (row_index + 1) & ODITHER_MASK;
+    cquantize->row_index = row_index;
+  }
+}
+
+
+METHODDEF(void)
+quantize_fs_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
+		    JSAMPARRAY output_buf, int num_rows)
+/* General case, with Floyd-Steinberg dithering */
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  register LOCFSERROR cur;	/* current error or pixel value */
+  LOCFSERROR belowerr;		/* error for pixel below cur */
+  LOCFSERROR bpreverr;		/* error for below/prev col */
+  LOCFSERROR bnexterr;		/* error for below/next col */
+  LOCFSERROR delta;
+  register FSERRPTR errorptr;	/* => fserrors[] at column before current */
+  register JSAMPROW input_ptr;
+  register JSAMPROW output_ptr;
+  JSAMPROW colorindex_ci;
+  JSAMPROW colormap_ci;
+  int pixcode;
+  int nc = cinfo->out_color_components;
+  int dir;			/* 1 for left-to-right, -1 for right-to-left */
+  int dirnc;			/* dir * nc */
+  int ci;
+  int row;
+  JDIMENSION col;
+  JDIMENSION width = cinfo->output_width;
+  JSAMPLE *range_limit = cinfo->sample_range_limit;
+  SHIFT_TEMPS
+
+  for (row = 0; row < num_rows; row++) {
+    /* Initialize output values to 0 so can process components separately */
+    FMEMZERO((void FAR *) output_buf[row],
+	     (size_t) (width * SIZEOF(JSAMPLE)));
+    for (ci = 0; ci < nc; ci++) {
+      input_ptr = input_buf[row] + ci;
+      output_ptr = output_buf[row];
+      if (cquantize->on_odd_row) {
+	/* work right to left in this row */
+	input_ptr += (width-1) * nc; /* so point to rightmost pixel */
+	output_ptr += width-1;
+	dir = -1;
+	dirnc = -nc;
+	errorptr = cquantize->fserrors[ci] + (width+1); /* => entry after last column */
+      } else {
+	/* work left to right in this row */
+	dir = 1;
+	dirnc = nc;
+	errorptr = cquantize->fserrors[ci]; /* => entry before first column */
+      }
+      colorindex_ci = cquantize->colorindex[ci];
+      colormap_ci = cquantize->sv_colormap[ci];
+      /* Preset error values: no error propagated to first pixel from left */
+      cur = 0;
+      /* and no error propagated to row below yet */
+      belowerr = bpreverr = 0;
+
+      for (col = width; col > 0; col--) {
+	/* cur holds the error propagated from the previous pixel on the
+	 * current line.  Add the error propagated from the previous line
+	 * to form the complete error correction term for this pixel, and
+	 * round the error term (which is expressed * 16) to an integer.
+	 * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct
+	 * for either sign of the error value.
+	 * Note: errorptr points to *previous* column's array entry.
+	 */
+	cur = RIGHT_SHIFT(cur + errorptr[dir] + 8, 4);
+	/* Form pixel value + error, and range-limit to 0..MAXJSAMPLE.
+	 * The maximum error is +- MAXJSAMPLE; this sets the required size
+	 * of the range_limit array.
+	 */
+	cur += GETJSAMPLE(*input_ptr);
+	cur = GETJSAMPLE(range_limit[cur]);
+	/* Select output value, accumulate into output code for this pixel */
+	pixcode = GETJSAMPLE(colorindex_ci[cur]);
+	*output_ptr += (JSAMPLE) pixcode;
+	/* Compute actual representation error at this pixel */
+	/* Note: we can do this even though we don't have the final */
+	/* pixel code, because the colormap is orthogonal. */
+	cur -= GETJSAMPLE(colormap_ci[pixcode]);
+	/* Compute error fractions to be propagated to adjacent pixels.
+	 * Add these into the running sums, and simultaneously shift the
+	 * next-line error sums left by 1 column.
+	 */
+	bnexterr = cur;
+	delta = cur * 2;
+	cur += delta;		/* form error * 3 */
+	errorptr[0] = (FSERROR) (bpreverr + cur);
+	cur += delta;		/* form error * 5 */
+	bpreverr = belowerr + cur;
+	belowerr = bnexterr;
+	cur += delta;		/* form error * 7 */
+	/* At this point cur contains the 7/16 error value to be propagated
+	 * to the next pixel on the current line, and all the errors for the
+	 * next line have been shifted over. We are therefore ready to move on.
+	 */
+	input_ptr += dirnc;	/* advance input ptr to next column */
+	output_ptr += dir;	/* advance output ptr to next column */
+	errorptr += dir;	/* advance errorptr to current column */
+      }
+      /* Post-loop cleanup: we must unload the final error value into the
+       * final fserrors[] entry.  Note we need not unload belowerr because
+       * it is for the dummy column before or after the actual array.
+       */
+      errorptr[0] = (FSERROR) bpreverr; /* unload prev err into array */
+    }
+    cquantize->on_odd_row = (cquantize->on_odd_row ? FALSE : TRUE);
+  }
+}
+
+
+/*
+ * Allocate workspace for Floyd-Steinberg errors.
+ */
+
+LOCAL(void)
+alloc_fs_workspace (j_decompress_ptr cinfo)
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  size_t arraysize;
+  int i;
+
+  arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR));
+  for (i = 0; i < cinfo->out_color_components; i++) {
+    cquantize->fserrors[i] = (FSERRPTR)
+      (*cinfo->mem->alloc_large)((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize);
+  }
+}
+
+
+/*
+ * Initialize for one-pass color quantization.
+ */
+
+METHODDEF(void)
+start_pass_1_quant (j_decompress_ptr cinfo, boolean is_pre_scan)
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  size_t arraysize;
+  int i;
+
+  /* Install my colormap. */
+  cinfo->colormap = cquantize->sv_colormap;
+  cinfo->actual_number_of_colors = cquantize->sv_actual;
+
+  /* Initialize for desired dithering mode. */
+  switch (cinfo->dither_mode) {
+  case JDITHER_NONE:
+    if (cinfo->out_color_components == 3)
+      cquantize->pub.color_quantize = color_quantize3;
+    else
+      cquantize->pub.color_quantize = color_quantize;
+    break;
+  case JDITHER_ORDERED:
+    if (cinfo->out_color_components == 3)
+      cquantize->pub.color_quantize = quantize3_ord_dither;
+    else
+      cquantize->pub.color_quantize = quantize_ord_dither;
+    cquantize->row_index = 0;	/* initialize state for ordered dither */
+    /* If user changed to ordered dither from another mode,
+     * we must recreate the color index table with padding.
+     * This will cost extra space, but probably isn't very likely.
+     */
+    if (! cquantize->is_padded)
+      create_colorindex(cinfo);
+    /* Create ordered-dither tables if we didn't already. */
+    if (cquantize->odither[0] == NULL)
+      create_odither_tables(cinfo);
+    break;
+  case JDITHER_FS:
+    cquantize->pub.color_quantize = quantize_fs_dither;
+    cquantize->on_odd_row = FALSE; /* initialize state for F-S dither */
+    /* Allocate Floyd-Steinberg workspace if didn't already. */
+    if (cquantize->fserrors[0] == NULL)
+      alloc_fs_workspace(cinfo);
+    /* Initialize the propagated errors to zero. */
+    arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR));
+    for (i = 0; i < cinfo->out_color_components; i++)
+      FMEMZERO((void FAR *) cquantize->fserrors[i], arraysize);
+    break;
+  default:
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+    break;
+  }
+}
+
+
+/*
+ * Finish up at the end of the pass.
+ */
+
+METHODDEF(void)
+finish_pass_1_quant (j_decompress_ptr cinfo)
+{
+  /* no work in 1-pass case */
+}
+
+
+/*
+ * Switch to a new external colormap between output passes.
+ * Shouldn't get to this module!
+ */
+
+METHODDEF(void)
+new_color_map_1_quant (j_decompress_ptr cinfo)
+{
+  ERREXIT(cinfo, JERR_MODE_CHANGE);
+}
+
+
+/*
+ * Module initialization routine for 1-pass color quantization.
+ */
+
+GLOBAL(void)
+jinit_1pass_quantizer (j_decompress_ptr cinfo)
+{
+  my_cquantize_ptr cquantize;
+
+  cquantize = (my_cquantize_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_cquantizer));
+  cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize;
+  cquantize->pub.start_pass = start_pass_1_quant;
+  cquantize->pub.finish_pass = finish_pass_1_quant;
+  cquantize->pub.new_color_map = new_color_map_1_quant;
+  cquantize->fserrors[0] = NULL; /* Flag FS workspace not allocated */
+  cquantize->odither[0] = NULL;	/* Also flag odither arrays not allocated */
+
+  /* Make sure my internal arrays won't overflow */
+  if (cinfo->out_color_components > MAX_Q_COMPS)
+    ERREXIT1(cinfo, JERR_QUANT_COMPONENTS, MAX_Q_COMPS);
+  /* Make sure colormap indexes can be represented by JSAMPLEs */
+  if (cinfo->desired_number_of_colors > (MAXJSAMPLE+1))
+    ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXJSAMPLE+1);
+
+  /* Create the colormap and color index table. */
+  create_colormap(cinfo);
+  create_colorindex(cinfo);
+
+  /* Allocate Floyd-Steinberg workspace now if requested.
+   * We do this now since it is FAR storage and may affect the memory
+   * manager's space calculations.  If the user changes to FS dither
+   * mode in a later pass, we will allocate the space then, and will
+   * possibly overrun the max_memory_to_use setting.
+   */
+  if (cinfo->dither_mode == JDITHER_FS)
+    alloc_fs_workspace(cinfo);
+}
+
+#endif /* QUANT_1PASS_SUPPORTED */
diff --git a/jpeg-8d/jquant2.c b/jpeg-8d/jquant2.c
new file mode 100644
index 0000000..38fc2af
--- /dev/null
+++ b/jpeg-8d/jquant2.c
@@ -0,0 +1,1311 @@
+/*
+ * jquant2.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains 2-pass color quantization (color mapping) routines.
+ * These routines provide selection of a custom color map for an image,
+ * followed by mapping of the image to that color map, with optional
+ * Floyd-Steinberg dithering.
+ * It is also possible to use just the second pass to map to an arbitrary
+ * externally-given color map.
+ *
+ * Note: ordered dithering is not supported, since there isn't any fast
+ * way to compute intercolor distances; it's unclear that ordered dither's
+ * fundamental assumptions even hold with an irregularly spaced color map.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+#ifdef QUANT_2PASS_SUPPORTED
+
+
+/*
+ * This module implements the well-known Heckbert paradigm for color
+ * quantization.  Most of the ideas used here can be traced back to
+ * Heckbert's seminal paper
+ *   Heckbert, Paul.  "Color Image Quantization for Frame Buffer Display",
+ *   Proc. SIGGRAPH '82, Computer Graphics v.16 #3 (July 1982), pp 297-304.
+ *
+ * In the first pass over the image, we accumulate a histogram showing the
+ * usage count of each possible color.  To keep the histogram to a reasonable
+ * size, we reduce the precision of the input; typical practice is to retain
+ * 5 or 6 bits per color, so that 8 or 4 different input values are counted
+ * in the same histogram cell.
+ *
+ * Next, the color-selection step begins with a box representing the whole
+ * color space, and repeatedly splits the "largest" remaining box until we
+ * have as many boxes as desired colors.  Then the mean color in each
+ * remaining box becomes one of the possible output colors.
+ * 
+ * The second pass over the image maps each input pixel to the closest output
+ * color (optionally after applying a Floyd-Steinberg dithering correction).
+ * This mapping is logically trivial, but making it go fast enough requires
+ * considerable care.
+ *
+ * Heckbert-style quantizers vary a good deal in their policies for choosing
+ * the "largest" box and deciding where to cut it.  The particular policies
+ * used here have proved out well in experimental comparisons, but better ones
+ * may yet be found.
+ *
+ * In earlier versions of the IJG code, this module quantized in YCbCr color
+ * space, processing the raw upsampled data without a color conversion step.
+ * This allowed the color conversion math to be done only once per colormap
+ * entry, not once per pixel.  However, that optimization precluded other
+ * useful optimizations (such as merging color conversion with upsampling)
+ * and it also interfered with desired capabilities such as quantizing to an
+ * externally-supplied colormap.  We have therefore abandoned that approach.
+ * The present code works in the post-conversion color space, typically RGB.
+ *
+ * To improve the visual quality of the results, we actually work in scaled
+ * RGB space, giving G distances more weight than R, and R in turn more than
+ * B.  To do everything in integer math, we must use integer scale factors.
+ * The 2/3/1 scale factors used here correspond loosely to the relative
+ * weights of the colors in the NTSC grayscale equation.
+ * If you want to use this code to quantize a non-RGB color space, you'll
+ * probably need to change these scale factors.
+ */
+
+#define R_SCALE 2		/* scale R distances by this much */
+#define G_SCALE 3		/* scale G distances by this much */
+#define B_SCALE 1		/* and B by this much */
+
+/* Relabel R/G/B as components 0/1/2, respecting the RGB ordering defined
+ * in jmorecfg.h.  As the code stands, it will do the right thing for R,G,B
+ * and B,G,R orders.  If you define some other weird order in jmorecfg.h,
+ * you'll get compile errors until you extend this logic.  In that case
+ * you'll probably want to tweak the histogram sizes too.
+ */
+
+#if RGB_RED == 0
+#define C0_SCALE R_SCALE
+#endif
+#if RGB_BLUE == 0
+#define C0_SCALE B_SCALE
+#endif
+#if RGB_GREEN == 1
+#define C1_SCALE G_SCALE
+#endif
+#if RGB_RED == 2
+#define C2_SCALE R_SCALE
+#endif
+#if RGB_BLUE == 2
+#define C2_SCALE B_SCALE
+#endif
+
+
+/*
+ * First we have the histogram data structure and routines for creating it.
+ *
+ * The number of bits of precision can be adjusted by changing these symbols.
+ * We recommend keeping 6 bits for G and 5 each for R and B.
+ * If you have plenty of memory and cycles, 6 bits all around gives marginally
+ * better results; if you are short of memory, 5 bits all around will save
+ * some space but degrade the results.
+ * To maintain a fully accurate histogram, we'd need to allocate a "long"
+ * (preferably unsigned long) for each cell.  In practice this is overkill;
+ * we can get by with 16 bits per cell.  Few of the cell counts will overflow,
+ * and clamping those that do overflow to the maximum value will give close-
+ * enough results.  This reduces the recommended histogram size from 256Kb
+ * to 128Kb, which is a useful savings on PC-class machines.
+ * (In the second pass the histogram space is re-used for pixel mapping data;
+ * in that capacity, each cell must be able to store zero to the number of
+ * desired colors.  16 bits/cell is plenty for that too.)
+ * Since the JPEG code is intended to run in small memory model on 80x86
+ * machines, we can't just allocate the histogram in one chunk.  Instead
+ * of a true 3-D array, we use a row of pointers to 2-D arrays.  Each
+ * pointer corresponds to a C0 value (typically 2^5 = 32 pointers) and
+ * each 2-D array has 2^6*2^5 = 2048 or 2^6*2^6 = 4096 entries.  Note that
+ * on 80x86 machines, the pointer row is in near memory but the actual
+ * arrays are in far memory (same arrangement as we use for image arrays).
+ */
+
+#define MAXNUMCOLORS  (MAXJSAMPLE+1) /* maximum size of colormap */
+
+/* These will do the right thing for either R,G,B or B,G,R color order,
+ * but you may not like the results for other color orders.
+ */
+#define HIST_C0_BITS  5		/* bits of precision in R/B histogram */
+#define HIST_C1_BITS  6		/* bits of precision in G histogram */
+#define HIST_C2_BITS  5		/* bits of precision in B/R histogram */
+
+/* Number of elements along histogram axes. */
+#define HIST_C0_ELEMS  (1<<HIST_C0_BITS)
+#define HIST_C1_ELEMS  (1<<HIST_C1_BITS)
+#define HIST_C2_ELEMS  (1<<HIST_C2_BITS)
+
+/* These are the amounts to shift an input value to get a histogram index. */
+#define C0_SHIFT  (BITS_IN_JSAMPLE-HIST_C0_BITS)
+#define C1_SHIFT  (BITS_IN_JSAMPLE-HIST_C1_BITS)
+#define C2_SHIFT  (BITS_IN_JSAMPLE-HIST_C2_BITS)
+
+
+typedef UINT16 histcell;	/* histogram cell; prefer an unsigned type */
+
+typedef histcell FAR * histptr;	/* for pointers to histogram cells */
+
+typedef histcell hist1d[HIST_C2_ELEMS]; /* typedefs for the array */
+typedef hist1d FAR * hist2d;	/* type for the 2nd-level pointers */
+typedef hist2d * hist3d;	/* type for top-level pointer */
+
+
+/* Declarations for Floyd-Steinberg dithering.
+ *
+ * Errors are accumulated into the array fserrors[], at a resolution of
+ * 1/16th of a pixel count.  The error at a given pixel is propagated
+ * to its not-yet-processed neighbors using the standard F-S fractions,
+ *		...	(here)	7/16
+ *		3/16	5/16	1/16
+ * We work left-to-right on even rows, right-to-left on odd rows.
+ *
+ * We can get away with a single array (holding one row's worth of errors)
+ * by using it to store the current row's errors at pixel columns not yet
+ * processed, but the next row's errors at columns already processed.  We
+ * need only a few extra variables to hold the errors immediately around the
+ * current column.  (If we are lucky, those variables are in registers, but
+ * even if not, they're probably cheaper to access than array elements are.)
+ *
+ * The fserrors[] array has (#columns + 2) entries; the extra entry at
+ * each end saves us from special-casing the first and last pixels.
+ * Each entry is three values long, one value for each color component.
+ *
+ * Note: on a wide image, we might not have enough room in a PC's near data
+ * segment to hold the error array; so it is allocated with alloc_large.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+typedef INT16 FSERROR;		/* 16 bits should be enough */
+typedef int LOCFSERROR;		/* use 'int' for calculation temps */
+#else
+typedef INT32 FSERROR;		/* may need more than 16 bits */
+typedef INT32 LOCFSERROR;	/* be sure calculation temps are big enough */
+#endif
+
+typedef FSERROR FAR *FSERRPTR;	/* pointer to error array (in FAR storage!) */
+
+
+/* Private subobject */
+
+typedef struct {
+  struct jpeg_color_quantizer pub; /* public fields */
+
+  /* Space for the eventually created colormap is stashed here */
+  JSAMPARRAY sv_colormap;	/* colormap allocated at init time */
+  int desired;			/* desired # of colors = size of colormap */
+
+  /* Variables for accumulating image statistics */
+  hist3d histogram;		/* pointer to the histogram */
+
+  boolean needs_zeroed;		/* TRUE if next pass must zero histogram */
+
+  /* Variables for Floyd-Steinberg dithering */
+  FSERRPTR fserrors;		/* accumulated errors */
+  boolean on_odd_row;		/* flag to remember which row we are on */
+  int * error_limiter;		/* table for clamping the applied error */
+} my_cquantizer;
+
+typedef my_cquantizer * my_cquantize_ptr;
+
+
+/*
+ * Prescan some rows of pixels.
+ * In this module the prescan simply updates the histogram, which has been
+ * initialized to zeroes by start_pass.
+ * An output_buf parameter is required by the method signature, but no data
+ * is actually output (in fact the buffer controller is probably passing a
+ * NULL pointer).
+ */
+
+METHODDEF(void)
+prescan_quantize (j_decompress_ptr cinfo, JSAMPARRAY input_buf,
+		  JSAMPARRAY output_buf, int num_rows)
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  register JSAMPROW ptr;
+  register histptr histp;
+  register hist3d histogram = cquantize->histogram;
+  int row;
+  JDIMENSION col;
+  JDIMENSION width = cinfo->output_width;
+
+  for (row = 0; row < num_rows; row++) {
+    ptr = input_buf[row];
+    for (col = width; col > 0; col--) {
+      /* get pixel value and index into the histogram */
+      histp = & histogram[GETJSAMPLE(ptr[0]) >> C0_SHIFT]
+			 [GETJSAMPLE(ptr[1]) >> C1_SHIFT]
+			 [GETJSAMPLE(ptr[2]) >> C2_SHIFT];
+      /* increment, check for overflow and undo increment if so. */
+      if (++(*histp) <= 0)
+	(*histp)--;
+      ptr += 3;
+    }
+  }
+}
+
+
+/*
+ * Next we have the really interesting routines: selection of a colormap
+ * given the completed histogram.
+ * These routines work with a list of "boxes", each representing a rectangular
+ * subset of the input color space (to histogram precision).
+ */
+
+typedef struct {
+  /* The bounds of the box (inclusive); expressed as histogram indexes */
+  int c0min, c0max;
+  int c1min, c1max;
+  int c2min, c2max;
+  /* The volume (actually 2-norm) of the box */
+  INT32 volume;
+  /* The number of nonzero histogram cells within this box */
+  long colorcount;
+} box;
+
+typedef box * boxptr;
+
+
+LOCAL(boxptr)
+find_biggest_color_pop (boxptr boxlist, int numboxes)
+/* Find the splittable box with the largest color population */
+/* Returns NULL if no splittable boxes remain */
+{
+  register boxptr boxp;
+  register int i;
+  register long maxc = 0;
+  boxptr which = NULL;
+  
+  for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) {
+    if (boxp->colorcount > maxc && boxp->volume > 0) {
+      which = boxp;
+      maxc = boxp->colorcount;
+    }
+  }
+  return which;
+}
+
+
+LOCAL(boxptr)
+find_biggest_volume (boxptr boxlist, int numboxes)
+/* Find the splittable box with the largest (scaled) volume */
+/* Returns NULL if no splittable boxes remain */
+{
+  register boxptr boxp;
+  register int i;
+  register INT32 maxv = 0;
+  boxptr which = NULL;
+  
+  for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) {
+    if (boxp->volume > maxv) {
+      which = boxp;
+      maxv = boxp->volume;
+    }
+  }
+  return which;
+}
+
+
+LOCAL(void)
+update_box (j_decompress_ptr cinfo, boxptr boxp)
+/* Shrink the min/max bounds of a box to enclose only nonzero elements, */
+/* and recompute its volume and population */
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  hist3d histogram = cquantize->histogram;
+  histptr histp;
+  int c0,c1,c2;
+  int c0min,c0max,c1min,c1max,c2min,c2max;
+  INT32 dist0,dist1,dist2;
+  long ccount;
+  
+  c0min = boxp->c0min;  c0max = boxp->c0max;
+  c1min = boxp->c1min;  c1max = boxp->c1max;
+  c2min = boxp->c2min;  c2max = boxp->c2max;
+  
+  if (c0max > c0min)
+    for (c0 = c0min; c0 <= c0max; c0++)
+      for (c1 = c1min; c1 <= c1max; c1++) {
+	histp = & histogram[c0][c1][c2min];
+	for (c2 = c2min; c2 <= c2max; c2++)
+	  if (*histp++ != 0) {
+	    boxp->c0min = c0min = c0;
+	    goto have_c0min;
+	  }
+      }
+ have_c0min:
+  if (c0max > c0min)
+    for (c0 = c0max; c0 >= c0min; c0--)
+      for (c1 = c1min; c1 <= c1max; c1++) {
+	histp = & histogram[c0][c1][c2min];
+	for (c2 = c2min; c2 <= c2max; c2++)
+	  if (*histp++ != 0) {
+	    boxp->c0max = c0max = c0;
+	    goto have_c0max;
+	  }
+      }
+ have_c0max:
+  if (c1max > c1min)
+    for (c1 = c1min; c1 <= c1max; c1++)
+      for (c0 = c0min; c0 <= c0max; c0++) {
+	histp = & histogram[c0][c1][c2min];
+	for (c2 = c2min; c2 <= c2max; c2++)
+	  if (*histp++ != 0) {
+	    boxp->c1min = c1min = c1;
+	    goto have_c1min;
+	  }
+      }
+ have_c1min:
+  if (c1max > c1min)
+    for (c1 = c1max; c1 >= c1min; c1--)
+      for (c0 = c0min; c0 <= c0max; c0++) {
+	histp = & histogram[c0][c1][c2min];
+	for (c2 = c2min; c2 <= c2max; c2++)
+	  if (*histp++ != 0) {
+	    boxp->c1max = c1max = c1;
+	    goto have_c1max;
+	  }
+      }
+ have_c1max:
+  if (c2max > c2min)
+    for (c2 = c2min; c2 <= c2max; c2++)
+      for (c0 = c0min; c0 <= c0max; c0++) {
+	histp = & histogram[c0][c1min][c2];
+	for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS)
+	  if (*histp != 0) {
+	    boxp->c2min = c2min = c2;
+	    goto have_c2min;
+	  }
+      }
+ have_c2min:
+  if (c2max > c2min)
+    for (c2 = c2max; c2 >= c2min; c2--)
+      for (c0 = c0min; c0 <= c0max; c0++) {
+	histp = & histogram[c0][c1min][c2];
+	for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS)
+	  if (*histp != 0) {
+	    boxp->c2max = c2max = c2;
+	    goto have_c2max;
+	  }
+      }
+ have_c2max:
+
+  /* Update box volume.
+   * We use 2-norm rather than real volume here; this biases the method
+   * against making long narrow boxes, and it has the side benefit that
+   * a box is splittable iff norm > 0.
+   * Since the differences are expressed in histogram-cell units,
+   * we have to shift back to JSAMPLE units to get consistent distances;
+   * after which, we scale according to the selected distance scale factors.
+   */
+  dist0 = ((c0max - c0min) << C0_SHIFT) * C0_SCALE;
+  dist1 = ((c1max - c1min) << C1_SHIFT) * C1_SCALE;
+  dist2 = ((c2max - c2min) << C2_SHIFT) * C2_SCALE;
+  boxp->volume = dist0*dist0 + dist1*dist1 + dist2*dist2;
+  
+  /* Now scan remaining volume of box and compute population */
+  ccount = 0;
+  for (c0 = c0min; c0 <= c0max; c0++)
+    for (c1 = c1min; c1 <= c1max; c1++) {
+      histp = & histogram[c0][c1][c2min];
+      for (c2 = c2min; c2 <= c2max; c2++, histp++)
+	if (*histp != 0) {
+	  ccount++;
+	}
+    }
+  boxp->colorcount = ccount;
+}
+
+
+LOCAL(int)
+median_cut (j_decompress_ptr cinfo, boxptr boxlist, int numboxes,
+	    int desired_colors)
+/* Repeatedly select and split the largest box until we have enough boxes */
+{
+  int n,lb;
+  int c0,c1,c2,cmax;
+  register boxptr b1,b2;
+
+  while (numboxes < desired_colors) {
+    /* Select box to split.
+     * Current algorithm: by population for first half, then by volume.
+     */
+    if (numboxes*2 <= desired_colors) {
+      b1 = find_biggest_color_pop(boxlist, numboxes);
+    } else {
+      b1 = find_biggest_volume(boxlist, numboxes);
+    }
+    if (b1 == NULL)		/* no splittable boxes left! */
+      break;
+    b2 = &boxlist[numboxes];	/* where new box will go */
+    /* Copy the color bounds to the new box. */
+    b2->c0max = b1->c0max; b2->c1max = b1->c1max; b2->c2max = b1->c2max;
+    b2->c0min = b1->c0min; b2->c1min = b1->c1min; b2->c2min = b1->c2min;
+    /* Choose which axis to split the box on.
+     * Current algorithm: longest scaled axis.
+     * See notes in update_box about scaling distances.
+     */
+    c0 = ((b1->c0max - b1->c0min) << C0_SHIFT) * C0_SCALE;
+    c1 = ((b1->c1max - b1->c1min) << C1_SHIFT) * C1_SCALE;
+    c2 = ((b1->c2max - b1->c2min) << C2_SHIFT) * C2_SCALE;
+    /* We want to break any ties in favor of green, then red, blue last.
+     * This code does the right thing for R,G,B or B,G,R color orders only.
+     */
+#if RGB_RED == 0
+    cmax = c1; n = 1;
+    if (c0 > cmax) { cmax = c0; n = 0; }
+    if (c2 > cmax) { n = 2; }
+#else
+    cmax = c1; n = 1;
+    if (c2 > cmax) { cmax = c2; n = 2; }
+    if (c0 > cmax) { n = 0; }
+#endif
+    /* Choose split point along selected axis, and update box bounds.
+     * Current algorithm: split at halfway point.
+     * (Since the box has been shrunk to minimum volume,
+     * any split will produce two nonempty subboxes.)
+     * Note that lb value is max for lower box, so must be < old max.
+     */
+    switch (n) {
+    case 0:
+      lb = (b1->c0max + b1->c0min) / 2;
+      b1->c0max = lb;
+      b2->c0min = lb+1;
+      break;
+    case 1:
+      lb = (b1->c1max + b1->c1min) / 2;
+      b1->c1max = lb;
+      b2->c1min = lb+1;
+      break;
+    case 2:
+      lb = (b1->c2max + b1->c2min) / 2;
+      b1->c2max = lb;
+      b2->c2min = lb+1;
+      break;
+    }
+    /* Update stats for boxes */
+    update_box(cinfo, b1);
+    update_box(cinfo, b2);
+    numboxes++;
+  }
+  return numboxes;
+}
+
+
+LOCAL(void)
+compute_color (j_decompress_ptr cinfo, boxptr boxp, int icolor)
+/* Compute representative color for a box, put it in colormap[icolor] */
+{
+  /* Current algorithm: mean weighted by pixels (not colors) */
+  /* Note it is important to get the rounding correct! */
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  hist3d histogram = cquantize->histogram;
+  histptr histp;
+  int c0,c1,c2;
+  int c0min,c0max,c1min,c1max,c2min,c2max;
+  long count;
+  long total = 0;
+  long c0total = 0;
+  long c1total = 0;
+  long c2total = 0;
+  
+  c0min = boxp->c0min;  c0max = boxp->c0max;
+  c1min = boxp->c1min;  c1max = boxp->c1max;
+  c2min = boxp->c2min;  c2max = boxp->c2max;
+  
+  for (c0 = c0min; c0 <= c0max; c0++)
+    for (c1 = c1min; c1 <= c1max; c1++) {
+      histp = & histogram[c0][c1][c2min];
+      for (c2 = c2min; c2 <= c2max; c2++) {
+	if ((count = *histp++) != 0) {
+	  total += count;
+	  c0total += ((c0 << C0_SHIFT) + ((1<<C0_SHIFT)>>1)) * count;
+	  c1total += ((c1 << C1_SHIFT) + ((1<<C1_SHIFT)>>1)) * count;
+	  c2total += ((c2 << C2_SHIFT) + ((1<<C2_SHIFT)>>1)) * count;
+	}
+      }
+    }
+  
+  cinfo->colormap[0][icolor] = (JSAMPLE) ((c0total + (total>>1)) / total);
+  cinfo->colormap[1][icolor] = (JSAMPLE) ((c1total + (total>>1)) / total);
+  cinfo->colormap[2][icolor] = (JSAMPLE) ((c2total + (total>>1)) / total);
+}
+
+
+LOCAL(void)
+select_colors (j_decompress_ptr cinfo, int desired_colors)
+/* Master routine for color selection */
+{
+  boxptr boxlist;
+  int numboxes;
+  int i;
+
+  /* Allocate workspace for box list */
+  boxlist = (boxptr) (*cinfo->mem->alloc_small)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, desired_colors * SIZEOF(box));
+  /* Initialize one box containing whole space */
+  numboxes = 1;
+  boxlist[0].c0min = 0;
+  boxlist[0].c0max = MAXJSAMPLE >> C0_SHIFT;
+  boxlist[0].c1min = 0;
+  boxlist[0].c1max = MAXJSAMPLE >> C1_SHIFT;
+  boxlist[0].c2min = 0;
+  boxlist[0].c2max = MAXJSAMPLE >> C2_SHIFT;
+  /* Shrink it to actually-used volume and set its statistics */
+  update_box(cinfo, & boxlist[0]);
+  /* Perform median-cut to produce final box list */
+  numboxes = median_cut(cinfo, boxlist, numboxes, desired_colors);
+  /* Compute the representative color for each box, fill colormap */
+  for (i = 0; i < numboxes; i++)
+    compute_color(cinfo, & boxlist[i], i);
+  cinfo->actual_number_of_colors = numboxes;
+  TRACEMS1(cinfo, 1, JTRC_QUANT_SELECTED, numboxes);
+}
+
+
+/*
+ * These routines are concerned with the time-critical task of mapping input
+ * colors to the nearest color in the selected colormap.
+ *
+ * We re-use the histogram space as an "inverse color map", essentially a
+ * cache for the results of nearest-color searches.  All colors within a
+ * histogram cell will be mapped to the same colormap entry, namely the one
+ * closest to the cell's center.  This may not be quite the closest entry to
+ * the actual input color, but it's almost as good.  A zero in the cache
+ * indicates we haven't found the nearest color for that cell yet; the array
+ * is cleared to zeroes before starting the mapping pass.  When we find the
+ * nearest color for a cell, its colormap index plus one is recorded in the
+ * cache for future use.  The pass2 scanning routines call fill_inverse_cmap
+ * when they need to use an unfilled entry in the cache.
+ *
+ * Our method of efficiently finding nearest colors is based on the "locally
+ * sorted search" idea described by Heckbert and on the incremental distance
+ * calculation described by Spencer W. Thomas in chapter III.1 of Graphics
+ * Gems II (James Arvo, ed.  Academic Press, 1991).  Thomas points out that
+ * the distances from a given colormap entry to each cell of the histogram can
+ * be computed quickly using an incremental method: the differences between
+ * distances to adjacent cells themselves differ by a constant.  This allows a
+ * fairly fast implementation of the "brute force" approach of computing the
+ * distance from every colormap entry to every histogram cell.  Unfortunately,
+ * it needs a work array to hold the best-distance-so-far for each histogram
+ * cell (because the inner loop has to be over cells, not colormap entries).
+ * The work array elements have to be INT32s, so the work array would need
+ * 256Kb at our recommended precision.  This is not feasible in DOS machines.
+ *
+ * To get around these problems, we apply Thomas' method to compute the
+ * nearest colors for only the cells within a small subbox of the histogram.
+ * The work array need be only as big as the subbox, so the memory usage
+ * problem is solved.  Furthermore, we need not fill subboxes that are never
+ * referenced in pass2; many images use only part of the color gamut, so a
+ * fair amount of work is saved.  An additional advantage of this
+ * approach is that we can apply Heckbert's locality criterion to quickly
+ * eliminate colormap entries that are far away from the subbox; typically
+ * three-fourths of the colormap entries are rejected by Heckbert's criterion,
+ * and we need not compute their distances to individual cells in the subbox.
+ * The speed of this approach is heavily influenced by the subbox size: too
+ * small means too much overhead, too big loses because Heckbert's criterion
+ * can't eliminate as many colormap entries.  Empirically the best subbox
+ * size seems to be about 1/512th of the histogram (1/8th in each direction).
+ *
+ * Thomas' article also describes a refined method which is asymptotically
+ * faster than the brute-force method, but it is also far more complex and
+ * cannot efficiently be applied to small subboxes.  It is therefore not
+ * useful for programs intended to be portable to DOS machines.  On machines
+ * with plenty of memory, filling the whole histogram in one shot with Thomas'
+ * refined method might be faster than the present code --- but then again,
+ * it might not be any faster, and it's certainly more complicated.
+ */
+
+
+/* log2(histogram cells in update box) for each axis; this can be adjusted */
+#define BOX_C0_LOG  (HIST_C0_BITS-3)
+#define BOX_C1_LOG  (HIST_C1_BITS-3)
+#define BOX_C2_LOG  (HIST_C2_BITS-3)
+
+#define BOX_C0_ELEMS  (1<<BOX_C0_LOG) /* # of hist cells in update box */
+#define BOX_C1_ELEMS  (1<<BOX_C1_LOG)
+#define BOX_C2_ELEMS  (1<<BOX_C2_LOG)
+
+#define BOX_C0_SHIFT  (C0_SHIFT + BOX_C0_LOG)
+#define BOX_C1_SHIFT  (C1_SHIFT + BOX_C1_LOG)
+#define BOX_C2_SHIFT  (C2_SHIFT + BOX_C2_LOG)
+
+
+/*
+ * The next three routines implement inverse colormap filling.  They could
+ * all be folded into one big routine, but splitting them up this way saves
+ * some stack space (the mindist[] and bestdist[] arrays need not coexist)
+ * and may allow some compilers to produce better code by registerizing more
+ * inner-loop variables.
+ */
+
+LOCAL(int)
+find_nearby_colors (j_decompress_ptr cinfo, int minc0, int minc1, int minc2,
+		    JSAMPLE colorlist[])
+/* Locate the colormap entries close enough to an update box to be candidates
+ * for the nearest entry to some cell(s) in the update box.  The update box
+ * is specified by the center coordinates of its first cell.  The number of
+ * candidate colormap entries is returned, and their colormap indexes are
+ * placed in colorlist[].
+ * This routine uses Heckbert's "locally sorted search" criterion to select
+ * the colors that need further consideration.
+ */
+{
+  int numcolors = cinfo->actual_number_of_colors;
+  int maxc0, maxc1, maxc2;
+  int centerc0, centerc1, centerc2;
+  int i, x, ncolors;
+  INT32 minmaxdist, min_dist, max_dist, tdist;
+  INT32 mindist[MAXNUMCOLORS];	/* min distance to colormap entry i */
+
+  /* Compute true coordinates of update box's upper corner and center.
+   * Actually we compute the coordinates of the center of the upper-corner
+   * histogram cell, which are the upper bounds of the volume we care about.
+   * Note that since ">>" rounds down, the "center" values may be closer to
+   * min than to max; hence comparisons to them must be "<=", not "<".
+   */
+  maxc0 = minc0 + ((1 << BOX_C0_SHIFT) - (1 << C0_SHIFT));
+  centerc0 = (minc0 + maxc0) >> 1;
+  maxc1 = minc1 + ((1 << BOX_C1_SHIFT) - (1 << C1_SHIFT));
+  centerc1 = (minc1 + maxc1) >> 1;
+  maxc2 = minc2 + ((1 << BOX_C2_SHIFT) - (1 << C2_SHIFT));
+  centerc2 = (minc2 + maxc2) >> 1;
+
+  /* For each color in colormap, find:
+   *  1. its minimum squared-distance to any point in the update box
+   *     (zero if color is within update box);
+   *  2. its maximum squared-distance to any point in the update box.
+   * Both of these can be found by considering only the corners of the box.
+   * We save the minimum distance for each color in mindist[];
+   * only the smallest maximum distance is of interest.
+   */
+  minmaxdist = 0x7FFFFFFFL;
+
+  for (i = 0; i < numcolors; i++) {
+    /* We compute the squared-c0-distance term, then add in the other two. */
+    x = GETJSAMPLE(cinfo->colormap[0][i]);
+    if (x < minc0) {
+      tdist = (x - minc0) * C0_SCALE;
+      min_dist = tdist*tdist;
+      tdist = (x - maxc0) * C0_SCALE;
+      max_dist = tdist*tdist;
+    } else if (x > maxc0) {
+      tdist = (x - maxc0) * C0_SCALE;
+      min_dist = tdist*tdist;
+      tdist = (x - minc0) * C0_SCALE;
+      max_dist = tdist*tdist;
+    } else {
+      /* within cell range so no contribution to min_dist */
+      min_dist = 0;
+      if (x <= centerc0) {
+	tdist = (x - maxc0) * C0_SCALE;
+	max_dist = tdist*tdist;
+      } else {
+	tdist = (x - minc0) * C0_SCALE;
+	max_dist = tdist*tdist;
+      }
+    }
+
+    x = GETJSAMPLE(cinfo->colormap[1][i]);
+    if (x < minc1) {
+      tdist = (x - minc1) * C1_SCALE;
+      min_dist += tdist*tdist;
+      tdist = (x - maxc1) * C1_SCALE;
+      max_dist += tdist*tdist;
+    } else if (x > maxc1) {
+      tdist = (x - maxc1) * C1_SCALE;
+      min_dist += tdist*tdist;
+      tdist = (x - minc1) * C1_SCALE;
+      max_dist += tdist*tdist;
+    } else {
+      /* within cell range so no contribution to min_dist */
+      if (x <= centerc1) {
+	tdist = (x - maxc1) * C1_SCALE;
+	max_dist += tdist*tdist;
+      } else {
+	tdist = (x - minc1) * C1_SCALE;
+	max_dist += tdist*tdist;
+      }
+    }
+
+    x = GETJSAMPLE(cinfo->colormap[2][i]);
+    if (x < minc2) {
+      tdist = (x - minc2) * C2_SCALE;
+      min_dist += tdist*tdist;
+      tdist = (x - maxc2) * C2_SCALE;
+      max_dist += tdist*tdist;
+    } else if (x > maxc2) {
+      tdist = (x - maxc2) * C2_SCALE;
+      min_dist += tdist*tdist;
+      tdist = (x - minc2) * C2_SCALE;
+      max_dist += tdist*tdist;
+    } else {
+      /* within cell range so no contribution to min_dist */
+      if (x <= centerc2) {
+	tdist = (x - maxc2) * C2_SCALE;
+	max_dist += tdist*tdist;
+      } else {
+	tdist = (x - minc2) * C2_SCALE;
+	max_dist += tdist*tdist;
+      }
+    }
+
+    mindist[i] = min_dist;	/* save away the results */
+    if (max_dist < minmaxdist)
+      minmaxdist = max_dist;
+  }
+
+  /* Now we know that no cell in the update box is more than minmaxdist
+   * away from some colormap entry.  Therefore, only colors that are
+   * within minmaxdist of some part of the box need be considered.
+   */
+  ncolors = 0;
+  for (i = 0; i < numcolors; i++) {
+    if (mindist[i] <= minmaxdist)
+      colorlist[ncolors++] = (JSAMPLE) i;
+  }
+  return ncolors;
+}
+
+
+LOCAL(void)
+find_best_colors (j_decompress_ptr cinfo, int minc0, int minc1, int minc2,
+		  int numcolors, JSAMPLE colorlist[], JSAMPLE bestcolor[])
+/* Find the closest colormap entry for each cell in the update box,
+ * given the list of candidate colors prepared by find_nearby_colors.
+ * Return the indexes of the closest entries in the bestcolor[] array.
+ * This routine uses Thomas' incremental distance calculation method to
+ * find the distance from a colormap entry to successive cells in the box.
+ */
+{
+  int ic0, ic1, ic2;
+  int i, icolor;
+  register INT32 * bptr;	/* pointer into bestdist[] array */
+  JSAMPLE * cptr;		/* pointer into bestcolor[] array */
+  INT32 dist0, dist1;		/* initial distance values */
+  register INT32 dist2;		/* current distance in inner loop */
+  INT32 xx0, xx1;		/* distance increments */
+  register INT32 xx2;
+  INT32 inc0, inc1, inc2;	/* initial values for increments */
+  /* This array holds the distance to the nearest-so-far color for each cell */
+  INT32 bestdist[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS];
+
+  /* Initialize best-distance for each cell of the update box */
+  bptr = bestdist;
+  for (i = BOX_C0_ELEMS*BOX_C1_ELEMS*BOX_C2_ELEMS-1; i >= 0; i--)
+    *bptr++ = 0x7FFFFFFFL;
+  
+  /* For each color selected by find_nearby_colors,
+   * compute its distance to the center of each cell in the box.
+   * If that's less than best-so-far, update best distance and color number.
+   */
+  
+  /* Nominal steps between cell centers ("x" in Thomas article) */
+#define STEP_C0  ((1 << C0_SHIFT) * C0_SCALE)
+#define STEP_C1  ((1 << C1_SHIFT) * C1_SCALE)
+#define STEP_C2  ((1 << C2_SHIFT) * C2_SCALE)
+  
+  for (i = 0; i < numcolors; i++) {
+    icolor = GETJSAMPLE(colorlist[i]);
+    /* Compute (square of) distance from minc0/c1/c2 to this color */
+    inc0 = (minc0 - GETJSAMPLE(cinfo->colormap[0][icolor])) * C0_SCALE;
+    dist0 = inc0*inc0;
+    inc1 = (minc1 - GETJSAMPLE(cinfo->colormap[1][icolor])) * C1_SCALE;
+    dist0 += inc1*inc1;
+    inc2 = (minc2 - GETJSAMPLE(cinfo->colormap[2][icolor])) * C2_SCALE;
+    dist0 += inc2*inc2;
+    /* Form the initial difference increments */
+    inc0 = inc0 * (2 * STEP_C0) + STEP_C0 * STEP_C0;
+    inc1 = inc1 * (2 * STEP_C1) + STEP_C1 * STEP_C1;
+    inc2 = inc2 * (2 * STEP_C2) + STEP_C2 * STEP_C2;
+    /* Now loop over all cells in box, updating distance per Thomas method */
+    bptr = bestdist;
+    cptr = bestcolor;
+    xx0 = inc0;
+    for (ic0 = BOX_C0_ELEMS-1; ic0 >= 0; ic0--) {
+      dist1 = dist0;
+      xx1 = inc1;
+      for (ic1 = BOX_C1_ELEMS-1; ic1 >= 0; ic1--) {
+	dist2 = dist1;
+	xx2 = inc2;
+	for (ic2 = BOX_C2_ELEMS-1; ic2 >= 0; ic2--) {
+	  if (dist2 < *bptr) {
+	    *bptr = dist2;
+	    *cptr = (JSAMPLE) icolor;
+	  }
+	  dist2 += xx2;
+	  xx2 += 2 * STEP_C2 * STEP_C2;
+	  bptr++;
+	  cptr++;
+	}
+	dist1 += xx1;
+	xx1 += 2 * STEP_C1 * STEP_C1;
+      }
+      dist0 += xx0;
+      xx0 += 2 * STEP_C0 * STEP_C0;
+    }
+  }
+}
+
+
+LOCAL(void)
+fill_inverse_cmap (j_decompress_ptr cinfo, int c0, int c1, int c2)
+/* Fill the inverse-colormap entries in the update box that contains */
+/* histogram cell c0/c1/c2.  (Only that one cell MUST be filled, but */
+/* we can fill as many others as we wish.) */
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  hist3d histogram = cquantize->histogram;
+  int minc0, minc1, minc2;	/* lower left corner of update box */
+  int ic0, ic1, ic2;
+  register JSAMPLE * cptr;	/* pointer into bestcolor[] array */
+  register histptr cachep;	/* pointer into main cache array */
+  /* This array lists the candidate colormap indexes. */
+  JSAMPLE colorlist[MAXNUMCOLORS];
+  int numcolors;		/* number of candidate colors */
+  /* This array holds the actually closest colormap index for each cell. */
+  JSAMPLE bestcolor[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS];
+
+  /* Convert cell coordinates to update box ID */
+  c0 >>= BOX_C0_LOG;
+  c1 >>= BOX_C1_LOG;
+  c2 >>= BOX_C2_LOG;
+
+  /* Compute true coordinates of update box's origin corner.
+   * Actually we compute the coordinates of the center of the corner
+   * histogram cell, which are the lower bounds of the volume we care about.
+   */
+  minc0 = (c0 << BOX_C0_SHIFT) + ((1 << C0_SHIFT) >> 1);
+  minc1 = (c1 << BOX_C1_SHIFT) + ((1 << C1_SHIFT) >> 1);
+  minc2 = (c2 << BOX_C2_SHIFT) + ((1 << C2_SHIFT) >> 1);
+  
+  /* Determine which colormap entries are close enough to be candidates
+   * for the nearest entry to some cell in the update box.
+   */
+  numcolors = find_nearby_colors(cinfo, minc0, minc1, minc2, colorlist);
+
+  /* Determine the actually nearest colors. */
+  find_best_colors(cinfo, minc0, minc1, minc2, numcolors, colorlist,
+		   bestcolor);
+
+  /* Save the best color numbers (plus 1) in the main cache array */
+  c0 <<= BOX_C0_LOG;		/* convert ID back to base cell indexes */
+  c1 <<= BOX_C1_LOG;
+  c2 <<= BOX_C2_LOG;
+  cptr = bestcolor;
+  for (ic0 = 0; ic0 < BOX_C0_ELEMS; ic0++) {
+    for (ic1 = 0; ic1 < BOX_C1_ELEMS; ic1++) {
+      cachep = & histogram[c0+ic0][c1+ic1][c2];
+      for (ic2 = 0; ic2 < BOX_C2_ELEMS; ic2++) {
+	*cachep++ = (histcell) (GETJSAMPLE(*cptr++) + 1);
+      }
+    }
+  }
+}
+
+
+/*
+ * Map some rows of pixels to the output colormapped representation.
+ */
+
+METHODDEF(void)
+pass2_no_dither (j_decompress_ptr cinfo,
+		 JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows)
+/* This version performs no dithering */
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  hist3d histogram = cquantize->histogram;
+  register JSAMPROW inptr, outptr;
+  register histptr cachep;
+  register int c0, c1, c2;
+  int row;
+  JDIMENSION col;
+  JDIMENSION width = cinfo->output_width;
+
+  for (row = 0; row < num_rows; row++) {
+    inptr = input_buf[row];
+    outptr = output_buf[row];
+    for (col = width; col > 0; col--) {
+      /* get pixel value and index into the cache */
+      c0 = GETJSAMPLE(*inptr++) >> C0_SHIFT;
+      c1 = GETJSAMPLE(*inptr++) >> C1_SHIFT;
+      c2 = GETJSAMPLE(*inptr++) >> C2_SHIFT;
+      cachep = & histogram[c0][c1][c2];
+      /* If we have not seen this color before, find nearest colormap entry */
+      /* and update the cache */
+      if (*cachep == 0)
+	fill_inverse_cmap(cinfo, c0,c1,c2);
+      /* Now emit the colormap index for this cell */
+      *outptr++ = (JSAMPLE) (*cachep - 1);
+    }
+  }
+}
+
+
+METHODDEF(void)
+pass2_fs_dither (j_decompress_ptr cinfo,
+		 JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows)
+/* This version performs Floyd-Steinberg dithering */
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  hist3d histogram = cquantize->histogram;
+  register LOCFSERROR cur0, cur1, cur2;	/* current error or pixel value */
+  LOCFSERROR belowerr0, belowerr1, belowerr2; /* error for pixel below cur */
+  LOCFSERROR bpreverr0, bpreverr1, bpreverr2; /* error for below/prev col */
+  register FSERRPTR errorptr;	/* => fserrors[] at column before current */
+  JSAMPROW inptr;		/* => current input pixel */
+  JSAMPROW outptr;		/* => current output pixel */
+  histptr cachep;
+  int dir;			/* +1 or -1 depending on direction */
+  int dir3;			/* 3*dir, for advancing inptr & errorptr */
+  int row;
+  JDIMENSION col;
+  JDIMENSION width = cinfo->output_width;
+  JSAMPLE *range_limit = cinfo->sample_range_limit;
+  int *error_limit = cquantize->error_limiter;
+  JSAMPROW colormap0 = cinfo->colormap[0];
+  JSAMPROW colormap1 = cinfo->colormap[1];
+  JSAMPROW colormap2 = cinfo->colormap[2];
+  SHIFT_TEMPS
+
+  for (row = 0; row < num_rows; row++) {
+    inptr = input_buf[row];
+    outptr = output_buf[row];
+    if (cquantize->on_odd_row) {
+      /* work right to left in this row */
+      inptr += (width-1) * 3;	/* so point to rightmost pixel */
+      outptr += width-1;
+      dir = -1;
+      dir3 = -3;
+      errorptr = cquantize->fserrors + (width+1)*3; /* => entry after last column */
+      cquantize->on_odd_row = FALSE; /* flip for next time */
+    } else {
+      /* work left to right in this row */
+      dir = 1;
+      dir3 = 3;
+      errorptr = cquantize->fserrors; /* => entry before first real column */
+      cquantize->on_odd_row = TRUE; /* flip for next time */
+    }
+    /* Preset error values: no error propagated to first pixel from left */
+    cur0 = cur1 = cur2 = 0;
+    /* and no error propagated to row below yet */
+    belowerr0 = belowerr1 = belowerr2 = 0;
+    bpreverr0 = bpreverr1 = bpreverr2 = 0;
+
+    for (col = width; col > 0; col--) {
+      /* curN holds the error propagated from the previous pixel on the
+       * current line.  Add the error propagated from the previous line
+       * to form the complete error correction term for this pixel, and
+       * round the error term (which is expressed * 16) to an integer.
+       * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct
+       * for either sign of the error value.
+       * Note: errorptr points to *previous* column's array entry.
+       */
+      cur0 = RIGHT_SHIFT(cur0 + errorptr[dir3+0] + 8, 4);
+      cur1 = RIGHT_SHIFT(cur1 + errorptr[dir3+1] + 8, 4);
+      cur2 = RIGHT_SHIFT(cur2 + errorptr[dir3+2] + 8, 4);
+      /* Limit the error using transfer function set by init_error_limit.
+       * See comments with init_error_limit for rationale.
+       */
+      cur0 = error_limit[cur0];
+      cur1 = error_limit[cur1];
+      cur2 = error_limit[cur2];
+      /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE.
+       * The maximum error is +- MAXJSAMPLE (or less with error limiting);
+       * this sets the required size of the range_limit array.
+       */
+      cur0 += GETJSAMPLE(inptr[0]);
+      cur1 += GETJSAMPLE(inptr[1]);
+      cur2 += GETJSAMPLE(inptr[2]);
+      cur0 = GETJSAMPLE(range_limit[cur0]);
+      cur1 = GETJSAMPLE(range_limit[cur1]);
+      cur2 = GETJSAMPLE(range_limit[cur2]);
+      /* Index into the cache with adjusted pixel value */
+      cachep = & histogram[cur0>>C0_SHIFT][cur1>>C1_SHIFT][cur2>>C2_SHIFT];
+      /* If we have not seen this color before, find nearest colormap */
+      /* entry and update the cache */
+      if (*cachep == 0)
+	fill_inverse_cmap(cinfo, cur0>>C0_SHIFT,cur1>>C1_SHIFT,cur2>>C2_SHIFT);
+      /* Now emit the colormap index for this cell */
+      { register int pixcode = *cachep - 1;
+	*outptr = (JSAMPLE) pixcode;
+	/* Compute representation error for this pixel */
+	cur0 -= GETJSAMPLE(colormap0[pixcode]);
+	cur1 -= GETJSAMPLE(colormap1[pixcode]);
+	cur2 -= GETJSAMPLE(colormap2[pixcode]);
+      }
+      /* Compute error fractions to be propagated to adjacent pixels.
+       * Add these into the running sums, and simultaneously shift the
+       * next-line error sums left by 1 column.
+       */
+      { register LOCFSERROR bnexterr, delta;
+
+	bnexterr = cur0;	/* Process component 0 */
+	delta = cur0 * 2;
+	cur0 += delta;		/* form error * 3 */
+	errorptr[0] = (FSERROR) (bpreverr0 + cur0);
+	cur0 += delta;		/* form error * 5 */
+	bpreverr0 = belowerr0 + cur0;
+	belowerr0 = bnexterr;
+	cur0 += delta;		/* form error * 7 */
+	bnexterr = cur1;	/* Process component 1 */
+	delta = cur1 * 2;
+	cur1 += delta;		/* form error * 3 */
+	errorptr[1] = (FSERROR) (bpreverr1 + cur1);
+	cur1 += delta;		/* form error * 5 */
+	bpreverr1 = belowerr1 + cur1;
+	belowerr1 = bnexterr;
+	cur1 += delta;		/* form error * 7 */
+	bnexterr = cur2;	/* Process component 2 */
+	delta = cur2 * 2;
+	cur2 += delta;		/* form error * 3 */
+	errorptr[2] = (FSERROR) (bpreverr2 + cur2);
+	cur2 += delta;		/* form error * 5 */
+	bpreverr2 = belowerr2 + cur2;
+	belowerr2 = bnexterr;
+	cur2 += delta;		/* form error * 7 */
+      }
+      /* At this point curN contains the 7/16 error value to be propagated
+       * to the next pixel on the current line, and all the errors for the
+       * next line have been shifted over.  We are therefore ready to move on.
+       */
+      inptr += dir3;		/* Advance pixel pointers to next column */
+      outptr += dir;
+      errorptr += dir3;		/* advance errorptr to current column */
+    }
+    /* Post-loop cleanup: we must unload the final error values into the
+     * final fserrors[] entry.  Note we need not unload belowerrN because
+     * it is for the dummy column before or after the actual array.
+     */
+    errorptr[0] = (FSERROR) bpreverr0; /* unload prev errs into array */
+    errorptr[1] = (FSERROR) bpreverr1;
+    errorptr[2] = (FSERROR) bpreverr2;
+  }
+}
+
+
+/*
+ * Initialize the error-limiting transfer function (lookup table).
+ * The raw F-S error computation can potentially compute error values of up to
+ * +- MAXJSAMPLE.  But we want the maximum correction applied to a pixel to be
+ * much less, otherwise obviously wrong pixels will be created.  (Typical
+ * effects include weird fringes at color-area boundaries, isolated bright
+ * pixels in a dark area, etc.)  The standard advice for avoiding this problem
+ * is to ensure that the "corners" of the color cube are allocated as output
+ * colors; then repeated errors in the same direction cannot cause cascading
+ * error buildup.  However, that only prevents the error from getting
+ * completely out of hand; Aaron Giles reports that error limiting improves
+ * the results even with corner colors allocated.
+ * A simple clamping of the error values to about +- MAXJSAMPLE/8 works pretty
+ * well, but the smoother transfer function used below is even better.  Thanks
+ * to Aaron Giles for this idea.
+ */
+
+LOCAL(void)
+init_error_limit (j_decompress_ptr cinfo)
+/* Allocate and fill in the error_limiter table */
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  int * table;
+  int in, out;
+
+  table = (int *) (*cinfo->mem->alloc_small)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE*2+1) * SIZEOF(int));
+  table += MAXJSAMPLE;		/* so can index -MAXJSAMPLE .. +MAXJSAMPLE */
+  cquantize->error_limiter = table;
+
+#define STEPSIZE ((MAXJSAMPLE+1)/16)
+  /* Map errors 1:1 up to +- MAXJSAMPLE/16 */
+  out = 0;
+  for (in = 0; in < STEPSIZE; in++, out++) {
+    table[in] = out; table[-in] = -out;
+  }
+  /* Map errors 1:2 up to +- 3*MAXJSAMPLE/16 */
+  for (; in < STEPSIZE*3; in++, out += (in&1) ? 0 : 1) {
+    table[in] = out; table[-in] = -out;
+  }
+  /* Clamp the rest to final out value (which is (MAXJSAMPLE+1)/8) */
+  for (; in <= MAXJSAMPLE; in++) {
+    table[in] = out; table[-in] = -out;
+  }
+#undef STEPSIZE
+}
+
+
+/*
+ * Finish up at the end of each pass.
+ */
+
+METHODDEF(void)
+finish_pass1 (j_decompress_ptr cinfo)
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+
+  /* Select the representative colors and fill in cinfo->colormap */
+  cinfo->colormap = cquantize->sv_colormap;
+  select_colors(cinfo, cquantize->desired);
+  /* Force next pass to zero the color index table */
+  cquantize->needs_zeroed = TRUE;
+}
+
+
+METHODDEF(void)
+finish_pass2 (j_decompress_ptr cinfo)
+{
+  /* no work */
+}
+
+
+/*
+ * Initialize for each processing pass.
+ */
+
+METHODDEF(void)
+start_pass_2_quant (j_decompress_ptr cinfo, boolean is_pre_scan)
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+  hist3d histogram = cquantize->histogram;
+  int i;
+
+  /* Only F-S dithering or no dithering is supported. */
+  /* If user asks for ordered dither, give him F-S. */
+  if (cinfo->dither_mode != JDITHER_NONE)
+    cinfo->dither_mode = JDITHER_FS;
+
+  if (is_pre_scan) {
+    /* Set up method pointers */
+    cquantize->pub.color_quantize = prescan_quantize;
+    cquantize->pub.finish_pass = finish_pass1;
+    cquantize->needs_zeroed = TRUE; /* Always zero histogram */
+  } else {
+    /* Set up method pointers */
+    if (cinfo->dither_mode == JDITHER_FS)
+      cquantize->pub.color_quantize = pass2_fs_dither;
+    else
+      cquantize->pub.color_quantize = pass2_no_dither;
+    cquantize->pub.finish_pass = finish_pass2;
+
+    /* Make sure color count is acceptable */
+    i = cinfo->actual_number_of_colors;
+    if (i < 1)
+      ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 1);
+    if (i > MAXNUMCOLORS)
+      ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS);
+
+    if (cinfo->dither_mode == JDITHER_FS) {
+      size_t arraysize = (size_t) ((cinfo->output_width + 2) *
+				   (3 * SIZEOF(FSERROR)));
+      /* Allocate Floyd-Steinberg workspace if we didn't already. */
+      if (cquantize->fserrors == NULL)
+	cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize);
+      /* Initialize the propagated errors to zero. */
+      FMEMZERO((void FAR *) cquantize->fserrors, arraysize);
+      /* Make the error-limit table if we didn't already. */
+      if (cquantize->error_limiter == NULL)
+	init_error_limit(cinfo);
+      cquantize->on_odd_row = FALSE;
+    }
+
+  }
+  /* Zero the histogram or inverse color map, if necessary */
+  if (cquantize->needs_zeroed) {
+    for (i = 0; i < HIST_C0_ELEMS; i++) {
+      FMEMZERO((void FAR *) histogram[i],
+	       HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell));
+    }
+    cquantize->needs_zeroed = FALSE;
+  }
+}
+
+
+/*
+ * Switch to a new external colormap between output passes.
+ */
+
+METHODDEF(void)
+new_color_map_2_quant (j_decompress_ptr cinfo)
+{
+  my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize;
+
+  /* Reset the inverse color map */
+  cquantize->needs_zeroed = TRUE;
+}
+
+
+/*
+ * Module initialization routine for 2-pass color quantization.
+ */
+
+GLOBAL(void)
+jinit_2pass_quantizer (j_decompress_ptr cinfo)
+{
+  my_cquantize_ptr cquantize;
+  int i;
+
+  cquantize = (my_cquantize_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(my_cquantizer));
+  cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize;
+  cquantize->pub.start_pass = start_pass_2_quant;
+  cquantize->pub.new_color_map = new_color_map_2_quant;
+  cquantize->fserrors = NULL;	/* flag optional arrays not allocated */
+  cquantize->error_limiter = NULL;
+
+  /* Make sure jdmaster didn't give me a case I can't handle */
+  if (cinfo->out_color_components != 3)
+    ERREXIT(cinfo, JERR_NOTIMPL);
+
+  /* Allocate the histogram/inverse colormap storage */
+  cquantize->histogram = (hist3d) (*cinfo->mem->alloc_small)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, HIST_C0_ELEMS * SIZEOF(hist2d));
+  for (i = 0; i < HIST_C0_ELEMS; i++) {
+    cquantize->histogram[i] = (hist2d) (*cinfo->mem->alloc_large)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell));
+  }
+  cquantize->needs_zeroed = TRUE; /* histogram is garbage now */
+
+  /* Allocate storage for the completed colormap, if required.
+   * We do this now since it is FAR storage and may affect
+   * the memory manager's space calculations.
+   */
+  if (cinfo->enable_2pass_quant) {
+    /* Make sure color count is acceptable */
+    int desired = cinfo->desired_number_of_colors;
+    /* Lower bound on # of colors ... somewhat arbitrary as long as > 0 */
+    if (desired < 8)
+      ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 8);
+    /* Make sure colormap indexes can be represented by JSAMPLEs */
+    if (desired > MAXNUMCOLORS)
+      ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS);
+    cquantize->sv_colormap = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo,JPOOL_IMAGE, (JDIMENSION) desired, (JDIMENSION) 3);
+    cquantize->desired = desired;
+  } else
+    cquantize->sv_colormap = NULL;
+
+  /* Only F-S dithering or no dithering is supported. */
+  /* If user asks for ordered dither, give him F-S. */
+  if (cinfo->dither_mode != JDITHER_NONE)
+    cinfo->dither_mode = JDITHER_FS;
+
+  /* Allocate Floyd-Steinberg workspace if necessary.
+   * This isn't really needed until pass 2, but again it is FAR storage.
+   * Although we will cope with a later change in dither_mode,
+   * we do not promise to honor max_memory_to_use if dither_mode changes.
+   */
+  if (cinfo->dither_mode == JDITHER_FS) {
+    cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (size_t) ((cinfo->output_width + 2) * (3 * SIZEOF(FSERROR))));
+    /* Might as well create the error-limiting table too. */
+    init_error_limit(cinfo);
+  }
+}
+
+#endif /* QUANT_2PASS_SUPPORTED */
diff --git a/jpeg-8d/jutils.c b/jpeg-8d/jutils.c
new file mode 100644
index 0000000..5b16b6d
--- /dev/null
+++ b/jpeg-8d/jutils.c
@@ -0,0 +1,227 @@
+/*
+ * jutils.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2009-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains tables and miscellaneous utility routines needed
+ * for both compression and decompression.
+ * Note we prefix all global names with "j" to minimize conflicts with
+ * a surrounding application.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/*
+ * jpeg_zigzag_order[i] is the zigzag-order position of the i'th element
+ * of a DCT block read in natural order (left to right, top to bottom).
+ */
+
+#if 0				/* This table is not actually needed in v6a */
+
+const int jpeg_zigzag_order[DCTSIZE2] = {
+   0,  1,  5,  6, 14, 15, 27, 28,
+   2,  4,  7, 13, 16, 26, 29, 42,
+   3,  8, 12, 17, 25, 30, 41, 43,
+   9, 11, 18, 24, 31, 40, 44, 53,
+  10, 19, 23, 32, 39, 45, 52, 54,
+  20, 22, 33, 38, 46, 51, 55, 60,
+  21, 34, 37, 47, 50, 56, 59, 61,
+  35, 36, 48, 49, 57, 58, 62, 63
+};
+
+#endif
+
+/*
+ * jpeg_natural_order[i] is the natural-order position of the i'th element
+ * of zigzag order.
+ *
+ * When reading corrupted data, the Huffman decoders could attempt
+ * to reference an entry beyond the end of this array (if the decoded
+ * zero run length reaches past the end of the block).  To prevent
+ * wild stores without adding an inner-loop test, we put some extra
+ * "63"s after the real entries.  This will cause the extra coefficient
+ * to be stored in location 63 of the block, not somewhere random.
+ * The worst case would be a run-length of 15, which means we need 16
+ * fake entries.
+ */
+
+const int jpeg_natural_order[DCTSIZE2+16] = {
+  0,  1,  8, 16,  9,  2,  3, 10,
+ 17, 24, 32, 25, 18, 11,  4,  5,
+ 12, 19, 26, 33, 40, 48, 41, 34,
+ 27, 20, 13,  6,  7, 14, 21, 28,
+ 35, 42, 49, 56, 57, 50, 43, 36,
+ 29, 22, 15, 23, 30, 37, 44, 51,
+ 58, 59, 52, 45, 38, 31, 39, 46,
+ 53, 60, 61, 54, 47, 55, 62, 63,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
+const int jpeg_natural_order7[7*7+16] = {
+  0,  1,  8, 16,  9,  2,  3, 10,
+ 17, 24, 32, 25, 18, 11,  4,  5,
+ 12, 19, 26, 33, 40, 48, 41, 34,
+ 27, 20, 13,  6, 14, 21, 28, 35,
+ 42, 49, 50, 43, 36, 29, 22, 30,
+ 37, 44, 51, 52, 45, 38, 46, 53,
+ 54,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
+const int jpeg_natural_order6[6*6+16] = {
+  0,  1,  8, 16,  9,  2,  3, 10,
+ 17, 24, 32, 25, 18, 11,  4,  5,
+ 12, 19, 26, 33, 40, 41, 34, 27,
+ 20, 13, 21, 28, 35, 42, 43, 36,
+ 29, 37, 44, 45,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
+const int jpeg_natural_order5[5*5+16] = {
+  0,  1,  8, 16,  9,  2,  3, 10,
+ 17, 24, 32, 25, 18, 11,  4, 12,
+ 19, 26, 33, 34, 27, 20, 28, 35,
+ 36,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
+const int jpeg_natural_order4[4*4+16] = {
+  0,  1,  8, 16,  9,  2,  3, 10,
+ 17, 24, 25, 18, 11, 19, 26, 27,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
+const int jpeg_natural_order3[3*3+16] = {
+  0,  1,  8, 16,  9,  2, 10, 17,
+ 18,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
+const int jpeg_natural_order2[2*2+16] = {
+  0,  1,  8,  9,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
+
+/*
+ * Arithmetic utilities
+ */
+
+GLOBAL(long)
+jdiv_round_up (long a, long b)
+/* Compute a/b rounded up to next integer, ie, ceil(a/b) */
+/* Assumes a >= 0, b > 0 */
+{
+  return (a + b - 1L) / b;
+}
+
+
+GLOBAL(long)
+jround_up (long a, long b)
+/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */
+/* Assumes a >= 0, b > 0 */
+{
+  a += b - 1L;
+  return a - (a % b);
+}
+
+
+/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays
+ * and coefficient-block arrays.  This won't work on 80x86 because the arrays
+ * are FAR and we're assuming a small-pointer memory model.  However, some
+ * DOS compilers provide far-pointer versions of memcpy() and memset() even
+ * in the small-model libraries.  These will be used if USE_FMEM is defined.
+ * Otherwise, the routines below do it the hard way.  (The performance cost
+ * is not all that great, because these routines aren't very heavily used.)
+ */
+
+#ifndef NEED_FAR_POINTERS	/* normal case, same as regular macro */
+#define FMEMCOPY(dest,src,size)	MEMCOPY(dest,src,size)
+#else				/* 80x86 case, define if we can */
+#ifdef USE_FMEM
+#define FMEMCOPY(dest,src,size)	_fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size))
+#else
+/* This function is for use by the FMEMZERO macro defined in jpegint.h.
+ * Do not call this function directly, use the FMEMZERO macro instead.
+ */
+GLOBAL(void)
+jzero_far (void FAR * target, size_t bytestozero)
+/* Zero out a chunk of FAR memory. */
+/* This might be sample-array data, block-array data, or alloc_large data. */
+{
+  register char FAR * ptr = (char FAR *) target;
+  register size_t count;
+
+  for (count = bytestozero; count > 0; count--) {
+    *ptr++ = 0;
+  }
+}
+#endif
+#endif
+
+
+GLOBAL(void)
+jcopy_sample_rows (JSAMPARRAY input_array, int source_row,
+		   JSAMPARRAY output_array, int dest_row,
+		   int num_rows, JDIMENSION num_cols)
+/* Copy some rows of samples from one place to another.
+ * num_rows rows are copied from input_array[source_row++]
+ * to output_array[dest_row++]; these areas may overlap for duplication.
+ * The source and destination arrays must be at least as wide as num_cols.
+ */
+{
+  register JSAMPROW inptr, outptr;
+#ifdef FMEMCOPY
+  register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE));
+#else
+  register JDIMENSION count;
+#endif
+  register int row;
+
+  input_array += source_row;
+  output_array += dest_row;
+
+  for (row = num_rows; row > 0; row--) {
+    inptr = *input_array++;
+    outptr = *output_array++;
+#ifdef FMEMCOPY
+    FMEMCOPY(outptr, inptr, count);
+#else
+    for (count = num_cols; count > 0; count--)
+      *outptr++ = *inptr++;	/* needn't bother with GETJSAMPLE() here */
+#endif
+  }
+}
+
+
+GLOBAL(void)
+jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row,
+		 JDIMENSION num_blocks)
+/* Copy a row of coefficient blocks from one place to another. */
+{
+#ifdef FMEMCOPY
+  FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF)));
+#else
+  register JCOEFPTR inptr, outptr;
+  register long count;
+
+  inptr = (JCOEFPTR) input_row;
+  outptr = (JCOEFPTR) output_row;
+  for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) {
+    *outptr++ = *inptr++;
+  }
+#endif
+}
diff --git a/jpeg-8d/jversion.h b/jpeg-8d/jversion.h
new file mode 100644
index 0000000..5d49151
--- /dev/null
+++ b/jpeg-8d/jversion.h
@@ -0,0 +1,14 @@
+/*
+ * jversion.h
+ *
+ * Copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains software version identification.
+ */
+
+
+#define JVERSION	"8d  15-Jan-2012"
+
+#define JCOPYRIGHT	"Copyright (C) 2012, Thomas G. Lane, Guido Vollbeding"
diff --git a/jpeg-8d/libjpeg.map b/jpeg-8d/libjpeg.map
new file mode 100644
index 0000000..ac77dca
--- /dev/null
+++ b/jpeg-8d/libjpeg.map
@@ -0,0 +1,4 @@
+LIBJPEG_8.0 {
+  global:
+    *;
+};
diff --git a/jpeg-8d/libjpeg.txt b/jpeg-8d/libjpeg.txt
new file mode 100644
index 0000000..9702669
--- /dev/null
+++ b/jpeg-8d/libjpeg.txt
@@ -0,0 +1,3085 @@
+USING THE IJG JPEG LIBRARY
+
+Copyright (C) 1994-2011, Thomas G. Lane, Guido Vollbeding.
+This file is part of the Independent JPEG Group's software.
+For conditions of distribution and use, see the accompanying README file.
+
+
+This file describes how to use the IJG JPEG library within an application
+program.  Read it if you want to write a program that uses the library.
+
+The file example.c provides heavily commented skeleton code for calling the
+JPEG library.  Also see jpeglib.h (the include file to be used by application
+programs) for full details about data structures and function parameter lists.
+The library source code, of course, is the ultimate reference.
+
+Note that there have been *major* changes from the application interface
+presented by IJG version 4 and earlier versions.  The old design had several
+inherent limitations, and it had accumulated a lot of cruft as we added
+features while trying to minimize application-interface changes.  We have
+sacrificed backward compatibility in the version 5 rewrite, but we think the
+improvements justify this.
+
+
+TABLE OF CONTENTS
+-----------------
+
+Overview:
+	Functions provided by the library
+	Outline of typical usage
+Basic library usage:
+	Data formats
+	Compression details
+	Decompression details
+	Mechanics of usage: include files, linking, etc
+Advanced features:
+	Compression parameter selection
+	Decompression parameter selection
+	Special color spaces
+	Error handling
+	Compressed data handling (source and destination managers)
+	I/O suspension
+	Progressive JPEG support
+	Buffered-image mode
+	Abbreviated datastreams and multiple images
+	Special markers
+	Raw (downsampled) image data
+	Really raw data: DCT coefficients
+	Progress monitoring
+	Memory management
+	Memory usage
+	Library compile-time options
+	Portability considerations
+	Notes for MS-DOS implementors
+
+You should read at least the overview and basic usage sections before trying
+to program with the library.  The sections on advanced features can be read
+if and when you need them.
+
+
+OVERVIEW
+========
+
+Functions provided by the library
+---------------------------------
+
+The IJG JPEG library provides C code to read and write JPEG-compressed image
+files.  The surrounding application program receives or supplies image data a
+scanline at a time, using a straightforward uncompressed image format.  All
+details of color conversion and other preprocessing/postprocessing can be
+handled by the library.
+
+The library includes a substantial amount of code that is not covered by the
+JPEG standard but is necessary for typical applications of JPEG.  These
+functions preprocess the image before JPEG compression or postprocess it after
+decompression.  They include colorspace conversion, downsampling/upsampling,
+and color quantization.  The application indirectly selects use of this code
+by specifying the format in which it wishes to supply or receive image data.
+For example, if colormapped output is requested, then the decompression
+library automatically invokes color quantization.
+
+A wide range of quality vs. speed tradeoffs are possible in JPEG processing,
+and even more so in decompression postprocessing.  The decompression library
+provides multiple implementations that cover most of the useful tradeoffs,
+ranging from very-high-quality down to fast-preview operation.  On the
+compression side we have generally not provided low-quality choices, since
+compression is normally less time-critical.  It should be understood that the
+low-quality modes may not meet the JPEG standard's accuracy requirements;
+nonetheless, they are useful for viewers.
+
+A word about functions *not* provided by the library.  We handle a subset of
+the ISO JPEG standard; most baseline, extended-sequential, and progressive
+JPEG processes are supported.  (Our subset includes all features now in common
+use.)  Unsupported ISO options include:
+	* Hierarchical storage
+	* Lossless JPEG
+	* DNL marker
+	* Nonintegral subsampling ratios
+We support both 8- and 12-bit data precision, but this is a compile-time
+choice rather than a run-time choice; hence it is difficult to use both
+precisions in a single application.
+
+By itself, the library handles only interchange JPEG datastreams --- in
+particular the widely used JFIF file format.  The library can be used by
+surrounding code to process interchange or abbreviated JPEG datastreams that
+are embedded in more complex file formats.  (For example, this library is
+used by the free LIBTIFF library to support JPEG compression in TIFF.)
+
+
+Outline of typical usage
+------------------------
+
+The rough outline of a JPEG compression operation is:
+
+	Allocate and initialize a JPEG compression object
+	Specify the destination for the compressed data (eg, a file)
+	Set parameters for compression, including image size & colorspace
+	jpeg_start_compress(...);
+	while (scan lines remain to be written)
+		jpeg_write_scanlines(...);
+	jpeg_finish_compress(...);
+	Release the JPEG compression object
+
+A JPEG compression object holds parameters and working state for the JPEG
+library.  We make creation/destruction of the object separate from starting
+or finishing compression of an image; the same object can be re-used for a
+series of image compression operations.  This makes it easy to re-use the
+same parameter settings for a sequence of images.  Re-use of a JPEG object
+also has important implications for processing abbreviated JPEG datastreams,
+as discussed later.
+
+The image data to be compressed is supplied to jpeg_write_scanlines() from
+in-memory buffers.  If the application is doing file-to-file compression,
+reading image data from the source file is the application's responsibility.
+The library emits compressed data by calling a "data destination manager",
+which typically will write the data into a file; but the application can
+provide its own destination manager to do something else.
+
+Similarly, the rough outline of a JPEG decompression operation is:
+
+	Allocate and initialize a JPEG decompression object
+	Specify the source of the compressed data (eg, a file)
+	Call jpeg_read_header() to obtain image info
+	Set parameters for decompression
+	jpeg_start_decompress(...);
+	while (scan lines remain to be read)
+		jpeg_read_scanlines(...);
+	jpeg_finish_decompress(...);
+	Release the JPEG decompression object
+
+This is comparable to the compression outline except that reading the
+datastream header is a separate step.  This is helpful because information
+about the image's size, colorspace, etc is available when the application
+selects decompression parameters.  For example, the application can choose an
+output scaling ratio that will fit the image into the available screen size.
+
+The decompression library obtains compressed data by calling a data source
+manager, which typically will read the data from a file; but other behaviors
+can be obtained with a custom source manager.  Decompressed data is delivered
+into in-memory buffers passed to jpeg_read_scanlines().
+
+It is possible to abort an incomplete compression or decompression operation
+by calling jpeg_abort(); or, if you do not need to retain the JPEG object,
+simply release it by calling jpeg_destroy().
+
+JPEG compression and decompression objects are two separate struct types.
+However, they share some common fields, and certain routines such as
+jpeg_destroy() can work on either type of object.
+
+The JPEG library has no static variables: all state is in the compression
+or decompression object.  Therefore it is possible to process multiple
+compression and decompression operations concurrently, using multiple JPEG
+objects.
+
+Both compression and decompression can be done in an incremental memory-to-
+memory fashion, if suitable source/destination managers are used.  See the
+section on "I/O suspension" for more details.
+
+
+BASIC LIBRARY USAGE
+===================
+
+Data formats
+------------
+
+Before diving into procedural details, it is helpful to understand the
+image data format that the JPEG library expects or returns.
+
+The standard input image format is a rectangular array of pixels, with each
+pixel having the same number of "component" or "sample" values (color
+channels).  You must specify how many components there are and the colorspace
+interpretation of the components.  Most applications will use RGB data
+(three components per pixel) or grayscale data (one component per pixel).
+PLEASE NOTE THAT RGB DATA IS THREE SAMPLES PER PIXEL, GRAYSCALE ONLY ONE.
+A remarkable number of people manage to miss this, only to find that their
+programs don't work with grayscale JPEG files.
+
+There is no provision for colormapped input.  JPEG files are always full-color
+or full grayscale (or sometimes another colorspace such as CMYK).  You can
+feed in a colormapped image by expanding it to full-color format.  However
+JPEG often doesn't work very well with source data that has been colormapped,
+because of dithering noise.  This is discussed in more detail in the JPEG FAQ
+and the other references mentioned in the README file.
+
+Pixels are stored by scanlines, with each scanline running from left to
+right.  The component values for each pixel are adjacent in the row; for
+example, R,G,B,R,G,B,R,G,B,... for 24-bit RGB color.  Each scanline is an
+array of data type JSAMPLE --- which is typically "unsigned char", unless
+you've changed jmorecfg.h.  (You can also change the RGB pixel layout, say
+to B,G,R order, by modifying jmorecfg.h.  But see the restrictions listed in
+that file before doing so.)
+
+A 2-D array of pixels is formed by making a list of pointers to the starts of
+scanlines; so the scanlines need not be physically adjacent in memory.  Even
+if you process just one scanline at a time, you must make a one-element
+pointer array to conform to this structure.  Pointers to JSAMPLE rows are of
+type JSAMPROW, and the pointer to the pointer array is of type JSAMPARRAY.
+
+The library accepts or supplies one or more complete scanlines per call.
+It is not possible to process part of a row at a time.  Scanlines are always
+processed top-to-bottom.  You can process an entire image in one call if you
+have it all in memory, but usually it's simplest to process one scanline at
+a time.
+
+For best results, source data values should have the precision specified by
+BITS_IN_JSAMPLE (normally 8 bits).  For instance, if you choose to compress
+data that's only 6 bits/channel, you should left-justify each value in a
+byte before passing it to the compressor.  If you need to compress data
+that has more than 8 bits/channel, compile with BITS_IN_JSAMPLE = 12.
+(See "Library compile-time options", later.)
+
+
+The data format returned by the decompressor is the same in all details,
+except that colormapped output is supported.  (Again, a JPEG file is never
+colormapped.  But you can ask the decompressor to perform on-the-fly color
+quantization to deliver colormapped output.)  If you request colormapped
+output then the returned data array contains a single JSAMPLE per pixel;
+its value is an index into a color map.  The color map is represented as
+a 2-D JSAMPARRAY in which each row holds the values of one color component,
+that is, colormap[i][j] is the value of the i'th color component for pixel
+value (map index) j.  Note that since the colormap indexes are stored in
+JSAMPLEs, the maximum number of colors is limited by the size of JSAMPLE
+(ie, at most 256 colors for an 8-bit JPEG library).
+
+
+Compression details
+-------------------
+
+Here we revisit the JPEG compression outline given in the overview.
+
+1. Allocate and initialize a JPEG compression object.
+
+A JPEG compression object is a "struct jpeg_compress_struct".  (It also has
+a bunch of subsidiary structures which are allocated via malloc(), but the
+application doesn't control those directly.)  This struct can be just a local
+variable in the calling routine, if a single routine is going to execute the
+whole JPEG compression sequence.  Otherwise it can be static or allocated
+from malloc().
+
+You will also need a structure representing a JPEG error handler.  The part
+of this that the library cares about is a "struct jpeg_error_mgr".  If you
+are providing your own error handler, you'll typically want to embed the
+jpeg_error_mgr struct in a larger structure; this is discussed later under
+"Error handling".  For now we'll assume you are just using the default error
+handler.  The default error handler will print JPEG error/warning messages
+on stderr, and it will call exit() if a fatal error occurs.
+
+You must initialize the error handler structure, store a pointer to it into
+the JPEG object's "err" field, and then call jpeg_create_compress() to
+initialize the rest of the JPEG object.
+
+Typical code for this step, if you are using the default error handler, is
+
+	struct jpeg_compress_struct cinfo;
+	struct jpeg_error_mgr jerr;
+	...
+	cinfo.err = jpeg_std_error(&jerr);
+	jpeg_create_compress(&cinfo);
+
+jpeg_create_compress allocates a small amount of memory, so it could fail
+if you are out of memory.  In that case it will exit via the error handler;
+that's why the error handler must be initialized first.
+
+
+2. Specify the destination for the compressed data (eg, a file).
+
+As previously mentioned, the JPEG library delivers compressed data to a
+"data destination" module.  The library includes one data destination
+module which knows how to write to a stdio stream.  You can use your own
+destination module if you want to do something else, as discussed later.
+
+If you use the standard destination module, you must open the target stdio
+stream beforehand.  Typical code for this step looks like:
+
+	FILE * outfile;
+	...
+	if ((outfile = fopen(filename, "wb")) == NULL) {
+	    fprintf(stderr, "can't open %s\n", filename);
+	    exit(1);
+	}
+	jpeg_stdio_dest(&cinfo, outfile);
+
+where the last line invokes the standard destination module.
+
+WARNING: it is critical that the binary compressed data be delivered to the
+output file unchanged.  On non-Unix systems the stdio library may perform
+newline translation or otherwise corrupt binary data.  To suppress this
+behavior, you may need to use a "b" option to fopen (as shown above), or use
+setmode() or another routine to put the stdio stream in binary mode.  See
+cjpeg.c and djpeg.c for code that has been found to work on many systems.
+
+You can select the data destination after setting other parameters (step 3),
+if that's more convenient.  You may not change the destination between
+calling jpeg_start_compress() and jpeg_finish_compress().
+
+
+3. Set parameters for compression, including image size & colorspace.
+
+You must supply information about the source image by setting the following
+fields in the JPEG object (cinfo structure):
+
+	image_width		Width of image, in pixels
+	image_height		Height of image, in pixels
+	input_components	Number of color channels (samples per pixel)
+	in_color_space		Color space of source image
+
+The image dimensions are, hopefully, obvious.  JPEG supports image dimensions
+of 1 to 64K pixels in either direction.  The input color space is typically
+RGB or grayscale, and input_components is 3 or 1 accordingly.  (See "Special
+color spaces", later, for more info.)  The in_color_space field must be
+assigned one of the J_COLOR_SPACE enum constants, typically JCS_RGB or
+JCS_GRAYSCALE.
+
+JPEG has a large number of compression parameters that determine how the
+image is encoded.  Most applications don't need or want to know about all
+these parameters.  You can set all the parameters to reasonable defaults by
+calling jpeg_set_defaults(); then, if there are particular values you want
+to change, you can do so after that.  The "Compression parameter selection"
+section tells about all the parameters.
+
+You must set in_color_space correctly before calling jpeg_set_defaults(),
+because the defaults depend on the source image colorspace.  However the
+other three source image parameters need not be valid until you call
+jpeg_start_compress().  There's no harm in calling jpeg_set_defaults() more
+than once, if that happens to be convenient.
+
+Typical code for a 24-bit RGB source image is
+
+	cinfo.image_width = Width; 	/* image width and height, in pixels */
+	cinfo.image_height = Height;
+	cinfo.input_components = 3;	/* # of color components per pixel */
+	cinfo.in_color_space = JCS_RGB; /* colorspace of input image */
+
+	jpeg_set_defaults(&cinfo);
+	/* Make optional parameter settings here */
+
+
+4. jpeg_start_compress(...);
+
+After you have established the data destination and set all the necessary
+source image info and other parameters, call jpeg_start_compress() to begin
+a compression cycle.  This will initialize internal state, allocate working
+storage, and emit the first few bytes of the JPEG datastream header.
+
+Typical code:
+
+	jpeg_start_compress(&cinfo, TRUE);
+
+The "TRUE" parameter ensures that a complete JPEG interchange datastream
+will be written.  This is appropriate in most cases.  If you think you might
+want to use an abbreviated datastream, read the section on abbreviated
+datastreams, below.
+
+Once you have called jpeg_start_compress(), you may not alter any JPEG
+parameters or other fields of the JPEG object until you have completed
+the compression cycle.
+
+
+5. while (scan lines remain to be written)
+	jpeg_write_scanlines(...);
+
+Now write all the required image data by calling jpeg_write_scanlines()
+one or more times.  You can pass one or more scanlines in each call, up
+to the total image height.  In most applications it is convenient to pass
+just one or a few scanlines at a time.  The expected format for the passed
+data is discussed under "Data formats", above.
+
+Image data should be written in top-to-bottom scanline order.  The JPEG spec
+contains some weasel wording about how top and bottom are application-defined
+terms (a curious interpretation of the English language...) but if you want
+your files to be compatible with everyone else's, you WILL use top-to-bottom
+order.  If the source data must be read in bottom-to-top order, you can use
+the JPEG library's virtual array mechanism to invert the data efficiently.
+Examples of this can be found in the sample application cjpeg.
+
+The library maintains a count of the number of scanlines written so far
+in the next_scanline field of the JPEG object.  Usually you can just use
+this variable as the loop counter, so that the loop test looks like
+"while (cinfo.next_scanline < cinfo.image_height)".
+
+Code for this step depends heavily on the way that you store the source data.
+example.c shows the following code for the case of a full-size 2-D source
+array containing 3-byte RGB pixels:
+
+	JSAMPROW row_pointer[1];	/* pointer to a single row */
+	int row_stride;			/* physical row width in buffer */
+
+	row_stride = image_width * 3;	/* JSAMPLEs per row in image_buffer */
+
+	while (cinfo.next_scanline < cinfo.image_height) {
+	    row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride];
+	    jpeg_write_scanlines(&cinfo, row_pointer, 1);
+	}
+
+jpeg_write_scanlines() returns the number of scanlines actually written.
+This will normally be equal to the number passed in, so you can usually
+ignore the return value.  It is different in just two cases:
+  * If you try to write more scanlines than the declared image height,
+    the additional scanlines are ignored.
+  * If you use a suspending data destination manager, output buffer overrun
+    will cause the compressor to return before accepting all the passed lines.
+    This feature is discussed under "I/O suspension", below.  The normal
+    stdio destination manager will NOT cause this to happen.
+In any case, the return value is the same as the change in the value of
+next_scanline.
+
+
+6. jpeg_finish_compress(...);
+
+After all the image data has been written, call jpeg_finish_compress() to
+complete the compression cycle.  This step is ESSENTIAL to ensure that the
+last bufferload of data is written to the data destination.
+jpeg_finish_compress() also releases working memory associated with the JPEG
+object.
+
+Typical code:
+
+	jpeg_finish_compress(&cinfo);
+
+If using the stdio destination manager, don't forget to close the output
+stdio stream (if necessary) afterwards.
+
+If you have requested a multi-pass operating mode, such as Huffman code
+optimization, jpeg_finish_compress() will perform the additional passes using
+data buffered by the first pass.  In this case jpeg_finish_compress() may take
+quite a while to complete.  With the default compression parameters, this will
+not happen.
+
+It is an error to call jpeg_finish_compress() before writing the necessary
+total number of scanlines.  If you wish to abort compression, call
+jpeg_abort() as discussed below.
+
+After completing a compression cycle, you may dispose of the JPEG object
+as discussed next, or you may use it to compress another image.  In that case
+return to step 2, 3, or 4 as appropriate.  If you do not change the
+destination manager, the new datastream will be written to the same target.
+If you do not change any JPEG parameters, the new datastream will be written
+with the same parameters as before.  Note that you can change the input image
+dimensions freely between cycles, but if you change the input colorspace, you
+should call jpeg_set_defaults() to adjust for the new colorspace; and then
+you'll need to repeat all of step 3.
+
+
+7. Release the JPEG compression object.
+
+When you are done with a JPEG compression object, destroy it by calling
+jpeg_destroy_compress().  This will free all subsidiary memory (regardless of
+the previous state of the object).  Or you can call jpeg_destroy(), which
+works for either compression or decompression objects --- this may be more
+convenient if you are sharing code between compression and decompression
+cases.  (Actually, these routines are equivalent except for the declared type
+of the passed pointer.  To avoid gripes from ANSI C compilers, jpeg_destroy()
+should be passed a j_common_ptr.)
+
+If you allocated the jpeg_compress_struct structure from malloc(), freeing
+it is your responsibility --- jpeg_destroy() won't.  Ditto for the error
+handler structure.
+
+Typical code:
+
+	jpeg_destroy_compress(&cinfo);
+
+
+8. Aborting.
+
+If you decide to abort a compression cycle before finishing, you can clean up
+in either of two ways:
+
+* If you don't need the JPEG object any more, just call
+  jpeg_destroy_compress() or jpeg_destroy() to release memory.  This is
+  legitimate at any point after calling jpeg_create_compress() --- in fact,
+  it's safe even if jpeg_create_compress() fails.
+
+* If you want to re-use the JPEG object, call jpeg_abort_compress(), or call
+  jpeg_abort() which works on both compression and decompression objects.
+  This will return the object to an idle state, releasing any working memory.
+  jpeg_abort() is allowed at any time after successful object creation.
+
+Note that cleaning up the data destination, if required, is your
+responsibility; neither of these routines will call term_destination().
+(See "Compressed data handling", below, for more about that.)
+
+jpeg_destroy() and jpeg_abort() are the only safe calls to make on a JPEG
+object that has reported an error by calling error_exit (see "Error handling"
+for more info).  The internal state of such an object is likely to be out of
+whack.  Either of these two routines will return the object to a known state.
+
+
+Decompression details
+---------------------
+
+Here we revisit the JPEG decompression outline given in the overview.
+
+1. Allocate and initialize a JPEG decompression object.
+
+This is just like initialization for compression, as discussed above,
+except that the object is a "struct jpeg_decompress_struct" and you
+call jpeg_create_decompress().  Error handling is exactly the same.
+
+Typical code:
+
+	struct jpeg_decompress_struct cinfo;
+	struct jpeg_error_mgr jerr;
+	...
+	cinfo.err = jpeg_std_error(&jerr);
+	jpeg_create_decompress(&cinfo);
+
+(Both here and in the IJG code, we usually use variable name "cinfo" for
+both compression and decompression objects.)
+
+
+2. Specify the source of the compressed data (eg, a file).
+
+As previously mentioned, the JPEG library reads compressed data from a "data
+source" module.  The library includes one data source module which knows how
+to read from a stdio stream.  You can use your own source module if you want
+to do something else, as discussed later.
+
+If you use the standard source module, you must open the source stdio stream
+beforehand.  Typical code for this step looks like:
+
+	FILE * infile;
+	...
+	if ((infile = fopen(filename, "rb")) == NULL) {
+	    fprintf(stderr, "can't open %s\n", filename);
+	    exit(1);
+	}
+	jpeg_stdio_src(&cinfo, infile);
+
+where the last line invokes the standard source module.
+
+WARNING: it is critical that the binary compressed data be read unchanged.
+On non-Unix systems the stdio library may perform newline translation or
+otherwise corrupt binary data.  To suppress this behavior, you may need to use
+a "b" option to fopen (as shown above), or use setmode() or another routine to
+put the stdio stream in binary mode.  See cjpeg.c and djpeg.c for code that
+has been found to work on many systems.
+
+You may not change the data source between calling jpeg_read_header() and
+jpeg_finish_decompress().  If you wish to read a series of JPEG images from
+a single source file, you should repeat the jpeg_read_header() to
+jpeg_finish_decompress() sequence without reinitializing either the JPEG
+object or the data source module; this prevents buffered input data from
+being discarded.
+
+
+3. Call jpeg_read_header() to obtain image info.
+
+Typical code for this step is just
+
+	jpeg_read_header(&cinfo, TRUE);
+
+This will read the source datastream header markers, up to the beginning
+of the compressed data proper.  On return, the image dimensions and other
+info have been stored in the JPEG object.  The application may wish to
+consult this information before selecting decompression parameters.
+
+More complex code is necessary if
+  * A suspending data source is used --- in that case jpeg_read_header()
+    may return before it has read all the header data.  See "I/O suspension",
+    below.  The normal stdio source manager will NOT cause this to happen.
+  * Abbreviated JPEG files are to be processed --- see the section on
+    abbreviated datastreams.  Standard applications that deal only in
+    interchange JPEG files need not be concerned with this case either.
+
+It is permissible to stop at this point if you just wanted to find out the
+image dimensions and other header info for a JPEG file.  In that case,
+call jpeg_destroy() when you are done with the JPEG object, or call
+jpeg_abort() to return it to an idle state before selecting a new data
+source and reading another header.
+
+
+4. Set parameters for decompression.
+
+jpeg_read_header() sets appropriate default decompression parameters based on
+the properties of the image (in particular, its colorspace).  However, you
+may well want to alter these defaults before beginning the decompression.
+For example, the default is to produce full color output from a color file.
+If you want colormapped output you must ask for it.  Other options allow the
+returned image to be scaled and allow various speed/quality tradeoffs to be
+selected.  "Decompression parameter selection", below, gives details.
+
+If the defaults are appropriate, nothing need be done at this step.
+
+Note that all default values are set by each call to jpeg_read_header().
+If you reuse a decompression object, you cannot expect your parameter
+settings to be preserved across cycles, as you can for compression.
+You must set desired parameter values each time.
+
+
+5. jpeg_start_decompress(...);
+
+Once the parameter values are satisfactory, call jpeg_start_decompress() to
+begin decompression.  This will initialize internal state, allocate working
+memory, and prepare for returning data.
+
+Typical code is just
+
+	jpeg_start_decompress(&cinfo);
+
+If you have requested a multi-pass operating mode, such as 2-pass color
+quantization, jpeg_start_decompress() will do everything needed before data
+output can begin.  In this case jpeg_start_decompress() may take quite a while
+to complete.  With a single-scan (non progressive) JPEG file and default
+decompression parameters, this will not happen; jpeg_start_decompress() will
+return quickly.
+
+After this call, the final output image dimensions, including any requested
+scaling, are available in the JPEG object; so is the selected colormap, if
+colormapped output has been requested.  Useful fields include
+
+	output_width		image width and height, as scaled
+	output_height
+	out_color_components	# of color components in out_color_space
+	output_components	# of color components returned per pixel
+	colormap		the selected colormap, if any
+	actual_number_of_colors		number of entries in colormap
+
+output_components is 1 (a colormap index) when quantizing colors; otherwise it
+equals out_color_components.  It is the number of JSAMPLE values that will be
+emitted per pixel in the output arrays.
+
+Typically you will need to allocate data buffers to hold the incoming image.
+You will need output_width * output_components JSAMPLEs per scanline in your
+output buffer, and a total of output_height scanlines will be returned.
+
+Note: if you are using the JPEG library's internal memory manager to allocate
+data buffers (as djpeg does), then the manager's protocol requires that you
+request large buffers *before* calling jpeg_start_decompress().  This is a
+little tricky since the output_XXX fields are not normally valid then.  You
+can make them valid by calling jpeg_calc_output_dimensions() after setting the
+relevant parameters (scaling, output color space, and quantization flag).
+
+
+6. while (scan lines remain to be read)
+	jpeg_read_scanlines(...);
+
+Now you can read the decompressed image data by calling jpeg_read_scanlines()
+one or more times.  At each call, you pass in the maximum number of scanlines
+to be read (ie, the height of your working buffer); jpeg_read_scanlines()
+will return up to that many lines.  The return value is the number of lines
+actually read.  The format of the returned data is discussed under "Data
+formats", above.  Don't forget that grayscale and color JPEGs will return
+different data formats!
+
+Image data is returned in top-to-bottom scanline order.  If you must write
+out the image in bottom-to-top order, you can use the JPEG library's virtual
+array mechanism to invert the data efficiently.  Examples of this can be
+found in the sample application djpeg.
+
+The library maintains a count of the number of scanlines returned so far
+in the output_scanline field of the JPEG object.  Usually you can just use
+this variable as the loop counter, so that the loop test looks like
+"while (cinfo.output_scanline < cinfo.output_height)".  (Note that the test
+should NOT be against image_height, unless you never use scaling.  The
+image_height field is the height of the original unscaled image.)
+The return value always equals the change in the value of output_scanline.
+
+If you don't use a suspending data source, it is safe to assume that
+jpeg_read_scanlines() reads at least one scanline per call, until the
+bottom of the image has been reached.
+
+If you use a buffer larger than one scanline, it is NOT safe to assume that
+jpeg_read_scanlines() fills it.  (The current implementation returns only a
+few scanlines per call, no matter how large a buffer you pass.)  So you must
+always provide a loop that calls jpeg_read_scanlines() repeatedly until the
+whole image has been read.
+
+
+7. jpeg_finish_decompress(...);
+
+After all the image data has been read, call jpeg_finish_decompress() to
+complete the decompression cycle.  This causes working memory associated
+with the JPEG object to be released.
+
+Typical code:
+
+	jpeg_finish_decompress(&cinfo);
+
+If using the stdio source manager, don't forget to close the source stdio
+stream if necessary.
+
+It is an error to call jpeg_finish_decompress() before reading the correct
+total number of scanlines.  If you wish to abort decompression, call
+jpeg_abort() as discussed below.
+
+After completing a decompression cycle, you may dispose of the JPEG object as
+discussed next, or you may use it to decompress another image.  In that case
+return to step 2 or 3 as appropriate.  If you do not change the source
+manager, the next image will be read from the same source.
+
+
+8. Release the JPEG decompression object.
+
+When you are done with a JPEG decompression object, destroy it by calling
+jpeg_destroy_decompress() or jpeg_destroy().  The previous discussion of
+destroying compression objects applies here too.
+
+Typical code:
+
+	jpeg_destroy_decompress(&cinfo);
+
+
+9. Aborting.
+
+You can abort a decompression cycle by calling jpeg_destroy_decompress() or
+jpeg_destroy() if you don't need the JPEG object any more, or
+jpeg_abort_decompress() or jpeg_abort() if you want to reuse the object.
+The previous discussion of aborting compression cycles applies here too.
+
+
+Mechanics of usage: include files, linking, etc
+-----------------------------------------------
+
+Applications using the JPEG library should include the header file jpeglib.h
+to obtain declarations of data types and routines.  Before including
+jpeglib.h, include system headers that define at least the typedefs FILE and
+size_t.  On ANSI-conforming systems, including <stdio.h> is sufficient; on
+older Unix systems, you may need <sys/types.h> to define size_t.
+
+If the application needs to refer to individual JPEG library error codes, also
+include jerror.h to define those symbols.
+
+jpeglib.h indirectly includes the files jconfig.h and jmorecfg.h.  If you are
+installing the JPEG header files in a system directory, you will want to
+install all four files: jpeglib.h, jerror.h, jconfig.h, jmorecfg.h.
+
+The most convenient way to include the JPEG code into your executable program
+is to prepare a library file ("libjpeg.a", or a corresponding name on non-Unix
+machines) and reference it at your link step.  If you use only half of the
+library (only compression or only decompression), only that much code will be
+included from the library, unless your linker is hopelessly brain-damaged.
+The supplied makefiles build libjpeg.a automatically (see install.txt).
+
+While you can build the JPEG library as a shared library if the whim strikes
+you, we don't really recommend it.  The trouble with shared libraries is that
+at some point you'll probably try to substitute a new version of the library
+without recompiling the calling applications.  That generally doesn't work
+because the parameter struct declarations usually change with each new
+version.  In other words, the library's API is *not* guaranteed binary
+compatible across versions; we only try to ensure source-code compatibility.
+(In hindsight, it might have been smarter to hide the parameter structs from
+applications and introduce a ton of access functions instead.  Too late now,
+however.)
+
+On some systems your application may need to set up a signal handler to ensure
+that temporary files are deleted if the program is interrupted.  This is most
+critical if you are on MS-DOS and use the jmemdos.c memory manager back end;
+it will try to grab extended memory for temp files, and that space will NOT be
+freed automatically.  See cjpeg.c or djpeg.c for an example signal handler.
+
+It may be worth pointing out that the core JPEG library does not actually
+require the stdio library: only the default source/destination managers and
+error handler need it.  You can use the library in a stdio-less environment
+if you replace those modules and use jmemnobs.c (or another memory manager of
+your own devising).  More info about the minimum system library requirements
+may be found in jinclude.h.
+
+
+ADVANCED FEATURES
+=================
+
+Compression parameter selection
+-------------------------------
+
+This section describes all the optional parameters you can set for JPEG
+compression, as well as the "helper" routines provided to assist in this
+task.  Proper setting of some parameters requires detailed understanding
+of the JPEG standard; if you don't know what a parameter is for, it's best
+not to mess with it!  See REFERENCES in the README file for pointers to
+more info about JPEG.
+
+It's a good idea to call jpeg_set_defaults() first, even if you plan to set
+all the parameters; that way your code is more likely to work with future JPEG
+libraries that have additional parameters.  For the same reason, we recommend
+you use a helper routine where one is provided, in preference to twiddling
+cinfo fields directly.
+
+The helper routines are:
+
+jpeg_set_defaults (j_compress_ptr cinfo)
+	This routine sets all JPEG parameters to reasonable defaults, using
+	only the input image's color space (field in_color_space, which must
+	already be set in cinfo).  Many applications will only need to use
+	this routine and perhaps jpeg_set_quality().
+
+jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
+	Sets the JPEG file's colorspace (field jpeg_color_space) as specified,
+	and sets other color-space-dependent parameters appropriately.  See
+	"Special color spaces", below, before using this.  A large number of
+	parameters, including all per-component parameters, are set by this
+	routine; if you want to twiddle individual parameters you should call
+	jpeg_set_colorspace() before rather than after.
+
+jpeg_default_colorspace (j_compress_ptr cinfo)
+	Selects an appropriate JPEG colorspace based on cinfo->in_color_space,
+	and calls jpeg_set_colorspace().  This is actually a subroutine of
+	jpeg_set_defaults().  It's broken out in case you want to change
+	just the colorspace-dependent JPEG parameters.
+
+jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline)
+	Constructs JPEG quantization tables appropriate for the indicated
+	quality setting.  The quality value is expressed on the 0..100 scale
+	recommended by IJG (cjpeg's "-quality" switch uses this routine).
+	Note that the exact mapping from quality values to tables may change
+	in future IJG releases as more is learned about DCT quantization.
+	If the force_baseline parameter is TRUE, then the quantization table
+	entries are constrained to the range 1..255 for full JPEG baseline
+	compatibility.  In the current implementation, this only makes a
+	difference for quality settings below 25, and it effectively prevents
+	very small/low quality files from being generated.  The IJG decoder
+	is capable of reading the non-baseline files generated at low quality
+	settings when force_baseline is FALSE, but other decoders may not be.
+
+jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
+			 boolean force_baseline)
+	Same as jpeg_set_quality() except that the generated tables are the
+	sample tables given in the JPEC spec section K.1, multiplied by the
+	specified scale factor (which is expressed as a percentage; thus
+	scale_factor = 100 reproduces the spec's tables).  Note that larger
+	scale factors give lower quality.  This entry point is useful for
+	conforming to the Adobe PostScript DCT conventions, but we do not
+	recommend linear scaling as a user-visible quality scale otherwise.
+	force_baseline again constrains the computed table entries to 1..255.
+
+int jpeg_quality_scaling (int quality)
+	Converts a value on the IJG-recommended quality scale to a linear
+	scaling percentage.  Note that this routine may change or go away
+	in future releases --- IJG may choose to adopt a scaling method that
+	can't be expressed as a simple scalar multiplier, in which case the
+	premise of this routine collapses.  Caveat user.
+
+jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline)
+	Set default quantization tables with linear q_scale_factor[] values
+	(see below).
+
+jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
+		      const unsigned int *basic_table,
+		      int scale_factor, boolean force_baseline)
+	Allows an arbitrary quantization table to be created.  which_tbl
+	indicates which table slot to fill.  basic_table points to an array
+	of 64 unsigned ints given in normal array order.  These values are
+	multiplied by scale_factor/100 and then clamped to the range 1..65535
+	(or to 1..255 if force_baseline is TRUE).
+	CAUTION: prior to library version 6a, jpeg_add_quant_table expected
+	the basic table to be given in JPEG zigzag order.  If you need to
+	write code that works with either older or newer versions of this
+	routine, you must check the library version number.  Something like
+	"#if JPEG_LIB_VERSION >= 61" is the right test.
+
+jpeg_simple_progression (j_compress_ptr cinfo)
+	Generates a default scan script for writing a progressive-JPEG file.
+	This is the recommended method of creating a progressive file,
+	unless you want to make a custom scan sequence.  You must ensure that
+	the JPEG color space is set correctly before calling this routine.
+
+
+Compression parameters (cinfo fields) include:
+
+int block_size
+	Set DCT block size.  All N from 1 to 16 are possible.
+	Default is 8 (baseline format).
+	Larger values produce higher compression,
+	smaller values produce higher quality.
+	An exact DCT stage is possible with 1 or 2.
+	With the default quality of 75 and default Luminance qtable
+	the DCT+Quantization stage is lossless for value 1.
+	Note that values other than 8 require a SmartScale capable decoder,
+	introduced with IJG JPEG 8.  Setting the block_size parameter for
+	compression works with version 8c and later.
+
+J_DCT_METHOD dct_method
+	Selects the algorithm used for the DCT step.  Choices are:
+		JDCT_ISLOW: slow but accurate integer algorithm
+		JDCT_IFAST: faster, less accurate integer method
+		JDCT_FLOAT: floating-point method
+		JDCT_DEFAULT: default method (normally JDCT_ISLOW)
+		JDCT_FASTEST: fastest method (normally JDCT_IFAST)
+	The FLOAT method is very slightly more accurate than the ISLOW method,
+	but may give different results on different machines due to varying
+	roundoff behavior.  The integer methods should give the same results
+	on all machines.  On machines with sufficiently fast FP hardware, the
+	floating-point method may also be the fastest.  The IFAST method is
+	considerably less accurate than the other two; its use is not
+	recommended if high quality is a concern.  JDCT_DEFAULT and
+	JDCT_FASTEST are macros configurable by each installation.
+
+unsigned int scale_num, scale_denom
+	Scale the image by the fraction scale_num/scale_denom.  Default is
+	1/1, or no scaling.  Currently, the supported scaling ratios are
+	M/N with all N from 1 to 16, where M is the destination DCT size,
+	which is 8 by default (see block_size parameter above).
+	(The library design allows for arbitrary scaling ratios but this
+	is not likely to be implemented any time soon.)
+
+J_COLOR_SPACE jpeg_color_space
+int num_components
+	The JPEG color space and corresponding number of components; see
+	"Special color spaces", below, for more info.  We recommend using
+	jpeg_set_color_space() if you want to change these.
+
+boolean optimize_coding
+	TRUE causes the compressor to compute optimal Huffman coding tables
+	for the image.  This requires an extra pass over the data and
+	therefore costs a good deal of space and time.  The default is
+	FALSE, which tells the compressor to use the supplied or default
+	Huffman tables.  In most cases optimal tables save only a few percent
+	of file size compared to the default tables.  Note that when this is
+	TRUE, you need not supply Huffman tables at all, and any you do
+	supply will be overwritten.
+
+unsigned int restart_interval
+int restart_in_rows
+	To emit restart markers in the JPEG file, set one of these nonzero.
+	Set restart_interval to specify the exact interval in MCU blocks.
+	Set restart_in_rows to specify the interval in MCU rows.  (If
+	restart_in_rows is not 0, then restart_interval is set after the
+	image width in MCUs is computed.)  Defaults are zero (no restarts).
+	One restart marker per MCU row is often a good choice.
+	NOTE: the overhead of restart markers is higher in grayscale JPEG
+	files than in color files, and MUCH higher in progressive JPEGs.
+	If you use restarts, you may want to use larger intervals in those
+	cases.
+
+const jpeg_scan_info * scan_info
+int num_scans
+	By default, scan_info is NULL; this causes the compressor to write a
+	single-scan sequential JPEG file.  If not NULL, scan_info points to
+	an array of scan definition records of length num_scans.  The
+	compressor will then write a JPEG file having one scan for each scan
+	definition record.  This is used to generate noninterleaved or
+	progressive JPEG files.  The library checks that the scan array
+	defines a valid JPEG scan sequence.  (jpeg_simple_progression creates
+	a suitable scan definition array for progressive JPEG.)  This is
+	discussed further under "Progressive JPEG support".
+
+boolean do_fancy_downsampling
+	If TRUE, use direct DCT scaling with DCT size > 8 for downsampling
+	of chroma components.
+	If FALSE, use only DCT size <= 8 and simple separate downsampling.
+	Default is TRUE.
+	For better image stability in multiple generation compression cycles
+	it is preferable that this value matches the corresponding
+	do_fancy_upsampling value in decompression.
+
+int smoothing_factor
+	If non-zero, the input image is smoothed; the value should be 1 for
+	minimal smoothing to 100 for maximum smoothing.  Consult jcsample.c
+	for details of the smoothing algorithm.  The default is zero.
+
+boolean write_JFIF_header
+	If TRUE, a JFIF APP0 marker is emitted.  jpeg_set_defaults() and
+	jpeg_set_colorspace() set this TRUE if a JFIF-legal JPEG color space
+	(ie, YCbCr or grayscale) is selected, otherwise FALSE.
+
+UINT8 JFIF_major_version
+UINT8 JFIF_minor_version
+	The version number to be written into the JFIF marker.
+	jpeg_set_defaults() initializes the version to 1.01 (major=minor=1).
+	You should set it to 1.02 (major=1, minor=2) if you plan to write
+	any JFIF 1.02 extension markers.
+
+UINT8 density_unit
+UINT16 X_density
+UINT16 Y_density
+	The resolution information to be written into the JFIF marker;
+	not used otherwise.  density_unit may be 0 for unknown,
+	1 for dots/inch, or 2 for dots/cm.  The default values are 0,1,1
+	indicating square pixels of unknown size.
+
+boolean write_Adobe_marker
+	If TRUE, an Adobe APP14 marker is emitted.  jpeg_set_defaults() and
+	jpeg_set_colorspace() set this TRUE if JPEG color space RGB, CMYK,
+	or YCCK is selected, otherwise FALSE.  It is generally a bad idea
+	to set both write_JFIF_header and write_Adobe_marker.  In fact,
+	you probably shouldn't change the default settings at all --- the
+	default behavior ensures that the JPEG file's color space can be
+	recognized by the decoder.
+
+JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]
+	Pointers to coefficient quantization tables, one per table slot,
+	or NULL if no table is defined for a slot.  Usually these should
+	be set via one of the above helper routines; jpeg_add_quant_table()
+	is general enough to define any quantization table.  The other
+	routines will set up table slot 0 for luminance quality and table
+	slot 1 for chrominance.
+
+int q_scale_factor[NUM_QUANT_TBLS]
+	Linear quantization scaling factors (percentage, initialized 100)
+	for use with jpeg_default_qtables().
+	See rdswitch.c and cjpeg.c for an example of usage.
+	Note that the q_scale_factor[] fields are the "linear" scales, so you
+	have to convert from user-defined ratings via jpeg_quality_scaling().
+	Here is an example code which corresponds to cjpeg -quality 90,70:
+
+		jpeg_set_defaults(cinfo);
+
+		/* Set luminance quality 90. */
+		cinfo->q_scale_factor[0] = jpeg_quality_scaling(90);
+		/* Set chrominance quality 70. */
+		cinfo->q_scale_factor[1] = jpeg_quality_scaling(70);
+
+		jpeg_default_qtables(cinfo, force_baseline);
+
+	CAUTION: You must also set 1x1 subsampling for efficient separate
+	color quality selection, since the default value used by library
+	is 2x2:
+
+		cinfo->comp_info[0].v_samp_factor = 1;
+		cinfo->comp_info[0].h_samp_factor = 1;
+
+JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]
+JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]
+	Pointers to Huffman coding tables, one per table slot, or NULL if
+	no table is defined for a slot.  Slots 0 and 1 are filled with the
+	JPEG sample tables by jpeg_set_defaults().  If you need to allocate
+	more table structures, jpeg_alloc_huff_table() may be used.
+	Note that optimal Huffman tables can be computed for an image
+	by setting optimize_coding, as discussed above; there's seldom
+	any need to mess with providing your own Huffman tables.
+
+
+The actual dimensions of the JPEG image that will be written to the file are
+given by the following fields.  These are computed from the input image
+dimensions and the compression parameters by jpeg_start_compress().  You can
+also call jpeg_calc_jpeg_dimensions() to obtain the values that will result
+from the current parameter settings.  This can be useful if you are trying
+to pick a scaling ratio that will get close to a desired target size.
+
+JDIMENSION jpeg_width		Actual dimensions of output image.
+JDIMENSION jpeg_height
+
+
+Per-component parameters are stored in the struct cinfo.comp_info[i] for
+component number i.  Note that components here refer to components of the
+JPEG color space, *not* the source image color space.  A suitably large
+comp_info[] array is allocated by jpeg_set_defaults(); if you choose not
+to use that routine, it's up to you to allocate the array.
+
+int component_id
+	The one-byte identifier code to be recorded in the JPEG file for
+	this component.  For the standard color spaces, we recommend you
+	leave the default values alone.
+
+int h_samp_factor
+int v_samp_factor
+	Horizontal and vertical sampling factors for the component; must
+	be 1..4 according to the JPEG standard.  Note that larger sampling
+	factors indicate a higher-resolution component; many people find
+	this behavior quite unintuitive.  The default values are 2,2 for
+	luminance components and 1,1 for chrominance components, except
+	for grayscale where 1,1 is used.
+
+int quant_tbl_no
+	Quantization table number for component.  The default value is
+	0 for luminance components and 1 for chrominance components.
+
+int dc_tbl_no
+int ac_tbl_no
+	DC and AC entropy coding table numbers.  The default values are
+	0 for luminance components and 1 for chrominance components.
+
+int component_index
+	Must equal the component's index in comp_info[].  (Beginning in
+	release v6, the compressor library will fill this in automatically;
+	you don't have to.)
+
+
+Decompression parameter selection
+---------------------------------
+
+Decompression parameter selection is somewhat simpler than compression
+parameter selection, since all of the JPEG internal parameters are
+recorded in the source file and need not be supplied by the application.
+(Unless you are working with abbreviated files, in which case see
+"Abbreviated datastreams", below.)  Decompression parameters control
+the postprocessing done on the image to deliver it in a format suitable
+for the application's use.  Many of the parameters control speed/quality
+tradeoffs, in which faster decompression may be obtained at the price of
+a poorer-quality image.  The defaults select the highest quality (slowest)
+processing.
+
+The following fields in the JPEG object are set by jpeg_read_header() and
+may be useful to the application in choosing decompression parameters:
+
+JDIMENSION image_width			Width and height of image
+JDIMENSION image_height
+int num_components			Number of color components
+J_COLOR_SPACE jpeg_color_space		Colorspace of image
+boolean saw_JFIF_marker			TRUE if a JFIF APP0 marker was seen
+  UINT8 JFIF_major_version		Version information from JFIF marker
+  UINT8 JFIF_minor_version
+  UINT8 density_unit			Resolution data from JFIF marker
+  UINT16 X_density
+  UINT16 Y_density
+boolean saw_Adobe_marker		TRUE if an Adobe APP14 marker was seen
+  UINT8 Adobe_transform			Color transform code from Adobe marker
+
+The JPEG color space, unfortunately, is something of a guess since the JPEG
+standard proper does not provide a way to record it.  In practice most files
+adhere to the JFIF or Adobe conventions, and the decoder will recognize these
+correctly.  See "Special color spaces", below, for more info.
+
+
+The decompression parameters that determine the basic properties of the
+returned image are:
+
+J_COLOR_SPACE out_color_space
+	Output color space.  jpeg_read_header() sets an appropriate default
+	based on jpeg_color_space; typically it will be RGB or grayscale.
+	The application can change this field to request output in a different
+	colorspace.  For example, set it to JCS_GRAYSCALE to get grayscale
+	output from a color file.  (This is useful for previewing: grayscale
+	output is faster than full color since the color components need not
+	be processed.)  Note that not all possible color space transforms are
+	currently implemented; you may need to extend jdcolor.c if you want an
+	unusual conversion.
+
+unsigned int scale_num, scale_denom
+	Scale the image by the fraction scale_num/scale_denom.  Currently,
+	the supported scaling ratios are M/N with all M from 1 to 16, where
+	N is the source DCT size, which is 8 for baseline JPEG.  (The library
+	design allows for arbitrary scaling ratios but this is not likely
+	to be implemented any time soon.)  The values are initialized by
+	jpeg_read_header() with the source DCT size.  For baseline JPEG
+	this is 8/8.  If you change only the scale_num value while leaving
+	the other unchanged, then this specifies the DCT scaled size to be
+	applied on the given input.  For baseline JPEG this is equivalent
+	to M/8 scaling, since the source DCT size for baseline JPEG is 8.
+	Smaller scaling ratios permit significantly faster decoding since
+	fewer pixels need be processed and a simpler IDCT method can be used.
+
+boolean quantize_colors
+	If set TRUE, colormapped output will be delivered.  Default is FALSE,
+	meaning that full-color output will be delivered.
+
+The next three parameters are relevant only if quantize_colors is TRUE.
+
+int desired_number_of_colors
+	Maximum number of colors to use in generating a library-supplied color
+	map (the actual number of colors is returned in a different field).
+	Default 256.  Ignored when the application supplies its own color map.
+
+boolean two_pass_quantize
+	If TRUE, an extra pass over the image is made to select a custom color
+	map for the image.  This usually looks a lot better than the one-size-
+	fits-all colormap that is used otherwise.  Default is TRUE.  Ignored
+	when the application supplies its own color map.
+
+J_DITHER_MODE dither_mode
+	Selects color dithering method.  Supported values are:
+		JDITHER_NONE	no dithering: fast, very low quality
+		JDITHER_ORDERED	ordered dither: moderate speed and quality
+		JDITHER_FS	Floyd-Steinberg dither: slow, high quality
+	Default is JDITHER_FS.  (At present, ordered dither is implemented
+	only in the single-pass, standard-colormap case.  If you ask for
+	ordered dither when two_pass_quantize is TRUE or when you supply
+	an external color map, you'll get F-S dithering.)
+
+When quantize_colors is TRUE, the target color map is described by the next
+two fields.  colormap is set to NULL by jpeg_read_header().  The application
+can supply a color map by setting colormap non-NULL and setting
+actual_number_of_colors to the map size.  Otherwise, jpeg_start_decompress()
+selects a suitable color map and sets these two fields itself.
+[Implementation restriction: at present, an externally supplied colormap is
+only accepted for 3-component output color spaces.]
+
+JSAMPARRAY colormap
+	The color map, represented as a 2-D pixel array of out_color_components
+	rows and actual_number_of_colors columns.  Ignored if not quantizing.
+	CAUTION: if the JPEG library creates its own colormap, the storage
+	pointed to by this field is released by jpeg_finish_decompress().
