#
# Automatically generated make config: don't edit
#
CONFIG_HAS_SHARED_GRFPU=y

#
# Synthesis      
#
# CONFIG_SYN_INFERRED is not set
# CONFIG_SYN_AXCEL is not set
# CONFIG_SYN_AXDSP is not set
# CONFIG_SYN_FUSION is not set
# CONFIG_SYN_PROASIC is not set
# CONFIG_SYN_PROASICPLUS is not set
# CONFIG_SYN_PROASIC3 is not set
# CONFIG_SYN_PROASIC3E is not set
# CONFIG_SYN_PROASIC3L is not set
# CONFIG_SYN_IGLOO is not set
# CONFIG_SYN_IGLOO2 is not set
# CONFIG_SYN_SF2 is not set
# CONFIG_SYN_RTG4 is not set
# CONFIG_SYN_POLARFIRE is not set
# CONFIG_SYN_UT130HBD is not set
# CONFIG_SYN_UT90NHBD is not set
# CONFIG_SYN_CYCLONEIII is not set
# CONFIG_SYN_STRATIX is not set
# CONFIG_SYN_STRATIXII is not set
# CONFIG_SYN_STRATIXIII is not set
# CONFIG_SYN_STRATIXIV is not set
# CONFIG_SYN_STRATIXV is not set
# CONFIG_SYN_ALTERA is not set
# CONFIG_SYN_ATC18 is not set
# CONFIG_SYN_ATC18RHA is not set
# CONFIG_SYN_CUSTOM1 is not set
# CONFIG_SYN_DARE is not set
# CONFIG_SYN_CMOS9SF is not set
CONFIG_SYN_NEXUS=y
# CONFIG_SYN_BRAVEMED is not set
# CONFIG_SYN_ECLIPSE is not set
# CONFIG_SYN_RH_LIB18T is not set
# CONFIG_SYN_RHUMC is not set
# CONFIG_SYN_RHS65 is not set
# CONFIG_SYN_SAED32 is not set
# CONFIG_SYN_SMIC13 is not set
# CONFIG_SYN_TM65GPLUS is not set
# CONFIG_SYN_TSMC90 is not set
# CONFIG_SYN_UMC is not set
# CONFIG_SYN_ARTIX7 is not set
# CONFIG_SYN_KINTEX7 is not set
# CONFIG_SYN_KINTEXU is not set
# CONFIG_SYN_SPARTAN3 is not set
# CONFIG_SYN_SPARTAN3E is not set
# CONFIG_SYN_SPARTAN6 is not set
# CONFIG_SYN_VIRTEX2 is not set
# CONFIG_SYN_VIRTEX4 is not set
# CONFIG_SYN_VIRTEX5 is not set
# CONFIG_SYN_VIRTEX6 is not set
# CONFIG_SYN_VIRTEX7 is not set
# CONFIG_SYN_ZYNQ7000 is not set
# CONFIG_SYN_INFER_RAM is not set
# CONFIG_SYN_INFER_PADS is not set
# CONFIG_SYN_NO_ASYNC is not set
# CONFIG_SYN_SCAN is not set

#
# Clock generation
#
CONFIG_CLK_INFERRED=y
# CONFIG_CLK_HCLKBUF is not set
# CONFIG_CLK_UT130HBD is not set
# CONFIG_CLK_ALTDLL is not set
# CONFIG_CLK_BRAVEMED is not set
# CONFIG_CLK_PRO3PLL is not set
# CONFIG_CLK_PRO3EPLL is not set
# CONFIG_CLK_PRO3LPLL is not set
# CONFIG_CLK_FUSPLL is not set
# CONFIG_CLK_LIB18T is not set
# CONFIG_CLK_RHUMC is not set
# CONFIG_CLK_DARE is not set
# CONFIG_CLK_SAED32 is not set
# CONFIG_CLK_EASIC45 is not set
# CONFIG_CLK_RHS65 is not set
# CONFIG_CLK_CLKPLLE2 is not set
# CONFIG_CLK_CLKDLL is not set
# CONFIG_CLK_DCM is not set
# CONFIG_PCI_SYSCLK is not set