+	Copy the colormap somewhere else first, if you want to save it.
+
+int actual_number_of_colors
+	The number of colors in the color map.
+
+Additional decompression parameters that the application may set include:
+
+J_DCT_METHOD dct_method
+	Selects the algorithm used for the DCT step.  Choices are the same
+	as described above for compression.
+
+boolean do_fancy_upsampling
+	If TRUE, use direct DCT scaling with DCT size > 8 for upsampling
+	of chroma components.
+	If FALSE, use only DCT size <= 8 and simple separate upsampling.
+	Default is TRUE.
+	For better image stability in multiple generation compression cycles
+	it is preferable that this value matches the corresponding
+	do_fancy_downsampling value in compression.
+
+boolean do_block_smoothing
+	If TRUE, interblock smoothing is applied in early stages of decoding
+	progressive JPEG files; if FALSE, not.  Default is TRUE.  Early
+	progression stages look "fuzzy" with smoothing, "blocky" without.
+	In any case, block smoothing ceases to be applied after the first few
+	AC coefficients are known to full accuracy, so it is relevant only
+	when using buffered-image mode for progressive images.
+
+boolean enable_1pass_quant
+boolean enable_external_quant
+boolean enable_2pass_quant
+	These are significant only in buffered-image mode, which is
+	described in its own section below.
+
+
+The output image dimensions are given by the following fields.  These are
+computed from the source image dimensions and the decompression parameters
+by jpeg_start_decompress().  You can also call jpeg_calc_output_dimensions()
+to obtain the values that will result from the current parameter settings.
+This can be useful if you are trying to pick a scaling ratio that will get
+close to a desired target size.  It's also important if you are using the
+JPEG library's memory manager to allocate output buffer space, because you
+are supposed to request such buffers *before* jpeg_start_decompress().
+
+JDIMENSION output_width		Actual dimensions of output image.
+JDIMENSION output_height
+int out_color_components	Number of color components in out_color_space.
+int output_components		Number of color components returned.
+int rec_outbuf_height		Recommended height of scanline buffer.
+
+When quantizing colors, output_components is 1, indicating a single color map
+index per pixel.  Otherwise it equals out_color_components.  The output arrays
+are required to be output_width * output_components JSAMPLEs wide.
+
+rec_outbuf_height is the recommended minimum height (in scanlines) of the
+buffer passed to jpeg_read_scanlines().  If the buffer is smaller, the
+library will still work, but time will be wasted due to unnecessary data
+copying.  In high-quality modes, rec_outbuf_height is always 1, but some
+faster, lower-quality modes set it to larger values (typically 2 to 4).
+If you are going to ask for a high-speed processing mode, you may as well
+go to the trouble of honoring rec_outbuf_height so as to avoid data copying.
+(An output buffer larger than rec_outbuf_height lines is OK, but won't
+provide any material speed improvement over that height.)
+
+
+Special color spaces
+--------------------
+
+The JPEG standard itself is "color blind" and doesn't specify any particular
+color space.  It is customary to convert color data to a luminance/chrominance
+color space before compressing, since this permits greater compression.  The
+existing de-facto JPEG file format standards specify YCbCr or grayscale data
+(JFIF), or grayscale, RGB, YCbCr, CMYK, or YCCK (Adobe).  For special
+applications such as multispectral images, other color spaces can be used,
+but it must be understood that such files will be unportable.
+
+The JPEG library can handle the most common colorspace conversions (namely
+RGB <=> YCbCr and CMYK <=> YCCK).  It can also deal with data of an unknown
+color space, passing it through without conversion.  If you deal extensively
+with an unusual color space, you can easily extend the library to understand
+additional color spaces and perform appropriate conversions.
+
+For compression, the source data's color space is specified by field
+in_color_space.  This is transformed to the JPEG file's color space given
+by jpeg_color_space.  jpeg_set_defaults() chooses a reasonable JPEG color
+space depending on in_color_space, but you can override this by calling
+jpeg_set_colorspace().  Of course you must select a supported transformation.
+jccolor.c currently supports the following transformations:
+	RGB => YCbCr
+	RGB => GRAYSCALE
+	YCbCr => GRAYSCALE
+	CMYK => YCCK
+plus the null transforms: GRAYSCALE => GRAYSCALE, RGB => RGB,
+YCbCr => YCbCr, CMYK => CMYK, YCCK => YCCK, and UNKNOWN => UNKNOWN.
+
+The de-facto file format standards (JFIF and Adobe) specify APPn markers that
+indicate the color space of the JPEG file.  It is important to ensure that
+these are written correctly, or omitted if the JPEG file's color space is not
+one of the ones supported by the de-facto standards.  jpeg_set_colorspace()
+will set the compression parameters to include or omit the APPn markers
+properly, so long as it is told the truth about the JPEG color space.
+For example, if you are writing some random 3-component color space without
+conversion, don't try to fake out the library by setting in_color_space and
+jpeg_color_space to JCS_YCbCr; use JCS_UNKNOWN.  You may want to write an
+APPn marker of your own devising to identify the colorspace --- see "Special
+markers", below.
+
+When told that the color space is UNKNOWN, the library will default to using
+luminance-quality compression parameters for all color components.  You may
+well want to change these parameters.  See the source code for
+jpeg_set_colorspace(), in jcparam.c, for details.
+
+For decompression, the JPEG file's color space is given in jpeg_color_space,
+and this is transformed to the output color space out_color_space.
+jpeg_read_header's setting of jpeg_color_space can be relied on if the file
+conforms to JFIF or Adobe conventions, but otherwise it is no better than a
+guess.  If you know the JPEG file's color space for certain, you can override
+jpeg_read_header's guess by setting jpeg_color_space.  jpeg_read_header also
+selects a default output color space based on (its guess of) jpeg_color_space;
+set out_color_space to override this.  Again, you must select a supported
+transformation.  jdcolor.c currently supports
+	YCbCr => RGB
+	YCbCr => GRAYSCALE
+	RGB => GRAYSCALE
+	GRAYSCALE => RGB
+	YCCK => CMYK
+as well as the null transforms.  (Since GRAYSCALE=>RGB is provided, an
+application can force grayscale JPEGs to look like color JPEGs if it only
+wants to handle one case.)
+
+The two-pass color quantizer, jquant2.c, is specialized to handle RGB data
+(it weights distances appropriately for RGB colors).  You'll need to modify
+the code if you want to use it for non-RGB output color spaces.  Note that
+jquant2.c is used to map to an application-supplied colormap as well as for
+the normal two-pass colormap selection process.
+
+CAUTION: it appears that Adobe Photoshop writes inverted data in CMYK JPEG
+files: 0 represents 100% ink coverage, rather than 0% ink as you'd expect.
+This is arguably a bug in Photoshop, but if you need to work with Photoshop
+CMYK files, you will have to deal with it in your application.  We cannot
+"fix" this in the library by inverting the data during the CMYK<=>YCCK
+transform, because that would break other applications, notably Ghostscript.
+Photoshop versions prior to 3.0 write EPS files containing JPEG-encoded CMYK
+data in the same inverted-YCCK representation used in bare JPEG files, but
+the surrounding PostScript code performs an inversion using the PS image
+operator.  I am told that Photoshop 3.0 will write uninverted YCCK in
+EPS/JPEG files, and will omit the PS-level inversion.  (But the data
+polarity used in bare JPEG files will not change in 3.0.)  In either case,
+the JPEG library must not invert the data itself, or else Ghostscript would
+read these EPS files incorrectly.
+
+
+Error handling
+--------------
+
+When the default error handler is used, any error detected inside the JPEG
+routines will cause a message to be printed on stderr, followed by exit().
+You can supply your own error handling routines to override this behavior
+and to control the treatment of nonfatal warnings and trace/debug messages.
+The file example.c illustrates the most common case, which is to have the
+application regain control after an error rather than exiting.
+
+The JPEG library never writes any message directly; it always goes through
+the error handling routines.  Three classes of messages are recognized:
+  * Fatal errors: the library cannot continue.
+  * Warnings: the library can continue, but the data is corrupt, and a
+    damaged output image is likely to result.
+  * Trace/informational messages.  These come with a trace level indicating
+    the importance of the message; you can control the verbosity of the
+    program by adjusting the maximum trace level that will be displayed.
+
+You may, if you wish, simply replace the entire JPEG error handling module
+(jerror.c) with your own code.  However, you can avoid code duplication by
+only replacing some of the routines depending on the behavior you need.
+This is accomplished by calling jpeg_std_error() as usual, but then overriding
+some of the method pointers in the jpeg_error_mgr struct, as illustrated by
+example.c.
+
+All of the error handling routines will receive a pointer to the JPEG object
+(a j_common_ptr which points to either a jpeg_compress_struct or a
+jpeg_decompress_struct; if you need to tell which, test the is_decompressor
+field).  This struct includes a pointer to the error manager struct in its
+"err" field.  Frequently, custom error handler routines will need to access
+additional data which is not known to the JPEG library or the standard error
+handler.  The most convenient way to do this is to embed either the JPEG
+object or the jpeg_error_mgr struct in a larger structure that contains
+additional fields; then casting the passed pointer provides access to the
+additional fields.  Again, see example.c for one way to do it.  (Beginning
+with IJG version 6b, there is also a void pointer "client_data" in each
+JPEG object, which the application can also use to find related data.
+The library does not touch client_data at all.)
+
+The individual methods that you might wish to override are:
+
+error_exit (j_common_ptr cinfo)
+	Receives control for a fatal error.  Information sufficient to
+	generate the error message has been stored in cinfo->err; call
+	output_message to display it.  Control must NOT return to the caller;
+	generally this routine will exit() or longjmp() somewhere.
+	Typically you would override this routine to get rid of the exit()
+	default behavior.  Note that if you continue processing, you should
+	clean up the JPEG object with jpeg_abort() or jpeg_destroy().
+
+output_message (j_common_ptr cinfo)
+	Actual output of any JPEG message.  Override this to send messages
+	somewhere other than stderr.  Note that this method does not know
+	how to generate a message, only where to send it.
+
+format_message (j_common_ptr cinfo, char * buffer)
+	Constructs a readable error message string based on the error info
+	stored in cinfo->err.  This method is called by output_message.  Few
+	applications should need to override this method.  One possible
+	reason for doing so is to implement dynamic switching of error message
+	language.
+
+emit_message (j_common_ptr cinfo, int msg_level)
+	Decide whether or not to emit a warning or trace message; if so,
+	calls output_message.  The main reason for overriding this method
+	would be to abort on warnings.  msg_level is -1 for warnings,
+	0 and up for trace messages.
+
+Only error_exit() and emit_message() are called from the rest of the JPEG
+library; the other two are internal to the error handler.
+
+The actual message texts are stored in an array of strings which is pointed to
+by the field err->jpeg_message_table.  The messages are numbered from 0 to
+err->last_jpeg_message, and it is these code numbers that are used in the
+JPEG library code.  You could replace the message texts (for instance, with
+messages in French or German) by changing the message table pointer.  See
+jerror.h for the default texts.  CAUTION: this table will almost certainly
+change or grow from one library version to the next.
+
+It may be useful for an application to add its own message texts that are
+handled by the same mechanism.  The error handler supports a second "add-on"
+message table for this purpose.  To define an addon table, set the pointer
+err->addon_message_table and the message numbers err->first_addon_message and
+err->last_addon_message.  If you number the addon messages beginning at 1000
+or so, you won't have to worry about conflicts with the library's built-in
+messages.  See the sample applications cjpeg/djpeg for an example of using
+addon messages (the addon messages are defined in cderror.h).
+
+Actual invocation of the error handler is done via macros defined in jerror.h:
+	ERREXITn(...)	for fatal errors
+	WARNMSn(...)	for corrupt-data warnings
+	TRACEMSn(...)	for trace and informational messages.
+These macros store the message code and any additional parameters into the
+error handler struct, then invoke the error_exit() or emit_message() method.
+The variants of each macro are for varying numbers of additional parameters.
+The additional parameters are inserted into the generated message using
+standard printf() format codes.
+
+See jerror.h and jerror.c for further details.
+
+
+Compressed data handling (source and destination managers)
+----------------------------------------------------------
+
+The JPEG compression library sends its compressed data to a "destination
+manager" module.  The default destination manager just writes the data to a
+memory buffer or to a stdio stream, but you can provide your own manager to
+do something else.  Similarly, the decompression library calls a "source
+manager" to obtain the compressed data; you can provide your own source
+manager if you want the data to come from somewhere other than a memory
+buffer or a stdio stream.
+
+In both cases, compressed data is processed a bufferload at a time: the
+destination or source manager provides a work buffer, and the library invokes
+the manager only when the buffer is filled or emptied.  (You could define a
+one-character buffer to force the manager to be invoked for each byte, but
+that would be rather inefficient.)  The buffer's size and location are
+controlled by the manager, not by the library.  For example, the memory
+source manager just makes the buffer pointer and length point to the original
+data in memory.  In this case the buffer-reload procedure will be invoked
+only if the decompressor ran off the end of the datastream, which would
+indicate an erroneous datastream.
+
+The work buffer is defined as an array of datatype JOCTET, which is generally
+"char" or "unsigned char".  On a machine where char is not exactly 8 bits
+wide, you must define JOCTET as a wider data type and then modify the data
+source and destination modules to transcribe the work arrays into 8-bit units
+on external storage.
+
+A data destination manager struct contains a pointer and count defining the
+next byte to write in the work buffer and the remaining free space:
+
+	JOCTET * next_output_byte;  /* => next byte to write in buffer */
+	size_t free_in_buffer;      /* # of byte spaces remaining in buffer */
+
+The library increments the pointer and decrements the count until the buffer
+is filled.  The manager's empty_output_buffer method must reset the pointer
+and count.  The manager is expected to remember the buffer's starting address
+and total size in private fields not visible to the library.
+
+A data destination manager provides three methods:
+
+init_destination (j_compress_ptr cinfo)
+	Initialize destination.  This is called by jpeg_start_compress()
+	before any data is actually written.  It must initialize
+	next_output_byte and free_in_buffer.  free_in_buffer must be
+	initialized to a positive value.
+
+empty_output_buffer (j_compress_ptr cinfo)
+	This is called whenever the buffer has filled (free_in_buffer
+	reaches zero).  In typical applications, it should write out the
+	*entire* buffer (use the saved start address and buffer length;
+	ignore the current state of next_output_byte and free_in_buffer).
+	Then reset the pointer & count to the start of the buffer, and
+	return TRUE indicating that the buffer has been dumped.
+	free_in_buffer must be set to a positive value when TRUE is
+	returned.  A FALSE return should only be used when I/O suspension is
+	desired (this operating mode is discussed in the next section).
+
+term_destination (j_compress_ptr cinfo)
+	Terminate destination --- called by jpeg_finish_compress() after all
+	data has been written.  In most applications, this must flush any
+	data remaining in the buffer.  Use either next_output_byte or
+	free_in_buffer to determine how much data is in the buffer.
+
+term_destination() is NOT called by jpeg_abort() or jpeg_destroy().  If you
+want the destination manager to be cleaned up during an abort, you must do it
+yourself.
+
+You will also need code to create a jpeg_destination_mgr struct, fill in its
+method pointers, and insert a pointer to the struct into the "dest" field of
+the JPEG compression object.  This can be done in-line in your setup code if
+you like, but it's probably cleaner to provide a separate routine similar to
+the jpeg_stdio_dest() or jpeg_mem_dest() routines of the supplied destination
+managers.
+
+Decompression source managers follow a parallel design, but with some
+additional frammishes.  The source manager struct contains a pointer and count
+defining the next byte to read from the work buffer and the number of bytes
+remaining:
+
+	const JOCTET * next_input_byte; /* => next byte to read from buffer */
+	size_t bytes_in_buffer;         /* # of bytes remaining in buffer */
+
+The library increments the pointer and decrements the count until the buffer
+is emptied.  The manager's fill_input_buffer method must reset the pointer and
+count.  In most applications, the manager must remember the buffer's starting
+address and total size in private fields not visible to the library.
+
+A data source manager provides five methods:
+
+init_source (j_decompress_ptr cinfo)
+	Initialize source.  This is called by jpeg_read_header() before any
+	data is actually read.  Unlike init_destination(), it may leave
+	bytes_in_buffer set to 0 (in which case a fill_input_buffer() call
+	will occur immediately).
+
+fill_input_buffer (j_decompress_ptr cinfo)
+	This is called whenever bytes_in_buffer has reached zero and more
+	data is wanted.  In typical applications, it should read fresh data
+	into the buffer (ignoring the current state of next_input_byte and
+	bytes_in_buffer), reset the pointer & count to the start of the
+	buffer, and return TRUE indicating that the buffer has been reloaded.
+	It is not necessary to fill the buffer entirely, only to obtain at
+	least one more byte.  bytes_in_buffer MUST be set to a positive value
+	if TRUE is returned.  A FALSE return should only be used when I/O
+	suspension is desired (this mode is discussed in the next section).
+
+skip_input_data (j_decompress_ptr cinfo, long num_bytes)
+	Skip num_bytes worth of data.  The buffer pointer and count should
+	be advanced over num_bytes input bytes, refilling the buffer as
+	needed.  This is used to skip over a potentially large amount of
+	uninteresting data (such as an APPn marker).  In some applications
+	it may be possible to optimize away the reading of the skipped data,
+	but it's not clear that being smart is worth much trouble; large
+	skips are uncommon.  bytes_in_buffer may be zero on return.
+	A zero or negative skip count should be treated as a no-op.
+
+resync_to_restart (j_decompress_ptr cinfo, int desired)
+	This routine is called only when the decompressor has failed to find
+	a restart (RSTn) marker where one is expected.  Its mission is to
+	find a suitable point for resuming decompression.  For most
+	applications, we recommend that you just use the default resync
+	procedure, jpeg_resync_to_restart().  However, if you are able to back
+	up in the input data stream, or if you have a-priori knowledge about
+	the likely location of restart markers, you may be able to do better.
+	Read the read_restart_marker() and jpeg_resync_to_restart() routines
+	in jdmarker.c if you think you'd like to implement your own resync
+	procedure.
+
+term_source (j_decompress_ptr cinfo)
+	Terminate source --- called by jpeg_finish_decompress() after all
+	data has been read.  Often a no-op.
+
+For both fill_input_buffer() and skip_input_data(), there is no such thing
+as an EOF return.  If the end of the file has been reached, the routine has
+a choice of exiting via ERREXIT() or inserting fake data into the buffer.
+In most cases, generating a warning message and inserting a fake EOI marker
+is the best course of action --- this will allow the decompressor to output
+however much of the image is there.  In pathological cases, the decompressor
+may swallow the EOI and again demand data ... just keep feeding it fake EOIs.
+jdatasrc.c illustrates the recommended error recovery behavior.
+
+term_source() is NOT called by jpeg_abort() or jpeg_destroy().  If you want
+the source manager to be cleaned up during an abort, you must do it yourself.
+
+You will also need code to create a jpeg_source_mgr struct, fill in its method
+pointers, and insert a pointer to the struct into the "src" field of the JPEG
+decompression object.  This can be done in-line in your setup code if you
+like, but it's probably cleaner to provide a separate routine similar to the
+jpeg_stdio_src() or jpeg_mem_src() routines of the supplied source managers.
+
+For more information, consult the memory and stdio source and destination
+managers in jdatasrc.c and jdatadst.c.
+
+
+I/O suspension
+--------------
+
+Some applications need to use the JPEG library as an incremental memory-to-
+memory filter: when the compressed data buffer is filled or emptied, they want
+control to return to the outer loop, rather than expecting that the buffer can
+be emptied or reloaded within the data source/destination manager subroutine.
+The library supports this need by providing an "I/O suspension" mode, which we
+describe in this section.
+
+The I/O suspension mode is not a panacea: nothing is guaranteed about the
+maximum amount of time spent in any one call to the library, so it will not
+eliminate response-time problems in single-threaded applications.  If you
+need guaranteed response time, we suggest you "bite the bullet" and implement
+a real multi-tasking capability.
+
+To use I/O suspension, cooperation is needed between the calling application
+and the data source or destination manager; you will always need a custom
+source/destination manager.  (Please read the previous section if you haven't
+already.)  The basic idea is that the empty_output_buffer() or
+fill_input_buffer() routine is a no-op, merely returning FALSE to indicate
+that it has done nothing.  Upon seeing this, the JPEG library suspends
+operation and returns to its caller.  The surrounding application is
+responsible for emptying or refilling the work buffer before calling the
+JPEG library again.
+
+Compression suspension:
+
+For compression suspension, use an empty_output_buffer() routine that returns
+FALSE; typically it will not do anything else.  This will cause the
+compressor to return to the caller of jpeg_write_scanlines(), with the return
+value indicating that not all the supplied scanlines have been accepted.
+The application must make more room in the output buffer, adjust the output
+buffer pointer/count appropriately, and then call jpeg_write_scanlines()
+again, pointing to the first unconsumed scanline.
+
+When forced to suspend, the compressor will backtrack to a convenient stopping
+point (usually the start of the current MCU); it will regenerate some output
+data when restarted.  Therefore, although empty_output_buffer() is only
+called when the buffer is filled, you should NOT write out the entire buffer
+after a suspension.  Write only the data up to the current position of
+next_output_byte/free_in_buffer.  The data beyond that point will be
+regenerated after resumption.
+
+Because of the backtracking behavior, a good-size output buffer is essential
+for efficiency; you don't want the compressor to suspend often.  (In fact, an
+overly small buffer could lead to infinite looping, if a single MCU required
+more data than would fit in the buffer.)  We recommend a buffer of at least
+several Kbytes.  You may want to insert explicit code to ensure that you don't
+call jpeg_write_scanlines() unless there is a reasonable amount of space in
+the output buffer; in other words, flush the buffer before trying to compress
+more data.
+
+The compressor does not allow suspension while it is trying to write JPEG
+markers at the beginning and end of the file.  This means that:
+  * At the beginning of a compression operation, there must be enough free
+    space in the output buffer to hold the header markers (typically 600 or
+    so bytes).  The recommended buffer size is bigger than this anyway, so
+    this is not a problem as long as you start with an empty buffer.  However,
+    this restriction might catch you if you insert large special markers, such
+    as a JFIF thumbnail image, without flushing the buffer afterwards.
+  * When you call jpeg_finish_compress(), there must be enough space in the
+    output buffer to emit any buffered data and the final EOI marker.  In the
+    current implementation, half a dozen bytes should suffice for this, but
+    for safety's sake we recommend ensuring that at least 100 bytes are free
+    before calling jpeg_finish_compress().
+
+A more significant restriction is that jpeg_finish_compress() cannot suspend.
+This means you cannot use suspension with multi-pass operating modes, namely
+Huffman code optimization and multiple-scan output.  Those modes write the
+whole file during jpeg_finish_compress(), which will certainly result in
+buffer overrun.  (Note that this restriction applies only to compression,
+not decompression.  The decompressor supports input suspension in all of its
+operating modes.)
+
+Decompression suspension:
+
+For decompression suspension, use a fill_input_buffer() routine that simply
+returns FALSE (except perhaps during error recovery, as discussed below).
+This will cause the decompressor to return to its caller with an indication
+that suspension has occurred.  This can happen at four places:
+  * jpeg_read_header(): will return JPEG_SUSPENDED.
+  * jpeg_start_decompress(): will return FALSE, rather than its usual TRUE.
+  * jpeg_read_scanlines(): will return the number of scanlines already
+	completed (possibly 0).
+  * jpeg_finish_decompress(): will return FALSE, rather than its usual TRUE.
+The surrounding application must recognize these cases, load more data into
+the input buffer, and repeat the call.  In the case of jpeg_read_scanlines(),
+increment the passed pointers past any scanlines successfully read.
+
+Just as with compression, the decompressor will typically backtrack to a
+convenient restart point before suspending.  When fill_input_buffer() is
+called, next_input_byte/bytes_in_buffer point to the current restart point,
+which is where the decompressor will backtrack to if FALSE is returned.
+The data beyond that position must NOT be discarded if you suspend; it needs
+to be re-read upon resumption.  In most implementations, you'll need to shift
+this data down to the start of your work buffer and then load more data after
+it.  Again, this behavior means that a several-Kbyte work buffer is essential
+for decent performance; furthermore, you should load a reasonable amount of
+new data before resuming decompression.  (If you loaded, say, only one new
+byte each time around, you could waste a LOT of cycles.)
+
+The skip_input_data() source manager routine requires special care in a
+suspension scenario.  This routine is NOT granted the ability to suspend the
+decompressor; it can decrement bytes_in_buffer to zero, but no more.  If the
+requested skip distance exceeds the amount of data currently in the input
+buffer, then skip_input_data() must set bytes_in_buffer to zero and record the
+additional skip distance somewhere else.  The decompressor will immediately
+call fill_input_buffer(), which should return FALSE, which will cause a
+suspension return.  The surrounding application must then arrange to discard
+the recorded number of bytes before it resumes loading the input buffer.
+(Yes, this design is rather baroque, but it avoids complexity in the far more
+common case where a non-suspending source manager is used.)
+
+If the input data has been exhausted, we recommend that you emit a warning
+and insert dummy EOI markers just as a non-suspending data source manager
+would do.  This can be handled either in the surrounding application logic or
+within fill_input_buffer(); the latter is probably more efficient.  If
+fill_input_buffer() knows that no more data is available, it can set the
+pointer/count to point to a dummy EOI marker and then return TRUE just as
+though it had read more data in a non-suspending situation.
+
+The decompressor does not attempt to suspend within standard JPEG markers;
+instead it will backtrack to the start of the marker and reprocess the whole
+marker next time.  Hence the input buffer must be large enough to hold the
+longest standard marker in the file.  Standard JPEG markers should normally
+not exceed a few hundred bytes each (DHT tables are typically the longest).
+We recommend at least a 2K buffer for performance reasons, which is much
+larger than any correct marker is likely to be.  For robustness against
+damaged marker length counts, you may wish to insert a test in your
+application for the case that the input buffer is completely full and yet
+the decoder has suspended without consuming any data --- otherwise, if this
+situation did occur, it would lead to an endless loop.  (The library can't
+provide this test since it has no idea whether "the buffer is full", or
+even whether there is a fixed-size input buffer.)
+
+The input buffer would need to be 64K to allow for arbitrary COM or APPn
+markers, but these are handled specially: they are either saved into allocated
+memory, or skipped over by calling skip_input_data().  In the former case,
+suspension is handled correctly, and in the latter case, the problem of
+buffer overrun is placed on skip_input_data's shoulders, as explained above.
+Note that if you provide your own marker handling routine for large markers,
+you should consider how to deal with buffer overflow.
+
+Multiple-buffer management:
+
+In some applications it is desirable to store the compressed data in a linked
+list of buffer areas, so as to avoid data copying.  This can be handled by
+having empty_output_buffer() or fill_input_buffer() set the pointer and count
+to reference the next available buffer; FALSE is returned only if no more
+buffers are available.  Although seemingly straightforward, there is a
+pitfall in this approach: the backtrack that occurs when FALSE is returned
+could back up into an earlier buffer.  For example, when fill_input_buffer()
+is called, the current pointer & count indicate the backtrack restart point.
+Since fill_input_buffer() will set the pointer and count to refer to a new
+buffer, the restart position must be saved somewhere else.  Suppose a second
+call to fill_input_buffer() occurs in the same library call, and no
+additional input data is available, so fill_input_buffer must return FALSE.
+If the JPEG library has not moved the pointer/count forward in the current
+buffer, then *the correct restart point is the saved position in the prior
+buffer*.  Prior buffers may be discarded only after the library establishes
+a restart point within a later buffer.  Similar remarks apply for output into
+a chain of buffers.
+
+The library will never attempt to backtrack over a skip_input_data() call,
+so any skipped data can be permanently discarded.  You still have to deal
+with the case of skipping not-yet-received data, however.
+
+It's much simpler to use only a single buffer; when fill_input_buffer() is
+called, move any unconsumed data (beyond the current pointer/count) down to
+the beginning of this buffer and then load new data into the remaining buffer
+space.  This approach requires a little more data copying but is far easier
+to get right.
+
+
+Progressive JPEG support
+------------------------
+
+Progressive JPEG rearranges the stored data into a series of scans of
+increasing quality.  In situations where a JPEG file is transmitted across a
+slow communications link, a decoder can generate a low-quality image very
+quickly from the first scan, then gradually improve the displayed quality as
+more scans are received.  The final image after all scans are complete is
+identical to that of a regular (sequential) JPEG file of the same quality
+setting.  Progressive JPEG files are often slightly smaller than equivalent
+sequential JPEG files, but the possibility of incremental display is the main
+reason for using progressive JPEG.
+
+The IJG encoder library generates progressive JPEG files when given a
+suitable "scan script" defining how to divide the data into scans.
+Creation of progressive JPEG files is otherwise transparent to the encoder.
+Progressive JPEG files can also be read transparently by the decoder library.
+If the decoding application simply uses the library as defined above, it
+will receive a final decoded image without any indication that the file was
+progressive.  Of course, this approach does not allow incremental display.
+To perform incremental display, an application needs to use the decoder
+library's "buffered-image" mode, in which it receives a decoded image
+multiple times.
+
+Each displayed scan requires about as much work to decode as a full JPEG
+image of the same size, so the decoder must be fairly fast in relation to the
+data transmission rate in order to make incremental display useful.  However,
+it is possible to skip displaying the image and simply add the incoming bits
+to the decoder's coefficient buffer.  This is fast because only Huffman
+decoding need be done, not IDCT, upsampling, colorspace conversion, etc.
+The IJG decoder library allows the application to switch dynamically between
+displaying the image and simply absorbing the incoming bits.  A properly
+coded application can automatically adapt the number of display passes to
+suit the time available as the image is received.  Also, a final
+higher-quality display cycle can be performed from the buffered data after
+the end of the file is reached.
+
+Progressive compression:
+
+To create a progressive JPEG file (or a multiple-scan sequential JPEG file),
+set the scan_info cinfo field to point to an array of scan descriptors, and
+perform compression as usual.  Instead of constructing your own scan list,
+you can call the jpeg_simple_progression() helper routine to create a
+recommended progression sequence; this method should be used by all
+applications that don't want to get involved in the nitty-gritty of
+progressive scan sequence design.  (If you want to provide user control of
+scan sequences, you may wish to borrow the scan script reading code found
+in rdswitch.c, so that you can read scan script files just like cjpeg's.)
+When scan_info is not NULL, the compression library will store DCT'd data
+into a buffer array as jpeg_write_scanlines() is called, and will emit all
+the requested scans during jpeg_finish_compress().  This implies that
+multiple-scan output cannot be created with a suspending data destination
+manager, since jpeg_finish_compress() does not support suspension.  We
+should also note that the compressor currently forces Huffman optimization
+mode when creating a progressive JPEG file, because the default Huffman
+tables are unsuitable for progressive files.
+
+Progressive decompression:
+
+When buffered-image mode is not used, the decoder library will read all of
+a multi-scan file during jpeg_start_decompress(), so that it can provide a
+final decoded image.  (Here "multi-scan" means either progressive or
+multi-scan sequential.)  This makes multi-scan files transparent to the
+decoding application.  However, existing applications that used suspending
+input with version 5 of the IJG library will need to be modified to check
+for a suspension return from jpeg_start_decompress().
+
+To perform incremental display, an application must use the library's
+buffered-image mode.  This is described in the next section.
+
+
+Buffered-image mode
+-------------------
+
+In buffered-image mode, the library stores the partially decoded image in a
+coefficient buffer, from which it can be read out as many times as desired.
+This mode is typically used for incremental display of progressive JPEG files,
+but it can be used with any JPEG file.  Each scan of a progressive JPEG file
+adds more data (more detail) to the buffered image.  The application can
+display in lockstep with the source file (one display pass per input scan),
+or it can allow input processing to outrun display processing.  By making
+input and display processing run independently, it is possible for the
+application to adapt progressive display to a wide range of data transmission
+rates.
+
+The basic control flow for buffered-image decoding is
+
+	jpeg_create_decompress()
+	set data source
+	jpeg_read_header()
+	set overall decompression parameters
+	cinfo.buffered_image = TRUE;	/* select buffered-image mode */
+	jpeg_start_decompress()
+	for (each output pass) {
+	    adjust output decompression parameters if required
+	    jpeg_start_output()		/* start a new output pass */
+	    for (all scanlines in image) {
+	        jpeg_read_scanlines()
+	        display scanlines
+	    }
+	    jpeg_finish_output()	/* terminate output pass */
+	}
+	jpeg_finish_decompress()
+	jpeg_destroy_decompress()
+
+This differs from ordinary unbuffered decoding in that there is an additional
+level of looping.  The application can choose how many output passes to make
+and how to display each pass.
+
+The simplest approach to displaying progressive images is to do one display
+pass for each scan appearing in the input file.  In this case the outer loop
+condition is typically
+	while (! jpeg_input_complete(&cinfo))
+and the start-output call should read
+	jpeg_start_output(&cinfo, cinfo.input_scan_number);
+The second parameter to jpeg_start_output() indicates which scan of the input
+file is to be displayed; the scans are numbered starting at 1 for this
+purpose.  (You can use a loop counter starting at 1 if you like, but using
+the library's input scan counter is easier.)  The library automatically reads
+data as necessary to complete each requested scan, and jpeg_finish_output()
+advances to the next scan or end-of-image marker (hence input_scan_number
+will be incremented by the time control arrives back at jpeg_start_output()).
+With this technique, data is read from the input file only as needed, and
+input and output processing run in lockstep.
+
+After reading the final scan and reaching the end of the input file, the
+buffered image remains available; it can be read additional times by
+repeating the jpeg_start_output()/jpeg_read_scanlines()/jpeg_finish_output()
+sequence.  For example, a useful technique is to use fast one-pass color
+quantization for display passes made while the image is arriving, followed by
+a final display pass using two-pass quantization for highest quality.  This
+is done by changing the library parameters before the final output pass.
+Changing parameters between passes is discussed in detail below.
+
+In general the last scan of a progressive file cannot be recognized as such
+until after it is read, so a post-input display pass is the best approach if
+you want special processing in the final pass.
+
+When done with the image, be sure to call jpeg_finish_decompress() to release
+the buffered image (or just use jpeg_destroy_decompress()).
+
+If input data arrives faster than it can be displayed, the application can
+cause the library to decode input data in advance of what's needed to produce
+output.  This is done by calling the routine jpeg_consume_input().
+The return value is one of the following:
+	JPEG_REACHED_SOS:    reached an SOS marker (the start of a new scan)
+	JPEG_REACHED_EOI:    reached the EOI marker (end of image)
+	JPEG_ROW_COMPLETED:  completed reading one MCU row of compressed data
+	JPEG_SCAN_COMPLETED: completed reading last MCU row of current scan
+	JPEG_SUSPENDED:      suspended before completing any of the above
+(JPEG_SUSPENDED can occur only if a suspending data source is used.)  This
+routine can be called at any time after initializing the JPEG object.  It
+reads some additional data and returns when one of the indicated significant
+events occurs.  (If called after the EOI marker is reached, it will
+immediately return JPEG_REACHED_EOI without attempting to read more data.)
+
+The library's output processing will automatically call jpeg_consume_input()
+whenever the output processing overtakes the input; thus, simple lockstep
+display requires no direct calls to jpeg_consume_input().  But by adding
+calls to jpeg_consume_input(), you can absorb data in advance of what is
+being displayed.  This has two benefits:
+  * You can limit buildup of unprocessed data in your input buffer.
+  * You can eliminate extra display passes by paying attention to the
+    state of the library's input processing.
+
+The first of these benefits only requires interspersing calls to
+jpeg_consume_input() with your display operations and any other processing
+you may be doing.  To avoid wasting cycles due to backtracking, it's best to
+call jpeg_consume_input() only after a hundred or so new bytes have arrived.
+This is discussed further under "I/O suspension", above.  (Note: the JPEG
+library currently is not thread-safe.  You must not call jpeg_consume_input()
+from one thread of control if a different library routine is working on the
+same JPEG object in another thread.)
+
+When input arrives fast enough that more than one new scan is available
+before you start a new output pass, you may as well skip the output pass
+corresponding to the completed scan.  This occurs for free if you pass
+cinfo.input_scan_number as the target scan number to jpeg_start_output().
+The input_scan_number field is simply the index of the scan currently being
+consumed by the input processor.  You can ensure that this is up-to-date by
+emptying the input buffer just before calling jpeg_start_output(): call
+jpeg_consume_input() repeatedly until it returns JPEG_SUSPENDED or
+JPEG_REACHED_EOI.
+
+The target scan number passed to jpeg_start_output() is saved in the
+cinfo.output_scan_number field.  The library's output processing calls
+jpeg_consume_input() whenever the current input scan number and row within
+that scan is less than or equal to the current output scan number and row.
+Thus, input processing can "get ahead" of the output processing but is not
+allowed to "fall behind".  You can achieve several different effects by
+manipulating this interlock rule.  For example, if you pass a target scan
+number greater than the current input scan number, the output processor will
+wait until that scan starts to arrive before producing any output.  (To avoid
+an infinite loop, the target scan number is automatically reset to the last
+scan number when the end of image is reached.  Thus, if you specify a large
+target scan number, the library will just absorb the entire input file and
+then perform an output pass.  This is effectively the same as what
+jpeg_start_decompress() does when you don't select buffered-image mode.)
+When you pass a target scan number equal to the current input scan number,
+the image is displayed no faster than the current input scan arrives.  The
+final possibility is to pass a target scan number less than the current input
+scan number; this disables the input/output interlock and causes the output
+processor to simply display whatever it finds in the image buffer, without
+waiting for input.  (However, the library will not accept a target scan
+number less than one, so you can't avoid waiting for the first scan.)
+
+When data is arriving faster than the output display processing can advance
+through the image, jpeg_consume_input() will store data into the buffered
+image beyond the point at which the output processing is reading data out
+again.  If the input arrives fast enough, it may "wrap around" the buffer to
+the point where the input is more than one whole scan ahead of the output.
+If the output processing simply proceeds through its display pass without
+paying attention to the input, the effect seen on-screen is that the lower
+part of the image is one or more scans better in quality than the upper part.
+Then, when the next output scan is started, you have a choice of what target
+scan number to use.  The recommended choice is to use the current input scan
+number at that time, which implies that you've skipped the output scans
+corresponding to the input scans that were completed while you processed the
+previous output scan.  In this way, the decoder automatically adapts its
+speed to the arriving data, by skipping output scans as necessary to keep up
+with the arriving data.
+
+When using this strategy, you'll want to be sure that you perform a final
+output pass after receiving all the data; otherwise your last display may not
+be full quality across the whole screen.  So the right outer loop logic is
+something like this:
+	do {
+	    absorb any waiting input by calling jpeg_consume_input()
+	    final_pass = jpeg_input_complete(&cinfo);
+	    adjust output decompression parameters if required
+	    jpeg_start_output(&cinfo, cinfo.input_scan_number);
+	    ...
+	    jpeg_finish_output()
+	} while (! final_pass);
+rather than quitting as soon as jpeg_input_complete() returns TRUE.  This
+arrangement makes it simple to use higher-quality decoding parameters
+for the final pass.  But if you don't want to use special parameters for
+the final pass, the right loop logic is like this:
+	for (;;) {
+	    absorb any waiting input by calling jpeg_consume_input()
+	    jpeg_start_output(&cinfo, cinfo.input_scan_number);
+	    ...
+	    jpeg_finish_output()
+	    if (jpeg_input_complete(&cinfo) &&
+	        cinfo.input_scan_number == cinfo.output_scan_number)
+	      break;
+	}
+In this case you don't need to know in advance whether an output pass is to
+be the last one, so it's not necessary to have reached EOF before starting
+the final output pass; rather, what you want to test is whether the output
+pass was performed in sync with the final input scan.  This form of the loop
+will avoid an extra output pass whenever the decoder is able (or nearly able)
+to keep up with the incoming data.
+
+When the data transmission speed is high, you might begin a display pass,
+then find that much or all of the file has arrived before you can complete
+the pass.  (You can detect this by noting the JPEG_REACHED_EOI return code
+from jpeg_consume_input(), or equivalently by testing jpeg_input_complete().)
+In this situation you may wish to abort the current display pass and start a
+new one using the newly arrived information.  To do so, just call
+jpeg_finish_output() and then start a new pass with jpeg_start_output().
+
+A variant strategy is to abort and restart display if more than one complete
+scan arrives during an output pass; this can be detected by noting
+JPEG_REACHED_SOS returns and/or examining cinfo.input_scan_number.  This
+idea should be employed with caution, however, since the display process
+might never get to the bottom of the image before being aborted, resulting
+in the lower part of the screen being several passes worse than the upper.
+In most cases it's probably best to abort an output pass only if the whole
+file has arrived and you want to begin the final output pass immediately.
+
+When receiving data across a communication link, we recommend always using
+the current input scan number for the output target scan number; if a
+higher-quality final pass is to be done, it should be started (aborting any
+incomplete output pass) as soon as the end of file is received.  However,
+many other strategies are possible.  For example, the application can examine
+the parameters of the current input scan and decide whether to display it or
+not.  If the scan contains only chroma data, one might choose not to use it
+as the target scan, expecting that the scan will be small and will arrive
+quickly.  To skip to the next scan, call jpeg_consume_input() until it
+returns JPEG_REACHED_SOS or JPEG_REACHED_EOI.  Or just use the next higher
+number as the target scan for jpeg_start_output(); but that method doesn't
+let you inspect the next scan's parameters before deciding to display it.
+
+
+In buffered-image mode, jpeg_start_decompress() never performs input and
+thus never suspends.  An application that uses input suspension with
+buffered-image mode must be prepared for suspension returns from these
+routines:
+* jpeg_start_output() performs input only if you request 2-pass quantization
+  and the target scan isn't fully read yet.  (This is discussed below.)
+* jpeg_read_scanlines(), as always, returns the number of scanlines that it
+  was able to produce before suspending.
+* jpeg_finish_output() will read any markers following the target scan,
+  up to the end of the file or the SOS marker that begins another scan.
+  (But it reads no input if jpeg_consume_input() has already reached the
+  end of the file or a SOS marker beyond the target output scan.)
+* jpeg_finish_decompress() will read until the end of file, and thus can
+  suspend if the end hasn't already been reached (as can be tested by
+  calling jpeg_input_complete()).
+jpeg_start_output(), jpeg_finish_output(), and jpeg_finish_decompress()
+all return TRUE if they completed their tasks, FALSE if they had to suspend.
+In the event of a FALSE return, the application must load more input data
+and repeat the call.  Applications that use non-suspending data sources need
+not check the return values of these three routines.
+
+
+It is possible to change decoding parameters between output passes in the
+buffered-image mode.  The decoder library currently supports only very
+limited changes of parameters.  ONLY THE FOLLOWING parameter changes are
+allowed after jpeg_start_decompress() is called:
+* dct_method can be changed before each call to jpeg_start_output().
+  For example, one could use a fast DCT method for early scans, changing
+  to a higher quality method for the final scan.
+* dither_mode can be changed before each call to jpeg_start_output();
+  of course this has no impact if not using color quantization.  Typically
+  one would use ordered dither for initial passes, then switch to
+  Floyd-Steinberg dither for the final pass.  Caution: changing dither mode
+  can cause more memory to be allocated by the library.  Although the amount
+  of memory involved is not large (a scanline or so), it may cause the
+  initial max_memory_to_use specification to be exceeded, which in the worst
+  case would result in an out-of-memory failure.
+* do_block_smoothing can be changed before each call to jpeg_start_output().
+  This setting is relevant only when decoding a progressive JPEG image.
+  During the first DC-only scan, block smoothing provides a very "fuzzy" look
+  instead of the very "blocky" look seen without it; which is better seems a
+  matter of personal taste.  But block smoothing is nearly always a win
+  during later stages, especially when decoding a successive-approximation
+  image: smoothing helps to hide the slight blockiness that otherwise shows
+  up on smooth gradients until the lowest coefficient bits are sent.
+* Color quantization mode can be changed under the rules described below.
+  You *cannot* change between full-color and quantized output (because that
+  would alter the required I/O buffer sizes), but you can change which
+  quantization method is used.
+
+When generating color-quantized output, changing quantization method is a
+very useful way of switching between high-speed and high-quality display.
+The library allows you to change among its three quantization methods:
+1. Single-pass quantization to a fixed color cube.
+   Selected by cinfo.two_pass_quantize = FALSE and cinfo.colormap = NULL.
+2. Single-pass quantization to an application-supplied colormap.
+   Selected by setting cinfo.colormap to point to the colormap (the value of
+   two_pass_quantize is ignored); also set cinfo.actual_number_of_colors.
+3. Two-pass quantization to a colormap chosen specifically for the image.
+   Selected by cinfo.two_pass_quantize = TRUE and cinfo.colormap = NULL.
+   (This is the default setting selected by jpeg_read_header, but it is
+   probably NOT what you want for the first pass of progressive display!)
+These methods offer successively better quality and lesser speed.  However,
+only the first method is available for quantizing in non-RGB color spaces.
+
+IMPORTANT: because the different quantizer methods have very different
+working-storage requirements, the library requires you to indicate which
+one(s) you intend to use before you call jpeg_start_decompress().  (If we did
+not require this, the max_memory_to_use setting would be a complete fiction.)
+You do this by setting one or more of these three cinfo fields to TRUE:
+	enable_1pass_quant		Fixed color cube colormap
+	enable_external_quant		Externally-supplied colormap
+	enable_2pass_quant		Two-pass custom colormap
+All three are initialized FALSE by jpeg_read_header().  But
+jpeg_start_decompress() automatically sets TRUE the one selected by the
+current two_pass_quantize and colormap settings, so you only need to set the
+enable flags for any other quantization methods you plan to change to later.
+
+After setting the enable flags correctly at jpeg_start_decompress() time, you
+can change to any enabled quantization method by setting two_pass_quantize
+and colormap properly just before calling jpeg_start_output().  The following
+special rules apply:
+1. You must explicitly set cinfo.colormap to NULL when switching to 1-pass
+   or 2-pass mode from a different mode, or when you want the 2-pass
+   quantizer to be re-run to generate a new colormap.
+2. To switch to an external colormap, or to change to a different external
+   colormap than was used on the prior pass, you must call
+   jpeg_new_colormap() after setting cinfo.colormap.
+NOTE: if you want to use the same colormap as was used in the prior pass,
+you should not do either of these things.  This will save some nontrivial
+switchover costs.
+(These requirements exist because cinfo.colormap will always be non-NULL
+after completing a prior output pass, since both the 1-pass and 2-pass
+quantizers set it to point to their output colormaps.  Thus you have to
+do one of these two things to notify the library that something has changed.
+Yup, it's a bit klugy, but it's necessary to do it this way for backwards
+compatibility.)
+
+Note that in buffered-image mode, the library generates any requested colormap
+during jpeg_start_output(), not during jpeg_start_decompress().
+
+When using two-pass quantization, jpeg_start_output() makes a pass over the
+buffered image to determine the optimum color map; it therefore may take a
+significant amount of time, whereas ordinarily it does little work.  The
+progress monitor hook is called during this pass, if defined.  It is also
+important to realize that if the specified target scan number is greater than
+or equal to the current input scan number, jpeg_start_output() will attempt
+to consume input as it makes this pass.  If you use a suspending data source,
+you need to check for a FALSE return from jpeg_start_output() under these
+conditions.  The combination of 2-pass quantization and a not-yet-fully-read
+target scan is the only case in which jpeg_start_output() will consume input.
+
+
+Application authors who support buffered-image mode may be tempted to use it
+for all JPEG images, even single-scan ones.  This will work, but it is
+inefficient: there is no need to create an image-sized coefficient buffer for
+single-scan images.  Requesting buffered-image mode for such an image wastes
+memory.  Worse, it can cost time on large images, since the buffered data has
+to be swapped out or written to a temporary file.  If you are concerned about
+maximum performance on baseline JPEG files, you should use buffered-image
+mode only when the incoming file actually has multiple scans.  This can be
+tested by calling jpeg_has_multiple_scans(), which will return a correct
+result at any time after jpeg_read_header() completes.
+
+It is also worth noting that when you use jpeg_consume_input() to let input
+processing get ahead of output processing, the resulting pattern of access to
+the coefficient buffer is quite nonsequential.  It's best to use the memory
+manager jmemnobs.c if you can (ie, if you have enough real or virtual main
+memory).  If not, at least make sure that max_memory_to_use is set as high as
+possible.  If the JPEG memory manager has to use a temporary file, you will
+probably see a lot of disk traffic and poor performance.  (This could be
+improved with additional work on the memory manager, but we haven't gotten
+around to it yet.)
+
+In some applications it may be convenient to use jpeg_consume_input() for all
+input processing, including reading the initial markers; that is, you may
+wish to call jpeg_consume_input() instead of jpeg_read_header() during
+startup.  This works, but note that you must check for JPEG_REACHED_SOS and
+JPEG_REACHED_EOI return codes as the equivalent of jpeg_read_header's codes.
+Once the first SOS marker has been reached, you must call
+jpeg_start_decompress() before jpeg_consume_input() will consume more input;
+it'll just keep returning JPEG_REACHED_SOS until you do.  If you read a
+tables-only file this way, jpeg_consume_input() will return JPEG_REACHED_EOI
+without ever returning JPEG_REACHED_SOS; be sure to check for this case.
+If this happens, the decompressor will not read any more input until you call
+jpeg_abort() to reset it.  It is OK to call jpeg_consume_input() even when not
+using buffered-image mode, but in that case it's basically a no-op after the
+initial markers have been read: it will just return JPEG_SUSPENDED.
+
+
+Abbreviated datastreams and multiple images
+-------------------------------------------
+
+A JPEG compression or decompression object can be reused to process multiple
+images.  This saves a small amount of time per image by eliminating the
+"create" and "destroy" operations, but that isn't the real purpose of the
+feature.  Rather, reuse of an object provides support for abbreviated JPEG
+datastreams.  Object reuse can also simplify processing a series of images in
+a single input or output file.  This section explains these features.
+
+A JPEG file normally contains several hundred bytes worth of quantization
+and Huffman tables.  In a situation where many images will be stored or
+transmitted with identical tables, this may represent an annoying overhead.
+The JPEG standard therefore permits tables to be omitted.  The standard
+defines three classes of JPEG datastreams:
+  * "Interchange" datastreams contain an image and all tables needed to decode
+     the image.  These are the usual kind of JPEG file.
+  * "Abbreviated image" datastreams contain an image, but are missing some or
+    all of the tables needed to decode that image.
+  * "Abbreviated table specification" (henceforth "tables-only") datastreams
+    contain only table specifications.
+To decode an abbreviated image, it is necessary to load the missing table(s)
+into the decoder beforehand.  This can be accomplished by reading a separate
+tables-only file.  A variant scheme uses a series of images in which the first
+image is an interchange (complete) datastream, while subsequent ones are
+abbreviated and rely on the tables loaded by the first image.  It is assumed
+that once the decoder has read a table, it will remember that table until a
+new definition for the same table number is encountered.
+
+It is the application designer's responsibility to figure out how to associate
+the correct tables with an abbreviated image.  While abbreviated datastreams
+can be useful in a closed environment, their use is strongly discouraged in
+any situation where data exchange with other applications might be needed.
+Caveat designer.
+
+The JPEG library provides support for reading and writing any combination of
+tables-only datastreams and abbreviated images.  In both compression and
+decompression objects, a quantization or Huffman table will be retained for
+the lifetime of the object, unless it is overwritten by a new table definition.
+
+
+To create abbreviated image datastreams, it is only necessary to tell the
+compressor not to emit some or all of the tables it is using.  Each
+quantization and Huffman table struct contains a boolean field "sent_table",
+which normally is initialized to FALSE.  For each table used by the image, the
+header-writing process emits the table and sets sent_table = TRUE unless it is
+already TRUE.  (In normal usage, this prevents outputting the same table
+definition multiple times, as would otherwise occur because the chroma
+components typically share tables.)  Thus, setting this field to TRUE before
+calling jpeg_start_compress() will prevent the table from being written at
+all.
+
+If you want to create a "pure" abbreviated image file containing no tables,
+just call "jpeg_suppress_tables(&cinfo, TRUE)" after constructing all the
+tables.  If you want to emit some but not all tables, you'll need to set the
+individual sent_table fields directly.
+
+To create an abbreviated image, you must also call jpeg_start_compress()
+with a second parameter of FALSE, not TRUE.  Otherwise jpeg_start_compress()
+will force all the sent_table fields to FALSE.  (This is a safety feature to
+prevent abbreviated images from being created accidentally.)
+
+To create a tables-only file, perform the same parameter setup that you
+normally would, but instead of calling jpeg_start_compress() and so on, call
+jpeg_write_tables(&cinfo).  This will write an abbreviated datastream
+containing only SOI, DQT and/or DHT markers, and EOI.  All the quantization
+and Huffman tables that are currently defined in the compression object will
+be emitted unless their sent_tables flag is already TRUE, and then all the
+sent_tables flags will be set TRUE.
+
+A sure-fire way to create matching tables-only and abbreviated image files
+is to proceed as follows:
+
+	create JPEG compression object
+	set JPEG parameters
+	set destination to tables-only file
+	jpeg_write_tables(&cinfo);
+	set destination to image file
+	jpeg_start_compress(&cinfo, FALSE);
+	write data...
+	jpeg_finish_compress(&cinfo);
+
+Since the JPEG parameters are not altered between writing the table file and
+the abbreviated image file, the same tables are sure to be used.  Of course,
+you can repeat the jpeg_start_compress() ... jpeg_finish_compress() sequence
+many times to produce many abbreviated image files matching the table file.
+
+You cannot suppress output of the computed Huffman tables when Huffman
+optimization is selected.  (If you could, there'd be no way to decode the
+image...)  Generally, you don't want to set optimize_coding = TRUE when
+you are trying to produce abbreviated files.
+
+In some cases you might want to compress an image using tables which are
+not stored in the application, but are defined in an interchange or
+tables-only file readable by the application.  This can be done by setting up
+a JPEG decompression object to read the specification file, then copying the
+tables into your compression object.  See jpeg_copy_critical_parameters()
+for an example of copying quantization tables.
+
+
+To read abbreviated image files, you simply need to load the proper tables
+into the decompression object before trying to read the abbreviated image.
+If the proper tables are stored in the application program, you can just
+allocate the table structs and fill in their contents directly.  For example,
+to load a fixed quantization table into table slot "n":
+
+    if (cinfo.quant_tbl_ptrs[n] == NULL)
+      cinfo.quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) &cinfo);
+    quant_ptr = cinfo.quant_tbl_ptrs[n];	/* quant_ptr is JQUANT_TBL* */
+    for (i = 0; i < 64; i++) {
+      /* Qtable[] is desired quantization table, in natural array order */
+      quant_ptr->quantval[i] = Qtable[i];
+    }
+
+Code to load a fixed Huffman table is typically (for AC table "n"):
+
+    if (cinfo.ac_huff_tbl_ptrs[n] == NULL)
+      cinfo.ac_huff_tbl_ptrs[n] = jpeg_alloc_huff_table((j_common_ptr) &cinfo);
+    huff_ptr = cinfo.ac_huff_tbl_ptrs[n];	/* huff_ptr is JHUFF_TBL* */
+    for (i = 1; i <= 16; i++) {
+      /* counts[i] is number of Huffman codes of length i bits, i=1..16 */
+      huff_ptr->bits[i] = counts[i];
+    }
+    for (i = 0; i < 256; i++) {
+      /* symbols[] is the list of Huffman symbols, in code-length order */
+      huff_ptr->huffval[i] = symbols[i];
+    }
+
+(Note that trying to set cinfo.quant_tbl_ptrs[n] to point directly at a
+constant JQUANT_TBL object is not safe.  If the incoming file happened to
+contain a quantization table definition, your master table would get
+overwritten!  Instead allocate a working table copy and copy the master table
+into it, as illustrated above.  Ditto for Huffman tables, of course.)
+
+You might want to read the tables from a tables-only file, rather than
+hard-wiring them into your application.  The jpeg_read_header() call is
+sufficient to read a tables-only file.  You must pass a second parameter of
+FALSE to indicate that you do not require an image to be present.  Thus, the
+typical scenario is
+
+	create JPEG decompression object
+	set source to tables-only file
+	jpeg_read_header(&cinfo, FALSE);
+	set source to abbreviated image file
+	jpeg_read_header(&cinfo, TRUE);
+	set decompression parameters
+	jpeg_start_decompress(&cinfo);
+	read data...
+	jpeg_finish_decompress(&cinfo);
+
+In some cases, you may want to read a file without knowing whether it contains
+an image or just tables.  In that case, pass FALSE and check the return value
+from jpeg_read_header(): it will be JPEG_HEADER_OK if an image was found,
+JPEG_HEADER_TABLES_ONLY if only tables were found.  (A third return value,
+JPEG_SUSPENDED, is possible when using a suspending data source manager.)
+Note that jpeg_read_header() will not complain if you read an abbreviated
+image for which you haven't loaded the missing tables; the missing-table check
+occurs later, in jpeg_start_decompress().
+
+
+It is possible to read a series of images from a single source file by
+repeating the jpeg_read_header() ... jpeg_finish_decompress() sequence,
+without releasing/recreating the JPEG object or the data source module.
+(If you did reinitialize, any partial bufferload left in the data source
+buffer at the end of one image would be discarded, causing you to lose the
+start of the next image.)  When you use this method, stored tables are
+automatically carried forward, so some of the images can be abbreviated images
+that depend on tables from earlier images.
+
+If you intend to write a series of images into a single destination file,
+you might want to make a specialized data destination module that doesn't
+flush the output buffer at term_destination() time.  This would speed things
+up by some trifling amount.  Of course, you'd need to remember to flush the
+buffer after the last image.  You can make the later images be abbreviated
+ones by passing FALSE to jpeg_start_compress().
+
+
+Special markers
+---------------
+
+Some applications may need to insert or extract special data in the JPEG
+datastream.  The JPEG standard provides marker types "COM" (comment) and
+"APP0" through "APP15" (application) to hold application-specific data.
+Unfortunately, the use of these markers is not specified by the standard.
+COM markers are fairly widely used to hold user-supplied text.  The JFIF file
+format spec uses APP0 markers with specified initial strings to hold certain
+data.  Adobe applications use APP14 markers beginning with the string "Adobe"
+for miscellaneous data.  Other APPn markers are rarely seen, but might
+contain almost anything.
+
+If you wish to store user-supplied text, we recommend you use COM markers
+and place readable 7-bit ASCII text in them.  Newline conventions are not
+standardized --- expect to find LF (Unix style), CR/LF (DOS style), or CR
+(Mac style).  A robust COM reader should be able to cope with random binary
+garbage, including nulls, since some applications generate COM markers
+containing non-ASCII junk.  (But yours should not be one of them.)
+
+For program-supplied data, use an APPn marker, and be sure to begin it with an
+identifying string so that you can tell whether the marker is actually yours.
+It's probably best to avoid using APP0 or APP14 for any private markers.
+(NOTE: the upcoming SPIFF standard will use APP8 markers; we recommend you
+not use APP8 markers for any private purposes, either.)
+
+Keep in mind that at most 65533 bytes can be put into one marker, but you
+can have as many markers as you like.
+
+By default, the IJG compression library will write a JFIF APP0 marker if the
+selected JPEG colorspace is grayscale or YCbCr, or an Adobe APP14 marker if
+the selected colorspace is RGB, CMYK, or YCCK.  You can disable this, but
+we don't recommend it.  The decompression library will recognize JFIF and
+Adobe markers and will set the JPEG colorspace properly when one is found.
+
+
+You can write special markers immediately following the datastream header by
+calling jpeg_write_marker() after jpeg_start_compress() and before the first
+call to jpeg_write_scanlines().  When you do this, the markers appear after
+the SOI and the JFIF APP0 and Adobe APP14 markers (if written), but before
+all else.  Specify the marker type parameter as "JPEG_COM" for COM or
+"JPEG_APP0 + n" for APPn.  (Actually, jpeg_write_marker will let you write
+any marker type, but we don't recommend writing any other kinds of marker.)
+For example, to write a user comment string pointed to by comment_text:
+	jpeg_write_marker(cinfo, JPEG_COM, comment_text, strlen(comment_text));
+
+If it's not convenient to store all the marker data in memory at once,
+you can instead call jpeg_write_m_header() followed by multiple calls to
+jpeg_write_m_byte().  If you do it this way, it's your responsibility to
+call jpeg_write_m_byte() exactly the number of times given in the length
+parameter to jpeg_write_m_header().  (This method lets you empty the
+output buffer partway through a marker, which might be important when
+using a suspending data destination module.  In any case, if you are using
+a suspending destination, you should flush its buffer after inserting
+any special markers.  See "I/O suspension".)
+
+Or, if you prefer to synthesize the marker byte sequence yourself,
+you can just cram it straight into the data destination module.
+
+If you are writing JFIF 1.02 extension markers (thumbnail images), don't
+forget to set cinfo.JFIF_minor_version = 2 so that the encoder will write the
+correct JFIF version number in the JFIF header marker.  The library's default
+is to write version 1.01, but that's wrong if you insert any 1.02 extension
+markers.  (We could probably get away with just defaulting to 1.02, but there
+used to be broken decoders that would complain about unknown minor version
+numbers.  To reduce compatibility risks it's safest not to write 1.02 unless
+you are actually using 1.02 extensions.)
+
+
+When reading, two methods of handling special markers are available:
+1. You can ask the library to save the contents of COM and/or APPn markers
+into memory, and then examine them at your leisure afterwards.
+2. You can supply your own routine to process COM and/or APPn markers
+on-the-fly as they are read.
+The first method is simpler to use, especially if you are using a suspending
+data source; writing a marker processor that copes with input suspension is
+not easy (consider what happens if the marker is longer than your available
+input buffer).  However, the second method conserves memory since the marker
+data need not be kept around after it's been processed.
+
+For either method, you'd normally set up marker handling after creating a
+decompression object and before calling jpeg_read_header(), because the
+markers of interest will typically be near the head of the file and so will
+be scanned by jpeg_read_header.  Once you've established a marker handling
+method, it will be used for the life of that decompression object
+(potentially many datastreams), unless you change it.  Marker handling is
+determined separately for COM markers and for each APPn marker code.
+
+
+To save the contents of special markers in memory, call
+	jpeg_save_markers(cinfo, marker_code, length_limit)
+where marker_code is the marker type to save, JPEG_COM or JPEG_APP0+n.
+(To arrange to save all the special marker types, you need to call this
+routine 17 times, for COM and APP0-APP15.)  If the incoming marker is longer
+than length_limit data bytes, only length_limit bytes will be saved; this
+parameter allows you to avoid chewing up memory when you only need to see the
+first few bytes of a potentially large marker.  If you want to save all the
+data, set length_limit to 0xFFFF; that is enough since marker lengths are only
+16 bits.  As a special case, setting length_limit to 0 prevents that marker
+type from being saved at all.  (That is the default behavior, in fact.)
+
+After jpeg_read_header() completes, you can examine the special markers by
+following the cinfo->marker_list pointer chain.  All the special markers in
+the file appear in this list, in order of their occurrence in the file (but
+omitting any markers of types you didn't ask for).  Both the original data
+length and the saved data length are recorded for each list entry; the latter
+will not exceed length_limit for the particular marker type.  Note that these
+lengths exclude the marker length word, whereas the stored representation
+within the JPEG file includes it.  (Hence the maximum data length is really
+only 65533.)
+
+It is possible that additional special markers appear in the file beyond the
+SOS marker at which jpeg_read_header stops; if so, the marker list will be
+extended during reading of the rest of the file.  This is not expected to be
+common, however.  If you are short on memory you may want to reset the length
+limit to zero for all marker types after finishing jpeg_read_header, to
+ensure that the max_memory_to_use setting cannot be exceeded due to addition
+of later markers.
+
+The marker list remains stored until you call jpeg_finish_decompress or
+jpeg_abort, at which point the memory is freed and the list is set to empty.
+(jpeg_destroy also releases the storage, of course.)
+
+Note that the library is internally interested in APP0 and APP14 markers;
+if you try to set a small nonzero length limit on these types, the library
+will silently force the length up to the minimum it wants.  (But you can set
+a zero length limit to prevent them from being saved at all.)  Also, in a
+16-bit environment, the maximum length limit may be constrained to less than
+65533 by malloc() limitations.  It is therefore best not to assume that the
+effective length limit is exactly what you set it to be.
+
+
+If you want to supply your own marker-reading routine, you do it by calling
+jpeg_set_marker_processor().  A marker processor routine must have the
+signature
+	boolean jpeg_marker_parser_method (j_decompress_ptr cinfo)
+Although the marker code is not explicitly passed, the routine can find it
+in cinfo->unread_marker.  At the time of call, the marker proper has been
+read from the data source module.  The processor routine is responsible for
+reading the marker length word and the remaining parameter bytes, if any.
+Return TRUE to indicate success.  (FALSE should be returned only if you are
+using a suspending data source and it tells you to suspend.  See the standard
+marker processors in jdmarker.c for appropriate coding methods if you need to
+use a suspending data source.)
+
+If you override the default APP0 or APP14 processors, it is up to you to
+recognize JFIF and Adobe markers if you want colorspace recognition to occur
+properly.  We recommend copying and extending the default processors if you
+want to do that.  (A better idea is to save these marker types for later
+examination by calling jpeg_save_markers(); that method doesn't interfere
+with the library's own processing of these markers.)
+
+jpeg_set_marker_processor() and jpeg_save_markers() are mutually exclusive
+--- if you call one it overrides any previous call to the other, for the
+particular marker type specified.
+
+A simple example of an external COM processor can be found in djpeg.c.
+Also, see jpegtran.c for an example of using jpeg_save_markers.
+
+
+Raw (downsampled) image data
+----------------------------
+
+Some applications need to supply already-downsampled image data to the JPEG
+compressor, or to receive raw downsampled data from the decompressor.  The
+library supports this requirement by allowing the application to write or
+read raw data, bypassing the normal preprocessing or postprocessing steps.
+The interface is different from the standard one and is somewhat harder to
+use.  If your interest is merely in bypassing color conversion, we recommend
+that you use the standard interface and simply set jpeg_color_space =
+in_color_space (or jpeg_color_space = out_color_space for decompression).
+The mechanism described in this section is necessary only to supply or
+receive downsampled image data, in which not all components have the same
+dimensions.
+
+
+To compress raw data, you must supply the data in the colorspace to be used
+in the JPEG file (please read the earlier section on Special color spaces)
+and downsampled to the sampling factors specified in the JPEG parameters.
+You must supply the data in the format used internally by the JPEG library,
+namely a JSAMPIMAGE array.  This is an array of pointers to two-dimensional
+arrays, each of type JSAMPARRAY.  Each 2-D array holds the values for one
+color component.  This structure is necessary since the components are of
+different sizes.  If the image dimensions are not a multiple of the MCU size,
+you must also pad the data correctly (usually, this is done by replicating
+the last column and/or row).  The data must be padded to a multiple of a DCT
+block in each component: that is, each downsampled row must contain a
+multiple of 8 valid samples, and there must be a multiple of 8 sample rows
+for each component.  (For applications such as conversion of digital TV
+images, the standard image size is usually a multiple of the DCT block size,
+so that no padding need actually be done.)
+
+The procedure for compression of raw data is basically the same as normal
+compression, except that you call jpeg_write_raw_data() in place of
+jpeg_write_scanlines().  Before calling jpeg_start_compress(), you must do
+the following:
+  * Set cinfo->raw_data_in to TRUE.  (It is set FALSE by jpeg_set_defaults().)
+    This notifies the library that you will be supplying raw data.
+    Furthermore, set cinfo->do_fancy_downsampling to FALSE if you want to use
+    real downsampled data.  (It is set TRUE by jpeg_set_defaults().)
+  * Ensure jpeg_color_space is correct --- an explicit jpeg_set_colorspace()
+    call is a good idea.  Note that since color conversion is bypassed,
+    in_color_space is ignored, except that jpeg_set_defaults() uses it to
+    choose the default jpeg_color_space setting.
+  * Ensure the sampling factors, cinfo->comp_info[i].h_samp_factor and
+    cinfo->comp_info[i].v_samp_factor, are correct.  Since these indicate the
+    dimensions of the data you are supplying, it's wise to set them
+    explicitly, rather than assuming the library's defaults are what you want.
+
+To pass raw data to the library, call jpeg_write_raw_data() in place of
+jpeg_write_scanlines().  The two routines work similarly except that
+jpeg_write_raw_data takes a JSAMPIMAGE data array rather than JSAMPARRAY.
+The scanlines count passed to and returned from jpeg_write_raw_data is
+measured in terms of the component with the largest v_samp_factor.
+
+jpeg_write_raw_data() processes one MCU row per call, which is to say
+v_samp_factor*DCTSIZE sample rows of each component.  The passed num_lines
+value must be at least max_v_samp_factor*DCTSIZE, and the return value will
+be exactly that amount (or possibly some multiple of that amount, in future
+library versions).  This is true even on the last call at the bottom of the
+image; don't forget to pad your data as necessary.
+
+The required dimensions of the supplied data can be computed for each
+component as
+	cinfo->comp_info[i].width_in_blocks*DCTSIZE  samples per row
+	cinfo->comp_info[i].height_in_blocks*DCTSIZE rows in image
+after jpeg_start_compress() has initialized those fields.  If the valid data
+is smaller than this, it must be padded appropriately.  For some sampling
+factors and image sizes, additional dummy DCT blocks are inserted to make
+the image a multiple of the MCU dimensions.  The library creates such dummy
+blocks itself; it does not read them from your supplied data.  Therefore you
+need never pad by more than DCTSIZE samples.  An example may help here.
+Assume 2h2v downsampling of YCbCr data, that is
+	cinfo->comp_info[0].h_samp_factor = 2		for Y
+	cinfo->comp_info[0].v_samp_factor = 2
+	cinfo->comp_info[1].h_samp_factor = 1		for Cb
+	cinfo->comp_info[1].v_samp_factor = 1
+	cinfo->comp_info[2].h_samp_factor = 1		for Cr
+	cinfo->comp_info[2].v_samp_factor = 1
+and suppose that the nominal image dimensions (cinfo->image_width and
+cinfo->image_height) are 101x101 pixels.  Then jpeg_start_compress() will
+compute downsampled_width = 101 and width_in_blocks = 13 for Y,
+downsampled_width = 51 and width_in_blocks = 7 for Cb and Cr (and the same
+for the height fields).  You must pad the Y data to at least 13*8 = 104
+columns and rows, the Cb/Cr data to at least 7*8 = 56 columns and rows.  The
+MCU height is max_v_samp_factor = 2 DCT rows so you must pass at least 16
+scanlines on each call to jpeg_write_raw_data(), which is to say 16 actual
+sample rows of Y and 8 each of Cb and Cr.  A total of 7 MCU rows are needed,
+so you must pass a total of 7*16 = 112 "scanlines".  The last DCT block row
+of Y data is dummy, so it doesn't matter what you pass for it in the data
+arrays, but the scanlines count must total up to 112 so that all of the Cb
+and Cr data gets passed.
+
+Output suspension is supported with raw-data compression: if the data
+destination module suspends, jpeg_write_raw_data() will return 0.
+In this case the same data rows must be passed again on the next call.
+
+
+Decompression with raw data output implies bypassing all postprocessing.
+You must deal with the color space and sampling factors present in the
+incoming file.  If your application only handles, say, 2h1v YCbCr data,
+you must check for and fail on other color spaces or other sampling factors.
+The library will not convert to a different color space for you.
+
+To obtain raw data output, set cinfo->raw_data_out = TRUE before
+jpeg_start_decompress() (it is set FALSE by jpeg_read_header()).  Be sure to
+verify that the color space and sampling factors are ones you can handle.
+Furthermore, set cinfo->do_fancy_upsampling = FALSE if you want to get real
+downsampled data (it is set TRUE by jpeg_read_header()).
+Then call jpeg_read_raw_data() in place of jpeg_read_scanlines().  The
+decompression process is otherwise the same as usual.
+
+jpeg_read_raw_data() returns one MCU row per call, and thus you must pass a
+buffer of at least max_v_samp_factor*DCTSIZE scanlines (scanline counting is
+the same as for raw-data compression).  The buffer you pass must be large
+enough to hold the actual data plus padding to DCT-block boundaries.  As with
+compression, any entirely dummy DCT blocks are not processed so you need not
+allocate space for them, but the total scanline count includes them.  The
+above example of computing buffer dimensions for raw-data compression is
+equally valid for decompression.
+
+Input suspension is supported with raw-data decompression: if the data source
+module suspends, jpeg_read_raw_data() will return 0.  You can also use
+buffered-image mode to read raw data in multiple passes.
+
+
+Really raw data: DCT coefficients
+---------------------------------
+
+It is possible to read or write the contents of a JPEG file as raw DCT
+coefficients.  This facility is mainly intended for use in lossless
+transcoding between different JPEG file formats.  Other possible applications
+include lossless cropping of a JPEG image, lossless reassembly of a
+multi-strip or multi-tile TIFF/JPEG file into a single JPEG datastream, etc.
+
+To read the contents of a JPEG file as DCT coefficients, open the file and do
+jpeg_read_header() as usual.  But instead of calling jpeg_start_decompress()
+and jpeg_read_scanlines(), call jpeg_read_coefficients().  This will read the
+entire image into a set of virtual coefficient-block arrays, one array per
+component.  The return value is a pointer to an array of virtual-array
+descriptors.  Each virtual array can be accessed directly using the JPEG
+memory manager's access_virt_barray method (see Memory management, below,
+and also read structure.txt's discussion of virtual array handling).  Or,
+for simple transcoding to a different JPEG file format, the array list can
+just be handed directly to jpeg_write_coefficients().
+
+Each block in the block arrays contains quantized coefficient values in
+normal array order (not JPEG zigzag order).  The block arrays contain only
+DCT blocks containing real data; any entirely-dummy blocks added to fill out
+interleaved MCUs at the right or bottom edges of the image are discarded
+during reading and are not stored in the block arrays.  (The size of each
+block array can be determined from the width_in_blocks and height_in_blocks
+fields of the component's comp_info entry.)  This is also the data format
+expected by jpeg_write_coefficients().
+
+When you are done using the virtual arrays, call jpeg_finish_decompress()
+to release the array storage and return the decompression object to an idle
+state; or just call jpeg_destroy() if you don't need to reuse the object.
+
+If you use a suspending data source, jpeg_read_coefficients() will return
+NULL if it is forced to suspend; a non-NULL return value indicates successful
+completion.  You need not test for a NULL return value when using a
+non-suspending data source.
+
+It is also possible to call jpeg_read_coefficients() to obtain access to the
+decoder's coefficient arrays during a normal decode cycle in buffered-image
+mode.  This frammish might be useful for progressively displaying an incoming
+image and then re-encoding it without loss.  To do this, decode in buffered-
+image mode as discussed previously, then call jpeg_read_coefficients() after
+the last jpeg_finish_output() call.  The arrays will be available for your use
+until you call jpeg_finish_decompress().
+
+
+To write the contents of a JPEG file as DCT coefficients, you must provide
+the DCT coefficients stored in virtual block arrays.  You can either pass
+block arrays read from an input JPEG file by jpeg_read_coefficients(), or
+allocate virtual arrays from the JPEG compression object and fill them
+yourself.  In either case, jpeg_write_coefficients() is substituted for
+jpeg_start_compress() and jpeg_write_scanlines().  Thus the sequence is
+  * Create compression object
+  * Set all compression parameters as necessary
+  * Request virtual arrays if needed
+  * jpeg_write_coefficients()
+  * jpeg_finish_compress()
+  * Destroy or re-use compression object
+jpeg_write_coefficients() is passed a pointer to an array of virtual block
+array descriptors; the number of arrays is equal to cinfo.num_components.
+
+The virtual arrays need only have been requested, not realized, before
+jpeg_write_coefficients() is called.  A side-effect of
+jpeg_write_coefficients() is to realize any virtual arrays that have been
+requested from the compression object's memory manager.  Thus, when obtaining
+the virtual arrays from the compression object, you should fill the arrays
+after calling jpeg_write_coefficients().  The data is actually written out
+when you call jpeg_finish_compress(); jpeg_write_coefficients() only writes
+the file header.
+
+When writing raw DCT coefficients, it is crucial that the JPEG quantization
+tables and sampling factors match the way the data was encoded, or the
+resulting file will be invalid.  For transcoding from an existing JPEG file,
+we recommend using jpeg_copy_critical_parameters().  This routine initializes
+all the compression parameters to default values (like jpeg_set_defaults()),
+then copies the critical information from a source decompression object.
+The decompression object should have just been used to read the entire
+JPEG input file --- that is, it should be awaiting jpeg_finish_decompress().
+
+jpeg_write_coefficients() marks all tables stored in the compression object
+as needing to be written to the output file (thus, it acts like
+jpeg_start_compress(cinfo, TRUE)).  This is for safety's sake, to avoid
+emitting abbreviated JPEG files by accident.  If you really want to emit an
+abbreviated JPEG file, call jpeg_suppress_tables(), or set the tables'
+individual sent_table flags, between calling jpeg_write_coefficients() and
+jpeg_finish_compress().
+
+
+Progress monitoring
+-------------------
+
+Some applications may need to regain control from the JPEG library every so
+often.  The typical use of this feature is to produce a percent-done bar or
+other progress display.  (For a simple example, see cjpeg.c or djpeg.c.)
+Although you do get control back frequently during the data-transferring pass
+(the jpeg_read_scanlines or jpeg_write_scanlines loop), any additional passes
+will occur inside jpeg_finish_compress or jpeg_start_decompress; those
+routines may take a long time to execute, and you don't get control back
+until they are done.
+
+You can define a progress-monitor routine which will be called periodically
+by the library.  No guarantees are made about how often this call will occur,
+so we don't recommend you use it for mouse tracking or anything like that.
+At present, a call will occur once per MCU row, scanline, or sample row
+group, whichever unit is convenient for the current processing mode; so the
+wider the image, the longer the time between calls.  During the data
+transferring pass, only one call occurs per call of jpeg_read_scanlines or
+jpeg_write_scanlines, so don't pass a large number of scanlines at once if
+you want fine resolution in the progress count.  (If you really need to use
+the callback mechanism for time-critical tasks like mouse tracking, you could
+insert additional calls inside some of the library's inner loops.)
+
+To establish a progress-monitor callback, create a struct jpeg_progress_mgr,
+fill in its progress_monitor field with a pointer to your callback routine,
+and set cinfo->progress to point to the struct.  The callback will be called
+whenever cinfo->progress is non-NULL.  (This pointer is set to NULL by
+jpeg_create_compress or jpeg_create_decompress; the library will not change
+it thereafter.  So if you allocate dynamic storage for the progress struct,
+make sure it will live as long as the JPEG object does.  Allocating from the
+JPEG memory manager with lifetime JPOOL_PERMANENT will work nicely.)  You
+can use the same callback routine for both compression and decompression.
+
+The jpeg_progress_mgr struct contains four fields which are set by the library:
+	long pass_counter;	/* work units completed in this pass */
+	long pass_limit;	/* total number of work units in this pass */
+	int completed_passes;	/* passes completed so far */
+	int total_passes;	/* total number of passes expected */
+During any one pass, pass_counter increases from 0 up to (not including)
+pass_limit; the step size is usually but not necessarily 1.  The pass_limit
+value may change from one pass to another.  The expected total number of
+passes is in total_passes, and the number of passes already completed is in
+completed_passes.  Thus the fraction of work completed may be estimated as
+		completed_passes + (pass_counter/pass_limit)
+		--------------------------------------------
+				total_passes
+ignoring the fact that the passes may not be equal amounts of work.
+
+When decompressing, pass_limit can even change within a pass, because it
+depends on the number of scans in the JPEG file, which isn't always known in
+advance.  The computed fraction-of-work-done may jump suddenly (if the library
+discovers it has overestimated the number of scans) or even decrease (in the
+opposite case).  It is not wise to put great faith in the work estimate.
+
+When using the decompressor's buffered-image mode, the progress monitor work
+estimate is likely to be completely unhelpful, because the library has no way
+to know how many output passes will be demanded of it.  Currently, the library
+sets total_passes based on the assumption that there will be one more output
+pass if the input file end hasn't yet been read (jpeg_input_complete() isn't
+TRUE), but no more output passes if the file end has been reached when the
+output pass is started.  This means that total_passes will rise as additional
+output passes are requested.  If you have a way of determining the input file
+size, estimating progress based on the fraction of the file that's been read
+will probably be more useful than using the library's value.
+
+
+Memory management
+-----------------
+
+This section covers some key facts about the JPEG library's built-in memory
+manager.  For more info, please read structure.txt's section about the memory
+manager, and consult the source code if necessary.
+
+All memory and temporary file allocation within the library is done via the
+memory manager.  If necessary, you can replace the "back end" of the memory
+manager to control allocation yourself (for example, if you don't want the
+library to use malloc() and free() for some reason).
+
+Some data is allocated "permanently" and will not be freed until the JPEG
+object is destroyed.  Most data is allocated "per image" and is freed by
+jpeg_finish_compress, jpeg_finish_decompress, or jpeg_abort.  You can call the
+memory manager yourself to allocate structures that will automatically be
+freed at these times.  Typical code for this is
+  ptr = (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, size);
+Use JPOOL_PERMANENT to get storage that lasts as long as the JPEG object.
+Use alloc_large instead of alloc_small for anything bigger than a few Kbytes.
+There are also alloc_sarray and alloc_barray routines that automatically
+build 2-D sample or block arrays.
+
+The library's minimum space requirements to process an image depend on the
+image's width, but not on its height, because the library ordinarily works
+with "strip" buffers that are as wide as the image but just a few rows high.
+Some operating modes (eg, two-pass color quantization) require full-image
+buffers.  Such buffers are treated as "virtual arrays": only the current strip
+need be in memory, and the rest can be swapped out to a temporary file.
+
+If you use the simplest memory manager back end (jmemnobs.c), then no
+temporary files are used; virtual arrays are simply malloc()'d.  Images bigger
+than memory can be processed only if your system supports virtual memory.
+The other memory manager back ends support temporary files of various flavors
+and thus work in machines without virtual memory.  They may also be useful on
+Unix machines if you need to process images that exceed available swap space.
+
+When using temporary files, the library will make the in-memory buffers for
+its virtual arrays just big enough to stay within a "maximum memory" setting.
+Your application can set this limit by setting cinfo->mem->max_memory_to_use
+after creating the JPEG object.  (Of course, there is still a minimum size for
+the buffers, so the max-memory setting is effective only if it is bigger than
+the minimum space needed.)  If you allocate any large structures yourself, you
+must allocate them before jpeg_start_compress() or jpeg_start_decompress() in
+order to have them counted against the max memory limit.  Also keep in mind
+that space allocated with alloc_small() is ignored, on the assumption that
+it's too small to be worth worrying about; so a reasonable safety margin
+should be left when setting max_memory_to_use.
+
+If you use the jmemname.c or jmemdos.c memory manager back end, it is
+important to clean up the JPEG object properly to ensure that the temporary
+files get deleted.  (This is especially crucial with jmemdos.c, where the
+"temporary files" may be extended-memory segments; if they are not freed,
+DOS will require a reboot to recover the memory.)  Thus, with these memory
+managers, it's a good idea to provide a signal handler that will trap any
+early exit from your program.  The handler should call either jpeg_abort()
+or jpeg_destroy() for any active JPEG objects.  A handler is not needed with
+jmemnobs.c, and shouldn't be necessary with jmemansi.c or jmemmac.c either,
+since the C library is supposed to take care of deleting files made with
+tmpfile().
+
+
+Memory usage
+------------
+
+Working memory requirements while performing compression or decompression
+depend on image dimensions, image characteristics (such as colorspace and
+JPEG process), and operating mode (application-selected options).
+
+As of v6b, the decompressor requires:
+ 1. About 24K in more-or-less-fixed-size data.  This varies a bit depending
+    on operating mode and image characteristics (particularly color vs.
+    grayscale), but it doesn't depend on image dimensions.
+ 2. Strip buffers (of size proportional to the image width) for IDCT and
+    upsampling results.  The worst case for commonly used sampling factors
+    is about 34 bytes * width in pixels for a color image.  A grayscale image
+    only needs about 8 bytes per pixel column.
+ 3. A full-image DCT coefficient buffer is needed to decode a multi-scan JPEG
+    file (including progressive JPEGs), or whenever you select buffered-image
+    mode.  This takes 2 bytes/coefficient.  At typical 2x2 sampling, that's
+    3 bytes per pixel for a color image.  Worst case (1x1 sampling) requires
+    6 bytes/pixel.  For grayscale, figure 2 bytes/pixel.
+ 4. To perform 2-pass color quantization, the decompressor also needs a
+    128K color lookup table and a full-image pixel buffer (3 bytes/pixel).
+This does not count any memory allocated by the application, such as a
+buffer to hold the final output image.
+
+The above figures are valid for 8-bit JPEG data precision and a machine with
+32-bit ints.  For 12-bit JPEG data, double the size of the strip buffers and
+quantization pixel buffer.  The "fixed-size" data will be somewhat smaller
+with 16-bit ints, larger with 64-bit ints.  Also, CMYK or other unusual
+color spaces will require different amounts of space.
+
+The full-image coefficient and pixel buffers, if needed at all, do not
+have to be fully RAM resident; you can have the library use temporary
+files instead when the total memory usage would exceed a limit you set.
+(But if your OS supports virtual memory, it's probably better to just use
+jmemnobs and let the OS do the swapping.)
+
+The compressor's memory requirements are similar, except that it has no need
+for color quantization.  Also, it needs a full-image DCT coefficient buffer
+if Huffman-table optimization is asked for, even if progressive mode is not
+requested.
+
+If you need more detailed information about memory usage in a particular
+situation, you can enable the MEM_STATS code in jmemmgr.c.
+
+
+Library compile-time options
+----------------------------
+
+A number of compile-time options are available by modifying jmorecfg.h.
+
+The JPEG standard provides for both the baseline 8-bit DCT process and
+a 12-bit DCT process.  The IJG code supports 12-bit JPEG if you define
+BITS_IN_JSAMPLE as 12 rather than 8.  Note that this causes JSAMPLE to be
+larger than a char, so it affects the surrounding application's image data.
+The sample applications cjpeg and djpeg can support 12-bit mode only for PPM
+and GIF file formats; you must disable the other file formats to compile a
+12-bit cjpeg or djpeg.  (install.txt has more information about that.)
+At present, a 12-bit library can handle *only* 12-bit images, not both
+precisions.  (If you need to include both 8- and 12-bit libraries in a single
+application, you could probably do it by defining NEED_SHORT_EXTERNAL_NAMES
+for just one of the copies.  You'd have to access the 8-bit and 12-bit copies
+from separate application source files.  This is untested ... if you try it,
+we'd like to hear whether it works!)
+
+Note that a 12-bit library always compresses in Huffman optimization mode,
+in order to generate valid Huffman tables.  This is necessary because our
+default Huffman tables only cover 8-bit data.  If you need to output 12-bit
+files in one pass, you'll have to supply suitable default Huffman tables.
+You may also want to supply your own DCT quantization tables; the existing
+quality-scaling code has been developed for 8-bit use, and probably doesn't
+generate especially good tables for 12-bit.
+
+The maximum number of components (color channels) in the image is determined
+by MAX_COMPONENTS.  The JPEG standard allows up to 255 components, but we
+expect that few applications will need more than four or so.
+
+On machines with unusual data type sizes, you may be able to improve
+performance or reduce memory space by tweaking the various typedefs in
+jmorecfg.h.  In particular, on some RISC CPUs, access to arrays of "short"s
+is quite slow; consider trading memory for speed by making JCOEF, INT16, and
+UINT16 be "int" or "unsigned int".  UINT8 is also a candidate to become int.
+You probably don't want to make JSAMPLE be int unless you have lots of memory
+to burn.
+
+You can reduce the size of the library by compiling out various optional
+functions.  To do this, undefine xxx_SUPPORTED symbols as necessary.
+
+You can also save a few K by not having text error messages in the library;
+the standard error message table occupies about 5Kb.  This is particularly
+reasonable for embedded applications where there's no good way to display 
+a message anyway.  To do this, remove the creation of the message table
+(jpeg_std_message_table[]) from jerror.c, and alter format_message to do
+something reasonable without it.  You could output the numeric value of the
+message code number, for example.  If you do this, you can also save a couple
+more K by modifying the TRACEMSn() macros in jerror.h to expand to nothing;
+you don't need trace capability anyway, right?
+
+
+Portability considerations
+--------------------------
+
+The JPEG library has been written to be extremely portable; the sample
+applications cjpeg and djpeg are slightly less so.  This section summarizes
+the design goals in this area.  (If you encounter any bugs that cause the
+library to be less portable than is claimed here, we'd appreciate hearing
+about them.)
+
+The code works fine on ANSI C, C++, and pre-ANSI C compilers, using any of
+the popular system include file setups, and some not-so-popular ones too.
+See install.txt for configuration procedures.
+
+The code is not dependent on the exact sizes of the C data types.  As
+distributed, we make the assumptions that
+	char	is at least 8 bits wide
+	short	is at least 16 bits wide
+	int	is at least 16 bits wide
+	long	is at least 32 bits wide
+(These are the minimum requirements of the ANSI C standard.)  Wider types will
+work fine, although memory may be used inefficiently if char is much larger
+than 8 bits or short is much bigger than 16 bits.  The code should work
+equally well with 16- or 32-bit ints.
+
+In a system where these assumptions are not met, you may be able to make the
+code work by modifying the typedefs in jmorecfg.h.  However, you will probably
+have difficulty if int is less than 16 bits wide, since references to plain
+int abound in the code.
+
+char can be either signed or unsigned, although the code runs faster if an
+unsigned char type is available.  If char is wider than 8 bits, you will need
+to redefine JOCTET and/or provide custom data source/destination managers so
+that JOCTET represents exactly 8 bits of data on external storage.
+
+The JPEG library proper does not assume ASCII representation of characters.
+But some of the image file I/O modules in cjpeg/djpeg do have ASCII
+dependencies in file-header manipulation; so does cjpeg's select_file_type()
+routine.
+
+The JPEG library does not rely heavily on the C library.  In particular, C
+stdio is used only by the data source/destination modules and the error
+handler, all of which are application-replaceable.  (cjpeg/djpeg are more
+heavily dependent on stdio.)  malloc and free are called only from the memory
+manager "back end" module, so you can use a different memory allocator by
+replacing that one file.
+
+The code generally assumes that C names must be unique in the first 15
+characters.  However, global function names can be made unique in the
+first 6 characters by defining NEED_SHORT_EXTERNAL_NAMES.
+
+More info about porting the code may be gleaned by reading jconfig.txt,
+jmorecfg.h, and jinclude.h.
+
+
+Notes for MS-DOS implementors
+-----------------------------
+
+The IJG code is designed to work efficiently in 80x86 "small" or "medium"
+memory models (i.e., data pointers are 16 bits unless explicitly declared
+"far"; code pointers can be either size).  You may be able to use small
+model to compile cjpeg or djpeg by itself, but you will probably have to use
+medium model for any larger application.  This won't make much difference in
+performance.  You *will* take a noticeable performance hit if you use a
+large-data memory model (perhaps 10%-25%), and you should avoid "huge" model
+if at all possible.
+
+The JPEG library typically needs 2Kb-3Kb of stack space.  It will also
+malloc about 20K-30K of near heap space while executing (and lots of far
+heap, but that doesn't count in this calculation).  This figure will vary
+depending on selected operating mode, and to a lesser extent on image size.
+There is also about 5Kb-6Kb of constant data which will be allocated in the
+near data segment (about 4Kb of this is the error message table).
+Thus you have perhaps 20K available for other modules' static data and near
+heap space before you need to go to a larger memory model.  The C library's
+static data will account for several K of this, but that still leaves a good
+deal for your needs.  (If you are tight on space, you could reduce the sizes
+of the I/O buffers allocated by jdatasrc.c and jdatadst.c, say from 4K to
+1K.  Another possibility is to move the error message table to far memory;
+this should be doable with only localized hacking on jerror.c.)
+
+About 2K of the near heap space is "permanent" memory that will not be
+released until you destroy the JPEG object.  This is only an issue if you
+save a JPEG object between compression or decompression operations.
+
+Far data space may also be a tight resource when you are dealing with large
+images.  The most memory-intensive case is decompression with two-pass color
+quantization, or single-pass quantization to an externally supplied color
+map.  This requires a 128Kb color lookup table plus strip buffers amounting
+to about 40 bytes per column for typical sampling ratios (eg, about 25600
+bytes for a 640-pixel-wide image).  You may not be able to process wide
+images if you have large data structures of your own.
+
+Of course, all of these concerns vanish if you use a 32-bit flat-memory-model
+compiler, such as DJGPP or Watcom C.  We highly recommend flat model if you
+can use it; the JPEG library is significantly faster in flat model.
diff --git a/jpeg-8d/ltmain.sh b/jpeg-8d/ltmain.sh
new file mode 100644
index 0000000..63ae69d
--- /dev/null
+++ b/jpeg-8d/ltmain.sh
@@ -0,0 +1,9655 @@
+
+# libtool (GNU libtool) 2.4.2
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+#       --config             show all configuration variables
+#       --debug              enable verbose shell tracing
+#   -n, --dry-run            display commands without modifying any files
+#       --features           display basic configuration information and exit
+#       --mode=MODE          use operation mode MODE
+#       --preserve-dup-deps  don't remove duplicate dependency libraries
+#       --quiet, --silent    don't print informational messages
+#       --no-quiet, --no-silent
+#                            print informational messages (default)
+#       --no-warn            don't display warning messages
+#       --tag=TAG            use configuration variables from tag TAG
+#   -v, --verbose            print more informational messages than default
+#       --no-verbose         don't print the extra informational messages
+#       --version            print version information
+#   -h, --help, --help-all   print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+#         clean              remove files from the build directory
+#         compile            compile a source file into a libtool object
+#         execute            automatically set library path, then run a program
+#         finish             complete the installation of libtool libraries
+#         install            install libraries or executables
+#         link               create a library or an executable
+#         uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.  When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#         host-triplet:	$host
+#         shell:		$SHELL
+#         compiler:		$LTCC
+#         compiler flags:		$LTCFLAGS
+#         linker:		$LD (gnu? $with_gnu_ld)
+#         $progname:	(GNU libtool) 2.4.2
+#         automake:	$automake_version
+#         autoconf:	$autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.2
+TIMESTAMP=""
+package_revision=1.3337
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+          save_$lt_var=\$$lt_var
+          $lt_var=C
+	  export $lt_var
+	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+	fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+    # Extract subdirectory from the argument.
+    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+    case ${2} in
+      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+		s@/\./@/@g
+		t dotsl
+		s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+#             value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+  # Start from root dir and reassemble the path.
+  func_normal_abspath_result=
+  func_normal_abspath_tpath=$1
+  func_normal_abspath_altnamespace=
+  case $func_normal_abspath_tpath in
+    "")
+      # Empty path, that just means $cwd.
+      func_stripname '' '/' "`pwd`"
+      func_normal_abspath_result=$func_stripname_result
+      return
+    ;;
+    # The next three entries are used to spot a run of precisely
+    # two leading slashes without using negated character classes;
+    # we take advantage of case's first-match behaviour.
+    ///*)
+      # Unusual form of absolute path, do nothing.
+    ;;
+    //*)
+      # Not necessarily an ordinary path; POSIX reserves leading '//'
+      # and for example Cygwin uses it to access remote file shares
+      # over CIFS/SMB, so we conserve a leading double slash if found.
+      func_normal_abspath_altnamespace=/
+    ;;
+    /*)
+      # Absolute path, do nothing.
+    ;;
+    *)
+      # Relative path, prepend $cwd.
+      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+    ;;
+  esac
+  # Cancel out all the simple stuff to save iterations.  We also want
+  # the path to end with a slash for ease of parsing, so make sure
+  # there is one (and only one) here.
+  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+  while :; do
+    # Processed it all yet?
+    if test "$func_normal_abspath_tpath" = / ; then
+      # If we ascended to the root using ".." the result may be empty now.
+      if test -z "$func_normal_abspath_result" ; then
+        func_normal_abspath_result=/
+      fi
+      break
+    fi
+    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcar"`
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcdr"`
+    # Figure out what to do with it
+    case $func_normal_abspath_tcomponent in
+      "")
+        # Trailing empty path component, ignore it.
+      ;;
+      ..)
+        # Parent dir; strip last assembled component from result.
+        func_dirname "$func_normal_abspath_result"
+        func_normal_abspath_result=$func_dirname_result
+      ;;
+      *)
+        # Actual path component, append it.
+        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+      ;;
+    esac
+  done
+  # Restore leading double-slash if one was found on entry.
+  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+#             value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+  func_relative_path_result=
+  func_normal_abspath "$1"
+  func_relative_path_tlibdir=$func_normal_abspath_result
+  func_normal_abspath "$2"
+  func_relative_path_tbindir=$func_normal_abspath_result
+
+  # Ascend the tree starting from libdir
+  while :; do
+    # check if we have found a prefix of bindir
+    case $func_relative_path_tbindir in
+      $func_relative_path_tlibdir)
+        # found an exact match
+        func_relative_path_tcancelled=
+        break
+        ;;
+      $func_relative_path_tlibdir*)
+        # found a matching prefix
+        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+        func_relative_path_tcancelled=$func_stripname_result
+        if test -z "$func_relative_path_result"; then
+          func_relative_path_result=.
+        fi
+        break
+        ;;
+      *)
+        func_dirname $func_relative_path_tlibdir
+        func_relative_path_tlibdir=${func_dirname_result}
+        if test "x$func_relative_path_tlibdir" = x ; then
+          # Have to descend all the way to the root!
+          func_relative_path_result=../$func_relative_path_result
+          func_relative_path_tcancelled=$func_relative_path_tbindir
+          break
+        fi
+        func_relative_path_result=../$func_relative_path_result
+        ;;
+    esac
+  done
+
+  # Now calculate path; take care to avoid doubling-up slashes.
+  func_stripname '' '/' "$func_relative_path_result"
+  func_relative_path_result=$func_stripname_result
+  func_stripname '/' '/' "$func_relative_path_tcancelled"
+  if test "x$func_stripname_result" != x ; then
+    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+  fi
+
+  # Normalisation. If bindir is libdir, return empty string,
+  # else relative path ending with a slash; either way, target
+  # file name can be directly appended.
+  if test ! -z "$func_relative_path_result"; then
+    func_stripname './' '' "$func_relative_path_result/"
+    func_relative_path_result=$func_stripname_result
+  fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=$func_dirname_result
+     progdir=`cd "$progdir" && pwd`
+     progpath="$progdir/$progname"
+     ;;
+  *)
+     save_IFS="$IFS"
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS="$save_IFS"
+       test -x "$progdir/$progname" && break
+     done
+     IFS="$save_IFS"
+     test -n "$progdir" || progdir=`pwd`
+     progpath="$progdir/$progname"
+     ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $opt_verbose && func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    my_directory_path="$1"
+    my_dir_list=
+
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$my_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        my_dir_list="$my_directory_path:$my_dir_list"
+
+        # If the last portion added has no slash in it, the list is done
+        case $my_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+      done
+      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$my_dir" 2>/dev/null || :
+      done
+      IFS="$save_mkdir_p_IFS"
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
+    fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$opt_dry_run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+        save_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+    fi
+
+    $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
+
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+    esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    case $1 in
+      *[\\\`\"]*)
+	my_arg=`$ECHO "$1" | $SED \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        my_arg="$1" ;;
+    esac
+
+    case $my_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        my_arg="\"$my_arg\""
+        ;;
+    esac
+
+    func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+  case $1 in
+  [0-9]* | *[!a-zA-Z0-9_]*)
+    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+    ;;
+  * )
+    func_tr_sh_result=$1
+    ;;
+  esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $opt_debug
+
+    $SED -n '/(C)/!b go
+	:more
+	/\./!{
+	  N
+	  s/\n# / /
+	  b more
+	}
+	:go
+	/^# '$PROGRAM' (GNU /,/# warranty; / {
+        s/^# //
+	s/^# *$//
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+        p
+     }' < "$progpath"
+     exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+        s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+    }' < "$progpath"
+    echo
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+	:print
+        s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+	p
+	d
+     }
+     /^# .* home page:/b print
+     /^# General help using/b print
+     ' < "$progpath"
+    ret=$?
+    if test -z "$1"; then
+      exit $ret
+    fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    $opt_debug
+
+    func_error "missing argument for $1."
+    exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+    my_sed_long_arg='1s/^--[^=]*=//'
+
+    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+    eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+    func_quote_for_eval "${2}"
+    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+    func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func_error ${1+"$@"}
+    func_error "See the $PACKAGE documentation for more information."
+    func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
+
+    exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+
+    exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+  # Global variable:
+  tagname="$1"
+
+  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+  sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+  # Validate tagname.
+  case $tagname in
+    *[!-_A-Za-z0-9,/]*)
+      func_fatal_error "invalid tag name: $tagname"
+      ;;
+  esac
+
+  # Don't test for the "default" C tag, as we know it's
+  # there but not specially marked.
+  case $tagname in
+    CC) ;;
+    *)
+      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	taglist="$taglist $tagname"
+
+	# Evaluate the configuration.  Be careful to quote the path
+	# and the sed script, to avoid splitting on whitespace, but
+	# also don't use non-portable quotes within backquotes within
+	# quotes we have to do it in 2 steps:
+	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	eval "$extractedcf"
+      else
+	func_error "ignoring unknown tag $tagname"
+      fi
+      ;;
+  esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      fi
+    else
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+    fi
+
+    exit $EXIT_MISMATCH
+  fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+  shift; set dummy --mode clean ${1+"$@"}; shift
+  ;;
+compile|compil|compi|comp|com|co|c)
+  shift; set dummy --mode compile ${1+"$@"}; shift
+  ;;
+execute|execut|execu|exec|exe|ex|e)
+  shift; set dummy --mode execute ${1+"$@"}; shift
+  ;;
+finish|finis|fini|fin|fi|f)
+  shift; set dummy --mode finish ${1+"$@"}; shift
+  ;;
+install|instal|insta|inst|ins|in|i)
+  shift; set dummy --mode install ${1+"$@"}; shift
+  ;;
+link|lin|li|l)
+  shift; set dummy --mode link ${1+"$@"}; shift
+  ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+  shift; set dummy --mode uninstall ${1+"$@"}; shift
+  ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly.  This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+  # this just eases exit handling
+  while test $# -gt 0; do
+    opt="$1"
+    shift
+    case $opt in
+      --debug|-x)	opt_debug='set -x'
+			func_echo "enabling shell trace mode"
+			$opt_debug
+			;;
+      --dry-run|--dryrun|-n)
+			opt_dry_run=:
+			;;
+      --config)
+			opt_config=:
+func_config
+			;;
+      --dlopen|-dlopen)
+			optarg="$1"
+			opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+			shift
+			;;
+      --preserve-dup-deps)
+			opt_preserve_dup_deps=:
+			;;
+      --features)
+			opt_features=:
+func_features
+			;;
+      --finish)
+			opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+			;;
+      --help)
+			opt_help=:
+			;;
+      --help-all)
+			opt_help_all=:
+opt_help=': help-all'
+			;;
+      --mode)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_mode="$optarg"
+case $optarg in
+  # Valid mode arguments:
+  clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+  # Catch anything else as an error
+  *) func_error "invalid argument for $opt"
+     exit_cmd=exit
+     break
+     ;;
+esac
+			shift
+			;;
+      --no-silent|--no-quiet)
+			opt_silent=false
+func_append preserve_args " $opt"
+			;;
+      --no-warning|--no-warn)
+			opt_warning=false
+func_append preserve_args " $opt"
+			;;
+      --no-verbose)
+			opt_verbose=false
+func_append preserve_args " $opt"
+			;;
+      --silent|--quiet)
+			opt_silent=:
+func_append preserve_args " $opt"
+        opt_verbose=false
+			;;
+      --verbose|-v)
+			opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+			;;
+      --tag)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+			shift
+			;;
+
+      -\?|-h)		func_usage				;;
+      --help)		func_help				;;
+      --version)	func_version				;;
+
+      # Separate optargs to long options:
+      --*=*)
+			func_split_long_opt "$opt"
+			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      # Separate non-argument short options:
+      -\?*|-h*|-n*|-v*)
+			func_split_short_opt "$opt"
+			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      --)		break					;;
+      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
+      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+    esac
+  done
+
+  # Validate options:
+
+  # save first non-option argument
+  if test "$#" -gt 0; then
+    nonopt="$opt"
+    shift
+  fi
+
+  # preserve --debug
+  test "$opt_debug" = : || func_append preserve_args " --debug"
+
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
+      ;;
+    *)
+      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+      ;;
+  esac
+
+  $opt_help || {
+    # Sanity checks first:
+    func_check_version_match
+
+    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+      func_fatal_configuration "not configured to build any kind of library"
+    fi
+
+    # Darwin sucks
+    eval std_shrext=\"$shrext_cmds\"
+
+    # Only execute mode is allowed to have -dlopen flags.
+    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+      func_error "unrecognized option \`-dlopen'"
+      $ECHO "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Change the help message to a mode-specific one.
+    generic_help="$help"
+    help="Try \`$progname --help --mode=$opt_mode' for more information."
+  }
+
+
+  # Bail if the options were screwed
+  $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case "$lalib_p_line" in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $opt_debug
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$save_ifs
+      eval cmd=\"$cmd\"
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $opt_debug
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case "$lt_sysroot:$1" in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result="=$func_stripname_result"
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $opt_debug
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	func_append_quoted CC_quoted "$arg"
+      done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_append_quoted CC_quoted "$arg"
+	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+	    case "$@ " in
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with \`--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=${1}
+    if test "$build_libtool_libs" = yes; then
+      write_lobj=\'${2}\'
+    else
+      write_lobj=none
+    fi
+
+    if test "$build_old_libs" = yes; then
+      write_oldobj=\'${3}\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "${write_libobj}"
+    }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $opt_debug
+  func_convert_core_file_wine_to_w32_result="$1"
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$lt_sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $opt_debug
+  # unfortunately, winepath doesn't convert paths, only file names
+  func_convert_core_path_wine_to_w32_result=""
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $opt_debug
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $opt_debug
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $opt_debug
+  if test -z "$2" && test -n "$1" ; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  \`$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result="$1"
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $opt_debug
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  \`$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result="$3"
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $opt_debug
+  case $4 in
+  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $opt_debug
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $opt_debug
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $opt_debug
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd="func_convert_path_${func_stripname_result}"
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $opt_debug
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $opt_debug
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+    pie_flag=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
+	;;
+
+      target )
+	libobj="$arg"
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify \`-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-pie | -fpie | -fPIE)
+          func_append pie_flag " $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  func_append later " $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
+	  lastarg=
+	  save_ifs="$IFS"; IFS=','
+	  for arg in $args; do
+	    IFS="$save_ifs"
+	    func_append_quoted lastarg "$arg"
+	  done
+	  IFS="$save_ifs"
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
+
+	  # Add the arguments to base_compile.
+	  func_append base_compile " $lastarg"
+	  continue
+	  ;;
+
+	*)
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg="$srcfile"
+	  srcfile="$arg"
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      func_append_quoted base_compile "$lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      func_fatal_error "you must specify an argument for -Xcompile"
+      ;;
+    target)
+      func_fatal_error "you must specify a target with \`-o'"
+      ;;
+    *)
+      # Get the name of the library object.
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj="$func_basename_result"
+      }
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    case $libobj in
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
+    esac
+
+    case $libobj in
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+    *)
+      func_fatal_error "cannot determine name of library object from \`$libobj'"
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
+      -static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname="$func_basename_result"
+    xdir="$func_dirname_result"
+    lobj=${xdir}$objdir/$objname
+
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	$ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+      func_append removelist " $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
+    fi
+
+    $opt_dry_run || $RM $removelist
+    func_append removelist " $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      func_mkdir_p "$xdir$objdir"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	func_append command " -o $lobj"
+      fi
+
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+	suppress_output=' >/dev/null 2>&1'
+      fi
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile$pie_flag"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test "$compiler_c_o" = yes; then
+	func_append command " -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      func_append command "$suppress_output"
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test "$need_locks" != no; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $opt_mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode \`$opt_mode'"
+        ;;
+    esac
+
+    echo
+    $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test "$opt_help" = :; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    sed '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $opt_debug
+    # The first argument is the command name.
+    cmd="$nonopt"
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $opt_dlopen; do
+      test -f "$file" \
+	|| func_fatal_help "\`$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  func_append dir "/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+	;;
+
+      *)
+	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -* | *.la | *.lo ) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_append_quoted args "$file"
+    done
+
+    if test "X$opt_dry_run" = Xfalse; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $opt_debug
+    libs=
+    libdirs=
+    admincmds=
+
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
+
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "\`$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument \`$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    $opt_silent && exit $EXIT_SUCCESS
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
+
+	$ECHO "   - use the \`$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      fi
+      echo
+
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
+    exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $opt_debug
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       case $nonopt in *shtool*) :;; *) false;; esac; then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    func_append install_prog "$func_quote_for_eval_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    no_mode=:
+    for arg
+    do
+      arg2=
+      if test -n "$dest"; then
+	func_append files " $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f)
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      func_append install_prog " $func_quote_for_eval_result"
+      if test -n "$arg2"; then
+	func_quote_for_eval "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prev' option requires an argument"
+
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_for_eval_result"
+      fi
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir="$func_dirname_result"
+      destname="$func_basename_result"
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "\`$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	func_append staticlibs " $file"
+	;;
+
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append current_libdirs " $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append future_libdirs " $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir="$func_dirname_result"
+	func_append dir "$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking \`$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname="$1"
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme="$stripme"
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=""
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name="$func_basename_result"
+	instname="$dir/$name"i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "\`$lib' has not been installed in \`$libdir'"
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if test "$finalize" = yes; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file="$func_basename_result"
+	        outputname="$tmpdir/$file"
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_silent || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink \`$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file="$outputname"
+	      else
+	        func_warning "cannot relink \`$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name="$func_basename_result"
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $opt_debug
+    my_outputname="$1"
+    my_originator="$2"
+    my_pic_p="${3-no}"
+    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms="${my_outputname}S.c"
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist="$output_objdir/${my_outputname}.nm"
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols="$output_objdir/$outputname.exp"
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin* | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_basename "$dlprefile"
+	  name="$func_basename_result"
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=""
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname" ; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename="$func_basename_result"
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename" ; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+  { \"$my_originator\", (void *) 0 },"
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  echo >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
+	    fi
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) func_append symtab_cflags " $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+  $opt_debug
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      func_to_tool_file "$1" func_convert_file_msys_to_w32
+      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	$SED -n -e '
+	    1,100{
+		/ I /{
+		    s,.*,import,
+		    p
+		    q
+		}
+	    }'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $opt_debug
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $opt_debug
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive which possess that section. Heuristic: eliminate
+    # all those which have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $opt_debug
+  if func_cygming_gnu_implib_p "$1" ; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1" ; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=""
+  fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    if test "$lock_old_archive_extraction" = yes; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test "$lock_old_archive_extraction" = yes; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $opt_debug
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib="$func_basename_result"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`basename "$darwin_archive"`
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+    done
+
+    func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=${1-no}
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+  done
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+      func_exec_program \${1+\"\$@\"}
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+*/
+EOF
+	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+#  define _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+	    cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_path "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_path "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  intptr_t rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  newargz = XMALLOC (char *, argc + 1);
+
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strcmp (argv[i], dumpscript_opt) == 0)
+	{
+EOF
+	    case "$host" in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  lt_dump_script (stdout);
+	  return 0;
+	}
+      if (strcmp (argv[i], debug_opt) == 0)
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
+  for (i = 0; i < newargc; i++)
+    {
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char *concat_name;
+
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = q - p;
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (strcmp (str, pat) == 0)
+	*str = '\0';
+    }
+  return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $opt_debug
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $opt_debug
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args=$nonopt
+    base_compile="$nonopt $@"
+    compile_command=$nonopt
+    finalize_command=$nonopt
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+    new_inherited_linker_flags=
+
+    avoid_version=no
+    bindir=
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    weak_libs=
+    single_module="${wl}-single_module"
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    func_warning "complete static linking is impossible in this configuration"
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg="$1"
+      shift
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	bindir)
+	  bindir="$arg"
+	  prev=
+	  continue
+	  ;;
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      func_append dlfiles " $arg"
+	    else
+	      func_append dlprefiles " $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file \`$arg' does not exist"
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      func_append moreargs " $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		func_source "$arg"
+
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none &&
+		   test "$non_pic_object" = none; then
+		  func_fatal_error "cannot find name of object for \`$arg'"
+		fi
+
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir="$func_dirname_result"
+
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
+
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      func_append dlfiles " $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    func_append dlprefiles " $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg="$pic_object"
+		fi
+
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
+
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir="$func_dirname_result"
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "\`$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file \`$arg' does not exist"
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    func_fatal_error "only absolute run-paths are allowed"
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) func_append rpath " $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) func_append xrpath " $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	shrext)
+	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  func_append weak_libs " $arg"
+	  prev=
+	  continue
+	  ;;
+	xcclinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xcompiler)
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
+	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework)
+	prev=framework
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
+	  else
+	    func_fatal_error "need path for \`-L' option"
+	  fi
+	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
+	  dir="$absdir"
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
+	*)
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
+	  *) func_append dllsearchpath ":$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    func_append deplibs " System.ltframework"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  esac
+	elif test "X$arg" = "X-lc_r"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	func_append deplibs " $arg"
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	prev=xcompiler
+	continue
+	;;
+
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
+	esac
+	continue
+	;;
+
+      -multi_module)
+	single_module="${wl}-multi_module"
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "\`-no-install' is ignored for $host"
+	  func_warning "assuming \`-no-fast-install' instead"
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
+	*)
+	  func_fatal_error "only absolute run-paths are allowed"
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) func_append xrpath " $dir" ;;
+	esac
+	continue
+	;;
+
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -weak)
+        prev=weak
+	continue
+	;;
+
+      -Wc,*)
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  func_append arg " $func_quote_for_eval_result"
+	  func_append compiler_flags " $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Wl,*)
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  func_append arg " $wl$func_quote_for_eval_result"
+	  func_append compiler_flags " $wl$func_quote_for_eval_result"
+	  func_append linker_flags " $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        func_append compiler_flags " $arg"
+        continue
+        ;;
+
+      # Some other compiler flag.
+      -* | +*)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      *.$objext)
+	# A standard object.
+	func_append objs " $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if func_lalib_unsafe_p "$arg"; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  func_source "$arg"
+
+	  if test -z "$pic_object" ||
+	     test -z "$non_pic_object" ||
+	     test "$pic_object" = none &&
+	     test "$non_pic_object" = none; then
+	    func_fatal_error "cannot find name of object for \`$arg'"
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  func_dirname "$arg" "/" ""
+	  xdir="$func_dirname_result"
+
+	  if test "$pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
+
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		func_append dlfiles " $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      func_append dlprefiles " $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    func_append libobjs " $pic_object"
+	    arg="$pic_object"
+	  fi
+
+	  # Non-PIC object.
+	  if test "$non_pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
+
+	    # A standard non-PIC object
+	    func_append non_pic_objects " $non_pic_object"
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if $opt_dry_run; then
+	    # Extract subdirectory from the argument.
+	    func_dirname "$arg" "/" ""
+	    xdir="$func_dirname_result"
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "\`$arg' is not a valid libtool object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	func_resolve_sysroot "$arg"
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  func_append dlfiles " $func_resolve_sysroot_result"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  func_append dlprefiles " $func_resolve_sysroot_result"
+	  prev=
+	else
+	  func_append deplibs " $func_resolve_sysroot_result"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+      fi
+    done # argument parsing loop
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prevarg' option requires an argument"
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    func_basename "$output"
+    outputname="$func_basename_result"
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    func_dirname "$output" "/" ""
+    output_objdir="$func_dirname_result$objdir"
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
+    # Create the object directory.
+    func_mkdir_p "$output_objdir"
+
+    # Determine the type of output
+    case $output in
+    "")
+      func_fatal_help "you must specify an output file"
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if $opt_preserve_dup_deps ; then
+	case "$libs " in
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	esac
+      fi
+      func_append libs " $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if $opt_duplicate_compiler_generated_deps; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+	  esac
+	  func_append pre_post_deps " $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
+    case $linkmode in
+    lib)
+	passes="conv dlpreopen link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+
+    for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test "$linkmode,$pass" = "lib,link"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs="$tmp_deplibs"
+      fi
+
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test "$linkmode" = prog; then
+	case $pass in
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  func_resolve_sysroot "$lib"
+	  case $lib in
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) func_append deplibs " $deplib" ;;
+	    esac
+	  done
+	done
+	libs="$dlprefiles"
+      fi
+      if test "$pass" = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
+
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    func_append compiler_flags " $deplib"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    func_warning "\`-l' is ignored for archives/objects"
+	    continue
+	  fi
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  else # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if func_lalib_p "$lib"; then
+		  library_names=
+		  old_library=
+		  func_source "$lib"
+		  for l in $old_library $library_names; do
+		    ll="$l"
+		  done
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
+		    func_dirname "$lib" "" "."
+		    ladir="$func_dirname_result"
+		    lib=$ladir/$old_library
+		    if test "$linkmode,$pass" = "prog,link"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+		;;
+	      *) ;;
+	      esac
+	    fi
+	  fi
+	  ;; # -l
+	*.ltframework)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test "$pass" = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  prog)
+	    if test "$pass" = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test "$pass" = scan; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  *)
+	    func_warning "\`-L' is ignored for archives/objects"
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test "$pass" = link; then
+	    func_stripname '-R' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) func_append xrpath " $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
+	*.$libext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=no
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=yes
+		  fi
+		;;
+		pass_all)
+		  valid_a_lib=yes
+		;;
+	      esac
+	      if test "$valid_a_lib" != yes; then
+		echo
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
+	      else
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      fi
+	      ;;
+	    esac
+	    continue
+	    ;;
+	  prog)
+	    if test "$pass" != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      func_append newdlprefiles " $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      func_append newdlfiles " $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+
+	if test "$found" = yes || test -f "$lib"; then :
+	else
+	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+	fi
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+	func_dirname "$lib" "" "."
+	ladir="$func_dirname_result"
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	inherited_linker_flags=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+	fi
+
+	if test "$pass" = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      func_fatal_error "cannot find name of link library for \`$lib'"
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+	    func_fatal_error "\`$lib' is not a convenience library"
+	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	if test -n "$old_library" &&
+	   { test "$prefer_static_libs" = yes ||
+	     test "$prefer_static_libs,$installed" = "built,no"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib="$l"
+	  done
+	fi
+	if test -z "$linklib"; then
+	  func_fatal_error "cannot find name of link library for \`$lib'"
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$pass" = dlopen; then
+	  if test -z "$libdir"; then
+	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+	  fi
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    func_append dlprefiles " $lib $dependency_libs"
+	  else
+	    func_append newdlfiles " $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	func_basename "$lib"
+	laname="$func_basename_result"
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    func_warning "library \`$lib' was moved."
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$lt_sysroot$libdir"
+	    absdir="$lt_sysroot$libdir"
+	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  fi
+	fi # $installed = yes
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
+
+	# This library was specified with -dlpreopen.
+	if test "$pass" = dlpreopen; then
+	  if test -z "$libdir" && test "$linkmode" = prog; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+	  fi
+	  case "$host" in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test "$linkmode" = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test "$linkmode" = prog && test "$pass" != link; then
+	  func_append newlib_search_path " $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) func_stripname '-L' '' "$deplib"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
+		 ;;
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test "$linkalldeplibs" = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { { test "$prefer_static_libs" = no ||
+	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath:" in
+	      *"$absdir:"*) ;;
+	      *) func_append temp_rpath "$absdir:" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc*)
+	      # No point in relinking DLLs because paths are not encoded
+	      func_append notinst_deplibs " $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test "$installed" = no; then
+	      func_append notinst_deplibs " $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=""
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule="$dlpremoduletest"
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	    echo
+	    if test "$linkmode" = prog; then
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $ECHO "*** $linklib is not portable!"
+	  fi
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    shift
+	    realname="$1"
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw* | *cegcc*)
+	        func_arith $current - $age
+		major=$func_arith_result
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    func_basename "$soroot"
+	    soname="$func_basename_result"
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      func_verbose "generating import library for \`$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
+		  *-*-darwin* )
+		    # if the lib is a (non-dlopened) module then we can not
+		    # link against it, someone is ignoring the earlier warnings
+		    if /usr/bin/file -L $add 2> /dev/null |
+			 $GREP ": [^:]* bundle" >/dev/null ; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library" ; then
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
+			else
+			  add="$dir/$old_library"
+			fi
+		      elif test -n "$old_library"; then
+			add="$dir/$old_library"
+		      fi
+		    fi
+		esac
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes &&
+	         test "$hardcode_direct_absolute" = no; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$absdir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      func_fatal_configuration "unsupported hardcode properties"
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes &&
+		 test "$hardcode_minus_L" != yes &&
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes &&
+	       test "$hardcode_direct_absolute" = no; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+		add="$inst_prefix_dir$libdir/$linklib"
+	      else
+		add="$libdir/$linklib"
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add="-l$name"
+	    fi
+
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test "$linkmode" = prog; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test "$linkmode" = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) func_append xrpath " $temp_xrpath";;
+		   esac;;
+	      *) func_append temp_deplibs " $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  func_append newlib_search_path " $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $func_resolve_sysroot_result"
+	  done
+
+	  if test "$link_all_deplibs" != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      path=
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
+	        func_dirname "$deplib" "" "."
+		dir=$func_dirname_result
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    func_warning "cannot determine absolute directory name of \`$dir'"
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if $GREP "^installed=no" $deplib > /dev/null; then
+		case $host in
+		*-*-darwin*)
+		  depdepl=
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$absdir/$objdir/$depdepl" ; then
+		      depdepl="$absdir/$objdir/$depdepl"
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+		      path=
+		    fi
+		  fi
+		  ;;
+		*)
+		  path="-L$absdir/$objdir"
+		  ;;
+		esac
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "\`$deplib' seems to be moved"
+
+		  path="-L$absdir"
+		fi
+		;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test "$pass" = link; then
+	if test "$linkmode" = "prog"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) func_append lib_search_path " $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) func_append tmp_libs " $deplib" ;;
+	      esac
+	      ;;
+	    *) func_append tmp_libs " $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=""
+	  ;;
+	esac
+	if test -n "$i" ; then
+	  func_append tmp_libs " $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+    fi
+    if test "$linkmode" = prog || test "$linkmode" = lib; then
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for archives"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for archives"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for archives"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info/-version-number' is ignored for archives"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "\`-export-symbols' is ignored for archives"
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      func_append objs "$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	test "$module" = no && \
+	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+	else
+	  echo
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
+	  func_append libobjs " $objs"
+	fi
+      fi
+
+      test "$dlself" != no && \
+	func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+      set dummy $rpath
+      shift
+      test "$#" -gt 1 && \
+	func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+      install_libdir="$1"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a `.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	test -n "$vinfo" && \
+	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+	test -n "$release" && \
+	  func_warning "\`-release' is ignored for convenience libraries"
+      else
+
+	# Parse the version information argument.
+	save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	shift
+	IFS="$save_ifs"
+
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to \`-version-info'"
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major="$1"
+	  number_minor="$2"
+	  number_revision="$3"
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # which has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
+	  darwin|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_revision"
+	    ;;
+	  freebsd-aout|freebsd-elf|qnx|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
+	    ;;
+	  irix|nonstopux)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_minor"
+	    lt_irix_increment=no
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current="$1"
+	  revision="$2"
+	  age="$3"
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "CURRENT \`$current' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "REVISION \`$revision' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "AGE \`$age' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	irix | nonstopux)
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test "$loop" -ne 0; do
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring_prefix$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux) # correct to gnu/linux during the next big refactor
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test "$loop" -ne 0; do
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  func_append verstring ":${current}.0"
+	  ;;
+
+	qnx)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  func_arith $current - $age
+	  major=$func_arith_result
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  func_fatal_configuration "unknown library version type \`$version_type'"
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring="0.0"
+	    ;;
+	  esac
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    func_warning "undefined symbols not allowed in $host shared libraries"
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+
+      fi
+
+      func_generate_dlsyms "$libname" "$libname" "yes"
+      func_append libobjs " $symfileobj"
+      test "X$libobjs" = "X " && libobjs=
+
+      if test "$opt_mode" != relink; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$ECHO "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext | *.gcno)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
+		   continue
+		 fi
+	       fi
+	       func_append removelist " $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	func_append oldlibs " $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) func_append dlfiles " $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) func_append dlprefiles " $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    func_append deplibs " System.ltframework"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test "$build_libtool_need_lc" = "yes"; then
+	      func_append deplibs " -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $opt_dry_run || $RM conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    func_append newdeplibs " $i"
+		    i=""
+		    ;;
+		  esac
+		fi
+		if test -n "$i" ; then
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    func_append newdeplibs " $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      func_append newdeplibs " $i"
+		      i=""
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i" ; then
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		      func_append newdeplibs " $i"
+		    else
+		      droppeddeps=yes
+		      echo
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  if test "$want_nocaseglob" = yes; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
+			func_append newdeplibs " $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
+		      func_append newdeplibs " $a_deplib"
+		      a_deplib=""
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+	    done
+	  fi
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	    ;;
+	  esac
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  ;;
+	esac
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test "$allow_undefined" = no; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	# Remove ${wl} instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
+	if test "$hardcode_into_libs" = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		func_append dep_rpath " $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append perm_rpath " $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      func_append rpath "$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	shift
+	realname="$1"
+	shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib="$output_objdir/$realname"
+	linknames=
+	for link
+	do
+	  func_append linknames " $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols="$output_objdir/$libname.uexp"
+	  func_append delfiles " $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols="$export_symbols"
+	      export_symbols=
+	      always_export_symbols=yes
+	    fi
+	  fi
+	  ;;
+	esac
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $opt_dry_run || $RM $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd1 in $cmds; do
+	      IFS="$save_ifs"
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test "$try_normal_branch" = yes \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=${output_objdir}/${output_la}.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
+	      else
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  tmp_export_symbols="$export_symbols"
+	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    func_append tmp_deplibs " $test_deplib"
+	    ;;
+	  esac
+	done
+	deplibs="$tmp_deplibs"
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test "$compiler_needs_object" = yes &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    func_append generated " $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    func_append libobjs " $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	fi
+
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  func_append linker_flags " $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$opt_mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
+	  fi
+	fi
+
+	if test "X$skipped_export" != "X:" &&
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  func_basename "$output"
+	  output_la=$func_basename_result
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  last_robj=
+	  k=1
+
+	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+	    output=${output_objdir}/${output_la}.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    echo 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
+	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+	    output=${output_objdir}/${output_la}.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test "$compiler_needs_object" = yes; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-${k}.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test "X$objlist" = X ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test "$k" -eq 1 ; then
+		    # The first file doesn't have a previous command to add.
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-${k}.$objext
+		  objlist=" $obj"
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	      fi
+	      func_append delfiles " $output"
+
+	    else
+	      output=
+	    fi
+
+	    if ${skipped_export-false}; then
+	      func_verbose "generating symbol list for \`$libname.la'"
+	      export_symbols="$output_objdir/$libname.exp"
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	    fi
+
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS="$save_ifs"
+	      $opt_silent || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test "$opt_mode" = relink; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
+	    IFS="$save_ifs"
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          if ${skipped_export-false}; then
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols="$export_symbols"
+	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  fi
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
+	    fi
+	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append libobjs " $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
+	fi
+
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $opt_silent || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$opt_mode" = relink; then
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS="$save_ifs"
+
+	# Restore the uninstalled library and exit
+	if test "$opt_mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      func_show_eval '${RM}r "$gentop"'
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for objects"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for objects"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for objects"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for objects"
+
+      case $output in
+      *.lo)
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $opt_dry_run || $RM $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
+      wl=
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	else
+	  gentop="$output_objdir/${obj}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # If we're not building shared, we need to use non_pic_objs
+      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      func_execute_cmds "$reload_cmds" 'exit $?'
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	func_execute_cmds "$reload_cmds" 'exit $?'
+      fi
+
+      if test -n "$gentop"; then
+	func_show_eval '${RM}r "$gentop"'
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
+      esac
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for programs"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for programs"
+
+      test "$preload" = yes \
+        && test "$dlopen_support" = unknown \
+	&& test "$dlopen_self" = unknown \
+	&& test "$dlopen_self_static" = unknown && \
+	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	;;
+      esac
+
+      case $host in
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test "$tagname" = CXX ; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      func_append compile_command " ${wl}-bind_at_load"
+	      func_append finalize_command " ${wl}-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append perm_rpath " $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
+	  *) func_append dllsearchpath ":$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+      fi
+
+      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
+      fi
+
+      wrappers_required=yes
+      case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
+      *cygwin* | *mingw* )
+        if test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      *)
+        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      esac
+      if test "$wrappers_required" = no; then
+	# Replace the output file specification.
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.${objext}"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+	fi
+
+	exit $exit_status
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$opt_dry_run || $RM $output
+	# Link the executable and exit
+	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	func_warning "this platform does not like uninstalled shared libraries"
+	func_warning "\`$output' will be relinked during installation"
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      func_show_eval "$link_command" 'exit $?'
+
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
+      # Now create the wrapper script.
+      func_verbose "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
+	    cwrapper="$output_path/$output_name.exe"
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
+
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host" ; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
+	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_wrapper no > $output
+	    chmod +x $output
+	  ;;
+	esac
+      }
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save $symfileobj"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$old_deplibs $non_pic_objects"
+	  if test "$preload" = yes && test -f "$symfileobj"; then
+	    func_append oldobjs " $symfileobj"
+	  fi
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	func_append generated " $gentop"
+
+	func_extract_archives $gentop $addlibs
+	func_append oldobjs " $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	cmds=$old_archive_from_new_cmds
+      else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append oldobjs " $func_extract_archives_result"
+	fi
+
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  echo "copying selected object files to avoid basename conflicts..."
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+	  func_mkdir_p "$gentop"
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    func_basename "$obj"
+	    objbase="$func_basename_result"
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		func_arith $counter + 1
+		counter=$func_arith_result
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
+	      ;;
+	    *) func_append oldobjs " $obj" ;;
+	    esac
+	  done
+	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
+	eval cmds=\"$old_archive_cmds\"
+
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  func_verbose "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
+	  for obj in $save_oldobjs
+	  do
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj" ; then
+		RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      objlist=
+	      len=$len0
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test "X$oldobjs" = "X" ; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      func_execute_cmds "$cmds" 'exit $?'
+    done
+
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      func_verbose "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
+      fi
+
+      # Only create the output if not a dry run.
+      $opt_dry_run || {
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		func_basename "$deplib"
+		name="$func_basename_result"
+		func_resolve_sysroot "$deplib"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$deplib' is not a valid libtool archive"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+
+	    for lib in $dlfiles; do
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      *) func_append newdlfiles " $lib" ;;
+	      esac
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      esac
+	    done
+	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlfiles " $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlprefiles " $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $RM $output
+	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test "x$bindir" != x ;
+	      then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
+	  esac
+	  $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test "$installed" = no && test "$need_relink" = yes; then
+	    $ECHO >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      }
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+    func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $opt_debug
+    RM="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) func_append RM " $arg"; rmforce=yes ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
+      esac
+    done
+
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
+
+    rmdirs=
+
+    for file in $files; do
+      func_dirname "$file" "" "."
+      dir="$func_dirname_result"
+      if test "X$dir" = X.; then
+	odir="$objdir"
+      else
+	odir="$dir/$objdir"
+      fi
+      func_basename "$file"
+      name="$func_basename_result"
+      test "$opt_mode" = uninstall && odir="$dir"
+
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test "$opt_mode" = clean; then
+	case " $rmdirs " in
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+	continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    func_append rmfiles " $odir/$n"
+	  done
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+	  case "$opt_mode" in
+	  clean)
+	    case " $library_names " in
+	    *" $dlname "*) ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+	    esac
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if func_lalib_p "$file"; then
+
+	  # Read the .lo file
+	  func_source $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" &&
+	     test "$pic_object" != none; then
+	    func_append rmfiles " $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" &&
+	     test "$non_pic_object" != none; then
+	    func_append rmfiles " $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test "$opt_mode" = clean ; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    func_append rmfiles " $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	      func_append rmfiles " $odir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name" ; then
+	      func_append rmfiles " $odir/lt-${noexename}.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
+    done
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
+      fi
+    done
+
+    exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+    func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+  help="$generic_help"
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+  eval exec "$exec_cmd"
+  exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
diff --git a/jpeg-8d/makcjpeg.st b/jpeg-8d/makcjpeg.st
new file mode 100644
index 0000000..628f533
--- /dev/null
+++ b/jpeg-8d/makcjpeg.st
@@ -0,0 +1,36 @@
+; Project file for Independent JPEG Group's software
+;
+; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
+; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding.
+;
+; To use this file, rename it to cjpeg.prj.
+; If you are using Turbo C, change filenames beginning with "pc..." to "tc..."
+; Read installation instructions before trying to make the program!
+;
+;
+;      * * * Output file * * *
+cjpeg.ttp
+;
+; * * * COMPILER OPTIONS * * *  
+.C[-P]        ; absolute calls
+.C[-M]        ; and no string merging, folks
+.C[-w-cln]    ; no "constant is long" warnings
+.C[-w-par]    ; no "parameter xxxx unused"
+.C[-w-rch]    ; no "unreachable code"
+.C[-wsig]     ; warn if significant digits may be lost
+=
+; * * * * List of modules * * * * 
+pcstart.o
+cjpeg.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h)
+cdjpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+rdswitch.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+rdppm.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+rdgif.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+rdtarga.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+rdbmp.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+rdrle.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+libjpeg.lib        ; built by libjpeg.prj
+pcfltlib.lib       ; floating point library
+; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED
+pcstdlib.lib       ; standard library
+pcextlib.lib       ; extended library
diff --git a/jpeg-8d/makdjpeg.st b/jpeg-8d/makdjpeg.st
new file mode 100644
index 0000000..4b61404
--- /dev/null
+++ b/jpeg-8d/makdjpeg.st
@@ -0,0 +1,36 @@
+; Project file for Independent JPEG Group's software
+;
+; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
+; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding.
+;
+; To use this file, rename it to djpeg.prj.
+; If you are using Turbo C, change filenames beginning with "pc..." to "tc..."
+; Read installation instructions before trying to make the program!
+;
+;
+;      * * * Output file * * *
+djpeg.ttp
+;
+; * * * COMPILER OPTIONS * * *  
+.C[-P]        ; absolute calls
+.C[-M]        ; and no string merging, folks
+.C[-w-cln]    ; no "constant is long" warnings
+.C[-w-par]    ; no "parameter xxxx unused"
+.C[-w-rch]    ; no "unreachable code"
+.C[-wsig]     ; warn if significant digits may be lost
+=
+; * * * * List of modules * * * * 
+pcstart.o
+djpeg.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h)
+cdjpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+rdcolmap.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+wrppm.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+wrgif.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+wrtarga.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+wrbmp.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+wrrle.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+libjpeg.lib        ; built by libjpeg.prj
+pcfltlib.lib       ; floating point library
+; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED
+pcstdlib.lib       ; standard library
+pcextlib.lib       ; extended library
diff --git a/jpeg-8d/makeadsw.vc6 b/jpeg-8d/makeadsw.vc6
new file mode 100644
index 0000000..80459c5
--- /dev/null
+++ b/jpeg-8d/makeadsw.vc6
@@ -0,0 +1,77 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GEL™SCHT WERDEN!
+
+###############################################################################
+
+Project: "cjpeg"=".\cjpeg.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "djpeg"=".\djpeg.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "jpegtran"=".\jpegtran.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "rdjpgcom"=".\rdjpgcom.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "wrjpgcom"=".\wrjpgcom.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+
diff --git a/jpeg-8d/makeasln.v10 b/jpeg-8d/makeasln.v10
new file mode 100644
index 0000000..617d9e9
--- /dev/null
+++ b/jpeg-8d/makeasln.v10
@@ -0,0 +1,33 @@
+‹¯¨
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Visual C++ Express 2010
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "cjpeg", "cjpeg.vcxproj", "{2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "djpeg", "djpeg.vcxproj", "{11043137-B453-4DFA-9010-4D2B9DC1545C}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpegtran", "jpegtran.vcxproj", "{025BAC50-51B5-4FFE-BC47-3F920BB4047E}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "rdjpgcom", "rdjpgcom.vcxproj", "{C81513DB-78DC-46BC-BC98-82E745203976}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wrjpgcom", "wrjpgcom.vcxproj", "{B57065D4-DDDA-4668-BAF5-2D49270C973C}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Release|Win32 = Release|Win32
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|Win32.ActiveCfg = Release|Win32
+		{2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|Win32.Build.0 = Release|Win32
+		{11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|Win32.ActiveCfg = Release|Win32
+		{11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|Win32.Build.0 = Release|Win32
+		{025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|Win32.ActiveCfg = Release|Win32
+		{025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|Win32.Build.0 = Release|Win32
+		{C81513DB-78DC-46BC-BC98-82E745203976}.Release|Win32.ActiveCfg = Release|Win32
+		{C81513DB-78DC-46BC-BC98-82E745203976}.Release|Win32.Build.0 = Release|Win32
+		{B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|Win32.ActiveCfg = Release|Win32
+		{B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|Win32.Build.0 = Release|Win32
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal
diff --git a/jpeg-8d/makecdep.vc6 b/jpeg-8d/makecdep.vc6
new file mode 100644
index 0000000..11dff77
--- /dev/null
+++ b/jpeg-8d/makecdep.vc6
@@ -0,0 +1,82 @@
+# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von cjpeg.mak
+
+.\cdjpeg.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\cjpeg.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	".\jversion.h"\
+	
+
+.\rdbmp.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\rdgif.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\rdppm.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\rdrle.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\rdswitch.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\rdtarga.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
diff --git a/jpeg-8d/makecdsp.vc6 b/jpeg-8d/makecdsp.vc6
new file mode 100644
index 0000000..3ab5965
--- /dev/null
+++ b/jpeg-8d/makecdsp.vc6
@@ -0,0 +1,130 @@
+# Microsoft Developer Studio Project File - Name="cjpeg" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** NICHT BEARBEITEN **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=cjpeg - Win32
+!MESSAGE Dies ist kein g�ltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE
+!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und f�hren Sie den Befehl
+!MESSAGE 
+!MESSAGE NMAKE /f "cjpeg.mak".
+!MESSAGE 
+!MESSAGE Sie k÷nnen beim Ausf�hren von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "cjpeg.mak" CFG="cjpeg - Win32"
+!MESSAGE 
+!MESSAGE F�r die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "cjpeg - Win32" (basierend auf  "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir ".\cjpeg\Release"
+# PROP BASE Intermediate_Dir ".\cjpeg\Release"
+# PROP BASE Target_Dir ".\cjpeg"
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir ".\cjpeg\Release"
+# PROP Intermediate_Dir ".\cjpeg\Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ".\cjpeg"
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
+# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# Begin Target
+
+# Name "cjpeg - Win32"
+# Begin Group "Quellcodedateien"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90"
+# Begin Source File
+
+SOURCE=.\cdjpeg.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\cjpeg.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\rdbmp.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\rdgif.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\rdppm.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\rdrle.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\rdswitch.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\rdtarga.c
+# End Source File
+# End Group
+# Begin Group "Header-Dateien"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
+# Begin Source File
+
+SOURCE=.\cderror.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\cdjpeg.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jconfig.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jerror.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jinclude.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jmorecfg.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jpeglib.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jversion.h
+# End Source File
+# End Group
+# Begin Group "Ressourcendateien"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project
diff --git a/jpeg-8d/makecfil.v10 b/jpeg-8d/makecfil.v10
new file mode 100644
index 0000000..a4f81ac
--- /dev/null
+++ b/jpeg-8d/makecfil.v10
@@ -0,0 +1,69 @@
+‹¯¨<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="cderror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="cdjpeg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jconfig.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jerror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jinclude.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jmorecfg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jpeglib.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jversion.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="cdjpeg.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="cjpeg.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdbmp.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdgif.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdppm.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdrle.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdswitch.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdtarga.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>
\ No newline at end of file
diff --git a/jpeg-8d/makecmak.vc6 b/jpeg-8d/makecmak.vc6
new file mode 100644
index 0000000..bee03bf
--- /dev/null
+++ b/jpeg-8d/makecmak.vc6
@@ -0,0 +1,159 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on cjpeg.dsp
+!IF "$(CFG)" == ""
+CFG=cjpeg - Win32
+!MESSAGE Keine Konfiguration angegeben. cjpeg - Win32 wird als Standard verwendet.
+!ENDIF 
+
+!IF "$(CFG)" != "cjpeg - Win32"
+!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben.
+!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "cjpeg.mak" CFG="cjpeg - Win32"
+!MESSAGE 
+!MESSAGE Für die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "cjpeg - Win32" (basierend auf  "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR Eine ungültige Konfiguration wurde angegeben.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+CPP=cl.exe
+RSC=rc.exe
+OUTDIR=.\cjpeg\Release
+INTDIR=.\cjpeg\Release
+# Begin Custom Macros
+OutDir=.\cjpeg\Release
+# End Custom Macros
+
+ALL : "$(OUTDIR)\cjpeg.exe"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\cdjpeg.obj"
+	-@erase "$(INTDIR)\cjpeg.obj"
+	-@erase "$(INTDIR)\rdbmp.obj"
+	-@erase "$(INTDIR)\rdgif.obj"
+	-@erase "$(INTDIR)\rdppm.obj"
+	-@erase "$(INTDIR)\rdrle.obj"
+	-@erase "$(INTDIR)\rdswitch.obj"
+	-@erase "$(INTDIR)\rdtarga.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(OUTDIR)\cjpeg.exe"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\cjpeg.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\cjpeg.pdb" /machine:I386 /out:"$(OUTDIR)\cjpeg.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\cdjpeg.obj" \
+	"$(INTDIR)\cjpeg.obj" \
+	"$(INTDIR)\rdbmp.obj" \
+	"$(INTDIR)\rdgif.obj" \
+	"$(INTDIR)\rdppm.obj" \
+	"$(INTDIR)\rdrle.obj" \
+	"$(INTDIR)\rdswitch.obj" \
+	"$(INTDIR)\rdtarga.obj"
+
+"$(OUTDIR)\cjpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+
+CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\cjpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("cjpeg.dep")
+!INCLUDE "cjpeg.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "cjpeg.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "cjpeg - Win32"
+SOURCE=.\cdjpeg.c
+
+"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\cjpeg.c
+
+"$(INTDIR)\cjpeg.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\rdbmp.c
+
+"$(INTDIR)\rdbmp.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\rdgif.c
+
+"$(INTDIR)\rdgif.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\rdppm.c
+
+"$(INTDIR)\rdppm.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\rdrle.c
+
+"$(INTDIR)\rdrle.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\rdswitch.c
+
+"$(INTDIR)\rdswitch.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\rdtarga.c
+
+"$(INTDIR)\rdtarga.obj" : $(SOURCE) "$(INTDIR)"
+
+
+
+!ENDIF 
+
diff --git a/jpeg-8d/makecvcx.v10 b/jpeg-8d/makecvcx.v10
new file mode 100644
index 0000000..5df5c68
--- /dev/null
+++ b/jpeg-8d/makecvcx.v10
@@ -0,0 +1,76 @@
+‹¯¨<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>cjpeg</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>$(ProjectName)\$(Configuration)\</OutDir>
+    <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>NotUsing</PrecompiledHeader>
+      <Optimization>Full</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS</PreprocessorDefinitions>
+      <OmitFramePointers>true</OmitFramePointers>
+      <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
+      <DisableSpecificWarnings>4996</DisableSpecificWarnings>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <AdditionalDependencies>Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="cderror.h" />
+    <ClInclude Include="cdjpeg.h" />
+    <ClInclude Include="jconfig.h" />
+    <ClInclude Include="jerror.h" />
+    <ClInclude Include="jinclude.h" />
+    <ClInclude Include="jmorecfg.h" />
+    <ClInclude Include="jpeglib.h" />
+    <ClInclude Include="jversion.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="cdjpeg.c" />
+    <ClCompile Include="cjpeg.c" />
+    <ClCompile Include="rdbmp.c" />
+    <ClCompile Include="rdgif.c" />
+    <ClCompile Include="rdppm.c" />
+    <ClCompile Include="rdrle.c" />
+    <ClCompile Include="rdswitch.c" />
+    <ClCompile Include="rdtarga.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>
\ No newline at end of file
diff --git a/jpeg-8d/makeddep.vc6 b/jpeg-8d/makeddep.vc6
new file mode 100644
index 0000000..f911eba
--- /dev/null
+++ b/jpeg-8d/makeddep.vc6
@@ -0,0 +1,82 @@
+# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von djpeg.mak
+
+.\cdjpeg.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\djpeg.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	".\jversion.h"\
+	
+
+.\rdcolmap.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\wrbmp.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\wrgif.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\wrppm.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\wrrle.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\wrtarga.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
diff --git a/jpeg-8d/makeddsp.vc6 b/jpeg-8d/makeddsp.vc6
new file mode 100644
index 0000000..f583a0f
--- /dev/null
+++ b/jpeg-8d/makeddsp.vc6
@@ -0,0 +1,130 @@
+# Microsoft Developer Studio Project File - Name="djpeg" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** NICHT BEARBEITEN **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=djpeg - Win32
+!MESSAGE Dies ist kein g�ltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE
+!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und f�hren Sie den Befehl
+!MESSAGE 
+!MESSAGE NMAKE /f "djpeg.mak".
+!MESSAGE 
+!MESSAGE Sie k÷nnen beim Ausf�hren von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "djpeg.mak" CFG="djpeg - Win32"
+!MESSAGE 
+!MESSAGE F�r die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "djpeg - Win32" (basierend auf  "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir ".\djpeg\Release"
+# PROP BASE Intermediate_Dir ".\djpeg\Release"
+# PROP BASE Target_Dir ".\djpeg"
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir ".\djpeg\Release"
+# PROP Intermediate_Dir ".\djpeg\Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ".\djpeg"
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
+# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# Begin Target
+
+# Name "djpeg - Win32"
+# Begin Group "Quellcodedateien"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90"
+# Begin Source File
+
+SOURCE=.\cdjpeg.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\djpeg.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\rdcolmap.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\wrbmp.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\wrgif.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\wrppm.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\wrrle.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\wrtarga.c
+# End Source File
+# End Group
+# Begin Group "Header-Dateien"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
+# Begin Source File
+
+SOURCE=.\cderror.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\cdjpeg.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jconfig.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jerror.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jinclude.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jmorecfg.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jpeglib.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jversion.h
+# End Source File
+# End Group
+# Begin Group "Ressourcendateien"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project
diff --git a/jpeg-8d/makedfil.v10 b/jpeg-8d/makedfil.v10
new file mode 100644
index 0000000..b4a83ab
--- /dev/null
+++ b/jpeg-8d/makedfil.v10
@@ -0,0 +1,69 @@
+‹¯¨<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="cderror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="cdjpeg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jconfig.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jerror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jinclude.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jmorecfg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jpeglib.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jversion.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="cdjpeg.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="djpeg.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdcolmap.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="wrbmp.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="wrgif.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="wrppm.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="wrrle.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="wrtarga.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>
\ No newline at end of file
diff --git a/jpeg-8d/makedmak.vc6 b/jpeg-8d/makedmak.vc6
new file mode 100644
index 0000000..e16487f
--- /dev/null
+++ b/jpeg-8d/makedmak.vc6
@@ -0,0 +1,159 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on djpeg.dsp
+!IF "$(CFG)" == ""
+CFG=djpeg - Win32
+!MESSAGE Keine Konfiguration angegeben. djpeg - Win32 wird als Standard verwendet.
+!ENDIF 
+
+!IF "$(CFG)" != "djpeg - Win32"
+!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben.
+!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "djpeg.mak" CFG="djpeg - Win32"
+!MESSAGE 
+!MESSAGE Für die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "djpeg - Win32" (basierend auf  "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR Eine ungültige Konfiguration wurde angegeben.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+CPP=cl.exe
+RSC=rc.exe
+OUTDIR=.\djpeg\Release
+INTDIR=.\djpeg\Release
+# Begin Custom Macros
+OutDir=.\djpeg\Release
+# End Custom Macros
+
+ALL : "$(OUTDIR)\djpeg.exe"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\cdjpeg.obj"
+	-@erase "$(INTDIR)\djpeg.obj"
+	-@erase "$(INTDIR)\rdcolmap.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\wrbmp.obj"
+	-@erase "$(INTDIR)\wrgif.obj"
+	-@erase "$(INTDIR)\wrppm.obj"
+	-@erase "$(INTDIR)\wrrle.obj"
+	-@erase "$(INTDIR)\wrtarga.obj"
+	-@erase "$(OUTDIR)\djpeg.exe"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\djpeg.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\djpeg.pdb" /machine:I386 /out:"$(OUTDIR)\djpeg.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\cdjpeg.obj" \
+	"$(INTDIR)\djpeg.obj" \
+	"$(INTDIR)\rdcolmap.obj" \
+	"$(INTDIR)\wrbmp.obj" \
+	"$(INTDIR)\wrgif.obj" \
+	"$(INTDIR)\wrppm.obj" \
+	"$(INTDIR)\wrrle.obj" \
+	"$(INTDIR)\wrtarga.obj"
+
+"$(OUTDIR)\djpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+
+CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\djpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("djpeg.dep")
+!INCLUDE "djpeg.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "djpeg.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "djpeg - Win32"
+SOURCE=.\cdjpeg.c
+
+"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\djpeg.c
+
+"$(INTDIR)\djpeg.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\rdcolmap.c
+
+"$(INTDIR)\rdcolmap.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\wrbmp.c
+
+"$(INTDIR)\wrbmp.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\wrgif.c
+
+"$(INTDIR)\wrgif.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\wrppm.c
+
+"$(INTDIR)\wrppm.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\wrrle.c
+
+"$(INTDIR)\wrrle.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\wrtarga.c
+
+"$(INTDIR)\wrtarga.obj" : $(SOURCE) "$(INTDIR)"
+
+
+
+!ENDIF 
+
diff --git a/jpeg-8d/makedvcx.v10 b/jpeg-8d/makedvcx.v10
new file mode 100644
index 0000000..9ad2d41
--- /dev/null
+++ b/jpeg-8d/makedvcx.v10
@@ -0,0 +1,76 @@
+‹¯¨<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{11043137-B453-4DFA-9010-4D2B9DC1545C}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>djpeg</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>$(ProjectName)\$(Configuration)\</OutDir>
+    <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>NotUsing</PrecompiledHeader>
+      <Optimization>Full</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS</PreprocessorDefinitions>
+      <OmitFramePointers>true</OmitFramePointers>
+      <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
+      <DisableSpecificWarnings>4996</DisableSpecificWarnings>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <AdditionalDependencies>Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="cderror.h" />
+    <ClInclude Include="cdjpeg.h" />
+    <ClInclude Include="jconfig.h" />
+    <ClInclude Include="jerror.h" />
+    <ClInclude Include="jinclude.h" />
+    <ClInclude Include="jmorecfg.h" />
+    <ClInclude Include="jpeglib.h" />
+    <ClInclude Include="jversion.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="cdjpeg.c" />
+    <ClCompile Include="djpeg.c" />
+    <ClCompile Include="rdcolmap.c" />
+    <ClCompile Include="wrbmp.c" />
+    <ClCompile Include="wrgif.c" />
+    <ClCompile Include="wrppm.c" />
+    <ClCompile Include="wrrle.c" />
+    <ClCompile Include="wrtarga.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>
\ No newline at end of file
diff --git a/jpeg-8d/makefile.ansi b/jpeg-8d/makefile.ansi
new file mode 100644
index 0000000..7d0499f
--- /dev/null
+++ b/jpeg-8d/makefile.ansi
@@ -0,0 +1,221 @@
+# Makefile for Independent JPEG Group's software
+
+# This makefile is suitable for Unix-like systems with ANSI-capable compilers.
+# If you have a non-ANSI compiler, makefile.unix is a better starting point.
+
+# Read installation instructions before saying "make" !!
+
+# The name of your C compiler:
+CC= cc
+
+# You may need to adjust these cc options:
+CFLAGS= -O
+# Generally, we recommend defining any configuration symbols in jconfig.h,
+# NOT via -D switches here.
+
+# Link-time cc options:
+LDFLAGS= 
+
+# To link any special libraries, add the necessary -l commands here.
+LDLIBS= 
+
+# Put here the object file name for the correct system-dependent memory
+# manager file.  For Unix this is usually jmemnobs.o, but you may want
+# to use jmemansi.o or jmemname.o if you have limited swap space.
+SYSDEPMEM= jmemnobs.o
+
+# miscellaneous OS-dependent stuff
+# linker
+LN= $(CC)
+# file deletion command
+RM= rm -f
+# library (.a) file creation command
+AR= ar rc
+# second step in .a creation (use "touch" if not needed)
+AR2= ranlib
+
+# End of configurable options.
+
+
+# source files: JPEG library proper
+LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c
+# memmgr back ends: compile only one of these into a working library
+SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
+APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
+        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
+        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
+SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
+# files included by source files
+INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
+        jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
+# documentation, test, and support files
+DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
+        wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
+        coderules.txt filelist.txt change.log
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makefile.mms makefile.vms makvms.opt
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
+        libjpeg.map
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
+        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
+# library object files common to compression and decompression
+COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
+# compression library object files
+CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \
+        jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \
+        jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \
+        jfdctflt.o jfdctint.o
+# decompression library object files
+DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \
+        jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \
+        jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \
+        jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
+# These objectfiles are included in libjpeg.a
+LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
+# object files for sample applications (excluding library files)
+COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
+        cdjpeg.o
+DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
+        cdjpeg.o
+TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
+
+
+all: libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom
+
+libjpeg.a: $(LIBOBJECTS)
+	$(RM) libjpeg.a
+	$(AR) libjpeg.a  $(LIBOBJECTS)
+	$(AR2) libjpeg.a
+
+cjpeg: $(COBJECTS) libjpeg.a
+	$(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS)
+
+djpeg: $(DOBJECTS) libjpeg.a
+	$(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS)
+
+jpegtran: $(TROBJECTS) libjpeg.a
+	$(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS)
+
+rdjpgcom: rdjpgcom.o
+	$(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
+
+wrjpgcom: wrjpgcom.o
+	$(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
+
+jconfig.h: jconfig.txt
+	echo You must prepare a system-dependent jconfig.h file.
+	echo Please read the installation directions in install.txt.
+	exit 1
+
+clean:
+	$(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom
+	$(RM) core testout*
+
+test: cjpeg djpeg jpegtran
+	$(RM) testout*
+	./djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+	./cjpeg -dct int -outfile testout.jpg  testimg.ppm
+	./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	./jpegtran -outfile testoutt.jpg testprog.jpg
+	cmp testimg.ppm testout.ppm
+	cmp testimg.bmp testout.bmp
+	cmp testimg.jpg testout.jpg
+	cmp testimg.ppm testoutp.ppm
+	cmp testimgp.jpg testoutp.jpg
+	cmp testorig.jpg testoutt.jpg
+
+
+jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
+jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
+rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
+wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
+cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
+rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/jpeg-8d/makefile.bcc b/jpeg-8d/makefile.bcc
new file mode 100644
index 0000000..d89e09b
--- /dev/null
+++ b/jpeg-8d/makefile.bcc
@@ -0,0 +1,292 @@
+# Makefile for Independent JPEG Group's software
+
+# This makefile is suitable for Borland C on MS-DOS or OS/2.
+# It works with Borland C++ for DOS, revision 3.0 or later,
+# and has been tested with Borland C++ for OS/2.
+# Watch out for optimization bugs in the OS/2 compilers --- see notes below!
+# Thanks to Tom Wright and Ge' Weijers (original DOS) and
+# Ken Porter (OS/2) for this file.
+
+# Read installation instructions before saying "make" !!
+
+# Are we under DOS or OS/2?
+!if !$d(DOS) && !$d(OS2)
+!if $d(__OS2__)
+OS2=1
+!else
+DOS=1
+!endif
+!endif
+
+# The name of your C compiler:
+CC= bcc
+
+# You may need to adjust these cc options:
+!if $d(DOS)
+CFLAGS= -O2 -mm -w-par -w-stu -w-ccc -w-rch
+!else
+CFLAGS= -O1 -w-par -w-stu -w-ccc -w-rch
+!endif
+# -O2 enables full code optimization (for pre-3.0 Borland C++, use -O -G -Z).
+# -O2 is buggy in Borland OS/2 C++ revision 2.0, so use -O1 there for now.
+# If you have Borland OS/2 C++ revision 1.0, use -O or no optimization at all.
+# -mm selects medium memory model (near data, far code pointers; DOS only!)
+# -w-par suppresses warnings about unused function parameters
+# -w-stu suppresses warnings about incomplete structures
+# -w-ccc suppresses warnings about compile-time-constant conditions
+# -w-rch suppresses warnings about unreachable code
+# Generally, we recommend defining any configuration symbols in jconfig.h,
+# NOT via -D switches here.
+
+# Link-time cc options:
+!if $d(DOS)
+LDFLAGS= -mm
+# memory model option here must match CFLAGS!
+!else
+LDFLAGS=
+# -lai full-screen app
+# -lc case-significant link
+!endif
+
+# Put here the object file name for the correct system-dependent memory
+# manager file.
+# For DOS, we recommend jmemdos.c and jmemdosa.asm.
+# For OS/2, we recommend jmemnobs.c (flat memory!)
+# SYSDEPMEMLIB must list the same files with "+" signs for the librarian.
+!if $d(DOS)
+SYSDEPMEM= jmemdos.obj jmemdosa.obj
+SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj
+!else
+SYSDEPMEM= jmemnobs.obj
+SYSDEPMEMLIB= +jmemnobs.obj
+!endif
+
+# End of configurable options.
+
+
+# source files: JPEG library proper
+LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c
+# memmgr back ends: compile only one of these into a working library
+SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
+APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
+        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
+        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
+SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
+# files included by source files
+INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
+        jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
+# documentation, test, and support files
+DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
+        wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
+        coderules.txt filelist.txt change.log
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makefile.mms makefile.vms makvms.opt
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
+        libjpeg.map
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
+        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
+# library object files common to compression and decompression
+COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
+# compression library object files
+CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \
+        jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \
+        jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \
+        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
+# decompression library object files
+DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \
+        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \
+        jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \
+        jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \
+        jdmerge.obj
+# These objectfiles are included in libjpeg.lib
+LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
+# object files for sample applications (excluding library files)
+COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
+        rdswitch.obj cdjpeg.obj
+DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
+        rdcolmap.obj cdjpeg.obj
+TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
+
+
+all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
+
+libjpeg.lib: $(LIBOBJECTS)
+	- del libjpeg.lib
+	tlib libjpeg.lib /E /C @&&|
++jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj +jcparam.obj &
++jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj &
++jcprepct.obj +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj &
++jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj &
++jdapistd.obj +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj &
++jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj +jdcoefct.obj &
++jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj &
++jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj +jdmerge.obj &
++jaricom.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj &
+$(SYSDEPMEMLIB)
+|
+
+cjpeg.exe: $(COBJECTS) libjpeg.lib
+	$(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib
+
+djpeg.exe: $(DOBJECTS) libjpeg.lib
+	$(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib
+
+jpegtran.exe: $(TROBJECTS) libjpeg.lib
+	$(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib
+
+rdjpgcom.exe: rdjpgcom.c
+!if $d(DOS)
+	$(CC) -ms -O rdjpgcom.c
+!else
+	$(CC) $(CFLAGS) rdjpgcom.c
+!endif
+
+# On DOS, wrjpgcom needs large model so it can malloc a 64K chunk
+wrjpgcom.exe: wrjpgcom.c
+!if $d(DOS)
+	$(CC) -ml -O wrjpgcom.c
+!else
+	$(CC) $(CFLAGS) wrjpgcom.c
+!endif
+
+# This "{}" syntax allows Borland Make to "batch" source files.
+# In this way, each run of the compiler can build many modules.
+.c.obj:
+	$(CC) $(CFLAGS) -c{ $<}
+
+jconfig.h: jconfig.txt
+	echo You must prepare a system-dependent jconfig.h file.
+	echo Please read the installation directions in install.txt.
+	exit 1
+
+clean:
+	- del *.obj
+	- del libjpeg.lib
+	- del cjpeg.exe
+	- del djpeg.exe
+	- del jpegtran.exe
+	- del rdjpgcom.exe
+	- del wrjpgcom.exe
+	- del testout*.*
+
+test: cjpeg.exe djpeg.exe jpegtran.exe
+	- del testout*.*
+	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+	djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+	cjpeg -dct int -outfile testout.jpg  testimg.ppm
+	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	jpegtran -outfile testoutt.jpg testprog.jpg
+!if $d(DOS)
+	fc /b testimg.ppm testout.ppm
+	fc /b testimg.bmp testout.bmp
+	fc /b testimg.jpg testout.jpg
+	fc /b testimg.ppm testoutp.ppm
+	fc /b testimgp.jpg testoutp.jpg
+	fc /b testorig.jpg testoutt.jpg
+!else
+	echo n > n.tmp
+	comp testimg.ppm testout.ppm < n.tmp
+	comp testimg.bmp testout.bmp < n.tmp
+	comp testimg.jpg testout.jpg < n.tmp
+	comp testimg.ppm testoutp.ppm < n.tmp
+	comp testimgp.jpg testoutp.jpg < n.tmp
+	comp testorig.jpg testoutt.jpg < n.tmp
+	del n.tmp
+!endif
+
+
+jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
+jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
+rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
+wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
+cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
+rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+jmemdosa.obj: jmemdosa.asm
+	tasm /mx jmemdosa.asm
diff --git a/jpeg-8d/makefile.dj b/jpeg-8d/makefile.dj
new file mode 100644
index 0000000..37b6ee7
--- /dev/null
+++ b/jpeg-8d/makefile.dj
@@ -0,0 +1,227 @@
+# Makefile for Independent JPEG Group's software
+
+# This makefile is for DJGPP (Delorie's GNU C port on MS-DOS), v2.0 or later.
+# Thanks to Frank J. Donahoe for this version.
+
+# Read installation instructions before saying "make" !!
+
+# The name of your C compiler:
+CC= gcc
+
+# You may need to adjust these cc options:
+CFLAGS= -O2 -Wall -I.
+# Generally, we recommend defining any configuration symbols in jconfig.h,
+# NOT via -D switches here.
+
+# Link-time cc options:
+LDFLAGS= -s
+
+# To link any special libraries, add the necessary -l commands here.
+LDLIBS= 
+
+# Put here the object file name for the correct system-dependent memory
+# manager file.  For DJGPP this is usually jmemnobs.o, but you could
+# use jmemname.o if you want to use named temp files instead of swap space.
+SYSDEPMEM= jmemnobs.o
+
+# miscellaneous OS-dependent stuff
+# linker
+LN= $(CC)
+# file deletion command
+RM= del
+# library (.a) file creation command
+AR= ar rc
+# second step in .a creation (use "touch" if not needed)
+AR2= ranlib
+
+# End of configurable options.
+
+
+# source files: JPEG library proper
+LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c
+# memmgr back ends: compile only one of these into a working library
+SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
+APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
+        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
+        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
+SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
+# files included by source files
+INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
+        jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
+# documentation, test, and support files
+DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
+        wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
+        coderules.txt filelist.txt change.log
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makefile.mms makefile.vms makvms.opt
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
+        libjpeg.map
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
+        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
+# library object files common to compression and decompression
+COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
+# compression library object files
+CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \
+        jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \
+        jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \
+        jfdctflt.o jfdctint.o
+# decompression library object files
+DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \
+        jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \
+        jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \
+        jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
+# These objectfiles are included in libjpeg.a
+LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
+# object files for sample applications (excluding library files)
+COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
+        cdjpeg.o
+DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
+        cdjpeg.o
+TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
+
+
+all: libjpeg.a cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
+
+libjpeg.a: $(LIBOBJECTS)
+	$(RM) libjpeg.a
+	$(AR) libjpeg.a  $(LIBOBJECTS)
+	$(AR2) libjpeg.a
+
+cjpeg.exe: $(COBJECTS) libjpeg.a
+	$(LN) $(LDFLAGS) -o cjpeg.exe $(COBJECTS) libjpeg.a $(LDLIBS)
+
+djpeg.exe: $(DOBJECTS) libjpeg.a
+	$(LN) $(LDFLAGS) -o djpeg.exe $(DOBJECTS) libjpeg.a $(LDLIBS)
+
+jpegtran.exe: $(TROBJECTS) libjpeg.a
+	$(LN) $(LDFLAGS) -o jpegtran.exe $(TROBJECTS) libjpeg.a $(LDLIBS)
+
+rdjpgcom.exe: rdjpgcom.o
+	$(LN) $(LDFLAGS) -o rdjpgcom.exe rdjpgcom.o $(LDLIBS)
+
+wrjpgcom.exe: wrjpgcom.o
+	$(LN) $(LDFLAGS) -o wrjpgcom.exe wrjpgcom.o $(LDLIBS)
+
+jconfig.h: jconfig.txt
+	echo You must prepare a system-dependent jconfig.h file.
+	echo Please read the installation directions in install.txt.
+	exit 1
+
+clean:
+	$(RM) *.o
+	$(RM) cjpeg.exe
+	$(RM) djpeg.exe
+	$(RM) jpegtran.exe
+	$(RM) rdjpgcom.exe
+	$(RM) wrjpgcom.exe
+	$(RM) libjpeg.a
+	$(RM) testout*.*
+
+test: cjpeg.exe djpeg.exe jpegtran.exe
+	$(RM) testout*.*
+	./djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+	./cjpeg -dct int -outfile testout.jpg  testimg.ppm
+	./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	./jpegtran -outfile testoutt.jpg testprog.jpg
+	fc /b testimg.ppm testout.ppm
+	fc /b testimg.bmp testout.bmp
+	fc /b testimg.jpg testout.jpg
+	fc /b testimg.ppm testoutp.ppm
+	fc /b testimgp.jpg testoutp.jpg
+	fc /b testorig.jpg testoutt.jpg
+
+
+jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
+jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
+rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
+wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
+cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
+rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/jpeg-8d/makefile.manx b/jpeg-8d/makefile.manx
new file mode 100644
index 0000000..471f408
--- /dev/null
+++ b/jpeg-8d/makefile.manx
@@ -0,0 +1,221 @@
+# Makefile for Independent JPEG Group's software
+
+# This makefile is for Amiga systems using Manx Aztec C ver 5.x.
+# Thanks to D.J. James (djjames@cup.portal.com) for this version.
+
+# Read installation instructions before saying "make" !!
+
+# The name of your C compiler:
+CC= cc
+
+# You may need to adjust these cc options:
+# Uncomment for generic 68000 code (will work on any Amiga)
+ARCHFLAGS= -sn
+
+# Uncomment for 68020/68030 code (faster, but won't run on 68000 CPU)
+#ARCHFLAGS= -c2
+
+CFLAGS= -MC -MD $(ARCHFLAGS) -spfam -r4
+
+# Link-time cc options:
+LDFLAGS= -g
+
+# To link any special libraries, add the necessary -l commands here.
+LDLIBS= -lml -lcl
+
+# Put here the object file name for the correct system-dependent memory
+# manager file.  For Amiga we recommend jmemname.o.
+SYSDEPMEM= jmemname.o
+
+# miscellaneous OS-dependent stuff
+# linker
+LN= ln
+# file deletion command
+RM= delete quiet
+# library (.lib) file creation command
+AR= lb
+
+# End of configurable options.
+
+
+# source files: JPEG library proper
+LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c
+# memmgr back ends: compile only one of these into a working library
+SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
+APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
+        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
+        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
+SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
+# files included by source files
+INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
+        jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
+# documentation, test, and support files
+DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
+        wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
+        coderules.txt filelist.txt change.log
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makefile.mms makefile.vms makvms.opt
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
+        libjpeg.map
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
+        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
+# library object files common to compression and decompression
+COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
+# compression library object files
+CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \
+        jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \
+        jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \
+        jfdctflt.o jfdctint.o
+# decompression library object files
+DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \
+        jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \
+        jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \
+        jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
+# These objectfiles are included in libjpeg.lib
+LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
+# object files for sample applications (excluding library files)
+COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
+        cdjpeg.o
+DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
+        cdjpeg.o
+TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
+
+
+all: libjpeg.lib cjpeg djpeg jpegtran rdjpgcom wrjpgcom
+
+libjpeg.lib: $(LIBOBJECTS)
+	-$(RM) libjpeg.lib
+	$(AR) libjpeg.lib  $(LIBOBJECTS)
+
+cjpeg: $(COBJECTS) libjpeg.lib
+	$(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.lib $(LDLIBS)
+
+djpeg: $(DOBJECTS) libjpeg.lib
+	$(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.lib $(LDLIBS)
+
+jpegtran: $(TROBJECTS) libjpeg.lib
+	$(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.lib $(LDLIBS)
+
+rdjpgcom: rdjpgcom.o
+	$(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
+
+wrjpgcom: wrjpgcom.o
+	$(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
+
+jconfig.h: jconfig.txt
+	echo You must prepare a system-dependent jconfig.h file.
+	echo Please read the installation directions in install.txt.
+	exit 1
+
+clean:
+	-$(RM) *.o cjpeg djpeg jpegtran libjpeg.lib rdjpgcom wrjpgcom
+	-$(RM) core testout*.*
+
+test: cjpeg djpeg jpegtran
+	-$(RM) testout*.*
+	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+	djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+	cjpeg -dct int -outfile testout.jpg  testimg.ppm
+	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	jpegtran -outfile testoutt.jpg testprog.jpg
+	cmp testimg.ppm testout.ppm
+	cmp testimg.bmp testout.bmp
+	cmp testimg.jpg testout.jpg
+	cmp testimg.ppm testoutp.ppm
+	cmp testimgp.jpg testoutp.jpg
+	cmp testorig.jpg testoutt.jpg
+
+
+jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
+jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
+rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
+wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
+cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
+rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/jpeg-8d/makefile.mc6 b/jpeg-8d/makefile.mc6
new file mode 100644
index 0000000..1ee83be
--- /dev/null
+++ b/jpeg-8d/makefile.mc6
@@ -0,0 +1,256 @@
+# Makefile for Independent JPEG Group's software
+
+# This makefile is for Microsoft C for MS-DOS, version 6.00A and up.
+# Use NMAKE, not Microsoft's brain-damaged MAKE.
+# Thanks to Alan Wright and Chris Turner of Olivetti Research Ltd.
+
+# Read installation instructions before saying "nmake" !!
+
+# You may need to adjust these compiler options:
+CFLAGS = -AM -Oecigt -Gs -W3
+# -AM medium memory model (or use -AS for small model, if you remove features)
+# -Oecigt -Gs  maximum safe optimisation (-Ol has bugs in MSC 6.00A)
+# -W3 warning level 3
+# You might also want to add -G2 if you have an 80286, etc.
+# Generally, we recommend defining any configuration symbols in jconfig.h,
+# NOT via -D switches here.
+
+# Jan-Herman Buining suggests the following switches for MS C 8.0 and a 486:
+# CFLAGS = /AM /f- /FPi87 /G3 /Gs /Gy /Ob1 /Oc /Oe /Og /Oi /Ol /On /Oo /Ot \
+#          /OV4 /W3
+# except for jquant1.c, which must be compiled with /Oo- to avoid a compiler
+# crash.
+
+# Ingar Steinsland suggests the following switches when building
+# a 16-bit Windows DLL:
+# CFLAGS = -ALw -Gsw -Zpe -W3 -O2 -Zi -Zd
+
+# Put here the object file name for the correct system-dependent memory
+# manager file.  For DOS, we recommend jmemdos.c and jmemdosa.asm.
+# (But not for Windows; see install.txt if you use this makefile for Windows.)
+SYSDEPMEM= jmemdos.obj jmemdosa.obj
+# SYSDEPMEMLIB must list the same files with "+" signs for the librarian.
+SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj
+
+# End of configurable options.
+
+
+# source files: JPEG library proper
+LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c
+# memmgr back ends: compile only one of these into a working library
+SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
+APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
+        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
+        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
+SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
+# files included by source files
+INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
+        jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
+# documentation, test, and support files
+DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
+        wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
+        coderules.txt filelist.txt change.log
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makefile.mms makefile.vms makvms.opt
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
+        libjpeg.map
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
+        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
+# library object files common to compression and decompression
+COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
+# compression library object files
+CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \
+        jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \
+        jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \
+        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
+# decompression library object files
+DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \
+        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \
+        jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \
+        jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \
+        jdmerge.obj
+# These objectfiles are included in libjpeg.lib
+LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
+# object files for sample applications (excluding library files)
+COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
+        rdswitch.obj cdjpeg.obj
+DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
+        rdcolmap.obj cdjpeg.obj
+TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
+
+# need linker response file because file list > 128 chars
+RFILE = libjpeg.ans
+
+
+all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
+
+libjpeg.lib: $(LIBOBJECTS) $(RFILE)
+	del libjpeg.lib
+	lib @$(RFILE)
+
+# linker response file for building libjpeg.lib
+$(RFILE) : makefile
+	del $(RFILE)
+	echo libjpeg.lib >$(RFILE)
+# silly want-to-create-it prompt:
+	echo y >>$(RFILE)
+	echo +jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj & >>$(RFILE)
+	echo +jcparam.obj +jdatadst.obj +jcinit.obj +jcmaster.obj & >>$(RFILE)
+	echo +jcmarker.obj +jcmainct.obj +jcprepct.obj & >>$(RFILE)
+	echo +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & >>$(RFILE)
+	echo +jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj & >>$(RFILE)
+	echo +jfdctint.obj +jdapimin.obj +jdapistd.obj & >>$(RFILE)
+	echo +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & >>$(RFILE)
+	echo +jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj & >>$(RFILE)
+	echo +jdcoefct.obj +jdpostct.obj +jddctmgr.obj & >>$(RFILE)
+	echo +jidctfst.obj +jidctflt.obj +jidctint.obj & >>$(RFILE)
+	echo +jdsample.obj +jdcolor.obj +jquant1.obj & >>$(RFILE)
+	echo +jquant2.obj +jdmerge.obj +jaricom.obj +jcomapi.obj & >>$(RFILE)
+	echo +jutils.obj +jerror.obj +jmemmgr.obj & >>$(RFILE)
+	echo $(SYSDEPMEMLIB) ; >>$(RFILE)
+
+cjpeg.exe: $(COBJECTS) libjpeg.lib
+	echo $(COBJECTS) >cjpeg.lst
+	link /STACK:4096 /EXEPACK @cjpeg.lst, cjpeg.exe, , libjpeg.lib, ;
+	del cjpeg.lst
+
+djpeg.exe: $(DOBJECTS) libjpeg.lib
+	echo $(DOBJECTS) >djpeg.lst
+	link /STACK:4096 /EXEPACK @djpeg.lst, djpeg.exe, , libjpeg.lib, ;
+	del djpeg.lst
+
+jpegtran.exe: $(TROBJECTS) libjpeg.lib
+	link /STACK:4096 /EXEPACK $(TROBJECTS), jpegtran.exe, , libjpeg.lib, ;
+
+rdjpgcom.exe: rdjpgcom.c
+	$(CC) -AS -O -W3 rdjpgcom.c
+
+# wrjpgcom needs large model so it can malloc a 64K chunk
+wrjpgcom.exe: wrjpgcom.c
+	$(CC) -AL -O -W3 wrjpgcom.c
+
+jconfig.h: jconfig.txt
+	echo You must prepare a system-dependent jconfig.h file.
+	echo Please read the installation directions in install.txt.
+	exit 1
+
+clean:
+	del *.obj
+	del libjpeg.lib
+	del cjpeg.exe
+	del djpeg.exe
+	del jpegtran.exe
+	del rdjpgcom.exe
+	del wrjpgcom.exe
+	del testout*.*
+
+test: cjpeg.exe djpeg.exe jpegtran.exe
+	del testout*.*
+	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+	djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+	cjpeg -dct int -outfile testout.jpg  testimg.ppm
+	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	jpegtran -outfile testoutt.jpg testprog.jpg
+	fc /b testimg.ppm testout.ppm
+	fc /b testimg.bmp testout.bmp
+	fc /b testimg.jpg testout.jpg
+	fc /b testimg.ppm testoutp.ppm
+	fc /b testimgp.jpg testoutp.jpg
+	fc /b testorig.jpg testoutt.jpg
+
+
+jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
+jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
+rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
+wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
+cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
+rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+jmemdosa.obj : jmemdosa.asm
+	masm /mx $*;
diff --git a/jpeg-8d/makefile.mms b/jpeg-8d/makefile.mms
new file mode 100644
index 0000000..6019dfa
--- /dev/null
+++ b/jpeg-8d/makefile.mms
@@ -0,0 +1,225 @@
+# Makefile for Independent JPEG Group's software
+
+# This makefile is for use with MMS on Digital VMS systems.
+# Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu)
+# and Tim Bell (tbell@netcom.com) for their help.
+
+# Read installation instructions before saying "MMS" !!
+
+# You may need to adjust these cc options:
+CFLAGS= $(CFLAGS) /NoDebug /Optimize
+# Generally, we recommend defining any configuration symbols in jconfig.h,
+# NOT via /Define switches here.
+.ifdef ALPHA
+OPT=
+.else
+OPT= ,Sys$Disk:[]MAKVMS.OPT/Option
+.endif
+
+# Put here the object file name for the correct system-dependent memory
+# manager file.  For Unix this is usually jmemnobs.o, but you may want
+# to use jmemansi.o or jmemname.o if you have limited swap space.
+SYSDEPMEM= jmemnobs.obj
+
+# End of configurable options.
+
+
+# source files: JPEG library proper
+LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c
+# memmgr back ends: compile only one of these into a working library
+SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
+APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
+        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
+        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
+SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
+# files included by source files
+INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
+        jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
+# documentation, test, and support files
+DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
+        wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
+        coderules.txt filelist.txt change.log
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makefile.mms makefile.vms makvms.opt
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
+        libjpeg.map
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
+        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
+# library object files common to compression and decompression
+COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
+# compression library object files
+CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \
+        jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \
+        jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \
+        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
+# decompression library object files
+DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \
+        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \
+        jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \
+        jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \
+        jdmerge.obj
+# These objectfiles are included in libjpeg.olb
+LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
+# object files for sample applications (excluding library files)
+COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
+        rdswitch.obj cdjpeg.obj
+DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
+        rdcolmap.obj cdjpeg.obj
+TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
+# objectfile lists with commas --- what a crock
+COBJLIST= cjpeg.obj,rdppm.obj,rdgif.obj,rdtarga.obj,rdrle.obj,rdbmp.obj,\
+          rdswitch.obj,cdjpeg.obj
+DOBJLIST= djpeg.obj,wrppm.obj,wrgif.obj,wrtarga.obj,wrrle.obj,wrbmp.obj,\
+          rdcolmap.obj,cdjpeg.obj
+TROBJLIST= jpegtran.obj,rdswitch.obj,cdjpeg.obj,transupp.obj
+LIBOBJLIST= jaricom.obj,jcapimin.obj,jcapistd.obj,jcarith.obj,jctrans.obj,\
+          jcparam.obj,jdatadst.obj,jcinit.obj,jcmaster.obj,jcmarker.obj,\
+          jcmainct.obj,jcprepct.obj,jccoefct.obj,jccolor.obj,jcsample.obj,\
+          jchuff.obj,jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj,jfdctint.obj,\
+          jdapimin.obj,jdapistd.obj,jdarith.obj,jdtrans.obj,jdatasrc.obj,\
+          jdmaster.obj,jdinput.obj,jdmarker.obj,jdhuff.obj,jdmainct.obj,\
+          jdcoefct.obj,jdpostct.obj,jddctmgr.obj,jidctfst.obj,jidctflt.obj,\
+          jidctint.obj,jdsample.obj,jdcolor.obj,jquant1.obj,jquant2.obj,\
+          jdmerge.obj,jcomapi.obj,jutils.obj,jerror.obj,jmemmgr.obj,$(SYSDEPMEM)
+
+
+.first
+	@- Define /NoLog Sys Sys$Library
+
+ALL : libjpeg.olb cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
+	@ Continue
+
+libjpeg.olb : $(LIBOBJECTS)
+	Library /Create libjpeg.olb $(LIBOBJLIST)
+
+cjpeg.exe : $(COBJECTS) libjpeg.olb
+	$(LINK) $(LFLAGS) /Executable = cjpeg.exe $(COBJLIST),libjpeg.olb/Library$(OPT)
+
+djpeg.exe : $(DOBJECTS) libjpeg.olb
+	$(LINK) $(LFLAGS) /Executable = djpeg.exe $(DOBJLIST),libjpeg.olb/Library$(OPT)
+
+jpegtran.exe : $(TROBJECTS) libjpeg.olb
+	$(LINK) $(LFLAGS) /Executable = jpegtran.exe $(TROBJLIST),libjpeg.olb/Library$(OPT)
+
+rdjpgcom.exe : rdjpgcom.obj
+	$(LINK) $(LFLAGS) /Executable = rdjpgcom.exe rdjpgcom.obj$(OPT)
+
+wrjpgcom.exe : wrjpgcom.obj
+	$(LINK) $(LFLAGS) /Executable = wrjpgcom.exe wrjpgcom.obj$(OPT)
+
+jconfig.h : jconfig.vms
+	@- Copy jconfig.vms jconfig.h
+
+clean :
+	@- Set Protection = Owner:RWED *.*;-1
+	@- Set Protection = Owner:RWED *.OBJ
+	- Purge /NoLog /NoConfirm *.*
+	- Delete /NoLog /NoConfirm *.OBJ;
+
+test : cjpeg.exe djpeg.exe jpegtran.exe
+	mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
+	mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
+	mcr sys$disk:[]cjpeg -dct int      -outfile testout.jpg testimg.ppm
+	mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg
+	- Backup /Compare/Log	  testimg.ppm testout.ppm
+	- Backup /Compare/Log	  testimg.bmp testout.bmp
+	- Backup /Compare/Log	  testimg.jpg testout.jpg
+	- Backup /Compare/Log	  testimg.ppm testoutp.ppm
+	- Backup /Compare/Log	  testimgp.jpg testoutp.jpg
+	- Backup /Compare/Log	  testorig.jpg testoutt.jpg
+
+
+jaricom.obj : jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapimin.obj : jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapistd.obj : jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcarith.obj : jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccoefct.obj : jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccolor.obj : jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcdctmgr.obj : jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jchuff.obj : jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcinit.obj : jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmainct.obj : jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmarker.obj : jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmaster.obj : jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcomapi.obj : jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcparam.obj : jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcprepct.obj : jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcsample.obj : jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jctrans.obj : jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapimin.obj : jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapistd.obj : jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdarith.obj : jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdatadst.obj : jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdatasrc.obj : jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdcoefct.obj : jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdcolor.obj : jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jddctmgr.obj : jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jdhuff.obj : jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdinput.obj : jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmainct.obj : jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmarker.obj : jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmaster.obj : jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmerge.obj : jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdpostct.obj : jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdsample.obj : jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdtrans.obj : jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jerror.obj : jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
+jfdctflt.obj : jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctfst.obj : jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctint.obj : jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctflt.obj : jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctfst.obj : jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctint.obj : jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jquant1.obj : jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jquant2.obj : jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jutils.obj : jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jmemmgr.obj : jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemansi.obj : jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemname.obj : jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemnobs.obj : jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemdos.obj : jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemmac.obj : jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+cjpeg.obj : cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+djpeg.obj : djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+jpegtran.obj : jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
+rdjpgcom.obj : rdjpgcom.c jinclude.h jconfig.h
+wrjpgcom.obj : wrjpgcom.c jinclude.h jconfig.h
+cdjpeg.obj : cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdcolmap.obj : rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdswitch.obj : rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+transupp.obj : transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
+rdppm.obj : rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrppm.obj : wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdgif.obj : rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrgif.obj : wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdtarga.obj : rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrtarga.obj : wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdbmp.obj : rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrbmp.obj : wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdrle.obj : rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrrle.obj : wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/jpeg-8d/makefile.sas b/jpeg-8d/makefile.sas
new file mode 100644
index 0000000..252f8fb
--- /dev/null
+++ b/jpeg-8d/makefile.sas
@@ -0,0 +1,259 @@
+# Makefile for Independent JPEG Group's software
+
+# This makefile is for Amiga systems using SAS C 6.0 and up.
+# Thanks to Ed Hanway, Mark Rinfret, and Jim Zepeda.
+
+# Read installation instructions before saying "make" !!
+
+# The name of your C compiler:
+CC= sc
+
+# You may need to adjust these cc options:
+# Uncomment the following lines for generic 680x0 version
+ARCHFLAGS= cpu=any
+SUFFIX=
+
+# Uncomment the following lines for 68030-only version
+#ARCHFLAGS= cpu=68030
+#SUFFIX=.030
+
+CFLAGS= nostackcheck data=near parms=register optimize $(ARCHFLAGS) \
+	ignore=104 ignore=304 ignore=306
+# ignore=104 disables warnings for mismatched const qualifiers
+# ignore=304 disables warnings for variables being optimized out
+# ignore=306 disables warnings for the inlining of functions
+# Generally, we recommend defining any configuration symbols in jconfig.h,
+# NOT via define switches here.
+
+# Link-time cc options:
+LDFLAGS= SC SD ND BATCH
+
+# To link any special libraries, add the necessary commands here.
+LDLIBS= LIB:scm.lib LIB:sc.lib
+
+# Put here the object file name for the correct system-dependent memory
+# manager file.  For Amiga we recommend jmemname.o.
+SYSDEPMEM= jmemname.o
+
+# miscellaneous OS-dependent stuff
+# linker
+LN= slink
+# file deletion command
+RM= delete quiet
+# library (.lib) file creation command
+AR= oml
+
+# End of configurable options.
+
+
+# source files: JPEG library proper
+LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c
+# memmgr back ends: compile only one of these into a working library
+SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
+APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
+        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
+        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
+SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
+# files included by source files
+INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
+        jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
+# documentation, test, and support files
+DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
+        wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
+        coderules.txt filelist.txt change.log
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makefile.mms makefile.vms makvms.opt
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
+        libjpeg.map
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
+        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
+# library object files common to compression and decompression
+COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
+# compression library object files
+CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \
+        jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \
+        jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \
+        jfdctflt.o jfdctint.o
+# decompression library object files
+DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \
+        jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \
+        jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \
+        jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
+# These objectfiles are included in libjpeg.lib
+LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
+# object files for sample applications (excluding library files)
+COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
+        cdjpeg.o
+DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
+        cdjpeg.o
+TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
+
+
+all: libjpeg.lib cjpeg$(SUFFIX) djpeg$(SUFFIX) jpegtran$(SUFFIX) rdjpgcom$(SUFFIX) wrjpgcom$(SUFFIX)
+
+# note: do several AR steps to avoid command line length limitations
+
+libjpeg.lib: $(LIBOBJECTS)
+	-$(RM) libjpeg.lib
+	$(AR) libjpeg.lib r $(CLIBOBJECTS)
+	$(AR) libjpeg.lib r $(DLIBOBJECTS)
+	$(AR) libjpeg.lib r $(COMOBJECTS)
+
+cjpeg$(SUFFIX): $(COBJECTS) libjpeg.lib
+	$(LN) <WITH <
+$(LDFLAGS)
+TO cjpeg$(SUFFIX)
+FROM LIB:c.o $(COBJECTS)
+LIB libjpeg.lib $(LDLIBS)
+<
+
+djpeg$(SUFFIX): $(DOBJECTS) libjpeg.lib
+	$(LN) <WITH <
+$(LDFLAGS)
+TO djpeg$(SUFFIX)
+FROM LIB:c.o $(DOBJECTS)
+LIB libjpeg.lib $(LDLIBS)
+<
+
+jpegtran$(SUFFIX): $(TROBJECTS) libjpeg.lib
+	$(LN) <WITH <
+$(LDFLAGS)
+TO jpegtran$(SUFFIX)
+FROM LIB:c.o $(TROBJECTS)
+LIB libjpeg.lib $(LDLIBS)
+<
+
+rdjpgcom$(SUFFIX): rdjpgcom.o
+	$(LN) <WITH <
+$(LDFLAGS)
+TO rdjpgcom$(SUFFIX)
+FROM LIB:c.o rdjpgcom.o
+LIB $(LDLIBS)
+<
+
+wrjpgcom$(SUFFIX): wrjpgcom.o
+	$(LN) <WITH <
+$(LDFLAGS)
+TO wrjpgcom$(SUFFIX)
+FROM LIB:c.o wrjpgcom.o
+LIB $(LDLIBS)
+<
+
+jconfig.h: jconfig.txt
+	echo You must prepare a system-dependent jconfig.h file.
+	echo Please read the installation directions in install.txt.
+	exit 1
+
+clean:
+	-$(RM) *.o cjpeg djpeg jpegtran cjpeg.030 djpeg.030 jpegtran.030
+	-$(RM) rdjpgcom wrjpgcom rdjpgcom.030 wrjpgcom.030
+	-$(RM) libjpeg.lib core testout*.*
+
+test: cjpeg djpeg jpegtran
+	-$(RM) testout*.*
+	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+	djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+	cjpeg -dct int -outfile testout.jpg  testimg.ppm
+	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	jpegtran -outfile testoutt.jpg testprog.jpg
+	cmp testimg.ppm testout.ppm
+	cmp testimg.bmp testout.bmp
+	cmp testimg.jpg testout.jpg
+	cmp testimg.ppm testoutp.ppm
+	cmp testimgp.jpg testoutp.jpg
+	cmp testorig.jpg testoutt.jpg
+
+
+jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
+jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
+rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
+wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
+cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
+rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/jpeg-8d/makefile.unix b/jpeg-8d/makefile.unix
new file mode 100644
index 0000000..eaadfc1
--- /dev/null
+++ b/jpeg-8d/makefile.unix
@@ -0,0 +1,235 @@
+# Makefile for Independent JPEG Group's software
+
+# This makefile is suitable for Unix-like systems with non-ANSI compilers.
+# If you have an ANSI compiler, makefile.ansi is a better starting point.
+
+# Read installation instructions before saying "make" !!
+
+# The name of your C compiler:
+CC= cc
+
+# You may need to adjust these cc options:
+CFLAGS= -O
+# Generally, we recommend defining any configuration symbols in jconfig.h,
+# NOT via -D switches here.
+# However, any special defines for ansi2knr.c may be included here:
+ANSI2KNRFLAGS= 
+
+# Link-time cc options:
+LDFLAGS= 
+
+# To link any special libraries, add the necessary -l commands here.
+LDLIBS= 
+
+# Put here the object file name for the correct system-dependent memory
+# manager file.  For Unix this is usually jmemnobs.o, but you may want
+# to use jmemansi.o or jmemname.o if you have limited swap space.
+SYSDEPMEM= jmemnobs.o
+
+# miscellaneous OS-dependent stuff
+# linker
+LN= $(CC)
+# file deletion command
+RM= rm -f
+# file rename command
+MV= mv
+# library (.a) file creation command
+AR= ar rc
+# second step in .a creation (use "touch" if not needed)
+AR2= ranlib
+
+# End of configurable options.
+
+
+# source files: JPEG library proper
+LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c
+# memmgr back ends: compile only one of these into a working library
+SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
+APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
+        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
+        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
+SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
+# files included by source files
+INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
+        jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
+# documentation, test, and support files
+DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
+        wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
+        coderules.txt filelist.txt change.log
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makefile.mms makefile.vms makvms.opt
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
+        libjpeg.map
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
+        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
+# library object files common to compression and decompression
+COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
+# compression library object files
+CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \
+        jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \
+        jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \
+        jfdctflt.o jfdctint.o
+# decompression library object files
+DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \
+        jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \
+        jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \
+        jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
+# These objectfiles are included in libjpeg.a
+LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
+# object files for sample applications (excluding library files)
+COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
+        cdjpeg.o
+DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
+        cdjpeg.o
+TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
+
+
+all: ansi2knr libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom
+
+# This rule causes ansi2knr to be invoked.
+.c.o:
+	./ansi2knr $*.c T$*.c
+	$(CC) $(CFLAGS) -c T$*.c
+	$(RM) T$*.c $*.o
+	$(MV) T$*.o $*.o
+
+ansi2knr: ansi2knr.c
+	$(CC) $(CFLAGS) $(ANSI2KNRFLAGS) -o ansi2knr ansi2knr.c
+
+libjpeg.a: ansi2knr $(LIBOBJECTS)
+	$(RM) libjpeg.a
+	$(AR) libjpeg.a  $(LIBOBJECTS)
+	$(AR2) libjpeg.a
+
+cjpeg: ansi2knr $(COBJECTS) libjpeg.a
+	$(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS)
+
+djpeg: ansi2knr $(DOBJECTS) libjpeg.a
+	$(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS)
+
+jpegtran: ansi2knr $(TROBJECTS) libjpeg.a
+	$(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS)
+
+rdjpgcom: rdjpgcom.o
+	$(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
+
+wrjpgcom: wrjpgcom.o
+	$(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
+
+jconfig.h: jconfig.txt
+	echo You must prepare a system-dependent jconfig.h file.
+	echo Please read the installation directions in install.txt.
+	exit 1
+
+clean:
+	$(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom
+	$(RM) ansi2knr core testout*
+
+test: cjpeg djpeg jpegtran
+	$(RM) testout*
+	./djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+	./cjpeg -dct int -outfile testout.jpg  testimg.ppm
+	./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	./jpegtran -outfile testoutt.jpg testprog.jpg
+	cmp testimg.ppm testout.ppm
+	cmp testimg.bmp testout.bmp
+	cmp testimg.jpg testout.jpg
+	cmp testimg.ppm testoutp.ppm
+	cmp testimgp.jpg testoutp.jpg
+	cmp testorig.jpg testoutt.jpg
+
+
+jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
+jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
+rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
+wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
+cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
+rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/jpeg-8d/makefile.vc b/jpeg-8d/makefile.vc
new file mode 100644
index 0000000..d4df9d4
--- /dev/null
+++ b/jpeg-8d/makefile.vc
@@ -0,0 +1,273 @@
+# Makefile for Independent JPEG Group's software
+
+# This makefile is for Microsoft Visual C++ on Windows NT (and 95?).
+# It builds the IJG library as a statically linkable library (.LIB),
+# and builds the sample applications as console-mode apps.
+# Thanks to Xingong Chang, Raymond Everly and others.
+
+# Read installation instructions before saying "nmake" !!
+# To build an optimized library without debug info, say "nmake nodebug=1".
+
+# Pull in standard variable definitions
+!include <win32.mak>
+
+# You may want to adjust these compiler options:
+CFLAGS= $(cflags) $(cdebug) $(cvars) -I.
+# Generally, we recommend defining any configuration symbols in jconfig.h,
+# NOT via -D switches here.
+
+# Link-time options:
+LDFLAGS= $(ldebug) $(conlflags)
+
+# To link any special libraries, add the necessary commands here.
+LDLIBS= $(conlibs)
+
+# Put here the object file name for the correct system-dependent memory
+# manager file.  For NT we suggest jmemnobs.obj, which expects the OS to
+# provide adequate virtual memory.
+SYSDEPMEM= jmemnobs.obj
+
+# miscellaneous OS-dependent stuff
+# file deletion command
+RM= del
+
+# End of configurable options.
+
+
+# source files: JPEG library proper
+LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c
+# memmgr back ends: compile only one of these into a working library
+SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
+APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
+        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
+        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
+SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
+# files included by source files
+INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
+        jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
+# documentation, test, and support files
+DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
+        wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
+        coderules.txt filelist.txt change.log
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makefile.mms makefile.vms makvms.opt
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
+        libjpeg.map
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
+        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
+# library object files common to compression and decompression
+COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
+# compression library object files
+CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \
+        jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \
+        jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \
+        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
+# decompression library object files
+DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \
+        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \
+        jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \
+        jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \
+        jdmerge.obj
+# These objectfiles are included in libjpeg.lib
+LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
+# object files for sample applications (excluding library files)
+COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
+        rdswitch.obj cdjpeg.obj
+DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
+        rdcolmap.obj cdjpeg.obj
+TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
+
+# Template command for compiling .c to .obj
+.c.obj:
+	$(cc) $(CFLAGS) $*.c
+
+
+all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
+
+libjpeg.lib: $(LIBOBJECTS)
+	$(RM) libjpeg.lib
+	lib -out:libjpeg.lib  $(LIBOBJECTS)
+
+cjpeg.exe: $(COBJECTS) libjpeg.lib
+	$(link) $(LDFLAGS) -out:cjpeg.exe $(COBJECTS) libjpeg.lib $(LDLIBS)
+
+djpeg.exe: $(DOBJECTS) libjpeg.lib
+	$(link) $(LDFLAGS) -out:djpeg.exe $(DOBJECTS) libjpeg.lib $(LDLIBS)
+
+jpegtran.exe: $(TROBJECTS) libjpeg.lib
+	$(link) $(LDFLAGS) -out:jpegtran.exe $(TROBJECTS) libjpeg.lib $(LDLIBS)
+
+rdjpgcom.exe: rdjpgcom.obj
+	$(link) $(LDFLAGS) -out:rdjpgcom.exe rdjpgcom.obj $(LDLIBS)
+
+wrjpgcom.exe: wrjpgcom.obj
+	$(link) $(LDFLAGS) -out:wrjpgcom.exe wrjpgcom.obj $(LDLIBS)
+
+
+clean:
+	$(RM) *.obj *.exe libjpeg.lib
+	$(RM) testout*
+
+setup-vc6:
+	ren jconfig.vc jconfig.h
+	ren makejdsw.vc6 jpeg.dsw
+	ren makeadsw.vc6 apps.dsw
+	ren makejmak.vc6 jpeg.mak
+	ren makejdep.vc6 jpeg.dep
+	ren makejdsp.vc6 jpeg.dsp
+	ren makecmak.vc6 cjpeg.mak
+	ren makecdep.vc6 cjpeg.dep
+	ren makecdsp.vc6 cjpeg.dsp
+	ren makedmak.vc6 djpeg.mak
+	ren makeddep.vc6 djpeg.dep
+	ren makeddsp.vc6 djpeg.dsp
+	ren maketmak.vc6 jpegtran.mak
+	ren maketdep.vc6 jpegtran.dep
+	ren maketdsp.vc6 jpegtran.dsp
+	ren makermak.vc6 rdjpgcom.mak
+	ren makerdep.vc6 rdjpgcom.dep
+	ren makerdsp.vc6 rdjpgcom.dsp
+	ren makewmak.vc6 wrjpgcom.mak
+	ren makewdep.vc6 wrjpgcom.dep
+	ren makewdsp.vc6 wrjpgcom.dsp
+
+setup-v10:
+	ren jconfig.vc jconfig.h
+	ren makejsln.v10 jpeg.sln
+	ren makeasln.v10 apps.sln
+	ren makejvcx.v10 jpeg.vcxproj
+	ren makejfil.v10 jpeg.vcxproj.filters
+	ren makecvcx.v10 cjpeg.vcxproj
+	ren makecfil.v10 cjpeg.vcxproj.filters
+	ren makedvcx.v10 djpeg.vcxproj
+	ren makedfil.v10 djpeg.vcxproj.filters
+	ren maketvcx.v10 jpegtran.vcxproj
+	ren maketfil.v10 jpegtran.vcxproj.filters
+	ren makervcx.v10 rdjpgcom.vcxproj
+	ren makerfil.v10 rdjpgcom.vcxproj.filters
+	ren makewvcx.v10 wrjpgcom.vcxproj
+	ren makewfil.v10 wrjpgcom.vcxproj.filters
+
+test:
+	IF EXIST testout* $(RM) testout*
+	.\djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+	.\djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+	.\cjpeg -dct int -outfile testout.jpg  testimg.ppm
+	.\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	.\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	.\jpegtran -outfile testoutt.jpg testprog.jpg
+	fc /b testimg.ppm testout.ppm
+	fc /b testimg.bmp testout.bmp
+	fc /b testimg.jpg testout.jpg
+	fc /b testimg.ppm testoutp.ppm
+	fc /b testimgp.jpg testoutp.jpg
+	fc /b testorig.jpg testoutt.jpg
+
+test-build:
+	IF EXIST testout* $(RM) testout*
+	.\djpeg\Release\djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+	.\djpeg\Release\djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+	.\cjpeg\Release\cjpeg -dct int -outfile testout.jpg  testimg.ppm
+	.\djpeg\Release\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	.\cjpeg\Release\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	.\jpegtran\Release\jpegtran -outfile testoutt.jpg testprog.jpg
+	fc /b testimg.ppm testout.ppm
+	fc /b testimg.bmp testout.bmp
+	fc /b testimg.jpg testout.jpg
+	fc /b testimg.ppm testoutp.ppm
+	fc /b testimgp.jpg testoutp.jpg
+	fc /b testorig.jpg testoutt.jpg
+
+
+jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
+jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
+rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
+wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
+cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
+rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/jpeg-8d/makefile.vms b/jpeg-8d/makefile.vms
new file mode 100644
index 0000000..a07d070
--- /dev/null
+++ b/jpeg-8d/makefile.vms
@@ -0,0 +1,142 @@
+$! Makefile for Independent JPEG Group's software
+$!
+$! This is a command procedure for Digital VMS systems that do not have MMS.
+$! It builds the JPEG software by brute force, recompiling everything whether
+$! or not it is necessary.  It then runs the basic self-test.
+$! Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu)
+$! and Tim Bell (tbell@netcom.com) for their help.
+$!
+$! Read installation instructions before running this!!
+$!
+$ If F$Mode () .eqs. "INTERACTIVE"
+$   Then
+$       VERIFY = F$Verify (0)
+$   Else
+$       VERIFY = F$Verify (1)
+$ EndIf
+$ On Control_Y Then GoTo End
+$ On Error     Then GoTo End
+$
+$ If F$GetSyi ("HW_MODEL") .gt. 1023 
+$   Then
+$       OPT = ""
+$   Else
+$       OPT = ",Sys$Disk:[]makvms.opt/Option"
+$ EndIf
+$ 
+$ DoCompile := CC /NoDebug /Optimize /NoList
+$!
+$ DoCompile jaricom.c
+$ DoCompile jcapimin.c
+$ DoCompile jcapistd.c
+$ DoCompile jcarith.c
+$ DoCompile jctrans.c
+$ DoCompile jcparam.c
+$ DoCompile jdatadst.c
+$ DoCompile jcinit.c
+$ DoCompile jcmaster.c
+$ DoCompile jcmarker.c
+$ DoCompile jcmainct.c
+$ DoCompile jcprepct.c
+$ DoCompile jccoefct.c
+$ DoCompile jccolor.c
+$ DoCompile jcsample.c
+$ DoCompile jchuff.c
+$ DoCompile jcdctmgr.c
+$ DoCompile jfdctfst.c
+$ DoCompile jfdctflt.c
+$ DoCompile jfdctint.c
+$ DoCompile jdapimin.c
+$ DoCompile jdapistd.c
+$ DoCompile jdarith.c
+$ DoCompile jdtrans.c
+$ DoCompile jdatasrc.c
+$ DoCompile jdmaster.c
+$ DoCompile jdinput.c
+$ DoCompile jdmarker.c
+$ DoCompile jdhuff.c
+$ DoCompile jdmainct.c
+$ DoCompile jdcoefct.c
+$ DoCompile jdpostct.c
+$ DoCompile jddctmgr.c
+$ DoCompile jidctfst.c
+$ DoCompile jidctflt.c
+$ DoCompile jidctint.c
+$ DoCompile jdsample.c
+$ DoCompile jdcolor.c
+$ DoCompile jquant1.c
+$ DoCompile jquant2.c
+$ DoCompile jdmerge.c
+$ DoCompile jcomapi.c
+$ DoCompile jutils.c
+$ DoCompile jerror.c
+$ DoCompile jmemmgr.c
+$ DoCompile jmemnobs.c
+$!
+$ Library /Create libjpeg.olb  jaricom.obj,jcapimin.obj,jcapistd.obj, -
+          jcarith.obj,jctrans.obj,jcparam.obj,jdatadst.obj,jcinit.obj, -
+          jcmaster.obj,jcmarker.obj,jcmainct.obj,jcprepct.obj,jccoefct.obj, -
+          jccolor.obj,jcsample.obj,jchuff.obj,jcdctmgr.obj,jfdctfst.obj, -
+          jfdctflt.obj,jfdctint.obj,jdapimin.obj,jdapistd.obj,jdarith.obj, -
+          jdtrans.obj,jdatasrc.obj,jdmaster.obj,jdinput.obj,jdmarker.obj, -
+          jdhuff.obj,jdmainct.obj,jdcoefct.obj,jdpostct.obj,jddctmgr.obj, -
+          jidctfst.obj,jidctflt.obj,jidctint.obj,jdsample.obj,jdcolor.obj, -
+          jquant1.obj,jquant2.obj,jdmerge.obj,jcomapi.obj,jutils.obj, -
+          jerror.obj,jmemmgr.obj,jmemnobs.obj
+$!
+$ DoCompile cjpeg.c
+$ DoCompile rdppm.c
+$ DoCompile rdgif.c
+$ DoCompile rdtarga.c
+$ DoCompile rdrle.c
+$ DoCompile rdbmp.c
+$ DoCompile rdswitch.c
+$ DoCompile cdjpeg.c
+$!
+$ Link /NoMap /Executable = cjpeg.exe  cjpeg.obj,rdppm.obj,rdgif.obj, -
+          rdtarga.obj,rdrle.obj,rdbmp.obj,rdswitch.obj,cdjpeg.obj,libjpeg.olb/Library'OPT'
+$!
+$ DoCompile djpeg.c
+$ DoCompile wrppm.c
+$ DoCompile wrgif.c
+$ DoCompile wrtarga.c
+$ DoCompile wrrle.c
+$ DoCompile wrbmp.c
+$ DoCompile rdcolmap.c
+$ DoCompile cdjpeg.c
+$!
+$ Link /NoMap /Executable = djpeg.exe  djpeg.obj,wrppm.obj,wrgif.obj, -
+          wrtarga.obj,wrrle.obj,wrbmp.obj,rdcolmap.obj,cdjpeg.obj,libjpeg.olb/Library'OPT'
+$!
+$ DoCompile jpegtran.c
+$ DoCompile rdswitch.c
+$ DoCompile cdjpeg.c
+$ DoCompile transupp.c
+$!
+$ Link /NoMap /Executable = jpegtran.exe  jpegtran.obj,rdswitch.obj, -
+          cdjpeg.obj,transupp.obj,libjpeg.olb/Library'OPT'
+$!
+$ DoCompile rdjpgcom.c
+$ Link /NoMap /Executable = rdjpgcom.exe  rdjpgcom.obj'OPT'
+$!
+$ DoCompile wrjpgcom.c
+$ Link /NoMap /Executable = wrjpgcom.exe  wrjpgcom.obj'OPT'
+$!
+$! Run the self-test
+$!
+$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
+$ mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
+$ mcr sys$disk:[]cjpeg -dct int      -outfile testout.jpg testimg.ppm
+$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+$ mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+$ mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg
+$ Backup /Compare/Log testimg.ppm testout.ppm
+$ Backup /Compare/Log testimg.bmp testout.bmp
+$ Backup /Compare/Log testimg.jpg testout.jpg
+$ Backup /Compare/Log testimg.ppm testoutp.ppm
+$ Backup /Compare/Log testimgp.jpg testoutp.jpg
+$ Backup /Compare/Log testorig.jpg testoutt.jpg
+$!
+$End:
+$   If Verify Then Set Verify
+$ Exit
diff --git a/jpeg-8d/makefile.wat b/jpeg-8d/makefile.wat
new file mode 100644
index 0000000..a3e652b
--- /dev/null
+++ b/jpeg-8d/makefile.wat
@@ -0,0 +1,240 @@
+# Makefile for Independent JPEG Group's software
+
+# This makefile is suitable for Watcom C/C++ 10.0 on MS-DOS (using
+# dos4g extender), OS/2, and Windows NT console mode.
+# Thanks to Janos Haide, jhaide@btrvtech.com.
+
+# Read installation instructions before saying "wmake" !!
+
+# Uncomment line for desired system
+SYSTEM=DOS
+#SYSTEM=OS2
+#SYSTEM=NT
+
+# The name of your C compiler:
+CC= wcl386
+
+# You may need to adjust these cc options:
+CFLAGS= -4r -ort -wx -zq -bt=$(SYSTEM)
+# Caution: avoid -ol or -ox; these generate bad code with 10.0 or 10.0a.
+# Generally, we recommend defining any configuration symbols in jconfig.h,
+# NOT via -D switches here.
+
+# Link-time cc options:
+!ifeq SYSTEM DOS
+LDFLAGS= -zq -l=dos4g
+!else ifeq SYSTEM OS2
+LDFLAGS= -zq -l=os2v2
+!else ifeq SYSTEM NT
+LDFLAGS= -zq -l=nt
+!endif
+
+# Put here the object file name for the correct system-dependent memory
+# manager file.  jmemnobs should work fine for dos4g or OS/2 environment.
+SYSDEPMEM= jmemnobs.obj
+
+# End of configurable options.
+
+
+# source files: JPEG library proper
+LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c &
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c &
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c &
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c &
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c &
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c &
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c &
+        jquant2.c jutils.c jmemmgr.c
+# memmgr back ends: compile only one of these into a working library
+SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
+APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c &
+        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c &
+        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
+SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
+# files included by source files
+INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h &
+        jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
+# documentation, test, and support files
+DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 &
+        wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt &
+        coderules.txt filelist.txt change.log
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc &
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 &
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 &
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 &
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 &
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 &
+        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 &
+        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 &
+        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st &
+        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas &
+        makefile.mms makefile.vms makvms.opt
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat &
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas &
+        jconfig.vms
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm &
+        libjpeg.map
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg &
+        testimgp.jpg
+DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) &
+        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
+# library object files common to compression and decompression
+COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
+# compression library object files
+CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj &
+        jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj &
+        jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj &
+        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
+# decompression library object files
+DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj &
+        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj &
+        jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj &
+        jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj &
+        jdmerge.obj
+# These objectfiles are included in libjpeg.lib
+LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
+# object files for sample applications (excluding library files)
+COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj &
+        rdswitch.obj cdjpeg.obj
+DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj &
+        rdcolmap.obj cdjpeg.obj
+TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
+
+
+all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
+
+libjpeg.lib: $(LIBOBJECTS)
+	- del libjpeg.lib
+	* wlib -n libjpeg.lib $(LIBOBJECTS)
+
+cjpeg.exe: $(COBJECTS) libjpeg.lib
+	$(CC) $(LDFLAGS) $(COBJECTS) libjpeg.lib
+
+djpeg.exe: $(DOBJECTS) libjpeg.lib
+	$(CC) $(LDFLAGS) $(DOBJECTS) libjpeg.lib
+
+jpegtran.exe: $(TROBJECTS) libjpeg.lib
+	$(CC) $(LDFLAGS) $(TROBJECTS) libjpeg.lib
+
+rdjpgcom.exe: rdjpgcom.c
+	$(CC) $(CFLAGS) $(LDFLAGS) rdjpgcom.c
+
+wrjpgcom.exe: wrjpgcom.c
+	$(CC) $(CFLAGS) $(LDFLAGS) wrjpgcom.c
+
+.c.obj:
+	$(CC) $(CFLAGS) -c $<
+
+jconfig.h: jconfig.txt
+	echo You must prepare a system-dependent jconfig.h file.
+	echo Please read the installation directions in install.txt.
+	exit 1
+
+clean: .SYMBOLIC
+	- del *.obj
+	- del libjpeg.lib
+	- del cjpeg.exe
+	- del djpeg.exe
+	- del jpegtran.exe
+	- del rdjpgcom.exe
+	- del wrjpgcom.exe
+	- del testout*.*
+
+test: cjpeg.exe djpeg.exe jpegtran.exe  .SYMBOLIC
+	- del testout*.*
+	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+	djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+	cjpeg -dct int -outfile testout.jpg  testimg.ppm
+	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	jpegtran -outfile testoutt.jpg testprog.jpg
+!ifeq SYSTEM DOS
+	fc /b testimg.ppm testout.ppm
+	fc /b testimg.bmp testout.bmp
+	fc /b testimg.jpg testout.jpg
+	fc /b testimg.ppm testoutp.ppm
+	fc /b testimgp.jpg testoutp.jpg
+	fc /b testorig.jpg testoutt.jpg
+!else
+	echo n > n.tmp
+	comp testimg.ppm testout.ppm < n.tmp
+	comp testimg.bmp testout.bmp < n.tmp
+	comp testimg.jpg testout.jpg < n.tmp
+	comp testimg.ppm testoutp.ppm < n.tmp
+	comp testimgp.jpg testoutp.jpg < n.tmp
+	comp testorig.jpg testoutt.jpg < n.tmp
+	del n.tmp
+!endif
+
+
+jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
+jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
+rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
+wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
+cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
+rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
diff --git a/jpeg-8d/makejdep.vc6 b/jpeg-8d/makejdep.vc6
new file mode 100644
index 0000000..1065b21
--- /dev/null
+++ b/jpeg-8d/makejdep.vc6
@@ -0,0 +1,423 @@
+# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von jpeg.mak
+
+.\jaricom.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jcapimin.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jcapistd.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jcarith.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jccoefct.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jccolor.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jcdctmgr.c : \
+	".\jconfig.h"\
+	".\jdct.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jchuff.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jcinit.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jcmainct.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jcmarker.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jcmaster.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jcomapi.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jcparam.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jcprepct.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jcsample.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jctrans.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdapimin.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdapistd.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdarith.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdatadst.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\jdatasrc.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\jdcoefct.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdcolor.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jddctmgr.c : \
+	".\jconfig.h"\
+	".\jdct.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdhuff.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdinput.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdmainct.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdmarker.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdmaster.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdmerge.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdpostct.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdsample.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jdtrans.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jerror.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	".\jversion.h"\
+	
+
+.\jfdctflt.c : \
+	".\jconfig.h"\
+	".\jdct.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jfdctfst.c : \
+	".\jconfig.h"\
+	".\jdct.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jfdctint.c : \
+	".\jconfig.h"\
+	".\jdct.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jidctflt.c : \
+	".\jconfig.h"\
+	".\jdct.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jidctfst.c : \
+	".\jconfig.h"\
+	".\jdct.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jidctint.c : \
+	".\jconfig.h"\
+	".\jdct.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jmemmgr.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmemsys.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jmemnobs.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmemsys.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jquant1.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jquant2.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
+
+.\jutils.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	
diff --git a/jpeg-8d/makejdsp.vc6 b/jpeg-8d/makejdsp.vc6
new file mode 100644
index 0000000..738f1ab
--- /dev/null
+++ b/jpeg-8d/makejdsp.vc6
@@ -0,0 +1,285 @@
+# Microsoft Developer Studio Project File - Name="jpeg" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** NICHT BEARBEITEN **
+
+# TARGTYPE "Win32 (x86) Static Library" 0x0104
+
+CFG=jpeg - Win32
+!MESSAGE Dies ist kein g�ltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE
+!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und f�hren Sie den Befehl
+!MESSAGE 
+!MESSAGE NMAKE /f "jpeg.mak".
+!MESSAGE 
+!MESSAGE Sie k÷nnen beim Ausf�hren von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32"
+!MESSAGE 
+!MESSAGE F�r die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "jpeg - Win32" (basierend auf  "Win32 (x86) Static Library")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir ".\Release"
+# PROP BASE Intermediate_Dir ".\Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir ".\Release"
+# PROP Intermediate_Dir ".\Release"
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c
+# ADD BASE RSC /l 0x407
+# ADD RSC /l 0x407
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+# Begin Target
+
+# Name "jpeg - Win32"
+# Begin Group "Quellcodedateien"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90"
+# Begin Source File
+
+SOURCE=.\jaricom.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jcapimin.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jcapistd.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jcarith.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jccoefct.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jccolor.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jcdctmgr.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jchuff.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jcinit.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jcmainct.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jcmarker.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jcmaster.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jcomapi.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jcparam.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jcprepct.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jcsample.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jctrans.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdapimin.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdapistd.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdarith.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdatadst.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdatasrc.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdcoefct.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdcolor.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jddctmgr.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdhuff.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdinput.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdmainct.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdmarker.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdmaster.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdmerge.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdpostct.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdsample.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdtrans.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jerror.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jfdctflt.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jfdctfst.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jfdctint.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jidctflt.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jidctfst.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jidctint.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jmemmgr.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jmemnobs.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jquant1.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jquant2.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jutils.c
+# End Source File
+# End Group
+# Begin Group "Header-Dateien"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
+# Begin Source File
+
+SOURCE=.\jconfig.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jdct.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jerror.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jinclude.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jmemsys.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jmorecfg.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jpegint.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jpeglib.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jversion.h
+# End Source File
+# End Group
+# Begin Group "Ressourcendateien"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project
diff --git a/jpeg-8d/makejdsw.vc6 b/jpeg-8d/makejdsw.vc6
new file mode 100644
index 0000000..d11fab1
--- /dev/null
+++ b/jpeg-8d/makejdsw.vc6
@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GEL™SCHT WERDEN!
+
+###############################################################################
+
+Project: "jpeg"=".\jpeg.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+
diff --git a/jpeg-8d/makejfil.v10 b/jpeg-8d/makejfil.v10
new file mode 100644
index 0000000..654bfc0
--- /dev/null
+++ b/jpeg-8d/makejfil.v10
@@ -0,0 +1,186 @@
+‹¯¨<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="jconfig.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jdct.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jerror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jinclude.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jmemsys.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jmorecfg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jpegint.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jpeglib.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jversion.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="jaricom.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcapimin.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcapistd.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcarith.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jccoefct.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jccolor.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcdctmgr.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jchuff.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcinit.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcmainct.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcmarker.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcmaster.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcomapi.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcparam.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcprepct.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcsample.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jctrans.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdapimin.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdapistd.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdarith.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdatadst.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdatasrc.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdcoefct.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdcolor.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jddctmgr.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdhuff.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdinput.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdmainct.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdmarker.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdmaster.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdmerge.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdpostct.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdsample.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdtrans.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jerror.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jfdctflt.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jfdctfst.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jfdctint.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jidctflt.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jidctfst.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jidctint.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jmemmgr.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jmemnobs.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jquant1.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jquant2.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jutils.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>
\ No newline at end of file
diff --git a/jpeg-8d/makejmak.vc6 b/jpeg-8d/makejmak.vc6
new file mode 100644
index 0000000..1107336
--- /dev/null
+++ b/jpeg-8d/makejmak.vc6
@@ -0,0 +1,425 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on jpeg.dsp
+!IF "$(CFG)" == ""
+CFG=jpeg - Win32
+!MESSAGE Keine Konfiguration angegeben. jpeg - Win32 wird als Standard verwendet.
+!ENDIF 
+
+!IF "$(CFG)" != "jpeg - Win32"
+!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben.
+!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32"
+!MESSAGE 
+!MESSAGE Für die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "jpeg - Win32" (basierend auf  "Win32 (x86) Static Library")
+!MESSAGE 
+!ERROR Eine ungültige Konfiguration wurde angegeben.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+OUTDIR=.\Release
+INTDIR=.\Release
+# Begin Custom Macros
+OutDir=.\Release
+# End Custom Macros
+
+ALL : "$(OUTDIR)\jpeg.lib"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\jaricom.obj"
+	-@erase "$(INTDIR)\jcapimin.obj"
+	-@erase "$(INTDIR)\jcapistd.obj"
+	-@erase "$(INTDIR)\jcarith.obj"
+	-@erase "$(INTDIR)\jccoefct.obj"
+	-@erase "$(INTDIR)\jccolor.obj"
+	-@erase "$(INTDIR)\jcdctmgr.obj"
+	-@erase "$(INTDIR)\jchuff.obj"
+	-@erase "$(INTDIR)\jcinit.obj"
+	-@erase "$(INTDIR)\jcmainct.obj"
+	-@erase "$(INTDIR)\jcmarker.obj"
+	-@erase "$(INTDIR)\jcmaster.obj"
+	-@erase "$(INTDIR)\jcomapi.obj"
+	-@erase "$(INTDIR)\jcparam.obj"
+	-@erase "$(INTDIR)\jcprepct.obj"
+	-@erase "$(INTDIR)\jcsample.obj"
+	-@erase "$(INTDIR)\jctrans.obj"
+	-@erase "$(INTDIR)\jdapimin.obj"
+	-@erase "$(INTDIR)\jdapistd.obj"
+	-@erase "$(INTDIR)\jdarith.obj"
+	-@erase "$(INTDIR)\jdatadst.obj"
+	-@erase "$(INTDIR)\jdatasrc.obj"
+	-@erase "$(INTDIR)\jdcoefct.obj"
+	-@erase "$(INTDIR)\jdcolor.obj"
+	-@erase "$(INTDIR)\jddctmgr.obj"
+	-@erase "$(INTDIR)\jdhuff.obj"
+	-@erase "$(INTDIR)\jdinput.obj"
+	-@erase "$(INTDIR)\jdmainct.obj"
+	-@erase "$(INTDIR)\jdmarker.obj"
+	-@erase "$(INTDIR)\jdmaster.obj"
+	-@erase "$(INTDIR)\jdmerge.obj"
+	-@erase "$(INTDIR)\jdpostct.obj"
+	-@erase "$(INTDIR)\jdsample.obj"
+	-@erase "$(INTDIR)\jdtrans.obj"
+	-@erase "$(INTDIR)\jerror.obj"
+	-@erase "$(INTDIR)\jfdctflt.obj"
+	-@erase "$(INTDIR)\jfdctfst.obj"
+	-@erase "$(INTDIR)\jfdctint.obj"
+	-@erase "$(INTDIR)\jidctflt.obj"
+	-@erase "$(INTDIR)\jidctfst.obj"
+	-@erase "$(INTDIR)\jidctint.obj"
+	-@erase "$(INTDIR)\jmemmgr.obj"
+	-@erase "$(INTDIR)\jmemnobs.obj"
+	-@erase "$(INTDIR)\jquant1.obj"
+	-@erase "$(INTDIR)\jquant2.obj"
+	-@erase "$(INTDIR)\jutils.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(OUTDIR)\jpeg.lib"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+CPP=cl.exe
+CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /Fp"$(INTDIR)\jpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+RSC=rc.exe
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\jpeg.bsc" 
+BSC32_SBRS= \
+	
+LIB32=link.exe -lib
+LIB32_FLAGS=/nologo /out:"$(OUTDIR)\jpeg.lib" 
+LIB32_OBJS= \
+	"$(INTDIR)\jaricom.obj" \
+	"$(INTDIR)\jcapimin.obj" \
+	"$(INTDIR)\jcapistd.obj" \
+	"$(INTDIR)\jcarith.obj" \
+	"$(INTDIR)\jccoefct.obj" \
+	"$(INTDIR)\jccolor.obj" \
+	"$(INTDIR)\jcdctmgr.obj" \
+	"$(INTDIR)\jchuff.obj" \
+	"$(INTDIR)\jcinit.obj" \
+	"$(INTDIR)\jcmainct.obj" \
+	"$(INTDIR)\jcmarker.obj" \
+	"$(INTDIR)\jcmaster.obj" \
+	"$(INTDIR)\jcomapi.obj" \
+	"$(INTDIR)\jcparam.obj" \
+	"$(INTDIR)\jcprepct.obj" \
+	"$(INTDIR)\jcsample.obj" \
+	"$(INTDIR)\jctrans.obj" \
+	"$(INTDIR)\jdapimin.obj" \
+	"$(INTDIR)\jdapistd.obj" \
+	"$(INTDIR)\jdarith.obj" \
+	"$(INTDIR)\jdatadst.obj" \
+	"$(INTDIR)\jdatasrc.obj" \
+	"$(INTDIR)\jdcoefct.obj" \
+	"$(INTDIR)\jdcolor.obj" \
+	"$(INTDIR)\jddctmgr.obj" \
+	"$(INTDIR)\jdhuff.obj" \
+	"$(INTDIR)\jdinput.obj" \
+	"$(INTDIR)\jdmainct.obj" \
+	"$(INTDIR)\jdmarker.obj" \
+	"$(INTDIR)\jdmaster.obj" \
+	"$(INTDIR)\jdmerge.obj" \
+	"$(INTDIR)\jdpostct.obj" \
+	"$(INTDIR)\jdsample.obj" \
+	"$(INTDIR)\jdtrans.obj" \
+	"$(INTDIR)\jerror.obj" \
+	"$(INTDIR)\jfdctflt.obj" \
+	"$(INTDIR)\jfdctfst.obj" \
+	"$(INTDIR)\jfdctint.obj" \
+	"$(INTDIR)\jidctflt.obj" \
+	"$(INTDIR)\jidctfst.obj" \
+	"$(INTDIR)\jidctint.obj" \
+	"$(INTDIR)\jmemmgr.obj" \
+	"$(INTDIR)\jmemnobs.obj" \
+	"$(INTDIR)\jquant1.obj" \
+	"$(INTDIR)\jquant2.obj" \
+	"$(INTDIR)\jutils.obj"
+
+"$(OUTDIR)\jpeg.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS)
+    $(LIB32) @<<
+  $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS)
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("jpeg.dep")
+!INCLUDE "jpeg.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "jpeg.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "jpeg - Win32"
+SOURCE=.\jaricom.c
+
+"$(INTDIR)\jaricom.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jcapimin.c
+
+"$(INTDIR)\jcapimin.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jcapistd.c
+
+"$(INTDIR)\jcapistd.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jcarith.c
+
+"$(INTDIR)\jcarith.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jccoefct.c
+
+"$(INTDIR)\jccoefct.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jccolor.c
+
+"$(INTDIR)\jccolor.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jcdctmgr.c
+
+"$(INTDIR)\jcdctmgr.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jchuff.c
+
+"$(INTDIR)\jchuff.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jcinit.c
+
+"$(INTDIR)\jcinit.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jcmainct.c
+
+"$(INTDIR)\jcmainct.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jcmarker.c
+
+"$(INTDIR)\jcmarker.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jcmaster.c
+
+"$(INTDIR)\jcmaster.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jcomapi.c
+
+"$(INTDIR)\jcomapi.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jcparam.c
+
+"$(INTDIR)\jcparam.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jcprepct.c
+
+"$(INTDIR)\jcprepct.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jcsample.c
+
+"$(INTDIR)\jcsample.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jctrans.c
+
+"$(INTDIR)\jctrans.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdapimin.c
+
+"$(INTDIR)\jdapimin.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdapistd.c
+
+"$(INTDIR)\jdapistd.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdarith.c
+
+"$(INTDIR)\jdarith.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdatadst.c
+
+"$(INTDIR)\jdatadst.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdatasrc.c
+
+"$(INTDIR)\jdatasrc.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdcoefct.c
+
+"$(INTDIR)\jdcoefct.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdcolor.c
+
+"$(INTDIR)\jdcolor.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jddctmgr.c
+
+"$(INTDIR)\jddctmgr.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdhuff.c
+
+"$(INTDIR)\jdhuff.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdinput.c
+
+"$(INTDIR)\jdinput.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdmainct.c
+
+"$(INTDIR)\jdmainct.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdmarker.c
+
+"$(INTDIR)\jdmarker.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdmaster.c
+
+"$(INTDIR)\jdmaster.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdmerge.c
+
+"$(INTDIR)\jdmerge.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdpostct.c
+
+"$(INTDIR)\jdpostct.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdsample.c
+
+"$(INTDIR)\jdsample.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jdtrans.c
+
+"$(INTDIR)\jdtrans.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jerror.c
+
+"$(INTDIR)\jerror.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jfdctflt.c
+
+"$(INTDIR)\jfdctflt.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jfdctfst.c
+
+"$(INTDIR)\jfdctfst.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jfdctint.c
+
+"$(INTDIR)\jfdctint.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jidctflt.c
+
+"$(INTDIR)\jidctflt.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jidctfst.c
+
+"$(INTDIR)\jidctfst.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jidctint.c
+
+"$(INTDIR)\jidctint.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jmemmgr.c
+
+"$(INTDIR)\jmemmgr.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jmemnobs.c
+
+"$(INTDIR)\jmemnobs.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jquant1.c
+
+"$(INTDIR)\jquant1.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jquant2.c
+
+"$(INTDIR)\jquant2.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jutils.c
+
+"$(INTDIR)\jutils.obj" : $(SOURCE) "$(INTDIR)"
+
+
+
+!ENDIF 
+
diff --git a/jpeg-8d/makejsln.v10 b/jpeg-8d/makejsln.v10
new file mode 100644
index 0000000..6a5befd
--- /dev/null
+++ b/jpeg-8d/makejsln.v10
@@ -0,0 +1,17 @@
+‹¯¨
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Visual C++ Express 2010
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpeg", "jpeg.vcxproj", "{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Release|Win32 = Release|Win32
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.ActiveCfg = Release|Win32
+		{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.Build.0 = Release|Win32
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal
diff --git a/jpeg-8d/makejvcx.v10 b/jpeg-8d/makejvcx.v10
new file mode 100644
index 0000000..ccee287
--- /dev/null
+++ b/jpeg-8d/makejvcx.v10
@@ -0,0 +1,112 @@
+‹¯¨<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="jconfig.h" />
+    <ClInclude Include="jdct.h" />
+    <ClInclude Include="jerror.h" />
+    <ClInclude Include="jinclude.h" />
+    <ClInclude Include="jmemsys.h" />
+    <ClInclude Include="jmorecfg.h" />
+    <ClInclude Include="jpegint.h" />
+    <ClInclude Include="jpeglib.h" />
+    <ClInclude Include="jversion.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="jaricom.c" />
+    <ClCompile Include="jcapimin.c" />
+    <ClCompile Include="jcapistd.c" />
+    <ClCompile Include="jcarith.c" />
+    <ClCompile Include="jccoefct.c" />
+    <ClCompile Include="jccolor.c" />
+    <ClCompile Include="jcdctmgr.c" />
+    <ClCompile Include="jchuff.c" />
+    <ClCompile Include="jcinit.c" />
+    <ClCompile Include="jcmainct.c" />
+    <ClCompile Include="jcmarker.c" />
+    <ClCompile Include="jcmaster.c" />
+    <ClCompile Include="jcomapi.c" />
+    <ClCompile Include="jcparam.c" />
+    <ClCompile Include="jcprepct.c" />
+    <ClCompile Include="jcsample.c" />
+    <ClCompile Include="jctrans.c" />
+    <ClCompile Include="jdapimin.c" />
+    <ClCompile Include="jdapistd.c" />
+    <ClCompile Include="jdarith.c" />
+    <ClCompile Include="jdatadst.c" />
+    <ClCompile Include="jdatasrc.c" />
+    <ClCompile Include="jdcoefct.c" />
+    <ClCompile Include="jdcolor.c" />
+    <ClCompile Include="jddctmgr.c" />
+    <ClCompile Include="jdhuff.c" />
+    <ClCompile Include="jdinput.c" />
+    <ClCompile Include="jdmainct.c" />
+    <ClCompile Include="jdmarker.c" />
+    <ClCompile Include="jdmaster.c" />
+    <ClCompile Include="jdmerge.c" />
+    <ClCompile Include="jdpostct.c" />
+    <ClCompile Include="jdsample.c" />
+    <ClCompile Include="jdtrans.c" />
+    <ClCompile Include="jerror.c" />
+    <ClCompile Include="jfdctflt.c" />
+    <ClCompile Include="jfdctfst.c" />
+    <ClCompile Include="jfdctint.c" />
+    <ClCompile Include="jidctflt.c" />
+    <ClCompile Include="jidctfst.c" />
+    <ClCompile Include="jidctint.c" />
+    <ClCompile Include="jmemmgr.c" />
+    <ClCompile Include="jmemnobs.c" />
+    <ClCompile Include="jquant1.c" />
+    <ClCompile Include="jquant2.c">
+      <Optimization Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">Disabled</Optimization>
+      <BufferSecurityCheck Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</BufferSecurityCheck>
+    </ClCompile>
+    <ClCompile Include="jutils.c" />
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>jpeg</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup />
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>NotUsing</PrecompiledHeader>
+      <Optimization>Full</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;_CRT_SECURE_NO_WARNINGS</PreprocessorDefinitions>
+      <OmitFramePointers>true</OmitFramePointers>
+      <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
+    </ClCompile>
+    <Link>
+      <SubSystem>Windows</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+    </Link>
+  </ItemDefinitionGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>
\ No newline at end of file
diff --git a/jpeg-8d/makeproj.mac b/jpeg-8d/makeproj.mac
new file mode 100644
index 0000000..e5b5102
--- /dev/null
+++ b/jpeg-8d/makeproj.mac
@@ -0,0 +1,213 @@
+--
+-- makeproj.mac
+--
+-- This AppleScript builds Code Warrior PRO Release 2 project files for the
+-- libjpeg library as well as the test programs 'cjpeg', 'djpeg', 'jpegtran'.
+-- (We'd distribute real project files, except they're not text
+-- and would create maintenance headaches.)
+--
+-- The script then compiles and links the library and the test programs.
+-- NOTE: if you haven't already created a 'jconfig.h' file, the script
+-- automatically copies 'jconfig.mac' to 'jconfig.h'.
+--
+-- To use this script, you must have AppleScript 1.1 or later installed
+-- and a suitable AppleScript editor like Script Editor or Script Debugger
+-- (http://www.latenightsw.com). Open this file with your AppleScript
+-- editor and execute the "run" command to build the projects.
+--
+-- Thanks to Dan Sears and Don Agro for this script.
+-- Questions about this script can be addressed to dogpark@interlog.com
+--
+
+on run
+
+	choose folder with prompt ">>> Select IJG source folder <<<"
+	set ijg_folder to result
+
+	choose folder with prompt ">>> Select MetroWerks folder <<<"
+	set cw_folder to result
+
+	-- if jconfig.h doesn't already exist, copy jconfig.mac
+
+	tell application "Finder"
+		if not (exists file "jconfig.h" of ijg_folder) then
+			duplicate {file "jconfig.mac" of folder ijg_folder}
+			select file "jconfig.mac copy" of folder ijg_folder
+			set name of selection to "jconfig.h"
+		end if
+	end tell
+
+	tell application "CodeWarrior IDE 2.1"
+	  with timeout of 10000 seconds
+
+		-- create libjpeg project
+
+		activate
+		Create Project (ijg_folder as string) & "libjpeg.proj"
+		Set Preferences of panel "Target Settings" to {Target Name:"libjpeg"}
+		Set Preferences of panel "PPC Project" to {File Name:"libjpeg"}
+		Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"}
+		Set Preferences of panel "PPC Project" to {Project Type:library}
+		Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true}
+		Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true}
+		Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC}
+		Set Preferences of panel "PPC Linker" to {Generate SYM File:false}
+
+		Add Files (ijg_folder as string) & "jaricom.c" To Segment 1
+		Add Files (ijg_folder as string) & "jcapimin.c" To Segment 1
+		Add Files (ijg_folder as string) & "jcapistd.c" To Segment 1
+		Add Files (ijg_folder as string) & "jcarith.c" To Segment 1
+		Add Files (ijg_folder as string) & "jctrans.c" To Segment 1
+		Add Files (ijg_folder as string) & "jcparam.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdatadst.c" To Segment 1
+		Add Files (ijg_folder as string) & "jcinit.c" To Segment 1
+		Add Files (ijg_folder as string) & "jcmaster.c" To Segment 1
+		Add Files (ijg_folder as string) & "jcmarker.c" To Segment 1
+		Add Files (ijg_folder as string) & "jcmainct.c" To Segment 1
+		Add Files (ijg_folder as string) & "jcprepct.c" To Segment 1
+		Add Files (ijg_folder as string) & "jccoefct.c" To Segment 1
+		Add Files (ijg_folder as string) & "jccolor.c" To Segment 1
+		Add Files (ijg_folder as string) & "jcsample.c" To Segment 1
+		Add Files (ijg_folder as string) & "jchuff.c" To Segment 1
+		Add Files (ijg_folder as string) & "jcdctmgr.c" To Segment 1
+		Add Files (ijg_folder as string) & "jfdctfst.c" To Segment 1
+		Add Files (ijg_folder as string) & "jfdctflt.c" To Segment 1
+		Add Files (ijg_folder as string) & "jfdctint.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdapimin.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdapistd.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdarith.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdtrans.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdatasrc.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdmaster.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdinput.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdmarker.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdhuff.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdmainct.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdcoefct.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdpostct.c" To Segment 1
+		Add Files (ijg_folder as string) & "jddctmgr.c" To Segment 1
+		Add Files (ijg_folder as string) & "jidctfst.c" To Segment 1
+		Add Files (ijg_folder as string) & "jidctflt.c" To Segment 1
+		Add Files (ijg_folder as string) & "jidctint.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdsample.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdcolor.c" To Segment 1
+		Add Files (ijg_folder as string) & "jquant1.c" To Segment 1
+		Add Files (ijg_folder as string) & "jquant2.c" To Segment 1
+		Add Files (ijg_folder as string) & "jdmerge.c" To Segment 1
+		Add Files (ijg_folder as string) & "jcomapi.c" To Segment 1
+		Add Files (ijg_folder as string) & "jutils.c" To Segment 1
+		Add Files (ijg_folder as string) & "jerror.c" To Segment 1
+		Add Files (ijg_folder as string) & "jmemmgr.c" To Segment 1
+		Add Files (ijg_folder as string) & "jmemmac.c" To Segment 1
+
+		-- compile and link the library
+
+		Make Project
+		Close Project
+
+		-- create cjpeg project
+
+		activate
+		Create Project (ijg_folder as string) & "cjpeg.proj"
+		Set Preferences of panel "Target Settings" to {Target Name:"cjpeg"}
+		Set Preferences of panel "PPC Project" to {File Name:"cjpeg"}
+		Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"}
+		Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true}
+		Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true}
+		Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC}
+		Set Preferences of panel "PPC Linker" to {Generate SYM File:false}
+
+		Add Files (ijg_folder as string) & "cjpeg.c" To Segment 1
+		Add Files (ijg_folder as string) & "rdppm.c" To Segment 1
+		Add Files (ijg_folder as string) & "rdgif.c" To Segment 1
+		Add Files (ijg_folder as string) & "rdtarga.c" To Segment 1
+		Add Files (ijg_folder as string) & "rdrle.c" To Segment 1
+		Add Files (ijg_folder as string) & "rdbmp.c" To Segment 1
+		Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1
+		Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1
+
+		Add Files (ijg_folder as string) & "libjpeg" To Segment 2
+
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3
+
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4
+
+		-- compile and link cjpeg
+
+		Make Project
+		Close Project
+
+		-- create djpeg project
+
+		activate
+		Create Project (ijg_folder as string) & "djpeg.proj"
+		Set Preferences of panel "Target Settings" to {Target Name:"djpeg"}
+		Set Preferences of panel "PPC Project" to {File Name:"djpeg"}
+		Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"}
+		Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true}
+		Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true}
+		Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC}
+		Set Preferences of panel "PPC Linker" to {Generate SYM File:false}
+
+		Add Files (ijg_folder as string) & "djpeg.c" To Segment 1
+		Add Files (ijg_folder as string) & "wrppm.c" To Segment 1
+		Add Files (ijg_folder as string) & "wrgif.c" To Segment 1
+		Add Files (ijg_folder as string) & "wrtarga.c" To Segment 1
+		Add Files (ijg_folder as string) & "wrrle.c" To Segment 1
+		Add Files (ijg_folder as string) & "wrbmp.c" To Segment 1
+		Add Files (ijg_folder as string) & "rdcolmap.c" To Segment 1
+		Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1
+
+		Add Files (ijg_folder as string) & "libjpeg" To Segment 2
+
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3
+
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4
+
+		-- compile and link djpeg
+
+		Make Project
+		Close Project
+
+		-- create jpegtran project
+
+		activate
+		Create Project (ijg_folder as string) & "jpegtran.proj"
+		Set Preferences of panel "Target Settings" to {Target Name:"jpegtran"}
+		Set Preferences of panel "PPC Project" to {File Name:"jpegtran"}
+		Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"}
+		Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true}
+		Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true}
+		Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC}
+		Set Preferences of panel "PPC Linker" to {Generate SYM File:false}
+
+		Add Files (ijg_folder as string) & "jpegtran.c" To Segment 1
+		Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1
+		Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1
+		Add Files (ijg_folder as string) & "transupp.c" To Segment 1
+
+		Add Files (ijg_folder as string) & "libjpeg" To Segment 2
+
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3
+
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4
+		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4
+
+		-- compile and link jpegtran
+
+		Make Project
+		Close Project
+
+		quit
+
+	  end timeout
+	end tell
+end run
diff --git a/jpeg-8d/makerdep.vc6 b/jpeg-8d/makerdep.vc6
new file mode 100644
index 0000000..94748d0
--- /dev/null
+++ b/jpeg-8d/makerdep.vc6
@@ -0,0 +1,6 @@
+# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von rdjpgcom.mak
+
+.\rdjpgcom.c : \
+	".\jconfig.h"\
+	".\jinclude.h"\
+	
diff --git a/jpeg-8d/makerdsp.vc6 b/jpeg-8d/makerdsp.vc6
new file mode 100644
index 0000000..60de09a
--- /dev/null
+++ b/jpeg-8d/makerdsp.vc6
@@ -0,0 +1,78 @@
+# Microsoft Developer Studio Project File - Name="rdjpgcom" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** NICHT BEARBEITEN **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=rdjpgcom - Win32
+!MESSAGE Dies ist kein g�ltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE
+!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und f�hren Sie den Befehl
+!MESSAGE 
+!MESSAGE NMAKE /f "rdjpgcom.mak".
+!MESSAGE 
+!MESSAGE Sie k÷nnen beim Ausf�hren von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "rdjpgcom.mak" CFG="rdjpgcom - Win32"
+!MESSAGE 
+!MESSAGE F�r die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "rdjpgcom - Win32" (basierend auf  "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir ".\rdjpgcom\Release"
+# PROP BASE Intermediate_Dir ".\rdjpgcom\Release"
+# PROP BASE Target_Dir ".\rdjpgcom"
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir ".\rdjpgcom\Release"
+# PROP Intermediate_Dir ".\rdjpgcom\Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ".\rdjpgcom"
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
+# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# Begin Target
+
+# Name "rdjpgcom - Win32"
+# Begin Group "Quellcodedateien"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90"
+# Begin Source File
+
+SOURCE=.\rdjpgcom.c
+# End Source File
+# End Group
+# Begin Group "Header-Dateien"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
+# Begin Source File
+
+SOURCE=.\jconfig.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jinclude.h
+# End Source File
+# End Group
+# Begin Group "Ressourcendateien"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project
diff --git a/jpeg-8d/makerfil.v10 b/jpeg-8d/makerfil.v10
new file mode 100644
index 0000000..d14914a
--- /dev/null
+++ b/jpeg-8d/makerfil.v10
@@ -0,0 +1,30 @@
+‹¯¨<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="jconfig.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jinclude.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="rdjpgcom.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>
\ No newline at end of file
diff --git a/jpeg-8d/makermak.vc6 b/jpeg-8d/makermak.vc6
new file mode 100644
index 0000000..6d2d4c7
--- /dev/null
+++ b/jpeg-8d/makermak.vc6
@@ -0,0 +1,110 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on rdjpgcom.dsp
+!IF "$(CFG)" == ""
+CFG=rdjpgcom - Win32
+!MESSAGE Keine Konfiguration angegeben. rdjpgcom - Win32 wird als Standard verwendet.
+!ENDIF 
+
+!IF "$(CFG)" != "rdjpgcom - Win32"
+!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben.