#
# Processor            
#
CONFIG_NOELV=y
CONFIG_PROC_NUM=1
CONFIG_NOELV_RV64=y
# CONFIG_NOELV_RV32 is not set
CONFIG_NOELV_XLEN=64
# CONFIG_NOELV_HP is not set
# CONFIG_NOELV_GP is not set
CONFIG_NOELV_MC=y
CONFIG_NOELV_FULL=y
# CONFIG_NOELV_LITE is not set
CONFIG_NOELV_FPU=y
# CONFIG_NOELV_NOFPU is not set
CONFIG_PROC_TYP=2
CONFIG_PROC_S=1
CONFIG_PROC_LITE=0
CONFIG_PROC_NOFPU=0

#
# VHDL debug settings       
#
# CONFIG_IU_DISAS is not set

#
# NOEL-V subsystem GPL settings       
#
CONFIG_PROC_NODBUS=y

#
# L2 Cache
#
# CONFIG_L2_ENABLE is not set
# CONFIG_L2_LITE is not set
# CONFIG_L2_ASSO1 is not set
# CONFIG_L2_ASSO2 is not set
# CONFIG_L2_ASSO3 is not set
CONFIG_L2_ASSO4=y
# CONFIG_L2_SZ1 is not set
# CONFIG_L2_SZ2 is not set
# CONFIG_L2_SZ4 is not set
# CONFIG_L2_SZ8 is not set
# CONFIG_L2_SZ16 is not set
# CONFIG_L2_SZ32 is not set
CONFIG_L2_SZ64=y
# CONFIG_L2_SZ128 is not set
# CONFIG_L2_SZ256 is not set
# CONFIG_L2_SZ512 is not set
CONFIG_L2_LINE32=y
# CONFIG_L2_LINE64 is not set
# CONFIG_L2_HPROT is not set
# CONFIG_L2_PEN is not set
# CONFIG_L2_WT is not set
# CONFIG_L2_RAN is not set
# CONFIG_L2_SHARE is not set
CONFIG_L2_MAP=00FF
CONFIG_L2_MTRR=0
CONFIG_L2_EDAC_NONE=y
# CONFIG_L2_EDAC_YES is not set
# CONFIG_L2_EDAC_TECHSPEC is not set
# CONFIG_L2_AXI is not set

#
# AMBA configuration
#
CONFIG_AHB_DEFMST=0
CONFIG_AHB_RROBIN=y
CONFIG_AHB_SPLIT=y
CONFIG_AHB_FPNPEN=y
CONFIG_AHB_IOADDR=FFF
CONFIG_APB_HADDR=800
# CONFIG_AHB_MON is not set
# CONFIG_AHB_DTRACE is not set

#
# Debug Link           
#
CONFIG_DSU_UART=y
# CONFIG_DSU_JTAG is not set

#
# Peripherals             
#

#
# Memory controller             
#
CONFIG_AHBSTAT_ENABLE=y
CONFIG_AHBSTAT_NFTSLV=1

#
# NANDFCTRL
#
# CONFIG_NANDFCTRL2_ENABLE is not set

#
# Ethernet             
#
# CONFIG_GRETH_ENABLE is not set

#
# UARTs, timers and irq control         
#
CONFIG_GRGPIO_ENABLE=y
CONFIG_GRGPIO_WIDTH=20
CONFIG_GRGPIO_IMASK=FFFE

#
# SPW
#
# CONFIG_SPWRTR_ENABLE is not set

#
# CANFD
#
# CONFIG_GRCANFD_ENABLE is not set

#
# HSSL
#
# CONFIG_GRHSSL_ENABLE is not set

#
# VHDL Debugging        
#
CONFIG_DEBUG_UART=y