+!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "rdjpgcom.mak" CFG="rdjpgcom - Win32"
+!MESSAGE 
+!MESSAGE Für die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "rdjpgcom - Win32" (basierend auf  "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR Eine ungültige Konfiguration wurde angegeben.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+CPP=cl.exe
+RSC=rc.exe
+OUTDIR=.\rdjpgcom\Release
+INTDIR=.\rdjpgcom\Release
+# Begin Custom Macros
+OutDir=.\rdjpgcom\Release
+# End Custom Macros
+
+ALL : "$(OUTDIR)\rdjpgcom.exe"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\rdjpgcom.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(OUTDIR)\rdjpgcom.exe"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\rdjpgcom.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\rdjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)\rdjpgcom.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\rdjpgcom.obj"
+
+"$(OUTDIR)\rdjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+
+CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\rdjpgcom.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("rdjpgcom.dep")
+!INCLUDE "rdjpgcom.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "rdjpgcom.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "rdjpgcom - Win32"
+SOURCE=.\rdjpgcom.c
+
+"$(INTDIR)\rdjpgcom.obj" : $(SOURCE) "$(INTDIR)"
+
+
+
+!ENDIF 
+
diff --git a/jpeg-8d/makervcx.v10 b/jpeg-8d/makervcx.v10
new file mode 100644
index 0000000..366d4fc
--- /dev/null
+++ b/jpeg-8d/makervcx.v10
@@ -0,0 +1,62 @@
+‹¯¨<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{C81513DB-78DC-46BC-BC98-82E745203976}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>rdjpgcom</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>$(ProjectName)\$(Configuration)\</OutDir>
+    <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>NotUsing</PrecompiledHeader>
+      <Optimization>Full</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS</PreprocessorDefinitions>
+      <OmitFramePointers>true</OmitFramePointers>
+      <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
+      <DisableSpecificWarnings>4996</DisableSpecificWarnings>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="jconfig.h" />
+    <ClInclude Include="jinclude.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="rdjpgcom.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>
\ No newline at end of file
diff --git a/jpeg-8d/maketdep.vc6 b/jpeg-8d/maketdep.vc6
new file mode 100644
index 0000000..e177ecb
--- /dev/null
+++ b/jpeg-8d/maketdep.vc6
@@ -0,0 +1,43 @@
+# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von jpegtran.mak
+
+.\cdjpeg.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\jpegtran.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	".\jversion.h"\
+	".\transupp.h"\
+	
+
+.\rdswitch.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\transupp.c : \
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpegint.h"\
+	".\jpeglib.h"\
+	".\transupp.h"\
+	
diff --git a/jpeg-8d/maketdsp.vc6 b/jpeg-8d/maketdsp.vc6
new file mode 100644
index 0000000..fe1ae9a
--- /dev/null
+++ b/jpeg-8d/maketdsp.vc6
@@ -0,0 +1,122 @@
+# Microsoft Developer Studio Project File - Name="jpegtran" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** NICHT BEARBEITEN **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=jpegtran - Win32
+!MESSAGE Dies ist kein g�ltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE
+!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und f�hren Sie den Befehl
+!MESSAGE 
+!MESSAGE NMAKE /f "jpegtran.mak".
+!MESSAGE 
+!MESSAGE Sie k÷nnen beim Ausf�hren von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "jpegtran.mak" CFG="jpegtran - Win32"
+!MESSAGE 
+!MESSAGE F�r die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "jpegtran - Win32" (basierend auf  "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir ".\jpegtran\Release"
+# PROP BASE Intermediate_Dir ".\jpegtran\Release"
+# PROP BASE Target_Dir ".\jpegtran"
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir ".\jpegtran\Release"
+# PROP Intermediate_Dir ".\jpegtran\Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ".\jpegtran"
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
+# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# Begin Target
+
+# Name "jpegtran - Win32"
+# Begin Group "Quellcodedateien"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90"
+# Begin Source File
+
+SOURCE=.\cdjpeg.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\jpegtran.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\rdswitch.c
+# End Source File
+# Begin Source File
+
+SOURCE=.\transupp.c
+# End Source File
+# End Group
+# Begin Group "Header-Dateien"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
+# Begin Source File
+
+SOURCE=.\cderror.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\cdjpeg.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jconfig.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jerror.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jinclude.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jmorecfg.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jpegint.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jpeglib.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jversion.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\transupp.h
+# End Source File
+# End Group
+# Begin Group "Ressourcendateien"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project
diff --git a/jpeg-8d/maketfil.v10 b/jpeg-8d/maketfil.v10
new file mode 100644
index 0000000..fae0094
--- /dev/null
+++ b/jpeg-8d/maketfil.v10
@@ -0,0 +1,63 @@
+‹¯¨<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="cderror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="cdjpeg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jconfig.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jerror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jinclude.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jmorecfg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jpegint.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jpeglib.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jversion.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="transupp.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="cdjpeg.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jpegtran.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdswitch.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="transupp.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>
\ No newline at end of file
diff --git a/jpeg-8d/maketmak.vc6 b/jpeg-8d/maketmak.vc6
new file mode 100644
index 0000000..a0de38c
--- /dev/null
+++ b/jpeg-8d/maketmak.vc6
@@ -0,0 +1,131 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on jpegtran.dsp
+!IF "$(CFG)" == ""
+CFG=jpegtran - Win32
+!MESSAGE Keine Konfiguration angegeben. jpegtran - Win32 wird als Standard verwendet.
+!ENDIF 
+
+!IF "$(CFG)" != "jpegtran - Win32"
+!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben.
+!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "jpegtran.mak" CFG="jpegtran - Win32"
+!MESSAGE 
+!MESSAGE Für die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "jpegtran - Win32" (basierend auf  "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR Eine ungültige Konfiguration wurde angegeben.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+CPP=cl.exe
+RSC=rc.exe
+OUTDIR=.\jpegtran\Release
+INTDIR=.\jpegtran\Release
+# Begin Custom Macros
+OutDir=.\jpegtran\Release
+# End Custom Macros
+
+ALL : "$(OUTDIR)\jpegtran.exe"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\cdjpeg.obj"
+	-@erase "$(INTDIR)\jpegtran.obj"
+	-@erase "$(INTDIR)\rdswitch.obj"
+	-@erase "$(INTDIR)\transupp.obj"
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(OUTDIR)\jpegtran.exe"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\jpegtran.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\jpegtran.pdb" /machine:I386 /out:"$(OUTDIR)\jpegtran.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\cdjpeg.obj" \
+	"$(INTDIR)\jpegtran.obj" \
+	"$(INTDIR)\rdswitch.obj" \
+	"$(INTDIR)\transupp.obj"
+
+"$(OUTDIR)\jpegtran.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+
+CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\jpegtran.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("jpegtran.dep")
+!INCLUDE "jpegtran.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "jpegtran.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "jpegtran - Win32"
+SOURCE=.\cdjpeg.c
+
+"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\jpegtran.c
+
+"$(INTDIR)\jpegtran.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\rdswitch.c
+
+"$(INTDIR)\rdswitch.obj" : $(SOURCE) "$(INTDIR)"
+
+
+SOURCE=.\transupp.c
+
+"$(INTDIR)\transupp.obj" : $(SOURCE) "$(INTDIR)"
+
+
+
+!ENDIF 
+
diff --git a/jpeg-8d/maketvcx.v10 b/jpeg-8d/maketvcx.v10
new file mode 100644
index 0000000..e2b4ea3
--- /dev/null
+++ b/jpeg-8d/maketvcx.v10
@@ -0,0 +1,74 @@
+‹¯¨<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{025BAC50-51B5-4FFE-BC47-3F920BB4047E}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>jpegtran</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>$(ProjectName)\$(Configuration)\</OutDir>
+    <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>NotUsing</PrecompiledHeader>
+      <Optimization>Full</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS</PreprocessorDefinitions>
+      <OmitFramePointers>true</OmitFramePointers>
+      <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
+      <DisableSpecificWarnings>4996</DisableSpecificWarnings>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <AdditionalDependencies>Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="cderror.h" />
+    <ClInclude Include="cdjpeg.h" />
+    <ClInclude Include="jconfig.h" />
+    <ClInclude Include="jerror.h" />
+    <ClInclude Include="jinclude.h" />
+    <ClInclude Include="jmorecfg.h" />
+    <ClInclude Include="jpegint.h" />
+    <ClInclude Include="jpeglib.h" />
+    <ClInclude Include="jversion.h" />
+    <ClInclude Include="transupp.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="cdjpeg.c" />
+    <ClCompile Include="jpegtran.c" />
+    <ClCompile Include="rdswitch.c" />
+    <ClCompile Include="transupp.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>
\ No newline at end of file
diff --git a/jpeg-8d/makewdep.vc6 b/jpeg-8d/makewdep.vc6
new file mode 100644
index 0000000..15929bf
--- /dev/null
+++ b/jpeg-8d/makewdep.vc6
@@ -0,0 +1,6 @@
+# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von wrjpgcom.mak
+
+.\wrjpgcom.c : \
+	".\jconfig.h"\
+	".\jinclude.h"\
+	
diff --git a/jpeg-8d/makewdsp.vc6 b/jpeg-8d/makewdsp.vc6
new file mode 100644
index 0000000..2063b1a
--- /dev/null
+++ b/jpeg-8d/makewdsp.vc6
@@ -0,0 +1,78 @@
+# Microsoft Developer Studio Project File - Name="wrjpgcom" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** NICHT BEARBEITEN **
+
+# TARGTYPE "Win32 (x86) Console Application" 0x0103
+
+CFG=wrjpgcom - Win32
+!MESSAGE Dies ist kein g�ltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE
+!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und f�hren Sie den Befehl
+!MESSAGE 
+!MESSAGE NMAKE /f "wrjpgcom.mak".
+!MESSAGE 
+!MESSAGE Sie k÷nnen beim Ausf�hren von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "wrjpgcom.mak" CFG="wrjpgcom - Win32"
+!MESSAGE 
+!MESSAGE F�r die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "wrjpgcom - Win32" (basierend auf  "Win32 (x86) Console Application")
+!MESSAGE 
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir ".\wrjpgcom\Release"
+# PROP BASE Intermediate_Dir ".\wrjpgcom\Release"
+# PROP BASE Target_Dir ".\wrjpgcom"
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir ".\wrjpgcom\Release"
+# PROP Intermediate_Dir ".\wrjpgcom\Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ".\wrjpgcom"
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
+# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
+# Begin Target
+
+# Name "wrjpgcom - Win32"
+# Begin Group "Quellcodedateien"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90"
+# Begin Source File
+
+SOURCE=.\wrjpgcom.c
+# End Source File
+# End Group
+# Begin Group "Header-Dateien"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
+# Begin Source File
+
+SOURCE=.\jconfig.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\jinclude.h
+# End Source File
+# End Group
+# Begin Group "Ressourcendateien"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project
diff --git a/jpeg-8d/makewfil.v10 b/jpeg-8d/makewfil.v10
new file mode 100644
index 0000000..72c5856
--- /dev/null
+++ b/jpeg-8d/makewfil.v10
@@ -0,0 +1,30 @@
+‹¯¨<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="jconfig.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jinclude.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="wrjpgcom.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>
\ No newline at end of file
diff --git a/jpeg-8d/makewmak.vc6 b/jpeg-8d/makewmak.vc6
new file mode 100644
index 0000000..22b9086
--- /dev/null
+++ b/jpeg-8d/makewmak.vc6
@@ -0,0 +1,110 @@
+# Microsoft Developer Studio Generated NMAKE File, Based on wrjpgcom.dsp
+!IF "$(CFG)" == ""
+CFG=wrjpgcom - Win32
+!MESSAGE Keine Konfiguration angegeben. wrjpgcom - Win32 wird als Standard verwendet.
+!ENDIF 
+
+!IF "$(CFG)" != "wrjpgcom - Win32"
+!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben.
+!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben
+!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel:
+!MESSAGE 
+!MESSAGE NMAKE /f "wrjpgcom.mak" CFG="wrjpgcom - Win32"
+!MESSAGE 
+!MESSAGE Für die Konfiguration stehen zur Auswahl:
+!MESSAGE 
+!MESSAGE "wrjpgcom - Win32" (basierend auf  "Win32 (x86) Console Application")
+!MESSAGE 
+!ERROR Eine ungültige Konfiguration wurde angegeben.
+!ENDIF 
+
+!IF "$(OS)" == "Windows_NT"
+NULL=
+!ELSE 
+NULL=nul
+!ENDIF 
+
+CPP=cl.exe
+RSC=rc.exe
+OUTDIR=.\wrjpgcom\Release
+INTDIR=.\wrjpgcom\Release
+# Begin Custom Macros
+OutDir=.\wrjpgcom\Release
+# End Custom Macros
+
+ALL : "$(OUTDIR)\wrjpgcom.exe"
+
+
+CLEAN :
+	-@erase "$(INTDIR)\vc60.idb"
+	-@erase "$(INTDIR)\wrjpgcom.obj"
+	-@erase "$(OUTDIR)\wrjpgcom.exe"
+
+"$(OUTDIR)" :
+    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
+
+BSC32=bscmake.exe
+BSC32_FLAGS=/nologo /o"$(OUTDIR)\wrjpgcom.bsc" 
+BSC32_SBRS= \
+	
+LINK32=link.exe
+LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\wrjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)\wrjpgcom.exe" 
+LINK32_OBJS= \
+	"$(INTDIR)\wrjpgcom.obj"
+
+"$(OUTDIR)\wrjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
+    $(LINK32) @<<
+  $(LINK32_FLAGS) $(LINK32_OBJS)
+<<
+
+CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\wrjpgcom.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c 
+
+.c{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.obj::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.c{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cpp{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+.cxx{$(INTDIR)}.sbr::
+   $(CPP) @<<
+   $(CPP_PROJ) $< 
+<<
+
+
+!IF "$(NO_EXTERNAL_DEPS)" != "1"
+!IF EXISTS("wrjpgcom.dep")
+!INCLUDE "wrjpgcom.dep"
+!ELSE 
+!MESSAGE Warning: cannot find "wrjpgcom.dep"
+!ENDIF 
+!ENDIF 
+
+
+!IF "$(CFG)" == "wrjpgcom - Win32"
+SOURCE=.\wrjpgcom.c
+
+"$(INTDIR)\wrjpgcom.obj" : $(SOURCE) "$(INTDIR)"
+
+
+
+!ENDIF 
+
diff --git a/jpeg-8d/makewvcx.v10 b/jpeg-8d/makewvcx.v10
new file mode 100644
index 0000000..e6c546a
--- /dev/null
+++ b/jpeg-8d/makewvcx.v10
@@ -0,0 +1,62 @@
+‹¯¨<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{B57065D4-DDDA-4668-BAF5-2D49270C973C}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>wrjpgcom</RootNamespace>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>$(ProjectName)\$(Configuration)\</OutDir>
+    <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>NotUsing</PrecompiledHeader>
+      <Optimization>Full</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS</PreprocessorDefinitions>
+      <OmitFramePointers>true</OmitFramePointers>
+      <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
+      <DisableSpecificWarnings>4996</DisableSpecificWarnings>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="jconfig.h" />
+    <ClInclude Include="jinclude.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="wrjpgcom.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>
\ No newline at end of file
diff --git a/jpeg-8d/makljpeg.st b/jpeg-8d/makljpeg.st
new file mode 100644
index 0000000..cc1ba01
--- /dev/null
+++ b/jpeg-8d/makljpeg.st
@@ -0,0 +1,68 @@
+; Project file for Independent JPEG Group's software
+;
+; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
+; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding.
+;
+; To use this file, rename it to libjpeg.prj.
+; Read installation instructions before trying to make the program!
+;
+;
+;      * * * Output file * * *
+libjpeg.lib
+;
+; * * * COMPILER OPTIONS * * *  
+.C[-P]        ; absolute calls
+.C[-M]        ; and no string merging, folks
+.C[-w-cln]    ; no "constant is long" warnings
+.C[-w-par]    ; no "parameter xxxx unused"
+.C[-w-rch]    ; no "unreachable code"
+.C[-wsig]     ; warn if significant digits may be lost
+.L[-J]        ; link new Obj-format (so we get a library)
+=
+; * * * * List of modules * * * * 
+jaricom.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jcapimin.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jcapistd.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jcarith.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jccoefct.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jccolor.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jcdctmgr.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
+jchuff.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jcinit.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jcmainct.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jcmarker.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jcmaster.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jcomapi.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jcparam.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jcprepct.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jcsample.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jctrans.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdapimin.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdapistd.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdarith.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdatadst.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h)
+jdatasrc.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h)
+jdcoefct.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdcolor.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jddctmgr.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
+jdhuff.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdinput.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdmainct.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdmarker.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdmaster.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdmerge.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdpostct.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdsample.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jdtrans.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jerror.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jversion.h,jerror.h)
+jfdctflt.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
+jfdctfst.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
+jfdctint.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
+jidctflt.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
+jidctfst.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
+jidctint.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
+jquant1.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jquant2.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jutils.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
+jmemmgr.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h)
+jmemansi.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h)
diff --git a/jpeg-8d/maktjpeg.st b/jpeg-8d/maktjpeg.st
new file mode 100644
index 0000000..43f078a
--- /dev/null
+++ b/jpeg-8d/maktjpeg.st
@@ -0,0 +1,30 @@
+; Project file for Independent JPEG Group's software
+;
+; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
+; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding.
+;
+; To use this file, rename it to jpegtran.prj.
+; If you are using Turbo C, change filenames beginning with "pc..." to "tc..."
+; Read installation instructions before trying to make the program!
+;
+;
+;      * * * Output file * * *
+jpegtran.ttp
+;
+; * * * COMPILER OPTIONS * * *  
+.C[-P]        ; absolute calls
+.C[-M]        ; and no string merging, folks
+.C[-w-cln]    ; no "constant is long" warnings
+.C[-w-par]    ; no "parameter xxxx unused"
+.C[-w-rch]    ; no "unreachable code"
+.C[-wsig]     ; warn if significant digits may be lost
+=
+; * * * * List of modules * * * * 
+pcstart.o
+jpegtran.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,transupp.h,jversion.h)
+cdjpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+rdswitch.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
+transupp.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,transupp.h)
+libjpeg.lib        ; built by libjpeg.prj
+pcstdlib.lib       ; standard library
+pcextlib.lib       ; extended library
diff --git a/jpeg-8d/makvms.opt b/jpeg-8d/makvms.opt
new file mode 100644
index 0000000..675e8fe
--- /dev/null
+++ b/jpeg-8d/makvms.opt
@@ -0,0 +1,4 @@
+! A pointer to the VAX/VMS C Run-Time Shareable Library.
+! This file is needed by makefile.mms and makefile.vms,
+! but only for the older VAX C compiler.  DEC C does not need it.
+Sys$Library:VAXCRTL.EXE /Share
diff --git a/jpeg-8d/missing b/jpeg-8d/missing
new file mode 100644
index 0000000..28055d2
--- /dev/null
+++ b/jpeg-8d/missing
@@ -0,0 +1,376 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+  lex*|yacc*)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar*)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case $f in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te*)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison*|yacc*)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f y.tab.h; then
+	echo >y.tab.h
+    fi
+    if test ! -f y.tab.c; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex*|flex*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f lex.yy.c; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit $?
+    fi
+    ;;
+
+  makeinfo*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  tar*)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case $firstarg in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case $firstarg in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/jpeg-8d/rdbmp.c b/jpeg-8d/rdbmp.c
new file mode 100644
index 0000000..fd773d4
--- /dev/null
+++ b/jpeg-8d/rdbmp.c
@@ -0,0 +1,480 @@
+/*
+ * rdbmp.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2009-2010 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to read input images in Microsoft "BMP"
+ * format (MS Windows 3.x, OS/2 1.x, and OS/2 2.x flavors).
+ * Currently, only 8-bit and 24-bit images are supported, not 1-bit or
+ * 4-bit (feeding such low-depth images into JPEG would be silly anyway).
+ * Also, we don't support RLE-compressed files.
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume input from
+ * an ordinary stdio stream.  They further assume that reading begins
+ * at the start of the file; start_input may need work if the
+ * user interface has already read some data (e.g., to determine that
+ * the file is indeed BMP format).
+ *
+ * This code contributed by James Arthur Boucher.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef BMP_SUPPORTED
+
+
+/* Macros to deal with unsigned chars as efficiently as compiler allows */
+
+#ifdef HAVE_UNSIGNED_CHAR
+typedef unsigned char U_CHAR;
+#define UCH(x)	((int) (x))
+#else /* !HAVE_UNSIGNED_CHAR */
+#ifdef CHAR_IS_UNSIGNED
+typedef char U_CHAR;
+#define UCH(x)	((int) (x))
+#else
+typedef char U_CHAR;
+#define UCH(x)	((int) (x) & 0xFF)
+#endif
+#endif /* HAVE_UNSIGNED_CHAR */
+
+
+#define	ReadOK(file,buffer,len)	(JFREAD(file,buffer,len) == ((size_t) (len)))
+
+
+/* Private version of data source object */
+
+typedef struct _bmp_source_struct * bmp_source_ptr;
+
+typedef struct _bmp_source_struct {
+  struct cjpeg_source_struct pub; /* public fields */
+
+  j_compress_ptr cinfo;		/* back link saves passing separate parm */
+
+  JSAMPARRAY colormap;		/* BMP colormap (converted to my format) */
+
+  jvirt_sarray_ptr whole_image;	/* Needed to reverse row order */
+  JDIMENSION source_row;	/* Current source row number */
+  JDIMENSION row_width;		/* Physical width of scanlines in file */
+
+  int bits_per_pixel;		/* remembers 8- or 24-bit format */
+} bmp_source_struct;
+
+
+LOCAL(int)
+read_byte (bmp_source_ptr sinfo)
+/* Read next byte from BMP file */
+{
+  register FILE *infile = sinfo->pub.input_file;
+  register int c;
+
+  if ((c = getc(infile)) == EOF)
+    ERREXIT(sinfo->cinfo, JERR_INPUT_EOF);
+  return c;
+}
+
+
+LOCAL(void)
+read_colormap (bmp_source_ptr sinfo, int cmaplen, int mapentrysize)
+/* Read the colormap from a BMP file */
+{
+  int i;
+
+  switch (mapentrysize) {
+  case 3:
+    /* BGR format (occurs in OS/2 files) */
+    for (i = 0; i < cmaplen; i++) {
+      sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo);
+      sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo);
+      sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo);
+    }
+    break;
+  case 4:
+    /* BGR0 format (occurs in MS Windows files) */
+    for (i = 0; i < cmaplen; i++) {
+      sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo);
+      sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo);
+      sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo);
+      (void) read_byte(sinfo);
+    }
+    break;
+  default:
+    ERREXIT(sinfo->cinfo, JERR_BMP_BADCMAP);
+    break;
+  }
+}
+
+
+/*
+ * Read one row of pixels.
+ * The image has been read into the whole_image array, but is otherwise
+ * unprocessed.  We must read it out in top-to-bottom row order, and if
+ * it is an 8-bit image, we must expand colormapped pixels to 24bit format.
+ */
+
+METHODDEF(JDIMENSION)
+get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 8-bit colormap indexes */
+{
+  bmp_source_ptr source = (bmp_source_ptr) sinfo;
+  register JSAMPARRAY colormap = source->colormap;
+  JSAMPARRAY image_ptr;
+  register int t;
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+
+  /* Fetch next row from virtual array */
+  source->source_row--;
+  image_ptr = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, source->whole_image,
+     source->source_row, (JDIMENSION) 1, FALSE);
+
+  /* Expand the colormap indexes to real data */
+  inptr = image_ptr[0];
+  outptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    t = GETJSAMPLE(*inptr++);
+    *outptr++ = colormap[0][t];	/* can omit GETJSAMPLE() safely */
+    *outptr++ = colormap[1][t];
+    *outptr++ = colormap[2][t];
+  }
+
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 24-bit pixels */
+{
+  bmp_source_ptr source = (bmp_source_ptr) sinfo;
+  JSAMPARRAY image_ptr;
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+
+  /* Fetch next row from virtual array */
+  source->source_row--;
+  image_ptr = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, source->whole_image,
+     source->source_row, (JDIMENSION) 1, FALSE);
+
+  /* Transfer data.  Note source values are in BGR order
+   * (even though Microsoft's own documents say the opposite).
+   */
+  inptr = image_ptr[0];
+  outptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    outptr[2] = *inptr++;	/* can omit GETJSAMPLE() safely */
+    outptr[1] = *inptr++;
+    outptr[0] = *inptr++;
+    outptr += 3;
+  }
+
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_32bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 32-bit pixels */
+{
+  bmp_source_ptr source = (bmp_source_ptr) sinfo;
+  JSAMPARRAY image_ptr;
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+
+  /* Fetch next row from virtual array */
+  source->source_row--;
+  image_ptr = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, source->whole_image,
+     source->source_row, (JDIMENSION) 1, FALSE);
+  /* Transfer data.  Note source values are in BGR order
+   * (even though Microsoft's own documents say the opposite).
+   */
+  inptr = image_ptr[0];
+  outptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    outptr[2] = *inptr++;	/* can omit GETJSAMPLE() safely */
+    outptr[1] = *inptr++;
+    outptr[0] = *inptr++;
+    inptr++;			/* skip the 4th byte (Alpha channel) */
+    outptr += 3;
+  }
+
+  return 1;
+}
+
+
+/*
+ * This method loads the image into whole_image during the first call on
+ * get_pixel_rows.  The get_pixel_rows pointer is then adjusted to call
+ * get_8bit_row, get_24bit_row, or get_32bit_row on subsequent calls.
+ */
+
+METHODDEF(JDIMENSION)
+preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  bmp_source_ptr source = (bmp_source_ptr) sinfo;
+  register FILE *infile = source->pub.input_file;
+  register int c;
+  register JSAMPROW out_ptr;
+  JSAMPARRAY image_ptr;
+  JDIMENSION row, col;
+  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+
+  /* Read the data into a virtual array in input-file row order. */
+  for (row = 0; row < cinfo->image_height; row++) {
+    if (progress != NULL) {
+      progress->pub.pass_counter = (long) row;
+      progress->pub.pass_limit = (long) cinfo->image_height;
+      (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+    }
+    image_ptr = (*cinfo->mem->access_virt_sarray)
+      ((j_common_ptr) cinfo, source->whole_image,
+       row, (JDIMENSION) 1, TRUE);
+    out_ptr = image_ptr[0];
+    for (col = source->row_width; col > 0; col--) {
+      /* inline copy of read_byte() for speed */
+      if ((c = getc(infile)) == EOF)
+	ERREXIT(cinfo, JERR_INPUT_EOF);
+      *out_ptr++ = (JSAMPLE) c;
+    }
+  }
+  if (progress != NULL)
+    progress->completed_extra_passes++;
+
+  /* Set up to read from the virtual array in top-to-bottom order */
+  switch (source->bits_per_pixel) {
+  case 8:
+    source->pub.get_pixel_rows = get_8bit_row;
+    break;
+  case 24:
+    source->pub.get_pixel_rows = get_24bit_row;
+    break;
+  case 32:
+    source->pub.get_pixel_rows = get_32bit_row;
+    break;
+  default:
+    ERREXIT(cinfo, JERR_BMP_BADDEPTH);
+  }
+  source->source_row = cinfo->image_height;
+
+  /* And read the first row */
+  return (*source->pub.get_pixel_rows) (cinfo, sinfo);
+}
+
+
+/*
+ * Read the file header; return image size and component count.
+ */
+
+METHODDEF(void)
+start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  bmp_source_ptr source = (bmp_source_ptr) sinfo;
+  U_CHAR bmpfileheader[14];
+  U_CHAR bmpinfoheader[64];
+#define GET_2B(array,offset)  ((unsigned int) UCH(array[offset]) + \
+			       (((unsigned int) UCH(array[offset+1])) << 8))
+#define GET_4B(array,offset)  ((INT32) UCH(array[offset]) + \
+			       (((INT32) UCH(array[offset+1])) << 8) + \
+			       (((INT32) UCH(array[offset+2])) << 16) + \
+			       (((INT32) UCH(array[offset+3])) << 24))
+  INT32 bfOffBits;
+  INT32 headerSize;
+  INT32 biWidth;
+  INT32 biHeight;
+  unsigned int biPlanes;
+  INT32 biCompression;
+  INT32 biXPelsPerMeter,biYPelsPerMeter;
+  INT32 biClrUsed = 0;
+  int mapentrysize = 0;		/* 0 indicates no colormap */
+  INT32 bPad;
+  JDIMENSION row_width;
+
+  /* Read and verify the bitmap file header */
+  if (! ReadOK(source->pub.input_file, bmpfileheader, 14))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  if (GET_2B(bmpfileheader,0) != 0x4D42) /* 'BM' */
+    ERREXIT(cinfo, JERR_BMP_NOT);
+  bfOffBits = (INT32) GET_4B(bmpfileheader,10);
+  /* We ignore the remaining fileheader fields */
+
+  /* The infoheader might be 12 bytes (OS/2 1.x), 40 bytes (Windows),
+   * or 64 bytes (OS/2 2.x).  Check the first 4 bytes to find out which.
+   */
+  if (! ReadOK(source->pub.input_file, bmpinfoheader, 4))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  headerSize = (INT32) GET_4B(bmpinfoheader,0);
+  if (headerSize < 12 || headerSize > 64)
+    ERREXIT(cinfo, JERR_BMP_BADHEADER);
+  if (! ReadOK(source->pub.input_file, bmpinfoheader+4, headerSize-4))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+
+  switch ((int) headerSize) {
+  case 12:
+    /* Decode OS/2 1.x header (Microsoft calls this a BITMAPCOREHEADER) */
+    biWidth = (INT32) GET_2B(bmpinfoheader,4);
+    biHeight = (INT32) GET_2B(bmpinfoheader,6);
+    biPlanes = GET_2B(bmpinfoheader,8);
+    source->bits_per_pixel = (int) GET_2B(bmpinfoheader,10);
+
+    switch (source->bits_per_pixel) {
+    case 8:			/* colormapped image */
+      mapentrysize = 3;		/* OS/2 uses RGBTRIPLE colormap */
+      TRACEMS2(cinfo, 1, JTRC_BMP_OS2_MAPPED, (int) biWidth, (int) biHeight);
+      break;
+    case 24:			/* RGB image */
+      TRACEMS2(cinfo, 1, JTRC_BMP_OS2, (int) biWidth, (int) biHeight);
+      break;
+    default:
+      ERREXIT(cinfo, JERR_BMP_BADDEPTH);
+      break;
+    }
+    break;
+  case 40:
+  case 64:
+    /* Decode Windows 3.x header (Microsoft calls this a BITMAPINFOHEADER) */
+    /* or OS/2 2.x header, which has additional fields that we ignore */
+    biWidth = GET_4B(bmpinfoheader,4);
+    biHeight = GET_4B(bmpinfoheader,8);
+    biPlanes = GET_2B(bmpinfoheader,12);
+    source->bits_per_pixel = (int) GET_2B(bmpinfoheader,14);
+    biCompression = GET_4B(bmpinfoheader,16);
+    biXPelsPerMeter = GET_4B(bmpinfoheader,24);
+    biYPelsPerMeter = GET_4B(bmpinfoheader,28);
+    biClrUsed = GET_4B(bmpinfoheader,32);
+    /* biSizeImage, biClrImportant fields are ignored */
+
+    switch (source->bits_per_pixel) {
+    case 8:			/* colormapped image */
+      mapentrysize = 4;		/* Windows uses RGBQUAD colormap */
+      TRACEMS2(cinfo, 1, JTRC_BMP_MAPPED, (int) biWidth, (int) biHeight);
+      break;
+    case 24:			/* RGB image */
+      TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight);
+      break;
+    case 32:			/* RGB image + Alpha channel */
+      TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight);
+      break;
+    default:
+      ERREXIT(cinfo, JERR_BMP_BADDEPTH);
+      break;
+    }
+    if (biCompression != 0)
+      ERREXIT(cinfo, JERR_BMP_COMPRESSED);
+
+    if (biXPelsPerMeter > 0 && biYPelsPerMeter > 0) {
+      /* Set JFIF density parameters from the BMP data */
+      cinfo->X_density = (UINT16) (biXPelsPerMeter/100); /* 100 cm per meter */
+      cinfo->Y_density = (UINT16) (biYPelsPerMeter/100);
+      cinfo->density_unit = 2;	/* dots/cm */
+    }
+    break;
+  default:
+    ERREXIT(cinfo, JERR_BMP_BADHEADER);
+    return;
+  }
+
+  if (biWidth <= 0 || biHeight <= 0)
+    ERREXIT(cinfo, JERR_BMP_EMPTY);
+  if (biPlanes != 1)
+    ERREXIT(cinfo, JERR_BMP_BADPLANES);
+
+  /* Compute distance to bitmap data --- will adjust for colormap below */
+  bPad = bfOffBits - (headerSize + 14);
+
+  /* Read the colormap, if any */
+  if (mapentrysize > 0) {
+    if (biClrUsed <= 0)
+      biClrUsed = 256;		/* assume it's 256 */
+    else if (biClrUsed > 256)
+      ERREXIT(cinfo, JERR_BMP_BADCMAP);
+    /* Allocate space to store the colormap */
+    source->colormap = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (JDIMENSION) biClrUsed, (JDIMENSION) 3);
+    /* and read it from the file */
+    read_colormap(source, (int) biClrUsed, mapentrysize);
+    /* account for size of colormap */
+    bPad -= biClrUsed * mapentrysize;
+  }
+
+  /* Skip any remaining pad bytes */
+  if (bPad < 0)			/* incorrect bfOffBits value? */
+    ERREXIT(cinfo, JERR_BMP_BADHEADER);
+  while (--bPad >= 0) {
+    (void) read_byte(source);
+  }
+
+  /* Compute row width in file, including padding to 4-byte boundary */
+  if (source->bits_per_pixel == 24)
+    row_width = (JDIMENSION) (biWidth * 3);
+  else if (source->bits_per_pixel == 32)
+    row_width = (JDIMENSION) (biWidth * 4);
+  else
+    row_width = (JDIMENSION) biWidth;
+  while ((row_width & 3) != 0) row_width++;
+  source->row_width = row_width;
+
+  /* Allocate space for inversion array, prepare for preload pass */
+  source->whole_image = (*cinfo->mem->request_virt_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+     row_width, (JDIMENSION) biHeight, (JDIMENSION) 1);
+  source->pub.get_pixel_rows = preload_image;
+  if (cinfo->progress != NULL) {
+    cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+    progress->total_extra_passes++; /* count file input as separate pass */
+  }
+
+  /* Allocate one-row buffer for returned data */
+  source->pub.buffer = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE,
+     (JDIMENSION) (biWidth * 3), (JDIMENSION) 1);
+  source->pub.buffer_height = 1;
+
+  cinfo->in_color_space = JCS_RGB;
+  cinfo->input_components = 3;
+  cinfo->data_precision = 8;
+  cinfo->image_width = (JDIMENSION) biWidth;
+  cinfo->image_height = (JDIMENSION) biHeight;
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  /* no work */
+}
+
+
+/*
+ * The module selection routine for BMP format input.
+ */
+
+GLOBAL(cjpeg_source_ptr)
+jinit_read_bmp (j_compress_ptr cinfo)
+{
+  bmp_source_ptr source;
+
+  /* Create module interface object */
+  source = (bmp_source_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(bmp_source_struct));
+  source->cinfo = cinfo;	/* make back link for subroutines */
+  /* Fill in method ptrs, except get_pixel_rows which start_input sets */
+  source->pub.start_input = start_input_bmp;
+  source->pub.finish_input = finish_input_bmp;
+
+  return (cjpeg_source_ptr) source;
+}
+
+#endif /* BMP_SUPPORTED */
diff --git a/jpeg-8d/rdcolmap.c b/jpeg-8d/rdcolmap.c
new file mode 100644
index 0000000..42b3437
--- /dev/null
+++ b/jpeg-8d/rdcolmap.c
@@ -0,0 +1,253 @@
+/*
+ * rdcolmap.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file implements djpeg's "-map file" switch.  It reads a source image
+ * and constructs a colormap to be supplied to the JPEG decompressor.
+ *
+ * Currently, these file formats are supported for the map file:
+ *   GIF: the contents of the GIF's global colormap are used.
+ *   PPM (either text or raw flavor): the entire file is read and
+ *      each unique pixel value is entered in the map.
+ * Note that reading a large PPM file will be horrendously slow.
+ * Typically, a PPM-format map file should contain just one pixel
+ * of each desired color.  Such a file can be extracted from an
+ * ordinary image PPM file with ppmtomap(1).
+ *
+ * Rescaling a PPM that has a maxval unequal to MAXJSAMPLE is not
+ * currently implemented.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef QUANT_2PASS_SUPPORTED	/* otherwise can't quantize to supplied map */
+
+/* Portions of this code are based on the PBMPLUS library, which is:
+**
+** Copyright (C) 1988 by Jef Poskanzer.
+**
+** Permission to use, copy, modify, and distribute this software and its
+** documentation for any purpose and without fee is hereby granted, provided
+** that the above copyright notice appear in all copies and that both that
+** copyright notice and this permission notice appear in supporting
+** documentation.  This software is provided "as is" without express or
+** implied warranty.
+*/
+
+
+/*
+ * Add a (potentially) new color to the color map.
+ */
+
+LOCAL(void)
+add_map_entry (j_decompress_ptr cinfo, int R, int G, int B)
+{
+  JSAMPROW colormap0 = cinfo->colormap[0];
+  JSAMPROW colormap1 = cinfo->colormap[1];
+  JSAMPROW colormap2 = cinfo->colormap[2];
+  int ncolors = cinfo->actual_number_of_colors;
+  int index;
+
+  /* Check for duplicate color. */
+  for (index = 0; index < ncolors; index++) {
+    if (GETJSAMPLE(colormap0[index]) == R &&
+	GETJSAMPLE(colormap1[index]) == G &&
+	GETJSAMPLE(colormap2[index]) == B)
+      return;			/* color is already in map */
+  }
+
+  /* Check for map overflow. */
+  if (ncolors >= (MAXJSAMPLE+1))
+    ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, (MAXJSAMPLE+1));
+
+  /* OK, add color to map. */
+  colormap0[ncolors] = (JSAMPLE) R;
+  colormap1[ncolors] = (JSAMPLE) G;
+  colormap2[ncolors] = (JSAMPLE) B;
+  cinfo->actual_number_of_colors++;
+}
+
+
+/*
+ * Extract color map from a GIF file.
+ */
+
+LOCAL(void)
+read_gif_map (j_decompress_ptr cinfo, FILE * infile)
+{
+  int header[13];
+  int i, colormaplen;
+  int R, G, B;
+
+  /* Initial 'G' has already been read by read_color_map */
+  /* Read the rest of the GIF header and logical screen descriptor */
+  for (i = 1; i < 13; i++) {
+    if ((header[i] = getc(infile)) == EOF)
+      ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+  }
+
+  /* Verify GIF Header */
+  if (header[1] != 'I' || header[2] != 'F')
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+
+  /* There must be a global color map. */
+  if ((header[10] & 0x80) == 0)
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+
+  /* OK, fetch it. */
+  colormaplen = 2 << (header[10] & 0x07);
+
+  for (i = 0; i < colormaplen; i++) {
+    R = getc(infile);
+    G = getc(infile);
+    B = getc(infile);
+    if (R == EOF || G == EOF || B == EOF)
+      ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+    add_map_entry(cinfo,
+		  R << (BITS_IN_JSAMPLE-8),
+		  G << (BITS_IN_JSAMPLE-8),
+		  B << (BITS_IN_JSAMPLE-8));
+  }
+}
+
+
+/* Support routines for reading PPM */
+
+
+LOCAL(int)
+pbm_getc (FILE * infile)
+/* Read next char, skipping over any comments */
+/* A comment/newline sequence is returned as a newline */
+{
+  register int ch;
+  
+  ch = getc(infile);
+  if (ch == '#') {
+    do {
+      ch = getc(infile);
+    } while (ch != '\n' && ch != EOF);
+  }
+  return ch;
+}
+
+
+LOCAL(unsigned int)
+read_pbm_integer (j_decompress_ptr cinfo, FILE * infile)
+/* Read an unsigned decimal integer from the PPM file */
+/* Swallows one trailing character after the integer */
+/* Note that on a 16-bit-int machine, only values up to 64k can be read. */
+/* This should not be a problem in practice. */
+{
+  register int ch;
+  register unsigned int val;
+  
+  /* Skip any leading whitespace */
+  do {
+    ch = pbm_getc(infile);
+    if (ch == EOF)
+      ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+  } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r');
+  
+  if (ch < '0' || ch > '9')
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+  
+  val = ch - '0';
+  while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') {
+    val *= 10;
+    val += ch - '0';
+  }
+  return val;
+}
+
+
+/*
+ * Extract color map from a PPM file.
+ */
+
+LOCAL(void)
+read_ppm_map (j_decompress_ptr cinfo, FILE * infile)
+{
+  int c;
+  unsigned int w, h, maxval, row, col;
+  int R, G, B;
+
+  /* Initial 'P' has already been read by read_color_map */
+  c = getc(infile);		/* save format discriminator for a sec */
+
+  /* while we fetch the remaining header info */
+  w = read_pbm_integer(cinfo, infile);
+  h = read_pbm_integer(cinfo, infile);
+  maxval = read_pbm_integer(cinfo, infile);
+
+  if (w <= 0 || h <= 0 || maxval <= 0) /* error check */
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+
+  /* For now, we don't support rescaling from an unusual maxval. */
+  if (maxval != (unsigned int) MAXJSAMPLE)
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+
+  switch (c) {
+  case '3':			/* it's a text-format PPM file */
+    for (row = 0; row < h; row++) {
+      for (col = 0; col < w; col++) {
+	R = read_pbm_integer(cinfo, infile);
+	G = read_pbm_integer(cinfo, infile);
+	B = read_pbm_integer(cinfo, infile);
+	add_map_entry(cinfo, R, G, B);
+      }
+    }
+    break;
+
+  case '6':			/* it's a raw-format PPM file */
+    for (row = 0; row < h; row++) {
+      for (col = 0; col < w; col++) {
+	R = getc(infile);
+	G = getc(infile);
+	B = getc(infile);
+	if (R == EOF || G == EOF || B == EOF)
+	  ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+	add_map_entry(cinfo, R, G, B);
+      }
+    }
+    break;
+
+  default:
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+    break;
+  }
+}
+
+
+/*
+ * Main entry point from djpeg.c.
+ *  Input: opened input file (from file name argument on command line).
+ *  Output: colormap and actual_number_of_colors fields are set in cinfo.
+ */
+
+GLOBAL(void)
+read_color_map (j_decompress_ptr cinfo, FILE * infile)
+{
+  /* Allocate space for a color map of maximum supported size. */
+  cinfo->colormap = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE,
+     (JDIMENSION) (MAXJSAMPLE+1), (JDIMENSION) 3);
+  cinfo->actual_number_of_colors = 0; /* initialize map to empty */
+
+  /* Read first byte to determine file format */
+  switch (getc(infile)) {
+  case 'G':
+    read_gif_map(cinfo, infile);
+    break;
+  case 'P':
+    read_ppm_map(cinfo, infile);
+    break;
+  default:
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+    break;
+  }
+}
+
+#endif /* QUANT_2PASS_SUPPORTED */
diff --git a/jpeg-8d/rdgif.c b/jpeg-8d/rdgif.c
new file mode 100644
index 0000000..b27c167
--- /dev/null
+++ b/jpeg-8d/rdgif.c
@@ -0,0 +1,38 @@
+/*
+ * rdgif.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to read input images in GIF format.
+ *
+ *****************************************************************************
+ * NOTE: to avoid entanglements with Unisys' patent on LZW compression,      *
+ * the ability to read GIF files has been removed from the IJG distribution. *
+ * Sorry about that.                                                         *
+ *****************************************************************************
+ *
+ * We are required to state that
+ *    "The Graphics Interchange Format(c) is the Copyright property of
+ *    CompuServe Incorporated. GIF(sm) is a Service Mark property of
+ *    CompuServe Incorporated."
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef GIF_SUPPORTED
+
+/*
+ * The module selection routine for GIF format input.
+ */
+
+GLOBAL(cjpeg_source_ptr)
+jinit_read_gif (j_compress_ptr cinfo)
+{
+  fprintf(stderr, "GIF input is unsupported for legal reasons.  Sorry.\n");
+  exit(EXIT_FAILURE);
+  return NULL;			/* keep compiler happy */
+}
+
+#endif /* GIF_SUPPORTED */
diff --git a/jpeg-8d/rdjpgcom.1 b/jpeg-8d/rdjpgcom.1
new file mode 100644
index 0000000..97611df
--- /dev/null
+++ b/jpeg-8d/rdjpgcom.1
@@ -0,0 +1,63 @@
+.TH RDJPGCOM 1 "02 April 2009"
+.SH NAME
+rdjpgcom \- display text comments from a JPEG file
+.SH SYNOPSIS
+.B rdjpgcom
+[
+.B \-raw
+]
+[
+.B \-verbose
+]
+[
+.I filename
+]
+.LP
+.SH DESCRIPTION
+.LP
+.B rdjpgcom
+reads the named JPEG/JFIF file, or the standard input if no file is named,
+and prints any text comments found in the file on the standard output.
+.PP
+The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file.
+Although the standard doesn't actually define what COM blocks are for, they
+are widely used to hold user-supplied text strings.  This lets you add
+annotations, titles, index terms, etc to your JPEG files, and later retrieve
+them as text.  COM blocks do not interfere with the image stored in the JPEG
+file.  The maximum size of a COM block is 64K, but you can have as many of
+them as you like in one JPEG file.
+.SH OPTIONS
+.TP
+.B \-raw
+Normally
+.B rdjpgcom
+escapes non-printable characters in comments, for security reasons.
+This option avoids that.
+.PP
+.B \-verbose
+Causes
+.B rdjpgcom
+to also display the JPEG image dimensions.
+.PP
+Switch names may be abbreviated, and are not case sensitive.
+.SH HINTS
+.B rdjpgcom
+does not depend on the IJG JPEG library.  Its source code is intended as an
+illustration of the minimum amount of code required to parse a JPEG file
+header correctly.
+.PP
+In
+.B \-verbose
+mode,
+.B rdjpgcom
+will also attempt to print the contents of any "APP12" markers as text.
+Some digital cameras produce APP12 markers containing useful textual
+information.  If you like, you can modify the source code to print
+other APPn marker types as well.
+.SH SEE ALSO
+.BR cjpeg (1),
+.BR djpeg (1),
+.BR jpegtran (1),
+.BR wrjpgcom (1)
+.SH AUTHOR
+Independent JPEG Group
diff --git a/jpeg-8d/rdjpgcom.c b/jpeg-8d/rdjpgcom.c
new file mode 100644
index 0000000..3719154
--- /dev/null
+++ b/jpeg-8d/rdjpgcom.c
@@ -0,0 +1,515 @@
+/*
+ * rdjpgcom.c
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 2009 by Bill Allombert, Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a very simple stand-alone application that displays
+ * the text in COM (comment) markers in a JFIF file.
+ * This may be useful as an example of the minimum logic needed to parse
+ * JPEG markers.
+ */
+
+#define JPEG_CJPEG_DJPEG	/* to get the command-line config symbols */
+#include "jinclude.h"		/* get auto-config symbols, <stdio.h> */
+
+#ifdef HAVE_LOCALE_H
+#include <locale.h>		/* Bill Allombert: use locale for isprint */
+#endif
+#include <ctype.h>		/* to declare isupper(), tolower() */
+#ifdef USE_SETMODE
+#include <fcntl.h>		/* to declare setmode()'s parameter macros */
+/* If you have setmode() but not <io.h>, just delete this line: */
+#include <io.h>			/* to declare setmode() */
+#endif
+
+#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
+#ifdef __MWERKS__
+#include <SIOUX.h>              /* Metrowerks needs this */
+#include <console.h>		/* ... and this */
+#endif
+#ifdef THINK_C
+#include <console.h>		/* Think declares it here */
+#endif
+#endif
+
+#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
+#define READ_BINARY	"r"
+#else
+#ifdef VMS			/* VMS is very nonstandard */
+#define READ_BINARY	"rb", "ctx=stm"
+#else				/* standard ANSI-compliant case */
+#define READ_BINARY	"rb"
+#endif
+#endif
+
+#ifndef EXIT_FAILURE		/* define exit() codes if not provided */
+#define EXIT_FAILURE  1
+#endif
+#ifndef EXIT_SUCCESS
+#ifdef VMS
+#define EXIT_SUCCESS  1		/* VMS is very nonstandard */
+#else
+#define EXIT_SUCCESS  0
+#endif
+#endif
+
+
+/*
+ * These macros are used to read the input file.
+ * To reuse this code in another application, you might need to change these.
+ */
+
+static FILE * infile;		/* input JPEG file */
+
+/* Return next input byte, or EOF if no more */
+#define NEXTBYTE()  getc(infile)
+
+
+/* Error exit handler */
+#define ERREXIT(msg)  (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE))
+
+
+/* Read one byte, testing for EOF */
+static int
+read_1_byte (void)
+{
+  int c;
+
+  c = NEXTBYTE();
+  if (c == EOF)
+    ERREXIT("Premature EOF in JPEG file");
+  return c;
+}
+
+/* Read 2 bytes, convert to unsigned int */
+/* All 2-byte quantities in JPEG markers are MSB first */
+static unsigned int
+read_2_bytes (void)
+{
+  int c1, c2;
+
+  c1 = NEXTBYTE();
+  if (c1 == EOF)
+    ERREXIT("Premature EOF in JPEG file");
+  c2 = NEXTBYTE();
+  if (c2 == EOF)
+    ERREXIT("Premature EOF in JPEG file");
+  return (((unsigned int) c1) << 8) + ((unsigned int) c2);
+}
+
+
+/*
+ * JPEG markers consist of one or more 0xFF bytes, followed by a marker
+ * code byte (which is not an FF).  Here are the marker codes of interest
+ * in this program.  (See jdmarker.c for a more complete list.)
+ */
+
+#define M_SOF0  0xC0		/* Start Of Frame N */
+#define M_SOF1  0xC1		/* N indicates which compression process */
+#define M_SOF2  0xC2		/* Only SOF0-SOF2 are now in common use */
+#define M_SOF3  0xC3
+#define M_SOF5  0xC5		/* NB: codes C4 and CC are NOT SOF markers */
+#define M_SOF6  0xC6
+#define M_SOF7  0xC7
+#define M_SOF9  0xC9
+#define M_SOF10 0xCA
+#define M_SOF11 0xCB
+#define M_SOF13 0xCD
+#define M_SOF14 0xCE
+#define M_SOF15 0xCF
+#define M_SOI   0xD8		/* Start Of Image (beginning of datastream) */
+#define M_EOI   0xD9		/* End Of Image (end of datastream) */
+#define M_SOS   0xDA		/* Start Of Scan (begins compressed data) */
+#define M_APP0	0xE0		/* Application-specific marker, type N */
+#define M_APP12	0xEC		/* (we don't bother to list all 16 APPn's) */
+#define M_COM   0xFE		/* COMment */
+
+
+/*
+ * Find the next JPEG marker and return its marker code.
+ * We expect at least one FF byte, possibly more if the compressor used FFs
+ * to pad the file.
+ * There could also be non-FF garbage between markers.  The treatment of such
+ * garbage is unspecified; we choose to skip over it but emit a warning msg.
+ * NB: this routine must not be used after seeing SOS marker, since it will
+ * not deal correctly with FF/00 sequences in the compressed image data...
+ */
+
+static int
+next_marker (void)
+{
+  int c;
+  int discarded_bytes = 0;
+
+  /* Find 0xFF byte; count and skip any non-FFs. */
+  c = read_1_byte();
+  while (c != 0xFF) {
+    discarded_bytes++;
+    c = read_1_byte();
+  }
+  /* Get marker code byte, swallowing any duplicate FF bytes.  Extra FFs
+   * are legal as pad bytes, so don't count them in discarded_bytes.
+   */
+  do {
+    c = read_1_byte();
+  } while (c == 0xFF);
+
+  if (discarded_bytes != 0) {
+    fprintf(stderr, "Warning: garbage data found in JPEG file\n");
+  }
+
+  return c;
+}
+
+
+/*
+ * Read the initial marker, which should be SOI.
+ * For a JFIF file, the first two bytes of the file should be literally
+ * 0xFF M_SOI.  To be more general, we could use next_marker, but if the
+ * input file weren't actually JPEG at all, next_marker might read the whole
+ * file and then return a misleading error message...
+ */
+
+static int
+first_marker (void)
+{
+  int c1, c2;
+
+  c1 = NEXTBYTE();
+  c2 = NEXTBYTE();
+  if (c1 != 0xFF || c2 != M_SOI)
+    ERREXIT("Not a JPEG file");
+  return c2;
+}
+
+
+/*
+ * Most types of marker are followed by a variable-length parameter segment.
+ * This routine skips over the parameters for any marker we don't otherwise
+ * want to process.
+ * Note that we MUST skip the parameter segment explicitly in order not to
+ * be fooled by 0xFF bytes that might appear within the parameter segment;
+ * such bytes do NOT introduce new markers.
+ */
+
+static void
+skip_variable (void)
+/* Skip over an unknown or uninteresting variable-length marker */
+{
+  unsigned int length;
+
+  /* Get the marker parameter length count */
+  length = read_2_bytes();
+  /* Length includes itself, so must be at least 2 */
+  if (length < 2)
+    ERREXIT("Erroneous JPEG marker length");
+  length -= 2;
+  /* Skip over the remaining bytes */
+  while (length > 0) {
+    (void) read_1_byte();
+    length--;
+  }
+}
+
+
+/*
+ * Process a COM marker.
+ * We want to print out the marker contents as legible text;
+ * we must guard against non-text junk and varying newline representations.
+ */
+
+static void
+process_COM (int raw)
+{
+  unsigned int length;
+  int ch;
+  int lastch = 0;
+
+  /* Bill Allombert: set locale properly for isprint */
+#ifdef HAVE_LOCALE_H
+  setlocale(LC_CTYPE, "");
+#endif
+
+  /* Get the marker parameter length count */
+  length = read_2_bytes();
+  /* Length includes itself, so must be at least 2 */
+  if (length < 2)
+    ERREXIT("Erroneous JPEG marker length");
+  length -= 2;
+
+  while (length > 0) {
+    ch = read_1_byte();
+    if (raw) {
+      putc(ch, stdout);
+    /* Emit the character in a readable form.
+     * Nonprintables are converted to \nnn form,
+     * while \ is converted to \\.
+     * Newlines in CR, CR/LF, or LF form will be printed as one newline.
+     */
+    } else if (ch == '\r') {
+      printf("\n");
+    } else if (ch == '\n') {
+      if (lastch != '\r')
+	printf("\n");
+    } else if (ch == '\\') {
+      printf("\\\\");
+    } else if (isprint(ch)) {
+      putc(ch, stdout);
+    } else {
+      printf("\\%03o", ch);
+    }
+    lastch = ch;
+    length--;
+  }
+  printf("\n");
+
+  /* Bill Allombert: revert to C locale */
+#ifdef HAVE_LOCALE_H
+  setlocale(LC_CTYPE, "C");
+#endif
+}
+
+
+/*
+ * Process a SOFn marker.
+ * This code is only needed if you want to know the image dimensions...
+ */
+
+static void
+process_SOFn (int marker)
+{
+  unsigned int length;
+  unsigned int image_height, image_width;
+  int data_precision, num_components;
+  const char * process;
+  int ci;
+
+  length = read_2_bytes();	/* usual parameter length count */
+
+  data_precision = read_1_byte();
+  image_height = read_2_bytes();
+  image_width = read_2_bytes();
+  num_components = read_1_byte();
+
+  switch (marker) {
+  case M_SOF0:	process = "Baseline";  break;
+  case M_SOF1:	process = "Extended sequential";  break;
+  case M_SOF2:	process = "Progressive";  break;
+  case M_SOF3:	process = "Lossless";  break;
+  case M_SOF5:	process = "Differential sequential";  break;
+  case M_SOF6:	process = "Differential progressive";  break;
+  case M_SOF7:	process = "Differential lossless";  break;
+  case M_SOF9:	process = "Extended sequential, arithmetic coding";  break;
+  case M_SOF10:	process = "Progressive, arithmetic coding";  break;
+  case M_SOF11:	process = "Lossless, arithmetic coding";  break;
+  case M_SOF13:	process = "Differential sequential, arithmetic coding";  break;
+  case M_SOF14:	process = "Differential progressive, arithmetic coding"; break;
+  case M_SOF15:	process = "Differential lossless, arithmetic coding";  break;
+  default:	process = "Unknown";  break;
+  }
+
+  printf("JPEG image is %uw * %uh, %d color components, %d bits per sample\n",
+	 image_width, image_height, num_components, data_precision);
+  printf("JPEG process: %s\n", process);
+
+  if (length != (unsigned int) (8 + num_components * 3))
+    ERREXIT("Bogus SOF marker length");
+
+  for (ci = 0; ci < num_components; ci++) {
+    (void) read_1_byte();	/* Component ID code */
+    (void) read_1_byte();	/* H, V sampling factors */
+    (void) read_1_byte();	/* Quantization table number */
+  }
+}
+
+
+/*
+ * Parse the marker stream until SOS or EOI is seen;
+ * display any COM markers.
+ * While the companion program wrjpgcom will always insert COM markers before
+ * SOFn, other implementations might not, so we scan to SOS before stopping.
+ * If we were only interested in the image dimensions, we would stop at SOFn.
+ * (Conversely, if we only cared about COM markers, there would be no need
+ * for special code to handle SOFn; we could treat it like other markers.)
+ */
+
+static int
+scan_JPEG_header (int verbose, int raw)
+{
+  int marker;
+
+  /* Expect SOI at start of file */
+  if (first_marker() != M_SOI)
+    ERREXIT("Expected SOI marker first");
+
+  /* Scan miscellaneous markers until we reach SOS. */
+  for (;;) {
+    marker = next_marker();
+    switch (marker) {
+      /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be,
+       * treated as SOFn.  C4 in particular is actually DHT.
+       */
+    case M_SOF0:		/* Baseline */
+    case M_SOF1:		/* Extended sequential, Huffman */
+    case M_SOF2:		/* Progressive, Huffman */
+    case M_SOF3:		/* Lossless, Huffman */
+    case M_SOF5:		/* Differential sequential, Huffman */
+    case M_SOF6:		/* Differential progressive, Huffman */
+    case M_SOF7:		/* Differential lossless, Huffman */
+    case M_SOF9:		/* Extended sequential, arithmetic */
+    case M_SOF10:		/* Progressive, arithmetic */
+    case M_SOF11:		/* Lossless, arithmetic */
+    case M_SOF13:		/* Differential sequential, arithmetic */
+    case M_SOF14:		/* Differential progressive, arithmetic */
+    case M_SOF15:		/* Differential lossless, arithmetic */
+      if (verbose)
+	process_SOFn(marker);
+      else
+	skip_variable();
+      break;
+
+    case M_SOS:			/* stop before hitting compressed data */
+      return marker;
+
+    case M_EOI:			/* in case it's a tables-only JPEG stream */
+      return marker;
+
+    case M_COM:
+      process_COM(raw);
+      break;
+
+    case M_APP12:
+      /* Some digital camera makers put useful textual information into
+       * APP12 markers, so we print those out too when in -verbose mode.
+       */
+      if (verbose) {
+	printf("APP12 contains:\n");
+	process_COM(raw);
+      } else
+	skip_variable();
+      break;
+
+    default:			/* Anything else just gets skipped */
+      skip_variable();		/* we assume it has a parameter count... */
+      break;
+    }
+  } /* end loop */
+}
+
+
+/* Command line parsing code */
+
+static const char * progname;	/* program name for error messages */
+
+
+static void
+usage (void)
+/* complain about bad command line */
+{
+  fprintf(stderr, "rdjpgcom displays any textual comments in a JPEG file.\n");
+
+  fprintf(stderr, "Usage: %s [switches] [inputfile]\n", progname);
+
+  fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -raw        Display non-printable characters in comments (unsafe)\n");
+  fprintf(stderr, "  -verbose    Also display dimensions of JPEG image\n");
+
+  exit(EXIT_FAILURE);
+}
+
+
+static int
+keymatch (char * arg, const char * keyword, int minchars)
+/* Case-insensitive matching of (possibly abbreviated) keyword switches. */
+/* keyword is the constant keyword (must be lower case already), */
+/* minchars is length of minimum legal abbreviation. */
+{
+  register int ca, ck;
+  register int nmatched = 0;
+
+  while ((ca = *arg++) != '\0') {
+    if ((ck = *keyword++) == '\0')
+      return 0;			/* arg longer than keyword, no good */
+    if (isupper(ca))		/* force arg to lcase (assume ck is already) */
+      ca = tolower(ca);
+    if (ca != ck)
+      return 0;			/* no good */
+    nmatched++;			/* count matched characters */
+  }
+  /* reached end of argument; fail if it's too short for unique abbrev */
+  if (nmatched < minchars)
+    return 0;
+  return 1;			/* A-OK */
+}
+
+
+/*
+ * The main program.
+ */
+
+int
+main (int argc, char **argv)
+{
+  int argn;
+  char * arg;
+  int verbose = 0, raw = 0;
+
+  /* On Mac, fetch a command line. */
+#ifdef USE_CCOMMAND
+  argc = ccommand(&argv);
+#endif
+
+  progname = argv[0];
+  if (progname == NULL || progname[0] == 0)
+    progname = "rdjpgcom";	/* in case C library doesn't provide it */
+
+  /* Parse switches, if any */
+  for (argn = 1; argn < argc; argn++) {
+    arg = argv[argn];
+    if (arg[0] != '-')
+      break;			/* not switch, must be file name */
+    arg++;			/* advance over '-' */
+    if (keymatch(arg, "verbose", 1)) {
+      verbose++;
+    } else if (keymatch(arg, "raw", 1)) {
+      raw = 1;
+    } else
+      usage();
+  }
+
+  /* Open the input file. */
+  /* Unix style: expect zero or one file name */
+  if (argn < argc-1) {
+    fprintf(stderr, "%s: only one input file\n", progname);
+    usage();
+  }
+  if (argn < argc) {
+    if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default input file is stdin */
+#ifdef USE_SETMODE		/* need to hack file mode? */
+    setmode(fileno(stdin), O_BINARY);
+#endif
+#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
+    if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open stdin\n", progname);
+      exit(EXIT_FAILURE);
+    }
+#else
+    infile = stdin;
+#endif
+  }
+
+  /* Scan the JPEG headers. */
+  (void) scan_JPEG_header(verbose, raw);
+
+  /* All done. */
+  exit(EXIT_SUCCESS);
+  return 0;			/* suppress no-return-value warnings */
+}
diff --git a/jpeg-8d/rdppm.c b/jpeg-8d/rdppm.c
new file mode 100644
index 0000000..a757022
--- /dev/null
+++ b/jpeg-8d/rdppm.c
@@ -0,0 +1,459 @@
+/*
+ * rdppm.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2009 by Bill Allombert, Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to read input images in PPM/PGM format.
+ * The extended 2-byte-per-sample raw PPM/PGM formats are supported.
+ * The PBMPLUS library is NOT required to compile this software
+ * (but it is highly useful as a set of PPM image manipulation programs).
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume input from
+ * an ordinary stdio stream.  They further assume that reading begins
+ * at the start of the file; start_input may need work if the
+ * user interface has already read some data (e.g., to determine that
+ * the file is indeed PPM format).
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef PPM_SUPPORTED
+
+
+/* Portions of this code are based on the PBMPLUS library, which is:
+**
+** Copyright (C) 1988 by Jef Poskanzer.
+**
+** Permission to use, copy, modify, and distribute this software and its
+** documentation for any purpose and without fee is hereby granted, provided
+** that the above copyright notice appear in all copies and that both that
+** copyright notice and this permission notice appear in supporting
+** documentation.  This software is provided "as is" without express or
+** implied warranty.
+*/
+
+
+/* Macros to deal with unsigned chars as efficiently as compiler allows */
+
+#ifdef HAVE_UNSIGNED_CHAR
+typedef unsigned char U_CHAR;
+#define UCH(x)	((int) (x))
+#else /* !HAVE_UNSIGNED_CHAR */
+#ifdef CHAR_IS_UNSIGNED
+typedef char U_CHAR;
+#define UCH(x)	((int) (x))
+#else
+typedef char U_CHAR;
+#define UCH(x)	((int) (x) & 0xFF)
+#endif
+#endif /* HAVE_UNSIGNED_CHAR */
+
+
+#define	ReadOK(file,buffer,len)	(JFREAD(file,buffer,len) == ((size_t) (len)))
+
+
+/*
+ * On most systems, reading individual bytes with getc() is drastically less
+ * efficient than buffering a row at a time with fread().  On PCs, we must
+ * allocate the buffer in near data space, because we are assuming small-data
+ * memory model, wherein fread() can't reach far memory.  If you need to
+ * process very wide images on a PC, you might have to compile in large-memory
+ * model, or else replace fread() with a getc() loop --- which will be much
+ * slower.
+ */
+
+
+/* Private version of data source object */
+
+typedef struct {
+  struct cjpeg_source_struct pub; /* public fields */
+
+  U_CHAR *iobuffer;		/* non-FAR pointer to I/O buffer */
+  JSAMPROW pixrow;		/* FAR pointer to same */
+  size_t buffer_width;		/* width of I/O buffer */
+  JSAMPLE *rescale;		/* => maxval-remapping array, or NULL */
+} ppm_source_struct;
+
+typedef ppm_source_struct * ppm_source_ptr;
+
+
+LOCAL(int)
+pbm_getc (FILE * infile)
+/* Read next char, skipping over any comments */
+/* A comment/newline sequence is returned as a newline */
+{
+  register int ch;
+
+  ch = getc(infile);
+  if (ch == '#') {
+    do {
+      ch = getc(infile);
+    } while (ch != '\n' && ch != EOF);
+  }
+  return ch;
+}
+
+
+LOCAL(unsigned int)
+read_pbm_integer (j_compress_ptr cinfo, FILE * infile)
+/* Read an unsigned decimal integer from the PPM file */
+/* Swallows one trailing character after the integer */
+/* Note that on a 16-bit-int machine, only values up to 64k can be read. */
+/* This should not be a problem in practice. */
+{
+  register int ch;
+  register unsigned int val;
+
+  /* Skip any leading whitespace */
+  do {
+    ch = pbm_getc(infile);
+    if (ch == EOF)
+      ERREXIT(cinfo, JERR_INPUT_EOF);
+  } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r');
+
+  if (ch < '0' || ch > '9')
+    ERREXIT(cinfo, JERR_PPM_NONNUMERIC);
+
+  val = ch - '0';
+  while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') {
+    val *= 10;
+    val += ch - '0';
+  }
+  return val;
+}
+
+
+/*
+ * Read one row of pixels.
+ *
+ * We provide several different versions depending on input file format.
+ * In all cases, input is scaled to the size of JSAMPLE.
+ *
+ * A really fast path is provided for reading byte/sample raw files with
+ * maxval = MAXJSAMPLE, which is the normal case for 8-bit data.
+ */
+
+
+METHODDEF(JDIMENSION)
+get_text_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading text-format PGM files with any maxval */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  FILE * infile = source->pub.input_file;
+  register JSAMPROW ptr;
+  register JSAMPLE *rescale = source->rescale;
+  JDIMENSION col;
+
+  ptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
+  }
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_text_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading text-format PPM files with any maxval */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  FILE * infile = source->pub.input_file;
+  register JSAMPROW ptr;
+  register JSAMPLE *rescale = source->rescale;
+  JDIMENSION col;
+
+  ptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
+    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
+    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
+  }
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_scaled_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading raw-byte-format PGM files with any maxval */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  register JSAMPROW ptr;
+  register U_CHAR * bufferptr;
+  register JSAMPLE *rescale = source->rescale;
+  JDIMENSION col;
+
+  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  ptr = source->pub.buffer[0];
+  bufferptr = source->iobuffer;
+  for (col = cinfo->image_width; col > 0; col--) {
+    *ptr++ = rescale[UCH(*bufferptr++)];
+  }
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_scaled_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading raw-byte-format PPM files with any maxval */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  register JSAMPROW ptr;
+  register U_CHAR * bufferptr;
+  register JSAMPLE *rescale = source->rescale;
+  JDIMENSION col;
+
+  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  ptr = source->pub.buffer[0];
+  bufferptr = source->iobuffer;
+  for (col = cinfo->image_width; col > 0; col--) {
+    *ptr++ = rescale[UCH(*bufferptr++)];
+    *ptr++ = rescale[UCH(*bufferptr++)];
+    *ptr++ = rescale[UCH(*bufferptr++)];
+  }
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_raw_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading raw-byte-format files with maxval = MAXJSAMPLE.
+ * In this case we just read right into the JSAMPLE buffer!
+ * Note that same code works for PPM and PGM files.
+ */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+
+  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_word_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading raw-word-format PGM files with any maxval */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  register JSAMPROW ptr;
+  register U_CHAR * bufferptr;
+  register JSAMPLE *rescale = source->rescale;
+  JDIMENSION col;
+
+  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  ptr = source->pub.buffer[0];
+  bufferptr = source->iobuffer;
+  for (col = cinfo->image_width; col > 0; col--) {
+    register int temp;
+    temp  = UCH(*bufferptr++) << 8;
+    temp |= UCH(*bufferptr++);
+    *ptr++ = rescale[temp];
+  }
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_word_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading raw-word-format PPM files with any maxval */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  register JSAMPROW ptr;
+  register U_CHAR * bufferptr;
+  register JSAMPLE *rescale = source->rescale;
+  JDIMENSION col;
+
+  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  ptr = source->pub.buffer[0];
+  bufferptr = source->iobuffer;
+  for (col = cinfo->image_width; col > 0; col--) {
+    register int temp;
+    temp  = UCH(*bufferptr++) << 8;
+    temp |= UCH(*bufferptr++);
+    *ptr++ = rescale[temp];
+    temp  = UCH(*bufferptr++) << 8;
+    temp |= UCH(*bufferptr++);
+    *ptr++ = rescale[temp];
+    temp  = UCH(*bufferptr++) << 8;
+    temp |= UCH(*bufferptr++);
+    *ptr++ = rescale[temp];
+  }
+  return 1;
+}
+
+
+/*
+ * Read the file header; return image size and component count.
+ */
+
+METHODDEF(void)
+start_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  int c;
+  unsigned int w, h, maxval;
+  boolean need_iobuffer, use_raw_buffer, need_rescale;
+
+  if (getc(source->pub.input_file) != 'P')
+    ERREXIT(cinfo, JERR_PPM_NOT);
+
+  c = getc(source->pub.input_file); /* subformat discriminator character */
+
+  /* detect unsupported variants (ie, PBM) before trying to read header */
+  switch (c) {
+  case '2':			/* it's a text-format PGM file */
+  case '3':			/* it's a text-format PPM file */
+  case '5':			/* it's a raw-format PGM file */
+  case '6':			/* it's a raw-format PPM file */
+    break;
+  default:
+    ERREXIT(cinfo, JERR_PPM_NOT);
+    break;
+  }
+
+  /* fetch the remaining header info */
+  w = read_pbm_integer(cinfo, source->pub.input_file);
+  h = read_pbm_integer(cinfo, source->pub.input_file);
+  maxval = read_pbm_integer(cinfo, source->pub.input_file);
+
+  if (w <= 0 || h <= 0 || maxval <= 0) /* error check */
+    ERREXIT(cinfo, JERR_PPM_NOT);
+
+  cinfo->data_precision = BITS_IN_JSAMPLE; /* we always rescale data to this */
+  cinfo->image_width = (JDIMENSION) w;
+  cinfo->image_height = (JDIMENSION) h;
+
+  /* initialize flags to most common settings */
+  need_iobuffer = TRUE;		/* do we need an I/O buffer? */
+  use_raw_buffer = FALSE;	/* do we map input buffer onto I/O buffer? */
+  need_rescale = TRUE;		/* do we need a rescale array? */
+
+  switch (c) {
+  case '2':			/* it's a text-format PGM file */
+    cinfo->input_components = 1;
+    cinfo->in_color_space = JCS_GRAYSCALE;
+    TRACEMS2(cinfo, 1, JTRC_PGM_TEXT, w, h);
+    source->pub.get_pixel_rows = get_text_gray_row;
+    need_iobuffer = FALSE;
+    break;
+
+  case '3':			/* it's a text-format PPM file */
+    cinfo->input_components = 3;
+    cinfo->in_color_space = JCS_RGB;
+    TRACEMS2(cinfo, 1, JTRC_PPM_TEXT, w, h);
+    source->pub.get_pixel_rows = get_text_rgb_row;
+    need_iobuffer = FALSE;
+    break;
+
+  case '5':			/* it's a raw-format PGM file */
+    cinfo->input_components = 1;
+    cinfo->in_color_space = JCS_GRAYSCALE;
+    TRACEMS2(cinfo, 1, JTRC_PGM, w, h);
+    if (maxval > 255) {
+      source->pub.get_pixel_rows = get_word_gray_row;
+    } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) {
+      source->pub.get_pixel_rows = get_raw_row;
+      use_raw_buffer = TRUE;
+      need_rescale = FALSE;
+    } else {
+      source->pub.get_pixel_rows = get_scaled_gray_row;
+    }
+    break;
+
+  case '6':			/* it's a raw-format PPM file */
+    cinfo->input_components = 3;
+    cinfo->in_color_space = JCS_RGB;
+    TRACEMS2(cinfo, 1, JTRC_PPM, w, h);
+    if (maxval > 255) {
+      source->pub.get_pixel_rows = get_word_rgb_row;
+    } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) {
+      source->pub.get_pixel_rows = get_raw_row;
+      use_raw_buffer = TRUE;
+      need_rescale = FALSE;
+    } else {
+      source->pub.get_pixel_rows = get_scaled_rgb_row;
+    }
+    break;
+  }
+
+  /* Allocate space for I/O buffer: 1 or 3 bytes or words/pixel. */
+  if (need_iobuffer) {
+    source->buffer_width = (size_t) w * cinfo->input_components *
+      ((maxval<=255) ? SIZEOF(U_CHAR) : (2*SIZEOF(U_CHAR)));
+    source->iobuffer = (U_CHAR *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  source->buffer_width);
+  }
+
+  /* Create compressor input buffer. */
+  if (use_raw_buffer) {
+    /* For unscaled raw-input case, we can just map it onto the I/O buffer. */
+    /* Synthesize a JSAMPARRAY pointer structure */
+    /* Cast here implies near->far pointer conversion on PCs */
+    source->pixrow = (JSAMPROW) source->iobuffer;
+    source->pub.buffer = & source->pixrow;
+    source->pub.buffer_height = 1;
+  } else {
+    /* Need to translate anyway, so make a separate sample buffer. */
+    source->pub.buffer = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (JDIMENSION) w * cinfo->input_components, (JDIMENSION) 1);
+    source->pub.buffer_height = 1;
+  }
+
+  /* Compute the rescaling array if required. */
+  if (need_rescale) {
+    INT32 val, half_maxval;
+
+    /* On 16-bit-int machines we have to be careful of maxval = 65535 */
+    source->rescale = (JSAMPLE *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  (size_t) (((long) maxval + 1L) * SIZEOF(JSAMPLE)));
+    half_maxval = maxval / 2;
+    for (val = 0; val <= (INT32) maxval; val++) {
+      /* The multiplication here must be done in 32 bits to avoid overflow */
+      source->rescale[val] = (JSAMPLE) ((val*MAXJSAMPLE + half_maxval)/maxval);
+    }
+  }
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  /* no work */
+}
+
+
+/*
+ * The module selection routine for PPM format input.
+ */
+
+GLOBAL(cjpeg_source_ptr)
+jinit_read_ppm (j_compress_ptr cinfo)
+{
+  ppm_source_ptr source;
+
+  /* Create module interface object */
+  source = (ppm_source_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(ppm_source_struct));
+  /* Fill in method ptrs, except get_pixel_rows which start_input sets */
+  source->pub.start_input = start_input_ppm;
+  source->pub.finish_input = finish_input_ppm;
+
+  return (cjpeg_source_ptr) source;
+}
+
+#endif /* PPM_SUPPORTED */
diff --git a/jpeg-8d/rdrle.c b/jpeg-8d/rdrle.c
new file mode 100644
index 0000000..542bc37
--- /dev/null
+++ b/jpeg-8d/rdrle.c
@@ -0,0 +1,387 @@
+/*
+ * rdrle.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to read input images in Utah RLE format.
+ * The Utah Raster Toolkit library is required (version 3.1 or later).
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume input from
+ * an ordinary stdio stream.  They further assume that reading begins
+ * at the start of the file; start_input may need work if the
+ * user interface has already read some data (e.g., to determine that
+ * the file is indeed RLE format).
+ *
+ * Based on code contributed by Mike Lijewski,
+ * with updates from Robert Hutchinson.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef RLE_SUPPORTED
+
+/* rle.h is provided by the Utah Raster Toolkit. */
+
+#include <rle.h>
+
+/*
+ * We assume that JSAMPLE has the same representation as rle_pixel,
+ * to wit, "unsigned char".  Hence we can't cope with 12- or 16-bit samples.
+ */
+
+#if BITS_IN_JSAMPLE != 8
+  Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
+#endif
+
+/*
+ * We support the following types of RLE files:
+ *   
+ *   GRAYSCALE   - 8 bits, no colormap
+ *   MAPPEDGRAY  - 8 bits, 1 channel colomap
+ *   PSEUDOCOLOR - 8 bits, 3 channel colormap
+ *   TRUECOLOR   - 24 bits, 3 channel colormap
+ *   DIRECTCOLOR - 24 bits, no colormap
+ *
+ * For now, we ignore any alpha channel in the image.
+ */
+
+typedef enum
+  { GRAYSCALE, MAPPEDGRAY, PSEUDOCOLOR, TRUECOLOR, DIRECTCOLOR } rle_kind;
+
+
+/*
+ * Since RLE stores scanlines bottom-to-top, we have to invert the image
+ * to conform to JPEG's top-to-bottom order.  To do this, we read the
+ * incoming image into a virtual array on the first get_pixel_rows call,
+ * then fetch the required row from the virtual array on subsequent calls.
+ */
+
+typedef struct _rle_source_struct * rle_source_ptr;
+
+typedef struct _rle_source_struct {
+  struct cjpeg_source_struct pub; /* public fields */
+
+  rle_kind visual;              /* actual type of input file */
+  jvirt_sarray_ptr image;       /* virtual array to hold the image */
+  JDIMENSION row;		/* current row # in the virtual array */
+  rle_hdr header;               /* Input file information */
+  rle_pixel** rle_row;          /* holds a row returned by rle_getrow() */
+
+} rle_source_struct;
+
+
+/*
+ * Read the file header; return image size and component count.
+ */
+
+METHODDEF(void)
+start_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  rle_source_ptr source = (rle_source_ptr) sinfo;
+  JDIMENSION width, height;
+#ifdef PROGRESS_REPORT
+  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+#endif
+
+  /* Use RLE library routine to get the header info */
+  source->header = *rle_hdr_init(NULL);
+  source->header.rle_file = source->pub.input_file;
+  switch (rle_get_setup(&(source->header))) {
+  case RLE_SUCCESS:
+    /* A-OK */
+    break;
+  case RLE_NOT_RLE:
+    ERREXIT(cinfo, JERR_RLE_NOT);
+    break;
+  case RLE_NO_SPACE:
+    ERREXIT(cinfo, JERR_RLE_MEM);
+    break;
+  case RLE_EMPTY:
+    ERREXIT(cinfo, JERR_RLE_EMPTY);
+    break;
+  case RLE_EOF:
+    ERREXIT(cinfo, JERR_RLE_EOF);
+    break;
+  default:
+    ERREXIT(cinfo, JERR_RLE_BADERROR);
+    break;
+  }
+
+  /* Figure out what we have, set private vars and return values accordingly */
+  
+  width  = source->header.xmax - source->header.xmin + 1;
+  height = source->header.ymax - source->header.ymin + 1;
+  source->header.xmin = 0;		/* realign horizontally */
+  source->header.xmax = width-1;
+
+  cinfo->image_width      = width;
+  cinfo->image_height     = height;
+  cinfo->data_precision   = 8;  /* we can only handle 8 bit data */
+
+  if (source->header.ncolors == 1 && source->header.ncmap == 0) {
+    source->visual     = GRAYSCALE;
+    TRACEMS2(cinfo, 1, JTRC_RLE_GRAY, width, height);
+  } else if (source->header.ncolors == 1 && source->header.ncmap == 1) {
+    source->visual     = MAPPEDGRAY;
+    TRACEMS3(cinfo, 1, JTRC_RLE_MAPGRAY, width, height,
+             1 << source->header.cmaplen);
+  } else if (source->header.ncolors == 1 && source->header.ncmap == 3) {
+    source->visual     = PSEUDOCOLOR;
+    TRACEMS3(cinfo, 1, JTRC_RLE_MAPPED, width, height,
+	     1 << source->header.cmaplen);
+  } else if (source->header.ncolors == 3 && source->header.ncmap == 3) {
+    source->visual     = TRUECOLOR;
+    TRACEMS3(cinfo, 1, JTRC_RLE_FULLMAP, width, height,
+	     1 << source->header.cmaplen);
+  } else if (source->header.ncolors == 3 && source->header.ncmap == 0) {
+    source->visual     = DIRECTCOLOR;
+    TRACEMS2(cinfo, 1, JTRC_RLE, width, height);
+  } else
+    ERREXIT(cinfo, JERR_RLE_UNSUPPORTED);
+  
+  if (source->visual == GRAYSCALE || source->visual == MAPPEDGRAY) {
+    cinfo->in_color_space   = JCS_GRAYSCALE;
+    cinfo->input_components = 1;
+  } else {
+    cinfo->in_color_space   = JCS_RGB;
+    cinfo->input_components = 3;
+  }
+
+  /*
+   * A place to hold each scanline while it's converted.
+   * (GRAYSCALE scanlines don't need converting)
+   */
+  if (source->visual != GRAYSCALE) {
+    source->rle_row = (rle_pixel**) (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (JDIMENSION) width, (JDIMENSION) cinfo->input_components);
+  }
+
+  /* request a virtual array to hold the image */
+  source->image = (*cinfo->mem->request_virt_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+     (JDIMENSION) (width * source->header.ncolors),
+     (JDIMENSION) height, (JDIMENSION) 1);
+
+#ifdef PROGRESS_REPORT
+  if (progress != NULL) {
+    /* count file input as separate pass */
+    progress->total_extra_passes++;
+  }
+#endif
+
+  source->pub.buffer_height = 1;
+}
+
+
+/*
+ * Read one row of pixels.
+ * Called only after load_image has read the image into the virtual array.
+ * Used for GRAYSCALE, MAPPEDGRAY, TRUECOLOR, and DIRECTCOLOR images.
+ */
+
+METHODDEF(JDIMENSION)
+get_rle_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  rle_source_ptr source = (rle_source_ptr) sinfo;
+
+  source->row--;
+  source->pub.buffer = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE);
+
+  return 1;
+}
+
+/*
+ * Read one row of pixels.
+ * Called only after load_image has read the image into the virtual array.
+ * Used for PSEUDOCOLOR images.
+ */
+
+METHODDEF(JDIMENSION)
+get_pseudocolor_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  rle_source_ptr source = (rle_source_ptr) sinfo;
+  JSAMPROW src_row, dest_row;
+  JDIMENSION col;
+  rle_map *colormap;
+  int val;
+
+  colormap = source->header.cmap;
+  dest_row = source->pub.buffer[0];
+  source->row--;
+  src_row = * (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE);
+
+  for (col = cinfo->image_width; col > 0; col--) {
+    val = GETJSAMPLE(*src_row++);
+    *dest_row++ = (JSAMPLE) (colormap[val      ] >> 8);
+    *dest_row++ = (JSAMPLE) (colormap[val + 256] >> 8);
+    *dest_row++ = (JSAMPLE) (colormap[val + 512] >> 8);
+  }
+
+  return 1;
+}
+
+
+/*
+ * Load the image into a virtual array.  We have to do this because RLE
+ * files start at the lower left while the JPEG standard has them starting
+ * in the upper left.  This is called the first time we want to get a row
+ * of input.  What we do is load the RLE data into the array and then call
+ * the appropriate routine to read one row from the array.  Before returning,
+ * we set source->pub.get_pixel_rows so that subsequent calls go straight to
+ * the appropriate row-reading routine.
+ */
+
+METHODDEF(JDIMENSION)
+load_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  rle_source_ptr source = (rle_source_ptr) sinfo;
+  JDIMENSION row, col;
+  JSAMPROW  scanline, red_ptr, green_ptr, blue_ptr;
+  rle_pixel **rle_row;
+  rle_map *colormap;
+  char channel;
+#ifdef PROGRESS_REPORT
+  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+#endif
+
+  colormap = source->header.cmap;
+  rle_row = source->rle_row;
+
+  /* Read the RLE data into our virtual array.
+   * We assume here that (a) rle_pixel is represented the same as JSAMPLE,
+   * and (b) we are not on a machine where FAR pointers differ from regular.
+   */
+  RLE_CLR_BIT(source->header, RLE_ALPHA); /* don't read the alpha channel */
+
+#ifdef PROGRESS_REPORT
+  if (progress != NULL) {
+    progress->pub.pass_limit = cinfo->image_height;
+    progress->pub.pass_counter = 0;
+    (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+  }
+#endif
+
+  switch (source->visual) {
+
+  case GRAYSCALE:
+  case PSEUDOCOLOR:
+    for (row = 0; row < cinfo->image_height; row++) {
+      rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray)
+         ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE);
+      rle_getrow(&source->header, rle_row);
+#ifdef PROGRESS_REPORT
+      if (progress != NULL) {
+        progress->pub.pass_counter++;
+        (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+      }
+#endif
+    }
+    break;
+
+  case MAPPEDGRAY:
+  case TRUECOLOR:
+    for (row = 0; row < cinfo->image_height; row++) {
+      scanline = * (*cinfo->mem->access_virt_sarray)
+        ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE);
+      rle_row = source->rle_row;
+      rle_getrow(&source->header, rle_row);
+
+      for (col = 0; col < cinfo->image_width; col++) {
+        for (channel = 0; channel < source->header.ncolors; channel++) {
+          *scanline++ = (JSAMPLE)
+            (colormap[GETJSAMPLE(rle_row[channel][col]) + 256 * channel] >> 8);
+        }
+      }
+
+#ifdef PROGRESS_REPORT
+      if (progress != NULL) {
+        progress->pub.pass_counter++;
+        (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+      }
+#endif
+    }
+    break;
+
+  case DIRECTCOLOR:
+    for (row = 0; row < cinfo->image_height; row++) {
+      scanline = * (*cinfo->mem->access_virt_sarray)
+        ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE);
+      rle_getrow(&source->header, rle_row);
+
+      red_ptr   = rle_row[0];
+      green_ptr = rle_row[1];
+      blue_ptr  = rle_row[2];
+
+      for (col = cinfo->image_width; col > 0; col--) {
+        *scanline++ = *red_ptr++;
+        *scanline++ = *green_ptr++;
+        *scanline++ = *blue_ptr++;
+      }
+
+#ifdef PROGRESS_REPORT
+      if (progress != NULL) {
+        progress->pub.pass_counter++;
+        (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+      }
+#endif
+    }
+  }
+
+#ifdef PROGRESS_REPORT
+  if (progress != NULL)
+    progress->completed_extra_passes++;
+#endif
+
+  /* Set up to call proper row-extraction routine in future */
+  if (source->visual == PSEUDOCOLOR) {
+    source->pub.buffer = source->rle_row;
+    source->pub.get_pixel_rows = get_pseudocolor_row;
+  } else {
+    source->pub.get_pixel_rows = get_rle_row;
+  }
+  source->row = cinfo->image_height;
+
+  /* And fetch the topmost (bottommost) row */
+  return (*source->pub.get_pixel_rows) (cinfo, sinfo);   
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  /* no work */
+}
+
+
+/*
+ * The module selection routine for RLE format input.
+ */
+
+GLOBAL(cjpeg_source_ptr)
+jinit_read_rle (j_compress_ptr cinfo)
+{
+  rle_source_ptr source;
+
+  /* Create module interface object */
+  source = (rle_source_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+                                  SIZEOF(rle_source_struct));
+  /* Fill in method ptrs */
+  source->pub.start_input = start_input_rle;
+  source->pub.finish_input = finish_input_rle;
+  source->pub.get_pixel_rows = load_image;
+
+  return (cjpeg_source_ptr) source;
+}
+
+#endif /* RLE_SUPPORTED */
diff --git a/jpeg-8d/rdswitch.c b/jpeg-8d/rdswitch.c
new file mode 100644
index 0000000..7a839af
--- /dev/null
+++ b/jpeg-8d/rdswitch.c
@@ -0,0 +1,365 @@
+/*
+ * rdswitch.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to process some of cjpeg's more complicated
+ * command-line switches.  Switches processed here are:
+ *	-qtables file		Read quantization tables from text file
+ *	-scans file		Read scan script from text file
+ *	-quality N[,N,...]	Set quality ratings
+ *	-qslots N[,N,...]	Set component quantization table selectors
+ *	-sample HxV[,HxV,...]	Set component sampling factors
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include <ctype.h>		/* to declare isdigit(), isspace() */
+
+
+LOCAL(int)
+text_getc (FILE * file)
+/* Read next char, skipping over any comments (# to end of line) */
+/* A comment/newline sequence is returned as a newline */
+{
+  register int ch;
+  
+  ch = getc(file);
+  if (ch == '#') {
+    do {
+      ch = getc(file);
+    } while (ch != '\n' && ch != EOF);
+  }
+  return ch;
+}
+
+
+LOCAL(boolean)
+read_text_integer (FILE * file, long * result, int * termchar)
+/* Read an unsigned decimal integer from a file, store it in result */
+/* Reads one trailing character after the integer; returns it in termchar */
+{
+  register int ch;
+  register long val;
+  
+  /* Skip any leading whitespace, detect EOF */
+  do {
+    ch = text_getc(file);
+    if (ch == EOF) {
+      *termchar = ch;
+      return FALSE;
+    }
+  } while (isspace(ch));
+  
+  if (! isdigit(ch)) {
+    *termchar = ch;
+    return FALSE;
+  }
+
+  val = ch - '0';
+  while ((ch = text_getc(file)) != EOF) {
+    if (! isdigit(ch))
+      break;
+    val *= 10;
+    val += ch - '0';
+  }
+  *result = val;
+  *termchar = ch;
+  return TRUE;
+}
+
+
+GLOBAL(boolean)
+read_quant_tables (j_compress_ptr cinfo, char * filename, boolean force_baseline)
+/* Read a set of quantization tables from the specified file.
+ * The file is plain ASCII text: decimal numbers with whitespace between.
+ * Comments preceded by '#' may be included in the file.
+ * There may be one to NUM_QUANT_TBLS tables in the file, each of 64 values.
+ * The tables are implicitly numbered 0,1,etc.
+ * NOTE: does not affect the qslots mapping, which will default to selecting
+ * table 0 for luminance (or primary) components, 1 for chrominance components.
+ * You must use -qslots if you want a different component->table mapping.
+ */
+{
+  FILE * fp;
+  int tblno, i, termchar;
+  long val;
+  unsigned int table[DCTSIZE2];
+
+  if ((fp = fopen(filename, "r")) == NULL) {
+    fprintf(stderr, "Can't open table file %s\n", filename);
+    return FALSE;
+  }
+  tblno = 0;
+
+  while (read_text_integer(fp, &val, &termchar)) { /* read 1st element of table */
+    if (tblno >= NUM_QUANT_TBLS) {
+      fprintf(stderr, "Too many tables in file %s\n", filename);
+      fclose(fp);
+      return FALSE;
+    }
+    table[0] = (unsigned int) val;
+    for (i = 1; i < DCTSIZE2; i++) {
+      if (! read_text_integer(fp, &val, &termchar)) {
+	fprintf(stderr, "Invalid table data in file %s\n", filename);
+	fclose(fp);
+	return FALSE;
+      }
+      table[i] = (unsigned int) val;
+    }
+    jpeg_add_quant_table(cinfo, tblno, table, cinfo->q_scale_factor[tblno],
+			 force_baseline);
+    tblno++;
+  }
+
+  if (termchar != EOF) {
+    fprintf(stderr, "Non-numeric data in file %s\n", filename);
+    fclose(fp);
+    return FALSE;
+  }
+
+  fclose(fp);
+  return TRUE;
+}
+
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+
+LOCAL(boolean)
+read_scan_integer (FILE * file, long * result, int * termchar)
+/* Variant of read_text_integer that always looks for a non-space termchar;
+ * this simplifies parsing of punctuation in scan scripts.
+ */
+{
+  register int ch;
+
+  if (! read_text_integer(file, result, termchar))
+    return FALSE;
+  ch = *termchar;
+  while (ch != EOF && isspace(ch))
+    ch = text_getc(file);
+  if (isdigit(ch)) {		/* oops, put it back */
+    if (ungetc(ch, file) == EOF)
+      return FALSE;
+    ch = ' ';
+  } else {
+    /* Any separators other than ';' and ':' are ignored;
+     * this allows user to insert commas, etc, if desired.
+     */
+    if (ch != EOF && ch != ';' && ch != ':')
+      ch = ' ';
+  }
+  *termchar = ch;
+  return TRUE;
+}
+
+
+GLOBAL(boolean)
+read_scan_script (j_compress_ptr cinfo, char * filename)
+/* Read a scan script from the specified text file.
+ * Each entry in the file defines one scan to be emitted.
+ * Entries are separated by semicolons ';'.
+ * An entry contains one to four component indexes,
+ * optionally followed by a colon ':' and four progressive-JPEG parameters.
+ * The component indexes denote which component(s) are to be transmitted
+ * in the current scan.  The first component has index 0.
+ * Sequential JPEG is used if the progressive-JPEG parameters are omitted.
+ * The file is free format text: any whitespace may appear between numbers
+ * and the ':' and ';' punctuation marks.  Also, other punctuation (such
+ * as commas or dashes) can be placed between numbers if desired.
+ * Comments preceded by '#' may be included in the file.
+ * Note: we do very little validity checking here;
+ * jcmaster.c will validate the script parameters.
+ */
+{
+  FILE * fp;
+  int scanno, ncomps, termchar;
+  long val;
+  jpeg_scan_info * scanptr;
+#define MAX_SCANS  100		/* quite arbitrary limit */
+  jpeg_scan_info scans[MAX_SCANS];
+
+  if ((fp = fopen(filename, "r")) == NULL) {
+    fprintf(stderr, "Can't open scan definition file %s\n", filename);
+    return FALSE;
+  }
+  scanptr = scans;
+  scanno = 0;
+
+  while (read_scan_integer(fp, &val, &termchar)) {
+    if (scanno >= MAX_SCANS) {
+      fprintf(stderr, "Too many scans defined in file %s\n", filename);
+      fclose(fp);
+      return FALSE;
+    }
+    scanptr->component_index[0] = (int) val;
+    ncomps = 1;
+    while (termchar == ' ') {
+      if (ncomps >= MAX_COMPS_IN_SCAN) {
+	fprintf(stderr, "Too many components in one scan in file %s\n",
+		filename);
+	fclose(fp);
+	return FALSE;
+      }
+      if (! read_scan_integer(fp, &val, &termchar))
+	goto bogus;
+      scanptr->component_index[ncomps] = (int) val;
+      ncomps++;
+    }
+    scanptr->comps_in_scan = ncomps;
+    if (termchar == ':') {
+      if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ')
+	goto bogus;
+      scanptr->Ss = (int) val;
+      if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ')
+	goto bogus;
+      scanptr->Se = (int) val;
+      if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ')
+	goto bogus;
+      scanptr->Ah = (int) val;
+      if (! read_scan_integer(fp, &val, &termchar))
+	goto bogus;
+      scanptr->Al = (int) val;
+    } else {
+      /* set non-progressive parameters */
+      scanptr->Ss = 0;
+      scanptr->Se = DCTSIZE2-1;
+      scanptr->Ah = 0;
+      scanptr->Al = 0;
+    }
+    if (termchar != ';' && termchar != EOF) {
+bogus:
+      fprintf(stderr, "Invalid scan entry format in file %s\n", filename);
+      fclose(fp);
+      return FALSE;
+    }
+    scanptr++, scanno++;
+  }
+
+  if (termchar != EOF) {
+    fprintf(stderr, "Non-numeric data in file %s\n", filename);
+    fclose(fp);
+    return FALSE;
+  }
+
+  if (scanno > 0) {
+    /* Stash completed scan list in cinfo structure.
+     * NOTE: for cjpeg's use, JPOOL_IMAGE is the right lifetime for this data,
+     * but if you want to compress multiple images you'd want JPOOL_PERMANENT.
+     */
+    scanptr = (jpeg_scan_info *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  scanno * SIZEOF(jpeg_scan_info));
+    MEMCOPY(scanptr, scans, scanno * SIZEOF(jpeg_scan_info));
+    cinfo->scan_info = scanptr;
+    cinfo->num_scans = scanno;
+  }
+
+  fclose(fp);
+  return TRUE;
+}
+
+#endif /* C_MULTISCAN_FILES_SUPPORTED */
+
+
+GLOBAL(boolean)
+set_quality_ratings (j_compress_ptr cinfo, char *arg, boolean force_baseline)
+/* Process a quality-ratings parameter string, of the form
+ *     N[,N,...]
+ * If there are more q-table slots than parameters, the last value is replicated.
+ */
+{
+  int val = 75;			/* default value */
+  int tblno;
+  char ch;
+
+  for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
+    if (*arg) {
+      ch = ',';			/* if not set by sscanf, will be ',' */
+      if (sscanf(arg, "%d%c", &val, &ch) < 1)
+	return FALSE;
+      if (ch != ',')		/* syntax check */
+	return FALSE;
+      /* Convert user 0-100 rating to percentage scaling */
+      cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val);
+      while (*arg && *arg++ != ',') /* advance to next segment of arg string */
+	;
+    } else {
+      /* reached end of parameter, set remaining factors to last value */
+      cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val);
+    }
+  }
+  jpeg_default_qtables(cinfo, force_baseline);
+  return TRUE;
+}
+
+
+GLOBAL(boolean)
+set_quant_slots (j_compress_ptr cinfo, char *arg)
+/* Process a quantization-table-selectors parameter string, of the form
+ *     N[,N,...]
+ * If there are more components than parameters, the last value is replicated.
+ */
+{
+  int val = 0;			/* default table # */
+  int ci;
+  char ch;
+
+  for (ci = 0; ci < MAX_COMPONENTS; ci++) {
+    if (*arg) {
+      ch = ',';			/* if not set by sscanf, will be ',' */
+      if (sscanf(arg, "%d%c", &val, &ch) < 1)
+	return FALSE;
+      if (ch != ',')		/* syntax check */
+	return FALSE;
+      if (val < 0 || val >= NUM_QUANT_TBLS) {
+	fprintf(stderr, "JPEG quantization tables are numbered 0..%d\n",
+		NUM_QUANT_TBLS-1);
+	return FALSE;
+      }
+      cinfo->comp_info[ci].quant_tbl_no = val;
+      while (*arg && *arg++ != ',') /* advance to next segment of arg string */
+	;
+    } else {
+      /* reached end of parameter, set remaining components to last table */
+      cinfo->comp_info[ci].quant_tbl_no = val;
+    }
+  }
+  return TRUE;
+}
+
+
+GLOBAL(boolean)
+set_sample_factors (j_compress_ptr cinfo, char *arg)
+/* Process a sample-factors parameter string, of the form
+ *     HxV[,HxV,...]
+ * If there are more components than parameters, "1x1" is assumed for the rest.
+ */
+{
+  int ci, val1, val2;
+  char ch1, ch2;
+
+  for (ci = 0; ci < MAX_COMPONENTS; ci++) {
+    if (*arg) {
+      ch2 = ',';		/* if not set by sscanf, will be ',' */
+      if (sscanf(arg, "%d%c%d%c", &val1, &ch1, &val2, &ch2) < 3)
+	return FALSE;
+      if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',') /* syntax check */
+	return FALSE;
+      if (val1 <= 0 || val1 > 4 || val2 <= 0 || val2 > 4) {
+	fprintf(stderr, "JPEG sampling factors must be 1..4\n");
+	return FALSE;
+      }
+      cinfo->comp_info[ci].h_samp_factor = val1;
+      cinfo->comp_info[ci].v_samp_factor = val2;
+      while (*arg && *arg++ != ',') /* advance to next segment of arg string */
+	;
+    } else {
+      /* reached end of parameter, set remaining components to 1x1 sampling */
+      cinfo->comp_info[ci].h_samp_factor = 1;
+      cinfo->comp_info[ci].v_samp_factor = 1;
+    }
+  }
+  return TRUE;
+}
diff --git a/jpeg-8d/rdtarga.c b/jpeg-8d/rdtarga.c
new file mode 100644
index 0000000..4c2cd26
--- /dev/null
+++ b/jpeg-8d/rdtarga.c
@@ -0,0 +1,500 @@
+/*
+ * rdtarga.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to read input images in Targa format.
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume input from
+ * an ordinary stdio stream.  They further assume that reading begins
+ * at the start of the file; start_input may need work if the
+ * user interface has already read some data (e.g., to determine that
+ * the file is indeed Targa format).
+ *
+ * Based on code contributed by Lee Daniel Crocker.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef TARGA_SUPPORTED
+
+
+/* Macros to deal with unsigned chars as efficiently as compiler allows */
+
+#ifdef HAVE_UNSIGNED_CHAR
+typedef unsigned char U_CHAR;
+#define UCH(x)	((int) (x))
+#else /* !HAVE_UNSIGNED_CHAR */
+#ifdef CHAR_IS_UNSIGNED
+typedef char U_CHAR;
+#define UCH(x)	((int) (x))
+#else
+typedef char U_CHAR;
+#define UCH(x)	((int) (x) & 0xFF)
+#endif
+#endif /* HAVE_UNSIGNED_CHAR */
+
+
+#define	ReadOK(file,buffer,len)	(JFREAD(file,buffer,len) == ((size_t) (len)))
+
+
+/* Private version of data source object */
+
+typedef struct _tga_source_struct * tga_source_ptr;
+
+typedef struct _tga_source_struct {
+  struct cjpeg_source_struct pub; /* public fields */
+
+  j_compress_ptr cinfo;		/* back link saves passing separate parm */
+
+  JSAMPARRAY colormap;		/* Targa colormap (converted to my format) */
+
+  jvirt_sarray_ptr whole_image;	/* Needed if funny input row order */
+  JDIMENSION current_row;	/* Current logical row number to read */
+
+  /* Pointer to routine to extract next Targa pixel from input file */
+  JMETHOD(void, read_pixel, (tga_source_ptr sinfo));
+
+  /* Result of read_pixel is delivered here: */
+  U_CHAR tga_pixel[4];
+
+  int pixel_size;		/* Bytes per Targa pixel (1 to 4) */
+
+  /* State info for reading RLE-coded pixels; both counts must be init to 0 */
+  int block_count;		/* # of pixels remaining in RLE block */
+  int dup_pixel_count;		/* # of times to duplicate previous pixel */
+
+  /* This saves the correct pixel-row-expansion method for preload_image */
+  JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo,
+				       cjpeg_source_ptr sinfo));
+} tga_source_struct;
+
+
+/* For expanding 5-bit pixel values to 8-bit with best rounding */
+
+static const UINT8 c5to8bits[32] = {
+    0,   8,  16,  25,  33,  41,  49,  58,
+   66,  74,  82,  90,  99, 107, 115, 123,
+  132, 140, 148, 156, 165, 173, 181, 189,
+  197, 206, 214, 222, 230, 239, 247, 255
+};
+
+
+
+LOCAL(int)
+read_byte (tga_source_ptr sinfo)
+/* Read next byte from Targa file */
+{
+  register FILE *infile = sinfo->pub.input_file;
+  register int c;
+
+  if ((c = getc(infile)) == EOF)
+    ERREXIT(sinfo->cinfo, JERR_INPUT_EOF);
+  return c;
+}
+
+
+LOCAL(void)
+read_colormap (tga_source_ptr sinfo, int cmaplen, int mapentrysize)
+/* Read the colormap from a Targa file */
+{
+  int i;
+
+  /* Presently only handles 24-bit BGR format */
+  if (mapentrysize != 24)
+    ERREXIT(sinfo->cinfo, JERR_TGA_BADCMAP);
+
+  for (i = 0; i < cmaplen; i++) {
+    sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo);
+    sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo);
+    sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo);
+  }
+}
+
+
+/*
+ * read_pixel methods: get a single pixel from Targa file into tga_pixel[]
+ */
+
+METHODDEF(void)
+read_non_rle_pixel (tga_source_ptr sinfo)
+/* Read one Targa pixel from the input file; no RLE expansion */
+{
+  register FILE *infile = sinfo->pub.input_file;
+  register int i;
+
+  for (i = 0; i < sinfo->pixel_size; i++) {
+    sinfo->tga_pixel[i] = (U_CHAR) getc(infile);
+  }
+}
+
+
+METHODDEF(void)
+read_rle_pixel (tga_source_ptr sinfo)
+/* Read one Targa pixel from the input file, expanding RLE data as needed */
+{
+  register FILE *infile = sinfo->pub.input_file;
+  register int i;
+
+  /* Duplicate previously read pixel? */
+  if (sinfo->dup_pixel_count > 0) {
+    sinfo->dup_pixel_count--;
+    return;
+  }
+
+  /* Time to read RLE block header? */
+  if (--sinfo->block_count < 0) { /* decrement pixels remaining in block */
+    i = read_byte(sinfo);
+    if (i & 0x80) {		/* Start of duplicate-pixel block? */
+      sinfo->dup_pixel_count = i & 0x7F; /* number of dups after this one */
+      sinfo->block_count = 0;	/* then read new block header */
+    } else {
+      sinfo->block_count = i & 0x7F; /* number of pixels after this one */
+    }
+  }
+
+  /* Read next pixel */
+  for (i = 0; i < sinfo->pixel_size; i++) {
+    sinfo->tga_pixel[i] = (U_CHAR) getc(infile);
+  }
+}
+
+
+/*
+ * Read one row of pixels.
+ *
+ * We provide several different versions depending on input file format.
+ */
+
+
+METHODDEF(JDIMENSION)
+get_8bit_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 8-bit grayscale pixels */
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  register JSAMPROW ptr;
+  register JDIMENSION col;
+  
+  ptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
+    *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]);
+  }
+  return 1;
+}
+
+METHODDEF(JDIMENSION)
+get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 8-bit colormap indexes */
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  register int t;
+  register JSAMPROW ptr;
+  register JDIMENSION col;
+  register JSAMPARRAY colormap = source->colormap;
+
+  ptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
+    t = UCH(source->tga_pixel[0]);
+    *ptr++ = colormap[0][t];
+    *ptr++ = colormap[1][t];
+    *ptr++ = colormap[2][t];
+  }
+  return 1;
+}
+
+METHODDEF(JDIMENSION)
+get_16bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 16-bit pixels */
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  register int t;
+  register JSAMPROW ptr;
+  register JDIMENSION col;
+  
+  ptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
+    t = UCH(source->tga_pixel[0]);
+    t += UCH(source->tga_pixel[1]) << 8;
+    /* We expand 5 bit data to 8 bit sample width.
+     * The format of the 16-bit (LSB first) input word is
+     *     xRRRRRGGGGGBBBBB
+     */
+    ptr[2] = (JSAMPLE) c5to8bits[t & 0x1F];
+    t >>= 5;
+    ptr[1] = (JSAMPLE) c5to8bits[t & 0x1F];
+    t >>= 5;
+    ptr[0] = (JSAMPLE) c5to8bits[t & 0x1F];
+    ptr += 3;
+  }
+  return 1;
+}
+
+METHODDEF(JDIMENSION)
+get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 24-bit pixels */
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  register JSAMPROW ptr;
+  register JDIMENSION col;
+  
+  ptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
+    *ptr++ = (JSAMPLE) UCH(source->tga_pixel[2]); /* change BGR to RGB order */
+    *ptr++ = (JSAMPLE) UCH(source->tga_pixel[1]);
+    *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]);
+  }
+  return 1;
+}
+
+/*
+ * Targa also defines a 32-bit pixel format with order B,G,R,A.
+ * We presently ignore the attribute byte, so the code for reading
+ * these pixels is identical to the 24-bit routine above.
+ * This works because the actual pixel length is only known to read_pixel.
+ */
+
+#define get_32bit_row  get_24bit_row
+
+
+/*
+ * This method is for re-reading the input data in standard top-down
+ * row order.  The entire image has already been read into whole_image
+ * with proper conversion of pixel format, but it's in a funny row order.
+ */
+
+METHODDEF(JDIMENSION)
+get_memory_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  JDIMENSION source_row;
+
+  /* Compute row of source that maps to current_row of normal order */
+  /* For now, assume image is bottom-up and not interlaced. */
+  /* NEEDS WORK to support interlaced images! */
+  source_row = cinfo->image_height - source->current_row - 1;
+
+  /* Fetch that row from virtual array */
+  source->pub.buffer = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, source->whole_image,
+     source_row, (JDIMENSION) 1, FALSE);
+
+  source->current_row++;
+  return 1;
+}
+
+
+/*
+ * This method loads the image into whole_image during the first call on
+ * get_pixel_rows.  The get_pixel_rows pointer is then adjusted to call
+ * get_memory_row on subsequent calls.
+ */
+
+METHODDEF(JDIMENSION)
+preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  JDIMENSION row;
+  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+
+  /* Read the data into a virtual array in input-file row order. */
+  for (row = 0; row < cinfo->image_height; row++) {
+    if (progress != NULL) {
+      progress->pub.pass_counter = (long) row;
+      progress->pub.pass_limit = (long) cinfo->image_height;
+      (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+    }
+    source->pub.buffer = (*cinfo->mem->access_virt_sarray)
+      ((j_common_ptr) cinfo, source->whole_image, row, (JDIMENSION) 1, TRUE);
+    (*source->get_pixel_rows) (cinfo, sinfo);
+  }
+  if (progress != NULL)
+    progress->completed_extra_passes++;
+
+  /* Set up to read from the virtual array in unscrambled order */
+  source->pub.get_pixel_rows = get_memory_row;
+  source->current_row = 0;
+  /* And read the first row */
+  return get_memory_row(cinfo, sinfo);
+}
+
+
+/*
+ * Read the file header; return image size and component count.
+ */
+
+METHODDEF(void)
+start_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  U_CHAR targaheader[18];
+  int idlen, cmaptype, subtype, flags, interlace_type, components;
+  unsigned int width, height, maplen;
+  boolean is_bottom_up;
+
+#define GET_2B(offset)	((unsigned int) UCH(targaheader[offset]) + \
+			 (((unsigned int) UCH(targaheader[offset+1])) << 8))
+
+  if (! ReadOK(source->pub.input_file, targaheader, 18))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+
+  /* Pretend "15-bit" pixels are 16-bit --- we ignore attribute bit anyway */
+  if (targaheader[16] == 15)
+    targaheader[16] = 16;
+
+  idlen = UCH(targaheader[0]);
+  cmaptype = UCH(targaheader[1]);
+  subtype = UCH(targaheader[2]);
+  maplen = GET_2B(5);
+  width = GET_2B(12);
+  height = GET_2B(14);
+  source->pixel_size = UCH(targaheader[16]) >> 3;
+  flags = UCH(targaheader[17]);	/* Image Descriptor byte */
+
+  is_bottom_up = ((flags & 0x20) == 0);	/* bit 5 set => top-down */
+  interlace_type = flags >> 6;	/* bits 6/7 are interlace code */
+
+  if (cmaptype > 1 ||		/* cmaptype must be 0 or 1 */
+      source->pixel_size < 1 || source->pixel_size > 4 ||
+      (UCH(targaheader[16]) & 7) != 0 || /* bits/pixel must be multiple of 8 */
+      interlace_type != 0)	/* currently don't allow interlaced image */
+    ERREXIT(cinfo, JERR_TGA_BADPARMS);
+  
+  if (subtype > 8) {
+    /* It's an RLE-coded file */
+    source->read_pixel = read_rle_pixel;
+    source->block_count = source->dup_pixel_count = 0;
+    subtype -= 8;
+  } else {
+    /* Non-RLE file */
+    source->read_pixel = read_non_rle_pixel;
+  }
+
+  /* Now should have subtype 1, 2, or 3 */
+  components = 3;		/* until proven different */
+  cinfo->in_color_space = JCS_RGB;
+
+  switch (subtype) {
+  case 1:			/* Colormapped image */
+    if (source->pixel_size == 1 && cmaptype == 1)
+      source->get_pixel_rows = get_8bit_row;
+    else
+      ERREXIT(cinfo, JERR_TGA_BADPARMS);
+    TRACEMS2(cinfo, 1, JTRC_TGA_MAPPED, width, height);
+    break;
+  case 2:			/* RGB image */
+    switch (source->pixel_size) {
+    case 2:
+      source->get_pixel_rows = get_16bit_row;
+      break;
+    case 3:
+      source->get_pixel_rows = get_24bit_row;
+      break;
+    case 4:
+      source->get_pixel_rows = get_32bit_row;
+      break;
+    default:
+      ERREXIT(cinfo, JERR_TGA_BADPARMS);
+      break;
+    }
+    TRACEMS2(cinfo, 1, JTRC_TGA, width, height);
+    break;
+  case 3:			/* Grayscale image */
+    components = 1;
+    cinfo->in_color_space = JCS_GRAYSCALE;
+    if (source->pixel_size == 1)
+      source->get_pixel_rows = get_8bit_gray_row;
+    else
+      ERREXIT(cinfo, JERR_TGA_BADPARMS);
+    TRACEMS2(cinfo, 1, JTRC_TGA_GRAY, width, height);
+    break;
+  default:
+    ERREXIT(cinfo, JERR_TGA_BADPARMS);
+    break;
+  }
+
+  if (is_bottom_up) {
+    /* Create a virtual array to buffer the upside-down image. */
+    source->whole_image = (*cinfo->mem->request_virt_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+       (JDIMENSION) width * components, (JDIMENSION) height, (JDIMENSION) 1);
+    if (cinfo->progress != NULL) {
+      cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+      progress->total_extra_passes++; /* count file input as separate pass */
+    }
+    /* source->pub.buffer will point to the virtual array. */
+    source->pub.buffer_height = 1; /* in case anyone looks at it */
+    source->pub.get_pixel_rows = preload_image;
+  } else {
+    /* Don't need a virtual array, but do need a one-row input buffer. */
+    source->whole_image = NULL;
+    source->pub.buffer = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (JDIMENSION) width * components, (JDIMENSION) 1);
+    source->pub.buffer_height = 1;
+    source->pub.get_pixel_rows = source->get_pixel_rows;
+  }
+  
+  while (idlen--)		/* Throw away ID field */
+    (void) read_byte(source);
+
+  if (maplen > 0) {
+    if (maplen > 256 || GET_2B(3) != 0)
+      ERREXIT(cinfo, JERR_TGA_BADCMAP);
+    /* Allocate space to store the colormap */
+    source->colormap = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE, (JDIMENSION) maplen, (JDIMENSION) 3);
+    /* and read it from the file */
+    read_colormap(source, (int) maplen, UCH(targaheader[7]));
+  } else {
+    if (cmaptype)		/* but you promised a cmap! */
+      ERREXIT(cinfo, JERR_TGA_BADPARMS);
+    source->colormap = NULL;
+  }
+
+  cinfo->input_components = components;
+  cinfo->data_precision = 8;
+  cinfo->image_width = width;
+  cinfo->image_height = height;
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  /* no work */
+}
+
+
+/*
+ * The module selection routine for Targa format input.
+ */
+
+GLOBAL(cjpeg_source_ptr)
+jinit_read_targa (j_compress_ptr cinfo)
+{
+  tga_source_ptr source;
+
+  /* Create module interface object */
+  source = (tga_source_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(tga_source_struct));
+  source->cinfo = cinfo;	/* make back link for subroutines */
+  /* Fill in method ptrs, except get_pixel_rows which start_input sets */
+  source->pub.start_input = start_input_tga;
+  source->pub.finish_input = finish_input_tga;
+
+  return (cjpeg_source_ptr) source;
+}
+
+#endif /* TARGA_SUPPORTED */
diff --git a/jpeg-8d/structure.txt b/jpeg-8d/structure.txt
new file mode 100644
index 0000000..44e48ca
--- /dev/null
+++ b/jpeg-8d/structure.txt
@@ -0,0 +1,941 @@
+IJG JPEG LIBRARY:  SYSTEM ARCHITECTURE
+
+Copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding.
+This file is part of the Independent JPEG Group's software.
+For conditions of distribution and use, see the accompanying README file.
+
+
+This file provides an overview of the architecture of the IJG JPEG software;
+that is, the functions of the various modules in the system and the interfaces
+between modules.  For more precise details about any data structure or calling
+convention, see the include files and comments in the source code.
+
+We assume that the reader is already somewhat familiar with the JPEG standard.
+The README file includes references for learning about JPEG.  The file
+libjpeg.txt describes the library from the viewpoint of an application
+programmer using the library; it's best to read that file before this one.
+Also, the file coderules.txt describes the coding style conventions we use.
+
+In this document, JPEG-specific terminology follows the JPEG standard:
+  A "component" means a color channel, e.g., Red or Luminance.
+  A "sample" is a single component value (i.e., one number in the image data).
+  A "coefficient" is a frequency coefficient (a DCT transform output number).
+  A "block" is an array of samples or coefficients.
+  An "MCU" (minimum coded unit) is an interleaved set of blocks of size
+	determined by the sampling factors, or a single block in a
+	noninterleaved scan.
+We do not use the terms "pixel" and "sample" interchangeably.  When we say
+pixel, we mean an element of the full-size image, while a sample is an element
+of the downsampled image.  Thus the number of samples may vary across
+components while the number of pixels does not.  (This terminology is not used
+rigorously throughout the code, but it is used in places where confusion would
+otherwise result.)
+
+
+*** System features ***
+
+The IJG distribution contains two parts:
+  * A subroutine library for JPEG compression and decompression.
+  * cjpeg/djpeg, two sample applications that use the library to transform
+    JFIF JPEG files to and from several other image formats.
+cjpeg/djpeg are of no great intellectual complexity: they merely add a simple
+command-line user interface and I/O routines for several uncompressed image
+formats.  This document concentrates on the library itself.
+
+We desire the library to be capable of supporting all JPEG baseline, extended
+sequential, and progressive DCT processes.  The library does not support the
+hierarchical or lossless processes defined in the standard.
+
+Within these limits, any set of compression parameters allowed by the JPEG
+spec should be readable for decompression.  (We can be more restrictive about
+what formats we can generate.)  Although the system design allows for all
+parameter values, some uncommon settings are not yet implemented and may
+never be; nonintegral sampling ratios are the prime example.  Furthermore,
+we treat 8-bit vs. 12-bit data precision as a compile-time switch, not a
+run-time option, because most machines can store 8-bit pixels much more
+compactly than 12-bit.
+
+By itself, the library handles only interchange JPEG datastreams --- in
+particular the widely used JFIF file format.  The library can be used by
+surrounding code to process interchange or abbreviated JPEG datastreams that
+are embedded in more complex file formats.  (For example, libtiff uses this
+library to implement JPEG compression within the TIFF file format.)
+
+The library includes a substantial amount of code that is not covered by the
+JPEG standard but is necessary for typical applications of JPEG.  These
+functions preprocess the image before JPEG compression or postprocess it after
+decompression.  They include colorspace conversion, downsampling/upsampling,
+and color quantization.  This code can be omitted if not needed.
+
+A wide range of quality vs. speed tradeoffs are possible in JPEG processing,
+and even more so in decompression postprocessing.  The decompression library
+provides multiple implementations that cover most of the useful tradeoffs,
+ranging from very-high-quality down to fast-preview operation.  On the
+compression side we have generally not provided low-quality choices, since
+compression is normally less time-critical.  It should be understood that the
+low-quality modes may not meet the JPEG standard's accuracy requirements;
+nonetheless, they are useful for viewers.
+
+
+*** Portability issues ***
+
+Portability is an essential requirement for the library.  The key portability
+issues that show up at the level of system architecture are:
+
+1.  Memory usage.  We want the code to be able to run on PC-class machines
+with limited memory.  Images should therefore be processed sequentially (in
+strips), to avoid holding the whole image in memory at once.  Where a
+full-image buffer is necessary, we should be able to use either virtual memory
+or temporary files.
+
+2.  Near/far pointer distinction.  To run efficiently on 80x86 machines, the
+code should distinguish "small" objects (kept in near data space) from
+"large" ones (kept in far data space).  This is an annoying restriction, but
+fortunately it does not impact code quality for less brain-damaged machines,
+and the source code clutter turns out to be minimal with sufficient use of
+pointer typedefs.
+
+3. Data precision.  We assume that "char" is at least 8 bits, "short" and
+"int" at least 16, "long" at least 32.  The code will work fine with larger
+data sizes, although memory may be used inefficiently in some cases.  However,
+the JPEG compressed datastream must ultimately appear on external storage as a
+sequence of 8-bit bytes if it is to conform to the standard.  This may pose a
+problem on machines where char is wider than 8 bits.  The library represents
+compressed data as an array of values of typedef JOCTET.  If no data type
+exactly 8 bits wide is available, custom data source and data destination
+modules must be written to unpack and pack the chosen JOCTET datatype into
+8-bit external representation.
+
+
+*** System overview ***
+
+The compressor and decompressor are each divided into two main sections:
+the JPEG compressor or decompressor proper, and the preprocessing or
+postprocessing functions.  The interface between these two sections is the
+image data that the official JPEG spec regards as its input or output: this
+data is in the colorspace to be used for compression, and it is downsampled
+to the sampling factors to be used.  The preprocessing and postprocessing
+steps are responsible for converting a normal image representation to or from
+this form.  (Those few applications that want to deal with YCbCr downsampled
+data can skip the preprocessing or postprocessing step.)
+
+Looking more closely, the compressor library contains the following main
+elements:
+
+  Preprocessing:
+    * Color space conversion (e.g., RGB to YCbCr).
+    * Edge expansion and downsampling.  Optionally, this step can do simple
+      smoothing --- this is often helpful for low-quality source data.
+  JPEG proper:
+    * MCU assembly, DCT, quantization.
+    * Entropy coding (sequential or progressive, Huffman or arithmetic).
+
+In addition to these modules we need overall control, marker generation,
+and support code (memory management & error handling).  There is also a
+module responsible for physically writing the output data --- typically
+this is just an interface to fwrite(), but some applications may need to
+do something else with the data.
+
+The decompressor library contains the following main elements:
+
+  JPEG proper:
+    * Entropy decoding (sequential or progressive, Huffman or arithmetic).
+    * Dequantization, inverse DCT, MCU disassembly.
+  Postprocessing:
+    * Upsampling.  Optionally, this step may be able to do more general
+      rescaling of the image.
+    * Color space conversion (e.g., YCbCr to RGB).  This step may also
+      provide gamma adjustment [ currently it does not ].
+    * Optional color quantization (e.g., reduction to 256 colors).
+    * Optional color precision reduction (e.g., 24-bit to 15-bit color).
+      [This feature is not currently implemented.]
+
+We also need overall control, marker parsing, and a data source module.
+The support code (memory management & error handling) can be shared with
+the compression half of the library.
+
+There may be several implementations of each of these elements, particularly
+in the decompressor, where a wide range of speed/quality tradeoffs is very
+useful.  It must be understood that some of the best speedups involve
+merging adjacent steps in the pipeline.  For example, upsampling, color space
+conversion, and color quantization might all be done at once when using a
+low-quality ordered-dither technique.  The system architecture is designed to
+allow such merging where appropriate.
+
+
+Note: it is convenient to regard edge expansion (padding to block boundaries)
+as a preprocessing/postprocessing function, even though the JPEG spec includes
+it in compression/decompression.  We do this because downsampling/upsampling
+can be simplified a little if they work on padded data: it's not necessary to
+have special cases at the right and bottom edges.  Therefore the interface
+buffer is always an integral number of blocks wide and high, and we expect
+compression preprocessing to pad the source data properly.  Padding will occur
+only to the next block (N-sample) boundary.  In an interleaved-scan situation,
+additional dummy blocks may be used to fill out MCUs, but the MCU assembly and
+disassembly logic will create or discard these blocks internally.  (This is
+advantageous for speed reasons, since we avoid DCTing the dummy blocks.
+It also permits a small reduction in file size, because the compressor can
+choose dummy block contents so as to minimize their size in compressed form.
+Finally, it makes the interface buffer specification independent of whether
+the file is actually interleaved or not.)  Applications that wish to deal
+directly with the downsampled data must provide similar buffering and padding
+for odd-sized images.
+
+
+*** Poor man's object-oriented programming ***
+
+It should be clear by now that we have a lot of quasi-independent processing
+steps, many of which have several possible behaviors.  To avoid cluttering the
+code with lots of switch statements, we use a simple form of object-style
+programming to separate out the different possibilities.
+
+For example, two different color quantization algorithms could be implemented
+as two separate modules that present the same external interface; at runtime,
+the calling code will access the proper module indirectly through an "object".
+
+We can get the limited features we need while staying within portable C.
+The basic tool is a function pointer.  An "object" is just a struct
+containing one or more function pointer fields, each of which corresponds to
+a method name in real object-oriented languages.  During initialization we
+fill in the function pointers with references to whichever module we have
+determined we need to use in this run.  Then invocation of the module is done
+by indirecting through a function pointer; on most machines this is no more
+expensive than a switch statement, which would be the only other way of
+making the required run-time choice.  The really significant benefit, of
+course, is keeping the source code clean and well structured.
+
+We can also arrange to have private storage that varies between different
+implementations of the same kind of object.  We do this by making all the
+module-specific object structs be separately allocated entities, which will
+be accessed via pointers in the master compression or decompression struct.
+The "public" fields or methods for a given kind of object are specified by
+a commonly known struct.  But a module's initialization code can allocate
+a larger struct that contains the common struct as its first member, plus
+additional private fields.  With appropriate pointer casting, the module's
+internal functions can access these private fields.  (For a simple example,
+see jdatadst.c, which implements the external interface specified by struct
+jpeg_destination_mgr, but adds extra fields.)
+
+(Of course this would all be a lot easier if we were using C++, but we are
+not yet prepared to assume that everyone has a C++ compiler.)
+
+An important benefit of this scheme is that it is easy to provide multiple
+versions of any method, each tuned to a particular case.  While a lot of
+precalculation might be done to select an optimal implementation of a method,
+the cost per invocation is constant.  For example, the upsampling step might
+have a "generic" method, plus one or more "hardwired" methods for the most
+popular sampling factors; the hardwired methods would be faster because they'd
+use straight-line code instead of for-loops.  The cost to determine which
+method to use is paid only once, at startup, and the selection criteria are
+hidden from the callers of the method.
+
+This plan differs a little bit from usual object-oriented structures, in that
+only one instance of each object class will exist during execution.  The
+reason for having the class structure is that on different runs we may create
+different instances (choose to execute different modules).  You can think of
+the term "method" as denoting the common interface presented by a particular
+set of interchangeable functions, and "object" as denoting a group of related
+methods, or the total shared interface behavior of a group of modules.
+
+
+*** Overall control structure ***
+
+We previously mentioned the need for overall control logic in the compression
+and decompression libraries.  In IJG implementations prior to v5, overall
+control was mostly provided by "pipeline control" modules, which proved to be
+large, unwieldy, and hard to understand.  To improve the situation, the
+control logic has been subdivided into multiple modules.  The control modules
+consist of:
+
+1. Master control for module selection and initialization.  This has two
+responsibilities:
+
+   1A.  Startup initialization at the beginning of image processing.
+        The individual processing modules to be used in this run are selected
+        and given initialization calls.
+
+   1B.  Per-pass control.  This determines how many passes will be performed
+        and calls each active processing module to configure itself
+        appropriately at the beginning of each pass.  End-of-pass processing,
+	where necessary, is also invoked from the master control module.
+
+   Method selection is partially distributed, in that a particular processing
+   module may contain several possible implementations of a particular method,
+   which it will select among when given its initialization call.  The master
+   control code need only be concerned with decisions that affect more than
+   one module.
+ 
+2. Data buffering control.  A separate control module exists for each
+   inter-processing-step data buffer.  This module is responsible for
+   invoking the processing steps that write or read that data buffer.
+
+Each buffer controller sees the world as follows:
+
+input data => processing step A => buffer => processing step B => output data
+                      |              |               |
+              ------------------ controller ------------------
+
+The controller knows the dataflow requirements of steps A and B: how much data
+they want to accept in one chunk and how much they output in one chunk.  Its
+function is to manage its buffer and call A and B at the proper times.
+
+A data buffer control module may itself be viewed as a processing step by a
+higher-level control module; thus the control modules form a binary tree with
+elementary processing steps at the leaves of the tree.
+
+The control modules are objects.  A considerable amount of flexibility can
+be had by replacing implementations of a control module.  For example:
+* Merging of adjacent steps in the pipeline is done by replacing a control
+  module and its pair of processing-step modules with a single processing-
+  step module.  (Hence the possible merges are determined by the tree of
+  control modules.)
+* In some processing modes, a given interstep buffer need only be a "strip"
+  buffer large enough to accommodate the desired data chunk sizes.  In other
+  modes, a full-image buffer is needed and several passes are required.
+  The control module determines which kind of buffer is used and manipulates
+  virtual array buffers as needed.  One or both processing steps may be
+  unaware of the multi-pass behavior.
+
+In theory, we might be able to make all of the data buffer controllers
+interchangeable and provide just one set of implementations for all.  In
+practice, each one contains considerable special-case processing for its
+particular job.  The buffer controller concept should be regarded as an
+overall system structuring principle, not as a complete description of the
+task performed by any one controller.
+
+
+*** Compression object structure ***
+
+Here is a sketch of the logical structure of the JPEG compression library:
+
+                                                 |-- Colorspace conversion
+                  |-- Preprocessing controller --|
+                  |                              |-- Downsampling
+Main controller --|
+                  |                            |-- Forward DCT, quantize
+                  |-- Coefficient controller --|
+                                               |-- Entropy encoding
+
+This sketch also describes the flow of control (subroutine calls) during
+typical image data processing.  Each of the components shown in the diagram is
+an "object" which may have several different implementations available.  One
+or more source code files contain the actual implementation(s) of each object.
+
+The objects shown above are:
+
+* Main controller: buffer controller for the subsampled-data buffer, which
+  holds the preprocessed input data.  This controller invokes preprocessing to
+  fill the subsampled-data buffer, and JPEG compression to empty it.  There is
+  usually no need for a full-image buffer here; a strip buffer is adequate.
+
+* Preprocessing controller: buffer controller for the downsampling input data
+  buffer, which lies between colorspace conversion and downsampling.  Note
+  that a unified conversion/downsampling module would probably replace this
+  controller entirely.
+
+* Colorspace conversion: converts application image data into the desired
+  JPEG color space; also changes the data from pixel-interleaved layout to
+  separate component planes.  Processes one pixel row at a time.
+
+* Downsampling: performs reduction of chroma components as required.
+  Optionally may perform pixel-level smoothing as well.  Processes a "row
+  group" at a time, where a row group is defined as Vmax pixel rows of each
+  component before downsampling, and Vk sample rows afterwards (remember Vk
+  differs across components).  Some downsampling or smoothing algorithms may
+  require context rows above and below the current row group; the
+  preprocessing controller is responsible for supplying these rows via proper
+  buffering.  The downsampler is responsible for edge expansion at the right
+  edge (i.e., extending each sample row to a multiple of N samples); but the
+  preprocessing controller is responsible for vertical edge expansion (i.e.,
+  duplicating the bottom sample row as needed to make a multiple of N rows).
+
+* Coefficient controller: buffer controller for the DCT-coefficient data.
+  This controller handles MCU assembly, including insertion of dummy DCT
+  blocks when needed at the right or bottom edge.  When performing
+  Huffman-code optimization or emitting a multiscan JPEG file, this
+  controller is responsible for buffering the full image.  The equivalent of
+  one fully interleaved MCU row of subsampled data is processed per call,
+  even when the JPEG file is noninterleaved.
+
+* Forward DCT and quantization: Perform DCT, quantize, and emit coefficients.
+  Works on one or more DCT blocks at a time.  (Note: the coefficients are now
+  emitted in normal array order, which the entropy encoder is expected to
+  convert to zigzag order as necessary.  Prior versions of the IJG code did
+  the conversion to zigzag order within the quantization step.)
+
+* Entropy encoding: Perform Huffman or arithmetic entropy coding and emit the
+  coded data to the data destination module.  Works on one MCU per call.
+  For progressive JPEG, the same DCT blocks are fed to the entropy coder
+  during each pass, and the coder must emit the appropriate subset of
+  coefficients.
+
+In addition to the above objects, the compression library includes these
+objects:
+
+* Master control: determines the number of passes required, controls overall
+  and per-pass initialization of the other modules.
+
+* Marker writing: generates JPEG markers (except for RSTn, which is emitted
+  by the entropy encoder when needed).
+
+* Data destination manager: writes the output JPEG datastream to its final
+  destination (e.g., a file).  The destination manager supplied with the
+  library knows how to write to a stdio stream or to a memory buffer;
+  for other behaviors, the surrounding application may provide its own
+  destination manager.
+
+* Memory manager: allocates and releases memory, controls virtual arrays
+  (with backing store management, where required).
+
+* Error handler: performs formatting and output of error and trace messages;
+  determines handling of nonfatal errors.  The surrounding application may
+  override some or all of this object's methods to change error handling.
+
+* Progress monitor: supports output of "percent-done" progress reports.
+  This object represents an optional callback to the surrounding application:
+  if wanted, it must be supplied by the application.
+
+The error handler, destination manager, and progress monitor objects are
+defined as separate objects in order to simplify application-specific
+customization of the JPEG library.  A surrounding application may override
+individual methods or supply its own all-new implementation of one of these
+objects.  The object interfaces for these objects are therefore treated as
+part of the application interface of the library, whereas the other objects
+are internal to the library.
+
+The error handler and memory manager are shared by JPEG compression and
+decompression; the progress monitor, if used, may be shared as well.
+
+
+*** Decompression object structure ***
+
+Here is a sketch of the logical structure of the JPEG decompression library:
+
+                                               |-- Entropy decoding
+                  |-- Coefficient controller --|
+                  |                            |-- Dequantize, Inverse DCT
+Main controller --|
+                  |                               |-- Upsampling
+                  |-- Postprocessing controller --|   |-- Colorspace conversion
+                                                  |-- Color quantization
+                                                  |-- Color precision reduction
+
+As before, this diagram also represents typical control flow.  The objects
+shown are:
+
+* Main controller: buffer controller for the subsampled-data buffer, which
+  holds the output of JPEG decompression proper.  This controller's primary
+  task is to feed the postprocessing procedure.  Some upsampling algorithms
+  may require context rows above and below the current row group; when this
+  is true, the main controller is responsible for managing its buffer so as
+  to make context rows available.  In the current design, the main buffer is
+  always a strip buffer; a full-image buffer is never required.
+
+* Coefficient controller: buffer controller for the DCT-coefficient data.
+  This controller handles MCU disassembly, including deletion of any dummy
+  DCT blocks at the right or bottom edge.  When reading a multiscan JPEG
+  file, this controller is responsible for buffering the full image.
+  (Buffering DCT coefficients, rather than samples, is necessary to support
+  progressive JPEG.)  The equivalent of one fully interleaved MCU row of
+  subsampled data is processed per call, even when the source JPEG file is
+  noninterleaved.
+
+* Entropy decoding: Read coded data from the data source module and perform
+  Huffman or arithmetic entropy decoding.  Works on one MCU per call.
+  For progressive JPEG decoding, the coefficient controller supplies the prior
+  coefficients of each MCU (initially all zeroes), which the entropy decoder
+  modifies in each scan.
+
+* Dequantization and inverse DCT: like it says.  Note that the coefficients
+  buffered by the coefficient controller have NOT been dequantized; we
+  merge dequantization and inverse DCT into a single step for speed reasons.
+  When scaled-down output is asked for, simplified DCT algorithms may be used
+  that need fewer coefficients and emit fewer samples per DCT block, not the
+  full 8x8.  Works on one DCT block at a time.
+
+* Postprocessing controller: buffer controller for the color quantization
+  input buffer, when quantization is in use.  (Without quantization, this
+  controller just calls the upsampler.)  For two-pass quantization, this
+  controller is responsible for buffering the full-image data.
+
+* Upsampling: restores chroma components to full size.  (May support more
+  general output rescaling, too.  Note that if undersized DCT outputs have
+  been emitted by the DCT module, this module must adjust so that properly
+  sized outputs are created.)  Works on one row group at a time.  This module
+  also calls the color conversion module, so its top level is effectively a
+  buffer controller for the upsampling->color conversion buffer.  However, in
+  all but the highest-quality operating modes, upsampling and color
+  conversion are likely to be merged into a single step.
+
+* Colorspace conversion: convert from JPEG color space to output color space,
+  and change data layout from separate component planes to pixel-interleaved.
+  Works on one pixel row at a time.
+
+* Color quantization: reduce the data to colormapped form, using either an
+  externally specified colormap or an internally generated one.  This module
+  is not used for full-color output.  Works on one pixel row at a time; may
+  require two passes to generate a color map.  Note that the output will
+  always be a single component representing colormap indexes.  In the current
+  design, the output values are JSAMPLEs, so an 8-bit compilation cannot
+  quantize to more than 256 colors.  This is unlikely to be a problem in
+  practice.
+
+* Color reduction: this module handles color precision reduction, e.g.,
+  generating 15-bit color (5 bits/primary) from JPEG's 24-bit output.
+  Not quite clear yet how this should be handled... should we merge it with
+  colorspace conversion???
+
+Note that some high-speed operating modes might condense the entire
+postprocessing sequence to a single module (upsample, color convert, and
+quantize in one step).
+
+In addition to the above objects, the decompression library includes these
+objects:
+
+* Master control: determines the number of passes required, controls overall
+  and per-pass initialization of the other modules.  This is subdivided into
+  input and output control: jdinput.c controls only input-side processing,
+  while jdmaster.c handles overall initialization and output-side control.
+
+* Marker reading: decodes JPEG markers (except for RSTn).
+
+* Data source manager: supplies the input JPEG datastream.  The source
+  manager supplied with the library knows how to read from a stdio stream
+  or from a memory buffer;  for other behaviors, the surrounding application
+  may provide its own source manager.
+
+* Memory manager: same as for compression library.
+
+* Error handler: same as for compression library.
+
+* Progress monitor: same as for compression library.
+
+As with compression, the data source manager, error handler, and progress
+monitor are candidates for replacement by a surrounding application.
+
+
+*** Decompression input and output separation ***
+
+To support efficient incremental display of progressive JPEG files, the
+decompressor is divided into two sections that can run independently:
+
+1. Data input includes marker parsing, entropy decoding, and input into the
+   coefficient controller's DCT coefficient buffer.  Note that this
+   processing is relatively cheap and fast.
+
+2. Data output reads from the DCT coefficient buffer and performs the IDCT
+   and all postprocessing steps.
+
+For a progressive JPEG file, the data input processing is allowed to get
+arbitrarily far ahead of the data output processing.  (This occurs only
+if the application calls jpeg_consume_input(); otherwise input and output
+run in lockstep, since the input section is called only when the output
+section needs more data.)  In this way the application can avoid making
+extra display passes when data is arriving faster than the display pass
+can run.  Furthermore, it is possible to abort an output pass without
+losing anything, since the coefficient buffer is read-only as far as the
+output section is concerned.  See libjpeg.txt for more detail.
+
+A full-image coefficient array is only created if the JPEG file has multiple
+scans (or if the application specifies buffered-image mode anyway).  When
+reading a single-scan file, the coefficient controller normally creates only
+a one-MCU buffer, so input and output processing must run in lockstep in this
+case.  jpeg_consume_input() is effectively a no-op in this situation.
+
+The main impact of dividing the decompressor in this fashion is that we must
+be very careful with shared variables in the cinfo data structure.  Each
+variable that can change during the course of decompression must be
+classified as belonging to data input or data output, and each section must
+look only at its own variables.  For example, the data output section may not
+depend on any of the variables that describe the current scan in the JPEG
+file, because these may change as the data input section advances into a new
+scan.
+
+The progress monitor is (somewhat arbitrarily) defined to treat input of the
+file as one pass when buffered-image mode is not used, and to ignore data
+input work completely when buffered-image mode is used.  Note that the
+library has no reliable way to predict the number of passes when dealing
+with a progressive JPEG file, nor can it predict the number of output passes
+in buffered-image mode.  So the work estimate is inherently bogus anyway.
+
+No comparable division is currently made in the compression library, because
+there isn't any real need for it.
+
+
+*** Data formats ***
+
+Arrays of pixel sample values use the following data structure:
+
+    typedef something JSAMPLE;		a pixel component value, 0..MAXJSAMPLE
+    typedef JSAMPLE *JSAMPROW;		ptr to a row of samples
+    typedef JSAMPROW *JSAMPARRAY;	ptr to a list of rows
+    typedef JSAMPARRAY *JSAMPIMAGE;	ptr to a list of color-component arrays
+
+The basic element type JSAMPLE will typically be one of unsigned char,
+(signed) char, or short.  Short will be used if samples wider than 8 bits are
+to be supported (this is a compile-time option).  Otherwise, unsigned char is
+used if possible.  If the compiler only supports signed chars, then it is
+necessary to mask off the value when reading.  Thus, all reads of JSAMPLE
+values must be coded as "GETJSAMPLE(value)", where the macro will be defined
+as "((value) & 0xFF)" on signed-char machines and "((int) (value))" elsewhere.
+
+With these conventions, JSAMPLE values can be assumed to be >= 0.  This helps
+simplify correct rounding during downsampling, etc.  The JPEG standard's
+specification that sample values run from -128..127 is accommodated by
+subtracting 128 from the sample value in the DCT step.  Similarly, during
+decompression the output of the IDCT step will be immediately shifted back to
+0..255.  (NB: different values are required when 12-bit samples are in use.
+The code is written in terms of MAXJSAMPLE and CENTERJSAMPLE, which will be
+defined as 255 and 128 respectively in an 8-bit implementation, and as 4095
+and 2048 in a 12-bit implementation.)
+
+We use a pointer per row, rather than a two-dimensional JSAMPLE array.  This
+choice costs only a small amount of memory and has several benefits:
+* Code using the data structure doesn't need to know the allocated width of
+  the rows.  This simplifies edge expansion/compression, since we can work
+  in an array that's wider than the logical picture width.
+* Indexing doesn't require multiplication; this is a performance win on many
+  machines.
+* Arrays with more than 64K total elements can be supported even on machines
+  where malloc() cannot allocate chunks larger than 64K.
+* The rows forming a component array may be allocated at different times
+  without extra copying.  This trick allows some speedups in smoothing steps
+  that need access to the previous and next rows.
+
+Note that each color component is stored in a separate array; we don't use the
+traditional layout in which the components of a pixel are stored together.
+This simplifies coding of modules that work on each component independently,
+because they don't need to know how many components there are.  Furthermore,
+we can read or write each component to a temporary file independently, which
+is helpful when dealing with noninterleaved JPEG files.
+
+In general, a specific sample value is accessed by code such as
+	GETJSAMPLE(image[colorcomponent][row][col])
+where col is measured from the image left edge, but row is measured from the
+first sample row currently in memory.  Either of the first two indexings can
+be precomputed by copying the relevant pointer.
+
+
+Since most image-processing applications prefer to work on images in which
+the components of a pixel are stored together, the data passed to or from the
+surrounding application uses the traditional convention: a single pixel is
+represented by N consecutive JSAMPLE values, and an image row is an array of
+(# of color components)*(image width) JSAMPLEs.  One or more rows of data can
+be represented by a pointer of type JSAMPARRAY in this scheme.  This scheme is
+converted to component-wise storage inside the JPEG library.  (Applications
+that want to skip JPEG preprocessing or postprocessing will have to contend
+with component-wise storage.)
+
+
+Arrays of DCT-coefficient values use the following data structure:
+
+    typedef short JCOEF;		a 16-bit signed integer
+    typedef JCOEF JBLOCK[DCTSIZE2];	an 8x8 block of coefficients
+    typedef JBLOCK *JBLOCKROW;		ptr to one horizontal row of 8x8 blocks
+    typedef JBLOCKROW *JBLOCKARRAY;	ptr to a list of such rows
+    typedef JBLOCKARRAY *JBLOCKIMAGE;	ptr to a list of color component arrays
+
+The underlying type is at least a 16-bit signed integer; while "short" is big
+enough on all machines of interest, on some machines it is preferable to use
+"int" for speed reasons, despite the storage cost.  Coefficients are grouped
+into 8x8 blocks (but we always use #defines DCTSIZE and DCTSIZE2 rather than
+"8" and "64").
+
+The contents of a coefficient block may be in either "natural" or zigzagged
+order, and may be true values or divided by the quantization coefficients,
+depending on where the block is in the processing pipeline.  In the current
+library, coefficient blocks are kept in natural order everywhere; the entropy
+codecs zigzag or dezigzag the data as it is written or read.  The blocks
+contain quantized coefficients everywhere outside the DCT/IDCT subsystems.
+(This latter decision may need to be revisited to support variable
+quantization a la JPEG Part 3.)
+
+Notice that the allocation unit is now a row of 8x8 coefficient blocks,
+corresponding to N rows of samples.  Otherwise the structure is much the same
+as for samples, and for the same reasons.
+
+On machines where malloc() can't handle a request bigger than 64Kb, this data
+structure limits us to rows of less than 512 JBLOCKs, or a picture width of
+4000+ pixels.  This seems an acceptable restriction.
+
+
+On 80x86 machines, the bottom-level pointer types (JSAMPROW and JBLOCKROW)
+must be declared as "far" pointers, but the upper levels can be "near"
+(implying that the pointer lists are allocated in the DS segment).
+We use a #define symbol FAR, which expands to the "far" keyword when
+compiling on 80x86 machines and to nothing elsewhere.
+
+
+*** Suspendable processing ***
+
+In some applications it is desirable to use the JPEG library as an
+incremental, memory-to-memory filter.  In this situation the data source or
+destination may be a limited-size buffer, and we can't rely on being able to
+empty or refill the buffer at arbitrary times.  Instead the application would
+like to have control return from the library at buffer overflow/underrun, and
+then resume compression or decompression at a later time.
+
+This scenario is supported for simple cases.  (For anything more complex, we
+recommend that the application "bite the bullet" and develop real multitasking
+capability.)  The libjpeg.txt file goes into more detail about the usage and
+limitations of this capability; here we address the implications for library
+structure.
+
+The essence of the problem is that the entropy codec (coder or decoder) must
+be prepared to stop at arbitrary times.  In turn, the controllers that call
+the entropy codec must be able to stop before having produced or consumed all
+the data that they normally would handle in one call.  That part is reasonably
+straightforward: we make the controller call interfaces include "progress
+counters" which indicate the number of data chunks successfully processed, and
+we require callers to test the counter rather than just assume all of the data
+was processed.
+
+Rather than trying to restart at an arbitrary point, the current Huffman
+codecs are designed to restart at the beginning of the current MCU after a
+suspension due to buffer overflow/underrun.  At the start of each call, the
+codec's internal state is loaded from permanent storage (in the JPEG object
+structures) into local variables.  On successful completion of the MCU, the
+permanent state is updated.  (This copying is not very expensive, and may even
+lead to *improved* performance if the local variables can be registerized.)
+If a suspension occurs, the codec simply returns without updating the state,
+thus effectively reverting to the start of the MCU.  Note that this implies
+leaving some data unprocessed in the source/destination buffer (ie, the
+compressed partial MCU).  The data source/destination module interfaces are
+specified so as to make this possible.  This also implies that the data buffer
+must be large enough to hold a worst-case compressed MCU; a couple thousand
+bytes should be enough.
+
+In a successive-approximation AC refinement scan, the progressive Huffman
+decoder has to be able to undo assignments of newly nonzero coefficients if it
+suspends before the MCU is complete, since decoding requires distinguishing
+previously-zero and previously-nonzero coefficients.  This is a bit tedious
+but probably won't have much effect on performance.  Other variants of Huffman
+decoding need not worry about this, since they will just store the same values
+again if forced to repeat the MCU.
+
+This approach would probably not work for an arithmetic codec, since its
+modifiable state is quite large and couldn't be copied cheaply.  Instead it
+would have to suspend and resume exactly at the point of the buffer end.
+
+The JPEG marker reader is designed to cope with suspension at an arbitrary
+point.  It does so by backing up to the start of the marker parameter segment,
+so the data buffer must be big enough to hold the largest marker of interest.
+Again, a couple KB should be adequate.  (A special "skip" convention is used
+to bypass COM and APPn markers, so these can be larger than the buffer size
+without causing problems; otherwise a 64K buffer would be needed in the worst
+case.)
+
+The JPEG marker writer currently does *not* cope with suspension.
+We feel that this is not necessary; it is much easier simply to require
+the application to ensure there is enough buffer space before starting.  (An
+empty 2K buffer is more than sufficient for the header markers; and ensuring
+there are a dozen or two bytes available before calling jpeg_finish_compress()
+will suffice for the trailer.)  This would not work for writing multi-scan
+JPEG files, but we simply do not intend to support that capability with
+suspension.
+
+
+*** Memory manager services ***
+
+The JPEG library's memory manager controls allocation and deallocation of
+memory, and it manages large "virtual" data arrays on machines where the
+operating system does not provide virtual memory.  Note that the same
+memory manager serves both compression and decompression operations.
+
+In all cases, allocated objects are tied to a particular compression or
+decompression master record, and they will be released when that master
+record is destroyed.
+
+The memory manager does not provide explicit deallocation of objects.
+Instead, objects are created in "pools" of free storage, and a whole pool
+can be freed at once.  This approach helps prevent storage-leak bugs, and
+it speeds up operations whenever malloc/free are slow (as they often are).
+The pools can be regarded as lifetime identifiers for objects.  Two
+pools/lifetimes are defined:
+  * JPOOL_PERMANENT	lasts until master record is destroyed
+  * JPOOL_IMAGE		lasts until done with image (JPEG datastream)
+Permanent lifetime is used for parameters and tables that should be carried
+across from one datastream to another; this includes all application-visible
+parameters.  Image lifetime is used for everything else.  (A third lifetime,
+JPOOL_PASS = one processing pass, was originally planned.  However it was
+dropped as not being worthwhile.  The actual usage patterns are such that the
+peak memory usage would be about the same anyway; and having per-pass storage
+substantially complicates the virtual memory allocation rules --- see below.)
+
+The memory manager deals with three kinds of object:
+1. "Small" objects.  Typically these require no more than 10K-20K total.
+2. "Large" objects.  These may require tens to hundreds of K depending on
+   image size.  Semantically they behave the same as small objects, but we
+   distinguish them for two reasons:
+     * On MS-DOS machines, large objects are referenced by FAR pointers,
+       small objects by NEAR pointers.
+     * Pool allocation heuristics may differ for large and small objects.
+   Note that individual "large" objects cannot exceed the size allowed by
+   type size_t, which may be 64K or less on some machines.
+3. "Virtual" objects.  These are large 2-D arrays of JSAMPLEs or JBLOCKs
+   (typically large enough for the entire image being processed).  The
+   memory manager provides stripwise access to these arrays.  On machines
+   without virtual memory, the rest of the array may be swapped out to a
+   temporary file.
+
+(Note: JSAMPARRAY and JBLOCKARRAY data structures are a combination of large
+objects for the data proper and small objects for the row pointers.  For
+convenience and speed, the memory manager provides single routines to create
+these structures.  Similarly, virtual arrays include a small control block
+and a JSAMPARRAY or JBLOCKARRAY working buffer, all created with one call.)
+
+In the present implementation, virtual arrays are only permitted to have image
+lifespan.  (Permanent lifespan would not be reasonable, and pass lifespan is
+not very useful since a virtual array's raison d'etre is to store data for
+multiple passes through the image.)  We also expect that only "small" objects
+will be given permanent lifespan, though this restriction is not required by
+the memory manager.
+
+In a non-virtual-memory machine, some performance benefit can be gained by
+making the in-memory buffers for virtual arrays be as large as possible.
+(For small images, the buffers might fit entirely in memory, so blind
+swapping would be very wasteful.)  The memory manager will adjust the height
+of the buffers to fit within a prespecified maximum memory usage.  In order
+to do this in a reasonably optimal fashion, the manager needs to allocate all
+of the virtual arrays at once.  Therefore, there isn't a one-step allocation
+routine for virtual arrays; instead, there is a "request" routine that simply
+allocates the control block, and a "realize" routine (called just once) that
+determines space allocation and creates all of the actual buffers.  The
+realize routine must allow for space occupied by non-virtual large objects.
+(We don't bother to factor in the space needed for small objects, on the
+grounds that it isn't worth the trouble.)
+
+To support all this, we establish the following protocol for doing business
+with the memory manager:
+  1. Modules must request virtual arrays (which may have only image lifespan)
+     during the initial setup phase, i.e., in their jinit_xxx routines.
+  2. All "large" objects (including JSAMPARRAYs and JBLOCKARRAYs) must also be
+     allocated during initial setup.
+  3. realize_virt_arrays will be called at the completion of initial setup.
+     The above conventions ensure that sufficient information is available
+     for it to choose a good size for virtual array buffers.
+Small objects of any lifespan may be allocated at any time.  We expect that
+the total space used for small objects will be small enough to be negligible
+in the realize_virt_arrays computation.
+
+In a virtual-memory machine, we simply pretend that the available space is
+infinite, thus causing realize_virt_arrays to decide that it can allocate all
+the virtual arrays as full-size in-memory buffers.  The overhead of the
+virtual-array access protocol is very small when no swapping occurs.
+
+A virtual array can be specified to be "pre-zeroed"; when this flag is set,
+never-yet-written sections of the array are set to zero before being made
+available to the caller.  If this flag is not set, never-written sections
+of the array contain garbage.  (This feature exists primarily because the
+equivalent logic would otherwise be needed in jdcoefct.c for progressive
+JPEG mode; we may as well make it available for possible other uses.)
+
+The first write pass on a virtual array is required to occur in top-to-bottom
+order; read passes, as well as any write passes after the first one, may
+access the array in any order.  This restriction exists partly to simplify
+the virtual array control logic, and partly because some file systems may not
+support seeking beyond the current end-of-file in a temporary file.  The main
+implication of this restriction is that rearrangement of rows (such as
+converting top-to-bottom data order to bottom-to-top) must be handled while
+reading data out of the virtual array, not while putting it in.
+
+
+*** Memory manager internal structure ***
+
+To isolate system dependencies as much as possible, we have broken the
+memory manager into two parts.  There is a reasonably system-independent
+"front end" (jmemmgr.c) and a "back end" that contains only the code
+likely to change across systems.  All of the memory management methods
+outlined above are implemented by the front end.  The back end provides
+the following routines for use by the front end (none of these routines
+are known to the rest of the JPEG code):
+
+jpeg_mem_init, jpeg_mem_term	system-dependent initialization/shutdown
+
+jpeg_get_small, jpeg_free_small	interface to malloc and free library routines
+				(or their equivalents)
+
+jpeg_get_large, jpeg_free_large	interface to FAR malloc/free in MSDOS machines;
+				else usually the same as
+				jpeg_get_small/jpeg_free_small
+
+jpeg_mem_available		estimate available memory
+
+jpeg_open_backing_store		create a backing-store object
+
+read_backing_store,		manipulate a backing-store object
+write_backing_store,
+close_backing_store
+
+On some systems there will be more than one type of backing-store object
+(specifically, in MS-DOS a backing store file might be an area of extended
+memory as well as a disk file).  jpeg_open_backing_store is responsible for
+choosing how to implement a given object.  The read/write/close routines
+are method pointers in the structure that describes a given object; this
+lets them be different for different object types.
+
+It may be necessary to ensure that backing store objects are explicitly
+released upon abnormal program termination.  For example, MS-DOS won't free
+extended memory by itself.  To support this, we will expect the main program
+or surrounding application to arrange to call self_destruct (typically via
+jpeg_destroy) upon abnormal termination.  This may require a SIGINT signal
+handler or equivalent.  We don't want to have the back end module install its
+own signal handler, because that would pre-empt the surrounding application's
+ability to control signal handling.
+
+The IJG distribution includes several memory manager back end implementations.
+Usually the same back end should be suitable for all applications on a given
+system, but it is possible for an application to supply its own back end at
+need.
+
+
+*** Implications of DNL marker ***
+
+Some JPEG files may use a DNL marker to postpone definition of the image
+height (this would be useful for a fax-like scanner's output, for instance).
+In these files the SOF marker claims the image height is 0, and you only
+find out the true image height at the end of the first scan.
+
+We could read these files as follows:
+1. Upon seeing zero image height, replace it by 65535 (the maximum allowed).
+2. When the DNL is found, update the image height in the global image
+   descriptor.
+This implies that control modules must avoid making copies of the image
+height, and must re-test for termination after each MCU row.  This would
+be easy enough to do.
+
+In cases where image-size data structures are allocated, this approach will
+result in very inefficient use of virtual memory or much-larger-than-necessary
+temporary files.  This seems acceptable for something that probably won't be a
+mainstream usage.  People might have to forgo use of memory-hogging options
+(such as two-pass color quantization or noninterleaved JPEG files) if they
+want efficient conversion of such files.  (One could improve efficiency by
+demanding a user-supplied upper bound for the height, less than 65536; in most
+cases it could be much less.)
+
+The standard also permits the SOF marker to overestimate the image height,
+with a DNL to give the true, smaller height at the end of the first scan.
+This would solve the space problems if the overestimate wasn't too great.
+However, it implies that you don't even know whether DNL will be used.
+
+This leads to a couple of very serious objections:
+1. Testing for a DNL marker must occur in the inner loop of the decompressor's
+   Huffman decoder; this implies a speed penalty whether the feature is used
+   or not.
+2. There is no way to hide the last-minute change in image height from an
+   application using the decoder.  Thus *every* application using the IJG
+   library would suffer a complexity penalty whether it cared about DNL or
+   not.
+We currently do not support DNL because of these problems.
+
+A different approach is to insist that DNL-using files be preprocessed by a
+separate program that reads ahead to the DNL, then goes back and fixes the SOF
+marker.  This is a much simpler solution and is probably far more efficient.
+Even if one wants piped input, buffering the first scan of the JPEG file needs
+a lot smaller temp file than is implied by the maximum-height method.  For
+this approach we'd simply treat DNL as a no-op in the decompressor (at most,
+check that it matches the SOF image height).
+
+We will not worry about making the compressor capable of outputting DNL.
+Something similar to the first scheme above could be applied if anyone ever
+wants to make that work.
diff --git a/jpeg-8d/testimg.ppm b/jpeg-8d/testimg.ppm
new file mode 100644
index 0000000..bd78ef8
--- /dev/null
+++ b/jpeg-8d/testimg.ppm
@@ -0,0 +1,4 @@
+P6
+227 149
+255
+0/-0/-10.21/51.51.62/72.83/83/83/:3-:3-:3-:3-:3-:2/91.91.80-80-91.91.:2/80-80-80-80-80-80-80-80-6.+6.+6.+5-*5-*4,)4,)4,)4,)4,)4,)4,)4,)4,)4,)4,).+$/,%/,%0-&1.'2/(30)30)63,63,74-85.85.96/:70:70A;/B<0D>2F@2IA4JB5KC6KD4MD5MD5MD3NB2OC3OC3PD4QE5T>1Y?2b@4nB5}E6ŒG8šG9¥E7²F9ºF9¿E8ÆF;ÉF>ËF?ÌG@ÌG@íCNíCLíCLíDKíDIïBFñ>Bõ<Aø;Aø9@ö9?ð;@ë>@â?@×?<Ñ=;µ@.µ@.µ@.´?-´?-³@-²?-°?-­@,ªA.¦A-¢B,�A*›A)˜@*—A*’?/’?/’?/‘>,‘>,’<+’<+’<+”?+”?+”=*”=*”=*•>+–?+—@,”?:•>7—=4Ÿ?1©B3³D3¼D3¿D4º?/¶@2­E8žH;‡H9mB2T8*D3#:659549547326216005//50-72/72/72/61-61-50,50,50,.0-.0-.0-//-//-0/-2.-3--5,-4+,4*+4(*7(+=.1E69L<?n@B|HJ‹MN–NO¢VZ¬cl­n� s�’|£„�°}‡¼|‰¾pz­`a�TLuRCjSKcOG_MH\TR`fdo|}‚�‘�™ž˜£©Ÿ¤¨š�¡’�’�{|jhgUXWERO>UPdUPdUPd0/-0/-10.10.40-51.62/72.83/83/83/:3-:3-:3-:3-:3-91.91.80-80-80-80-91.91.80-80-80-80-80-80-80-80-6.+6.+5-*5-*5-*4,)4,)4,)5-*5-*5-*5-*5-*5-*5-*5-*/,%0-&0-&1.'2/(30)41*41*63,63,74-74-85.96/:70:70@:.A;/C=1E?3H@3IA4JB5JC3LC4LC4KB3MA1MA1NB2OC3PD4P>0U?1^A3jC4xD6†D4“D5žB3¨B3°@2¶@4¼B7ÂC:ÄE<ÆF=ÇG>èAKèAIèCIêDHíDGïBDó@D÷>Cø;Aø9@ö9?ð<?é?@à@@Õ@<Î=8µ@.µ@.´?-´?-´?-²?,°?-¯@-­@,©@-¦A-¡A+�A*›@+˜@*—A*’?/’?/‘>.‘>.‘>,�=+’<+’<+”>-“>*“>*”=*”=*•>+–?,—@-“@8•>5˜>3Ÿ?1«A3µD4½D3ÁC4¼A2¸B6­E8œI;…G:kA3S9*D4$<66;55:4493382271161.61.72/72/72/61-61-50,50,50,.0-.0-.0-//-//-0/-2.-2.-3--5,-4*+4(*5)+<-0C47I:=h<;vDC†JI’LJ�ST§`h¨k{�rŽ‘{¢„�°|†»y†½lv«[\ŒQHsQBkOFaOFaNI_RN_[Yfnotƒ‡ˆ”™•™ž—š ”™���‘ƒ~ojk[]\JVUCXQaXQaXQa/.,/.,0/-10.40-40-51.51.72.72.72.92,92,92,92,92,91.80-7/,7/,7/,7/,80-91.80-80-80-80-80-80-80-80-6.+5-*5-*5-*4,)4,)4,)4,)5-*5-*5-*5-*5-*5-*5-*5-*1.'1.'2/(30)30)41*41*52+63,63,63,74-85.96/96/:70?9-@:.B<0D>2G?4H@3H@3H@3I@1I@1I@1K?1K?/L@0MA1NB2MA1QA2YB2dC2qC3|C2‰A2“@0™<+ :+©;,¯>0¶@4¼C8¿F=ÀG>à?Eá@FãBGæCFêDFðCEõADù?Dú;@û:?÷:@ñ=@è@@ÜA=Ñ@;É>7³@-³@-³@-²?,²?,²?-¯>,®?,ª?-©@-¥@,¡A+�A,˜@*—A*–@)’?/‘>.‘>.‘>.�=+�=+�=+’<+“=,“=,’<+’=)“>*“>*”?+•@,”B7–?5š>3£>2­A4¹C5¿D5ÂC4ÂD6ºF9¯I=›I=‚F;gA4P:,B6&=77=77<66:4493383072/72/62/62/62/52-52-41,41,41,,1-,1-.0-.0-//-//-0/-2.-5//4..5,-4*+4*+9-/>24C79_83l?:|E@ˆIB’NK›Z^œft”n‡Œwž€~¯zƒºs¹dm¤UU‰NEtO?lMBbPEcQHcMH^NK\[[estx…‰ˆ‡Œ†Š�†��…†Š|xzlghXZ[KVTEZT`ZT`ZT`.-+/.,/.,0/-10.40-40-40-51.61-61-61-81+81+81+81+50-50-4/,4/,4/,4/,50-50-61.61.61.61.61.61.61.61.3.+3.+3.+2-*2-*2-*1,)1,)4/,4/,4/,4/,4/,4/,4/,4/,30+30+30+41,41,52-52-52-52-52-63.74/850850961961>8,?9-@:.B<0E=2E=2F>1F>1G=1G>/F=.I=/I=/J>0L@0L@0JD4NE4TD4^D3hE2sB1~A/‡>-Œ9'”9'�9)£<-¬@3³E8·I<ºJ>Ù@CÚACÝCEâDEçCDîACô@Cø>Aü;@û:?÷:>ð=@åA?ÚB=ËA7Ã>5°@,°@,°@,°?-¯>,¯>,®?,¬>-ª?-¦?,£@-Ÿ@,œ@+˜@*–@)”@(‘>.‘>.‘>.�=-�=-�=-�<*�<*�=+�=+�<*�<*�=+“=,”>-”>-”B6–?5›?2¦@2²B4½C6ÂB5ÄB5ÄF:½H>­K@˜J@|F:aA4K;.?9+@86@86?75>64:5294183073062/62/62/32.32-21,21,21,-2.-2.-2./1./1.00.00.10.5106005//5,-4+,6,-:01>45W6-b<3qA7}D9„H@ŒRQŽ_i‹i�ƒs˜|z¬u~·myµ^g¢RQŠMDyM?rN@dPEgQFfLC^GBVNLZ^^fjnquzvx}vz€vwzokoa`bUWYKTUG]V^]V^]V^.-+.-+.-+/.,0/-10.3/,40-3/,4/+4/+4/+4/+6/)6/)6/)4/,4/,3.+3.+3.+3.+4/,4/,50-50-50-50-50-50-50-50-3.+3.+2-*2-*2-*1,)1,)1,)4/,4/,4/,4/,4/,4/,4/,4/,41,41,41,41,41,52-52-52-52-52-63.63.74/850961961<5+=6,?8.@9/B:/C;0C;0C;.D:.D:.D:.G;-H<.I=/J>0K?1GH6KH7PG6XG5aF3jD1uB/|?,‚;)‹:'’;(š=,£B2«G7±K<´M>ÒDBÔDCØDBÝEBâC@ê@@ð>>÷:>û:=ú9<õ;>í?>áB>ÓC:ÅA5º?0¯@-®?,®?,®?,­>+­>+¬>-ª?-¨?,¤?-¢?,ž?+š?*–?+”?*“>)�?.�?.�>-�>-�>-Ž=,Ž=,Ž=,Ž=,Ž=,Ž=,Ž=,�<,�=-‘>.‘>.”B4—A4�@1ª@3¶B5ÁC7ÆA8Å@7ÁB;¸G?©KC�J@uE;Y>3C9-78*@86@86?75>64=53:5294173062/43/43/32.23.12-12,12,,2.-2.-2.-2./1./1.00.00.3205105104..2,,4+,7./901P5*Y9,e>/n@1tB7|KGƒYcƒg~p—xx¬s{¹js¶]e¦TT”OG‚LAyPAjPAhMAeJA`GBYHEXKKWMPU^bc`fbcha`f\Z`TWZOUYKWYL`WZ`WZ`WZ,,,,,,---.-+/.,0/-10.3/,2.+2.+3.*3.*3.*3.*3.*3.*3.+3.+2-*1,)1,)2-*3.+3.+3.+3.+3.+3.+3.+3.+3.+3.+2-*2-*2-*2-*1,)1,)1,)0+(3.+3.+3.+3.+3.+3.+3.+3.+41,41,41,41,41,41,41,41,41,52-52-63.74/850850850;4*<5+=6,>7-@7.A8/A9.A9.C9/C9-C9-F:.G;/H<.J>0K?1FI8GH6MH5TG6[F3dC0lA.t?-{<*‚;)Š;*“=,šA1£F5ªJ:­M=ÉE@ËFAÑFAÖE@ÞC?å@>í==ó9<ø:<÷9;ó;=ë?=ÝB=ÌD8¼A2±>,«@,«@,¬?+¬>-¬>-©>,©>,¨>.¥>-¢?, ?,›>,—?+•>*“>)‘?)�>-�>-�>-�>-Ž=,Ž=,Ž=,�<+Ž=,�<+‹<+‹<+‹<+Œ=.�>/Ž?0’C2—A2 @2­A5»B9ÃC:Ç@:Å@9»@9³H@¥NG�NEoG=R@4?;039-A75A75@64>63<4194083/74/63.43.34/23.13.02-02-02--3/-3/-3/.3/.3/02/02/11/11/32032040/2.-1-,4..5//H4)M5)X8+a<,f>2nGBzYb‚lƒ€uŸ{|´u|Àmu¾bi±[[¡SL�LB�QAnN?jI=cH>`HB^FCX@BO<?HBGJFLJJQJJQIIQFKQGOUISYMaXSaXSaXS++++++,,,---/.,/.,0/-0/-1-*1-*1-*2-)2-)2-)2-)2-)2-*2-*1,)1,)1,)1,)2-*2-*1,)1,)1,)1,)1,)1,)1,)1,)2-*2-*2-*1,)1,)1,)0+(0+(3.+3.+3.+3.+3.+3.+3.+3.+41,41,41,30+30+30+30+30+41,41,52-63.74/74/850850:3+;4,<5-=6.?6-?6-?6-?6-B8.B8.C9/E9-G;/H<0J>2K?3DG6EF6KE5PD4VC2^C2e@.m>,v=,|;)ƒ:)Š;*“=.›B2¢F7¦I:¿D<ÂF>ÇG>ÏF>ØE>âC?ì@>ó<>õ9:ó9:ï;<å@<×B;ÆD6´A/¨=)©@-©@-©@-¨?,¨?,¨>.§=-¥>-£>, ?.ž?-š?,—>,“>*‘?*�>)�>-�>-�>-Œ=,Œ=,Œ=,‹<-‹<-‹<-‹<-‰<,‰<,Š=-‹=0‹=0Œ>1‘D2–C1¡A3®B6¼C:ÅA<ÇB=ÃB=»EA³PJ¥XPŽZOqSIVI@BD97A6A83@72?61=60<4194083/63.43.43.34.13.13.02-.3-.3--3/-3/-3/.3/.3/.3/02/02/00.11/22021/0/-/.,2.-3/.?0)C1'K3'T8,Z<2dGCw]hƒs�ˆ�­„„À|ƒËszÈkq¿ed°VSšJC‡N>kK<gG;cG=`FB]DBX?AP;?H:BE?HGDMHGQIGQHJRGNVKRZOaYNaYNaYN++++++,,,,,,---/.,0/-0/-/.,1-*1-*1-*2-)2-)2-)2-)1-,0,+0,+/+*/+*0,+0,+1-,/+*/+*/+*/+*/+*/+*/+*/+*1-,1-,1-,0,+0,+/+*/+*/+*1-,1-,1-,1-,1-,1-,1-,1-,3/,3/,3/,3/,3/,3/,3/,3/,40-40-51.62/62/73084184192,:3-;4,<5->5.>5.>5.>5,B8/B8/C9/E8/G:1I<3J=4K?3EC6FB6IC5NB4TA3\@2b>0h=-q<.w9*}8)…7*Œ:,•=/›B2 D5µE9¸F;ÀG<ÈH=ÒH>ßF@èC?ð@@î:9î:9é=;àA;ÑD:¾E4¬A-¢?(¦A-¦A-¥@.¥@.¦?.¥>-¤?-¤>/¢>.Ÿ@.œ?.˜?-•>+‘?*�>)�>+�>-�>-�>-Œ=,Œ=.Š=-Š=-Š=-Š</ˆ<.ˆ<.ˆ<.ˆ<.‰=0Š>1‹?2‘D2–C1¢B4®B6¼C;ÄC>ÄC>¾D?»PJ²[T¥e\‘f]s_TYUJFNC>KA@70@72>71=6094.83-63,63.43.34.34.13.13..3-.3-.3--3/-3/-3/.3/.3/.3/.3/02/.0-00.22022000.0/-0/-10.8,,;,)B1*K7.S<4^IHtbn‡z–�Š¸‹�Ê‚ˆÒy€ÐrwÈik¸XV¡GD‹I<gG<fD<aC>^C@[ABV>DP>EMGQSKWUQ^WU`XS_UR^TT^SV`UaZHaZHaZH,-/,-/------------.-+.-+/.,/.,1-*0,)0,)0,)/+(0+'/+*/+*/+*/+*/+*/+*/+*0,+/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+1-,1-,2.-1-,1-,1-,1-,1-,1-,1-,1-,0,)1-*2.+3/,3/,3/,3/,3/,3/,3/,3/,3/,40-51.62/73081+92,:3-;4.=4/>5.>5.>5.?4.?5,@6-C6.D7.F90G:1H;2F?5H@5J@6N@5R>3W<1\:0a7+k9.t8-|8+…9,�;/“=0˜?1›?2¨@3¬B5´D8¾E:ÊG=ÕF>ßD?çB>ë?=íA?çD?ÜE>ÉC8¶C1§B.¡B,¢A.¡@-¢?,¢?,¡=-¡=-¢>. ?.œ<,š=,˜=+•>-“=,�=+Ž=*Œ>*‹<+‹<+‹<+‰<,‰<,‰<,‡;-‡;-‰=/†</†</‡=0‡?1ˆ@4‰A5ŠB6‘F3–E4£F7³H>½F@¾C>¾DA»KG·XR¯f]£qf�th|rfik^S_SCSHQJBLE=D=5<8/95,74-63,33+43.34.23-13.02--2,,1+,1+-2.-2.-2.-2.-2.-2./1./1.02/02/11/11/11/11/11/11/5*2;/3A32C4/J;6]OOymy‹…Ÿ’‘½”–Ó�”Ý‚‰×tzÈjn¸_b©YZ�PHmHBdA>]>>X?AVBHVLU^U`bbqnn}xv†|p€ulyoguh_k_T`Ta[Eb\Fc]G,-/,-/,-/,-/---------.-+/.,.-+.-+0,)/+(/+(/+(/+(.*).*).*).*)/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*/+*0,+0,+0,+1-,1-,1-,1-,1-,1-,1-,1-,1-,1-,0,)0,)1-*2.+3/,3/,2.+2.+2.+2.+2.+2.+3/,40-51.62/80-91.:2/;30=4/>50>50=4-?4.?4.?4.B5-C6.E80G:2H;3H>5J=5L=6O>6Q=4V;2Z90_7/h8.p7.y6-‚8-‰9.’;1–<1š>1¢@3¦A5ªB5³E8¾E:ÉF<ÔE=ÜC=âC?ãD@ßF@ÕF>ÄF8±C2£B/›C-ŸB0 A/Ÿ@.ž?-ž?-Ÿ>-ž>.ž>.š=,™=.–=-“=,�=+�>-Œ=,‹>,Š=+Š=+‰<,‰<,‰<,‡;-‡;-…<-†</…=/…=1ƒ=1„>4†@6‡A7ˆB8‘H7•F7£G:±I@¹HB¹FAºJFµTM²dZªreŸ~o�p~|mlteYgZJZOPLAKI=EC7@>2=:1:7.44*11)23+23-12,/1,/1,.0+.0+.0-/1./1./1./1./1./1./1./1.02/11/11/11/11/11/11/11/5*:9-9<15?53H?:^VTxszŠˆž‘“º”—Î�•×„‹Óx�Æpyºkt¯en¥__yXZsSUjRWjU]j\gmguvr‚v‡€‘‡ƒ•‰}��v†yp€sfteXfW_YA`ZBb\D,-/,-/,-/,-/,-/---------.-+.-+.-+-,*/+(.*'.*'.*'.*+.*+.*+.*+-)*-)*-)*-)*/+,/+,/+,/+,/+,/+,/+,/+,.*+.*+/+,/+,/+,0,-0,-0,-0,-0,-0,-1-.1-.1-.1-.1-.0,+0,+1-,2.-2.-2.-2.-1-,1-,1-,1-,1-,2.-3/.40/51080-91.:2/;30=31=31=4/=4/?40?4.?4.A4.C60D7/F91G:2H;5J;6K<7N=6P;6S:5V72[60c60k6.t5,}7/‡9/Ž:0”<0˜<1œ@3ž@4¢@3§A3±C6¼C8ÇD:ÎC<ÖF>ÚG@×HBÍH?¾E:­C3ŸB0™B.�B/œA.›@-›>-›>-›>-›>-œ?0˜<-–=-”=,“=.�>-Œ=,Š=+Š=+‰<*‰<,‰<,‡;+‡;+…<-„;,ƒ;-„<0‚<0‚<2‚>3ƒ?4…A8†C:‡D;“K<–H; H>­JDµIF´KG´SM¯_V®rg¥�qœ�z��{�Šwr€ocqbVdWPQCMN@HI;DD8@@4::055+/0(01)01+/0*/0+./*./*//-//-//-//-//-//-//-//-//-//-00.00.00.00.00.00.00.00.6*>6+;8.6;63HE>_^Yyz|Š�œ�“²’–ÃŽ•Ë„�Æ}ˆ¾{‰¸|‹´|Œ°ˆ—yƒ�q~‡o|‚n}€o‚€yŽ‡ƒ™�‹¡”‘¨˜�¦”ˆ�Šƒ–ƒ|�{j{iXiW\V<^X>`Z@-.0-.0-.0-.0-.0-.0......---.-+-,*-,*,+).*'.*'.*',*++)*+)*+)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+-+,-+,-+,-+,.,-.,-.,-.,-/-./-./-./+*0,+1-,1-,1-,1-,0,+0,+0,+0,+0,+0,+1-,2.-3/.40/91/:20;31<42=31=31=31=31>3/>3/>3/@3-A4.C60D71E82G83H94I:5L:6M:6N94Q83T50^72e60o6/x8/ƒ90Š:/’;1•=1™?4™?4›?2�@1¥A2­C5¸D7ÀD:ÉF<ÌG>ÌIAÄH>¶F:©C4�B0—B.˜A.˜A.˜?-—>,™>,™=.™=.™=.•<,”<.“=.�=-Ž<.Š=-Š=-ˆ<,ˆ;)ˆ;+‡;+‡;+„;,„;,ƒ;-‚:,�;/€<1€<1�>5ƒ@7ƒC:…E<†F=’M>•I<œH>¨IC¯LG¯PL¯\Tªj^§€o �y˜š‚Žœƒ„–€z‹ym{lam_UYHQUDKO@EI:@D6;=057,13(01)/0*/.).-).-).-+/.,0/-/.,/.,/.,/.,/.,/.,/.,/.,0/-0/-0/-0/-0/-0/-0/-0/-8*A6):3-1961HJ=bfX{€y‰‘“Œ“£�–²Œ”¸ƒ�³��±…™²�¤¶�ªµ•§§�¤£Œ ž‡ž–‚™�}˜‰�œ‹ˆ£�”°š–²›”­—‹£‹…›†’~k|iUfSXT7ZV9^Z=+/2+/2-.0-.0-.0-.0-.0...------.-+-,*-,*,+),+),+),*+,*+,*++)*+)**()*()*(),*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*+,*++)*+)*+)*,*+-+,-+,.,-.,-/-./-./-./+*0,+0,+0,+0,+0,+/+*.*)/+*/+*/+*/+*0,+1-,3/.40/91/:20;31<42=32=32<20<20=20=2.=2.?1.@2/A4.B5/C60D63C84D95G96G96H94K84N51V72_60h70r7/}:1†<1�=2�>2˜?7—?5—?5—?3šA3£C5ªD6³E8ºE;¿F=ÀG>»F=°D8¤B5™@0–@/–A-–A-–?,•>+•<,•<,–=-–=/”<.’<-�=-Ž<.‹<-‰<,ˆ<,ˆ<,‡;+†:*†:*†:*ƒ:+‚:+‚:,€:.;0€<1€=4?6‚B9ƒD;†G@‡HA�LA’H?˜HA¤KGªOLªWQªf]¥wh¡Œw˜›€’¥‰Š¤‡„ž…|’}t‚qlte\eRV_LMVCEL<?F6<@27;-68-01)00(.-(/+(/+(/+*2,,3--1-,1-,1-,1-,1-,1-,1-,1-,0/-0/-0/-0/-0/-0/-0/-0/-9*?5)73*-66*GL6_iPx„nˆ“…�—–�™¢�™§†–¥‡›¤�ª©šº¯ŸÁ±š¶¨š¶§›·¨˜¸£‘±š‰«’‰«��²”’³”•´•�­�ˆ¢…ƒ›�{’xgzdQcMTS5VU7XW9,03,03,03,03./1./1./1///..........-+.-+.-+-,*-,*-+,-+,-+,,*++)**()*()*()+)*+)*+)*+)*+)*+)*+)*+)*,*+,*++)*+)*+)**()*()*(),*+,*+,*+-+,.,-.,-/-./-./+*/+*0,+0,+/+*/+*.*)-)(0,+0,+/+*0,+1-,2.-3/.40/:12:12;23<42=32<21<21;1/=20<1/<1->0-?1.@2/A30A30?61@72@93A96A96B94E74G51O61W6/a6/j8/u9.€</‡=0Š>0•>7•>5“?5’@4•B4™C4ŸC4¥D4ªB5²C8´E:±E;©C7 @4˜?1•?2“A,’?-“=,“=,“<+“<+”<.”<.“;-’</�<.�;-Š;,‰<,‡;-…<-†:*†:*…9)ƒ:)ƒ:+�9+:+9-€<1<3?5�A8‚C<…F?†JB‡JE�JA�G@—HC¡NJ©VRª_Y©pe£„r›•{’¢…‹ªŠ„©ˆ€¡„~–~z‡uszjcqZ]iSR^JHT@BK:>E5:@29<134,22*1.)/+(/*'0**3*+4+,1++1++1++1++1++1++1++0,+1-,1-,1-,1-,1-,1-,1-,/.,;(;5(23+(56$CL-\hDt„`…”wŽ›‰’ž”�Ÿš�ž–�¥—•µ�¡Æ¤¦Ð¨¥É¯¦Ê°§Ë¯¢Éª—¿�‹³�ˆ°‹�³ŽŽ²Ž�²��¬Š„¢€€™{wŽrdx]MaHQQ5QQ5RR6,03,03,03,03./1./1./1./1/////////0/-/.,/.,.-+.-+/-..,-.,--+,,*++)*+)**()+)*+)*+)*+)*+)*+)*+)*+)*+)*+)*+)**()*()*())'()'(+)*+)*,*+-+,.,-.,-/-./-./+*/+*/+*/+*/+*.*)-)(,('0,+0,+0,+0,+1-,2.-40/40/:12;23;23<34=32<21<21;10<1/<1/<1/=/,>0->0-?1.@2/;60;62;83<94=:5=:5?82A60F5.O4-W5+b6+n8,x:-<,„<.’:6‘<5�=5Ž@4�A4‘B3•B2™@0Ÿ?1¦@4ªB7ªB9¥@6�?5—=2•?2‘@-’?-‘>,’<+‘;*‘;,“;-“;-‘;,�<.�;-‹<-‰;.‡;-„;,„;,…9)…9)…9)‚9*‚9*�9+~8,}9,=1€=4€@7�B9„E>…HCˆKFŠMHŒIAŽGA˜JF¢SOª\X«h`©{n£Žy—��Ž©ˆ…¯‹«ˆ~£„€˜€‹w{nixacr[ZhQP]IIUACL;>D6<?467/44,30+0+(1)'1()3)*5+,2)*2)*2)*2)*2)*0**0**0**1++1++0,+0,+0,+0,+0,+0,+;&57(/4-%46?I$Ue8p�T‚’k�œ}‘Ÿ†’¡Œ�¡ˆ�¨‡•¹�žÉ“¢Ò”©Ò°¨Ò®¥Ñ­ŸÌ¥‘¾•ƒ°…‚­‚†±„†¯ƒŒ±ˆ‰¬„�Ÿ{{”tqˆk_sWJ^CMM1LL0KK/,03,03,03,03./1./1./1./10000000000/-0/-0/-/.,/.,0.//-./-..,--+,,*++)*+)*+)*+)*+)*+)*+)*+)*+)*+)*+)*+)*+)**()*())'()'((&'*()+)*,*+,*+-+,.,-/-./-./+*/+*/+*/+*.*)-)(,(',('1-,1-,1-,1-,2.-3/.40/510;23;23<34<34=34<21;10;10<1/<1/;0.=/.=/,>0-?1.?1.96/:729839839:4:94;83>71A2+I2*S2)^4(j6)s8*|:*~;+�84�:5�=4Œ@3‹B3�A1�@/”>-˜<-Ÿ=0¥@4¦A7¢@7œ>4—=4•=3‘@-�?,�=+�<*‘;*‘;,‘;,’<-‘;.�<.�;-Š;,ˆ:-‡;-„;,„;,…9)…9)‚9(‚9*�9*€8*~8,}9,€>2?5€@7‚C<ƒG?†IDˆMGŠOIŒIC�HD˜MJ¥UT¬a^­ng«�s¤•€–¡ƒŠ¬‰‚°‹|«‡|£„�™��y‚ql{dgv__nWXeQP\HIRAAG9=@579.66.41,1,)1)'2()3)*4*+2)*2)*2)*2)*2)*2)*2)*0**1++1++1++0,+0,+0,+0,+0,+:&27(+4."47=HRb1l~J€’b‰™rŽ�|�Ÿ‚ŠŸ~Š§{�·€˜Æ…œÎ…œÉ¢šÉŸ™Èž”Ã—‰¸Š®€‚°�‹¶ˆ‚¬~ˆ¯ƒ‡ª€~œvu�ml„dZnRG[?IL/GJ-DG*/0*/0*/0*01+01+01+21,21,32-63.63.63.52-50,4/+4/+8.,7/,6.+5-+4,*2-*1++0,-0,-.,/--/-,1,+0*+/)*.()./(0/(//(//(//(//)-.)-.*+/+,-,*-,(.-).-)-.(./)./)--/--/---.../-.0/-2.+3.+2-)4,)5.(7.)8/(;0*;1(<2)<5+=4+>5.>5.>5.=4-<3.<1-=2.<1-<1/;0.=/.>0/>0/?11H-&C1';5)2:++=-(=.-;.45-?-+H()R%(X((Z.+Z8.[A2\G6wC-{B.„C1�A3’?1•;0–:/”8+“;-‘>.‘B1‘D0‘D0�B.�?,�<*Ÿ63›83”:2Œ<1…@1B0|A/|A/‚C2„A1ˆ>1‰=0‰;/ˆ:.‡9-‡9-v:/|@5u=0n9)s@/s@/t<+{@0{<-ƒ?4ˆD9‹H?ˆLA„NB�QC€RC—HK•TR�d]…ue{…lw’sz�|€£ƒ‰¦ˆŽ¥‰’¤Œ‘¥Œ‡¤ˆy¢‚kŸ{a�whŽea†]\zV[sS]mR[cLVTEPH=J;6G53B,/=&,:#+:#-9#/8".#/-#-,$-,&*+))+-(.1'/2'/4'06&14'14'13'32(32(30(3.)-0,-0,)//'=>0WZErx\‹g�œs‹žpŒ¢qŒ§r‹¨r‰ªs�³{›¾†£¿Ž ¾Œ›¹‡’²€‹­{†ªz„ª{…ª~„§}…¥€€ž|z“vr‰oi{e[jWLZIKO@CG8>B3/0*01+01+01+12,12,21,32-43.63.74/74/63.61-50,50,7/,7/,6.+6.,5-+2-*1++0,+0,-/-./-0--/-,1+*/)*.()-/(//(//(//(//)-/)-.*+.*+/+*-,*.-).-)/.*./)./)./)..0....../-./.,/.,1-*3.+3.*5.(6/)8/(90);0*<2)=3*>5,>5,>5.>5.>5.=4-<3,=2.=2.<1-;0.;0.;0.=/.>0/?10F/'D0)A3*=4+96-85.83-<1-?-+D*)K)(P*'U.)[4-_:1c?3s@+xA-€A0‰?2‘?4”;3”:1“;1�9.‹<-Š>.ŠA0‹B1�B/ŽA/�@/š93—:3’;2‹=1„?0‚@0@/�?/„A1†>0‰=0‰;/‡;.„:-‚:,‚:,w9.x<1s9-n9)r?.s>.q9*u:,}=1„@5‰E:‹H?‰K@†MB„PC�QC›DJ›QR–d]�vfƒ‡p}”w~ ƒ¦…ˆ§ˆŽ§Š’¦‹“¥�Œ£‰‚Ÿƒwœ}o˜xa•g\�`VƒZU}XWyXWpSPbJKVECI;@A998340-0,+/+,.)--(,*,+)+***,+),-(,/)-2(03(03(02(02(10)1/*1-*1,+3,+32-12./0,)--%9:,TWBox[€‹i‡–o†™l†žnˆ£p†¤p„¥pŠ­w“¶€›¹‡˜¶„“³�Œ®{†«xƒ§w‚¨yƒ¨|ƒ¦|„¤�{x’uqˆnh{eYjWL[HGK<@D5:>/12,12,12,12,23-23-43.43.54/74/85085085083/72.61-80-80-7/,6.,6.,3.+2,,1-,1-./-.0.1..0--/,+0+*/*).1'//(//(//)-/)-/)-.*+.*+0,+0,+/.*/.*/.*0/*/0*/0*/////////0./0/-1-,1-*2-)4/+70*90+:1*<1+=3*>4+?5,?6-?6-@7.@70?6/>5.=4->3/=2.<1-;0.;0.;0.;0.<1/=20C2*E0+H/+L,-N+/M*.J*/E+.A-,@.*@/(C/(M/'Y0*d1-j30i;+o;-w;0�=4‰<4Ž;5Ž94�:4‹;2‡=2†>2…@1†A2‰A3ŒB5�C6‘=2�=1Œ>1Š>0†>/…=.…=.†=.ˆ<.‰;.ˆ:-‡9,„;,€;+~=+z=*}=3z<1v:/u;-x@1x@1v<.v;-?3„B6ŠF=‹H?ŠJA‡KA‡NC†PD�DH�QQšc^’ug‰„n�‘t~�}€¥ƒ„©‡ˆª‰�©Œ“§Œ‘£‰‹�ƒ„˜€”{a›k[•eX�aV‰`W…`W]QtVMiPC[E=RA6F9/<2*5-&1+%.)$-(1&*1&*1&*1&*1&*1(-2).1+//*0-+0,+0+,0),1(-1&.1&.14.24.0.*'**"66*PUAmv[~‰i€�k~“h™jƒŸn€ n~ m€¥q‡¬xŽ®|‹­zˆªw„©v�§t€¦u¦w€¥y¤y€¢}}›yw’sp‡mh{eYkUL[HEG:=?28:-23-23-34.34.34.45/54/54/650961961:72:72:51940940:2/91.91.80-7/-4/,4/,3/.3/.3/01/01/00.1..0--/,,.2).2).2).0*.0*,0*,0*,/+*1-,1-*0/+0/+10+10+10+10+11111100010.10.2.+2.+3.*91.92,;2+<3,>4+@6-@6-A7.A8/A8/B90A8/A81@70>5.?4.=2.=2.<1-;0.;0.<1/=20=20?5,E2.O-.W(0]#/\"0W#/L'.C/.:3-55);5)E1(U.'c+*l*+e;/j;1s=3}<6…;8‰;9Š;7ˆ:6‰>9†?9…B9ƒC9…B9†B9‡A9‰@7†B/†B/‡@.‡@.‡>-ˆ<,‰:+‹9+‹8*‹8*ˆ9*…9)€<)z=(w?(t@(ƒ=3{7,x8,z</v;-w=/{A5{?4€B7„D:‡G=‰I@ˆI@ˆLB‰NF‹PH“OL”YS’f[�sb„€g}Œmz˜v{¡|©ƒ�«‡†«‰‰«Š‹¦‡Šžƒ†˜~„”zm˜mi”ie�gd�efŒgc†e]~_Zw[PhPI_J@Q?8D60:/-5**/(),%7$(7$(5%(4%(1&*1(+/+,.,-*+-(,-'--%-/%-/$./$./$./1(+1+-0+(.+$88,PUAiqYvƒe{Œhy�f{–iœn}Ÿmyžkz m¥r‚§s€¥q}¤o}£p}¥s~¦t~¥v}¤w|¡x}Ÿzz™wu�qn‡jg{bWkRK]GGE9?=1:8,45/45/45/560560560761761872:72;83<94<94=84<73<73<41<41;30;3083072/61.61.5106216213122011/00.//-.4+.4+.4+.4+.2,.2,,2,,2,,3/,3/,3/,10,21,21,32-32-22222032032032.51.61-61-;4.<5-=4-@6-A7.B8/E8/E8/C:1C:1E;2D:1C90B71@5/@5/>3/>3/=2.=2.=20=20>31>31>7/C41O/2Y*2_%3`#2Y%1N+1B3077-39+68*?5)N1)]-)e+)c;3h<3r=7z=:‚<<†<=‡;;…;:‚;9>8€A:C;‚C<ƒB<…@9„?8E/�D/�C.ƒ@-†=,‰<,‹9+Œ9+Œ6)Š7)†9)‚;)~=)w?(sA(qB(…6/|/'�8/ƒ?4w5)s5*}A6}C7E9�G<ƒI>„J?…K@‡LDŠOGŒSJycL~hS�oY�u]�}b�ˆi„•u‚ |¥~|©€~¬…­†€ª„¥€|ž}{˜y�n}ŽlyŒlwŒkwŒmt‰joƒgl~dbqZ[hTSZHIK=B@4=6,8/&5+":&(8%'6&'2&&0(&-)(++)).*'+*&,*&,*'+*'+,)*,**,**,-#$2*(50,85,BC5UZFfpWn}^tˆcqŠbt‘ex˜iw›ks™hs›iwŸmz¢mx lwŸkv¡ly£q{¥u{¥w|£wxžuzœww–tqŽom†hd{_WkPJ^CFB9>:195,560560671671782782872872983<94=:5>;6>;6?:6>95>95?74?74>63=52;62:5294194184184195484373243132021/6-.6-.6-.6-.6-.4..4/,4/,40-40-40-52-32-32-43.43.431431542540841850940:5/=60?6/@7.B8/C9/F90G:1H;2F<3F<3F<3F<3E;2C90B71A60@5/@51>50=4/=4/>42?53?53=82A64I35Q16V.6U-5R/5J22A62::08<.9;-?9)H6*P4)U3)]2+c4.k62t76}77‚89ƒ79�78}75{:6|=8{?7@9ƒ@:…@;†?;|E0}D0€C0‚A/…=.‡;-‰:-ˆ9,‡8+…9+‚:+<+{>+x?+uA+tB+‹2,‹2,¡LE§XQŠA8|90‚F;€J>yH:zJ<{M@|NA~NB‚PE‡UJ�YN_uNgwRtzX€{^Š|b“�i›�s›—|�™zˆ |ƒ¨¬ƒ|¬‚x¨~t£yq vŠ�pˆ�o†�nƒŽp€�p}�px‹ms‡kk~bgu\_iQWZGPM<H@3B6*>0%:,+7,*5+)1,(-,'+.').((/().(+-*,,*/+*3)*6',7&,9&,2)$<3,E>4JF:QR@]bLgqVizXmƒ]j…\j‰]p‘bq•eo•do—eršhu kr�hq›itžlx¢rz¤vy¢vyŸvvštw™tu”ro�kj…fc|^UlOJ^BHA9@91;4,671782782782893893983:94:94=:5>;6?<7?<7@;7@;7@;7B:7B:7A96@85=84=84<73<73<74<74<74;74:6395284173080.80.80.80.80.80.61.61.61-52-52-52-63.63.54/54/540540651952:72=84=82@93?80A8/C90D:0E;1H;2I=1I=1H>4H>4H>4G=4F<3D:1B8/A60B71@70@72?61?61@72@72A83=84@85B86D97E:8G96G96E:4C90B90B:/B:-D;,F:*H;*H;*].&b0)n3/x73ƒ98‰;;Š<<‰>;‹A>†A<?6}=4~;3‚;5ˆ=8Œ>:~C3€B3€A2ƒ?2ƒ=1„<0ƒ;/�;/;.|=.{=.|>/|>/|>/}>/}>/—.*£;8ÎkfÙ~y­ZTŒC<ˆLAN@tJ:qM=pQ?qR@tSB{VD‚[J‰_OUOe€Uz~[‘y_¥ra³of»rk»xo¶…vª�z ›~•£€Œ¦�ƒ¦~}¢yyŸvŒ�r‹�rˆ‘r„“r€•t|–sv”ps’pl‹ig„eby\\lQU_GMP;ED0A<)>3-<3,92*41(01).1(+1'+0)/0*2/*6,*:*+@'+D%+G$+H#+A7+LC4WP@[XE`bLgmQiwVj{Wl‚[g‚Wf†WjŽ^n”an”an–bršfržko›hnšiqœnw¡sy¢vxžuu›ts—su—ts’pn‹li„cb{[TmMH`@MD=E<5@707827828938938939:4:94:94;:5>;6?<7@=8@=8A<8A<8A<8A<8A<8A<8@;7?:6>95>95=84>95>95>95>95=84<73:51940:0.:0.:0.91.91.91.91.72.61-61-63.63.63.74/74/74/540651961;83<94?:4@;5B;3A8/B90C9/E;1H<0I=1J>2K=2K>5K>5J=4J=4F<3E;2C90B8/B92B92A81@72@72@93A:4A:4?74>95=<7>?7?@8@@6D@5J=4J70N5.Q6-Q6+O8*M:+I<)H=)l3(r6,~;3‰@:•DA›HDŸJGŸLH QJ—MD�D;„;2‚8-…7-Œ91�;4…?7…?7†=6…<5ƒ=5€=4|>3y?3vA3uA3uA3y?3}=3ƒ:3‡83Š73Ÿ%$´<;í{zþ•’Åhc–G@‰K@wI:mN<gR=dU>fW@jX@r\E}aL„eQj{O{{U™w\´l`Ì^_ÚR\áM[àO^êmuÜxxÎ…~¿�€²–€§—}ž•x˜“u•Žr”�r‘‘u�”u‡–u�—s{–sx–rq‘lp‹hi�adtW]gLVX@LJ3GB.L40H3.D3,?2*:1(70&40'40'81):/+?-+C++H(+M%-O$-Q#-PE1[P:d^FgfJilOnuTm{Wl~Vk„Zg„Vg‡Vm�]p•ap—br™dv�hrœlo™km—ip™mw�tyŸxw›wt–us•tu”ts�qoŠki„cb{[TmMGa>SJCKB;F=69:49:49:49:49:4:;5=<7=<7=<7?<7@=8@=8A>9C>:D?;D?;E@<E@<E@<D?;D?9C>8C>8D=7B;5B;5B;5B;5B;5B;5A:4A:4A83A83A83@72@72>71>71>71<71<71;60:5/85085074/74/761961961:72<71=82A:2B;1C:1E;1F<2J>2K?3L@2N@3N@3M@7M@7L?6K>5I<3F<2E;2E;2B90A81A81?80?80?82@93@93<5/LE?IB:E<5OB:K:2J3+\>6Z5-`5.`4+^/'\0%b8,g@1gB2‹I;�G;–I?žLAŸF>›>7š=6žD;¥ND£QE¨VH«YK£PBš@5˜:0ž=4’9;�9:Œ67†54„96ƒ@:{@8o?3oC6lB4m?2u:2�74Œ35’-3–(1ÏEEèbaÅEDÍWUáyv«VO†F<‚WGlS=f\CedFgfHgbEm_DyeL†nVŽdK­p]ÍphÞW]å8Kð(Dü&Hþ+Lþ<WðG\éXeånrà|zÙ�}Ö†Ø‰‚¸„wµ…w³ˆx®‹x¨�x£ŽyŸ�y›‘xŽ‡mŽƒm�~i‰taƒgY{YMtLBpE<r;>d02b22\31L)'D'#I2,J70F5.E2,E0+H0.I-,I)*O+-V24VK/`W:f_BgdEkoLu}Xu„]o�Wj„WlˆXnŽ]q“`s•bu˜bušdv›eq–ks˜ms˜oq•os•rw™xz™zy–zx•yqŽrm‡jj„ghƒdazZTnKIc@TKBSJAPG>9:49:49:49:4:;5;<6>=8?>9>=8@=8A>9A>9B?:D?;D?;D?;FA;E@:E@:E@:D?9D?9E>8E>8E>8E>6E>6D=5C<4D;4D;4C:3B92B92B92B92A81A81@91@93>71<71;60;60:5/85.74-74-96196/96/;60<8/>:1A:0C:1C;0E;1G=1J>0L@2M?2NA1NA1N@5N@5M?6J=4I<3H;2E;1E;2C:1B90A81@91@91@91?;2?;2C:3G81I0,V..j68u99{;;†ECƒD?„H@…I?†G>ŽJA›NH£PL¥MK’E3”C2šB4 B6 >3�6-�7+¡<0£C5›@.™@. E3¦F6©E5¯H9¸N@´KR¯GN¥@F™9=‘8:Š?<€A:r@5k?2uK=€NC�@:‚,-“(0µ8FÒK\àJIáMMÌ>=Ã>?Ò_\µXQ„@5€UDvbJa]@Z_?ekIonOshJ{fK†kPÌ]VÚ][êSZó<Nü'EÿDÿHÿ!Kÿ(Nÿ.Nù9RöF[òM^ëO]êO]ëS`ÝakÛclÚgnØkpÓnrÑstÎvuËwwÌ{zÌwzËuxËotÊirËcnÊ^kÊ\iÆ`n´Ra¦JWšGQ�DK„FIk79FS2-L0,F2+I6/J91I;2M>7SD=]P.dY9ga?ifCnrMz‚[z‰bt†^r‰]oŠ]oŒ^qŽ^u’bw•cw•cw•cr’mw—rz˜vy–w~˜}ƒ�„…�‡ƒ›…�™ƒz’|q‰ql„jh�c`yYTnKJdAWQEVPDUOC8938938939:4;<6<=7?>9@?:@?:B?:C@;C@;C@;D?;D?;D?;FA;FA;FA;E@:E@:G@:G@8F?7IB:HA9H?8G>5F=4E<3E<3D;2D:1D:1D:1C:1D;2D;4D;4C<4?80?80<71;60:5/:5/94.94.96/96/96/;7.<8/@9/A:0C;0E;1F<0I=/K?1M@0M@0NA1M@0N@5M?4L>3K=2I<3H;2E;1D:0C:1C:1A:0A:2?;2@<3@<3A=4SE<P40g35�AG°JWÇS`Ï[fÇ^c›B>–I?•MA›OB¬RJÃSRÏNSÒENœE2�B0 @0¥?1¦:-¥7*¦8+§=/¬E4¡>+˜7$�:%¥>+®@/³B2¹C5§/8±9B¹DL¾KR¸NRªLL“B>}:1u;/q9,s5*�2-›47º<GØEWéLaåFCÒ41Ò:9À21ÉMKÈb]”J?‹\JzdLebCbfEpqOysS~iL‹iNœrZûW`úNZû@Qþ3Iÿ-Hÿ-Nÿ*Mÿ&Hÿ-Mÿ,Ký.Jü2Lù1Kù.Kû.Lþ1Oø=Z÷?[öB]ôFaòJcñMfïQhíSkêPhéOiéLgêKiîKjôLoùOsüQuþh…ô_|æZtÖUkÎYlÊdr¨R[r-0]''X1,T<2N@5?<-7:)<C1GP=[N,aW4e_=heBstR†d~ŒhwˆdxŒgsŒer‹cr‹ct�cw�fz‘gz‘e~•x„›ˆŸ…� Š‘¤�—¨–˜©™–§—‘¢’‡˜†z�yn„mg~b^wYTmMKfCXUFXUFYVG7827828939:4;<6=>8@?:A@;BA<DA<DA<DA<DA<E@<E@<E@<GB<GB<GB<FA;FA;HA9HA9HA9LC:KB9JA8I@7H>4G=3F<2E;1D:0D:0E;1E;1D;2E<3E<3E<3@91?80?80<71;60:5/:5/:5/96/96-;7.;7.=9.@9/C;0D<1F<0F=.J>0L?/M@0M@0O?/O?/O>4O>4N=3K=2J<1G:1G:1D:0D;2D;2B;1B;1@<3A=4A>5A>5Q9/X+&‰:?ÅP`ãOeñOfíPcÐGO¢20”:/Ž?.–C3®F=ËFGÞ>Hã2B§H6§F5©B3®@3°?1²>1³B4´D6²G5«B/£<)¤;&©<(­:(¯5&®3$¸7<»8>½7>½6=¿<BÅJMÄTS»ZT—@7ˆ6+….%œ62ÃHKÞNXå@Qà0Eß:4Ð-(Õ74Ê64ÈD@É\U©WK�XFtX@rgIysS|qQ�hJ�dK©oYÂ~kÿGVÿAPú9Jû8Iÿ=Nÿ@Qþ:Nö5Hÿ@Sû:Mú4Ký3Kÿ0Jÿ-Iÿ-Lÿ1Sÿ1Tÿ1Tÿ3Wÿ3Wÿ6Zÿ9\ý;^ü<aþ@fü=fû<eû<gý<iÿ?mÿBpÿEsÿLuÿNuÿRvøPqëRnè`xÙdv·Wb|15h0/U3*L:,BA/:C.5G/5L2VH+_T6i`CokN||`ˆŽr‡‘v}‹qz�q|�s|�sz�ozŠm}Œmƒ’s‰–x•£Œœ©•£®�¦±¡ª´©±¸°°·°­´­¡«¢” ”ƒ‘‚s„qh|c]tWSlLLgDVWEWXFYZH671671782893:;5<=7?>9@?:BA<DA<DA<DA<DA<FA=FA=FA=FC<GB<GB<HC=HC=JC;JC;JC9LC:KB9KA7J@6H>4G=1H<0G;/E;/E;/E;/E;1E;1D<1D;2D;2@9/@91@91?82<71;60;60:5/;7.;7.;7.<8-?8.A;/C;0D</G=1I=/K?/M@0M@/P@0O?/O?/O>4N=3N=3J<1I;0G;/F90D:0D<1D;2B;1@<1A=2A>5B?6C@7_4-t42¯KSâYiðH_ð:Qá2C½#+¬/)š9(�;&•=)¬@3ÈA=Ý:?ä0;¨D4¨B3«?2®>2´?5¹C7½G;»J<¬>/ª?-¨=+¨:)ª9'²:*¹;-¼</ËEBÏCBÒ=?Ñ6:Ö7<àAFâLNÜRPÁD>ÃLDËTLÑTNÙKJÝ>Cã3>è.<Ù5+Û7.Ò0+Ò94Á82µ@9µ[P”UDxO9~dI„lP�bF�]F®eTÍqdÛsjü<Iô9Dì8Aç<DæCHäHKäJLåIMðLSïDMð:Iö5Hû1Gÿ-Fÿ0Jÿ5Pÿ7Vÿ7Xÿ7Xÿ8Zÿ:[ÿ<_ÿ>bÿ?eÿAiÿBkÿBmÿAmÿ@oÿ@oÿ@qÿAqÿBnÿ=hÿEmÿJpöGhíMièZrÛbs½YcŒ@D]($M-"PC2PR=CO76H.WH1eYCujT€{gŽ�y˜œ‹”�Œ‡”ƒ��~‰—ˆŽœ�Œ™ˆ‡’‚Š“‚—žŽ¤¨—²¶§¸¼®¿Á¶ÀÁ¹ÂÃ¾ÅÅÃÃÃÃ¾¾¾²´³¢©¢�—Žy‡vh{e\sWTmONiHTYBUZCW\E560560671782893:;5=<7>=8@?:B?:C@;DA<EB=FA=GB>GB>GD=GD=HC=ID>IE<KD<KD<MD;LC:KC8LB8KA5L@4K?3J>0I=/G>/G>/F<0F<0E;/E;1D<1C:1B90A:2@91@91?82<71;60;60;7.;7.;7,<8-?8.A;/D</F<0H?0J>0K?/M@0NA0P@0O?/O@-P>2N>1M<2L;1I;0H:/F90C9/C;0B<0B;1@<1A=2A?3B@4C@7t50–FEÆY_ßUbã@Qä5FÚ0;À*+¯1%Ÿ9#•;!”: ¡=&·=.Æ90Ê2- :,¢:-¥9-¨6,°91¸A9»E;·E:­?2«@0§<,¤6'ª6)·=0ÄD9ÊG=¾9*Î@4áD=ïA@ö<?ø7<ï05á-.Þ63âH@èTJåNEÜ=7Ü0.å.0ñ27Ö3$Þ</Í,"Ñ7/Á2,±6/Ég\¶m^ŒXC„\C�W?‰R=©\LÑjaãfbáUTúAIñ>Dâ<@×?>ÎC>ÍJB×RMåZWéPRìELï;Gõ6F÷2Dø/Bû1Gÿ6Lø:Tø:Tø:Tû:Wþ=\ÿ?aÿBeÿDiû<eû>hú?júAm÷@nõ?oò>mï=mÿFnÿ:aÿ>dÿInÿJløMmòSoæXnëp‚Å_j˜ILt:6\6-O9+OD2SN:`PArdWˆ|p”Ž‚Ÿœ“¦§¡¡¦ ”�˜”Ÿ›�¨¤¦¯¬¦¬ª¤¦¥§§¥µ´°ÄÀ½ÍÉÀÒÍÇÕÐÌ×ÏÍÖÍÐ×ÎÓÑÊÑËÆÌ¿½À°²±˜Ÿ˜€Œ€m~k^u[VoQSlNU_DV`EWaF560560560560671893:94;:5=<7@=8A>9C@;DA<GB>HC?HC?GD=HE>ID>ID>JF=LE=MF<NE<ME:MC9MC7OC7NB6MA3MA3N@3JA2JA2I@1H>2G=1F<0D<1D<1C:1B;1A:2@91?82?82<71<71<8/<8-<8->7-@:.B:/D</F<0H?0K?/M@0NA0NA0P@0O@-O@-O=1O=1M=0L;1I;0G9.E9-C9/B:/A;/A:0?;0?=1@>2B@4@@4+)¨JKÁSV¾=BÀ/6Ç.3Ä./»0)ª1 £9!›=!–=˜= ¡=#¥;#¦6"�6- 8/¢5.¦3,®71·@:¹B<²@6±B7­A5¨</¦8+¯:0½B:ÄC=Ä@;Â@(Í?+Ù5)ä)$ñ #ÿ")ÿ'/ÿ-2ò((é.)ã2*ß4*à4*ä1*é0+î.+Õ6#×5&Ò2$Ð6,Æ6.½>7È`UÑq¤eSŽWC‡N:¡XGÊe[ãa_ëPTëBIùDKí@DÞ@?ÑB<ÅB8ÁB9ÌIAßPLìKPô@Kù9Hý7Hþ5Hø3Eö7G÷=K÷9R÷9Rø7Rú7Uý7Xÿ9]ÿ<aÿ=gÿ@kÿ@nÿBqÿDtÿCuûCuùCv÷BuÿFgúAaþEeÿJlÿJkÿUtÿ^zö\vôi~éo~Önw¯]a„CAh6/hB7vTHwf_Œ}v£–�¬¤¡²®­¶¶¸²µºª¯µ°·¿¶½Å½ÁÊÂÂÌÃÂÊËÅÏÕÎÖßÕÞäÙÕèÝÛéÝÝæÚÞåØßä×àáÔÞÙÏØËÄË»¹¼¤¦£ˆ’‡t‚qexb[tWXqS\iK\iK[hJ560560560560560671872983<;6?<7@=8B?:DA<GB>HC?ID@HE>HE>ID>JE?JF=MF>MF<OF=NF;OE;ND8PD8PD6PD6QC6QC6OC5MD5KB3JA2H>2G=1E=2D<1C:1C:1A:2A:2@93?82<71<71<8-<8-<8-?8.@:.B:/D</F<0I@1K?/M@0NA0P@0PA.O@-O@-O=1O=1M=0L;1H:/G9.E9-C9/A9.@:.@9/?;0?=1@>2??3@@4”67Á]_ÈZ[¯78®,,µ/,±,#°0#¯8$®B(©G* G'šF$šF$–C!”? Ÿ81£;2¦92¨50°:6¹B>¹D=±>7«<3¨<2¦</«<1¸F<ÆKDÄE>»72»:Ê<$á:*ñ.(ÿ$&ÿ'ÿ'ÿ%ÿ%(ù,)ñ2*ë5*è3(è2'ê/&ì-%Ü=(Ñ2Þ>0Ñ5)Ê7/Â?7¯C9Çqd²m]–YF™VE¿i\ÝlfãSSë@Hù?Lï<Bä:=×<:Í@9Á>4¹6,½4.Î44ïBHø8Gÿ2Fÿ3Hÿ5Iú7Gö<JöBNÿ>Yÿ=Xÿ:Wÿ6Wÿ5Yÿ5\ÿ6_ÿ7eÿ;kÿ:mÿ;oÿ<rÿ<rþ=tû>tû>vôEbýNkÿTqúIfð?\ÿRqÿfƒÿf€ô^wêbváky×s{Ärvªfe”ZV‰TN’€~¨™–¾°°Ä»¼ÆÁÅÈÇÍÅÈÑÀÄÏÆÌØÈËÚËÍÜÓÐáÚÖåäÜëêßïîáòòäãõççöçêóâèñàêïßêìÜéå×äÓÉÒÃ¾Äª¬©�—�y‡vi|f`w[\uWbqRapQ`oP201312423653875984984983;:5<<4==5??5AA7CC9EE9EE9HH@HH>HH<HI9KJ6LK6MM5MM5LK7IG8EE;HGELIPKIWFCVA=TQF4NC1JA0KB1MD5LB6F>3B90E<5C:5@85?74@86?67>56:44F85E76B87@78>:;<:=<<>==????A@<DA:HB6JA2M@-P?+O?(CB0F?/K:2O62Q35Q28N5;F:<??=-=3)A1.J4/G-,?#5B&GP3Ô`S»J<§7)¢7'£:'ž9%ž;&£@)Ÿ;$£='¬?+¯?+²:)±6&³4%´2$Ÿ8'Ÿ8'Ÿ:(£>,§B0©D2©D0©B/¨?,«>*­<*µ=-¾C4ÅF7À>0·3&Í6+Ì8,Ì:-Ì=/Ï=.Ô</Ý90æ5/ï/,õ--ø.,ó0,ë4,à9)Ø=)Ó>(Þ9%Ô4Ï4 Î9%Å8&¾6&Æ@4ÕQEÒIAÜMIïUUüVXýJPø9Aü4?ÿ9DäCHßCFÓAAÆ?;¹=3®=/ª?/ª@0¿Q@ÉQCÑLCØC=å??÷@Eÿ>Gÿ8CúGMúENûEQþESüARú=Sü>XÿCbÿGiÿBhù<fô;gô=køDsûIyýK}ÿMyýNwóRtçTqÝQkáQlø[xÿdˆÿY…ÿ?lÿMxöX{ÍYp¿yƒ�ca„}sª��½§™ÑÅ¹Ú×ÎÛÝÚÙÜáÞÜéåÙíëÔîôÓðùÔóýÙóüßóøæòõìñóïðøõðøõð÷òïôîîðêêíäçèßäæÝâÖÐÔÍÉÊ»¹º¤¤¢��Š|�zt|qpzo~…sy€nv}k0./1/0320542653762873872:94;;3==5??5AA7CC9DD8EE9HH@HH>HH<JH9KJ6LK6MM5NM8KJ6KI<KJEQORWU`ZWhVTjQNiSI@ND;H?6F=6G>7H?8F=6C:5C<6A:4?74?74@85>95=84;63>3/=4/>42<74=98<;9=<:>=;@?;C@9G@6J@4L@0O@-P?+P>(=B,?A,E=0H92K63J46F35A57>=;8=69?5?A4C=-J9)^B4sRC¼K=¬;- 2#¡6&£:'�8$ž9%£?(¡;%¦=(­@,³@-¶=,·9*¸6(¹5(¦;+¤:*£9)¥;+¦?.©B/«B/«@.­?.«:(±<+¿E6ÆH9Á?1¼8+½7+Ï5+Ï7,Î:.Ï;/Ó=/×;/ß8/ç4/ð0-õ--÷-+ò/+ê4)ß8(Ö;'Ï=&á:'Ù7"×8%Ô=*Ì;*Á5&Ã;/ÍG<ÐG?ÙJFèPOóPQôGKò;@÷:Aÿ?GàDGÜDCÓB?Å>8·;1¬;-ª<-©>.µF5ÅM?ÓNEÜGCã?@ñ>Bý>Fÿ>H÷DJ÷CLúDPÿFTýBSú=Sü>XÿBaÿFhÿCiü?iù@lùBpûGvüJzþL|ÿIxÿHtõKpðRsò]zö`{ùXwýMqÿCkÿAlóCjÝJgÉ^p®pugNI†‚v´”‡Ì²¥äÔÇëäÜèéäéêîéçòíáõöâûýàüÿâýÿçþÿìÿÿòþÿ÷üþúûþûöýúõü÷ôúôôøïðôëîñèëïæëäÞâÜÖØÊÆÅ²²°ž ›Ž“Œˆ�…ˆ�…�–†‰�€†�}/.,0/-10.21/43/540762761:94::2<<4>>4@@6BB8CC9DD8IF=IG;JH;KJ8MJ7NL7NL7OL9KI:NKBTSQ_^dihxmm…lkŠihˆcYd[QZQGPJ@IH>FG>CC=A@:<A;;?:7<73<73=82>:1>:1=90:3-94.;60=82=:3>;4?<5?<3C?4F@4I?3L@2O?0P?-Q>-P>*3@&7?'<=+A;-B8/A62>42;31=85B:7H94O2.[+)o-.Š:= EJª9+¢2$Ÿ1"¤9'¥<)ž7$�8$¢<&¤;&¨=)±A-¶A/¹>.»<-¾:-À:.®>0¬<.©9+¨:+ª<+¬>-­>-¬=,²?-®9(¸>/ÊL=ÊH:¼6*º2&Å;0Ó5*Ô6+Ò8,Ô:.×;/Û9.â7/é2,ñ/-õ.+õ.+ñ0)ç2'Ý6&Ó8$Ì:#à7$Ü5#Û8'Û>-Ó=.Æ7)Å8.ËA7Ç<5Ì?8ÙEAåKIìIJëCCí?Að@CÜDC×C?ÏB;Â=4¶:.­9*ª;*«<+ª9)¿E8ÔNEÝIEâ?@ë<AùAIÿFPôAGô@IùCOýGTþEUû@Uü>Xÿ@_ÿDfÿCiþDmÿFpÿIwÿK{ÿL|ýK{ÿCvÿGwÿJtúNtþZ|ÿa€ýUvòCdüHkÿRvÞ=\ÎH`Úz†µ}~\F;„�r³‹Õ³§óÛÑúíåøóðøøú÷ôýôëüüêÿÿéÿÿëÿÿíÿÿòÿÿ÷ÿÿûÿÿýþÿþúÿýùÿûøÿøöþõöýòöûðôúïóðçêåßáÓÏÎ¾½¹­®¨¢¥œ�£™�£—¤ªœŸ¥—œ¢”/.,/.,0/-10,21-32.54/650872991;;3==3??5AA7BB8CC9IE<JF;KG;OI9PK8QL8QL8OL;LJ=SPK^]bmlzzz’��£€‚©~«|u–rkŒe^}YSoRMdMEZG@PB<HD?F@;?<87;62;7.<8-=9-<8,880991;;1><0?=1@<0?<-A;+F?/H?.K?/M@/O?/P?/Q>/P=.<@)=?*?>,?<-?;0=:3;:5:94<94D95N43[*-o&-�-8¨3C¶7H§7)¥7&§9(ª?-¨?, 9&Ÿ9#¤;&¥:&«<)³>,¹@/½>/Â<0Å=/Ç=0¹@5¶=2²:,®8*¯9+°:,²:,²:*¶;,¹;-ÄB4ËE9Ç?3¾1'À2(Ê:1Ú3+Ø4*Ù7,Ú8-Ü8.ß7,æ3,ì1,ó0,õ.+õ.)ï0(æ1&Ú4$Ñ6 Ê8Ü/Ú0Ú4$Ý;,Ø</Ð9.Ï<2ÒC;Ã6/Ä70Ê;5ÖE@âMIåLGÞC?Ù;8ÑA9Ï@8Ç>4¾</µ:+°8*®:+°<-¬4&½?3ÏHBÙHEßABæ@DôELÿLUð?Eð?GöBKþHUþHWüBWû?Wý@\ÿBbÿCfÿFmÿIsÿMyÿO|ÿL{þJyÿ@tÿL~ÿQ}ÿJrúLoÿUwÿUuùLjòEcïKfÒ>Vßetû §Í‘�]=2aP@©wlÑ¥œöÔËþêãÿôòÿþÿÿüÿùóÿüïÿÿïÿÿðÿÿòÿÿôÿÿ÷þÿûýÿüûÿýùÿüøÿúøÿù÷ÿö÷ÿôøÿôøþó÷öëïìãäÚÔÔÉÅÂº¹´³´¬±´©²µª¶¾³°¸­¬´©10,10,0/+0/+10,21,43.54/77/880991;;1==3??5AA7BB8KD:LF:OG:QJ:RK9SL9RM:QK=OKBVTUfdowx�††¨��»�“ÃŽ‘Æ�ŠÀ‡‚¸{w©rlœid�_[~UPnNJaJGXEBM?=B;7696196-86*86)581692891;;/><-?<+C<)D<'I>*J?+L?,M@/M@0M?2M?4L>3M?4K?3F<2B90=909:25<44>57<5>:1H3.\0/{48œ;D¯9E²2Aª<+ª<+«@.¬A/©@-¥<'¥<'©>*§8%­:'µ<+¼=.Á;/Å;.Ê<0Ì<1ÁA6¾>3º:/·7,·7,¸8+¸8+º8+»7+ÇA5ÍC8Å8.Á1&Æ3)Ë7-Í6-à2+ß3)á5+â6,ã5,ç4-ê2*ð/*ö/,ø.*ô/)ì0'ã1#Ù4!Î6É7Ú/Ù/Ù2"Ù5)Ù9-Ô:0Ö?6ØE=ÕF>Í@9Ç<5Ë@9ÖKDÙNGÐF<Å;1Å=1Ä<0À</º;,·9*´:+µ=-¹?2µ9-½=4É@:ÒC?ÛBDãDHîIOöOVí>Cí>EóBJûJTÿJYýFXúCYýB]ù@_ûBdþFjÿJsÿOxÿOzÿLyýIxÿGwÿR�ÿQ}ÿIqûImÿStÿVtøNiëD^äF]èYkÿ—¢ÿ¶¼î žˆKFd2)©jcÍ–�ôÇÁÿãÞÿòðÿüýÿýÿú÷ÿý÷ÿÿöÿÿöÿÿøÿÿùÿÿüÿÿýýÿýúÿüøÿûøÿúøÿø÷ÿ÷øÿõ÷ÿôøÿôøýñóóéêäÜÚÖÑÍÍÊÃÉÉ¿ÉË¾ËÍÀÇÑÈ¾È¿·Á¸84163.52-30+30+41,52-63,85.96/:70<90>;2@=4B?6B?6KC8ME:PF:SJ9TK:UL;SL<RL@QLHZW^kj|~�Œ�º–™Î˜žÚ™žÞ™˜Þ“’Ö‹ŠÌ†„Ã~·xv¨ml–fe‡]ZwVTiMKXDAH><=;:6;8396/267465672880<:-A<)D>(G?(I?&J?)IA,JA0IA4IA6HA9G@:R9<N8;I68A57:65384.93+;12?517+=3'X:0{D=•GCž>?ž46§<*¨=+ª?-ª?-©>,©>*¬?+¯@-«8%²9(¹:+¿:+Ã9,É9.Î:0Ò;2É>7Æ;4Ã81Â8.Â8.Ã9/Â8.Ã6,Ä7-ÑC9Ò?5Ä0&Ã,#Ð7/Ö<4Î4,æ1*æ1*ç2)è3*ê3+í2+ð/*ó.(ø.*÷-)ò/)ì2&ã3$Ø5"Ï7 Ì7Ü5#Ù3#Ø2$Ö2&Õ5)Õ7,Õ;3Ö?8ìYRáRJÓHAÊD;ÉF<ÊJ?ÅG;½?3¼;(¼;(º;*¹:)·:(¸:+¼>0¿A3ÁA6Á<5Å<6ÏA?×EEÝGIãJMèMQëADì?EðCIúJTþN[üJZüF\üF]øA]ùBaýEiÿJpÿNwÿOzÿMxÿKxÿR{ÿR{þOvýOtÿVwÿ]{ÿSoîD^øUjîQd÷dtÿ’žÿ‹“òƒ‰Ç`c­KL²keÏŽˆñ¼¶ÿÞÙÿðìÿúúÿüþýûÿüûÿþûÿÿûÿÿûÿÿüÿÿûýÿûûÿûøÿûøÿüùÿûùÿûúÿøúÿöøÿòõÿðóûìïòææçÝÛßØÒÛ×ÎÝÛÏàÞÑàáÓÚãÞÏØÓÅÎÉ<94;8385052-41*41*52+63,74-85.96/;8/=:1?<3A>5B?6KA7MC7RF8UI9WK;WK;UL=SJASJK[Xcnl‚‚‚¨‘”Çš Þž§ì¡©ò¡¤óž í™›æ•˜ß”•Ö��Ìˆ‰¿‚ƒ±zz rq‘fd|XWiPN\IGRFCJDBG=?K==G;:?;:8<92A;-D=*F@*F@(GA)GB.ED2CC7BC=AC@>BAG9HH<JG?LGDODGN@JL;II:ID?KA<@2F=.bH9QB‰K<Œ@2Ž;-¨=+©>,©>,ª?+­@,¯@-°?-°=*±8'¶8)½9*Ã9,È8-Ì8.Ò91Õ;3Î;4Í:3Ë81Ë81Ì92Í:2Ì70Ë6/Ó<3Õ>5Ò91Ì2*Ð3*Ù;2Ú<3Ó5,è0(é1)ì1*î1+ñ0+ò/)ô-(ö,(÷-)õ.)ñ0)ê2(â5%Ù6#Ò7!Í8 Õ8%Õ8%Õ5%Ñ4%Ò4(Ô6+Ô7.Ð7/ãNGèXPçZQØRIËH>ÃE9¼B5·?1¹<&¹<&¹<(¸;'¸9(º;*À>0Ä@4ÉD;Æ?9É@:ÑFCÕIHÖHG×IHÛJMìCFêADíDIöKSüQZýN]ûL]üJ`öD^÷DaùFfýIlÿNuÿOxÿOxÿNyðYzðWvóVuüYxÿ]{ÿZuûQkòI`ýWköUgêN\ö^kâKZçSaçSaåQ_¸jfÉ‚~çª§ÿÓÑÿëèÿôòÿøùÿÿÿùýÿùüÿûüÿüüþüúûýùøüøõü÷ôÿú÷ÿûøÿüúÿûúÿøøÿòõýîñúëîðââëÝÝäÙÕâÙÒæßÕëçÛñîßóñâêóðÜåâÏØÕ@=6=:3:7074-52+52+52+63,74-74-96/;8/=:1?<3@=4A>5M@7OC7RF8WJ:XK:YL<WK=TICSJM^Xfpmˆ‚„­‘–Íœ£ç£¬ù¥°ÿª±ÿ¦«ü¡§õž¤îŸ£ê� ã™›Ø•–Î’’Ä‰ˆ´yyŸji‹`]|XUpSOhPLcMJeKG^FBS@=H?;<?:4B<0A>-C@-CB.BC3AE7>E=<EB;EF9DF:D]@JcHTjR]oXdt\fp]dj`ac`[W]LDgI>€UE’YF�L7�A+“A+«@,®A-®A-®A-°A.²A/²=+°7&µ7(¼8)Â8+È8-Í6-Ñ7/Õ8/Ù;2Ò73Ñ61Ñ61Ò72Ô94Ô94Õ81Ó6/ÞA:Ö8/Ñ3*Ø7/Þ=5Þ=5Û8/Ù6-ë0'ì0'ï0(ò/)õ.)ø-)ø+(ø+(ø-)ô/)ð1)é4)á5'Ù8&Ó8$Ï8#Í8$Î9%Î7$Ï6&Ð7)Ô8,Ó7+Î4*Ì3+ãNGôd\ë`YÔOFÂB9¸<2´:/·?&¸>&·=&¸;%º9&½9*Á;/Ä>3ÌC9ÊA9ÎE?ÕKHÓLIÎGDÌFEÐJIéFGæCDéDHòMSùRZùR\ùN^úOaõG^õGbøGdûIiÿNrÿRvÿRyÿRyå[uë\xõ`}ü_|øUpõMgùPgÿYnÿ[mÿbsóL]úSdøM_ÿRgüI_ýE]³d`¾tqÚš˜ûÈÅÿåãÿîëÿõôÿÿÿûÿÿùÿÿùÿÿúÿÿüþýýüúýùöýøõÿøõÿùöÿúøÿúùÿööþððøêêõåæìÜÝèÚÙæØÕèÞÕðèÝùóåþûêÿþíòûúâëêÔÝÜA>5@=4?<3=:1;8/96-74+63*52)52)63*74-:70=:3@=6B?8J@6OC7RF8VI9WJ9XK;ZL?[NHTIMXR`gd�|}©�’Ì—Ÿçž©ù¤°ÿª³ÿª³ÿ¬³ÿ«³þª±ùª®õ¨«î§«êŸ¡Ü™šÒ��Á�±ur¡he’]Z…XR~YP{YQxVOpOG_E?M?:@?;8@@6>>2@B5@F:>E=:C>9CB<GI?MP:YvKh†[u�du�nx‘|z�q‚|`n†]e�X[œXU¥WM¥M?�A,š:"Ÿ;#©<(«>*®?,±@.³@.´?-¶=,¹;,º6'¿5(Ä6*Ë7-Ñ7-Ö8/Ú91Û81×84Ø95Ù:6Ú85Ø61Ø61Û83Ý:3æC<à=6Ú70ã@7þ[Rÿlcÿ]Tã@7é1'î2)ò1*ô/)õ*&÷'%ø(&ú*(ø-)ó0*í2)ã1%Ú0#Ó1"Ò5$Õ:(É=&É=&Ë=)Ï<*Ñ;,Ò9+Ô8,Ó6-Ú@8Ð71ÜGAôc^ãXQÉB<Å@9·3.´<#¶<$¹<&º<&½:(¿:)Ä<.Ç=2È>4ÌC;ÙPJßXTÓOJÁ@;¿@:ÊKEäFEäFEèJKïPTòQWïNVïKVñL\ùRdøOf÷Ke÷JfüMnÿRsÿRvÿPtê[wêZuðZuú[wÿ]xÿZsÿWnÿViÿctþVgÿ\mÿYlõDXùBXÿMeÿIb·nh­hcËŽ‹èµ²ùÑÏÿêéýïîúù÷øþüøÿÿøÿÿøÿþúþýþþüÿûøþöôþùõÿû÷ÿùöÿöôÿööÿõõöèèç×ØäÔÔÞÐÍãÖÐñçÝüôçÿøèÿüéÿÿí÷ÿÿèñðØáàC?4B>3A=2?;0=90;7.:6-95,73*73*73*83-:5/=82@;5B=7I?5LB6QE7UH8VI8YI9YK>ZMEUKLXP_ebyz¦‰�É”œäš§ö ¯ÿ«´ÿ¬µÿ­·ÿ¯·ÿ¯·ÿ¯¶ü¯³ú¯²÷§ªí¢£ä˜˜ØŒŠÉ€~½uq®ie¢b^›cVŽbU‹]TƒWOtNHdFCTBAIAAA;=8@C<DG@BD??A@BCGMNSWW_Vl“gyŸw�¥€€¢Ž œ}œ£qŒ¥_w¯XkºTa¾OU¼FD¶=4±9(±:$°<#§8%¨7%©8&­:(°8'²9(µ7(¹5&»3%Â4(Ë7-Ó;0Ù<3Þ=5à;5à;5á>9ß<7ß<7â=9æA=èC=éB<èA;ç@:èA9ä@7Ü8/Õ1'Ø6+ëI>þ\Qô?4î6,ê+#î)#ù,)ÿ./þ,-ø((ú0.õ4/ï7/ç6,Ü4)Ö2&Ó3%Ò5&Å='Ç<'É<(Ì;(Í:(Ï7)Ï6(Ð4(Õ8/Ï5-Õ<6åPJçSOÛLHÏA?º/,¹=%º>&»='½<'¾9(À8(Ã9,Ä:/È>4ËB:ÕOFÜWPÒQKÃD=¿B<ÆKDáIFáIFåMLëSRíTVëPVéNVìOZ÷VføUhùSiúRküRmÿSqÿStÿRsïNoøTvÿ\|ÿ^{ÿ[vÿUoýQgûReüUføQbÿZhÿZjôM^úRcÿWiôI\§ha™\W·€{Ù©¥ïÇÅýáÞùêçýøõøýùøÿÿ÷ÿÿöÿýùÿýÿÿýÿûûÿö÷üùòþùõþùõþöóÿ÷õÿõõøêéêÜÛäÖÓÝÐÊáÔÌïåÙüõåÿùçÿýéÿÿì÷ÿýèñîÙâßEA5EA6C?4A=2?;0=9.<8-;7.84+84+73*83-:5/=82?:4A<6G>5JB7ND8RF6TG6WG7YI:YKBWKKXP[b^wsuž…ŠÂ�™Þ—¤ó�¬ÿª´û¬¶ý®¸ÿ±¹ÿ²ºÿ´»ÿ³ºÿµ¹ÿ¯²ùª­ô££ë™—àŽŒÕ‚€Éxt¾qm·l`¢i]�dY“^V‡VQyNKhEDV@@J76;?=>HBBKABN?BYFJmX_}fn�t¤�}¬§‚®¬}§´w ¾p—Âc…ÃRpÅE^ÔI\×EPÊ9<¾3,»7(¸;%³; ¯<*¯<*°;)³;*·<,»<-À<-Ä<.Ä6*Ë8.Ô<1Û>5á@8á>7à<3á:2Ü73Ù40Ø3/à93èA;ìE?êA<å<5ã<4Û4,Ø4*Û7-Ô2'Ì, Ö6*èH<÷I>ò@6ï4-ð-)÷+*ý+,ý+,ø*,ñ))ì/+è3,â5.Ü4+Ö2(Ô2'Ô2'Ç:&È;'Ê<(Î;)Ñ;*Ò:,Ô8+Ô8,Ñ4+Ø;4Õ:5Õ<7çONîXYÙEEÅ02¾=(¿<(¿<(¿:'Á9)À8*Á7*Á7,Æ>2ÇA6ÏJAØUKÑRIÄH>¿E:ÃH@ÚIDÙHCÝLGäSPåSSâPQâMQåNWòXdöZhý[pþZrýUoûQlýPnÿRpÿFmÿOvÿZ}ÿ[{ÿVqÿSkÿVkÿ[mûYhúYhü`mö`kî\fñenífmÚT[’cY}ND™lfÃ˜’ß¹¶ñÓÑôàßþöôøú÷÷ÿý÷ÿÿöÿýùÿýÿþÿÿýÿÿ÷ûúúòüùôüùôýøôÿùöÿøöùîìñãâçÙÖÝÐÈÜÒÈîäØýöäÿûèÿýçÿÿè÷ýùêðìÝãßIE9HD8FB6D@4B>2@<1?;0>:/:6-95,95,94.:5/<71>93@;5E>6HA7LD7QE5RE4UF3WG7WI<XMIXNW_Zppp–€†ºŒ•Ö”¢íšªø¨°ø©±ù¬´ü¯·ÿ±¸ÿ²¹ÿ´¸ÿ´¸ÿ®²ü«­ø¥§ôŸžì—–äŒ‹Ù‚�Ï{zÈxl´pf«h_ _Z’YW†QQwGGc@?Q<6DF9BS>C_@EmDJ€OU•]f¦jrÇe˜ÍkœÏl›Ïf‘Í]…ÎTyÌFgË8UÌ0Hß>PäBMÔ:<Æ7/Ã@.ºB*®<!­5$­5$®5$±6&¶7(¼8)Ã;-È</Ó@6×@5Ú@6Ý?6ß<5Þ:1Ý6.Û4,Ò/(Ò-'Ó.(Ú3-á:4ä;4á81Ý4-Ü5,Ò+"Í)Ù7,âB4Ü?0Ð4%Ê.éF7óI<ýH?ü<9ö,,ó"%÷&)û/2ñ-.ë/-ä2.Þ3,Ù2*×0(Ö/'Ö/)Ð8*Ò9+Ô;-Ö=-Ú>/Û?0Ü@3Ü@3Ò6*èKBåJEÎ50àFFóZ\áHKØ?BÆ=-Ä;+Ã:*Ã:*Ã:*Ã9,Á9+À8,Â<0Â>2ÈF9ÏOBÎPDÄH<¿C7¾D7ÑF?ÑF?ÕJCÛPKÝROÙMLÚKMÜKPëX`ó[hüaqÿauûWoõOgõMgúPkÿJuÿOyÿSwÿRqÿSmþ[pÿcuÿixÿguüaoôbmìelàglÔjjÉjh¼c_�dVeH:_Tª‡�Í«©åÇÇïÚÙÿóóùøöøþü÷ÿÿ÷ÿÿûÿÿÿþÿÿüÿÿ÷þûüôúûóûúõþûöÿýùÿûøþôòøíéêßÙÞÔËÝÓÇíæÖÿøåÿþèÿÿæÿÿçõúóêïèáæßLI:KH9JG8HD8FB6D@4B>3A=2=9.<8/;7.;60;60<71>93?:4B?8EA8JD8NE4PE1TE0VG4XH9ZMEVMR[Whkl‹~‚²‰“Ð’Ÿå™§ò§­÷©¯ù«±û­³ý°´þ°´þ°´þ¯³ý«®û¨«ø¥§ô ¢ïšœé“•âŠŒÙ„†Ó…É{u½mj­dd _a”X[†QQsNHbUFY_CRlBL�EO˜LV¬U]¼[dÅ]fçJuéNxæPuàLn×FcÒ?YÍ5JÊ+?Ú5EçAMéFKÙ><Í>6ÊH8¿J6°B)·>-¸=-º<-½>/Ã?2ÊB4ÐD7ÕE:ÙE9ÚB7Û>5Û:2Ù6-Ù5,Ú3+Ù2*Ô1*×4-Û60Ý90ß80Þ7/Ý6.Ü5,Ö/&Ù5+Ø6)Ï2#Í1"Ò9)Õ>-Ó<+Ö=-æD7÷KAÿD?û56÷)-÷)-ù.2ø67í55â30Ú1,×/,×/,Ù0-Û/-ã80â:1â:1â<0à<0ß=0Ü?0Ú>1Ñ7+ïWLù`XÓ;6Ó;:èOQÞEHèOTÍ=2Ê:/Æ8,Æ8,Æ:-Å;.Ã;-À:.¾:-¾<.ÁB3ÇH9ÇI:ÂD6¾@2¼>0ÊE<ÊE<ÎI@ÕPI×RMÔNKÓKK×LOçZ`ð^hüfrÿhxü]qóOgóMeùQjÿPzÿQxÿQpûSmø\qûhxûjw÷epüfró_kí_kêkrÝsu¿lh¦f\¡l^ujXVI8kXJ–{t¾ŸœßÁÁïÕØþîïûõõúüûúÿÿùÿÿýþÿÿýÿÿûÿÿ÷ÿýÿ÷ûþõûüöÿþùÿÿúÿþúÿûõÿ÷òñèáäÜÑáÙÌðé×ÿúæÿÿæÿÿãÿÿäöùðíðççêáQK=PJ<OI;MG9KE9IC7GA5G@6B;1A:2@91?82?82?82A:4B:7@?:EB;IE9MF6PE1RF0UF1WG7YLCUKLZTbii…|�«‰’É“žÞ—¦ë¨«ú©¬û«®ý­°ý®±þ®±þ­°ý­°ý©­÷§«õ¤¨ò¢¦ðŸ£íšžè•™â‘•Þ’’Ú‰‰Ï|€Àrx´nu«lpŸhhŽj_x`x‚Wj�O_¥OZ½R\ÑR[ÚOVÛHPñ:Pî=QéAPàCLØCIÑ?BË9:Ê45åIJèHHã@AÕ76Î93ÌB8ÅE8º@1ÃE6ÃE6ÅF7ÉE8ÌG8ÑG:ÖH<ÛG;Ö>3Õ;1Ö8/Õ4*Ö3*Ø4+Û4,Ü5-Ú9/Ý<2à=4ß<3Ý90Ü5-Ü5,Ý6-Ò.$Ý;.Ü<.Í1"Å.Í8$Ð=)Ì;&Ë:'Ò9+á:1ó=9ÿ@@ÿ;?ÿ27ô+1ê,.ß+,×+)Ó+(×/.Þ44ä88è:;ó55ò64î73é6/ã7-Ý5*×5(Ñ5&Í5'çPEÿmcÛHAÈ42×CCÓ>BêUYÙB;Ô=6Ì70Æ6-Ç9/Æ<1Ã=1Á=.»9)»<+½@.¿B0¿B0¾?.¼=,»<+ÃC8ÄD9ÈH=ÏPGÒSLÐOIÐOJÔOPç_cîaiûitÿm|ÿdu÷UjõRgýWoÿSxÿUtûWpð_pñoyôy~êmsÞXaïamò`mïaoðs{ìˆŠÉ‚|¥wjšyhhpYMO:^WGƒqg±•’Ý¿¿ñÔØýéëþôõýûþûÿÿúþÿýþÿÿýÿÿûÿÿöÿüÿøùÿõúýôÿÿúÿÿúÿÿúÿý÷ÿþöùðçíåÚéâÒôïÜÿûåÿþåÿÿãÿÿâøúíòôçîðãSM=RL<QK=OI;MG9KE9JD8IB8E>4D=5B;3A:4@93A:4A96B:7@A;CC;IE:NG7QF2RF.UF/WH5XJ=RHFXR\jh€}�§‹’Æ’žÚ–¤å¥¦ù¦§ú©ªý«¬þ¬­ÿ­®þ¬­ý«®û¨¬ö¦ªó¤¨ñ£§î¡¨î §ë�¤è›¢æ™žâ’šÛŠ”Ò…�Ê‚ŽÂ‚‰·‚�©‡yšŽmˆšczªWi¾P]ÓKWäGPí?Hñ9Aî;6é<5âB6ÙH7ÎJ5ÅG1ÂD.Å@/ãUGàG?Ú;7Ø64Ø88Ö:;Ï98Ê66¼=.¾<.¿;.À;,Â8+Ä6*Æ3)È1&Í5*Ð3*Ñ3(Õ2)×3*Ù5,Ý6.Þ7/Ü>3Ý<2Ü;1Û8/Û7.Ú6,Ø4*×3)Õ3&Ó3%Ñ4%Ï6&Ò=)Ñ>*Ê9$À2Æ;(È5%Ó3'ç60ü;<ÿ=@ÿ7=ù27ê-1à..×--Õ0.Ü44ã9:é;=ë;>ý.4ú/3ö01î1/æ1*Þ2(Õ1%Ï3$È2#Ð>/új_ãTLÈ95Ð@@Ë:=ãRUçJEÝB=Ò93Ê5.Æ8.Å;0Â<0¿=-¹<*¼?-½@.¼?-º;(º;(½<)¾=*º>2º>2ÀD8ÈLBÌPFÊNFÌMGÐNLçbcêbføhqÿo{ÿhxøYm÷Ujþ[pÿXsü\tìbqãktç€í‰‡ãyyØ_dñhrÿl|öcsíkwø‘•é¤ŸÀ–Š¥‹z\pWFR<UVFtg^¤ŒˆÜ¾ÀóÔÙùâèÿóøÿúþýþÿüýÿýüÿÿüÿÿúÿÿôÿûÿøøÿõ÷ýóýÿùÿÿúÿýöÿý÷ÿÿöÿùïõïãòìÜúõáÿþçÿþâþÿàÿÿãýþðùúì÷øêUO?TN>RL<PJ<NH:LF:KE9JC9G@6F?7D=5B;5A:4A:4B:7C;8@A<DD<IG;MG7OG2RF.VG0WH3VH;RGCWRYjh~~‚§Œ”Å’žØ–¤ã¡ž÷£ ÷¦£ú©§û©ªýª«ýª«ûª¬ù§«õ¥©ò£§î §ë¢ªë£«ì¢ªë¡©è˜¡ä–¡á”ŸÝ“ŸÙ��Ñ�˜Ç’‘¹™Š«‘m‰£c{´WjÇM\ÚBNë;Eø6>ÿ4:èB*âD)ÙH)ÎN+ÃO(¹L%¶H%»D&ÛWBÚF8Ú;5æ>>íBHé>Fß5>×08ÈF8ÇE7ÈD7ÉA3Ç=0Æ8,Æ3)Ç0%Ê0&Î1(Ó2(Ö3*Ù5,Ù5,Û4,Û4,áC8Û=2Ø7-Ø7-Ü:/Ý9/Ù5+Õ1'Ù7*Ð0"Ì0!Ð9&Ì9%Æ5 Ç9#ÑE.Á:&É:)Õ7+â3.í//÷05þ5;ÿ;BÿIMúGJîDDæ@@ä>>ã9:ã28á.4þ'/û(/ø*.ó-.ë0+ã2*Û5)Ô7(Æ0!¾/óeYê]TÌA<ÓEDÊ;=ÝNRïPMäFCÕ:6Ê5/Æ8.Ä:/À</»<+»>,¼A/½B0º=)·8%º9&¾;)Á>,²8+²8+¸>1ÁG<ÅK@ÄIAÆICÊJGå`aæ^bñdlÿlxÿix÷ZköTiýZoú^tòcuãgqØqrÝ…�é”�ê‹‡åruùq{ÿxˆõ`sßXgóŠ‘ý¶´Ö«¢¬•…TnSAS;PTCkaWž†‚Ý¿ÁõÖÛøßåÿóùÿûÿÿþÿüýÿýüÿÿüÿÿúÿÿôÿùÿø÷ÿôöüòüÿøýþøüüôÿýöÿÿöÿþôûõç÷ñáüúåÿþåþýáýþßÿÿãÿÿñýþîüýíXO@XO@WN?VM>TK<SJ;RI:QH9MD5LC4KB3I@1H?0H?0H?0H?0FC<GE9JG8NI6RJ5UJ4UJ4VK9XNDULMXTbii…{~©‰ŽÆ‘™Ú— å¦¢ù¦¡û¢¡þ¡¡ÿŸ£ÿŸ¨ÿ «ÿ¡­ÿŸ«÷ ªï¡©ê§¨ë«¨ï²§õµ¦ù¶¤ú—«ÿ“¨ùŒ£ç�£Ö¢¦Ë´ ¹½„“ÆbnÑEPé:Gõ5Bø4>ñ8>æ=@ÙD@ÑHBå;Dà;BÞCGÉ99ÌB@ËD@½/-ÞHIëHKîAGï;Dì8Aé:?â<>Ú<;Ô<9ÏA=É>9ÊC=ÑLCËK@¼>2³7+¹;-¹9,¾8-Å7-Ê3,Ï0,Ô/-Ý11á34çA1à9)Ü1 á1"é8(ê;*ã6%×2Ñ2Ì4Ê5Ç4 É3"Ì3%Ñ3(Ô3)Í.(Ï2+Î6+Ì8*Ë8(Í7&Ð7%Ø6'ß3'é2,ð31ò01ð+2í*2í+4ï-6ú+1÷*/ñ+,î.-ë4.ä8,Ú7(Ð5#Ã.Ä3 çXHèZLÊ<2ÞOGÄ5/ÚIFÝQRÚLKÒDBË<8È80Ç7,È9+Ê;+È;)Å:'À9%½:&»<)º=+¸=+¶=,³9.µ;.¹=1½?1½?1¿@1Â@2ÅA4ïk_õqeêd[ômiùroécbðjiútuÿk|ûivñdmï_hòaføgjõnkîqk÷|wÿ}ƒþYjÿ[wîZpû¬±«°œaŸz]sMIZ6LR6snX£–†Ë·®íÕÓÿîðÿõ÷ÿ÷ûþøüüüþþÿÿþÿÿþÿÿýþÿæÿòàÿëâýêìÿð÷ÿôûÿôþÿóÿþñÿýïÿûîÿùèÿùæÿøãÿùãÿùáþúáýÿþþÿÿþÿÿYPAXO@XO@VM>UL=TK<SJ;RI:NE6MD5LC4KB3JA2JA2JA2JA2FC<GE9JG8OH6RJ5UJ4VK5VK9XNDUMKYUciiƒ{}¦†‹Â�•Ô“œß œðŸ�ñžžöžŸû�¢þŸ¦ÿ ªÿ¡¬ü ¬ô «íŸ§æ¢¦æ¦£èª¢í« ïª�ï™ªü—§ô˜£åžžÒ¬šÂº�ª½r†ÃUbÓCMå;Dð7?ñ6=í8=ã=?ÛAAÕDAä:CÜ8?Û@DË;;ÊC@ÈA=¿41åOPäDFé>Dë:Bè7?ä7;Ü89Õ:8Ð;7ÓF?Ç<5Å<4ÌG>ÌLAÁC7¶;,·9+¹7*½7+Å7-Ë4-Ñ2.Ø3/á53æ66á?0ß<-Þ6)à4&á6%á6%Û4"Ó4Ð:"Ê:"Æ:#Æ;&É<*Í;,Ì8,Ì5*Ö3.Ö5-Ñ7-Î8*É6&Ç4"Ë4!Ð3"Ø2$ß1(å/+ç.,è,-æ,1æ-3ç.4î*,î,-í0.é2.á3*Û5'×7'Ò9'Ó@,»*ÔE5Î?1ÙF>êWPØC?ØBAåWVâRRÛKJÔC>Í=5É9.È9+Ç8(È;)Ä;(Á:'¾;'½>+º?-¹@/¶>-²9.µ;0·=0¹=1º?0½?1ÁB3ÅC6ëi\òmdçb[ðkfõolèbañklûuvÿp€ÿo|öirë^fêY^òadøqnù|vöyuÿx~ùRdÿUríXnö¥«¥¨“X”n[tLN_;QZ;us\ª��×ÃºøàÜÿôóÿúûÿúûÿûüüüþúþÿûÿÿúþÿûüþçÿñáÿêáýçéÿìóÿòøÿóýÿòÿÿóÿýïÿýíÿúëÿöåûóàúòÝûõßý÷ßúúøüüúÿÿýZQBYPAYPAWN?VM>UL=TK<TK<QH9PG8OF7MD5MD5MD5MD5MD5GD;JF;MG9PI7SK6VK5VK5VK9WMCVNL\Vbki�y{¢…ˆ»‹‘Í�—Ø™—à™˜ä˜™éšœï›Ÿö�£ùŸ§ø ©ö ªïž§èœ¤âœ¢àžŸàž�áŸ™ãž—ä��ã–›Ý –Ò®�Â¼ƒ®Ær“ÇZqÇCQ×AJá>Cæ<?è;=æ<?ã=Aá>Cß>Câ;CØ7=Õ?AÏA@ÉD?Â=8Ã96ëWWàBCæ=Bé:Aæ7<Þ58Ö66Ñ96Ì;6ÕHAÅ:3¾5+ÅA5ËK>ÆH:»=/¶8)¹7)¿7+Æ8,Î7.Õ60Þ63æ87ë;;Ó5)Ö6*Ú6*Ü6*Ý5(Ý7)Ú:*Ö?,Ã5¼5¸6 ¸7"»9)¼8+¼4(º0&é=;å>8Þ=5Ô</Ì9)Æ8$È7"Ì7#Ò7%Ö2&Ù.&Ú-'Ü-*Ü.-Û//Û//Þ*)á/+á4.Ý5,Õ3&Ð5#Ð9&Ñ>*ÓB/Â1 æTEÐ<0ÚA;ÞC?èJIòTSèVVçSSãOMÝIEÖC;Ï<2Ê8+Å6&Ä7&À7%¼7$»:'¹<*·>-µ=,²=,°:.±;/²<.µ=/·=.º?0ÀB4ÃE7Ü\Oêg]äaYñlgöpoçabìfgòkoäP`ï^kôhqòemñ`eödgûqqúzwövsÿnuõJ]ÿMjïUmñœ¡ŸžŠPˆcVoEOd=Va?ww]¯¤’âÐÄÿíæÿ÷óÿûøÿýûÿþüûÿüûÿýûÿýùÿû÷ýùãÿëÜþãÚøÞàúáèûåïüèöýëýþîýúëÿúêÿ÷èúñàòê×ðèÕôìÙùñÜýùöÿûøÿþû\PB\PB[OAZN@YM?YM?XL>XL>UI;TH:SG9RF8RF8RF8RF8RF8JF=KG<OI;RK9TL7WL6WL6WL:VL@UMJ\V`jh~yy�‚„´ˆ�ÄŽ”Ð””Ò”•Õ••Û–˜ã˜›ê˜žìš¢í›£ëœ¥æ˜¢ß–ŸØ“œÕ“™Õ“—×’“Ö��Ö�†½Ž„¹£~²¸r¤Êe‘ÖTzÙDa×:Kà@HÞBCÞC?ÞC?áAAä?Cè=Fë;Fã?FÖ:>Ó>@ÐFCÅA<¸71Å>:ê[WÝABä?Cç=@ã:=Û89Ó97Î=8ÌA:ÏE;Ã9/»2(À</ÇE7ÄE6½>/¸9(¼8)Â8+É:,Ò:/Ù80á83è;7ì=:Ô3+Ö3,Ù5,Ý4-Þ6-Þ7.Ú:.Ô>/Æ9(Á<)½>-¹>.»=/½=2Á>6Ã>7ó?>î?<æ?7Ù=1Í:*Æ9%Æ;$È<%Ï<(Ï8'Ï2#Ñ1%Ó2(Õ4,Ñ2,Ï0*Ñ3*Ó5*Ñ7+Ï7)Ê7'É8%Ê<(Ì>*Ê<(Î=,ô^PàF<Ò3/Ò.-è?BþUXÿvuÿroÿjgö^YçPIÕA7Ç5(½.Ä8'À9&»8&¹:)¶=,µ=-±>,°<-­<.­<.®=/°<-±;-¶>0¼B3ÁE9ÉMAß`Wâa[ôpløtrå`aä]aå^dÙFVçYeógpôgo÷dlýjpÿstúxvõssûenóCXÿEbðRkë’˜œ—ƒN‚\Ql?Ri?ZhDy|_°ª”èÛËÿôêÿùðÿúóÿýöýÿùûÿúùÿúöÿøòüóîøïÔüÚÎóÒÊëÌÏìÎ×îÒàïØéòÝóöãöõãûõåüõãõìÛíáÑéÝÍíáÑóç×úõïü÷ñþùó\PB\PB[OA[OAZN@YM?YM?YM?WK=VJ<UI;UI;TH:UI;UI;UI;LH=OI=QI<TK:WL8XM7YM7XM;UK?UKI\U]hexut“|~§„ˆ¸Œ�ÄŽ�ÁŽ‘Æ�’Í’“Ô’•Ü“—à”˜á•šÞ•�Ü’›ÔŒ•Ì‡‘ÆƒŒÃ�‡Ã}‚ÂzÁ|vš‹q–¦h‘Ä[†ÚKvè>cî7Uí8IçAEßFAØIAØIAÞFCæAGð;Jõ9JãDI×>AÐ@?ÏJE¾?8²3,ÇD<âTPÜDCáACä>@â>?Ü>=Ô@<ÏE;ÌH<Ç=2Á7,½5'½9*¿=-¿=-»<+½<)À;*Ç;,Î<-Õ;/Û8/à70ç83ë95ã:7â64â22å31æ42ä50Û2+Ò1)É2'Ç9-Ä<0¿90¼5/¿52È<;ÒDCó57î66å61Ø5,Ë5&Ã6"Á9#Ã;#É>'Ê9&Ë5$Í5'Ñ9,Ó;0Ò:/Ï8-Í?1É;-Ä8'Ã7&Ã:'Å<)Å='Æ;&Í>-Í:*Ø>2ãB:Ö.+æ::á14å26Ò73Ö;7ÞC>åJEêQIêSHèTHäUGË?0Æ>.¾<,º<-¶>.³@.°?/®?.«=0«=.¬<.¬<.­<,±=.·A3¼D6ÆLAÞbZâc]ðnlôrrå`cå`eæ`gúixûozõltí`hñ^fÿkqÿw{ÿ{|öpqø^hö@Wý>]óOhæ‡� •ƒX†aXuE\vIgwP‚ˆfµ±–éáÌÿùéÿüíÿýñþÿóûÿôøÿöôÿóíûìäòãÝëÜÁëÅ»ã¾ºÞº¿Þ¼ÆáÀÍâÃØæÌãëÓìîÙôñÞøñßóêÛìàÒèÚÍìÜÏñáÔòçáòçáóèâ[OA[OA[OAZN@ZN@YM?YM?YM?XL>XL>WK=VJ<VJ<WK=WK=XL>PI?QI>SK>UL;XM9YM7YM7XM;WK=ULGYSWc_nmkƒtt–|~§ƒ†³†‰²‡Š·ŠŒ¿‹�È�ŽÏŽŽÔ��Õ��Ó�”Ó‹�Ê‚‰¿{‚¶u|²ov­gp«ck©€n~�ey­ZvÏMoê?cú2Vÿ0Lû6Gð@CâGBÙLB×MCÝIGèCJõ<Nü8NàFH×CCÌA>ÍID¸<4¯5*ÉI@ÕLF×CAÜ>=Ý:;Û;;Ù?=ÔE=ÌH<ÇI;Á7*Á7*À8(¾9(¼9'º9&½:(À;(Ä;)Ê=,Ò<-×;.Ü8.á6.ä6/è5.ê24è.1ê+0ð/2ö37÷69î45æ21Ø/,×31Ô63Ï42Î/3Ð/5Û5?ä=Gõ,2ñ.2è2/Ü3,Ñ5(É8'Æ;&Æ>(Ä9$Æ8$Ë8&Ò:,Ø?1ÛA5ÚB5ÙA6ÎI8ÇB1¿<*½:&Á<)Ã?*Å<)Ä9&Ì;*Î6)Î0'çB<Ý1/ñ>Aå.2à'-Ò3-Ó4.Ö71Ö92Ò8.Í5*Æ2&À1#ÎE5ÆA2¼=.µ:+±9)®:+ª:,ª:,ª</«=.¬>/«=.«<+¬=,°?/µA4ÉSGàg^ßd_èkiînoæchðjqõoxüp}ýt~õmwîcj÷dlÿqzÿw|ûsuökpöXfûAYÿ:[õKfâ}…©˜†l”ojŠXo‰ZxŠ`�—r¶·˜âÜÂúôÞüúåÿÿïûÿïõÿïîÿëçúäÜïÙÐãÍÉÛÅ«Ù«¨Ó¦¨Ñ¥¯Ô©¶Ô®¼Ö±ÇÚºÒßÁàæÌêéÔòíÚòéÚïáÖìÛÑëØÑíÚÓèÛÒæÙÐåØÏZN>ZN>ZN>ZN>YM=YM=YM=YM=XL<XL<WK;WK;WK;XL<XL<YM=RJ?TJ@UL=XL<YN:ZN8ZN8ZM:YM?VKEXOP^Xbd_sifƒqp’yyŸ|¢~€§�‚°ƒ„¼††Äˆ‡Ë‰ˆÎ‰ˆÌˆˆÈƒ„½{~µux­or§jm¤eg acž…ac“X^±O\×H\ó=Vÿ1Kÿ/Dÿ7Bö>@çE@ÝJBÚKCÞHGéBLó<Nú8PØDDÕEDÈA=ÈIB³:/°7,ÌPFÉB<Î=8Ñ64Ï10Ð51Ó>8ÏE;ÆF9¿E6Á8(Ã:*Â:*¿:'½8%½:&¿:'Á:&Ä9&Ë:)Ò;*Ù9+Ý7+á5+ä3+ç4-í)-ò)/ù,3ÿ.4ÿ07ÿ18ÿ28ý58ú7;õ8<ò9?ò9Aô9D÷6Gû6Hü5Jø)1õ,2î02ã4/Ø7-Ï9*Í<+Ì=,È7&Ï9*Ø</Þ>2á?4â>4â?6â?6ÑN<ÍH7ÇB1Â=,¿:'Á:'Å9(È9)Ç3%Ó9/á@8ëD>Þ0/á-.ì38í38×4-×6.Ù80Ø:1Õ;1Ó;0Î:.Ê:/ÖL?ÌF:¿?2´9*¯7)«7*©8*¨8*ª<-¬>/­?0­=/«<+«<+­<,¯>0ÀKAÚc[Ýc^èkiðosëhnõrzüvïer÷oyør{öjsÿlvÿvÿu}öioõfl÷RbÿA[ÿ6YôFaÝt{²›‰€¤~z›f{—f€–h‘�u­±ŽÌË­áàÄéëÓî÷ÜåóÙÙíÑÎçÉÅÞÀ¼Õ·´Ë®®Å¨•Ã’”Â‘˜Ä“¡È™§Ë�¬Ë¡µÎ§ÁÒ®ÎÙ»ÙÝÄåãÎìåÕïáÖëÚÒçÒÍäÏÊÞÐÇÚÌÃÕÇ¾[N>ZM=ZM=ZM=ZM=ZM=YL<YL<ZM=YL<YL<XK;XK;YL<ZM=ZM=TJ@TJ>XL>YN<ZM:ZN8ZN8ZM:[O?WMDWMKZSZ^Xfb]sjfsp�vw–xxœ|{§�~µ„¿‡�Çˆ‚Ê‰ƒÉ‚}¿~zµzu­vq§vo¥sl¢og ldŸ‹PH•JE²FF×EOò@Lÿ7Dÿ3@ÿ8>ø<=íA=äE?àGBãDHèAKï=Mô:OÒBAÑGDÅA<ÂH=¯;.°</ÐVKÃ>5É83È.,Ç)&É.*Í:3ÌC9ÂD6¸@0Ã:(Ã<)Ã<)Á:'À;(Á=(Â;'Ã8%Ä6"Ê7%Ô8)Ù7*Ý5(á3(å3)è3*û03ÿ58ÿ7<ÿ38ÿ,2ÿ&-ÿ'-ÿ)1ÿ,3ù'0ô%/ú'6ÿ+=ÿ(Aÿ:ú2ö".ô&0î+1æ0/Ú1,Ò4+Ï5)Ð6*Ô6+Ü90æ>5ì>7ë:4é61è50é61ØL?×K<ÒF7Ê>/Ä6(Â3%È6)Í9-Í5*Ô6-æC<à74à21Ò  ì89ê35Ó2(Ô3)Ò4)Ñ5)Ï5+Ì5*È5+Å7+ãYNØRFÊH;¾@4¶</´;0³=1³=1®:-°</±=0±=.­<,«:*«:*¬;-±<2ÐYQÜb]ìppôvyîltõrzör}ÿy…ÿ�‰ýz‚òiqøeoÿp|ÿt}ýntó`j÷Naÿ@^ÿ3WôA^Ûnt¹ž‹Ž®‡~¡i}›g�—h�œq¡©‚µ¹–ÉÌ­ÕÜ½ÌÙ»ÁÔ´²Ì©¥ÃŸž¼˜˜¶�–²Œ”®‰…¶~†µ~�ºƒ•À‹›Ã�¡Ã‘¨Å—²ÉŸ¾ÎªÉÒµÚÚÂæßÍêÞÒéÖÐáÌÉÝÅÃÓÂºÎ½µÈ·¯ZM=ZM=ZM=ZM=ZM=ZM=ZM=ZM=XK;XK;XK;YL<YL<ZM=ZM=ZM=YMAYM?ZM=[N=[N;\O<\P:\O<ZM=YMAWLHXNOXQX]Ub`Yka\pifƒokŽsp›vq§{u³ƒ}ÃŠ‚ËŠƒÉˆÂŠ~¼‡z²ƒr¨†r§Œu­…l¥z^˜™G9¡C7´A:ÍC@á?=ì89ø:<ÿBCú<<ó=<ì>=ê@AéBIêCMëANê>NÌA<Å@9¾?6µ?3®=/±=0¿E8ÒMDÇ61Ô;6Ï1.Í2.ÖC<Ç?3´6'·?.½6#Á:'Ã<)Â;'À9%Á:&Ã:'Ç:&Ë:'Ð9(Ô7(Ö3$Ú."à/%ì7.ô=5ø72ù30ú.-û)(ý%&ÿ#%ÿ"'ÿ"'ÿ$*ù )ú!,ÿ%7ÿ'<ÿ;ÿ4ÿ3ý)7ð".ç"+ä*-Ý--Ó+(Ò-)Ü41â62é54ï64ó55ó12ñ-.ï+,í++Õ<4Ò91Ñ:1ëTK»"Ä+#ßF>È.&Ì/(Þ<7èE@â:7Ø/,Û.*ã41é:7Ý?3×;.Ï5)Ë3&Ì5*Î:.Ë;0Æ8.ìbWàZOÈD8¹6,º:/·9-¯3)²6,¯1%°2&®2&®4'¯7'²:,²<.³=/°:.ºC;Ö\Wìppñsvøv~ûyƒõq|ÿ{„ûx€øu}üs{ÿr~ÿq}ÿlxûisøbmôI\ÿ=\ÿ8[ñ:VÖek²–�‡¦}~¡i|šd}•c‡—j”ŸuŸ¥ ¨ƒœ¨„’£Š£|€Ÿvx›qw›o|�r� t„£w¯uƒ³y‰¹�½„“¾†—¾‡œ¾‹¢½�§¼“¯½š¾Â§ÏÌ¹ßÓÇãÒËÜÇÄÖ¾¾Ê»´Á²«¹ª£ZM<ZM<ZM<ZM<ZM<ZM<ZM<ZM<XK:XK:XK:YL;YL;ZM<ZM<ZM<ZL?ZL?ZM=]M=]N;^O<^O<\O<]P?[OA[NFYNJZPQ\SX_U^_Wbb\xibƒng‘qjžvp®€y½‡€ÆŠ€Å�€Ã�~º�t­Œn¢—q¤¡uªši ŒY‘©;.¨7)°6)À>1ÐB6Ü?6è?8ôA=ö=;ø:<÷:@ô<Dï?IèAIâ@KÜ?HÃ>7½=4¶<1°</ª:,¬;+¼B5ÐJAÚG@ÜA=Õ63Ò41Õ@9ÍC8¹:+¯6%¿8%Â;(Ä=*Ä=*Ä;(Ä;(Ç:(È:&Ï9(Ñ5&Ô2%Ú2%ã5*ê8.ï80ñ91ä2&æ0%ê.#ñ,$ö+%û+'ÿ,+ÿ-,þ)-ú%+û#.ÿ&5ÿ$9ÿ5ÿ1ÿ
0ð .ù-9ö2<å*1Û(,Ü.0Þ02Ý*.ò9>õ6;ú3:û06ú-2û.3ý14þ36×4/Ü:5Ù72æDAæDAÎ/+Ñ2.Á"Ö41á?<èE@à=8Ø3-Ù2,Ý60à91Ò<-Ï9*É5'È4&Ê8+Ë;0Ê<2Æ9/ícYáXNÉ@8¼3+À:1Á;2½7.À:1Á4+¾4*½4*»5*¸6(´6(²7(°6)´;0»B9ÓYTèllïqtöw~þ|†øv€ÿ|„ûy�øv~þuÿsÿo}ÿiwùeqùanöI]ÿ<\ÿ9\ô=YÕdh«�y€œsu˜`t’\w�]�cŠ•k�—p‹•p…”mp†_lˆ_fŠ\g�^j�_q•ey›i}�l€­r„²tŠ¸z�»}�½‘½‚–½„›»‰›µ†¡³�­¶—¾½¨ÏÆ·ØÇ¿ÖÁ¾ÒººÅ·¶º¬«²¤£\L<\L<\L<\L<\L<\L<\L<\L<ZJ:ZJ:ZJ:[K;[K;\L<\L<\L<\L?\L=\L=]M=]N;^O<^O<^O<_RA^QA\PD[NFZOK[PN]QS]ST_RlcXvh]…jb“sk¦}w·†}Àˆ}¿—…Ã™€¹›v©ŸoŸ¯t¢»v¥µi˜¤U…Ä92¾5-¹5)½>/ÇE5ÐG7ÚC8ä?9ó=<ú9>ü9Aú:Eò>GæAH×@EÏ@B¿<4¸90±8-«:*¨9(«:*»?3ÏF<ÙD>Ø96Ú65Ü:7ÜC=ÝOEÍI<²4%À9&Á:'Ã<)Æ=+Ç>,È=*É:)Ì9)Ï8'Ï2#Ó/#ß4*î=3ô?6ñ91í2+Ú7&Ý6&à3#å/"é-"î+%ñ,&ò+(ó++ð(+ò'-ú(5þ%8ÿ5þ2ÿ3ð(5ô.;ô4?ò8Cï;Dð<Eé5>å+6ñ1<ô/9ù-8ù+5ù,3ø-1ö.1ö01Ù1.ä<9Û64à;9ÿljæBAÒ.-Ð.,Û97á?<àA=Û<6Õ7.Ô6+Ô6+Ó5*Å8&Ã6%Ã6%Ä8)Ç;.Æ<1Æ<2Å;1ëaWáTMÉ<3¿0(Ë;3Ï?6Î;3Ñ>6Ú=8×<7Ô=4Ï<2É;/Â:.»7*¶6)·;/»@8ÏTMãgeíorøz~ÿ�ˆý{…ý{ƒùz�úx€ÿw�ÿs�ÿl}ÿftøbnø]kõG^ÿ:Zÿ9\÷AZÐ_c›gkŠ^e†Oh…Ol„Rt…X{ˆ\}ˆ^x„\q‚X`yO_P`†Ue�Ym•`uœg{ j€£m�­p…±tˆ¶v‹¹y‹¹yŒºz‘º~”º�‘±•¬€›©†©­’ºµ¢Ç¹°Ë¸²Ì´²¶­®ª¡¢ —˜[K;[K;[K;[K;[K;[K;[K;[K;ZJ:ZJ:ZJ:[K;[K;\L<\L<\L<]K=]K=]L<^M=^M;^O<^O<^O<`P@^Q@]P@\NC\NE[NF\OI]PJ`NdcSmfX{g^‰ohœzu¯„|¸†{µ™…º¥…´¯€ªºy¡ÈxŸÓušÍc‹¾OyêAFà@@ÕA=ÌF;ÈJ;ÉJ;ÐF9ÜB:î@?ø;Aþ:Dü<Gñ@HâAFÑAAÅ?<¾?6¶<1¯9+ª;*©:)­9*º?0ÎD:Õ<7Ö21â:9æA?áD?çTLÞVH½;+Á9)¾6&¿8%Ä;)É=,Ê=,Ë9*Î8)Ï3&Ò2&Ù3'å9/ñ>7õ>8ð50è-&×:)Ú8)Ý5(à2'æ/'é.'é,(é,*ç+*å(,è)1ï+7õ';ö";ú=ÿ"A÷8Gä(6ç/;ÿP\ÿ`lÿP\ò<Ió9Gé)8ï)8ô,9õ0:ô17ì01â*(Ü&#Õ2-Ú64Õ1/æBAÿrp÷TUÝ==æFFÛ=:Ú<9Õ:5Ò80Ñ7-Ï7*Ì4&É1#º7#¹6"»8&¿;,À</¿9.À:/Å<4åXQÜMGÊ70Ç/*×<7ÞA:Ú;5Þ=5ë<9ê=9æ?9â?8Ù?5Ð<0Ç;.¿9-»9,»<3ËOGàc_ìnoú|ÿƒŠý~…úx€øy€ùz�ÿx‚ÿt‚ÿl}ÿdtö_nóXhõE\ÿ6Vÿ7ZùC\ÇYZ‡mRWxIXv@\yCdzIl}Pt�Vw‚Xr�Xo�Wl‡Zl�^o•bu�h{¤l�¨o„ªq‡ªr„­q‡±rˆ´u‰·v‰·v‰·vŠ¸w�¹z‘´|�«z’¤|�¤…­«–¾²¦È·¯Ë¶±¯¬³¡ž¥•’™[K;[K;[K;[K;[K;[K;[K;[K;ZJ:ZJ:ZJ:[K;[K;\L<\L<\L<^K=^K<]L<^M=^M;_N<^O<^O<^O<^N>^N>^N?^N?_OB`PC`OEbM\cPdcUodZle‘vr¤~w«‚v¦“~©¬†«Â‰©Ð�žÛw“âk‡ÝXuÓFfÿ=MüDPðJNÞJHÌG>ÇG<ÍG<ÙD>èBBó>Cù>Gø@HðCIÞDDÍB=À?9½A5µ=/®:+ª;*©:)­9*º<.Ì?6áFBä<;ïABíAAÞ:8ãJBæXLÔL>È@0À8(»3#Á8(È<-É:*Ë7)Ð8+Î0%×3)à8/é;4ï:3î50ë0+è+'Û4,ß4-ä2.ë31ð43õ45ö58õ6;é/4ç.6ê0=î2Cò.Fõ*Gý,Lÿ1Tð<Hå3?ð@Mÿ_lÿlzÿWfõCSõ>Pî3Dî2Aî3>ê5<æ89Ü73Ð3*Ç/$Ì2*È-(Ñ61óXT÷\ZóXVÜ@AâHHÜB@Õ<7Î70Í6-Ï8-Í9+Ê7'Æ3!³:%²9$´;(¸=-¹;-¶6)»8.Ä>5ÛNGÙEAÎ50Ð1-á>9è?:ã81ä71ð/0ï11ì42é73â92Ø:/Ð9.È:.¾6*º7-ÈIBÜ_Yënlû}€ÿ…‰ýƒõv}õx~ùz�ÿx‚ÿs�ÿj{ÿdtö_nðUeôF]ÿ6Vÿ7ZúF_ÀTRvaBJo<Us?[vCdzIn~Qt�Vy„Zyˆ_wŒay”gv›hy¡l|§o«p„«r…«p†ªm‡­rˆ°r‰³tˆµt‡¶r…·r‡¹tŠ¸w�·{Œ­x�¤x™¤‚«­•À¹§ÎÀµÖÃ¼ººÆªª¶œœ¨ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:\M:^K<^K<^K<_L=^M;_N<^O<^O<]N;]N;^O<_P=_P=aP@bQAbQAeKTdN[aPc`Usga…rp˜xvž|r—Žv–®ƒžÌ‹ŸÝ‚“çr‚ïbsìObå>Rÿ-Hÿ:QþCTéDKÒ@AËA>ÎDAÖEBãEFêAFï@EïBFçDEÚEAÉC:¿?4º@3±;-©8(¨9(©:)®9(º:-Ë;3èIEë??î;>æ68Û2/ÞA:îZPõg[ÙQCÉA3¾4'À6)Ç9+Ê8+Í6+Ò8,Ñ0&Ü5-æ;4ë:4ê40è/,ê-+í-,ó4;õ3;ø3<þ2=ÿ1>þ0=ý0?ù0@ô1Añ2Dò5Kó5Oó0Põ-Qþ1Xÿ:dá7B÷O\ÿanÿ`nþXfùQbòEXé8Jó@Sê:GÝ2;Ò/2È3-Á9-º=+µ>(Æ9/¿2(ÙJBúkcÝLGáPMÍ<9Ï;9àLJÔ@<Ê7/Ê7-Î</Í<+Ë:'Ê9&®>(«;%­=)²?-±9)®4'º:1ÊC=ÕHAØC?Ô72×2.ç;7ì:6è2.ë2-÷)+÷+,ô.-ð3/é61â:1Ú<1Ò>2Â6)º4)ÅB:×XRçjhú|}ÿ†‰þ€„õv}öyú{‚ÿx„ÿq�ÿh{ýbtõ^oîSe÷I`ÿ9Xÿ9[ûI_ºQNmZ:Em8ZvCa|In�Sv†Y|‡]Šb��g‚—lœl{ m|¤o}¨p~ªo‚ªnƒ©l…©lˆ«qˆ®qˆ°r†³r„³oƒµn„¸p‡¹t‹µv‰¬tŒ¦wš¨„°´™ÈÃ¯ØÌ¾àÏÅ½ÃÓ«±Á›¡±ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:\M:`J<`J<^K<_L=^M;_N<_N<^O<^O<_P;_P;aP<aP<aP<aP<bP<fLOdMUaO]_Vkgb€sr’yx˜}t‘ŽvŽ­�’Î†’á}…ñowýbjýOXö>Hÿ$Hÿ0Qÿ;Uñ<MÞ<GÖAEÓEDÔBCÜCEàBCäADäABÞDBÔC>ÇA6¾>1·?1¯9+¨7'¨:)¬=*²=,À>1Ñ>7ß=:ç79æ/3ã/0á32Û94åNEülaïj[ÙQCÆ</Æ:-È:.É7*Í6+Õ8/Õ4,Þ7/æ93é62é1/ê.,î1/ó32ÿ0Eÿ/Eÿ-Dÿ*Bÿ%@ÿ"=þ:ø:÷'Aó+Gô/Mó0Rò+Rô)Vÿ1bÿ=nêHSÿ`mÿiu÷VeíKZñL]êCUÚ1DéARÝ7CÉ,3¹)(®0$¨9&£A&ŸD'¼=.º;,ÜZMá\SÍG>ÍD>Á61É;7ãUQÕF@É91È8-É:,È9(È:&É;%ªB)¦<&¦<&¬=*©8(¬3(¼=4ÒMFÕGCÝEBÛ96Ü30é73í41ì/+ó2-ÿ)/ÿ*/ý--ö0/ï4/è7/ß;1Ø>2É:,¼4(À;2ÏNHßb^÷yzÿˆŠÿ„†ùz�ú}ƒü}„ÿx„ÿn~ÿdwù^pò[léN`öHaÿ8Wÿ7YøH]²JGcS1Al6ZtDf~NuˆZŽc…�f‡’jˆ—n‰žs‡¤t‚§t§r}¨p}©n�©mƒ©l…©k†§n‡ªp†¬o…¯o�°l³k‚¶n…·p‡´s‡­rŒ¨wœ¬…²¹šÈÆ±×Î¿ÞÐÅ·¿Ò¤¬¿’š­ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8ZK8[L9[L9\M:\M:\M:`J<`J<^K<_L=^M=_N<_N<^O<`Q>aR=bQ=bQ=bR;bP:aO9`N8jNMgNRbQ[cWkjfuv’}}™�y‘’{�¯�ŒËƒ‡ã{|ùqsÿgjÿTXÿAGÿ#Mÿ.Tÿ7Wù9Pé>NàEM×EHÑ?B×BDÚACÜ@AÛA?ØC?ÏB9Å?4¿=0·?1¯9+©8(«=,°A.·B1ÇC7×D=Ú64å57ã,0ç02è88Ó0+Ï5-éUKÿznæ^RÎD7É=0Ê<0É6,Í6+Ö90Ú70ß82ä71ç40é1/í10ò53ø87ÿ=ÿ>ÿ>ÿ>ÿ=ÿ=ÿ<ü=ò:ï@ð$Ið&Nï$Qó%Uÿ0eÿ=sÿgrþalôXeîR_ïQ`îM]â?RÖ1Bß:JÑ4?¿-0±-(¦5'ž>&–C%�E"¯7&²9(ÒWHº<0ÁA8º7/º3/ÍC@ãXSÕHAÈ91Ä6*Å6&Ä5$Ä6"Ç9#¦B*¢<%£:%§<*¦7&©3'½A7ØSLØIEáGEÞ:8ß2.ê41î1-ï.)ù4.ÿ'-ÿ',ÿ)+ö*)í-(ä1*Ü5,Õ9-Ð>1½3(¼7.ÉHBÙ\Xôwuÿ‰‰ÿ‡‰ý~…ý€†þ†ÿx„ÿl|ý`sõZlïXiãHZóE^û4Sÿ3RóCX«E@\L*?j4Uo?d|LwŠ\†“h‹–l�˜pŽ�tŽ£xŽ«{†«x�©t|¨mz¦i}¥g¥h‚¦h…¤k…¦m„ªm‚¬l®j}±i€´lƒ·oˆ·sˆ°tŽ¬xœ®„²¹šÄÂ«ÐÇ¶ÖÈ»²½Óž©¿‹–¬]K7]K7]K7]K7]K7]K7]K7]K7^L8^L8^L8^L8^L8^L8^L8^L8\J>]K?]M@\L=ZM=ZO=\Q?^SA_T@_R?^Q@aQAcRBdQCdNAcM@pKEjKIfOUgZknl„v|ž}†¯ƒŠ´Š…®Ÿ‰­¸Š¦Ìƒ”Þ{~îumøl]ûfRðN[æDQä>LéANïCQí>Ké:Gê<Få:Bá;?Û;;Ö<:Ï?7È>4Á;/¼8+ :$¬C0¬=,®6(Â?5ÑD=Ð;5Ó61Û83Ü71Ý6-Ý7)Ü9(Ý='Ù;"Õ7à74õPLõXOÛD9Ç8(Ì?.ÒC3Ñ;-Ò4+ðGDâ.1ï4;ö4?ï+9ÿ@Qí(9þ&+ÿ*-ÿ*-÷"û#$ÿ()þ((òð"ú+1ì )î&1ò.<ç$5ÿYnë+@ÿ`jÿ^iÿYcûT[öPTìHIÛ@;Ê:1ÅA2½F2®D.Ÿ;$”5–7#˜;)œ=+§81«83ÁEC¿;9¾23Æ45È44×CAÜKFÚKEÑD;È:0Ä4+È4*Ì3+Ì2*·?1³9,®.#­'¶,"Æ7/ÓC:ÚG=äPFßE;Ù80Ü1*ç/-ô01ý/3ÿ.4ò14ó12ô01ó/0ó0.î1+é4+à8-Ö=/¾2#¾?0·>3Õ`Wçtqÿ��ù…†ôŠŒþ…Œÿwˆÿe}ÿ[wÿXuÿSoûJgûDcö7Y÷9]ç>[Ú]k„C=PI/F`;Xw<e‡Ku—[z�cz e|¤h¨l€©o¨l~§k~¦j}¥g}£f£e£e€¢e}¥p~§o«n¬k~­g¯e�±e„²g‡µjŠµpŠ²s�°z–¶‡£¿™«Ä¤¬Å§¦±µ�˜œz…‰]K7]K7]K7]K7]K7]K7]K7]K7^L8^L8^L8^L8^L8^L8^L8^L8\J<^L>^N?^N?[N>ZO=\Q?^SA_TB]QA]P@_OB`NBbPFcOFcOFkLGjMOgS\h_rnoŽw~ª~ˆ»…ŠÁ›–Ì¢Œ»«£»wŽÕx‚í|x÷uhöjYüZgóN\ìFRòHUöJVõERï?Jë;Eä9Aà:>Ú::Õ=:Î?7Ç>4À</º;,¥>+ª?-¨9(²:,ÁA6Å<4Ç7/Õ<7Ó40×4-Ø4*Ø4(Ú7&Û:&Û;%Ù;"Þ52æA;ëMDàI>Ð>/Ç8(Ê8)Ó;.Ý<2öJFæ/1ò5<ø6Aò.<ÿ?Pì'8ö$'÷%(û),ý+,ü*+ù'(ø((ø*,ð$'í%(ê%,þ:DÚ'ð4CüATÞ#6ÿluÿblþZcüW]õOSæBCÙ;8Ñ>6¾8,¾E4¹H6¨?,–1�)Ž(�)ž-'°:6ÑTRÎHGÃ54Æ45Ò<=ëWUØGBÖGAÏB9Ç9/Ä4+Ê6,Ð7/Ò5.Â?5À:1À5.Â3+É4.Ð83Ø?9ÞE=ãJBÞA8Ù6/Ü1*æ0-ó11ü03ÿ.3ò14ó12ô01õ/0ó0.î1+é4+à8-×>0¿3$¼=.¶=2Ó^Uévsÿ��ù…†õ‡Šþ‚Šÿu…ÿe|ÿ[vÿWtÿQoþIhúAaö8Zö=_æF`ÅQ\{?7NH.Ga>Yx=e‡Ks•Yx›aw�bz¢f|¥i}¦j|¥i|¥i|¤h{£e{¡d}¡c}¡c¡d{¤l}¦n}©l}ªi}ªe}­c¯c‚±cƒ±f‡²k‡¯pˆ«u‹«|�¬„�©‰‹¤†z…‡doqR]_]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8]L8^K<_N>aP@`P@]P?[O?[O?[RC[QE[QE\OF\OG_PKcQOfTRhTUiTQiVXi]kmi„sv¡zƒ¼�ŠÍ‰�Ö—‘ÙŸ‹Êª‚¶º}ŸÒ‘çƒ…ð~tïveÿ`k÷S\íGQðFQöHR÷EQô@Kî=Gå6=à7:Ù99Ô<7Í@7ÅA4½?0¸=-©@-¨=+ª;*¸B4ÅI?À;2»0)Ì92Í6/Ò5.Õ7,Ù7*Ù7(Ú7$Ü:%Þ<'ß3/Û4.âA9éOCÜH:Ç6%Æ3#Ù@2á>5õHDé13ó4;ú6@ø4@ÿES÷3Añ),í"&î#&û03÷--ï''í%%÷12ì(*ø7:è+1â)1ë3?ÿR^ï=KÿYiúafñV\îOTðMRêEIÞ:;Õ74Ô?9À6,¿?2»C5²>1ª8-¥3)Ÿ,%œ' ˜% §0*ÆFCÂ::¼,,È44×ABô^]Ò>:ÒC;ÐA9Ë=3Ì9/Ô=4Ú@8Ý@9ÙA>×=;Ü>=ãA?ã?>à;9ã?=ëIDàA;Û=4Ø5,Û2+å2-ð31÷12ú/2ó04ô02ö01õ/0õ/.ð0+é4+à8-Ø?1À4%¸9*´;0Ð[Rízwÿ’’û‡ˆøƒ‹ü~‰ÿr‚ÿcyÿZtÿTqÿMmÿFgü=_ø:^ôBbåQg§?Fn<1OK2KcA[z?h‡Lr“Zu˜^tš_wŸc{£gz£gy¢fy¢fy¡cx byŸb{Ÿa| b}Ÿby¢j{¤j{§h{¨e{©azª^|­^®`…³hŠµnŠ²s‰¬t†¦w‚žvy“pn‡gVb`COM4@>^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^L6`N:aP<`Q>]P?ZN>YPAXPEXOH[RM_UTcWYeX_iYcl\fm]hlbclemol�rtšx¶~†Ï„ŒßŠŽç‹‡Þ�ŠÙ¬‰É³­½y’Í{�ß�yê†vÿnrÿbgùU\öLUöFPöBMó>Gð;Dæ5;á7:Û97Ò=7ËA6ÄB4»B1·?.©;,­=/¯>0»G:ËRGÇH?¹6.º1)È91Í81Ó;0Ú<0Û;-Ù6%Ü6&à9'á40Û2-à=4ëOCãK=Ñ;,Ð8*àB6Þ7.ð>:é/0ò16÷4<ü8BÿNZÿKWý>Cò38â$&í/1ê,,ð22ç+*é0.ò::Ñæ37Ü-2ç9BïENÿYcôLYÔ?AÚADßCFá>CÞ9=Ü89Ø88Ó:5É83Â91½:2ÀA:ÍNHÖVSÐNNÆAB¯82µ:5ÏKGØNLãQRïYZêRQñYXÉ51Î>6ÑC9Ð@7Ó?5ÚA9àC<àA;í<Bê7=í8?õ>Cñ:?é58í=?øLJà93Ú70Ø4+Ü3,ã5.ì30ò21ô01ô04ô02ö01ö.0õ/.ñ0+ê3+à8-Ù@2Â6'µ6'²9.ÉWMî}yÿ“’û‰‰þ€‹ý{‡üoücwÿXqÿNmÿFhÿ?cþ8\ù=`íIdÙYhˆ25d<0SQ8TgG`}Ej‰Ps’Yt•\u˜^w�by¡ey¢fw dv awŸavž`xŸ`zž`{Ÿa| by¢hz£g|¦fz§bz¨_z¨]|«]~­_†²eŠµmŒ³rŠ­s†¦u€œstŽii�_RaZDSL8G@^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;^M;_K2_M5aO9_P;\O>ZN@XPEXQKYQO^X\g`hnfsshysg{sg}tfnnzor…rw•v|¬y‚Ã~†×ƒŠåˆ‹ì’�ë›ŒßžƒÆžt¢¡kƒ®mq¾vjÈ{iþllÿklÿfiÿ]`üQWöEMð;Bí5=è59ã68Ý98Õ>7ÎA7ÅC5¼C0¶A-¬8+´@3¯;.°;1ÇRHÓ]SÈNCº;2¾90Á7,Ì9/Ö>1Ý=1Ú6*Ü4'á7(á2-ã60ä=5åE9âF9ÜC3ÝA2á?2Û0&ì62ì0/ð-1ò-4ú7?ÿOYÿZdÿ[_ÿOSá.1ã03ß--÷EEè66Ü,,Û-.ë>@Û25Ù37ÿchÞ=CÊ*2Ê-4¾()Ô;=àAEÚ7:Ù37á8;Ü89Î..Ì43Í<9ÓHEÝSSì`c÷hnõdkî[e¿B<ÆE@å^[÷igÿopÿjjåKK×=;É4.Ñ>7ÕE<ÖC;Ó?5Ö<4Ø93Ø7/ö0=ò,9ó+6õ-8ò*5î+3õ8<þJKà3/Û4.Ø4+Ü4+â5.ê40ï4/ð3/ö/4ö/2÷/1ø-0ö..ñ0+ê3+â7-Û?2Å9*²3$±8-ÃNEî}yÿ’‘üŠŠÿ}‹ÿw…ùl|öatùUmÿHgÿ>bÿ8_þ4\õ@aâMcÂWap/+\A0XX>]lMbIl‰St’\u–_v™_xžcy¡ex buŸ`uŸ`u�_vž_wž_zž`{Ÿa| by£d{¥f|¦dz¨`y§^y¨Z{ªZ}¬\€¬_…¯g‡®m‡ªp…¥sƒ t{•nrŠffvi[k^RbU_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<_N<`L1aM2`N6^O:[N>YOE[RMZTT_Zahbprm�zuŒ{t“yr“zp“yo”ov’pyšt}¨w€·zƒÈ~…Õƒ‰á‹‹å”�ã—ŠÒ™„¼¡ƒ§ª„“«~yŸl[ŽX>ÈH?ÕPIäVRìVUòRRôJMî=Cè38ì7<ç9;à;9Ø=8ÑA8ÈC4¿B0¹@-³9.ºA6«5+£.$¼J?Øh\×eZÊVI·=2¸6)¾4)Î:0Ù;0Ü5,ß3)ä6+á/+å61ã;2Ü:/Ü?0ãF7ãC3ß9+ß1&ê3-ð31ï-.î*.ô17ÿEJÿS[ÿ_dÿ\aâ9<â9<Õ+.ôJKâ89×//Û55Ì()Ë(+÷YZÛ?BÔ9=Ð7:· %Ã))Û=>åBEÝ49Ù,2Þ17Ú/5Í(,Ò37äKNöaeûhnùcl÷_kû_mý_nÒNIÔOJè]ZêVTçMMãGHÑ32Î31ÙA<àKDãPHßKAØA8×:3×50Õ2+ÿ,;þ+:ü(7ø%4÷'4û/:ÿ=CÿILà1.Ü3,Û4,Ü5,á4-ç4-ì5/ï4/ö/4÷/2ù.1ù-0ø..ò/+ë3+â7-Ù=0É;-³1#°7,¹D;ìyvÿ��þŠ‹ÿyŠþq�õhxó`söTlüCcÿ7^ÿ3_ÿ3\óDcÒM^ JMb6+TE0W[@^kMc~Kk‡Tt‘[w•_x™`{ždz cvž`s›]s›\s›\tœ]v�^wž_{Ÿa| by¡bz¤b|§b{¦_x¦[x§Yz©Y{ªZ~ª]ƒ­e…¬i†ªm‰§s‰¥u„�s|•mv‡unmfwe_P=_P=_P=_P=_P=_P=_P=_P=^O<^O<^O<^O<^O<^O<^O<^O<cP2cO4aO7^O<[OA[RK^UV_Zakgvso†}z™‚~£�|¥}w¥{u¥{t§pz«s}°w‚¸{ƒÁ~†Ç„‰Í‹ŽÓ“’Ô˜“Í ”Â«›¸¼¦³Ç®ªÅ¦”ªˆl�mJ©?/¯A2¶@4ÄA9ØGBëMLñHKí?Aî;?ê:=å;;ß=:ØA:ÏA5Ç?1Á=.»;2¾?8¯4,¦1'ºJ>ÏcWÔh[ÔfYÁPB¹?2¹5)Ç7,Ô:0Ù5,ß2+ç6.ã0,ã4/â7/Ü8.à>1åC4â?0Þ4'æ4*é1)ò2/ð..ï-.ò14ô68ü?CðOTúY^éFKõRW×47ëFJÝ8<åBEÚ7:Î.0Ð15ãIKÑ8;Î8:¸#%Ñ<>Ü89ä;>ê=Aç6<â-4Þ)2â19ç<DñLSû^eÿksÿisú`l÷YhùXhûXkðgaèZVèWTØ@?Ï10Ô44Ó41áC@ãJDéRKèSLáJAØ?7Ø93Û81Ü71ý)8ÿ/>ÿ/>ý)7ÿ-:ÿ9CÿAHûABã1/ß4-Ü5,Ý5,á4-æ3,ì5/ð50÷.4ù.2ú.1ù-0ø..ò/+ë3+ã7-Ø:.Ì>0´2$±7,±<3çtqþŠŠþŠ‹ÿr†ýj}ñbtð]pôRjûBbÿ6`ÿ5aÿ8_ïKfÁN[z;6Y?.LH/TZ@]cIbzJj„TrŽ[v”^yšc{ždxžas›\p˜Yp˜Yq™Zq™Zt›\uœ]y�_zž`x¡_y¢^z¥^y¤\x¤Wv¥Uw¦V{§X~ª]‚¬d„«h†¨l‡¥o†¢r€šmx‘gr„lk}ecu]_O?_O?_O?_O?_O?_O?_O?_O?^N>^N>^N>^N>^N>^N>^N>^N>eQ6cR8aP<]P@ZPG\TR_Zab^otrŠyx˜�€¨ƒ�°~~²yx±wv°xw³t}Âw€Ã}…Æ‚ˆÆ…ŠÂ��À—–¾ �¼¬§»¶¬´¾³¯È¸©Ð¿¥ÕÂ¡Ï¼”Ç²‡·kS®\F¤G5©=0ÂH=áVQðVTòNOì?Aë=?è<<ä<;ß=:×=5Ï;1Ë8.¿82Á<5¹:3·>5ÀPDÅYMÅ]PÎgXÐdWÁM@º:-Å8.Ò91Ø3-ß2,è50æ40á2-à5-ã<3çC7æC4â:-à3%ê5*è-&ð0+ð.,ò21ò44ç.,è00áEIõY]öW\ÿpuåDJéHNÞ=Cü[aÿouÝ>Cÿ~‚ÿmqêQTÔ>@Å02Ñ<>øEIî9>ð7=ø=Fô6@è-8ö>Jÿ\hÿmwÿitÿdl÷]gú^kÿapÿ]nüWhî_YãOKâJGÕ74Ò0.Ù54Ó/.Ø95ßD?ãJDáJAÙ@8Ó6/Ö5-Ü71â94ð$0ý/<ÿ1=ø*6û/:ÿ>Eÿ>Cì44â3.Þ5.Ý6-Ý5,á3*è3,ï4/ò5/÷.4ù.2ú.1ù-0ø..ô.+í2+ä6-×9-Ï@2µ1$²6,°7/èpoþˆˆÿŠŒÿkƒücxð]pïZnôPiýAdÿ7aÿ8dý=bæPi°QW^2'RG3DH/PV<X\C_vHi€Rq‹[v’_z˜b|�dxœ_r™Zn—Un—Un—Uo˜Vr™Xt›\uœ]y�_vŸ[x¡[y£[w£Xv¢Uv¢Sw£Ty¥Vz¤X~¦_�¦c¡d~œf{—frŒ_k‚V`uVZoPRgH\L<^N>`P@`P@_O?_O?_O?aQAbRB_O?]M=]M=aQAcSCbRB`P@eS;aP<_O?^QH[QOZSZeapsq‰xxšz|¥~€±€�¹}¼xy¹rs¶no²qwÏv{ÍƒÌ‹�È–—Ã¤¤¾²±¹½¸²ÌÅ²ÓÍ­ÙÐ©ÛÐ£ÛÑ ÝÑ¡ØÌšÒÆ”Õ¦Š·�gŸ_FËzgØte¾G?ØQMøbaìILç>Aä79æ9;ã99Ü75Ù61Û94È95À50ÇB;¹=5¾I?ÄXK·PAËeVÎdVÊYKÃG;Ä:/Í6-Ù6/â5/å3/á/-ß2,â70ä=4à<0Û8)Ý5(å8*å/$ê/(î.)ð0-ï20ë40è51æ40Ó8<åJNõY]ëOS×7?×6>ùX`ÿ~†ÿ~†ÿowÿgoÿipÿfjõ\_ïY[ô^`ÿRYÿCKü8Bü7A÷1>ï+9î/>ñ=IÿS_ÿ`kÿgpÿepþboÿbpÿ`oÿ[lìTOßFA×85×31Ù10×/.Ú21Ü86áD=ÜB:Ø?7Ö<4×90Û81á83ä84ô5=ó4;õ3;÷4<ø5;ó49ë33ã1/Þ3,Ý6-Þ7.à5+ä3+é2,ñ1,õ2.ø/5ø03ú/2ú.1ù//õ/,î3,å7.à@4Ë9,½7+®/&·<5ÒXWÿ˜šù~�ÿh�ÿe|ö]rîRhòHeÿAeÿ9bÿ5`üJlÕRd‰==K. >>&?I.IO5]]EWlAcxMqˆZx’by–`t•\r–Xq˜Wl•Sm–Rn—So˜Vr™Xt›\uœ]uœ]tœVt�Wv Xw¡Wv¢Uv¢Uu¡Tt S{¥[{£\zŸ\u—Zn‹Uc}MXrCSj>AW1?U/<R,[K;^N>`P@`P@`P@_O?`P@aQAbRB`P@_O?`P@bRBcSCbRB`P@fVF_QD\OF_TRcZ_f`nmkƒwv˜wy¢{}°}¸x|»qt·lo¶ln¸oq»suÙ|}Ù‰ˆÔ˜—Ð¨§Æ¹¶½ÉÆµÓÏ©Ý×£âÜžçßžæÞ�äÜžâÙ ÙÒœÑÊ–Ñ¼�¸�€¦~dÄ‹wÉ}m¶VJÓ`Y÷qnîZZêJLä>@é<>ì>@è:;ã56á34Õ=:Ë73Ê?8¹6.·>3¼L@³I;Å^OÛp`ÒaSÄH<½5)Ä0&Ö5-Ý4-Ü/)â43å95å<7à<3Ü8.Ù5)Ý5(ã5*í6.ï4-î1+ë0+ç0,ã2,á4.Þ5.Ò9;×>AäIMóW[ü\dü\dþ]eÿ`kôR]ïMXñQ[ÿ_gÿjqÿflô[`ëRU÷07ó+5ô+5ù-9ó&5è/ç'6í7DüP\ÿ[dÿclÿemÿepÿdoý[hõP^åFBÞ<9Û64ß63á53Þ20Û2/Û62à>9Û>7Ö<2×:1Ú91ß82å95è96é9;ê7:ë7:î79î79ì57å31Þ3,Û4,Û7-Þ7.á6,å2+ì1*ó0,ø1.÷05÷03ú/2ù.1ù//õ/,î3,ç6.ß=2Ò>2Â8-µ2*·82ØZ[ÿ�“õw{ÿa{ÿ^v÷WqöOkøFfý=bÿ:cú=cëLhºJVw<8F5#7=#9C(DH/UP<Tf>`rJnƒXw�_v“]t“Zp”Vn•Tk’Ok”Pl•Qm–Ro˜Vr™Zsš[sš[tœVu�WuŸWuŸUtžTržQq�Pq›Qn˜Pl”NhŒLb�FXu?Nh8F]/@W+@W-@W-AX.YL<[N>^QA^QA^QA^QA_RB`SCaTD`SC_RB`SCaTDaTD`SC^QAbUM^QK[QPcYakesqm„vu•y{¤y{®y~¶w}»ns·ei°bf°jn¸rvÀ}zá‡ƒá–”ß©§Ù¼¸ÏÍÊÃÝØ¸çá­êå¡ïéŸðêžíæžéá¢âÛ¤×Ï ËÄ˜´°“¦œ�˜„k§„p¥p`œRG»]UÞmi÷usð^_çHLæ@Dí@Dí=@ë7:ç36Ü>;Ô;6ÔA:Â70·7.µ?3­=/µG8Új\Þj[×\MÊB6Å2(Ñ4+Ú6-Ú1*Þ44éA>ìGCà=6Õ2)Õ1'Ú2'Þ0%è3*é1)ç.)æ/)ã2,â7/á=4âA7Ã-,Ê43ÜCEðVXú^bùYaóS]òP[èFQêHSðNYü\fÿmvÿmtôY_ÜAGó*2õ,4ý1<ÿ1>÷*9ï&6ö6EÿJX÷ISõOY÷W_ü_fÿdkÿai÷Q[éBJÞ95Þ63ã75é<8ë<9ç85â51Ý60Ý:3Ù;2Ö90×90Û81á83ç:6ì:8à;9â:9ã99ç98è88å84à40Ú3+Ú6,Ú8-Ü8,á6,å3)ì/)õ/,ú0.ô15õ13ø02ù.1÷//ó0,î3,ç6.Ý9/ÛD9Æ9/»4.´0,â`bÿƒˆônuÿ_zþWsúPmþLlýDfø8_ö9_ðGf×Re�DJi=4K@,7@%8@(ED/LE2N^9YkEg|Qr‰[t�Zq�Um�Rk�Mi‘Kh‘Ki’Lk”Pm–To–Up—Xq—Zu�Wu�WtœUrœTpšRm—Mk•Kj”Ld�GaˆE\~AUt;Li3E_/AX*>U'B\/E_2Ic6WJ:ZM=\O?^QA]P@^QA_RBaTD`SC`SC`SCaTDaTD`SC_RB]P@YNR[PVbXcjcsqm†vu•xz£z|­w|´sy·mr¶bi±]c­ag±lr¾v|È‹‡æ”‘è¤¡æ·´áÇÄ×ÕÒËáÞ¿èå²ëç¨ïê¦îé¥éã¥ãÜ¨ÛÒ§ËÃŸ¾µ–Ÿ§�˜š…�‰v—‚q—se™cW³i`Ïrmû‹‰õutë[[çKNéCGî?Dî;?í8=ß:8Ý;8ßD?ÓC;Ã:0¹;/¯7)¦2#¾J;ÚbRék]ÛSGÉ9.Í3)Ö5+Ø4+Ù33ñMLý[XíKFÙ80Ö3*Û4+Þ2(à-&á,%á,%ß,'Ý0)Ú6-Ø<0×?2À0(Ä4,Î:6ÙCBßFHàEKäGPìLVñQ]öVbøXdû[gÿgpÿmuôY_Ø=Cñ.2ò-4ô-4ò*4í%2ì(6û<KÿS_í?IçBIèGMòQVþ[`ÿX]ôGMä5<á51ä73ê;8ó?>ô@?ð<;ç85à72Ü92Ø:1×90Ù80Ü71ã73ê86ì87Þ<9ß;9â:7ä;8æ:8ä84Þ5.Ø4+Ù7,Ú8-Ü8,á7*å3)ì/)ô/)ù/+ó25ô23õ12÷/1÷//ó0,î3,ç6.Ü8.ßG<É90¾3.´-*îfjÿy€ójrÿ`{ýTqþKkÿFjÿ=cö3[î<^äPhÄXe…DBbE7WP=DH1@D-JH3JB/IW4Sc?btLmƒUp‹XoŒRkŽNiŽKg�Ig‘Ih‘Kj“Mk”Pm–To–Wp–YtœVs›Uq™Sn—Qj”Lg‘IeŽHd�G`‡D]�AWy=Rq8Mi6Lf6Ne7Pe:Lf6Oi9Sm=UH8WJ:[N>\O?]P@]P@_RBaTD_RB`SCaTDaTD`SC_RB_RB_RBTLY`Xgnf{tp‰xt•xw¡xz«y{´sy·jqµ`g¯\b¬`f°kq»v|Æ~„Î•”äžžè­­é½¼æËÉßÕÓÔÝÜÊãàÁåâ¹çã¶æß³àØ³ÚÑ´ÐÅ¯À´¤¯¥™”œ�‰��ˆ†y‰}q�wk›sk§ngºoiæ‰„î�~ósróedòVYòLNðCEî>Aå95â:7äB=ÞE?Ì<3Æ=3ÂB5­1%¬1"ÇI;ÛYKÖN@Ì=/Î8*Ò6*Ñ3'Ö34õUUÿkhú]XâE>Ü;3ß;2ã80â4-ä1,â1+Ý0)Ö/'Ì0$Æ/$Â0#Ã9,À4'Á3)Ë:5×CAÛEGÛBGÛ@HàDOìOZóVaòVaú^iÿgoóYaÝDIð88í55ï26ð18ò3;÷9CÿHSÿVaä6?Ý4;Ý7;êAFøKOüIMô;@ê05å61ë95ñ;8ó;9ó;9ð:7é73â70ß;2Ü;1Ù;2Û:2ß82ä73è64ì65á<8ã;8ä;8è:9è;7æ95á6/Û4,Ú8-Û9,Ý9-á7*å3)ë0'ò/)÷0+ð45ñ33ô22ô01ö0/ò1,î3,ç6.Þ7.ÞD:Ê7/¿1-¾21÷jpÿrzøhrû]vúPmÿCfÿ<dÿ7cù6^éDbØ[m©W[uF>_L;_ZFQP;KI4PI6MB0DR1M[8[kFf|Nm…SmŠPlŒMh�HfŽGg�Hg‘Ii’Lj“Ol•Sn•Vo•Xt™Vq˜Un–Pj’Lf�IcŒFaŠF_ˆDZ�@X|?St;Pn8Pj:Tk=XmB[pEUp=Vq>Wr?RE5UH8XK;ZM=[N>\O?^QA`SC`SCaTDaTDaTD`SC`SCbUEdWG]Ulje|yu�}yœzy£wyªvx±sw¶lqµcj²[c¬]e®hp¹w}Ç�ˆÐ†�Õ™�Ü¡¦à¯²å»¿åÆÇãÍÏÞÔÓØ×ÖÑÙ×ËÙÕÉ×ÑÅÒÉÂÌÂÀÅ¹»´§®¥˜¡‡Œ†xzuwvqulg~mfŒoi�b[œa[¾sm×zuï{ü|yÿrpýccöSTîHHñB=ê>:ã<6àA;Ñ:1ÒD:ÝTJÂ>2¸6)¼:,Â=.È?/ÏA3×C5×?1Ñ8*Ð23èLMú_]ñXSßD?Ø;4Û81à70æ92ç92ç92â92Ú9/Ñ9.È9+Ä8)®)¸3"È@2ÓI>ÒE>Ë;:Ì7;Ð9@Ï8AâHTïUaðYbõ^g÷`iêU[ØCIè?:ë?;ñAAúGJÿMRÿQYÿT]ÿV^á4:Ú/5Ú03ç7:ô=Aù:?ø48÷/2é61ï95ð95í41í1/ê20ç40á4.ã<4à=4Þ=3Þ;2à93ä73è43ë33æ:8ç98ê88ì89ì87é75ã4/Ü4+Û7-Û9,Ý9-ß7*ã2(è0&ï0(õ0*î45ð43ó32ó11ô1/ò1,î3,è5.à90Ù<3Ì70Á0-ÑAAÿnuýku÷coïSkóIfÿ;cÿ1`ÿ3bÿ<dçMgÇ]i†IFeH:YN<\WCXQ>RJ7QF4MB0AL.GU4Sc>`rHgMj‡MjŠKh‹Ge�FfŽGf�Hg�Ji’Nk”Rl”Um“Vq–So”Qj‘NgŽKcŒH`‰E_ˆF_†G\‚E[~DWxAVr?Uo?YpB]rG_tKYtAYtAXs@NB2QE5UI9WK;XL<ZN>\P@^RBaUEbVFbVFaUE_SCaUEfZJj^Nkg‚up�|x›{y¡wx¨vw­pt±jo±ah®^f¯_g°em¶pxÁ~…Í‰�Ø�–Ü™¡Ï ¨Öª±Û´¹ßº¿ß¾ÂßÂÄÝÅÆÛÆÃÖÅÁÒÁºÌ¼³Æ»¯Å´¨¾¦˜±—‰¢†‡‰qqstpqogevhe†nj�`Y”e_š[T·g`×tnî{vÿ{wÿwsÿhfù[ZÿQKöGBè=6èC=Ø;4ÛG=ê\RÅ;0Ä<0½7+¾6(Ç>.ÑD3ÔC2ÔA1×A0Ò8:Ø>@ÜDCÛC@Ö=8Ó91Ø7/Þ7/å:3æ93å:3â;3Û>5ÕA5ÑE6ÌG8¬.¼;%ÌK8ÑL=Æ=3»0+¿10Ë8>ÕBJáKVëU`ðZeð]eìYaßLRÐ?DÑ4+Ö8/ß<7ê@@ñDFôEJñBIî?Fâ5;ß26ã36ï8<õ79ù14þ-2ÿ.4ë40ð95ò64ì0.è,*è/,è2.á2-ä=5à=4ß>4ß<3ã:5ç85ì65í55ì57ì57í57ï56ï56ì42å2.Þ1*Þ7.Ü:-Ý:+Þ8*á3(ç1&í1(ò1*í55î53ñ42ó11ó1/ò1,î3,è5.ã;2Ò4+Ò;4Æ20çUVÿpxùcnñ[gãKbóEfÿ7bÿ+]ÿ1bÿ@hÞKe­RYd8/ZI7SN:UN;[P>VI8M@0MA1=H*CN.K[6Xj@ayGf‚HhˆIgŠFeŠDc‹Bc�EeŽHg�Lh‘Oi‘Rj’Tn“Pl‘Nh�Ld‹Jb‰H_ˆF_‡H`‡H_…H_‚H]~I]yH]wH`wKcxOdyP[vA[vAZu@MA1PD4SG7VJ:WK;YM=[O?]QAcWGdXHdXHbVFaUEcWGj^NpdTvq‘yu˜xv�tsŸrr¤su®lp¯bg«Za©^f¯em¸lt½u}Æ�ˆÐ�”Ú•œâš¤ÈŸ©Í¦°Ô¬´Ù°µÛ±µÚ²´ÚµµÛ³±Ö²®Ñ®¦Ë«¡ÄªžÂ¦˜»™‹®‹{Ÿ|y€dbgidhbY\g[[xeauXR�e]ˆOHŸVO»aY×jcóvpÿ}zÿwuÿljÿZUÿPJñD>ôMGàB9ßF>êWOº,"¼2'½5'Ç=0ÑE6Ë>-Á2!É8%ÙF4ÞDFÒ9;Ë32Ë62Ó;6×<7Û<6á<6æ;4å82à5.Ø4+Ï5+Ê8+Ä<.Â>/ÑU;ÅI/»='½;+Ã=2Ä;5Â65Â37ÜKRÞLVâOYåS]éWaæU\ÝLSÒCGÉ5)Ð8-Õ81Ú64Ý55ß58á4:ß28å8<å6;ì9=ö<?ú6:ú,0ÿ).ÿ.4ë4.ò94ô86í0.é,*ë/-ê40ã5.ä;4à=4à=4á=4ä;4è96í76ï56í36î15ï05ð24ñ35ì31æ0-Ý/(ß7.Ý9-Ý:+Þ8*à4&æ1&ì1(ñ2*ì65í53ð42ò21ó1/ñ1,î3,è5.å=4Í/&×>8É53øceÿpyô\hêR_ÞHaõGhÿ:eÿ*]ÿ/aÿ@hÓE]–AFQ-!UJ8PN9OH5\O>YH8L<-NB2:D)?J*GU2Rd:]sBcEf†GeˆDcˆBa‰@a‹CcŒFeŽJf�Mg�Ph�Rl�Pk�Of�LcŠIaˆG_‡H_‡H`†I\‚G]€H]~I`|Ka{Ld{Of{Rg|S]xC^yD_zEAC8CE:IF=OH@RGAWI@]M>`O=aQ:aS9`T>_VGaZTfaeljwro€wožzt¢~wªzu«ro¨hf¥a`¢^^¦ba­hg·qoÃ|xÏ…€Ú�‰ã—�í�–ó¢žÙ£ŸÚ¥¡Ü¦¢Ý§¡Ý¦¡Û¥ Ú¦žÙ¥�Ö£œÒ¢™Ð¡˜Íž–É—�ÁŒ‚´ƒy«mrvghlc_`e[ZlYUtUP€UL�VK–RG¨ZN²ZP½\SÔmdç|tò…~ü�ˆðxyõyyæabÜPQ×EEñYVÎ61È1(Ç5(Ä7&Â6%Ã8%Æ9'Ì:+Ð<.Õ?1Ô8+Ö=/Ø?1Ó;-Í5'Í4&Ø:.ã?5à90á90Þ7.×7+Ï7)È;)Ä@+ÁC,Ä;3È?7ÍD<ÏF>ÌC;Å<4»2*µ,$Ä>5ÍG>×QHÞXOá[RßYPÖPGËE<Ì<!Ò<$Û:(å4,ë--ó'0÷%2û$6ÿ(@ÿ'@ÿ'Bÿ&Bÿ%Bÿ$Bÿ!Aÿ!Aÿ:ÿ"<ÿ'>ÿ)<ö*6í.6ç48å;;Ü94Ü:5Ý<4à;5ã:5æ93é73é62ì25ì44ë54è64ä71ß7.Ú6,Ø6)Û9*Û:(Û:&Ü9&ß8%á8%â7#â7#í41ï4/ñ4.ó3.ó4,ï5)ê6(å8*à:.Ø7/×96Ý>BÿlyÿasþRlöGdÿIjû5Yÿ5]ÿ;eú=cãPj©LVT)":1 9<)EF4RL>PH;BC39E15K4FGHJ#MQ,U\:\jGcuOf}Qe�Nc…Hb‡BaŠ>cŒ@e�Dj�Il‘Nm‘Qj’Ii�FgŒFf‹Ff‹Hf‰Ic…Ic‚GdƒJd�Ic~Gc~Gd€FfFe~Dc|BX}8[€;^ƒ><?4?A6FC<JE?OF?TG>[K>^M;`O;`Q:^S?^WGa\Vhcinlyrqƒtnšvpžtp¢pm¢gfŸaaŸ]^Ÿ\\¤ed°kjºtrÅ}{Ï†‚ÙŽˆà”Žè˜’ì›—Òœ˜Ó�™Öžš×�™Ö�—Õœ–Ò�•Ñž–Ñœ”Íœ“Ê›’Ç™‘Ä“‰»ˆ®€w¦tmtkdkf]`e[YiZSoWMzVJŠVI›UK°\RºYRÁXRÓf_Þqjãvoêwý‡…ÿˆ‡÷uuðfdäTSíYUÇ2+Â/%Æ7)Ã7&À7%Á8%Ä9&É:*Ï;-Ó=/Ö8,Õ9,Ó:,Ò:,Ñ9+Ñ9+Ô8+Ø8,ß;1à90Ü8.Ø8,Ð8*Ç:(¿;&¼;%¿4-Á80Æ=5É@8ÊA9È?7Å<4Â91¾5-Ç>6ÑH@ØOGÚQI×NFÌC;À7/Ê8Ñ9"Û8)å4,ï./ö*3û(7ÿ(:ÿ+Bÿ*Bÿ)Aÿ&Aÿ$@ÿ >ÿ=ÿ<ÿ8ÿ9ÿ$;ÿ);÷-9ï29ê7;å;;Ü94Ü:5Ý;6à;5ã:5æ93é73é62ì25í36ë54è64ä71ß7.Ü5,Ø6)Û9*Û:(Û:&Ü9&Þ9%á8%â7#â7#é4-ê3-ì4,ì4*ì4*ë5(æ6)á7*Þ</Ó5,Ó52óTYÿesÿ[põGbüKhÿ@dÿ:`ÿ1[ÿ7aùImÐJb‰8?O,&=7'3:(:=,C@1F@0@?-;C.:H1@CKP'\b<eoLhvRezSd~Qd‚LaƒFa†@aŠ>cŒ@e�DiŽHk�Ml�Pl’Ij�Gh�Gf‹Ff‹Hf‰Id†JdƒHe„Kd�Ic€HdHe�Ge�GfEd}C\�<_„?b‡B69.:<1??7E@:KB=OE<VH=[K<^O<\O<\TA_WLc^[helol}sq†sm™qk™jg–c`•\[”ZZ˜\]ž\_¦hjµno¿wxÊ�Ò†„Ø‹‡Ü�Šà’Œâ“’Î“’Î“‘Ð•�Ð”�Ñ“ŽÐ“ŒÏ’‹Î•ŒÍ“‹Ç“‹Ä”‹À“‹¼Œ„³ƒz¥{r�€dpt_fiZ]c\Vc\ReYKqWH„TF£ZQ¾_YË[YÐXWÛcbßliÝpkàwqûŠ†ÿŠ†ÿ…�ÿ|yømhï`ZÄ4+À2&Ä8)Á:'¾:%À9%Â9&Ç:)Ì:+Î:,Ù9-Ó5)Î5'Ð8*Ô>/Ô>/Î6(Ë/"Ú:.Û7-Ù7,Ö8,Ñ9+É:)Â9&¼8#¾4*À6,Â8.Ä:0Ç=3Ê@6ËA7ÌB8Å;1Ê@6ÏE;ÐF<ÒH>ÑG=Ê@6Â8.Í6!Ô7&ß7,é3/ñ03ø,5ý*9ÿ*<ü'=ü'=û%=ù#;û!:ü8ü7þ7ÿ6ÿ6ÿ#8ý*;ù1<ñ6=é9;ã;:Ü86Ü:5Þ;6à;5ã:5ç85é73é62ï26î47í55ê65å61ß6/Ü5,×5(Ù9)Ù9)Ú9'Û8%Ý8%Þ7$à7$à7$â4+â4)å4*å5(ã6(â7&Þ7'Û8)Ý=1Ï2+×98ÿltÿ]nþPið=[ÿJlÿ5\ÿ=eü4[ô<`êTq«?Oa#(H1+79+-8'18&:;)B=*A<(@>)@B*?GY`4s~T€Œfw‡bi~Ub|MaI`ƒC`…?aŠ>cŒ@hŽEj�Jk�Ml�Pn”Kk‘Hh�GgŒGgŒIh‹KfˆKf…Je„Ke‚Jc€He�Gf‚Hf‚Ge�FcDb‡BeŠEh�H06*58-;<4A>9G@:KB;RE<VJ<XL<YN<YRB^WOc_`igrom‚ppˆpm˜jg”`^�WW‹TUŽWY–\_¢ad«ko¹qtÃ{|Ì‚ƒÕˆ†ÙŠˆÛŒ‰Ú�ŠÛ��ÍŽŽÌ��ÎŽ‹Î�ŠÑŽˆÐ�‡Ï�…Î�†ÊŽ…ÆŽ†Á�‡¼�‡¶‰‚«€x�xq“‹[i}WbmWYa]T\`Q\^IhYF}SCŸULÂZYÔW[ÝV\çbeçkkàplâysê}vì{uýƒ~ÿ†€ÿ�{õkaÉ<2Â9)Â;(¿:'¾<&½;%Á:&Å:'È9)Ë9*Û9.Ö6*Ð4'Î8)Ñ>.Ð?.Ë8(Ç/!Ò6)Ó5)Ô4(Ò6)Ñ9+Í<+È=*Ä;(Æ9/Æ9/Æ9/Æ9/Ç:0È;1É<2Ê=3ÒE;ÒE;ÐB8Ë=3Ë=3ÏA7ÏA7Ë=3Ñ4#Ø6)â5.ë31ò/5÷+6û(7ü)<ù&9÷&;÷&;ø'<û&<ý%<ÿ$:ÿ#:ÿ!7ÿ"7ü%7ù-9÷5>ñ:?ç9:à87Ü86Ü:5Þ;6à;5å95ç85ê65ë54ñ27ð37î66ê65æ72á6/Ü5,×5(Ø8*Ø8(Ø9&Ù8&Ú7$Ü7$Ý6#Ý6#Ù6'Ú7(Û8'Ü9(Ü9(Û:(×:'Ö:+Õ;/Î3.éIKÿo{ÿVjøDaö=_ÿCiÿ/[ÿ7`û=cëLlÆOe€0=G >3--3'+8'2=,=B.B@+C;$G="MA'R_*q}M�Ÿp—¨|ƒ˜mj„W_{J]~E_ƒCa†@b‹?f�Ck‘Hl‘Lm‘Qm‘So•Ll’IiŽHh�Hh�JiŒLhŠMiˆMf…LdƒJd�Ge‚Hf„Hh„If‚Ee�Df‹FiŽIl‘L-3'17-7:3<;6B=9G?<MD=QG=SI=SK>UOCZUQa_dhgukkƒllˆjg’ba�XV‡PP†QQ�XYš`cªfj´orÁuxÉ|Ðƒ„Ö†‡×‰ˆØŠ‰×Œ‰ØŒŒÌ‹‹ËŠ‰Í‰‡Ð‰…Ñˆ„ÑŠƒÓ‰‚ÐŒ„Ï‹„È�…Á�†º�†²‡�¥}x–vpŠ“ScƒQ\qUT`^RVcOTbH_]DvUB’LB¼RRÖPWàPYé\dèejâljâwqâvláphõ~vÿ‚{ÿ‡~ôkaÉ?2À8(À;(¿='¾='¿='Â;'Å:'Ç8(Ê8)Ü8/Ú7.Ô8,Ï9+Ê;+È;*Ç:)É7(Ï9+Ñ7+Ô8,Ó7+Ï7*Ì8*Ë<,Ë>-É=0Ê<0Ê<0É;/È:.Æ8,Å7+Å5*Ð@5Ð@5Í=2Ë8.Ë8.Î;1Í:0É6,Ò.$Ù0)ä2.î23ô/8ù-9û+;ü+>ü-?û.?ú0@ü/@þ/Aÿ.?ÿ-?ÿ->ÿ)9ý)8ø*7õ0:ó6=ì9=ã77Ú53Ü86Ü:5Þ;6â:7å95ç85ê65ë54ò38ñ48ï56í76æ74á6/Ú6,×5*Ö9*Ö9*Ö9(Ø9&Ø9&Ù8&Ú7$Ú7$Ô9%Õ:&Ô<'Õ=(Ô=(Ô=(Ó>*Ó=.Ð8-Ù;8ÿ^eÿaqÿPi÷;\ÿAiû6aÿ/]ÿ.WøIjÛYq•>NX'-?+,730*1)-9-5@/:B+<<"B;VG(iV6v‡P�£lª¾‹¨¾�Ž¥wo‹[aK^F`…BcˆBeŽBj“Go•Lp•Po“So“Uo•Ll‘KiŽHgŒGiŒJiŒLi‹NhŠNf…Je„IdƒHfƒIg…Ih†Hg…Gf„Fg�Ii‘Kl”N*2%.4*470894<;7B=:HA;KD<NH<NH<OKBUTR_^ffewgg�fg†ba�[YŠQQ…NO‡RS“[^£ei³lo¾sxÊx}Ñ�Öƒ…Ø†‡Ù†‡×ˆ‡Õ‰ˆÔ‡ˆÈ†‡È……Ë…ƒÎ„�Ð…€Ô…€Ô‡Ò�„ÓŒ…Ë�…Á�…¸‹…«„�{vŒrn•N\ƒNTqTPa_PWgMReI\`EsXC�OCºTRÔSXàPZëYcé`gähjçqqê{rärhö}tòsjþxmæ\QÄ:-¾5#À<'À>(À>(Á=(Ä;(È;)Ì9)Î8*Ú3+Ù6-Ö:.Î:,Ç:)Â9'Ä;)É=,Í>.Ö@2ÙA4×=1Ï7*Ê4&Ê8)Ë<,È:,È:,É;-Ê;-Ê;-È9+È6)Ç5(Ê6*Ï;/Ò>2Õ>3Ö?4Õ>3Î7,Å.#Õ)%Ü-*ç02ñ29ø0;ü/>þ/?ý0Aú0@÷1@ö2@ö0=÷/:ù-9ú,8ü*7ý/<ù/;õ0:ñ2:í6;æ68ß55Ù42Ü86Ý:5ß:6â:7æ87é77ê67ë54õ49ó49ð69í76æ74ß6/Ú6-Ö6*Õ7+Ô8)Ô8)Ô9'Õ8'Õ8%×8%×8%Ï:$Î<%Î>&Í?'ÍA(ÍA*Î@,Ï=.Ð71éIKÿgrÿOdÿHfû7]ÿAmý/_ÿ1^ø1XåOj¹Wfh39@*,?994443524925>-2<#29ECl`8Ž}R™±u©Á‡µÎ—­È•’®}v”be†Q_ƒF`…Bc‰@g�Do•Jr˜Or—Rq•Up”Vo•Ll‘Kh�Gf‹Fh‹IiŒLi‹Ni‹Og†Kf…Je„If…IhˆIjˆJi‡Gg…Eh�Jk“Mn–P(0#*2'/4-350664<87@<9C>8IE<HE<KHCQQQ[[eabvab~`a€_]ŽZXŠTTŠTT�\] gi´psÄtyÍ{Ø~‚Û�…Þ„†Ýƒ…Øƒ„Ö…„Ò†…Óƒ‡Ç„…ÈƒƒË‚�ÍƒÓ„€Õ†€Øˆ€Õ�„Õ‹„Ê‹ƒ¾‹ƒ²ˆ‚¤�|’uqlirŒOVNQpUNc`OYgMVfI]dEo]EˆTF²[TÌXYÙSZæYaé\dèaeðknñ|rìsj÷xoÞYPå[QÒD8Ã5'Æ:)Ã:'Ã<(Ä='Æ=*É<*Í:*Ð8*Ó7+Ö/'Õ2)Ò8,Í;,Å<*À;(À;(Ã<)Ç;*ÕC4áK=ßG:Ô</Ê4&É5'Í;,È9)È9)È9)È9)Ê8)Ê8)Ë7)Ë7)Í7)Ó;.×?2Ù?3Ú@4ÝA5×;/Ï3'Þ..å12î49÷5>û3>ú0>ú0@ø/?ò.<ï/<í/9í07í.5ï,2ò+2ò)/õ1;õ3<ò5;ì59ç47á55Þ65Û75Ü86Ý97ß:6ã:7æ87é77ê67ë46ö5:ô5:ñ7:î87æ74à72Ù6-Ô6+Ñ8*Ð8*Ð9(Ð9(Ð9(Ñ8&Ñ8&Ó8&È:"Ç;"È>$Ç?%ÇA(Ç@*Ê>-Î;1Õ:6üU\ÿ_oÿGcÿ>bÿ8cÿ6gÿ0cÿ4\òCbÈMa…BIL44:97<<>948>58<7379+3="8DS[,ƒ�Pª£o«Èˆ¯ËŽ¯Ì’¦Ã�‘¯}{™ggˆQ^‚E^ƒ@c‰@i�Do•Js™Ps˜Sq•Uo“Un“Mk�JgŒGeŠEgŠHh‹Ki‹Ni‹NfˆLd†Id†Ig‡Hi‰JjŠIi‰FhˆEi“Kl–No™Q&.!(0%-2+130333756:97>;6GD=DD<GFAOOQZZd_`t^_{\]|`^�\ZŒYX‘\\œgg¯qrÂz|Ó}�Ü�„ã‚…äƒ†ã„…á‚„Û�‚Õ�‚Òƒ‚Ð„ˆÈƒ†É„„Ìƒ‚Î…�Õ†‚×ˆ‚Ø‹ƒØ�…ÒŒƒÆ‹‚¹‰‚«…›xˆsntjfgSPuRLjWIe`MafO\gI`cFn`FxR?�[M·ZSÆRRÚUZåV\ëX`ö`iótkïof÷qhÑD;ÔA9Å1%È4&ÔC2Ç9%Ç:&È;'Ë=)Î;+Ó:,Ø8,Ù7,Ð,#Ð/%Î6)Ë<,Ç@-Á>*½<'»8$¾5#ÑB2ãOAäN@ØB4Í7)Ë7)Ð>/Ê;+É:*Ç8(È6'È6'Ê6(Î8*Ð8+Ó;.Õ;/Õ9-Ó5*Õ7,Ü;1Ý<2Ú9/ë7:ñ8=÷:Aü8Bü4A÷.>ò,;ï,:í/;é19è38é58í57ñ48ô36ö45î49ï6;í9<é69â45Ý33Ý86ß;9Ü86Þ97á98å99æ89é69ê67ë46ö5:ô5:ñ7:î79ç85ß82Ø7/Ó7+Ð8+Í9+Í:*Ì;*Í:*Í:*Í:(Ï9(Ä: Â: Ã=$Á?%Â@(Ä@+É=.Í81ß<?ÿ[hÿQhÿHhÿ7]ÿ<jü,]ÿ7iì;XéYp§LUX00?<5<E@99;B3:G08F21?9+<E(DW*at=Žœ_²»|®ÌŒ«É‹¥Ä‰œº„Ž¬zy™gf‡PZ|@]‚?a‡>hŽCo•Jr˜Or—Rp”Tn’To“Mk�IgŠFeˆFf‰Gh‹Ki‹Ni‹NfˆKe‡Jd‡GeˆHgŠHh‹Gh‹GfŠDj”Lm—OpšR(0!'/"(-&+-*.0/333775:94==5?@8DE?JLKQQYVWiZ\s]^|YW†[Y‹^]–ee¥nn¸wxÊ€Ú„„äŠŒðŠŒðŠŠì†‡ä‚‚Ü€�Ô‚€Óƒ‚Ò€„Ä�„ÇƒƒÉ„„Î†ƒÒˆƒÕ‹ƒÖŒƒÒŠ€ÇŠ€½‰±…~ €x�wpxkeec^XpZMm[Mi\Kf^Kd_IcaHfbGl`FlR;„UA£^O¿aYÑYXßPTñQ[ÿXbôkcæYRÔD<Î70Ñ7/×;/Ø</Ô;+Ï9(Í:(Í:(Ð:)Ô8)Ù7,Ü5,ß4,Ð/'Ï2)Ì8,Ê>/Å@/Á@-¾=*¼9'Â9)¾0"êVJáJ?Å.#Ñ=1Î</Ç8*Ê;*É:)È9(É8'É6&É6&Ë5&Ì4&Ð7)×;.Ü>2Ü<0Ù7,Û7-â>4éE;øAFó8?ð3:ö4?ö2>ñ-;ï,:í2=ì7@æ5;ã68å78é99ð:9ñ86ò65ï==î<<ê:<æ89á77ß76Ü75Ü75Þ97á98ã99æ::é9;ì9<í9<ï8<÷6;ô5:ñ7:í9:è:9à;5×90Ï7,Ë7+È9)Ç:)Ç:)Ç:)Ç:)È;*È;)Á9!Ä>%½;#µ5»:$ÈE3Í@6Ê0.ÿ^eÿVgÿHcÿ;\ú0Xø/[ý5cÿ<jã\m¯EOo33G6.9C8:E==9:B+3P-4N00D7'CJ)Wo=}›_œ¹v«Å~«ËŒŸ¾‚˜·~”²~‚ nf„RXvBY{?]€>c‡?i�Dn”Im•Ll”Nk’Qj‘RjŽHfŠDc†Bc†Df‰Gh‹Kg‰LdˆJg‹MhŒNg‹Kf‹HeŠEf‹Ej�Im“Jp›Sr�UtŸW*0")/#).'+-(-/.222553782;<4>@5BC;HJGOPTSUaXYm[[s\Z‚^]‰da–kj¦us¼}Ð‡‡á‹‹í�ŒòŒ‹ñ‰‰í…„â€€Ú€~Ò€Ïƒ€Ï…†Æ†‡È‡ˆË‰ˆÎ‹‡ÑŒ†Ð�…ÎŽ„ÉŠ€½‰³†{£‚x‘{s€tknkd^e\SbaLb`Ke^Kh]Ii\Ij^Hk_Gm_EraG{]CŽ[Fª[LÆWPàQS÷PXÿS`ìWQãKFÛ>9×50Ú5/Ý90Ü8,Ø8*Ó8&Ñ8&Ñ8&Ô8)×7)Ü5,à3,ã2,Ë1'Ë4)È9+Æ=-ÄA/Á@-¾=*¾9(Â9)Ë<.åQEÜH<È4(Ì:-È:,Á5&Ê=+Ê=+Ê;*Ì;*Ë:)Î8)Ï7)Ï6(Ó7*Ö8,Ù7,×3)Õ1'Ø1(ß7.å=4ûBHò7>í07ï/:ò0;î.;ì1<ê6?ã6<Ü36×32ß:8îEB÷JFøEAõ?<è:9æ:8å97â96á85à85á98á98à87â88å99ç9:é9;ì9<í8=ì7<ô5:ò59î68ê88æ:8Ý:5Ó91Ë7-Æ8*Ã:*Â:*À;*À;*Á<+Á<+Á<+½9"Á?)¹;$²5¸;'À</É:2Ø<=ÿ]iÿOdÿ@[ü6Yù5[ø:`ö=fô@g¡EJ„>>];2@>/3A05?4E=:X;?T-0X51ZI7bjEu�[Š±pšÄ|žÈ|š¹}š¹€™·ƒ�©yr�`YuESq?\{B_>b†>i�Cm“Fl”Kk“Mh‘Mh�QhŒFeˆDc†Bc†DgŠHiŒLhŒNg‹Mi�Oi�MiŽKgŒGgŒGfŽGj’Im•LnœQo�Rr U-1"-1#,/&,.).0-11/34/45-9;0<>1@B5EH?KMLQRWUTbXWi\Yx^]fcŽpm¢zx¹…‚Ï�Šá��í�ŽñŽŒïŠˆé‡ƒá�~Õ|Í}È�}Ç…‡ÄˆˆÆŠŠÊŒŠËŒŠËŒ‡ÇŒ„À‹‚¹‰€¯†|¡€v‘{p€ujpod`i_Ue\MXeK]bKa_Jh[HmZIp[Hq\Go]EtcItZ?‚V= WDÅYMäTSûNTÿIUß@<Þ<9Ý84ß61á6/á6.Þ6+Ú7(Ö6&Ó8&Ó8&Õ8'Ø6)Ý5,á3,ä1,Ç5(Å6(Â9)Á<+Á@-Á@-À=+À8(Ã5'ÜJ=ÜE:ÕA5Î</Ä6(Ä;+¼7&Æ:)Ç:)Ç:)É:*Ê8)Ë7)Í5(Í3'Ö8-×6,Ö3*×3*Û2+ß6/å:3è=6ò;?í4:ë07î0:ð2<í3>ë7@ê=CÜ7;áAAìNK÷ZUüZUùRLïB>è62à72à74à74ß74à85á96ã;8ä::á77ä88æ89è8;é9<ë8<ì7<ì7<ò38î47ì57ç77â:7Ù:4Ï8/Ç7,Â8+¿:+½;+»<+»<+»<+»<+»<+º9$¾@*³9$°7$¶;+´2%Ã40îOTÿZiÿH`ù8Uó6Vó>]ñFfçHfÞEat?9e?6QA2@C04?.29)>5,O61K*#W:,j\B�ˆ_�«t”½{“Ãy�Ãv•²|œ¸…™µ…€šm\uKHa7Nh9[xB_}?c„?hŒBl’Ej“Gh’Jg�Le�Me‰Cd‡Cc†BeˆFh‹IjŽNk�OjŽNk�Ok�Oi�Mh�Jg�Hi‘Hl•Ip™Ms¡Vt¢Wv¤Y25$13&02'01+12-23.34.46+9;-;>-?B1DF9IJBNNNRQWTR]XVd\Zoda~nl”zw®„�ÄŒ‰Ø‘Žå”‘ì“�íŽ‹æ‰…Ú‚Î{Å|¿‚}¿ƒƒ¿……Á‰ˆÂ�ŠÃ‹ˆ¿‹„¸‡®…}¦…{�€vŽzm~sfmoa`k^Vi[NgZJVdJZbJa_JjZJpYIsYJtZIs]FqY?tU9†T;§ZFÌ\PæRNóEGù:AØ3/Ü41á51ä50ã5.â4+à6)Û8)Ö7$Ó8$Ñ8&Ô9'Ø6)Ý5*à3,ã2,Â8+¿7)»7(¼:*¿=-Â>/Ã;-Ä8+Æ3)ëTKÔ;3Ì8.ÑA6¾4'À<-½>-Ã7&Ä8'Æ9(Ç:)Ê8)Ë7)Ì6(Í3'Ó5*Ô3)Ö2)Û4,ã:3é>7ì?9ë>8è47ì59ï6;î5;ê2:æ39ä7=á<@óUVûc`ÿnjÿidóVQäA<ß61à3/Þ71Þ71Þ71ß82á85â96å97æ::å78æ89è8;é9<ë8<ë8<ë8<ë8<ñ48î68ê67æ87à;7Ö<4Ì9/Å8.½9,º;,¶;+µ<+´<+´<+³;*³;*³:'·@,­8&¬9'±;-«+"Ã54ÿ_gÿSdýE]ó;Uí<XéG_áOdÐP_ÄKZcPAVI8JE2CF1AF0<?*<7#>1B2SE*okHŠ“f•¬t�´t‹¹q‹½t¡¹‰¡¸Š�§}l‚\K_:BV1Lc7Yq?_{@dƒ@i‹Ak‘Di’Fg‘Id�Jb�Lc†Bc†Bd‡CgŠHj�Mk�Om‘Qn’Rj‘Pj‘Nj’Li‘Jg‘Gi“Gm—KqœMu¥Yv¦Zx¨\78(78*66,56056156167/68+;>-=@+@C.DG4IK=NNFQPNSQTVUSYY[a_lki�us›€}´ˆ…ÈŒ‰Ö•’ã”�ä��Þ‹‡Ó„�Æ�}º|µ€{±~¸‚�º‡„»‰…¸Š„²†¨�z›€x�s‡znzrfjm_\j[Tk[NjZKjYI^bK_aKe^Kk[KpZLtZKw\Kz[G{WAƒS=—U?³XFÍSFÝF?å76ê01Û2-ß3/â5/å4.ã2*à2'ß5(Ü9(Ô7$Ð9$Ï:$Ñ:'Ô8)Ù7*Ý5,à3,½>-¹:)µ6%·8'½;+Â=.Ç;.É6,Ñ80ö\T×=5Ë4+ÏA5¸3$·:(¹@-Â9)Ã:*Æ:+È:,Ê;-Ì:-Ï8-Ñ7-Ñ3*Ò1)Ö1+Þ71ç;7ë>:è;7æ74é77ï;<ð<?ê69ä15ã6:èBFìNOÿxwÿqnða[ÛKCÐ83Ñ2.Ü73è?<à93à93ß82à72à72ã75å76å78æ68ç79è8;ë8<ë8<ë8>ê7=ê7=ð69î79ê7:ä::ß=:Ö=7Ë;2Ã;/¸9*´;*±<*¯<)­=)¬<(¬<(¬<(«:(¬=*¤9'¥:*©9-«0)ËAAÿgr÷L^÷E[ðBYèF[ÛN^ÈT]´VW§SQSU@LN9JG4JE1FD-AA'>C#@G%MU.^g<x�TŒ˜f‘¤m�©nŽ²r’¼z µŒ’§€u†dRcC?O2BS3Oa;Vl=b{Be‚@iŠCj�Ei’Fe‘Fb�H`�Ie…Bd‡CgŠFiŒJkŽNl�Pn’Ro“Sj‘Pk’Oj“Mi“Ki“Ik•InšKržOu¥Yv¦Zw§[?>,?=.==1==5=<7;<6;=2;=/?B-@D+CG,GI1KM8NOASPITQLYXDZ[M_^Zgepqo‡{y¡ƒ€·‡…Æ�ŒÓ�‹Õ�ŠÑŠ…Çƒ€¹~z­zw¤{u¡zw°|y°€|®�~©‚~£y•|t‰zrvkqrffm`Zl[QlZNl[KmZKmZIg^Mi]Mi]Mj]Mn]Ms^My^M€[I“`OšWG§N@¹I=Æ@5Ð6.Ù0)á0*á51â5/ã4/â4-à2)ß3'Ü6&Ú;(Ð9$Í;$Ì<$Í<'Ñ:)Õ9*Ù7,Ü5,ºA.´;(¯6#°5#¹:)Â=.É;/Í6-Û>7ùZTåHAÐ90Ì@3¸6&«4 ±>)¿7'¿7'À7'Ã7(Å7)É7*Î7,Ð8-Ù<3Û:2Þ93å<7ê>:ê=9ç85ã41è96ë<9ê::è8:ì>@øORÿccÿqpùheàUPÈ=8¿2+È5.Ö;7à<:â:9à<3á:2á:4á83ã73ä65å55æ68é69é69ê7;ë8<ë8>è7=è7=ç6<ð8:ì8;è8:ã;:Ý>:Ó>7É<2À</´9)°;*¬;)ª;(©<(¦;'¥:&¥:&£<)Ÿ:(Ÿ<)ž:*¡7*´?8ÛTXüdpðK\ñH]ìI\ÝL[ÉRX±WVœ\R�^OAP9FN9NI5K>+>467>O#Jh4g�Tt•\„›c‹™dŽ›f‘¢l•¬t•²x„”pn}\Q`C=J09F,BO3O_;Xi=czDg�BkŠDk‘Dh’Fe‘F`�G`�Gf†Ci‰Fj�Kl�Ml�Ok�Om‘Ql“Rm”Qm”Qm–Pl–Lk—Jm™JržOu¢Qy¬]y¬]x«\CB0DB3DB6EB9CC;CC;BB8AD3CG0EH-GJ-JM0OO7RQ?TREURI[\:\\@\]Kaa_ihvrq�{z¦�~µ†‚¿ˆƒÃˆ„Á„�¸{­ysŸtp•qmŽol£rn¡tq wršwr�toƒskxrilmb^l_Vj\OlZLn[Lo\Kq\Kq\KrZNq[Nn\Nl_Ol`PqaQy_N†[KŸ_S¦OE°A8½:2È5-Ï1(Ø1(Ý5*â70á6/á4-á3*à4(ß5(Ù6%Ô9#Í;"Ê<$È>$Ê>'Í<'Ò;*Õ9,Ø8,·D/±<(¬5!­4!¸9(Ä<.Ì9/Ï5-Ú83ñNIòSMÙB9ÌB5½@.¥2¬?(À;,Á9+À8*À6)Å7+É9.Ï;1Ô;3áD=ãA<ä?;ç>;é=;é;:è88ç77æ93æ95å84é;:ôJJÿ\[ÿdc÷caË=9¿82»4.Ã81ÓB=ÞE@ß=;Ù42â;3â;3â92ä84å84æ66é77é77ê69ë6;ë6;ë8<ë8>è7=è7=ç6<í68ê69æ89à;9Û>9Ñ>6Æ<1¾<.²8)®;)ª;(¦;'¤;&¡;%¡:' 9&ž?-”7%š=,—:)˜3'ÂQKíkmï\fïN^ìI\àHWÎJU·SS¡]RŒfQ‚jP=S<CL7JB/L7$F5FH!Tq;c–Txµo€µo‚¦f~‘Y…ŒX�–cŒ–d|�YXeGGT89E-8A,:C.?I0JX7Wh>g{Fh‚Cl‹Ek‘Di“Gc‘Fa‘G^�Gi‰FlŒIm�Nn‘Ol�OjŽNk�Ok’Qp—Tp™SpšRo›Po›Nq�Nv£Rw¦Uz­^z­^y¬]GD3HE6HF9HE<GG?GG?FF:FG5GI1HK.JM.LO0QQ7SR=VSDWSG[\4Z\7[[C\\Rcbhmk�usšzx©~{´€|·‚¸€|¯zw¢so”mj‰kf„gb˜hd—lf”lh‹lh�leuibij`^g]Th\NjZJl[Io\Ks^Ms^Ms\LzWQvYQp\Ql`PkbQpcR{aPŠ\OžUL§D>±61Á3/Î5/Ö5+Ù7*Û8)ß6/ß4-à3,à4*â6*Þ7'Ø7%Ï7 Ì<"È>"Æ>$Ç?'Ê>'Ï<*Ó:,Õ9,µE/­='¨3¬3 ·8'Å;.Ì9/Ò5.Ò/*ä?;ûYTàI@ÎD7ÆI7¥5®D,ËF7ÉD5ÉA3É?2Í?3ÒB7ÚF<àG?ßB;à>9à;7à74â64ä65ç77é99é>7ç:4ä73è<:ñIHñMLØ=;¹(%¸-(¼5/Å@9ÌC=ÐA;Ö=8Ý>;ã?>á:2á:2â92ä84æ95è96ë99í9:ë7:ë6;ì7<ë8<ë8>è7=ç6<æ7<ì59è58å78ß:8Ù<7Ï<4Ä<0º:-°8(«:(¨;'¤;&¡:'Ÿ:&Ÿ:&ž9%š?,�4"—>,“:*“1&Ì\X÷y|æT_ðTbèI[ØDRÃGO®SPšbS†lS{rSC[C?H3B7%O6"_K0prJ€£iˆÇ€yÃt{¾qu¢]oƒHy}J‡†Xy|O\d5:D)3=$4>&<E2=D2:B+EP2Ve<g{HiƒDl‹Em’Ei“Gd’Ga‘G^�Gk‹HnŽKo’Po’Pl�Oi�MjŽNj‘PsšWsœVs�UržSržQu¡Rw¦U{ªYt§Xs¦Wq¤USJ;SJ;SJ;SJ;SJ;SJ;SJ;SJ;VM>WN?XO@YPAZQB\SD]TE]TEcZKbYJbXNcXRg\Zmacsfmwjs|n{~p}�s€�s€~p}wjtobli\fcb]a`[a^W_\U_[R^ZOa[ObZMe\Kg\Ji\Ii]Gk\El]Fm]Dm]D_gOkiTqZH{M@•RI©WL®TI³WH¦N:¢G2¢?*ª;(¾:.Ò72à23å,1Þ7.Þ7.Þ7.Ü8.Ü8.Û7-Ø6+Ø6+×7+Õ7+Õ7+Õ7+Ô8+Ô8+Ô8+Ô8+¸=.·=.°8(§2!ª2!´;*½>/Â:,Æ6+Í6-Ô:2ÜB8àI>ÖG9Ç;,¹1!ßOGÙIAÔE=ÓE;ØH?ÜG@àC>á<:ã54ê67ï8:í9:ç77à72Ý:3Ü>5ÎKAÈE;½=0µ7)°5&³8)¹>.ÀA2Á;/Ê<2Õ>5ß=8ç;9î79ò67ô68æ7>æ7>æ7<å8:å99å97ã:5ã:3Þ5.ß6/ã81ä84å97ç98ç9:ç9:ë;>ç9;á99Ü<<ÖA=ÌC;ÀB6´@3¦;+¢=+�>,™<*–;(•:'”9&“8%‡F2‡>/†/%”-(ÀIKèkoçlqÊWZ¶OP©TQŸVO˜YP•[P–]R™^Vœ`XMb!:O3JOf x’I˜²h¡½r »t™²pƒ›akN\lEWdHS\GHN@=C9;<,AB4=?2:=2<B6:C2AN4Rc?\tBgƒHp�Ko“Il’Gj’Ij’Kg�Jl�Um‘To“Ul“Pk“Lk”Hl—Hm˜Fp�JoŸIp Jr¢Ns¥Pv§UyªYz«Z{¤jo˜^d�SWN?WN?WN?WN?WN?WN?WN?WN?XO@YPAYPA[RC\SD]TE^UF_VGd[JcZIcYMcYOf[Uj_]nbdpcjrentgpvirvirsfom`ggZacW[\\T\YRYVOWTKXTIXTI\VJ^VIb[Ic[Hf[Gh[Hi]Gj^Fm^Gm^G]eNmhTt]M‚RFšVM­VM²QH¶QE®H9ªC2©>,¯:)½9,Ì70Ø42Þ22Ý6-Þ7.Ü8.Ü8.Û7-Ú8-Ù7,×7+×7+Õ7+Õ7+Ô8+Ô8+Ô8+Ô8+Ò9+¸>/·=.®9(¥2 ¦3 ²:)»=.¿;,Æ:-È4*Ì3+Ó;0ÜE:ßPBÞRCÚQAÝE@Ø@;Ñ<6Ð;5Õ>7Ø=8Û96Ý33é69í68ï79í68é77å97â=9á?:ÆC9¿?2¸:,±6'¯5&²8)¸=-¿@1ÅA4ÍA4×@7ß=8å97ê67ï56ô68ç6<ç6<ç7:æ89æ87å97å95ã:3â92ã:3ã:3ä;6æ:8æ:8å99å99æ9;ä:=à<=Ú?=Ñ@;Å?6¸<2¬;-¥;+ <,œ=+—<)–;(’:&‘8&�7%z;)€8)‰5*ž;5ÁQPÚceÔ]a¹MM­NL¤SO�YP˜\R—^S—^U˜_V™^VSg*Sg(^r3z�O—°l¥¾z™²nˆ¡`j‚Fau@Sf9IY5FP7?H59?358/;<,AB4=?2:=2;A5:C2@M3Rc?]uCgƒHq�Lp”Jm“Hk“Jk“Lh‘Km‘Tn’To“Sm”Qk“Lj”Hl—Hm˜Hp�JnžJp Ls£Ou¦Tx©Xx©Xx©Zm–\b‹QY‚H]TE]TE]TE]TE]TE]TE]TE]TE[RC\SD]TE^UF_VG`WHaXIaXIe]He]Jd[Jd[Le[Qf[Uh]Yh\\i]]j^`k_ak__i]]f[YbWU`USYVMWTKTQHRNCQMBSOCWQCXRB^WG^WEaYFc[Fg\Hi^Hk`Jk`J^cOmhUy_PˆXN¤[T³VQ´HE¸E>¹@7¸>3·<-·9*¼8+Ã9.Ê:/Ï;1Û7-Û7-Û7-Ü8.Ú8-Ù7,Ø8,×7+Õ7+Õ7+Õ7+Ô8+Ô8+Ô8+Ò9+Ò9+º@1¶>.®9(£2 ¢3ª:&µ=,»=.Ä?0Å7+Æ2(Ê3(Ð<0ØF9ÛM?ÝQBÜ87Ø43Ô20Ô52Ù:7à>;å=<é;<ï8<ï5:ì27ê24é56å97á<8à=8¹;-·9+±6'®4%­5%°8(µ<+»=.ÈD7ÏC6ÖB8Ü=7â96è64í55ò67ê5:é6:é69ç79ç77æ95å:3å:3ã:3ä;4ã<6ã<6ã;8â:9á99à88Ý9:Þ;<Û@>ÕA=É>7º:1­7+¥7(¡;,œ=+˜=*”<(’;(�9&�8%Ž7$u8%y6%ˆ9,¢E=ºROÂVT¹OO¬HH¤LHœSL˜ZO—^S–bU—aW˜_V˜]UgxB{ŒU“¦n¥¸€«À‡ž³zz‘YYp:?R$AS)AQ-?L0:C.6<.690581:;+@A3=?29<1;A59B1@M3Qb>_wEi…Js’Nr–Lo•Jm•Lm•Nk”Np”Vq•Uo–Sn–Pl”Kk•Il—HmšIp�Jp�Jp Lu¤Sx©Xyª[u¦Wq¡U_ˆNVEOx>aXIaXIaXIaXIaXIaXIaXIaXI_VG`WH`WHaXIbYJcZKd[Ld[Le]Ff^Gf^Ig_Lg^Of\Pf\Rf\Sh]Wh]Wh^Uh^Ug]Se[QdZNdZN]YNZVKVRFRNBPL@PM>RO@UO?WQAYTA[VC^WDaZGd]Jf`JgaKadSleUt]O‹[Q«b\»YXºDD¾9:Æ;8É:6Ç80Â8-½8)¼:*½@.¾C1Ù7*Ù7*Ú8+Ú8+Ú8+Ø8*Ø8*Õ8)Õ8)Õ8)Ô8)Ô8)Ô8)Ò9)Ò9)Ò9)»A2¶>.¬9'¡4 �2¢8"¬=)µ@.¼>/Á9+Ä6*Ç4*Ë7+Í;.Î</Í>0å26á14Ý02Ý34à88å;<ë=?î;?ï6<í38ì/5é05ç47ã77Û64Õ30±7(°6'®6&¬7&¬7&®9'²:)µ:*ÃA3ËA4ÔA7Ü?8â:7ç85í76ð67í6:í6:í68ë76ê86è94ç:4æ;4â92á:2ß:4à;7Þ:8Ý98Û97Û89Ö<:Õ@<ÓB?ÊA;»;2¯6+¥5'ž7(œ;*—<)“<)‘<(�:&�8$Œ7#Œ6%z@,v5#6'™E;¬OH¬MI©LG¨PL�PH–VL“ZO“_R“bT•aV—aW™`W~‹]™©z­½Ž¦·Š�¡ts†YN`8/A->3B%:F.=F3;A3:=2;<4<=79:*?@2<>19<1:@49B1?L2Pa=`xFj†Kt“Os—Mq—Lo—No—Pm–Pp—Tq˜Up˜Ro—Pm•Ll–Jn™JoœKqžMrŸNt£Sy¨X|«]w§[m�Sd”J[„LS|DNw?cZKcZKcZKcZKcZKcZKcZKcZKcZKcZKd[Ld[Le\Mf]Nf]Nf]Nf_Eg`Fh`IiaLiaNi`Oh_Ng^OjaRi`Qi`Qh_Nh`Mh`Mh`KiaLb_P^[LYVGTQBPM>NK<NK:NK:PM<RO>TQ>VS@YVC\YF^[H^]I`aSf^QmWJ†[R­hcÁb`ÄLMÌ@CÔ:<×79Ö74Î70Á9+·>)²D+°H-×7)×7)Ø8*Ù9+Ù9+Ö9*Ö9*Õ8)Ô8)Ô8)Ô8)Ò9)Ò9)Ò9)Ò9)Ò9)¼A2¶>.«:( 7"™5š7 ¢>&¯B-±<*º;*Â:,È8-Ë8.Î:.Ð<0Ò>2ò5<î3:é27ã36â46â46â46ä15ì5:ì39ê38ê5:æ8:Ü66Ñ2/Ç,(®9(­:(­:(«:(«:(«:(¬9&¯7&¸:+Á<-Í?3Ø?7à=8æ:6ê86ì87ï56î66î66í74ë84ê93ç:3æ;3á:2ß;2Þ=5Ü=9Û=:Ù><Ø=;×==ÌA<ËB<ÆA:»<3­7-£5(ž7(š;)–;)“<)�=(Œ;(Š9&‰8%ˆ7$‡6#}C/s4"y4$“G:¤RG¡NFžNE¡WN˜UL’XL�[NŒ\NŽ^R”`U—aW›bYƒŽd˜¤|�©ƒ€Žj]kJDS42@&$2-:&0;*5=.9?3<?6=>6:;3::29:*>?1;=08;09?38A0>K1Pa=ayGk‡Lu”Pt˜Nr˜Mq™Pq™Ro˜RršSršSršQp˜Om—Km˜Ip›LržOt Qv¢Sx§Y{©^z¨_qŸVd’JY‡?]†NVGQzBe\Me\Me\Me\Me\Me\Me\Me\Me\Mf]Nf]Nf]Ng^Og^Oh_Ph_Pg`Fh`IiaJjbMjbMjbOjbOjbOjbOiaNh`Kh`Ih`IhaGibHjcGe`Mb]J^XHXRBSM=MJ9KH7IH6KJ8LK9LM;NO=PQ?QTASVESVEYYM]WKcQEzXN¡ha¸eaÇUUÛORÞ=Cã8>à67Õ62È:.¹@+­E*¦I*Ô7(Ô7(Õ8)Ö9*Ö9*Õ9*Õ9*Ô8)Ô8)Ò9)Ò9)Ò9)Ò9)Ò9)Ò9)Ñ:)¼@4µ=/«<+ :$—7’6š<#¦B*°C.¹@/¿;,Ã7*Å2(Ë4+Ó:2Ù@8ó1<ð2<î5=ë8>ç:>å;>ä:=ã9<á48ä5:å8<ä;>Þ;<Ò86Å1-¼-'«<+«=,«>*©>*¨=)©<(©:'«8%¯6%¹7)Å;.Ñ=3Ù<5à;7ä;8è;7ð75ï75ï75î84ì94é;4è;4å=4â>5à?7ÞA:ÚA;ÙA>ÕA?Ñ??Ñ??¾B:»@8µ<3ª8-¡5(›5'˜8(•<*‘;*�<)Š<(‡:&†9'„7%ƒ6$‚5#y<)r3!}:*—OA£YLœRG•OE–VJ”ZN�[MŒ[M‹[OŽ\Q”^T™`Yœa[s}Xyƒ`r|ZU`B9F,/;'0;+1;03=44;35<4:?8?B9?A6<<277+89)>?1:</7:/8>27@/=J0O`<ayGk‡Lu”Pu™Os™Nq™PršSp™Sr›OrœPq›Oo™Mn™Jp›LsžOu¡Ry¥X{§Z|¨]x¦]qŸWg”O]ŠEVƒ@`‡PY€ISzCg^Og^Og^Og^Og^Og^Og^Og^Og^Og^Og^Oh_Ph_Ph_Ph_Pi`QjbOjbOjbOjbOiaNiaNiaNiaNiaLh`Kh`Ih`IhaGhaEhaEhaEf_Le^Kb[H\WDWR?PM:LI6IH6GH6GH8GJ9GK:HL;IM>HO?HO?PPDVRGYOChRE�YM˜UL³RLØXWàGJç<Bå79Ý54Ñ:1¿@-°D*¥D$Ò6'Ó7(Ô8)Ó:*Ó:*Ó:*Ó:*Ó:*Ò9)Ò9)Ò9)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)½?3¶</¬=,£<)—9 �6”:  B)¬C-¶A/¿=/Â6)Â/%È/'Ð6.Ú=6ð0;ð5>ï:Aì?CæBCáACÞ@AÚ>?Ï12Ñ56Ô::Ò<;Ê;7¾73µ4.¯3+¥>+¥>+¥>+¦?,¥>+¤>(¥<'¨;'ª7$²7'¼8+Å8.Ì8.Ö92Þ<7ä?;î85î85î84ì94ë:4è;4å=4â>4âA7ÝC9ÚC<ÕB;ÐA=Ê?<Ç=;Ã<9®>3©:/¢8+œ6(˜7'”8)‘:)Œ;(‹=)ˆ=*…<)ƒ:'‚9&€7&6%~5$v4$x5%…B2˜UEœXK“QC�PD•ZL’ZM�[NŽ]OŽ\Q’\R•\U˜[V™\W`hCX_=JS4>G,6?*2=-4>35?74=88>:=B<CF?EG<CC7@>/;9*78(=>0:</7:/8>26?.=J0N_;`xFk‡Lu”Pu™Os™NršQršSp™SqœMr�NqœMp›LošKr�Nu¡Ry¥X«`~©az¥]qœUf‘L_‰G[ˆE\‰Hb‰RY€ISzCh_Ph_Ph_Ph_Ph_Ph_Ph_Ph_Pg^Oh_Ph_Ph_Ph_Ph_Pi`Qi`QmcWlbVjaRi`Qh_Pg^Og^Mh_NiaNiaLiaLiaJh`IhaGhaGhaGh`Kg_Je_Ib[H\WCUR?PM:ML:EF4DG6DH7BI9BI9BJ;BJ;BJ;JJ@QQERPAUN<bM:qF6“I>ÄYSÛQOãCEå8:ß55×:3Ê>/¸>)¬<$Ï8'Ï8'Ð9(Ò;*Ò;*Ò;*Ò;*Ò;*Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)Ñ:)½=2¶:.­<,¥>+˜9#Œ5�9ž@' :$¯<)¾?0È;1Ì8.Ñ7/Ù<5àA;ð;Bï>FëBGãCEÖ@?Ê;7À50»1.·0,¼51¾:5»<6³:2©9.£9,¡9,Ÿ>+Ÿ>+ ?,¡@-¡@-¡A+£>*¤=*©<(­:(²7(¹5)Á4*Ë80Ö?8ÝD>é:5é:5è;4è;4ç<4ä=4á?4Þ@5ÝC9ØD:ÒC;ÊA9Ä?:¼;6¸85´73ž9-™7*•5'’6'‘:)�<*‰:)„9&†=*„=+�=*€<)~:'|7'{6&{6&y1#€8*ŒG8–RE’PB‹K?ŽSE™_S�XK�ZN’\R–]T—\V˜[V˜YT—XSV^7EM(6@8A&>G2<D53=2-7/1737>7@E>GJ?GI;BC1?>);;#78(=>09;.69.8>26?.<I/N_;`xFj†Ku”Pt˜Ns™NršQršSp™SqœJqœLp�LoœKo›LržOw£V{§\‚­e€«dx£^j•P]‡EYƒC^ˆHe�OcŠUZ�LSzEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qj_Yj_Yj`Wj`Wj`Vj`Vj`TjaRjaPjaPjbOjbOjbOjbMjbMjbMg_Jg_Jf^Ie_Ib]I\WCSP=ML:HI7EH7AE6>E5>F7?G8=H8<G7HJ=HL>AE4HK6YS;_F0€K9Àj]Ýf`åSSçDEè@@ã?=Ö=5É=0Â>/É3$Ë5&Ì6'Í7(Í7(Î8)Ñ;,Ó=.Ò<-Ò<-Ò<-Ò<-Ñ;,Ñ;,Ñ;,Ñ;,¸3,·7.±;-¦;)˜8"‘7’8š:"«B-±<+¹7)Á4*Í6/×<7âC?êHCëBGéDHÝCCÉ:6»61´80®8.§5+ª:/¨9.¤8. 8-›9,–:+’<+�>-˜=*˜=*™>+š?,›@-œA.žB-¡@-¡<*¥:(«7(°6)¶6+¾8-Å;1Ê=4ß:4á<6â?6ã@7âA7ßA6Ú@4×@5ÚG=ÒE;ÇA6»;2±6.ª3-¤1,¢1+”;-’:,�:+�:*‰:)ˆ;)…<+„=+~:'|9(|9({:({:(z9'x6&w4$z, �A4˜NC“MAŽL>�RE‘VHŽRG˜\R˜\R‘UM�TL™ZU—XS–WR `^R[0IQ(AK&BK,>H/7@-2=-4>34;3HPEX^RW[LLO<DF.AA'==!:;+>?1;=0:=29?34=,;H.Pa=bzHlˆMu”Ps—Mq—Lp˜OršSqšTp�JqžKrŸLrŸNsŸPv¢U{§\ªb‚­fx£^i”O_‰G]‡G`ŠJfŽOh�Rd‰U[€LTyEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qj^^j_]j_]j_[j_Yj`Wj`Vj`Vj`TjaRjaRjaRjaRjaRjaRjaRj_Kh`Kg_Jg_Jd]J^YEUR?ON<IJ8EH7AE6>E5?E7>F7>F7=E6BF8>E5=F1DN5HK0PB'yS<¹ubÉdXà_YíUTêFGä>>â@=Û>9Ñ82Ì:+Î<-Ï=.Ð<.Ï;-Î:,Í9+Í9+Î:,Î:,Î:,Ð:,Ð:,Ð:,Ð:,Ð:,È?9ÆA:½A7®=/�6#•2•2™3¦5#²7(Á;0ÑA8ÞE?æIDéJFìJGÞBCÛEDÎC@¼;5®9/¨>1¢A1œ?.œ@1™@0–>0’?/Œ?-ˆ?.„A.ƒB.‘;*‘;*’<+“=,”?+”?+–?,™>+Ÿ@.¡=-¤:,§9*¬8+±8-¶:0¹:1Ð90Ò;2Õ>5ÕA7×C7ÖD7ÔD9ÑE8ÊB6ÃA4¹=1°:0¨8-¢5.�5,œ5.Ž=,Œ=,Š;,ˆ;+†:*„;*�<,€=,~;*|;)y:)y:)x9(w8'u6't5&„1)‘C9˜NC‘K?ŒJ>�PD’TI�RG“SJšWQ˜UO™UR�\X”WTŽSO—\XT]0Zc8_j@[eBIT66C)4@*<G6MXGYbQ_fTW\FJN5BE*?@!<=9:*=>0:</9<1:@45>-;H.Pa=c{IlˆMu”Pt˜Nq—Lq™PršSqšTq¡Kp Lp�JqžMt Qx¤W|§_ªc{¦aošUcŒJ]…Fa‰Je�Ne�Nc‹Ld‰U[€LTyEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`Qj^`j^`j^^j_]j_[j_Yj`Wj`Vj`Vj`Tj`Tj`Tj`Tj`Vj`Vj`VlaMk`LiaLiaNf_La\I[VCTQ@ML:HI9DG6AE6AE6?E7>D6=C5=F57@-?H3EM5AA%QA'�]E³u`³WHÙbZðebîRSéEFìFHèBDÝ79È9+É:,É:,É:,É:,Ê8+È6)È6)Ê8+Ë7+Ë7+Ë7+Ë7+Ì8,Ì8,Î7,Â3/¾5/¸5-¬3( 0"›0Ÿ1 ¥4$»A2ÇC7ÖG?ãKFçLGéJFåFBâC?ÕCCÏDAÁ@:°;1£=/žC1™F4•G3’E3�E2ŒC2‰B0ƒB0B/{B.xD.Š8*‹9+‰:)Š;*‹<+�<+Ž=,�<*–?.–=-›;+�9* 8+¥9-©:/«;/¼7.¾90Á;0Ä>3Å?3Æ@4Ä@3ÁA4¸:,²:,ª9+£7+�7+™7,–8.–91‰=-ˆ<,…<+„;,‚:+€;+<+<,};+z;*z;,w9*v8)u7(t6's5&Œ91”F<—MBŽJ?ˆH<�OD‘SH”QI“NGšSOšSOšVSœ]X“YU�ZT—f_wƒS~Š\€‹`lxPJX46D#=J.MZ@eqYeoW\fMNW<DJ.?D&=@!:=89);<.8:-9<1;A56?.<I/Pa=c{Im‰Nv•Qt˜Nr˜Mq™PršSp™Ss£Mp Ln�LpŸOu¤V{§\}¨`|§bošUf�M\„E\„EdŒMh�Qe�N_†GcˆUZLSxEi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`QjaRjaRjaRjaRjaRjaRjaRjaRk_ak__k__k`^k`\kaXkaWkaWkaUkaUkaUkaWkaWkaWkaXkaXncQmbPjbOjbOhaNe^L_ZGYVERO>MK<GH8DF8CE7AE6@D5>B3;I27C-EJ3IG0K<%mN9—dO§`NŸA5ÆSLçc_ð^^îRUíJMêDHç>CÉ;/Ç9-Å7+Å7+Ç9-Ê:/Ë;0Ë;0Ñ>4Ñ>4Ñ>4Ò>4Ó?5Ó?5Ó?5Ó?5Ó?=ÑB>ÍD>ÆF=ÁG<ÂI>ÆN@ÎPDÙSJÞOGäLGäIEåFCâC?àA=ß@<ÔFDÊC?º?7«<1ž>.—D2“H3‘J6‹G4ŠF3‡D3„C1B0zA.wC.uB/†8+…9+…9+†:,†:,‡;-‡;+ˆ;+‰:+‹:)Ž8)�8*•9,™<-�=/ž>0«9/­8.®9/°:.°:.²:,¯9+®8*¨7)¥7*ž7(›6*•7+’8-�9/�;0†=.…<-ƒ;,�9*:+~9*}:*};-|:,z;,y;,w9,s8*q6(q7)q7)�B8”G=‘K?ŠH<‡I<‹OD“UJ—TL—PL�SP˜QO–RO—\X�_X�h^žzn�™k…’fu‚VYh=CR)?O(P`<crQetS\iKNY;CL/?E)>B'=A&;>#78(:;-79,9<1;A57@/<I/O`<ayGlˆMv•Qu™Os™NršQršSp™Sq¡MoŸKožMs¢Rz¨]|ªaz¥^u [bŒJ^†G[ƒD_‡HgŽMj‘Pf�L`‡Fb‡TY~KRwDi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`QjaRjaRjaRjaRjaRjaRjaRjaRk`^k`^k`\k`ZkaXkaWkaUkbSkbSkbSkbSkaUkaWkaWkaXkaXocSnbRmaQkbQkbQhaOd]M`ZJVSBRO>MK<IG8EF6DE5BC3@A19K1>H/JH1Q?+e>-”ZL¬`S›>6œ4+µ@9ØXUóigödeëRUèINìKQ×J@ÓF<Í@6Ë>4Í@6ÒD:ÕG=×G>ÚJAÚJAÝJBÝJBÞKCßJCàKDàKDëRTéSTãTPÜSMØSLØSLÛTNàUNàLHâHFäEBäB@äB@äB@ãEBãEBØJHËD@¹>7ª>2žA2–C1�F3�I6‰F3‡D3†C3ƒ@0@1}?0y@/x@1ƒ9.ƒ9.‚:.‚:.ƒ;/ƒ;-ƒ;-ƒ;-�9*‚9*…9+‡9,‰:+�;-�<.�=/›;/œ:/ž9- :.¡9,¢8*¢8*¢8*Ÿ8)œ8)˜8(”8)�9*Œ:,ˆ:-‡;-ƒ;-‚:,�9+~9*}8)}7+|8+{9+z8*y9-x:-t9+q5*o5)q7+r:-�G;ŽH<‰I=„I;…K=ŒRF“WMšWO˜QMžTQ™RP•VQ’`YˆbW‚h[ŠwhivKZi>JY.AR&IZ0Wi?dvLj|TXjDL\8?M,:D)<D,>C-=@-:=*89):;-68+8;0<B67@/;H.L]9^vDi…Jt“Ot˜Ns™NršQs›TqšTmŸJmžLp¡Px§Y|ª_z¨`r�Xi“QYƒC\„E`ˆIeŒKgŽMgŽKf�Jd‹Hc…SY{IRtBi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`QkbSkbSkbSkbSkbSkbSkbSkbSla[lbYlbYlbXlcTlcRldQldQldQldQlcRlcTlbVlbXlbXlbYocSnbRmaQlcTlcTkbSg`Pd]M]WGYSCSM=MJ9KH7HE6DB3B@16J.>H-NC-b=-„D:¯VP¶MJ¡++´:9º=;ÑTPòpnýwvñehêY^ò]cáVOÚOHÒG@ÎC<ÑD=ÔG@ÖGAÖGAÙHCÚIDÚIDÝIEÞJFÞJFàKGàKGãGJáGIÝGHÙGG×HD×HDØGDÝEBàBAåABé@CêBBèBBäB@ßA>ÜA=ÚJIÌB@»<6®>3¢@3—A2�B0�D3‰A2ˆ@2ˆ>1…=1‚<2€<1=1}=1ƒ:3�;3�;1�;1€<1€<1=/=/=/€</€=-€;,€;,�9+�9+�8)Œ:/�9.�9/“;/—;.š=.�=/ž>.™9)•9*“:*Ž;+Š;,‡;+ƒ;,€;+‚:,�9+7)~6*{5){5)z6)z6+x6*x8,w9.s7,o5)o5)r:-u=0ŽL>‰K>„J<‚M=…QC‹VH’XM—WN”MIœRQšTR•[W�e\y_PcXFb]IBP,?M)?O(K\2_qGk~QcyKVk@M_7@R,6E&7D*=F1=D4:=27:19:*:;-68+8;0<B67@/9F,IZ6Zr@e�Fr‘Ms—Mr˜MršQs›TqšTl�Ko Os¤Ux¨\z¨_s [i“Q`ŠJX‚B^†GdŒMgŽMf�JeŒIgŒGh�HaƒQXzHQsAi`Qi`Qi`Qi`Qi`Qi`Qi`Qi`QkbSkbSkbSkbSkbSkbSkbSkbSlbXlbVlcTlcRldQldOldMldMldMldMldOldQlcRlcTlbVlbXocUmaSkbSlcTmdUlcTi`Qf_Ob[K^WGWQARL<OI9LF6IC3F@02K+>G*SA+{E9¦NL¸EH»5<¾19Ë@EÄ?@ÊJIÞb`îrpïopçbeáZ^ÛRJÕLDÏD=ÍB;ÏD=ÒE>ÐC<Î?9ÒC=ÓB=ÔC>×C?×C?ØD@ÙEAÚEAà?Dß@DÞDFßFHßIHàJIãIIæFHçACëADîAEîACéAAâ@>Ù>:Ö=8ÛEGË=<»73°;4¦@4˜?1�>0ŽA1‰=/Š<0‰;1‰92‡81†93…:4„;4�:4�:4€<3€<3<3}=3}=3|<0{=0{=0{=.{<-z;,y:+z8*z8*€:0‚:.„:-ˆ:.Œ:.‘;.”<.–=-’9)‘:)�:*Š;*‡;+ƒ;,<+}<*€8,€8,~6*}5)|4(z4(z4*y5*u3'v6,v8-r6+n4(n5*s:/v@4‹PB†N?�N=�R@…VF‰XIŽUJ‘RI“NI™RP”SO‘\VŠfZl\LML7BL3@O.KZ9WgC`rJezOdzLVl=G]/AV+7I#0A!5C*=F5<D98=7796:;+;<.68+9<1=C77@/7D*FW3Um;a}BoŽJq•Kr˜MršQtœUr›UnŸNq¢Qu¦Wv¦\s¡Yj—R`�J[…E^†G`ˆIbŠKeŒKf�Jh�Hf‹EeŠD`‚PWyGPr@i`Qi`Qi`Qi`Qi`Qi`Qi`Qi`QkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcRldQldOldMleKleIleIleKldMldOlcRlcTlbVlbVnbTmaSkbSkbSmdUlcTjaRh_Pd]M`YIZSCUN>QJ:MG7IC3GA13M*>G*[B.�PGºVVº7?»'3ÜBNÐ:CÄ9>»;:ÂHGÓ][ßgf×[]ÇILÓJDÏF@ÌC=ÎC>ÒGBÒGBÐB>Ë=9ÒC?ÓB?ÔC@ÕDAØDBÙECÙECÚFDá>Cà?DÞBEßEGáGGàFFàBCâ=AëADí>Cì;Aê<>æ>>ãA?ßD@ßFAÙ@CÉ78¹30±:4§?4š>1�=/Ž?2Š;.‹9.‹80‹61Š71Š73‰84‰:5:3:3:3~;3|<3|<2{=2{=2u9.v;-w<.w<.x=-x=-y;,y;,{;1};/~8,�7*„6)‡5'‰6(‹5&�7(‹8(‹:)ˆ;)…<+�<,~=+{<*€8,7+~6*|4(|4({2)y3)y5*t1(u5+v8-r6+n4)n5*t;0xB6ŒTE„Q@P>‚UB„YHˆYI‰SG�NG˜SN˜RP�PKˆVO‚bUeZHFK4;K0IX;[jKgxVewQYnCSi;Me5I`28M"-B*;2@):E7;B;8<;7;<<=-<=/79,9<1=C77@/6C)DU1Rj8_{@mŒHp”Jq—LršQtœUr›Uq¢Qt¥Vu¥Ys£Ym›Sd‘N\‰HZ„DdŒNa‰J`‡HcŠIf�JiŽIeŠDa‡>`‚PWyGPr@i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTo\Nq_QtdUrdWnbTj`Th`ShbTgaSebQa^K[VBVQ;TN6NH.GA'RD)N=#cI2�iV²zm·ng³[W¸PQ¶BEÁ@EÉ@GÑBFÖDGÚEIÜGIÝGIÔBEÔBE×BDÙEEØDBÒC;ÎD:ÌH;ÄF7ÃH9ÆH:ÊG?ÐEB×BDÜ?FÞ=EâBDâBDâBDâDEâDEãEDãEDãEDâDAâC@áB?â@>ã?=ã?=ã?=å@>ÎE?Ä?8¶:2©80Ÿ:0•>4Œ@3ƒ?2A4|@5}?4<3ƒ:3‡83Š73Œ72…<-…<-…<-„;,ƒ;-‚:,‚:,‚:,9-9-9-~:/~:/~:/~:/~:/~80~80}90}90}90}90|90|90|90|90z:0y9/y9/x8.w9.w9.w8/w8/v7.t8.s7-r6,q5+p6+l2'q7,m4)l3(o6+m4)q8-�H=�ULƒTL†QK‹PJ�NJ•NL˜NM—PL”SM‹UK†\NdOkaFTW8JX5N_;g�T`zMWpFTkARg@O`<IX7DQ39C*5=&49%7:)=>0CA4B@4@<12:/2:/4:.5;-9=.<?.>A,>D*T^<bqHq…Tt�Vt”UršSs�SržQv�^¦g¦gq˜YcŠK_†G_†G^…F`‡Hb‰Jd‹Lf�NeŒMcŠK`‡H^…F_�OTvDKm;i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTsaSr`RrbUqcVrfZpfZmeZjdXgdUkhYmjYlgThcOd^H[U=RL4PJ0F?%P@)kP;�WG„NB‰D=–C?´VT»SR¾PQÂNOÄLMÆLKÅKHÆJHÔRTËFGÄ<<Ç;:ÑA@ÔE?ÏB9Ç>4ÉE9ÈF9ÊG=ÍG>ÒGDØCEÜAEß?GáCDáCDáCDâDEâDEáFDáFDáFDàEAáC@àB?ßA>àA=àA=â@=ãA>ÑFAÉB<¼=6¬:0 90“;/‰=0�=0A4|@5}?4<3ƒ:3†91Š71Œ72…<-…<-„;,„;,ƒ;-‚:,‚:,‚:,9-9-9-~:/~:/~:/~:/~:/}90}90}90}90}90}90|90|90|90z:0z:0y9/y9/x:/w9.w9.w8/w8/t8.s7-r6,r6,p6+p6+k1&q7,m4)l3(o6+l3(p7,~H<‚SK„TJˆQJ‹PJ‘PL•OM–PN–RO‹OG…SH€[K{ePsiPhkLdrOgxT\uKXoEPf?Ka:K_:K\:GV7CP4<F-8@)6;'7:)<=/?@2@>2><03;03;05;/6<09=/<?.>A,>D*Q[9^mDm�PpŒRr’Sq™Rs�SsŸRxža|¢exžak‘T`†I]ƒF]ƒF\‚E`†Ia‡Jc‰Le‹NdŠMbˆK`†I^„G]MRtBIk9i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTtbTo_Pm]Pm_ToeYog\keYhbVfbVpl`{xi~{jzgzuapiVf`JPV<DF.A?(MB.S@/U8(^6*m=3p7.x71:3‰@9•HBžOH¦WPª\RÁ[W»RO¸FE½A?ÉCBÑFCÓD@Ð?:ÐA9ÐC:ÐE>ÔG@ÖGCÚFFÛEFÝDGáCDßCDßCDßCDàDEßECßECßECÞDBÞE@ÝD?ÜC>ÜC=ÜC=ÝB=ÝB=ÕF@ÎE=ÃC:³>5¢:/’8-ˆ9,�<-€A2~@3}?2=1ƒ:1†91ˆ81‹80…<-„;,„;,„;,‚:,‚:,‚:,€:.9-9-9-~:/~:/~:/~:/~:/}90}90}90}90|90{8/{8/{8/{;1{;1z:0y;0x:/x:/x:/x:/t8.t8.s7-s7-r6,q5+o5*o5*k1&o6+m4)k2'n5*i3'm7+}G;†QI‡PIŠQJŽQL‘RM“RN•TP’UP�VO‡[P^OtbNoiQnrWjwYfwWPf@K_:EY6BV3EV6GV7FU8ER8?I1<D-9>*7;*:<.<>0<=/:;-5<45<46<26<09=/<>0=@-=C)MV7Zi@h|KlˆNp�Oq™RuŸSt Sz cw�`n”Wc‰L\‚E\‚E\‚EZ€C_…Ha‡JbˆKdŠMc‰La‡J_…H]ƒF[}KPr@Gi7i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTtdWqaTm_Rk_SkaWlcZle[jf]jf]wuiˆ„y‘��•��’Œ|‰‚r€ygZfNLV>AI2CF1ED0D?,I=-TD5M:+O8*R6*T7)X8+];/a?3eA5‹KAœSL­UQ¶NK½EDÇABÓCCÛEF×?>Ø@=×B>ØD@ÙEAÚFDÛEDÛEDßCDßCDÞDDÞDDÞDDÝEDÝEBÜGCÛFBÚE?ØE>ØE>×D=×D=ØE=ØE=ÖC<ÔE?ÊE>»@8§;/–8,‹9+…;.‚@2@1~?0=/�;/„:/‡9/‰90„;,„;,ƒ;-‚:,‚:,‚:,�9+9-9-9-~:/~:/~:/~:/~:/~:/}90|90|90{8/{8/{8/y9/x8.{;1y;0y;0y;0x:/x:/v:/v:/s7-s7-s7-r6,p6+o5*o5*n4)j1&o6+l3(h2&k5)h2&l6*|F:ŠOGŒPH�QI�RM�SN’UP�WPŽYQ‰]R…aUy_PiZGd_IciOZgKN]@EU8AQ4=M0<K.?M3CQ7FR:GS;BK6>G2:A/7>,9=,9=.8<-7;,6=66=66;46<29<1;=/<?,<A*JS4Ve>dxGj†Lp�Os›Tw¡Uw£T{¡dr˜[e‹N\‚EZ€C\‚E\‚EZ€C_…H`†Ia‡JbˆKa‡J`†I^„G]ƒFY{INp>Ef7i`Qi`Qi`QjaRjaRkbSkbSkbSjaRjaRjaRjaRjaRjaRjaRjaRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTseXugZsg[mcYjaXle]snhzwp�~w��† �–©¥œ«§œª£™£�‘œ”‰v~i`hSLSADK9AJ7>G4>G4BI7GN<FJ9CF5?@0=;,<:+<9*<9*U5(lD8‹PHŸPL°HIÂEIÏDIÖAEÙ>BÛ?@ÛAAÛC@ÚEAÚEAÚEAÚEAÞDFÞDFÞDFÞDDÝEDÝEDÛEDÙEAÚFB×FAÕF>ÔE=ÓF=ÓF=ÓF=ÔG>×@9ÕB;ÏD=ÁB9®>3œ:-‘;.‰=/„?0�?/~?0=/�<-„:-†:-ˆ:.ƒ;-ƒ;-‚:,‚:,‚:,�9+9-9-9-~:/~:/~:/~:/}:1}:1}:1|90|90|90{8/y9/x8.x8.v8-y;0y;0x:/v:/v:/u9.u9.u9.s7/r6.q6.p5-o4,n3+m4+m4+j1(o6-j4*h2(j4*g1'k5+zF;�MG�NH‘PJ’SL�UOŽWPŠZP…ZQ{YMv\OkZJ]UBYXDY^HOYA>L3;G18D.5A+5A+8D.=I3AM7EN;BK8?H5<E29B/7@/7>.5<,4;+5;75<56;56;48;2:</;>-;@)GP1Ra:buGi…Kq‘Pu�Vy£Wx¤Uz�cn‘W`ƒIZ}C[~D^�G^�G]€F`ƒIa„Jb…Kb…Ka„J`ƒI_‚H^�GW{KLp@Bf6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTmaUndXpf\lcZkd\rmg„�|‘�‹¥¤ ³²®ÄÁ¼ÉÆÁÉÄ¾ÅÀºÀ¹±¹²ª¤œ�ˆ‚tfcTPQAEI8=F38E18G45F35F44E36D58D6;E:?G<@H=<6(L</b@7EA£OOÁW[ÎOVÍBI×DJÚDFÝDFÝEBÝEBÞE@ÝD?ÞC?ÞDFÞDFÞDFÞDFÜDCÜDCÚDCÙECÙEA×FAÕF@ÓF=ÐF<ÏF<ÐG=ÐG=Ø=8×@9ÑB:ÆC9¶A7¤>0–=/Œ=.†>/‚?/€>.=-�<-ƒ;,„;,‡;-‚:,‚:,‚:,‚:,�9+9-9-~8,~:/~:/~:/~:/}:1}:1}:1}:1z:1z:1y90y90x8/v7.v7.v7.u9/u9/u9/s9.s9.s9.r8-r8-q6.q6.p5-o4,n3+m4+l3*l3*h2(l6,i3)f2'h4)e1&i5*xD9’KE’MF“PJ�TL�VO‡XN�YO|\Os\Nk[L_XFUTBPS@JQ?@I64@,3<+2;*09(09(2;*5>-9B1<E4?H7=H7<G6:E48C25A-3?+1=)3973954954937:19;0;>-;@*CL/O^7_rDi„Mr’SwŸXy£Wv¢Us–\f‰OZ}CX{A\E]€F]€F^�G`ƒI`ƒI`ƒI`ƒI`ƒI_‚H^�G]€FVzLJn@Ae7haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcTiaVjbWkdZmf^upjˆ…€Ÿžš°°®ÂÂÀÓÒÐâáßéåäçãàãÞÚÞÖÓ×ÏÌÒº°º¤™˜†zym__YIKL:>F19E1<K8;J79G68D68@57<57947836A3>>2J91`94ˆHH²\_È_dÍVZÐOSÕMOÚLKÜJJàHEáFBãDAåA?ÞDFÞDFÞDFÝCEÝCEÜBBÛCBÛCBÚDCØD@ÔE?ÓF?ÐF<ÏF<ÐG=ÎH=Ý>8Ú?:ÒB9ÉC:¼C8«A4™<-Œ9)‡>-ƒ>.�>-€=,€=,�<,ƒ;,…<-‚:,‚:,‚:,�9+9-9-~8,}9.~:/~:/~:/}:1}:1}:1}:1}:1y:1y:1x90x90w8/t8.s7-s7-s9.s9.r8-r8-q8-p7,p7,p7,p5-o6-n5,n5,m4+l3*i3)i3)g1'k7,h4)e1&h4)d0%f4)uC8•JE“LH“PJ�TL‰WN�YOx[Mp]Nj^N]WGPQAKN=CJ:9B12:+08)36-17-06,/5+/5)17+2:-4<-9D4;F6=H7<I7:G56C/3@,1>*0640641622716929;0:<.:?)?H+KY5]pChƒLs“TwŸYw¡WržQiŒT^�IUx@WzB[~F[~F[~F]€H_‚J_‚J_‚J_‚J^�I^�I]€H]€HUvKJk@@a6haQhaQhaQibRibRjcSjcSjcSibRibRibRibRibRibRibRibRkbSkbSkbSkbSkbSkbSkbSkbSlcTlcTlcTlcTlcTlcTlcTlcToh^ng_lh_tqj…„¡ ž¼¼ºÏÏÏÎÏÑààâòòòúøùû÷öøòòñìéêåâïÍÃàÀµÅ©�¥��€sbaZGML7CH2AI4AH6BF7BD7C@9D<9C98C772?5;@9@93H/+c76�QR³giÇmmÂ[\ÉYWÑUS×QNÝKKåGFèBBê@AÞCGÞDFÞDFÞBEÞBEÝADÜBBÜBBÜDCÙCB×C?ÔC>ÒE>ÐE>ÏF<ÐG=â@;Ý@9Õ@9ÌC9ÀD:°B5›;-‹5&Š=-…=.�>-€=,€=,�<,ƒ<*„=+‚:,‚:,€:.9-9-~8,}9.}9.~:/~:/}:1}:1}:1}:1}:1{;2w;1w;1v:0u9/t8.s9.r8-q7,r8-q8-p7,p7,n8,m7+m7+m7+o6-o6-n5,m4+j4*j4*i3)h4)f2'k7,h4)c1&e3(b0%e3(uC8”JG“NI�QJ‹TM„XOzZMq[Mh\LXUDHK:=D4=E69A208+/7*5=056157257247005.06,08-19,6A3:E5=J9>K9;J77F12A,0?*.42.420511605818:/:<.:?+<E*IW4[nAg‚Mr‘Uv�ZuŸWo›Pb…MX{CSv>WzB[~FY|DY|D\G_‚J_‚J^�I^�I^�I]€H]€H]€HSsJHh?>^5icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUfc\gd]vsn“’Ž¯¯­ÄÆÅÚÛÝìíïóôöö÷ùüüþÿÿÿÿþÿÿûúüööùôñÿÞÏöÖÇãÈ·É´Ÿ­ž‡ŠƒicbFGG-EG/DF0GD3IC5H;3F42G34M797@;;@:@;8G85cGF‘kjÅ”�è­©Ò‹‡ÇtnÀ]XÆSNÖNNâIKëEIðCGÜFHáHKÜCFÕ:>Ø>@âFIàDGÖ:;Ú@@Ú@@ÙA@ÖB>ÔC>ÑB<ÏB;ÏB;ãA<Ý@9Ô?8ËA7¾B8°@4�;.�8*‹>.†>/‚?.�>-€=,<+�=*�=*9-9-9-~8,~8,|8-|8-|8-}9.|90|90|90z:1z:1z:1z:1x=5w<4v;3u:2t91r7/p7.p7.o6-m7-m7-m7-m7-l8-l8-l8-i2+m6/p92o81k4-g2*g2*h3+e0(i7.d2)^,#`0&_/%b2(p@6’LJ�OKŠQJ‚QJ}YMv_QfYIRO>CF5=F58C35@02=/3;04:04:077577566446135016/05..6+.9+2=/6C29H5:I68G42D./A+,20,2.-2..3-36/780:</:?+6>&DR1YkCh‚Ru”[wž_r›Wj•N\}HXyDTu@Tu@WxCZ{F[|GZ{F^JbƒNbƒN^J\}H_€K`�L^JTrNFd@:X4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUmdUed_onj…†�¤¤¢ÁÃÂÖÚÛêîï÷ûþ÷ûþøüÿüýÿþþþÿþÿÿýüÿüùÿûøÿïÚüêÒîÞÅØÍ±À»�¤£„‚ƒcgkJMP1II/EC,HA/J>2L93M85Q99;;9BA?MHE\RQyjg¢�‹Ì³®åÇ¿ÿÙÏê´ªÌƒ|Àc\ÌVTÛPSãFMâ=DÕEEÕEEÙGHÞIKÛEGÖ<>Ö<>Ü@CÚ>?Ù??Ú@@ÙA@ÖB>ÓB=ÒA<ÐA;ß@:Û@;Ô?8ÌA:¿C9±A6 ;/‘9+Œ=.‡>/ƒ>.�>-€=,<+€=,�<,9-9-9-~8,}9.|8-|8-|8-|90|90|90z:1z:1{;2{;2{;2v=4u<3t;2s:1r90p7.m7-m7-m7-l8-l8-l8-l8-j8-j8-j8-l5.n70n91n91l7/i4,g2*e3*c1(e3*_/%^.$b2(^.$`0&n?5„IEˆQLˆWRWOrVKdRDQJ:>?/:A16A14A02>02<14<15;17:388677577557446116005./7,.8-1<.4A07E49H58G44E22D.062.40.3--2,14-45-8:-9=,7?'DQ3YkEh‚Sv”`w�bp˜Yf�NZzHWwETtBTtBVvDYyGYyGYyG[{I_M_M\|J[{I^~L^~L\|JTmOF_A9R4icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUmdUmdUneVneVneVddby{x—™˜²¶µÍÑÒäéìôùüúÿÿûÿÿûÿÿûÿÿýÿþþþüÿÿûÿÿúÿÿúÿüßúùÛïðÐáåÄÒØ´¼Ä�ž©�‡’j`hCRW7DG,EC.KD4MC9N?8L=8C:;SJKi`a€xv›“�¼µ¯×ÐÈçÝÓúêÝÿôéÿåÛïª£Äec¸ACËBIáNVÚVRÒLIËDAÎBAÔFE×EFÙCDÛBD×=?Ø>>Ù??Ø@?×A@ÕA=ÓB=ÒA<Ü?:Ù@:ÔA:ÍD<ÀD<²B7¡<2“9.Œ=0‡=0ƒ>/�>.€=-<+€=,€=,9-9-9-}9.}9.|8-|8-{8/}:1}:1{;2{;2{;2{;2{;2{;2t;2s:1p:0o9/n8.m7-k7,k7,l8-l8-j8-j8-j8-j8-i9-i9-n91m80m80m80m80i7.f4+c1(c3)a1']-#_0&c4*\-#_0&sD:OK‚UPXQqSK^J?OC7?<-37(2:+/<+0<.2=/4<15;17:37:388688668557257227016/08-.8-0;-2?.6C27E48G48G48G46=53:2/4-,1*.1(13(57*6:)6>'DQ5[lHk„Zy–fwœfl”X^‡KWwEUuCRr@Rr@TtBVvDWwEWwEXxF[{I]}K[{I[{I]}K\|JXxFPfOAW@3I2icSicSicSicSicSicSicSicSicSicSicSicSicSicSicSicSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUneVneVneVneVofWgklƒ‡ˆ£§¨¹¾ÁÐÕØåíðóûþõýÿùÿÿûÿÿüÿÿüþûýþùþýøÿþ÷ÿÿöóÿâñÿÞëùÖäòÎÛêÃÌÛ²³Â™ ¬„}‰cdnKLS4EI0HJ5KI:GE9D@7QEEk__‹�€¤š™µ°­ÊÇÂÜÜÔççÝ÷óèÿýñÿøíÿÝÕú·±èŽŽÌbd±>CÃPIÉTMÉOJÃF@ÊFBÔMJØJIÑ??Ò>>Ô>?Õ?>Ö@?ÕA?ÓB?ÓB?ÒC?×>8×?:ÒC=ÌE?ÀE>±B9¢=5•;2Œ<1‡=0ƒ=1�=0=-~<,€=-€=-~:/~:/~:/}9.}9.|8-{8/{8/~;2|<3|<3{;2{;2z;4z;4z;4p:0o9/o9/m9.l8-k7,j6+h6+i7,i7,h8,h8,h8,h8,h8,h8,o:4j81h6/i70j81j81e4-a0)e4-b1*].&a2*b3+Y*"_3*zNE~]XvWRiNGWC:J<3@:.:;-8<.08)/:,1<.2=/5=25;169078079468368349338138119.19..9+/:,1<.2?.5B18E4:I6;J7;C87?428.-3)-0%/1&24'48)4<'ER8_pPr‹d}šnwœif�XT}EUrBTqASp@Sp@TqAUrBVsCVsCWtD[xH]zJ\yI^{K_|L\yIVsCK\J<M;.?-gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUmdUneVneVofWofWpgXmru‡Œ�¤©­·¿ÂÍÕØãíïòüþôþÿøÿÿøÿþúÿüûÿúûþõúüñùùíù÷ëòÿçñÿäîÿßëúÙçõÒÝéÅÈÒ­´¾™œ¤|ƒbX_@GL5DL7DK;AG9>D8f\Z†|z«¡ŸÁ·µËÃÁÕÐÍãâÞîïé÷øðùöíüòèÿóéÿóíÿäßì¦¤´if«K=³QDÁYNÇ[QÆQH¿D=ÂA<ËD@Ë@=Ï?>Ð@?ÑB>ÒC?ÒC?ÑC?ÑC?Ö>9Ô@<ÒD@ÉE@½D<¯@9 >5•<4Œ<3‡=2ƒ=1�=0=/~<.=/€</~:/~:/~:/}9.}9.{8/{8/{8/~;2|<3|<3{;2z;4y:3y:3y:3m80m80l7/l7/k6.h6-h6-h6-h8.h8.h8.h8.g8.g8.g8.g8.k92h6/f4-g5.i70h70e4-b1*b3+b3+_0(_0(]1(V*!b6-SJn[U`OHN?8A7.=6,;9-9;.7=12:-3;.4</6<06<07:167/56.49249238139/39/2:/19.19,.9+.9+/:,0;+2?.6C29F5;H7=E6:B35;-06(/3%/1$13&15&29'GS;dtWw�m~šrq•g\‚QIq?Qn>Qn>Qn>Qn>Qn>Qn>Sp@Sp@WtD[xH]zJ]zJ_|L_|LZwGQn>ESF6D7(6)gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXpgXpgXinrz‚…“š «´¹ÄÍÒÜåêì÷ùôþÿôþýöÿüúÿúûÿ÷ûþóøúìõöæòóãòþêôýèôüåóøáòöÛëëÏØ×¹ÅÄ¥±°’�ŽregOMP;EL:EM>EODGSG~zqŸ›’Æ½¸ÙÎÌáÓÒçÛÛôêéü÷ôðïëûüöÿÿöÿþôÿúñÿôêÿçÞÿÚÒß‘}·fS¢K:²UF½WKµF;·@8ÈKEÇC>ÊC?ÌB?ÎC@ÎC>ÍD>ÍD>ÌC=Ô@<ÒC=ÎE?ÅD?¸A;ª=8ž;5•<4Œ<3‡=4ƒ=3�=2=1~<0=1=/~:/~:/~:/}9.|90{8/{8/{8/|<3{;2{;2y:3y:3x92w81w81m80l7/j8/j8/i7.i7.g7-g7-g7-g7-f7-f7-f7-f7-f7-d8-i70h6/g5.f5.g6/h70g6/e6.a2*e6.^2)\0'`4+a5,i=4|PGQJBE>6:6-85,99/8:/47,36+4:.5;/5;/69.69.68-57,46+19,19,19,19,19,19,19,19,08+.9+.9+/:*0;+3>.6A17B2<E4:C28?/5<,37)24'13%04%07%HT>gw]u�mv‘nf‰_RwKAh;Mj:Nk;Pm=Pm=Nk;Nk;Ol<Qn>VsCZwG]zJ^{K_|L_|LVsCLi9=H@/:2#.&gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVneVofWpgXqhYqhYcjpmtz„�’£¬±¾ÉÍÓÞâåðòðüüòüûõþùøÿ÷úÿôüÿòúýìøùçöøãööìù÷ëúöêýöæÿôâøëØçØÁÖÆ¯À±šŸ“}vn[ZWFOQCQWKYcZbme–˜‹²²¦ÕÎÆêÜÙõããüéëÿñôÿ÷ùÿýýýþùøûôõûñúýòÿÿóÿÿóÿÿñÿãÊî¬”¹q[¨WD¬SCµQB¹MA¿JAÂG@ÆE?ÉE@ÊE@ÊE>ÉD=ÈC<ÈC<ÒC?ÒD@ÌEAÂC=³=9¦;5œ;5•<6Œ<5‡<6ƒ=5�=4<3~<0=1€<1~:/~:/~:/}9.|90{8/{8/y90{;2{;2z:1x92w81v70v70u6/k90j8/j8/j8/j8/h8.h8.h8.g7-f7-f7-f7-d8-d8-d8-d8-h6/h70i81i81h70i81j;3l=5g80k<4b6-a5,oC:xLCtI@uJA:=647036/7:18;247.14+25,58-58-57,46+46+46+46+46)/7(08)08)08)08)08)08+08+19,08+08+/7*08+19,3;.4</9B/:C0;B0:A19=.68*24&/3$29'IU?eu[m„ghƒbWyTInE>e9Jg9Li;Nk=Nk=Li;Li;Mj<Ol>UrDYvH[xJ]zL^{M\yKQn@Eb47@;+4/!*%gdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSgdSkbSkbSkbSlcTlcTmdUmdUmdUmdUmdUneVofWpgXpgXqhYriZhowmt|‚‹’¥®µÂÍÑÔßãäïñòþþóýüôÿùöÿ÷úÿôüÿñýÿíýÿêýÿêÿöñÿøóÿ÷ïÿ÷íÿöëÿïáöÜÍäÊ¹Æ¯�§”ƒ€sce]P[YM_bYovo|…€¦­�¾À³ÚÖÍñãàÿìíÿñôÿñ÷ÿñ÷ÿ÷ûûúøøÿøøÿúôÿõîÿïòÿï÷ÿóÿñÖÿðÖÿÈ°Å}g¢O=®Q@¸RD³C8ÀIAÄH@ÇF@ÇF@ÈE=ÇD<ÆC;ÆC;ÓD@ÐE@ÊE@¾A=±;7£74š93•<6Œ<5‡<6ƒ=5�=4<3~;2<3=1~:/~:/~:/}9.|90{8/{8/y90z:1z:1y90w81v70u6/u6/t5.k90k90j8/j8/j8/i9/i9/h8.f7-f7-f7-d8-d8-d8-d8-d8-f5.i81l;4k:3j92j92m>6qB:n?7pD;g;2g;2SJŒaXTKpE<6=52913:27<5492/5+25,9<345-35*24)13(13(35(46)57*,7',7'-8(-8(-8(-8(-8(/7(19*08)08+/7*/7*/7*08+08+7@+9B-=D2=D2=A29;-35'/3$3:*JVBcr[f}a\wVLnICgA=c:He7Kh:Nk=Nk=Kh:Jg9Li;Nk=TqCWtFZwI[xJ]zLZwINk=A^05;9*0.!'%heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVg`MjeOnlWnl]ff^eeeqqy���‡‘“–ž¡«³¶ÃÈËÙÝàìíï÷÷÷ûùúþýûÿþúÿÿûýþøûüöùüóúýôùÿõùúõùúôøúïúûëûýèöùÞäçÈÒÖµ¶¼š”›ymvW\fK`lTq~lƒ‘€�žŽ··µËËÉââàïïíôôòøøöúúøùù÷þþüþþüþþüþþüþþüþþüþþüþþüæÿÿðÿÿûÿÿýïîÐª§ a\™D=¸MEÄKBÈC:ÊA7ÎD:ÑH>ÏJAÉI>ÆG>ÁJ2¿K4¹L5¯K4 H2”F2ŒE3‡E5‚D5�C6€@4‚>3…;2‡9/Š7/�6-~:1~:1}90|8/{7.z7.y6-x5,w7-w7-x8.x8.v8-u7,s5*q3(h91h91h91g80h70g6/g6/g6/f5.h6/i70j81i70h6/f4-g2,k1-k4/n70m80k9.j:.i>.iB1dC2gJ8aJ8raOyn\ƒ|j…‚qOL;4:04:04:039/39/39/28.28.17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4.05//4./4..3-.3-/4./4.05/0;32=55A77C98D86B64@22?.3@.DQ=WeN\jSSaHHV=DR8FT:Ic>Ke@Ke@Ke>Je<Je<Lg>OjAUpGYtK\vO]wR]wTWpPHaC8Q3).2&+/$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVjcPlgQmkVlj[gg_lll~~†�’ž§±³¹ÁÄÏ×Úâçêðô÷ûüþÿÿÿÿþÿþýûÿþúÿÿûþÿùûüôøûòøûò÷ýóøùóøùñøúíøùéùûåòõÚáâÃÌÐ¯´¸—‘–vkrSYaI_kUt�oŒ˜Š›©œÀÀ¾ÓÓÑççåóóñ÷÷õûûùüüúûûùþþüþþüþþüþþüþþüþþüþþüþþüîÿÿôÿÿüÿÿÿüúÿíêñ¿¸Ã}u¢J@³K@»J<ÅK>ÈJ>ÄD9½=2¿?6ÃD;ÂH3ÃJ7½M9³J7¦G5™C4�D6‹F7ƒC7�C8�A7�>5‚<4„:1†91‡81}:2}:2|91z:1y90x8/w7.v7.u6-v7.t8.t8.t8.r6,p4*o3)i81i81i81h70h70h70g6/g6/e3,e3,g5.h6/j81j81j81k92k60l71m80l:1k;/l>1j@0iD2hG6kP=gR?ufS�vd‹†s†ƒrML:4:039/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4.05//4..3-.3-.3-.3-/4.05/-80/:21=34@66B66B66B45B16C1CP<P]IR`IIW>AO6BP7FT:Ic@Jd?Ke@Ke>Ic<Hc:Id;Je<SnEXrK\vQ]wT[tTTmOC\>3L/).2',0$)-heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVhdYkd\kd\md]meZmfVmhTmhRmkVjk[jkcvxw‘‘™¨ª¶¾ÈÊÓÛÞêòõ÷üÿüÿÿþÿÿÿÿÿÿþÿþýûÿþúÿÿúýþøúûóõøïóöëñ÷ëô÷îöøíöøêö÷åõ÷áîîÔÛÛ¿ÉÊ«°±’“–yuy^kpZt{iˆ���§œ¬¶­ÎÎÌÞÞÜïïíøøöûûùþþüþþüýýûþþüþþüþþüþþüþþüþþüþþüþþü÷ÿÿùÿÿþÿÿÿüúÿúôÿöíÿÑÄÙž�•L=§Q@¬K;ª>1¸G9ÑXMÐTJ¾?6ÆD6ÇH9ÄJ=¹I=ªB7�?5•A7’E=‡A9„A9�@:>8~>5<4<4€;4x<2x<2w;1w;1v:0u9/t:/t:/s9.r9.r9.r9.q8-n8,l6*k5)j81j81j81j81i70i70i70h6/g5.g5.g5.g6/h70i81k:3k:3l;4k:3i:0j;1k?2lB4iD2fE2fI7lVAjYEviV†l‘Ž{€mEF439/28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+/4./4./4./4./4./4./4./4./4./4..3--2,-2,.3-/4./4.*5-+6.-9//;12>24@46B47D38E3?L:ER>CQ:;I28F->L3ES:H`>Jb@LdBKc?Ia=G`9F_8G`9RkDXpL]uS^vVZqTPgK=T8,C)).2',0%*.heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVjcYkd\kd\md]meZmfVniUljSlkVlm]pqi€‚�ž¡¨º¼ÈÃÍÏÜäçóûþûÿÿúþÿüýÿýýýüûùÿþüÿÿûÿþùûüôõöîîñæëîãçíáíñãðôåñôãòôßðòÜêêÐÙØ¼ÈÇ«²±•¡¡‡‘“}‘’€œž�ª­¢¶»´ÀÅ¿ÜÜÚééçööôûûùýýûÿÿýÿÿýýýûþþüþþüþþüþþüþþüþþüþþüþþüüúÿÿþÿÿþÿöòïûôîÿýóÿûíÿõäêÄ±·ƒn”Q>¡P=¸XH¸L?¸D7ÀG<Ç>4ÉD;ÈH?¿F>°?9¢;6š=8–A>�?;‡@<�@<}@;z?9y@9x?8v?8v=4v=4v=4u<3s=3r<2r<2q;1o;0o;0o;0l:/k9.j8-j8-i7,n72n72m61l71l71k60i70i70l:3j92h70g6/f7/f7/h91h91j?6f>4e=1f>2hC3iE5gF3cG2cJ6hV@k\GskV‡‚n�Žzor_9>*28.28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3-.3-.3--2,-2,-2,-2,.3-.3-)4,)4,*6,+7-.:01=14@25A36C2:G5<I58E12@)2@)8F/?M4DX<G\=K`ALa@K`?I_;H^:H^:SiEZoN`uV`tXZnSNbI9M4(;%',/%*-$),heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVjcYkd\kd\md]meZmfVlgSkiRnmXop`svmƒ‡†£¨®¿ÃÎÍ×Ùçïòùÿÿûÿÿùýÿýþÿÿÿÿþýûÿÿûÿÿúþýø÷øðïñæçêßâæØÞäÖçëÚêïÛíðÛíïÙîîÖéçÎÚØ¿ÎÊ±Â½§¹´ ±®�¶´§Á¾µÉÈÃÒÓÎÙÙ×èèæòòðúúøüüúýýûÿÿýÿÿýüüúþþüþþüþþüþþüþþüþþüþþüþþüÿûÿÿûÿÿúúûûùûÿùûÿøüÿôýÿíÿÿìõàËÃ�ˆœcP–K8§L:¶O@»M>Æ=7ÈA;ÈD?ÀC?´<;©98 9:›==‘==Š>>„@?|A=xA<sB=rC=pC=s>6s>6s>6r=5p>5p>5p>5n>4n>4m=3l<2j;1j;1i:0i:0i:0p62p62p62o51m61m61k60i70l;4k:3h91e90e90e90e:1f;2dB6cA5cC4dD5fG5eH6cH3_I2^L6eV?jbKrmW„ƒn„‡r[`L3;&28.28.17-17-17-06,06,06,17-17-17-06,06,/5+/5+/5+.3-.3-.3-.3-.3-.3-.3-.3--2,-2,,1+,1+,1+,1+-2,-2,,6.+5-*4,*4++5,.8-0:/2=/2=-5@06A05A-1=)1=)5A+9E/=O5AS9FY=I\@J]?J]=K^>L_?TgG\oQcvZbtZYkSK]G6G4$5"&+.$),"'*heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTheVjcYkd\lc\md]meZlfVlgSljSlnXorasvm�…„Ÿ¤ª¸¿ÉÖßäîöùùÿÿûÿÿùýÿþÿÿÿÿÿþýûÿÿûÿÿúüüôóõêëíâãçÙßãÕÜãÓäéÒçìÕéíÖêìÔëëÓèæÏßÚÄÔÎ¸ÔÍºÍÆ¶ËÃ¸ÐÉÁÙÒÌàÛØëååòîïòòðùù÷ýýûýýûýýûÿÿýþþüüüúþþüþþüþþüþþüþþüþþüþþüþþüÿøüÿöùÿýýþÿý÷ÿýïÿøëÿõòÿøëúçÿÿíÿïÛÌ§”£lX£ZG­VCªM;ÁA8ÃB<ÃD>¿D?·?>­;;£99œ:;–<<Ž>?…?=}@=wB<pC=mE=lF=q?8q?8q?8q?8p?8o>7o>7n?7o@8n?7m>6i=4h<3h<3h<3i=4r73q62q62p62o51m61l71j81h70g80e90e:1d<2f>4f@5gA6]C4aG8cL:dM;cM8`K6]K3]M4]Q9`Y?miPss[€„mt|eFO:2>(39/28.28.28.17-17-17-06,17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0*+0*+0*,1+-2,,6.,6.*4,*4+*4++5*-7,.9+-8*0;+4?/5@/4?.3>-3?+4@,7F/;J3@P6DT:GW<JZ?M]@O_BUeJ^nSdtZbqZXgRIXE4B1$2!&+.$),"'*heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheTjdVjcYkd\lc\md]meZlfVljUllTkmWjn]lrhy}•œ¢¯¶ÀÒÛàëòøùÿÿùþÿ÷ûþþÿÿÿÿÿúù÷ÿÿûþýøùùññóèéëÞãçØáåÖàç×äêÐçíÓèìÑçéÑèèÐçåÎáÚÇ×Ð¾ÛÒÃÚÐÆÞÔËçÜØîäãóéêúñôÿøýùù÷þþüÿÿýýýûýýûÿÿýÿÿýüüúþþüþþüþþüþþüþþüþþüþþüþþüÿ÷÷ÿùùÿýýüÿÿôÿþêÿûíÿÿíÿýñÿúðûíÿþíÿûèôÎ»­va‘P:¦^H»I>ºH=ºH>ºG@·F@°C@¦=:�97—<;‘=;ˆ>;€A<wB:sD<nF<lH<q?8q?8q?8q?8p?8p?8p?8p?8qB:pA9n?7j>5i=4j>5j>5k?6s63r73q62p62n72l71j81i81d8/d90c;1d>3d@4cA5cA5bB5VG4^O<gVBhWCbS<^O8[O5\R7]V<]Y>mmSsw^z‚jcmU2>(5C,4:039/39/39/28.28.28.17-17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1+,1++0**/)*/)+0*,1+,1++5-+5-*4,*4,+5,+5,,6+-7,,7)/:,2=/6A17B27B25@/4?.2?+5B.:G3>L5AO6ES:JX?M[BTbI]kTcqZ_lXUbPERA2>0#/#(..&,,$**heVheVheVheVheVheVheVheVheVheVheVheVheVheVheVheVjdTjdVjcYkd\lc\md]lfZlfVomXmmUimVgkZembr{xŽ—œ¨±ºÊÓØäëñöþÿ÷üÿøüÿþÿÿÿÿÿúù÷ÿÿúýýõøøîðòåéëÝåéÚåéØåìÚæíÎèïÐéîÐæéÎèæÏèãÏáÚÈÙÏÃÚÍÄßÒÌìÞÛúììÿôöÿõùÿõûÿøþýýûÿÿýÿÿýþþüþþüÿÿýÿÿýýýûþþüþþüþþüþþüþþüþþüþþüþþüÿüúÿýúÿûøùýüøÿÿôÿÿðÿÿêþüðÿûùÿûÿÿôÿöæÿôßÿãÍ×­”¢sY°SA®Q?®N>°O?±OB¯J@¥C:š<4—<7‘>8‰?6ƒ@7{B7tD6qE8nG8s>:s>:s>:q>:q>:q>:q>:p?:sB=rA<p?:m>8l=7l=7m>8n?9r73r73q73n72m82j81i81f:1f;2d>3d@4bB5`C5]A3\@2[?1QI4[S>f^Gg_H`Y?ZS9ZS7\W:ZV;WW;knSrx^u}eUaI%37E.4:04:04:039/39/39/28.28.17-17-17-06,06,/5+/5+/5+-2,-2,-2,-2,-2,-2,-2,-2,,1++0*+0**/)*/)+0*+0*,1+)3+)3+*4,+5-+5,,6--7.-7,,6+.8-2=/6A39D69D67B46A1/<*2?-5B09F2<J3@N7FT=JXAR`I[iRanZ\iWQ^MBN@/;/!-!+1/(.,&,*heVheVheVheVheVheVheVheVifWifWifWifWifWifWifWifWkeUkeWkdZle]md]ne^mg[mgWqoZkmUkoXkr`jrgozv†‘•Ÿ©²»ÄÉÑØÞèðóöûÿúþÿþÿÿÿÿÿþýùÿÿúþþöúúîöøêô÷æðôãìñÝçïÚð÷ÖíòÒëîÑììÒèæÏáÜÉÝÕÈÞÔÊáÔÎèÚ×òääúëîÿñöÿ÷ûÿùÿÿúÿþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüÿþùÿþùþþüýÿþûÿÿúÿÿøÿÿúÿÿüÿÿÿÿÿÿü÷ÿüñÿýìÿûåÿóÛÿíÑÁe¦cI—O7 T=ªYF¤Q?ŸI:¢L?�;0Œ=0‡=0=/x=/t?/rC3sE5s<9s<9t=:s>:u@<u@<t?;q>:s@<r?;q@;q@;p?:o>9o>9o>9n72n72n93m;4l;4j;3g<3d<2c?3^>1dG9cG9T=-O8(M8'D/TR;PN7KI0MK2]Y>ieJeaDVU7XX<]`CosXz€fcmT=I1,:#1?(5;15;14:04:04:039/39/39/39/39/39/28.17-17-17-06,16016005/05//4./4./4./4.,1+,1+,1+,1+,1+,1++0*+0*.5.-4--4-,3,-4--4-.5-.5-+2*-4,08-5=29A6=E:?G<AI>7B25@03>-1<+2>*9E/BN8IU?O[EVbN]hWYdTLWI<F;/90)3*)/-(.,'-+heVheVheVheVheVheVheVheVifWifWifWifWifWifWifWifWkeUkeWkdZmd]md]mf^mg[khWonYjlTjoXkr`jtiq|x‰”˜¡®¶¾ÇÌÓÚàéðö÷üÿûÿÿþÿÿþþüþýùÿÿúþþôûûï÷ùëô÷æðõáìñÛæî×êðÎæëËäçÊææÌãáÌßÙÉÝÕÊßÔÎçÙØíßßöçêýîóÿôøÿ÷ûÿúÿÿûÿþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüúÿùûÿúýÿüþþþÿýÿÿüÿÿúÿÿúÿÿûÿÿûÿÿúùÿüõÿþñÿÿìÿüãúöÛÿéÌß²•§uZ‘[A–ZB›YCœUAšQ>�F5�F4‰D4…D2}B0yB.s@-o?+v?:t=8u>9v?:t?9q<6r=7sA:q?8q?8q?8o>7o>7n=6n=6n=6l;4m<5m>6k?6j?6h@6eA5cA5dG9[A2^G7\I8N=+F7$G8%A4!IM4GK2DG,BE*MM1[[?abC`aBYY=dgJsw\sy_X`H8D,/;%6D-7=36<26<26<25;15;15;15;15;15;15;14:04:039/39/39/27127127116016016005/05/.3-.3--2,-2,,1+,1++0*+0**1**1*)0))0))0)*1*+2+,3,.5--4,.5-07/4;39@8?F>BIA:G69F56C13@.2?+5B.;I2?M6KXDR_KXeSVcRKWI<H<0<2*6,+1-*0,)/+heVheVheVheVheVheVheVheVifWifWifWifWifWifWifWifWkeUkeWlcZmd]md]mf^mg[khWmlWimTjoXktaiuiq}yŠ˜›¤³ºÀÉÐÕÜâëòø÷üÿúþÿýþÿþþüþýùÿÿ÷ýýóúûí÷úéô÷äïôÞéîØãëÓâèÆÞáÂÛÞÁÞÞÆÞÛÈÞÖËßÖÏäÙ×îâäóçëúîòÿôøÿ÷ûÿøüÿúýÿüÿþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþü÷ÿúøÿüúÿþþþÿÿûÿÿúÿÿøÿÿ÷ÿÿøÿÿùÿÿúúÿýøÿÿôÿÿñüÿíöþçÿóÙÿùÞÿíÓâÀ¥«ƒj‡YA…Q;“[D—]G�R=€F2w=)t=)t@+vC.xE2s>8p;5q<6vA;sA:p>7r@9xG@n=6n=6n=6m>6l=5l=5l=5l=5g?5h@6gA6gC7eC7cC6`C5^D5aL;UB1ZI7`S@RG3C;&E=(GA+>G,BH.@F*<@%?B%LO2_`AijKaaEnqTvz_gmSHP84<%4=(=F18>48>48>48>47=37=37=36<28>48>47=37=37=36<26<26<25:449349349338238238227105/05//4..3--2,,1++0*+0*(/((/((/((/((/()0)*1*+2+070.5.+2++2+.5.5<5<C<AHA?L;>K:<I78E34A-2?+3A*5C,DQ=KXDQ^LQ^MHTF<H<2>4-9/-3/-3/,2.gdUgdUheVheVheVheVifWifWifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWmlWimThpXht`hthm|wˆ—š¥´»ÀÉÐÔÛáéðööûÿúþÿýþÿÿÿýÿþúþþöýýñúûí÷úéô÷âîóÝçìÕàèÐÜà¿×Ú»ÖÖ¼Ù×ÂÝ×ÉßÖÍåÛÙìàâøìðüïöÿõûÿùþÿúýÿûûÿûûÿýúþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüöÿþ÷ÿþúÿþþþÿÿüÿÿùÿÿøÿÿ÷þÿøÿÿøüÿùùÿýúÿÿøþÿøúÿõöÿóÿþìÿýéÿòßÿñÛÿðÚñÒ½³�zyS<tJ2uH1wI2{M6~O;zK7o@.e8%{LBsD:qB8sD:qB8g;0d8-h<1j>3i?3i?3i?3f>2f>2f>2f>2aA4`C5`C5_C5^D5[D4ZE4VE3XI6OB/\T?oiSc^HMK4IG0LJ3;E*?H->G*<B&<A#FI,VY:deFmmQxx\tw\[_F@D-6;%8@+<D/9?59?59?58>48>47=37=37=39?58>48>48>48>48>48>48>47<67<67<66;56;56;55:45:438238216005//4.-2,,1+,1++0,+0,*/+*/++0,,1--2.-2.051.3/+0,+0,-2.2738=9<A=?L;@M<@M;=J88E13@,1?(0>'<I5BO;HUCIVEDPB;G;2>4.:0.5..5.-4-gdUgdUgdUheVheVifWifWifWifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWkmWjnUiqYgs_drejyt…”—¡²¹¾ÇÎÓÚâèïõôùýùýÿýþÿÿÿýÿÿúÿÿøÿÿóþÿñûþë÷úåðõÞèîÔàéÎÛÜ½ÕÕ¹ÑÑ·ÔÑ¾ÚÔÈáØÓêàßôéíþóùÿöþÿûÿÿýÿÿþÿÿþúÿþúþÿùþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüøÿÿøÿÿûÿÿþþþÿýþÿûüÿûúÿúúÿùùÿù÷ÿù÷ÿüùÿÿûþÿûûÿüùÿûùôîÿÿöÿþôÿýóÿüîÿ÷çùçÓéÓ¾Ï´Ÿ¶š„•u`yVBlI5mH6rM;uP>mF7iB3gB2jE5nI9oJ:pK;oK;eA1eA1cB1cB1cB1cB1cB1bC1\G6\G6\G6ZG6YH6WH5TG4RG3PH3MH2fdM~~fprZVX@IM4HL3;E*<F+?H+AG+AF(DG*MN/TU6xw[{z^nnTUU=AC-?A,>A.;>+9?59?59?58>48>47=37=37=38>48>48>48>48>48>48>48>49>89>89>88=78=78=77<67<66;55:449338227105//4./4.-2.-2.,1-+0,+0,,1--2.-2.,1-,1-,1-,1-.21043376598:H7=L9@O<@O:<K67F/4C,2A*6E.:I4@O<BP??M>8F91?2,9/.5.-4-,3,fcTfcTgdUheVheVifWjgXjgXifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[khWkmWioUiqYgs_bpcgxr‚”– ³¹ÁÊÑÕÜäéðöõúþùýÿýÿþÿÿýÿÿúÿÿöÿÿôÿÿñÿÿïúýèò÷àéïÕàéÎÙÚ»ÑÑµÍË´ÎËºÖÏÅßÕÓìâãøíóÿöþÿùÿÿüÿÿýÿÿÿýþÿúýÿ÷þÿøþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüýýÿýþÿýþÿýÿþþþüþÿùþÿ÷ÿÿõýýóýýõþýøþýùÿþüÿýÿÿýÿÿþÿþùÿÿüÿÿúþúöõýøôÿþöÿþñÿþïÿûéÿóàöåÓåÓ¿Ò»©¹Ÿ�ŸƒuŽrd|]I}^JrVAaE0W;&Y=(Z?*X=(`E0`E0_F0_F0`G1`G1^H1^H1[L9ZM:ZM:XM9XM9UM8RL6QL6NL5QQ9ikS|€glrXSY?DM2>G,:G+<F+?H+DJ.EJ,DG*HI*ML.yx\tsWfdKTR;LJ5KJ6FE3<=+:@69?59?59?58>48>48>48>47=37=38>48>48>48>49?59?5:?9:?9:?9:?99>89>89>88=78=78=77<66;55:4493382382/40.3/-2.,1-+0,+0,+0,+0,+/.,0/-10.21/32/32/32.210A.5F3;M7>P:=O7:L47I/6H.3E-6H0:L6<M::K95F6/?2*:--4,-4,,3+fcTfcTgdUheVheVifWjgXjgXifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^mg[jiWjlVhnThrYfs_aqdhys…—™¤·½ÈÑØÛâêîõûøýÿúþÿýÿþÿÿýÿþùÿÿõÿÿóÿÿðüÿêøüåïõÛäêÐÛäÇÖÕ¹ÎÌ³ÇÅ°ÊÄ´ÐÉÁÚÒÐêßãöìôÿ÷ÿÿúÿÿýÿÿþÿÿÿýûÿùüÿøûÿöþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüÿûÿÿüÿþýÿýÿþúÿúøÿ÷÷ÿó÷ÿò÷ÿòøÿóûÿøýÿúÿýþÿüÿÿûÿÿúÿýõÿÿúÿÿüÿÿýÿÿþÿýýûúûõ÷ùìÿÿóÿÿïÿÿïÿþíÿýíÿöçÿîâüêÞúäÍýçÐáË´¥�xt^GdP8aM5\H0\J2\J2\J2]K3\L3]M4]M4]M4WO:WO:VP:VP:TO9QO8PN7NN6MO7PT;`fLfoTU^CEO4AK0:G+=J.?I.CL/HN2HM/FI,OP1YX:qmRjfKa]D[V@YT@TQ>MJ9EB1;A7;A7;A7;A7:@6:@6:@69?58>48>48>49?59?5:@6:@6:@6;@:;@:;@::?9:?99>89>89>8:?9:?99>89>88=78=77<67<6495273162/40-2.,1-+0,+/.,0/,0/-10.21.21.23-12,01):'/@-6H2;M5=O7<N4:L2:L25G-7I1:L6<M::K96G70@3+;..5--4,,3+fcTfcTgdUheVheVifWjgXjgXifWifWifWifWifWifWifWifWleUldWlcZmd]md]mf^kg[jiWikUhnThrYgt`brej{u‰›�©¼ÂÎ×Þàçïòùÿúÿÿûÿÿýÿþþþüþýøúúðúúîúûë÷úåó÷àéïÕÞäÈÕÞÁÓÒ¶ÊÈ¯ÂÀ«Å¿±ËÄ¼ÖÎÌæÝâôêòÿöÿÿùÿÿþÿÿÿÿýÿúûÿùûÿöûÿôþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüþþüÿùÿÿúÿÿüÿûÿþøÿúôÿõóÿòñÿðòÿñõÿóøÿöüÿûÿþÿÿüÿÿùÿÿøÿÿùÿÿúÿÿûÿÿýÿýýÿùýÿúÿûüÿúöüðùýîûüìýûìÿúìÿúîÿýñÿüñÿðÖÿûáíÜÂŸŽtaP6RB(XH.XH.[M2[M2\N3\N3[P4[P4\Q5\Q5TO9TO9TO9QO8PN7NN6KM5IM4JN5LR8S\AOY>?I.9F*?L0=J.AN2DN3HQ4LR6IN0JM0ZY;miLhdIc]C_YA_ZD`[GZUBQN=LI8=C9=C9=C9<B8<B8<B8;A7;A79?59?59?5:@6:@6;A7;A7;A7;@:;@:;@::?9:?99>89>89>8;@:;@:;@:;@::?9:?9:?9:?99>:8=95:6384162/40.3/.21.21.21-10-12,01,01-12-12$5"*<&3E/9K3<N6;M3;M3;M38J09K3;M7<M:<M;7H81B2,<//6..5--4,ZgM[hN\hP_iQakSckTfkWhkXfgUhgUheVheVjdVldWldYmeZjgVkhYkg[kg^kg^jf]hfZgeVfiVfkUenYbo^dqhsƒ‚–§®¶ÈÒÓÚàäéíò÷ú÷ýýùþúúÿøüÿôüþñöùèùúèø÷åòñÝïìÙìéÖáÞË×Ò¿ÚÍ¼Ì¿¯À²¥¿²©Â·³ÍÁÁÜÑ×êàèúòýüöÿþûÿÿþÿþýÿüýÿüýÿüýÿþþþþþþþþþþþþþþþþþþÿþüÿþüÿþüÿýúÿüùÿüùÿüùÿýùÿþúÿþúÿþýÿýüÿüûÿýþÿþÿÿþÿÿýþýûüÿþÿÿúúÿûøÿýøÿüöÿúòÿøïÿùñÿûÿÿýÿÿýþÿÿýÿÿûýÿüýÿþüýÿþÿÿÿþÿÿüÿÿýþÿý÷ÿþîÿÿæÿÿâööÜýûâãâÆ�‰nTO2UN1RL,SJ+WN/UO/UN1TO1SO2QP4QP4PP6QM2PO3QO6PP6MO7KO6HM6EM5HQ6FO4AJ-?F'@G&EK)GM)FL(ST2RS3MN.JK,TT8bbHccIZZB[YB\ZC][B][B[Z>XW9UT6SR3KE/JD.FA-D?,A>/@>1??3>@5<=5;>59?59A67B48C57C57D3:B79A69A68@58@59A69A6:B7:B7:B79A6:B7;C8<D9=E:>F;7B:7C97A66A16?.4<-39-270.5./51-7/-9+-<%.B3J7O7Z 8Y$8W+:U2:R8;P==O?>O=:L6@R8EX:EZ;DY:>U93J0(>'.5-,3++2*ZgM[hN\hP_iQakSckTglXhkXghVihVifWifWkeWmeXmeZnf[khWkhYkg[kg^jf]jf]hfZgeVgjWglVfoZerajwnzŠ‰š«²·ÉÓÑØÞáéìò÷úøþþùþúúÿøûþóúüï÷úé÷øæõôâíìØéæÓåâÏÜ×ÄÑÌ¹Ë¾­Á´¤º¬Ÿ¼¯§Á¶²ÌÀÀÛÐÖèÞæûóþý÷ÿþûÿÿþÿþýÿüýÿüýÿüýÿþþþþþþþþþþþþþþþþþþÿþüÿþüÿþüÿýúÿýúÿüùÿüùÿýùÿýùÿþúÿþýÿýüÿüûÿýþÿþÿÿþÿÿýþýûüÿþÿÿýýÿüùÿøóøíçòåÝöèßÿïçÿûÿÿýÿÿýþÿÿýÿÿûýÿüýÿþüýÿýþÿþýÿÿýÿÿýþÿý÷ÿþîÿÿæÿÿâ÷÷ßýûââàÇ‹‡lRM0TM0QK+SJ+WN/UO/UN1TO1SO2QP4QP4PP6QM2PO3PN5PP6MO7KO6HM6EM5HQ6EN3BK.AH)BI(GM+JP,KQ-NR/PT1VZ9^aBaaE[[?VV<UU=VV>VV>XV=YW>XW;XW9WV8VU7QK5OI3LG3ID1DA2B@3??3>@5<=5;>59?59A67B48C57C57D3:B79A69A68@58@59A69A6:B7:B7:B7:B7:B7;C8<D9=E:>F;<G?<H><F;;F6<E4:B39?38=67>76<83=51=/3B+9M*BY-Ia1Nq7Mn9Ji=Fa>AY?<Q>:L<:K9=O9DV<K^@LaBLaBF]A:Q7/E.-4,+2*)0(ZgM[hN\hP`jRakSdlUglXilYijXkjXkhYkhYlfXmgYnf[og\khWkhYkg[jf]jf]ie\hfZhfWgjWejTdmXgtco|s�Ž›¬³³ÅÏÎÕÛÞåëñöúøþþúÿûùþ÷øûòõ÷êòõäðñßêé×áàÌÜÙÆ×ÔÁÐË¸ÆÁ®À³¢½° ½¯¤Ã¶®ËÀ¼ÖÊÌãØÞíãëüôÿý÷ÿþûÿÿþÿþýÿüýÿüýÿýÿþþþþþþþþþþþþþþþþþþþÿþüÿþüÿþüÿýúÿýúÿýúÿüùÿüøÿüøÿüøÿýüÿüûÿûúþüýÿþÿÿþÿÿýþþüýÿþÿÿýýÿýúüóîêßÙâÕÍëÝÔüëãÿûÿÿýÿÿýþÿÿýÿÿûýÿúýÿþüýÿýþÿþýÿÿþÿÿþÿÿý÷ÿýíÿþåÿþáøøàþüåáßÆ‰…jPK.RK.QJ-SJ+VM.UO/UN1UP2TP3QP4QP4OO3QM2ON2PN5OO5MO7KO6IN7FN6HQ6FO4CL/EL-FM,KQ/OU1SY5QY0W_8jpLy]qvVY^@LO4MO7QQ9QQ9QQ9SQ8TR9UT8WV:ZV;XR<VP:RM9NI6HE6DB5AA5?A6<=5;>5:@69A67B47B47C57D3:B7:B79A69A69A69A6:B7:B7:B7:B7:B7:B7;C8<D9>F;>F;>IA>J@?I>>I9?H7>F7>D8=B;>E>;A=6@85A39H1BV3Pg;ZrB]€F\}HVuIMhEBZ@9N;5G74E3<N8EW=NaCRgHShILcG@W=4J3180/6.-4,YgM[hN\hP^jRblTemVhmYjmZklZklZlj[liZnhZnhZog\ph]liXkhYjfZjf]ie\ie\hfZhfWehUbgQajUerao|s~Ž�”¥¬¨ºÄÈÏ×Úáçìô÷öûþ÷ýûõúôóöíïñäèêÜãäÒÜÛÉÔÑ¾ÎË¸ËÆ³Ã¾«¼·¤Ä·¦ÇºªÎÀµÖÉÁßÔÐêÞàóèîúðùýõÿþøÿÿüÿþýÿýüÿüýÿüþýýÿþþþþþþþþþþþþþþþþþþþÿþüÿþüþýûÿýúÿýúÿýúÿýúÿüøÿû÷ÿû÷ÿýüÿüûþúùýûüÿýþÿþÿÿýþþüýÿüýÿýýÿýúýôïíâÜæÙÑðâÙÿðèÿûÿÿýÿÿýþÿÿýÿÿûýÿúýÿüüýÿýþÿþýÿÿþÿÿþýÿþõÿýíÿýäÿüßûûãÿþçâàÇŠ†mPJ0SL0SL/UL-VM.UO/VO2UP2TP3QP4PO3NN2PL1NM1OM4NN4LN6KO6JO8HP8JS8GP5GP3KR3MT3PV4V\8]c?fsGt�U‡”i�›s…�lnuTZaBRV;LN6NN6MM5NL5OM6TP7WS:YU<ZT>XR<TO;QL9KH9GE8CC7@B7=>6<?6:@69A67B47B46B46C2;C8:B79A69A69A69A6:B7;C8;C8:B7:B7;C8;C8=E:>F;?G<<G?<H>>H=>I9?H7>F7>D8=B;=D=;A=6@85A39H1DX5Ri=]uEY|BXyDRqEIdA<T:2G4.@0->,6H2@R8L_AQfGShIMdH@W=4J329107/-4,YgMZhN\hP^jRblTemVgoZjo[lo\lm[mk\mj[nhZnhZoi]ph]liXkhYjfZie\ie\ie\ig[igXfiVchRajUerao|s{‹ŠŽŸ¦Ÿ±»ÂËÒÕÜäéðöòúüôúøñöðíðçéëÞáãÕÚÛËÒÑ¿ÌÉ¶ÉÄ±Ã¾«¾¹¦»´¢Ë¾®ÓÅ¸ÝÏÄæÙÑíâà÷ëíÿôúÿøÿÿ÷ÿÿúÿÿüÿþýÿýüÿûüþüþýþÿÿþþþþþþþþþþþþþþþþþþÿþüÿþüþýûÿüùÿýúÿýúÿýúÿû÷ÿúöþùõÿýüÿûúýùøüúûþüýÿýþÿþÿÿýþÿüýÿüüÿüùÿøó÷ìæòåÝøêáÿóëÿûÿÿýÿÿýþÿÿûÿÿûýÿúýÿüüýÿüýÿþýÿÿþÿÿþýÿþõÿüìÿüãÿúÝþýèÿÿëåãÌŒˆoRL2UN2TM0WN1VM.UO/WP3VQ3UQ4QP2ON2MM1PL1NM1NL3MM3LN6LP7KP9JR:LU:IR7JS6QX9SZ9U[9]c?gmI€”a’¦sŸ±�š«’¡xˆ”pr|Z\bFLP7KM7LK6KI4NI5PK7TM:VP:WQ;VP:SN:QL9LI:IG:EE9CE:=>6<?6:@69A67B47B46B46C2;C8;C8:B79A69A6:B7;C8;C8;C8;C8;C8;C8<D9=E:>F;?G<<G?<H>=G<=H8>G6=E6=C7=B;:A:9?;5?75A39H1BV3Ne9Wo?Sv<St?NmAE`=8P6-B/*<,+<*1C-<N4H[=OdERgHLcG@W=3I2.5-+2*'.&
\ No newline at end of file
diff --git a/jpeg-8d/transupp.c b/jpeg-8d/transupp.c
new file mode 100644
index 0000000..016f383
--- /dev/null
+++ b/jpeg-8d/transupp.c
@@ -0,0 +1,1597 @@
+/*
+ * transupp.c
+ *
+ * Copyright (C) 1997-2011, Thomas G. Lane, Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains image transformation routines and other utility code
+ * used by the jpegtran sample application.  These are NOT part of the core
+ * JPEG library.  But we keep these routines separate from jpegtran.c to
+ * ease the task of maintaining jpegtran-like programs that have other user
+ * interfaces.
+ */
+
+/* Although this file really shouldn't have access to the library internals,
+ * it's helpful to let it call jround_up() and jcopy_block_row().
+ */
+#define JPEG_INTERNALS
+
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "transupp.h"		/* My own external interface */
+#include <ctype.h>		/* to declare isdigit() */
+
+
+#if TRANSFORMS_SUPPORTED
+
+/*
+ * Lossless image transformation routines.  These routines work on DCT
+ * coefficient arrays and thus do not require any lossy decompression
+ * or recompression of the image.
+ * Thanks to Guido Vollbeding for the initial design and code of this feature,
+ * and to Ben Jackson for introducing the cropping feature.
+ *
+ * Horizontal flipping is done in-place, using a single top-to-bottom
+ * pass through the virtual source array.  It will thus be much the
+ * fastest option for images larger than main memory.
+ *
+ * The other routines require a set of destination virtual arrays, so they
+ * need twice as much memory as jpegtran normally does.  The destination
+ * arrays are always written in normal scan order (top to bottom) because
+ * the virtual array manager expects this.  The source arrays will be scanned
+ * in the corresponding order, which means multiple passes through the source
+ * arrays for most of the transforms.  That could result in much thrashing
+ * if the image is larger than main memory.
+ *
+ * If cropping or trimming is involved, the destination arrays may be smaller
+ * than the source arrays.  Note it is not possible to do horizontal flip
+ * in-place when a nonzero Y crop offset is specified, since we'd have to move
+ * data from one block row to another but the virtual array manager doesn't
+ * guarantee we can touch more than one row at a time.  So in that case,
+ * we have to use a separate destination array.
+ *
+ * Some notes about the operating environment of the individual transform
+ * routines:
+ * 1. Both the source and destination virtual arrays are allocated from the
+ *    source JPEG object, and therefore should be manipulated by calling the
+ *    source's memory manager.
+ * 2. The destination's component count should be used.  It may be smaller
+ *    than the source's when forcing to grayscale.
+ * 3. Likewise the destination's sampling factors should be used.  When
+ *    forcing to grayscale the destination's sampling factors will be all 1,
+ *    and we may as well take that as the effective iMCU size.
+ * 4. When "trim" is in effect, the destination's dimensions will be the
+ *    trimmed values but the source's will be untrimmed.
+ * 5. When "crop" is in effect, the destination's dimensions will be the
+ *    cropped values but the source's will be uncropped.  Each transform
+ *    routine is responsible for picking up source data starting at the
+ *    correct X and Y offset for the crop region.  (The X and Y offsets
+ *    passed to the transform routines are measured in iMCU blocks of the
+ *    destination.)
+ * 6. All the routines assume that the source and destination buffers are
+ *    padded out to a full iMCU boundary.  This is true, although for the
+ *    source buffer it is an undocumented property of jdcoefct.c.
+ */
+
+
+LOCAL(void)
+do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	 JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	 jvirt_barray_ptr *src_coef_arrays,
+	 jvirt_barray_ptr *dst_coef_arrays)
+/* Crop.  This is only used when no rotate/flip is requested with the crop. */
+{
+  JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks;
+  int ci, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  jpeg_component_info *compptr;
+
+  /* We simply have to copy the right amount of data (the destination's
+   * image size) starting at the given X and Y offsets in the source.
+   */
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      src_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	 dst_blk_y + y_crop_blocks,
+	 (JDIMENSION) compptr->v_samp_factor, FALSE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
+			dst_buffer[offset_y],
+			compptr->width_in_blocks);
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_flip_h_no_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+		   JDIMENSION x_crop_offset,
+		   jvirt_barray_ptr *src_coef_arrays)
+/* Horizontal flip; done in-place, so no separate dest array is required.
+ * NB: this only works when y_crop_offset is zero.
+ */
+{
+  JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks;
+  int ci, k, offset_y;
+  JBLOCKARRAY buffer;
+  JCOEFPTR ptr1, ptr2;
+  JCOEF temp1, temp2;
+  jpeg_component_info *compptr;
+
+  /* Horizontal mirroring of DCT blocks is accomplished by swapping
+   * pairs of blocks in-place.  Within a DCT block, we perform horizontal
+   * mirroring by changing the signs of odd-numbered columns.
+   * Partial iMCUs at the right edge are left untouched.
+   */
+  MCU_cols = srcinfo->output_width /
+    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    for (blk_y = 0; blk_y < compptr->height_in_blocks;
+	 blk_y += compptr->v_samp_factor) {
+      buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	/* Do the mirroring */
+	for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) {
+	  ptr1 = buffer[offset_y][blk_x];
+	  ptr2 = buffer[offset_y][comp_width - blk_x - 1];
+	  /* this unrolled loop doesn't need to know which row it's on... */
+	  for (k = 0; k < DCTSIZE2; k += 2) {
+	    temp1 = *ptr1;	/* swap even column */
+	    temp2 = *ptr2;
+	    *ptr1++ = temp2;
+	    *ptr2++ = temp1;
+	    temp1 = *ptr1;	/* swap odd column with sign change */
+	    temp2 = *ptr2;
+	    *ptr1++ = -temp2;
+	    *ptr2++ = -temp1;
+	  }
+	}
+	if (x_crop_blocks > 0) {
+	  /* Now left-justify the portion of the data to be kept.
+	   * We can't use a single jcopy_block_row() call because that routine
+	   * depends on memcpy(), whose behavior is unspecified for overlapping
+	   * source and destination areas.  Sigh.
+	   */
+	  for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) {
+	    jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks,
+			    buffer[offset_y] + blk_x,
+			    (JDIMENSION) 1);
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	   JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	   jvirt_barray_ptr *src_coef_arrays,
+	   jvirt_barray_ptr *dst_coef_arrays)
+/* Horizontal flip in general cropping case */
+{
+  JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, k, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JBLOCKROW src_row_ptr, dst_row_ptr;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Here we must output into a separate array because we can't touch
+   * different rows of a single virtual array simultaneously.  Otherwise,
+   * this is essentially the same as the routine above.
+   */
+  MCU_cols = srcinfo->output_width /
+    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      src_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	 dst_blk_y + y_crop_blocks,
+	 (JDIMENSION) compptr->v_samp_factor, FALSE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	dst_row_ptr = dst_buffer[offset_y];
+	src_row_ptr = src_buffer[offset_y];
+	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
+	  if (x_crop_blocks + dst_blk_x < comp_width) {
+	    /* Do the mirrorable blocks */
+	    dst_ptr = dst_row_ptr[dst_blk_x];
+	    src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+	    /* this unrolled loop doesn't need to know which row it's on... */
+	    for (k = 0; k < DCTSIZE2; k += 2) {
+	      *dst_ptr++ = *src_ptr++;	 /* copy even column */
+	      *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */
+	    }
+	  } else {
+	    /* Copy last partial block(s) verbatim */
+	    jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks,
+			    dst_row_ptr + dst_blk_x,
+			    (JDIMENSION) 1);
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	   JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	   jvirt_barray_ptr *src_coef_arrays,
+	   jvirt_barray_ptr *dst_coef_arrays)
+/* Vertical flip */
+{
+  JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JBLOCKROW src_row_ptr, dst_row_ptr;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* We output into a separate array because we can't touch different
+   * rows of the source virtual array simultaneously.  Otherwise, this
+   * is a pretty straightforward analog of horizontal flip.
+   * Within a DCT block, vertical mirroring is done by changing the signs
+   * of odd-numbered rows.
+   * Partial iMCUs at the bottom edge are copied verbatim.
+   */
+  MCU_rows = srcinfo->output_height /
+    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      if (y_crop_blocks + dst_blk_y < comp_height) {
+	/* Row is within the mirrorable area. */
+	src_buffer = (*srcinfo->mem->access_virt_barray)
+	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	   comp_height - y_crop_blocks - dst_blk_y -
+	   (JDIMENSION) compptr->v_samp_factor,
+	   (JDIMENSION) compptr->v_samp_factor, FALSE);
+      } else {
+	/* Bottom-edge blocks will be copied verbatim. */
+	src_buffer = (*srcinfo->mem->access_virt_barray)
+	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	   dst_blk_y + y_crop_blocks,
+	   (JDIMENSION) compptr->v_samp_factor, FALSE);
+      }
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	if (y_crop_blocks + dst_blk_y < comp_height) {
+	  /* Row is within the mirrorable area. */
+	  dst_row_ptr = dst_buffer[offset_y];
+	  src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
+	  src_row_ptr += x_crop_blocks;
+	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+	       dst_blk_x++) {
+	    dst_ptr = dst_row_ptr[dst_blk_x];
+	    src_ptr = src_row_ptr[dst_blk_x];
+	    for (i = 0; i < DCTSIZE; i += 2) {
+	      /* copy even row */
+	      for (j = 0; j < DCTSIZE; j++)
+		*dst_ptr++ = *src_ptr++;
+	      /* copy odd row with sign change */
+	      for (j = 0; j < DCTSIZE; j++)
+		*dst_ptr++ = - *src_ptr++;
+	    }
+	  }
+	} else {
+	  /* Just copy row verbatim. */
+	  jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
+			  dst_buffer[offset_y],
+			  compptr->width_in_blocks);
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	      JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	      jvirt_barray_ptr *src_coef_arrays,
+	      jvirt_barray_ptr *dst_coef_arrays)
+/* Transpose source into destination */
+{
+  JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_x, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Transposing pixels within a block just requires transposing the
+   * DCT coefficients.
+   * Partial iMCUs at the edges require no special treatment; we simply
+   * process all the available DCT blocks for every component.
+   */
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+	     dst_blk_x += compptr->h_samp_factor) {
+	  src_buffer = (*srcinfo->mem->access_virt_barray)
+	    ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	     dst_blk_x + x_crop_blocks,
+	     (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
+	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+	    src_ptr = src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks];
+	    for (i = 0; i < DCTSIZE; i++)
+	      for (j = 0; j < DCTSIZE; j++)
+		dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	   JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	   jvirt_barray_ptr *src_coef_arrays,
+	   jvirt_barray_ptr *dst_coef_arrays)
+/* 90 degree rotation is equivalent to
+ *   1. Transposing the image;
+ *   2. Horizontal mirroring.
+ * These two steps are merged into a single processing routine.
+ */
+{
+  JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_x, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Because of the horizontal mirror step, we can't process partial iMCUs
+   * at the (output) right edge properly.  They just get transposed and
+   * not mirrored.
+   */
+  MCU_cols = srcinfo->output_height /
+    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+	     dst_blk_x += compptr->h_samp_factor) {
+	  if (x_crop_blocks + dst_blk_x < comp_width) {
+	    /* Block is within the mirrorable area. */
+	    src_buffer = (*srcinfo->mem->access_virt_barray)
+	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	       comp_width - x_crop_blocks - dst_blk_x -
+	       (JDIMENSION) compptr->h_samp_factor,
+	       (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  } else {
+	    /* Edge blocks are transposed but not mirrored. */
+	    src_buffer = (*srcinfo->mem->access_virt_barray)
+	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	       dst_blk_x + x_crop_blocks,
+	       (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  }
+	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
+	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+	    if (x_crop_blocks + dst_blk_x < comp_width) {
+	      /* Block is within the mirrorable area. */
+	      src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+		[dst_blk_y + offset_y + y_crop_blocks];
+	      for (i = 0; i < DCTSIZE; i++) {
+		for (j = 0; j < DCTSIZE; j++)
+		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+		i++;
+		for (j = 0; j < DCTSIZE; j++)
+		  dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
+	      }
+	    } else {
+	      /* Edge blocks are transposed but not mirrored. */
+	      src_ptr = src_buffer[offset_x]
+		[dst_blk_y + offset_y + y_crop_blocks];
+	      for (i = 0; i < DCTSIZE; i++)
+		for (j = 0; j < DCTSIZE; j++)
+		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+	    }
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	    JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	    jvirt_barray_ptr *src_coef_arrays,
+	    jvirt_barray_ptr *dst_coef_arrays)
+/* 270 degree rotation is equivalent to
+ *   1. Horizontal mirroring;
+ *   2. Transposing the image.
+ * These two steps are merged into a single processing routine.
+ */
+{
+  JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_x, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Because of the horizontal mirror step, we can't process partial iMCUs
+   * at the (output) bottom edge properly.  They just get transposed and
+   * not mirrored.
+   */
+  MCU_rows = srcinfo->output_width /
+    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+	     dst_blk_x += compptr->h_samp_factor) {
+	  src_buffer = (*srcinfo->mem->access_virt_barray)
+	    ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	     dst_blk_x + x_crop_blocks,
+	     (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
+	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+	    if (y_crop_blocks + dst_blk_y < comp_height) {
+	      /* Block is within the mirrorable area. */
+	      src_ptr = src_buffer[offset_x]
+		[comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
+	      for (i = 0; i < DCTSIZE; i++) {
+		for (j = 0; j < DCTSIZE; j++) {
+		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+		  j++;
+		  dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
+		}
+	      }
+	    } else {
+	      /* Edge blocks are transposed but not mirrored. */
+	      src_ptr = src_buffer[offset_x]
+		[dst_blk_y + offset_y + y_crop_blocks];
+	      for (i = 0; i < DCTSIZE; i++)
+		for (j = 0; j < DCTSIZE; j++)
+		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+	    }
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	    JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	    jvirt_barray_ptr *src_coef_arrays,
+	    jvirt_barray_ptr *dst_coef_arrays)
+/* 180 degree rotation is equivalent to
+ *   1. Vertical mirroring;
+ *   2. Horizontal mirroring.
+ * These two steps are merged into a single processing routine.
+ */
+{
+  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JBLOCKROW src_row_ptr, dst_row_ptr;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  MCU_cols = srcinfo->output_width /
+    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
+  MCU_rows = srcinfo->output_height /
+    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      if (y_crop_blocks + dst_blk_y < comp_height) {
+	/* Row is within the vertically mirrorable area. */
+	src_buffer = (*srcinfo->mem->access_virt_barray)
+	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	   comp_height - y_crop_blocks - dst_blk_y -
+	   (JDIMENSION) compptr->v_samp_factor,
+	   (JDIMENSION) compptr->v_samp_factor, FALSE);
+      } else {
+	/* Bottom-edge rows are only mirrored horizontally. */
+	src_buffer = (*srcinfo->mem->access_virt_barray)
+	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	   dst_blk_y + y_crop_blocks,
+	   (JDIMENSION) compptr->v_samp_factor, FALSE);
+      }
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	dst_row_ptr = dst_buffer[offset_y];
+	if (y_crop_blocks + dst_blk_y < comp_height) {
+	  /* Row is within the mirrorable area. */
+	  src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
+	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
+	    dst_ptr = dst_row_ptr[dst_blk_x];
+	    if (x_crop_blocks + dst_blk_x < comp_width) {
+	      /* Process the blocks that can be mirrored both ways. */
+	      src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+	      for (i = 0; i < DCTSIZE; i += 2) {
+		/* For even row, negate every odd column. */
+		for (j = 0; j < DCTSIZE; j += 2) {
+		  *dst_ptr++ = *src_ptr++;
+		  *dst_ptr++ = - *src_ptr++;
+		}
+		/* For odd row, negate every even column. */
+		for (j = 0; j < DCTSIZE; j += 2) {
+		  *dst_ptr++ = - *src_ptr++;
+		  *dst_ptr++ = *src_ptr++;
+		}
+	      }
+	    } else {
+	      /* Any remaining right-edge blocks are only mirrored vertically. */
+	      src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x];
+	      for (i = 0; i < DCTSIZE; i += 2) {
+		for (j = 0; j < DCTSIZE; j++)
+		  *dst_ptr++ = *src_ptr++;
+		for (j = 0; j < DCTSIZE; j++)
+		  *dst_ptr++ = - *src_ptr++;
+	      }
+	    }
+	  }
+	} else {
+	  /* Remaining rows are just mirrored horizontally. */
+	  src_row_ptr = src_buffer[offset_y];
+	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
+	    if (x_crop_blocks + dst_blk_x < comp_width) {
+	      /* Process the blocks that can be mirrored. */
+	      dst_ptr = dst_row_ptr[dst_blk_x];
+	      src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+	      for (i = 0; i < DCTSIZE2; i += 2) {
+		*dst_ptr++ = *src_ptr++;
+		*dst_ptr++ = - *src_ptr++;
+	      }
+	    } else {
+	      /* Any remaining right-edge blocks are only copied. */
+	      jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks,
+			      dst_row_ptr + dst_blk_x,
+			      (JDIMENSION) 1);
+	    }
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	       JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	       jvirt_barray_ptr *src_coef_arrays,
+	       jvirt_barray_ptr *dst_coef_arrays)
+/* Transverse transpose is equivalent to
+ *   1. 180 degree rotation;
+ *   2. Transposition;
+ * or
+ *   1. Horizontal mirroring;
+ *   2. Transposition;
+ *   3. Horizontal mirroring.
+ * These steps are merged into a single processing routine.
+ */
+{
+  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_x, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  MCU_cols = srcinfo->output_height /
+    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
+  MCU_rows = srcinfo->output_width /
+    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+	     dst_blk_x += compptr->h_samp_factor) {
+	  if (x_crop_blocks + dst_blk_x < comp_width) {
+	    /* Block is within the mirrorable area. */
+	    src_buffer = (*srcinfo->mem->access_virt_barray)
+	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	       comp_width - x_crop_blocks - dst_blk_x -
+	       (JDIMENSION) compptr->h_samp_factor,
+	       (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  } else {
+	    src_buffer = (*srcinfo->mem->access_virt_barray)
+	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	       dst_blk_x + x_crop_blocks,
+	       (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  }
+	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
+	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+	    if (y_crop_blocks + dst_blk_y < comp_height) {
+	      if (x_crop_blocks + dst_blk_x < comp_width) {
+		/* Block is within the mirrorable area. */
+		src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+		  [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
+		for (i = 0; i < DCTSIZE; i++) {
+		  for (j = 0; j < DCTSIZE; j++) {
+		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+		    j++;
+		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
+		  }
+		  i++;
+		  for (j = 0; j < DCTSIZE; j++) {
+		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
+		    j++;
+		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+		  }
+		}
+	      } else {
+		/* Right-edge blocks are mirrored in y only */
+		src_ptr = src_buffer[offset_x]
+		  [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
+		for (i = 0; i < DCTSIZE; i++) {
+		  for (j = 0; j < DCTSIZE; j++) {
+		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+		    j++;
+		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
+		  }
+		}
+	      }
+	    } else {
+	      if (x_crop_blocks + dst_blk_x < comp_width) {
+		/* Bottom-edge blocks are mirrored in x only */
+		src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+		  [dst_blk_y + offset_y + y_crop_blocks];
+		for (i = 0; i < DCTSIZE; i++) {
+		  for (j = 0; j < DCTSIZE; j++)
+		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+		  i++;
+		  for (j = 0; j < DCTSIZE; j++)
+		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
+		}
+	      } else {
+		/* At lower right corner, just transpose, no mirroring */
+		src_ptr = src_buffer[offset_x]
+		  [dst_blk_y + offset_y + y_crop_blocks];
+		for (i = 0; i < DCTSIZE; i++)
+		  for (j = 0; j < DCTSIZE; j++)
+		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+	      }
+	    }
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec.
+ * Returns TRUE if valid integer found, FALSE if not.
+ * *strptr is advanced over the digit string, and *result is set to its value.
+ */
+
+LOCAL(boolean)
+jt_read_integer (const char ** strptr, JDIMENSION * result)
+{
+  const char * ptr = *strptr;
+  JDIMENSION val = 0;
+
+  for (; isdigit(*ptr); ptr++) {
+    val = val * 10 + (JDIMENSION) (*ptr - '0');
+  }
+  *result = val;
+  if (ptr == *strptr)
+    return FALSE;		/* oops, no digits */
+  *strptr = ptr;
+  return TRUE;
+}
+
+
+/* Parse a crop specification (written in X11 geometry style).
+ * The routine returns TRUE if the spec string is valid, FALSE if not.
+ *
+ * The crop spec string should have the format
+ *	<width>[f]x<height>[f]{+-}<xoffset>{+-}<yoffset>
+ * where width, height, xoffset, and yoffset are unsigned integers.
+ * Each of the elements can be omitted to indicate a default value.
+ * (A weakness of this style is that it is not possible to omit xoffset
+ * while specifying yoffset, since they look alike.)
+ *
+ * This code is loosely based on XParseGeometry from the X11 distribution.
+ */
+
+GLOBAL(boolean)
+jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec)
+{
+  info->crop = FALSE;
+  info->crop_width_set = JCROP_UNSET;
+  info->crop_height_set = JCROP_UNSET;
+  info->crop_xoffset_set = JCROP_UNSET;
+  info->crop_yoffset_set = JCROP_UNSET;
+
+  if (isdigit(*spec)) {
+    /* fetch width */
+    if (! jt_read_integer(&spec, &info->crop_width))
+      return FALSE;
+    if (*spec == 'f' || *spec == 'F') {
+      spec++;
+      info->crop_width_set = JCROP_FORCE;
+    } else
+      info->crop_width_set = JCROP_POS;
+  }
+  if (*spec == 'x' || *spec == 'X') {
+    /* fetch height */
+    spec++;
+    if (! jt_read_integer(&spec, &info->crop_height))
+      return FALSE;
+    if (*spec == 'f' || *spec == 'F') {
+      spec++;
+      info->crop_height_set = JCROP_FORCE;
+    } else
+      info->crop_height_set = JCROP_POS;
+  }
+  if (*spec == '+' || *spec == '-') {
+    /* fetch xoffset */
+    info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS;
+    spec++;
+    if (! jt_read_integer(&spec, &info->crop_xoffset))
+      return FALSE;
+  }
+  if (*spec == '+' || *spec == '-') {
+    /* fetch yoffset */
+    info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS;
+    spec++;
+    if (! jt_read_integer(&spec, &info->crop_yoffset))
+      return FALSE;
+  }
+  /* We had better have gotten to the end of the string. */
+  if (*spec != '\0')
+    return FALSE;
+  info->crop = TRUE;
+  return TRUE;
+}
+
+
+/* Trim off any partial iMCUs on the indicated destination edge */
+
+LOCAL(void)
+trim_right_edge (jpeg_transform_info *info, JDIMENSION full_width)
+{
+  JDIMENSION MCU_cols;
+
+  MCU_cols = info->output_width / info->iMCU_sample_width;
+  if (MCU_cols > 0 && info->x_crop_offset + MCU_cols ==
+      full_width / info->iMCU_sample_width)
+    info->output_width = MCU_cols * info->iMCU_sample_width;
+}
+
+LOCAL(void)
+trim_bottom_edge (jpeg_transform_info *info, JDIMENSION full_height)
+{
+  JDIMENSION MCU_rows;
+
+  MCU_rows = info->output_height / info->iMCU_sample_height;
+  if (MCU_rows > 0 && info->y_crop_offset + MCU_rows ==
+      full_height / info->iMCU_sample_height)
+    info->output_height = MCU_rows * info->iMCU_sample_height;
+}
+
+
+/* Request any required workspace.
+ *
+ * This routine figures out the size that the output image will be
+ * (which implies that all the transform parameters must be set before
+ * it is called).
+ *
+ * We allocate the workspace virtual arrays from the source decompression
+ * object, so that all the arrays (both the original data and the workspace)
+ * will be taken into account while making memory management decisions.
+ * Hence, this routine must be called after jpeg_read_header (which reads
+ * the image dimensions) and before jpeg_read_coefficients (which realizes
+ * the source's virtual arrays).
+ *
+ * This function returns FALSE right away if -perfect is given
+ * and transformation is not perfect.  Otherwise returns TRUE.
+ */
+
+GLOBAL(boolean)
+jtransform_request_workspace (j_decompress_ptr srcinfo,
+			      jpeg_transform_info *info)
+{
+  jvirt_barray_ptr *coef_arrays;
+  boolean need_workspace, transpose_it;
+  jpeg_component_info *compptr;
+  JDIMENSION xoffset, yoffset;
+  JDIMENSION width_in_iMCUs, height_in_iMCUs;
+  JDIMENSION width_in_blocks, height_in_blocks;
+  int ci, h_samp_factor, v_samp_factor;
+
+  /* Determine number of components in output image */
+  if (info->force_grayscale &&
+      srcinfo->jpeg_color_space == JCS_YCbCr &&
+      srcinfo->num_components == 3)
+    /* We'll only process the first component */
+    info->num_components = 1;
+  else
+    /* Process all the components */
+    info->num_components = srcinfo->num_components;
+
+  /* Compute output image dimensions and related values. */
+  jpeg_core_output_dimensions(srcinfo);
+
+  /* Return right away if -perfect is given and transformation is not perfect.
+   */
+  if (info->perfect) {
+    if (info->num_components == 1) {
+      if (!jtransform_perfect_transform(srcinfo->output_width,
+	  srcinfo->output_height,
+	  srcinfo->min_DCT_h_scaled_size,
+	  srcinfo->min_DCT_v_scaled_size,
+	  info->transform))
+	return FALSE;
+    } else {
+      if (!jtransform_perfect_transform(srcinfo->output_width,
+	  srcinfo->output_height,
+	  srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size,
+	  srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size,
+	  info->transform))
+	return FALSE;
+    }
+  }
+
+  /* If there is only one output component, force the iMCU size to be 1;
+   * else use the source iMCU size.  (This allows us to do the right thing
+   * when reducing color to grayscale, and also provides a handy way of
+   * cleaning up "funny" grayscale images whose sampling factors are not 1x1.)
+   */
+  switch (info->transform) {
+  case JXFORM_TRANSPOSE:
+  case JXFORM_TRANSVERSE:
+  case JXFORM_ROT_90:
+  case JXFORM_ROT_270:
+    info->output_width = srcinfo->output_height;
+    info->output_height = srcinfo->output_width;
+    if (info->num_components == 1) {
+      info->iMCU_sample_width = srcinfo->min_DCT_v_scaled_size;
+      info->iMCU_sample_height = srcinfo->min_DCT_h_scaled_size;
+    } else {
+      info->iMCU_sample_width =
+	srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size;
+      info->iMCU_sample_height =
+	srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size;
+    }
+    break;
+  default:
+    info->output_width = srcinfo->output_width;
+    info->output_height = srcinfo->output_height;
+    if (info->num_components == 1) {
+      info->iMCU_sample_width = srcinfo->min_DCT_h_scaled_size;
+      info->iMCU_sample_height = srcinfo->min_DCT_v_scaled_size;
+    } else {
+      info->iMCU_sample_width =
+	srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size;
+      info->iMCU_sample_height =
+	srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size;
+    }
+    break;
+  }
+
+  /* If cropping has been requested, compute the crop area's position and
+   * dimensions, ensuring that its upper left corner falls at an iMCU boundary.
+   */
+  if (info->crop) {
+    /* Insert default values for unset crop parameters */
+    if (info->crop_xoffset_set == JCROP_UNSET)
+      info->crop_xoffset = 0;	/* default to +0 */
+    if (info->crop_yoffset_set == JCROP_UNSET)
+      info->crop_yoffset = 0;	/* default to +0 */
+    if (info->crop_xoffset >= info->output_width ||
+	info->crop_yoffset >= info->output_height)
+      ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+    if (info->crop_width_set == JCROP_UNSET)
+      info->crop_width = info->output_width - info->crop_xoffset;
+    if (info->crop_height_set == JCROP_UNSET)
+      info->crop_height = info->output_height - info->crop_yoffset;
+    /* Ensure parameters are valid */
+    if (info->crop_width <= 0 || info->crop_width > info->output_width ||
+	info->crop_height <= 0 || info->crop_height > info->output_height ||
+	info->crop_xoffset > info->output_width - info->crop_width ||
+	info->crop_yoffset > info->output_height - info->crop_height)
+      ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+    /* Convert negative crop offsets into regular offsets */
+    if (info->crop_xoffset_set == JCROP_NEG)
+      xoffset = info->output_width - info->crop_width - info->crop_xoffset;
+    else
+      xoffset = info->crop_xoffset;
+    if (info->crop_yoffset_set == JCROP_NEG)
+      yoffset = info->output_height - info->crop_height - info->crop_yoffset;
+    else
+      yoffset = info->crop_yoffset;
+    /* Now adjust so that upper left corner falls at an iMCU boundary */
+    if (info->crop_width_set == JCROP_FORCE)
+      info->output_width = info->crop_width;
+    else
+      info->output_width =
+        info->crop_width + (xoffset % info->iMCU_sample_width);
+    if (info->crop_height_set == JCROP_FORCE)
+      info->output_height = info->crop_height;
+    else
+      info->output_height =
+        info->crop_height + (yoffset % info->iMCU_sample_height);
+    /* Save x/y offsets measured in iMCUs */
+    info->x_crop_offset = xoffset / info->iMCU_sample_width;
+    info->y_crop_offset = yoffset / info->iMCU_sample_height;
+  } else {
+    info->x_crop_offset = 0;
+    info->y_crop_offset = 0;
+  }
+
+  /* Figure out whether we need workspace arrays,
+   * and if so whether they are transposed relative to the source.
+   */
+  need_workspace = FALSE;
+  transpose_it = FALSE;
+  switch (info->transform) {
+  case JXFORM_NONE:
+    if (info->x_crop_offset != 0 || info->y_crop_offset != 0)
+      need_workspace = TRUE;
+    /* No workspace needed if neither cropping nor transforming */
+    break;
+  case JXFORM_FLIP_H:
+    if (info->trim)
+      trim_right_edge(info, srcinfo->output_width);
+    if (info->y_crop_offset != 0)
+      need_workspace = TRUE;
+    /* do_flip_h_no_crop doesn't need a workspace array */
+    break;
+  case JXFORM_FLIP_V:
+    if (info->trim)
+      trim_bottom_edge(info, srcinfo->output_height);
+    /* Need workspace arrays having same dimensions as source image. */
+    need_workspace = TRUE;
+    break;
+  case JXFORM_TRANSPOSE:
+    /* transpose does NOT have to trim anything */
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  case JXFORM_TRANSVERSE:
+    if (info->trim) {
+      trim_right_edge(info, srcinfo->output_height);
+      trim_bottom_edge(info, srcinfo->output_width);
+    }
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  case JXFORM_ROT_90:
+    if (info->trim)
+      trim_right_edge(info, srcinfo->output_height);
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  case JXFORM_ROT_180:
+    if (info->trim) {
+      trim_right_edge(info, srcinfo->output_width);
+      trim_bottom_edge(info, srcinfo->output_height);
+    }
+    /* Need workspace arrays having same dimensions as source image. */
+    need_workspace = TRUE;
+    break;
+  case JXFORM_ROT_270:
+    if (info->trim)
+      trim_bottom_edge(info, srcinfo->output_width);
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  }
+
+  /* Allocate workspace if needed.
+   * Note that we allocate arrays padded out to the next iMCU boundary,
+   * so that transform routines need not worry about missing edge blocks.
+   */
+  if (need_workspace) {
+    coef_arrays = (jvirt_barray_ptr *)
+      (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE,
+		SIZEOF(jvirt_barray_ptr) * info->num_components);
+    width_in_iMCUs = (JDIMENSION)
+      jdiv_round_up((long) info->output_width,
+		    (long) info->iMCU_sample_width);
+    height_in_iMCUs = (JDIMENSION)
+      jdiv_round_up((long) info->output_height,
+		    (long) info->iMCU_sample_height);
+    for (ci = 0; ci < info->num_components; ci++) {
+      compptr = srcinfo->comp_info + ci;
+      if (info->num_components == 1) {
+	/* we're going to force samp factors to 1x1 in this case */
+	h_samp_factor = v_samp_factor = 1;
+      } else if (transpose_it) {
+	h_samp_factor = compptr->v_samp_factor;
+	v_samp_factor = compptr->h_samp_factor;
+      } else {
+	h_samp_factor = compptr->h_samp_factor;
+	v_samp_factor = compptr->v_samp_factor;
+      }
+      width_in_blocks = width_in_iMCUs * h_samp_factor;
+      height_in_blocks = height_in_iMCUs * v_samp_factor;
+      coef_arrays[ci] = (*srcinfo->mem->request_virt_barray)
+	((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE,
+	 width_in_blocks, height_in_blocks, (JDIMENSION) v_samp_factor);
+    }
+    info->workspace_coef_arrays = coef_arrays;
+  } else
+    info->workspace_coef_arrays = NULL;
+
+  return TRUE;
+}
+
+
+/* Transpose destination image parameters */
+
+LOCAL(void)
+transpose_critical_parameters (j_compress_ptr dstinfo)
+{
+  int tblno, i, j, ci, itemp;
+  jpeg_component_info *compptr;
+  JQUANT_TBL *qtblptr;
+  JDIMENSION jtemp;
+  UINT16 qtemp;
+
+  /* Transpose image dimensions */
+  jtemp = dstinfo->image_width;
+  dstinfo->image_width = dstinfo->image_height;
+  dstinfo->image_height = jtemp;
+  itemp = dstinfo->min_DCT_h_scaled_size;
+  dstinfo->min_DCT_h_scaled_size = dstinfo->min_DCT_v_scaled_size;
+  dstinfo->min_DCT_v_scaled_size = itemp;
+
+  /* Transpose sampling factors */
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    itemp = compptr->h_samp_factor;
+    compptr->h_samp_factor = compptr->v_samp_factor;
+    compptr->v_samp_factor = itemp;
+  }
+
+  /* Transpose quantization tables */
+  for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
+    qtblptr = dstinfo->quant_tbl_ptrs[tblno];
+    if (qtblptr != NULL) {
+      for (i = 0; i < DCTSIZE; i++) {
+	for (j = 0; j < i; j++) {
+	  qtemp = qtblptr->quantval[i*DCTSIZE+j];
+	  qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i];
+	  qtblptr->quantval[j*DCTSIZE+i] = qtemp;
+	}
+      }
+    }
+  }
+}
+
+
+/* Adjust Exif image parameters.
+ *
+ * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible.
+ */
+
+LOCAL(void)
+adjust_exif_parameters (JOCTET FAR * data, unsigned int length,
+			JDIMENSION new_width, JDIMENSION new_height)
+{
+  boolean is_motorola; /* Flag for byte order */
+  unsigned int number_of_tags, tagnum;
+  unsigned int firstoffset, offset;
+  JDIMENSION new_value;
+
+  if (length < 12) return; /* Length of an IFD entry */
+
+  /* Discover byte order */
+  if (GETJOCTET(data[0]) == 0x49 && GETJOCTET(data[1]) == 0x49)
+    is_motorola = FALSE;
+  else if (GETJOCTET(data[0]) == 0x4D && GETJOCTET(data[1]) == 0x4D)
+    is_motorola = TRUE;
+  else
+    return;
+
+  /* Check Tag Mark */
+  if (is_motorola) {
+    if (GETJOCTET(data[2]) != 0) return;
+    if (GETJOCTET(data[3]) != 0x2A) return;
+  } else {
+    if (GETJOCTET(data[3]) != 0) return;
+    if (GETJOCTET(data[2]) != 0x2A) return;
+  }
+
+  /* Get first IFD offset (offset to IFD0) */
+  if (is_motorola) {
+    if (GETJOCTET(data[4]) != 0) return;
+    if (GETJOCTET(data[5]) != 0) return;
+    firstoffset = GETJOCTET(data[6]);
+    firstoffset <<= 8;
+    firstoffset += GETJOCTET(data[7]);
+  } else {
+    if (GETJOCTET(data[7]) != 0) return;
+    if (GETJOCTET(data[6]) != 0) return;
+    firstoffset = GETJOCTET(data[5]);
+    firstoffset <<= 8;
+    firstoffset += GETJOCTET(data[4]);
+  }
+  if (firstoffset > length - 2) return; /* check end of data segment */
+
+  /* Get the number of directory entries contained in this IFD */
+  if (is_motorola) {
+    number_of_tags = GETJOCTET(data[firstoffset]);
+    number_of_tags <<= 8;
+    number_of_tags += GETJOCTET(data[firstoffset+1]);
+  } else {
+    number_of_tags = GETJOCTET(data[firstoffset+1]);
+    number_of_tags <<= 8;
+    number_of_tags += GETJOCTET(data[firstoffset]);
+  }
+  if (number_of_tags == 0) return;
+  firstoffset += 2;
+
+  /* Search for ExifSubIFD offset Tag in IFD0 */
+  for (;;) {
+    if (firstoffset > length - 12) return; /* check end of data segment */
+    /* Get Tag number */
+    if (is_motorola) {
+      tagnum = GETJOCTET(data[firstoffset]);
+      tagnum <<= 8;
+      tagnum += GETJOCTET(data[firstoffset+1]);
+    } else {
+      tagnum = GETJOCTET(data[firstoffset+1]);
+      tagnum <<= 8;
+      tagnum += GETJOCTET(data[firstoffset]);
+    }
+    if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */
+    if (--number_of_tags == 0) return;
+    firstoffset += 12;
+  }
+
+  /* Get the ExifSubIFD offset */
+  if (is_motorola) {
+    if (GETJOCTET(data[firstoffset+8]) != 0) return;
+    if (GETJOCTET(data[firstoffset+9]) != 0) return;
+    offset = GETJOCTET(data[firstoffset+10]);
+    offset <<= 8;
+    offset += GETJOCTET(data[firstoffset+11]);
+  } else {
+    if (GETJOCTET(data[firstoffset+11]) != 0) return;
+    if (GETJOCTET(data[firstoffset+10]) != 0) return;
+    offset = GETJOCTET(data[firstoffset+9]);
+    offset <<= 8;
+    offset += GETJOCTET(data[firstoffset+8]);
+  }
+  if (offset > length - 2) return; /* check end of data segment */
+
+  /* Get the number of directory entries contained in this SubIFD */
+  if (is_motorola) {
+    number_of_tags = GETJOCTET(data[offset]);
+    number_of_tags <<= 8;
+    number_of_tags += GETJOCTET(data[offset+1]);
+  } else {
+    number_of_tags = GETJOCTET(data[offset+1]);
+    number_of_tags <<= 8;
+    number_of_tags += GETJOCTET(data[offset]);
+  }
+  if (number_of_tags < 2) return;
+  offset += 2;
+
+  /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */
+  do {
+    if (offset > length - 12) return; /* check end of data segment */
+    /* Get Tag number */
+    if (is_motorola) {
+      tagnum = GETJOCTET(data[offset]);
+      tagnum <<= 8;
+      tagnum += GETJOCTET(data[offset+1]);
+    } else {
+      tagnum = GETJOCTET(data[offset+1]);
+      tagnum <<= 8;
+      tagnum += GETJOCTET(data[offset]);
+    }
+    if (tagnum == 0xA002 || tagnum == 0xA003) {
+      if (tagnum == 0xA002)
+	new_value = new_width; /* ExifImageWidth Tag */
+      else
+	new_value = new_height; /* ExifImageHeight Tag */
+      if (is_motorola) {
+	data[offset+2] = 0; /* Format = unsigned long (4 octets) */
+	data[offset+3] = 4;
+	data[offset+4] = 0; /* Number Of Components = 1 */
+	data[offset+5] = 0;
+	data[offset+6] = 0;
+	data[offset+7] = 1;
+	data[offset+8] = 0;
+	data[offset+9] = 0;
+	data[offset+10] = (JOCTET)((new_value >> 8) & 0xFF);
+	data[offset+11] = (JOCTET)(new_value & 0xFF);
+      } else {
+	data[offset+2] = 4; /* Format = unsigned long (4 octets) */
+	data[offset+3] = 0;
+	data[offset+4] = 1; /* Number Of Components = 1 */
+	data[offset+5] = 0;
+	data[offset+6] = 0;
+	data[offset+7] = 0;
+	data[offset+8] = (JOCTET)(new_value & 0xFF);
+	data[offset+9] = (JOCTET)((new_value >> 8) & 0xFF);
+	data[offset+10] = 0;
+	data[offset+11] = 0;
+      }
+    }
+    offset += 12;
+  } while (--number_of_tags);
+}
+
+
+/* Adjust output image parameters as needed.
+ *
+ * This must be called after jpeg_copy_critical_parameters()
+ * and before jpeg_write_coefficients().
+ *
+ * The return value is the set of virtual coefficient arrays to be written
+ * (either the ones allocated by jtransform_request_workspace, or the
+ * original source data arrays).  The caller will need to pass this value
+ * to jpeg_write_coefficients().
+ */
+
+GLOBAL(jvirt_barray_ptr *)
+jtransform_adjust_parameters (j_decompress_ptr srcinfo,
+			      j_compress_ptr dstinfo,
+			      jvirt_barray_ptr *src_coef_arrays,
+			      jpeg_transform_info *info)
+{
+  /* If force-to-grayscale is requested, adjust destination parameters */
+  if (info->force_grayscale) {
+    /* First, ensure we have YCbCr or grayscale data, and that the source's
+     * Y channel is full resolution.  (No reasonable person would make Y
+     * be less than full resolution, so actually coping with that case
+     * isn't worth extra code space.  But we check it to avoid crashing.)
+     */
+    if (((dstinfo->jpeg_color_space == JCS_YCbCr &&
+	  dstinfo->num_components == 3) ||
+	 (dstinfo->jpeg_color_space == JCS_GRAYSCALE &&
+	  dstinfo->num_components == 1)) &&
+	srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor &&
+	srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) {
+      /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed
+       * properly.  Among other things, it sets the target h_samp_factor &
+       * v_samp_factor to 1, which typically won't match the source.
+       * We have to preserve the source's quantization table number, however.
+       */
+      int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no;
+      jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE);
+      dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no;
+    } else {
+      /* Sorry, can't do it */
+      ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL);
+    }
+  } else if (info->num_components == 1) {
+    /* For a single-component source, we force the destination sampling factors
+     * to 1x1, with or without force_grayscale.  This is useful because some
+     * decoders choke on grayscale images with other sampling factors.
+     */
+    dstinfo->comp_info[0].h_samp_factor = 1;
+    dstinfo->comp_info[0].v_samp_factor = 1;
+  }
+
+  /* Correct the destination's image dimensions as necessary
+   * for rotate/flip, resize, and crop operations.
+   */
+  dstinfo->jpeg_width = info->output_width;
+  dstinfo->jpeg_height = info->output_height;
+
+  /* Transpose destination image parameters */
+  switch (info->transform) {
+  case JXFORM_TRANSPOSE:
+  case JXFORM_TRANSVERSE:
+  case JXFORM_ROT_90:
+  case JXFORM_ROT_270:
+    transpose_critical_parameters(dstinfo);
+    break;
+  default:
+    break;
+  }
+
+  /* Adjust Exif properties */
+  if (srcinfo->marker_list != NULL &&
+      srcinfo->marker_list->marker == JPEG_APP0+1 &&
+      srcinfo->marker_list->data_length >= 6 &&
+      GETJOCTET(srcinfo->marker_list->data[0]) == 0x45 &&
+      GETJOCTET(srcinfo->marker_list->data[1]) == 0x78 &&
+      GETJOCTET(srcinfo->marker_list->data[2]) == 0x69 &&
+      GETJOCTET(srcinfo->marker_list->data[3]) == 0x66 &&
+      GETJOCTET(srcinfo->marker_list->data[4]) == 0 &&
+      GETJOCTET(srcinfo->marker_list->data[5]) == 0) {
+    /* Suppress output of JFIF marker */
+    dstinfo->write_JFIF_header = FALSE;
+    /* Adjust Exif image parameters */
+    if (dstinfo->jpeg_width != srcinfo->image_width ||
+	dstinfo->jpeg_height != srcinfo->image_height)
+      /* Align data segment to start of TIFF structure for parsing */
+      adjust_exif_parameters(srcinfo->marker_list->data + 6,
+	srcinfo->marker_list->data_length - 6,
+	dstinfo->jpeg_width, dstinfo->jpeg_height);
+  }
+
+  /* Return the appropriate output data set */
+  if (info->workspace_coef_arrays != NULL)
+    return info->workspace_coef_arrays;
+  return src_coef_arrays;
+}
+
+
+/* Execute the actual transformation, if any.
+ *
+ * This must be called *after* jpeg_write_coefficients, because it depends
+ * on jpeg_write_coefficients to have computed subsidiary values such as
+ * the per-component width and height fields in the destination object.
+ *
+ * Note that some transformations will modify the source data arrays!
+ */
+
+GLOBAL(void)
+jtransform_execute_transform (j_decompress_ptr srcinfo,
+			      j_compress_ptr dstinfo,
+			      jvirt_barray_ptr *src_coef_arrays,
+			      jpeg_transform_info *info)
+{
+  jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays;
+
+  /* Note: conditions tested here should match those in switch statement
+   * in jtransform_request_workspace()
+   */
+  switch (info->transform) {
+  case JXFORM_NONE:
+    if (info->x_crop_offset != 0 || info->y_crop_offset != 0)
+      do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	      src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_FLIP_H:
+    if (info->y_crop_offset != 0)
+      do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+		src_coef_arrays, dst_coef_arrays);
+    else
+      do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset,
+			src_coef_arrays);
+    break;
+  case JXFORM_FLIP_V:
+    do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	      src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_TRANSPOSE:
+    do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+		 src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_TRANSVERSE:
+    do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+		  src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_ROT_90:
+    do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	      src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_ROT_180:
+    do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	       src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_ROT_270:
+    do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	       src_coef_arrays, dst_coef_arrays);
+    break;
+  }
+}
+
+/* jtransform_perfect_transform
+ *
+ * Determine whether lossless transformation is perfectly
+ * possible for a specified image and transformation.
+ *
+ * Inputs:
+ *   image_width, image_height: source image dimensions.
+ *   MCU_width, MCU_height: pixel dimensions of MCU.
+ *   transform: transformation identifier.
+ * Parameter sources from initialized jpeg_struct
+ * (after reading source header):
+ *   image_width = cinfo.image_width
+ *   image_height = cinfo.image_height
+ *   MCU_width = cinfo.max_h_samp_factor * cinfo.block_size
+ *   MCU_height = cinfo.max_v_samp_factor * cinfo.block_size
+ * Result:
+ *   TRUE = perfect transformation possible
+ *   FALSE = perfect transformation not possible
+ *           (may use custom action then)
+ */
+
+GLOBAL(boolean)
+jtransform_perfect_transform(JDIMENSION image_width, JDIMENSION image_height,
+			     int MCU_width, int MCU_height,
+			     JXFORM_CODE transform)
+{
+  boolean result = TRUE; /* initialize TRUE */
+
+  switch (transform) {
+  case JXFORM_FLIP_H:
+  case JXFORM_ROT_270:
+    if (image_width % (JDIMENSION) MCU_width)
+      result = FALSE;
+    break;
+  case JXFORM_FLIP_V:
+  case JXFORM_ROT_90:
+    if (image_height % (JDIMENSION) MCU_height)
+      result = FALSE;
+    break;
+  case JXFORM_TRANSVERSE:
+  case JXFORM_ROT_180:
+    if (image_width % (JDIMENSION) MCU_width)
+      result = FALSE;
+    if (image_height % (JDIMENSION) MCU_height)
+      result = FALSE;
+    break;
+  default:
+    break;
+  }
+
+  return result;
+}
+
+#endif /* TRANSFORMS_SUPPORTED */
+
+
+/* Setup decompression object to save desired markers in memory.
+ * This must be called before jpeg_read_header() to have the desired effect.
+ */
+
+GLOBAL(void)
+jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option)
+{
+#ifdef SAVE_MARKERS_SUPPORTED
+  int m;
+
+  /* Save comments except under NONE option */
+  if (option != JCOPYOPT_NONE) {
+    jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF);
+  }
+  /* Save all types of APPn markers iff ALL option */
+  if (option == JCOPYOPT_ALL) {
+    for (m = 0; m < 16; m++)
+      jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF);
+  }
+#endif /* SAVE_MARKERS_SUPPORTED */
+}
+
+/* Copy markers saved in the given source object to the destination object.
+ * This should be called just after jpeg_start_compress() or
+ * jpeg_write_coefficients().
+ * Note that those routines will have written the SOI, and also the
+ * JFIF APP0 or Adobe APP14 markers if selected.
+ */
+
+GLOBAL(void)
+jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+		       JCOPY_OPTION option)
+{
+  jpeg_saved_marker_ptr marker;
+
+  /* In the current implementation, we don't actually need to examine the
+   * option flag here; we just copy everything that got saved.
+   * But to avoid confusion, we do not output JFIF and Adobe APP14 markers
+   * if the encoder library already wrote one.
+   */
+  for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) {
+    if (dstinfo->write_JFIF_header &&
+	marker->marker == JPEG_APP0 &&
+	marker->data_length >= 5 &&
+	GETJOCTET(marker->data[0]) == 0x4A &&
+	GETJOCTET(marker->data[1]) == 0x46 &&
+	GETJOCTET(marker->data[2]) == 0x49 &&
+	GETJOCTET(marker->data[3]) == 0x46 &&
+	GETJOCTET(marker->data[4]) == 0)
+      continue;			/* reject duplicate JFIF */
+    if (dstinfo->write_Adobe_marker &&
+	marker->marker == JPEG_APP0+14 &&
+	marker->data_length >= 5 &&
+	GETJOCTET(marker->data[0]) == 0x41 &&
+	GETJOCTET(marker->data[1]) == 0x64 &&
+	GETJOCTET(marker->data[2]) == 0x6F &&
+	GETJOCTET(marker->data[3]) == 0x62 &&
+	GETJOCTET(marker->data[4]) == 0x65)
+      continue;			/* reject duplicate Adobe */
+#ifdef NEED_FAR_POINTERS
+    /* We could use jpeg_write_marker if the data weren't FAR... */
+    {
+      unsigned int i;
+      jpeg_write_m_header(dstinfo, marker->marker, marker->data_length);
+      for (i = 0; i < marker->data_length; i++)
+	jpeg_write_m_byte(dstinfo, marker->data[i]);
+    }
+#else
+    jpeg_write_marker(dstinfo, marker->marker,
+		      marker->data, marker->data_length);
+#endif
+  }
+}
diff --git a/jpeg-8d/transupp.h b/jpeg-8d/transupp.h
new file mode 100644
index 0000000..9aa0af3
--- /dev/null
+++ b/jpeg-8d/transupp.h
@@ -0,0 +1,213 @@
+/*
+ * transupp.h
+ *
+ * Copyright (C) 1997-2011, Thomas G. Lane, Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains declarations for image transformation routines and
+ * other utility code used by the jpegtran sample application.  These are
+ * NOT part of the core JPEG library.  But we keep these routines separate
+ * from jpegtran.c to ease the task of maintaining jpegtran-like programs
+ * that have other user interfaces.
+ *
+ * NOTE: all the routines declared here have very specific requirements
+ * about when they are to be executed during the reading and writing of the
+ * source and destination files.  See the comments in transupp.c, or see
+ * jpegtran.c for an example of correct usage.
+ */
+
+/* If you happen not to want the image transform support, disable it here */
+#ifndef TRANSFORMS_SUPPORTED
+#define TRANSFORMS_SUPPORTED 1		/* 0 disables transform code */
+#endif
+
+/*
+ * Although rotating and flipping data expressed as DCT coefficients is not
+ * hard, there is an asymmetry in the JPEG format specification for images
+ * whose dimensions aren't multiples of the iMCU size.  The right and bottom
+ * image edges are padded out to the next iMCU boundary with junk data; but
+ * no padding is possible at the top and left edges.  If we were to flip
+ * the whole image including the pad data, then pad garbage would become
+ * visible at the top and/or left, and real pixels would disappear into the
+ * pad margins --- perhaps permanently, since encoders & decoders may not
+ * bother to preserve DCT blocks that appear to be completely outside the
+ * nominal image area.  So, we have to exclude any partial iMCUs from the
+ * basic transformation.
+ *
+ * Transpose is the only transformation that can handle partial iMCUs at the
+ * right and bottom edges completely cleanly.  flip_h can flip partial iMCUs
+ * at the bottom, but leaves any partial iMCUs at the right edge untouched.
+ * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched.
+ * The other transforms are defined as combinations of these basic transforms
+ * and process edge blocks in a way that preserves the equivalence.
+ *
+ * The "trim" option causes untransformable partial iMCUs to be dropped;
+ * this is not strictly lossless, but it usually gives the best-looking
+ * result for odd-size images.  Note that when this option is active,
+ * the expected mathematical equivalences between the transforms may not hold.
+ * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim
+ * followed by -rot 180 -trim trims both edges.)
+ *
+ * We also offer a lossless-crop option, which discards data outside a given
+ * image region but losslessly preserves what is inside.  Like the rotate and
+ * flip transforms, lossless crop is restricted by the JPEG format: the upper
+ * left corner of the selected region must fall on an iMCU boundary.  If this
+ * does not hold for the given crop parameters, we silently move the upper left
+ * corner up and/or left to make it so, simultaneously increasing the region
+ * dimensions to keep the lower right crop corner unchanged.  (Thus, the
+ * output image covers at least the requested region, but may cover more.)
+ * The adjustment of the region dimensions may be optionally disabled.
+ *
+ * We also provide a lossless-resize option, which is kind of a lossless-crop
+ * operation in the DCT coefficient block domain - it discards higher-order
+ * coefficients and losslessly preserves lower-order coefficients of a
+ * sub-block.
+ *
+ * Rotate/flip transform, resize, and crop can be requested together in a
+ * single invocation.  The crop is applied last --- that is, the crop region
+ * is specified in terms of the destination image after transform/resize.
+ *
+ * We also offer a "force to grayscale" option, which simply discards the
+ * chrominance channels of a YCbCr image.  This is lossless in the sense that
+ * the luminance channel is preserved exactly.  It's not the same kind of
+ * thing as the rotate/flip transformations, but it's convenient to handle it
+ * as part of this package, mainly because the transformation routines have to
+ * be aware of the option to know how many components to work on.
+ */
+
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jtransform_parse_crop_spec	jTrParCrop
+#define jtransform_request_workspace	jTrRequest
+#define jtransform_adjust_parameters	jTrAdjust
+#define jtransform_execute_transform	jTrExec
+#define jtransform_perfect_transform	jTrPerfect
+#define jcopy_markers_setup		jCMrkSetup
+#define jcopy_markers_execute		jCMrkExec
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+
+/*
+ * Codes for supported types of image transformations.
+ */
+
+typedef enum {
+	JXFORM_NONE,		/* no transformation */
+	JXFORM_FLIP_H,		/* horizontal flip */
+	JXFORM_FLIP_V,		/* vertical flip */
+	JXFORM_TRANSPOSE,	/* transpose across UL-to-LR axis */
+	JXFORM_TRANSVERSE,	/* transpose across UR-to-LL axis */
+	JXFORM_ROT_90,		/* 90-degree clockwise rotation */
+	JXFORM_ROT_180,		/* 180-degree rotation */
+	JXFORM_ROT_270		/* 270-degree clockwise (or 90 ccw) */
+} JXFORM_CODE;
+
+/*
+ * Codes for crop parameters, which can individually be unspecified,
+ * positive or negative for xoffset or yoffset,
+ * positive or forced for width or height.
+ */
+
+typedef enum {
+        JCROP_UNSET,
+        JCROP_POS,
+        JCROP_NEG,
+        JCROP_FORCE
+} JCROP_CODE;
+
+/*
+ * Transform parameters struct.
+ * NB: application must not change any elements of this struct after
+ * calling jtransform_request_workspace.
+ */
+
+typedef struct {
+  /* Options: set by caller */
+  JXFORM_CODE transform;	/* image transform operator */
+  boolean perfect;		/* if TRUE, fail if partial MCUs are requested */
+  boolean trim;			/* if TRUE, trim partial MCUs as needed */
+  boolean force_grayscale;	/* if TRUE, convert color image to grayscale */
+  boolean crop;			/* if TRUE, crop source image */
+
+  /* Crop parameters: application need not set these unless crop is TRUE.
+   * These can be filled in by jtransform_parse_crop_spec().
+   */
+  JDIMENSION crop_width;	/* Width of selected region */
+  JCROP_CODE crop_width_set;	/* (forced disables adjustment) */
+  JDIMENSION crop_height;	/* Height of selected region */
+  JCROP_CODE crop_height_set;	/* (forced disables adjustment) */
+  JDIMENSION crop_xoffset;	/* X offset of selected region */
+  JCROP_CODE crop_xoffset_set;	/* (negative measures from right edge) */
+  JDIMENSION crop_yoffset;	/* Y offset of selected region */
+  JCROP_CODE crop_yoffset_set;	/* (negative measures from bottom edge) */
+
+  /* Internal workspace: caller should not touch these */
+  int num_components;		/* # of components in workspace */
+  jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */
+  JDIMENSION output_width;	/* cropped destination dimensions */
+  JDIMENSION output_height;
+  JDIMENSION x_crop_offset;	/* destination crop offsets measured in iMCUs */
+  JDIMENSION y_crop_offset;
+  int iMCU_sample_width;	/* destination iMCU size */
+  int iMCU_sample_height;
+} jpeg_transform_info;
+
+
+#if TRANSFORMS_SUPPORTED
+
+/* Parse a crop specification (written in X11 geometry style) */
+EXTERN(boolean) jtransform_parse_crop_spec
+	JPP((jpeg_transform_info *info, const char *spec));
+/* Request any required workspace */
+EXTERN(boolean) jtransform_request_workspace
+	JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info));
+/* Adjust output image parameters */
+EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters
+	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	     jvirt_barray_ptr *src_coef_arrays,
+	     jpeg_transform_info *info));
+/* Execute the actual transformation, if any */
+EXTERN(void) jtransform_execute_transform
+	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	     jvirt_barray_ptr *src_coef_arrays,
+	     jpeg_transform_info *info));
+/* Determine whether lossless transformation is perfectly
+ * possible for a specified image and transformation.
+ */
+EXTERN(boolean) jtransform_perfect_transform
+	JPP((JDIMENSION image_width, JDIMENSION image_height,
+	     int MCU_width, int MCU_height,
+	     JXFORM_CODE transform));
+
+/* jtransform_execute_transform used to be called
+ * jtransform_execute_transformation, but some compilers complain about
+ * routine names that long.  This macro is here to avoid breaking any
+ * old source code that uses the original name...
+ */
+#define jtransform_execute_transformation	jtransform_execute_transform
+
+#endif /* TRANSFORMS_SUPPORTED */
+
+
+/*
+ * Support for copying optional markers from source to destination file.
+ */
+
+typedef enum {
+	JCOPYOPT_NONE,		/* copy no optional markers */
+	JCOPYOPT_COMMENTS,	/* copy only comment (COM) markers */
+	JCOPYOPT_ALL		/* copy all optional markers */
+} JCOPY_OPTION;
+
+#define JCOPYOPT_DEFAULT  JCOPYOPT_COMMENTS	/* recommended default */
+
+/* Setup decompression object to save desired markers in memory */
+EXTERN(void) jcopy_markers_setup
+	JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option));
+/* Copy markers saved in the given source object to the destination object */
+EXTERN(void) jcopy_markers_execute
+	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	     JCOPY_OPTION option));
diff --git a/jpeg-8d/usage.txt b/jpeg-8d/usage.txt
new file mode 100644
index 0000000..de9def7
--- /dev/null
+++ b/jpeg-8d/usage.txt
@@ -0,0 +1,637 @@
+USAGE instructions for the Independent JPEG Group's JPEG software
+=================================================================
+
+This file describes usage of the JPEG conversion programs cjpeg and djpeg,
+as well as the utility programs jpegtran, rdjpgcom and wrjpgcom.  (See
+the other documentation files if you wish to use the JPEG library within
+your own programs.)
+
+If you are on a Unix machine you may prefer to read the Unix-style manual
+pages in files cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1.
+
+
+INTRODUCTION
+
+These programs implement JPEG image encoding, decoding, and transcoding.
+JPEG (pronounced "jay-peg") is a standardized compression method for
+full-color and gray-scale images.
+
+
+GENERAL USAGE
+
+We provide two programs, cjpeg to compress an image file into JPEG format,
+and djpeg to decompress a JPEG file back into a conventional image format.
+
+On Unix-like systems, you say:
+	cjpeg [switches] [imagefile] >jpegfile
+or
+	djpeg [switches] [jpegfile]  >imagefile
+The programs read the specified input file, or standard input if none is
+named.  They always write to standard output (with trace/error messages to
+standard error).  These conventions are handy for piping images between
+programs.
+
+On most non-Unix systems, you say:
+	cjpeg [switches] imagefile jpegfile
+or
+	djpeg [switches] jpegfile  imagefile
+i.e., both the input and output files are named on the command line.  This
+style is a little more foolproof, and it loses no functionality if you don't
+have pipes.  (You can get this style on Unix too, if you prefer, by defining
+TWO_FILE_COMMANDLINE when you compile the programs; see install.txt.)
+
+You can also say:
+	cjpeg [switches] -outfile jpegfile  imagefile
+or
+	djpeg [switches] -outfile imagefile  jpegfile
+This syntax works on all systems, so it is useful for scripts.
+
+The currently supported image file formats are: PPM (PBMPLUS color format),
+PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster Toolkit
+format).  (RLE is supported only if the URT library is available.)
+cjpeg recognizes the input image format automatically, with the exception
+of some Targa-format files.  You have to tell djpeg which format to generate.
+
+JPEG files are in the defacto standard JFIF file format.  There are other,
+less widely used JPEG-based file formats, but we don't support them.
+
+All switch names may be abbreviated; for example, -grayscale may be written
+-gray or -gr.  Most of the "basic" switches can be abbreviated to as little as
+one letter.  Upper and lower case are equivalent (-BMP is the same as -bmp).
+British spellings are also accepted (e.g., -greyscale), though for brevity
+these are not mentioned below.
+
+
+CJPEG DETAILS
+
+The basic command line switches for cjpeg are:
+
+	-quality N[,...]  Scale quantization tables to adjust image quality.
+			Quality is 0 (worst) to 100 (best); default is 75.
+			(See below for more info.)
+
+	-grayscale	Create monochrome JPEG file from color input.
+			Be sure to use this switch when compressing a grayscale
+			BMP file, because cjpeg isn't bright enough to notice
+			whether a BMP file uses only shades of gray.  By
+			saying -grayscale, you'll get a smaller JPEG file that
+			takes less time to process.
+
+	-rgb		Create RGB JPEG file.
+			Using this switch suppresses the conversion from RGB
+			colorspace input to the default YCbCr JPEG colorspace.
+			Use this switch in combination with the -block N
+			switch (see below) for lossless JPEG coding.
+
+	-optimize	Perform optimization of entropy encoding parameters.
+			Without this, default encoding parameters are used.
+			-optimize usually makes the JPEG file a little smaller,
+			but cjpeg runs somewhat slower and needs much more
+			memory.  Image quality and speed of decompression are
+			unaffected by -optimize.
+
+	-progressive	Create progressive JPEG file (see below).
+
+	-scale M/N	Scale the output image by a factor M/N.  Currently
+			supported scale factors are M/N with all N from 1 to
+			16, where M is the destination DCT size, which is 8 by
+			default (see -block N switch below).
+
+	-targa		Input file is Targa format.  Targa files that contain
+			an "identification" field will not be automatically
+			recognized by cjpeg; for such files you must specify
+			-targa to make cjpeg treat the input as Targa format.
+			For most Targa files, you won't need this switch.
+
+The -quality switch lets you trade off compressed file size against quality of
+the reconstructed image: the higher the quality setting, the larger the JPEG
+file, and the closer the output image will be to the original input.  Normally
+you want to use the lowest quality setting (smallest file) that decompresses
+into something visually indistinguishable from the original image.  For this
+purpose the quality setting should be between 50 and 95; the default of 75 is
+often about right.  If you see defects at -quality 75, then go up 5 or 10
+counts at a time until you are happy with the output image.  (The optimal
+setting will vary from one image to another.)
+
+-quality 100 will generate a quantization table of all 1's, minimizing loss
+in the quantization step (but there is still information loss in subsampling,
+as well as roundoff error).  This setting is mainly of interest for
+experimental purposes.  Quality values above about 95 are NOT recommended for
+normal use; the compressed file size goes up dramatically for hardly any gain
+in output image quality.
+
+In the other direction, quality values below 50 will produce very small files
+of low image quality.  Settings around 5 to 10 might be useful in preparing an
+index of a large image library, for example.  Try -quality 2 (or so) for some
+amusing Cubist effects.  (Note: quality values below about 25 generate 2-byte
+quantization tables, which are considered optional in the JPEG standard.
+cjpeg emits a warning message when you give such a quality value, because some
+other JPEG programs may be unable to decode the resulting file.  Use -baseline
+if you need to ensure compatibility at low quality values.)
+
+The -quality option has been extended in IJG version 7 for support of separate
+quality settings for luminance and chrominance (or in general, for every
+provided quantization table slot).  This feature is useful for high-quality
+applications which cannot accept the damage of color data by coarse
+subsampling settings.  You can now easily reduce the color data amount more
+smoothly with finer control without separate subsampling.  The resulting file
+is fully compliant with standard JPEG decoders.
+Note that the -quality ratings refer to the quantization table slots, and that
+the last value is replicated if there are more q-table slots than parameters.
+The default q-table slots are 0 for luminance and 1 for chrominance with
+default tables as given in the JPEG standard.  This is compatible with the old
+behaviour in case that only one parameter is given, which is then used for
+both luminance and chrominance (slots 0 and 1).  More or custom quantization
+tables can be set with -qtables and assigned to components with -qslots
+parameter (see the "wizard" switches below).
+CAUTION: You must explicitly add -sample 1x1 for efficient separate color
+quality selection, since the default value used by library is 2x2!
+
+The -progressive switch creates a "progressive JPEG" file.  In this type of
+JPEG file, the data is stored in multiple scans of increasing quality.  If the
+file is being transmitted over a slow communications link, the decoder can use
+the first scan to display a low-quality image very quickly, and can then
+improve the display with each subsequent scan.  The final image is exactly
+equivalent to a standard JPEG file of the same quality setting, and the total
+file size is about the same --- often a little smaller.
+
+Switches for advanced users:
+
+	-arithmetic	Use arithmetic coding.  CAUTION: arithmetic coded JPEG
+			is not yet widely implemented, so many decoders will
+			be unable to view an arithmetic coded JPEG file at
+			all.
+
+	-block N	Set DCT block size.  All N from 1 to 16 are possible.
+			Default is 8 (baseline format).
+			Larger values produce higher compression,
+			smaller values produce higher quality
+			(exact DCT stage possible with 1 or 2; with the
+			default quality of 75 and default Luminance qtable
+			the DCT+Quantization stage is lossless for N=1).
+			CAUTION: An implementation of the JPEG SmartScale
+			extension is required for this feature.  SmartScale
+			enabled JPEG is not yet widely implemented, so many
+			decoders will be unable to view a SmartScale extended
+			JPEG file at all.
+
+	-dct int	Use integer DCT method (default).
+	-dct fast	Use fast integer DCT (less accurate).
+	-dct float	Use floating-point DCT method.
+			The float method is very slightly more accurate than
+			the int method, but is much slower unless your machine
+			has very fast floating-point hardware.  Also note that
+			results of the floating-point method may vary slightly
+			across machines, while the integer methods should give
+			the same results everywhere.  The fast integer method
+			is much less accurate than the other two.
+
+	-nosmooth	Don't use high-quality downsampling.
+
+	-restart N	Emit a JPEG restart marker every N MCU rows, or every
+			N MCU blocks if "B" is attached to the number.
+			-restart 0 (the default) means no restart markers.
+
+	-smooth N	Smooth the input image to eliminate dithering noise.
+			N, ranging from 1 to 100, indicates the strength of
+			smoothing.  0 (the default) means no smoothing.
+
+	-maxmemory N	Set limit for amount of memory to use in processing
+			large images.  Value is in thousands of bytes, or
+			millions of bytes if "M" is attached to the number.
+			For example, -max 4m selects 4000000 bytes.  If more
+			space is needed, temporary files will be used.
+
+	-verbose	Enable debug printout.  More -v's give more printout.
+	or  -debug	Also, version information is printed at startup.
+
+The -restart option inserts extra markers that allow a JPEG decoder to
+resynchronize after a transmission error.  Without restart markers, any damage
+to a compressed file will usually ruin the image from the point of the error
+to the end of the image; with restart markers, the damage is usually confined
+to the portion of the image up to the next restart marker.  Of course, the
+restart markers occupy extra space.  We recommend -restart 1 for images that
+will be transmitted across unreliable networks such as Usenet.
+
+The -smooth option filters the input to eliminate fine-scale noise.  This is
+often useful when converting dithered images to JPEG: a moderate smoothing
+factor of 10 to 50 gets rid of dithering patterns in the input file, resulting
+in a smaller JPEG file and a better-looking image.  Too large a smoothing
+factor will visibly blur the image, however.
+
+Switches for wizards:
+
+	-baseline	Force baseline-compatible quantization tables to be
+			generated.  This clamps quantization values to 8 bits
+			even at low quality settings.  (This switch is poorly
+			named, since it does not ensure that the output is
+			actually baseline JPEG.  For example, you can use
+			-baseline and -progressive together.)
+
+	-qtables file	Use the quantization tables given in the specified
+			text file.
+
+	-qslots N[,...] Select which quantization table to use for each color
+			component.
+
+	-sample HxV[,...]  Set JPEG sampling factors for each color component.
+
+	-scans file	Use the scan script given in the specified text file.
+
+The "wizard" switches are intended for experimentation with JPEG.  If you
+don't know what you are doing, DON'T USE THEM.  These switches are documented
+further in the file wizard.txt.
+
+
+DJPEG DETAILS
+
+The basic command line switches for djpeg are:
+
+	-colors N	Reduce image to at most N colors.  This reduces the
+	or -quantize N	number of colors used in the output image, so that it
+			can be displayed on a colormapped display or stored in
+			a colormapped file format.  For example, if you have
+			an 8-bit display, you'd need to reduce to 256 or fewer
+			colors.  (-colors is the recommended name, -quantize
+			is provided only for backwards compatibility.)
+
+	-fast		Select recommended processing options for fast, low
+			quality output.  (The default options are chosen for
+			highest quality output.)  Currently, this is equivalent
+			to "-dct fast -nosmooth -onepass -dither ordered".
+
+	-grayscale	Force gray-scale output even if JPEG file is color.
+			Useful for viewing on monochrome displays; also,
+			djpeg runs noticeably faster in this mode.
+
+	-scale M/N	Scale the output image by a factor M/N.  Currently
+			supported scale factors are M/N with all M from 1 to
+			16, where N is the source DCT size, which is 8 for
+			baseline JPEG.  If the /N part is omitted, then M
+			specifies the DCT scaled size to be applied on the
+			given input.  For baseline JPEG this is equivalent to
+			M/8 scaling, since the source DCT size for baseline
+			JPEG is 8.  Scaling is handy if the image is larger
+			than your screen; also, djpeg runs much faster when
+			scaling down the output.
+
+	-bmp		Select BMP output format (Windows flavor).  8-bit
+			colormapped format is emitted if -colors or -grayscale
+			is specified, or if the JPEG file is gray-scale;
+			otherwise, 24-bit full-color format is emitted.
+
+	-gif		Select GIF output format.  Since GIF does not support
+			more than 256 colors, -colors 256 is assumed (unless
+			you specify a smaller number of colors).  If you
+			specify -fast, the default number of colors is 216.
+
+	-os2		Select BMP output format (OS/2 1.x flavor).  8-bit
+			colormapped format is emitted if -colors or -grayscale
+			is specified, or if the JPEG file is gray-scale;
+			otherwise, 24-bit full-color format is emitted.
+
+	-pnm		Select PBMPLUS (PPM/PGM) output format (this is the
+			default format).  PGM is emitted if the JPEG file is
+			gray-scale or if -grayscale is specified; otherwise
+			PPM is emitted.
+
+	-rle		Select RLE output format.  (Requires URT library.)
+
+	-targa		Select Targa output format.  Gray-scale format is
+			emitted if the JPEG file is gray-scale or if
+			-grayscale is specified; otherwise, colormapped format
+			is emitted if -colors is specified; otherwise, 24-bit
+			full-color format is emitted.
+
+Switches for advanced users:
+
+	-dct int	Use integer DCT method (default).
+	-dct fast	Use fast integer DCT (less accurate).
+	-dct float	Use floating-point DCT method.
+			The float method is very slightly more accurate than
+			the int method, but is much slower unless your machine
+			has very fast floating-point hardware.  Also note that
+			results of the floating-point method may vary slightly
+			across machines, while the integer methods should give
+			the same results everywhere.  The fast integer method
+			is much less accurate than the other two.
+
+	-dither fs	Use Floyd-Steinberg dithering in color quantization.
+	-dither ordered	Use ordered dithering in color quantization.
+	-dither none	Do not use dithering in color quantization.
+			By default, Floyd-Steinberg dithering is applied when
+			quantizing colors; this is slow but usually produces
+			the best results.  Ordered dither is a compromise
+			between speed and quality; no dithering is fast but
+			usually looks awful.  Note that these switches have
+			no effect unless color quantization is being done.
+			Ordered dither is only available in -onepass mode.
+
+	-map FILE	Quantize to the colors used in the specified image
+			file.  This is useful for producing multiple files
+			with identical color maps, or for forcing a predefined
+			set of colors to be used.  The FILE must be a GIF
+			or PPM file.  This option overrides -colors and
+			-onepass.
+
+	-nosmooth	Don't use high-quality upsampling.
+
+	-onepass	Use one-pass instead of two-pass color quantization.
+			The one-pass method is faster and needs less memory,
+			but it produces a lower-quality image.  -onepass is
+			ignored unless you also say -colors N.  Also,
+			the one-pass method is always used for gray-scale
+			output (the two-pass method is no improvement then).
+
+	-maxmemory N	Set limit for amount of memory to use in processing
+			large images.  Value is in thousands of bytes, or
+			millions of bytes if "M" is attached to the number.
+			For example, -max 4m selects 4000000 bytes.  If more
+			space is needed, temporary files will be used.
+
+	-verbose	Enable debug printout.  More -v's give more printout.
+	or  -debug	Also, version information is printed at startup.
+
+
+HINTS FOR CJPEG
+
+Color GIF files are not the ideal input for JPEG; JPEG is really intended for
+compressing full-color (24-bit) images.  In particular, don't try to convert
+cartoons, line drawings, and other images that have only a few distinct
+colors.  GIF works great on these, JPEG does not.  If you want to convert a
+GIF to JPEG, you should experiment with cjpeg's -quality and -smooth options
+to get a satisfactory conversion.  -smooth 10 or so is often helpful.
+
+Avoid running an image through a series of JPEG compression/decompression
+cycles.  Image quality loss will accumulate; after ten or so cycles the image
+may be noticeably worse than it was after one cycle.  It's best to use a
+lossless format while manipulating an image, then convert to JPEG format when
+you are ready to file the image away.
+
+The -optimize option to cjpeg is worth using when you are making a "final"
+version for posting or archiving.  It's also a win when you are using low
+quality settings to make very small JPEG files; the percentage improvement
+is often a lot more than it is on larger files.  (At present, -optimize
+mode is always selected when generating progressive JPEG files.)
+
+GIF input files are no longer supported, to avoid the Unisys LZW patent.
+(Conversion of GIF files to JPEG is usually a bad idea anyway.)
+
+
+HINTS FOR DJPEG
+
+To get a quick preview of an image, use the -grayscale and/or -scale switches.
+"-grayscale -scale 1/8" is the fastest case.
+
+Several options are available that trade off image quality to gain speed.
+"-fast" turns on the recommended settings.
+
+"-dct fast" and/or "-nosmooth" gain speed at a small sacrifice in quality.
+When producing a color-quantized image, "-onepass -dither ordered" is fast but
+much lower quality than the default behavior.  "-dither none" may give
+acceptable results in two-pass mode, but is seldom tolerable in one-pass mode.
+
+If you are fortunate enough to have very fast floating point hardware,
+"-dct float" may be even faster than "-dct fast".  But on most machines
+"-dct float" is slower than "-dct int"; in this case it is not worth using,
+because its theoretical accuracy advantage is too small to be significant
+in practice.
+
+Two-pass color quantization requires a good deal of memory; on MS-DOS machines
+it may run out of memory even with -maxmemory 0.  In that case you can still
+decompress, with some loss of image quality, by specifying -onepass for
+one-pass quantization.
+
+To avoid the Unisys LZW patent, djpeg produces uncompressed GIF files.  These
+are larger than they should be, but are readable by standard GIF decoders.
+
+
+HINTS FOR BOTH PROGRAMS
+
+If more space is needed than will fit in the available main memory (as
+determined by -maxmemory), temporary files will be used.  (MS-DOS versions
+will try to get extended or expanded memory first.)  The temporary files are
+often rather large: in typical cases they occupy three bytes per pixel, for
+example 3*800*600 = 1.44Mb for an 800x600 image.  If you don't have enough
+free disk space, leave out -progressive and -optimize (for cjpeg) or specify
+-onepass (for djpeg).
+
+On MS-DOS, the temporary files are created in the directory named by the TMP
+or TEMP environment variable, or in the current directory if neither of those
+exist.  Amiga implementations put the temp files in the directory named by
+JPEGTMP:, so be sure to assign JPEGTMP: to a disk partition with adequate free
+space.
+
+The default memory usage limit (-maxmemory) is set when the software is
+compiled.  If you get an "insufficient memory" error, try specifying a smaller
+-maxmemory value, even -maxmemory 0 to use the absolute minimum space.  You
+may want to recompile with a smaller default value if this happens often.
+
+On machines that have "environment" variables, you can define the environment
+variable JPEGMEM to set the default memory limit.  The value is specified as
+described for the -maxmemory switch.  JPEGMEM overrides the default value
+specified when the program was compiled, and itself is overridden by an
+explicit -maxmemory switch.
+
+On MS-DOS machines, -maxmemory is the amount of main (conventional) memory to
+use.  (Extended or expanded memory is also used if available.)  Most
+DOS-specific versions of this software do their own memory space estimation
+and do not need you to specify -maxmemory.
+
+
+JPEGTRAN
+
+jpegtran performs various useful transformations of JPEG files.
+It can translate the coded representation from one variant of JPEG to another,
+for example from baseline JPEG to progressive JPEG or vice versa.  It can also
+perform some rearrangements of the image data, for example turning an image
+from landscape to portrait format by rotation.
+
+jpegtran works by rearranging the compressed data (DCT coefficients), without
+ever fully decoding the image.  Therefore, its transformations are lossless:
+there is no image degradation at all, which would not be true if you used
+djpeg followed by cjpeg to accomplish the same conversion.  But by the same
+token, jpegtran cannot perform lossy operations such as changing the image
+quality.
+
+jpegtran uses a command line syntax similar to cjpeg or djpeg.
+On Unix-like systems, you say:
+	jpegtran [switches] [inputfile] >outputfile
+On most non-Unix systems, you say:
+	jpegtran [switches] inputfile outputfile
+where both the input and output files are JPEG files.
+
+To specify the coded JPEG representation used in the output file,
+jpegtran accepts a subset of the switches recognized by cjpeg:
+	-optimize	Perform optimization of entropy encoding parameters.
+	-progressive	Create progressive JPEG file.
+	-arithmetic	Use arithmetic coding.
+	-restart N	Emit a JPEG restart marker every N MCU rows, or every
+			N MCU blocks if "B" is attached to the number.
+	-scans file	Use the scan script given in the specified text file.
+See the previous discussion of cjpeg for more details about these switches.
+If you specify none of these switches, you get a plain baseline-JPEG output
+file.  The quality setting and so forth are determined by the input file.
+
+The image can be losslessly transformed by giving one of these switches:
+	-flip horizontal	Mirror image horizontally (left-right).
+	-flip vertical		Mirror image vertically (top-bottom).
+	-rotate 90		Rotate image 90 degrees clockwise.
+	-rotate 180		Rotate image 180 degrees.
+	-rotate 270		Rotate image 270 degrees clockwise (or 90 ccw).
+	-transpose		Transpose image (across UL-to-LR axis).
+	-transverse		Transverse transpose (across UR-to-LL axis).
+
+The transpose transformation has no restrictions regarding image dimensions.
+The other transformations operate rather oddly if the image dimensions are not
+a multiple of the iMCU size (usually 8 or 16 pixels), because they can only
+transform complete blocks of DCT coefficient data in the desired way.
+
+jpegtran's default behavior when transforming an odd-size image is designed
+to preserve exact reversibility and mathematical consistency of the
+transformation set.  As stated, transpose is able to flip the entire image
+area.  Horizontal mirroring leaves any partial iMCU column at the right edge
+untouched, but is able to flip all rows of the image.  Similarly, vertical
+mirroring leaves any partial iMCU row at the bottom edge untouched, but is
+able to flip all columns.  The other transforms can be built up as sequences
+of transpose and flip operations; for consistency, their actions on edge
+pixels are defined to be the same as the end result of the corresponding
+transpose-and-flip sequence.
+
+For practical use, you may prefer to discard any untransformable edge pixels
+rather than having a strange-looking strip along the right and/or bottom edges
+of a transformed image.  To do this, add the -trim switch:
+	-trim		Drop non-transformable edge blocks.
+Obviously, a transformation with -trim is not reversible, so strictly speaking
+jpegtran with this switch is not lossless.  Also, the expected mathematical
+equivalences between the transformations no longer hold.  For example,
+"-rot 270 -trim" trims only the bottom edge, but "-rot 90 -trim" followed by
+"-rot 180 -trim" trims both edges.
+
+If you are only interested in perfect transformation, add the -perfect switch:
+	-perfect	Fails with an error if the transformation is not
+			perfect.
+For example you may want to do
+  jpegtran -rot 90 -perfect foo.jpg || djpeg foo.jpg | pnmflip -r90 | cjpeg
+to do a perfect rotation if available or an approximated one if not.
+
+We also offer a lossless-crop option, which discards data outside a given
+image region but losslessly preserves what is inside.  Like the rotate and
+flip transforms, lossless crop is restricted by the current JPEG format: the
+upper left corner of the selected region must fall on an iMCU boundary.  If
+this does not hold for the given crop parameters, we silently move the upper
+left corner up and/or left to make it so, simultaneously increasing the region
+dimensions to keep the lower right crop corner unchanged.  (Thus, the output
+image covers at least the requested region, but may cover more.)
+
+The image can be losslessly cropped by giving the switch:
+	-crop WxH+X+Y	Crop to a rectangular subarea of width W, height H
+			starting at point X,Y.
+
+Other not-strictly-lossless transformation switches are:
+
+	-grayscale	Force grayscale output.
+This option discards the chrominance channels if the input image is YCbCr
+(ie, a standard color JPEG), resulting in a grayscale JPEG file.  The
+luminance channel is preserved exactly, so this is a better method of reducing
+to grayscale than decompression, conversion, and recompression.  This switch
+is particularly handy for fixing a monochrome picture that was mistakenly
+encoded as a color JPEG.  (In such a case, the space savings from getting rid
+of the near-empty chroma channels won't be large; but the decoding time for
+a grayscale JPEG is substantially less than that for a color JPEG.)
+
+	-scale M/N	Scale the output image by a factor M/N.
+Currently supported scale factors are M/N with all M from 1 to 16, where N is
+the source DCT size, which is 8 for baseline JPEG.  If the /N part is omitted,
+then M specifies the DCT scaled size to be applied on the given input.  For
+baseline JPEG this is equivalent to M/8 scaling, since the source DCT size
+for baseline JPEG is 8.  CAUTION: An implementation of the JPEG SmartScale
+extension is required for this feature.  SmartScale enabled JPEG is not yet
+widely implemented, so many decoders will be unable to view a SmartScale
+extended JPEG file at all.
+
+jpegtran also recognizes these switches that control what to do with "extra"
+markers, such as comment blocks:
+	-copy none	Copy no extra markers from source file.  This setting
+			suppresses all comments and other excess baggage
+			present in the source file.
+	-copy comments	Copy only comment markers.  This setting copies
+			comments from the source file, but discards
+			any other inessential (for image display) data.
+	-copy all	Copy all extra markers.  This setting preserves
+			miscellaneous markers found in the source file, such
+			as JFIF thumbnails, Exif data, and Photoshop settings.
+			In some files these extra markers can be sizable.
+The default behavior is -copy comments.  (Note: in IJG releases v6 and v6a,
+jpegtran always did the equivalent of -copy none.)
+
+Additional switches recognized by jpegtran are:
+	-outfile filename
+	-maxmemory N
+	-verbose
+	-debug
+These work the same as in cjpeg or djpeg.
+
+
+THE COMMENT UTILITIES
+
+The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file.
+Although the standard doesn't actually define what COM blocks are for, they
+are widely used to hold user-supplied text strings.  This lets you add
+annotations, titles, index terms, etc to your JPEG files, and later retrieve
+them as text.  COM blocks do not interfere with the image stored in the JPEG
+file.  The maximum size of a COM block is 64K, but you can have as many of
+them as you like in one JPEG file.
+
+We provide two utility programs to display COM block contents and add COM
+blocks to a JPEG file.
+
+rdjpgcom searches a JPEG file and prints the contents of any COM blocks on
+standard output.  The command line syntax is
+	rdjpgcom [-raw] [-verbose] [inputfilename]
+The switch "-raw" (or just "-r") causes rdjpgcom to also output non-printable
+characters in comments, which are normally escaped for security reasons.
+The switch "-verbose" (or just "-v") causes rdjpgcom to also display the JPEG
+image dimensions.  If you omit the input file name from the command line,
+the JPEG file is read from standard input.  (This may not work on some
+operating systems, if binary data can't be read from stdin.)
+
+wrjpgcom adds a COM block, containing text you provide, to a JPEG file.
+Ordinarily, the COM block is added after any existing COM blocks, but you
+can delete the old COM blocks if you wish.  wrjpgcom produces a new JPEG
+file; it does not modify the input file.  DO NOT try to overwrite the input
+file by directing wrjpgcom's output back into it; on most systems this will
+just destroy your file.
+
+The command line syntax for wrjpgcom is similar to cjpeg's.  On Unix-like
+systems, it is
+	wrjpgcom [switches] [inputfilename]
+The output file is written to standard output.  The input file comes from
+the named file, or from standard input if no input file is named.
+
+On most non-Unix systems, the syntax is
+	wrjpgcom [switches] inputfilename outputfilename
+where both input and output file names must be given explicitly.
+
+wrjpgcom understands three switches:
+	-replace		 Delete any existing COM blocks from the file.
+	-comment "Comment text"	 Supply new COM text on command line.
+	-cfile name		 Read text for new COM block from named file.
+(Switch names can be abbreviated.)  If you have only one line of comment text
+to add, you can provide it on the command line with -comment.  The comment
+text must be surrounded with quotes so that it is treated as a single
+argument.  Longer comments can be read from a text file.
+
+If you give neither -comment nor -cfile, then wrjpgcom will read the comment
+text from standard input.  (In this case an input image file name MUST be
+supplied, so that the source JPEG file comes from somewhere else.)  You can
+enter multiple lines, up to 64KB worth.  Type an end-of-file indicator
+(usually control-D or control-Z) to terminate the comment text entry.
+
+wrjpgcom will not add a COM block if the provided comment string is empty.
+Therefore -replace -comment "" can be used to delete all COM blocks from a
+file.
+
+These utility programs do not depend on the IJG JPEG library.  In
+particular, the source code for rdjpgcom is intended as an illustration of
+the minimum amount of code required to parse a JPEG file header correctly.
diff --git a/jpeg-8d/wizard.txt b/jpeg-8d/wizard.txt
new file mode 100644
index 0000000..54170b2
--- /dev/null
+++ b/jpeg-8d/wizard.txt
@@ -0,0 +1,211 @@
+Advanced usage instructions for the Independent JPEG Group's JPEG software
+==========================================================================
+
+This file describes cjpeg's "switches for wizards".
+
+The "wizard" switches are intended for experimentation with JPEG by persons
+who are reasonably knowledgeable about the JPEG standard.  If you don't know
+what you are doing, DON'T USE THESE SWITCHES.  You'll likely produce files
+with worse image quality and/or poorer compression than you'd get from the
+default settings.  Furthermore, these switches must be used with caution
+when making files intended for general use, because not all JPEG decoders
+will support unusual JPEG parameter settings.
+
+
+Quantization Table Adjustment
+-----------------------------
+
+Ordinarily, cjpeg starts with a default set of tables (the same ones given
+as examples in the JPEG standard) and scales them up or down according to
+the -quality setting.  The details of the scaling algorithm can be found in
+jcparam.c.  At very low quality settings, some quantization table entries
+can get scaled up to values exceeding 255.  Although 2-byte quantization
+values are supported by the IJG software, this feature is not in baseline
+JPEG and is not supported by all implementations.  If you need to ensure
+wide compatibility of low-quality files, you can constrain the scaled
+quantization values to no more than 255 by giving the -baseline switch.
+Note that use of -baseline will result in poorer quality for the same file
+size, since more bits than necessary are expended on higher AC coefficients.
+
+You can substitute a different set of quantization values by using the
+-qtables switch:
+
+	-qtables file	Use the quantization tables given in the named file.
+
+The specified file should be a text file containing decimal quantization
+values.  The file should contain one to four tables, each of 64 elements.
+The tables are implicitly numbered 0,1,etc. in order of appearance.  Table
+entries appear in normal array order (NOT in the zigzag order in which they
+will be stored in the JPEG file).
+
+Quantization table files are free format, in that arbitrary whitespace can
+appear between numbers.  Also, comments can be included: a comment starts
+with '#' and extends to the end of the line.  Here is an example file that
+duplicates the default quantization tables:
+
+	# Quantization tables given in JPEG spec, section K.1
+
+	# This is table 0 (the luminance table):
+	  16  11  10  16  24  40  51  61
+	  12  12  14  19  26  58  60  55
+	  14  13  16  24  40  57  69  56
+	  14  17  22  29  51  87  80  62
+	  18  22  37  56  68 109 103  77
+	  24  35  55  64  81 104 113  92
+	  49  64  78  87 103 121 120 101
+	  72  92  95  98 112 100 103  99
+
+	# This is table 1 (the chrominance table):
+	  17  18  24  47  99  99  99  99
+	  18  21  26  66  99  99  99  99
+	  24  26  56  99  99  99  99  99
+	  47  66  99  99  99  99  99  99
+	  99  99  99  99  99  99  99  99
+	  99  99  99  99  99  99  99  99
+	  99  99  99  99  99  99  99  99
+	  99  99  99  99  99  99  99  99
+
+If the -qtables switch is used without -quality, then the specified tables
+are used exactly as-is.  If both -qtables and -quality are used, then the
+tables taken from the file are scaled in the same fashion that the default
+tables would be scaled for that quality setting.  If -baseline appears, then
+the quantization values are constrained to the range 1-255.
+
+By default, cjpeg will use quantization table 0 for luminance components and
+table 1 for chrominance components.  To override this choice, use the -qslots
+switch:
+
+	-qslots N[,...]		Select which quantization table to use for
+				each color component.
+
+The -qslots switch specifies a quantization table number for each color
+component, in the order in which the components appear in the JPEG SOF marker.
+For example, to create a separate table for each of Y,Cb,Cr, you could
+provide a -qtables file that defines three quantization tables and say
+"-qslots 0,1,2".  If -qslots gives fewer table numbers than there are color
+components, then the last table number is repeated as necessary.
+
+
+Sampling Factor Adjustment
+--------------------------
+
+By default, cjpeg uses 2:1 horizontal and vertical downsampling when
+compressing YCbCr data, and no downsampling for all other color spaces.
+You can override this default with the -sample switch:
+
+	-sample HxV[,...]	Set JPEG sampling factors for each color
+				component.
+
+The -sample switch specifies the JPEG sampling factors for each color
+component, in the order in which they appear in the JPEG SOF marker.
+If you specify fewer HxV pairs than there are components, the remaining
+components are set to 1x1 sampling.  For example, the default YCbCr setting
+is equivalent to "-sample 2x2,1x1,1x1", which can be abbreviated to
+"-sample 2x2".
+
+There are still some JPEG decoders in existence that support only 2x1
+sampling (also called 4:2:2 sampling).  Compatibility with such decoders can
+be achieved by specifying "-sample 2x1".  This is not recommended unless
+really necessary, since it increases file size and encoding/decoding time
+with very little quality gain.
+
+
+Multiple Scan / Progression Control
+-----------------------------------
+
+By default, cjpeg emits a single-scan sequential JPEG file.  The
+-progressive switch generates a progressive JPEG file using a default series
+of progression parameters.  You can create multiple-scan sequential JPEG
+files or progressive JPEG files with custom progression parameters by using
+the -scans switch:
+
+	-scans file	Use the scan sequence given in the named file.
+
+The specified file should be a text file containing a "scan script".
+The script specifies the contents and ordering of the scans to be emitted.
+Each entry in the script defines one scan.  A scan definition specifies
+the components to be included in the scan, and for progressive JPEG it also
+specifies the progression parameters Ss,Se,Ah,Al for the scan.  Scan
+definitions are separated by semicolons (';').  A semicolon after the last
+scan definition is optional.
+
+Each scan definition contains one to four component indexes, optionally
+followed by a colon (':') and the four progressive-JPEG parameters.  The
+component indexes denote which color component(s) are to be transmitted in
+the scan.  Components are numbered in the order in which they appear in the
+JPEG SOF marker, with the first component being numbered 0.  (Note that these
+indexes are not the "component ID" codes assigned to the components, just
+positional indexes.)
+
+The progression parameters for each scan are:
+	Ss	Zigzag index of first coefficient included in scan
+	Se	Zigzag index of last coefficient included in scan
+	Ah	Zero for first scan of a coefficient, else Al of prior scan
+	Al	Successive approximation low bit position for scan
+If the progression parameters are omitted, the values 0,63,0,0 are used,
+producing a sequential JPEG file.  cjpeg automatically determines whether
+the script represents a progressive or sequential file, by observing whether
+Ss and Se values other than 0 and 63 appear.  (The -progressive switch is
+not needed to specify this; in fact, it is ignored when -scans appears.)
+The scan script must meet the JPEG restrictions on progression sequences.
+(cjpeg checks that the spec's requirements are obeyed.)
+
+Scan script files are free format, in that arbitrary whitespace can appear
+between numbers and around punctuation.  Also, comments can be included: a
+comment starts with '#' and extends to the end of the line.  For additional
+legibility, commas or dashes can be placed between values.  (Actually, any
+single punctuation character other than ':' or ';' can be inserted.)  For
+example, the following two scan definitions are equivalent:
+	0 1 2: 0 63 0 0;
+	0,1,2 : 0-63, 0,0 ;
+
+Here is an example of a scan script that generates a partially interleaved
+sequential JPEG file:
+
+	0;			# Y only in first scan
+	1 2;			# Cb and Cr in second scan
+
+Here is an example of a progressive scan script using only spectral selection
+(no successive approximation):
+
+	# Interleaved DC scan for Y,Cb,Cr:
+	0,1,2: 0-0,   0, 0 ;
+	# AC scans:
+	0:     1-2,   0, 0 ;	# First two Y AC coefficients
+	0:     3-5,   0, 0 ;	# Three more
+	1:     1-63,  0, 0 ;	# All AC coefficients for Cb
+	2:     1-63,  0, 0 ;	# All AC coefficients for Cr
+	0:     6-9,   0, 0 ;	# More Y coefficients
+	0:     10-63, 0, 0 ;	# Remaining Y coefficients
+
+Here is an example of a successive-approximation script.  This is equivalent
+to the default script used by "cjpeg -progressive" for YCbCr images:
+
+	# Initial DC scan for Y,Cb,Cr (lowest bit not sent)
+	0,1,2: 0-0,   0, 1 ;
+	# First AC scan: send first 5 Y AC coefficients, minus 2 lowest bits:
+	0:     1-5,   0, 2 ;
+	# Send all Cr,Cb AC coefficients, minus lowest bit:
+	# (chroma data is usually too small to be worth subdividing further;
+	#  but note we send Cr first since eye is least sensitive to Cb)
+	2:     1-63,  0, 1 ;
+	1:     1-63,  0, 1 ;
+	# Send remaining Y AC coefficients, minus 2 lowest bits:
+	0:     6-63,  0, 2 ;
+	# Send next-to-lowest bit of all Y AC coefficients:
+	0:     1-63,  2, 1 ;
+	# At this point we've sent all but the lowest bit of all coefficients.
+	# Send lowest bit of DC coefficients
+	0,1,2: 0-0,   1, 0 ;
+	# Send lowest bit of AC coefficients
+	2:     1-63,  1, 0 ;
+	1:     1-63,  1, 0 ;
+	# Y AC lowest bit scan is last; it's usually the largest scan
+	0:     1-63,  1, 0 ;
+
+It may be worth pointing out that this script is tuned for quality settings
+of around 50 to 75.  For lower quality settings, you'd probably want to use
+a script with fewer stages of successive approximation (otherwise the
+initial scans will be really bad).  For higher quality settings, you might
+want to use more stages of successive approximation (so that the initial
+scans are not too large).
diff --git a/jpeg-8d/wrbmp.c b/jpeg-8d/wrbmp.c
new file mode 100644
index 0000000..3283b0f
--- /dev/null
+++ b/jpeg-8d/wrbmp.c
@@ -0,0 +1,442 @@
+/*
+ * wrbmp.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to write output images in Microsoft "BMP"
+ * format (MS Windows 3.x and OS/2 1.x flavors).
+ * Either 8-bit colormapped or 24-bit full-color format can be written.
+ * No compression is supported.
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume output to
+ * an ordinary stdio stream.
+ *
+ * This code contributed by James Arthur Boucher.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef BMP_SUPPORTED
+
+
+/*
+ * To support 12-bit JPEG data, we'd have to scale output down to 8 bits.
+ * This is not yet implemented.
+ */
+
+#if BITS_IN_JSAMPLE != 8
+  Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
+#endif
+
+/*
+ * Since BMP stores scanlines bottom-to-top, we have to invert the image
+ * from JPEG's top-to-bottom order.  To do this, we save the outgoing data
+ * in a virtual array during put_pixel_row calls, then actually emit the
+ * BMP file during finish_output.  The virtual array contains one JSAMPLE per
+ * pixel if the output is grayscale or colormapped, three if it is full color.
+ */
+
+/* Private version of data destination object */
+
+typedef struct {
+  struct djpeg_dest_struct pub;	/* public fields */
+
+  boolean is_os2;		/* saves the OS2 format request flag */
+
+  jvirt_sarray_ptr whole_image;	/* needed to reverse row order */
+  JDIMENSION data_width;	/* JSAMPLEs per row */
+  JDIMENSION row_width;		/* physical width of one row in the BMP file */
+  int pad_bytes;		/* number of padding bytes needed per row */
+  JDIMENSION cur_output_row;	/* next row# to write to virtual array */
+} bmp_dest_struct;
+
+typedef bmp_dest_struct * bmp_dest_ptr;
+
+
+/* Forward declarations */
+LOCAL(void) write_colormap
+	JPP((j_decompress_ptr cinfo, bmp_dest_ptr dest,
+	     int map_colors, int map_entry_size));
+
+
+/*
+ * Write some pixel data.
+ * In this module rows_supplied will always be 1.
+ */
+
+METHODDEF(void)
+put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		JDIMENSION rows_supplied)
+/* This version is for writing 24-bit pixels */
+{
+  bmp_dest_ptr dest = (bmp_dest_ptr) dinfo;
+  JSAMPARRAY image_ptr;
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+  int pad;
+
+  /* Access next row in virtual array */
+  image_ptr = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, dest->whole_image,
+     dest->cur_output_row, (JDIMENSION) 1, TRUE);
+  dest->cur_output_row++;
+
+  /* Transfer data.  Note destination values must be in BGR order
+   * (even though Microsoft's own documents say the opposite).
+   */
+  inptr = dest->pub.buffer[0];
+  outptr = image_ptr[0];
+  for (col = cinfo->output_width; col > 0; col--) {
+    outptr[2] = *inptr++;	/* can omit GETJSAMPLE() safely */
+    outptr[1] = *inptr++;
+    outptr[0] = *inptr++;
+    outptr += 3;
+  }
+
+  /* Zero out the pad bytes. */
+  pad = dest->pad_bytes;
+  while (--pad >= 0)
+    *outptr++ = 0;
+}
+
+METHODDEF(void)
+put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+	       JDIMENSION rows_supplied)
+/* This version is for grayscale OR quantized color output */
+{
+  bmp_dest_ptr dest = (bmp_dest_ptr) dinfo;
+  JSAMPARRAY image_ptr;
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+  int pad;
+
+  /* Access next row in virtual array */
+  image_ptr = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, dest->whole_image,
+     dest->cur_output_row, (JDIMENSION) 1, TRUE);
+  dest->cur_output_row++;
+
+  /* Transfer data. */
+  inptr = dest->pub.buffer[0];
+  outptr = image_ptr[0];
+  for (col = cinfo->output_width; col > 0; col--) {
+    *outptr++ = *inptr++;	/* can omit GETJSAMPLE() safely */
+  }
+
+  /* Zero out the pad bytes. */
+  pad = dest->pad_bytes;
+  while (--pad >= 0)
+    *outptr++ = 0;
+}
+
+
+/*
+ * Startup: normally writes the file header.
+ * In this module we may as well postpone everything until finish_output.
+ */
+
+METHODDEF(void)
+start_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  /* no work here */
+}
+
+
+/*
+ * Finish up at the end of the file.
+ *
+ * Here is where we really output the BMP file.
+ *
+ * First, routines to write the Windows and OS/2 variants of the file header.
+ */
+
+LOCAL(void)
+write_bmp_header (j_decompress_ptr cinfo, bmp_dest_ptr dest)
+/* Write a Windows-style BMP file header, including colormap if needed */
+{
+  char bmpfileheader[14];
+  char bmpinfoheader[40];
+#define PUT_2B(array,offset,value)  \
+	(array[offset] = (char) ((value) & 0xFF), \
+	 array[offset+1] = (char) (((value) >> 8) & 0xFF))
+#define PUT_4B(array,offset,value)  \
+	(array[offset] = (char) ((value) & 0xFF), \
+	 array[offset+1] = (char) (((value) >> 8) & 0xFF), \
+	 array[offset+2] = (char) (((value) >> 16) & 0xFF), \
+	 array[offset+3] = (char) (((value) >> 24) & 0xFF))
+  INT32 headersize, bfSize;
+  int bits_per_pixel, cmap_entries;
+
+  /* Compute colormap size and total file size */
+  if (cinfo->out_color_space == JCS_RGB) {
+    if (cinfo->quantize_colors) {
+      /* Colormapped RGB */
+      bits_per_pixel = 8;
+      cmap_entries = 256;
+    } else {
+      /* Unquantized, full color RGB */
+      bits_per_pixel = 24;
+      cmap_entries = 0;
+    }
+  } else {
+    /* Grayscale output.  We need to fake a 256-entry colormap. */
+    bits_per_pixel = 8;
+    cmap_entries = 256;
+  }
+  /* File size */
+  headersize = 14 + 40 + cmap_entries * 4; /* Header and colormap */
+  bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height;
+  
+  /* Set unused fields of header to 0 */
+  MEMZERO(bmpfileheader, SIZEOF(bmpfileheader));
+  MEMZERO(bmpinfoheader, SIZEOF(bmpinfoheader));
+
+  /* Fill the file header */
+  bmpfileheader[0] = 0x42;	/* first 2 bytes are ASCII 'B', 'M' */
+  bmpfileheader[1] = 0x4D;
+  PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */
+  /* we leave bfReserved1 & bfReserved2 = 0 */
+  PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */
+
+  /* Fill the info header (Microsoft calls this a BITMAPINFOHEADER) */
+  PUT_2B(bmpinfoheader, 0, 40);	/* biSize */
+  PUT_4B(bmpinfoheader, 4, cinfo->output_width); /* biWidth */
+  PUT_4B(bmpinfoheader, 8, cinfo->output_height); /* biHeight */
+  PUT_2B(bmpinfoheader, 12, 1);	/* biPlanes - must be 1 */
+  PUT_2B(bmpinfoheader, 14, bits_per_pixel); /* biBitCount */
+  /* we leave biCompression = 0, for none */
+  /* we leave biSizeImage = 0; this is correct for uncompressed data */
+  if (cinfo->density_unit == 2) { /* if have density in dots/cm, then */
+    PUT_4B(bmpinfoheader, 24, (INT32) (cinfo->X_density*100)); /* XPels/M */
+    PUT_4B(bmpinfoheader, 28, (INT32) (cinfo->Y_density*100)); /* XPels/M */
+  }
+  PUT_2B(bmpinfoheader, 32, cmap_entries); /* biClrUsed */
+  /* we leave biClrImportant = 0 */
+
+  if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14)
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+  if (JFWRITE(dest->pub.output_file, bmpinfoheader, 40) != (size_t) 40)
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+
+  if (cmap_entries > 0)
+    write_colormap(cinfo, dest, cmap_entries, 4);
+}
+
+
+LOCAL(void)
+write_os2_header (j_decompress_ptr cinfo, bmp_dest_ptr dest)
+/* Write an OS2-style BMP file header, including colormap if needed */
+{
+  char bmpfileheader[14];
+  char bmpcoreheader[12];
+  INT32 headersize, bfSize;
+  int bits_per_pixel, cmap_entries;
+
+  /* Compute colormap size and total file size */
+  if (cinfo->out_color_space == JCS_RGB) {
+    if (cinfo->quantize_colors) {
+      /* Colormapped RGB */
+      bits_per_pixel = 8;
+      cmap_entries = 256;
+    } else {
+      /* Unquantized, full color RGB */
+      bits_per_pixel = 24;
+      cmap_entries = 0;
+    }
+  } else {
+    /* Grayscale output.  We need to fake a 256-entry colormap. */
+    bits_per_pixel = 8;
+    cmap_entries = 256;
+  }
+  /* File size */
+  headersize = 14 + 12 + cmap_entries * 3; /* Header and colormap */
+  bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height;
+  
+  /* Set unused fields of header to 0 */
+  MEMZERO(bmpfileheader, SIZEOF(bmpfileheader));
+  MEMZERO(bmpcoreheader, SIZEOF(bmpcoreheader));
+
+  /* Fill the file header */
+  bmpfileheader[0] = 0x42;	/* first 2 bytes are ASCII 'B', 'M' */
+  bmpfileheader[1] = 0x4D;
+  PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */
+  /* we leave bfReserved1 & bfReserved2 = 0 */
+  PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */
+
+  /* Fill the info header (Microsoft calls this a BITMAPCOREHEADER) */
+  PUT_2B(bmpcoreheader, 0, 12);	/* bcSize */
+  PUT_2B(bmpcoreheader, 4, cinfo->output_width); /* bcWidth */
+  PUT_2B(bmpcoreheader, 6, cinfo->output_height); /* bcHeight */
+  PUT_2B(bmpcoreheader, 8, 1);	/* bcPlanes - must be 1 */
+  PUT_2B(bmpcoreheader, 10, bits_per_pixel); /* bcBitCount */
+
+  if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14)
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+  if (JFWRITE(dest->pub.output_file, bmpcoreheader, 12) != (size_t) 12)
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+
+  if (cmap_entries > 0)
+    write_colormap(cinfo, dest, cmap_entries, 3);
+}
+
+
+/*
+ * Write the colormap.
+ * Windows uses BGR0 map entries; OS/2 uses BGR entries.
+ */
+
+LOCAL(void)
+write_colormap (j_decompress_ptr cinfo, bmp_dest_ptr dest,
+		int map_colors, int map_entry_size)
+{
+  JSAMPARRAY colormap = cinfo->colormap;
+  int num_colors = cinfo->actual_number_of_colors;
+  FILE * outfile = dest->pub.output_file;
+  int i;
+
+  if (colormap != NULL) {
+    if (cinfo->out_color_components == 3) {
+      /* Normal case with RGB colormap */
+      for (i = 0; i < num_colors; i++) {
+	putc(GETJSAMPLE(colormap[2][i]), outfile);
+	putc(GETJSAMPLE(colormap[1][i]), outfile);
+	putc(GETJSAMPLE(colormap[0][i]), outfile);
+	if (map_entry_size == 4)
+	  putc(0, outfile);
+      }
+    } else {
+      /* Grayscale colormap (only happens with grayscale quantization) */
+      for (i = 0; i < num_colors; i++) {
+	putc(GETJSAMPLE(colormap[0][i]), outfile);
+	putc(GETJSAMPLE(colormap[0][i]), outfile);
+	putc(GETJSAMPLE(colormap[0][i]), outfile);
+	if (map_entry_size == 4)
+	  putc(0, outfile);
+      }
+    }
+  } else {
+    /* If no colormap, must be grayscale data.  Generate a linear "map". */
+    for (i = 0; i < 256; i++) {
+      putc(i, outfile);
+      putc(i, outfile);
+      putc(i, outfile);
+      if (map_entry_size == 4)
+	putc(0, outfile);
+    }
+  }
+  /* Pad colormap with zeros to ensure specified number of colormap entries */ 
+  if (i > map_colors)
+    ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, i);
+  for (; i < map_colors; i++) {
+    putc(0, outfile);
+    putc(0, outfile);
+    putc(0, outfile);
+    if (map_entry_size == 4)
+      putc(0, outfile);
+  }
+}
+
+
+METHODDEF(void)
+finish_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  bmp_dest_ptr dest = (bmp_dest_ptr) dinfo;
+  register FILE * outfile = dest->pub.output_file;
+  JSAMPARRAY image_ptr;
+  register JSAMPROW data_ptr;
+  JDIMENSION row;
+  register JDIMENSION col;
+  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+
+  /* Write the header and colormap */
+  if (dest->is_os2)
+    write_os2_header(cinfo, dest);
+  else
+    write_bmp_header(cinfo, dest);
+
+  /* Write the file body from our virtual array */
+  for (row = cinfo->output_height; row > 0; row--) {
+    if (progress != NULL) {
+      progress->pub.pass_counter = (long) (cinfo->output_height - row);
+      progress->pub.pass_limit = (long) cinfo->output_height;
+      (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+    }
+    image_ptr = (*cinfo->mem->access_virt_sarray)
+      ((j_common_ptr) cinfo, dest->whole_image, row-1, (JDIMENSION) 1, FALSE);
+    data_ptr = image_ptr[0];
+    for (col = dest->row_width; col > 0; col--) {
+      putc(GETJSAMPLE(*data_ptr), outfile);
+      data_ptr++;
+    }
+  }
+  if (progress != NULL)
+    progress->completed_extra_passes++;
+
+  /* Make sure we wrote the output file OK */
+  fflush(outfile);
+  if (ferror(outfile))
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+
+/*
+ * The module selection routine for BMP format output.
+ */
+
+GLOBAL(djpeg_dest_ptr)
+jinit_write_bmp (j_decompress_ptr cinfo, boolean is_os2)
+{
+  bmp_dest_ptr dest;
+  JDIMENSION row_width;
+
+  /* Create module interface object, fill in method pointers */
+  dest = (bmp_dest_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(bmp_dest_struct));
+  dest->pub.start_output = start_output_bmp;
+  dest->pub.finish_output = finish_output_bmp;
+  dest->is_os2 = is_os2;
+
+  if (cinfo->out_color_space == JCS_GRAYSCALE) {
+    dest->pub.put_pixel_rows = put_gray_rows;
+  } else if (cinfo->out_color_space == JCS_RGB) {
+    if (cinfo->quantize_colors)
+      dest->pub.put_pixel_rows = put_gray_rows;
+    else
+      dest->pub.put_pixel_rows = put_pixel_rows;
+  } else {
+    ERREXIT(cinfo, JERR_BMP_COLORSPACE);
+  }
+
+  /* Calculate output image dimensions so we can allocate space */
+  jpeg_calc_output_dimensions(cinfo);
+
+  /* Determine width of rows in the BMP file (padded to 4-byte boundary). */
+  row_width = cinfo->output_width * cinfo->output_components;
+  dest->data_width = row_width;
+  while ((row_width & 3) != 0) row_width++;
+  dest->row_width = row_width;
+  dest->pad_bytes = (int) (row_width - dest->data_width);
+
+  /* Allocate space for inversion array, prepare for write pass */
+  dest->whole_image = (*cinfo->mem->request_virt_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+     row_width, cinfo->output_height, (JDIMENSION) 1);
+  dest->cur_output_row = 0;
+  if (cinfo->progress != NULL) {
+    cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+    progress->total_extra_passes++; /* count file input as separate pass */
+  }
+
+  /* Create decompressor output buffer. */
+  dest->pub.buffer = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, row_width, (JDIMENSION) 1);
+  dest->pub.buffer_height = 1;
+
+  return (djpeg_dest_ptr) dest;
+}
+
+#endif /* BMP_SUPPORTED */
diff --git a/jpeg-8d/wrgif.c b/jpeg-8d/wrgif.c
new file mode 100644
index 0000000..5fe8328
--- /dev/null
+++ b/jpeg-8d/wrgif.c
@@ -0,0 +1,399 @@
+/*
+ * wrgif.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to write output images in GIF format.
+ *
+ **************************************************************************
+ * NOTE: to avoid entanglements with Unisys' patent on LZW compression,   *
+ * this code has been modified to output "uncompressed GIF" files.        *
+ * There is no trace of the LZW algorithm in this file.                   *
+ **************************************************************************
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume output to
+ * an ordinary stdio stream.
+ */
+
+/*
+ * This code is loosely based on ppmtogif from the PBMPLUS distribution
+ * of Feb. 1991.  That file contains the following copyright notice:
+ *    Based on GIFENCODE by David Rowley <mgardi@watdscu.waterloo.edu>.
+ *    Lempel-Ziv compression based on "compress" by Spencer W. Thomas et al.
+ *    Copyright (C) 1989 by Jef Poskanzer.
+ *    Permission to use, copy, modify, and distribute this software and its
+ *    documentation for any purpose and without fee is hereby granted, provided
+ *    that the above copyright notice appear in all copies and that both that
+ *    copyright notice and this permission notice appear in supporting
+ *    documentation.  This software is provided "as is" without express or
+ *    implied warranty.
+ *
+ * We are also required to state that
+ *    "The Graphics Interchange Format(c) is the Copyright property of
+ *    CompuServe Incorporated. GIF(sm) is a Service Mark property of
+ *    CompuServe Incorporated."
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef GIF_SUPPORTED
+
+
+/* Private version of data destination object */
+
+typedef struct {
+  struct djpeg_dest_struct pub;	/* public fields */
+
+  j_decompress_ptr cinfo;	/* back link saves passing separate parm */
+
+  /* State for packing variable-width codes into a bitstream */
+  int n_bits;			/* current number of bits/code */
+  int maxcode;			/* maximum code, given n_bits */
+  INT32 cur_accum;		/* holds bits not yet output */
+  int cur_bits;			/* # of bits in cur_accum */
+
+  /* State for GIF code assignment */
+  int ClearCode;		/* clear code (doesn't change) */
+  int EOFCode;			/* EOF code (ditto) */
+  int code_counter;		/* counts output symbols */
+
+  /* GIF data packet construction buffer */
+  int bytesinpkt;		/* # of bytes in current packet */
+  char packetbuf[256];		/* workspace for accumulating packet */
+
+} gif_dest_struct;
+
+typedef gif_dest_struct * gif_dest_ptr;
+
+/* Largest value that will fit in N bits */
+#define MAXCODE(n_bits)	((1 << (n_bits)) - 1)
+
+
+/*
+ * Routines to package finished data bytes into GIF data blocks.
+ * A data block consists of a count byte (1..255) and that many data bytes.
+ */
+
+LOCAL(void)
+flush_packet (gif_dest_ptr dinfo)
+/* flush any accumulated data */
+{
+  if (dinfo->bytesinpkt > 0) {	/* never write zero-length packet */
+    dinfo->packetbuf[0] = (char) dinfo->bytesinpkt++;
+    if (JFWRITE(dinfo->pub.output_file, dinfo->packetbuf, dinfo->bytesinpkt)
+	!= (size_t) dinfo->bytesinpkt)
+      ERREXIT(dinfo->cinfo, JERR_FILE_WRITE);
+    dinfo->bytesinpkt = 0;
+  }
+}
+
+
+/* Add a character to current packet; flush to disk if necessary */
+#define CHAR_OUT(dinfo,c)  \
+	{ (dinfo)->packetbuf[++(dinfo)->bytesinpkt] = (char) (c);  \
+	    if ((dinfo)->bytesinpkt >= 255)  \
+	      flush_packet(dinfo);  \
+	}
+
+
+/* Routine to convert variable-width codes into a byte stream */
+
+LOCAL(void)
+output (gif_dest_ptr dinfo, int code)
+/* Emit a code of n_bits bits */
+/* Uses cur_accum and cur_bits to reblock into 8-bit bytes */
+{
+  dinfo->cur_accum |= ((INT32) code) << dinfo->cur_bits;
+  dinfo->cur_bits += dinfo->n_bits;
+
+  while (dinfo->cur_bits >= 8) {
+    CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF);
+    dinfo->cur_accum >>= 8;
+    dinfo->cur_bits -= 8;
+  }
+}
+
+
+/* The pseudo-compression algorithm.
+ *
+ * In this module we simply output each pixel value as a separate symbol;
+ * thus, no compression occurs.  In fact, there is expansion of one bit per
+ * pixel, because we use a symbol width one bit wider than the pixel width.
+ *
+ * GIF ordinarily uses variable-width symbols, and the decoder will expect
+ * to ratchet up the symbol width after a fixed number of symbols.
+ * To simplify the logic and keep the expansion penalty down, we emit a
+ * GIF Clear code to reset the decoder just before the width would ratchet up.
+ * Thus, all the symbols in the output file will have the same bit width.
+ * Note that emitting the Clear codes at the right times is a mere matter of
+ * counting output symbols and is in no way dependent on the LZW patent.
+ *
+ * With a small basic pixel width (low color count), Clear codes will be
+ * needed very frequently, causing the file to expand even more.  So this
+ * simplistic approach wouldn't work too well on bilevel images, for example.
+ * But for output of JPEG conversions the pixel width will usually be 8 bits
+ * (129 to 256 colors), so the overhead added by Clear symbols is only about
+ * one symbol in every 256.
+ */
+
+LOCAL(void)
+compress_init (gif_dest_ptr dinfo, int i_bits)
+/* Initialize pseudo-compressor */
+{
+  /* init all the state variables */
+  dinfo->n_bits = i_bits;
+  dinfo->maxcode = MAXCODE(dinfo->n_bits);
+  dinfo->ClearCode = (1 << (i_bits - 1));
+  dinfo->EOFCode = dinfo->ClearCode + 1;
+  dinfo->code_counter = dinfo->ClearCode + 2;
+  /* init output buffering vars */
+  dinfo->bytesinpkt = 0;
+  dinfo->cur_accum = 0;
+  dinfo->cur_bits = 0;
+  /* GIF specifies an initial Clear code */
+  output(dinfo, dinfo->ClearCode);
+}
+
+
+LOCAL(void)
+compress_pixel (gif_dest_ptr dinfo, int c)
+/* Accept and "compress" one pixel value.
+ * The given value must be less than n_bits wide.
+ */
+{
+  /* Output the given pixel value as a symbol. */
+  output(dinfo, c);
+  /* Issue Clear codes often enough to keep the reader from ratcheting up
+   * its symbol size.
+   */
+  if (dinfo->code_counter < dinfo->maxcode) {
+    dinfo->code_counter++;
+  } else {
+    output(dinfo, dinfo->ClearCode);
+    dinfo->code_counter = dinfo->ClearCode + 2;	/* reset the counter */
+  }
+}
+
+
+LOCAL(void)
+compress_term (gif_dest_ptr dinfo)
+/* Clean up at end */
+{
+  /* Send an EOF code */
+  output(dinfo, dinfo->EOFCode);
+  /* Flush the bit-packing buffer */
+  if (dinfo->cur_bits > 0) {
+    CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF);
+  }
+  /* Flush the packet buffer */
+  flush_packet(dinfo);
+}
+
+
+/* GIF header construction */
+
+
+LOCAL(void)
+put_word (gif_dest_ptr dinfo, unsigned int w)
+/* Emit a 16-bit word, LSB first */
+{
+  putc(w & 0xFF, dinfo->pub.output_file);
+  putc((w >> 8) & 0xFF, dinfo->pub.output_file);
+}
+
+
+LOCAL(void)
+put_3bytes (gif_dest_ptr dinfo, int val)
+/* Emit 3 copies of same byte value --- handy subr for colormap construction */
+{
+  putc(val, dinfo->pub.output_file);
+  putc(val, dinfo->pub.output_file);
+  putc(val, dinfo->pub.output_file);
+}
+
+
+LOCAL(void)
+emit_header (gif_dest_ptr dinfo, int num_colors, JSAMPARRAY colormap)
+/* Output the GIF file header, including color map */
+/* If colormap==NULL, synthesize a gray-scale colormap */
+{
+  int BitsPerPixel, ColorMapSize, InitCodeSize, FlagByte;
+  int cshift = dinfo->cinfo->data_precision - 8;
+  int i;
+
+  if (num_colors > 256)
+    ERREXIT1(dinfo->cinfo, JERR_TOO_MANY_COLORS, num_colors);
+  /* Compute bits/pixel and related values */
+  BitsPerPixel = 1;
+  while (num_colors > (1 << BitsPerPixel))
+    BitsPerPixel++;
+  ColorMapSize = 1 << BitsPerPixel;
+  if (BitsPerPixel <= 1)
+    InitCodeSize = 2;
+  else
+    InitCodeSize = BitsPerPixel;
+  /*
+   * Write the GIF header.
+   * Note that we generate a plain GIF87 header for maximum compatibility.
+   */
+  putc('G', dinfo->pub.output_file);
+  putc('I', dinfo->pub.output_file);
+  putc('F', dinfo->pub.output_file);
+  putc('8', dinfo->pub.output_file);
+  putc('7', dinfo->pub.output_file);
+  putc('a', dinfo->pub.output_file);
+  /* Write the Logical Screen Descriptor */
+  put_word(dinfo, (unsigned int) dinfo->cinfo->output_width);
+  put_word(dinfo, (unsigned int) dinfo->cinfo->output_height);
+  FlagByte = 0x80;		/* Yes, there is a global color table */
+  FlagByte |= (BitsPerPixel-1) << 4; /* color resolution */
+  FlagByte |= (BitsPerPixel-1);	/* size of global color table */
+  putc(FlagByte, dinfo->pub.output_file);
+  putc(0, dinfo->pub.output_file); /* Background color index */
+  putc(0, dinfo->pub.output_file); /* Reserved (aspect ratio in GIF89) */
+  /* Write the Global Color Map */
+  /* If the color map is more than 8 bits precision, */
+  /* we reduce it to 8 bits by shifting */
+  for (i=0; i < ColorMapSize; i++) {
+    if (i < num_colors) {
+      if (colormap != NULL) {
+	if (dinfo->cinfo->out_color_space == JCS_RGB) {
+	  /* Normal case: RGB color map */
+	  putc(GETJSAMPLE(colormap[0][i]) >> cshift, dinfo->pub.output_file);
+	  putc(GETJSAMPLE(colormap[1][i]) >> cshift, dinfo->pub.output_file);
+	  putc(GETJSAMPLE(colormap[2][i]) >> cshift, dinfo->pub.output_file);
+	} else {
+	  /* Grayscale "color map": possible if quantizing grayscale image */
+	  put_3bytes(dinfo, GETJSAMPLE(colormap[0][i]) >> cshift);
+	}
+      } else {
+	/* Create a gray-scale map of num_colors values, range 0..255 */
+	put_3bytes(dinfo, (i * 255 + (num_colors-1)/2) / (num_colors-1));
+      }
+    } else {
+      /* fill out the map to a power of 2 */
+      put_3bytes(dinfo, 0);
+    }
+  }
+  /* Write image separator and Image Descriptor */
+  putc(',', dinfo->pub.output_file); /* separator */
+  put_word(dinfo, 0);		/* left/top offset */
+  put_word(dinfo, 0);
+  put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); /* image size */
+  put_word(dinfo, (unsigned int) dinfo->cinfo->output_height);
+  /* flag byte: not interlaced, no local color map */
+  putc(0x00, dinfo->pub.output_file);
+  /* Write Initial Code Size byte */
+  putc(InitCodeSize, dinfo->pub.output_file);
+
+  /* Initialize for "compression" of image data */
+  compress_init(dinfo, InitCodeSize+1);
+}
+
+
+/*
+ * Startup: write the file header.
+ */
+
+METHODDEF(void)
+start_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  gif_dest_ptr dest = (gif_dest_ptr) dinfo;
+
+  if (cinfo->quantize_colors)
+    emit_header(dest, cinfo->actual_number_of_colors, cinfo->colormap);
+  else
+    emit_header(dest, 256, (JSAMPARRAY) NULL);
+}
+
+
+/*
+ * Write some pixel data.
+ * In this module rows_supplied will always be 1.
+ */
+
+METHODDEF(void)
+put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		JDIMENSION rows_supplied)
+{
+  gif_dest_ptr dest = (gif_dest_ptr) dinfo;
+  register JSAMPROW ptr;
+  register JDIMENSION col;
+
+  ptr = dest->pub.buffer[0];
+  for (col = cinfo->output_width; col > 0; col--) {
+    compress_pixel(dest, GETJSAMPLE(*ptr++));
+  }
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  gif_dest_ptr dest = (gif_dest_ptr) dinfo;
+
+  /* Flush "compression" mechanism */
+  compress_term(dest);
+  /* Write a zero-length data block to end the series */
+  putc(0, dest->pub.output_file);
+  /* Write the GIF terminator mark */
+  putc(';', dest->pub.output_file);
+  /* Make sure we wrote the output file OK */
+  fflush(dest->pub.output_file);
+  if (ferror(dest->pub.output_file))
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+
+/*
+ * The module selection routine for GIF format output.
+ */
+
+GLOBAL(djpeg_dest_ptr)
+jinit_write_gif (j_decompress_ptr cinfo)
+{
+  gif_dest_ptr dest;
+
+  /* Create module interface object, fill in method pointers */
+  dest = (gif_dest_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(gif_dest_struct));
+  dest->cinfo = cinfo;		/* make back link for subroutines */
+  dest->pub.start_output = start_output_gif;
+  dest->pub.put_pixel_rows = put_pixel_rows;
+  dest->pub.finish_output = finish_output_gif;
+
+  if (cinfo->out_color_space != JCS_GRAYSCALE &&
+      cinfo->out_color_space != JCS_RGB)
+    ERREXIT(cinfo, JERR_GIF_COLORSPACE);
+
+  /* Force quantization if color or if > 8 bits input */
+  if (cinfo->out_color_space != JCS_GRAYSCALE || cinfo->data_precision > 8) {
+    /* Force quantization to at most 256 colors */
+    cinfo->quantize_colors = TRUE;
+    if (cinfo->desired_number_of_colors > 256)
+      cinfo->desired_number_of_colors = 256;
+  }
+
+  /* Calculate output image dimensions so we can allocate space */
+  jpeg_calc_output_dimensions(cinfo);
+
+  if (cinfo->output_components != 1) /* safety check: just one component? */
+    ERREXIT(cinfo, JERR_GIF_BUG);
+
+  /* Create decompressor output buffer. */
+  dest->pub.buffer = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, cinfo->output_width, (JDIMENSION) 1);
+  dest->pub.buffer_height = 1;
+
+  return (djpeg_dest_ptr) dest;
+}
+
+#endif /* GIF_SUPPORTED */
diff --git a/jpeg-8d/wrjpgcom.1 b/jpeg-8d/wrjpgcom.1
new file mode 100644
index 0000000..d419a99
--- /dev/null
+++ b/jpeg-8d/wrjpgcom.1
@@ -0,0 +1,103 @@
+.TH WRJPGCOM 1 "15 June 1995"
+.SH NAME
+wrjpgcom \- insert text comments into a JPEG file
+.SH SYNOPSIS
+.B wrjpgcom
+[
+.B \-replace
+]
+[
+.BI \-comment " text"
+]
+[
+.BI \-cfile " name"
+]
+[
+.I filename
+]
+.LP
+.SH DESCRIPTION
+.LP
+.B wrjpgcom
+reads the named JPEG/JFIF file, or the standard input if no file is named,
+and generates a new JPEG/JFIF file on standard output.  A comment block is
+added to the file.
+.PP
+The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file.
+Although the standard doesn't actually define what COM blocks are for, they
+are widely used to hold user-supplied text strings.  This lets you add
+annotations, titles, index terms, etc to your JPEG files, and later retrieve
+them as text.  COM blocks do not interfere with the image stored in the JPEG
+file.  The maximum size of a COM block is 64K, but you can have as many of
+them as you like in one JPEG file.
+.PP
+.B wrjpgcom
+adds a COM block, containing text you provide, to a JPEG file.
+Ordinarily, the COM block is added after any existing COM blocks; but you
+can delete the old COM blocks if you wish.
+.SH OPTIONS
+Switch names may be abbreviated, and are not case sensitive.
+.TP
+.B \-replace
+Delete any existing COM blocks from the file.
+.TP
+.BI \-comment " text"
+Supply text for new COM block on command line.
+.TP
+.BI \-cfile " name"
+Read text for new COM block from named file.
+.PP
+If you have only one line of comment text to add, you can provide it on the
+command line with
+.BR \-comment .
+The comment text must be surrounded with quotes so that it is treated as a
+single argument.  Longer comments can be read from a text file.
+.PP
+If you give neither
+.B \-comment
+nor
+.BR \-cfile ,
+then
+.B wrjpgcom
+will read the comment text from standard input.  (In this case an input image
+file name MUST be supplied, so that the source JPEG file comes from somewhere
+else.)  You can enter multiple lines, up to 64KB worth.  Type an end-of-file
+indicator (usually control-D) to terminate the comment text entry.
+.PP
+.B wrjpgcom
+will not add a COM block if the provided comment string is empty.  Therefore
+\fB\-replace \-comment ""\fR can be used to delete all COM blocks from a file.
+.SH EXAMPLES
+.LP
+Add a short comment to in.jpg, producing out.jpg:
+.IP
+.B wrjpgcom \-c
+\fI"View of my back yard" in.jpg
+.B >
+.I out.jpg
+.PP
+Attach a long comment previously stored in comment.txt:
+.IP
+.B wrjpgcom
+.I in.jpg
+.B <
+.I comment.txt
+.B >
+.I out.jpg
+.PP
+or equivalently
+.IP
+.B wrjpgcom
+.B -cfile
+.I comment.txt
+.B <
+.I in.jpg
+.B >
+.I out.jpg
+.SH SEE ALSO
+.BR cjpeg (1),
+.BR djpeg (1),
+.BR jpegtran (1),
+.BR rdjpgcom (1)
+.SH AUTHOR
+Independent JPEG Group
diff --git a/jpeg-8d/wrjpgcom.c b/jpeg-8d/wrjpgcom.c
new file mode 100644
index 0000000..8c04b05
--- /dev/null
+++ b/jpeg-8d/wrjpgcom.c
@@ -0,0 +1,583 @@
+/*
+ * wrjpgcom.c
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a very simple stand-alone application that inserts
+ * user-supplied text as a COM (comment) marker in a JFIF file.
+ * This may be useful as an example of the minimum logic needed to parse
+ * JPEG markers.
+ */
+
+#define JPEG_CJPEG_DJPEG	/* to get the command-line config symbols */
+#include "jinclude.h"		/* get auto-config symbols, <stdio.h> */
+
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc() */
+extern void * malloc ();
+#endif
+#include <ctype.h>		/* to declare isupper(), tolower() */
+#ifdef USE_SETMODE
+#include <fcntl.h>		/* to declare setmode()'s parameter macros */
+/* If you have setmode() but not <io.h>, just delete this line: */
+#include <io.h>			/* to declare setmode() */
+#endif
+
+#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
+#ifdef __MWERKS__
+#include <SIOUX.h>              /* Metrowerks needs this */
+#include <console.h>		/* ... and this */
+#endif
+#ifdef THINK_C
+#include <console.h>		/* Think declares it here */
+#endif
+#endif
+
+#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
+#define READ_BINARY	"r"
+#define WRITE_BINARY	"w"
+#else
+#ifdef VMS			/* VMS is very nonstandard */
+#define READ_BINARY	"rb", "ctx=stm"
+#define WRITE_BINARY	"wb", "ctx=stm"
+#else				/* standard ANSI-compliant case */
+#define READ_BINARY	"rb"
+#define WRITE_BINARY	"wb"
+#endif
+#endif
+
+#ifndef EXIT_FAILURE		/* define exit() codes if not provided */
+#define EXIT_FAILURE  1
+#endif
+#ifndef EXIT_SUCCESS
+#ifdef VMS
+#define EXIT_SUCCESS  1		/* VMS is very nonstandard */
+#else
+#define EXIT_SUCCESS  0
+#endif
+#endif
+
+/* Reduce this value if your malloc() can't allocate blocks up to 64K.
+ * On DOS, compiling in large model is usually a better solution.
+ */
+
+#ifndef MAX_COM_LENGTH
+#define MAX_COM_LENGTH 65000L	/* must be <= 65533 in any case */
+#endif
+
+
+/*
+ * These macros are used to read the input file and write the output file.
+ * To reuse this code in another application, you might need to change these.
+ */
+
+static FILE * infile;		/* input JPEG file */
+
+/* Return next input byte, or EOF if no more */
+#define NEXTBYTE()  getc(infile)
+
+static FILE * outfile;		/* output JPEG file */
+
+/* Emit an output byte */
+#define PUTBYTE(x)  putc((x), outfile)
+
+
+/* Error exit handler */
+#define ERREXIT(msg)  (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE))
+
+
+/* Read one byte, testing for EOF */
+static int
+read_1_byte (void)
+{
+  int c;
+
+  c = NEXTBYTE();
+  if (c == EOF)
+    ERREXIT("Premature EOF in JPEG file");
+  return c;
+}
+
+/* Read 2 bytes, convert to unsigned int */
+/* All 2-byte quantities in JPEG markers are MSB first */
+static unsigned int
+read_2_bytes (void)
+{
+  int c1, c2;
+
+  c1 = NEXTBYTE();
+  if (c1 == EOF)
+    ERREXIT("Premature EOF in JPEG file");
+  c2 = NEXTBYTE();
+  if (c2 == EOF)
+    ERREXIT("Premature EOF in JPEG file");
+  return (((unsigned int) c1) << 8) + ((unsigned int) c2);
+}
+
+
+/* Routines to write data to output file */
+
+static void
+write_1_byte (int c)
+{
+  PUTBYTE(c);
+}
+
+static void
+write_2_bytes (unsigned int val)
+{
+  PUTBYTE((val >> 8) & 0xFF);
+  PUTBYTE(val & 0xFF);
+}
+
+static void
+write_marker (int marker)
+{
+  PUTBYTE(0xFF);
+  PUTBYTE(marker);
+}
+
+static void
+copy_rest_of_file (void)
+{
+  int c;
+
+  while ((c = NEXTBYTE()) != EOF)
+    PUTBYTE(c);
+}
+
+
+/*
+ * JPEG markers consist of one or more 0xFF bytes, followed by a marker
+ * code byte (which is not an FF).  Here are the marker codes of interest
+ * in this program.  (See jdmarker.c for a more complete list.)
+ */
+
+#define M_SOF0  0xC0		/* Start Of Frame N */
+#define M_SOF1  0xC1		/* N indicates which compression process */
+#define M_SOF2  0xC2		/* Only SOF0-SOF2 are now in common use */
+#define M_SOF3  0xC3
+#define M_SOF5  0xC5		/* NB: codes C4 and CC are NOT SOF markers */
+#define M_SOF6  0xC6
+#define M_SOF7  0xC7
+#define M_SOF9  0xC9
+#define M_SOF10 0xCA
+#define M_SOF11 0xCB
+#define M_SOF13 0xCD
+#define M_SOF14 0xCE
+#define M_SOF15 0xCF
+#define M_SOI   0xD8		/* Start Of Image (beginning of datastream) */
+#define M_EOI   0xD9		/* End Of Image (end of datastream) */
+#define M_SOS   0xDA		/* Start Of Scan (begins compressed data) */
+#define M_COM   0xFE		/* COMment */
+
+
+/*
+ * Find the next JPEG marker and return its marker code.
+ * We expect at least one FF byte, possibly more if the compressor used FFs
+ * to pad the file.  (Padding FFs will NOT be replicated in the output file.)
+ * There could also be non-FF garbage between markers.  The treatment of such
+ * garbage is unspecified; we choose to skip over it but emit a warning msg.
+ * NB: this routine must not be used after seeing SOS marker, since it will
+ * not deal correctly with FF/00 sequences in the compressed image data...
+ */
+
+static int
+next_marker (void)
+{
+  int c;
+  int discarded_bytes = 0;
+
+  /* Find 0xFF byte; count and skip any non-FFs. */
+  c = read_1_byte();
+  while (c != 0xFF) {
+    discarded_bytes++;
+    c = read_1_byte();
+  }
+  /* Get marker code byte, swallowing any duplicate FF bytes.  Extra FFs
+   * are legal as pad bytes, so don't count them in discarded_bytes.
+   */
+  do {
+    c = read_1_byte();
+  } while (c == 0xFF);
+
+  if (discarded_bytes != 0) {
+    fprintf(stderr, "Warning: garbage data found in JPEG file\n");
+  }
+
+  return c;
+}
+
+
+/*
+ * Read the initial marker, which should be SOI.
+ * For a JFIF file, the first two bytes of the file should be literally
+ * 0xFF M_SOI.  To be more general, we could use next_marker, but if the
+ * input file weren't actually JPEG at all, next_marker might read the whole
+ * file and then return a misleading error message...
+ */
+
+static int
+first_marker (void)
+{
+  int c1, c2;
+
+  c1 = NEXTBYTE();
+  c2 = NEXTBYTE();
+  if (c1 != 0xFF || c2 != M_SOI)
+    ERREXIT("Not a JPEG file");
+  return c2;
+}
+
+
+/*
+ * Most types of marker are followed by a variable-length parameter segment.
+ * This routine skips over the parameters for any marker we don't otherwise
+ * want to process.
+ * Note that we MUST skip the parameter segment explicitly in order not to
+ * be fooled by 0xFF bytes that might appear within the parameter segment;
+ * such bytes do NOT introduce new markers.
+ */
+
+static void
+copy_variable (void)
+/* Copy an unknown or uninteresting variable-length marker */
+{
+  unsigned int length;
+
+  /* Get the marker parameter length count */
+  length = read_2_bytes();
+  write_2_bytes(length);
+  /* Length includes itself, so must be at least 2 */
+  if (length < 2)
+    ERREXIT("Erroneous JPEG marker length");
+  length -= 2;
+  /* Skip over the remaining bytes */
+  while (length > 0) {
+    write_1_byte(read_1_byte());
+    length--;
+  }
+}
+
+static void
+skip_variable (void)
+/* Skip over an unknown or uninteresting variable-length marker */
+{
+  unsigned int length;
+
+  /* Get the marker parameter length count */
+  length = read_2_bytes();
+  /* Length includes itself, so must be at least 2 */
+  if (length < 2)
+    ERREXIT("Erroneous JPEG marker length");
+  length -= 2;
+  /* Skip over the remaining bytes */
+  while (length > 0) {
+    (void) read_1_byte();
+    length--;
+  }
+}
+
+
+/*
+ * Parse the marker stream until SOFn or EOI is seen;
+ * copy data to output, but discard COM markers unless keep_COM is true.
+ */
+
+static int
+scan_JPEG_header (int keep_COM)
+{
+  int marker;
+
+  /* Expect SOI at start of file */
+  if (first_marker() != M_SOI)
+    ERREXIT("Expected SOI marker first");
+  write_marker(M_SOI);
+
+  /* Scan miscellaneous markers until we reach SOFn. */
+  for (;;) {
+    marker = next_marker();
+    switch (marker) {
+      /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be,
+       * treated as SOFn.  C4 in particular is actually DHT.
+       */
+    case M_SOF0:		/* Baseline */
+    case M_SOF1:		/* Extended sequential, Huffman */
+    case M_SOF2:		/* Progressive, Huffman */
+    case M_SOF3:		/* Lossless, Huffman */
+    case M_SOF5:		/* Differential sequential, Huffman */
+    case M_SOF6:		/* Differential progressive, Huffman */
+    case M_SOF7:		/* Differential lossless, Huffman */
+    case M_SOF9:		/* Extended sequential, arithmetic */
+    case M_SOF10:		/* Progressive, arithmetic */
+    case M_SOF11:		/* Lossless, arithmetic */
+    case M_SOF13:		/* Differential sequential, arithmetic */
+    case M_SOF14:		/* Differential progressive, arithmetic */
+    case M_SOF15:		/* Differential lossless, arithmetic */
+      return marker;
+
+    case M_SOS:			/* should not see compressed data before SOF */
+      ERREXIT("SOS without prior SOFn");
+      break;
+
+    case M_EOI:			/* in case it's a tables-only JPEG stream */
+      return marker;
+
+    case M_COM:			/* Existing COM: conditionally discard */
+      if (keep_COM) {
+	write_marker(marker);
+	copy_variable();
+      } else {
+	skip_variable();
+      }
+      break;
+
+    default:			/* Anything else just gets copied */
+      write_marker(marker);
+      copy_variable();		/* we assume it has a parameter count... */
+      break;
+    }
+  } /* end loop */
+}
+
+
+/* Command line parsing code */
+
+static const char * progname;	/* program name for error messages */
+
+
+static void
+usage (void)
+/* complain about bad command line */
+{
+  fprintf(stderr, "wrjpgcom inserts a textual comment in a JPEG file.\n");
+  fprintf(stderr, "You can add to or replace any existing comment(s).\n");
+
+  fprintf(stderr, "Usage: %s [switches] ", progname);
+#ifdef TWO_FILE_COMMANDLINE
+  fprintf(stderr, "inputfile outputfile\n");
+#else
+  fprintf(stderr, "[inputfile]\n");
+#endif
+
+  fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -replace         Delete any existing comments\n");
+  fprintf(stderr, "  -comment \"text\"  Insert comment with given text\n");
+  fprintf(stderr, "  -cfile name      Read comment from named file\n");
+  fprintf(stderr, "Notice that you must put quotes around the comment text\n");
+  fprintf(stderr, "when you use -comment.\n");
+  fprintf(stderr, "If you do not give either -comment or -cfile on the command line,\n");
+  fprintf(stderr, "then the comment text is read from standard input.\n");
+  fprintf(stderr, "It can be multiple lines, up to %u characters total.\n",
+	  (unsigned int) MAX_COM_LENGTH);
+#ifndef TWO_FILE_COMMANDLINE
+  fprintf(stderr, "You must specify an input JPEG file name when supplying\n");
+  fprintf(stderr, "comment text from standard input.\n");
+#endif
+
+  exit(EXIT_FAILURE);
+}
+
+
+static int
+keymatch (char * arg, const char * keyword, int minchars)
+/* Case-insensitive matching of (possibly abbreviated) keyword switches. */
+/* keyword is the constant keyword (must be lower case already), */
+/* minchars is length of minimum legal abbreviation. */
+{
+  register int ca, ck;
+  register int nmatched = 0;
+
+  while ((ca = *arg++) != '\0') {
+    if ((ck = *keyword++) == '\0')
+      return 0;			/* arg longer than keyword, no good */
+    if (isupper(ca))		/* force arg to lcase (assume ck is already) */
+      ca = tolower(ca);
+    if (ca != ck)
+      return 0;			/* no good */
+    nmatched++;			/* count matched characters */
+  }
+  /* reached end of argument; fail if it's too short for unique abbrev */
+  if (nmatched < minchars)
+    return 0;
+  return 1;			/* A-OK */
+}
+
+
+/*
+ * The main program.
+ */
+
+int
+main (int argc, char **argv)
+{
+  int argn;
+  char * arg;
+  int keep_COM = 1;
+  char * comment_arg = NULL;
+  FILE * comment_file = NULL;
+  unsigned int comment_length = 0;
+  int marker;
+
+  /* On Mac, fetch a command line. */
+#ifdef USE_CCOMMAND
+  argc = ccommand(&argv);
+#endif
+
+  progname = argv[0];
+  if (progname == NULL || progname[0] == 0)
+    progname = "wrjpgcom";	/* in case C library doesn't provide it */
+
+  /* Parse switches, if any */
+  for (argn = 1; argn < argc; argn++) {
+    arg = argv[argn];
+    if (arg[0] != '-')
+      break;			/* not switch, must be file name */
+    arg++;			/* advance over '-' */
+    if (keymatch(arg, "replace", 1)) {
+      keep_COM = 0;
+    } else if (keymatch(arg, "cfile", 2)) {
+      if (++argn >= argc) usage();
+      if ((comment_file = fopen(argv[argn], "r")) == NULL) {
+	fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
+	exit(EXIT_FAILURE);
+      }
+    } else if (keymatch(arg, "comment", 1)) {
+      if (++argn >= argc) usage();
+      comment_arg = argv[argn];
+      /* If the comment text starts with '"', then we are probably running
+       * under MS-DOG and must parse out the quoted string ourselves.  Sigh.
+       */
+      if (comment_arg[0] == '"') {
+	comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH);
+	if (comment_arg == NULL)
+	  ERREXIT("Insufficient memory");
+	strcpy(comment_arg, argv[argn]+1);
+	for (;;) {
+	  comment_length = (unsigned int) strlen(comment_arg);
+	  if (comment_length > 0 && comment_arg[comment_length-1] == '"') {
+	    comment_arg[comment_length-1] = '\0'; /* zap terminating quote */
+	    break;
+	  }
+	  if (++argn >= argc)
+	    ERREXIT("Missing ending quote mark");
+	  strcat(comment_arg, " ");
+	  strcat(comment_arg, argv[argn]);
+	}
+      }
+      comment_length = (unsigned int) strlen(comment_arg);
+    } else
+      usage();
+  }
+
+  /* Cannot use both -comment and -cfile. */
+  if (comment_arg != NULL && comment_file != NULL)
+    usage();
+  /* If there is neither -comment nor -cfile, we will read the comment text
+   * from stdin; in this case there MUST be an input JPEG file name.
+   */
+  if (comment_arg == NULL && comment_file == NULL && argn >= argc)
+    usage();
+
+  /* Open the input file. */
+  if (argn < argc) {
+    if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default input file is stdin */
+#ifdef USE_SETMODE		/* need to hack file mode? */
+    setmode(fileno(stdin), O_BINARY);
+#endif
+#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
+    if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open stdin\n", progname);
+      exit(EXIT_FAILURE);
+    }
+#else
+    infile = stdin;
+#endif
+  }
+
+  /* Open the output file. */
+#ifdef TWO_FILE_COMMANDLINE
+  /* Must have explicit output file name */
+  if (argn != argc-2) {
+    fprintf(stderr, "%s: must name one input and one output file\n",
+	    progname);
+    usage();
+  }
+  if ((outfile = fopen(argv[argn+1], WRITE_BINARY)) == NULL) {
+    fprintf(stderr, "%s: can't open %s\n", progname, argv[argn+1]);
+    exit(EXIT_FAILURE);
+  }
+#else
+  /* Unix style: expect zero or one file name */
+  if (argn < argc-1) {
+    fprintf(stderr, "%s: only one input file\n", progname);
+    usage();
+  }
+  /* default output file is stdout */
+#ifdef USE_SETMODE		/* need to hack file mode? */
+  setmode(fileno(stdout), O_BINARY);
+#endif
+#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
+  if ((outfile = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) {
+    fprintf(stderr, "%s: can't open stdout\n", progname);
+    exit(EXIT_FAILURE);
+  }
+#else
+  outfile = stdout;
+#endif
+#endif /* TWO_FILE_COMMANDLINE */
+
+  /* Collect comment text from comment_file or stdin, if necessary */
+  if (comment_arg == NULL) {
+    FILE * src_file;
+    int c;
+
+    comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH);
+    if (comment_arg == NULL)
+      ERREXIT("Insufficient memory");
+    comment_length = 0;
+    src_file = (comment_file != NULL ? comment_file : stdin);
+    while ((c = getc(src_file)) != EOF) {
+      if (comment_length >= (unsigned int) MAX_COM_LENGTH) {
+	fprintf(stderr, "Comment text may not exceed %u bytes\n",
+		(unsigned int) MAX_COM_LENGTH);
+	exit(EXIT_FAILURE);
+      }
+      comment_arg[comment_length++] = (char) c;
+    }
+    if (comment_file != NULL)
+      fclose(comment_file);
+  }
+
+  /* Copy JPEG headers until SOFn marker;
+   * we will insert the new comment marker just before SOFn.
+   * This (a) causes the new comment to appear after, rather than before,
+   * existing comments; and (b) ensures that comments come after any JFIF
+   * or JFXX markers, as required by the JFIF specification.
+   */
+  marker = scan_JPEG_header(keep_COM);
+  /* Insert the new COM marker, but only if nonempty text has been supplied */
+  if (comment_length > 0) {
+    write_marker(M_COM);
+    write_2_bytes(comment_length + 2);
+    while (comment_length > 0) {
+      write_1_byte(*comment_arg++);
+      comment_length--;
+    }
+  }
+  /* Duplicate the remainder of the source file.
+   * Note that any COM markers occuring after SOF will not be touched.
+   */
+  write_marker(marker);
+  copy_rest_of_file();
+
+  /* All done. */
+  exit(EXIT_SUCCESS);
+  return 0;			/* suppress no-return-value warnings */
+}
diff --git a/jpeg-8d/wrppm.c b/jpeg-8d/wrppm.c
new file mode 100644
index 0000000..68e0c85
--- /dev/null
+++ b/jpeg-8d/wrppm.c
@@ -0,0 +1,269 @@
+/*
+ * wrppm.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to write output images in PPM/PGM format.
+ * The extended 2-byte-per-sample raw PPM/PGM formats are supported.
+ * The PBMPLUS library is NOT required to compile this software
+ * (but it is highly useful as a set of PPM image manipulation programs).
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume output to
+ * an ordinary stdio stream.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef PPM_SUPPORTED
+
+
+/*
+ * For 12-bit JPEG data, we either downscale the values to 8 bits
+ * (to write standard byte-per-sample PPM/PGM files), or output
+ * nonstandard word-per-sample PPM/PGM files.  Downscaling is done
+ * if PPM_NORAWWORD is defined (this can be done in the Makefile
+ * or in jconfig.h).
+ * (When the core library supports data precision reduction, a cleaner
+ * implementation will be to ask for that instead.)
+ */
+
+#if BITS_IN_JSAMPLE == 8
+#define PUTPPMSAMPLE(ptr,v)  *ptr++ = (char) (v)
+#define BYTESPERSAMPLE 1
+#define PPM_MAXVAL 255
+#else
+#ifdef PPM_NORAWWORD
+#define PUTPPMSAMPLE(ptr,v)  *ptr++ = (char) ((v) >> (BITS_IN_JSAMPLE-8))
+#define BYTESPERSAMPLE 1
+#define PPM_MAXVAL 255
+#else
+/* The word-per-sample format always puts the MSB first. */
+#define PUTPPMSAMPLE(ptr,v)			\
+	{ register int val_ = v;		\
+	  *ptr++ = (char) ((val_ >> 8) & 0xFF);	\
+	  *ptr++ = (char) (val_ & 0xFF);	\
+	}
+#define BYTESPERSAMPLE 2
+#define PPM_MAXVAL ((1<<BITS_IN_JSAMPLE)-1)
+#endif
+#endif
+
+
+/*
+ * When JSAMPLE is the same size as char, we can just fwrite() the
+ * decompressed data to the PPM or PGM file.  On PCs, in order to make this
+ * work the output buffer must be allocated in near data space, because we are
+ * assuming small-data memory model wherein fwrite() can't reach far memory.
+ * If you need to process very wide images on a PC, you might have to compile
+ * in large-memory model, or else replace fwrite() with a putc() loop ---
+ * which will be much slower.
+ */
+
+
+/* Private version of data destination object */
+
+typedef struct {
+  struct djpeg_dest_struct pub;	/* public fields */
+
+  /* Usually these two pointers point to the same place: */
+  char *iobuffer;		/* fwrite's I/O buffer */
+  JSAMPROW pixrow;		/* decompressor output buffer */
+  size_t buffer_width;		/* width of I/O buffer */
+  JDIMENSION samples_per_row;	/* JSAMPLEs per output row */
+} ppm_dest_struct;
+
+typedef ppm_dest_struct * ppm_dest_ptr;
+
+
+/*
+ * Write some pixel data.
+ * In this module rows_supplied will always be 1.
+ *
+ * put_pixel_rows handles the "normal" 8-bit case where the decompressor
+ * output buffer is physically the same as the fwrite buffer.
+ */
+
+METHODDEF(void)
+put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		JDIMENSION rows_supplied)
+{
+  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
+
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+
+/*
+ * This code is used when we have to copy the data and apply a pixel
+ * format translation.  Typically this only happens in 12-bit mode.
+ */
+
+METHODDEF(void)
+copy_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		 JDIMENSION rows_supplied)
+{
+  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
+  register char * bufferptr;
+  register JSAMPROW ptr;
+  register JDIMENSION col;
+
+  ptr = dest->pub.buffer[0];
+  bufferptr = dest->iobuffer;
+  for (col = dest->samples_per_row; col > 0; col--) {
+    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(*ptr++));
+  }
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+
+/*
+ * Write some pixel data when color quantization is in effect.
+ * We have to demap the color index values to straight data.
+ */
+
+METHODDEF(void)
+put_demapped_rgb (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		  JDIMENSION rows_supplied)
+{
+  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
+  register char * bufferptr;
+  register int pixval;
+  register JSAMPROW ptr;
+  register JSAMPROW color_map0 = cinfo->colormap[0];
+  register JSAMPROW color_map1 = cinfo->colormap[1];
+  register JSAMPROW color_map2 = cinfo->colormap[2];
+  register JDIMENSION col;
+
+  ptr = dest->pub.buffer[0];
+  bufferptr = dest->iobuffer;
+  for (col = cinfo->output_width; col > 0; col--) {
+    pixval = GETJSAMPLE(*ptr++);
+    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map0[pixval]));
+    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map1[pixval]));
+    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map2[pixval]));
+  }
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+
+METHODDEF(void)
+put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		   JDIMENSION rows_supplied)
+{
+  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
+  register char * bufferptr;
+  register JSAMPROW ptr;
+  register JSAMPROW color_map = cinfo->colormap[0];
+  register JDIMENSION col;
+
+  ptr = dest->pub.buffer[0];
+  bufferptr = dest->iobuffer;
+  for (col = cinfo->output_width; col > 0; col--) {
+    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map[GETJSAMPLE(*ptr++)]));
+  }
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+
+/*
+ * Startup: write the file header.
+ */
+
+METHODDEF(void)
+start_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
+
+  /* Emit file header */
+  switch (cinfo->out_color_space) {
+  case JCS_GRAYSCALE:
+    /* emit header for raw PGM format */
+    fprintf(dest->pub.output_file, "P5\n%ld %ld\n%d\n",
+	    (long) cinfo->output_width, (long) cinfo->output_height,
+	    PPM_MAXVAL);
+    break;
+  case JCS_RGB:
+    /* emit header for raw PPM format */
+    fprintf(dest->pub.output_file, "P6\n%ld %ld\n%d\n",
+	    (long) cinfo->output_width, (long) cinfo->output_height,
+	    PPM_MAXVAL);
+    break;
+  default:
+    ERREXIT(cinfo, JERR_PPM_COLORSPACE);
+  }
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  /* Make sure we wrote the output file OK */
+  fflush(dinfo->output_file);
+  if (ferror(dinfo->output_file))
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+
+/*
+ * The module selection routine for PPM format output.
+ */
+
+GLOBAL(djpeg_dest_ptr)
+jinit_write_ppm (j_decompress_ptr cinfo)
+{
+  ppm_dest_ptr dest;
+
+  /* Create module interface object, fill in method pointers */
+  dest = (ppm_dest_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(ppm_dest_struct));
+  dest->pub.start_output = start_output_ppm;
+  dest->pub.finish_output = finish_output_ppm;
+
+  /* Calculate output image dimensions so we can allocate space */
+  jpeg_calc_output_dimensions(cinfo);
+
+  /* Create physical I/O buffer.  Note we make this near on a PC. */
+  dest->samples_per_row = cinfo->output_width * cinfo->out_color_components;
+  dest->buffer_width = dest->samples_per_row * (BYTESPERSAMPLE * SIZEOF(char));
+  dest->iobuffer = (char *) (*cinfo->mem->alloc_small)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width);
+
+  if (cinfo->quantize_colors || BITS_IN_JSAMPLE != 8 ||
+      SIZEOF(JSAMPLE) != SIZEOF(char)) {
+    /* When quantizing, we need an output buffer for colormap indexes
+     * that's separate from the physical I/O buffer.  We also need a
+     * separate buffer if pixel format translation must take place.
+     */
+    dest->pub.buffer = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       cinfo->output_width * cinfo->output_components, (JDIMENSION) 1);
+    dest->pub.buffer_height = 1;
+    if (! cinfo->quantize_colors)
+      dest->pub.put_pixel_rows = copy_pixel_rows;
+    else if (cinfo->out_color_space == JCS_GRAYSCALE)
+      dest->pub.put_pixel_rows = put_demapped_gray;
+    else
+      dest->pub.put_pixel_rows = put_demapped_rgb;
+  } else {
+    /* We will fwrite() directly from decompressor output buffer. */
+    /* Synthesize a JSAMPARRAY pointer structure */
+    /* Cast here implies near->far pointer conversion on PCs */
+    dest->pixrow = (JSAMPROW) dest->iobuffer;
+    dest->pub.buffer = & dest->pixrow;
+    dest->pub.buffer_height = 1;
+    dest->pub.put_pixel_rows = put_pixel_rows;
+  }
+
+  return (djpeg_dest_ptr) dest;
+}
+
+#endif /* PPM_SUPPORTED */
diff --git a/jpeg-8d/wrrle.c b/jpeg-8d/wrrle.c
new file mode 100644
index 0000000..a4e7337
--- /dev/null
+++ b/jpeg-8d/wrrle.c
@@ -0,0 +1,305 @@
+/*
+ * wrrle.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to write output images in RLE format.
+ * The Utah Raster Toolkit library is required (version 3.1 or later).
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume output to
+ * an ordinary stdio stream.
+ *
+ * Based on code contributed by Mike Lijewski,
+ * with updates from Robert Hutchinson.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef RLE_SUPPORTED
+
+/* rle.h is provided by the Utah Raster Toolkit. */
+
+#include <rle.h>
+
+/*
+ * We assume that JSAMPLE has the same representation as rle_pixel,
+ * to wit, "unsigned char".  Hence we can't cope with 12- or 16-bit samples.
+ */
+
+#if BITS_IN_JSAMPLE != 8
+  Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
+#endif
+
+
+/*
+ * Since RLE stores scanlines bottom-to-top, we have to invert the image
+ * from JPEG's top-to-bottom order.  To do this, we save the outgoing data
+ * in a virtual array during put_pixel_row calls, then actually emit the
+ * RLE file during finish_output.
+ */
+
+
+/*
+ * For now, if we emit an RLE color map then it is always 256 entries long,
+ * though not all of the entries need be used.
+ */
+
+#define CMAPBITS	8
+#define CMAPLENGTH	(1<<(CMAPBITS))
+
+typedef struct {
+  struct djpeg_dest_struct pub; /* public fields */
+
+  jvirt_sarray_ptr image;	/* virtual array to store the output image */
+  rle_map *colormap;	 	/* RLE-style color map, or NULL if none */
+  rle_pixel **rle_row;		/* To pass rows to rle_putrow() */
+
+} rle_dest_struct;
+
+typedef rle_dest_struct * rle_dest_ptr;
+
+/* Forward declarations */
+METHODDEF(void) rle_put_pixel_rows
+    JPP((j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+	 JDIMENSION rows_supplied));
+
+
+/*
+ * Write the file header.
+ *
+ * In this module it's easier to wait till finish_output to write anything.
+ */
+
+METHODDEF(void)
+start_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  rle_dest_ptr dest = (rle_dest_ptr) dinfo;
+  size_t cmapsize;
+  int i, ci;
+#ifdef PROGRESS_REPORT
+  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+#endif
+
+  /*
+   * Make sure the image can be stored in RLE format.
+   *
+   * - RLE stores image dimensions as *signed* 16 bit integers.  JPEG
+   *   uses unsigned, so we have to check the width.
+   *
+   * - Colorspace is expected to be grayscale or RGB.
+   *
+   * - The number of channels (components) is expected to be 1 (grayscale/
+   *   pseudocolor) or 3 (truecolor/directcolor).
+   *   (could be 2 or 4 if using an alpha channel, but we aren't)
+   */
+
+  if (cinfo->output_width > 32767 || cinfo->output_height > 32767)
+    ERREXIT2(cinfo, JERR_RLE_DIMENSIONS, cinfo->output_width, 
+	     cinfo->output_height);
+
+  if (cinfo->out_color_space != JCS_GRAYSCALE &&
+      cinfo->out_color_space != JCS_RGB)
+    ERREXIT(cinfo, JERR_RLE_COLORSPACE);
+
+  if (cinfo->output_components != 1 && cinfo->output_components != 3)
+    ERREXIT1(cinfo, JERR_RLE_TOOMANYCHANNELS, cinfo->num_components);
+
+  /* Convert colormap, if any, to RLE format. */
+
+  dest->colormap = NULL;
+
+  if (cinfo->quantize_colors) {
+    /* Allocate storage for RLE-style cmap, zero any extra entries */
+    cmapsize = cinfo->out_color_components * CMAPLENGTH * SIZEOF(rle_map);
+    dest->colormap = (rle_map *) (*cinfo->mem->alloc_small)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE, cmapsize);
+    MEMZERO(dest->colormap, cmapsize);
+
+    /* Save away data in RLE format --- note 8-bit left shift! */
+    /* Shifting would need adjustment for JSAMPLEs wider than 8 bits. */
+    for (ci = 0; ci < cinfo->out_color_components; ci++) {
+      for (i = 0; i < cinfo->actual_number_of_colors; i++) {
+        dest->colormap[ci * CMAPLENGTH + i] =
+          GETJSAMPLE(cinfo->colormap[ci][i]) << 8;
+      }
+    }
+  }
+
+  /* Set the output buffer to the first row */
+  dest->pub.buffer = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, dest->image, (JDIMENSION) 0, (JDIMENSION) 1, TRUE);
+  dest->pub.buffer_height = 1;
+
+  dest->pub.put_pixel_rows = rle_put_pixel_rows;
+
+#ifdef PROGRESS_REPORT
+  if (progress != NULL) {
+    progress->total_extra_passes++;  /* count file writing as separate pass */
+  }
+#endif
+}
+
+
+/*
+ * Write some pixel data.
+ *
+ * This routine just saves the data away in a virtual array.
+ */
+
+METHODDEF(void)
+rle_put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		    JDIMENSION rows_supplied)
+{
+  rle_dest_ptr dest = (rle_dest_ptr) dinfo;
+
+  if (cinfo->output_scanline < cinfo->output_height) {
+    dest->pub.buffer = (*cinfo->mem->access_virt_sarray)
+      ((j_common_ptr) cinfo, dest->image,
+       cinfo->output_scanline, (JDIMENSION) 1, TRUE);
+  }
+}
+
+/*
+ * Finish up at the end of the file.
+ *
+ * Here is where we really output the RLE file.
+ */
+
+METHODDEF(void)
+finish_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  rle_dest_ptr dest = (rle_dest_ptr) dinfo;
+  rle_hdr header;		/* Output file information */
+  rle_pixel **rle_row, *red, *green, *blue;
+  JSAMPROW output_row;
+  char cmapcomment[80];
+  int row, col;
+  int ci;
+#ifdef PROGRESS_REPORT
+  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+#endif
+
+  /* Initialize the header info */
+  header = *rle_hdr_init(NULL);
+  header.rle_file = dest->pub.output_file;
+  header.xmin     = 0;
+  header.xmax     = cinfo->output_width  - 1;
+  header.ymin     = 0;
+  header.ymax     = cinfo->output_height - 1;
+  header.alpha    = 0;
+  header.ncolors  = cinfo->output_components;
+  for (ci = 0; ci < cinfo->output_components; ci++) {
+    RLE_SET_BIT(header, ci);
+  }
+  if (cinfo->quantize_colors) {
+    header.ncmap   = cinfo->out_color_components;
+    header.cmaplen = CMAPBITS;
+    header.cmap    = dest->colormap;
+    /* Add a comment to the output image with the true colormap length. */
+    sprintf(cmapcomment, "color_map_length=%d", cinfo->actual_number_of_colors);
+    rle_putcom(cmapcomment, &header);
+  }
+
+  /* Emit the RLE header and color map (if any) */
+  rle_put_setup(&header);
+
+  /* Now output the RLE data from our virtual array.
+   * We assume here that (a) rle_pixel is represented the same as JSAMPLE,
+   * and (b) we are not on a machine where FAR pointers differ from regular.
+   */
+
+#ifdef PROGRESS_REPORT
+  if (progress != NULL) {
+    progress->pub.pass_limit = cinfo->output_height;
+    progress->pub.pass_counter = 0;
+    (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+  }
+#endif
+
+  if (cinfo->output_components == 1) {
+    for (row = cinfo->output_height-1; row >= 0; row--) {
+      rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray)
+        ((j_common_ptr) cinfo, dest->image,
+	 (JDIMENSION) row, (JDIMENSION) 1, FALSE);
+      rle_putrow(rle_row, (int) cinfo->output_width, &header);
+#ifdef PROGRESS_REPORT
+      if (progress != NULL) {
+        progress->pub.pass_counter++;
+        (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+      }
+#endif
+    }
+  } else {
+    for (row = cinfo->output_height-1; row >= 0; row--) {
+      rle_row = (rle_pixel **) dest->rle_row;
+      output_row = * (*cinfo->mem->access_virt_sarray)
+        ((j_common_ptr) cinfo, dest->image,
+	 (JDIMENSION) row, (JDIMENSION) 1, FALSE);
+      red = rle_row[0];
+      green = rle_row[1];
+      blue = rle_row[2];
+      for (col = cinfo->output_width; col > 0; col--) {
+        *red++ = GETJSAMPLE(*output_row++);
+        *green++ = GETJSAMPLE(*output_row++);
+        *blue++ = GETJSAMPLE(*output_row++);
+      }
+      rle_putrow(rle_row, (int) cinfo->output_width, &header);
+#ifdef PROGRESS_REPORT
+      if (progress != NULL) {
+        progress->pub.pass_counter++;
+        (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+      }
+#endif
+    }
+  }
+
+#ifdef PROGRESS_REPORT
+  if (progress != NULL)
+    progress->completed_extra_passes++;
+#endif
+
+  /* Emit file trailer */
+  rle_puteof(&header);
+  fflush(dest->pub.output_file);
+  if (ferror(dest->pub.output_file))
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+
+/*
+ * The module selection routine for RLE format output.
+ */
+
+GLOBAL(djpeg_dest_ptr)
+jinit_write_rle (j_decompress_ptr cinfo)
+{
+  rle_dest_ptr dest;
+
+  /* Create module interface object, fill in method pointers */
+  dest = (rle_dest_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+                                  SIZEOF(rle_dest_struct));
+  dest->pub.start_output = start_output_rle;
+  dest->pub.finish_output = finish_output_rle;
+
+  /* Calculate output image dimensions so we can allocate space */
+  jpeg_calc_output_dimensions(cinfo);
+
+  /* Allocate a work array for output to the RLE library. */
+  dest->rle_row = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE,
+     cinfo->output_width, (JDIMENSION) cinfo->output_components);
+
+  /* Allocate a virtual array to hold the image. */
+  dest->image = (*cinfo->mem->request_virt_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+     (JDIMENSION) (cinfo->output_width * cinfo->output_components),
+     cinfo->output_height, (JDIMENSION) 1);
+
+  return (djpeg_dest_ptr) dest;
+}
+
+#endif /* RLE_SUPPORTED */
diff --git a/jpeg-8d/wrtarga.c b/jpeg-8d/wrtarga.c
new file mode 100644
index 0000000..cf104d2
--- /dev/null
+++ b/jpeg-8d/wrtarga.c
@@ -0,0 +1,253 @@
+/*
+ * wrtarga.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to write output images in Targa format.
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume output to
+ * an ordinary stdio stream.
+ *
+ * Based on code contributed by Lee Daniel Crocker.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef TARGA_SUPPORTED
+
+
+/*
+ * To support 12-bit JPEG data, we'd have to scale output down to 8 bits.
+ * This is not yet implemented.
+ */
+
+#if BITS_IN_JSAMPLE != 8
+  Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
+#endif
+
+/*
+ * The output buffer needs to be writable by fwrite().  On PCs, we must
+ * allocate the buffer in near data space, because we are assuming small-data
+ * memory model, wherein fwrite() can't reach far memory.  If you need to
+ * process very wide images on a PC, you might have to compile in large-memory
+ * model, or else replace fwrite() with a putc() loop --- which will be much
+ * slower.
+ */
+
+
+/* Private version of data destination object */
+
+typedef struct {
+  struct djpeg_dest_struct pub;	/* public fields */
+
+  char *iobuffer;		/* physical I/O buffer */
+  JDIMENSION buffer_width;	/* width of one row */
+} tga_dest_struct;
+
+typedef tga_dest_struct * tga_dest_ptr;
+
+
+LOCAL(void)
+write_header (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, int num_colors)
+/* Create and write a Targa header */
+{
+  char targaheader[18];
+
+  /* Set unused fields of header to 0 */
+  MEMZERO(targaheader, SIZEOF(targaheader));
+
+  if (num_colors > 0) {
+    targaheader[1] = 1;		/* color map type 1 */
+    targaheader[5] = (char) (num_colors & 0xFF);
+    targaheader[6] = (char) (num_colors >> 8);
+    targaheader[7] = 24;	/* 24 bits per cmap entry */
+  }
+
+  targaheader[12] = (char) (cinfo->output_width & 0xFF);
+  targaheader[13] = (char) (cinfo->output_width >> 8);
+  targaheader[14] = (char) (cinfo->output_height & 0xFF);
+  targaheader[15] = (char) (cinfo->output_height >> 8);
+  targaheader[17] = 0x20;	/* Top-down, non-interlaced */
+
+  if (cinfo->out_color_space == JCS_GRAYSCALE) {
+    targaheader[2] = 3;		/* image type = uncompressed gray-scale */
+    targaheader[16] = 8;	/* bits per pixel */
+  } else {			/* must be RGB */
+    if (num_colors > 0) {
+      targaheader[2] = 1;	/* image type = colormapped RGB */
+      targaheader[16] = 8;
+    } else {
+      targaheader[2] = 2;	/* image type = uncompressed RGB */
+      targaheader[16] = 24;
+    }
+  }
+
+  if (JFWRITE(dinfo->output_file, targaheader, 18) != (size_t) 18)
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+
+/*
+ * Write some pixel data.
+ * In this module rows_supplied will always be 1.
+ */
+
+METHODDEF(void)
+put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		JDIMENSION rows_supplied)
+/* used for unquantized full-color output */
+{
+  tga_dest_ptr dest = (tga_dest_ptr) dinfo;
+  register JSAMPROW inptr;
+  register char * outptr;
+  register JDIMENSION col;
+
+  inptr = dest->pub.buffer[0];
+  outptr = dest->iobuffer;
+  for (col = cinfo->output_width; col > 0; col--) {
+    outptr[0] = (char) GETJSAMPLE(inptr[2]); /* RGB to BGR order */
+    outptr[1] = (char) GETJSAMPLE(inptr[1]);
+    outptr[2] = (char) GETJSAMPLE(inptr[0]);
+    inptr += 3, outptr += 3;
+  }
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+METHODDEF(void)
+put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+	       JDIMENSION rows_supplied)
+/* used for grayscale OR quantized color output */
+{
+  tga_dest_ptr dest = (tga_dest_ptr) dinfo;
+  register JSAMPROW inptr;
+  register char * outptr;
+  register JDIMENSION col;
+
+  inptr = dest->pub.buffer[0];
+  outptr = dest->iobuffer;
+  for (col = cinfo->output_width; col > 0; col--) {
+    *outptr++ = (char) GETJSAMPLE(*inptr++);
+  }
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+
+/*
+ * Write some demapped pixel data when color quantization is in effect.
+ * For Targa, this is only applied to grayscale data.
+ */
+
+METHODDEF(void)
+put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		   JDIMENSION rows_supplied)
+{
+  tga_dest_ptr dest = (tga_dest_ptr) dinfo;
+  register JSAMPROW inptr;
+  register char * outptr;
+  register JSAMPROW color_map0 = cinfo->colormap[0];
+  register JDIMENSION col;
+
+  inptr = dest->pub.buffer[0];
+  outptr = dest->iobuffer;
+  for (col = cinfo->output_width; col > 0; col--) {
+    *outptr++ = (char) GETJSAMPLE(color_map0[GETJSAMPLE(*inptr++)]);
+  }
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+
+/*
+ * Startup: write the file header.
+ */
+
+METHODDEF(void)
+start_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  tga_dest_ptr dest = (tga_dest_ptr) dinfo;
+  int num_colors, i;
+  FILE *outfile;
+
+  if (cinfo->out_color_space == JCS_GRAYSCALE) {
+    /* Targa doesn't have a mapped grayscale format, so we will */
+    /* demap quantized gray output.  Never emit a colormap. */
+    write_header(cinfo, dinfo, 0);
+    if (cinfo->quantize_colors)
+      dest->pub.put_pixel_rows = put_demapped_gray;
+    else
+      dest->pub.put_pixel_rows = put_gray_rows;
+  } else if (cinfo->out_color_space == JCS_RGB) {
+    if (cinfo->quantize_colors) {
+      /* We only support 8-bit colormap indexes, so only 256 colors */
+      num_colors = cinfo->actual_number_of_colors;
+      if (num_colors > 256)
+	ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, num_colors);
+      write_header(cinfo, dinfo, num_colors);
+      /* Write the colormap.  Note Targa uses BGR byte order */
+      outfile = dest->pub.output_file;
+      for (i = 0; i < num_colors; i++) {
+	putc(GETJSAMPLE(cinfo->colormap[2][i]), outfile);
+	putc(GETJSAMPLE(cinfo->colormap[1][i]), outfile);
+	putc(GETJSAMPLE(cinfo->colormap[0][i]), outfile);
+      }
+      dest->pub.put_pixel_rows = put_gray_rows;
+    } else {
+      write_header(cinfo, dinfo, 0);
+      dest->pub.put_pixel_rows = put_pixel_rows;
+    }
+  } else {
+    ERREXIT(cinfo, JERR_TGA_COLORSPACE);
+  }
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  /* Make sure we wrote the output file OK */
+  fflush(dinfo->output_file);
+  if (ferror(dinfo->output_file))
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+
+/*
+ * The module selection routine for Targa format output.
+ */
+
+GLOBAL(djpeg_dest_ptr)
+jinit_write_targa (j_decompress_ptr cinfo)
+{
+  tga_dest_ptr dest;
+
+  /* Create module interface object, fill in method pointers */
+  dest = (tga_dest_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(tga_dest_struct));
+  dest->pub.start_output = start_output_tga;
+  dest->pub.finish_output = finish_output_tga;
+
+  /* Calculate output image dimensions so we can allocate space */
+  jpeg_calc_output_dimensions(cinfo);
+
+  /* Create I/O buffer.  Note we make this near on a PC. */
+  dest->buffer_width = cinfo->output_width * cinfo->output_components;
+  dest->iobuffer = (char *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(size_t) (dest->buffer_width * SIZEOF(char)));
+
+  /* Create decompressor output buffer. */
+  dest->pub.buffer = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width, (JDIMENSION) 1);
+  dest->pub.buffer_height = 1;
+
+  return (djpeg_dest_ptr) dest;
+}
+
+#endif /* TARGA_SUPPORTED */
-- 
1.6.1.3

